I purchased a Dacor Renaissance range for our new home. What a waste of money. Though I have not had any major problems with the performance of the range yet, besides uneven baking, the design is not user-friendly. To begin with, the gas burners share a grate. So when cleaning, you have to remove the whole grate on one side. The controls for the burners & griddle are very hard to see & I have to bend over to see which burner Im turning on. The oven racks are a joke. The two glide racks are very bulky with sharp edges. It is difficult to change the heights or to remove them for cleaning purposes. Though there are three racks included, it is impossible to bake with all three in the oven.I have a GE Monogram that I had purchased two years ago for another home, and I love it The Renaissance & Monogram are similar in price, but I unfortunately, listened to the sales person & let them talk me into the Renaissance. I realized my mistake in buying a Dacor immediately & contacted the appliance store. Even though the Renaissance had not been used, they would only give me a token amount of money towards trading it in for a Monogram. So, I am stuck with a range that causes me to swear under my breath every time I use it. Dacor could learn a lot from GE.

I have a Dacor cooktop, single wall oven, warming drawer, and dishwasher that I installed in my kitchen in 1992. That is 20 years ago. I have never had a problem or needed a repair on any of the appliances. They have worked perfectly. I hate reading about all the problems people are having with their Dacor appliances as I am about to do a major kitchen remodel and plan to go with Dacor again.

I would never buy another Dacor product. The microwave totally crashed and now the oven will not heat. I have had contact in the past regarding repairs and they are outrageous. I plan to replace both items rather than paying unreasonable costs. Very unhappy.

We installed 2 Dacor wall ovens, a 5-burner cooktop, and a downdraft fan in 2000. The convection ovens bake perfectly and have performed without fail. After 7 to 8 years of daily use, we did have to replace the door hinge on the oven I use most often. We are in a rural area so the repairs are accomplished through Sears. The replacement parts arrived in a timely manner and the oven has worked perfectly since. The cooktop is easy to clean and the heat is even. The downdraft fan is effective and easy to clean. I would be confident to recommend Dacor products.

We purchased our home brand new in August 2006. The house was built and the appliances installed (but never used) in 2003. One of the things that sold us on the house was the kitchen being comprised of all high-end Dacor appliances (double convection oven, cooktop, dishwasher, and built-in microwave). Our excitement quickly turned to frustration. The first problems began with the dishwasher, which after several attempts at repair (circuit board) was begrudgingly replaced by Dacor, with “begrudgingly” being the key word. I have always found Dacor customer service to be rude and dismissive - with the only way that I ever received a satisfactory outcome, being via threats of contacting the BBB and Missouri Attorney General.About a year after receiving the replacement dishwasher, the internal racks began rusting badly. Once again, I called customer service who originally wanted to sell me new racks at a discount. Only after another persistent round of explaining that high-end dishwasher racks should be made from a material that doesnt rust, complaining and threatening, did I receive new racks free of charge. I was also informed that they had changed rack manufacturers and that would eliminate the rusting problem. Wrong. It has now been another couple of years, and the new racks are rusted worse than the previous ones. That is just the dishwasher.Our Dacor microwave display began slowly losing its LED display about 2 years ago. Lately, the microwave interior lining is beginning to disintegrate and rust through. One of the burners on our gas cooktop makes a constant popping noise when lit. The top half of our double convection oven no longer heats beyond 250 degrees. I realize that our appliances are now significantly beyond their warranty period, so I am no longer even attempting a resolution through Dacor. I will most likely ride these appliances into their graves and replace them with another brand. I am writing this mainly to alert others about my experiences with what I believe to be Dacors total lack of quality at a premium price. In my opinion, Dacor is all style and no substance.

The Discovery Model 30 electric wall oven - After 6 years, the oven failed. The fan motor went out and at the same time, we were advised by a very reputable appliance repair recommended by Dacor that we need to also replace the computer or brain. Total cost of repair: $1150 with a warranty of one year.

We moved into our newly built home in April 2012. I purchased the Dacor 30" microwave drawer to complement a 30" electric oven that is installed just above the microwave. I am very happy with my purchase, it is stylish and works well. The drawer is spacious, I can fit multiple food items in it and they all cook evenly. We use it daily and couldn't be happier with it. If I ever move, I will purchase this microwave drawer again.

We acquired a $7,500 Dacor refrigerator when we bought a house this year. The fridge was only 5 years old. First of all it made horrendous noise when operating. Secondly the ice maker didnt work. Thirdly the freezer cooling unit died last week. How can a $7,500 refrigerator be designed so badly? I found out through Dacors authorized service company that it was quite likely the freezer could be fixed with a $400 part and some $250 in labor. The technician hinted that this problem was quite common with Dacor refrigerators. I contacted Dacor and suggested that their Internet reviews were terrible and they should help defray the costs of their premature failed unit. I was thinking that for a 5 year old product they should reimburse 50-75% of the total cost to repair. They said they would give me a 25% discount on the retail value of the parts only. In other words - I would be on the hook for at least $600 of the estimated $700 fix. This was a slap in the face. They dont seem to realize that their companys future business is only built on satisfied customers. I cant believe such expensive equipment can be so poorly designed and supported. Mercedes Benz... they are not. Lest anyone think that I am a frothing upset complaining consumer - I will tell you that I am currently retired, and formerly CEO of a $200 million public software company. I know something about building a business and I know something about focusing on customer satisfaction. I would urge anyone reading this review to stay away from all Dacor products. The Company has shown itself to be undeserving of any American consumers business!

Our 30in Dacor double ovens are approximately 12 years old. I feel they operate adequately. However, not better than our much lower end appliances we previously owned. My main complaint is the self cleaning function. My old ovens self cleaning worked much better! With our Dacor ovens one must take out the racks and clean them by hand. This is very difficult and time consuming. I used the 3 hr option to clean my oven that was moderately dirty, mainly from cooking a prime rib over the holidays. After the 3 hr cleaning the oven was still very dirty with splatters and grease. Im now cleaning my oven again with a second 3 hr cleaning cycle. I know at the end of this second cycle I will need to do a lot more cleaning by hand! I hope Dacor has improved their inadequate self cleaning feature. If it hasnt been improved, I really cant recommend Dacor ovens.

I bought a 30 Dacor Double Oven (EO230SCH), 36 cooktop, warming drawer and matching convection microwave. Well over $10k. The microwave has been replaced as it died early within the first year while cooking popcorn - nearly started a fire in the kitchen... However the cooktop igniter died at 4 years and now the wall oven is on its third control board in years 3, 4 and 5. Nothing is under warranty and they want nothing to do with me now. The replacement oven controls cost ~$400 each plus installation. So after all this expense, I have invested $1,200 more in replacement parts and the cooktop needs an aim & flame to light. Total crap. Im going to replace all of this and will never go back to Dacor. I took the time to write this so that others will not waste their time with what I have to assume is the worst quality in the industry. Please dont waste your money.

I purchased a 30 Dacor dual fuel range and matching hood in 2004. I paid $4009 for the range and $948 for the hood. The range and hood have been nothing but problems. I wrote to Dacor in April 2009 detailing the problems with the range with service history dating back to 2006. Problems include overheating when cleaning which is a safety risk, replacement of cooling fan, ignitor assay, part # 92309 membrane, and replacement of relay board in 2007, 2009 and again December of 2011. I attempted to purchase a Dacor extended service agreement in January 2009 but was declined due to the ranges past history and its age. I recently found this site which indicates that other consumers have had similar problems with Dacor products. Dacor has lost me as a customer as I will never buy another Dacor product! I have been disappointed and frustrated with their lack of response and support. I finally purchased a GE service contract which has helped absorb some of the cost of ongoing repairs. The overhead lighting has long since gone out in the hood. I was told the hood needs to be disassembled to replace the lights. Dacor should step up and support its products. When most people put out $4000 for a range, they expect to get a quality product that will last 15-20 years. With Dacor, this has definitely not been the case!

I was a bit anxious when I purchased my Dacor range because I really didn’t know how it would perform. A year later and I couldn’t be happier. I love my Dacor 30” range. It has been one of the best purchases ever.

