When you first get the washer it looks like it can get the job done. Its the brand name and you trust to get the best clean from the washer. After a couple of months I dont see them clean. It washes with a couple of shakes back and forth and when my clothes are ready they seem like they were dipped in water. Not clean. It has all these fancy buttons for all different types of cycles and loads and they all seem to wash the same. As a mother of 3 kids I want my kids to put on CLEAN clothes. Not clothes that look like they have just been dipped in the water with detergent. I feel a good on cleaning board and my hands do a lot more than these high priced washers.

I bought a water heater in 2008 from Lowes department store. The heater would continually go out causing no hot water. The company had sent several technical repair men out to resolve this problem, and still the problem remains. The Technical Support requested that they will pay for the part and I could install it, not knowing if I am able to do such a job. The technicians who were sent to my home were not able to do the job. How do they expect me to do the job without proper experience? Whirlpool products are not reliable nor is their maintenance contract. Stay away from this company.

I have a 2 year old Whirlpool refrigerator with french door refrigerator on top & freezer on the bottom. I am now spending almost $700 to have a new compressor put in because Whirlpool wont back their products.

We bought our washer (Whirlpool Cabrio) from a rent to own company about 2 years ago, and finally got it paid off. About a week ago, the lid started sticking when it was done washing. I went to open it last night to start some laundry, and it BROKE. Now theres a piece stuck in the bottom part of the lock, and the washer wont start. Anyone else have this issue?

I have a pretty small refrigerator since I live in a condo. It has lasted me about 4 years and is still running very well. It is very easy to clean. I dont buy a whole lot of food at one time. The size is big enough to hold what I buy every week. The appearance is decent. Only two people use it every day. I havent had any problems with the refrigerator in the four years I have had it. I get frustrated sometimes when opening up the bottom storage container. If I pull it out too far, it falls to the floor. This happens especially when the container is full of fruits and vegetables. I guess bottom storage container was designed that way for easy removal to be cleaned. I really like the adjustable shelves. I can adjust them perfectly to store food containers and jugs of milk and other drinks. I like the door shelves in the freezer compartment. It is great for small packages of vegetables.

WE had a Kenmore dishwasher and it never got the food off without scrubbing the dishes first. We decided to get a new dishwasher after being very frustrated. We purchased a Whirlpool and noticed a difference instantly. It was quiet, got the dishes completely clean, (no pre-washing like before) and was overall a better fit for our family.

Purchase 2009 Duet Washer & Dryer (WFW9700VW00). Recently have had error codes coming up - F35 for one. Could not get washer to reset. Had to keep unplugging and plugging back in. Service was called and the tech knew right away what was wrong. He ordered and installed an analog pressure switch. While he was working he mentioned that this was a known error and if we had called with this problem a couple years ago Whirlpool would have replaced the washer. Im not looking for a replacement but I feel Whirlpool should cover the part having been a known issue.

I had my Whirlpool Gold refrigerator for two years. I observed water puddling out of the bottom of the freezer about every three days. I called Whirlpool to find out if there was a recall on my problem. There was none although refrigerator repair companies said there should be as Whirlpool has a defective part. That part is the drain for the freezer as it clogs up and does not allow water to drain and then refreezes. When the freezer automatically defrosts, some ice melts and as a result the water comes out of the bottom and puddles on the floor in front of the refrigerator. I recommend that people do not buy Whirlpool refrigerators unless you are willing to pay over $200 to replace the end of the drain line in about two years.

I purchased a new Whirlpool stove in Feb 2020. First off the oven was not calibrated right and Whirlpool wanted us to do all these tests to see what the problem was. Finally, after purchasing an oven thermometer I finally got my ducks in a row and called them back to which they finally sent out a repairman. Now after almost finishing supper last night the whole cooktop stopped working. It is going to take a week to get someone out to fix it. Also, we have to purchase an extended warranty for our Whirlpool refrigerator every year because it always needs something fixed. Our Whirlpool washer has been on the blink for quite some time (no warranty) and cant afford to get it fixed. When talking to someone at Whirlpool it appears they have no compassion. I guess it is because they are just paid employees. My recommendation is to look into other products before purchasing. Do your homework.

I purchased a Whirlpool Microwave on 9/21/10 from Hamilton-Bryan in Wichita Falls, Texas. I had a small fire in my microwave on 9/19/11, due to a faulty mica board. This was replaced by Mr. Bobs in Wichita Falls, TX, under the warranty. Then on 1/9/12, the microwave would not warm anything. I called Mr. Bobs again, and they said the transformer was out. I called Whirlpool, and was told by Yvonne that Whirlpool would replace the part only, with no labor, but Mr. Bobs was closed, and to call back in the morning, so this authorization could be set up with Mr. Bobs. I called back and there was no record of my call with Yvonne. I talked to a supervisor Rachel in Tennessee. She put me on hold for a while and finally said she found Yvonnes note to authorize the part. I explained to each person I talked to that I was dissatisfied with Whirlpool. I believe I have a defective microwave. I would like my money back, or a new microwave. I believe the defective mica board is related to the defective transformer. I am a very dissatisfied customer. I have used Whirlpool most of my adult life. I have used them since the 1970s. I currently have a Whirlpool refrigerator, washer, and dryer. A similar situation like this occurred when I bought a Samsung washer. I was dissatisfied, and Samsung refunded my money, and I bought a Whirlpool washer to replace Samsung. I will not be satisfied with this situation, until the microwave is replaced. Thank you for your concern and attention to this matter.

In all of my 50 years of marriage and buying stoves, I have never had an oven breakdown. I live in Canada - I purchased three appliances, all Whirlpool 2 years ago. I had to have a service call on the fridge three weeks ago - a little rubber nipple was clogged up and water was running into my freezer. Bill $100.00 - two weeks ago, the broil element in my stove would not turn off when the bake cycle heated up. Actually, you did not have to press the fast heat button as the broil came on by itself. I have been waiting almost two weeks for the part - today I was told it would be another week. The part has to come from the US - what ever happened to Whirlpool Canada???? - I am told the bill will be $350.00 and maybe more plus the service call. I do not find this acceptable. What do you do when you have already invested the money in the product. Bring back the old Moffat stoves. I would like to be reimbursed for the money I have put out and will put out.

I initially purchased all new Whirlpool products as part of my new home purchase in a Pulte subdivision, June, 2011. My WP microwave failed to heat in 2012 and the replacement of the Magnetron and Inverter and service was covered under warranty (would have cost me $493.51). Sadly, the microwave again failed to heat in 2014. I was so disgusted with this second failure, I decided to live without a MW until January, 2016 when I paid for my second service call and learned, once again, I needed a replacement Magnetron and Inverter, to the tune of $400. Both servicemen told me the 2011 magnetron/ inverter mechanisms were new technology and did not last long. Again, sadly, when I contacted Whirlpool, they would not admit to their defective product line and indicated they could do nothing since I am out of warranty. It is unconscionable that a corporation is not liable for their defective products.

Extremely disappointed in Whirlpool oven! Built new home and this was recommendation by BAC Appliance. The oven does not self-clean well at all, and my spills are minimal. Deposits between glass doors that cant be removed. Oven is barely cleaner than before I cleaned for full cycle. Oven suddenly shuts off for a short while and then restarts. Steam comes when using lower oven and removes finish on upper oven. I expected Whirlpool to have a quality product. Definitely not! BAC really had no answers for me.

I have a Whirlpool Cabrio washer and dryer combo. Recently, I have learned that the washer has a very common problem with the water pump. I have read amazing amount of complaints about this problem and apparently the company has nothing to say about this. The cost for parts and labor for replacing this pump is about $400.00, almost half the cost of the unit. This is unreal!

