We thought we bought a quality product when we remodeled our kitchen two years ago and put in a $3000 30 inch wall oven from Dacor through their dealer Friedman’s in Knoxville. We had heard for years that their products were top notch and high-quality. I find it interesting that the oven has a self-cleaning function. However Dacor Technical advised me that if you use the self-cleaning function you will create too much heat and destroy the motherboard. Wonderful input after the fact. The oven now does not keep a correct temperature and we are advised that our oven is two years old and out of warranty and we should not have used the self clean function. Really? Why is the button even there. Do not under any circumstances purchase any Dacor product. I feel comfortable in saying Samsung will add absolutely nothing to the quality or service. The lack of customer care and concern is beyond reproach. One star rating is way too generous. How do you just walk away from your products. We used our clean function exactly once and nobody ever said it was a self destruct button.

This is our second Dacor wall oven. It is approximately 6 yrs old. December 22/14, I was cooking a Christmas turkey as per usual, and I noticed an odd smell about 40 mins. into cooking. Checking the turkey, the temp. was at 500 degrees and on broil. I burned holes in my oven mitts on the roaster taking it out. Even though I set the temp. at 325 convection roast, it reset itself to 500 broil. Nothing works except the clock. Called repair guy after the holidays. Said it is a control panel behind the keypad area. Ordered the part. Been waiting 4 months now for this part. Now, no Easter dinner either. After reading these complaints, I am worried that this part replacement may not be the end of it.

We have a 2 year old 36 inch, Model EF361WF refrigerator. Water began pooling at the base every 2-3 days. Called Dacor Customer Service Team. Pitiful response and horrible customer service. Had to call private technician who was very surprised that a so-called higher end appliance was not factory-fitted with a P trap. He sees the problem often with cheaper models. Dacor has let us down twice. Buyer beware: sub-standard products matched with sub-standard customer service. Dacor will never get our business again and we would recommend all potential purchasers to consider other brands.

I have owned a Dacor dual fuel 6-burner range for several years. I paid approximately $5,000 for the product. It has proven to be totally unsatisfactory. The gas burners click and make noise whenever you try to turn the burners down to a low temperature. The cook top is very hard to clean. The range is a constant problem. It smells bad, does not heat up promptly, and the broiler feature is always a problem. A gas oven is supposed to heat to and keep a constant temperature - the Dacor does not. The broiler will not cook food evenly or well. The door to the oven will not close properly and is constantly partially open. The hinges do not seem to work properly.Most importantly, I have tried on many occasions to get Dacor to do something about the defective product. They have been totally non-responsive. When I did finally get somebody to come and look at it, they spent about 2 hours cleaning it, accused me of using the wrong cleaner on the cooktop, and presented me with a bill for $800. I asked if they would just give me my money back and take the defective product with them. DONT BUY DACOR.

The range cost over $7,000. In the first 2 years multiple malfunctions in the mother board, the convection oven functions, and had to hire a local company to repair. The Dacor company did not care. Called them multiple times, wrote them and received no assistance or response. Repairs cost $$$$ to fix each time something broke.

Purchased a Dacor Epicure ER36DSCH/NG RANGE and oven in 2007. Sad story, it never worked properly since day 1. Initially a gas burner did not light, they came and repaired it. Subsequently the door lock failed in the lock position - had that repaired. The door lock failed the next year again, this time thanksgiving, ruined the dinner. They fixed it but the following year the lower burner element failed at Thanksgiving. All my relatives know not to purchase a Dacor product. Problem is I am stuck with this boat anchor. The oven door motor has failed 3 more times and thankfully the service man showed me how to change it. Today we tried to bake some apple pies and found the oven temperature set at 450 was only 350 (bought an oven thermometer). This explains why it always takes so long to bake things. A complete piece of **, never ever buy one.

2017 purchased 36” range. First year- self cleaning overheated, replaced part. That was in 1 years warranty. But now: only 3 years barely: (I dont even cook much). Oven turns off by itself if I open the door. Oven does not turn off when I am done cooking. If I cook 450f pops warning of temp overheat. Called ABT service (this is where Dacor said) it cost $219 for a service guy to call dacor and to give me answer: I think it is android board. I have to buy a board. Plus per Dacor this board will not have wifi. So there is no Discovery- paid extra for extras I can not have...

We purchased the Dacor modernist Refrigerator, after waiting several weeks to get it installed we noticed the water dispenser did not function properly, we contacted the retailer whom we purchased the appliance from and after several back and forth emails to verify our proof of purchase they put us in touch with a repair technician. After a few days they came to our home to review the issue and noted that this was a known design issue with the refrigerator and that our house water pressure maybe too high and they would have to come back out and install a special valve to fix the issue. Later they called and said Dacor will not acknowledge this as their issue and to call a plumber. After spending over $20k on Dacor appliances I would have thought their white glove VIP customer service would be better. Buy Viking!

Purchased Dacor Renaissance wall oven in July 2015, Model RNO130S. After less than a year and a half, the cooking temperature began to fail. For instance, set to bake at 425 degrees, the oven would appear to heat properly, but tried and true recipes would be pasty and uncooked at the expected time. I inserted an oven thermometer inside to test and found an erratic pattern of oven heating up properly to 425 but then sometimes dropping back to about 350 during cook time and refusing to ever reach 425 again. ABT repairman adjusted temperature calibration but refused to troubleshoot any further. Just ruined another dinner. Thanks Dacor and ABT for your unreliable product and poor service.

Dacor customer service contacted me and worked with me and the appliance repair company to get the proper parts to fix the oven. Everything is fine! We once again really love our Dacor wall oven.

I emailed Dacor for information about how to get my range fixed and was amazed. My questions were answered complete with numbers for model and needed replacement parts along with contact information for local service folks. Amazingly good service. Bravo, Tori **! Give that woman a raise!

My wall oven spontaneously heating to 800, will be fixed! Thank you, James of Dacor for contacting me again and for arranging for my wall oven to be repaired at no cost. When our oven is in top working order, we love the convection option and we love the internal temperature probe. The people at Dacor offer the friendliest service I have ever encountered and I thank you so much for that.

Replacement light for the oven - I could not find anyone that carries the halogen bulbs for my oven and called Dacor parts line. The bulbs come in a package of two. They were $79.95. I was told I should have called two months ago, that they were $29.95. So would I buy another Dacor Appliance? I think not.

The first F1 Error needed a new membrane repair for $470.00, after 4 years of service. Now, the same F1 error after the new membrane is only 13 and 1/2 months in service and it is now out of warranty. Customer service people are rude and unhelpful but when pressed, they said they might be willing to help after a service tech, which I have to pay for, diagnoses the problem.Even the Sears store people advise their customers not to buy Dacor products and that is sad because it is one of only 2 American made options. Dacor needs to step up their product engineering, commitment to quality and get rid of the rude phone people in Customer No Service. This is not the end of this experience but the only reason I am not junking the stove is because a comparable replacement is another 3000 bucks from another vendor which I cannot afford at this time.The irony of this is that the company clearly knows they have problems but when I asked if the replacement parts had been improved so the problems wont persist, I was told that no changes or modifications to the electronic brains had been made. How stupid is that! They are just asking for more problems with the parts they send you to fix what does not work.

If anyone else has this experience with Dacor ovens, we need to have a class action suit against Dacor! While baking Christmas cookies this week with my grandchildren, my ovens stopped working and started beeping. The error code was F3. I was able to get a technician rather quickly who diagnosed the problem as a failure of the control board which affected both ovens. The replacement part was discontinued from production in 2011. My ovens are 12 years old and cost over $4,000 at the time. What a pickle I was in a week before family coming for Christmas dinner!The technician said my only recourse was to send the control board to a refurbisher and he did not know when the board would be fixed - all for a whopping costs of over $600.00! I find it unacceptable that Dacor discontinues a control board and forces the consumer to either buy new ovens or pay the cost of a refurbished part that I hope will work. After spending thousands of dollars, how does this happen? What can be done so the consumers who purchase appliances with good intentions are protected from manufacturers that dont stand behind their products? DACOR I NEED ANSWERS!!

We purchased a Dacor Epicure Range for approximately $10,000 and have had one repair after another because the burners leak gas, endangering our family. Weve spent almost $3,000 on repairs and the repairman has told us that hes never seen such a pervasive gas leak. To manage the cost of repairs, weve literally turned the gas and stove off for periods of time to cook on other appliances. While I love the design of the stove and specifically selected it over Wolf and other high end brands, I now wish I had gone with another brand. I have reached out to Dacor about this but they have not been willing to stand behind their product.

My oven would not work. Neither the broiler nor oven element would heat. The dealer from whom we purchased the range had gone out of business. So, I wrote to customer service on the Dacor site. Dacor customer service was back to me within 24 hours with a suggestion on what might be wrong. My husband followed the easy directions and my oven is now working! I am very happy with the prompt reply from Dacor customer service. They even provided a dedicated phone number if we had problems.

