GE Stainless Steel Profile Dishwasher - My dishwasher is about 5 years old. Two years ago, we noticed that the gaskets, both around the tub and on the bottom of the door, were becoming gummy and rippling. We were hoping to make it another couple of years before buying a new dishwasher, but a couple of week ago, the top arm fell off because the gasket was so degraded. We ordered the appropriate parts and were only able to replace the top-arm gasket and the tub gasket. We had to call an authorized GE repairman, specifically RC Appliance in Sparks, NV. When he tried to get the gasket out, his hands turned black from the rubber. After about an hour of trying to get the new gasket installed, he had to use his pliers to crimp the gasket in place leaving large dents along the bottom edge of the door. He said the factory had crimped the old gasket in place at the factory from the other side. I am extremely unhappy about the workmanship and the fact that the gaskets did not last a reasonable time. I dont want to seek an attorney, but would rather GE contact me to discuss what must be done.

I bought a whole line of GE Monogram appliances for our home in late 2005. These appliances are not even seven years old and I have had the side-by-side fridge repaired several times with no true fix to the problem. They charged me to repair the tank in the fridge that the water line leads out from and into the freezer door. Another repair man said that was never the problem and that the seal on the freezer door is broken from inside the door (a common problem) and freezes up the water line, so no filtered water comes out. They wanted to charge me $800 for a new door with no guarantee that it won’t happen again!My cook-top downdraft has shorted out three times because of a faulty design issue. Water and moisture can get up under the switch, which shorts it out. There were three different repairs for the same issue. Last time the same service man repaired the problem and he was so careless. He got silicone all over the granite counters and switch, which he didnt check before leaving! I called him back to my house before he even got out of the neighborhood. Ultimately, he admitted he screwed up and ordered me yet another switch. Now, just today, my Monogram dishwasher started billowing black smoke. I called GE to find that the unit has been recalled for electrical shock and fires. They said I could have it repaired (if the service man deems it repairable) or it’s $400 towards a new unit. Is this company for real? How many consumers do they have to lose before they wake up? If I werent home my house could have burnt to the ground or, worse, one of our kids or us could have been severely hurt or worse. Do they not realize the liability they would have at that point if the worst would have happened? And they have two phone numbers and my address on file. Why on earth would they not contact me to tell me of the recall? Are they holding their breath and crossing their fingers that nothing too bad will happen? I have a Whirlpool fridge/freezer that is 18 years old and in my garage; nevertheless, it has never given me an ounce of trouble. I will never buy another GE appliance again and will tell anyone I know the same, including the several new home builders I work with. There are too many other companies out there that will back up their quality products. I have called into GE on my latest problems. And if I dont get satisfaction (i.e., brand new units), I have no issues contacting the attorney general. There are forms online that can be downloaded so a formal complaint can be filed. I urge anyone else to do the same.

My 3 year old $600 GE micro caught on fire with nothing it. I set the timer on my top of the line GE microwave for a reminder. Nothing in the micro, cooking nothing! When I came back it was on fire! Melted the inside. If I would not of been there it would of burnt my house down! The only way to shut it off and put out the fire was to turn off the power to it. The next day as soon as I turned the power on my GE microwave started on fire again!!! This must be happing to many people and needs to be addressed by GE! This company needs to be held accountable for burning houses down!

I bought a JVM3670SK05 a little under two years ago. It is an above the cooktop vent-a-hood microwave. I believed I was buying a quality unit. Now everything is working, but there’s no heat! Even the cheap units from Walmart work longer than this expensive piece of crap! Now I either have to spend enough to buy a new hood for cooktop and new microwave or pay the same price and buy parts in hope that they will not go out again. Not really feeling lucky with the GE product.

My husband and I bought my mom a new microwave, an expensive GE model. It was great, but then all of a sudden we heard a bang pop and the microwave was burnt. Now its seriously peeling on the top bottom and sides. I HAVE NEVER SEEN THIS BEFORE EVER!

I bought a GE microwave two years ago. The microwave stopped working and has a message that the keyboard shorted. I called GE and they are charging me $90 to send a technician, plus parts and labor. I paid $250 plus installation for the microwave. I will never buy GE products in my life. Do not recommend to anyone.

We remodeled our kitchen and bought full line of GE café appliances which we have not been happy. Microwave screen cracked in the first three months; refrigerator is at max cooling but still does not cool or freeze enough; dishwasher has never cleaned well and marks my dishes with gray streaks and its control panel quit working and had to be replaced. They said that it was my soap, water etc., even though it never happened with previous dishwasher. All this in the first ten months of ownership of a couple with no family at home. Servicemen were nice and polite but their products are crummy. Dont buy them.

I recently purchased an Adora dishwasher from Home Depot. The price was enough to suggest that it should be a good dishwasher, but its the worst dishwasher Ive ever owned. It does not clean dishes and it takes two hours to do it.

I have had a few cheap microwaves but at this point in my life I wanted to buy a good quality microwave that would last. Well I bought a 200 dollar GE microwave in February. 3 months later it went out on me. I did hard and soft reset numerous times with no success. They offered me a discounted check to replace it and it would take 4-6s weeks to receive. Instead we returned to place of purchase and they gave us a floor model to replace it. All was well for 2 months when lo and behold this one started doing the same thing. No amount of resetting would make it run. It went out cooking corn on the cob. Why is this so hard to keep running? Their response this time was a goodwill rebate certificate to purchase only a GE microwave. Why in heavens name would I want another one? It only lasts a couple of months and who is to say the 3rd replacement will not be the same.

It popped and acted as if something that should not be microwave several times, although the contents were fine. Finally it caught on fire. I had it for a year and used it mainly to warm up my coffee. Never popped popcorn or used in meal. I will not buy GE again. I work too hard for my money.

This is my third microwave since 7/13. The first day I used it did not turn off, the fan and light stayed on so I returned it to H&R Greg drove to their warehouse and bought a new one. Six months later, doing the same thing, would start up by itself, very dangerous and not shut off. Had three different repairs on it three days from work!!! They came out a week ago, installed a brand new one, same model. Next day, doing same thing, started by itself. Now have to plug and unplug it for use. Now they are sending out a service call to look at it for what I told them whats wrong same as the others. The only good thing about the people at the service center have been great and the service people too. I just want this fixed. Model # jvm1750dp2WW Spacesaver.

I purchased this Spacemaker Microwave Oven (HVM1540LP1CS) from Home Depot in Aug. 2010 along with a GE electric range (JB400SPSS). I wanted the appliances to match and they look very nice in our kitchen. Four days ago the microwave stopped working, that is, it comes on and appears to be working but does not heat the food placed in it. After looking on the internet, I found that other consumers have had the same problem and it appears the megatron is the culprit. The microwave was manufactured in March 2010 in Malaysia so it was not an older model that has been sitting in a warehouse somewhere.The cost to repair the microwave will be about $125 which is about half of what I paid for it. I will not repair this microwave just to have it fail in 20 months, General Electric should be ashamed of themselves for selling foreign-made products that do not last more than 2 years. My only hope is that the electric range we purchased does not follow the same course as the microwave, consumers should be aware of these problems before they purchase General Electric products.

We purchased a Profile Dishwasher, Stove, Oven and Microwave. So far weve had problems with all products especially the dishwasher. The bottom of the dishwasher is filled with water, the door has water running down the front and all dishes have to be dried. I have talked to GE and I was told the new models do not have a drying system as in the past due to EPA. I feel like we have spent thousands of dollars for items that are trash. Had I known I would be drying dishes I would never bought GE products. I would trade this GE for a SEARS in a minute but too late. Ill keep calling GE office, maybe a miracle will occur. Ive tried all the tricks in the handbook... doesnt work.

I have had it with GE! Only 18 months after install, my beautiful, stainless, three-rack, GE, top-dollar dishwasher will not turn on. Repair attempts have been futile. Tech said not to expect more than seven years service out of new appliances. Were tossing this junk and buying CHEAP replacements going forward since all we have to choose from is throw away products. OEMs like GE should realize they are shooting themselves in the foot with their planned obsolescence business plan.