Whirlpool Duet 3.9 cu ft High-Efficiency WFW9451XW00 - Hear my first experience with Whirlpool. I purchased a washer machine 30 April 2014. Guess what - machine stop working suddenly on July 30th, just about three months later. I had a lot of guest from overseas. While they visit me, I did not have my washer machine. How embarrassing. It was big mistake to buy Whirlpool. It is all made plastic inside and they uses cheap Chinese material. Anyway, technician came house to check what the problem was... all control system was burned. He ordered almost 10 parts from Whirlpool on 04 August. Whirlpool scheduled delivery for 20 of August. I called them for them to send the parts faster so my guests could wash their clothes. They send them little faster for August 16. After a day, technician was in the house again. I waited about 3 hours for him to fix my machine. He was really nice guy. He put install all new parts. Just in front of me, new parts broke after 5 minute. Whirlpool still did not contact me about their decision. Today is August 26th... I called them 5 time already - Nobody give me useful info. NO Whirlpool, guys - bad service.

Immediately after purchasing an entire kitchen of Gold Series kitchen appliances including the refrigerator with bottom freezer in 2/2013 from Lowes we began having issues with the refrigerator. I am not an engineer and dont profess to be, but even I can figure out that the whole thing is a problem based on a design issue. The top drips water consistently and has from the first, which has been addressed numerous times. Ice maker replaced trying to fix the situation two times. The freezer guides were messed up and off from the beginning, and had to be ordered-waited for, then installed. In total a repair person has been here, an inconvenience on our part - 7 or 8 times and we still dont have a refrigerator that works properly!The last time we had someone look at it, there was a part that had to be ordered from, yes, Mexico and we had to wait a week or so and they told us they could rent us a loaner!!! Are you kidding me?? I should have kept the old 26 yr old fridge in my garage that is still working that was built in America! After buying $8000 in appliances and supposedly a top of the line brand name that in the past has shown integrity to their products... I pay my bill each month, because if I didnt someone would put it on my credit. But who puts it on Whirlpools credit? Who is going to hold them accountable and how many complaints must there be in order for someone in the government to step up and do something to a company that is taking tax dollars from our US and sending it to other countries but selling less quality products to those who do pay the taxes? I am ready to sign a petition! I should have gone with the other brand! Any other brand would have given me a better shot than this of having less of an issue! Terrible experience and certainly NOT GOLD! Shame on YOU Whirlpool!

Had a part come off right after our purchase but was a easy fix to repair. The silverware basket also kept coming off until we looked at it and realized it was on wrong. This dishwasher is much quieter than our last one. It also shows fingerprints. We got this dishwasher in a group purchase during a sale at Lowe’s that included the refrigerator a stove, microwave and this dishwasher.

We bought a new Whirlpool refrigerator about three years ago. Because of space, we had to purchase one with a top freezer and also with no ice maker. First of all we didnt realize it was much deeper than our old Kenmore so it stuck out further into the kitchen space. That was not that big of an issue. At first everything ran great including the top freezer compartment, or so we thought. Then we noticed that when we had ice cream in the freezer and put water in ice cube trays to freeze, the ice cream would get very very soft. This continued to the point that now anytime I put water in there to freeze ice cubes I have to turn up the temperature to keep the ice cream frozen. Once the ice cubes are froze, there is no problem, but they take at least six hours to freeze. Then one day when a young child slammed the refrigerator door closed, the freezer door popped open about an eighth of an inch and then closed again. So, I tried it. Anytime you close the refrigerator door a little too hard the freezer door pops open. I then tried the dollar bill test to check the strength of the seal. The bill pulled right out of the door with very little effort. So, is the problem bad seals, bad design, or bad quality control, or what. How can I be assured that the frozen foods in the freezer are being frozen as solid as they should be. I know they dont freeze solid enough in the freezer door. I will eventually dump this refrigerator and go get another Frigidaire. If we have to get one with a bottom freezer, we will just have to rearrange our kitchen to accommodate it. But, having to turn the temp up and down every day is ridiculous. I have had issues with food close to the walls in all refrigerators slightly freeze, but never had an issue with keeping things cold enough. I will never buy another Whirlpool refrigerator, stove, or anything else for that matter. I have always had good luck with Frigidaire, so I will stick with what I know works.

My wife and I were gifted a brand new washer (model: WTW7300DW0) and dryer set. We were very excited to try them out as we had just moved into our new home and had been without a W/D for about a week. We ran our first couple of loads and discovered that our clothing was, especially dark colors, covered in white stains. We didnt know what it was so, we did a little research and found out it was most likely soap residue. So, we reduced the amount of soap we were using... and it still happened. We tried every setting available on the touch screen... clothes still came out covered in soap. We eventually called Whirlpool and had a technician come check it out. He ran his tests, said everything was fine, and to use only a teaspoon of soap for every full load of laundry. This didnt sound right to me but we tried it out... stains... still... and I noticed our whites were not getting cleaned very well at all. Sweat stains from undergarments were hardly touched during the wash cycle. After several more phone calls to Whirlpool, were having another technician come out. I just want Whirlpool to take this POS off of our hands and exchange it for something that works. A washing machine that actually washes would be nice.

I bought my topload washer 2 years ago along with a dryer. The past month, the washer started sounding like an airplane, ready to take off, whenever the spin cycle was on. Then, it started to not start at all on certain cycles or would start to pump water in and then stop suddenly. I had a repair man in today, and it was not good news. He told me that he sees this a lot, especially with the Whirlpool washers and it is costly. The bearings are shot and will cost close to $500 for parts (alone), not costing the price to have it repaired. So now, I have called Whirlpool. The people there are very friendly and sympathetic. But even though I went as high as the supervisor (the highest authority I could speak to), he told me my washer is not on the recall list! I asked what it took to get it on one. Basically, my complaint was filed and end of story. Well, not quite. The supervisor was kind enough to give me the address for the Head Office for Whirlpool Canada. So people, start writing into this address and bombard them with your frustration: Whirlpool Executive Office, 200-6750 Century Avenue, Mississippi, Ontario L5N 0B7. If you have spoken to Whirlpool, ask for your reference number pertaining to your case and include it in your letter along with your phone number. In the meantime, I will be writing a lengthy letter; and I also went out today and bought another washer! Yes, it was not a Whirlpool, and I will never have another Whirlpool appliance in my home. And I will steer anyone away from this brand name. Good luck to all and start writing!

Lasted a whole two years, no warranty from Whirlpool. No biggie until I read countless complaints that Whirlpool OTR microwaves dont last. When I was young we had a Whirlpool microwave oven that lasted 15 years. Apparently this one (made in China) is the direction Whirlpool has chosen to take, cheaper products for higher profits.

