Whirlpool washer is junk. Expired I. Less than 4 years. Cost to repair is more than new washer. DO NOT PURCHASE WHIRLPOOL PRODUCTS. Agitator motor burned up without notice. No troubleshooter problem. 2 repairmen suggested I buy new washer.

Whirlpool washer Model WGD4815EW1. Bought this washer just about 4 months ago and right away I hated it but was told by people that all the machines had gone to the lid lock and that the government had mandated the energy saving devices on the machines so the machine will only put just a little water in the machine. I have been VERY VERY unhappy with this machine. My husband figured out a way to bypass the lid lock mechanism. Then after washing clothes many times I found out in order to get my clothes clean I had to just set the dial to Bulky every time OR I had to wash the clothes 2 times to get clean if I didnt. Once we bypassed the lid lock and then I figured out where to put the knob so the clothes would come clean I was fine until last week the machine just would NOT wash or do anything... it filled with water and just sat there until my husband got the water out. I located a Speed Queen from an appliance store and I am much happier. It does not have the CRAZY lid lock on it. I realize that some children are apt to mess with the washers. But I dont have children anymore and when I did I had a laundry room with a lock up high on the door so they could not play in the laundry room. I dont understand why this so called mandate could not have been done in a way as to allow those with kids to have the option on the machine with a built in code device to set the machine so the lid will lock and those of us without children in the house to opt out of the code to set the lid lock. NO REASON why we cant have a CHOICE. As far as I see it is a way for the government to try control more where they need to keep out. The cars have been designed with safety locks for children to keep them safe, but it is up to you to choose to use them. Same principle! Now for the mechanism to make it so the machine will only put so much water in the machine to wash. Youre NOT SAVING any ENERGY or WATER if you have to wash the loads twice!! This whole mandated business with the newer washer machines is a huge JOKE on everyone. I will be searching out used machines and having them rebuilt because I dont EVER plan on buying another one of these newer machines. If enough people stop buying them the manufacturing companies can raise some cane with the government to get the mandate lifted. NO I will not buy another Whirlpool washer. I encourage some of you out there who LOVE a challenge to figure a way to change the stupid motherboards on the newer machines and create a great business for yourself because if someone else can create it you can recreate it.

My Whirlpool Cabrio Washer is a bucket of junk. I bought the washer in about 2008. I was smart and bought the warranty for approximately 3 years. Since I bought it, I have had them replace 3 water pumps, the tub, the computer, and it still knocks and shakes. It also leaves small frayed holes in my beach towels. This machine should be recalled. It needed a warranty from day one. Washer cost $1,000 warranty every year $130.00 per year which covered the repairs at about $900.00 for repairs. I hate it. I just hate it. I can’t stand it anymore. I need a new washer, someone has got to listen.

I had one of the first Maytag Neptunes. Loved it to pieces but finally had a problem and my beloved repair guy said it was almost 20 years old so to give up and move on. Obviously, cant be without a washer for very long so grabbed this Whirlpool Cabrio Platinum Washer. One of the biggest disappointments ever! Clothes come out streaked and splotched, dont smell very fresh or clean even straight after having been washed, stains dont come out even with pre-treating, have to run everything on heavy duty, whites are getting grayer by the week, and all-around horrid performance.Im ready to give up my Starbucks, start packing my lunches for a couple months, skip whatever treats I have to in order to get back to a quality machine that can actually WASH CLOTHES. I wondered exactly what it was or wasnt doing so I stood over it for half an hour. Initially, it loads up about a gallon of water and then spits it out over the rotating drum of clothes. Then it stops and spins that water out. I suspect the design logic was that it would force that gallon of water thru the clothes taking some dirt out with it. It repeats that stupid process several times. Then it finally gets a few inches of water in the bottom and the vestigial agitator tries to move it around.I watched one hand towel lie on top like a dead weasel, never getting pulled down or pushed out or whatever it was supposed to do to get down among the other items and squish together. Life throws me everything from sick kids spewing body fluids to people coming home reeking of hydraulic and other industrial fluids. When I say clean I mean CLEAN. This piece of junk couldnt satisfactorily process half a dozen dust rags. Neptune, Im coming back with my hat in my hand and a whole new appreciation!

I purchased a Whirlpool Cabrio washing machine April 2016. I was so excited to have a new washing machine. I thought the 1st couple times I used it I just didnt have settings right. It uses so little water it doesnt get all clothes wet. If they are not wet they cant be clean. So I started doing very small loads. Then clothes were not clean. They stink. So I have tried every detergent out there. Nothing helps. Another thing it takes an hour or longer per wash to get not so dirty clothes. Not to mention it puts holes in my towels. I tried reaching out to Lowes where we bought it only less than 4 months ago only to be told they would contact Whirlpool. Whirlpool wanted to send tech that I would have to pay for just to tell me that the piece of crap washing machine is doing everything the manufacturer made it to do. I told him I was not going to pay so. I think with all the problems people there should be a class action lawsuit. DO NOT BUY CABRIO!!!

The Whirlpool duet model wfw9150ww01 washing machine is a piece junk. After using it for two years, the bearing has gone out on it and it sounds like a freight train. It will cost $600 to repair it. We only paid $575 for it. What a rip off. Whirlpool makes junk only. Buy something else.

In 2011 we bought a Whirlpool Washer (WTW4950XW). We had a one year warranty. There have been problems ever since we bought it. Of course it is no longer under warranty. In the last few months we have encountered brown spots on clothing. The washer has always spent an inordinate amount of time Scanning. It does not matter how much I readjust the load. I ALWAYS must do an extra Spin and Drain. Sometimes Rinse and Drain helps...sometimes not. Sometimes the machine indicates it MIGHT be finished washing but only the clothing on the bottom of the load is damp. It does not rinse the soap out. Recently when I washed my husbands coat several times -- he had to finally hang it in the shower when he bathed to get the soap out.We had repairmen out once when we had the warranty. They said the drainage hose was wrong. We adjusted that. I called Whirlpool more than once about our problems. They said they could not help because we had no warranty. OK. One young lady said we could get a 5 year warranty for $353. For $499 we might get a machine without all the 747 dials and tweets and fewer government, EPA amenities. Whats wrong with this picture? My old washer lasted 30 years. We are very, very sorry we did not repair it. All I want is a washer that will provide me with clean clothing, towels, sheets and blankets in a timely manner. That does not seem to me to be too much to expect. I am considering a washboard! Or the shower for ALL my laundry! I am angry and frustrated. I always considered Whirlpool a good brand.

Whirlpool Washing Machine Model WTW4950XW0 - This washing machine was purchased as a gift by my father. We have owned this machine for about 2 years. I am very disappointed with the quality of this machine. I have 3 children and several pets. I use my machine a lot and need a quality item that will last. This machine is not that item. Within a few months, the machine was off balance and bolts had to be tightened. We have had problems with the belt, bolts coming loose and the machine not draining.More recently, the machine has become very loud... For approximately the last 6 months. My husband has taken the machine apart and looked for anything to be wrong with it and has found nothing. Now the machine is not running. I will turn it on and it fills with water and then stops. I will clear it out and restart it and it does the same thing. Another issue has been with spinning and draining. The clothes are soaking wet even after the drain/spin cycle.I have researched what could possibly be wrong with this machine and have found a vast number of items that could need replaced. With the money I have already put into fixing this machine in the past and the amount it will cost to fix it this time, I believe I will be further ahead if I buy a new machine made by a different company. I will not be buying a Whirlpool product again.

