It took several delivery attempts to get a refrigerator without cosmetic flaw and it only lasted four years before Freon leak in evaporative system occurred. It would have cost more to repair than replace. Needless to say, I replaced it with another brand.

After doing much research on refrigerators, I chose the Whirlpool with the French doors and bottom freezer. Within a month, I had to call the repair service. The freezer made a thick layer of ice on the bottom, wouldnt shut properly (I had to keep a heavy box in front of it to keep it closed) and frosted over all the food in it. On his second visit, the repair man told me that the company knows about the problem, that there was a problem in the design of the appliance, and created a piece to be installed in the machine to alleviate the problem. The problem has not been fixed with that added piece, and the repairman has been here a few more times. Now the freezer just randomly stops making ice on top of all the other problems it has. The retailer would not take the fridge back, and I refused to buy an extended warranty for an appliance that the company themselves knows is a lemon.

For years, Whirlpool has had an outstanding reputation for quality, so I cannot understand why a refrigerator I have owned less than three years has to have all the shelves and bins replaced. Not the glass, just the plastic. They actually started breaking the first year. I have literally had to tape my shelves together. These are very expensive and yet they are very low quality and of course are not covered on the warranty.The plastic is not built to withstand the cold and/or weight of food products. They need to get rid of the plastic and replace it with metal. I dont want to replace them with the same low grade products. I own the model ED5JHEXTB00 serial # HRU4010107. Also, the ice maker has been replaced twice. What has happened to Whirlpool

My 4-year old water heater has upper/lower sensor issues for the fourth time this year. The rep was supposed to send replacement parts to arrive today (day four with no hot water), but the wrong ones were shipped. A different rep called and offered to exchange the unit for a new one. The expense to me will be $350-$450 for the plumber to uninstall my unit, take it to Lowes and bring the new one back to install. The plumber suggested I take my $450 and just buy a new non-Whirlpool unit. He knew immediately that I had a Whirlpool hot water heater because its the most common repaired vendor. Whirlpool should be covering this expense for re-installation of their inferior product. Poor customer service. Day 4 with no hot water during the holidays with no solution in sight short of me purchasing a new hot water heater. Whirlpool finally got the right parts to me and I paid a plumber $190 to install. One week to the day later, my pilot light will not stay lit. No change in ventilation since it has been installed. I will say I have been dealing with their rep Chris on the phone who is extremely nice and I feel sorry for him. But we all have the exact same issue which is not being resolved.

The dishwasher we purchased is a great deal. I love opening up a dishwasher to sparkling clean dishes. The top rack moves up and down and silverware stores easily in the door. Its sooo quiet and easy to use. I love the hidden buttons that dont attract my toddler! Highly recommend!

Even the repairman said Whirlpool isnt making them like they used to even though they are charging more for newer appliances. The freezer has clogged, ice maker already broken, have to replace $400.00 for just the icemaker. As a real estate agent, I will make sure and let our new home buyers never to purchase Whirlpool again!

In remodeling a house, we got all Whirlpool appliances for the kitchen, right when the lockdown started our freezer went out, 8 visits later from a local repair person, Whirpool will not honor the warranty and get us a new fridge!!! They just want the repair guy to keep replacing all the parts he has already replaced, the repair guy is beyond frustrated with Whirlpool and their crap!!! Never again, totally lost a customer here.

Purchased heavy duty dual steam washer and dryer in 2008. Recently got some error codes that we could not fix. Had one service company come in and they could not figure it out. Had a certified Whirlpool company come in and they could not figure it out. They called Whirlpool technicians and they were even unsure of what is wrong. Said they could keep ordering parts and trying them to fix the problem. And of course I would be responsible for the parts. And no guarantee it would be solve the problem. Called Whirlpool direct, to no satisfaction. They said they could send the same company out and have them call the tech line while on site and try to troubleshoot the problem. However, would have to wait another 3 days to get him out. Been a week without washer. I have had washers bought previously last over 10 years without any problems. If these machines are breaking or control boards are going out after about 4 years, then Whirlpool has a bigger problem. Whirlpool supervisor was only offering to maybe a discount on the parts needed, without even knowing if they could fix the problem. Seems to me like they really dont care. Very dissatisfied, will definitely not recommend this product to anyone. And if it ever gets fixed, I am going to sell them immediately.

This machine always leaves me questioning if its going to finish the cycle. It goes thru all kinds of spastic sounds in order to advance to the next step. I learned I cannot presoak a load more than 10 minutes before the machine empties ON ITS OWN! I just dont trust the machine and would not buy again.