I purchased a new water heater in August 2013. The pilot light started going out in October/November of 2013. After calling the Tech Support phone number, (877) 817-6750, I was advised to clean the burner screen. First this is very difficult to do because the burner screen is underneath the water heater and almost impossible to access. Second the closet the water heater is in did not show any signs of debris that could clog the burner screen. I did as they recommended. Several calls, and several weeks later, they finally authorized a technician to come and service water heater. He performed a cleaning even though he couldnt find anything to clean; and he replaced the control module. The new control module worked through the spring and summer seasons and then I started having issues again in the fall, late October. Started calling the same phone number and was told again to clean the burner screen. I convinced them to send out the technician again. The A and E Factory technician came out and only cleaned the burner screen and left before I had a chance to get home. This happened several times and I called Whirlpool every time. The next A and E technician told me to try changing out the draft vent chimney to a different size, which I did. Problem happened Again! I finally asked for another plumber and they sent me 3 names of their authorized plumbers. I called Phil, Philco Plumbing. He told me that I needed to have more ventilation, so I added more ventilation, even though I later found documentation stating I already had more than what was required by the manufacturer. Again, a week later, started having problems. Call back and asked to have my personal plumber come out. This time the rep told me that I have always been free to choose any plumber I wish (why wasnt I given that option the first 10 times I called?). My plumber came out and replaced the control module and the thermocouple, but wasnt convinced that these were faulty parts, he honestly couldnt figure out why I am having this problem, but it was worth a try. That lasted about 1 week and now I am having the problem again!!Whirlpool will FINALLY authorize a new water heater, but they will not authorize installation for the new water heater. I have already spent money on recommended repairs that have not worked. I have taken 15+ hours off of work to watch plumbers do nothing that has rectified my problems. And now Whirlpool wants me to deal with installing the unit myself, OR pay to have it installed! They say they wont cover installation because I purchased it more than 1 year ago. They seem to be missing the fact that I have had trouble with it the ENTIRE time I have owned it!This Flame lock system is garbage. I found on Consumer Affairs that a few years ago a class-action lawsuit settled, dealing with the same issues. I think it is time for another round! I KNOW that I am not the only one dealing with this problem because the plumbers I had out all had similar complaints from many of their clients. Whirlpool wont fess up to the problem, but the problem is real.

After 48 years of marriage, I had never had a new, matching washer/dryer set. I had had several new washers, but only used dryers. These all were very good units and served me well for years. So I was excited to buy a new, matching set. I have never been soooo dissatisfied with anything in my life. As I have read from other reviews, the washer uses very little water, sometimes hardly enough to get the load of clothes wet, very little soap, and in my opinion, does hardly any agitating. I dont feel my clothes have ever appeared clean. The only ones that look clean were the ones that started out looking clean when I put them in. I know this is all an ecology thing, water saving, government guidelines, etc., but please give me my old washer back. It did enough agitation to get clothes clean. And the dryer usually will not get the jeans dry on the first attempt. I have tried various settings, and they just dont get dry. In short, I HATE THIS WASHER/DRYER SET. I have heard others talk about the same thing. No one likes them, but we are stuck with them. Would like to have the government step in and see how dissatisfied everyone is with them and force Whirlpool to give us our money back, trash these units, and buy something that actually works. PLEASE, IF YOU ARE LOOKING FOR WASHERS AND DRYERS, DONT BUY THESE. I believe they are called Cabrio.

Whirlpool side by side refrigerator/freezer Model #GSF26C5EXB. LESS than five years old and the ice maker is not working! Bought at Lowes. Great service. Out of warranty now. Lowes sent a repairman and it has to be replaced. I called Whirlpool and they said sorry. THATS IT? Ice makers dont ever last five years now? Unreal!

I purchased the front load washer 4 years ago and the board went bad in 2 years. It costs more to fix it than the washer is worth. Stupidly, I purchased the top loading Cabrio and it has gone downhill from there. Has always sounded like a jet taking off in the spin cycle. Then 18 months into the purchase, it started with grinding noises and load balance issues on the spin cycle. Seems like they have a lot of issues with these Cabrios. Spent a lot of money for nothing. I will never buy a Whirlpool again!!!

We have had this washer for a little over three years. We are a family of 2 so it gets only light use. The agitator stopped working and the repair was going to be $370! The repair person suggested we contact the manufacturer but they refused to even pay a portion of the repair. Goodbye Whirlpool! And yes, it left white streaks on our clothes as well.

Whirlpool gold series gas oven with Aqua Lift. Very unhappy with this oven. Cons: Aqua Lift technology doesnt work AT ALL (manual cleaning required); stove top hard to clean; 2 front gas burners are super burners which is fine for boiling water, but too hot for regular cooking. Would be better to have one super burner in the middle or back but two up front is way too hot for regular cooking, even on lowest setting; oven cuts out while cooking -- unexplainable how this happens but you really have to watch the oven while cooking to make sure its still on. Pros: large oven so you can cook ginormous turkeys or prime ribs.

Me and my wife bought a Whirlpool top load washer June 2011. Two months later the motor locked up and they repaired it; then the transmission started whining the next month. It was repaired. Now a bearing is going out all in the first seven months of ownership and they will not exchange washers, they just want to keep fixing this one until the warranty runs out. Whirlpool washers are a piece of junk and I will tell everybody not to buy anything Whirlpool.

2 years ago, I bought my fridge from Home Depot and the delivery people did not leave a manual. I call to see if they could provide me one because I don’t know how to operate some parts of it. They told me they don’t send manuals anymore. She referred me to a website to download it from an online site. I told her I don’t have a computer. It would be easier if they can send me something in writing and this lady told me that they don’t. She asked- “and you come to us after two years? What have you been doing in the meantime? “And from then on she was very rude and she transferred me to another lady that was worse! I do not need this! And the fridge is very noisy. I’ll never buy Whirlpool again.

The Cabriolet washer and dryer act funny. I really believe its because they are digital... Didnt they realize that at some point moisture would affect controls? Idiots! And if a cycle is stuck, you cant manually move it forward or backward... you know, how the standard machine works... yeah the one with knobs!! Sometimes computers are not necessary and this is one of them... too damn advanced!! Id rather have a good old American washer. Not worth it. I get a better wash at the laundromat. # pissed.

Whirlpool Cabrio Washer WTW5000DW - I have owned at least two other washers in my life, and I just recently bought a new washer/dryer set at HHgregg. Was told they are doing away with agitator washing machines in the very near future so this is my first experience with a top load agitator-less washer. This thing is AWFUL!! First of all it took a minute to get used to the weird popping, grinding noises it makes while going through the cycle (which I might add seems to take FOREVER). The other thing I hate about it is there is no way to add the fabric softener at the start of the wash in this model unless you have a downy ball of which I have yet to find at my local dollar store or even the KROGER??? So I run back and forth trying to catch the rinse cycle to STOP the machine (wait I might add) and then add the FS manually.BUT THE ABSOLUTE WORSE THING is - my clothes come out with SPOTS that look like lint all over them, and they wont wipe off unless you have a wet rag to do it with!! AND YES - I have cleaned this washer TWICE already since January with the very expensive AFFRESH. I wear scrubs and they are solid colors, so it really shows up and I have to wipe off every pair EVERY day before I put them on then roll a lint brush down them. WHO HAS TIME FOR THIS??? This is on my SOLID colors which is easy to see, I can only imagine the GUNK that is on the rest of my laundry!!! I dont feel like my laundry is getting clean at all!! I am divorced and money is tight - I paid around $500 buck for this piece of crap. I am already seriously thinking of getting me another one - the OLD tried and true kind with an AGITATOR! And yes I am ANGRY. Can you tell??

When I purchased my Whirlpool Cabrio washer and dry, I was told by the sales associate that this was the top of the line. I paid a higher price for what I thought was quality only to find out that this washing machine (WTW6600SW2) Serial number CU2973872 is in fact poor quality, made of components that are cheap, unreliable and made to last only as long as the initial warranty. Prior to buying Whirlpool, I owned Kenmore and had a washer and dry that raised four kids, now I own a Top of the line Cabrio that cant wash the clothes of two adults. I think it is funny that two days after the washer started sounding like a jet plane taking off during the spin cycle, I received your sign up for an extended warranty letter. Then I take the washer apart to locate the trouble and find it is a single bearing on the top of the drive shaft, but can I buy the bearing and replace it? No, I have to buy the entire outer tub and drive shaft. So a $10.00 bearing will now cost me $200.00. I am sure that helps your profit margins considering all you have to do is a search for Cabrio problems to find 350,000 hits, or to ask a professional technician and receive the reply that they are replacing 2-3 of these tub and drive shafts per week. I would recommend that Whirlpool tell its shareholders that you have compromised customer satisfaction to line their pockets with profits. If that was your intent then you have succeeded, however you need to also tell them to sell their shares now as you will have no return customers. Most corporations have core values that deal with safety first and then always followed by quality. I can say with confidence that your quality can be nowhere near the top five with this many problems with your top of the line product.