Ive always had a Whirlpool washing machine and it has been extremely dependable. I have not had any problems with my Whirlpool washer. A Whirlpool has came a long ways with their pricing. It was very affordable for somebody like me and I cant afford a lot but I could afford this. I was very pleased with my purchase and with the product. They havent let me down so far.

We bought our washer (Whirlpool Cabrio) from a rent to own company about 2 years ago, and finally got it paid off. About a week ago, the lid started sticking when it was done washing. I went to open it last night to start some laundry, and it BROKE. Now theres a piece stuck in the bottom part of the lock, and the washer wont start. Anyone else have this issue?

My washing machine would not spin dry. I had a new pressure switch replaced to a tune of $180.00 which was only 26 months old. I have always bought Whirlpool but this will be my last whirlpool appliance.

Model WTW4850OXQO. Purchased this washer in Nov. 2011. Two months ago the washer began making a loud grinding noise in the wash cycle, so loud it can be heard throughout the house. Called the dealer whose serviceman said it was the gearbox and it would need to be replaced. Cost of the gearbox $235.00 plus $165.00 service. Called Whirlpool in TN and was told that I didnt purchase their 1 yr warranty. What the hell is a 1 year warranty but me paying Whirlpool to fix their defective piece of crap in case it breaks in the 1st year. I owned a Kenmore that lasted 11 years, an RCA that lasted 12 years, and a Maytag that lasted 10 years. Never a problem til they died of old age. This piece of ** is breaking down after 3 1/2 years. NEVER buy Whirlpool! Also, the inside of the machine SMELLS. My wife has to use bleach or cleanser to get the smell out. Once again a company in the USA thats too big to care about its customers!

My new energy-saving Whirlpool washer sucks. Laundry comes out smelling as bad as it went in. Washcloths are as dirty as they were when they went in. I have to take my dogs bed blankets to my sons home to wash them because this new washer will not even clean blankets.UPDATED ON 08/21/2015 - I have had two Whirlpool washers in 38 years. They were great. I buy a new up to date energy-saving Whirlpool washer and it doesnt last a year and a half. Now it is costing me $433 to have it repaired. I am preparing a washer and I am very unhappy with to start with. I will never recommend these washers.

I purchased the Whirlpool Cabrio, Model no. WTW5640XW2, on March 3, 2012. I have tried every setting and water temperature and am totally dissatisfied with the washer. It does not clean clothes, tangles them into a twisted mess which requires that they be vigorously shaken out, destroys anything with a draw string. I had an online chat with a representative and was told she was sorry. I posted to Facebook and did receive a call from a repairman, which I will return; however, I do not anticipate receiving any satisfaction. The machine is worthless for washing clothes. I was better off with my 12-year old agitator Whirlpool washer. I do not understand how this machine can be allowed to stay on the market. Id be better off at the river beating my clothes against rocks. I hope someone will get on Whirlpool to give consumer refunds. I have been brought to tears by this machine and I am one tough cookie. Please help!

This Cabrio Washer and Dryer are horrible!!! Dont ever buy one, they will not fix the F1 code, and Whirlpool customer service is non existent!! I hate this company, and will never buy a product made by them again! Be aware that Whirlpool makes products for Kenmore, Maytag, and a few others!!! I just want to spread the word about this washer! If you just bought one try and take it back for something else!!! STAY AWAY FROM WHIRLPOOL!!!

A new washer, kept in pristine condition, indoors in an upstairs laundry room, used by 1 person for 4 years should NOT rust out. I took pictures and sent them to Julia ** a company representative after she offered me a discount on a new washer but would not send me an email with directions like it was some kind of secret until I insisted several times. The email simply had her phone number. I was to let her know the models I would be interested in and she would tell me if those were available for the discount. Then the company would charge me, deliver the new one and charge me to install and remove the old one. How is this for a great company. I sent her the models I might consider. No word back. Whirlpool, not looking like a stand-up company to be proud of. Shame on this company.I like the machine, but seeing it rust out before my very eyes has changed my mind. How will they address a 4 year old washer rusting from the inside out? How will they address a 1 year warranty? I found a copy of Whirlpool Washer Warranty that used to have up to five years for issues such as poor workmanship. It takes more than a year to find these things out. Dont make them if you cant guarantee that they will last. My last Maytag lasted 18 years and was still in good shape. I just wanted a model without the agitator in the middle and on that would conserve water. Should have kept the old one.

I bought this top loading, low water machine 1.5 years ago, $500.00, did not buy extended warranty, expect major appliance to last at least 5 years. Motherboard is out, will not spin, will cost at least 200 to $300 to get it fixed! Selling on Craigslist for 50. So sad. Will never buy whirlpool again, waste of hard earned money!

We bought model # WTW5000DW2 Whirlpool top loader. The sensor for water level continually bangs until the water reaches its required level!! Very annoying! I like that it doesn’t have an agitator but that’s it. I’d rather be able to pick my own water level. It also is a very slow process!! I would not recommend this machine unless it is going into a sound proof room.

I just bought a new home, and it came with what was described as top of the line Whirlpool appliances. The Cabrio toploading washer worked for two loads then just stopped. After arguing with Customer Service for a while (They insisted this must be an installation error.), I talked with the builders. They gave me a different customer service number. My second call got me a repair appointment, during which the repairman discovered that the pump was in fact dead. Because this is a new model, they didnt have a replacement on hand. So, I will have to wait an additional week and a half before the part is installed. This is a product that retails for around $1000, and it lasted less than one day. My last washer cost $400 and was still running fine when I sold it after 10 years. I can already see the handwriting on the wall. After my warranty is up, I will have to replace this hunk of junk with something that has some reliability.

Whirlpool cabrio washing machine is 3 years old and the bottom leaks heavy bearing oil everywhere. I now see it is a common complaint and the seal was incorrectly installed by the manufacturing plant. They should be forced to offer a recall and they should stand behind their product. I will never buy whirlpool again. I see thousands of complaints online.

Dryer panel broke washer. The smell is so gross I will need to throw it out. I used only HE detergent.

The smell from the washer has gotten so bad we have to keep the door closed to our laundry room, or the smell will permeate the whole front part of the house, as it is we have to keep the door to garage which is adjacent to laundry room open to air out laundry room. Our friends and guests, are aways telling us we have water leak or something mildewing, or rotting in our house. The washer works well, and I cant find any buildup. We frequently run it through clean washer cycle, it smells OK for a hour or two, and odor returns!

We bought our washer in on 2011. Within a few months, the washers behind the screws on the top began to rust. Now less than two years after purchasing this high efficiency and expensive washer, not only are all the washers rusted on the plastic lid but behind the the lid and the side of the washer is rusted. Very disappointed and recommend that you do not purchase this machine.

I have the Whirlpool washing machine for last 15 years and there has not been any complaint since its acquisition. I do a lot of laundry because I have a big family, but not major issue so far. I will recommend this brand to anyone willing to buy a washing machine.

