Very pleased with my Whirlpool dishwasher. It is not the top of the line but does a great job of cleaning my dishes and is very quiet when running. Whirlpool appliances have been very good to me.

We purchase the Whirlpool Gold Dishwasher GU2400XTPB7 with our new home. This dishwasher has a plastic tub. For some unknown reason the dishwasher started to leak, I checked every hose connection and could not find the leak until I noticed four small burn marks in the plastic tub underneath the heating element. It actually looks like someone took a cigarette to the plastic. One of the burns went through the plastic tub, and this is where the leak is. Note: at no time did any of our dishes touch the heating element.I called Whirlpool customer service and they said they would send a technician out for $81 and in addition I would be charged $19 for every 15 minutes of service. I had asked to speak to a supervisor and he recommended that a technician come to my house at my expense and all the supervisor could say was that he was sorry, which became even more frustrating. No remuneration was offered. I have had other issues with our Whirlpool washing machine (holes in clothes), gas range stove (ignitron issues), and fridge. l will never purchase any Whirlpool product again including Jenn-Air. I made this quite clear to the supervisor. Whirlpools products and customer service are inferior based on my experience with our four appliances. It would be great if they actually practiced what their mission statement suggests, because as a customer I truly feel defeated.

We recently bought a Whirlpool front loader even though the reviews kept mentioning mold and odors. I discovered that there was a water buildup in the soap dispenser so after every load, I remove, clean and dry the soap dispenser. The machine does a great job on cleaning clothes and I am following other suggestions on cleaning the drum from time to time. By the way, I bought my machine at Lowes from the scratch and dent department and with a little negotiating, I paid half price! Good deal and so far, good machine. Good luck and remember to remove and empty the water from the soap dispenser!

We had purchased a Whirlpool Duet Sport Washer and Dryer in 2007. Since that time we have had several repairs on the dryer, resulting in us having to purchase an entire new unit in 2011 (4 years old), along with mold that has accumulated in the washing machine on the tub and rubber seal that cannot be removed after several attempts utilizing several products that were recommended. The end result is our laundry that has been washed - comes out with a musty odor. Not happy at all with the top of the line, best possible machine to produce clean laundry as was sold to us! This has been a nightmare, and a totally dysfunctional appliance that should have lasted longer than 5 years!

RE: Our Whirlpool gas range/oven model# GW397LXUS05 installed Oct 2010 started acting up when setting the oven temperature. The 0 doesnt work so we input 355 instead of 350 etc... Other numbers have started to fail as well... Also it needs cleaning but a neighbor with the same model said whatever you do dont use the self clean for the oven, as they did & it literally burnt out the control panel costing them over $400!! Say what?? So we cant use the self-clean feature or well really fry the control board... Would LOVE to hear Whirlpools explanation on this one... And a minor issue but nonetheless worthy of a mention, the oven drawer never slides in/out properly & hasnt fit right from day one...

My ref. stopped working. I troubleshoot it and did not work. I filled out a service request back on February 2nd, 2015. I got an email back from a subcontractor called Active Appliance INC. with a date service on February 6th, 2015, 4 days after my service request, and that is the only available date. The technician arrived while I am not at the house, however I talked to him before he started the work on my refrigerator and asked him kindly if he can call me after founding the issue, and he assured me that he will. No call and when I arrived home I found that he told the attendant that the refrigerator is not working and he has to report to the office. REALLY! We know that! Anyway I called Active Appliance and the customer services rep. told me that she could not answer with the diagnose until she speak with the technician and that will be Monday February 9th, I asked if I could speak with a manager, and her reply was Our managers do not talk to the customers. I had to hang up and call Whirlpool customer services and spoke with a nice gentleman, that he was not happy with Active Appliance INC. services. He placed me on hold and called them and within 3 minute he got back with the news, what was wrong with the refrigerator, electric computer panel burned out and then the fan continue to work with no stop, so it burned as well. He assured me that the services will be done no later than Tuesday February, 10th.While on the phone I got a call from active appliance and this time she wanted to know if I am warranted. I told her that I have Whirlpool on the other line and they assured me that I am. She said that it does not matter and she has to get something in writing. I placed her on hold and talked with Whirlpool and he assured me that he will contact them and email me a confirmation, which he did. By Tuesday February 10th, no call no follow up. I called Active appliance and they stated that it would take up to 14 working days for a part to arrive. I called Whirlpool and spoke with a customer services manager, and she got on the phone and told me that they are going to do their best and get back with me. Today February 16th I got a call to cancel a work service order due to technician calling sick and reschedule for February 25th Wednesday, I told her that they did not call to schedule the service first place, her answer was Never mind, I am calling to cancel anyway. Would you like to take this appointment or NOT? I asked her kindly to reevaluate their service procedures and the way they handle their customer, and I told her that I bought my refrigerator from Whirlpool and they are the company in charge of their product and I do not wish to continue this dialog with Active Appliance!I called Whirlpool and the customer service gentleman was helping me and we got disconnected, however when I called back they were closed for the day, however the customer service has my phone number but I got no phone call!!!! I think this is the worst POOR service I got within the last 20 years!!!!! I hope someone at Whirlpool care about their services and can contact me to handle the issue.

I have purchased 2 Whirlpool washers in the past 6 years. Both have been a huge disappointment in quality and dependability. The 2nd washer I bought May 8, 2015 had problems from the initial purchase. In just a little over 2 years I have had to replace the suspension rods, and now the transmission is broken. Both washers had transmission problems. I have bought my last Whirlpool products. I recommend persons considering buying a Whirlpool product check the reviews before you purchase! I cannot believe this company continues to survive.

The dishwasher racks in Whirlpool/Amana/Kitchen Aid/Maytag dishwashers do not last as long as the dishwasher does. The vinyl coating on the cheap metal tines wears off causing the metal underneath to corrode and rust. This rust will deposit on your flatware, stainless or otherwise. When the vinyl coating wears away at the base of the tines, the tines will break off, creating more opportunity for rust to deposit onto flatware. You can purchase new tips for the end of the tines, and more vinyl to paint onto the tines, but you cannot replace the tines themselves or paint the vinyl onto any rusty surfaces.Another option would be to buy a new rack. A new bottom rack costs almost half of what a new dishwasher costs and if you need both top and bottom racks, you will pay almost $400 for the pair. Whirlpool was not amenable to negotiating a better price on the racks, but they would sell me a new model at a price that was close to what it would cost to replace both racks! Now does that make sense? Does it make sense for appliance companies to cause consumers to have to throw out an entire appliance rather than fix it? No, and it is creating more waste and filling more landfills. My dishwasher has run great for 7 years and I refuse to buy into the rack racket! No more Whirlpool for me!

I was having trouble with our Whirlpool water heater and thought that wed have to shell out and buy a whole new one. Chris saw my complaint and helped me find the right replacement kit at a minimal cost, as my unit was out of warranty. He even took the extra step and overnighted the parts for us at no extra cost. I was extremely impressed with Chris professionalism and customer support skills.

I purchased the front load washer 4 years ago and the board went bad in 2 years. It costs more to fix it than the washer is worth. Stupidly, I purchased the top loading Cabrio and it has gone downhill from there. Has always sounded like a jet taking off in the spin cycle. Then 18 months into the purchase, it started with grinding noises and load balance issues on the spin cycle. Seems like they have a lot of issues with these Cabrios. Spent a lot of money for nothing. I will never buy a Whirlpool again!!!

I bought the most deluxe and expensive washer and dryer I have ever owned. It is a Whirlpool Cabrio. The clothes come out of the washer dry, and all tangled up. I bought it new from Sears on July 2009. Now only two years old, and the washer sounds like a jet plane. I paid a repairman $90.00 only to be told this is common in this machine. The repair is expensive, and I would be better off buying a new one! I owned a cheap, little GE washer, which cost me $300; ten years, and never had a problem. Now my dream machine turned out to be a piece of crap. I will never buy a Whirlpool again!

Water heater was defective from the factory with a pinched wire between the thermostats. After replacing everything on the heater Whirlpool would not reimburse any parts or labor for the unit... Whirlpool is dead to me now, and forever and I love to tell my story to prospective buyers of their products!!! So far, to date I have cost them about 14 sales of major appliances (and still counting!!!). After reading some reviews… Im (sorry, I omitted the personal insults) in respect of your review guidelines.

I like the Kenmore dishwasher as it has the cutlery basket in the door. This leaves more room for dishes on the rack instead of taking room up for the cutlery.

I have purchased a Whirlpool Water Heater on May 21, 2005 from Lowes Model number FG1F4040S3NOV, Product number 0730261, Serial number 05181291061. It is one of the Flame Lock heaters that was part of a class action law suit. The lawsuit has been settled however. I have had three thermocouples to date installed and each time the heater has gone out after three to four days. The technicians I have contacted at Whirlpool all have stated something else is wrong with the heater even knowing that this model has been seriously defective from the beginning. They always tell me to do this and that to repair it. I do not have hot water as of the date of this writing. The original problem began June 19, 2011.