As I have read in most of the reviews, we have also experienced the control panel on our 30 inch dual range cracking over the years. We were told not to replace it because it would continue to happen. Ok, lived with that... Now something new has started to happen, the plastic handle on the oven door and surrounding area has started to melt. It got so bad after a self clean that it is collapsing. Now there isn’t much of a seal at all when the door closes. The stove isn’t brand new, but this has to be a fire hazard, and consequently, now the oven will not even turn on. I’ve reached out to Dacor with no response yet. I’m done with this company!

I have a induction Dacor stovetop. Its stopped working and blinks an error code. Called customer service who didnt know what the code meant. I was told my model was 2015 which the rep said was old. It was installed in 2017. All they would offer was cheaper replacement parts if I paid for someone to come and figure out what the problem was and install the parts. I was told the replacement parts were not cheap though. I was told that because were the second owner of the house they couldnt fix it under warranty (even though it should be covered under warranty) because they couldnt say how it was used before (commercially or residentially). Give me a break!It gives me almost no confidence in getting this thing fixed. Warranty is a joke and customer service is terrible. So far I had to leave a voicemail for the reps next level who will call me back after the weekend. Im waiting to see what (if anything) they will do but from the first rep. I dont have a lot of confidence in their products.

I bought DCM24S DACOR 1.5 CU CONVECTION MICROWAVE-SS and after few months of using this product its banded on the back wall of the microwave that supposedly resulted from improper turntable placement which caused the turntable tray to make contact with the back of the oven. The quality of the product is very poorly, dont buy Dacor product!

Don’t purchase Dacor appliance - it’s been worst purchase experience ever and I am extremely disappointed. After six months since I purchased the Dacor built-in refrigerator, Dacor couldn’t even ship the proper installation parts and my refrigerator is still not working. Problems:1. Their high end $11K Dacor built-in refrigerator cannot even be installed. Wasted five months communicating with both Dacor and the retailer AppliancesConnection. After five months they were still able to ship the proper missing installation parts. Over the past five months, I talked to six different team members in Dacor customer support team, escalated to customer support lead and also talked to their regional technical manager, none of them is able to solve my problem and ship the right installation parts.a) Their process is extremely messy. Their customer support team had no idea about installation requirement of the refrigerator. And the request from their customer support team is declined by their internal Parts department again and again, only to find out installation parts should’ve shipped by the retailer. This is extremely confusing now and no one in the team seems to understand the right process.b) After Dacor acquired by Samsung, their manufacturing process is very messy and parts are extremely confusing. There’s one version of required installation parts in Dacor manual and one version of Samsung parts in the Parts guide, and no one in the team seems to understand the difference and how to map from one to another (they insist on sending me Samsung parts instead, claiming they’re compatible). I am now the expert myself to understand all their parts and able to identify many problems in their manual.2. As a high end brand, Dacor doesn’t seem to care about their customer at all. As a customer who did kitchen remodeling and had no refrigerator to use for five months, no one in the team seems to care about their brand or their customers. With this huge gap in the process, no one thinks about the problem from their customer’s perspective or shared empathy with me. Dacor as a brand is really bad and I am extremely disappointed in both their product and services.

In 2008, I purchased my dream home and had the opportunity to build my kitchen from scratch. At the time, I shopped Viking, Sub-Zero, Wolf, and Dacor. I made an appointment to tour the Dacor showroom and was blown away by the aesthetics and advertised performance of their line. I made the decision to fill my kitchen with Dacor products: dishwasher (ED24SCH), dual range (ER48DSCH), range hood (EH4818SCH), fridge, and microwave (DMT2420). To date, the fridge is the only appliance that has not malfunctioned. Within the first month, the microwave blew a fuse (covered by warranty). Within the first 6 months, the dishwashers motherboard blew (also covered by warranty).Since the 1-year warranties have expired, the range hoods electrical unit malfunctioned and ceased working properly ($400-plus in repair). The motherboard on the dishwasher has gone out twice ($1200-plus). The dishwasher rack has completely rusted and the wheels have fallen off ($800 to replace). The lights on my oven dial is out and the glass bottom inside the oven that covers the heating element has cracked (nothing has been spilled or dropped). In fact, I only use that side for Thanksgiving. I am extremely bummed (to say the least) and I feel that the products that I was sold do not live up to the quality level that they advertise. Additionally, the replacement parts are obscenely expensive, and at this time it makes more sense to replace the units rather than dump more money into a pit.

After purchasing what I thought would be ovens of a lifetime I could not be more disappointed, frustrated and angry at a company in my buying history! Since November of 2014 and longer I have been fighting for service or answers or at least honesty! The ovens have never worked properly, they do not keep temperature. The oven temperature drops 60 to 75 degrees while cooking over a couple hours. The control board was replaced. Still the ovens never worked. If you like to cook and cook for the bed and breakfast, which is why you bought an oven like this, you will have your ovens on for a couples hours preparing any multi-dish meal! I was treated rudely on the phone during routine troubleshooting and was never allowed to speak to a manager. Dacor for months or so later is buying back my ovens minus a restocking fee, on ovens that dont work, $1200!

My Dacor Double oven is less than 5 years old. Lately, the broil function has stopped working well on both ovens. I contacted the ONLY authorized Dacor repair center - Home Appliance Repair GTA (HARGTA) and told them my broiler wasnt working well. Their repair technician came to my house, took both double oven doors off in order to give me the assessment – that my upper broil function was not working well. In fact, both upper and lower do not work well but thats a side issue. In the process, the technician broke or did not properly reinstall my double oven door. I called and he returned and again, removed BOTH oven doors. Now, my upper door is working well but my lower door has no hinge and falls hard and heavy. This is extremely dangerous. I have left multiple messages with HARGTA and they are not getting back to me. Ive even contacted DACOR which is only in the US and they havent gotten back to me either. I purchased a Dacor oven to get a quality appliance and excellent after care service. It appears that both the appliance and the aftercare service do not live up to their reputations. P.S. The quote to repair 1 broiler is $750 after less than 5 years of use. That will equal 1/4 of the oven cost in less than 5 years.

I completed a 7-month total remodel of our kitchen and family room, which were connected in November 2007. The kitchen remodel cost $18,000 for various Dacor appliances including the Millenia series of wall oven MOV130S; warming drawer MWDV30; and 42 island hood DHI42130. The remaining includes the huge 30 Epicure dishwasher ED30SCP, 36 cooktop EG366SCH, and beverage center EF24LBCSS. All have the beautiful copper accent package and make for highly attractive appliances. We constantly receive accolades for them. If only they werent absolute garbage functionally and reliability-wise. Others have remarked how the ignitors on the cooktop continually spark, even after the light off. After contacting Dacor and waiting 2 weeks for the repair, for which Dacor sent the wrong part and caused another 2-week delay, the repairman had to rip off the front accent lip of the cooktop to reach the base which significantly dented the front lip. The ignitor worked like a champ for 2 days, then click, click, click - constant ignitions. So I cleaned around the ignitor tip with 409, dried it and it worked flawlessly. Thanks Dacor for your own product ignorance and my now dented cooktop. It has worked well since and is a sound product, so far. If only my luck held out.Next, the wall oven. Very beautiful and my control panel has held out (fingers faithlessly crossed). The oven isnt calibrated though, so follow cooking directions at your own risk. This oven will burn your food if you set the temp and timer to the recommended settings. I have to take off 25-50 degrees and 5-10 minutes of requested cook time or I will smoke any meal. After 2 years of use, I decided to use the cleaning cycle - following the directions to the letter. Forty five minutes into the cycle and kaboo! The front window shattered. Dacor says $700+ for glass replacement; I say send me the part and Ill do it. I got the discounted part for $68; spent 3 hours cleaning and reassembling with care; and the window has held, but I havent tried the cleaning cycle since. Why roll the dice again?Ah, now my fave garbage Dacor appliance - the interminable dishwasher. Truly engineered by the diabolical. I just completed my fourth major repair after 5 years of use. First, the drain valve failed after a few months of use causing flood and was replaced under warranty. Then the door seal failed (more flooding) and was also repaired and replaced under warranty. The dishwasher stinks, by the way, as the unit cannot evaporate effectively during drying cycle due to ridiculously poor rear venting design. So I have to leave the door wide open for hours after use to facilitate drying and stench reduction. The control panel/circuit board has fried twice now in the last 3 years - it just starts erratically beeping and refuses to take input, even with a power reset. Both technicians stated the design and quality of the board is third world, which likely is exactly where Dacor outsourced the garbage.The island hood and warming drawer have worked well, and the beverage center has been reliable but maddeningly causes back left cans of soda to freeze and explode occasionally; even with the set temperature raised to now 45 degrees. Fun to clean up after coming home from a long trip. My expectations are so laughingly low now for these Dacor products that I dont bat an eye with the frozen soda muck this fridge occasionally produces. Customer service though has been helpful and thankfully, American. They have replaced both circuit boards for free well out of warranty. I have only appreciation and great sympathy for the customer service folks who Ive spoken with. I love my kitchen, but hate the appliances in it. Never again Dacor. Never again.