This washing machine has been nothing but a problem from the beginning. Theres always something wrong with it. Things that cost so much should last much longer than a couple of years! I have to clean out the drain about every 3rd time I use it or it wont spin out as well.

If you are considering a Cabrio washing machine, save yourself the aggravation and buy something else. I purchased a Cabrio model WTW5640X from Lowes 2 years ago. It has been one disappointment after another. First, the clothes were coming out really wrinkled and not fully rinsed. I now routinely use the extra rinse cycle. I also started washing very small loads with hardly any soap (and yes, I use the HE detergent). That works for me, but its not practical for a household of more than 2.This machine is also not for anyone with kids or who expects to remove routine soils. It doesnt clean well. White socks start looking dingy after a few washes, and even the hot cycle with bleach doesnt get whites white. Now, the washer has started shutting off with the clothes still soaking wet. I can press the Drain & Spin cycle to get it finish the job, but that adds another 13 minutes to the 63 minutes it already takes for a regular cycle with the extra rinse. I so wish I had not replaced my 15 year old Kenmore.

Same old story! Whirlpool Cabrio is a lemon! I did pay a service guy to find out what the problem was - $70. I ordered a control board for $210, I still had the problems. I ordered bearings for $80. Yay, my Cabrio works! Well, this was all 4 months ago and here we go again. My washing machine is doing everything it was before I replaced the brand new parts. Im so mad! I spent $360. I couldve had a new washer, not a $1000 Cabrio, but who cares at this point! Anything seems better than this pile!

I purchased a new Whirlpool Cabrio washer and it has been nothing but a headache. The machine constantly rips our clothes and stretches them beyond repair. Now, the washer keeps showing an F1 error code and I have to restart the machine three times to get it to start. It also stops in the middle of the cycle and I have to restart it. What a piece of garbage! I called Whirlpool several times and they do not stand behind their products. Do not buy Whirlpool. I filed a complaint with the Attorney General and I suggest anyone else having the same problems should do so. Maybe we can get this machine recalled.

I have been blessed with my washing machine. I have never had one problem with it. I have had my machine for over three years now. It is a reliable machine, with five different water levels from small to super. It also has three different water temperatures (just great). I am very pleased with my washing machine. I cannot tell you how many machines we looked at before selecting our Whirlpool, thank goodness we did.

The washing machine is making inviolable noise. I had purchase a semi-auto Whirlpool washing machine from Lotus Koh-e-fiza, Bhopal two months ago. Initially, the company sent a man for demonstration, and at that time, the machine was making a sound and the mechanic removed his back plate and his components and saw that the plate of heating rod is unscrewed. He temporarily tightened that plate with normal screw, and after two months, the same sound is coming again.At present, we are not using the product for the past 5 days and launched a complaint to customer care. The call attender said that the problem will be solved in 20 hours but no one came within 4 days. Today, 21 September 2011, I called to customer care. He was telling me that the complaint has been attended by our attender and at present, no complaint is pending. The washing machine is in warranty period and I am not satisfied with the service of Whirlpool. At present, I am using the product of Godrej and LG, and the service of both company is very good then Whirlpool.

I cant even tell you how disappointed I am. This washer has destroyed my clothes and towels. Ive tried to reach out to company but they want me to call for service. What would I call for? Washer works, it just makes holes in clothes, in towels. There are so many complaints about this. If anyone know how to begin a process like this, please let me know. Trust me, when I write a review about something, its got to be either really good or really bad. I dont have time to write things like this.

This $1,000+ Whirlpool Cabrio washer high-efficiency machine should have lasted between 10-15 years, not 1, not 2, not 3, not 4, not 5! To expect less is to fall for the consumer cave in - where you just give up, give in and buy another. The Whirlpool tech just told the appliance repair guy that was here that the repair would involve a recirculating water pump and a bearing, and would cost $481 to repair. The appliance repairman said he is not in business to condemn appliances, but said he has a Kenmore top loader at his house. Simple, no electronics and less things to go wrong. Well after researching brands and reading reports, I thought I was buying a machine that would last at least as long as my second hand Maytag. Whirlpool has not heard the end of me. I have heard several other people say the same thing. Repair bills are huge and machines do not hold up. So much for buying quality. Now Im going to contact the MA attorney general for the states implied warranty, which means if you spend your money on any appliance, that appliance has an expected lifetime of service. A $1,000+ machine is not expected to fall apart after a few years.

Cabrio washer - What a piece of junk! My washer is 2 years old, it now does its own thing - stopping when it wants, doesnt finish cycle, beeps finished and the clothes are so wet and the washer is not emptied. Then, I put it on drain and spin. One time, it kept going for almost an hour of off and on. My clothes were so out of shape and that was on low spin. I finally took them out and put them outside. The clothes from day one have always come out so wrinkled and that too is on low spin. Im afraid to use high spin. I know you have to for towels, but it still does not drain. It shuts off and on when it feels like it. My first contact with Whirlpool was, Well, did you buy the extended warranty? I hate it when asked that when purchasing any product. Its like saying, This is a piece of crap. Im warning you now so buy the extended. So right there, I felt Whirlpool isnt willing to help. What else can we all do here? Please advise.

Whirlpool Cabrio - Our washing machine just started leaking water with oil underneath. This would be our third repair since purchasing this machine but it doesnt sound like a repair is possible or worth it. Its too bad we cant go back to the old models. They definitely lasted longer with no problems. Companies should make the older models bigger and forget about the front loaders and newer models without the agitators. Too much shaking in the machine causes too many repairs!

Well, I read most of the complaints with the failures in the machine. I guess most of them didnt last long enough to rate their performance so here we go. I bought a Cabrio top loader, high-E washer a couple of years ago. This one had a different kind of agitator - it was just a couple of inches or so off the bottom. I specifically bought this to wash comforters and it seemed like it was good for that (rousing agreement from the salesperson). So after a couple of years of working with it, here are my observations:Pros: There are absolutely none!Cons: Okay, other than not having control over the settings (cannot override any of the preprogrammed wash settings), it simply doesnt get loads clean (yes, I use expensive HE detergent). Except for the bulky setting, there is never enough water to wash and rinse the loads properly. Next, it makes a mess of the clothes. At the end of the cycle, and this is true no matter what I wash or how large or small the load is or which cycle I pick - even light and slow spin, it just makes a tangled mess of the load. Stuff gets stuck inside of other stuff, wrapped around other stuff or are balled up. Never have I seen this type of issue. I constantly get the unbalanced load notice and have to manually redistribute the clothes most of the time.To address the too little water level, there are two options. I have discovered that the bulky setting has the highest water level, so I use that most of the time. From time to time (when I need different water temps or just want more water), I have developed a work-around by putting a Y adapter on the hot water inlet and a short hose. Once the washer starts the wash cycle, I stop it and add a bit of hot water to bring the level up enough to do a decent wash job - same for the rinse cycle. So much for Whirlpools water efficiency.Next, the hot isnt hot. Its barely lukewarm. So I turn the cold down to a trickle and I get a bit hotter water. It takes forever to rinse though. Its a good thing Im semi-retired. Next is the inflexible cycle/water selector. I have never had a washer I couldnt override to tell it what to do in unusual circumstances. Boy, what rocket scientist at Whirlpool dreamed that up!But above all, this just doesnt get loads clean. I have experimented with all the variables, load size, cycle selection, detergents, etc. Most of the time, I have to do two cycles with my loads and these are not unusual or extremely dirty loads. They are just normal, everyday laundry for an adult couple. Really, Whirlpool! Who was the conceptual designer on this? Thank goodness they werent working on the space shuttle or some disease research.Bottom line, I am so soured on the design and performance of this product that I will never buy another Whirlpool product, either brand name or generic (Sears). I just cant understand how a company would let something like this out the door.