Worst purchase I have ever made. When I purchased this Cabrio washer in 2015, I didnt find bad reviews but how I wish I had. This washer does not clean clothes well. It has caused holes in clothing and towels. Often all the load wont even be damp even if using the deep water feature. The wash loads rarely fill more than couple of inches. Clothes come out twisted and terribly wrinkled. Sheets and blankets will be half dry and unclean. TERRIBLE APPLIANCE. WOULD NOT RECOMMEND. Now I am stuck with a high priced washer I wouldnt even feel good about giving away. WONT FILL. RUINS CLOTHES. TANGLES LOADS. DOESNT CLEAN. DOESNT RINSE PROPERLY. DO NOT BUY!

We bought a Whirlpool model GC5SHAXVY01 side by side. The ice maker had problems within the first month, and they continued until the following year. Finally, the ice maker was deemed irreparable. Whirlpool worked with us, and we got a replacement for $600.00. The replacement had been in our home 3 months, when we realized it was leaking water. The guest room behind the fridge, had water soaked carpet, and molds growing on the baseboard. The hardwood under the fridge had been water soaked, and could not be dried by professional machines running 24 hours a day for 4 days. Oh the noise! The guest room carpet was pulled out with the baseboard immediately, and today, they are ripping out the hardwood affected in the kitchen. We called the CEOs office at Whirlpool to tell them. The answer was talk to our legal department.We are very angry. This has been very disruptive and upsetting. The floor is black under the hardwood. We are now awaiting the drying machines to come in for 3 days, and waiting to learn about what appears to be black mold. Be careful, and good luck if you buy from Whirlpool.

Everything I buy from this company breaks all the time. I purchased these brands hoping they were good but apparently not. Always have to get them serviced. Lately they did an exchange on my fridge. Hope it helps because after thousands of dollars of food in the garbage it better work. And the washer thought, Oh Im paying more. It will be good. At this point will cost me less to buy from another company. Buyers beware. Cause the company cant do nothing good for me so dont buy from them.

The first thing I noticed after purchasing this stove was that the glass top did not clean properly. I used the product given to me by Sears and tried several others but still could not take marks off of the glass top. I never really used the oven that much until retired and started baking often. The self clean does not work at all unless by self clean they mean that you yourself cleans -- I should say scrub it down. I previously had a regular self clean and it truly self cleaned. All I did was take wet paper towel and wipe out. Yet when I asked the Sears saleswoman about how it cleans I was told that it was terrific -- I would not have any problems! What a laugh!

This dishwasher (model #WDT710PAYM5) leaked water after having it for 9 months. Service man came out to look at it and said it wasnt level. The very next day when I use it the water came out again on my wooden floor. Now the wood floor looks like it has water damage. Sadly this floor was just installed.

I just contacted Whirlpool Co. by online chat concerning the workmanship of their microwave that is less than two years old. The interior top has begun to bubble and peel as well as rusting. This is the 2nd Whirlpool microwave where I am experiencing bubble and peeling paint as well as rusting. Whirlpool informed that the manufactory was 1 year warranty and to contact a technician at my expense. There is a real health issue here and I hope consumer complaints about this company is being monitored by someone who can help all of those with concerns.

Purchased a Whirlpool Cabrio 4 years ago. It worked fine until last October when I had to call a Repair Service as all the Digital Controls would not work. It was the Digital Board had to be replaced at a cost of $ 315.00. That was October 2016 and in October of this year 2017 it started doing the same thing again. I call the Repair Service and they told me not to waste any more money on this machine as it is a piece of junk. I guess he was right as when I read all the bad reviews it got today, I realize I will be better off to buy another machine. It will not be a Whirlpool product. I purchased a Sears Kenmore Washer & Dryer back in 1995 and the washer lasted 20 years and I still have the dryer. This is what you refer to as a good product.

We bought our Whirlpool Cabrio 7 years ago and it was great at first. I have not had any trouble with it ripping clothing. The clothes are clean. Its constantly breaking down. First it was the drain pump. Then the main computer board went! I called Whirlpool and of course the lady says its not covered. I had back up though. Google is amazing! I asked why this wasnt a recall as all over the web, people had this same problem. I pushed and pushed and she put me on hold. Came back to say it was in fact covered. What? Really? What changed your mind? She wasnt allowed to tell me. Supposedly had something to do with the date of manufacture. So okay, they send the repair guy out, its fixed. Now tonight, the lid locks and nothing happens! This repair was about 6 months ago. Grrrrr. Its been one thing after another with this hunk of expensive junk. When I buy an appliance I expect it to be problem free for far longer than this. I am not getting a code or anything, just dead air. So frustrating with three kids not being able to do laundry when I need it randomly :( Has anyone else had this problem? The lid locks, then does nothing. I unplugged it, pressed off and restarted it. Changed settings. Nothing is working.

I have a 5yr warranty. Im 3yrs in on the 3rd repair. Horrible. This time they cant get the part and Ive been dealing with them for 5 almost 6 months. I spend countless hours on hold trying to get a real person... When I do they send me to someone else where the queue starts over. I paid $400 extra to just have them replace the fridge and its been over a month and they cant even get a new one delivered. Just refund my money! This is beyond the pale. Dale, Sunrise Beach Mo.

I regret buying this washer. No complaint about the dryer but this washer has been the worst investment I have ever made. My clothes gets tangled up - seems like theyre not as clean as with my old washer which by the way I still have. I wanted a bigger set because I hated spending days off doing laundry but I spend as much time rewashing again and getting clothes untangled.

We purchased a brand new home with a brand new Whirlpool microwave in it. It was a combo, over the range/hood vent, model WMH1162XVB-0. Every now and again, sparks fly when preparing vegetables. Three times a repairman came to our home with no results. Each time, the problem persisted, with no improvement. On the first visit, the diagnosis was that we did not know how to properly use a microwave. It was noted that they gave us operating instructions and a personal tutorial to solve the problem.On the 2nd visit, we were instructed to buy a protective cover for our bowls when using the microwave. I asked if this would solve the problem, and was told no, but at least we wouldnt see it. This time, the random sparks happened in front of the repair man. He responded that it was the high iron content in the corn and peas that would ignite the sparks. Also, he said we needed to thaw everything before putting it in the microwave. Again, our issue was listed as consumer-use error and nothing was done.On the 3rd visit, we explained that we could not use the microwave on any setting higher than 70 for risking of sparks flying. We showed him the cover we were using, and the permanent marks being left by sparks. Again, the serviceman witnessed the sparks flying, even on thawed peas and corn that simply needed to be heated. He responded that by adjusting the power, and using the cover, we were obviously learning how to work the microwave and informed us that the next service call for this issue would be at our expense. There was nothing they would do for us, as the problem was our fault, not theirs. We explained that other neighbors with the same microwaves are not having this trouble, and we felt it was simply a faulty unit. He didnt seem to agree, nor care what we felt.I have been using microwaves daily for over 20 years. Our neighbors, having the same exact model, have had no issues at all. I know this is simply a faulty unit, and feel endangered each time I use the microwave. Whats even worse is the way Whirlpool has handled our situation. Our microwave is now 4 years old, and I have learned to rely on my toaster oven. When people visit, we have to caution them on the microwave. I will never buy any Whirlpool appliance for my home again. I do not trust the quality of their products or their service.

Initially felt the burners and oven took a LONG time to heat up, but just accepted it. After a year and a half, the motherboard died. The part alone was almost $400 and labor $100. The self clean does not work very well. Glass top is very hard to clean. It has a large oven space and looks nice, but would avoid Whirlpool at all costs following this experience.

I bought a Whirlpool gas hot water heater in 2005. In the first 12 months I replaced either 4 or 5 thermocouples and a total of between 15 and 20 from the time I bought it in 2006 and 2012. Only 1 time did the company replace one of them. When I would call them the rep would say things like, There may not be enough ventilation or Was it installed by a licensed technician? The 1 time they did take care of a problem the technician they sent out said NOTHING was wrong with the ventilation or the way it was installed. Oh yea, Customer Service told me that they did me a FAVOR (exact word) when they did that.In 2012 the hot water heater went out for good. The company would NOT do anything about it. I took it back to Lowes where I got it and they replaced it for me since the manufacturer wouldnt. The new hot water heater went out after only 3 years. I turned the hot water on and it was not getting hot so I checked the hot water heater to see what was going in. I found the pilot was burning, but the burner was not burning. I turned the water heater off and and checked everything out. When I tried to relight the water heater, guess what? It will not light. I am now being told that this heater has NO warranty, this 3 year old heater. There is MORE but I wont go into that now. Just know this has been the WORST product and the WORST company I have ever had any dealings with, PERIOD!!!

We purchased commercial washing machines for our building, we discovered that the clothes were coming out of the machines with dry spots and partials of soap. When we asked the dealer about this they sent a tech. to check the machines. It seems that these machines do not allow a adequate amount of water into the tub to wash the clothes. Only 6 or 7 inches of water is not enough water to wash a full load. When asked how this can be fixed I was told it cant be fixed. I was told this is a energy saving machine, which means you can only wash very small loads!What is the point of running a machine for twice the amount of time to do what you used to do in one load? Had we known this before purchasing what we felt was a quality machine, we are now stuck with machine not capable of doing what is required of them. When asked if they would take the machine back, no is all they say. I would never buy any product made by Whirlpool or Maytag because of the way this problem of ours has been handled. We purchased these machines from Prestige appliance, they have been good, but with no support from Whirlpool.