We bought our home 4 years ago. After 2 years and 8 months the bottom of the door cracked and a piece fell off, then the door wouldnt close. We were past the warranty so we bought a new one since it would be cheaper to replace it than repair it. We didnt complain because we thought it was put in incorrectly by the builder. The new one was installed correctly this time. After 1 year and 8 months the door is doing the same thing. I contacted GE and they said there is no manufacture defects. Because we didnt purchase the extra warranty it would cost us $90 to have someone come out and look at it. We only paid $179 for the microwave. It is a huge problem for us! We will not buy another GE product. Mostly because the customer service isnt willing to help at all. They just transfer you to different departments who all tell you the same thing. Very disappointed in GE.

Nothing happened...never has. It just wont wash dishes. I have to prewash every item that is put into this piece of garbage. I bought it new and have used it for 3 years. It remained in the box the first 5 years I owned it and it honestly did me as much good in the box as it has since we installed it. It makes a good rinser but wont even wash off a lemon seed left in the bottom of a glass. This is such a joke. I would never buy another GE product. The refrigerator I bought at the same time, a side-by-side, the entire front door froze solid within 2 years and we had to buy a new one. Your company stinks. This is a rip off of my money. Refrigerators and dishwashers are not cheap. Model GSDL122F02BB is the dishwasher.

Good dishwasher for the price. Racks are well designed except utensil basket takes up lot of room. Given forks and knife rack at top, basket is not needed. Dishwasher flies at night.

Purchased a GE 650 dishwasher which we quickly discovered has terrible racking for North American dishware. Also the control panel is overly complicated yet limited to use (always flashes settings even when not in use). Once you figure out how to load dishes into the very tight/ narrow tines they fall over and chip/break. When investigating the dishwashers by GE made in China/Taiwan etc all have same issue. The ones made in USA by GE have wider and longer tines. We have had MANY dishwashers over the 40 years and NEVER had one as bad as this.When calling GE customer service the senior rep was not willing to offer any customer satisfaction as nothing technically was wrong. At one point she stated we had made the purchase so live with it even though it was the wrong choice. We offered to pay for any cost difference, etc. When questioned about GEs interest in customer satisfaction she stated that was not a warranty issue. She was not concerned about a satisfied customer. With that, we will not be purchasing another GE product or its affiliates. What a waste of money.

First, as a new homeowner blessed with select builder-provided appliances, I never imagined I would be authoring this letter 4 months after closing on the new home. Your friggin’ microwave oven light mechanism truly sucks! I lost the two bulbs a week or so ago and purchased two more at the cost of approximately $10, even though a one-year warranty was stated. That was okay, as I was more interested in fixing the problem versus starting some long-range purchase interest. So, and this is the most aggravating aspect, I have the correct pins and life is ** good, and as I attempt to insert the first, the ** pin breaks off. Okay, so I reflect on the horrific engineering of the mechanism, and I softly” align the second of the two bulbs, and the ** pin breaks off again. ** is my predominant theme tonight. As well, believe me, I am going to inform Taylor-Morrison that their respective selection of your friggin’ lousy pieces of crap is corrupt and misguided. You suck, G.E.! I’m moving forward.

We have a GE SpaceMaker JVM 239BV 001 over the range microwave purchased about 10 years ago. Within one year of installation the handle snapped - just as numerous people here have stated. I went to our local replacement parts store and was shocked that it cost $30 for a new handle. The sales person said if I were you I would by the lifetime warranty for an extra $3 because you will be back, I sell lots of these.

There was a recall on my fairly new dishwasher. The heater was causing fires. The repairman came and said I had to remove my ceramic tiles in front of the dishwasher for him to pull it out. I called customer service and a Tina offered to reimburse me $200 to have someone remove the tiles and pull the dishwasher out. I paid a handyman $250 in cash to have it done, called GE and they sent a man to fix it. I called again for my $200 and explained their man fixed it. They now wanted a bill from my floor man. I sent the bill and they refused to pay because the bill did not say paid. I called and asked them how their repair person could have fixed it if the floor had not have the tile removed and the dishwasher pulled out for him. I said, Ask your repair person to verify that the tile was removed. The answer was they couldnt ask him. I sent the bill again with a note saying paid in cash, a picture of the floor and a picture of me - a 74-year-old woman with a note saying it was impossible for me to have ripped up the ceramic tile and backer board myself. Again, I got a reply that the receipt that I sent was not acceptable and the case was closed.

The size of the dishwasher is good in diameter to fit my familys dishes well. I like that it has different settings for different washes. Since sometimes I only want to wash a few dishes it has a water save setting. It fits under my counter nicely which saves a lot of kitchen space.

Three years ago, we remodeled our kitchen and replaced all our appliances with GE Profile Stainless Steel appliances, stove, refrigerator, and dishwasher. Two months ago, the dishwasher, model PDWT580R10SS, stopped working. It was out of warranty, but the store where we purchased it said to call GE consumer service to see what they could do. They said that they would replace the parts for free if we paid for service. They said they would send a GE certified service tech to fix it. The two people they sent were dumb as a brick and after tearing apart the door, they decided that the controller board was bad and sent for a replacement. Two weeks later, they installed the new controller board and it still didnt work. They called GE and were walked through a troubleshooting guide and it was determined that the touchpad was bad. They ordered a touch pad and two weeks later, they arrived to install it and asked where the part was. According to them, it was sent to me and was at the post office, which it was not. They then asked to be paid for the three calls and I told them I do not pay for incompetence and would pay them when the appliance was fixed. Turns out, they gave GE the wrong address (their store) for the part and it was sent back. I called GE Consumer Service and talked to my rep who said she would send the part directly to me and that the service rep refused to work with me again and I should contact another service organization. The part came and it was not a touch pad, even though the packing list said touch pad. I called the GE rep, who is now a good friend and she said she would contact the store where we purchased the dishwasher and have them fix it as long as I paid for the parts. It is now two weeks since they arrived and diagnosed the problem. I just called the store and they said the part was backordered for another week. It will be close to three months before the dishwasher will be fixed if it can be. DO NOT, UNDER ANY CIRCUMSTANCES PURCHASE A GE APPLIANCE.

Bought a GE microwave and arranged to have it installed. Kept it in sealed box for 3 days until installer appointment. Opened box to find a crease (dent) in door. I phoned in to the GE warranty depot and they informed me that I only had 48 hours to report and as such was out of luck. They indicated that it is clearly stated in the Appliance Manual under the warranty section. Too bad that the Manual was in the sealed box. No warning on the outside of the box. On top of that the individual that I spoke to at the Warranty Depot was very rude. No more GE Appliances for me. Be forewarned.

My 2-year old microwave and range handle(s) have paint peeling issues. GE has a program to replace the microwave handle. They DO NOT have one a similar program for the range (same paint peeling issue on the range handles/rings). They offer a discount cost for the range handles. I am sending them pictures and another formal complaint.

I have a over the stove microwave. I went to pull out the filter to clean, and one came out no problem. The second one fell apart. I got online today to replace $38 plus $6 S&H for one!!! It was the first time I took it out. I called GE told them I thought it was B.S. They said, No problem, we will give you 15% off and free shipping. Only problem was they wanted $47. I have 3 GE appliances. When its time to replace I will NOT be buying GE.

2 year old GE ADORA dishwasher - I am so disturbed tonight after seeing what happened to the protection rubber that is on the exterior of my dishwasher. I decided to buy a new dishwasher because the bottom tray would not stop when pulled out at the correct stopping point. Today I got my new dishwasher installed and when the installers pulled the old one out I was shocked to see that the protectant that I would assume was placed to protect my house was melted all over my wall behind the dishwasher. WOW. Talk about a MAJOR fire hazard. Thank God my house didnt catch on fire because of this faulty equipment. Check out my pictures and you will see the pile of protectant that was under, on my wall, and behind the dishwasher once it was pulled out. Sincerely concerned.