I have owned the machine for 1yr and 6 months, bought new from reputable company. The washer always had kind of a clunk sound which the manual says is normal. Clothes would have white marks and streaks after was but disappear when dry. Clothes would seem damp, never like they were completely washed. Went to do a load last night and thats when it stopped working. Powered on, cycle selection was fine, lid locked, typical clunk noise, then nothing, no water. Paused the cycle, lock lid light flashed but didnt unlock. Machine powered off on its own and unlocked. I powered it back on after 30 minutes and it wouldnt let me change the cycle, panel selection was frozen. So I powered it off and contacted repair. They think its the water inlet? Pending repair to see for sure. This is not OK! I had an older machine from the 90s that was still working before I bought this one. So sad to have this type of product from this company.

Had washers model # WTW8500DCO repaired after being install for 14 days. Have had washers repaired every 90 plus days because of constant electrical and mechanical failures. Would not ever buying another whirlpool appliance to my worst enemy. Customer service is a total failure. If you ask a question after talking with you for 5-8 minutes and they dont have an answer they start saying HELLO, HELLO? I have to hang up. I cant hear you. Just a really sad business. Stay away!

This is the worst washing machine I have ever owned. I have had the Whirlpool Cabrio for less than three years, (4 people I use it for), and it is so loud when it is in the spin cycle, you think a jet airplane is taking off inside your house! Apparently the bearings go out of these machines when you use them! I called the company and all they want to do is sell me an extended warranty for over $300.00 for another year! Not doing that! I paid over $1,000.00 for this machine. I thought it would last a long time! Wrong! Please save your money and get a simple old fashioned one! I sure wish I had! Whirlpool doesnt care about their customers, or they would stand behind their products!

This washer has been a lemon since the day we bought it. Always leaves marks all over dark clothes. Had to have a part replaced before we owned it a year & repairman from the company said they have to replace that same part every time they go out so they carry them on the truck. Latch broke after owning it for less than 2 years & now it no longer spins water out of clothes. All this & we havent even owned it 3 years. I had a GE washer for years when I first got married & had children. Never had problems like this. Paid it off on Monday & on Friday it became a piece of junk. How is Whirlpool getting away with this misrepresentation? I dont even see how they can call it a washer.

Purchased a matching set, Whirlpool Cabrio Platinum Washing Machine and Dryer in November of 2012. After just over 2 years, Im stuck replacing the Washing Machine at my expense! The washing machine began leaking water out of the bottom of the unit and became extremely loud when operating it. The repair technician said it was a seal and bearing that needed replaced and the cost of repairing the unit would be cost prohibitive versus replacing the unit all together ($800+)! Originally paid over 2K to purchase these units and have them installed. I do not want to trust or rely on the Whirlpool brand again. I would appreciate any recommendation for a better quality, high capacity, HE washing machine brand to replace the Whirlpool unit with (Samsung, GE, LG)??

I purchased the Whirlpool washer in February 2019 and delivery was in March. As stated in my previous reviews for the manufacturer, and subsequent repair calls, three; from the first time using the washer, it didnt fill properly for the amount of the clothes in it. A piece of paper towel never got wet through the whole wash cycle. I had to resort to raising & lowering the lid numerous times to get to the correct water level; adding water with a container or just pressing down on the switch under the top cover; 4-5 count. Needless to say very time consuming. As for hot water for doing white clothes, forget about it! It seem to me its the same problems with this whirlpool washer thats been happening with most of the other reviewers/purchasers. Did Whirlpool ever think about taken back one of these problem washers and checking it out for themselves? Maybe installing a clear plastic lid to monitor water levels at different wash cycles? Hot water temps when called for? Are these negative reviews ever seen by Whirlpool? Or in the trade is it called.... JOB SECURITY? Any more detail required? Cabo

I have a 1 year old Whirlpool washing machine (Model: WFW94HEXSW Serial:C04151969). The grease from the drum is found to be the cause of clothes being ruined during the wash cycle. I waited over 3 months for a replacement. The drum arrived broken. I ordered again, and it was then said to be on back order. The water shut off developed a slow leak, causing the water to fill, and flow out the front door, causing carpet damage. We have been forced to throw away good clothes, and pay to have our clothes washed, at a not so local laundromat. We feel it would be more than reasonable to have our washer replaced, and professionally installed immediately.

I thought the Calypso had issues until I got the Cabrio. It does not use enough water to get the clothes clean, it leaves them in a tangled mess, and no matter how carefully I load the clothes it is always off-balance making enough noise to wake the dead!

We use a Whirlpool Washing Machine and it is one that came with this apartment provided to us by our employers. My parents had a Whirlpool Washing Machine too and they have had no problems since I have known them to use a Whirlpool. The Whirlpool that we are using has been very reliable in the past 3 years we have been using it. No issues whatsoever! The clothes do come out clean, so it does it's job! It is a top loading washing machine as opposed to the newer front loading ones. I have not used a front loading washing machine, so I do not know how it compares to them. The settings on our Whirlpool are basic and very easy to use. (If you know what you are doing, of course). LOL! Reliable is the word for Whirlpool!!

Whirlpool Duet - Front loading with additional base makes loading and unloading easy. We have had the washer and Dryer about one year now. They were replacements for Kenmore front loaders. We replaced a Kenmore front loading pair that served us faithfully for more than ten years. But when we purchased a new house we decided that it was necessary to upgrade to better units. The Whirlpool Duet pair has performed exceptionally well with one little caveat. Periodically we have to unplug the units to reset the computers when they dont function properly. Small problem, easily solved.

I purchased a new style topload washer (Whirlpool) without the center post approximately one year ago at Lowes and have had nothing but problems with it since day one. It does not clean the clothes and will not spin.

After owning the Cabrio washing machine (WTW5700XW, purchase price $629) for approximately 18 months, it began stalling at the spin cycle, leaving the clothes sopping wet. We found we had to unplug the machine to reboot the computer, and then we were able to manually choose the drain and spin cycle to complete the cycle. Before beginning a new wash cycle, we have to unplug to reboot again, or it sticks in a perpetual pump cycle.I scheduled a repair appointment from the Whirlpool automated service system. The repair man determined the computer control panel has to be replaced. Diagnostic service call was $136, repair est, $321.67, repair service call, $60-130. Total repair cost on an 18-month old machine was $520+. I declined the repair in hope of getting extended warranty coverage from Whirlpool. Nobody has responded to my email complaint from one week ago, not even a computer acknowledgment of receipt of my email.

