They are good washers but they are overpriced. They have way too many functions for doing laundry. I know everyone wants their washer to do it all but the machines just can’t. There is no washing machine in the world that can sense a stain and pinpoint it and remove it.

I have Whirlpool Gold washer and dryer and microwave. All handles and grills and trays have broken. What a disappointment ! Their top of the line? We, at this house, will always avoid buying anything from crap pool gold!! Its a disgrace the way they make these things. And the support sucks!

Purchased a Whirlpool WRF990SLAM fridge in 2013. Ice maker went out and the evaporator. Service tech said he needed permission from Whirlpool to work on. Would definitely not recommend purchasing this brand.

We purchased a Whirlpool Cabrio Washer (Mod #WTW7300XW1) and Dryer in 2011. Ever since we have had the washer it has eaten clothing, towels, sheets etc. It now has a main bearing that is so noisy that we have to close the door to the laundry room to be able to hear in the rest of the house. Also the sealed tank around the drum is now leaking. We invested close to $1000.00 in this washer and in my opinion it is a piece of junk. The washer repairman told me that he has had 3 (three) other Cabrios with the same problem in the last month, but Whirlpool says that there is nothing they can do as they have had no issues with this problem. Last Whirlpool product that I will buy.

I own a Whirlpool Cabrio washer, model #WTW7800XWO. The lid to the washer has completely detached for lack of a better word. It literally blew-off during the spin cycle and is hanging on by one hinge. My husband is disabled and I have had to go without using the washer for several days, waiting on a repair person not to mention the expense that will be incurred.This was a very potentially dangerous situation. My washer is barely older than one year. To add insult to injury, when I contacted the customer service department, I was told I would have to purchase and replace the lid or pay $299.00 for warranty insurance to have it covered because this is not considered a Quality Control issue.The service person has told me that both hinges and the lid will have to be ordered and replaced, leaving me without a washer for several more days. No one has been able to tell me why this happened. I fear this happening again after repair and do not feel safe with this washer. I would appreciate a response as soon as possible.

Well, I read most of the complaints with the failures in the machine. I guess most of them didnt last long enough to rate their performance so here we go. I bought a Cabrio top loader, high-E washer a couple of years ago. This one had a different kind of agitator - it was just a couple of inches or so off the bottom. I specifically bought this to wash comforters and it seemed like it was good for that (rousing agreement from the salesperson). So after a couple of years of working with it, here are my observations:Pros: There are absolutely none!Cons: Okay, other than not having control over the settings (cannot override any of the preprogrammed wash settings), it simply doesnt get loads clean (yes, I use expensive HE detergent). Except for the bulky setting, there is never enough water to wash and rinse the loads properly. Next, it makes a mess of the clothes. At the end of the cycle, and this is true no matter what I wash or how large or small the load is or which cycle I pick - even light and slow spin, it just makes a tangled mess of the load. Stuff gets stuck inside of other stuff, wrapped around other stuff or are balled up. Never have I seen this type of issue. I constantly get the unbalanced load notice and have to manually redistribute the clothes most of the time.To address the too little water level, there are two options. I have discovered that the bulky setting has the highest water level, so I use that most of the time. From time to time (when I need different water temps or just want more water), I have developed a work-around by putting a Y adapter on the hot water inlet and a short hose. Once the washer starts the wash cycle, I stop it and add a bit of hot water to bring the level up enough to do a decent wash job - same for the rinse cycle. So much for Whirlpools water efficiency.Next, the hot isnt hot. Its barely lukewarm. So I turn the cold down to a trickle and I get a bit hotter water. It takes forever to rinse though. Its a good thing Im semi-retired. Next is the inflexible cycle/water selector. I have never had a washer I couldnt override to tell it what to do in unusual circumstances. Boy, what rocket scientist at Whirlpool dreamed that up!But above all, this just doesnt get loads clean. I have experimented with all the variables, load size, cycle selection, detergents, etc. Most of the time, I have to do two cycles with my loads and these are not unusual or extremely dirty loads. They are just normal, everyday laundry for an adult couple. Really, Whirlpool! Who was the conceptual designer on this? Thank goodness they werent working on the space shuttle or some disease research.Bottom line, I am so soured on the design and performance of this product that I will never buy another Whirlpool product, either brand name or generic (Sears). I just cant understand how a company would let something like this out the door.

My daughter bought a mobile home manufactured by sunshine mobile home co. in Red Bay al. The home is only 6 mo. old. In that home there is a Whirlpool microwave oven model # WMH2175XVB-1 Serial # TRY 20 23398. After 2 months my daughter microwave stopped working, Whirlpool sent a repair man out to fix it. He didnt have the parts to repair it so he left to order some parts that he thought might be the problem. When the repairman returned two weeks later with the parts, he replaced a door switch. The oven started to work. About 4 days later it quit working again. The repairman returned for the third time, tried repairing the oven and was unable. I had to help him remove the oven so he could take it home with him so he could try to repair it. At that time I was so angry that the Whirlpool co. would send a repair man out three times to repair something that was obviously junk. When I talked to the people at Whirlpool they told me all they were authorized to do was repair it. I explained the repairman has tried three times and couldnt and that they in good faith replace the unit. The answer I received had to come from a mentally challenged person. If this is the response of Whirlpool about their product, then I want no part of them in the future.

Whirlpool Duet WFW94HEAW0 Washer - Bought the machine in Feb 2014 and was generally very pleased with it. However a few weeks ago we started getting oil/grease stains on clothing. Wasnt sure what was causing it but it has now got so bad that the machine cant be used. An internet search indicates it is possibly a ball racer ring and doesnt sound an uncommon issue. A call to Whirlpool resulted in a quote for circa $350 for a service call. Thats a 1/3rd of the original value (includes a 12 month warranty). And its just over a year old!!! We had a problem with the Maytag Neptune that ended in a class action suit and now this replacement machine seems to be even worse. I would recommend anyone to really consider what to buy and give this range a miss.

Bought Whirlpool refrigerator in October 2014, model WDT710PAYH6. Ice maker never worked right and then started leaking water. A month later it is still not fixed even though it is supposed to be under warranty. I bought a Whirlpool dishwasher and stove at that same time -- both of those needed to be replaced right out of the box! Called Whirlpool and they wont replace. Only referred me to a different repair company. Meanwhile it is leaking all over the floor. Now I see all these complaints for the same issue, yet the Whirlpool rep says they know nothing of this problem! I have a brand new Whirlpool matching microwave that sits uninstalled. I am wondering if I should even bother. I bought expensive new appliances to avoid the hassle of older items possibly breaking down -- and I have never been more frustrated in my life.

Weve been in this house for almost 4 years so the dishwasher (Whirlpool WDT790SAYM) is no older than that, maybe even 2.5 since I think I got it home in my CX-5 which is 2.5 years old. Anyway, never really had a problem with it and we run ours maybe once a day or twice in a row every 3 days. Last night I remember running a load and this morning noticed the dishes were dirty but the inside of the tub looked clean. So I plop another pod in and tried to run it again and sat there and watched it. It filled up with water but then nothing. After 20 minutes I opened the door and steam came out so the heater element was working and there was water at the bottom. I tried various things but nothing. Canceling still works.So either I try to get this fixed, or buy a new one. This wasnt a cheap dishwasher either. My wife balked when I 1st bought it considering she thinks a $300 model is better than most of these $500+ models. Right now I cant argue with her since we just replaced an expensive Samsung washing machine that lasted maybe 5 years. Theres another review of this model on these forums and the person tried to get it repaired many times and it appears maybe the same thing is happening to us. I wont go down that road considering repairs like that exceed the cost of a new dishwasher.