Talked into spending $4700 on a wall oven on the recommendation of an appliance retailer. My concern was even baking and reliability. Was told I would be very happy as Dacor was best on the market. Well long story short, it never cooked evenly and after 8 years quit working. Had to lug the heavy oven to the city to an approved service provider. They thought it was the relay board (told the brains of the oven). Service provider changed several things (sensors, board and whatever else). Nothing solved problem. Phoned me and said I was looking at minimum $2000 and up. He threw oven in garbage. We didn’t even send the gas money to bring the dud home.Thought it should last longer than 8 years. I phoned Dacor. They wanted to know exactly what the problem and diagnosis was so I told them to phone the Service Provider. Said they would but I had to email copy of receipt which I did. A couple of months gone by and never heard a thing and they are not responding to my emails. DO NOT RECOMMEND DACOR.

I purchased a DACOR PGR-30S LP in 2002. It has had a number of problems due to poor design that required replacing the control panel as well as other parts. However, it has recently developed a gas leak and thus is no longer usable. To fix the gas leak, you must take off the top burners to get to the leak and make a repair. UNFORTUNATELY, DACOR has to make room for new parts and no longer makes the O-Rings required. Yes, apparently a $10 O-Ring takes too much room seven years after I bought my range. So, in 2009, DACOR discontinued making the O-Rings and now I have a very expensive paperweight that I have to take to the dump so that I dont blow up my house. I wouldnt ever buy a DACOR again. The customer service it terrible and they cant even be bothered to carry simple repair parts. Buy a Wolf or some other high end stove because DACOR is literally a piece of junk!

Dacor Fuel Range broken door - My Dacor is by now 13 years old. I see from other reviews that the problems I have with my range have not been addressed in newer models--the same problems exist. When I received my Dacor, there was a crack in the front, above the door. It was small, and Id just had a baby so I let it go. I noticed that the door did not close either, and because I did not address it within a year, Im out of luck. But youd think that making an oven with a door that closes snug would be a top priority. It only closes properly when in cleaning mode. My oven window became brown and I cannot clean it. Its a shame that these things are messed up because the convection seems to work wonderful and the oven is fairly attractive. If the door closed all the way. Im getting ready to consider a new oven. Wont be a Dacor.

We purchased a Dacor Oven model # ECS 136544 in 2009. Within two years, the relay board and thermostat in addition to an LED bulb required replacement. A year later, the broiler heating element and the second LED light required replacement. Dacors response (800-793-0093) was read your explicit warranty and the implied warranty under Section 2-314 of the Uniform Commercial Code isnt applicable. The total expense for repairs is over $1,000. Did we get a lemon, or are Dacor ovens prone to failure? Should we have been thinking Wolf?

The enamel on the bottom of the top oven has blistered and the metal beneath is exposed. If the oven is heated, there is a chemical smell. This is such a dangerous situation that the ovens (double) are being removed as I write and will be replaced with a different and more reliable brand.

Got a great online deal on Dacor LP gas range. Was new but had dinged side panel according to store. Couldnt see the ding in photos and it would be hidden against cabinets anyway. Range is finally delivered and is new as advertised. Works great for a few days but then the oven wont hold temperature and then wont light. This is when the nightmare begins. Samsung now owns Dacor and getting to the right people to make a warranty claim is insanely difficult. After making the repair claim we get notified that there is no warranty coverage for service as this was not a new unit. Pardon me but we have the sales receipt showing that it is with full factory warranty. They finally agree to accommodate us and then repeatedly cancel repair tickets. After many calls to fix this, they now tell us that no service center will come to repair the range! They offered a refund minus some sort of discount based on a stove being used for a period of time. Oven stopped working a week into having it and they want to DISCOUNT a refund! Made BBB complaint and their response was they would have someone reach out to the customer. Today they did that and we are still at no resolution. Told them they have 3 options, fix the range, replace the range or refund us completely and I will make arrangements to fix the oven. They say there are no ranges in inventory to replace this one with with. No one inside the US will call or reach out to fix this fiasco and we are left with someone that is not allowed to make decisions that speaks english as a second language. Sad thing is that its a basic range that at first seemed to be a great design and would be great to have in our kitchen. Its now endless headaches because Dacor refuses to step up and remedy a defective oven part with a service call from someone that would require likely higher pay than their network providers.

We purchased Dacor appliances twice, (double ovens, warming drawer and gas cooktop), after our first flood, and then again, after we flooded from Hurricane Harvey. (Dacors customer service was excellent in helping us replace all our appliances when we were going through such a horrific disaster because the vendor we purchased our appliance from the first time, wasnt in business anymore.) We were very satisfied with our appliances the first time we remodeled, that we purchased them again, and have not had any problems. The ovens heat up quicker than other high-end ovens and the range top cooks evenly and looks beautiful. I would purchase again, but hopefully, I wont have to.

We have a new (one year old) home with Dacor appliances. The microwave oven went on the blink the first month but was repaired by a factory approved repairman. Something to do with the computer. Now the double oven will not hold a temperature. We set the oven at 420 and it only goes to 360 even though the readout shows 420. We just decided to skip the repair process and bought a new Wolf oven. This is our second Dacor within the past two years and both have had the same problem. Dont waste your money.

Ive had this range for two years and am replacing the control panel for the second time. 1st time during product warranty and second time out of warranty. The range is beautiful but apparently the electronics are bad. And to add insult to injury Dacor doesnt stock replacements but has them assembled when needed. Estimated wait time for a new panel is 3 weeks; so no oven for 3 weeks and now not a lot of faith that the new board will be any better than the last one.

Years ago I purchased the Dacor Double Oven over a Thermador because the Thermador had a ridiculously long pre-heat time. The Dacor has performed reasonably well as a oven particularly in convection-bake mode. But over time, components started failing and repair parts were hard to find, unavailable or ridiculously overpriced. I am an an engineer with DIY skills honed from years working with high tech food manufacturing equipment and controls including ovens. In recent years, I have needed to replace a relay board, the main control board, hinges two times, and most recently the hinge receptacles. I have also replaced an inner panel on a door assembly. Just think what such repairs would have cost for an average consumer. I understand the parts can fail, but Dacor has shown little regard for consumers in my opinion. They have done very little to maintain an inventory of repair parts. Basically their message is that the part is now obsolete and unavailable. Thats some answer when the price of a new double oven is multiple thousands. Recently, the hinges on my upper oven failed again. As they failed, their failure caused increased wear on the hinge receptacles. Soon the receptacles failed as well. I was able to find hinges at a ridiculously high price but the receptacles were unavailable anywhere. I contacted a several parts suppliers who told me that they had no idea when the parts would be available. Moreover at least two of the suppliers mentioned that they had a backlog of orders for the receptacles - one had a backlog of over thirty. Yikes!. At that point I contacted Dacor customer service and asked what could I do to get the part. Answer: The part is unavailable and we have no estimate on when it will be available. I tried to escalate my request and got nowhere. Finally after many hours of online searching, I found one set of the hinge receptacles at a price 4X last years price. Lastly as I replaced the receptacles today, I realized that the mounting screws only hold one portion of the U shaped mount. If the screws were longer, the receptacle would be less prone to twisting and wear. Be aware that Dacor was sold to Samsung a few years back. Based on my experience, I could never recommend Dacor. Caveat Emptor!

I was and, I repeat, was a loyal Dacor customer. I gutted and rebuilt a kitchen 9 years ago and purchased a Dacor stovetop, oven and microwave. I remodeled my new house 5 years ago and again purchased Dacor stovetop, oven and microwave. Consumer reports provided favorable reviews of the appliances I purchased below.First red alert: The oven Model MORS130S and Microwave Model DCM 24S LED did not match. The microwave was green; oven was blue. The brochure was in black and white so there was no way of knowing that aesthetically they were a mismatch ... it was very sloppy(!) and very deceptive by Dacor. I mean when I waited weeks for my appliance order and the oven is already installed with a big fat ugly LED screen, what was I supposed to do, yank it out and start all over again? This was disappointing!Next, I was simmering chili on the stovetop (5 burner, gas) and, lo and behold, 18 flames started exiting through the turn knobs resulting in a meltdown. The gas was leaking through the tubes underneath the stovetop. I just happened to check the chili while I was gardening to watch the house almost burn down and btw, it was difficult to put out the flames because the natural gas was leaking under the unit. Seriously! I called customer service and they got hopping right out to fix the issue. This scared the heck out of me. It is negligent to have a product like that on the market.After about 13 months into the life of the Model MORS130S oven, the touch panel failed emitting a CO1 error message. I was told it was $140 to fix it and that the panel was defective, great quality there, Dacor. And the added joy to the CO1 error message is that the unit beeps intermittently all day and all night long unless the power to the oven is killed. Joy... now another issue - Model MORS130S oven LED lights are burning out. Seriously, what else will there be? Now its $175 for LED panel and another $100 to install by an authorized Dacor service man.So I called Dacor back again today because the LED light out was annoying me. They offered nothing. To be fair, my appliances are out of warranty but seriously, Dacor nearly burned my house down. They should be winning me back as a customer if they really cared about their customers and having long term repeat business. Never again, Dacor, never!