We purchased our new Whirlpool Cabrio washer on November 1, 2013. From the start this machines performance has been a disappointment. We bought the machine at The Brick (I should have known better) where we had made several purchases over the years ( I guess Im a slow learner). Right off the hop, my wife and I noticed that the clothes were not coming out clean. Even though the machine is Eco and therefore advertises that it uses less water, there should be enough water that the clothes at least get evenly wet. That may be a problem with the agitator not seeming to have the guts required to pull the clothing down to the bottom of the drum. We went back to The Brick and told them that we were not happy with the machine they had sold us and quite predictably they told us that we should call Whirlpool (This was less than a week after we had it delivered. Did I mention that I may be a slow learner?). We called Whirlpool and they told us they would have a tech out to take a look at it on November 11th. Wow, I thought. Hows that for service. A repair guy coming out on a statutory holiday. Of course it didnt happen. When we called them back to ask if their repair guy had made it home okay, they claimed that we werent there when the repairman tried to call to confirm his arrival time at our home. We hadnt left the nest the entire day. They then told us to go back to The Brick. We went back once again and told them, yet again, that we were not satisfied. This time they agreed to send their own man over to take a look. He came over yesterday and watched the machine go through an entire wash cycle and then said that there really wasnt anything he could do, as even though it may do a crappy job of washing the clothes, it at least appeared that mechanically speaking there didnt seem to be anything wrong with it. We called Whirlpool back today and they said that there isnt anything wrong with it mechanically so from their end, at least, the story is over. What kind of customer service is that????? Maybe Whirlpool and The Brick deserve each other, but I think we should get better treatment than that

I purchased my Whirlpool gas range about 5 yrs ago as brand new. Two and a half years after purchase, I started getting the F2 error and always had to pull the breaker to stop the oven. Whirlpool would not do a thing, they wouldnt even listen to me. So I bought a new control panel. Now once again here it is the holidays and Ive started getting the F2 error when I try to use the oven. So needless to say this is my last Whirlpool appliance. And the Service Officer wont even listen to me when I say I have to buy a new oven.

We have had a Whirlpool dishwasher for about 2.5 years and have been happy with how it cleans dishes. About a year ago we replaced our counter top and in the process had to adjust the bend in the mountain brackets that attach the dishwasher to the underside of the counter. This requires flexing the thin piece of aluminum at the perforated line. In the process, one of the brackets snapped. The other was barely still intact and broke several months later. I tried jerry-rigging them, but eventually decided to replace them and called Whirlpool customer service to ask for replacement parts.Unfortunately, Whirlpool wanted to charge me $10.50 apiece and another $9.00 for shipping and handling. These parts could not cost more than a few cents apiece. I was shocked that they would charge me $30.00 to replace these flawed parts. Never have I had such and experience with any customer service department. The three people I spoke with were all rude and unapologetic about my situation. Two blamed it on the install...Ive installed plenty of dishwashers and never had any problems in the past. Even if it was a failure on my behalf, the simple replacement of the parts for a reasonable charge would have been fine by me. I told them Id be happy to pay a few dollars and to pay the full shipping fee (which was also high, in my opinion), but they refused to meet me halfway. I can only think that this is part of their business plan...make dishwashers with sub-par parts, and then over charge for the replacement parts when they fail. Well, I re-upped my jerry-rigging efforts and have improved the engineering of the faulty part. Save my $30. But Whirlpool will never again get my business and Ill be sure to steer clients and friends away from this brand as well.

Had one double wall oven lasted 15 years with just about no problems until the control panel broke and could not be fixed. Bought another just like it and it is having problems after 6 months. Light wont work. Turn on from the control panel and the time does not work.

Well, I read most of the complaints with the failures in the machine. I guess most of them didnt last long enough to rate their performance so here we go. I bought a Cabrio top loader, high-E washer a couple of years ago. This one had a different kind of agitator - it was just a couple of inches or so off the bottom. I specifically bought this to wash comforters and it seemed like it was good for that (rousing agreement from the salesperson). So after a couple of years of working with it, here are my observations:Pros: There are absolutely none!Cons: Okay, other than not having control over the settings (cannot override any of the preprogrammed wash settings), it simply doesnt get loads clean (yes, I use expensive HE detergent). Except for the bulky setting, there is never enough water to wash and rinse the loads properly. Next, it makes a mess of the clothes. At the end of the cycle, and this is true no matter what I wash or how large or small the load is or which cycle I pick - even light and slow spin, it just makes a tangled mess of the load. Stuff gets stuck inside of other stuff, wrapped around other stuff or are balled up. Never have I seen this type of issue. I constantly get the unbalanced load notice and have to manually redistribute the clothes most of the time.To address the too little water level, there are two options. I have discovered that the bulky setting has the highest water level, so I use that most of the time. From time to time (when I need different water temps or just want more water), I have developed a work-around by putting a Y adapter on the hot water inlet and a short hose. Once the washer starts the wash cycle, I stop it and add a bit of hot water to bring the level up enough to do a decent wash job - same for the rinse cycle. So much for Whirlpools water efficiency.Next, the hot isnt hot. Its barely lukewarm. So I turn the cold down to a trickle and I get a bit hotter water. It takes forever to rinse though. Its a good thing Im semi-retired. Next is the inflexible cycle/water selector. I have never had a washer I couldnt override to tell it what to do in unusual circumstances. Boy, what rocket scientist at Whirlpool dreamed that up!But above all, this just doesnt get loads clean. I have experimented with all the variables, load size, cycle selection, detergents, etc. Most of the time, I have to do two cycles with my loads and these are not unusual or extremely dirty loads. They are just normal, everyday laundry for an adult couple. Really, Whirlpool! Who was the conceptual designer on this? Thank goodness they werent working on the space shuttle or some disease research.Bottom line, I am so soured on the design and performance of this product that I will never buy another Whirlpool product, either brand name or generic (Sears). I just cant understand how a company would let something like this out the door.