I bought my glass top stainless electric Whirlpool range in April of 2019. It worked great until December 2019. Four days before Christmas my daughter was home alone and using the oven to heat up dinner. She smelled a terrible smell and there was a ton of electrical blue smoke. She called me at work and I told her to turn it off. My husband came home as I was talking to her and pulled out the stove. The place where the stove meets to cord had burst into flames. The wires in the cord were so badly damaged they were all exposed and singed. Our house could have caught fire! The whirlpool company will not stand by their product. They blamed it on the team at Lowe’s who installed the range...Lowe’s has been nothing but confusing and frustrating to deal with! I can’t believe how we’ve been treated. Do not buy whirlpool! These stoves are dangerous!

Yesterday I purchased this Whirlpool top load washer model WTW4816FW with agitator and we installed it at our vacation home and I started a small load to wash. Yikes, it made noises like a machine that is on its last legs. I knew from washing clothes for 40 years that this is NOT right. We, hubby and I waited and listened to this piece of junk to finish the cycle. Thank god I had set it for a short wash. We also videoed this contraption while it was grinding. I called Lowes and politely told them I was returning it. Thankfully they never had a problem with us bringing it back. (This must happen often.) I go back to the appliance department and decide on a Maytag. I noticed that it looked like the junk we just returned. I stood there and looked up the model number online and lo and behold there was a video of it doing exactly the same noise. It was virtually the same machine I just returned with just a name change. Needless to say we left the store washerless until I can research this further. I then found out that Whirlpool now owns Maytag. Thing is I just bought a front loader Maytag for my main home and it works good. It was a replacement for a Whirlpool without a agitator which worked well too. The YouTube videos seem to be washers with agitators doing this. I just wish I could post the video for all to hear. I guess we are all at the mercy of big companies who dont care if they make a good product as long as they can make it cheap.

Too many times my clothing comes out dirtier than what it was going in... Sometimes my clothes come out dry in spots, never washed, lint and white soap spots on clothing as if never washed after a whole cycle. Huge waste of money and time. Cant trust any positive reviews about Whirlpool, they have to be rigged!!! I will never purchase another Whirlpool product again.

My agitator-free washer began tearing small holes in my clothing and sheets about one year after purchase. I contacted Whirlpool and they sent out a service person, who ran a diagnostic test on the washer and said it was fine and I should learn how to wash clothes and load the washer, etc. The barrel of this washer has little holes and I believe that when it spins the clothing, some pieces may stick in one of those holes causing tearing. The service person also told me that my clothes were old. I guess that means this washer is not for washing old clothing. The tears in my clothing are in places that are very unlikely to tear, like the back of my jeans behind the calf of a leg, about half way up from the ankle. There are holes in my tee shirts at the bottom of the back. Even if I were a smoker, which I am not, I would not likely burn holes in those areas. Whirlpool obviously does not want to accept responsibility for this problem, even though there are many other people having the same problem with this type of washer.

I bought a whirlpool cabrio with high hopes. Unfortunately, it has been the worst washing machine I have ever had. Then I moved in with my fiance and he too had a cabrio. It too is a piece of junk - and brand new! Every load comes out with left over residue and the clothes look worse than before they went in! I have tried everything and I do mean everything! IM 41 y.o. - IM well aware of how to load a machine. I load it just the way the instructions say: as if there was an agitator there. Ive tried using no laundry detergent or fabric softener - clothes still come out disgusting. Ive made sure the screens are clean, doing extra small loads, turning on the extra rinse, everything! Ive called whirlpool, but there is no such thing as customer service anymore. They just blamed me for not loading the clothes properly and blew me off. The machine becomes unbalanced very easily (it is leveled on the floor), sometimes the clothes are still soaking wet at the end of the cycle and sometimes all knotted up. This is a horrible machine!! I wish I could say it makes me feel better that IM, by far, not the only one having issues with this piece of junk!

I purchased this machine, a Whirlpool Cabrio WTW5640XW, from Lowes on Dec. 11, 2010. I just realized today, Dec. 24 2012, I had a 2-year extended warranty plan! Shame on me. At any rate the washing machine is very hard on clothing, tearing light fabrics and ruining my wifes bras. The clothes often come out with shreds of fabric from the other clothes in the washer. Oftentimes, it will not complete a cycle because it constantly goes out of balance. Today I paused the machine halfway through the wash cycle after the soak cycle to throw in some more laundry and start the cycle over. Half the clothes were still dry! Yes it may save water, but if you only use a cup of water for a load of clothes, how well can it clean? My wife has sensitive skin. So now we wash a load with extra rinse and normal soap then run the cycle again with no soap to get the soap residue rinsed out. Were saving big now! Yes, we are using HE detergent and the recommended amount. The machine is pure junk. I would love to see a class action suit against Whirlpool for selling such an inferior product. I know thats asking a lot in the land of no accountability we live in today, but one can always dream.

Had some dishwasher liquid soap on some glass mugs. I washed three times and it still would not come off. RIDICULOUS. Will NEVER buy Whirlpool again. Quality has gone to you-know-where.

This unit is without a doubt the best microwave I’ve owned. It is reliable, cooks to desired doneness. It defrosts and rewarms perfectly. For the price I do not believe that there is a better performer. Would highly recommend with no reservations.

The Whirlpool range has worked effectively and efficiently for over ten years. We have experienced no problems. It is used several times a day to prepare meals and bake items. The cook top gas burners ignite easily, provide equal flame distribution, and the oven has an air blowing feature that makes cooking and baking much easier. One reason we chose Whirlpool was because this brands stellar performance history, its appearance, and its functionality. Overall, we could not have selected a better appliance for our use. We can unequivocally state that was and still is a solid performer for its cost.

I have had trouble with this AccuBake stove since four months after I bought it in 2011. First, the clean cycle would work intermittently then would not ignite to bake, broil warm or clean. All burners would light intermittently. Every time I had trouble, I called the service tech from Homestead Lumber, where I purchased the product from and he could never find anything wrong. Product would work fine whenever he came out. Finally, it acted up in May of this year while the product was still under warranty and while the service tech was here. The tech replaced the circuit board. One month later, Im still having trouble replacing igniter. Four days ago, Im still having trouble. This stove stinks. Right now, I wish I had my $959 back for the stove and wish Whirlpool had it stuck up their butt.

We had the Whirlpool electric range delivered yesterday. The clock light is too bright! Keeps the house lit all night! Do I really need to pay the cost of burning this? Additionally, it’s so annoying that we will not be keeping the range. If I needed a nightlight, I would buy one. Very poor design. The lights on the other appliances go out when not in use, one would think the range would have been designed to do so as well. I have NEVER had a problem with a stove light being too bright. This is ridiculous.

After 25 years my Maytag died. It was a Sunday so we just decided to go to Lowes & purchase a new one. They could not find my 1st choice so I bought the Cabrio. It is the worst washer I could have purchased. It determines the amount of water you need. Our clothes never seem to be clean & its very noisy. It has no agitator & is supposed to save water. Even putting it on the longest cycle our clothes do not appear to be clean.