I rarely write reviews but when I found your site, I decided it was time to vent. I bought a 36 dual fuel, convection Epicure range in 1999. It was not a cheap oven and I was excited at the possibilities of having a 16,000 BTU broiler and large oven cavity to work with. Lets just say that excitement quickly wore off. Almost immediately after the range went out of warranty, the ignitors went bad and we also had to replace the control panel ($400 in repairs was a lot back then). After that, we continued to have ignitor problems and replaced them again. Finally, I just stopped doing it and lit them with my aim and flame. I never allow my children to cook on the stove because I am afraid they will be burned. Most recently, my broiler element, relay board and again more ignitor problems ($1,200 in repairs). Not to mention, the repairman had a terrible time trying to access all the areas and was at my house for 4 hours trying to do so. When the initial problems happened, I emailed, phoned, left message, etc. to no avail with customer service (I use that term loosely). This company is the worst. I have told everyone I know never to buy a Dacor anything. Next time, Ill buy a Wolf.

In 2008 I had the luxury of choosing kitchen appliances for our new home. I looked at them all and felt Dacor was the best choice. Choosing Dacor for our kitchen was the worst mistake I have made in kitchen appliances in any house in which I have lived (and there have been quite a few). The oven (48 dual fuel range) didnt work from day one. There was a problem with the temperature control. The oven would not shut off when it reached the desired temperature. Disappointing, but I told myself that sometimes things can go wrong and it should be an easy fix. Well, many service calls later and several re-wires of the unit, along with the installation of many new parts, the range still does not perform as well as the worst oven I have ever had.There is a tool that comes with the range that is used for taking the top off the unit to access the wires. My range was taken apart so many times that the tool wore out and had to be replaced. The front piece of the range no longer fits flush with the rest of the range. On one of our last service calls, I was told by the serviceman that Dacor said that under no circumstances would they consider replacement of my obviously faulty, beyond repair range. Eventually I got tired of repeated service calls. Sometimes servicemen would come out and say they didnt know how to fix it and leave. I would not expect such poor customer service from an entry level company. From a company touting themselves as a manufacturer of top of the line products, I would expect a greater desire to stand behind their products.The oven still does not work well. On convection bake, I must turn cookie sheets around or I will have doughy cookies on the same sheet as burned cookies. And forget using the convection setting to bake 2 sheets of cookies at once - it takes longer than baking them separately. I wish I could attach a picture! I also chose a Dacor microwave and refrigerator. One of the salesmen I spoke with about refrigerators said to make sure the unit we select did not have air transfer between the refrigerator and freezer, and the Dacor model did not do this. Well, when my 48 side-by-side arrived, it had the air transfer. I was disappointed but chose to live with it. Of greater concern to me is the noise the unit makes at times - sometimes loud enough I can hear it in other rooms of the house. I have not bothered to call for service. Im not interested in another fight to get Dacor to stand behind their poor quality overpriced products.At this point, I have no expectation of Dacor standing behind their products. I just want to share my experience with others who may be in the same situation I was - designing their dream kitchen - and save them the regret and continual disappointment in their Dacor products.

Purchased a Dacor DT0227B wall oven. The first oven arrived damaged; the control panel was completely off the unit. We ordered a replacement oven which arrived today. Upon turning on the power, error codes C76 and C77 appeared on the control panel display. The installers phoned your service people who instructed them to remove the front panel and look for a loose wire. When they removed the front panel, the entire control board was just hanging free, not secured in place with any screws (it appeared that this was an assembly error). They found a wire hanging, secured it in place, reattached the control panel and applied power. At this time the error codes were no longer displayed and they were able to set the time. When they attempted to start up an oven cycle to test the unit, the Start/Continue button on the membrane keypad was not responding. Another call to your service team determined that the control panel would need to be replaced. 2 ovens within 2 weeks arrived DEAD! The quality is beyond unacceptable. I sent an e-mail to the CEO of the company before I posted this. I received a response from a QA guy. Any manufacturing company that thinks Quality is the responsibility of QA is working with a 1950s mindset!! Dacor is pitiful and will certainly not last as a company with this kind of quality and customer service!!

I purchased this upgrade to my kitchen renovation. The stainless steel stove has a great look, but that is all it has. This is my third repair (with much difficulty). The same problem - the bake ignitor goes bad and sends gas smells throughout the kitchen. On Christmas day, after preheating the oven, I opened the oven door and the inside was one large flame. The heat was intense and my right arm got hot from the heat. I immediately closed the oven and cancelled the bake setting. When I called Dacor the following morning, I thought I was talking with a robot. No emotions, no sense of caring. They must be programmed. I got no satisfaction. I said, Do you understand? My stove went on fire and on Christmas day. My family was not sure if they should leave my house. I am extremely disappointed with Dacor.

We purchased a home with brand new Dacor appliances. Within 1 year, the relay board had to be replaced. One year later, the relay board has to be replaced again. Its $600 each time for parts and labor... The part alone costs $500. The company does not warranty the relay board. At this point, we should have purchased a new wall oven. They claim these are superior appliances. Our gas stove top works well, but the wall oven and refrigerator have been nothing but problematic. We will never purchase this brand again.

Im on my second Dacor 36 range! I absolutely love this product. The large grates on the cooktop allow me to have multiple things going at the same time and the size of the oven is amazing. The oven takes a full commercial sheet which allows me to cook 3 or 4 dozen cookies at a time! Dacors convection system is undeniably the best in class. I can roast garlic and bake a cake at the same time with zero flavor transfer! My turkey at Thanksgiving is so amazing Martha Stewart would adopt me if she could see it! It truly makes the kitchen the heart of the home, not only is it aesthetically pleasing but it is the center of all things yummy at our house!

Dacor Epicure Dual Fuel Range and Microwave - Where to begin? Perhaps at the end is best. Dacor appliances are shoddy, unreliable, outrageously expensive to repair and there is no customer support. That about covers it. We bought the above noted pair during our kitchen renovations 8 years ago. We thought that Dacor was a premium brand that would give us long trouble free service. How wrong we were! The only thing Premium about them is the price. 4 years ago, the microwave door refused to latch. Thanks to YouTube, I found out how to remove the door backing and found that the plastic part that comprised the latch was broken. Dacor was contacted - they no longer had the part. Try the open market I was told. I managed to jury rig a repair by using a wooden shim. 3 years ago, the range packed it in. Another repair - this time I was told it was the circuit board that had failed and which was replaced to the tune of $700 and I was cautioned that the second circuit board was not working very well - the interior light would not illuminate and the blue lights indicating a lit burner didnt work, and I should change it too. The smaller circuit board was costed out at $400. Last week, the door latch motor failed and the range began to beep incessantly. Now the oven cannot be used and repair costs quoted over the phone were in the 1000$ range. Thats it for us. Dacor is junk and belongs where its headed - the junkyard. Dont buy Dacor. Live and learn I guess.

If anyone else has this experience with Dacor ovens, we need to have a class action suit against Dacor! While baking Christmas cookies this week with my grandchildren, my ovens stopped working and started beeping. The error code was F3. I was able to get a technician rather quickly who diagnosed the problem as a failure of the control board which affected both ovens. The replacement part was discontinued from production in 2011. My ovens are 12 years old and cost over $4,000 at the time. What a pickle I was in a week before family coming for Christmas dinner!The technician said my only recourse was to send the control board to a refurbisher and he did not know when the board would be fixed - all for a whopping costs of over $600.00! I find it unacceptable that Dacor discontinues a control board and forces the consumer to either buy new ovens or pay the cost of a refurbished part that I hope will work. After spending thousands of dollars, how does this happen? What can be done so the consumers who purchase appliances with good intentions are protected from manufacturers that dont stand behind their products? DACOR I NEED ANSWERS!!

I have owned a Dacor Convection microwave for a few years and is so far the best Ive ever owned. It works great every time, has great preset features and also has a great stainless steel look. Great Product.

This will be the third service call on my Dacor Built-in Refrigerator with the freezer making icicles and the fan making a loud noise. On top of that, I have two light bulbs in the freezer that went out from the ordeal. From my review of the complaints here on Consumer Affairs, I see Im not the only one with this issue. This is a yearly problem, and I hope Dacor would step up and resolve this for me since it truly is a poor design issue and no fault of mine.