Dishwasher Disaster SR# TD729818B M# CDT765SSF1SS - Please, Please, Please, help me to come up with a solution with the issues that have plagued me and my family since we purchased the dishwasher referenced below in the numerous e-mails and electronic correspondence! As I write this E-mail, the GE Assigned warranty repairman has the dishwasher in question torn apart and disassembled for the 3rd time in the last month and half (Please see included photos). A repair I was told was only going to be minutes to conduct has now lasted over 3 hours and caused me to miss a very important appointment. That time frame will go at least another hour if the repair is even possible? Not to mention that a dishwasher that has been used less than 25 times has once again been torn apart and reassembled. I dont care how well built they are, this in my mind affects their performance!The repairman from JK Appliance has spent at least 12 man hours of repair time on the dishwasher, made a half dozen calls to your tech support (check your records), and has never spent less than 4hrs here on a visit. Once again, I have to be here for those visits (time out of my day) plus the stress of watching a brand new $1600.00 dishwasher dismantled time after time! At what point does G.E. make a decision that the amount of money being spent to repair a defective machine is not worth it?? I have to believe that 12hrs of repair time plus an hour of travel time for three separate visits each way, has already added up to the price of a new/replacement dishwasher?The other two G.E. appliances (microwave/Gas Stove) purchased with our remodel last year have performed flawlessly and we are happy with them. However, the trouble with the dishwasher has soured us on ever considering G.E. again! I plan on sending this E-mail and attachments to every consumer/watchdog group (Consumer Affairs) that Im aware of and to the store (Lowes- Farmington N.M) that the appliance was purchased at. This is not meant to be a threat, Im just at my wits end as to how to get to the end of this long tortuous journey that a simple appliance has caused for me and my family. Yes, there are certainly more pressing problems in the world, but right now this is the one that is currently affecting my family and the happiness in our home!Please advise if there is another route that I need to go with this problem including any alternate points of contact (GEs Escalated Issues department). My phone number is ** and maybe a simple personal call of apology from someone at G.E. explaining what my alternatives are would be considered? Thanks for your time and consideration.

Ive been battling this dishwasher since it arrived 9 years-ago. It was a warranty replacement we were stuck with from GE. Plus, we paid $300. We could never get it to clean dishes, no matter how we loaded it or what we used, so we gave up and hand washed dishes for years. This year, I am committed to getting the dishwasher working because of hand eczema. I took it apart and cleaned the sprayer arms, filter & wiped it down completely. I also ran a dishwasher cleaner through it. I finally got it to clean dishes, but only if they are thoroughly rinsed first and on the Pots/Pans setting. After a month, it stopped cleaning my dishes again. I took apart the dishwasher again, and cleaned everything. Now, glasses on the upper rack in the back are not all getting clean. I never overload it. Im convinced that GE Dishwashers are just junk. Someday, Id love to find a dishwasher that actually works. :-( Frustrated!!!

I purchased a GE dishwasher on March 15th 2018... The first dishwasher I received on March 23rd was obviously broken. The dishwasher setting piece was completely broken off and the sides were dented and looked like it had been dropped. Ok. The delivery guys immediately called it in and reordered another one for me. A week later the second dishwasher came, it looked fine from the outside so I signed for it. Once I opened it I saw that the top rack was missing wheels and the second shelf wasnt even connected to the dishwasher. I called and a week later they came and got it and left a new one. I asked the delivery guys to unpackage it and look inside. Immediately the top arm cycle fell off and the HE symbol at the bottom popped out. They assured me that was normal... When the install guy arrived a week later he said he thought everything looked ok. He ran a cycle, then left. Before he was out of my driveway the cycle arm/water sprayer fell off and water sprayed everywhere... I brought the piece into Home Depot and they told me it was broken (duh) and they would order a new one. NO. This was going to be the fourth time I will be taking off work to deal with this dishwasher! GE is absolutely gone down. The products being produced are either being sabotaged by the employees from the Ohio plant, who are all losing their jobs because the plant is about to get shut down and is going to be moved to Mexico or GE is absolutely horrible at business, design and producing quality appliances.Regardless, I will NEVER purchase a GE product again and would never recommend to anyone to purchase a GE appliance! I am going to get a refund and insist compensation and inconvenience fees! I had to take off work 4 Times, had to cancel plumbers 3 times (still was charged). I lost money from my work, time from life and a month without a dishwasher. Also, a month with a broken one sitting in my living room because they wouldnt come get the 2nd and 3rd broken dishwashers until a I ordered another one and had that one delivered before they got the broke one(s) out of my house. I had broken dishwashers sitting in my living room for a month. Easter was quite embarrassing with an appliance next to the table to say the least. DO NOT PURCHASE GE APPLIANCES!!!

My GE microwave also has paint peeling off the top inside and bottom with rust as well. And cannot be repaired but not one person has said they were sorry or even owned up that it is a fault in paint. This is disgusting to think about this stuff falling into your food!!! This is not safe at all and 10% off new unit is not nearly enough considering they are up to $3000.00 now for microwave/oven unit.GE does not stand behind their products and it shows!!!!

We bought a microwave oven (CVM1790SS2SS, ZA301193K) for our new house some 4.5 yers ago. The flimsy, but very shiny, metal cover on the door handle split and the resulting sharp, but hidden, edge cut my finger. We covered it up with scotch tape, and ordered a replacement for the handle. We paid GE $102 (other folk sell it for $76, as we later discovered). There were no useable installation instructions. Our extremely competent handyman could not figure out how to do it and called GE for help at 800 636-2005. He was rudely dismissed and was told to look for instructions on Youtube! He spent 2 hours to install the replacement part. The screws that came with it, were not quite right. Ill never buy another GE appliance in my life. The Item was ordered by Ellen ** (It was shipped on 1/17/2017).

GE DE68 00307A microwave was bought in June of 2011. Last weekend, August 25, I was heating water and the microwave started smoking and then failed. The entire apartment was filled with chemical smelling smoke. I have a parrot and had to get her out immediately as this type of smoke is highly toxic. I had to keep her out all night long.

I bought a GE 1750 microwave in May 2011, which got caught on fire last March 2, 2012. Now, we have to go through all the hassles of having a repair tech come out and probably be without a microwave for months!

I just moved into a senior Community and the GE Dishwasher was already here. I moved from a condo that also came with a dishwasher, a GE, new. It was builder grade and I hated it. But I am really enjoying my GE in my apartment! This one cleans very well and is quiet. I like it a lot.

I contacted by phone GEs customer service department (800-386-1215) on 2 separate occasions. The most recent was on 2/18/13. About 4 1/2 years ago, when we purchased our new house, we bought all new GE appliances for our kitchen and laundry room. My biggest complaint is with our dishwasher. The top and bottom racks are rusting and most of the prongs have broken off as a result. This should not happen for an appliance that is only about 4 1/2 years old. Their response was that I could purchase both the top and bottom rack. Why would I purchase the same racks only to have it happen again? Clearly this is happening because they used a poor quality steel.There was a recall not too long ago on our dishwasher and the service tech who came out to fix the recall couldnt believe how badly the racks have rusted. I understand there is no warranty; however, you would think or hope that the racks would last a lot longer than 4 1/2 years. I am very disappointed in the quality and the lack of help regarding this matter.

My husband ran our 4-year old GE stainless steel dishwasher (PDW8980N00SS) at 9 pm, 2/4/13. At 11 pm, he emptied and put away the dishes. At midnight, we went to bed. At 4:50 am on 2/5/13, we were awakened by a burning smell and discovered the heating element of the dishwasher either turned back on or never turned off. We were unable to touch the granite counter, the front of the dishwasher, and both wooden cabinets on either side of the dishwasher were very warm. The spinning arms and other plastic parts were melted. The only way it could be turned off was to unplug it from the outlet in the cabinet. We were leaving for the airport at 7:30 am on 2/5/13, so needless to say, we would have lost our home if this occurred a couple of hours later. The Assurant tech said it was repairable and ordered a part, which would take at least a week. Assurant customer service had us call GE. When we stated we didnt want the faulty dishwasher repaired, but wanted a new dishwasher, the best the GE customer service rep could offer us was 38-40% off several new different Profile dishwashers. After reading page after page of bad reviews, most of which detail either one or multiple fires from different GE dishwashers, we dont even want another GE dishwasher in our home. We already needed the smart soap dispenser replaced, since it clogs periodically and doesnt wash dishes very well. We also have a countertop GE Profile microwave, and the turntable motor has gone out 3 times so far. Weve purchased the replacement motors ourselves since it isnt under Assurant insurance. Not sure what the resolution will be on the dishwasher, but wed be happy if GE would give us at least $500 toward a different brand dishwasher. I know well never ever buy another GE appliance after this. We wouldnt sleep at night or ever want to go out of the house without unplugging another GE dishwasher, so dont want one.