CABRIO GETS A ZERO RATING. We are sorry we ever bought this washer in 08. The unit had a defective main control board and was replaced in 2012. The factory authorized service agent from A&E literally robbed us of jewelry while in our home. Now the main electronic control board needs to be replaced again. Neither Whirlpool or their authorized agents are truly customer service oriented on the defective product. Neither are willing to make an honest attempt at regaining our trust. I have contacted both and neither will acknowledge or offer reconciliation. The problem with the main board and the recurrent F-50 error has been denied by Whirlpool although acknowledged in numerous consumer forums as this. Our family is now without a wash machine. We have not even received a simple apology for the theft from the service agency - even though their employee has been arrested. BEWARE!

Whirlpool Cabrio - This expensive machine should be called the Presidential. First it spins, spins, spins. It sprays tiny amounts of water, so little, that there is 2 inches or less. There isnt enough water to cover the clothes so no agitator to stir and mix them. There are ridges on the bottom of the tub called aggrivators to twist everything into pretzels. This twisting spreads the dirt around, but does NOT remove it, the utter lack of water giving it no where to go. I use a hose to add extra water, and I hand soap dirty spots. I stop the washer frequently to hand rub and slop the clothes around and un-twist them. Explain to me how running this machine 3 times plus adding water saves water and energy. I cant, in good conscience, sell this POS to someone else, and I cant afford something else. I sure miss my simple reliable old Maytag. I could say even more about this atrocity, but not now. I HATE THIS POS!

My top loading Whirlpool washer model WTW57ESVW1 failed after just over two years. When I called my service man, he turned it on and immediately told me it was not worth fixing as the transmission was bad and this model was known for this issue. I contacted Whirlpool Corp. and the person on the phone stated she could do nothing for me. I asked for a supervisor and was told she would give me a discount on parts, but I had to find out just what part it would be before she would tell me what percentage of a discount she could give me and the service call was my responsibility. Due to this treatment, I will not buy another Whirlpool nor will I recommend it to any of my friends. I will also post on Facebook my experience with Whirlpool.

I will never buy another Whirlpool again or recommend them to anyone, and discourage anyone from buying one. I bought a Cabrio washing machine just over 2 years ago and yesterday I received an F51 error code. The manual says that this code requires a technician to come a check for repairs. Well, before I do anything I google the problem, and lo and behold there are thousands of complaints about this issue with the Cabrio models. Some saying that what needed to be replaced were a control board ($280) and a rotor (unknown amount), not including the price of labor. Some said that Whirlpool knows about this problem and they covered the parts and repair. This didnt get my hopes up, but I called customer service and of course they said that there were no reported issues with the model and that what I found on the internet was probably an older model. Of course! The lady on the phone told me that they would not cover the costs and it would be anywhere from $300 to $500 depending on the route I wanted to take. That is a 1/3 to 1/2 the price I paid for the machine. This is ridiculous! I am tempted to just get rid of the washer and go with a better company that actually cares about their customers. This error code was definitely something they know is a big deal if there was nothing I could do about it other than call a technician. I paid almost $1000 for a machine that has barely lasted 2 years before I have to pay money to have it fixed. Not a company I would ever purchase anything from again!

Purchased top loading Whirlpool Washer WTW5000DW0 10/12/2015 at Best Buys, first no agitator machine for us. Two weeks later I call for repair service because of the noise from tub. Explained in other reviews as earthquake or jet engines. The machine is in the garage and can be heard through the walls into the house. Repair tells this is normal for the machine and it must be our first none agitator machine.I then purchased a extended warranty policy through Whirlpool. 12/13/2016 machine no longer washing clothes. Call Whirlpool for service. Repair came out 01/17/2017 (a month later). Washer plate had to be replaced. The gear was completely shredded. Not in stock, waited 2 weeks to get repaired. Tension springs on outer tub replaced at same time. Was told the excessive grinding and bumping of the tub was not the reason for the gear shredding.06/30/2017 same problem, I set a repair date 07/01/2017 between 8:00 a.m. and 12:00 p.m. No one shows and no call. I call Whirlpool and they are sorry and set the appointment the same day for before 5:00 p.m. No one shows our calls. I call back. Already closed. I call the next day. Sets a new date 07/05/2017, 8:00 a.m. to 12:00 p.m. Same problem. I called back speak to a supervisor who says hell get to problem and find out whats wrong. Sets a new date 07/08/2017 8:00 to 12:00 p.m. 07/07/2017 I get a call after 5:00 p.m. that the repairman is not available and can we reset for 07/13/2017. I hung up and called back the next day and spoke to a supervisor I had previously spoke with. He called an outside repair company that Whirlpool uses in this area. New date 07/12/2017. Repairman shows and I explain the washer plate was loose again and I smelled metal burning. I had told my wife to continue to use the machine to wash the clothes. The repairman tells me I voided the warranty by doing this. Im standing in the garage while he has his head in the machine trying to get the washer plate out. He shuts the lid and turns the machine on wash/spin says the machine is ok. We have an exchange of words and tell him I want to see the washer plate gears. He says he cant get the plate out now and I wasnt there for him to show it to me. This continued until he forced the plate off. He called Tech Support to say I voided the warranty. He told them customer claims loud noises and banging. I asked to speak to Tech but he tells me they dont speak with the customer. I looked at the gears on the washer plate and the transmission. Both had metal shavings. He tells me he is going to do me a favor and replace both. Its supposed to take a week. Wait and see. I have asked for a replacement or money for the machine through Whirlpool. I was told there has to be at least 4 repair requests for the same problem and the repairman has to determine that there is a problem or that its a lemon. I will not recommend or purchase another Whirlpool product.

Whirlpool Cabrio Platinum WTW8800 model - In the words of the service technician who came out finally to service the machine. This machine is a piece of crap that should be recalled from the market. It is a low level-water unit that has no agitator ability in it and does not provide enough water to even slightly clean clothes. Everything must be sorted into the smallest loads possible and even then the clothes dont clean because they beehive into a ball and do not agitate. Technician says the machine cannot be fixed and simply recommends it be trashed (it is 1 1/2 years old). Technician recommends going back to front loaders where at least the clothes agitate. Called Whirlpool for help and was told all system are down...duhhhh. Call back in an hour and Good Luck.

I purchased my Whirlpool Duet Steam Washer and Dryer 4 years ago. My laundry never had that moldy smell. I paid for the set almost $2,900.00! Never again Whirlpool for sure!!!

My Whirlpool Cabrio Washer is less than one year old and quit working. Sears was supposed to come out and fix it (I even have the extended warranty till 2014). Service never showed up; when we called, they told us we had been rescheduled. Here it is the rescheduled day time slot and they still have not arrived. Im getting the runaround from them and I am supposed to be grateful because they gave me a $75 gift card for my inconvenience. Im on hold with Whirlpool because I just want them to take the washer back. I have been told by Sears since it is over 90 days, they cannot refund my money. I just have to wait for a repair which may or may not happen since they may not have the parts. This is unsatisfactory service from both Sears and Whirlpool. I have always bought my appliances through Sears and they have always been Whirlpool. I wish I would have read all these reviews before I purchased this model.