We got a U43 relay error on our Dacor oven of 4 years. When we finally add up the cost to replace the part, it will exceed $500 and Dacors only response is, Sorry, it is out of warranty. Of course I do not understand why a relay board on an oven would short out after a few years. Not happy and would not recommend the manufacturer.

We are in the process of remodeling our house including an entire new kitchen that we cant wait to finish to invite people over and show. HOWEVER, the cook top already has a light burned and finally the cover of it ended up falling as I was wiping down the stove (very softly by the way because I like to treat my appliances really nice). We have had this stove for less than a year I havent even made the last payment and it is already with a light burned out. REALLY? My husband spent countless hours researching the best appliances and decided to get this one and to come to find out that it is not good it is a complete disappointment. I am sooo upset. DO NOT BUY THIS BRAND!!! Save yourself the hassle that we are now going to go through trying to get a hold of someone on the phone and see what they will do if anything. I bought it from AJ Madison.

I owned a 36 Dual Fuel Epicure range that required at least an annual repair for the same thing. The control pad (the pad with the buttons that controls the oven and light) would fry. This would cause the oven light to come on and off like a strobe light. Luckily, I purchased an extended warranty from the vendor, as each time this was replaced it was $750+ to repair. When I complained to Dacor on their support line, the representative actually told me that I was running the oven too hot!About 6 months ago, I sold the house and left the very expensive range behind. It was problematic from day one. Other repairs included replacing the ignitors. After a year of use, the insulation on the door came loose and was hanging in plain view through the window on the door. Every repairman that came to service the range said the same thing.... that they repair a lot of Dacors. When it worked, it was a great range. If you do buy a Dacor, do yourself a favor, buy the extended warranty. You will need it and it will pay for itself.

I purchased a Dacor range hood 3 years ago. I had an intermittent problem from the start, as one of the two lights would intermittently go off. Replacing the bulbs didnt fix it. As one light worked perfectly, it became a tolerable issue. Finally, I was having other electrical work done in our home & I asked my electrician to look at it two weeks ago. He figured out that it was a defective lamp housing that incorrectly held the lamp bulb. Dacor shipped me a replacement lamp housing for me at no charge. I installed it this last weekend and it is running fine. Thanks, Dacor!

We purchased this high end Dacor range (Dacor Renaissance ER30G) new in 2011 from the Appliance Loft here in Cincinnati. It was dropped off and installed and would not operate right out of the box. A repair was made and everything worked (unless you count the indicator lights on the knobs, they all went out after approx 14 months). This past November the oven went dead. A1 appliance came out: Determined new control board needed, ordered and installed. Thanksgiving Day, oven dead. A1 comes back, reset the High Temp Fuse. Oven dead 4 days later, A1 returns with a new HTF. Dec 22, Oven dead. As soon as The holiday is over we will call another repair shop and start looking at replacing this unreliable piece of eye candy. Open comment to Dacors design engineers, quality control engineers and management. You should be totally ashamed about this product youve designed. You are supposed to represent the best in American design and quality and this falls below that of low end appliances out of China. See you in small claims court.

Dispenser spits out ice cubes onto wood floor everyday. Told it is design issue and nothing can be done. We have to constantly check the chute is empty after used but we can be nowhere near the fridge for hours and hear ice pop out onto floor. My grandson has tripped and fell and me also. Im more concerned for safety than anything. Also our hickory wood floor is concern.

My Epicure dishwasher is being replaced after 4 years of use. The racks are rusted. It leaks. And the spray arms are broken in two. The dishes need to be completely washed before putting in dishwasher. Do not purchase Dacor dishwasher.

We remodeled our kitchen in 2002 and chose the Dacor 36 dual-fuel range. I was preparing a pork roast for a dinner party with the oven on Bake. The roast was just not coming up to temperature, though the display indicated that the oven was at the temperature I set. I wound up slicing the roast and cooking it on the griddle; my hungry guests were getting restless. Then I tracked the oven heat for an entire day with an oven thermometer. The oven would come up to temperature and then cool off. I sent these numbers to Dacor and asked customer service for an explanation. Believe it or not, the conversation was--Dacor: The temperature is going down because the fan is coming on. Youre not supposed to use the Bake setting, but only the Convection Bake or Pure Convection. Me: Why is the Bake button there, then? Dacor: Were taking it out in the next production run. (This hasnt happened. My sister-in-law bought a Dacor last year before I could warn her and the button is still there.) Also, after using the self-clean one time, I noticed a crack on the inside of the oven door, starting in the corner of the window. The inside of the window is now permanently spotted with baked-on grease. Now my oven does not work at all. The repairman says that the circuit board needs to be replaced, and if Im lucky, it will work for a couple of years. The repair will cost around $700 including labor. The repairman told me that some repairmen in our area will not even work on Dacors because there are so many problems. Im considering replacing the stove... a very expensive mistake. Beware of Dacor products.

We bought a 36 inch Dacor range with oven last year, around September, when we moved in to our new house. We tried to turn the oven on Thanksgiving day for 10 people, but it would not work. We called for service, and they replaced the circuit board. The repairman turned the oven on, and it worked fine. We never used the oven, just the burners on top, because we have a second smaller oven, we like to use for every day cooking. Then came Christmas day, and we were having 30 people over, so we went to turn on the Dacor oven, but to our horror, it did not work again. We have owned this oven for a little over a year, and have tried to use it only twice. In that time, both on holidays, with a lot of people to feed. This time, when I called for service, they told me I will be charged $198, because when they tried to get Dacor to drop that charge, they said no. We are very disappointed in Dacor for not caring more about the customer.

Wish Id known Dacor issues when buying my oven. (Primarily for style - yes, assumed it would function as stated; high end brand). Thank goodness I DID NOT BUY other Dacor appliances. My 30-inch Dacor oven/cooktop burners work but finish started coming off quickly. Above range microwave handle broke within a year. MAIN PROBLEM: OVEN DOOR either wasnt properly installed because it doesnt close flush with unit or its hinges have loosened over the years. Although oven eventually heats, it takes forever. After examining door hinges closely, looks like oven has become unhinged - as have I. No loose parts seen. Recommendations? Other than STEER CLEAR OF DACOR.

Lemon appliances. The dishwasher breaks every 6 month. The gas range top breaks every 6 month. The Microwave breaks every 6 month. Awful products!!!

The oven I purchased is the Dacor double oven, model number - ECD230SCH, I purchased extended warranty on the ovens. This was purchased when I bought the ovens. I have renewed this and still have a warranty for 2 more years. I cannot get anyone to do the repair on this oven. My location is at the Sardis Lake. I cannot get anyone out to service. I do not know if you have any thing to do with this. I have had an oven out since June 2013. Please help, Dacor should have service reps in this area. I am in Sardis Ms.

In 2010 we purchased a new Dacor Epicure Stainless Steel 42 refrigerator/freezer. Weve had to replace the freezer heating element (twice) because it fails and then the freezer ices up causing the system to stop cooling. This past week the fan began making a noise and so we had repairmen come out (yet again). Technician confirmed that the pan motor (fan in freezer) has failed. NO PART is available... I couldnt believe that parts wouldnt be available for a $10,000 high-end refrigerator that was purchased new only ten years old. I called Dacor directly and asked them how long they make parts available after they retire a model.The Dacor representative told me that they make parts available for 7 years. 7 YEAR PART AVAILABILITY ON AN APPLIANCE THAT SHOULD LAST 15-20 YEARS??? RUN AWAY FROM DACOR. Obviously customer service is low on their priority list. We will be replacing our gorgeous $10,000 ten-year old Dacor refrigerator/freezer (now a boat anchor) with Sub-Zero. Not too much more money than Dacor but they continue to make parts available for twenty years following model retirement. That is the kind of company that I want to do business with.

I have a Dacor cooktop, single wall oven, warming drawer, and dishwasher that I installed in my kitchen in 1992. That is 20 years ago. I have never had a problem or needed a repair on any of the appliances. They have worked perfectly. I hate reading about all the problems people are having with their Dacor appliances as I am about to do a major kitchen remodel and plan to go with Dacor again.

We used a new Dacor range vent only to have it go on and off. We called Dacor and they referred us to Desert Tech in La Quinta. The owner came out and said we needed a new unit for $775. We said just unplug it. He charged us $275 even though it took him less than 30 minutes. Stay away from Dacor AND Desert Tech!