We bought our first new dish washer 2.5 months ago. It has never worked since we got it. Figured out it was the door. We have called SIX times to GE to have someone come fix it They told us that their systems were changed and that they would take care of this! No phone call back or anything. I finally had to called the service people my self. Whats the point on a warranty if your not going to help. I will never buy another product from GE again!! I am VERY disappointed in the service. If you say your going to take care of it and call me back, then take care of it.

My husband and I enjoyed our 1980s White GE Microwave and Stove/oven. But, after 15-20 years with the same appliances, we finally saved up for upgrades and purchased a new Stainless Steel (mid-range priced) GE Microwave and stove/Oven. I cannot begin to describe our disappointment. The Microwave is above our Stove/oven. Our old microwave had two powerful lights underneath it - one on each side. This microwave provides one small, weak light that does no good any time of day. Why would GE go from two great lights to one middle useless one? Also, the faint white numbers on the front keypad of the microwave are barely visible during the day - forget about seeing this when the light is not perfect. I foolishly assumed these numbers would be backlit on a black background. Onto the Stove/oven. The temperature is not accurate but that is something we can deal with. After the oven is pre-heated, the assigned temperature stays on the display pad - NOT the actual time. Who cares about the temperature you set the oven to - dont we all need to know when to check or take out our food? Our last oven always showed the time. We did not join the Stainless Steel bandwagon 10-15 years ago when others did - which we thought would be good for GE to get some kinks out. I Guess we should have waited 10 more. Proper lighting on your Microwave and The time on your stove/oven while cooking are not too much to ask for when we just dropped at least 2-thousand dollars!!!!!

This microwave is nearly 20 yrs old and is still working great. We replaced the handle but other than that it has been great. I would definitely recommend the GE brand as it has been very reliable. I give this product a great rating.

Worst experience ever. Bought the dishwasher in Jan 2014. The washer does not wash. Three different technicians have passed by, cant fix the machine. Awful customer service, routine answers, file not assigned, cant talk to a manager.

Installed by builder of home. Mid level SS model, very quiet. Does not dry dishes completely. LED lights on control panel remain on indicating cycle even when finished.

GE Profile GLD4408RBB: Bought this dishwasher at Home Depot 2010 for our FL condo. We visit there periodically, dont rent out. We have used this dishwasher probably 50 times since buying. It never wash dishes well, leaving residue and we do clean them first. Now it doesnt drain; seems like pump not working. Its only five years old and hardly used. Its not worth having a repairman for labor and cost of parts. Very disappointed with GE product and wont buy another one.

Dont buy one. I bought two last year. The first one completely died before the 60 days were up. I took it back to Sams club and bought another. The tag inside says it was made February 2011, so its only a year and a half old. Under the carousel, the paint is peeling big time. I wrote GE repeatedly, asking if it was still ok to use it. After ignoring me for quite some time, I got this reply. In the notice, they told me to get Sams club to replace the defective and apparently unusable product they are selling knowing it is defective. I love the part where you cant cook something with too much liquid in it. Who does that when they microwave?Heres what they said: Thank you for contacting GE regarding your microwaves and the paint peeling issue. I did some research on it and found that it a common issue among all brands. Excessive heating of un-covered liquids can create a high amount of condensation that the inside paint is not meant to withstand. Minor chips to the coating on the microwaves interior cavity will not affect the products performance. However, if the coating is actively flaking or peeling anywhere inside the oven cavity (including under the turntable), discontinue the use of the microwave and replace it. GE does not have an approved method of repair, and the microwave is not repairable. Please return to Sams club for an exchange, if you are still within the one year warranty. If Sams is refusing to accept the return, contact the Sams Club Support Team at 1-877-885-2787. GE will then reimburse Sams club.

Purchased a black stainless steel microwave model JVM7195BLTS. When we opened the box we realized the handle finish was stainless steel and not black stainless steel as the rest of the unit. The website picture clearly shows a matching black stainless steel finish on the handle. Store was unaware of any problems and reordered another one. They claimed the GE rep said they had a problem with the handles on these units but didnt tell the retailers.

It has been a remarkable machine: reliable and efficient! I have had my General Electric microwave since 2001. It has never given me one day of trouble. The size is perfect and the heating mechanism has been flawless.

Bought a new GE microwave cafe series in May 2014. Within one month the handle which was not stainless steel started to peel and cut my wifes hand. GE sent a replacement new door for the unit that did not close. Then he had to transplant the handle from the new door to the old door. A month later the unit failed. A new replacement unit took 2 months to replace. It has worked 3-4 weeks and has also now totally failed. Our experience with GE CAFE microwave and GE service process is poor to miserable. I would not recommend this product or their service to anyone.

GE Model PDW9280J10SS Fire - Many GE Profile dishwashers have been recalled during the same time frame as the model we purchased, but it is not listed as one of the recall models. Just as many other complaints, ours started to smoke out of the top of the front door and filled our house with smoke. Thank God we were there to shut it off. The next day I opened up the front door to see what had been burning and it had holes burnt in front and back of the main circuit box (for lack of better name), one burn mark right where the main wire harness plugs in and burnt right through it. This is the same description many others have written. There is a problem with all of these Profile dishwashers purchased between 2006 and 2009 (ours 2007). If we had not been home, who knows what would have happened?

I had a new house build and it came with all GE appliances. The dishwasher Model GDT530PSD255 was not drying the dishes and the run time could be as much as 3 hours. The service man was there with in week. He said the dishwasher was working properly. After running through the cycles he said its working just fine. I open the door and it was all wet and the silverware tray and the silverware was wet and some soap was still on the door. He said everybody complains about the same thing. High efficiency Dishwasher have long run cycles and most dont dry to well. The silverware trays hold water because the tray sides are flat (horizontal) and that holds about a half of cup of water. All they have to do is put them on a 45 degree angle and the water will run off. Apparently it worked well on paper and no one actually ran it through its cycle. Needless to say I hate this dishwasher and its almost at the point to do them by hand. A lot of time is spent drying off dishes and silverware.

I live in a condominium building with approximately 105 units. We all had the same GE microwave installed in our units approximately five years ago (contractor-installed). I sent out a mass email to all of the owners to ask if they were having the same problems I was having my microwave, which was the touch panel will not accept commands. I received approximately 15 complaints from various homeowners with the same complaint.When I called GE to tell them the problem I was having with my microwave, they told me a technician would have to come out and diagnose the problem. The service call would be $99.95, and at that time the technician would let me know what the problem was and tell me the charge for the replacement part and labor cost. I told GE Customer Service that there were many people in my condo building who were having the same problem and I wanted to know why each homeowner should have to pay the initial $99.95 service call fee? The response was, That is our policy. To placate me, GE customer service said they would charge me the initial fee but I would receive a 25% discount for parts and labor.In the meantime, two or three other homeowners made service call appointments for their microwave oven with GE. One homeowner was given a fee for parts and labor, which would have been only slightly less than buying a new microwave and another homeowner was not given a labor cost. In both cases, the homeowners did not go forth with their repairs, because buying a new microwave was more cost effective.I want Consumer Affairs to know GE grossly mishandled this malfunction issue amongst a group of homeowners who own the same microwave. Secondly, I realize the microwave ovens are five years old, but GE should have some record regarding failing parts along with the life cycle of this product. Lastly, I want GE to be held accountable for not telling consumers a repair cost for certain issues. There should be a cost per hour, not cost per broken item.I kept records of all correspondence amongst the homeowners of my condominium building, so I will be of great assistance if you need further help from me. Product malfunction is a GE Profile Spacemaker 2.0 Model # JVM2070SK02.

I just had a GE tech out to my house to look at a GE profile dishwasher that almost burned down last week. There was not a cover over the internal electronic control panel inside the dishwasher and that was causing the circuit board to short out. The dishwasher is only 2 1/2 years old. GE wants to charge us $200 for the repairs. But this should be something covered under warranty. Their solution is for us to pay half. I think we will go and begin to look for a new dishwasher and never purchase another GE appliance. If you are in the process of building a house and equipping your home with new appliances, I highly recommend you look for another line and another brand of appliances. I guess I need to check with an attorney to see if there are any open cases against GE for faulty electronic components in their appliances.