After years, the gas hot water heater model fg1f5040t3nov went out. The plumber had me get a new part. 2-3 weeks ago, it went out again. I am trying another new igniter assembly. If it goes again, Im getting a new heater - not a Whirlpool! My plumber says he can get me a new one for a little more than I spent on the Whirlpool, and its much more dependable.

Purchased double range ovens. Enamel is flaking off within 2 years. Whirlpool denies defect. They wont replace it. Any other folks with similar problems? What can I do to have it replaced? I remember the old ovens and how the enamel just stayed and stayed and stayed. Never a rust or flaking issue in those old time models. Any expertise on how the enameling process may be compromised in the newer manufacturing process (cutting corners or costs). Any options for a class action here if a commonly experienced occurrence? If similar experience drops comments/review below as a one liner - just state enamel defect. That way can figure out the number of folks with issues. Id like to take action if given the opportunity, and more so if this is a common occurrence. Lawyers are costly for one-off complaints, but there is power in numbers (think United Airlines).

I bought a whirlpool microwave on August 8th. The microwave was missing parts. I called whirlpool. They said they were sending me the parts, mind you this was not a floor model. So 2 weeks later pass I received no bracket No screws. I called whirlpool oh yes we got the address wrong. Resent it, just one screw no bracket and I needed 2 screws. I called again oh yes we did get the order for the bracket too but you have to pay $7. I said ok no problem. Can you do fast shipping? They said sure. I called Monday August 25th. They said I should receive it by Wednesday August 27th. I had to pay extra for the shipping. Here I am September 2nd w/ no bracket. Called again. They said it wasnt next day shipping, it was 2 day shipping and its at the post office. But the shipping number they gave me was for the one screw. I believe I should get my money back. I spoke to a supervisor, took her number down. Still waiting for a call because the mailman came and I didnt receive anything yet again.

I have the same problems that all the consumers are complaining about. I have a Whirlpool refrigerator with the freezer on the bottom. I have it for 2 years to date, and it doesnt keep my food cold. I loved the roomy space it had; thats what sold me the refrigerator. If I would know what I know now, I wouldnt have bought it. I will never blame the business that I bought it from; I will blame Whirlpool. Hearing all what the consumers did to try to fix the problem, it sounds like a waste of time and money. Im sorry to hear what you went through, but also I want to thank you for your complaints so I dont have to deal with it. Whirlpool sounds like a piece of junk. I’m going back to a GE.

The first thing I noticed after purchasing this stove was that the glass top did not clean properly. I used the product given to me by Sears and tried several others but still could not take marks off of the glass top. I never really used the oven that much until retired and started baking often. The self clean does not work at all unless by self clean they mean that you yourself cleans -- I should say scrub it down. I previously had a regular self clean and it truly self cleaned. All I did was take wet paper towel and wipe out. Yet when I asked the Sears saleswoman about how it cleans I was told that it was terrific -- I would not have any problems! What a laugh!

Whirlpool Gold Series - I bought this dishwasher less than 2.5 years ago. The thing already broke. The motor needs to be replaced at a cost of about $250. The thing never did a good job anyway and often had to run it more than once to get dishes clean. I paid about $650 for the machine so I guess its just a throw-away appliance. Whirlpool makes complete junk. I will buy a different brand that is known to have long-lasting dishwashers. I guess you get what you pay for.

The price expensive for the quality of the Whirlpool Refrigerator. In some parts looks like unfinished and you can see the glue and inside foam. The space is limited for big containers like milk and the fridge gets full with two bags of chicken breast.