The Dacor gas range/ oven and wall oven were here when we bought our house in 2010. I would never buy any Dacor product again. I will have to look for a replacement for the gas cooktop range. The Dacor gas cooktop is OK except that EVERY time you turn on a burner, one or two of other igniters start clicking and wont stop until you find which one it is (not always the same) and turn it on and off. Please heed this and all the other warnings from the choir. DO NOT BUY DACOR!It is all very expensive junk. The oven temperatures fluctuate while baking. The oven range unit is out of warranty. So our home warranty AHS covered it but they kept sending out the same grubby slob who never fixed the problem but did charge us for the $75.00 service fee. They replaced the oven controller and the temperature sensor. This did not fix the problem. We have a full size oven that we cannot use! Then F1 beeping nonstop, and we have to turn power off to stop it. Now, out of the blue the downdraft fan just started extending and retracting over and over again with no way to stop it without going back to the electrical panel and flipping the breaker that it is wired into. That leaves us with no kitchen and no bathroom plugs! I hung up after 35 minutes on hold. I was just trying to find a certified technician in Bend, OR. Piss Poor Products and Very poor customer service.

My Dacor Double oven is less than 5 years old. Lately, the broil function has stopped working well on both ovens. I contacted the ONLY authorized Dacor repair center - Home Appliance Repair GTA (HARGTA) and told them my broiler wasnt working well. Their repair technician came to my house, took both double oven doors off in order to give me the assessment – that my upper broil function was not working well. In fact, both upper and lower do not work well but thats a side issue. In the process, the technician broke or did not properly reinstall my double oven door. I called and he returned and again, removed BOTH oven doors. Now, my upper door is working well but my lower door has no hinge and falls hard and heavy. This is extremely dangerous. I have left multiple messages with HARGTA and they are not getting back to me. Ive even contacted DACOR which is only in the US and they havent gotten back to me either. I purchased a Dacor oven to get a quality appliance and excellent after care service. It appears that both the appliance and the aftercare service do not live up to their reputations. P.S. The quote to repair 1 broiler is $750 after less than 5 years of use. That will equal 1/4 of the oven cost in less than 5 years.

I wish we had seen these reviews before we spent 6k on an oven and cooktop. Ordered cooktop and oven in November. Custom color over to match cabinets, still have not received oven (were at the 8 week maximum wait time already). Cooktop appeared fine when we received, but when we went to install, noticed something rattling inside. Looking through vent, noticed several broken interior pieces moving around. Contacted Dacor 3 weeks ago for a replacement or repair, and still nothing. They made us go through dealer, and last week told dealer we refused service. Ridiculous! Now they are telling dealer they cant find a servicer nearby. Am considering declining payment through credit card company for their lack of follow through and service, and let them come get their unit.

Dacor customer service contacted me and worked with me and the appliance repair company to get the proper parts to fix the oven. Everything is fine! We once again really love our Dacor wall oven.

Warning: Warning, safety hazzard for all, adults and children. Recommendation: The knobs should be set on the top of the stove, not the front where children can reach. Control knobs should click when fire and gas is turned off, and highest flame setting should be at the end of the turn just like a clock. I inherited this range as new owner of the house. Today I used the high flame option of the gas stove. When I was done with cooking, I turned off the gas according to the knob position, front of the turn. Later I discovered the range was not exactly off. It was still hot but no flame could be seen.I checked by sight the control knob position, it was set incorrectly in off. Then I touched it and realized the knob actually has a bit more to go to the end, slightly before the off position. Therefore it continues to release gas with unobservable flame. This knob does not click when user turns it to the off position. It is just a silent knob with an inaccurate cue of a heavier black line for off and on indication. Besides, high flame setting comes at the beginning of the turn of the knob rather than the end, it is counter intuitive to our mind of increase heat by turning the knob further on, like our clock. Oven racks are hard to put back after cleaning. Once a rack almost tumble out while food was sitting on it.

We purchased the Dacor refrigerator on 11/19/2018. Wasnt delivered until 12/17/2018. Freezer failed on 1/15/2019, had a repair on 1/30/2019 and on 1/31/2019 the entire unit failed. Dacor customer service is awful. Product is awful.

I completely gutted my kitchen on 2/22/92, and purchased a Dacor CPD230R double oven. Whenever I used the self-cleaning function the next day, F0 would appear. I would have to get a repairman to come to my house. This cost me a fortune. For one year, I just used the bottom oven. I finally called Dacor, and complained. I wrote a letter to Mr. **, and wanted satisfaction.They decided that I could purchase a new, better oven for $1,480.00. This was 1998, so in 6 years, I spent $3,680.00 for 2 ovens. After 5 years, I started having the same problems. Every time I used the self-cleaning function, F0 would appear. I just totaled my bills for the new, better oven, and I have spent $963.00 and it would be more, but I figured out, if I pressed cancel and held it, the F0 would disappear. So every time I used the oven, that is what I did. This would last for 8 months. The oven completely shut down, and I could not use the top or bottom. I just had a repairman here, and he said i need a new membrane assembly, and latch. They were supposed to call me with an estimate. They just called, and said the part is no longer available. This is upsetting. Reading the reviews, I see I am not alone in my dissatisfaction with the Dacor oven. Now, I will be redoing my kitchen.

I have owned a Dacor dual fuel 6-burner range for several years. I paid approximately $5,000 for the product. It has proven to be totally unsatisfactory. The gas burners click and make noise whenever you try to turn the burners down to a low temperature. The cook top is very hard to clean. The range is a constant problem. It smells bad, does not heat up promptly, and the broiler feature is always a problem. A gas oven is supposed to heat to and keep a constant temperature - the Dacor does not. The broiler will not cook food evenly or well. The door to the oven will not close properly and is constantly partially open. The hinges do not seem to work properly.Most importantly, I have tried on many occasions to get Dacor to do something about the defective product. They have been totally non-responsive. When I did finally get somebody to come and look at it, they spent about 2 hours cleaning it, accused me of using the wrong cleaner on the cooktop, and presented me with a bill for $800. I asked if they would just give me my money back and take the defective product with them. DONT BUY DACOR.

We have owned our dual-fuel Dacor stove for about four years. We purchased this stove because we needed a down-vent - this is how our kitchen was already configured. We had only the Dacor or Jenn-Air stoves as choices and went with the Dacor. I have been thoroughly pleased. Everything works consistently including the self-cleaning feature. Prior to this stove, we had a Thermador which was expensive and NEVER worked consistently. One feature or another was always on the brink. The Dacor is such a relief. And good looking, too.

We purchased the Model MOH130S in 2006 from a very reputable distributor of high-end appliances. In 2009 we required a service call to deal with temperature control. The oven was out by more than 40 degrees Fahrenheit. This resulted in a relay board, item 101559, to be replaced. Dacor was nice enough to cover the cost of the board, but not the cost of the $152.00 service call. In 2013, guess what? Relay board, this time out by more than 50 degrees, item # 101559 required replacement again only this time it was not covered and cost of $628.00. Here we are, 2016 waiting for the service provider again as temperature is out by over 60 degrees. Roasts, Turkeys, Chickens and everything else have been dying slow deaths in this unit and are awaiting yet another bill to deal with temperature control. Dacor will do nothing until another $150 service call confirms the problem. Hmmm! What to do?

Unfortunately, the screw broke in two that held our Dacor refrigerator door on and much to our dismay, the door fell off. Dacor was prompt and courteous in sending a replacement lower refrigerator door hinge to the service company and covered the full cost of labor even though they initially said the refrigerator was out of warranty (two years old). Our experience was positive with James who gave timely and a customer-focused response. He also called to follow-up after the repair to make sure we were happy which I appreciated. I hated that the door broke but was very pleased with the repair and the fact that I did not have to pay.

We remodeled our home and purchased Dacor appliances for our kitchen. Range, love it, Microwave, 30 Double oven and warming drawer (promotional give away). The ovens from the beginning do not function well. To warm up the ovens I have to wait 45-50 minutes and it buzzes. It is at temperature but then when I look at thermometer we are close to 75 degrees below. It recycles temperature every 75 degrees too. We had many repairs to the original unit to the point the repair person recommended that Dacor replace the unit. They did, another disaster. First they dropped the old unit while removing it chipping my granite, destroying my drawer panel and then left an absolute mess. The second unit has the same warm up issues, holding temperatures and oh wait, fans ran for hours after they were turned off. Broiling amazing. Baking and convection, a joke.The last repair person told me to open the oven and turn the cookies to have them cook evenly. And do the same when cooking with Convection. :/ I am currently looking for a reliable double oven that I can use and feel good about the food I serve (to be cooked). Dacor basically said that they cannot help me anymore because we went out of warranty last year and sent a repair person to basically say it is acceptable. Obviously for someone who does not cook, just sayin.

I have an older cooktop. Yes it is 15 years going strong but I have ran into a few issues where I know the repairs would be pricey but especially the parts. After talking to a few representatives, they truly want to help you. Nothing is free and I don’t expect it to be, but I am glad they they helped me get my cooktop back to functioning again. I hope someone finds this helpful before reading or writing bad reviews.