After one repair to my 9 year old microwave we decided to replace it. I am so sorry I did! The old microwave had a stainless steel kit and was made with quality. The replacement is a piece of junk! The outer kit is plastic and shows fingerprints like crazy as well as the microwave itself! Im always wiping it off. The flimsy door button is impossible to open without pushing it ten times in the right spot! The door doesnt close easily either! The front of the microwave is warped and wavy! I hate it! The quality of your microwaves has dropped to zero!

We renovated our kitchen with all new GE Profile appliances in 2017 before moving into our new house in 2018. Nov 1, 2018 our GE Profile stopped working and showed a leak message. We called GE who referred us to A&E Factory Service. The repairman arrived Nov 6 and proceeded to not be able to pulled the dishwasher out and tell me the list of things he wont do because of policy. Without inspecting the dishwasher but looking at his computer with the list of things that could be wrong, he said he ordered two parts and would return on Nov 23. Nov 23 came and no repairman. Calls were placed to GE Parts and Service who expressed their disappointment over the no show then proceeded to say that parts would not arrive before Nov 30 and that one of the parts was on back order. Once the parts came then another repair appt could be made. I will have been without a dishwasher for over a month with no alternative recourse. Service response and A&E Factory Service is less than poor.

GE GDF520PGDWW 24 white, full console dishwasher - Energy Star. I have had this dishwasher model since December 2014 and it has not drained consistently since the beginning either during the wash cycle or rinse cycle. GE has sent three different repair companies to replace the pump, the control panel, and ultimately the entire dishwasher, yet even the new dishwasher still does not drain consistently. Sometimes it drains and sometimes it doesnt. The GE-certified repairman was again here this morning and is again ordering a new pump. Counting the original pump, the previously replaced pump and the pump in the new unit, this would be the fourth pump. I tried to suggest the problem may not be the pump, but the repairman could not think of another possible issue. I do not recommend purchasing this dishwasher.

Has anyone experienced a plastic burning smell when the dishes are drying? My dishwasher is 3 years old and I wash on Light cycle which is suppose to be 45 minutes long but goes for 85 minutes. Company said to turn off circuit breaker and turn back on and it should be fine, it isnt. Last two times I used the dishwasher it wouldnt completely shut down so I had to do it manually and before I did this I could smell a plastic burning smell but there was nothing on the elements. I called for a service call but they were shut down for 4 days.

GE dishwasher GDT680SSH2SS - I don’t normally do product reviews... In this case, I am making an exception. This is without a doubt the very worst dishwasher I have EVER owned. I’m pleased with myself for buying the optional insurance when I bought the dishwasher from Home Depot. It has been repaired 6 times. It even had to have the main seal replaced. It flooded my kitchen and ruined my floor. My homeowners insurance sued GE. I think it worked fine for only 6 months...then it went downhill. It is extremely loud! It sounds like your dishes are being destroyed... No, I’m not exaggerating!I have NEVER had issues like this. I bought this GE as I really like the screen bottom so that large particles didn’t get caught up inside the pump etc... As I’m typing this, I have it set for Sani wash and the water isn’t hot at all, and it had standing clean water in the bottom when I opened it up this morning. I will also note, I rinse all my dishes before putting them in. I will never buy GE anything again.

I own a GE Model #JNM1731DM1CC that came with my condo, in March of 2008. After two weeks, the tray was spinning, and nothing was heating up. They came, and replaced something, and it worked again. It is now November of 2011, and the ** thing doesnt go off. When the timer stops, and you open the door, the table turns, and the microwave is on, letting rays come right out at you. I have to unplug it after every use, so that I dont expose myself to rays coming from the microwave. I spoke with several appliance repair shops, and they told me that it is probably the circuit board, and that to repair it would run at least $200. I am so disgusted with GE. I also have a stove that practically blew up, when the door shattered, after only having it for six months. They had to come and replace the whole glass front. I doubt very much, if they will help me, because it took at least 12 calls to get them to replace the glass door, with the glass all over the place, and inside the oven, four days before Easter dinner at my house.

We moved into our new manufactured home in May of 2013. That is the month our above range built-in GE microwave was installed. In October of 2013, one of my sons heated a frozen chicken cordon bleu serving for 3 minutes, 45 seconds, according to packaging directions. He said that some of the inside of his food was cool, so my other son put in his serving for four minutes, zero seconds. All of the packaging was removed and each serving was placed on a separate Corelle plate and covered with Glad microwave-safe plastic wrap. While heating the second serving, the microwave started on fire. Fortunately, my son extinguished the fire before it spread. The food did not combust. The fire seems to have started from the ceiling behind the fan. The entire inside of our microwave is clean except for the soot that billowed out from the center of the ceiling. When the service tech came, he scrubbed the soot off of the ceiling with some paper napkins (which he left inside of the unit) and said that the microwave was a total loss. He also said the fire was caused by misuse, because plastic wrap is not meant to be used in the microwave, therefore even though the fire happened within a year of purchase and installation, our warranty was void. I asked GE to get a second opinion and they agreed to send a third party servicer (A&E) who stood me up three times! I finally got to schedule a GE tech to come at the end of December and they sent the same guy who said the fire was our fault! He told me that he never said plastic wrap is not meant for the microwave, but that we are being dishonest because fires only start when the food is left in the microwave for too long. He accidentally let it slip that he is seeing the same problem with GE microwaves in a lot of new construction for student housing in Tallahassee. (We live 20 minutes south of there.) He attempted to recover GEs reputation afterward by saying that of course it was the students faults, too, for misusing the microwave units. Anyway, GE has graciously offered to sell us a new microwave at slight discount. Haha, no thank you!

GE Profile Dishwasher Model GLD4400N10WW - This was the second GE dishwasher I have purchased and it will be the last. When guests come to my home, they ask whats wrong with my dishwasher when helping me in the kitchen. The racks are bubbled and there is a burn mark by the heating element from overheating. The dishes have always been too hot to unload afterwards that you have to leave the door open for ten minutes before touching them, or you will burn your hands. I purchased this dishwasher from Lowes on 2/23/2008 for $368.88. I see that there is a recall on the dishwasher now, and it is only worth a repair. Quite frankly, my dishwasher is all ruined inside and it needs more than just a new heating element. It isnt worth it to me. It is very noisy and sounds awful when I use it. I will not be putting any money into replacement parts at this point, and I am very disappointed with my purchase. A dishwasher should last more than 3.5 years. My dishwasher should be replaced for free, not just get a new element. My husband is a licensed builder and he will not be using GE either, after this experience. I am enclosing a photo of the burns.

GE Dishwasher Model GLD7400R10BB - Remodeled my kitchen about 2 1/2 years ago and replaced all my appliances with GE appliances. I noticed that every now and then my dishwasher wasnt starting or running through a full cycle. I had called the GE repairman because my microwave was not heating up and asked him to take a look at my dishwasher as well. After hearing it was going to cost me $500.00 to fix my still under warranty microwave and the control board was no good and very expensive to replace because my one year warranty had past on my dishwasher, I will never invest in the money hog GE ever again! WARNING... DO NOT BUY GE!

After 6 month of leaking brand new dishwasher, 5 appointments of technicians that are lazy and lying on their reports, as well as have no clue what are they doing, with unreachable Case Manager and complete unprofessionalism. This is so far the worst experience in appliance purchase. DO NOT BUY GE APPLIANCES! DONT WASTE YOUR TIME & MONEY!

Does not clean well nor dry well even on the more powerful cycles. I rinse off all the food and if anything is accidentally missed, it just gets baked on. Very disappointing. Also much of the upper rack item remain very wet at the end of the cycle. Drying issues: I use the most powerful drying cycle option but contents remain wet at the end of the cycle, especially plastics and top rack utensils. Not just damp, but large drops of water remain. Cleaning issues: Even when I use the heavy cycle, unless I remove all traces of food from the contents, the food remains and worse, now baked on. This model has a sanitized cycle so basically I use this dishwasher to sanitize only rather than clean, dry and sanitize. Completely unacceptable.