Whirlpool Duet Sports washer purchased 11-08 was found defective by service technician due to improperly secured bolts on counterweight at factory. I contacted Whirlpool service and was informed that warranty will not cover any parts or labor. I ordered parts for repair. It will take at least 2 weeks until arrival and repair of item. Clothes washing now were taken to town for washing at additional expense. After repair, only 90 days of warranty was given by the service technician. The cost of $260 to repair item for a possible life cycle of only 90 more days seems ridiculous.

Had washer since 2016. Have NEVER washed a load where there was not a problem from washer dancing to having clothes come out without water ever touching them. Would NEVER recommend Whirlpool! Tried to contact Whirlpool website to register a rating & even their website is defective - could not get through after several attempts.

This is about my Whirlpool Cabrio top load washer machine (model number WTW6200SWD, serial # CT3670597). I bought this machine in 2007, and soon after, I was having problems with the F1 code. After several trips back and forth to reset the code, so I can get the laundry done, and many frustrations, it was time to call Whirlpool to resolve the problem. I find out that there was a recall for this ongoing issue. They sent a technician to replace the mother board, and everything was fine for some time. Soon after, the machine was giving us more problems with the F1 code, and the UL code. It doesnt matter which way I try to balance the load. This piece of junk will not work. Whirlpool needs to stand behind this issue, and recall this washing machine for good. Every customer should be entitled to a full refund, and a compensation for the many hours of electricity, aggravation, and frustration, wasted trying to get this junk to work.

Everything I have read is what I am going through... First the clothes didnt come clean. Lint piles on everything dark... Then at 1 yr and 7 months old, the drum and spin mechanism breaks. It cost me $333 in labor... Should have cost me nothing as far as Im concerned. 2 weeks later, its putting a code up that the hot and cold lines are crossed. Nope, its the whole computer board. Whirlpool again said they will just pay for parts... piece of crap. I paid for the best... Sure didnt get it.

I have a new Duet Washer and it is a nightmare. It keeps throwing the same F8 E1 code. The repair people have replaced five parts and been out four times. I feel like I have been scammed out of $900. I will never purchase a Whirlpool again ever!

We bought this washer brand new and as soon as it was outside the one year warranty the bearing went out. They had to order a whole new drum kit. A MONTH later I had a running washing machine again. The day after it was fixed it started leaking underneath the machine. Serviceman came and looked at it and said No must be the hoses (my responsibility to fix). Nope kept leaking and two months later Im doing laundry and an entire load of water floods my laundry room. Drum broke again!! SIX WEEKS LATER I still am waiting for a new drum. I had to fight to get Whirlpool to fix it again and they wont even return my calls about why its taking so long! We are a family of 8, so doing laundry at a laundromat is outrageous! Dont ever buy Whirlpool washers!!!

I purchased a Whirlpool Cabrio Washer In July 2014 for $937 cd. What a waste of my hard earned money! I have had nothing but issues with it since I purchased it. The retailer no longer sells them as they have seen nothing but complaints with them yet Whirlpool did nothing to help me as a client. It does not wash the clothes, there is such a foul smell even when cleaning it once a month as requested and the clothes comes out soaking and not rinsed properly. The technician came out and advised the washer was not broken. That is just the model. I have requested supervisors to call me back and most recently wrote the corporate office. I am out almost $1000 and in a situation where I have to go purchase a new washer as I just cant stand to use this product any longer. I am shocked they have not placed a recall on this model. What a poor product.

My wife and I purchased this Cabrio washer 6 years ago when we got our new home. I have replaced the discharge pump 2 times, and approximately 2 months ago, we developed a noise so loud it was like a jet engine landing. I called our appliance store and paid $100 for an estimate, only to find out it will cost $973.00 to fix it. When we bought this, I was told it will be the last washer we will ever need. Ill never use Whirlpool again and recommend no one else does, either. I wrote to your customer chat line and basically the reply was Sorry about your luck. I know Im not the only one with this issue.

The machine pass all the cycles but the clothes are only very wet and still dirty.

Something inside the machine broke causing it to tear up my clothes! I had it repaired once, now it is 4 months outside warranty and it is destroying my clothes again. Whirlpool will do nothing to help remedy my problem. They did offer to help repair it at a cost of $350. Not happy with my Whirlpool washer. Looking to replace my 16-month old washer.

Off balance, wont wash correctly. Familiar stories online. Wasted money on a washer that is not very old. Wont buy another one ever again.

If 0 stars was an option, I would have chosen that. Ive had my own home for 34 years and have had many washing machines over the years. My Whirlpool Cabrio is absolutely the worst washer I have ever encountered. It doesnt get clothes clean and constantly gets out of balance. Whirlpool did a service call and said it is functioning as designed so I was unable to get a replacement. I really hate being wasteful and adding a huge appliance to a landfill but I will be replacing this machine as soon as it fits into my budget. I dont have a receipt to submit because it was purchased by my builder at my request. Do not buy this machine!

We bought a Cabrio washer four years ago for over 1,000 dollars. It lasted two years. The cost to repair was too high. We bought a low-end simple machine two years ago from Whirlpool. Now we are told it needs a new control panel, which again is going to make it not worth fixing. Two machines in four years. I called their customer service and there was nothing they could for me. The person they recommended to fix it told me it wasnt worth fixing and didnt even come out. I am done with Whirlpool.

Whirlpool Cabrio Washing Machine F1 code - We have had this washing machine for over 6 years now, and ever since our 3 year warranty time was up, the washing machine will only stop, and display the F1 code as soon as the wash cycle has completed, with 23 minutes left. To start off, with this problem, it is causing me more water, and electricity that should not have to be wasted if the machine worked properly. I called the place where I got the machine, and was told to give Whirlpool a call. I did this, and was told that there was nothing that could be done, and if I would like to schedule an appointment for a tech to come out and work on it, they could do that. YES, I would have to pay for it. Needless to say, the washer has been doing this for over 6 years, and if there is a way to get it fixed WITHOUT having to pay for the repairs, that would be wonderful.

Havent even had the Cabrio washer for three years & Ive hated it since day one!!! First, our clothes dont come out clean OR come out with white streaks (changed soap, still happened!). Washing bedding is a nightmare! They are sopping wet & I have to wring it out. Finally broke down today & the repairman quoted over $600 to fix (paid $800). Take this piece of junk away!!! It cost me less to replace than get fixed; way to help the environment!

Reliability. I have bought Whirlpool used and new and they have been the best washers that last so much longer than other brands. They also have more than enough settings to truly take care of everything in your home that can be washed.

This machine has been very reliable. We have had since 2001 and have had not issues, Im really not sure on how clean our clothes are. Sometimes they have a odor but this is common with front load washers. I leave the door open and put baking soda into the machine regularly. Also clean the rubber seal because mold will accumulating on it.

This is not a new washer (Whirlpool Cabrio INTW6200VWO) and it works well BUT since we have owned it we have had rust at the bleach dispenser. I am seeing on the internet there are many complaints about this and there was a recall? But they have run out of replacement parts??? Never received any recall notice. We have online instructions on how to repair and have done this many times and the rust comes back. About a week ago we sanded, primed and enamel painted the area plus I have put NO BLEACH in the dispenser and the rust is coming back. I hate to replace a working machine but this rust can and will get on my clothing. Whirlpool was the absolutely best in the past but this one is a lemon.