Purchased a new Whirlpool washer and dryer at Best Buy 6 months ago. We complained to Best Buy and Whirlpool about our clothes not getting cleaned. In other words, my clothes are coming out of the washer dirty. My make-up towels come out with make-up, my husband’s fishing clothes smells like fish and my son’s bike riding clothes is full of dirt. Whirlpool’s answer was the technician is reporting that the machine is working fine. Whirlpool told me to use different cycles and detergent etc. and I have done everything they ask, but my clothes are still the same. I told them this is a defected item. A washer should do its job - wash dirt and smells out. I want a different washer and they refuse to exchange this item for another washer after a second call to technician. Best Buy is telling us there nothing they can do for us. What has America come to? The manufacturers and dealers are selling to consumers and taking advantage of them by not responding to the needs of the consumer. In other words, we the consumers pay for product, take time from work and personal time to reports these problems and we get nothing back, just the run around. Is there something we can do? What can we do? This is very frustrating. We work for what we need. We pay for what we need and we dont get what we need. On the other hand, the manufacturer and dealer get what they need, our hard working money. What can we, the consumer, do to get our hard working money worth????? If anyone knows, please share your experience.

Our Whirlpool Dishwasher model WDT710PAYW is less than 2 years old and is rusting on the outside of the door where the steam vent is. Apparently the hole that was made in the door for the vent was not sealed, now the paint is blistering up due to the rust. Will not purchase another Whirlpool.

May 4 I ordered a washer and it was to be delivered on the 21st and on the 20th a salesperson calls me to say my ordered washer is out of stock and she gives me a substitution washer that wont ship to me until june 20th a month away even though I already had been waiting a month, I was very upset and said, I wont accept it but let me think about it, I thought there must not be anything sooner (BIG MISTAKE). So I called back and accepted but after getting off the phone looked online and found a washer that would be delivered on May 28th and it was just delivered no problem but now no one at WHIRLPOOL can find the subbed order to cancel and give me my refund from the out of stock washer... So I have paid for 2 washers and every time I try to get help I have an hour wait to get a person. I am a 65 yr old woman who has been put thru so much stress and it is not good for my health. All I want to do is cry.

Got the dreaded 4 flashes LED status - High Temperature Shutdown. Online and vendor documentation says that this condition requires gas valve unit replacement, a $115 option. If your Pilot remains burning, but main burner does not kick in, then a good guess is the circuit board requires a reset. Prior to any further work, test the Thermopile, that is the round item with two blades located below and to the right of the gas valve unit. Move knob on control panel to OFF1) Pull out plug with red and white wires located on front of gas control. 2) Have someone Hold in the control knob on the unit at Pilot, and make sure Pilot flame is burning. 3) Using a multi-meter, set it to millivolt reading, and test voltage across the two wires. Voltage should be greater than 350mV, preferably >500mV. 4) If you get a reading in that range, your Thermopile is good. Turn knob to off position. Do NOT uncouple gas lines. 5) Piezo Igniter wire comes apart, disconnect it. 6) Remove screw that holds front cover. (screw located bottom left as you look at the unit) 7)Cover simply pulls off directly towards you. 8)Remove the screw holding the circuit board to the cover, and remove circuit board by unclipping it - 3 clips, one either side and one at bottom. 9) Unplug the 3 strand thermostat cable, you should now have the circuit board clear. 10) Take a piece of aluminum foil, fold it twice, then lay circuit board on it facing up, do it on top of tank, want it grounded. 11)Using one of the multimeter probes, wrap a piece of foil around it, keeping point free, and ground it too. Then slowly work around the board, touching all the solder connections you see, as well as the chip legs. Pay particular attention to the round objects on the board (capacitors), make sure to ground out each of the solder points, visible either side. (takes about 5- 8 minutes, take your time) 12) Once done, reconnect thermostat cable to board, then reinstall board into cover (dont forget the screw)13) Place cover back into place, screw in cover screw, reattach Piezo wire and black electrical plug with thermopile wires. 14) set Knob to Pilot, get pilot lit (may take a few hits on the Piezo button) and while still holding the knob in, watch to see what LED flashes you get (there will be a 10 second time lapse before it will start to flash) 15) You should either get 1 flash or 7 flashes, that means the board is reset, now turn knob to warm, and see if main burner kicks in. Good luck, and for a half hours work you have saved yourself $$$. PS: If it occurs again, you have sediment build up, need to drain the tank.

Bought a Whirlpool Cabrio Washer, which I see has MANY complaints. I had a problem with the F1 issue during the first year. Same issue and I was also told Whirlpool knows it was bad design yet they refuse to help the consumer in anyway. Maybe 50% a new WP washer. Upon my call they will fix it for 389.00 and give a 1 year warranty again. Im no longer confident in WP products.