Whirlpool washer is junk. Expired I. Less than 4 years. Cost to repair is more than new washer. DO NOT PURCHASE WHIRLPOOL PRODUCTS. Agitator motor burned up without notice. No troubleshooter problem. 2 repairmen suggested I buy new washer.

We are so disappointed in the purchase of this machine! It doesnt put enough water in the machine to clean the clothes, and the spin cycle has continuously gotten louder and louder to the point I think its going to explode when it spins! Is there any recourse we have or any recalls on this machine?? Thank you for your help!!!

Updated on 03/15/2020: We bought this eight years ago to replace a 20-year-old Maytag that had finally developed a rust-related leak after serving us faithfully and needing only one almost trivial repair ($10 DIY lid switch replacement) over that period. I have replaced the water pump, the gear case, rotating seal (3 times), the lid switch striker (3 times), and the replacement gear case is making noises indicating incipient bearing failure. In its finite wisdom, Whirlpool decided to make the failure-prone main bearing irreplaceable, which means you have to replace the entire gear case, at a best-case cost of $120 and a worst-case cost of $300, plus labor, unless you do the work yourself, as I do. The secondary issue is mold and a musty odor. The most effective way to eliminate this is to pull the drum (non-trivial, requires a car jack, a 2x4, and a special spanner/wrench) and swab down the inside of the tub with disinfectant. (Been there ... done that three times over 8 years.)Original Review: I am in the process of replacing the bottom seal on my 6-year-old Whirlpool Cabrio (WTW5500XW2) washer. This will be the fourth major repair I have done on it. Fortunately, I can do the work myself and know how to find the best price on parts, but it is still discouraging that a lightly-used washer would have so many problems in such as short time. (It replaced a 20-year-old Maytag that finally rusted out.) Repairs to date: 1) replaced drain pump motor; 2) replaced lid switch; 3) removed basket twice to clean outer tub, due to mold and odors; 4) replaced suspension rods due to excessive spin vibration; 5) out of commission awaiting a new bottom seal. Total cost of parts (labor was on me) is well over $100.

I just love the durability of my machine and the features that it offers. It does a great job washing my clothes and I feel like its a solid appliance that lasts for many years and its good quality for the price.

First my pump went out on a 4 month old washer. Had to wait several days for them to fix it. My washer worked for two weeks and same problem. Its been over a week and the service man cancels then shows up and tells me pumps out and can get one for several weeks. I cant stand them still not fixed.

Had this model (WMH73521CS-6) installed as part of kitchen remodel. After 8 months, microwave is failing, indicating door needs to be opened, then closed to operate. This does not fix the issue or reset the condition. AND, there is no way to reset the microwave electronics, not even power cycling (unplugging and replugging from/to electrical outlet).

Moved into a house with a 2009 Gold Series Dishwasher model GU2475XTVY0. It has never worked since we moved in 3 years ago, always left dishes musty and poorly cleaned. We basically used it as a rinse/dry and pre-washed everything by hand. Even then it would mold up frequently and required manual cleaning. Total piece of junk, but looked really nice, stainless finish. Yeah.Latest chapter is it completely stopped working. Called a tech out for the usual $80+. His advice: this is a total lemon, and has been from the start. Not worth repairing. So Whirlpool, is this the standard you have now? 5-6 years for a dishwasher life cycle? Noted that my fridge is a matching 2009 Gold series, it has also had several problems with keeping a steady temp and has gone through 2 control boards at a hefty fee each. I guess Im done with Whirlpool, running out of appliance brands to blacklist here...

This unit has been in operation for over 40 years. It recently developed a freon leak. Rather than repair this unit that uses out of date freon I am going to replace the unit. I have had to replace the contactor twice and had to service the condenser fan once. All in all I think I got my money's worth.

After having 7 refrigerators breakdown all for the exact same exact reason, a $12 part, Whirlpool will only take the stance that you could have bought the extended warranty. So theyre happy with you spending $150 each time the repair guy comes out. 7 refrigerators all for the same reason and theyre only 3 years old. Do you really want to purchase a Whirlpool product after that? We are a development that has furnished are condos with Whirlpool but will no longer.

I bought a Whirlpool fridge 4/23/2013. Thanksgiving it went out. I had a repair company come look at it to see how much it would be to repair. He said the compressor was out, it has a freon leak, and the electric board has a relay that is acting up. Basically it would cost $600 or more to fix. I only paid $750, mind you. Whirlpool customer service said if we pay to have it fixed then send them the paid receipt. They would then give me a 6 month service plan for future repairs if needed. Please tell me how that helps me now? A voucher for $200 or offer something to help me now. Not a happy customer. Thanks for nothing Whirlpool.

I purchased two Whirlpool refrigerators 9 years ago and this year, 2018, both of them died. Bad compressors that cost up to $700 to replace. Repair folks would not guarantee them as there could also be other issues, like leaks in the internal parts of the refrigerator. I have a 20 year old frig (Kenmore) in my garage than runs great, no repairs and is in a non heated area. My conclusion is that that Whirpool reduced cost by making cheap products.

Where to begin? I bought Whirlpool Duet Front-Load Washing Machine about 11 months ago after my top load bearing went bad and start making a lot of noise after 8-9 years. 4 months ago (6 months from purchase) it started to act strange; washing machine will not unlock after a cycle, start throwing F3E1 error. Thats when I first called their support service. Their service technicians are very nice actually. They seem to be local small appliance shop, contacted out by Whirlpool, from my guess. Initial visit was to inform me that Im using WAY too much soap, while I was only using well below what was recommended by Whirlpool manual. RED FLAG #1. Technicians told me to stop using too much soap or start using POD. Also to flush my washing machine with 2 cups of white vinegar in hot cycle every few weeks. Ive changed my soap to Tide POD and starting flushing my washing machine immediately after he left my house. It was running OK, but I still saw F3E1 error at the end of every other cycle, until... thing went really bad one day, it simply stopped responding any command while clothes was still in the washing machine. I unplugged power cable and plug it back, it hums for 10 mins and in the end it was the same result. After several attempt, it finally unlocked itself, thus I could wash my clothes at my parents house. This is when I called support service 2nd time. The same technician came and this time, I had video recording of everything. He could not dismiss this with simple soap theory, so he opens up the washing machine and tells me that its due to bad control board. He proceeds to order new control board, which took a few weeks. New technician comes back with new control board and installs, runs a few test command (not full cycle) and leaves. During this whole time, Im left with no washing machine at home. Good thing I travel sometimes and laundry is done remotely sometimes. This repair didnt improve the situation much. I called them back for another appointment. Another technician comes back and tells me that Whirlpool sent back BAD control board. Now, Im really suspecting their product is really piece of **. At least at this point, I was still happy with their service. He leaves my house claiming that they will order new control board and re-install.A few days later, I receive a call from a lady, claiming that Whirlpool has instructed them to ask me to use different outlet, since they believe my outlet is causing issues. Now Im really pissed. Coming from electrical engineering background, I know theres always any chance, but they should double check this with their own technicians. Anyways, I perform their recommendation, which I knew was a shot in the dark. During this whole ordeal, Im working on a project that are out of state (CA). Not only do I have time to stay home for all these service visits, but Im not even home to test my washing machine. During one of the holiday, I was able to take a few days off. This is when I decided to take different approach. I went to the retailer, whom I purchased my washing machine from. They were also nice, but theres so much they can do.I called Whirlpool direct line to explain my situation, how unhappy I was, and to replace my washing machine. Their response was by the book: We can only execute our warranty policy and replacement is not part of warranty. The representative specialist had enough nerve to ask me why I have not called back in several weeks and continue to repeat it as if its my problem for not reporting back. I had spent 2 months of supports and 4 site visits, where I had to reschedule my work or take a day off, before travelling for projects after holiday seasons. This representative really took customer service to next level of hell. In the end Im without properly functioning washing machine for 4 months. I have to coordinate with my parents to use their washing machine when Im back home. My advice, you should really think 3 times before buying Whirlpool washing machine or any other appliance. Also consider that youre on your own, when their product malfunctions, and youll be sitting on dead appliances.