We bought a GE dishwasher July of last year. In December it started to shut off some off minutes into the cycle. FOUR months this piece of junk has not been working. Three times someone has been here to say oh it should be working. They are sending someone out for a 4th time now. Should have already been replaced.

I never imagined that a microwave in my new home would be rendered useless after 2.5 years. Like many of you, my control panel stopped working and the floor of the oven was extremely hot to touch. Heres the weird part. You can hit the number for timed cook, but youd have to let it heat the entire time. If you open the door, you cannot restart it. You have to unplug it to reset. Of course, I called GE customer service, who gave me the same spiel about $80 service call, plus repair and parts. Thanks to your candid remarks, I will not be purchasing another GE appliance.

We purchased a GE JVM6175EFES microwave oven in 2014 and are now on our 4th unit. When cooking food, condensation forms and drips down the wall behind the microwave. GE replaced it with another, but it was a rebuilt unit which when operated caused sparks and smelled of something electronic burning inside. So another unit was ordered and delivered damaged. Now after a year, the 4th unit is once again causing condensation on the back wall. GE has no answer or explanation for this problem and really doesnt seem to care. This is just one of several problems weve had with GE appliances. We also had to go thru 3 refrigerators to get one that was not damaged from the factory. We will be trying to replace the microwave with a different model, but doubt if GE will work with us to get this resolved as their customer service has been no help at all. DO NOT BUY GE appliances.

I purchased a GE Profile dishwasher in June 2015. It was delivered dented.19 July it was replaced. The dishwasher worked for 3 months. Then it stopped working and the display panel had a LEAK DETECTED, DO NOT USE, notification. We contacted GE who could not find a GE repair technician to come and repair it in the entire BAY AREA. The dishwasher was bought at SEARS who refuses to take any responsibility.

Our washing machine has been with us for almost ten years and I really love the features which make it look modern and easy to dump in a load when we're running late for something. It has been having problems recently but it still runs okay, with only a few hiccups but for a little over ten years, that's pretty good!

My dishwasher is part of the recall due to fire hazards. Last week it began leaking. I found the leak which is a crack in the plastic basin right under the heating element. Is this connected? Dishwasher does a horrible job cleaning so I would never use the rebate to purchase a new one nor can I afford currently.

After heating some water in the microwave, I opened the door and removed the water. A few minutes later, I heard a noise and noticed the microwave was running and the control panel indicated it was off. I opened the door it turned off. Closed it and it was on. Smelled something burning electrical in nature. I had to kill the circuit breaker to turn it off. I opened the door and felt the inside of the microwave and it was extremely hot. I was concerned that it could result in a potential fire, I continually checked it until I felt it was cool.

Ahhhh me, here we go again! Its no wonder that the state of business in this country is not as solid as it could be. I purchased your GE dishwasher, Model #GDF540HSF2SS, Serial # ZA703816B, on 01/19/2014 from Lowes Home Centers, 3805 Northern Blvd., Rio Rancho, NM 87124. It was delivered and installed soon after. Soon after that, mid to late July, it began to flood our kitchen. A service call had to be made to replace the tub gaskets. Covered under initial 1 year warranty.Here it is the 5th of November, 2015 and now the unit does not function at all. A service diagnostics call performed today the 6th of November to ascertain its ailment to the tune of $89.00! (No, we didnt purchase the Extended Warranty. My belief has always been that the option to purchase an extended warranty is; 1) an opportunity for the company to make extra money on the sales of a product, and 2) an admission by the manufacturer that the product is probably not well made and will probably break down sometime in the near future!) I guess that future is here for this product! It almost lasted 2 YEARS!! Deplorable! The last dishwasher I had was almost 20 years old and the only service to it was to replace a water hose (which I did myself). Diagnostics proved that the electronic motherboard failed!In addition to the inconvenience and the $89.00, Id be willing to bet that the replacement part for this unit will cost 1/2 of the original purchase price of $599.00! AND I WAS CORRECT; the replacement board will cost $269.00 to replace (part and labor)!!! What a rip-off! I will never purchase another GE product as long as I live! And I will go online and register my opinion and complaint about this product with the Consumer Services Bureau and any place else that I can find to vent electronically!Recently the Sandoval Economic Alliance attempted to lure GE to establish their Headquarters here in New Mexico. For various reasons, we did not make GEs shortlist for consideration. I am thankful that we didnt make it! Why would our state want such a crappy company embarrassing our state with their crappy products? I will be sending a copy of this complaint to them as well.

The GE microwave that was installed in our new home (2018) stopped working in June 2020, after the nuclear reactor “blew up”. Which could have been a dangerous situation. I was told by Assurant Insurance Company that it was no longer covered by the 1 year insurance policy, and if I purchased a new policy for $241.00, they would repair it or replace it. After they discovered it was not repairable, they denied the ”replace it” part and reimbursed the money for the policy. GE agreed to sell me a new microwave at a discounted price, which I agreed to. The replacement microwave was delivered damaged, in October 2020. After many calls and waiting hours on hold, service came out and said it was “not repairable“. Again, phone calls to GE Customer Relations and reexplaining the problem, I was told they did not have a microwave in stock to replace it. However, after further searching, one was found, and would be delivered. On 10/23/20, I received a phone call from the freight company that the microwave was being delivered the following day, but they had the wrong address! it was a previous address. Where that address came from is a mystery as we never had GE appliances delivered to that address. The freight company was not authorized to change the address in the system, so another call to GE. I am still waiting for a new microwave! I can’t even begin to count the number of times I have called GE, waited on hold or call-back, waited for service, and been told I have the wrong case number. I have all new GE Profile appliances, all have had service for problems. I will NEVER buy another GE appliance. Their service department and Customer Relations department is disorganized and incompetent. GE appliance are not quality products.

No issues yet. But only had for 6 months so time will tell. Read a lot of negative reviews but none here. Bought in Nov ‘18 from Home Depot. Delivered and installed on time. Replaced 13 yr old GE appliances that were still working.

I have the GE Monogram series dishwasher. This machine has some great features. It lights up when the door is open. It is the quietest dishwasher I have ever owned. The only negative that I see is, it is slightly small on the inside.

When you use the vent fan it is very loud even in the low position. I would also like to see a brighter bulb under the microwave. I dont have much more to say except that the oven functions well otherwise.

Horrible experience. I wouldnt recommend GE appliances to anyone. My husband and I ordered our items on the day of closing on our new Home. Well the items were scheduled to arrive Aug 9, 2017. Every other Appliance arrived from Samsung, but my GE dishwasher was a no show. I received a phone call hours later stating they didnt know it was on Backorder and I wont receive it until Aug 11, 2017.I spoke with supervisor Krista because I didnt understand the lack of respect far as not knowing if the 11 was a good day or even so much as an apology! Until I expressed how upset I was! 2 hours later I received a automatic message stating the items it still on Backorder and now its not coming until Aug 17th! I spoke with Home Depot who apparently has nothing to do with the vendor handling and conducting business this way and now I have to go return the product & order a new product.I dont even want GE appliances AT ALL. After calling today being put on hold 30 mins still no supervisor came to the phone. Terrible Customer service and lack of communication of the vendor. Ill be sure to highly encourage my friends and family to not support this Brand! Feeling upset and totally let down. I know this cant be how such a popular brand conducts business.

GE model #pem31sm3ss microwave has paint peeling on the interior. GE says it is not safe to use, yet will not replace it. Purchased 08.2010. There are other consumers online with the same problem. There should be a health safety recall on these units. GE offers a $50.00 rebate on a new unit, a far cry from replacement cost.

Have used GE dishwashers before - were good. However GE no longer makes them, its just a name - now made by MABE (part of HAIER), Mexican with Chinese ownership, and this new one arrived with a factory fault - cracked tub which leaked immediately. Cracked tub seam and leak found immediately by service tech GEs site referred. Good news is the leak detector worked! Bad news - is we didnt install it right away (old one still worked and pandemic...) so it was a year before we got to it (was partly a gift). So - now MFR Mabe is giving us the run around and so far not doing anything about the faulty dishwasher they mfd and shipped through Home Depot. Dont be fooled as we were - GE is not actually GE anymore and the mfr HAIER/MABE are doing nothing to correct a factory mfg fault.