In Feb. 2014 we moved into a new Condo and bought all new kitchen appliances, MAKING one mistake, a Whirlpool side by side refrigerator, Model WRS322FDAM 01. It had to be ordered and was received by Lowes on March 10th. Letters from Whirlpool told me that their service warranty had ended as of 2/1/15 which predated our receipt of the fridge. It is a bit noisy with the ice maker, and when it fills up with water, you can hear it, and yes, the ice does fly a bit when you put it into your glass.The worst thing about this piece of junk, is how cheaply it is made. The materials used must have come from the rejected pile of parts. Its just my husband and I, no grandchildren/children and very little company. So, the fridge received average use and then within 6 months, one of the drawers cracked at the back. I tried to glue it back together myself because I was told that it was not a covered item??? My repair lasted a few months and then came apart entirely. When I removed the broken shelf I noticed something around the LED light on the liner in the back of the fridge. I pulled out the meat drawer and found a crack that began at the bottom of the light and had moved about 3 inches to the left, and another one that began at the right of the light and that was about 4 inches or so.Life intervened and when I looked again, the right side crack had split and deepened and it had now crossed over to the rounded edging connecting the back liner to the side liner. The left side crack had also moved further to the left, and is now approaching the side corner. I spoke with Whirlpool and they sent out a repair company who e-mailed a photo of the cracks to them from our home. The company response was that they would cover the crack with 482395 liner tape. - this was their idea of a repair.I then spoke with a Lowes representative who agreed to send another repair firm out. Well, they came today and when they spoke with Whirlpool, they were told to order an Epoxy kit (# 8212572) - this was their version of a repair. I spoke with a supervisor and told her that they were not repairing the liner, they were just placing a bandage on top of the crack. I compared it to owning a new car but having cracks in the dashboard. In this case the dealer would place tapes over the cracks instead of just replacing the dash. Neither response from Whirlpool was a repair. All they were doing was hiding their piece of garbage. She disagreed and would offer nothing further. I told her that I was going to bring this to the attention of any consumer group that I could, and might even see if a class action suit could be brought to bear as there were many other reports of cracked liners. We are totally disgusted with the product and its manufacturer. Whirlpool used to have a good reputation, but after this, it is now at the bottom of the garbage barrel.

Purchased a new home in Florida. Builder used Whirlpool appliances. For a year opening the refrigerator door has caused breakers to trip off. No matter what builder and Whirlpool do, breakers keep tripping. Cannot sell house with this issue. If someone was counting on electricity for a medical device they could die when refrigerator causes power to go out. Unfortunately, it looks like legal action is the only thing that will save our investment in the house.

Bought this refrigerator in 2018 and ice maker went out 2x, then compressor went out and waited 4 weeks for part. Now the refrigerator is broken again and not cooling. Dozens of other reviews indicate the same issue with this model. It’s clearly a defective model. Customer service in Tennessee are very friendly but my refrigerator is still not working. Whirlpool French door - wrf954cihm.

Reliability. I have bought Whirlpool used and new and they have been the best washers that last so much longer than other brands. They also have more than enough settings to truly take care of everything in your home that can be washed.

After one of the door shelves in our new refrigerator cracked, I ordered a new shelf from our local agent Neuman Appliance repair in Ashmore, in July of this year (2014). I was told that it would take a while as Whirlpool were notorious for poor service; however, it is now the middle of September, and we are still waiting!When we ordered a new part for our dishwasher from Fisher and Paykel, we received the part in just 3 days. I mention this to give an idea of what good service should be.

Our Whirlpool gas hot water heater was purchased and installed (through Lowes) in April 2008. In February 2009, the thermostat failed. Because the failure happened less than a year after purchase, Whirlpool replaced the part and paid for labor.The hot water heater failed again three weeks ago, and we contacted Whirlpool. We were once again provided with another thermostat, and were charged $135.00 by a plumber to install it (even though the customer service rep stated that there were known issues with this tank model). The tank is still not working properly. We (with our tenants) have tried troubleshooting according to their instructions, to no avail. It has been three weeks now, and no resolution.The heater has a six-year warranty. Not sure what this means if the product is defective to begin with. We pay to attempt to repair it?We will not be spending any more money on labor to install parts that may or may not work and have demanded that Whirlpool replace the heater. Whirlpool has refused to pay for any labor costs and told us that we must take the heater back to Lowes. So I suppose that means we have to pay to have a 3 1/2 year old heater removed from the gas and water lines, transported to Lowes, and a new one installed. What a deal.Stay away from Whirlpool.