It give the peace of mind, knowing that having a Dacor cooktop (RGC365) I have one less thing to worry about it. Food is always on time, and my wall oven is so simple to use and clean. Like I said one less thing to worry about it. I been a Dacor customer for over 12 years. There is no need to look any farther. My next kitchen will be a Dacor Set.

About 3 years ago, I spent almost $5,000 on a Dacor double oven. We had it less than 3 months when the motherboard had to be replaced. About 3 months ago, I started to get various error codes and a continuous beeping. An authorized Dacor service repairman has replaced the motherboard three times. He was on the phone each time with Dacor, however we still get the error codes and Dacor has told the service repairman that they are stumped and dont know how to fix it.Here I am, having a beautiful expensive oven to look at but was unable to cook a turkey for my family yesterday! It seems that there is a major error in this oven, and I am stuck with a huge repair bill and an oven that does not work. I can only hope that Dacor will step up to the plate and come up with a solution or replace the oven which obviously is a lemon.

We purchased Dacor appliances twice, (double ovens, warming drawer and gas cooktop), after our first flood, and then again, after we flooded from Hurricane Harvey. (Dacors customer service was excellent in helping us replace all our appliances when we were going through such a horrific disaster because the vendor we purchased our appliance from the first time, wasnt in business anymore.) We were very satisfied with our appliances the first time we remodeled, that we purchased them again, and have not had any problems. The ovens heat up quicker than other high-end ovens and the range top cooks evenly and looks beautiful. I would purchase again, but hopefully, I wont have to.

When I pay top-dollars for a supposedly high-end product, I would expect performance and durability. That is not the case with Dacor. This manufacturer charges top-dollars for their appliances but their products do not live up to expectations. I purchased a Dacor gas cooktop range, and within a year several blue-indicator lights on the knobs (which indicate the gas is on) failed. At that time it was covered under warranty, and even then it was a hassle to get the repair technician to come out and take the range out to get to the electronic parts. After replacing two of the lights, the other lights failed as well, and then the replaced lights eventually went out. Now, only one out of the five lights work. After a year, the appliance is no longer under warranty, and it is too expensive to get it serviced. Its not only a cosmetic issue, but a safety one as well.Were in the market for a single wall-oven, and I considered a Dacor for its clean and stylish design. However, after reading the reviews about Dacor, Im veering away from this company. Sadly, as much as I want to support a Made in America company, the pride of workmanship and customer service doesnt live up to this companys branding.

Dispenser spits out ice cubes onto wood floor everyday. Told it is design issue and nothing can be done. We have to constantly check the chute is empty after used but we can be nowhere near the fridge for hours and hear ice pop out onto floor. My grandson has tripped and fell and me also. Im more concerned for safety than anything. Also our hickory wood floor is concern.

Previously, I submitted a complaint here and I would now like to amend it. The problem(s) that I experienced with my 8 years old Dacor 30-inch wall oven was what I described in my earlier post (July 9, 2012). But after posting here, I was contacted by a Dacor representative not once, but several follow-ups to ensure that the problem was resolved to my satisfaction. It was and Im now very impressed with Dacors customer support. To be fair, I should have contacted Dacor with my problem before blasting their product here.It has been a good oven for 8 years and given their support that Ive recently experienced, Id be more inclined to purchase Dacor products in the future as it appears theyre willing to stand behind what they sell. Im really glad this issue was resolved because I was about to throw in the towel and buy something else, but couldnt find anything else that looked near as good as my Dacor and had glowing product performance reviews.

I have had nothing but trouble with a wall oven I bought in 2010. Basically just bad electronics. I finally replaced the oven in 2014 and had to get another Dacor to fit the opening. The new unit still does not heat evenly and is consistently off by about 50 degrees. Customer service is not helpful at all. Local repair shops cant really fix issues. Terrible company. Cant figure out how they stay in business.

We got a Dacor oven and microwave wall mounted Unit 7 model DMT 2420S when we remodeled our kitchen. I have had problems with the microwave with sparking on and off. I have stopped using it as I am worried about a fire.

As a contractor, we were fortunate enough to build our dream home which was completed in 2005. After much research and many show room visits, we purchased Dacor appliances for our kitchen. As the saying goes, if I knew then what I know now. Our biggest (note I said biggest, not only) issue is with our ESC130 oven. If you own this oven, do not, repeat, do not, use the self-cleaning mechanism. I have had this repaired once and then replaced once (along with a relay board). I seldom use this because I know when I do the lock mechanism will continue to cycle until it is replaced. This means, while I can still use my oven, I have to time when I open the door based on when the lock is cycling in the unlock position. I must also turn the oven off at the circuit breaker or listen to the continuous warning beep that the lock is cycling (as if I didnt know).After repairing this feature once, I next choose to have the mechanism replaced and Dacor offered me a discount on the parts (the oven was and still is out of warranty) at a cost of more than $500.00. This is on top of what I had already paid to have it repaired just 18 months earlier. I feared using this feature again as I didnt want a repeat performance. After cooking macaroni and cheese yesterday, I felt I really needed to clean the oven and made the mistake of using the self-cleaning feature of the oven. I dont know why I was surprised when the locking mechanism refused to stop cycling.I contacted Dacor today only to speak with the rudest customer service representative I have ever encountered, Steven. No last name. He is the only Steven who works there. He refused to listen to me, spoke over me when I did try to talk, and did not allow me to speak with anyone else. There are no supervisors available on Fridays and he could not transfer me anywhere. I left a message for someone else to call me (they did not). I called back later that afternoon and was given the name of a supervisor, Nhi. She was not available and I spoke with another customer service representative. I learned that Dacor is aware they have a problem with this locking mechanism and are trying to correct it. This got my hopes up, thinking that the company would now do the right thing and replace this mechanism at not cost to me, or at least at no cost for the parts. Not so. Even though Dacor knows there is an issue with this mechanism and they are supposedly trying to correct it, all they can offer me is a discount on parts. Really? Wow! A discount for a part that you know doesnt work properly and probably wont work properly because they are still working on the problem? I just really dont know what to say. Is this supposed to make me happy as a customer? Would prospective customers want to buy a Dacor product knowing that Dacor is more than happy to sell me a known defective product at a discounted price and they should expect the same? It is probably needless to say that I would urge all prospective Dacor owners to not waste their money on any Dacor product as they do not care about their customers. I will certainly be doing my part to warn others and hope this serves to warn others as well. Dacor has a lot to learn in terms of building even what could be called a good product and standing behind what they sell as well as becoming a customer service oriented company.

Eight months ago I renovated my whole kitchen with all Dacor appliances, cooktop double wall oven, refrigerator and dishwasher and I could not be more pleased. I wanted to wait a few months before I wrote this review in order to make my review more accurate. I love the modern design of all the appliances. The refrigerator is nice and roomy and the cooktop has been very reliable. Dacor products cost a bit more but they are well worth the extra money!

I got a fridge, a wall oven, a cooktop, dishwasher, wine dispenser and now I am picking up a wine cooler to compliment my wine dispenser. I like a variety of wines and I need a lot of storage space. I plan to buy more wine coolers. Being the top cat of me crew I need a image and style to keep up. Capiche. Ciao.

I am amazed by the sleek look and design of the new Modernist refrigeration Dacor has to offer. The built in column pairing is my favorite with all stainless steel interior, tempered glass, and LED lighting that WOWs anyone who opens the door. The water dispenser is flush against the interior wall of the refrigerator and the freezer can offer two ice makers, one for regular ice and one for your high end cocktail drinks. These units are PURE LUXURY and HIGHLY RECOMMENDED!

I'm just writing about the Dacor fridge. We've had the fridge for about 6 months and its amazing. It can fit so many items..we tend to buy a lot from Costco and everything fits in the fridge and freezer no problem. My two favorite things are the fresh drawer and auto fill water pitcher. The fresh drawer temp can be adjusted based on what you want to place in there. Wines, cheeses and we've even stores desserts in there. And the auto fill water pitcher means no one has to remember to fill it up. Small detail but so nice to have. Definitely recommend this fridge.

I am very, very pleased to report that I was contacted by Dacor a day after I posted my review which addressed a second failed relay board in 7 years. A really helpful Customer Service Representative called me (not emailed) to discuss the issue in great detail. Within a matter of days, a local repair service had received the new part from Dacor and scheduled an appointment with me to come out and replace the defective part. Dacor covered both the part and the labor. Im really sorry that the oven needed a second major repair but I will say that Im impressed with Dacors resolution of this issue!