We purchased a brand new stainless steel refrigerator in 2013. Our 2 year refrigerator stopped producing ice and the freezer stopped working as well. We called Whirlpool customer service and they said they could not help due to 1 year manufacturer warranty only. We called another company (SoBellas) that charged us $85 to tell us that it is the seal system which should be covered up to 5 years by Whirlpool. The man showed me the Whirlpool refrigerator warranty on Google which states the sealed refrigeration parts are covered up to 5 years. There was no specific model numbers listed which gave me the impression this was a standard warranty for all Whirlpool refrigerators. I explained the situation to Whirlpool customer service including the 5 year warranty that is found on Google for everyone to see. I was told that our refrigerator model number did not qualify for that specific warranty. We ended up having to buy extended warranty for $350 on top of the $85 we already spent. This started July 24, we had to wait until August 10 for Whirlpools warranty company to see us. They checked it and said they had to order parts but he supposedly tweaked it to make our fridge run better.... It made it worse and it ended up completely breaking down. We had to buy ice chest and waited until Thursday August 27th for them to finally come back with parts and fix the refrigerator. I took time off from work once again due to our time slot being between 3 and 5 but the guy didnt even show up until 7:30. I could have worked my normal hours instead of taking more time off! The guy never once called to inform us that he was running late. We kept calling the company to make sure we werent forgotten. The guy told us that everything should be working within 20 hours or so, by Friday our freezer was still not working and no ice either, back to square one! I called Whirlpool customer service once again to explain the situation, nothing could be done. The next available time for them to come back out is September 17 for them to come look at our refrigerator. We have been stuck without ice and a freezer, buying food every other day waiting for our brand new, horrible Whirlpool refrigerator to be fixed. Will never ever buy Whirlpool brand again! Actually, we purchased all brand new Whirlpool appliances... Good luck to us!!!!!

My new Whirlpool Stove, has two grill like tops, heavy duty and awesome looking. It has a special burner to keep food warm, a stainless steel front and bottom drawer for broiler storage. Broiler is also on top in oven, broiler flame.

Our 2005 whirlpool duet washer steel drum and plastic tub broke. My husband diagnosed the problem and opted to fix it to save money. The parts are under warranty but you still pay labor and technician visit running up to $250-$300. The plastic tub was obtained only if we paid for it $100 and the steel drum they sent under warranty. The plastic tub has a hole with a black plug and sensor in it. There is a discrepancy in the measurement of the old tub and new tubs hole that is slightly larger, therefore when installed a steady stream of water leaks out. I now have 3 plastic tubs as that was their solution, to send more of the same that did not measure correctly. An investigation was done to determine they were the correct parts. As asked we had a whirlpool technician come to verify parts were correct and being installed correctly and the parts sent would not fix the machine due to the hole discrepancy. Many calls were made to whirlpool and they continue to give me the runaround. They now are not taking their technicians information. The technician has given the information to 3 sales reps in the new england area and made several phone calls to whirlpool and no one is willing to give us a solution.

We purchased a Whirlpool Estate Range in 2008, with an extended warranty. We have only moved this range out 2 times since it was installed and the last time was over 2 years ago. This range worked beautifully, no issues whatsoever. Until... tonight, the oven & one burner were being used when suddenly the range started arcing, which blew a hole through the back panel on the stove where the cord hooks to it. It continued to arc and quickly fill the kitchen with black smoke until we could reach the breaker box. The Whirlpool repairman wants to charge $88 dollars just to tell us WHY it happened. After 2 years of sitting in the same spot, why? I dont want the stove repaired, I want it out of my house! I will not take the chance that this will happen again when we are not home. When asked if this was an issue with their product, the repairman answered, I have never heard of anything like this before. After reading these reviews: Such a Liar! I wouldnt believe anything Whirlpool, or their representatives told me about their products now. I just want their crap out of my house and I will never spend another one of my hard-earned dollars with them again. Too many other choices out there. I just want other buyers to Beware of Whirlpool.

Ordered this two days after my son came home from college. He had to be out of his apartment July 31 2016 and brought 4 years worth of laundry with him. Monday my machine breaks, Tuesday I order this thing from Lowes Arrives at 2:30 on Thursday and as it is being installed I ask why the water fill is so slow. It is trickling out like a childs toy. Delivery man tells me the water is completely turned on. He hears this remark a lot from people who buy this model. I put in my first load of laundry, a small load of about 6 things that I am washing for my mother who is in a nursing home. They have that nursing home smell. I push pause as the machine is cleaning to unlock the lid and peek inside. Oh my God the clothes are sitting on top of each other not even covered in water. I then shut the lid and listen to the tiny slush of the machine agitating. At the end of the cycle they smell exactly the same. Dirty.I had read to use the deep fill so I rewash them on deep fill. Look inside halfway through and what do I see? Wet clothes piled on top of each other, still not floating in water. How are these clothes getting clean when they are in a wet pile on the bottom of the machine? I take them out. Still not clean. Not smelling quite as bad, but not smelling like soap. I then washed sheets, a blanket, and some clothing of my sons. Nothing smelled particularly dirty but NOTHING smelled like soap. The quilt was covered in hairs (my son and roommates had a dog) and soap residue. I had read this in reviews online also. I am wasting time since each load takes from 50 to 130 minutes (yes). I am wasting soap, oh but I am saving water - not really.Well Lowes has a 30 day return policy so I went down there and am expecting a GE machine with an agitator tomorrow, Saturday! Cant wait. The only one saving money are these manufacturers They no longer are spending cash on producing the agitator out of plastic, attaching it with nuts and bolts, or using gaskets between the parts. DO NOT BUY THIS PIECE OF JUNK, do not even look at it. I question all the HE machines at this point. You need to use HE soap cause you cant wash away suds in a machine with no water. What a con - the whole thing is.

I have a Whirlpool refrigerator and it is the 2nd one in 12 months. The first one the refrigerator was freezing food in the fridge part and thawing food in the freezer part. After several times a technician came to try to fix the problem and arguments with Whirlpool. They finally replaced the refrigerator. The new one is now doing the same thing. I am contacting Whirlpool tomorrow.

I have recently installed a Whirlpool water heater and was thankfully home when I heard a pop sound and my water heater had exploded inside. The heating element also caught fire. I called customer service and was not satisfied with the response from their customer service team.

I purchased the Cabrio washer/dryer in 2006. We have had it repaired 6 times and I even purchased a two year extended warranty after having issues with it the first year. Now I seem to be in the same boat. The washer will not spin and drain. This has already been looked at by a technician several months ago. I feel like this product is faulty and has not worked properly from the start. Are there lemon laws for appliances? It seems that this product would qualify. I will never purchase Whirlpool again.

Ice maker will freeze up every couple of week. I cleaned it all out last Saturday and today, Friday, it was frozen up again.

Let me start out by saying that I had a Whirlpool washer that lasted me for over 25 years and done a great job of washing my heavily soiled clothes. One day it refused to run and I tried to get parts for it but it had become obsolete and no parts were to be found for it, so I had to buy a new washer. I chose whirlpool again and let me say that it was a huge mistake. This model is a low water, high efficiency, top loading machine. It has nubs in the bottom that agitate to clean the clothes. The first time that I used the machine, I found that I had made a mistake purchasing this machine. It does not clean the clothes and there is NOTHING efficient about this machine. I have to run the washer twice to clean my clothes and they are still not clean. It leaves soap in the clothes and does not rinse them clean of the soap. What it does very well is extract water from the clothes during the spin cycle. This washer really turns up the high RPM`s on spin cycle. It has ripped apart several of my shirts during spin cycle. Whirlpool really failed badly on this machine. I see clearly now that Whirlpool is not the company that they used to be back in the 1980`s. I still have the whirlpool dryer that I bought back in the 1980`s and it still works very well. To end this story, I loaded up this NEW WASHER in the back of my truck and took it to the scrap yard and I asked them to destroy it in front of my eyes. I wished that I had recorded the destruction of this piece of JUNK and posted it on YouTube for the world to see. I got over $450.00 of pleasure watching the crane operator completely destroy this pile of crap. GREAT JOB WHIRLPOOL … YOU HAVE LOST A CUSTOMER FOREVER. I WILL NEVER BUY ANY OF YOUR PRODUCTS FOR THE REST OF MY LIFE and will advise others not to buy Whirlpool products as well. I am a male, 62 years old and work hard for my ill spent money on your JUNK. Life is always a trial, live and learn the hard way. Warning to all consumers. Do not buy Whirlpool products ever!!!! Whirlpool can K.M.A!!!!

