WTW6340WW0 - When washing clothes, on the last spin it stops and gives an UL error message. I make sure all the clothes are level and restart at that point but still the UL error message appears and water starts leaking from the underneath of the machine. Weve reset the and unplug the machine but no difference. Please help on what else to do.

Replaced the “brain” twice. No hot water for 2-4 days each time, waiting for part to arrive. Now I have to replace the nylon drain valve because it won’t shut off. Gonna use brass replacement. Fortunately I have it drain to a sump pump so house isn’t flooding. Don’t buy Whirlpool water heater from Lowe’s unless you enjoy this kind of thing. Consolation: the folks at the help line always answer the phone and are knowledgeable. And they’ve heard these same complaints over and over. One guy even said to buy AO Smith as they are made in Tennessee instead of China.

Purchased new Whirlpool washer from builder - never worked. Serviced 4 times by Whirlpool - does not wash, does not sense, shakes like crazy. No resolution from Whirlpool - worst customer service experience.

The Whirlpool fridge we bought kept freezing food in the fridge. Local technicians couldnt solve the problem after replacing some parts. They called Whirlpools technical person and found there are other similar cases for this model. We were told to wait till they solve the engineering issue. We require to replace another model. Whirlpools customer service Supervisor whose name is Alisha talked very arrogantly and hung up on us. In one word, bad products, bad service, bad people. We will stay away from any Whirlpool product in the future.

Switched to bottom freezer and love the size. We all use and enjoy the filtered water. Whirlpool has proven to be a manufacturer I will always consider when making major appliance purchases for performance, service, and dependability.

After 16 months the Whirlpool refrigerator Model number: #WRT311SZDW00 goes out. While trying to use extended warranty Whirlpool states it will be 4 to 6 week before a technician can come out. YES- Weeks not days. Now Whirlpool states they are unable to find a technician in my area and in order to get it fixed I will need to hire the tech and seek reimbursement from them for the repair. However prior to the repair they will need to approve the repair. In the mean time I am renting a refrigerator at my cost. They lost a customer for life!!! Question- What is the purpose of the warranty? Model number: #WRT311SZDW00

Whirlpool Water Heater FG1F4040S3NOV - I had this water heater installed in 2005 by a professional plumber and every year since like clockwork, I have to replace the gas control valve/thermostat. Last year, Sears came and did the work and made their arrangements to have the part replaced. This year 2012, March 9 my gas control valve went again. The unit is not even a year old and broke again. Unfortunately, the six-year warranty is up on the hot water tank. I called Whirlpool two times. The first time, the guy told me that the warranty was up and hung up on me! The second time, the guy would not honor the replacing of a part that is not even a year old yet. The money I spent over the six years making repair on it, I could have bought a new one. This company is nothing but a bunch of **. Is there anything that I can do? I have paid to replace this five years in a row.

I purchased a 50 Gal. Whirlpool gas water heater on Saturday, 12/31 to replace a 20-yr old unit that had failed. The unit was installed that day and it started right up but I noticed the burner had gone out about an hour later and the status light indicated FV Sensor Lockout. I tried calling Whirlpool but their customer service was closed. I tried troubleshooting myself using manuals and Internet forums without success. Everything I could find indicated that an FV Sensor failure could not be repaired and would require replacement parts. I called Lowes and was told they could not help me and I would need to talk to Whirlpool.I called Whirlpool again Sunday, 1/1, but they were closed again for the Holiday. I called two plumbers and both told me that the Whirlpool units were problematic and that if they did come out, there would be little they could do except charge me a lot of money and recommend parts to order as Whirlpool does not let them stock parts. Both plumbers also suggested that I consider buying another brand.So I went to Home Depot and purchased another brand with similar specs. I installed it that day and it fired up right away and has been running fine ever since.I talked to Whirlpool on Monday, 1/2, and they told me they would not issue an RMA for a unit that they considered usable. They also told me there was an FV Sensor reset procedure that they would have walked me through had I been able to talk to them that would have bypassed the sensor until a replacement could be installed. I told them that if they would publish this procedure in their manuals or on the Internet, I would have certainly done that. Im now fighting with both Whirlpool and Lowes to get a resolution to this problem. Im not sure about other Whirlpool products but their Water heaters seem to be very problematic.

I bought a 40 gal. Whirlpool water heater from Lowes. It was just outside the 6-year warranty when the pilot light went out and wont relight. I called Whirlpool. They are about as worthless as box of rocks. They refuse to replace the thermocoupling free of charge or at least no shipping charge, when they know in fact there is a problem. It was because no class action lawsuit was filed. Its too bad for the customers. I wished they would have just said: “lady, please take your business somewhere else.” It would have made things easier. Or, better yet, they should just put a sign on their water heaters in the store stating: “If you have problems with our product, sorry about your luck. ** you and have a nice day.”

Whirlpool sent out a repairman to fix my range. I had it for 3 years, and one day I was baking cookies in the lower range and boiling water for pasta on the top left burner. There was a very loud pop, a bright flash in the glass top where the back left burner is, then there was no power to the range or oven at all. No clock display, burners would not work, oven would not work, nothing. As if it were unplugged. Of course, my warranty was about to expire in approximately 6 days (go figure) so I called the customer service line for repair. After 2 hours of back and forth with 3 different people, I finally had a technician coming out 4 days later. He shows up, takes about 35 minutes to get the glass top off, then says to me that he needs to order a part for it. This will take a few days. Ugh. Fine. 3 days later, part comes in. Same guy comes back out, fixes it. Ok.Up and running fine for about a year and 2 months. Then... POP! It happens again. Same scenario, different menu. (I was cooking breakfast). Now, warranty has run out and I have a $1,300 piece of scrap metal sitting in my kitchen. Worthless. My old KitchenAid stove was great. Had that thing for 13 years. Never a problem outside of replacing a $68 heating element one time. I paid $450 for that range. Tossed it out for this bells and whistles newer stainless steel glass top range/double oven. Regretting that tremendously. Whirlpool will be on my do-not-buy list for any appliance from now on. Didn’t even last 5 years. Oh did I mention the service call cost me $85? Yeah... Garbage!

Have read several reviews on Whirlpool refrigerator. Short and sick. I had my refrigerator less than a month. Broke down, been getting NO satisfaction from Whirlpool whatsoever. I WILL NEVER BUY A WHIRLPOOL APPLIANCES AGAIN. Service is terrible. Months have gone by, and its still sitting in my kitchen broken. They are taking their sweet time fixing it. Garbage. DONT BUY WHIRLPOOL, save yourself the hassles.

Whirlpool provides free replacement parts to repair this design problem but wont pay the service charges to repair their design problem. I purchased a KitchenAid french door style refrigerator (KBFS25EWMS10, SN K31902118) and it leaks water on the kitchen floor. At first I just mopped it up but later discovered they have a design problem in their drain system and water backs up into the freezer dept and eventually on to the floor. Customer Service provides free improved replacement parts for this design problem but wont pay the service charges to have the parts replaced. Simply put, Whirlpool/KitchenAid do not stand behind their product quality, instead they pass the problem and service charge cost for their design problem on to the consumer. Beware of this appliance supplier!

We purchased this dishwasher (Gold Dishwasher WDF60SADB) because of its low 49-decibel rating. It goes over 60 decibels regularly and occasionally up to 70 during operation (not including drain noises which cannot be controlled by the dishwasher). We used a tablet app to confirm. Decibels are not linear, they are exponential. 70 decibels is what your average shower or dishwasher sounds like. 50 is about as quiet as a refrigerator. You have to talk over this dishwasher. And yes there was a big price difference between it and Whirlpools next loudest rated washer.Whirlpools customer service says they will not replace or repair based on sound ever, only for functional failure. Bottom line, dont pay any attention to Whirlpool sound ratings. They dont stand by them and do not consider gross overages a defect. Fortunately the retailer (Lowes) does stand by what they sell and will trade for any other machine by any other manufacturer. We have only good things to say about Lowes in this process. This machine arrived Wednesday, and we pick a replacement Sunday. It will not be a Whirlpool. I will never buy a Whirlpool anything again. We said it will do X but we dont care if a brand new one wont is no way to do business.

I purchased a total of four Whirlpool appliances in June of 2008. Almost thirteen months after the installation of all four appliances, I experienced a problem with the control panel on the Gas Range GW397LXUB, and a sensor control problem with the Microwave GH5184XPB5. Fortunately, Whirlpool agreed to repair the appliances at no charge because it was so close to the end of the warranty. The microwave was an easy fix and simply had to be unplugged, reset and plugged back in. However, the entire electronic control panel had to be replaced on the gas range. Several of the buttons simply stopped working and I was only able to bake at 350 degrees. Again, almost thirteen months after the installation of the new control panel, it happened again. Same buttons stopped working. When I contacted Whirlpool, they refused to replace the part because I was no longer under warranty. Whirlpool refused to admit that there was a problem with the control panel, so I guess it was a crazy coincidence that I experienced the exact same problem on both. I filed an official complaint with Whirlpool in hopes that if enough people do so, they will issue a recall. I am now experiencing a problem with my refrigerator ED5FHAXSB03. The fan vibrates so loudly that you can hear it throughout the entire house.