Purchased Dacor Wall Oven EO130SCH in 2011. Rarely used, so never used the self cleaning function. Occasionally wipe with microfiber cloth, eco-friendly cleaners like vinegar and Bon Ami and elbow grease. First problem in 2017 when the oven would not heat up, just before I had guests coming to stay with us. Dacor repair personnel could not make it out for a few weeks, so repaired the issue myself by resetting the thermostat with some creativity and effort. Next problem in 2018 with a U43 relay board error. Can use it for a while if turn off the power to the fuse box for a while, but in 2019 it also started making a clicking noise, and basically not functioning right before I needed it for a party. Cant replace the relay board (which costs more than $300 for the part itself) without pulling out the oven. But why is the relay board failing so quickly? Is there a fan cooling issue? Have talked to Dacor. Poorly designed, poor quality. I would never recommend Dacor.

We remodeled our kitchen less than 5 years ago. As we have owned restaurants in the past, we wanted commercial quality appliances. I was looking at Sub-Zero and Viking or Wolf. Unfortunately I took my Home Center convince me to purchase A Dacor package. That was a mistake. Even though these appliances cost as much as the those brands, the quality is not even close. After spending $22,000 on appliances I have quickly discovered that these appliances are junk. First the microwave began to arc and nearly caught fire. Even when they installed my cooktop. I noticed that the burners in the middle were marked incorrectly and the blue LED indicating the burners are on was burnt out.After only a few years, now my ovens are not working. And right before Thanksgiving I am without ovens. My old ovens were almost 50 years old and worked fine. These $6000 plus ovens are not even 5 years old and are down. I am kicking myself for not going with my original plan. If you are considering Dacor, I would not recommend.

The Dacor (model ER36SCH/NG) burners work, but the oven & the broiler burners will not. The circuit boards were replaced twice 2 times, under warranty, but still fail. I have to un-plug, or turn off then on the breaker to reset the circuit board. Dacor states that they are aware of defective boards, but are working on new replacement boards (no board yet). Its going on now, for over 6 months. Is there any news? I am very frustrated!

Unfortunately, the screw broke in two that held our Dacor refrigerator door on and much to our dismay, the door fell off. Dacor was prompt and courteous in sending a replacement lower refrigerator door hinge to the service company and covered the full cost of labor even though they initially said the refrigerator was out of warranty (two years old). Our experience was positive with James who gave timely and a customer-focused response. He also called to follow-up after the repair to make sure we were happy which I appreciated. I hated that the door broke but was very pleased with the repair and the fact that I did not have to pay.

The glass plate in the bottom of the oven has been a disaster from day one. Anything that drops on it leaves a white mark that is impossible to remove. It finally became so discolored that I had to have it replaced; over$100 for glass and factory-trained repairman charged $285 to install, a ten-minute job. I wish someone had told me of the problems before I spent over $5,000 on a range which should be useable, not just pretty to look at which also doesnt happen when the oven is all stained. Burners are tinny and dont begin to compare with the Thermador I have in my other home. I will never purchase another Dacor product.

I have a 4 year old Dacor Renaissance 36 in gas range. The thermostat is broken, the self-clean cycle doesnt work due to a broken lock and the oven indicator light stopped working about 2 years ago. Pros: It is an attractive oven with the knobs that light up blue when on and the burners all work fine but that is it! The technician told me ALL parts I need are on backorder due to Dacor being bought out by Samsung 2 years ago and COVID related delays. He also told me there is no ETA on those parts and said it could be an unknown amount of months. So now I dont have an oven for an unknown amount of time. This is unacceptable. I was sharing my frustrations with a friend who recommended I post this on Dacor Applicances Facebook page. He thought I would get an immediate helpful response. So I did. It was taken down not more than 3 minutes after it was posted! They never even reached out. Pretty poor company service. I will never buy Dacor anything again. Even when the oven was working ok - it never kept good heat and the self-clean cycle never cleaned well - there was lots of grease residue left behind. This is a poor quality company all around. Believe the negative reviews. If I could give negative stars, I would.

In September 2009 we did a complete remodel of our kitchen. Replaced everything but the refrigerator, with DACOR appliances. Within a few months we had problems with the dishwasher and finally replaced it with a GE in 2012. About that same time we had problems with the Dacor Epicure 30 Single Oven Model EO130SCH control panel and had to have the repairman out to work on the relay/computer board. At Christmas 2015 I had trouble baking, the temperature wasnt accurate and have had the repairman again. He says that the computer board is fried (his term). Ive tried calling Customer Service with no success. Ive e-mailed them with same results. The appliance repairman has told me that he cant find the part. All the distributors that hes called have been told that the part is on back order. Ive been without an oven for over two months now with no fix in sight. Have been told that IF we find the part it will probably run around $500.00. These are appliances that are only six years old and have had gentle use by senior citizens. Anyone reading this - PLEASE DONT BUY DACOR! Youll be sorry as I am.

I purchased a Dacor range/oven combination in 2005 for a total kitchen remodel. I chose Dacor for its name and reputation for quality. The first problem was that the digital clock was running very fast; that occurred in October 2005 and was covered by the warranty. The next problem was that the downdraft would not stop going up and down. I had to turn off the breaker switch of that function until the repairman could fix it. The next problem I consider as a design flaw and not an oven malfunction. Both oven lights were burned out by June 2010 and needed replacing. The light bulb cover for my model is behind a grid for the oven racks which must be removed before the light can be accessed. It’s not a 5-minute job. The next problem was in September 2010 when the oven broiler refused to work. Another service call was needed to replace the oven broiler ignitor. The next problem was in June 2011, when the oven rack, which slides into cavities built into the rear wall of the oven, refused to release. It required another repair call. The repairman had to pull the oven out away from the wall and work to release the rack. As a result, I do not use that rack. Theres no one who uses the oven besides me; I have no kids in the house. The oven has never been misused or abused. The next problem was in November 2012, when the self cleaning feature refused to work; another repair call was needed. All of the above cost me $1,250. When I contacted Dacor about the myriad of problems/issues, I got a written reply that said every situation is reviewed on a case by case basis; in most out of warranty cases, Dacor would sell me the part I needed at a reduced price. I responded that would necessitate two service calls (one to diagnose, one to fix) and an inoperable oven for however long it would take to get the part and then reschedule the repairman. In almost all of the above, my repairman (Dacor authorized repairman) had the parts on his truck. I cant be waiting weeks without a functioning oven. Based on all of the above, my oven would have been out of order for many weeks. I wrote Dacor again, thinking the CEO needs to know about all these problems. I asked my contact to forward my correspondence to the CEO for review/comment. Instead, I got a reply from the customer service supervisor who stated in part on his 1/3/13 email, There tends to be a disproportionate amount of negative postings on-line”. Really? Most companies pay attention to complaints or compliments about their product or service. If someone takes the time to communicate, then the company owes its shareholders the duty to listen when there are repeated complaints about their product. Will I buy Dacor again? Never.

Ive had the pleasure of owning a PGR30S range from Dacor for the past 20 years now, I must say it has past all my expectations on performing in the kitchen. This unit cooks everything amazingly well... Thank you Dacor for such a great range.

We did a total kitchen remodel and purchased Dacor appliances. Big mistake. Had to spend 500 on refrigerator repair (model EF36BNDFSS). Oven is off 25 degrees on temperature. The glass top for burners was defective. Would never purchase Dacor. Microwave front trim keeps coming off as well.

Previously, I submitted a complaint here and I would now like to amend it. The problem(s) that I experienced with my 8 years old Dacor 30-inch wall oven was what I described in my earlier post (July 9, 2012). But after posting here, I was contacted by a Dacor representative not once, but several follow-ups to ensure that the problem was resolved to my satisfaction. It was and Im now very impressed with Dacors customer support. To be fair, I should have contacted Dacor with my problem before blasting their product here.It has been a good oven for 8 years and given their support that Ive recently experienced, Id be more inclined to purchase Dacor products in the future as it appears theyre willing to stand behind what they sell. Im really glad this issue was resolved because I was about to throw in the towel and buy something else, but couldnt find anything else that looked near as good as my Dacor and had glowing product performance reviews.