I purchased a new Whirlpool Cabrio washing machine from DeWaard & Bode at Bellingham, WA in January of 2007. The serial number is **** and the model number is ****. Several months ago, the dreaded F1 code appeared. The code initiates when the washing machine is started and must be cancelled and started 3 times to continue washing. Later, with approximately 19 minutes left in the cycle, the code reappears and requires canceling and restarting another 3 times, at times 4. I have no extended warranty so I have no coverage for repairs. I also dont want to pay for a service call for what is most likely the computer module as evidenced from the majority of complaints online. This washing machine still looks new and works other than the inconvenience of having to stand by when starting the cycle to reset the code and then having to run upstairs later to reset the machine when its partially through the cycle. At some point, it will likely quit operating all together. I have purchased several appliances over the years from DeWaard & Bode and will be replacing all kitchen appliances again next year due to a planned remodeling but at this time, I do not intend to get them locally due to this issue. I have reviewed several comments online and feel that Whirlpool has a real problem with this particular machine that they refuse to be responsible of. I was offered an extended service plan for 1 year at $132.01 or 3 years for $336.61 but Id have to wait to be allowed to utilize it due to existing circumstances. Im not sure if a fix is actually available. The local dealer did not offer any assistance.

This has been the worst purchase I have ever made! Within 2 months of it going out of its one year warranty I called (Lowes) to have it repaired. Spent $300 on the first repair to get rid of the jet engine sound AND the oil splatter all over the floor then within one month from that repair it has a F code error and wont finish washing a load. It just stops. I have tried everything from unplugging it to restarting and it just wont work. Now have to wait 1 week for the repairman to come back out (hopefully that warranty of 90 days will be helpful). Do Not Buy this machine!!!

Im so tired of the mold smell that never goes away, even after following their cleaning cycle many times over. I dont know what to do but I spent extra $ to purchase my washer and now this!

Washer has rusted out after only four years. I bought my set from Sears, and thought I would get good use out of it for many years; but I am experiencing rust falling from around the rim of the washer. Very dissatisfied with the product, I will never buy another appliance from Sears again. I have always used Sears appliances but after this experience I would not recommend Sears to anyone. I was told that the warranty was for one year, and the rust would not have been covered anyway. Very Dissatisfied Consumer. I thought Sears would stand behind their products. Yea, right.

I purchased Whirlpool top loading washing machine model # WTW57ESVW less than 2 years ago. It stopped working yesterday. I had a trusted professional repairman evaluate it today. The motor needs to be replaced after less than 2 years?! The customer service reps basically said sorry. I should have purchased the extended warranty. Is it not reasonable to trust that a Whirlpool washing machine motor should last more than 2 years.I am very unhappy and very angry that Whirlpool will not stand behind their product. The last customer service rep I spoke to suggested she could send one of their repairmen and replace the motor at a cost to me of $299.00. So, after less than 2 years, I am offered an amount to pay of about half the cost I paid less than 2 years ago for the brand new washing machine. My home is full of Whirlpool appliances. I have been a good and loyal customer for over 30 years. I am very angry and upset with Whirlpool. Please explain to me why it is not reasonable for me to trust and believe that a Whirlpool top loading machine that is well cared for and not abused in any fashion should last longer than 2 years? Is this being a loyal Whirlpool customer gets you, I should have purchased the extended warranty”? We are talking about a motor here, not a fabric or bleach dispenser that breaks. Although, those parts should not break either, there is a big difference from something like that and a motor. Please contact me as soon as possible at either number listed above. Thank you.

Whirpool Product VMW TL WASHER with impeller absolutely is crap. I have it almost a year and it smells, and it noisy like a dog was in the machine and someone started it. Its off balance constantly. I hate it and will place on every blog the worst review I can write. Its a nightmare. It has a fake bleach dispenser a door but no holder underneath. Even the repairman thought the bleach went in the dispenser. My clothes were ruined along with sheets, etc on numerous washes. The bleach partially dispensed on dark clothes at least 8 washes.The washer was purchased at BrandsMart 11 months ago and so theres no returns.

I purchased a Whirlpool Washing Machine in November, 2015 and today, I had a repair person out who said the bearing had ruptured and the washing machine cannot be repaired - 2 1/2 years later. Contacted Whirlpool Customer Service who would do nothing other than try to explain to me that I should have purchased an extended warranty as they could not stand behind the machine past the one year. Would not even offer sending a tech out on their dime to confirm what my repairman had said that this is a failed production process of these machines - it was nothing that I had done caused this issue. But yet they wanted to sell me another machine. It will be a cold day before I purchase another Whirlpool product.I was shocked at the lack of customer service to assist with a situation that both the location I purchased it from and my own repair tech said that they are seeing so often with these machines. I would never purchase another item from Whirlpool again nor would I recommend any of their items. I will go to great lengths to give others the background on how Whirlpool will not stand behind their products, lack of customer service to resolve a situation or can work outside of what is given to them to correct a situation - this is not OK!

This is a horrible washing machine. All the clothes (and I mean small loads, medium loads, large loads) come out twisted and so wrinkled. I have never seen anything like it. I dont machine dry many items and so everything not dried that way has to be ironed. Also, there is white residue of some kind left on the clothes so the extra rinse must be used. How is that energy and water-saver sufficient? Again, the government EPA in its brilliance has screwed up another product. It also takes much longer to wash clothes, again, energy efficient? After reading the wasted time on other reviews of talking to Whirlpool, I didnt even bother contacting them. HE front loaders (which we had a Samsung that lasted 1 1/2 years before breaking down) and replaced by this top loading HE, are the worst. Give me back my old fashioned washer.

All of these awful reviews and you continue to sell the Made in China JUNK!!! And shame on the stores that advertise and sell Whirlpool JUNK!! They should put a warning on these machines stating Will not last, gets off balance and does not clean your clothes. Yes we bought the Cabrio like the others, our clothes would not get clean, because like sheets, would end up looking like a doughnut without a hole and all of the dirty water would drain through the middle and make a spot. Then you have to wash them over and over. But that is not the worse part! It only lasted 13 months, YES I said 13 months just past the warranty LOL!!When the man came to make repairs, it was the gear box and was going to cost almost $600. Almost as much as we paid for the machine. He recommended getting a Speed Queen, we did and I LOVE it!! I think it is the BEST MACHINE I have ever had. They are a little hard to find though, but I found where they were sold on the internet and the dealer had to order it. Well worth the time and trouble, (trouble) which I dont expect to have with this machine. Like I said it is a wonderful beast. And I will never buy another product made by Whirlpool. Before my husband retired he made prototypes for autos so he knows about testing and Whirlpool had to know this product had bad flaws before they put it on the market, I call that fraud. Bad taste in my wallet, Michigan.