I bought a top of the line Whirlpool front load washing machine (WFW97HEDW0) and drier with my new construction house. After a few months the washing machine began making a loud, banging noise during the spin cycle. Then about a month before the 1 year was up the unit broke and dumped all the water in the drum into the catch pan it was installed on. I called for service and someone showed up in about 3 days. The tech opened the unit and found that the plastic/composite drum the spin unit was contained in split in half all the way around. The tech exclaimed he had never come across this issue and would report in what he found but that he did not have the part and it would most likely be a whole new unit but that its up to whirlpool to make the call. I would find out that whirlpool had decided that the unit can be fixed and they have ordered the part and would call to schedule the repair.A week went by, with no word. I called warranty service company, Via Services, and they tell me that the part is on back order and that it would be two more weeks before it would come in. Now were looking at being without a washing machine for a month. I communicate this to the builder and they somehow get whirlpool to come out a week earlier than they said they could. The day came for the repair and two techs take nearly 8 hours to repair the unit (how is this efficient?).After the repair the unit ran with an odd noise that I attributed to the way it was stacked. A month goes by and two days after the 30 day repair warranty I go to do a load of laundry and the unit turns on but wont run. I called for warranty work because it was clearly not repaired sufficiently. I schedule a tech visit which is for a week after. The day come and the tech says he cant fix the unit without charging me for the repair because it is now out of warranty and if I have the extended warranty then I need to set that up with the extended warranty group. I send him away because I had just paid for the extended warranty. I called whirlpool for the extended warranty work and they schedule a repair contractor to come out in 3 days.The repair contractor calls me directly to confirm if the unit is side by side or stacked. I let them know that the units are stacked and they say they cant repair it because its a two tech job and they dont have enough techs. They send me back to talk to whirlpool. Whirlpool then notifies me that because its stacked I have to either unstack it myself or hire someone to unstack it for me. Well, I cant unstack the unit by myself and why should I have to pay someone to unstack it when thats what the unit was designed for? At this point I am going back and forth with the builder to get a refund so I can replace the unit. I will forever steer clear of any whirlpool or subsidiary products. The products are flimsy and the service is no better.

I purchased a Whirlpool Cabrio and a one year extended warranty two years ago. As soon as my warranty ended, my washer started to malfunction. I recently started to receive the F-51 code and the washer shuts down at the spin cycle. I am angry because I spent just under 1200 dollars on a washer a little bit over two years ago and now, it is sitting in my laundry room taking up space. When I called Whirlpool, they told me I could purchase another repair warranty for $316.94, which would take the cost over 1500 dollars for this washer and there was no empathy nor compassion for what I was feeling as a consumer from the customer service rep. I spent my hard-earned money on major appliance purchase and I think that it is only fair that I get more than a two year usage out of machine that was designed to last at least six years according to their website. There is no way that this should just be my lost and cost me additional funds.

We purchased our Whirlpool Gold series, french door refrigerator 22 months ago. The freezer and ice maker has stopped working. We had one repairman come out already and he couldnt fix it. We have another one coming in 2 days. I am very disappointed with the Whirlpool brand. I also bought a microwave, 2 wall ovens, and a dishwasher at the same time. The microwave makes a clicking noise every time you use it.

I spent the extra money and bought a very nice looking Whirlpool range and oven. Within months, it started rusting. I keep a meticulously clean kitchen and Ive never had this problem with any other appliance. I sent letters to no avail. They said that their warranty on rust was 30 days! They refused to do anything about it and told me to go ahead and sue them. Terrible product. Defective from the factory. Do not ever buy a Whirlpool product as they do not stand behind it.

First, let me say we are so lucky and blessed to get home in time to prevent my home from burning. My Whirlpool range, model 4rf364pxk0, apparently decided to turn itself on (no one home) and grew hotter and hotter. It obviously burned out the thermostat because it was way hotter than cleaning mode. The key pad was melted and sagging inward the control panel warped, heat pouring from it. The racks and interior were glowing orange! My back splash tile blackened and cracked! The oven door locked! Oven hood ruined although it probably saved my cabinets! We hit the breaker! There was so much heat you could feel it on the outside of the exterior wall of the house 30 minutes later! The clean up to my kitchen has been horrible. Black soot and strange greasy film on everything and the stench has been toxic enough to give my husband a raw throat and myself a migraine! Oh and here is the ironic part - my husband was bringing me home from a hospital stay from high blood pressure! It would be almost comic if it wasnt so darn scary! Please, please address this issue before a more tragic story is posted! From looking at this site, it is obvious that there have been other incidence of your stoves turning themselves on and uncontrolled heat. I firmly believe another few minutes and our home would have been engulfed in flames. Now I will spend my weekend shopping for a new ceramic range, hood and tile!

Ive owned whirlpool appliances for forty years or more, and have been consistently pleased with them. My first washer and dryer lasted eighteen years while raising a family. Brand X lasted eight years with at least four repairs before we dumped the set. We moved and sold one set with the house, but my newest washer and dryer set is eleven years, and works fine. Ive had at least four ranges. We sold two of them with the houses, but theyve all been fine, just bought a snazzy new Whirlpool range as an upgrade. Im on my fourth Whirlpool refrigerator, but again we sold one with the house and we upgraded one perfectly good Whirlpool refrigerator to a bigger side by side with icemaker. Third whirlpool dishwasher. Weve moved a lot, leaving behind appliances and buying new ones. Sure, Whirlpool appliances break down, but they sell zillions of them, and you never hear about the zillions that never break down.

We purchased a Whirlpool front loading washer about three years ago. During our first year the machine worked OK, but three months after warranty expiration (12 month warranty), the sensors seems to go wonky and it no longer worked (at 15 months of age). We paid about $95 in the Minneapolis area for a service call. The repairman had to call Whirlpool from our home to inquire about the sequence of flashing lights on the sensor. After getting off the phone he told us he thought he knew the problem, but could not guarantee that the $200+ part he suggested ordering would solve the problem. The installation would require additional labor charges, of course. I reported the incident to the manager of the repair service and was told the repairman was expert in Whirlpools but this did not further inspire confidence. We were not willing to sink this amount into the machine, so ditched it and bought a top-loading inexpensive Roeper. The top-loading machine definitely appears harder on the clothes than the front loading Whirlpool, but it gets the clothes cleaner and has been problem-free so far.

After reading all of these reviews, Im not surprised at the negative comments. My husband and I owned a Whirlpool washer and dryer for 25 years prior to them both dying the same summer four years ago. I absolutely would not purchase anything but another set of Whirlpool washer and dryer because of the longevity of our previous set.We bought the Cabrio set 4 years ago this summer. After two years, we discovered it had a slow leak at the back hot water valve and underneath it somewhere when it spun and it had slowly leaked under the wall into our living room which eventually caused our hardwood floors to buckle. We had to replace the flooring in that section at a cost I will not even say and had a repairman come out and fix the lid lock, leak where for some reason there wasnt a washer in the valve area, underneath and the problem with the spin cycle. This was at a cost of around $200.00. Of course our one year warranty had run out. The next year it did the SAME THING AGAIN!!! Although we caught it quicker, we STILL had to replace a small section of hardwood flooring and have the machine repaired yet again at the tune of approximately $200.00. Now, as I type, our machine has yet again flooded our laundry room one year later and I will have to call a repairman in the morning yet again! Its becoming an annual and costly thing!!!I came across this site while looking to see if by chance this machine had been recalled and we would be able to get another one at no cost since we have already paid a fortune for the errors it has caused. I will be reporting to the Better Business Bureau and writing YET ANOTHER letter to the Whirlpool company with the hopes that they will recall this machine!! If enough people protest and report this shoddy workmanship, maybe they will!!!

Stainless steel fingerprints and rusting are terrible. The storage doors in the freezer have an open bottom which allows items to slip out which is annoying. The fridge has ample space for all my items without being overly huge for no reason. Great for 1-3 people. The rest is perfectly fine.

I felt compelled to write this review, to sum it up NEVER buy ANY Whirlpool, KitchenAid etc brand. Nothing but the worst experience, it all started with a 5 year old Whirlpool fridge that stopped cooling, I called and they said they could send someone for like 200$ and that it does not guarantee it will be fixed. So I called an independent and he tried to refill the freon, but it was leaking behind the fridge in a section you cannot access because they want you to buy another one, so 5 year old fridge in the garbage and now to top it off, a KitchenAid knife set that is barely used, one of the big knives broke cutting a fruit, and good luck in any circumstance getting any customer service. SO NEVER AGAIN, TRUST ME AND PUT YOUR MONEY ELSEWHERE ON ANY OTHER COMPANY.

I have a Whirlpool Cabrio washer and dryer set. The heating element went out on the dryer when it was less than a year old. I purchased the set at Lowes. They sent out a repair person who called and told them it was the heating element and he replaced it. Two weeks went by and I could smell something burning. I called Lowes and after two weeks wait the repairman showed back up. He said that the control panel was bad. Lowes replaced my dryer and I have not had any further issues with it. Lowes gets an A+. My washer went out about a year later. It was making the loudest noise on the spin cycle. The repair person came out about 2 weeks after I called and told me that the washer was basically worthless, that the repair would cost more than the washer would to replace. I was totally shocked and decided to use it until it died. In the meantime, I found a repair/used appliance place. They repaired it for $235 and it ran for about 4 months. Then the noise returned. I have had it repaired again. Now the control panel gives me the SE light and stops running with 27 minutes left in the wash cycle. I have had nothing but problems with this machine. I would not recommend Whirlpool to anyone. Im going to have to replace this machine and it has cost me lots of $$. Junk!!