Purchased from Home Depot and self-installed. That part was not too big a deal but after installing this stove we started a journey of irritation, aggravation and general dissatisfaction. This stove has the standard layout for burners that seem to be common to most low-end stoves. Two huge burners in the front, a simmer burner at the right rear and a general purpose burner at the left rear. Thats all wrong for me and our set up. I want a large burner at the left rear and general purpose every place else. Can you alter the standard configuration? NO! Not without some major alterations to the stove top.Next are the grills or cast cooktops (2 each). They are a bit cumbersome when cleaning the stove but doable. The real problem with the grills are Whirlpool decided to save money by skimping on this feature. The grills are not a stable cooking platform for smaller pans and it turns out Whirlpool recommends square pans for this stove. SAY WHAT? I have pans and skillets from my grandparents and they are ALL round. Thats how that stuff is made. ROUND! The grills design is unstable for any round pot, pan or skillet, if its diameter, is 6 or less. Kiss that excellent saucepan goodbye if you have this stove. My current solution is a piece of light expanded steel over the burner areas.Keeping in mind we use Propane as our heating gas. The adjustment of the flame temp on the four burners is non-existent. They all are either on high, medium or low. There seems to be no fine tuning with these burners. At the end of the day go look for something that is NOT a Whirlpool, LP gas range Model #: WFG515S0EW. You will be better served and less irritable with almost anything else. Even a campfire in the yard is a better choice.

I purchased a Whirlpool classic range model number rf263LXTS0 on January 2010. We had some hang-ups on the kitchen renovation and were not able to install the appliances until May of 2011.I used the cooktop that evening and was very pleased. I then went to use the oven 2 weeks later and it did not heat up. I asked the contractor to check things out (maybe it was something minor that he could fix). He checked the things that he installed and everything on his end was working fine, so he told me to call Whirlpool.A service technician came out and, within 10 minutes, said that the oven controls were defective.I paid $450.00 for the oven originally. The service technician charged me $136.74 for 10 minutes to tell me that the oven control needed to be replaced (that is the major part of the oven) and that it would cost me $318.41 to replace the part.I called Whirlpool and explained my circumstance and Paula, the supervisor from Tennessee, said that there was nothing she could do. I told her that even if I installed the oven back in January of 2010, the major part of the oven should last more than 1 and 1/2 years.What terrible craftsmanship and crappy customer service. It is sad that customer service cant stand by their product and Whirlpool has to rely on making their money on repairing defectives products. I now have to go out and buy a new oven. I also buy a lot of appliances in my business and I will never buy a Whirlpool again.

I purchased a 50-gallon Whirlpool natural gas water heater (12 year warranty) from Lowes approx 2.5 years ago. Just before Thanksgiving, the pilot light started going out once a day, then twice a day. Now, I can light the pilot light in Pilot mode but as soon as I release the red button, the flame goes out. I called Whirlpool and received phone troubleshooting support resulting in a recommendation to pick up a new thermocoupler from Lowes which I did. While searching for someone to install (unfortunately Im not that handy), I ran into the thousands of complaints filed about the very same problem Im having over a number of years and right up to todays date. I called Whirlpool back and got the same song and dance. Theyd be happy to help me troubleshoot if I can get the required meters etc. to test devices, do draft tests, etc. They claimed the problems were fixed with the newer model that I have but certainly cant explain why I have exactly the same issue. What they are not willing to do is stand behind their product and get me hot water. Tried calling Lowes and got the response that I have to deal with Whirlpool. It appears that this newer BFG model is just as flawed as the older model and the warranty is pretty much worthless other than getting a few parts. I used to think that Whirlpool products were reasonably good, however, I will never purchase another.

I purchased the Whirlpool Cabrio set about 5 years ago. My problem is that the washing machine has NEVER gotten our clothes clean. The dryer is fine but the washing machine is useless. Clothes come out of the machine in the same state that they went in even if I use stain remover. Dont buy this machine!!

Sears, Whirlpool Cabrio Platinum washer and dryer purchased spring of 2013. I thought this would be a good combination to purchase quality appliances that would last for years. NOT! These machines are used by my wife and I only. Washer: Bearings go out. Repair: Replace tub and bearings. Quote: These things arent made to last more than about two or three years. Another quote. Do you notice that your clothes arent getting dry? Yes. Yeah well, you have to use the timed dry setting because the regular setting shuts off as soon as it senses one piece of clothes is dry and leaves the rest of your clothes damp. DO NOT BUY.

This machine has been very reliable. We have had since 2001 and have had not issues, Im really not sure on how clean our clothes are. Sometimes they have a odor but this is common with front load washers. I leave the door open and put baking soda into the machine regularly. Also clean the rubber seal because mold will accumulating on it.

Whirlpool oven WOD93ECOA501 - This oven will most likely lock up if you use the clean cycle. I wish there was a class action suit in California. This happened first time I used the oven. Very expensive to fix, and though it was 9 months after a kitchen remodel, it was not under warranty because we bought it early and it sat in garage, and Whirlpool could only use purchase date. This is not new technology. Upper and lower oven both locked. Wish I had bought a Blue Star oven, as my Blue Star cook top is fantastic and a pleasure to use. HAS ANYONE GONE TO SMALL CLAIMS COURT?