When the beverage center was initially installed 5 or so years ago, I went to put wine bottles in the wine drawers and surprisingly, the shelves are too shallow to properly hold some of the bottles especially tall Riesling bottles. I contacted Dacor to get some response to the poor design and got no response. Now the unit wont chill and I have just paid a repairman $162 to tell me it is not repairable because the unit has a leak in the refrigeration system and it is within a foamed in area of the system. So after only 5 years, I am replacing my wine fridge, not what I would have expected from a brand that touts itself as being high end. I am very dissatisfied with Dacor and certainly will not be purchasing anything of that brand again.

Updated on 09/08/2019: Received a long apology from Dacor regarding their complete inability to service our range stating they would make it right. After sending them all my contact info privately at their request, we have heard nothing. My husband drove to Houston to their showroom, met with Dacor rep out of California, still nothing. Note there are only a few suggested repair services on their website which none cover our area. Avoid Appliance Genius. They wanted $ 500 just to drive 50 minutes travel cost. So here we sit, broiler in main oven out, lighters do not work, and the control screen is blank. Yes, Dacor was great until something broke.Original Review: Our Dacor range was great until it started needing repair. First the broiler went out in the main oven. Then some of the lighters quit working. When we called for repair, every place we called said they would no longer service Dacor because they were unable to get parts. For over a year we have gone back and forth with Dacor state office. They finally sent a “tech” from a video repair store. Really. He charged us $170 to drive to us. Then said he couldn’t get the brass rings off the burners, sorry. Called Dacor again and they said if we found anyone to let them know!!! Yesterday, the the touch panel burned out. I’m done. Dacor does not stand behind their products. I have documented all conversations. Do not buy Dacor.

I had an issue with the wall oven light on my Dacor Preference double oven. To make a long story short, after contacting Dacor directly, they made sure that the unit was fixed by providing the part directly to me and confirming that the local repair company would be willing to install it. The oven is 8 years old and in the end, what I spent seemed reasonable to get a fully functioning oven (membrane switch). They were prompt, personal and courteous in their response to me. I came away feeling that Dacor takes pride in their history and their products! They also cleared up some misconceptions that I had regarding the status of their company. Although it was frustrating to have an appliance not work properly, I feel that the customer service Dacor provides makes their company one worth sticking with. That makes a big difference in todays impersonal world.

Purchased a Dacor freezer. Freezer does not come with outer panel. Understandably, because you can choose to put your own custom panel on or order one from Dacor. Found out Dacor was bought by Samsung, a few years ago. So I decided to order a Stainless steel door from Dacor. One of Dacors reps suggested I order from J@J international. I placed order and two days later they called back saying they cannot ship door to me UPS nor FedEx will ship it. They refunded my money, so I reordered from someone else. Got ss panel toe kick and handle. Opened box only to find out no hardware, brackets ss trim for sides screws and so forth. I assumed mounting hardware would be with door. So began the part search for parts. Come to find out Samsung changed Dacors part #s. Vendors who sell the parts could not come up with parts or told me not available. Reliable parts agent told me this. I was told they should have come with freezer. Meanwhile called back Dacor to someone who specializes in dealing with these issues. She took over 45 minutes of my time giving me the impression she was gonna resolve the issue. She finally said we have the parts and inferred that I must have not talked to reliable parts. I assured her I did. She continued to refute what I told her. I have been right at two months trying to get freezer door installed. I called an Appliance dealer in Salisbury Md. to get assistance. He told me when Samsung bought Dacor he dropped line. I now see why. It has been the worst experience I have had with a company that has absolutely done nothing but appear to be concerned and say they are sorry but do nothing. It looks like it will be another 750.00 to get a couple little trims and brackets and a few screws. If I had it to do over I would never have gone down this road. This has been a two month old nightmare that is still going on. Best advice I can give is steer clear of Dacor/Samsung. Was going to buy matching column refrigerator. Not now.

The Dacor ‘duel fuel’ ranger was $5,500, We have propone, and Dacor’s set up is for natural gas, so all the pots and pans got lots of dark residual. I wrote and called them many times, to no avail. Terrible customer service. Then the F1 error keeps beeping, non-stop. What a piece of junk. Non-stop issues. No service whatsoever from the manufacturer.

I have owned a Dacor microwave for about seven years and is so far the best microwave Ive ever owned. It works great every time, has great preset features and also has a great sophisticated look. I would recommend Dacor appliances based on my experience with this microwave.

We bought our house in 2010 and our Dacor stove was supposedly newer. When I went to clean it, I found loose screws in the bottom. Apparently, the convection element is loosing its screws and washers. Ive had this appliance fixed once already when the cooktop kept clicking. The black plastic around the controls cracked mysteriously. It takes 3 hours longer to cook a turkey than it should. This is a strange stove, which supposedly cost a lot. I wonder if a convection part missing two screws should be used?

This week Dacor installed my 2nd replacement gas range. I remodeled my kitchen 3 years ago and chose Dacor because I had a great experience with their appliances in the past, had their oven and stove in my kitchen for 15+ years and never had a problem. With the first new range, the oven started to automatically shut off due to excess heat escape, so the safety feature would kick in and shut the system down, in addition the knobs would become very hot even when the over was used briefly, 12-15 minutes. I was very impressed and happy with the customer service through Dacor, they immediately gave me a brand new over. Exactly another year, the new oven had the same problem, door begins to not hinge properly and heat begins escape, knobs get dangerously hot.This week Dacor very kindly, replaced my appliance with the new Dacor Renaissance 36. I used the oven for 12 minutes on 400 and the entire exterior is dangerously hot. I do not have any children, however, if I did I would be terrified that they could seriously injure themselves. The exterior of an oven should not become hot like this. Has anyone else had this issue with Dacor? I feel they have been very responsive with regards to customer service however I want an appliance that is safe.

The oven temperatures fluctuate while baking. The company was at first responsive. They replaced the oven controller and the temperature sensor. This did not fix the problem. When I called and left messages, there was no call back or response. Very poor customer service.

The enamel on the bottom of the top oven has blistered and the metal beneath is exposed. If the oven is heated, there is a chemical smell. This is such a dangerous situation that the ovens (double) are being removed as I write and will be replaced with a different and more reliable brand.

We did a complete kitchen remodel 2 years ago. My husband talked me into purchasing american made over the Bosch products that I preferred. This has been a horrible experience. The dishwasher does not clean. I was told to prime the water and purchase the higher end platinum packs. That did not work, then it was add lemi shine. That has not worked. The water never completely drains, ugh old water. A service tech could not tell me where the rinse aid indicator light was and insisted mine did not come with one! Microwave does not heat in an adequate time. All listed times I have to double time if not more. I was told to put a Rubbermaid container over the food product to insulate the waves... ha! Oven does not regulate heat. when I go to increase the heat during stated recipe, the screen always say 50 even though I would have it at 375. I was told it always will revert back to 350, really. I had all Kenmore appliances prior to the Dacor and never had a problem... Do not buy, I wish I hadnt. We are filing this with BBB and headed to small claims court.. This should be fun. I hope Dacor sees this.

I did a kitchen remodel in 2008 and was convinced by the sales guy at Home Expo to go w/ the Dacor over the Wolf. I bought the dual-fuel 36... Within 2 years I had serious problems. The oven, when not on Convection Roast or Con Bake, just using Bake will consistently turn itself off... Ive ruined many a meals, usually big ones: Turkey, Prime Rib(long cook time items). This was by far my most expensive investment in my kitchen and by far my biggest disappointment. I have called Dacor in the past and was told they could refer me local repair people, I was on my own for fixing it. Again, huge disappointment.

We purchased a Dacor induction range 5 years ago which cost $5000 plus installation parts and service costs totalling $10000. Two days ago, an error code showed up indicating that the generator needs replacement. I contacted Dacor who states that the part is discontinued but that I could contact a refurbishing company (Corecentric) to send my generator to for possible repair. A service technician would have to remove the generator, I would send the part to Corecentric, then IF they can repair it, the tech needs to reinstall it. There are no service providers that Dacor referred me to that will service a refurbished part. Even if I wanted to try, I as an owner, cannot remove it myself because Dacor does not provide the service manual to do so. I spoke to Dacor multiple times about this problem and management stated that since the product is so out of warranty that they cannot offer any other repair option, compensation, or replacement even if the part is deemed unrepairable by Corecentric. When you pay $10000 for a product I expect it to last more than five years and that a reputable company would stand by their product and service. Essentially, Dacor inferred that we are out of $10000 because a part that POSSIBLY can be refurbished for $215 plus service costs, cant get serviced and Dacor takes no further responsibility. I have heard stories from appliance providers and service providers that since Dacor joined Samsung, that their customer service is poor and products have become inferior.