First three months, the main water gasket broke. Thank you for lots of water all over the kitchen. I pulled the washer out to inspect the cause, wanted to see if it was house plumbing or dishwasher. The hose was hanging off the bottom of the machine. During the 45-minute call, I got in my car and drove to plumbing supply and applied a new hose clamp. The next day, a free service call, the repairman said it was the second one this week, Thats just what I would have done, but would not put the machine back. (void the warranty, finish work, etc...not sure how he would have serviced the machine if I did not pull it out for him). A few months later the wheels on the top shelves give way/fall off the rack, so we have those replaced. As soon as one is replaced, the other side falls off... Now, approximately 14 months into installation, the dishwasher does not work. The control panel is flashing and will not start. What a runaround with KitchenAid. We were told there was a recall on the hose clamp (we never got one). We cannot have the control panel worked on until the hose clamp is certified... That will take a week. Then we can call back... What a hassle. We bought this expensive product on good reviews. We are most disappointed. There is very little concern for making the product good. Its incredible that so much can go wrong in such a short time of limited use. Once/day... The hose clamp is just poor engineering. The rest is terrible quality and support

It was in the house when we bought. I find location of knobs stove top, are too easily turned on. It is ok for now, but I am not a big fan of this stove. Builders buy a base grade appliances for profit in their spec homes to keep them. I will replace this one.

My dishwasher is more than five years old. The water jets need to cleaned regularly. A little noisy but I can chalk that up to age. I use 1 or two packs of detergent. Sometimes, if I don’t pre-wash, I need to run through the cycle.

I have had this refrigerator for 23 months. The ice maker has been a continual problem. It overfills and water runs onto my hardwood floor. After four service calls for the ice maker, the defroster heater caught on fire and melted the interior wall of the freezer. Not sure if we fixed the ice maker since we had the fire four days after the last service call. My service rep declared the refrigerator unrepairable. Fortunately I had purchased an extended warranty and they refunded 85% of the purchase price after 2 years of use. Besides the ice maker problem and the fire, I also had trouble with food freezing in the refrigerator compartment. I dont recommend this model, but my repairman says that Whirlpool is as good as it gets.

Whirlpool Washer W10740628A - So disappointed! I have made adjustments for a year trying to get clean clothes from this machine. Compared to my previous machine which wore out, I now use more water because only deep water wash provides enough water; I always choose double rinse because if the machine does not clean, I do not trust it to rinse effectively either. I use more Tide than previously per wash; I use more Clorox than previously per wash. Everything from tea towels to heavily soiled jeans show stains and soils after washing. Instructions say not to spread the item in the washer but allow it to stack on itself, so twisted and tangled wet clothes are the result. I try to soak and scrub all visible dirt before I start the machine now; additionally, I use a mop or plunger or my hands to thoroughly immerse the clothes in the washer, somewhat like my mother did in 1950s. What on earth is this about and what is the buyer supposed to do???

I bought a Whirlpool refrigerator (dbl dr) from Home Depot and received it on August 4th. When I went to clean it I found that blood had spilled from a roast and had accumulated all around the inside of the plastic shelf seal. It was impossible to clean. Water just ran inside the seal and diluted the blood. Then, it leaked all over my kitchen. I had a serviceman here for another problem, sent by Whirlpool. He said hed try to get them to replace the shelf. Never heard from him again. I called Whirlpool today. Was told I could buy another shelf. Otherwise, they didnt care. Said it wasnt a functional problem. This is a definite health hazard. Whirlpool used to be wonderful. What happened? I have a dryer, washer, and water tank about to need replacing. Whirlpool wont see a dime from me. (Home Depot, either.) This has become a very bad company. Ive contacted the NY Dist. Attys office. Meanwhile, I have a fridge with a major shelf missing for the holidays and for the foreseeable future.

What a piece of expensive junk! Do not buy it, does not clean clothes well, lid broke, lock broke, now it just wont start. Parts are super expensive. Next one I buy will be a basic washer, forget all the bells and whistles!!

We have a built in double oven and we had some early problems with the thermostat. And from time to time the clock resets to 12:00 oclock when there is no other power outage indications. Its also been a challenge understanding the instructions sometimes.

I took the Sears salesmans suggestion and bought a high-end quiet dishwasher. It worked wonderfully until it sprung a major leak. Computer told me the phone # to call. It took a week for the Sears repairman to come out and $79 fee to just look at it. He said the fitting between the sump and the pump came off and flooded water over the electric motor. Electric motor is shot! Cost to repair is over $400 and a 3-week wait!!! When and if a new motor is installed, only then do we know if the computer is also fried. This was a high-end dishwasher. Factory warranty just ran out. Repairman said this is a common problem with this model. DO NOT BUY THIS MODEL.

Sometimes, it doesnt get the dishes clean. I am not sure if it is the dishwasher or the detergent. I recently switched to Finish Quantum Max and it seems to be doing better. I always use the pots and pans cycle. Lots of features, most never used. For instance, china crystal, quick wash, rinse only. The size is ample but the interior design could be better. Solid black, looks good, Model GU1500XTL82.

Whirlpool Washing Cabrio machine model WTW5500XW0 - I purchased this machine five years ago. After about a year I started having problems where the clothes were not coming out clean. I contacted Whirlpool and was referred for a repair. The repair man told me these newer machines need the Affresh product to clean out the machine so this doesnt happen. I bought the Affresh product and there is still a problem. Every load of wash has to be put back in for another rinse cycle, sometimes two rinse cycles. Its ironic because the cover of the booklet for the machine says low-water washer which was the selling point to buying this machine. Instead of using less water, Im using DOUBLE the water.

We purchased a higher end cabrio model only 3 years ago. Last year, on about every 5th cycle, the load would not spin at the end. Id have to remove all the wet clothes, set it to drain and spin, start it and wait for it to hopefully kick in. When I do it right, it kicks into the spin mode. I had to quickly press start/stop to unlock the hatch and reload the soaking wet clothes and wait for it to spin properly. Yesterday the same thing happened again. This time, it did not kick in. I ended up flipping the washer over and taking a look underneath. I discovered that the motor was seized. It had lost all its lubricating oil and smoked the belt. Now, my 3 year old washer is sitting in the driveway awaiting a trip to the dump since I got fed up and went out and purchased a new Samsung top loader. I emailed and called whirlpool with no luck. Not impressed. When I went out to buy a washer today the first thing I told the salesman was to stick anything with the name whirlpool out in the trash bin out back.

I bought this machine in September of 2014. Six months later I HATE IT!! It does NOT get the clothes clean and dont even try to bleach white towels or socks, it doesnt pump the correct amount of hot water and things come out just as dirty as when they went in. It tangles everything together and frequently stops working because it unbalances the load with its lack of water. Ive always been proud of how my familys laundry looked and now Im just embarrassed. Im considering donating this to a human society for dog towels. Stay away from this washer, its horrible. Im going to the laundromat and shopping for a new machine ASAP!

I purchased this washer (Whirlpool Cabrio Model #WTW8000DW) 10-25-17 from Best Buy & now it has no power to the panel at all. The power to the outlet is fine which I can plug a hair dryer in & the hair dryer works. Tried all the reset buttons & options with nothing on the panel working as well as unplugging. Still nothing. It is barely 4 months old & I am very dissatisfied for the amount of money I paid for a high efficiency top loading washer.