I purchased this refrigerator, approximately 3 yrs. ago. Right away the top crisper broke. I have put up with this broken crisper only to have broken the PLASTIC lips that hold the crisper to the top shelf. Piece of junk. I looked to order a new crisper but way to expensive so I just suffered thru. I cant even use it anymore as I cannot open or close it without it falling onto the bottom crisper. Would like to throw the thing out, but cannot afford another one. IT WILL NOT BE A WHIRLPOOL!!!

Washes great. Love the literal bells and whistles. Never has failed to give the family a very clean wash. Price was great and got the matching dryer too. I have heard prices have gone up but this washer is worth every penny.

Whirlpool Gold model WRS526SIAHOO - We purchased this refrigerator 10/2013 with all the matching appliances when we remodeled the kitchen. We moved our 1997 GE refrigerator into the garage. Now the computer board has gone out in the Whirlpool and we are back to using the 97 GE. The technician told me that he sees a lot of these boards going bad.

Two years ago, I bought your new stove. It was under warranty. The computer is messed up. They came and they did not fix it. Warranty is off. It hasnt worked right since I got this stove. Who is going to make it right? Its only two years old. Fr2 v comes on when turn on. Oven have to turn power off to get it to work. This stove sucks.

Purchased first water heater in 2008 with 6 year warranty. In 2011, pilot light would not stay lit. Whirlpool told me to go to Lowes and get a new one at no cost. But I had to pay for service to identify the problem and installation of new one, costing $250.00. A year and a half later on a six year warranty, the same issue the pilot light not staying lit. They send a pilot light assembly and we pay the shipping and installation cost of $130.00.Two years later, the same issue begins again. Calling tech support, they determine it needs a third pilot assembly at $30.00 for shipping and $265.00 service installation fee by a certified Whirlpool technician. Worked one day! Im so done with this company!!!! I was promised a call from a supervisor with Whirlpool which Im still waiting on days later. Probably for the best at this point. I think I would feel better if I could beat the crap out of a Whirlpool CEO with it! Im cutting my losses and going with a different provider. I will NEVER again purchase another Whirlpool product!

I just purchased a new Whirlpool 6th Sense hot water tank #333570. This unit is a piece of garbage. Whirlpool should be ashamed at the quality of product they make. This unit came with a bent temperature and pressure relief valve, which required a piece of copper tubing to be bent awkwardly just to remedy the situation. Also, the control box is set at 12 (most other brands are 14, which is common), forcing the gas lines to be re-piped (very expensive). This unit also is extremely noisy, runs really, really hot and is not energy-efficient at all. Shame on me for not researching this product more closely. If youre buying a new hot water tank, steer clear of Whirlpool products.

I like my dishwasher very much. Because we have hard well water I use Lemi Shine to cut down on any deposits. The top shelf is adjustable so that helps with large pans getting clean.

I purchased a 50-gallon Whirlpool natural gas water heater (12 year warranty) from Lowes approx 2.5 years ago. Just before Thanksgiving, the pilot light started going out once a day, then twice a day. Now, I can light the pilot light in Pilot mode but as soon as I release the red button, the flame goes out. I called Whirlpool and received phone troubleshooting support resulting in a recommendation to pick up a new thermocoupler from Lowes which I did. While searching for someone to install (unfortunately Im not that handy), I ran into the thousands of complaints filed about the very same problem Im having over a number of years and right up to todays date. I called Whirlpool back and got the same song and dance. Theyd be happy to help me troubleshoot if I can get the required meters etc. to test devices, do draft tests, etc. They claimed the problems were fixed with the newer model that I have but certainly cant explain why I have exactly the same issue. What they are not willing to do is stand behind their product and get me hot water. Tried calling Lowes and got the response that I have to deal with Whirlpool. It appears that this newer BFG model is just as flawed as the older model and the warranty is pretty much worthless other than getting a few parts. I used to think that Whirlpool products were reasonably good, however, I will never purchase another.

I HATE, HATE, HATE the aqua lift clean feature. Its awful. The bottom came somewhat clean but cook bacon and the sides and top are filthy and the aqua lift cant clean that. I dont know how this ever made it past the thought process stage to become a thing but it needs to go away. Im quite cranky right now as Ive just spent two hours scrubbing my oven while reaching past the oven door that doesnt come off because its a self-clean oven. This is what I have to look forward to for the next 10 years until it dies and I can get a new oven? What a joke!!

We purchased a Whirlpool (gas) range with double oven, in April of this year. We found that the upper oven over heats, on the right side, and therefore burns or bakes unevenly.The repair company will be out for the fourth time tomorrow. They have been very nice to deal with, but really have not been able to repair or come up with any definitive plan of repair action.

My refrigerator has needed several repairs in the 5 years since purchased new. Several plastic parts (bins, handle, etc...) have cracked and ice maker no longer works. Dont think I would purchase another Whirlpool major appliance if at all possible, as I am deeply dismayed at how this one has held up.

I have the 4.3 cu. ft. washer. This washer worked OK, but the lid lock does fail after about one year if the washer is in an environment where moisture may be present.I noticed the lid lock not working all the time about two months before the warranty expired. If this happens, call the warranty department immediately. After checking the ground wire and resetting the washer power over and over again, the lid lock finally stopped working completely. Here is how to fix it:There are two screws on the back of the top portion of the washer. Unscrew them from the silver straps. The washer lid will now push forward and up and off. Prop it up with a stick.Unscrew the two screws on the lid lock and start taking it apart (after reading this entire review). Be careful not to lose any parts and be sure to know where everything goes for re-assembly. Take pictures if necessary. Take the lid lock completely apart including any small pieces.The plastic slide needs to be cleaned. It has a spring that may fall when you pull it apart.The metal contact points inside the lid lock mechanism need to be cleaned. Be extremely careful when pulling the red cover off of the housing assembly. Pull the four metal contact points completely out of the plastic assembly. Be real careful with the black plastic slide piece, the metal rocker switch and the switch actuating motor. Use a small file and rubbing alcohol to clean off any green or white corrosion. Make sure to check all contact points.Re-assemble and you will immediately notice the lock switch working better. Re-install onto the machine. Re-install the upper portion of the washer. Start your laundry. Repeat after one year or when the lid lock becomes faulty again. These points should have been made out of a less corrosive material. Poor craftsmanship. Would not recommend.

WTW6340WW0 - When washing clothes, on the last spin it stops and gives an UL error message. I make sure all the clothes are level and restart at that point but still the UL error message appears and water starts leaking from the underneath of the machine. Weve reset the and unplug the machine but no difference. Please help on what else to do.

After 2 years it stopped draining. We have to physically hit cancel to get it to drain. Also, I have had to make my own tool to take bottom spin bar off to get to and unjam grinder and we pre-wash all dishes.

I purchased my Whirlpool Gold Series refrigerator from Lowe’s in Rockledge, FL. This was my third purchase after returning an LG Refrigerator as well as a Samsung refrigerator for having multiple defects! My Whirlpool Refrigerator purchased June 2014 has motherboard replaced that showed obvious evidence of factory board flaws when boards were manufactured. Top mounted ice maker drips so much water it fills my veggie draws with water ruining my food. Mold is present inside my ref now from constant leaks. Drawers were replaced by tech also due to ill-fitting design during first few months. Water will not dispense in door after one year, gave up using it. This is a horrible and very expensive appliance wrought with POOR DESIGN FLAWS. WHIRLPOOL does not care about its consumers. Their engineers must be some of the worst in the world. Our old 70-year-old kerosene powered refer in the Bahamas is still making ice, yet most modern day refs are like buying cheap home computers that constantly need service to keep them running. It’s a lifetime investment with $89 first service visit to determine problems then weeks of waiting for parts and second visit for the repair to be completed until next electronic malfunction. DONT BUY A NEW WHIRLPOOL APPLIANCE. WAIT AS LONG AS YOU CAN FOR ALL THE CLASS ACTION LAWSUITS AGAINST WHIRLPOOL & Kitchenaid to play out.

I do not use my oven much, mostly to heat up something. I noticed all of sudden I couldnt get the microwave to work at the same time as the oven. Then the controls stopped beeping. Then I went to heat up the oven and it started smoking and had a terrible smell. I am two weeks out and still no microwave or oven. The repairman was very nice. Came out and ordered parts. I wanted a new oven and I was told no. Parts came in. Repairman came out and nothing worked. Waiting, waiting and waiting. I will never ever purchase a Whirlpool appliance again. This is not my first bad experience with them. I thought maybe they got better but that did not happen.

The self cleaning work very well. All you need is clean the filter every time you use the dryer. I had the large capacity. I can wash my blankets and heavy clothes like commercial machine and the machine is programmable for your wash load.

I bought a Whirlpool Cabrio washing machine from Lowes 3 short years ago. Within the first year, it needed a new main board. Now just 2 years later, it needs another main board. It has never worked correctly. I have purchased another washer from another manufacturer and will never buy a Whirlpool product again and neither will anyone I talk with about this. Dont buy Whirlpool products!!

Since buying a Whirlpool Cabrio washer about 3 years ago have had several breakdowns. Within 6 months the computer completely failed. Since then it failed again. About every six months it costs me around $125 to get it running. The thing is a piece of junk. If the load is slightly unbalanced it just shuts down during the spin cycle. The old Maytag we had ran for over 25 years with the belt replaced once. No other problems. Will not buy another Whirlpool again.