Don’t purchase Dacor appliance - it’s been worst purchase experience ever and I am extremely disappointed. After six months since I purchased the Dacor built-in refrigerator, Dacor couldn’t even ship the proper installation parts and my refrigerator is still not working. Problems:1. Their high end $11K Dacor built-in refrigerator cannot even be installed. Wasted five months communicating with both Dacor and the retailer AppliancesConnection. After five months they were still able to ship the proper missing installation parts. Over the past five months, I talked to six different team members in Dacor customer support team, escalated to customer support lead and also talked to their regional technical manager, none of them is able to solve my problem and ship the right installation parts.a) Their process is extremely messy. Their customer support team had no idea about installation requirement of the refrigerator. And the request from their customer support team is declined by their internal Parts department again and again, only to find out installation parts should’ve shipped by the retailer. This is extremely confusing now and no one in the team seems to understand the right process.b) After Dacor acquired by Samsung, their manufacturing process is very messy and parts are extremely confusing. There’s one version of required installation parts in Dacor manual and one version of Samsung parts in the Parts guide, and no one in the team seems to understand the difference and how to map from one to another (they insist on sending me Samsung parts instead, claiming they’re compatible). I am now the expert myself to understand all their parts and able to identify many problems in their manual.2. As a high end brand, Dacor doesn’t seem to care about their customer at all. As a customer who did kitchen remodeling and had no refrigerator to use for five months, no one in the team seems to care about their brand or their customers. With this huge gap in the process, no one thinks about the problem from their customer’s perspective or shared empathy with me. Dacor as a brand is really bad and I am extremely disappointed in both their product and services.

I could have written every one of these negative reviews. Ive had all the same issues with my Dacor Epicure oven. Faulty computer panel, failed motor in the downdraft fan, oven not maintaining temperature (meaning NOTHING cooks correctly in this oven), burned out lower element and discolored interior. And let me add that the interior oven fan stays on for about half an hour after you turn off the oven. What purpose could that possibly serve???? Suffice it to say that this is a poorly made product by a company that has no desire for repeat customers. I am currently working with customer service to try to get my oven working for Thanksgiving, but I just dont have much hope after reading all of these similar issues. Clearly, they manufacture a sub-standard product and sell it at premium prices. Nice business model, for a while.

We bought a whole new kitchen's worth of Dacor appliances - the Modernist line. It's too soon to review their performance, but so far they work well and look fabulous. Most importantly, I had an issue registering my appliances for warranty. I sent an email and not only did they resolve all my issues, registered everything for me, they also notified me I was eligible for an extended free warranty program, and they set it all up for me without any effort on my part. I wouldn't have even known if they hadn't done it for me. So far, I'd say that they have stellar customer service. When researching online before making the choice to go with Dacor, I had trouble finding information and reviews. I wanted to make sure and share my good experience since all too often people only share when they have had a negative one. I hope this is helpful to someone looking to buy!

After remodeling our kitchen, we purchased a professional line Dacor stand alone gas range/oven. Within a year, the heating element needed to be replaced. Subsequently, the control panel almost caught fire and needed replacement, following a second heating element. The oven is not reliable and has cost us over $600 in repairs, labor and parts. The Dacor company is not willing to recognize that this oven is a lemon, even though their rep admitted that the number of repairs seem to exceed the average number. The company refuses to pay for a tech to come in to examine why this range continue to have electrical problems. It is not working again, and the customer service rep wants us to pay out more money to have their tech diagnose the problem and pay the cost of repairs and labor, while they will cover the cost of the parts. I am done paying out more money on a defective appliance. I could have purchased two new less expensive (and more reliable) ovens by now.

We had our range oven for less than a year and the front electric panel cracked, there is no stress to this area. I called the company and they admitted the entire panel was defaulty and had a recall. They did replace it. Within 5 months the new one cracked in the same place. This time they stated the unit was out of warranty. I told them the same type of recalled panel was installed. They said I could buy a new one. Ha! Since then many more cracks. I will never buy anything made with the Decor brand nor do I recommend them! Happy shopping.

This fridge is great. We visit warehouse stores for groceries and everything fits perfectly. The shelves can move for tall items or more bulky ones. The freezer is large and can fit so many different items. My 2 other favorite things are the fresh drawer and auto refill water pitcher. The fresh drawer temp can be adjusted and can fit anything from wine to a cake to cheeses and meats. And an auto fill pitcher keeps the water super cold and you never have to worry about someone forgetting to fill it back up.

DONT recommend model #MOH130. We were so impressed with the options that this oven came with. Sadly, with all the bells and whistles also came a ton of repairs. After the 4th repair, our service rep said the relay board needed to be switched out. (Half of the service men who came to my house seemed to be grasping at straws trying to come up with an explanation why the temperature was fluctuating, or why it took so long to heat up, etc.) Then I get to wait 2 weeks for a part to be ordered/arrived and re-schedule service. Last week got code U22 - oven wont even turn on. This oven is only 6 years old. NO THANKS - NEVER AGAIN will I buy anything from this company.

We remodeled our kitchen 2 years ago but didnt upgrade our refrigerator because our old one was still working. My wife and I always wanted a Dacor refrigerator. We like their design. Our old refrigerator finally died after a little a year after our reno. We were sad but happy at the same time because we can finally go buy a Dacor fridge weve always wanted. We shopped around and compared Dacor, Sub-Zero, and Thermador just to make sure Dacor is for sure what we wanted. We chose Dacor and we couldnt be happier. Its been almost a year and we still love our Dacor fridge. Now we will just have to wait until our oven dies to get a matching Dacor one.

We moved into our home in 2012 and have had nothing but problems with our Dacor refrigerator (Dacor Model EF48DCBSS). Our issue is the drain pan heater AGAIN. This problem is, water that collects in the drain pan freezes and eventually builds up to a point where the fan motor starts hitting it, sounding like a helicopter landing in your kitchen! Weve had this problem repaired THREE times by TWO DIFFERENT repair companies to the tune of $1000. Both repair technicians said it was a design flaw and this problem would continue to happen regardless of how many icing kits were replaced. So a $7000 refrigerator will cost us $1000 a year to keep running?!?!?! After much research, its apparent we are not alone with this problem. We also had a Dacor microwave just STOP working (model #DMT2420S). It was only 8 years old. Our Dacor oven range (model #ER48DSCH) has two ovens and only one side retains the heat. The main side gets to about 300 degrees and then the temperature starts dropping. Here is the breakdown of costs for our so called high end appliances. Dual Fuel Range - $10000, refrigerator - $7000 (annual repairs of $1000), microwave - $500 (had to purchase new microwave $600). PLEASE LEARN FROM OUR MISTAKE AND DO NOT PURCHASE DACOR APPLIANCES. We have a refrigerator/freezer that we bought from Sears SIXTEEN years ago for $500. Still works like a charm! And thank God we have it, because it has had to be our backup for our $7000 Dacor.

We have a new (one year old) home with Dacor appliances. The microwave oven went on the blink the first month but was repaired by a factory approved repairman. Something to do with the computer. Now the double oven will not hold a temperature. We set the oven at 420 and it only goes to 360 even though the readout shows 420. We just decided to skip the repair process and bought a new Wolf oven. This is our second Dacor within the past two years and both have had the same problem. Dont waste your money.

Perfect size burners and small oven. Cooks food perfectly about 25° less than you think. Great grill on top. Easy to clean.

We purchased a Dacor Oven model # ECS 136544 in 2009. Within two years, the relay board and thermostat in addition to an LED bulb required replacement. A year later, the broiler heating element and the second LED light required replacement. Dacors response (800-793-0093) was read your explicit warranty and the implied warranty under Section 2-314 of the Uniform Commercial Code isnt applicable. The total expense for repairs is over $1,000. Did we get a lemon, or are Dacor ovens prone to failure? Should we have been thinking Wolf?