Updated on 11/29/2018: Further to my recent review of my Dacor wall oven, I went to a high-end appliance store yesterday to research replacements for my microwave, oven, warming drawer installation (so, yay, I get to spend $13,000-plus to replace items I have had for only eight years). I cannot verify the accuracy of this, but the salesman explained the problem. For a period of time, Dacor and Viking used the same third-party supplier for their relay boards. Unbeknownst to the companies, the supplier substituted a part that was later discovered to be defective. Unfortunately, all replacement relay boards contain this part, so the problem will recur repeatedly, as many on this site have discovered.As bad as the cost of periodically replacing the board is, the unreliability of the oven is worse. As happened last time, mine works OK sometimes, burns everything other times, and struggles to get to the desired temperature other times. And because the behaviour is unpredictable, it cannot be reliably recreated when a repairman visits. I have had one email from Dacor and I responded with the information requested, then nothing. I suspect that they know they cannot fix the issue in a permanent way, so theyre just hoping all of us with this defective part will just go away. It looks like newer models that look like mine are still available, but I refuse to pay $5,000 on the off-chance that it has a better relay board. I am looking at Miele replacements.Original Review: I have had two Dacor wall oven, microwave, warming drawer installations. The first one was only a couple of years old when we moved, and Id had to replace the microwave, but I put it down to a power surge in the house after an outage. I have now had the same set in my new house since 2010. I have had to replace the microwave again, but not because of a power surge. It just stopped working. The oven has been a complete nightmare. The probe broke and although I had it repaired, it never worked properly, but the worse problem is that I am about to have to replace the electronic board for the SECOND TIME. When the problem occurs, the oven heats up to the setting but the element just stays on. I all but ruined an expensive cut of meat on the weekend – with company coming, no less – and just had to throw out a batch of muffins. I am considering tearing out the whole installation and getting another brand that doesnt destroy my food. It would probably be cheaper than having to fix the oven every year or two and replace the microwave periodically. These appliances are garbage.

In August of 2005, I purchased a Dacor pro range. In December 2005, the control panel began to blink and lose display. Dacor gave me names of 2 authorized repair people. After several visits by a repairman, I phoned Dacor and was told to call a repairman. They obviously didnt listen to me! The repairman spoke with Dacor representative who responded that the display needed to be ‘rebooted just like a computer.’ Several times a month, I must go to the electric control panel in my basement to turn the breaker switch off and on in an effort to ‘reboot’. In September 2010, the display panel went dark and could not be ‘rebooted’. I had to replace to control the membrane at a cost of $530.69 plus $169 for labor and a service call. On Thanksgiving 2010, the ‘new’ display panel which was obviously defective, stopped working. Once again, a new membrane had to be ordered and installed incurring another service and labor charge! I sent a letter to Dacor wanting reimbursement of labor/service on original defective membrane and was advised that they warranty their products, not the service! It is now November 16, 2011 and I still must continuously ‘reboot’ the control panel! However, I spoke to an authorized Dacor repairman who told me that Dacor has had many complaints such as mine and now have a devise which attaches to the power cord and filters out the ‘noise’ from other household items which disrupts the control panel on my oven! Is there a reason why Dacor is keeping this a secret? Do they not want to make their consumers happy? I cant wait to be rid off this appliance and all association with the Dacor company!

We purchased a Dacor wall oven when we renovated our kitchen in 2010. After five service calls, a replaced circuit board and broiler element, they found a broken wire which must have happened during clean cycle. I have been without an oven for two months and would not recommend buying a Dacor oven because I think it has a faulty design. The issue is still ongoing.

I called the customer service number regarding my double oven. It just randomly beeps and now turns off. No error code displayed. It has done this on and off since 2003. Now it is happening all the time. I called customer service and they seemed to act like it is my fault and I need a new touch pad. I inquired and this is a recurring problem with this model. I could not get a straight answer from the person I was talking to. He just told me that if the repairman says I need a new touch pad, then I need to get one. Well I have been doing some research and this is a problem that seems to be haunting more people than I. We own a Dacor gas cooktop that has had to have a switch repaired. We own a microwave that has had two new circuit boards and now a beeping oven that gives no error code and turns off by itself. My advice, do not buy Dacor appliances.

Dangerous condition! I purchased a Dacor 36 dual fuel range 5 years ago. I reported the issue to Dacor via email with no response from customer service. I believe the no response was an attempt by Dacor to distance themselves from their responsibility for this potentially dangerous condition. Specifics: When pre-heating the oven in convection/bake mode, if the oven door is opened before reaching the set pre-heat temperature, a ball of flame will explode up from the opened door. The ball of flame is basketball sized and has singed eyebrows and hair on several occasions. To reiterate - it is a ball of flame, not super-heated air that is the problem. As a result, after non-response from Dacor, we called a decor qualified repair technician who diagnosed the problem as a bad igniter. The igniter was replaced and the problem still exists. I fear that a small child may be severely burned by the engineering design fault.

I bought a 30 Dacor Double Oven (EO230SCH), 36 cooktop, warming drawer and matching convection microwave. Well over $10k. The microwave has been replaced as it died early within the first year while cooking popcorn - nearly started a fire in the kitchen... However the cooktop igniter died at 4 years and now the wall oven is on its third control board in years 3, 4 and 5. Nothing is under warranty and they want nothing to do with me now. The replacement oven controls cost ~$400 each plus installation. So after all this expense, I have invested $1,200 more in replacement parts and the cooktop needs an aim & flame to light. Total crap. Im going to replace all of this and will never go back to Dacor. I took the time to write this so that others will not waste their time with what I have to assume is the worst quality in the industry. Please dont waste your money.

I have owned a Dacor Convection microwave for a few years and is so far the best Ive ever owned. It works great every time, has great preset features and also has a great stainless steel look. Great Product.

My Dacor Preference 30 double wall oven (model PCD227R) was installed on 5-14-2004. On 12-31-2007, I replaced the upper oven high limit switch for cost $146.56. On 5-19-2010, I reset the lower oven high limit switch for cost $95.00. On 8-27-11, I replaced main control panel (Bezel Assembly), whose parts cost $271.10. On 12-14-2011, I replaced the main relay board for $214.02. On 1-16-2012, I replaced main relay board again, and it is under warranty. On 2-3-12, I replaced upper oven temperature sensor for $32.09. I am awaiting authorized Dacor service technician to calibrate both ovens.

I purchased all Dacor products. First Dishwasher went out, had purchased warranty. Came out 6 times to fix it, filed complaint with Better Business Bureau. Finally got dishwasher replaced with a Kitchen Aid. Thank God for the BBB. They help people. Then my stand alone range with 6 burners had one of the burners go bad, the appliance co. fixed it. Then the oven relay board went defective. Had to order part over $400.00, no warranty. Then wall oven Relay Board went out, 2016. Paid over $460.00.Less than 12 months later relay board went out again. They said Sorry, no warranty. Ordered part said it was $500.00 + to replace. The appliance repair tech ordered wrong relay board. They called me today and now said its going to cost $650.00, no warranty. Do not buy Decor products. They are horrible. I feel I am being ripped off by Dacor and feeling untrusting of the Appliance Co. I may need to file another complaint with Better Business Bureau. Buyers beware!

After 4 months our microwave exploded when we tried to bake 2 potatoes. Dacor has reviewed the situation and acknowledged the product was defective. 10 weeks later they keep saying the replacement is on the way but no one knows where it is. Dont buy dacor products.

My Dacor oven (DO130S, S/N V-A-10160044) is less than 18 months old. While it was in use, it popped, sparked, tripped the circuit breaker, and died. I called customer service, and voiced my concern on safety due to potential electrical defect. Steven, the customer service person advised me that this oven is no longer in warranty, and to call a repair service. I reiterated the concern for product safety. He placed me on hold, and the call was dropped. I called again, and Mike answered. I repeated the same info, and he was not willing to listen to any concerns. He hung up on me. This experience does reflect on published Dacors commitment to customer service, or product safety.

Our 30in Dacor double ovens are approximately 12 years old. I feel they operate adequately. However, not better than our much lower end appliances we previously owned. My main complaint is the self cleaning function. My old ovens self cleaning worked much better! With our Dacor ovens one must take out the racks and clean them by hand. This is very difficult and time consuming. I used the 3 hr option to clean my oven that was moderately dirty, mainly from cooking a prime rib over the holidays. After the 3 hr cleaning the oven was still very dirty with splatters and grease. Im now cleaning my oven again with a second 3 hr cleaning cycle. I know at the end of this second cycle I will need to do a lot more cleaning by hand! I hope Dacor has improved their inadequate self cleaning feature. If it hasnt been improved, I really cant recommend Dacor ovens.

Warning: Warning, safety hazzard for all, adults and children. Recommendation: The knobs should be set on the top of the stove, not the front where children can reach. Control knobs should click when fire and gas is turned off, and highest flame setting should be at the end of the turn just like a clock. I inherited this range as new owner of the house. Today I used the high flame option of the gas stove. When I was done with cooking, I turned off the gas according to the knob position, front of the turn. Later I discovered the range was not exactly off. It was still hot but no flame could be seen.I checked by sight the control knob position, it was set incorrectly in off. Then I touched it and realized the knob actually has a bit more to go to the end, slightly before the off position. Therefore it continues to release gas with unobservable flame. This knob does not click when user turns it to the off position. It is just a silent knob with an inaccurate cue of a heavier black line for off and on indication. Besides, high flame setting comes at the beginning of the turn of the knob rather than the end, it is counter intuitive to our mind of increase heat by turning the knob further on, like our clock. Oven racks are hard to put back after cleaning. Once a rack almost tumble out while food was sitting on it.