WARNING: Do not get the warranty plan through Whirlpool if you have stackable washer and dryer, you will have to remove the dryer yourself before they come out to service your appliances. I was willing to pay extra to have them take it down, the contractor said I had to call the extended plan service, yet 6 telephone numbers later to include the complaints department to no avail... Whirlpool contracts out so get your own and you may save a few dollars!

WE had a Kenmore dishwasher and it never got the food off without scrubbing the dishes first. We decided to get a new dishwasher after being very frustrated. We purchased a Whirlpool and noticed a difference instantly. It was quiet, got the dishes completely clean, (no pre-washing like before) and was overall a better fit for our family.

Had to return my first 2019 purchase due to refrigerator freezing food and imbalanced top doors. I was unable to get straight answers from Whirlpool and so the mgr at BB gave exchange same problems except door not as off. Cheap product make/model. A class action lawsuit from 2016 has occurred and the company continues to distribute the same issues in their new make/model.

The oven steam cleans the oven but it only cleans the bottom, not the sides, back or door. They dont recommend oven cleaner so how do you clean it? My oven is a year old and looks like its never been cleaned. You would be better off with non cleaning oven and using oven cleaner. It would be less work. Horrible stove.

They are good washers but they are overpriced. They have way too many functions for doing laundry. I know everyone wants their washer to do it all but the machines just can’t. There is no washing machine in the world that can sense a stain and pinpoint it and remove it.

We bought this microwave/hood combo at Home Depot and installed it in our second home roughly 16 months ago. We used it very little over that period because the home is only for vacations. The plastic handle began to disintegrate where it connects to the door (top and bottom) to the point where there is very little plastic remaining. We called the service center and the woman attending to us told us she had never heard of that happening before. Either she had just started working there that day, or she was lying because there are dozens of similar complaints on this very website.I do not understand what is to gain by denying a manufacturing defect. It simply makes no sense to me that a company would allow their reputation be so tarnished. What an ignorant and short-sighted business practice. I will never, ever buy another product from this company. I will also be sure to tell anyone who will listen what I think of the shabby service they gave us.

We bought a Whirlpool washer and dryer set (Cabrio WED7300XWO) 2 years ago. Within that time, the door seal fell off and needed to be replaced. The drive belt pulley became detached, and now the drum seal has fallen out and had wrapped into the clothes. I have never experienced such a substandard product. We would trade back this one for our 15-year old set we had replaced it with at the drop of a hat. We are retired and have a summer home, and only use this product 4-5 months a year. Never again, Whirlpool!

I am a Whirlpool Privilege Member - IFB privilege number **. This is Mrs ** here and I possess two Whirlpool Fridges, one single door and one double door (Elite Model). In fact, all my family members have Whirlpool refrigerators because I recommended them and because I have had a very satisfying experience with your service until now.I recently (first week of March) logged a complaint as my fridge was not working (it was working on and off). The Mechanic from the service center visited us and said that the compressor was at fault. I had some doubt about this as the Fridge was working on and off and I requested my friend who had a workshop to come and have a look. He checked and said that the compressor was working perfectly but looked like there was some problem in the supply of current which could be a loose contact or something.So I logged another complaint and when the mechanic came (this time a different one), I was out of the country and my husband was there in the house. He checked the fridge and said the compressor was working and apologized for the earlier mechanic’s wrong diagnosis. He also said that it was difficult that since the wires were inside the beading or the Puff, or whatever, the fridge could not be repaired.I am really astonished and pained by this comment by the mechanic as we spent a lot of money and bought a fridge for its brand worth name. I shudder to think if this complaint had happened two years after I brought it, should I simply throw the fridge because it cant be repaired? Is there anything at all where the company can say it can’t be repaired? Are fridges used and thrown in India? I am all the more worried because I have been recommending Whirlpool Fridges left and right to everyone and I tell them that there could be a situation when Whirlpool would ask you to simply throw your fridge away. I still have belief in Whirlpool and I firmly believe my recommendations would not go wrong, and it is only the fault of the mechanic who could have made this remark unwittingly.

I bought new and both have broken over and over. The oven takes forever to heat up. The fridges ice maker broke and then the defroster in the fridge side broke. Dont buy Whirlpool.