The oven was brand new and the computer went out with the warranty. Replacing the computer, with labor, was as expensive as the range. I have owned several similar ranges made by other brands and have had no major complaints. However, I will never purchase another Whirlpool product again!

A couple of years ago, we had 2 natural gas hot water heaters installed. We immediately had a service call to replace the thermostat on one of them. Then recently, the other one had to be replaced because of the leaky tank. It was still in warranty, and we had to pay $425 for the old one to be removed and the new one installed. Now, this one has a bad thermostat and the A & E Factory Service is coming tomorrow to install the new thermostat. We have been inconvenienced by this for a couple of weeks as we have no hot water in the master bath. We were just lucky that we had one hot water heater working in the other part of the house. I think that Whirlpool should have paid the $425 for the installation as the original hot water heater was in warranty. Now, I hope that tomorrows visit will be covered by the warranty. Next time we need an appliance, we will not be purchasing a Whirlpool.

Bought this front loader washer. It is unbelievable this thing will not wash a load properly. It refuses to spin at high speed because it is constantly out of balance even if you only have one or two garments and it keeps saying add more garments. As you keep adding garment its even worse literally. If you have anything that is heavy in this like a towel or a pair of pants or a hoodie or something like that for sure youre going to have to wash one thing at a time. I will never buy another one. I wish somebody would sue the living crap out of him for this piece of junk. I want my money back...

The American Standard 95% 2 stage variable furnace is by far my favorite furnace to install. I know exactly what to expect from this furnace and I have had zero factory issues with this model. Outside of making a few sheet metal transitions this American Standard standard 95% furnace was very easy to install as well. And like the 2 stage variable … no factory issues.

Purchased Model # wtw5000DW0 Jan 3, 2015. Aug 15, 2015 started leaking water. Certified technician came to repair. Aug 17 - new transmission. Sept 3 replaced new transmission with another new transmission. Sept 8 called master technician at Whirlpool, needs new clutch assembly. Both technicians stated they dont know what is wrong with the machine. Sept 10 new clutch assembly and agitator replaced. The machine still makes a horrible grinding noise and is unusable. The technician has replaced everything but Whirlpool says it is still fixable. The Master technician has no idea what is wrong with my machine yet he refuses to call it broken. I have been without a washing machine for 3 1/2 weeks. They refuse to offer a return authorization number. I have spoken to a Supervisor on the phone. She states the warranty is for repair. They wont admit their product is a piece of garbage. They have lost a customer. She stated she will put my complaint in a file.

My Whirlpool washer is lasted 15 yrs and is very good at cleaning clothes, it is also easy join my water bill. I purchased mine at Home Depot. They also finance. I hope you enjoy your purchase. I know I do.

GW399LXUS range is Dangerous. Sheet metal cuts your fingers. In over 6 months, Whirlpool has failed miserably in fixing the problem. Bad replacement parts. Incomplete parts shipments. A dozen service calls. The local independent service companies are the only ones who have acted professionally. Other than the poor people who answer the complaint lines, nobody at Whirlpool seems to care. The product is poorly made and the product support is not competent. The range may have the features that we wanted, but who needs all this headache?

We have put hundreds of dollars in service calls and parts on these items. I bought them because they were supposed to be good choices. NO way! I have replaced motherboard in washer, belt and sensor in dryer, the washer has had mold in it since week one. Ive tried to clean it but just keep coming back. All my clothes smell like mold and I already have lung problems! Cant afford to buy new right now. But last month my dryer started making terrible banging noise and so repairman says I need another part! I bought the part more money! Just to have it quit again! Now the barrel split! I dont think I should have to pay the money I did for this set and surely shouldnt of had to replace so many things that went wrong or put up with the sewer smell from the washer!

I do not know if my mail would be read or not, but I am writing it just to my satisfaction. I am a doctor (dentist) living in Haridwar. I had bought a Whirlpool fridge around 2-3 years back. I am not sure about the date. I have the bill. I will have to check the exact date. So around 3 months back, the fridge stopped cooling and I lodged a complaint in your customer care center. The engineer turned up, and he said that the compressor was not working and the company will change it. We only have to pay for the gas to be refilled. I said ok. Everything went well for nearly 3 months, then again one fine day, the cooling stopped. I called the companys customer care, and they gave me a complaint number and customer satisfaction number. But nobody turned up for 2 days. I called and called, then after much calling, a guy from the company came and said that the compressor was not working and they have to change it but that it will not be possible for 4 days. After 4 days, he will come.Sir, can you live without a fridge for 4 days and not getting the guarantee that it will be ok in the next 4 days? So, I went to the market bought a Kirloskar compressor, got it fixed, and got the gas filled; and the fridge is working fine now on the same day. This cost me nearly 4500rs, but I am happy that I have solved the problem. Till date, nobody has come to see my problem; and to my utter surprise, I received an SMS from Whirlpool that the customer is not willing to pay. Ha ha ha. My fridge is a double-door 280-liter fridge. What should I do?

We purchased a Whirlpool Gold Series dishwasher from Lowes approximately 2 years ago. Serial P32105232. We noticed a dark stain coming up in the hardwood floor. It was a water leak from the dishwasher appears to be from seal when water cycle leaves unit. This has caused over 70k damage to our home. Ruined entire hardwood floor kitchen cabinets warped so all need replaced. Our insurance company has made a disaster after owning home 10 years. Custom cabinets that match the laundry room as well. No to mention. The jackhammer used to bust up 800 sq foot of flooring and the concrete dust in our entire home. Please advise recourse.