I have the same issue with cooking time on my Whirlpool wall oven (WFE54OHOES). Bought it in January and have not yet had a single recipe come out cooked. Outside is crisp, inside uncooked, after twice the amount of time it used to take. Its still under warranty. Service came out and told me to bake differently. Thats an answer for you. I am going to pursue this issue with Best Buy where we purchased it.

This dishwasher is noisy, it does not get the dishes clean, and anything that is remotely lightweight gets thrown all over. This must be one of Whirlpools cheapest models as I have had other Whirlpool products and they were fine.

7 months ago we had a Whirlpool dishwasher installed into our home. While away on vacation the piece inside malfunctioned and caused major damage as water filled the home. Whirlpool claims, that because it’s a part that they contract out to another company, they “Whirlpool” are not responsible! If you purchase a product from Whirlpool and they put their name on that product, then Whirlpool should stand by its product. Well... beware, you’re not going to compensate from Whirlpool! We urge you, make sure of whom the parts of the product your buying from belong to, before you buy it FIRST! Never again!

I purchased the Whirlpool Cabrio Washer thinking I was purchasing a quality product. Unfortunately it was one of the worst decision my wife and I have made. The bearings (lower) only last about 2 years. We purchased the extended warranty and the first time it was covered. The second set were not covered and now we will have to change them again. We will not ever purchase another Whirlpool product. I contacted them several times with no positive results. I still saved the last worn out bearings to show the CEO. The engineers do not have a very good idea to make the lower bearing last. Where I purchased the machine they told me after the first change that it would happen again and they were correct. If anyone needs to contact me about this product feel free. NEVER EVER BUY A WHIRLPOOL PRODUCT.

Ive had my Whirlpool Refrigerator for 2 years. Within that 2 year period, all 3 of the drawers within the refrigerator have broken and now there is a crack in the freezer on the bottom starting in the front and going straight back on the bottom to the back and up the back. After pleading my case for a new fridge to their Customer Satisfaction Department and everyones supervisor therein, theyve offered to pay for the epoxy repair. Im very dissatisfied with this! I dont think that a $1300 fridge should be held together by glue after only 2 years. Ive been waiting for one of the drawers to be replaced for over 2 months. They claim that the crisper pan is out-of-stock and they have no information if it is in production. Im to call back in 2 weeks to find out the status of that part. I would like to add that my husband and I work 6 days a week and our adult children are rarely here, so this refrigerator is very lightly used. We dont have a household of 6 or 7 people constantly home, opening the doors and sliding out the drawers. The fridge that I had previously was a GE and it lasted 30 years. I guess the next one will probably be a GE. I just wanted something different. Well I got it. Its something broken.

Whirlpool Cabrio Platinum Option - Very stylish. Well built - very solid and heavy constructions. Full features from quick wash to sanitary wash, very energy efficient, steam setting on dryer for touch-ups. Quick loads, etc. We were looking for a washer and dryer set that would accommodate large quilts and blankets and still have the flexibility to handle small and delicate loads, and be energy efficient. The Whirlpool Cabrio Platinum Option is solidly built and very sturdy. It handles small and large loads and is very energy efficient. Both the washer and dryer handle sheets and pillowcases without a problem. Wed recommend them to anyone.

I have owned this Whirlpool Cabrio machine and dryer for almost 5 years. It has been a nightmare. I am forever getting it fix. Now its the notorious LD light, not draining, and it has actually drained, and the company I bought it from does not repair them due to so many problems. Got a plumber to look at it and got it to work.. This is after the company came, charged me 130.00 to tell me they dont repair it. I bought this machine because it was large and I have a big family, energy saver (no, it did not save as much as they claimed) and uses less water. The dryer is wonderful. But the 1900.00 I paid for them was not worth the price. I now have to go up and down my cellar stairs 6 times per wash to stop it, shake the hose, and restart it. A load of laundry takes close to 3 hours due to starting it over. I am gonna buy a Maytag which I use to have and take this to the junkyard. Thanks a ton, Whirlpool and I read all comments and they are ALL true.

Whirlpool Dishwasher Quiet Partner III Model #8575637, White - Purchased in 2006. As of July 2013, I can say this is the worst dishwasher we have ever owned. After normal use (once a day or less), the plastic on the front control panel began cracking in the first year, and the button covers have fallen off completely. Dishes were never completely clean (at least not as clean as other dishwashers). Dishwasher leaked out one side and needed repairs. Now it is in need of a new valve, because no water is coming into the inner cavity. Repairman says it is likely that the control board, which is getting moisture into it after losing buttons, etc., will probably need to be replaced soon as well. $300 more to spend on a repair bill. SAD (AND DANGEROUS!) THAT SO MANY APPLIANCES ARE ADDING UP IN OUR LANDFILLS. There should be a LAW requiring appliances to last a certain number of years, and to clearly state their expected life on the appliance when you purchase it. Planned Obsolescence is a common business plan these days, but there must be some control on what is allowed! (I may go ahead and repair this model just because I feel bad adding one more piece of junk to our collective global pile! Sheesh!!) And all those energy star, were so green advertisements? Well, if its soon to be sitting in a landfill, its NOT so green! I am willing to pay more to purchase appliances that will last a number of years, not need many repairs, and function as they advertise... Thank goodness I kept our very first Whirlpool refrigerator - never needing any repairs and still running like a tank out in the garage. (So I know Whirlpool, at least at one time, was able to build a quality product!)

Not real expensive but cleans almost perfect. Were happy. MUCH better than the beautiful and pricy Samsung. We returned it for this. Paid less than Samsung but always purchase extra warranty. So far so good. Pretty quiet. Nothing to complain about except be very careful how its loaded to get the best cleaning. Heat dries dishes really good. Looks great but not better than others.

I replaced my hot water heater after 22 years and no problems. We got a 50 gal. gas heater from Lowe’s in 6/2008. In 1/2012, we had no pilot light and an alarm on high temp sensor. Whirlpool sent a new sensor and control valve to replace the bad unit. Here we go again, on 3/2013 - same parts same problems. We now have the cost again to have the parts installed for the second time. I have spent 1/2 the cost to have the parts put in than the cost for the heater. I will never pay for any Whirlpool product again. They are plain junk!

Misinformation provided about their products - I ordered the Whirlpool 30 Drop-In Electric Range pictured in their literature with a gray oven door. When I had it installed, I thought it had a green film covering the oven door. It is not a film. It is the oven door color. It does not show that or talk about it in any of the literature. I would not have bought or paid to have this range installed. The green color does not go in my kitchen! I would sue them for misinformation if I had the money to spare! I will never buy another Whirlpool item.

Well, I read most of the complaints with the failures in the machine. I guess most of them didnt last long enough to rate their performance so here we go. I bought a Cabrio top loader, high-E washer a couple of years ago. This one had a different kind of agitator - it was just a couple of inches or so off the bottom. I specifically bought this to wash comforters and it seemed like it was good for that (rousing agreement from the salesperson). So after a couple of years of working with it, here are my observations:Pros: There are absolutely none!Cons: Okay, other than not having control over the settings (cannot override any of the preprogrammed wash settings), it simply doesnt get loads clean (yes, I use expensive HE detergent). Except for the bulky setting, there is never enough water to wash and rinse the loads properly. Next, it makes a mess of the clothes. At the end of the cycle, and this is true no matter what I wash or how large or small the load is or which cycle I pick - even light and slow spin, it just makes a tangled mess of the load. Stuff gets stuck inside of other stuff, wrapped around other stuff or are balled up. Never have I seen this type of issue. I constantly get the unbalanced load notice and have to manually redistribute the clothes most of the time.To address the too little water level, there are two options. I have discovered that the bulky setting has the highest water level, so I use that most of the time. From time to time (when I need different water temps or just want more water), I have developed a work-around by putting a Y adapter on the hot water inlet and a short hose. Once the washer starts the wash cycle, I stop it and add a bit of hot water to bring the level up enough to do a decent wash job - same for the rinse cycle. So much for Whirlpools water efficiency.Next, the hot isnt hot. Its barely lukewarm. So I turn the cold down to a trickle and I get a bit hotter water. It takes forever to rinse though. Its a good thing Im semi-retired. Next is the inflexible cycle/water selector. I have never had a washer I couldnt override to tell it what to do in unusual circumstances. Boy, what rocket scientist at Whirlpool dreamed that up!But above all, this just doesnt get loads clean. I have experimented with all the variables, load size, cycle selection, detergents, etc. Most of the time, I have to do two cycles with my loads and these are not unusual or extremely dirty loads. They are just normal, everyday laundry for an adult couple. Really, Whirlpool! Who was the conceptual designer on this? Thank goodness they werent working on the space shuttle or some disease research.Bottom line, I am so soured on the design and performance of this product that I will never buy another Whirlpool product, either brand name or generic (Sears). I just cant understand how a company would let something like this out the door.

We purchased a Whirlpool washing machine for $600 from a local retailer and it broke down within three months. It is now been two months and two repairman visits later and still not fixed. I called them and talked to customer service who then transferred me to another department. So far it’s just been the typical runaround with no results. I demanded an immediate replacement but was told that would need approval from yet another department. I don’t remember what departments are involved nor do I care. I am simply disgusted with this baloney.