Bought a new Cabrio, worked ok but in less than 2 yrs the bearing is bad. It will cost almost as much to repair as a new washer. Will never buy a Whirlpool product again. Would give negative rate!

Have had this washer for one year. Clothes have never been clean since day one. Dark clothes come out with white marks all over. Having to use an extra rinse cycle or set on bulky items - whats the point of a high efficiency appliance? Still not clean after that anyways. Stains such as chocolate and toothpaste still remain after washing and my husband complains of finding small holes in his clothes. Lid needs to be left open at all times or you get a funky smell. I am using the HE liquid detergent, even tried a cold water product for cold washes. I hate this washer. Wish I had my 20 year old Kenmore still.

Does clean well but I notice that even on heat drying there is still water on the inside of the door when I open it. I have loaded it up and even the glass baking pans came out sparkling. I would recommend this middle of the road priced dishwasher.

I can add my experience with the many others I have read about. My Whirlpool Cabrio washer top lid glass broke in the up right corner after only 2 months use. Like many other reports, this is not due to something falling onto the lid. It happens without warning and without operator interaction. This is a defective design!

The machine purchased in 2011, 3 years old, will cost as much to repair as to buy a new one. I got exactly no satisfaction from Whirlpool. They said there is no recall so they wouldnt assist. There are only 2 people in my house, so how could the washer be so junky. What would a large family do? I have spent $140 and wont spend another dime on a Whirlpool appliance.

This microwave oven has worked well now for about six months and overall we have no complaints. My only complaint is that it has a cheap feel to it, especially when the door is closed...it creates a rattle type hollow noise....it just does not sound like it is well made. Time will tell I guess. The unit works well and heats fairly evenly. The cook options are plentiful but we rarely use most of them as we are usually merely re-heating food or coffee. The defrost cycle does work well for us.We purchased this microwave oven as well as a Whirlpool Range and Whirlpool French Door Refrigerator at the same time from a small Home Depot. Whereas that store had the microwave on display it did not have the other two on display and therefore we purchased them sight unseen....a BAD, BAD mistake. I have reviews for those two so I will say no more about them here. Thus, overall, we are very pleased with this Whirlpool Microwave Oven and would recommend it.

I have enjoyed my stove for 16 yrs, it is very reliable and easy to use. The heating elements work well and heats up quickly. During this time I have not had any repair done. The areas of improvement that needs to be implemented is the inter glass that is installed at the front looking into the oven. In order to clean you have to take the front door off which is very difficult to put back together.

We purchased a Whirlpool Overhead microwave and Quiet Dishwasher in May of 2017. Within the first year, the microwave needed new sensors installed. The repair person said this was a design flaw and he was getting many calls. Then at 13 months, the dishwasher wouldnt drain. The repair person fixed the problem and left reset directions because this can commonly happen. Now at 18 months later, the drainage problem wont resolve even with the reset. Whirlpool extended the warranty by 6 months but wont cover this repair. Two appliances, two problems. Dont buy Whirlpool.

My dishwasher is more than five years old. The water jets need to cleaned regularly. A little noisy but I can chalk that up to age. I use 1 or two packs of detergent. Sometimes, if I don’t pre-wash, I need to run through the cycle.

Quiet Partner II - Our dishwasher racks started to crack and rust very quickly, about two years after purchase. We repaired the racks and tines, but the rust got worse. We replaced our dishwasher today with another brand. Many of the tines on the drying rack had rusted and broken off. We have been told to only purchase Nylon racks. I hope this is good advice. I must admit I had no trouble with the machine as far as cleaning my dishes. I just felt the racks should last longer than two years. Cost to replace racks was about the same as replacing the whole machine.

My side-by-side refrigerator leaks water. I find water on the floor but we cant find the source. When I called Whirlpool, they stated its not under warranty, but we can schedule a repair appointment, I declined. Im still looking for the leak. Its intermittent, sometimes I dont see water for a while. The last fridge we had, we had to get rid of it because the sides and front got too hot to the touch. I was afraid it would cause a fire.

Whirlpool water heater FG1F5040T3NOV - I noticed that when I was taking a shower, my hot water wasnt working. I went downstairs and the pilot light on my water heater wasnt on. I tried to restart it. The pilot light wouldnt work or relight. I gave up and contacted a plumber. I dont feel I should have to pay for a plumber when its a product flaw!

I had a Whirlpool washer that was 31 years old so when the motor went out I bought a Whilpool Cabrio. I HATE it!!! First, it takes at least an hour for 1 small load to finish. Then the clothes are not even clean and rinsed all the way. Dry patches on clothes and where the soap did reach the clothes there is white soap scum all over. I tried using the extra rinse function and still soap everywhere. Im hardly using any soap to begin with. I have to wash some things twice to get the soap off. Thought I was doing good by buying HE. What a waste of money. I cant wait til it breaks which should be soon according to all the previous comments. I have only had it 4 weeks. Dont buy this machine!

The pilot light went out on our Whirlpool hot water heater. We followed instructions and were unable to relight. Our plumber was also unable to relight so we ordered new parts with associated overnight express costs. The plumber returned and worked for over an hour. When the pilot light came on the burner assembly burned out the new thermo coupling and that needed to be replaced again. This happened again. I would like to join the class action suit as Whirlpool has known about this problem and consumers are paying more than the original cost of the unit for repairs.

I purchased my new washing machine in September 2011. When I removed the clothes from the washer after the first wash, I noticed that there was soap on several of the items. I ran them through another rinse and spin cycle, and there was still soap on several items. In an effort to avoid this problem, I no longer use the soap dispenser tray, and use the bulky cycle to get more water in the tub. Like most of the others, the clothes are tangled and stretched from one side of the tub to the other. Also, it takes 1 hour and 36 minutes to run a complete cycle. The manager of Sears tells me, that because of government regulations, that in a few years, you will not be able to buy any other type of washer. I purchased this machine, because it was highly recommended by Consumers Report magazine. I filed a complaint with them eight days ago, but have not had a response.

Have dishwasher wdf530plyw6 less than three years. Will only run on 1 hour cycle. No other wash option works. Called company, wont fix, offer other warranty plan. Utensil holder broke early on.

The machine meets our needs and just the right capacity. It has just the right number of selection for proper washing. Very easy to load clothes and remove from the washer. There were a number of colors to select.