The Whirlpool Cabrio washing machine it’s the best washing machine I’ve owned. Water temperatures are right on, has an express wash 38 mins for lightly soiled clothes, plus the normal, delicate, heavy, bulky, 2nd rinse, if you need it. My wife loves it because it’s very Gentle on her personal items. Energy saver AND BEST OF ALL, IT REALLY CLEANS THE CLOTHES.

My Whirlpool microwave broke. Im not sure how or why so today I purchased another 2 actually. Both were too big. The model I purchased is discontinued. I had to remove part of my Marble Backsplash - the turntable is tiny however mic is huge. Work on making microwave for smaller areas. Stick to get or Samsung for a nice size microwave not a Mongo mega oven above your oven.

We purchased a brand new Whirlpool fridge & electric range. Tried the oven on 3/22/14. Turned it on at 350 for 30 minutes. Waited for the new smell to go away. Then turned the temp up to 375. My husband put a frozen lasagna dinner in. 25 minutes later the inside oven door window exploded into the oven and the dinner. Found out the outside window usually explodes. We were lucky. The dealer we bought it from let us exchange it right away. Filed a report with the CSPC and am trying to find out how to file a complaint with Whirlpool.

Does not get clothes clean. Period!! Takes just over 1hr. Noisy, lasted 3 1/2 years, transmission broke, take the warranty with a washer/dryer. Whirlpool was the top of the line, front loaders give less trouble, agitators clean better, go for the cheaper versions, our loaner Whirlpool, WTW4850H or WTW4950H washes quicker and cleaner than the Cabrio Energy Star.

Refrigerator model # wrs325fdam04 - Refrigerator shelves and drawers are made of flimsy material. Water dispensed is never cold enough - almost at room temperature. Every six months one has to change the water filter cartridge, Filter1 w10295370a, which costs at least $49.99. Cheaper versions that cost 50-60% less, I have purchased and returned 2 different brands, are not compatible with this refrigerator. I do not recommend this refrigerator.

Fridge residue - ED5FVGXWS07: Well, I gave it a long time and this is how they make Whirlpool refrigerators! I had a GE for 20 years and was so looking forward to this new one. What idiot designs a fridge that leaves water stains like this? And, the water falls onto the floor when refilling a water bottle plus there is no catch for the water. Argh! I really dont want to live with this for 20 years! Their resolution was to get a water softener; really?! It has a filter built in. They refused to replace the fridge.

Purchased a new home in Florida. Builder used Whirlpool appliances. For a year opening the refrigerator door has caused breakers to trip off. No matter what builder and Whirlpool do, breakers keep tripping. Cannot sell house with this issue. If someone was counting on electricity for a medical device they could die when refrigerator causes power to go out. Unfortunately, it looks like legal action is the only thing that will save our investment in the house.

Whirlpool Gold Refrigerator Control Panel Failure - This French door refrigerator with freezer on the bottom was purchased new in November 2008. This August, the refrigerator stopped cooling. I contacted a reputable local appliance company who diagnosed the motherboard was not functioning on the appliance. They ordered a new one from Whirlpool and replaced it. Forty-five days later, the replacement motherboard stopped functioning. When I contacted Whirlpool directly to inform them what was happening, they continually stated that the appliance company was not part of Whirlpools approved appliance technicians, and offered no assistance in guaranteeing the problem will not continue to happen. I am extremely disappointed with Whirlpools customer service and unwillingness to guarantee their products. A 3 year old refrigerator should not stop working.

I was very excited when Melanie from Whirlpool customer service called me back about my complaint. WHAT A JOKE! I thought she was going to offer at least a repair considering by her own admission this same problem with my control panel of my double oven happened just last May (dead for the third time). Instead she offered me 15 to 30% off a new product if I bought it in the next 30 days! ARE YOU KIDDING ME?The first time the control panel died was when I used the self-cleaning feature. The oven never turned on again. Cost me hundreds. I have been afraid to use the self-clean feature ever since. The second time was in May and is no longer under warranty? Again it cost me hundreds!! Now I am supposed to be happy with 15% off another one of your products? Why would I have any faith in any of your products? I have since found out that Whirlpool has had so many problems with this model - they have quit making it. The repair man says Whirlpool cant make the control panels fast enough to keep up with all the repairs but this is still not under warranty - how about a recall? Do you guys stand by your products at all?

When I moved into my current home, this dishwasher(Whirlpool Quiet Partner 1) was already installed. It had never been used until I moved in. After two years of 2-3 times a week use, I have major problems. It will not complete a wash cycle, regardless of what settings I use. It runs long enough for the soap dispenser to release the Finish tablets which dissolve, but then the dishwasher stops running. The dishes are not clean, and neither is the interior of the dishwasher. It also appears to be leaking when it runs. I cannot afford to replace it, so either I will repair it myself or use it to store pots and pans.This is not my first disappointment with a Whirlpool product. A Kenmore refrigerator made by Whirlpool lasted 7 years before the compressor failed. Apparently, the self-cleaning coils werent and caused the compressor to fail. The refrigerator I have where I now live is a Whirlpool over 20 years old and runs perfectly. Apparently Whirlpool quality has deteriorated badly in the last two decades. I will never buy another Whirlpool kitchen appliance because of the dishwasher and new refrigerator experiences. When I searched the Internet for fixes for both appliances, I found many other owners having the same problems I have had.

Purchased the Cabrio top loading washer and dryer. Huge mistake. The clothes come out of the washer a tangled wrinkle mess. Have tried different cycles and water levels to no avail. Dark clothes have detergent streaks and lint. The dryer has a steam refresh cycle which Ive used to try and remove some of the wrinkles caused to no avail. Clothes come out with water spots. Ive only owned this dual for about 6 months. Take my advice and DO NOT PURCHASE!!!

We purchased the Cabrio Agi top loading washing machine in 2011 (3 years ago). After 2 years it started leaking from the plastic drum (Bearings?). Luckily we have it in the basement on concrete floor, so there was no damage, just frustration. This was poor purchase on our part. We should have searched for more reviews. The wash time is ridiculous; it is too long, an average of 50 minutes per load. I dont know about how clean the clothes were, I guess they were OK. I didnt notice a smell, or them looking dingy. The Cabrio is a piece of junk if the bearings went out after 2 years?? We just purchased a heavy duty Speed Queen, top loading, agitator washer. My wife loves this, its like the old Maytag we had. They told us they wont be selling these washers after next year. Buy them while you can. The Cabrio is headed to scrap yard.

We have been very happy with our appliances that now over 11 years old and doing well. We love our gas range top. They gave greater and new models so we love Whirlpool and GE. We always get great deals at Home Depot.

I purchased a Cabrio washer and dryer in 2011 and sold it in 2012 for half the price. I was tired of my clothes not being cleaned. My husband and I work in an office environment so our clothes do not get real dirty. On the other hand, we do work around the house and garden. When I put black pants in the washer, then take them out, they look clean because the mud is still wet. When I take them out of the dryer, it is dry mud. I called the company and they said get someone in our area to come in and see if anything is wrong. Yep, they came in, charged me $150 and said that nothing is wrong; they cannot find one thing wrong. I used the washer for about another 6 months and thought, This is crazy! My towels, bedding, nothing is clean. I then sold it for half price and I am now using a totally different brand. I will never purchase a Whirlpool again!

I had my range installed in January of 2015. The very first week, using a new Farberware non-stick skillet, the cooking surface became permanently scratched. Could not polish it out, and polishing - it must be done every time you cook on it! In early September the cooling fan for the electrical panel went out. Also, the convection oven would not maintain heat. Had the cooling fan replaced last week. Its out again, along with the convection oven not maintaining a regulated temperature. Also, 3 months ago, my grandson put a ceramic casserole on the stove top. After he took it out of the oven, it permanently scratched the paint off the control panel. Im very disappointed in the fragility (painted plastic surrounds top of control panel) and unreliability of this product, a total lemon.