We purchased a Whirlpool refrigerator from Conns Appliances on 2/2/12. It worked fine until about 2 months ago. Then it started freezing food in the refrigerator. We called Conns, and they sent a technician to replace the thermostat. A couple of days later, it was still freezing food. So we called Conns again. They sent a second technician. He called Whirlpool tech support, and they told him to adjust the position of the thermostat sensor. A couple of more days went by, and food was still freezing. The problem had gotten even worse.I called the manager at Conns and suggested that we should consider replacement since the previous 2 technicians were unable to solve the problem. He sent a third technician. Tech #3 called Whirlpool tech support and re-adjusted the sensor. He said there wasnt a lot they could do and that if I wanted to get it replaced, I would need to call Whirlpool.I called Whirlpool Customer Service and explained everything that had happened. They told me they would need to send another technician. I asked why, since 3 technicians had already looked at it. She said there were different levels of service and they would have to send someone from their authorized service company, as if Conns is not authorized. I asked if this problem was common in this model of refrigerator. She said she could research that if I could hold, so I said ok. After being on hold for several minutes, she came back and said she couldnt find any record of this being a repetitive problem.I didnt have a thermometer, and I thought if I had more concrete evidence of the problem, then maybe they would replace the refrigerator. So I put a glass of water in the middle of the top shelf. Within 24 hours, it was frozen solid as an ice cube!Technician #4 came and called Whirlpool tech support. This time, they told him that this had been a problem ever since this model came out and they had a fix that had been on the books since day 1. So the customer service lady obviously lied to me. Technician #4 stuffed a piece of Styrofoam in the hole where the air comes from the freezer into the refrigerator and he re-adjusted the thermostat sensor. I asked if we could just replace the unit and be done with it, but he said we had to wait and see if his fix worked.I went to Ace Hardware and bought a refrigerator thermometer. Two days later, we had frozen strawberries, frozen lettuce, frozen milk, and even the meat and cheese were freezing. My thermometer said temperature was 32 degrees. I called Whirlpool back and insisted that they replace the refrigerator. They told me The unit was not authorized for replacement and they needed a 2nd opinion. I was very angry. I told them there had already been 4 opinions and a 5th wasnt necessary. I wasnt getting anywhere, so I asked for a supervisor. They transferred me to someone named Sue. Sue told me the same thing - not authorized, need a 2nd opinion. I told her that I work at The Mens Wearhouse and that if a customer spent that much money on a suit and had trouble with it, they certainly would not have to bring it back 5 times to have it re-tailored. I asked to speak to her supervisor. She said, Sir, my supervisor doesnt speak to consumers. I could not believe my ears. Where would they be without consumers? I was so mad I hung up on her.Later, I realized I had no options and called to request the 2nd opinion. I was told that the technician could authorize the unit for replacement. They also told me I couldnt get a technician for a week because their technicians were all booked up repairing their faulty products. I had no choice but to wait. I moved my thermometer to the bottom of the refrigerator to see if the temperature was the same there as on the top. The temperature there fluctuated between 28 and 34 degrees. I called Conns to tell them the story, thinking maybe they would go to bat for one of their customers. They told me this should never have happened and that the matter should be escalated to their home office and that a manager would contact me within 30 minutes. He never called.Two days after that phone call, I went to Conns to speak to the manager. I told him the whole story and told him that if Whirlpool would not replace the refrigerator, then I would have no choice but to contact Discover (my payment method for the original purchase) and dispute the charges. I pointed out that even though it should be Whirlpool paying for it, his store would take the hit if Discover reversed the charges. He called someone and told me a Conns service manager would contact me within 48 hours.More waiting. Technician #5 came. I told him he was to authorize the unit for replacement. He said he couldnt do that and that Whirlpool tells all their customers that just to get them off the phone. He re-adjusted the temperature sensor and left. I was livid. Now the problem went the other way. The temperature wouldnt go below 50 degrees. We filled an ice chest with food and ice and began living out of it. The Conns service manager called and said he would have to send a technician. This would be #6. I was very angry with the service manager and called Discover to dispute the charges. Discover opened an investigation, sent a letter to Conns (and maybe Whirlpool, Im not sure) and issued a credit to my credit card account.#6 came and re-adjusted the thermostat sensor. The next morning, he called to see how it was doing. The temperature was still around 50 degrees. He wanted to come and adjust it again. I told him to get the unit replaced! So he submitted paperwork to request a replacement. He called back and said that he felt sorry for us because he knew we had a 3-month-old baby in the house. Since the replacement had been requested, Conns wouldnt pay him to come again; but he said he would come on his own time, on his lunch break, and readjust the sensor in hopes that it would get us by while we waited for a replacement. He said it might take 3-4 days to get the replacement. I told him he could come, so this was technical visit #7. He adjusted the sensor. The next day, the temperature was still 50 degrees.I called the service manager at Conns to confirm that they had requested the replacement. He said the paperwork was submitted, that the home office would review it, make a decision, and that we should know something in a couple of days. That was on Wednesday. On Monday afternoon, I called him again. He said the paperwork wasnt submitted to home office until Saturday and that he was expecting to hear from them by end of day Tuesday. In the meantime, we were still living out of an ice chest.I had already determined that Whirlpool wasnt going to help me, and now, Conns was giving me the runaround. That afternoon, I was working on a project at work with a lady who was fairly new in our company. Turns out she used to work at the Conns home office and she knew people in high places there. She called a VP on my behalf. The next morning, I got a call from the VP telling me that I could get a replacement. I dont think I would have gotten my replacement if I hadnt bumped into the lady who used to work at Conns.I called Conns store, and they said a credit had been issued and I could come to the store and pick out whatever I wanted up to the amount of the credit. I knew I didnt want another Whirlpool. The selection was very limited, but I found a Frigidaire that I thought might work. Then they told me I would have to pay extra for an ice maker, even though I had bought the ice maker for the Whirlpool that was being replaced. I argued with the manager until finally he agreed to give me the ice maker, delivery, and installation.Yesterday, Conns called to tell me they were coming in the afternoon to install the refrigerator. They had the audacity to ask me what was the matter with the unit they were replacing! They did come and replace the unit. But wait...Thats not all! This morning, the ice maker had not made any ice, even after running all night long. Conns sent a technician today, and he said all of the parts were not installed and it was preventing proper water flow. He is coming back on Tuesday to install the missing parts. So we still arent done. I dont know if Im more angry with Whirlpool or with Conns. Whirlpool did not honor their warranty and Conns got stuck with it. But then Conns provided poor service too. I got stuck in the middle, and it still isnt fully resolved.

We have had this washer for a year and the longest it has run before breaking down is 3 weeks. Since it takes longer than that to get a repairman out to look at it and another 2 to 4 weeks to get parts, it has run less than half of the time we have owned it. This thing is a hunk of junk. Dont ever consider purchasing one of these lemons.

Easter is in five days. Our dishwasher purchased in December 2014 is not working. It has been broken since December 2015. Repairmen have been here THREE times. We were told that our warranty only covers parts and repair. Our dishwasher does not wash dishes. We went for a more expensive model and it didnt last a year. Whirlpool, remember your commercial?

Takes 2 or 3 full cycles to dry small load. Big disappointment, drying is such a horrible experience since the clothes never dry when I expect them to. Not satisfied at all.

I have had my refrigerator for more than 10 years. It is a standard refrigerator with no extras and I have never had any problems with it. I think things that dont have too many extra built into them are better with not so many things to break down.

I have always had a whirlpool dishwasher and have always been please until my last dishwasher. The part that holds the soap and liquid stuff has broken and also the part that holds the silverware. Been really disappointed in this product.

We purchased our Whirlpool Water Heater about 2 years ago. Three weeks after we bought it, it stopped working; the pilot light would not light. They sent a tech out to replace the thermostat and the thermocouple. Now, it has stopped working again. My husband and I have spent nearly 20 hours on the phone with the WP customer service girls and replaced nearly every part but the tank it self. We have not had hot water for over a week and are at wits end! My husband finally got them to authorize us to get a new water heater from Lowes after they told him there was nothing else they could do to help us. Ive read pages and pages of complaints from other people having this same problem. Why do they put you through all the torture if they know its not going to work? Its very frustrating! We are almost to a point of ripping out all the gas lines and going electric! Will the new one we picked up today have the same problems? Only time will tell!

My experiences using Whirpool ranges and ovens have been very positive. As a matter of fact, that is the brand preferred by my family through several generations. Durability, reliability and warranties have been the main features we have found useful. Most of the ranges and ovens have been replaced at home, always with Whirlpool brand, but with added improvements that manufacturer come up with, in order to integrate our devices to the latest technologies. I would recommend this brand to the readers, friends and neighbors.

Size was greatest consideration, then cost. Next was power consumption. Quality claims were of no value, since ALL are made in China/Korea. Korean made would be a better choice than China. Am satisfied, but not greatly, as refrig. bottom freezer died a few days out of warranty. YouTube video had my exact refrig. so fixed it myself. Bottom freezer drawer keeps coming off its slides, but I live with it. Top refrig. section freezes things on top shelf, but 2 and 3 shelves down, temp is 39 to 42 = cannot get even temp. As a former inspector, I know about air circulation, crowding.

Top load stackable Washer dryer - Model number YWET 3300XQO. I had two floods with the same washer dryer unit. The first flood occurred in April 2012 and thousands of dollars were paid to repair the home that was damaged due to this flooding. The second flooding happened in October 2012 with the same machine at the same home. This time there were other Whirlpool owners that also suffered with the same issue with the same model Whirlpool machine. Whirlpool acknowledged that they will pay out to fix the damages and the deductibles but to date they are simply playing games on paying out. This is 15 months after the first flooding happened.

I bought a new washer and dryer 2 years ago, it was built by Whirlpool under the Kenmore name plate. In the first two weeks we had them come and service it as it was very loud in spin mode. The serviceman said they were all like that. Now, two years later, it is so loud you cannot even carry on a conversation while in the spin mode. Called for service again. After two minutes he says, You better buy a new washer, this one will cost over $800 to fix. Never will buy another Whirlpool appliance or Kenmore again. Buyer beware!

My Whirlpool refrigerator model #ED5FHEXV001, serial #HR0248 - I have spoken to a couple of reps on the phone. I am very dissatisfied because it was like one rep I spoke with on the telephone advised me to buy an extended warranty and at that time, the company would consider alternative ways to deal with this complaint and perhaps replace the refrigerator. I did not want to pay an additional $100 for a warranty, unless the company would guarantee me a solution, preferably my money back. I did not really believe the warranty would help me after the warranty was expired. I would still have the same problem and I feel that in the event after the extra warranty expired, the company would tell me I should have kept the coils clean, which is my complaint. There is no way to keep the coils clean. I guess blowing out the residue, then all that residue material would end up all in my house. Also, very important, there have been 3-4 technicians to my house the first year. I was told various things to do, such as adjust the refrigerator to a lower setting and freezer to a little higher setting. One tech actually replaced a part? The second tech said he would clean the coils. The last tech told me the problem was my coils had to stay clean. My question is, how the heck is that possible with the coils on the bottom of the fridge and susceptible to a lot of dust and dirt, unless I move my fridge everyday? Most people do not expect to have to clean under the fridge each day and the coils would still be dirty anyway. It is very dumb that the coils are not on the back of the fridge. With the fridge coils on the back, I have never experienced this problem. Please advise what my next step would be. Thank you.