I own a complete Dacor Kitchen, with many appliances. They are the highlights of my Home. Great features: fast induction cooktop with an efficient silent hood, versatile refrigerator, reliable oven, and of course the always dependable dishwasher. This is My Dacor Kitchen!

We bought our new Dacor CPS 130S wall oven when we built a new house in 04. First we had to replace the lower heating element. Now the touchpad (Dacor part # 13290S) is malfunctioning. The + button will not respond to touch. Called Dacor and was told that the needed part number was discontinued in 2009. I double-checked with a distribution center in San Antonio, TX, who confirmed that the part is no longer available. They referred me back to Dacor on the chance that Dacor would have one somewhere. Dacors suggested solution was that we need to buy an updated completely new oven, which would cost us several more thousand dollars. So here we sit with a perfectly good oven minus a touchpad to control it correctly. So much for buying reliable, U.S. made products and receiving good service. I thought there existed a federal law that mandates a company must make parts available for 10 years if they discontinue the product?

When the beverage center was initially installed 5 or so years ago, I went to put wine bottles in the wine drawers and surprisingly, the shelves are too shallow to properly hold some of the bottles especially tall Riesling bottles. I contacted Dacor to get some response to the poor design and got no response. Now the unit wont chill and I have just paid a repairman $162 to tell me it is not repairable because the unit has a leak in the refrigeration system and it is within a foamed in area of the system. So after only 5 years, I am replacing my wine fridge, not what I would have expected from a brand that touts itself as being high end. I am very dissatisfied with Dacor and certainly will not be purchasing anything of that brand again.

Warning! Do not buy Dacor appliances! We have had our appliances for three years now and all of them have had something wrong with them. Oven circuit panel went and had to be replaced! Dishwasher arm and seal broke and dishwasher leaks! Refrigerator freezer compressor went! Hood range switch broke and had to be replaced! Dacor is the worst appliances I have ever bought! Buyer beware!

ZERO STARS if I could but DISAPPOINTED - if I had to use one word to describe our experience with Dacor with not only our $8K+ 42 Built In Refrigerator that is sitting at 70+ degrees in the freezer and fridge sections but SO DISAPPOINTED with their poor customer service and lack of concern resolution tools for their team to even try to help.They are supposed to have high end luxury products. With that, anyone would expect to have a luxury customer experience. However, our family has been WITHOUT a working unit since January 6th. That is less than a month from when we had it installed but almost a month from today. We followed the proper protocols to get it repaired. Took almost two weeks to even get a technician. Once we did, he confirmed it needed to be replaced. We got approval and now learned we have wait another 2-3 weeks to get a separate decision to be made.Requested if there is any way to escalate our concerns but cant even talk to a supervisor for another 24-48 hours... Apparently they will call when it is convenient to them. Dacor - have some empathy for your customers! Imagine paying for a high end product to have no working fridge or freezer for a family of 6. Not sure how this is an acceptable practice. POOR QUALITY, UNTRUSTWORTHY, DOES NOT CARE ABOUT THEIR CUSTOMERS.

I am thrilled with this stove. I have always had a vertical double oven so this is a first for me. Really pretty in my kitchen. Almost like a piece of furniture. Can’t wait to start cooking!!

We just purchased our home in March of this year. The previous homeowner purchased a Dacor oven; it is electric & propane. She purchased the appliance after a complete home renovation in 2008. They lived in the home. After 1 year, they moved out and had it on the market. We purchased the home in 2012. As soon as we moved in, we noticed the oven was not working. We called an appliance repairman - $564.00 service call and part for a new relay switch. It was great; the oven worked. Not even a day later, an F1 error. We called them back out thinking they must have done something incorrectly. They then said we needed a new control panel. We did not have an additional $400.00. We just moved, so he said you could still use the oven. We did. We would use it and flip the breaker off so we did not have to hear the annoying beeping sound. Then I came home and bam - no display, no oven. We called a different Dacor certified appliance guy thinking the first company was just taking us for a ride and it was their fault. $572.00 later, we got a new control panel, but guess what, the technician did not even make it to his truck before beep, beep, F1. He came back in and then said we needed to replace the display screen - an additional $217.00 with no labor charge. We told the man to shove it. I had every plan of taking the oven to our back tank and using it for target practice. But in good business practice, since this company already invested $572.00, we could not ask them to eat the money, so we allowed a third fix of the oven. While the technician was here, the oven made a horrible loud sound and shot out flames. He insisted maybe it was due to it sitting for a week without use. He left. I never noticed this flame before when the oven worked despite the F1 beeping. Now it’s hit and miss. Some days it will shoot out a flame once until it reaches 200+ degrees and then you can hear the fan kick in. Some days, twice, I have had it happen 3 times. If my children were to open the door during this event, I am sure they would be seriously burned. At first I was thinking maybe it is normal for this oven to shoot out flames during preheat mode since after $1300.00 repairs maybe it is just not functioning correctly. But if it were a normal function of the product, to me it would do it every time consistently and not three times, or two times on some occasions. I hate to admit this but I am almost fearful of using my oven. I currently have a pie to put in for dinner and I’m thinking its 3:09 pm; I could set the oven to preheat while I run to get my kids from school so if it decides to blow up, I am not home and that is pretty sad. The last repairman we had come out said in his personal opinion, he wouldn’t have repaired the oven, because they are known for issues, and he would have gone to Lowes and spent $300.00 on any off brand stove first. We have considered that, but this stove is extra-wide and the cabinetry is built around it. So for us to purchase an oven to slide right back in it would be another $1300.00-$2000.00. We have issues with the burners not always wanting to light. I almost caught on fire lighting one because it shot out flames when it decided to finally ignite. Sometimes it just clicks. Currently, I am down to two burners when just two days ago all six were working just fine. Over Thanksgiving, it took no kidding 1-hour to cook brown and serve rolls because the oven did not reach the set temperature. We stuck my husband’s bbq thermometer to see. It was 256 degrees, not the desired 350 degrees. Does this stove have warranty? We have no clue as the previous homeowner purchased the stove. She claims to have spent $5,000.00 on this stove or more during their purchase. We do not have warranty on our home so for each repair, it is out of pocket for us, and currently we really are thinking any knock off brand at Lowes would be a better product than a Dacor oven and less of a safety hazard for our family.

Purchased a Dacor DT0227B wall oven. The first oven arrived damaged; the control panel was completely off the unit. We ordered a replacement oven which arrived today. Upon turning on the power, error codes C76 and C77 appeared on the control panel display. The installers phoned your service people who instructed them to remove the front panel and look for a loose wire. When they removed the front panel, the entire control board was just hanging free, not secured in place with any screws (it appeared that this was an assembly error). They found a wire hanging, secured it in place, reattached the control panel and applied power. At this time the error codes were no longer displayed and they were able to set the time. When they attempted to start up an oven cycle to test the unit, the Start/Continue button on the membrane keypad was not responding. Another call to your service team determined that the control panel would need to be replaced. 2 ovens within 2 weeks arrived DEAD! The quality is beyond unacceptable. I sent an e-mail to the CEO of the company before I posted this. I received a response from a QA guy. Any manufacturing company that thinks Quality is the responsibility of QA is working with a 1950s mindset!! Dacor is pitiful and will certainly not last as a company with this kind of quality and customer service!!

We moved into our home in 2012 and have had nothing but problems with our Dacor refrigerator (Dacor Model EF48DCBSS). Our issue is the drain pan heater AGAIN. This problem is, water that collects in the drain pan freezes and eventually builds up to a point where the fan motor starts hitting it, sounding like a helicopter landing in your kitchen! Weve had this problem repaired THREE times by TWO DIFFERENT repair companies to the tune of $1000. Both repair technicians said it was a design flaw and this problem would continue to happen regardless of how many icing kits were replaced. So a $7000 refrigerator will cost us $1000 a year to keep running?!?!?! After much research, its apparent we are not alone with this problem. We also had a Dacor microwave just STOP working (model #DMT2420S). It was only 8 years old. Our Dacor oven range (model #ER48DSCH) has two ovens and only one side retains the heat. The main side gets to about 300 degrees and then the temperature starts dropping. Here is the breakdown of costs for our so called high end appliances. Dual Fuel Range - $10000, refrigerator - $7000 (annual repairs of $1000), microwave - $500 (had to purchase new microwave $600). PLEASE LEARN FROM OUR MISTAKE AND DO NOT PURCHASE DACOR APPLIANCES. We have a refrigerator/freezer that we bought from Sears SIXTEEN years ago for $500. Still works like a charm! And thank God we have it, because it has had to be our backup for our $7000 Dacor.