After purchasing what I thought would be ovens of a lifetime I could not be more disappointed, frustrated and angry at a company in my buying history! Since November of 2014 and longer I have been fighting for service or answers or at least honesty! The ovens have never worked properly, they do not keep temperature. The oven temperature drops 60 to 75 degrees while cooking over a couple hours. The control board was replaced. Still the ovens never worked. If you like to cook and cook for the bed and breakfast, which is why you bought an oven like this, you will have your ovens on for a couples hours preparing any multi-dish meal! I was treated rudely on the phone during routine troubleshooting and was never allowed to speak to a manager. Dacor for months or so later is buying back my ovens minus a restocking fee, on ovens that dont work, $1200!

Replaced a prior pro style range product with 36" all gas Dacor range and couldn't be happier. The styling is outstanding and the cooking performance is far superior to prior range. Simmer burners are amazing and convection roast is absolutely outstanding. Great product and experience!

This is our second Dacor wall oven. It is approximately 6 yrs old. December 22/14, I was cooking a Christmas turkey as per usual, and I noticed an odd smell about 40 mins. into cooking. Checking the turkey, the temp. was at 500 degrees and on broil. I burned holes in my oven mitts on the roaster taking it out. Even though I set the temp. at 325 convection roast, it reset itself to 500 broil. Nothing works except the clock. Called repair guy after the holidays. Said it is a control panel behind the keypad area. Ordered the part. Been waiting 4 months now for this part. Now, no Easter dinner either. After reading these complaints, I am worried that this part replacement may not be the end of it.

We love our Dacor 36 refrigerator. We have owned it for 6 years and never had a problem with it. Our friends and family have also complimented the look and style. We are happy with our purchase and would recommend Dacor products to anyone.

Our new ranch has three Dacor microwaves, only one of which has had a few months of use. The others have very limited use. To this point weve not had problems, but given the opportunity to redo the purchases wed go with a popular brand, i.e., LG, GE, Panasonic. They are more flexible, parts are available, and all three combined would probably cost less than one of these. In fairness, I personally feel the same about our other high end appliances, Wolf, Viking, Sub-Zero and Asko. None beats our former appliances. Maybe its just about show.

We purchased a DACOR double wall oven (MOH2275) in April 2012. We are waiting for service to arrive for the fourth time since we purchased the oven. I find this unacceptable. We have had 2 other ovens in the last 30 years and they did not need any service. In general I have found appliances to be of such reliability that I dont get extended warranties. DACOR gave a 3 year warranty on this oven and now I know why. Hopefully this service will fix it for a long period of time.On the positive side, the oven really works well. It is so well insulated that we feel very little heat coming off it. One serious flaw its overall operation is the reheating of the oven. If I bake something at 350 degrees and then want to reset the over to 450 degrees, the oven does not go into preheat mode and does not let you know when you reach the required temperature. I am hopeful this will last awhile and not have to be replaced for what we paid for it.

We purchased this oven February 2009. On 6/7/11, we had to replace the touch pad assembly. On 12/16/13, we again had to replace the touch pad assembly with a cost of repair to this point of over $900.00. The over cost $2,395.00 when purchased. On 3/16/14, while on convection/bake the oven switched over to broil. On 3/20/14, a repairman came to the house. The condition did not replicate but the repairman, in conversation with Dacor, determined that the fix, if this should happen again, would require the replacement of the relay board and ERC control at a cost of $700.00. On 3/27/14, while on convection/bake, the oven switched over to broil. I called Dacor and was forced to leave a message.

I have a induction Dacor stovetop. Its stopped working and blinks an error code. Called customer service who didnt know what the code meant. I was told my model was 2015 which the rep said was old. It was installed in 2017. All they would offer was cheaper replacement parts if I paid for someone to come and figure out what the problem was and install the parts. I was told the replacement parts were not cheap though. I was told that because were the second owner of the house they couldnt fix it under warranty (even though it should be covered under warranty) because they couldnt say how it was used before (commercially or residentially). Give me a break!It gives me almost no confidence in getting this thing fixed. Warranty is a joke and customer service is terrible. So far I had to leave a voicemail for the reps next level who will call me back after the weekend. Im waiting to see what (if anything) they will do but from the first rep. I dont have a lot of confidence in their products.

Purchased home with installed Dacor double oven. Oven wouldnt reach set temperature, so replaced control board. Doable, but a real hassle to remove oven from wall opening and label, disconnect, and reconnect 20-something wires. Two years later, the clock cannot take the correct time and oven timers do not work. Only fix: replacing the $300 control board again. I cannot recommend that anyone purchase these appliances as the control boards simply do not work for more than a couple of years.

Talked into spending $4700 on a wall oven on the recommendation of an appliance retailer. My concern was even baking and reliability. Was told I would be very happy as Dacor was best on the market. Well long story short, it never cooked evenly and after 8 years quit working. Had to lug the heavy oven to the city to an approved service provider. They thought it was the relay board (told the brains of the oven). Service provider changed several things (sensors, board and whatever else). Nothing solved problem. Phoned me and said I was looking at minimum $2000 and up. He threw oven in garbage. We didn’t even send the gas money to bring the dud home.Thought it should last longer than 8 years. I phoned Dacor. They wanted to know exactly what the problem and diagnosis was so I told them to phone the Service Provider. Said they would but I had to email copy of receipt which I did. A couple of months gone by and never heard a thing and they are not responding to my emails. DO NOT RECOMMEND DACOR.

Replacement light for the oven - I could not find anyone that carries the halogen bulbs for my oven and called Dacor parts line. The bulbs come in a package of two. They were $79.95. I was told I should have called two months ago, that they were $29.95. So would I buy another Dacor Appliance? I think not.

We had misfortune of owning whole suite of Dacor appliances for about two years now -- Cooktop, oven, microwave, and hood. The Ovens motor burnt out after few months of operation - This was covered and repaired by Dacor. Now Cooktop - Dacor Distinctive DRT366S/NG - just exploded with fire when we were cooking one night. This was very scary and dangerous situation. Dacor acknowledges that there was issue with this particular unit but they will not look at it or help us fix it. If you pay 5 times the price of a regular cooktop you would think that a company would have integrity to look into cases like fire and explosion to make sure these things not happen in the future but when they even refuse to look at the issue that tells you that they do not care. Imagine if GM/Ford told their customers that manufacturing faults are not covered anymore since the cars are out of warranty. This has been worst experience ever and we will never ever buy or recommend buying Dacor appliances.

In 2008, I purchased my dream home and had the opportunity to build my kitchen from scratch. At the time, I shopped Viking, Sub-Zero, Wolf, and Dacor. I made an appointment to tour the Dacor showroom and was blown away by the aesthetics and advertised performance of their line. I made the decision to fill my kitchen with Dacor products: dishwasher (ED24SCH), dual range (ER48DSCH), range hood (EH4818SCH), fridge, and microwave (DMT2420). To date, the fridge is the only appliance that has not malfunctioned. Within the first month, the microwave blew a fuse (covered by warranty). Within the first 6 months, the dishwashers motherboard blew (also covered by warranty).Since the 1-year warranties have expired, the range hoods electrical unit malfunctioned and ceased working properly ($400-plus in repair). The motherboard on the dishwasher has gone out twice ($1200-plus). The dishwasher rack has completely rusted and the wheels have fallen off ($800 to replace). The lights on my oven dial is out and the glass bottom inside the oven that covers the heating element has cracked (nothing has been spilled or dropped). In fact, I only use that side for Thanksgiving. I am extremely bummed (to say the least) and I feel that the products that I was sold do not live up to the quality level that they advertise. Additionally, the replacement parts are obscenely expensive, and at this time it makes more sense to replace the units rather than dump more money into a pit.

I am having issues with my Dacor oven and have tried to contact customer service since Monday 01/04/16. I was on hold for 27 mins and finally left my number for a callback. I have called every day and leave my number for a callback, no response. Today Thursday I sent a message and the response was that someone will call within 2 days. Great customer service. Buyer beware.

I bought a Dacor dual-fuel range in 2002 for my new house. Within 18 months, the control panel on the front had shorted, causing the stove to emit a continuous beeping. I got this repaired, and was advised that I should not use liquid cleaners on the stove! Two years later, the same thing happened again. Finally, about 4 years ago, another fault developed in the 3rd control panel, the circuit controlling the oven lights will not respond to touch, and the oven lights switch on and off continuously. Not prepared to pay for yet another control panel replacement, I switched off the power to the stove at the main fuse box. I have continued to use the gas cooktop only, lighting it with an ignition wand. The Dacor stove is only part-functional due to what is obviously a severe design fault in the front touch control panel, which causes the panel to short. I switch on the power to the unit twice a year to use the oven at Thanksgiving and Christmas for large roasts. This stove was a very expensive mistake. Luckily, I have a second (Wolf) oven in my kitchen, which I use instead for everyday cooking.