We purchased our side by side refrigerator from Lowes. When it was delivered, we noticed the freezer door was rubbing on the ice maker and would not close properly. The refrigerator was replaced. Then about 10 months later, the water dispenser stopped working. Service came out and said the water line had ice in it (we do not keep the freezer on high). They replaced the water line in the door. About 6 months later, after the unit was out of warranty, the same thing happened. We called Whirlpool and they said there was nothing they could do, because the unit was out of warranty. I cleaned out the water line tubing myself and the unit worked again, but the problem occurred again several months later and it does not seem right that the water dispenser line should keep freezing up. In addition, every two months we have to take the ice maker apart because the ice will no longer dispense because of an ice buildup in the ice cube container. We used to think that Whirlpool made reliable products, but with these problems and Whirlpools unwillingness to correct the problem, we will never buy their products again. They have lost a long time customer because of their products now and their customer support.

It is a top of the line washing machine. I have had it for almost four years. It is the best washing machine I have ever had. I have really enjoyed it, because; I am able to wash my comforters in this washing machine.

My KitchenAid side by side refrigerator/freezer is a beautiful thing, shiny steel surface, gleaming white inside. However, its made poorly. The ice cube maker compartment broke and the replacement came without any installation instructions. It was hard to figure out and I broke it. Now, everything in the refrigerator is freezing and changing the temperature on the digital panel makes no difference. McKinneys appliance, where I bought it, no longer has a refrigeration technician and they referred me to Whirlpools 1-800 number where I supplied some information and sat in my chair on hold listening to music for a half hour before hanging up.The recording on the phone suggested their online chat where I was asked the same sorts of questions and was told I would get the answers I wanted by paying $5.00. I had no idea what I was getting into but I didnt pay, just terminated that inquiry. Feeling cheated by the company whose product I had mistakenly purchased. Im now running the risk of a technician visit, sometime between 8 am and 4 pm a couple of days from now. I have to be prepared to wait around all day for somebody to look at my refrigerator, charge me a lot of money and, from what Ive read online, potentially see the problem return in a very short space of time.

I just purchased this washer Whirlpool Cabrio. Im experiencing the worst with it because it seems to take forever for it to wash. I came to look at reviews to see if other people were having problems like me. My issue is when I put it on quick wash it seems to say 41min then to 56min then goes down again and up again. I feel like its using more water as many times I hear it filling and washing. I didnt see anyone complain on that part but for the price its a big headache and upsetting because I spent that much thinking you get what you pay but I rather have the old washer I had than this. If anyone has had this issue please let me know and was it an ongoing thing. Not sure if you can comment back to reviews but shame on them to see all these unhappy people and not trying to make things better for them. I wish I read reviews before getting it. Yes it looks good on the outside but is crap.

So far this washing machine has been perfect. Its a top load not front load which I prefer. Im not a big fan of how it locks and I cant throw other stuff in once it started. Other than that Im very satisfied.

The Whirlpool engineers need to go back to design room sober on this machine. It is only a year old and still I have to run one load two sometimes three times just to get clothes clean. How is this energy-efficient? I have tried all of their so-called remedies. Paying such good money for a lousy and lazy appliance is hard to swallow!

I have had my stove for 3 years and it works fine. However since I have become a grandparent, I have been extremely worried about the chance of being burnt. the problem is once you turn off the burner, it doesnt look any different than it does when not in use. It stays hot for a very long time however. Hot enough to burn or melt anything. There is no blocking a child from reaching up and touching it. I have placed a loaf of bread near it only to have it melt down the side. The burner didnt look hot at all. This was at least 15 min. after turning off the burner. Im not trying to cause issues but I believe this is a real danger, not only at the risk of someone getting a burn but also to the point of an entire family losing their home or even their lives. A simple flammable item being knocked over could start a fire. I ask that someone look into these risk.

So, I have a house full of relatives from out of town staying over and as luck would have it, my Whirlpool water heater (model # BFG1F4033T3NOV) which I had installed 15 months ago, decided to stop working. The pilot light went out and would not stay lit no matter how long I held the red restart button. I called Whirlpool customer service and was informed straight away that their computer system was down and they wouldnt be able to order parts if I needed them (great start right?). I explained to the woman on the phone what my issue was and also told her that after searching online, Ive found that this is a common failure with these hot water heaters that Lowes sells where the thermal couple is defective and needs to be replaced. She began to inform me that before any parts was ordered (which she couldnt do because the computers were down), I would have to clean the vent openings on the bottom of the HW heater. No big deal. Then, Id have to have my gas line pressure verified by my gas company (what?). If both were found to be fine, Id have to confirm that my flue is at least three feet above my roof line before they would send me parts to repair my unit. This is about where I lost my mind.I run the RMA/Customer service department in my company and if anyone has issues with our products, we ship first and ask questions later. How can a company with known defective products give their customers the runaround and basically tell them that they are screwed until they can take off time from work for a gas co. to come to their home and will also have to have flue replaced before theyll warranty their product?! Whirlpool should be ashamed of themselves and Lowes should distance themselves from such a crappy company with substandard products and shoddy warranty practices. Ill never buy another Whirlpool product as long as I live and will warn anyone away from this company.

Purchased the machine in 2008 for $800. I did not have any problems (wash 3-4 loads/week), pleased with the washing until July 2015 when the machine was spinning out of control and the machine moved approx. 1 foot across the floor (thank goodness I did not have it on a pedestal as it may have tipped over). I canceled the run. This was a fine washables load of 5 sweaters placed on a medium spin.Scheduled the Whirlpool authorized service tech to come out and fix. He indicated there is extensive repair required and would cost approx. $1800. And indicated he has seen this failure before and it is due to the plastic parts inside. Also, he has seen these washers last about 5-7 years before replacement. Wow, last washer I had was a Maytag and it lasted 15 years costing 1/3 the price of the Whirlpool Duet. Now perplexed on what to buy, called Whirlpool Customer Experience Center to register my complaint and asked if there were any updates to the product that would avoid this failure. The center indicated there are updates but they are confidential and did not know if this failure was addressed.

In 2007, I purchased two 30 gal. Whirlpool Flame Lock water heaters (Model: FG1F3030T3NOV) from Lowes for two different homes that I own. I started having trouble with one of them after about two months. I replaced the thermocouple several times, with each one working only about a month. After that, Lowes replaced the complete burner assembly and that, so far, fixed the problem.Now, the second one has (1 Oct 11) gone out. The local Lowes told me that they are out of the burner assembly for this water heater. I called them this evening and was told that they didnt know when they would have the part, but to call back about every other day to see if they had received the burner assembly for this water heater. They said that it could be from two days to two weeks before they may receive this part!In 2008, I also purchased a 40 gal. Whirlpool Flame Lock water heater (Model: BFG1F4034T3NOV) for my house and no problems so far. In 2007, I even recommended that a friend of mine purchase and install one of these in a home that he owned. He did. I helped him install it and it later had the same problems! I am now needing a water heater for my workshop. What can I buy thats dependable?

After reading all reviews online on the lid of the Whirlpool Cabrio Washer, it upsets me that there has not been a recall on this. Our lid has snapped & has to be held down until the lock light comes on. Often times during the cycle it must sense the lid is broken & thinks it is not locked & sets the load off line. I have to pause the load & then reset the load & hold the lid down tight until it restarts.

I own a Whirlpool Cabrio washer, model #WTW7800XWO. The lid to the washer has completely detached for lack of a better word. It literally blew-off during the spin cycle and is hanging on by one hinge. My husband is disabled and I have had to go without using the washer for several days, waiting on a repair person not to mention the expense that will be incurred.This was a very potentially dangerous situation. My washer is barely older than one year. To add insult to injury, when I contacted the customer service department, I was told I would have to purchase and replace the lid or pay $299.00 for warranty insurance to have it covered because this is not considered a Quality Control issue.The service person has told me that both hinges and the lid will have to be ordered and replaced, leaving me without a washer for several more days. No one has been able to tell me why this happened. I fear this happening again after repair and do not feel safe with this washer. I would appreciate a response as soon as possible.

I bought what I thought was a great washing machine. It is a top loading Cabrio from Whirlpool. The machine leaves white residue on all my dark clothing. It is a disaster. I am following washing instructions exactly, using HE detergent, loading the right amount, I even tried using PODS. I tried different temperature water, different cycles of washing and spinning and the same thing happens. I had an old Maytag that broke that cleaned beautifully. This thing is a piece of garbage and I would love to send it back if they would let me. DO NOT BUY IT. I AM BEGGING YOU, YOU WILL BE VERY UPSET.

Do not buy anything from Whirlpool. This company needs forced out of business. Everything breaks down within weeks or months. I bought a fridge, dishwasher, and a washer dryer. Within 16 months they all went to the trash.

This is our second Cabrio w10550273a. The first one was just as bad as this one. It was replaced under an extended warranty we bought. This washer just like the last one constantly gives a UL code. Thought the washer and load are level.

The washer is only a couple of years old. It does the job but its not something wonderful or great. The previous one was a Kenmore but it was built by Whirlpool. It works. Thats all I can say about it.

Good microwave and will have 1100 watts Of use for TV dinners and warm up food. Do well and goes well. Please use this as well to warm up TV dinners smaller than most. Test them and see what is best. Go.