This is a Whirlpool dishwasher that has been functioning for 25 years! Much better than any of my 4 newer appliances. It has never had a problem. It is easy to load and unload. The dishes are always clean. Dread getting a new one.

Ive owned my Whirlpool appliances for almost a year. So far Ive had 4 maintenance calls for my dishwasher to be fixed (over and over) and once for my refrigerator. Yes, its currently under warranty, but Im afraid to keep it without an extended warranty due to all the issues Ive had with them. So, now Im going to be spending hundreds on an extended warranty. I will never buy another Whirlpool.

I am pleased with the steel tub, the ability to do an extra rinse and spin and especially the choices of water level that it determines by the size of the load. Its ability save water use. I would repurchase the top loader again. My clothes come out looking wonderful especially the whites and I do not use bleach. It does not get the mold or mildew odor that my last machine would get due to the rubber or plastic made tub. I love it.

We purchased all our appliances from Flecks - there were to be rebates. Also never received them. We have had our oven for 2 years - when I set the oven on 350 it will go up to 400 degrees & the temperature on the front of the stove is 350 then it will drop down to as low as 250 & the temperature will still say its still 350. I called the company - did will do nothing. Will cost me as much to fix it as to get a new one. This a Whirlpool oven.

Your Whirlpool French Door model # WRF993F1FM is a piece of junk... Had the fridge less than a year and had to have repairman come and fix it twice already... Would never buy Whirlpool Product again. Builds up ice in the refrigerator and then loses of most of the food in it. Leaks the water right onto the kitchen floor...really pitiful to spend more than 2000 dollars for a fridge that is a piece of junk.

I recently purchased a Whirlpool refrigerator, model number WRT351SFYB00. Several months later, I noticed a small amount of water on my kitchen floor. I moved the refrigerator and found the hard wood floor under it had been completely ruined, so the leak had obviously been going on for a long time. Possibly since day one. I called a repair man. He identified the leak was coming from a cracked drip tray which was not uncommon. However, much to his surprise, due to the design of this model, he was unable to remove and replace the tray. He explained there was a metal panel bolted in place that was preventing him from replacing it. He said this panel was also bolted to the compressor. Therefore, the best he could do was caulk whatever cracks he found in the existing tray and hope for the best. It goes without saying he could not guarantee his work like he normally does.I noticed this same complaint on a user forum website on Appliancepartspros.com, so this refrigerator obviously has a significant design flaw. My repairman said if it was his refrigerator, hed get rid of it, and also indicated that after seeing this, hed never again recommend Whirlpool to anyone. All I know is that Whirlpool is permanently off of my list now as well.

I am very impressed with Whirlpool. After seeing my review, they contacted me and offered to send the parts to fix the problem with the LED lights. They sent a Whirlpool authorized repairman to my home with the understanding that since the refrigerator is out of warranty, I would have to pay him. Whirlpool also asked me to return the faulty part so they can research the problem. We are once again happy owners of Whirlpool products. Thank you Whirlpool!

I bought a new house in Hattiesburg with a Whirlpool dishwasher that is loud. It runs normally but when you open it the dishes are just as dirty as when you put them in if not worse since it will spray any residue from the bottom to the top shelf. I have taken it out and inspected all lines and such but can find nothing wrong to the naked eye. Thus I’ve got dirty dishes that must soak since the drying cycle retakes grime back on and then be rewashed.

This piece of junk just broke down not even one year after the purchase. Every singe Whirlpool washing machine has broken one way or another. This one will set the wash time for 57 minutes, and exactly 24 minutes left in the cycler, you hear this big crash and then everything stops. Another dumb thing about this piece of crap is that when the problem happens, the POS keeps the lid locked so that you cant tell what the problem is. What morons would put a lock on the lid? Its not like someones going to take a jacuzzi bath!Restarted the POS again, and exactly 24 minutes left on the wash cycle, there was another crash. Both times, exactly 24 minutes. NEVER BUY FROM WHIRLPOOL!

My contractor purchased a Whirlpool NU50T61-403 water heater at Lowes. After several months the gas valve stopped working. Whirlpool sent a replacement gas valve which stopped working after a month. When I complained they offered to send another replacement, which I declined. They also offered to have it repaired by 2 firms which were very poorly rated on Yelp. Whirlpool stubbornly refused any other remedy. As I needed to resolve this right away because tenants were depending on having hot water. I replaced it with another hot water heater. In summary I wasted $570 for 9 months of use.

Last year, our clothes started coming out too wrinkled. And until recently, its making a loud noise like an airplane. I called Whirlpool, and the only help they can give me is finding a company that would do service and would charge a lot.

I bought a Whirlpool Dryer after reading an excellent review in Consumer Reports, despite it costing more than I wanted to spend. The first thing I noticed was a thump, thump, thump with every rotation of the drum. Then I realized that it took twice as long to dry my laundry as my 45 yr. old GE dryer, which only needed a belt, but which wasnt available anymore. I was disappointed in the Whirlpools performance, but that was only the beginning. One night when the dryer was less than 3 months old, I was in bed for the night and I heard the familiar thump of the dryer running. I went downstairs and could not stop it as it did not respond to anything on the digital control panel. I finally unplugged it. I called Whirlpool and they sent a new control panel, but I had to pay the service man.Not too long after that, the dryer heated up, but the drum would not turn. The serviceman said that it had come off track and he reset it. Shortly after, the door would not stay closed as the clamp that held it shut had fallen inside when I pushed the door closed. I replaced that. Then the drum continued to come disengaged because it was out-of-round. But, of course, the dryer was out of the 90 day warranty period too and a drum replacement would have cost more than the piece of junk was worth. So, I had it put back on for what I told myself would be the last time. Well, it was the last because the control panel went bonkers again and would go on by itself and only ran on one cycle if I plugged it in and unplugged it when it was done. I finally gave up and bought an inexpensive analog GE dryer which I never had any trouble with and dried the clothes in less time with less noise.

Purchased Feb 2013 - worked okay until one month ago. Now stalls in the drain and spin cycle. The rotation of the drum sounds awful, makes a loud grinding noise. I tried doing the diagnostic reset of holding the Temp button in for 3 sec, release, 3 sec more but that didnt work. Also, I have noticed clothes are DRY after the Wash cycle! Managed to interrupt the wash and unlock the lid and was very disappointed. This is not a good quality piece of equipment. This seems to be a very common problem. How unfortunate.

After 7 attempts to fix my 6-year-old Whirlpool Front Load Washer (original price $991.00) I had to trash it. Then I stupidly bought another Whirlpool Front Loader (WFW75HEFW) Feb 2017. It has not worked properly since day 1. The clothes come out dripping wet. At first I thought I was doing something wrong. I tried every cycle, limited amount of clothing and ran additional spin cycles to no avail. Finally I gave up and called for service.Whirlpool is very much aware that a number of their machines came off the line with defective spin bearings but they wont admit to it. Instead I am expected to have it repaired! It involves the entire inside of the machine being rebuilt. Its a 2 man job that will take 3-4 hours.This is totally unacceptable and it is obvious Whirlpool does not make a quality product nor do they value customer satisfaction. DO NOT UNDER ANY CIRCUMSTANCES PURCHASE A WHIRLPOOL WASHER. They are difficult to work with and I for one will never purchase or recommend any of their products. I purchased this washer from Home Depot and now my only hope is that they will honor my intention of purchasing a non-defective product. If not, I guess Im in for another miserable experience with a Whirlpool product.