Purchased a Whirlpool washer 14 months ago... however just unboxed the washer. Installed it in our new home. Now after just two, repeat, two months of use, there is water all over the hardwood floors... The front door seal is gone to the tune of $100 but what about my floors!!!!!! Im so discouraged after reading all the complaints that Im falling out of my chair. Seal design has been the same on most all their front loaders. DO NOT BUY A FRONT LOADING WHIRLPOOL WASHING MACHINE. YOU WILL BE SORRY YOU DID. Yes they look pretty. My parents old top loader washer lasted over 35 years without a repair and we washed clothes for four people.

Top loading Washing Machine Model #WTW4950XW2 - You would think that a big company like Whirlpool would make quality washers. NOT! Our top loading washer bought in late 2011 has been making loud noise during the washing cycle for the last 6 months, and last night was struggling to spin. Seriously, with just my wife and myself using the washer once a week, this washer should last over a decade! So I called Whirlpool and explained the problem... and, as expected, they cannot help me as it is over the one year warranty. NO MORE WHIRLPOOL BRANDS FOR US!

Cabrio Whirlpool washer - I hate this washer. Had it for about 3 years now and it will not spin out and does not give a code. Called a service tech out and they cannot find anything wrong with it. The water goes out but will not spin. It sits on 20 minutes and does nothing. Will not buy another Whirlpool washer. Wanted a good washer and got a piece of junk. Will not recommend it to anyone else. Think Im going back to the old style.

The exhaust fan for the gas range runs when using the microwave. The noise is loud and very aggravating and there is no way to turn it off. From what I can find the older models there was an option to turn it off. On the new models Whirlpool cut costs by not putting a small (QUIET) fan in the microwave but used the range fan for a dual purpose.

It is a double oven. Temp varies too much. The oven is very inconsistent. Cooking Thanksgiving the temperature would not stay even. It took much longer than intended. It was quite frustrating. I would not recommend the Whirlpool double oven.

My Whirlpool Gold, French door refrigerator is 3 years old and just died. The most frustrating part was trying first to go through Whirlpool.com to have them schedule a repair service call. It seems that when I added my zip code and address, their program automatically changed the zip code. So an appointment was scheduled for a repair company that is 4 hours away from me. In calling Whirlpool back (another 30 minutes on hold), they again attempted to insert my address and zip code only to find the program changed it again. I got NO assistance. I finally did find someone (through Thumbtack.com) who found that one of the 3 circuit boards that tell the compressor to cool, was bad. Its going to be 10 days before I will have a refrigerator again and after spending 2K on it, makes me angry. I will never buy Whirlpool again.

The washer (Cabrio WTW7800XWO) was less than 2 years old and we had a motor go out, so we paid a repairman to come out and repair the machine. The total cost was over $300. Now 2 months later, we get another code on the machine and Whirlpool says, We are sorry but there is nothing we can do, but if you would like to pay $219, we can get a repairman out there to check out the machine and repair it. Theyre also giving the machine an additional year warranty. Shortly after that, I noticed the lid was not staying up when I opened to put clothes in it to wash. So since I was wondering what was happening, I looked at the lid and to my surprise, the springs that hold the door up when open are built into the plastic lid cover that has a see-through glass on it. Right where the springs are located, it must be a stress point and the plastic lid has since cracked and is almost about to break off. I am now in the process of ordering another lid and Whirlpool offered to sell me a lid for $226 but I think I shall buy it from someone else as I dont want to put any more money into Whirlpools pockets. We paid over $1000 when we bought this machine. Now it is about 2.5 years old. I hope there is a class action lawsuit on Whirlpool as I will definitely join in if there is. This company needs to go out of business if they continue to sell machines like this that have so many problems especially when they are less than 2.5 years old. Goodbye Whirlpool. You have lost many more customers as I shall be letting everyone I know about all the problems and complaints about this machine.

Extremely disappointed!! We purchased this water heater about 4 years ago and for the past year we have to manually turn on the burner. Its been a nightmare! We called Lowes to purchase the parts, but they do not sell the parts. There was a nine year warranty. Our last water heater lasted about 11 years. Its such a shame that this one is giving us problems just after 3 years. Im really considering just buying another one. I dont want to continue struggling with this one. Its been a bad purchase and coming to find out that Im not the only one with this problem. If its a defect Whirlpool should at least replace them for the inconvenience. They should take responsibility for selling defective products.

Duet Washer GHW9150PH0 - The washer is about nine years old. Last year I got the dreaded F-11 error code, and had to purchase a new controller board and install it. Now the spider arm on the basket has snapped (cast part). Ive been on the phone with Whirlpool for over a half hour now, and all I get is We have to send a service tech out, and you have to pay for them. I have the broken part in hand, I know the Whirlpool part number, yet they want me to pay for a tech to come see the part and confirm it. Ive been unable to talk to a manager yet, none are available.Eventually the lady agreed to replace the broken basket, after telling me at least five times she could not, but she refused to replace the tub which was destroyed when the basket broke. Ill be calling back to talk to another agent soon.

We purchased our basic Whirlpool refrigerator model # WRT318FZDM05 from Lowes on September 13, 2019. We bought one of the more basic models available because we have owned higher end fancier refrigerators which have had multiple problems and not worked. So this is the 18.2 cubic feet top freezer model. About six weeks after owning it (conveniently just past the 30 day return window at Lowes!) we began to notice that our freezer wasnt freezing properly or making enough ice. There is only one control panel in this basic fridge so we turned it up. While this cranked up the freezer, the refrigerator compartment began to freeze its contents. So we had to choose between soft serve ice cream and refrigerated eggs and milk or hard serve ice cream and frozen eggs and milk! Finally after the holidays the certified Whirlpool appliance technician came out and recommended a repair with replacement of start device and control board. His report: Freezer not freezing, found the compressor turning on and off. The refrigerator was not even 4 months off the floor and the problem began when it was only 2 months old! When you call the Whirlpool number heres what they say: Welcome to the Whirlpool customer exp. For over a century weve believed in everyday care. Lets see how we can care for you today.Well, when someone calls with a very recently purchased refrigerator whose START DEVICE and CONTROL BOARD no longer work properly that person should be able to return the defective appliance and get a new one. Nope. Not with the Whirlpool experience. You are told that youll have to wait and see if those devices which are ten days away from being replaced in your new refrigerator will fix the problem. So basically NO do not buy from Whirlpool. Turns out a century of everyday care (??) hasnt taught them much about how in this century people need a refrigerator that works everyday!!!!

Model GB2FHDXWS04 - This refrigerator dumps water all over the floor at least 1 time a week. We just leave a towel on the floor to absorb it because you never know when it is going to happen. Have removed the stuff and cleaned all of the ice out of the bottom of the fridge but in no time it is back. What a crummy unit. I am going to drill a hole in the bottom of it and put in a drain I guess.