How I wish I had read this board before purchasing! This is the worst washing machine made. Put your clothes in the sink, add water to cover two thirds, add detergent, slosh around slowly for a few minutes, wring and remove. You have replicated a Cabrio wash! I have complained repeatedly, had a repairman who assured me it was working properly (as designed, too little water, too little agitation). I was a lifetime Whirlpool client.

I need to start by saying I or we, my wife and I are both disabled - her with a head injury and a prosthetic leg and walks with a cane and myself well Im stuck in a wheelchair, this makes grocery shopping more of a chore for us than most people and putting things away is part two for this chore. I figured Id buy the biggest, best (LOL) refrigerator Whirlpool had to offer, so I could do our grocery shopping once a month and have a place for everything and the fridge being so big would be capable of holding a months worth of food. It performs that function very well!The problem began when I purchased this wonderful piece of quality craftsmanship (cough) at Lowes in Denton Texas on 6/19/13. While one delivery guy stood on my sidewalk talking to me, we watched the one other guy bringing my rather large brand new Whirlpool refrigerator up the driveway with a regular (not an appliance) dolly. After getting to the end of the driveway and having to go through the front yard to get to the sidewalk, the monster fridge started leaning and eventually ended up on its side in the front yard, needless to say I was a little concerned about damage. They continued to get it in the house after providing me a nice gouge in the door frame before realizing it may be best to take the front door off before entry. So after getting it to the kitchen and removing the box we noticed the left door was way out of whack, so the delivery guy called his boss and we all agreed I needed a new refrigerator. A week later my second new refrigerator was delivered, no box around this one but it made it all the way into the kitchen without a hitch or any more scraps in the front door frame.Three months of dealing with water running down from the ice maker into the door storage areas I made my first service call, the guy said Whirlpool doesnt always put the correct thickness of gasket between the ice machine door and the ice bucket. He ordered gaskets and installed them the next week. Water continued to run down the door from the ice bucket to the shelf storage. 5/14/14 I called for another problem. The refrigerator seems to be running all the time, and there was a fan starting and stopping continuously as well. This was Miles Appliance - he seen the water running down the door and squirted a tube of sealer in the ice machine, replaced the little plastic fan and said that should fix it! I let the Whirlpool service scheduler talk me into the extended warranty since my one year warranty was about to expire so I bit and bought the warranty. 7/18/14 the fridge had a new sound going on for the last few days and still seems to be running all the time. I called for another warrant service, this time I drew In Home Appliance Repair. After waiting three days a guy comes out, verifies the fridge isnt cooling properly and tells me to unplug it for three days, so the ice ball that has formed somewhere can melt, that the noise I was hearing was a fan rubbing against the ice ball. So three more days go by and I plug in the fridge. Two days later the freezer has only cooled to 50 degrees. I called In Home Appliance Repair and they told me Id have to call into Assurant to make another service ticket, which I did. It takes two to three days for service tickets to get processes. After the second day, I called McNiels in Denton to see when I was going to receive my service, they didnt have a ticket for me. I told them Assurant said they would be providing my warranty service. McNiels told me they only service what they sell! I called Assurant back, they turned it over the scheduling gods. Three days later they set me up with a repairman 45 miles away. After waiting on him for four days he says he just doesnt have time to come by and pick up my refrigerator to take to his shop. I call Assurant again and am told its being turned over to the scheduling gods again. Three more days go by and they set me back up with In Home Appliance Repair. I call and they tell me they will be out on July 7 2014. The evening of July 6, 2014 In Home Appliance Repair calls and tells me theyve decided since the defrosting didnt fix the problem two weeks ago it was a system failure and they dont do that type of repair, they would call Assurant for a different service provider. I call Assurant to see whats up, they tell me A&E Factory will be out on July 13,2014. Now nearing a month WITHOUT a refrigerator and still not knowing how long its going to take to fix the problem! If Whirlpool is trusting Assurant to provide extended warranty service then thats exactly what they should be doing, it certainly isnt my fault they cant get service people out in a timely manner to resolve appliance issues. Its not like being without a stove or microwave - this is a refrigerator!!! This is the poorest service I have ever received from Whirlpool and Ive been a faithful Whirlpool customer for many years. In my opinion they should bring me a new fridge, haul this piece of crap to the nearest dump and be done with it! And after reading some of these posts there are lots of people that feel the same way about their appliances. This type of Customer Service needs to STOP, $2700.00 for a refrigerator and have to deal with crap like this is crazy!!!

Refrigerator making a non stop loud noise, model WRF560SFYH01 - Thought I was buying a reliable product with a good name. Should have read other customer concerns as it seems like the products last as long as the warranty. A few months after the warranty, my refrigerator started making a very loud noise. Repair person takes it apart as the diagnostics showed no error and his best guess was a thermistor as there was ice build up making contact with the fan. Replaced it and the total of the bill was $174.23 and this may not even be the problem. If it is the board not reading properly, very expensive.

I purchased a Whirlpool gas hot water heater in July 2012 and have had to replace the control/pilot light mechanism every 6 months since then. Whirlpools customer service is the worst service in the world. They are rude. I have followed their instructions every time and have been accused of being uncooperative. I paid $350 to $400 for my heater and just spent $200.00 to have a plumber put apple cider vinegar in my tank.I was told by Whirlpool that the calcium sediment was causing the problem... I drained this tank twice and there was no sediment in the tank. This is evidently a common error for Whirlpool tanks. I will never purchase any Whirlpool product again and will tell others that their products are crap. The worst part was the inconsiderate customer service. I dont know who trains them, but they need to fire the entire bunch. Shame on you Whirlpool!

Purchased a Maytag refrigerator in 2009. Was told Whirlpool bought out Maytag, never had a problem with it ever! Speed up to 2012. Purchased another refrigerator this time a whirlpool. HAVE HAD NOTHING BUT PROBLEMS WITH IT! This is the 3rd or 4th time the veggie/fruit drawer POS plastic track has broken. I purchased the extended warranty after a year and in addition to the above, had a new ice maker replaced, and a part in the freezer as the freezer wasnt freezing. So I called them to replace the drawer plastic track again and they say that its a cosmetic problem and they wont cover it. Are you kidding me??? It holds the drawers in for crying out loud! Also told the repairman that the ice gets clogged in the dispenser and either 1) melts all over the place or 2) comes pouring out when you open the doors. He tells me that its best to just use the ice cubes and not the crushed. Again... ARE YOU KIDDING ME? Thats why I paid so damn much money for this one as I wanted crushed ice! There should be a recall on this appliance. Repairman says all the models with the icemaker on the left side have problems with freezing and when inquired about my lettuce freezing and getting wilted or brown, he says that the humidity buttons are really only for looks and dont have a purpose!!! Believe you me... I will be sharing this on social media of all types to get this resolved. WHIRLPOOL BIGWIGS LISTEN UP! YOUR PRODUCT STINKS!!! Since we were gone on Friday when the call came in that they called it cosmetic on the drawers you bet Ill be giving these extended warranty people a call too tomorrow! Also dont say we have too much in our drawers because theres barely anything in them at all times. Its just used by 2 retirees!

I have a front load Whirlpool Washer and it has leaked within 6 months of having it. The rubber piece was replaced and it still leaked. Whirlpool wont take responsibility for its product. I have to put towels down around the washer every time I use it because it leaks. I purchased this because it is more economical to use a front load but not when water is leaking from the washer.

We recently purchased a new Whirlpool refrigerator and washer/dryer set from Home Depot. The truck for delivery was late and unable to pick up the refrigerator in time for scheduled delivery. Whirlpool contacted us to inform that it was now on back order for another week claiming there was nothing else they could do. Strike one. We paid for the installation and kit for the washer and dryer set. The tech who delivered them claimed the kit was not correct and that he could not install the dryer. We contacted Home Depot, Whirlpool, and had Home Depot call Whirlpool on our behalf with no resolution. They will not refund the installation even though they didn’t install anything.Whirlpool will not directly say whether or not they will send someone else out to actually install it this time. To top it off - I asked the Whirlpool rep which kit needs to be used and she told me whichever I want... for a gas hook up... whichever I want. This is ridiculous and Whirlpool has the worst customer service I have ever experienced. Side note - don’t waste time on the chat feature they provide. You will be directed back to the 800 number with 30 minute hold times. Horrible company!

Like everyone else here, I had to call a repairman to have a look at my washing machine after 4 years of limited use (only my husband and I). As soon as the repairman looked at it, he told me theyve had so many calls for this particular washer. He ordered a new part for it, but it did not fix the problem. Thankfully we purchased extended warranty and we were credited the full amount + tax. Today I picked up a brand new Maytag washer. Cant wait to try it. Thanks Leons for the great service.

I replaced our old Whirlpool washer that we had for 10 years with a new Whirlpool high-efficiency front load washer in August 2020 - it quit working on December 11, 2020. Got a repair person through Whirlpool on December 22nd who said I need a new motherboard. I am still waiting!!! 42 days with no washer and Whirlpool has no answers regarding the parts arrival and I can’t even sell the thing and get another brand because it doesn’t work! I’m beyond angry!!