I bought the Whirlpool Cabrio top loader set in 2006. Honeymoon was over after the first year and I had to change the dryer element then the washer with the F51 code six months later. Last year, I had to replace the heating element again! For the last six months, I have been dealing with the dreaded UL on the washer. I cant afford to pay a technician $100 to come out and tell me whats wrong let alone what they will charge to repair a problem that, from the looks of this message board, will never be fixed. I have no choice but to get it fixed in order to sell the ** machine. I paid $1400 for this brand new set and have already invested $500 in repairs. How is this possible? I had a 20-year-old machine prior to this and never had an issue. There are lemon laws for cars, why arent there any for appliances over a certain amount? How in this day and age can a company be allowed to sell such garbage? I will never, ever buy another Whirlpool appliance as long as I live. Any other brand can have my money any day.

We purchased our oven new in a package deal with the rest of our kitchen appliances four years ago. The bottom heating element in the oven has already stopped working. Every oven I have seen in my life has lasted a minimum of 15 years, and most 20. All I can say is DO NOT BUY WHIRLPOOL APPLIANCES! In the past 4 years, weve had the repair technician work on the Whirlpool refrigerator (once), dishwasher (3 times), and microwave (3 times). Now, the stove isnt working correctly, making this a total of 8 home visits by the Whirlpool repairman. Whirlpool is manufacturing trash for the landfill now, not quality lasting appliances.

Whirlpool gas range convection oven - I have only had this range for 2 weeks. Manual is sketchy to say the least. Purchased from LOWES - salesman were not well-informed. I have had to do a chat to find out information. Range looks great but performs poorly. Takes a while to heat anything even on high and on large burners. Grates are too heavy. I am sorry I did not see the editor review before I purchased. I have not used the convection so I cannot speak to this but my choices were limited when I purchased and I did not want a convection oven and other ranges would not purposeful for my use.

I purchased a whirlpool gold series microwave model #WMH76718AS one and a half years ago, paid $500.00 for it. It stopped heating. Everything else works on it so it looks like I paid $500.00 for a digital clock and a fancy bread box! I went online and read complaint after complaint that the same thing happened to other people. It appears that the magnetron is faulty. I called Whirlpool and asked their service rep how she would feel if she bought a microwave and after 1 1/2 years it wasnt working. She told me that it was man made and that I should EXPECT things to go wrong. She did offer to pay for parts... which did surprise me. But I have to pay for a $45.00 service call and all labor that it costs to fix it. I called the number she gave me and got a answering machine.... still waiting for them to call me back. I most likely will just throw this Whirlpool piece of junk in the garbage where it belongs. I dont want to spend hundreds of dollars to repair a lemon. I feel that Whirlpool knows there is a problem with their product... that is why they offer to pay for parts. But why should their mistake cost their customers money on top of all the inconvenience. Whirlpool does not back their products or care about their customers after they get your money. I will Never buy a whirlpool product again and that includes anything from their sister companies Maytag, Kitchenaid, Jenn-air, Amana and there are many more. So before you buy anything make sure you check to see who you are really buying it from!

I bought a counter-depth French door refrigerator for our new build. I had to wait 6 months for delivery since it was on backorder. When it arrived a door was bent. Lowes replaced it with a door that had a leaky ice maker. Ice and puddles of water intermittently appear on our new wood floor. Whirlpools technician told us WE would be charged if they couldnt find the problem. Whirlpool rep confirmed. Also the manufacturer warranty began at purchase date instead of delivery date.

Microwave didnt even last 2 years. I bought all new Whirlpool Appliances less than 2 years ago & they were not cheap! The microwave wont work until the light comes on inside. Well for some reason now it takes almost 10 minutes for the light to come on & I have to leave the door open until then. Now today I cant shut it because the light wont shut off & if I try to shut it the fans runs constantly. So frustrating as they dont stand behind any of their products! I will never ever purchase anything Whirlpool again.

This is my second Maytag French door refrigerator. 1st died after 5years. Bought the same again but bought an extended warranty. After 3 years, a month of service calls I still do not have a running refrigerator. Had to rent one from rent a center while Whirlpool sends more repairman. Try calling their customer service is where they got their name. They give you such a runaround they create a whirlpool. Product is junk.

I had owned another Whirlpool Washer before, which died. I purchased this one. It was noisy and unreliable. Whereas the previous one lasted for 10 years, this one stopped working in less than 6. I went out and replaced it with a GE instead.

If you are searching for a top freezer refrigerator that works and keeps the food cold, do not buy this brand. I recently ordered a brand new refrigerator from Home Depot, the Whirlpool brand. It was set to standard factory settings, and I let it sit plugged in for 24 hours as required. The fridge was remaining in between 45 to 50°F, and I let it run for another 24 hours after filing a complaint and talking to the people at Whirlpool. The fridge still cannot get beneath 40°F, though the freezer seems to be okay. I spent almost $1000 on the refrigerator, and I’m very disappointed in the quality that this supposedly good brand produces. I went on Facebook marketplace, found an old 1995 Kenmore and bought it for $50. It works so much better than this brand new, fancy looking refrigerator, because back decades ago is when they actually took the time to make quality products, and didn’t make the crap that they do now that breaks down instantly or after only a few years. Unfortunately, and my researching has confirmed this, appliance manufacturers today create bad quality products that break down shortly in order that you will have to purchase more of their products after only a few years. Refrigerators used to last decades, now you’d be lucky if they lasted maybe 8 to 10 years. Trust me on this, don’t waste your time on this brand. A refrigerator should have no problem on factory settings getting at or below 40°F within 24 hours. DON’T BUY THIS JUNK!

Ive had the WDF510PAY dishwasher for 3 years and the circulation pump broke. To be more specific the impeller inside the circulation pump warped and then basically got lodged because it became oblong and then it wouldnt pump water to the spray arms etc. I bought a new pump because the warranty only last a year. The pump cost around 90 bucks. After not even 1 full year this factory replacement pump failed again. I reviewed other Whirlpool dishwashers more expensive and I found they all have this same junky circulation pump. Im not sure of a better dishwasher but I would never recommend a Whirlpool dishwasher again. They also use the same circulation pump in Maytag and many other brands. Whirlpool or whoever designed and sold this pump to Whirlpool should be tracked down and beaten. Simple products like dishwashers should last more than 3 years. The technology is nothing new. A product should last 10 years at least.

Water saver does not provide enough water to wet the clothes. Even deep wash cycle does not provide enough water. This is right from the start. We should have returned it the next day rather than trying to learn how to use it wasting time so it could never be returned. I rated them as 1 star because there was nothing less I could have given them. DO NOT BUY ANY WHIRLPOOL PRODUCTS.

Bought Whirlpool Gold 21.9 bottom freezer (stainless) Jan. 2013. When it was 19 mo. old I noticed the freezer door was pitting. I have the Lowes protection plan. Not their problem, door is a accessory not a part. Whirlpool said no quality issues with the material. Very disappointed Whirlpool did not stand behind a product they sell. From past posts I am glad we did not hook up the ice maker.

I purchased a 30 gallon gas hot water heater from Lowes in 2013. Within the first 3 months, it went out. I contacted whirlpool who troubleshot the heater 4 different times. Final contact was in early 2014, I requested a tech to look at the heater. Was informed it is now over a year old, it would be at my cost. Replacement parts $30. Shipping the water heater is great if you like cold showers. After a little searching, I find they know this water heater is junk as does Lowes but dont care.

We bought this dishwasher only 18 months ago and its not worth the money we paid. We have had cheaper models that cleaned way better and didnt need as much maintenance as this one. We already had to spend another $410.00 in having the motor replaced in it!! When calling Whirlpool it only has a 1-year warranty and to have a technician come out just to look at it is $150.00. It is so hard to see in the part where you put the jet dry it doesnt tell you when its full or empty and no matter what it always leaves the dishes wet after. Our other dishwasher that was a way cheaper model always cleaned our dishes and never left any food on the dishes unlike this model and we even rinse the dishes beforehand! Look for another dishwasher to save yourself money in the long run!