Buyers beware! I have had the Cabrio top loader washing machine for less than 18 months and it is already giving me problems. During the wash cycle, it sounds as though the gears are grinding to the point it wakes my family up two floors up! The spin cycle is a joke. The washer sounds as though it is going to spin off into another room! When I called Whirlpool, they told me to shut the circuit breaker. That might reset the computer. No go which I figured as much. I have had washers that lasted 10 plus years with no problems. It is not worth your time or your money. Never again, Whirlpool!

I purchased a new Whirlpool Cabrio Platinum washing machine 2 years ago. Do not like it at all. Does not get my clothes clean. Pulls threads in my clothing. When I wash clothes on the normal cycle they are barely damp when the cycle is finished. When I use fabric softener it leaves blue spots on my clothes. I cannot afford to buy another washer so Im stuck with this one until it breaks. I would NOT buy another Whirlpool high-efficiency washing machine ever again.

Six warranty visits and the fridge still doesnt work. Cools to around 44 degrees in the upper part and lower part barely freezes. We have gotten sick from food left in the fridge after two days from the grocery store. It is now approaching two months without the use of our new refrigerator. DO NOT buy a Whirlpool. Apparently there was a manufacturing defect. We are now learning that a $2,400 fridge doesnt seem to be able to be fixed by factory-trained specialists.

Bought this model #WTW8500DC from Lowes in 2015. Ever since had problems. Stopping in the middle, not starting, recently keeps running water, lid lock issues, had multiple service calls and multiple hardware changes, paid extra for extended warranty from Whirlpool hoping that within a year all problems would be gone after so many repairs. Boys I was wrong. After spending around $1200 between this machine and the extended warranty, three year later after the warranty expired now I am stuck with this non-functional piece of junk and looking for another washing machine. Would love to hear from Whirlpool if I stumbled upon a lemon, or three year is expected life of their $1000 plus machines.

My refrigerator is 6 months old and already has rust and leaks. I am told it is because I live too close to the beach. Do not buy their sub-par products which come along with absolutely awful customer service. Will never purchase anything Whirlpool again.

I have always liked Whirlpool products but it seems lately they are lagging in this department. My washer/dryer combo each separate I dont feel are doing the job they should be. Washer is the bigger problem. Softner dispenser not distributing the softner correctly and now I have to clean out after each use. These are about 10 years old now. Is not spinning all the water out and not at all sure if clothes are getting clean. Most of their products usually lasted much longer back a few years.

I purchased a Whirlpool brand refrigerator from PC Richards two months ago. The compressor has stopped working causing my refrigerator to stop cooling and in turn all my food has gone bad. I reached out to P.C. Richards and they immediately credited me a check for the full amount of the refrigerator, with the option to get a new one delivered to me. I asked P.C.R. customer service if I would be credited for the food in my fridge and they suggested I reach out to the manufacturer. I reached out and, to my dissatisfaction Whirlpool will not credit me for the loss of the food in the refrigerator. I am completely disappointed. As I mentioned before I purchased the fridge 2 months ago. This is clearly a manufacture issue. I purchased a lemon and I am getting no support from Whirlpool customer affairs department. As a person who works for a reputable company in the purchasing department, I will see to it that we never do business with this company again. A company that doesn’t stand for anything or even compensates their customer for a faulty product should not be in business. Forgot to mention the customer affairs rep. Offered me fifty dollars for my troubles. Which I turned down. Besides the fact that fifty dollars will not cover a third of the items in my fridge, money is no longer the problem. It is the lack of customer service for purchasing one of their appliances. I am completely disappointed and will never recommend or purchase this product again.

I have the 4.3 cu. ft. washer. This washer worked OK, but the lid lock does fail after about one year if the washer is in an environment where moisture may be present.I noticed the lid lock not working all the time about two months before the warranty expired. If this happens, call the warranty department immediately. After checking the ground wire and resetting the washer power over and over again, the lid lock finally stopped working completely. Here is how to fix it:There are two screws on the back of the top portion of the washer. Unscrew them from the silver straps. The washer lid will now push forward and up and off. Prop it up with a stick.Unscrew the two screws on the lid lock and start taking it apart (after reading this entire review). Be careful not to lose any parts and be sure to know where everything goes for re-assembly. Take pictures if necessary. Take the lid lock completely apart including any small pieces.The plastic slide needs to be cleaned. It has a spring that may fall when you pull it apart.The metal contact points inside the lid lock mechanism need to be cleaned. Be extremely careful when pulling the red cover off of the housing assembly. Pull the four metal contact points completely out of the plastic assembly. Be real careful with the black plastic slide piece, the metal rocker switch and the switch actuating motor. Use a small file and rubbing alcohol to clean off any green or white corrosion. Make sure to check all contact points.Re-assemble and you will immediately notice the lock switch working better. Re-install onto the machine. Re-install the upper portion of the washer. Start your laundry. Repeat after one year or when the lid lock becomes faulty again. These points should have been made out of a less corrosive material. Poor craftsmanship. Would not recommend.

I bought a Whirlpool water heater in March, 2008. Last time (not sure if its last year or 2 years ago), I had an issue of the water not heating. They have someone came in to replace a part. Recently a humming sound (scary one) keeps on coming on from time to time. It took me some days to find where the sound is coming from, and there it is, my fairly new whirlpool water heater.They said it has something to do with the orifice. Since I am not a handyman, they recommended a service guy to come in, and I have to pay. I wonder how much more I have to spend on this heater? Yes Im saving gas consumption, but it will be spent for service anyway, and I have the added bonus of frustration. It is not worthy having it. I spent $1,400 for the heater and labor.

Cabrio top loading washer - I have had this set for 3 years. The first 8 months it was fine, then came all the rust. I had to go to the BBB and file a complaint as everyone at Whirlpool would not help. Last year they finally replaced the top, and now, its rust yet again. I rinse and dry the machine when I am done using it. The repair man said it was because manufacturers are not using primer and just one coat of cheap paint. What now? Ill see if I can get the lid off and sand it and use rust preventer on it. Never again, I should just junk this piece of crap and Whirlpool should shut down if they cant make anything worth our hard earned money.

Purchased the matching set. Have had four years and need my second service on the machine for issues. It is a top loader and does a good job but the tub is very deep and not made for short people with a few delicate items cuz they are hard to retrieve. I have to use tongs to get them out.

Most of my appliances are Whirlpool - dishwasher, refrigerator, clothed dryer and the Cabrio washer. The washer before this one, I had it for over 10 years and replaced it because of rust (thats another problem with Whirlpool - rust). Now the Cabrio hasnt got all kinds of problems - UL, F1 and jumping. The serviceman asked me for $450 for repair; it included a set of springs for the drum, a new electronic board and a 30-day warranty on parts and labor. Im better off buying a new one (I cant afford at this moment). My wife is scared of the darn thing and refuse to use it so now I have the job of washing and standing guard to make sure the washer doesnt leave the garage. Thank you, Whirlpool - and my refrigerator works fine all rusted.

Purchased a Whirlpool Cabrio washer WTW5800BW0 September 2014. Two years and 8 months later it no longer works. Call Sears and Whirlpool and was basically told I should have purchased a warranty. Whirlpool tried to sell me an extended warranty for $495.00 which is about 80% of the original sale price of the washer. Was told it is my responsibility to care for the maintenance of my purchase. WOW. Way to stand by your product. So now its my fault they sell a product that does not last longer than 3 years. So we tried option 2 - called a repairman. His response save your money and buy a new washer. WOW. A repairman rather lose money than try and fix this washer. Save your money and pass on Whirlpool products.

In 2014, we redesigned our kitchen for two side kick gorgeous looking white fridge and freezer (Fridge was $1099 & Freezer was $1099, plus extended warranty $436.19 CDN.) Within 2 years the evaporator blew. $1000 dollar repair that Whirlpool covered, yay!. BUT 3.5 years later the compressor blew...another $1000. Whirlpools response...Sorry Sears went under and the fridge is 5.5 years old. Whirlpool discontinued the model so no new fridge for us unless we re-do a whole bank of cabinets. Forewarned is forearmed. Stay away from whirlpool. There are better brands. Do your homework! Sue from Edmonton, Alberta

I have a Whirlpool Cabrio washer and dryer combo. Recently, I have learned that the washer has a very common problem with the water pump. I have read amazing amount of complaints about this problem and apparently the company has nothing to say about this. The cost for parts and labor for replacing this pump is about $400.00, almost half the cost of the unit. This is unreal!

I took the time to read the owners manual, and then ran machine (washer wtw5000dw0). Using an affordable HE approved detergent (Xtra), I had no problems. If the washer doesnt fill or drain correctly, look up how to recalibrate it, was easy to do because I did that after transporting it. My clothes are cleaner, and I am using LESS detergent!