I know this commonplace complaint, like thousands before me, will head straight into the wind because the world just works in this way: technical support and repairs works as a profit center for a corporation. My GE Profile microwave abruptly failed out of warranty after years of use. The cause was due to a wire burning up inside that had not been loosely connected, said the GE technician, so this was an issue of inadequate quality--not bad enough to cause the microwave to fail quickly but enough to cause failure over time.After taking the microwave out of the built-in cabinet, it only took the technician about 5-8 seconds to find and diagnose the problem, several minutes to get the right part (a wire) from the truck, and a couple of minutes to fix it. The labor charge was $121 for about 7 minutes of repair work, to be liberal with time. (This charge is separate from the charge to come to our home and diagnose the problem.) This prorates to over $1,000/hour for a basic wiring change, which I think is exorbitant. I understand that the technician is a highly trained individual, but this is already reflected in the high labor rate.According to GE, the cost to replace the built-in microwave, which came with a matching stainless steel frame would be $550 if we wanted the new microwave to match the frame at least (but not necessarily the oven, stove, etc.). This is the kind of cost you dont think about when you buy a new home built with matching appliances--well, I didnt. Companies like GE can rationalize all they want about all the overhead associated with servicing a repair call. I can certainly grant them some leeway, but in the end, charging an extra 8 times more an already high labor rate given the time needed to fix the problem is simply price gouging a consumer who has no good recourse. (This is why I pretty much avoid repairing anything, except for my car. Its almost never worth it.)I recently had an experience with an experienced plumber charging an hourly rate of $150, prorated by and rounded up to half-hour increments of work, regardless of difficulty of work. Repairing an appliance should work the same way, and my GE bill would have been halved. Because of such profiteering, I will not consider purchasing a GE appliance in the future. I pray that this microwave doesnt break down again in the coming years due to some other problem. It would be a lot less expensive to just buy a non-matching portable microwave then for $100-$150 than to keep up appearances.To be fair, the woman who fielded my service call was courteous and empathetic. Because the microwave apparently had an electrical burning problem, she previously waived the diagnosis fee. Otherwise, my simple repair would have run several hundred dollars, more than the cost of the microwave. However, she was unwilling to reduce the labor charge, so based on how strongly I felt ripped off, I give GE a star rating overall.

Have owned, installed, and repaired many dishwashers throughout the years at various houses. This GE unit is by far worst dishwasher that I have ever had the displeasure to install and operate, and it replaces a Kitchen Aid unit that started a fire, see **. Specifically the GE unit had the control panel break off due to misalignment, requiring repair, the drain bulkhead fitting was poorly designed and caused a leak, requiring repair, the water solenoid valve failed in the 2nd year, and finally the door does not lock closed without significant care and attention to alignment and requires many attempts to lock closed for the start of cycle. This is the worst and I cant wait to pull it out and replace it.

I purchased a dishwasher and it doesnt clean all the dishes. They sent out a repairman on 4 different occasions (one came out twice) and each one gave a different reason why they think it wasnt working right (what we are doing wrong). Each time, we followed their directions and the machine still doesnt clean. A decision was made that they will not replace the dishwasher, but would offer us an extended warranty. I explained that an extended warranty is useless to me if the machine isnt working correctly now.

Sometimes there are dishwashing detergent (powder) left on the dishes. Nothing extra, very basic, it has regular or pot scrubber cycles, air dry or heat dry, a slot for dry rinse liquid, detergent slot, short wash cycle, upper rack, lower rack and flatware basket. Came with the house purchased 17+ years ago. White body with black upper control panel the entire width of the dishwasher. It is still in very good condition, but then I take care of everything, always rinse everything before placing them in the dishwasher. Never needed service yet.

I have purchased a GE microwave/convection oven 7 months ago. A month ago, the control panel broke down and it would not turn on. I called up customer service and a technician was sent after a week. They have diagnosed it and the motherboard needed to be replaced. The said part was ordered and I was told it would be delivered in 2-3 days and a service will be scheduled in a week. A week came and no parts showed up. I have called up customer advocate and they assured me the said part will be delivered in time for the service appointment.Unfortunately, when they came, the said parts have not been delivered and I was given the lame excuse of systems failure; the request has not gone through their system. So the technician assured me that he will put in an overnight request for the said parts and the oven could be fixed within the week. He even gave me his work and cell number for me to call if I have any inquiries. But he never picks up or even returns my calls. So another service appointment was scheduled and parts were delivered, only to find out that it was the wrong parts, supposedly for another customer and for a different microwave model.Its really frustrating when people keep on reassuring that they are going to get it done, but has done nothing but lip service. Its been over a month and my microwave is still a broken microwave. I have learned my lesson and will never again in my life time purchase a GE appliance. PS: I should have listened to the Home Depot guy that sold me this microwave.

Ive had a GE model #JKP68G microwave oven for the past 27 years!!! It has been absolutely fantastic!! I love GE products and how reliable they are. Theyre the best!

I like the design. The color works well in my kitchen and the oven works perfectly. It is just the right size and fits in the corner of my kitchen. I have no complaints.

I purchased the GE Cafe dishwasher in March 2010. Starting in January 2012, some of the keypad options stopped working. Then in April 2012, the keypad stopped working completely and I could no longer get it to turn on. I did call GE for repair. When the repair person was out to fix it, they said that this model has a design flaw. It was originally designed to sit 1 below the countertop so that the heat could release without shorting out the keypad. However, that would require a person to somehow raise their entire counter or fit the dishwasher below the floor somehow. GE was aware of the problem but decided to ignore the problem. That means that even though my keypad was replaced, the same problem will occur again and again no matter how many times the keypad is replaced. I paid over $1400 for this model, and the labor charges alone cost me $200 for the repair. I think it is absolutely despicable that such a large company has allowed a high-priced, defective product to go out into the market, knowing that a major malfunction will occur out of warranty in such a short period of time.

I moved into our house about 27 years ago, and have had to replace every single appliance except the microwave. The oven, fridge, washer, dryer, dishwasher—all replaced at least one time over. But this 90s GE microwave keeps humming along. I really should replace it just because it is this awful off-white color and everything else in our kitchen is part of a beautiful stainless steel/black/white scheme, but it is actually built right into a cabinet and I fear I will not be able to get another microwave in there. The only gripe I have about its performance is the fan comes on and roars full-blast anytime the stove or oven is on. It is so loud its difficult to talk over.

After writing my review I was in the process of ordering parts for my dishwasher. I had a representative of GE in the parts department connect me to a GE manager. He was very helpful and understanding of the situation and helped resolve the issue with my dishwasher. My issue was with a customer service representative in the recall center when I inquired about anyone else having issues with their dishwasher and if there was a recall on the machine I purchased. Since I did not have an extended warranty the person I was talking to was extremely rude and would not answer any questions or concerns I had with the machine. I was not pleased with the customer service reps attitude and her ability to deal with the public.

Negative 5 stars. I purchased a GE over the range microwave oven, JVM2052SN1SS, just over a year ago and had a service call to address a lack of exhaust about a month after my purchase. In summary, the tech said it would not function as a dedicated exhaust hood and nothing can be done. 14 months later, the key pad began malfunctioning. Also, the moisture sensor that the operation manual stated will automatically start the exhaust fan, never worked and every time we cook, moisture would build up between the glass on the microwave door.I called GE Consumer Relation today and they will not address this issue free of charge. I will not purchase another GE product because GE dont stand behind their products.

My microwave is only 5 years old. It is burned out electronically. I would never buy another GE product. My GE Profile stove needs a $300 repair after 4 years.

My GE microwave oven turns on by itself. The GE microwave oven model number: JVM1540DN1WW. The serial number is: RS903539B. My GE microwave oven turns on by itself usually as if the one minute express button was pressed in. This has been occurring for about 2 years and has been doing this normally when the air conditioner is not turned on. It appears this is a humidity issue. All summer it has been working fine. As the weather has started to be lower and we turned off the air conditioner, the problem has come back. When the temperature rises and we put the AC on again the unit will work fine. We live in Florida and it can be humid outside but with the AC turned on the humidity is lower and the microwave will work fine.