I have Whirlpool Washing Machine bought at end of 2012. In 2014, I faced an issue where the washing machine board ics are gone. The services people came and check the replaced a board. It was cost me 6000 Rupees including the service cost. Very next year 2015, again the same issue. Board of the washing machine gone. Now I have to change the board. It seems it may cost more than previous one.I heard that these service engineers are taking the previous my board / replaced board. They are repairing it and sold it again and again so the quality of the board is question mark. As a customer I / we cannot spend money and change board every year. I just want everyone to think twice before you go to Whirlpool Washing Machine & its products. I had a same kind of poor quality issue with even water purifier too. Consequences - I have spent Rs. 10000 already, it is loss for me beside the buying cost of the products.

This is our second Cabrio w10550273a. The first one was just as bad as this one. It was replaced under an extended warranty we bought. This washer just like the last one constantly gives a UL code. Thought the washer and load are level.

I bought a Cabrio three years ago. Unless you wash everything on gentle and turn items with zipper inside out, it puts holes in everything. Then exactly one week after the warranty was up, it started giving an error code. I called the company and was told this was a common error and they would send someone to look at it for $150+. It would likely be another $300-$400 for parts and labor! I had someone else (not Whirlpool) come look at it and they said it was a bad computer that I should just replace the washer, because it would cost more than it was worth. So for two years, we have had to wait exactly 11 minutes for the washer to fault then restart it and repeat 3-6 times. It takes 2.5 hours to complete one cycle. If this is such a common error, why havent they fixed it or recalled the piece of junk?! Because they can make a lot more money this way! Three people I know have Cabrios and all have the same issue and all happened within a month of the warranty expiring. I am starting to think there is some sort of timer that makes it go bad just after the warranty expires on purpose. I will never buy another Whirlpool, Maytag, KitchenAid, Jenn-Air, or Amana (all the same company with different names).

The salesperson was great but we are not happy with our washer. We already had it swapped out once because of white spots showing up on our clothes. The only thing they could think of was that the bleach I used wasnt rinsing out completely so it showed up on our clothes. Recently, I washed a table runner by itself and it had some red in it. Now there are red spots on a couple of items that I washed after the runner. My husband just now asked why there were red spots on a shirt that he wears all the time. I explained. Also, we have had some white spots on clothes and I could scratch it out without leaving a permanent mark. Were no longer using bleach and we use only liquid detergent and all of it is HE. So I dont understand the machine. I hate it.

There seemed to be an issue with the Whirlpool Cabrio Washer Pump. If a button comes off from your clothing or snap, etc., it gets trapped in the washer pump, causing it to crack and leak. Whirlpool on warranty only allows for one free change and anything after that costs $300.00. This is going to be the third time we are having problems with this and it is becoming, economically, a struggle for us. We have checked every button and snap to make sure they are fastened tightly, as well as any other type of items that may fall off in the wash and become trapped in the pump causing it to crack and leak. These pumps were poorly made and Whirlpool needs to be more aware of this problem rather than telling the customer that they are not aware of the situation.

Ive had trouble with my washing machine since the end of May 2011. I have had over 5 service/repair calls which still resulted with the same problem. By the way, I do have a warranty on this product (which hasnt seem to have helped at all). I have never had such poor customer service in my life as I have had from Sears and can assure you, I will never buy another product from Sears or Whirlpool considering the experience I have had. I have missed numerous days at work only to wait for a repair appointment that never happened. Needless to say, I am very disappointed and would not recommend anyone to buy from Sears or Whirlpool.

I purchased Whirlpool washer in Dec.2017 and used it in winter months only (Nov to March). It kept leaking and had to get appliance repair service for $50 and was told that machine is defective and whirlpool should repair it or replace it. I phoned whirlpool and they told me I have to use their appliance repair shop to evaluate the machine for cost of $130. The inlet valve was leaking and needed replacement for a cost of $253.55 and whirlpool shirked all and any responsibility. Dont buy whirlpool as it is not a good product and service is poor.

I bought my Cabrio washer 16 months ago to service a family of 4 adults, 2 children and 2 dogs. Anything that has the slightest stain has to be pre-rinsed or pre-washed in the sink before going into the washer. Every load is an unbalanced load. Although the floor is perfectly level, the washer bucks and dances as though it is possessed. I never expected a $900 washer to be a piece of junk. I would love to be part of a class action lawsuit regarding this washer.

The washer buttons stopped responding after 19 months. Lid lock sensor didn’t work. Replaced control board because new sensor did not fix it. Went bad again after a week. I have to replace it. I think 1 year warranties are not enough for a major appliance.

Whirlpool washing machine has always been reliable for me. I have owned 2 and they lasted me many many years. Its easy to use, and cleans clothes perfectly. My family is also a fan of Whirlpool appliances.

Great front loading machine. Dont have the smell problems a lot of people that I know who have front load. Cleans all types of clothing very well. 13 years of reliable service with very little maintenance.

This washer never worked right. It simply mixes the clothes up with little water. A real piece of crap. See the 2000 other complaints. Time for class action suit.

My landlord replaced our old Whirpool topload washer with a Whirlpool HE topload machine last year. Looks sleek, lots of settings BUT IT DOES NOT GET CLOTHES CLEAN - not on any setting, not if loaded as recommended or under-loaded, not if I use more or less detergent, and not if I follow all the tips for getting rid of residue. This machine so under-performs I have to spot clean my clothes AFTER I was them. And were not talking deep dirt or grime here, or things that need special treatment, Just ordinary dirt dirt, to which the machine adds gray streaks of dirty water residue. Thank God I didnt buy this turkey for myself -- I will NEVER buy one of these machines. I did two small rugs today and they came out dingier than they went in. These machines should be recalled. If I could give it less than one star, I would.

I bought Whirlpool Cabrio washer two months ago (Model number : WTW7300DW0). They indicate washer use less water and clean better, but that is not true. Some clothes on top of the load were not even getting wet and clothes smell bad after washing. Even worse is that clothes got holes in many places and some clothes were totally destroyed after washing. In just two months, I have to throw away many of my towels and clothes. I dont believe this kind of washer should be sold again. This should be a recall to give us a replacement ASAP and remove any products still in the market. There are many complaints online, I hope someone will stop this and do the right thing.

Bought new Whirlpool duet washer 4.0 couple years ago. Started making load noise. Started checking and its the rear bearing and sounds of it will cost more to replace than to buy a new one. Found this page and after reading review after review, I will not spend a dime to fix the junk product from Whirlpool. Going to put in the dumpster and never buy another Whirlpool product. I have never seen so many complaints about a product and many being the same bearing problem. Where is our recall process? Its ok to rip off people over and over with no consequence. And why do large chains keep their product? Guess theyre in on the rip off.

Two months ago, I bought a Whirlpool duet washer and the computer went out, two days after the warranty was up. It went bad that I disconnected the detergent mechanism, which made it work, for now.

Whirlpool has been a trusted name for us for many years. The large tub has cut my wash load in half. Large towels to delicates have never been a problem. My washer is going on 12 yrs old and runs like a champ.

Whirl Pool Duet Wash WFW9400SW - I had this washer for 5-1/2 years. I use it about 3 times a month. Warranty ran out this last February. Machine stopped working. Called tech and he came and said I need a new console and power board. Two weeks later I get told they dont make it anymore and sorry about your luck. I used this washer under 200 times in 5 and half years. Whirlpool offered nothing and I will never buy a Whirlpool product again.