My wife and I purchased the Whirlpool French Door Bottom Mount Refrigerator in April 2013. Thank God we purchased the extended warranty. In June 2014 the ice maker quit working and delivering water. We have had the service contractor that WHIRLPOOL has qualified for all repairs. They have set up FIVE appointments to resolve the issue, all of which I had to leave work to meet because they do not provide any scheduled service outside the hours of 8am to 4pm. The first time they came the service man told me that WHIRLPOOL RECOGNIZES THERE IS A DESIGN FLAW BECAUSE THESE ARE NOTORIOUS FOR FREEZING UP AND NOT WORKING. I asked the repair man if there has been a recall because of this, he said no because WHIRLPOOL WILL JUST REPAIR THE ONES PEOPLE COMPLAIN ABOUT! I called Whirlpool headquarters today. The advisor said he will register my complaint. I asked, Is that it? What does that mean? He said, I cant tell you what happens after I register the complaint. I WILL NEVER PURCHASE ANOTHER WHIRLPOOL PRODUCT. I hope this may help someone NOT make the same mistake. If you need to talk to someone in upper level management to discuss your issue, forget it...they want the position but no accountability.

Its a great machine but the temperature control button is easily moved at times. The machine does a great job in washing clothes. Ive had mine for 10 years now and hope that I never have to replace it.

I spoke to Sue in Tennessee that refused to let me speak to a supervisor regarding replacing a light bulb in my microwave. Sue insists that I can do this, despite no instructions in the owner’s manual and warnings all over about electrocution if I open the panel. Sue refused to assist me and is sending out a repairman. I will never do business with this company again, and I am angry that Sue refuses to see a problem with me paying $75 to replace a light bulb in a nearly new microwave. She continued to give me incorrect instructions on how to replace the bulb, and the owner’s manual does not have instructions nor do they exist on the internet. The owners are not supposed to dismantle this model, but Sue at Whirlpool Customer (no) service told me that I have to pay. Seriously? For a less than two year old microwave? Never again. I think I will take this unit out and get a GE.

This dishwasher is disappointing. Very noisy. Water consuming, and does not clean dishes properly. In addition not much options with timing settings. There are just few setting options and each take long time.

Our countertop Whirlpool microwave oven is just over two years old and one of the led lights in the clock display just went out. The push-button opening mechanism is very hard to work and quite loud when the door is shut. When the timer is set but the start button is not activated for a few minutes, the door warning goes on and you have to reset the timer. There are five beeps that indicate when cooking is done and they continue even when the door is opened. The only way to stop them is to push the stop button and there is no way to adjust the noise level or number of beeps.

I live in Florida and in December 2012, purchased a Whirlpool upright freezer from my local Badcocks. About two months after the purchase it started making this weird loud sound. I contacted Whirlpool and they sent a local appliance company technician out to check it. The technician ripped my brand new Linoleum floor when pulling out the freezer. The result was, in his opinion, nothing was wrong with it, that the loud sound was normal. As it continued, another tech came out and his opinion was it needed a new compressor. So, it was replaced and lasted about a month. I was getting something out for dinner and noticed everything in my freezer was unthawed... all that money wasted a freezer full of food gone. So, Whirlpool once again sent the same appliance company out but a different technician. This one said it that he needed to order parts which he did, a different tech came out to install the parts and told us he didnt know what they were for and our freezer didnt need the parts the previous tech ordered. So this tech put dye in the lines and left. The dye leaked out from under my freezer all over the floor which is now stained because of the dye that leaked. This is the brand new floor they had already ripped during the first service call. So, now not only is my floor ripped but stained as well.Once again, about a month later, I find my freezer full of meat unthawed a third time. Once again I called and find out they have dropped the contract with the company that came out the first two times. So they refer me to another local appliance repair, and this new tech says that it needs a new compressor. This will be the second new one in less than 6 months. They order that part and repair the freezer; this fix lasted for about three months this time. On my fourth call to Whirlpool, I expressed my frustration with losing my food and the hassle of an inferior product purchased brand new under warranty. I definitely was not satisfied with the service and the customer service representative could not find my warranty record. He was also very rude and when he finally found my record, he told me I was no longer under Whirlpool warranty. This was wrong as I have my paperwork showing date of purchase AND the four-year extended warranty we purchased as well. I asked him what they would do for me since their inferior appliance and incompetent repair technicians cost me hundreds of dollars of ruined meat and other frozen food. He said they would do nothing except have another repair tech come out. Until the freezer is determined to be unrepairable that is all they can do.So I scheduled the tech to come out the fourth time and he found that some untrained tech had put oil in the line and the lines and compressor has to be replaced and flushed. I have already not had a freezer for a week waiting for tech to come out and now the parts are put on back order for another three weeks. The fourth repair tech called Whirlpool from my home, while I was standing there, and told them that it basically is beyond repair because of the price of parts and labor. He told Whirlpool it would be cheaper to replace the freezer but Whirlpool told the tech to replace the lines and compressor and flush everything out. So three weeks later, he comes back out on 10/13/2013 to make the repairs. I bought this freezer in December 2012 for $1200 and have been dealing with issues on and off since Feb. 2013 and now its 11/29/13 and once again my freezer has stopped working. I have lost all my food because Whirlpool sold me a defective appliance and would not make it right. I have asked them to replace it and they wouldnt. My husband and I have just purchased our second house and we were very excited about the remodel coming up in the kitchen. We were going to purchase stainless steel Whirlpool appliances, but after this company has treated me so badly, I will not buy anything with the Whirlpool name for our stove, dishwasher, microwave and refrigerator.We probably would have spent about $3500 on appliances, but we will purchase a different brand and give our $3500 to a company that will treat me better as a customer .I used to have trust in this company because it is well known for quality products, but I dont trust them anymore. I will advise any of my loved ones and friends not to purchase any Whirlpool appliance because of the inferior quality and lack of interest in making this situation right. I tried for almost a year and gave them 5 opportunities to do the right thing and now Im done. They dont care about the customer and that is a shame because they have lost a valued customer. As of now I have another tech coming Tuesday b/c my freezer is sitting not running again. Model #EV201NZTQ02.

Whirlpool Duet pair. Like Whirlpool products and have had good experience with them. Have had the pair for 3 years. Like the way they wash and dry. Clothes do not take a beating. Only dislike is the vibration on the washer. I look for capacity and extra features such as: steam option and extra cycles. Now I also look for noise and vibration. Would definitely like to stay with Whirlpool. Definately cost is important, but for the sake of a few dollars more the options and the brand are something to be considered. Having a steam cycle and wrinkle cycle are important in any dryer.

Bought a Maytag Bravo XL Top-Loading Washer Model MVWB880BWO. It was installed on Jan 22, 2014. In December, the spin cycle became very loud. I contacted Whirlpool on Dec. 2. They said a local technician would be out on Dec 5. They make up this date. I called the local technician. They came out on Dec 16. I was informed that if there was nothing wrong with the washer, I would have to pay for the service call. The tech. found there was a bearing problem. He said they would contact Whirlpool about the warranty repair. Had not heard from the repair shop. Today is Jan 5. I called the local repair shop. They said they were waiting to hear from Whirlpool. I called Whirlpool. (Thats another nightmare). They said they were waiting to hear from the tech. The man at the repair shop said he has been trying to get a hold of the rep for our area in Eureka, CA. Apparently he doesnt return emails when he is in training and apparently he is in training most of the time. It is totally unacceptable to have to wait for over a month to have a washer repaired. Not sure what a consumers recourse is for getting something that is under warranty repaired in a timely manner. Maytag used to be a good product. Since Whirlpool produces the Maytag, the quality just is not there. Very poor service. I would not recommend buying Whirlpool. You will not be happy with their product or their service.