GE states they do not repair microwave ovens under warranty. Instead, they offer to reimburse you at MSRP for repurchasing the unit if you will show evidence you have ruined the units operational function. The interior bulb burned out in my unit, I disabled the unit, sent in pictures and receipt. They sent a coupon for about $30.00 less than MSRP and lied about the conditions of reimbursement. Brendia, the agent I spoke with, broke off email contact when I stated the unit was no longer available from the sellers on the GE seller list (including the seller I originally purchased from), and that the unit was only available at MSRP from the online sellers I could find. My microwave is inoperable and GE has not responded or offered to increase reimbursement to MSRP. I have not located a chain of command to whom I can report Brendias dishonest management of my case.

I purchased a GE Spacemaker Microwave model JVM 1750SP1SS from Best Buy in October of 2011. Just a few months after having the microwave, the handle came off. I called GE and they sent a technician and fixed it but it left scratches on the stainless steel. In addition, we have had problems with the turntable. Finally on March of 2013, the keypad went out. This of course is past the one-year warranty. I called GE and they told me that they could schedule a service call for $89.95 plus parts and labor. I told them that I could buy another microwave from another company for less than that would probably cost. This microwave was made in Malaysia. I would not recommend any GE appliances that are not made in the US.

In 2008, after waiting 30 years, we remodeled our kitchen using both a GE Range & GE OTR Microwave, model # JVM1850. Last week, it started making a loud noise when started and wont heat. From reading online it sounds like the magnetron went. Everything else, fan, turntable, lights inside and outside work, but wont heat. I called in for service to find that it would cost $89.95 to have them come out to diagnose it. Also read that a magnatron is between $150 - $200, and used to be warranted for 5 yrs. New GE microwaves only carry a 1 year total warranty. So they know they are supplying junk to us. Had to just bite the bullet and replace it. People cant afford for appliances to only last this long, at the price they are charging. I am not only upset at having to spend another $450 only 6 1/2 years later to replace a microwave that was lightly used, but GE has chosen to change the look as well, so it no longer will match the range it sits above. When I was remodeling, I read so much about matching appliances... not matched anymore. Totally disgusted.

Ive had a GE Dishwasher for over 6 years and it works great. The issue is every 2 years or so, the plastic over the metal rods that make up the plate racks wear away and rust the underlying metal. The first time GE charged me about 200.00 for the racks, where the dishwasher only cost 250.00. The second time they replaced for free and now this third time, GE is being absolutely absurd not replacing these racks. My concern for mine is the health issues arising from having rusted parts in the washer. I believe this to be a manufacturers defect and could be happening in 1000s of these dishwashers. Metal should not go into water!!! GE should gladly replace my racks but theyre giving me a major problem, like take our offer or dont bother us. Please see the attached pictures and hopefully this doesnt happen to your dishwashers.

I loaded and ran the GE Profile dishwasher in the evening. Later that evening, putrid odor of undetermined origin was noted in the house. I searched throughout house to find the cause, but it was not located. The next morning, the dishwasher was found to be extremely hot on the outer surface (door) and countertop. The heated dry light was on along with the start button, which would not reset or turn off. The unit had to be disconnected by turning the electrical breaker off. All contents were either melted or had a strange brown film, along with broken tines and melted silverware rack in the dishwasher. Even the water dispenser in the bottom of the dishwasher was melted or broken. A GE service representative was called and his report stated: Unit was left on for too long and heat caused excessive damage to the product. Due to excessive damage, unit is non-repairable. He shared with me he had never seen this much damage done to a dishwasher. I spoke to GE consumer advocates twice and their solution is to provide me a discounted price on a new appliance and the email address for formal complaints. When I inquired about if there had been resolution to the cause of this problem because I wanted to make a formal complaint, I was told there is not a safety issue with the heating unit. I then spoke to a GE resource person in recall and she shared with me that it is a known issue of overheating and destroying contents, but it has not caused a fire. Igniting a fire is a justification for a recall - can we not be proactive? This department is working with me and ensured that in newer models this potential hazard does not exist. But other consumers who have purchased in this model (PDW9280N20SS) should be aware of the potential fire hazard. Everything was very hot inside and out. Consequences: the 3-year-old dishwasher (that I use about once per week) was totally ruined and I inhaled potentially toxic fumes for over 8 hours.

GE continually shows us why they are failing as a company. In just this last year I have replaced a less than 5 year old GE microwave, three separates parts to my GE monogram refrigerator, and now this one and a half year old dishwasher. The only appliance that GE makes that hasnt broken is the stove/oven that is over 10 years old and shows no signs of weakening.I purchased the upgraded stainless steel model that contained all the bells and whistles. It lasted 1 year and 3 months before the entire control panel stopped working. We utilized the dishwasher about once a week or once every two weeks in a two person household. Hardly a rough environment for a 700$ appliance. The repair costs was quoted for 99$ just to have GE look at it. The control panel was 140$, plus additional labor. This amounts to over 280$ to repair a year old product. I advise buying LG or Bosch.

I remodeled my house 5 years ago and went with the GE Profile appliances in my kitchen. Last week I had run the dish washer cycle and noticed the soap had not dissolved and the dishes didnt seem to be clean so I ran the cycle again. I started it at about 8 pm and we went to bed not thinking any more about it. About 1 am I awoke to a horrible plastic burning smell. I checked through the whole house and could not find where it was coming from until I entered the kitchen. As I entered the room my eyes started streaming from the burn. I opened the dishwasher and smoke starting bellowing out of it. Not just smoke but a toxic smoke filled the room. The inside of the dishwasher was so hot and everything plastic inside was melted. The bottom drawer and parts of the dishwasher were also melted. The silverware tray full of silverware was all melted together. This all occurred in a matter of 5 hours. Had I not woke up when I did, who knows if we would have woke up.The house was full of toxic smoke that did not trigger the smoke detectors. We just went ahead and purchased a new dishwasher and had it installed yesterday. This morning my husband decided to do a little research on this product and found there was a recall last year. I contacted GE and found that our model was not part of the recall because it has a stainless steel interior, only the plastic interiors are part of the recall. I also found out that had we called them and had them send out a certified GE technician look at it, they would replace it. Too late it has already been replaced and sent to the recycle center. I did take pictures and have record of the model and serial number which doesnt matter. I just want to get it out there that this product is also dangerous and a fire hazard. This product could have easily caused a fire in my home. I also wish I would have done more research before we replaced it. Our new dishwasher is a GE Profile...

Installed 07/06/2015 While I was asleep on 12/09/18 the oven appeared to start microwaving an empty oven on its own. When I came down 5 hours later the microwave had no power. I opened door and turntable had melted and glass had exploded. The ring under it was burnt and melted in one location. Top of cabinet on right side was hot. Then the internal circuit breaker restored itself and started some recovery process making odd noises sounded like the magnetron was trying to run since the top was getting hotter, after a minute the internal circuit breaker shut it down again. I then unplugged it. It appeared the magnetron started heating on its own and turntable did not rotate. All of the heat was concentrated at 12:00 edge of glass turntable. It also burnt the metal floor under that spot.

I have had the GE Profile for approximately 8 years with no Issues. I learn something new it will do every now and then I had no idea was possible. I stillHave not conquered the convection baking and that is my fault. I need to use it more often since it wouldn’t heat up kitchen like the range does especially these hot summer days in Texas.

When the handle on my expensive replacement (GE Profile for GE Profile) microwave/convection oven peeled, we called our retailer (PC Richards is really good about service). A new door showed up and it, too, has a plastic handle. The difference is, this time its solid grey plastic as opposed to white plastic with silver paint. Seems to me that an expensive SS appliance should have an SS handle. Too heavy? Just use a tube of SS - not solid. Too hot if above burners? Didnt my last GE Profile micro/convection have a SS handle? I spoke with customer relations. The person was well trained not to say anything that might suggest she agreed with me. Since the issue is cosmetic and not functional, I have to consider the issue dealt with now that the door has been replaced. I told them I will do my best to publicize this issue and that I will never again purchase a GE appliance. I also called CEO Jeff Immelts office in Connecticut. I made it clear that my dissatisfaction has cost them a long time, loyal customer and that I would spread the word. I would appreciate if anyone agrees with GE that a SS handle would be too hot over stove burners.