We purchased our range (Dacor Dual Fuel Range RSD30) in about 1997 thinking we had a good investment. We have replaced the bezel 5 times (the area that encloses the control area). Today the door glass has cracked. Whooppee! Merry Christmas! Each time I called about the bezel, I was told that they had a design flaw. The last time we had to replace the bezel and also pay for installation ourselves. We decided if this happened again, we would get rid of it. Well, it will be sooner than later as the oven glass has cracked. Needless to say, we are not return customers.

I built my home in 2003 and installed a Dacor 30 wall oven. After several years of poor performance, we started to get an error message. Dacor suggested replacing a board for $300. That didnt work so they had me replace another $300 board. That didnt work so they told me I needed a new front panel and it would run about $1,000. That board is on back order and they dont have a replacement date. Thinking that its bad business to sink $1600 into a troubled product that has terrible reviews on the internet. We found out that once you go with Dacor, you need to stay with Dacor due to an unusual, nonstandard size.Thinking that Dacor has improved their product we ordered a brand new $3,000 Dacor RO130 30 wall oven. It arrived promptly and I removed the defective $3,000 oven and put in the brand new $3,000 Dacor RO130 oven. What I got was a dead brick. The Dacor customer service has been awful, and will not allow me to talk to anyone in their technical side. The oven is getting power. Dacor customer service wouldnt help me unless I could prove that the unit was getting power. So I had to get an electrician in to prove that I had properly wired the 4 cords that came off the original defective Dacor wall oven. Get service help? No chance. I live 100 miles from Seattle and no one wants to work on Dacor. So here I sit with a $3,000 brick. No service and Dacor has no clue on how they will service this wonderful $3,000 RO130 30 wall oven that is an out of box failure. I dont see how a company that has this bad of a product, two generations of defective ovens, bad customer service, reluctance from the repair community to work on their products will be in business much longer. If you are considering Dacor appliances, consider the problems that I am having. The nonstandard size of their ovens will lock you into future purchases to replace their products that dont last 10 years.

Follow-up to March 31 posting: In 2001, we installed two Dacor wall ovens and a gas (converted to propane) cook top. The cook top has been problem free and the brushed stainless steel surface still looks like new. Both ovens however, at that time, were problematic during the two year-warranty period. Knowledgeable service people were hard to come by in our region. After numerous service calls, Dacor replaced one of my wall ovens at or around the three-year mark (outside of the warranty period). That particular unit had only one minor issue since then and Dacor replaced the appropriate part free of charge. The other original unit has been problematic since the beginning. The latest problem being the internal light going on/off for no reason and then a lack of response to light button on the front control panel.Long story short, I posted my frustration here on March 31 and was contacted by a Dacor rep within two days. He asked me for detailed info on the problem and located the unit in their files. Some of the past repairs were known to Dacor, but others were not since we just did them ourselves. I was asked to send a detailed description of the current issue along with pictures, which I did. Based on Dacors analysis or the pictures and the exhibited problem, they sent me, free of charge, a control panel membrane, a door gasket and a set of door hinges. We installed these items and the unit is now in full working order.In looking back over the past years of problems with this particular unit, its clear to me the issues all stemmed from an original broken door hinge. It was compounded by the fact that the service and repair folks at the time considered the door gap to be within tolerance and we did not discover the broken hinge until the door glass shattered and we needed to replace it, which required removing the door. Anyway, at this stage in the game, I am very pleased with Dacors response. It is my impression that they are trying much, much harder to stand behind their products. So, while just a short time ago I would have never considered another Dacor product, when the time comes, they would still be on my list of considered vendors because when these ovens work, they work great.

We bought the Dacor Wall Oven (ECS136SCH) in 2006 during a complete kitchen remodel. In 2009, the relay board was replaced twice. The first time, it was over $500 to replace. The second time, it was covered under the parts warranty when a terminal was bad. Now, I need another relay board and a new element which will cost over $700 to replace. For an oven that was originally over $3000, this is not acceptable, but what other choice do I have? The technician told me that Dacor has the worst mark up for replacement parts. I thought I had done my research and found that Dacor had a good product. I guess I was wrong.

Have had an on-going issue trying to replace an oven door....since early December 2020. Have gotten a continuous run around regarding status of new door and shipment of same. Friendly Customer Service Reps do nothing to solve this issue. The oven door is designed not to be repairable or user friendly. Poor support and steady excuses have created another DIS-SATISFIED CUSTOMER!! AVOID DACOR!!

Dangerous condition! I purchased a Dacor 36 dual fuel range 5 years ago. I reported the issue to Dacor via email with no response from customer service. I believe the no response was an attempt by Dacor to distance themselves from their responsibility for this potentially dangerous condition. Specifics: When pre-heating the oven in convection/bake mode, if the oven door is opened before reaching the set pre-heat temperature, a ball of flame will explode up from the opened door. The ball of flame is basketball sized and has singed eyebrows and hair on several occasions. To reiterate - it is a ball of flame, not super-heated air that is the problem. As a result, after non-response from Dacor, we called a decor qualified repair technician who diagnosed the problem as a bad igniter. The igniter was replaced and the problem still exists. I fear that a small child may be severely burned by the engineering design fault.

We purchased a Dacor Epicure dual fuel range when we built our house 7 years ago. It was the most expensive appliance we bought and we wish we hadnt. We have had no problems with the stove top, but the oven, specifically the broiler unit has been a consistent problem. We rarely use the broiler and use the oven perhaps 2 or 3 times a month. Yet, the igniter had to be replaced in March of 2008 and again, in June of 2010. In January of 2011, the broil gas valve was changed and now in September, the broiler is again not working. I cant see pouring any more money into this appliance and will sell as soon as I find a buyer willing to take a chance on it. We have been greatly disappointed in this product.

We have a Dacor gas range RSD30R that we bought to upgrade our kitchen in 2002. We have had several issues with the range to date. The first issue we had with the range was the auto lock for the oven cleaning cycle that failed in 2007. It was not covered under warranty and cost $88. The second item to fail were the oven door springs. They also failed in 2007 and covered under warranty. They failed again in 2017 and had to be replaced for a second time. The springs are too weak to hold the weight of the heavy door. $68-$78 for the springs. The springs could easily be changed out as the brackets are still good but they only come as complete units. The last item to fail were the ignitors. Only one ignitor failed out of the four but as the spark module ignites all burners every time any one is turned on, premature failure could be expected as all ignitors light every time. This time the part is no longer available from Dacor. Dacor does not support any products they build after 7-8 years. Parts will no longer be available. I would not recommend Dacor Appliances to anyone as the manufacturer does not support their own products very long. I purchased Dacor to buy American and I regret it now. In contrast every product that Miele made even 20+ years ago, parts are still available directly from Miele and other suppliers as well.

Dacor refuses to take responsibility for defects in their products. Our wall oven required two cooling fan motors and two relay boards over a relatively short period of time. In addition, all of the sensors had to be hard wired when the oven stopped working, and our service technician was informed by Dacor that moisture tended to get into the sensors on these ovens. We spent nearly $1500 on these repairs. Reaching a customer care representative at Dacor can take upwards of 20 minutes. Phone calls are not returned. Customers are left to pay the cost of defects in Dacor products.

This posting is in response to my original post regarding the Drain Pan heater issue in our Dacor refrigerator. My refrigerator was repaired on 10/16/2012 at no charge to me. My refrigerator is out of warranty, but Dacor stepped up and repaired the issue. The customer service I received was second to none, and I would like to thank James ** for that. Great customer service instills confidence in your product! Thank you!

Purchased Dacor Renaissance wall oven in July 2015, Model RNO130S. After less than a year and a half, the cooking temperature began to fail. For instance, set to bake at 425 degrees, the oven would appear to heat properly, but tried and true recipes would be pasty and uncooked at the expected time. I inserted an oven thermometer inside to test and found an erratic pattern of oven heating up properly to 425 but then sometimes dropping back to about 350 during cook time and refusing to ever reach 425 again. ABT repairman adjusted temperature calibration but refused to troubleshoot any further. Just ruined another dinner. Thanks Dacor and ABT for your unreliable product and poor service.