My husband purchases Whirlpool washer years ago. Started acting up after 18 months. Wont spin, stays locked, clothes are soaking wet. Used troubleshooting website. Spent over $200.00 in repairs... including new board. Still doesnt work properly. Whirlpool customer service recommended buying a extended contract for over $300.00. I could have bought a $900.00 Maytag by now. Total disgusted with machine and customer service. Will never buy Whirlpool again and have told everyone by word of mouth and on facebook about this situation. DO NOT BUY WHIRLPOOL!

Whirlpool cabrio wtw7800xwo - During the 12th month of the use of this washer, the lid broke. I called Whirlpool to schedule a repair on it. I got someone here to repair it, and it was 7 days over the 1 year warranty. I don’t think this is fair when they sent the repair guy out too late when I scheduled this right before the 1 year was up. I came about looking this up online, and I find I’m not the only one with a 1 year lid. My next washer will be a 1980s built to last. This was the worst $1,100 I ever spent. I had to choose 1 star. Wish it had a choice of - ★★★★★.

Oven was just about 3 years old when the oven bake feature failed the first of many times! Display says fault detected. Was able to get oven cleaning done and then it worked again but eventually has failed repeatedly since. Further reading and support from technicians has revealed its an oven control issue and replacement part is same cost as new oven! Apparently the oven control Whirlpool designed and installed cant handle heat!?? Very unreliable and would never buy their appliances again!

I purchased the Whirlpool Gold series cook top range-stainless steel. It is of good quality and looks very nice. It is also easy to clean and for the price it has a self cleaning oven. I didnt think that I would like this range but over a period of time I truly love cooking on it.

I have had the same lid problem with our washer. New in 2010. The lid just broke in the same place for the 3rd time! Called Whirlpool customer service. Yes they can find my account. No, they dont have a record of this happening to this washer before. Even though I called them and got the lids through them two other times!!! But they will be happy to send me a new lid for $260!!! Also love the fact that they dont acknowledge the lid is a problem. Time to find a new washer that isnt Whirlpool!!

Bought this machine in July 2015 to replace LG front loader that went bad. This machine is the worst at rinsing the soap out of dark clothes, and probably the whites and lights too! Dark clothes always have white streaks and spots all over them. Called Customer Service and was told it was due to too much soap, the way the clothes were loaded, needed to add an extra rinse cycle to load, and/or because there is a water softener in the home. Have changed soaps 3x, changed the way I was loading the clothes, and I doubt the water softener has anything to do with this problem. I dont see how adding an extra cycle is efficient and seems wasteful. This machine is horrible and whether I just got a lemon or if its a defect in this machine, I dont know. Whirlpool doesnt seem to care either. I am going to attempt to sell this one and will not consider Whirlpool for the next one. Do not buy this machine!!

I hadnt had the machine. In no time, I started noticing brown rust looking spots on my whites and light colored clothing. I got to looking and had rusted out all around the bleach dispenser, entire area on the entire top. I was told to replace it. This would be about $200. Ridiculous!

Design is made so you will need a repair man to clean filter. The machine has to be taken apart to get to filter. About one hour of your time. If youre not handy its a paid repair About $250 to $300. Also the valves that control the water into the washer failed after about 5 years. An easy fix part costs about $60. All appliances are designed to fail after the purchased extended warranty expires. More features more repairs. So if you arent going to use a feature get a simpler machine. More money does not mean better machine. Or that it will last longer. The days of an appliance lasting 10 to 20 years are over.

Even the repairman said Whirlpool isnt making them like they used to even though they are charging more for newer appliances. The freezer has clogged, ice maker already broken, have to replace $400.00 for just the icemaker. As a real estate agent, I will make sure and let our new home buyers never to purchase Whirlpool again!

The machine has an infinite water level setting, an agitator which I feel cleans clothes better, separate settings for water temperature for both wash and rinse cycles, and the ability to soak prior to washing by just leaving the lid up. You can add bleach and fabric softener to dispensers that will add to the tub at the time needed. My machine has been a really good one.

After 12 months (warranty) the bearings had to be replaced, $300. 12 months later bearings needed replaced again for another $300... was told by the repairman not to waste my money. This would happen again in another 12 months. This is a issue with these washers. Opted to get something else. Very unhappy to only get a couple of years out of this machine. I have also had to wash some loads twice to get clean... unacceptable performance!!! Contacted Lowes & Whirlpool to no avail of course. Never again!!

I purchased a new Whirlpool Cabrio set, in 2009. I bought the top loading washer, and matching dryer. Since 2009, I have had the washer serviced FIVE times. Bearings, water pump, F1, F2, ul codes, and a few other things, I honestly cant remember. I love this capacity. But that is all I love about this machine. Today, the water pump went out again. I have been reading online regarding loose coins making their way into the drain pump, the hose, and other parts of the washer. I am diligent about emptying my pockets, but, obviously, someone in the house is not. There should be a trap for the coins, buttons, and any other debris that passes through, but, clearly there is not, and it appears I am not the only one with this problem. I am so frustrated. I paid almost $3,000.00 for this set. It was my very first brand new set and I have had so many problems with this. With all of the problems and all of the complaints, and so many similar complaints, why is Whirlpool not acknowledging them? Why are they not doing anything about it? Side note, my dryer works fine.

I am a mother of 4 children and 3 grandkids, I love cooking and baking. Before I can post a review on a product or appliance I like to wait and give it enough use to test it. About 2 years ago I purchase a Whirlpool range. I trust the Whirlpool brand because is durable, easy to maintain and simple to operate. After owning my first Whirlpool refrigerator for over 15 years, I am happy to post my review on my almost 3 years old Whirlpool gas stove and oven. I am a satisfied and proud customer of Whirlpool!

We purchased the Induction Range Whirlpool Model WF1910H0AS0 almost 2 years ago and bought the extended warranty that was offered by A.J. Madison. We started having problems about 8 months after the purchase. We have had technicians out numerous times and they couldnt solve the problem of the cooktop part of the range locking and beeping when we use the oven. I have made several calls to Whirlpool and basically was told too bad. I see that there have been several complaints with the product and they have stopped making it. On one repair visit we were told that they were replacing a particular part because they were having so many problems with the heat blocker that goes under the glass top that they made it thicker and were hoping that this would solve the problem. It did not.The thing that really has sent me over the edge is that last night I was just boiling water and I heard a pop that came along with a smell (electrical burning smell) and the range blew a fuse and now the cooktop part just shows the deadly error F47. I am so disappointed in Whirlpool and their customer service and too bad attitude. You would think when you are spend almost $1800 for a range that it would not have problems so quickly and pretty much render useless in less than 2 years. Also shame on A.J. Madison for selling extended warranties through a company that has such a bad ratings with the Better Business Bureau. The only reason I gave 1 star is because you cant have no star.

The washer buttons stopped responding after 19 months. Lid lock sensor didn’t work. Replaced control board because new sensor did not fix it. Went bad again after a week. I have to replace it. I think 1 year warranties are not enough for a major appliance.