This is the second time I have purchased these appliances and unfortunately each one has been a great disappointment. I have spent enough in repair bills to almost purchase a warming drawer. Each one shuts down when the self clean button is turned on, and then I have to call a repairman out to recalibrate the oven to work each time I try to use the self clean. I was told by the last repairman that the life of the oven is greatly shortened if you the self clean mode. If this is the case, either fix it or take out this mode. After I had the oven about a year the oven door glass blew out, and this had to be replaced. The temperature in the oven is very unreliable in different areas of the oven and browns more on one side than the other... For the high end cost of these ovens, I would just as soon have a basic oven that works and does not go out every few months. What a waste of money I consider Dacor to be, and will never recommend it to anyone I know. I am in the personal shopping business and have my own company, but will tell my clients to be very aware of the high cost/low performance of Dacor products... On a scale of 1 to 10, Dacor gets a 1.

I purchased my Dacor range in 07. After running the self clean cycle today, my oven wont heat up using convection or regular bake. Keep in mind, I had the entire electronic guts of the oven replaced in March 2011, 6 months ago after the same full failure. I paid $6,500 for this appliance. I wish I had my old GE oven back. This piece of equipment is only 4 years old. My husband and I dont use the oven often. What a huge disappointment! I will likely spend the next few days on the phone with customer service.

48 in. Range - Wish I had read reviews first would NEVER have purchased Dacor. Paid almost 11,000.00 for a range so many issues they replaced it. New range came with 7 defects. It has been over a month and nothing has been done about it. Everyone keeps passing the buck and I am sitting with an high end expensive product and no help from Dacor. I am being very patient but also very frustrated at this point.

I recently complained about my Dacor dishwasher that would stop running during the cycle because of a faulty circuit board and touch pad. The repair would have cost me $500.00 to replace the entire touch pad and circuit board and the Customer Service department was not in the least helpful or concerned. After making the complaint on this site, I received an email the next day from James who was very nice and asked for the model, serial number of my dishwasher and who was the repair company I used. I emailed the information back to him and after verifying my information, he informed me that the parts would be shipped to my house at no cost and I would only have to pay for the service call! Now that was great service from a company who is trying to make good for a bad item in their appliance line. My repair person told me that Dacor is now using a different manufacturer for their dishwasher so hopefully it will be a better product.

We bought a new house a couple years ago, and the kitchen came with a suite of new Dacor appliances - range, fridge, and dishwasher. They are all terrible.The led indicator on the dishwasher is scrambled. The icemaker in the fridge clogs up into a solid block of ice. We had this fixed, which involved a new control board and some caulking, but the problem returned not long after. The knobs on the range feel like theyll snap off any time. The lights in the oven arent seated properly and they interfere with the oven racks. It takes forever to get up to temperature. And Im starting to think I have a gas leak. How can these products be so expensive and such utter garbage? Oh, but they have wifi!

We moved into our home in July 2012 and have had nothing but problems from our Dacor refrigerator which was manufactured and installed in this home in 2007. The appliance repair company has been to our home approximately five times in the five weeks since we moved in. Initially, the problem was with a leak in the cooling system which took the technicians about 16 hours over three visits and $1,400 to sort out. Currently, we have been without a visit from the techs in two weeks (our longest stretch since moving in) and the refrigerator is leaking from the ice dispenser and making a motorized noise so loud. Initially, I thought a motorcycle had pulled into my kitchen. Needless to say, the technicians are on their way back.

This fridge is great. We visit warehouse stores for groceries and everything fits perfectly. The shelves can move for tall items or more bulky ones. The freezer is large and can fit so many different items. My 2 other favorite things are the fresh drawer and auto refill water pitcher. The fresh drawer temp can be adjusted and can fit anything from wine to a cake to cheeses and meats. And an auto fill pitcher keeps the water super cold and you never have to worry about someone forgetting to fill it back up.

I moved into a house that already had a Dacor unit in place. Within months, I discovered that I owned an oven that could be fixed by throwing the circuit breaker. Then, I learned about invisible hands that turned the 325 degree convection oven to a 500 degree broiler. The final act was having all three glass panes shatter and the control panel cracking as punishment for assuming that the oven cleaner on an expensive gourmet stove would function according to manufacturing standards. The repairman ordered replacement parts. He spoke with someone who was off shore so forget about Dacor being all American made. The wrong parts were sent. He has reordered. Meanwhile, I have been without an oven for two months. If this goes on, I am going to Home Depot and buying a Hotpoint or GE. It is the same price as replacement glass panels and the control panel.

We did a full reno on our house starting in 2018. With a brand new kitchen we felt higher end appliances would help finish it off nicely. We settled on Dacor from our appliance dealer due to the look a past history of great reviews. Had we known that the original Dacor no longer existed and it was now Samsung with Dacor nameplate we never would have bought them. We have had 15+ service calls for the fridge and oven. Oven didnt work from day one and required multiple board changes. The interior is not level so you cant bake a cake and the racks are impossible to remove without bending the rails. It just failed again last night just as the warranty expired. The call center is in the Caribbean so dont expect any help from customer service. The ice maker with the fridge is a continual problem so we had to buy an $100 ice maker that now sits on our counter full time. These appliances have a high end price tag but are not high end!

For the second time in 7 years our Dacor ERD 48 Range has failed us. Just in time for our New Years Day dinner. Neither of the two ovens will heat. We are now encountering the exact same problem. We spent $1000 the first time replacing the board. We cannot afford to do it twice.

We moved into our newly built home in April 2012. I purchased the Dacor 30" microwave drawer to complement a 30" electric oven that is installed just above the microwave. I am very happy with my purchase, it is stylish and works well. The drawer is spacious, I can fit multiple food items in it and they all cook evenly. We use it daily and couldn't be happier with it. If I ever move, I will purchase this microwave drawer again.

When I bought my house, the previous owners told me that theyd been having problems with the Dacor oven. They had purchased a replacement burner and prepaid the Dacor authorized service technician to install it for us. We have worked for three years now to get Dacors authorized service representative to install the part for which he has already been paid, and have been using a toaster oven to prepare meals for a family of four the entire time. The oven will heat to 135 degrees, then either shut off completely or immediately switch to broiling mode and burn whatever is inside it. When I called Dacor to see if they could help with the service issue since the technician was authorized by them, they told me it was my problem, not theirs. Although if the product they manufactured wasnt faulty in the first place, it wouldnt be anyones problem!

When my husband and I built our home 11 years ago, I splurged and got a Dacor ERD36 36 dual fuel range. During the process of our build, our builder dropped my range during the installation. Dacor was very quick to send out a servicer to make sure the performance of the range was not compromised. The only thing that needed to be replaced was a bent bullnose in the front and the kickplate. I have had one service call in 11 years, which was last year after a brownout in my neighborhood caused my clock and oven setting to go crazy. It had nothing to do with function and had nothing to do with shoddy manufacturing. I just got it fixed and continue to use my range every day. I am looking to expand my island because I need another oven and I am very excited to add a Dacor oven to my home with zero hesitation. I am looking at a DO130S. I would buy Dacor over and over again!

We purchased this range after remodeling our kitchen. We opted for the Dacor because of the deep oven that the other high end ovens did not have. I am an avid baker so this was a plus. After a year and half the oven stopped working, it was not getting hot. Thankfully is was still under warranty and it was repaired. The technician determined it was the oven control thermostat that was not working. Fast forward two years and again the same problem, along with the right front burner now also not working. And wouldnt you know it, the warranty is expired. Another technician came out again and stated to fixed the two problems it would be approx $250.00 just for labor and not including parts. CRAZY INSANE!!! If we would have known all the problems and we would have purchased either a Wolf, a Thermador or even a Monogram. How can so many issues and problems be happening with an range that is only 4 years old? Especially one that costs over $6000. It has to be a lemon or poorly manufactured. Ive contacted Dacor and was told they need to review my file to make a determination on what they want to do. REALLY, you dont need to be a rocket scientist to know there is a problem. Theres lemon laws for cars, why not appliances????

I bought this beautiful range and choose Dacor but when we used the Green Clean on it the enamel pealed off a spot on the bottom of the oven a 2x4 inch patch. Now Dacor say that this is cosmetic and will not honor their warranty. I have been calling them daily because they do not call me. Their service sucks.

I purchased a Dacor Renaissance range for our new home. What a waste of money. Though I have not had any major problems with the performance of the range yet, besides uneven baking, the design is not user-friendly. To begin with, the gas burners share a grate. So when cleaning, you have to remove the whole grate on one side. The controls for the burners & griddle are very hard to see & I have to bend over to see which burner Im turning on. The oven racks are a joke. The two glide racks are very bulky with sharp edges. It is difficult to change the heights or to remove them for cleaning purposes. Though there are three racks included, it is impossible to bake with all three in the oven.I have a GE Monogram that I had purchased two years ago for another home, and I love it The Renaissance & Monogram are similar in price, but I unfortunately, listened to the sales person & let them talk me into the Renaissance. I realized my mistake in buying a Dacor immediately & contacted the appliance store. Even though the Renaissance had not been used, they would only give me a token amount of money towards trading it in for a Monogram. So, I am stuck with a range that causes me to swear under my breath every time I use it. Dacor could learn a lot from GE.