We purchased a WRS576FIDM refrigerator from HHGregg in August 2015 and immediately had problems with ice maker and door having condensation on it. I contacted Whirlpool who had a tech come to my house and verify problems. Whirlpool replaced it with a new refrigerator in November 2015 and w/in a week it had awful condensation on the outside of the door, dripping onto the floor and pooling water. A tech responded to our house again and confirmed the problem with Whirlpool. Whirlpool advised they would be sending out two new doors for our side to side refrigerator and said we should receive them within 4 to 6 weeks from late November 2015. I asked Whirlpool to send us a different model because this is the second refrigerator of the same model that has the same issues. Whirlpool refused. I have spent countless hours on the phone with Whirlpool, HHGregg, and waiting for service appointments and my patience is getting thin. I just contacted them today 2-9-16 to inquire about my doors since it has been well over the 4 to 6 weeks Whirlpool said it should take to receive them. The Whirlpool rep on the phone had no information about the status of the doors and said that they would have to contact the service company to inquire more about the status of the doors. He also said that under special circumstances, it may take an additional two weeks for certain door orders. I once again requested a different model of refrigerator or a refund.I tried to get HHGregg to allow me to return the 2nd refrigerator just days after I received it since I was having the same issues as the original one I purchased. HHGregg said they could not since the 2nd refrigerator did not come from them. HHGregg said that they did not know why Whirlpool sent me a replacement refrigerator directly and added that normally the returns go through them. I feel like I tried to do the right thing by contacting Whirlpool for warranty work, but I feel that if I would have called HHGregg I would have been able to get a different brand refrigerator which is what I really desire after all these problems with the Whirlpool brand. I did purchase an entire Whirlpool kitchen set from HHGregg. The only problems I am having is with this refrigerator.

I purchased this washer from Lowes 5 months ago. I did not purchase a store warranty. Started having problems 60 days later. I have to deal with a Whirlpool rep. The company is 150 miles away. They have been to my home 3 times to resolve the issue. They replaced an air trap. The problem... my clothes still wont spin dry!!!

Its a piece of junk. The only time it will finish a wash and spin dry is when it is empty. Otherwise, it stops and lists an unbalanced error code. I opened up the service panels and found no broken hangers or clothes. There’s no way to bypass the system. I have read of similar issues and of course, its just out of warranty. I assumed the warranty was like other brands but it’s much shorter. What to do? Purchase a washer with dials and not a brain; it will last years. Note that the models without a brain cost far less.

My wife and I purchased our Whirlpool Duet Model # WFW95HEDC 7/19/16. I put my first claim in on 12/19/16. We were sitting downstairs one night watching tv and all of a sudden a noise like the sound of a tractor trailer putting on its jake brake came roaring from upstairs. It was so loud that we both jumped. The machine would periodically vibrate violently while going thru its spin cycle. The frequency started to get closer and closer together. Whirlpool had a technician come to our home. They came out 3 times and said that nothing was wrong. They said that it was vibrating because it was on a pedestal and upstairs on a non solid floor. They also blamed the loose water hose on the noise. SERIOUSLY??? After the 3rd visit, and a week before the 4th visit our machine started to leak. We paid $1,079.00 for this washer and we were having to take our laundry to a laundromat to wash it. The technician came out the 4th time and replaced a cracked drum. Apparently it vibrated so badly that the drum cracked. So everything seemed ok, then WHALAH!!! We wash the clothes and go to move it to the dryer and it is dripping wet. Somehow after they replaced the drum the machine started to not spin the water from the clothes very well. Takes drying the clothes for 50min 2x to get them dry. I am now set to have the appliance company come out for a 5th time and still not corrected. Whats worse is that every time I contact Whirlpool they give me the same canned speech and want to set up another appointment with the appliance company. I am soon at the year mark with my manufacturers warranty and still having issues. I think Whirlpool keeps kicking the can down the road without making good on correcting the issue so they can get past the year mark and make us take it up with Home Depot on our extended service plan. I feel bad for everyone out there who got screwed by this company.

When our home burned down, had to get a manufactured home. Orig. refrigerator size was 32 cu.ft. This one that came w/ the house is a lot smaller. Weve has issues with ice dispenser several times in the 18 months weve been here. But I would recommend this size.

The microwave was easy to install above the stove and it has the exhaust fan conveniently hidden out of site underneath it. The cost was very low and it is not complicated to set up and use. I also like the fact of not having countertop space taken up by having the microwave sitting on it.

Installers left and Home Depot Cabrio washer stopped with water left in tub. I reset GFIC outlet, tried again and it stopped. Did some research and tried different outlets. Same result. I discovered that if you shut off machine as soon as the GFIC is reset, then the washer will drain no matter what. I have been on the phone with Home Depot and they have no solution but to wait one week for a repairman. Very dissatisfying service. Now I am running a 20 foot, 3 prong, heavy duty extension cord into living area where there are no GFIC outlets and it has been running. I believe there is a fault in the washer, but they must not care if we get electrocuted from the faulty grounding of their Whirlpool product.

We bought this Whirlpool he washer two months ago, and it is the most aggravatingly frustrating washer weve ever had the displeasure to use. There are times when it washes just fine, but I always have to put the mode on deep water wash because the normal mode uses very little water (like its supposed to) but it doesnt clean the clothes. However, most of the time it doesnt wash at all. All the lights will turn off and youll hear this sound and itll drain the water without having been in the wash cycle. Worthless piece of equipment! I prefer the old washer where I have more control. Whirlpool used to be such a good brand, What Is Happening? The new design for their washing machine nowadays generates a lot of complaints, and with good reason (because they suck).

I bought a full kitchen appliance package 3 years ago, the gas range Clock LED started cutting off the line at the top of the numbers... when the range was about 1 1/2 old... Now 3 years later the range doesnt hold its oven temperature, the cost to fix it is $230 more than what I paid for the range. Whirlpool is unwilling to stand behind their product or provide a replacement part for a reasonable price. So now I will be buying a brand new range and the 3 year old Whirlpool will be taken to the dump. I will never buy a whirlpool appliance again. I thought Whirlpool was a good brand and a reputable company until now. Please beware when buying appliances, whirlpool is not reliable or reputable.

Where to begin? I bought Whirlpool Duet Front-Load Washing Machine about 11 months ago after my top load bearing went bad and start making a lot of noise after 8-9 years. 4 months ago (6 months from purchase) it started to act strange; washing machine will not unlock after a cycle, start throwing F3E1 error. Thats when I first called their support service. Their service technicians are very nice actually. They seem to be local small appliance shop, contacted out by Whirlpool, from my guess. Initial visit was to inform me that Im using WAY too much soap, while I was only using well below what was recommended by Whirlpool manual. RED FLAG #1. Technicians told me to stop using too much soap or start using POD. Also to flush my washing machine with 2 cups of white vinegar in hot cycle every few weeks. Ive changed my soap to Tide POD and starting flushing my washing machine immediately after he left my house. It was running OK, but I still saw F3E1 error at the end of every other cycle, until... thing went really bad one day, it simply stopped responding any command while clothes was still in the washing machine. I unplugged power cable and plug it back, it hums for 10 mins and in the end it was the same result. After several attempt, it finally unlocked itself, thus I could wash my clothes at my parents house. This is when I called support service 2nd time. The same technician came and this time, I had video recording of everything. He could not dismiss this with simple soap theory, so he opens up the washing machine and tells me that its due to bad control board. He proceeds to order new control board, which took a few weeks. New technician comes back with new control board and installs, runs a few test command (not full cycle) and leaves. During this whole time, Im left with no washing machine at home. Good thing I travel sometimes and laundry is done remotely sometimes. This repair didnt improve the situation much. I called them back for another appointment. Another technician comes back and tells me that Whirlpool sent back BAD control board. Now, Im really suspecting their product is really piece of **. At least at this point, I was still happy with their service. He leaves my house claiming that they will order new control board and re-install.A few days later, I receive a call from a lady, claiming that Whirlpool has instructed them to ask me to use different outlet, since they believe my outlet is causing issues. Now Im really pissed. Coming from electrical engineering background, I know theres always any chance, but they should double check this with their own technicians. Anyways, I perform their recommendation, which I knew was a shot in the dark. During this whole ordeal, Im working on a project that are out of state (CA). Not only do I have time to stay home for all these service visits, but Im not even home to test my washing machine. During one of the holiday, I was able to take a few days off. This is when I decided to take different approach. I went to the retailer, whom I purchased my washing machine from. They were also nice, but theres so much they can do.I called Whirlpool direct line to explain my situation, how unhappy I was, and to replace my washing machine. Their response was by the book: We can only execute our warranty policy and replacement is not part of warranty. The representative specialist had enough nerve to ask me why I have not called back in several weeks and continue to repeat it as if its my problem for not reporting back. I had spent 2 months of supports and 4 site visits, where I had to reschedule my work or take a day off, before travelling for projects after holiday seasons. This representative really took customer service to next level of hell. In the end Im without properly functioning washing machine for 4 months. I have to coordinate with my parents to use their washing machine when Im back home. My advice, you should really think 3 times before buying Whirlpool washing machine or any other appliance. Also consider that youre on your own, when their product malfunctions, and youll be sitting on dead appliances.