I purchased my Whirlpool washer and dryer 4 yrs ago. I was planning on purchasing Samsung but the saleswoman at Gils in Bristol, RI strongly recommended this junk!! A washer and dryer should not quit after 4 yrs w/ a household of 2. The dryer never dried properly. Each load took 2 cycles. Yes, repair were called and we were told its a design flaw. The washer just stopped spinning. Repair will would have been $550. These pieces of junk were replaced by GE electric stackables. Fingers crossed....they are working satisfactory!

In August 2011, I purchased and had installed a Whirlpool Wall Oven RBS305PVQ04 for $1000+. In July 2014, the oven failed with blown internal fuses and a thermostat $225+. In November 2014, the oven failed again, this time with a failed controller board. Whirlpool claims there are no replacement parts after just three years! In calling Whirlpool customer service for help, they basically said tough luck! NO parts, NO adjustments, NO service, you own a boat anchor. I tried to buy American; boy, was that a mistake. So it cost me $415 per year to own this LEMON. DO NOT DEAL WITH THE WHIRLPOOL COMPANY!

Water heater failed to maintain temperature. ** heads (more than 2) sent out by Whirlpool couldnt fix it! Calling the company was a waste of time! They run you in circles. Will never waste my money on a Whirlpool product again!!!! This was not my first problem with this company, but it is my last!

Bought Whirlpool electric range in Dec. 2005..expensive..so the warranty expired a few months ago. The electronic keypad that controls the oven and lights doesnt work. The repairs will be $408 plus tax which is obscene, and are guaranteed only for 90 days.This after only 5 years of minimal use...just me using it.I will never buy whirlpool again.

Whirlpool oven WOD93ECOA501 - This oven will most likely lock up if you use the clean cycle. I wish there was a class action suit in California. This happened first time I used the oven. Very expensive to fix, and though it was 9 months after a kitchen remodel, it was not under warranty because we bought it early and it sat in garage, and Whirlpool could only use purchase date. This is not new technology. Upper and lower oven both locked. Wish I had bought a Blue Star oven, as my Blue Star cook top is fantastic and a pleasure to use. HAS ANYONE GONE TO SMALL CLAIMS COURT?

Thank God for this website and Frank of Dover (postings on Feb. 11, 2013 and Jan. 7, 2011). We just had exactly the same horrid experience with the lid on our Whirlpool Cabrio Washer WTW7800XW. Just as with Frank, our home warranty provider first accused us of abusing the machine. I merely printed out Franks comments and description, whereupon the home warranty provider reluctantly agreed to replace the lid. We also bought an extra lid and are keeping it in our attic for the next failure. Do not purchase this washer!

My Whirlpool washer Cabrio wtw5640xw0 is 2 years old. The computer board is shot, the FOES off balance. To repair would be 554.00 plus tax. I have to say this is the worst washer I have ever bought. My niece told me she just replaced hers that she got 2 years ago also. There should be a recall on this washer. Also I was told the washer and dryer should not share the same outlet.

When you buy a global brand name you expect it to work the first time around. If not, then you expect to have it exchanged not repaired. The microwave did not work out of the box. They made me take it to the shop for repair. I would have expected an exchange for another one and an apology from the quality control guy who should have checked it. Apparently Whirlpool (Mexico) doesnt give a rats ass about their customer base. Its all about getting as many units out the door with poor assembly and no QC.

Whirlpool washer WTW7800 Cabrio - I bought this machine in Oct 2010 for $900.00. This October, the lid started not closing. Next thing I know, the glass is popping out. After waiting on hold for 20 minutes, I was told there is nothing they could do but refer me to a repairman at a cost of $179. The glass is popping out. This is a defect not caused by washing clothes but poor workmanship. I am on hold again. I am calling channel 3 news to do a story and will not stop until it is fixed.

My refrigerator will be 3 years old in September. It stopped working two months after my warranty ended, in November Thanksgiving Day. I was so thankful that I had snow on my deck to keep everything cold. I had several family members in my house and watching my husband defrost a frost-free frig? This was a nightmare. Then a few weeks later, my husband company refrigerators did the same thing: freeze up and stop working. He defrosted theirs as well.I know that lots of consumers have had the same issue with any of the bottom freezer refrigerator doing the same thing. I think we, consumers, should make these company recall these lemons. Why should we have to pay more and buy more our parents had their appliances last for years. He had done this approximately 3 times since my warranty ended in September of last year. The problem is the food goes bad, the freezer ices up, causing the refrigerator to ice up and stop the air flow.I contacted the company and this is what they told me: I had to pay $295.12 to get the repair completed. It was the DEF control board. I guess others have the compressor go out and that cost over $600 to fix. Why is it our fault as a consumer buying their products promised and concern for 1 year, not 10 years. It is no wonder why America is broke? My question to the Whirlpool was, how on earth can this be the consumers fault? Here is their reply:According to the model and serial number provided, we do not indicate that there are any known recalls with this particular model. A recall requires that a product poses a threat to a persons life or health. Since this is not the case in this instance, we do not have a recall. Once a product warranty has expired, any costs for maintenance, service, or component replacements are then within the owners time frame of responsibility. Taking this into consideration, I regret to inform you that due to the age of the product, we will be unable to assist with the cost of the repair. If you have purchased an extended warranty, we would recommend contacting your extended warranty provider directly to discuss the options they provide.Oh, they sent me a postcard asking if the repair service I received was good... Yes, the company who came out did a fantastic job. I think I may have to call them back; it is acting up again. I have 90 day warranty....

We bought a refrigerator Model# WSF26C2 EXB last June 2012, and it broke down! Our one-year manufacturer warranty did not cover for any food loss. We would not recommend Whirlpool refrigerator to anyone. We called at 12:30 pm and they could not send anybody out to repair the refrigerator until the following day. Bottom line is, there is no compensation with Whirlpool.

Purchased a gas stove June 10th, three days later smelled gas. Called the store where I purchased item, they gave Whirlpool 800#. They set an appointment 2 weeks out. Got part then burners only clicked. They ordered more parts. Now top range works. Started to use oven and got extremely hot. Called store. They referred back to Whirlpool. After hour and half they scheduled appointment. First appointment he didnt have tools to check temperature. Rescheduled for following week. He said oven was off 30 degrees. I then went to store to ask to return item. They said up to Whirlpool. On phone with Whirlpool over two hours, them switching from one department to another. No help. They insist on fixing again tearing up unit in my new wood floors. Dont buy anything from them.

I have a new Duet Washer and it is a nightmare. It keeps throwing the same F8 E1 code. The repair people have replaced five parts and been out four times. I feel like I have been scammed out of $900. I will never purchase a Whirlpool again ever!

The salesperson was great but we are not happy with our washer. We already had it swapped out once because of white spots showing up on our clothes. The only thing they could think of was that the bleach I used wasnt rinsing out completely so it showed up on our clothes. Recently, I washed a table runner by itself and it had some red in it. Now there are red spots on a couple of items that I washed after the runner. My husband just now asked why there were red spots on a shirt that he wears all the time. I explained. Also, we have had some white spots on clothes and I could scratch it out without leaving a permanent mark. Were no longer using bleach and we use only liquid detergent and all of it is HE. So I dont understand the machine. I hate it.

The Whirpool refrigerator does exactly what its intended to do. It has no ice maker or water dispenser and thats just what I needed. But the plastic produce drawers do have some cracks because the quality of the plastic is not the best.