Ive had nothing but problems with the Whirlpool Cabrio washing machine and dryer. The motherboard has been replaced three times, once on the dryer and twice on the washing machine. The inside of the washing machine is going to fall apart because of the rust at the bleach holder. I saw some of the complaints. Is there any way we (consumers) can sue Whirlpool for selling defective units? We are from all across America and there is no way we should all have the same complaint. The stores that are selling us these items should be held accountable. Also the only thing Im getting from them is, Theres nothing we can do. PLEASE DO NOT BUT WHIRLPOOL WASHERS AND DRYERS!!!!

I bought a top of the line Whirlpool front load washing machine (WFW97HEDW0) and drier with my new construction house. After a few months the washing machine began making a loud, banging noise during the spin cycle. Then about a month before the 1 year was up the unit broke and dumped all the water in the drum into the catch pan it was installed on. I called for service and someone showed up in about 3 days. The tech opened the unit and found that the plastic/composite drum the spin unit was contained in split in half all the way around. The tech exclaimed he had never come across this issue and would report in what he found but that he did not have the part and it would most likely be a whole new unit but that its up to whirlpool to make the call. I would find out that whirlpool had decided that the unit can be fixed and they have ordered the part and would call to schedule the repair.A week went by, with no word. I called warranty service company, Via Services, and they tell me that the part is on back order and that it would be two more weeks before it would come in. Now were looking at being without a washing machine for a month. I communicate this to the builder and they somehow get whirlpool to come out a week earlier than they said they could. The day came for the repair and two techs take nearly 8 hours to repair the unit (how is this efficient?).After the repair the unit ran with an odd noise that I attributed to the way it was stacked. A month goes by and two days after the 30 day repair warranty I go to do a load of laundry and the unit turns on but wont run. I called for warranty work because it was clearly not repaired sufficiently. I schedule a tech visit which is for a week after. The day come and the tech says he cant fix the unit without charging me for the repair because it is now out of warranty and if I have the extended warranty then I need to set that up with the extended warranty group. I send him away because I had just paid for the extended warranty. I called whirlpool for the extended warranty work and they schedule a repair contractor to come out in 3 days.The repair contractor calls me directly to confirm if the unit is side by side or stacked. I let them know that the units are stacked and they say they cant repair it because its a two tech job and they dont have enough techs. They send me back to talk to whirlpool. Whirlpool then notifies me that because its stacked I have to either unstack it myself or hire someone to unstack it for me. Well, I cant unstack the unit by myself and why should I have to pay someone to unstack it when thats what the unit was designed for? At this point I am going back and forth with the builder to get a refund so I can replace the unit. I will forever steer clear of any whirlpool or subsidiary products. The products are flimsy and the service is no better.

We bought the Whirlpool duet washer & dryer in the winter 2011. The washer is absolutely awful. I have to keep it set on the Whitest White setting so every load gets a second rinse. In order for my clothes to smell CLEAN I use bleach in every load I can. With the loads I absolutely cant use bleach in, I have to be standing waiting to put the clothes in the dryer or I have to rewash the entire load because of the smell!! My towels are ruined from the bleach and my clothes are faded because of the multiple wash cycles. I have used the recommended Affresh numerous times and it does not help! Needless to say this washer was a total WASTE of money! We will be purchasing a new washer very soon! It will NOT be Whirlpool!!

I purchased a refrigerator from this company Model #WRF989DAM. It worked for only 14 months. I had service people come 4 times to try and fix it, called customer service and was suppose to get a replacement, paid $300.00 for a different model, been 49 days and still have no refrigerator in my home. Had to go out and buy my own replacement. I have called and sent emails with no response of when I would be getting the replacement.

This is the worst washer Ive ever owned. It consistently gets off balance, doesnt clean the clothes, and is a perfect example of poor design. I have owned the washer for approximately 9 months, and hate it. Im getting rid of it as soon as possible.

I bought a dual oven Whirlpool 2 years back. This range keeps breaking knobs that are such a poor quality. I have bought knobs from Whirlpool 7 times already then got PSEG home service and they are tired with the quality itself. Save your money and buy another make! Poor customer service and the worst experience is what I have gained on buying this make. Have old mother at home and this headache only created more issues to help her with cooking.

I purchased a Whirlpool range from Lowes for $750.00. After 13 months, the digital circuit board went out and cost $580.00 to repair. I thought this was odd since the range was fairly new. The service tech said the boards are a common problem. Two years later, when using the self-cleaning mode, the door was locked and the board was out again. So this must be the issue because that is the same problem that happened the first time. This must be a design flaw! The board cannot handle the heat generated in self-clean mode. Way to go Whirlpool, put the board near the oven door where it is subjected to extreme heat and melts!

Bought this model #WTW8500DC from Lowes in 2015. Ever since had problems. Stopping in the middle, not starting, recently keeps running water, lid lock issues, had multiple service calls and multiple hardware changes, paid extra for extended warranty from Whirlpool hoping that within a year all problems would be gone after so many repairs. Boys I was wrong. After spending around $1200 between this machine and the extended warranty, three year later after the warranty expired now I am stuck with this non-functional piece of junk and looking for another washing machine. Would love to hear from Whirlpool if I stumbled upon a lemon, or three year is expected life of their $1000 plus machines.

I just purchased a new Whirlpool 6th Sense hot water tank #333570. This unit is a piece of garbage. Whirlpool should be ashamed at the quality of product they make. This unit came with a bent temperature and pressure relief valve, which required a piece of copper tubing to be bent awkwardly just to remedy the situation. Also, the control box is set at 12 (most other brands are 14, which is common), forcing the gas lines to be re-piped (very expensive). This unit also is extremely noisy, runs really, really hot and is not energy-efficient at all. Shame on me for not researching this product more closely. If youre buying a new hot water tank, steer clear of Whirlpool products.

Too many times my clothing comes out dirtier than what it was going in... Sometimes my clothes come out dry in spots, never washed, lint and white soap spots on clothing as if never washed after a whole cycle. Huge waste of money and time. Cant trust any positive reviews about Whirlpool, they have to be rigged!!! I will never purchase another Whirlpool product again.

In 2008, I purchased the 40-gal. Whirlpool electric water heater to replace the original unit in my home that had lasted 14 years without issue until it died of old age. After about 2 1/5 years, it died and I was given authorization to return it to Lowes at my insistence. Now after another 2 1/5 years, this one has died. So far, I have replaced both elements, lost a days work, missed out on a date because I could not take a shower and now Im told I have to replace the electrical box on top which wont get here until Monday. Its Saturday and I havent been able to take a shower in my home for 5 days now.The first CSR (Crystal) I spoke with implied that since I had 2 consecutive failures, this was a site problem, not a product problem. Theres nothing special about my site, and my old unit made it 14 years with zero repairs. I would argue that since both of the units only lasted 2 1/5 years, that the product is substandard. I asked to speak to a manager but was told no because they were all busy (no doubt) and her demeanor was unapologetic and unsympathetic. The second CSR (Nick) I spoke with was very nice and at least sympathetic. That goes a long way in customer service, but I was still not allowed to speak with a manager.I am going to try and repair it one more time, but I have zero confidence in Whirlpool and would never buy another Whirlpool product of any sort again. If I get it working, and after all Ive read here I doubt that I will, I will only be using it for the time it takes to get a replacement of another brand. This was my first experience with a Whirlpool product and you can be sure it will absolutely be my last.