Whirlpool Refrigerator Model WRX9885IBM01 French Doors - We purchased this $2,000+ dollar refrigerator in December of 2014 and within two weeks of plugging it in, we noticed the freezer drawer was crooked and ice crystals in the freezer compartment. We contacted Whirlpool re the matter and they dispatched a local serviceman. He informed us that the inner lining of the refrigerator was crooked and he contacted Whirlpool. He sent pictures of the crooked drawers and was advised by Whirlpool to adjust the outside door, but nothing could be done for the inside crookedness and that he was to take silicone and seal the refrigerator to prevent air coming in to create the ice... Really? We told him that was merely a Band-Aid to the problems and we wanted a replacement. According to Whirlpool, they can only service our month old refrigerator and cannot replace it.Actually, they cannot even service the defective product they sell, they can only caulk the problem until it comes again. I am not going to stop until everybody in the country buying a refrigerator thinks first about the warranty Whirlpool offers. After reading defective parts, etc., I am amazed they are still in business! We are contacting Lowes to come pick it up! Let them deal with the garbage they are selling!

Purchased this electric range Maytag model YMES8800FZ1 in September 2017. Thought it was just like my old range with self cleaning mode. Beware! Do Not buy this or anything with this new AquaLift self clean technology. That means youre down on your hands and knées, scrubbing. It doesn’t work. Read all the reviews about this new technology. Salesman never informed us. We innocently bought the range with self cleaning, paid lots of money, for crap! Very upset. Will spread the word for all future buyers, pay attention to the self clean mode on what youre buying, cause no one will tell you. Now trying to reach Maytag, but apparently they don’t care.

Within 10 days of installing our new Electric range the cooktop does not look new and although we have used the prescribed cleaning methods, will not remove some cooked on spills over one burner and another burner has white rings around the glass above the dual zone cooking element. While we did not choose the top-of-line model; had expected much greater durability and appearance for our new range. My call into Whirlpool service made me feel like mine was an extremely isolated case and yet nothing would be covered as would be classified as customer fault. Highly disappointing as the cooktop on the range that we replaced seemed so much more durable.

Whirlpool - Back in the 1980s we had Whirlpool appliances that lasted for many, many years. We are now in our mid 60s and retired. We purchased a new home 2-1/2 years ago. Whirlpool appliances were provided with our new home. We were quite pleased at the time. However, we are now sorry we have them.We are very easy on everything we own. When we replace appliances, cars, furniture, etc. we are generally able to sell our used items, which are always in great condition. Unfortunately, this is not the case with our current appliances. I will list the many problems.Combo range hood/microwave oven: it vented absolutely nothing. The microwave oven had its own set of just plain silly issues with the manner in which the touchpad had to be set. The oven did at least work. 2/2013 we had a Broan range hood installed and vented to the outside and purchased a Whirlpool countertop microwave oven. Again we had the little issues with using the touchpad plus the door was very hard to open. This countertop microwave oven failed 1/2015, less than a year of usage. At this time we purchased a Panasonic microwave that is much simpler to use.The Smooth-top range/oven looks nice. It is the most inconsistent range/oven we have ever owned. You cannot lower the cooktop burners to simmer. There is no simmer. On that setting it may as well be turned off. I can set it at about 9 oclock on the dial and some days that may be simmer. Others days it could be higher. Overall, the burners have no consistency. The oven cools quickly and I must be mindful not to toss in a 2nd sheet of cookies without checking the temperature. I have never had to do this on any other oven we have owned.The dishwasher does clean my dishes, thank goodness. However, I have had 2 service calls (under warranty) for a little gasket (hinge pad) which keeps the door propped a bit while loading the silverware into the basket. This piece has failed a third time I will just live without being able to prop the door. And then there is the silverware basket. Each piece must be loaded, handle first, into the slots on the basket. Of course, some of my silverware has wider handles so this does not work well. Such a poor design.The refrigerator was my pride and joy. We paid the extra charge for the French door style instead of the side-by-side style that came with the house. My charges here are more serious. 2 of the little door shelves have broken. Oddly enough these are small shelves which have some items on them that are not used often. If I choose to replace them, it will cost me over 25.00 for each of these little gems. Now, a piece of plastic on the veggie drawer has broken so I must be mindful not to let the drawer drop.Worst of all was the last service call out of warranty. I had standing water/ice on the floor of the freezer. Apparently this was due to a poor design and my service man replaced it with a new P-Trap that actually works. Yes, the original design was bad, yet I still had to pay for the replacement. Seems like this should have been a recall and replaced free of charge. Instead my total charge was 144.06. UGH!!! Now, I do understand I was likely provided bottom of the line appliances with my new home, but to have issues with all of them is ridiculous.

This machine is JUNK and in need of a recall!! DO NOT BUY!!! This was purchased at Lowes for nearly $800 a couple of years ago and what a waste of money. During the first year, they had to send out a tech that told me he was not familiar with top loaders and was not sure why the clothes were not getting clean, nor why they came out with a white residue on the dark clothes. We used the machine cleaner - which the cycles take nearly an hour (how is that efficient?), put in a load of dark clothes WITH NO SOAP and guess what? Then he had me dump in a gallon of vinegar to clean the tub and the wall of the washer and repeated the process and guess what? He informed me that it was just lint. Well, after several visits and using a suggested pin drop of soap, the problem remained. I finally asked him if he was so sure it was lint and not soap residue, would he be willing to taste the lint? It was soap.Obviously after an hour of washing in the efficient washer, the clothes are not getting rinsed. I know this because in just putting in less than ten dark t-shirts, they came out dry!!! He informed me that since he was a contractor for Whirlpool, he was not allowed to continue to come back as he resolved the problem that I was using too much soap! Well, that is only part of the problem. This piece of crap leaks. We not only have a water softener, but a household filter system. In just the last three months, we have replaced the hoses as they are corroding. We were informed by Lowes that the hoses that came with the washers were from China and that they have been replacing them with US made hoses to the customers at no charge due to the amount of returns. Well, those too have been corroding and now I once again have water on the floor.It cost $1.75 to take my clothes to the Laundromat, 26 minutes to wash and ten minutes to get there and back. That is what I have been doing, and using my 23 year old dryer when I get home. It is a shame that the company is not responding to an obvious problem. I only wash two loads in a week - not like I am beating the thing to death with numerous loads or heavy loads. I will not recommend, in fact, I BEG you not to spend your hard earned money on this junk. Buy a $200 washer and if it too craps out in three, four or five years... you are still ahead. You will even save money on headache medication and save your sanity.

Weve owned a Whirlpool Gold Series Dishwasher for about seven years. There has not been a year that has passed that we have not had to place a service call with a local service provider. (Each service call costs $85.85.) The upper tray has come off the tracks more than 10 times. The drainage mechanism broke the first time we used the dishwasher. The fuse box (which is amazingly a self-contained, enclosed, black box) has blown twice, has to be completely replaced, and costs over $180. The second time it broke, I ordered, paid for, and had delivered the replacement part only to find out that the broken part suddenly started working again. (I guess Ill have the $180 part for the next time it breaks.) To suggest that this product is junk is an understatement. It will be replaced very shortly.

Our Whirlpool is 8 years old and - knock on wood - it has been very dependable. It has enough settings to take care of the range of our dirty clothes. It is a front loader and I like that type - it gets the clothes clean in cold water.

I have had this Cabrio washer and it seems to be going well with the washer and I have done lots of laundry from this washer and it seems that it works well and I would recommend it to people and people would like to get their laundry done and people can choose what kinds of washers they want.

If you like having to use a funnel to refill plastic water bottles, and enjoy ice splashed all over your kitchen floor then the Whirlpool Gold refrigerator is the model for you. The problem with ice is if you dont have your glass sealed up to the ice dispenser it will shoot ice out over the top of the glass, and even if you DO do that when you try to remove your glass to cut off the ice supply it continues to disperse ice everywhere. TIP: The only way to more efficiently stop ice from spraying all over your wood floor is to do this: When your glass is full of ice, simply open a door on the refrigerator. That IMMEDIATELY stops the flow of ice OR water. Works great, and its the only way to deal with this horrid design flaw in this product....