We purchased the unit in March, by April it wasnt cooling. In June it shut down. In July after 8 tech appointments and repairs. Whirlpool finally said they would refund my purchase and I should see the money in about three weeks. That would be about a week longer than the refrigerator worked. I dont have the money to just get another one so I guess the family will be without a refrigerator for another month. That means shopping every day for perishable for a family of 10. I would not recommend another Whirlpool product. This is no joke, every time I called them one of the first things asked was Did you get the extended warranty? Why would they ask, sounds as if they dont trust their own product either. This unit was purchase online through Sears.com. Purchase price was $2299.99. Order placed on March 4, 2017.

Two Whirlpool washers in six years that the barren in back of tub goes out. When the first one went out in the same month the warranty expired, I was told by a repair man that it was not worth repairing because of the cost. I purchased a brand new Whirlpool and only months later, the same parts are broken on this new front loader. How cheap is the Whirlpool app. made? Whirlpool wants to only send me a tech. to fix washer instead of replacing unit altogether. After all, the unit is only a few months old. I cannot believe I have to deal with this again.

My 2010 Whirlpool refrigerator stopped working, due to a compressor issue. I need to purchase a new device ASAP.

In October 2009, I purchased a Whirlpool Energy smart gas water heater with flame lock safety system.$509.00 I had it installed on 5/4/2009 by Westmoreland Affordable Plumbing, $218.00. On 10/15 called Whirlpool stating that the upper thermistor was coding as a failure. They sent me another one to replace it on 10/19/2009. On 10/19/2009, 1 and 1/2 hours later, the tank was coding a bad gas valve, called back and told Whirlpool what had happened and that I smelled gas. I shut off the gas to the water heater and waited for a valve replacement to arrive. On 10/21/2009 I had E.H. Plumbing to install the new gas valve to the water heater, $150.00. On 10/28/2009 the new gas valve went bad. I contacted Whirlpool and argued with them until I had them replace the hot water tank. With their approval I went to Lowes and tried to get the same water tank but they no longer sold that model anymore. I was given their equivalent to the one I had purchased earlier. I had it installed on 10/29/2009, $150.00. I now see a class action suit was filed against Whirlpool for the model in 2008. They were still selling this model after the lawsuit???? I spent $1027.00 for a $509 hot water tank and a lot a days without any hot water. I have all my receipts and returned codes for this transaction. Is it possible to get my $300.00 back (for two extra installations) as a result of this problem? I also kept the old gas valve thermostat.

My Whirlpool has been in use about three years. It was purchased on sale at a very reasonable price. My only complaint is the heat dry function which somewhat fulfills its purpose, but I usually have to hand dry some dishes. Overall, it is an average dishwasher that gets the job done. The best feature is that it is very quiet; you barely notice that it is running.

My Whirlpool washer would start up but would not add any water. It sat there doing absolutely nothing. Then it showed a code on the screen. It said to disconnect the power for 1 minute and plug it back in, which I did. I repeated that process several times. Still nothing. It also said to call Whirlpool, which I did. They wanted the Model # WFW97HEXLO and Serial #, I gave it to the gal on the phone at Whirlpool. I was told it would be a week before they could get someone out there to take a look at it. Really!! I work 80 hours a week and live in the country. I dont have a week. When I asked where the service man was coming from, he was coming from another town. I asked if there was someone closer. She gave me another appliance stores phone number. They showed up 2 business days later, looked at my washer, verified the code along with the Model and Serial #s, telling me it was the control panel. I gave that information to them on a Friday, they showed up on a Tuesday. They knew what that code was and what it meant for that make and model washer, but there just had to be a service call in there. The part was ordered on that Tuesday... here it is the following Saturday and the part still isnt here. I do not understand what takes Whirlpool so long to ship the part. Do they not care that in this hustle bustle life we live in, we dont have time to wait for a part that may or may not show up. Ship it overnight. That is an option. Making the parts accessible to the service people in a timely manner would make great customer-service. Better yet, how about going back to the old-style washers. This high-efficiency non-sense is highly expensive.

March 18, 2018. I was called today to inform me that the right front burner on my new stove Model # WEG745H0FS0 (ordered in early September and not delivered until mid-October from Menards) was not operating properly. The flame was noisy and yellow. I inspected it and found that the front burner base was substantially damaged by heat. See photo (Whirlpool stove part damage1). On inspection of the other front burner base, I discovered early signs of the same problem. (Note changes on burner base on the left of the photo.)In this photo (Whirlpool stove part damage2.JPG), you can see the damage to the burner base and also see some changes on the 3 to 5 O’clock position on the burner base on the left of the photo. This stove is less than 6 months old. The fact that the burner parts can be melted indicate poor design and danger to the owner/operator of the stove. Further, the operators manual for the stove I bought does not include any information on the model I have. It has pictures of the range top similar to mine but the model number is completely different. In addition to this, the Aqua-Lift Technology for cleaning the oven is completely ineffective. This is noted in several other reviews of this equipment. The problem noted by the other review became obvious the very first day I tried to use this range. A 2 cup pot spilled all over the cooktop as soon as I put it on the grate.

Bought the Whirlpool Duet washing machine. It lasted around eight years. In the meantime I was replacing the rubber door seal cleaning out the pump constantly. The plastic pieces inside the drum all broke. Every few months I would get an error code. And During spin cycle it would literally shake my entire house. The problem with all the front loaders is the construction of the drum and the drum bracket. They are made of dissimilar materials. (Stainless and zinc) When you add soap to the water then the bracket becomes an anode and the drum becomes a cathode, which creates electrolysis which corrodes the bracket. When the bracket breaks your machine is totaled. I’m finished with every manufacture except Speed Queen. I bought a Top loader Speed Queen and I love it, it is built like a tank.

I have to say I am taking the time to write a review for my Whirlpool Cabrio Washing Machine since Ive never been this dissatisfied with a product. Every time I wash my brand new expensive black dress pants, I have resulting white marks all over! Im so upset! I washed one load three times with no soap at all just to remove the marks present! At this point, I will never buy another Whirlpool product. =(

Whirlpool Gold Freestanding Accu bake Duo FIRE HAZZARD - We bought our house August 2013 and we were SO happy to see the stainless steel appliances and we thought Whirlpool was a good brand that our grandparents stood behind for years (they obviously havent bought from them in 50+ years... times must have changed for the worse). Anyway, I got all moved in and was fixing supper and noticed how REALLY dark and greasy the oven was. I could barely see inside because the coating of grime was so thick that it dimmed the light by being so thick over the glass bulb cover. I immediately thought Wow... the past homeowners were nasty and lazy because they have this nice self-cleaning oven and dont even bother to clean it. I noticed it smelled slightly like it had a gas leak somewhere when it was preheating but it cooked the supper okay that night.Because it was hotter than a jungle in NC in the summer heat of August, I decided to wait until winter to use the self-clean... thought it would warm the house as it got rid of the gunk, right? I kept using the dark coated oven about a total of 25 times and always noticed the faint gas smell at first when it would preheat. I thought maybe it was SO dirty that the oven seal wasnt working right and since it was now November, I figured I should just run the self clean cycle and maybe it would make it run properly as it was REALLY dirty and the igniter or something may actually be clogged. I figured it would probably stink a little at first when it started the cleaning cycle because of the excess build up but it needed cleaning so bad that I cleaned it... The smoke alarms started to go off, we just disconnected them for peace and quiet... Our throats and eyes were burning and it smelled more like plastic burning... FOR HOURS it was horrible! The walls and the Terracotta tile floor were flaming hot!!! The next morning the house actually smelled like it had caught on fire and it stayed that way for weeks!The oven was very clean inside after the cleaning BUT the oven is now totally useless! It will not stay lit. I have never been able to use it again as it will not come up to temperature... just clicks over and over and hisses trying to light. I tried again today and it started LOUDLY hissing like a big open gas pipe was on in there and I got scared and cut it off. THANK GOD it went off!I have been reading similar complaints about Whirlpool Gold ovens for a couple hours now and I am truly scared to use this oven now. After reading the comments of the hundreds of dollars it will take to get it to bake again and how most people STILL had the same reoccurring issues and NO help from Whirlpool... Well I decided to share my experience in hopes that if anyone else is reading this... and I am sorry to say... Well... you are not imagining the problem either. We never read these blogs like this BEFORE we buy or use our appliances, only AFTER something scares the crap out of you and you look for a recall. If I could afford to sue Whirlpool for a replacement then I would. I wish everyone could afford to sue Whirlpool for their unresolved issues that have cost them unnecessary expenses due to the customer loyalty we have had for Whirlpool as we used to be taught You get what you pay for and Do not go with an off brand because those companies go out of business when you need them to repair or service stuff. Am I the only one that was taught this? Times are very hard now and the economy is getting worse and now we have to be screwed by big companies like Whirlpool getting rich off of hardworking people and they do not care enough o help pay for the poor workmanship issues they are making. Shame on you, Whirlpool. I am taking the rest of the day to read reviews on a replacement stove so I can get this ticking time-bomb out of my new home. I too have read enough about the same oven that others have had worse memories than I did. I will not waste anymore of our hard-earned money on Whirlpool ovens. You have to decide what is good for you....