Our Whirlpool gas hot water heater was purchased and installed (through Lowes) in April 2008. In February 2009, the thermostat failed. Because the failure happened less than a year after purchase, Whirlpool replaced the part and paid for labor.The hot water heater failed again three weeks ago, and we contacted Whirlpool. We were once again provided with another thermostat, and were charged $135.00 by a plumber to install it (even though the customer service rep stated that there were known issues with this tank model). The tank is still not working properly. We (with our tenants) have tried troubleshooting according to their instructions, to no avail. It has been three weeks now, and no resolution.The heater has a six-year warranty. Not sure what this means if the product is defective to begin with. We pay to attempt to repair it?We will not be spending any more money on labor to install parts that may or may not work and have demanded that Whirlpool replace the heater. Whirlpool has refused to pay for any labor costs and told us that we must take the heater back to Lowes. So I suppose that means we have to pay to have a 3 1/2 year old heater removed from the gas and water lines, transported to Lowes, and a new one installed. What a deal.Stay away from Whirlpool.

Machine wont go through the whole wash cycle., Wash, Rinse, Spin. It stops and shows an error message and then I have to keep rearranging contents, over and over. This is worse if you try to wash a small load.

We purchased this washer in April two years ago. I have had service people out twice to replace the lid. Tonight, my husband comes into the kitchen with chunks of something that I could not readily identify. He tells me the entire frame holding the light has rusted out and that the light is hanging into the tub! I followed him into our air conditioned interior laundry room and placed my hand under the rim. It’s filled with rust and the light is dangling down into the tub!

Its now Nov 8 and Ive been officially dealing with this issue since Sept 26. This washer was installed in a new home. After less than 10 loads, my washer stopped draining and I was left with a load of towel soup for over a week while waiting for a service call. I still have the same defective non functioning washer sitting in my home and have been unable to do laundry at home in all that time. So far Ive spoken with 2 customer service representatives. The first was incapable of scheduling a service call. She clearly did not understand how to operate the database used for scheduling. I was finally able to schedule appointment on my own but had to wait a week before the technician was able to come by. It was determined that either the latch mechanism or the mother board or both are defective from the factory.The second was just plain dismissive and completely unhelpful. I sat on hold for about an hour each time before getting to speak to a person. Ive also received two canned emails in response to my poor review of this washer on the Whirlpool website. They basically blame COVID for the delays and state the parts delivery should take 3-4 weeks. I was originally told 14 working days for delivery of the parts. We are already past both deadline with no end in sight. At this point, Id like the defective washer replaced rather than repaired. And for the record, this was a new washer (less that one month old) installed in a new house that now stinks to high heaven because slimy, scummy water that will not drain out has been there since September 26. Id really just like for someone at Whirlpool to honestly care about this and take a moment to address this issue.

I purchased a Whirlpool washer in 2005. After the extended warranty expired, our washer broke. The Whirlpool manufacturer did not have parts in stock. It’s on backorder, so what does that tell you? So we have had to wait for over a month for the repair shop to receive parts from Whirlpool’s manufacturer. Service is very slow and the quality of product is very poor. After five weeks and no repair parts, we are going to have to purchase a new washer since we do not have our washing machine repaired yet. I promise to never purchase a Whirlpool product again.

I purchased a Whirlpool Cabrio top loading machine approx 3 yrs. ago. When I first bought it, the machine was super quiet... loved it. I loved the capacity of it. About a yr ago I noticed it started making all kinds of noise, we cant have a conversation downstairs because its so loud. Turns out the bearings are broken. The technician was nice enough to explain to me that its a common problem with those machines. However, Whirlpool is not willing to stand by their product and repair it free of charge. Any other product would of been recalled and repaired. That goes for cars, baby products, and so on. But not Whirlpool, I called and spoke to Andrea in Michigan who told me that there is nothing that they are willing to do. After reading the other reviews and their terrible one star average rating it doesnt surprise me. Shame on me for not researching this product before buying. I hope this saves someone else from making the same mistake. In case your wondering, it cost me $117.00 to have the tech look at the machine. The labor would of cost $125.00 and the part is $251.00........

I purchased the washer and dryer set. My complaint is with the washing machine top loader that does not have the tall agitator not getting the clothing clean. All of my clothing come out of the dryer with dirty spots on them where they did not come out in the wash. Its a waste of water and energy because I have to wash them twice! I purchased the combo model numbers WED7300DWO and WTW7300DW0.

DONT BUY WHIRLPOOL! I bought a Whirlpool refrigerator 5 years ago. In June I had to have a new thermostat put in because the refrigerator would not stay cold. The food in the freezer would defrost and then freeze, defrost and then freeze. I had to throw all of the food out. Two weeks ago the refrigerator was making a groaning noise so I looked in the freezer and the temperature was up to 30 degrees. The ice cream was soft, the bread and buns that I had in the freezer were defrosting and small things like crab cakes had also started to defrost. Eventually the temperature went back down to zero.So I called out the repairman AGAIN! He told me this is normal that the freezer goes up to 30 degrees to defrost the freezer and the groaning noise I heard had to do with the Freon. It cannot be normal for food to freeze, defrost and freeze again. I called their customer service and their representative, Jasmine, basically told me all she could do for me was to schedule a service call. Really? I just had the repairman out the day before. I am concerned about food safety with a refrigerator that fails to keep food at the proper temperature.

I see that I am not the only one with the same pilot problem. I just purchased this new model that came out last summer. I bought my new water heater in September and just this past weekend, it messed up. I have not had it for 8 months. Whirlpool sent out a technician yesterday and he said the assembly is not good and the pilot would not light. Well they sent me a replacement part and they are coming out today to install it. The funny thing was that the technician said, Oh, these are hard to work with. We have a lot of problems with these models and they just came out last summer. Its the on that has the little box and you push the pilot button in and hold it until the red light comes on. Anyway, he said he didnt carry parts for that one, only the old ones which last longer. The ones that have the black round circle that looks like a thermostat. I said, Really? Well the reason I bought this water heater is because my last one that I bought 2 years ago kept having the same issue. Whirlpool sent me the assembly with the pilot and all 3 times and would never replace it. I got tired of it always messing up so after having it for 2 years, we just dumped it and went and bought this new model. Here we are 8 months since we bought it and the same thing is happening. I am so furious. I am pissed off that they dont recall these if they are defective. Why do they keep selling them if people have problems? My cousin called me a couple of months ago and asked if my husband could check her water heater and its the same type I had and it was doing the same thing. I will never buy another Whirlpool water heater again.

Big bang for your buck. I have used Whirlpool for years without any needed repairs. Typically you may see brands began to fade as you use them. However, the Whirlpool brand microwave always seem to stay true to its form. As long as you keep the inside clean the microwave should last a long time.

We purchased a new Whirlpool water heater April 2013 at Lowes and every 3-4 months the pilot would go out. My husband would simply re-light the heater, I guess he didnt think it was a big deal. However, in September 2014 the water heaters pilot went out and would not re-light, so I contacted Whirlpool about the warranty. It took 4 telephone calls (two of which involved a plumber, per Whirlpools request), and several days of cold showers for an authorization code to purchase a $8 part (thermo coupler). The hassles that Whirlpool put me through, no one should have to endure. Who ever heard of a technician telling you that they have to talk to the plumber, when you call them to explain a problem with your water heater, such as, the pilot will not stay lit and the plumber said it is the coupler (I couldnt remember the whole name of the part, but surely they should have understood what was wrong). Secondly, providing a plumber (unless youre married to one) to converse with them involves more money. Now I have a plumber at my house so I call Whirlpool and this technician insists that the plumber perform a test on thermo coupler to make sure that it was faulty before she gave the authorization for a new one. Yet again, when I called to Whirlpool with the plumber, while I was voicing my problems in resolving the issue of my water heater with this technician, and she just hung-up on me. So as not to be defeated and having already invested in the expense of the plumber, I called Whirlpool again and requested a manager. The technician asked if she could help and I informed her of my previous encounters. She apologized and took my information to have a manager to call me later; however, she did give me the authorization code for the thermo coupler without delay. When I went to purchase the part, I didnt have the old part (as trade; the plumber hadnt removed it), so I paid for it out-of pocket, to return the old part later.

We purchase all Whirlpool appliances for our new house in Florida in late 2015 from Good Deals Appliances. First repair before 1 wk in-house was the dishwasher. Wires were not connected. Now it is the refrigerator (French door refrigerator model K44913210). We reached out where we purchase the appliances and they gave a number of repairman to connect. He came and told us the compressor & evaporator & valve needed replacement, We found that hard to believe that a 2-yr-old refrigerator needed all this repair. Called another repairman to hear same thing. We were also told this problem is so common with this model. Called Whirlpool. They sent a repairman out. Said same thing first two said. They are paying for parts but not labor. We were told by last repairman that this refrigerator hasnt worked from day one. Passed info to Whirlpool and no comment. We paid a lot of money for an upgraded refrigerator to have it quit in 2 years. Totally not acceptable. On top of this the parts may not work for more than 2 years again. Okay Whirlpool who is going to pay for all the ice & dry ice, the other two repairmen that came. The repairman you sent was double the price of other 2 & will not come back till we pay. We will pass our experience with Whirlpool on to all friends and friends of friends.