We purchased a 4.8 Cu FT High Efficiency Front Load Washer in February of 2016. What a nightmare. Just a few months after having it, we kept getting an E3 error message that would not go away. After 2 weeks of waiting before a tech could come out there replaced a door mechanism said it would be fine. After the next wash same thing, same problem. Could not even open the door to get my laundry out. Again they could not get a tech out for at least 2 weeks so Im stuck with the cost of getting my laundry done elsewhere. This time it was the motherboard. Had to wait a week for that to be shipped out. This was all completed in June 2016. We are now the beginning of September and same problem. Again we are told at least 1-2 weeks to get a tech out. Seriously Whirlpool, we are your customer. I have a family and we need to wash our clothes. We spent $1200 on this machine only to have to take our laundry to a public laundry mat because your machine keeps breaking down. They will not replace the machine even though this is the 3rd time with the same problem. The customer service is horrible. They are not willing to help in any way to get this fixed much sooner for her or give us a new machine. This one is obviously a lemon! I will never purchase any Whirlpool appliance again and I suggest based on some of the reviews on here no one does. Next appliance I buy I will do more research for sure.

Purchased the new dishwasher in 2009 through the builder of our home. I quit working completely like there was no power to it. We replaced the fuse to it and then it worked, but kept pausing during the cycle. Sometimes it will completely go off and then when the control panel comes back on, it sits paused until you push the button. We replaced the computer with a new one and it works even worse. It shuts down more often and still requires a restart. So frustrating! Appliances should last longer than a couple of years.

I work on Whirlpool refrigerators for a living every single day of my agonizing, miserable, lousy life. Ive never seen such a mass of dysfunctional, defective rejects as I have with the new Whirlpool side-by-side refrigerators. The ice maker never works because the water line always freezes in the door. The food in your refrigerator side will either spoil or freeze because the damper door will stick open or freeze shut. The water filter housing will start leaking before you change the filter for the first time because of the inferior quality of the plastic its made from. And of course my all time favorite the compressor will always go out under the first 5 years (Thats why Whirlpool changed the warranty from 5 years to 1 on the sealed system). Ive never been a big extended warranty believer. But, like old saying goes, They just dont make them like they use to. Definitely applies to Whirlpool refrigerators.

This machine needs to go back to the engineering dept. There are too many engineering defects to mention. My Cabrio washer and dryer was delivered October 11th of 2017. It is just my husband and myself so laundry was scarce. I have been unhappy with the washer since the beginning and just recently decided to try and solve the problem. I contacted Whirlpool first and was told these machines have great reviews and nothing is wrong with them. When I started describing the flaws, there was one excuse after another and the person from Whirlpool blew me off. The flaws... all begin with not cleaning which is caused by design. The water level, even with the deep water setting, does not even cover the amount of clothes in a small load; the agitator is so small, there is no effect on agitating the clothes; even with using a SMALL amount of HD detergent, there is always soap residue on the clothes because of the lack of water; and last issue but not final is the load going off balance. The machine will walk all over and error codes according to the repairman need to be cleared so must call if it happened again. Well, the very next load it went off balance again. I did not call because I would have the repairman living with us and I am not willing to set up a bedroom for him or feed him. So, Whirlpool does not care if their product needs redesigning, they only care about selling their product and then the consumer is on their own. Basically the same train of thought from Best Buy where we purchased the machines. Best Buy would be happy to sell me another laundry set... per the store manager but that is all he could do. Will I purchase from Best Buy again... I think you know the answer to that. If they cannot stand behind a product they sell, then they can keep everything they sell, no more money coming from my checkbook to them ever again. Someone, whether the manufacturer or the retailer, should be willing to stand behind their product. But, no one cares. Bottomline, do not believe the ratings on the Cabrio washer. This machine has design flaws that cannot be corrected.

We have had this washer for a year and the longest it has run before breaking down is 3 weeks. Since it takes longer than that to get a repairman out to look at it and another 2 to 4 weeks to get parts, it has run less than half of the time we have owned it. This thing is a hunk of junk. Dont ever consider purchasing one of these lemons.

Whirlpool washing machine has always been reliable for me. I have owned 2 and they lasted me many many years. Its easy to use, and cleans clothes perfectly. My family is also a fan of Whirlpool appliances.

When renovating my kitchen I went with all Whirlpool appliance. I have nothing but trouble with my fridge. About a year old we had to replace the motherboard at our expense. After having that done, about 6 months later I had to defrost it so it would work again. Now it has to be done every month. All they say we can book another service call at my expense again. All I say thank goodness I kept my old Frigidaire. It saved me more than once. So my advice is stay away from Whirlpool. They dont stand behind their products from my experience.

Purchased a gas stove June 10th, three days later smelled gas. Called the store where I purchased item, they gave Whirlpool 800#. They set an appointment 2 weeks out. Got part then burners only clicked. They ordered more parts. Now top range works. Started to use oven and got extremely hot. Called store. They referred back to Whirlpool. After hour and half they scheduled appointment. First appointment he didnt have tools to check temperature. Rescheduled for following week. He said oven was off 30 degrees. I then went to store to ask to return item. They said up to Whirlpool. On phone with Whirlpool over two hours, them switching from one department to another. No help. They insist on fixing again tearing up unit in my new wood floors. Dont buy anything from them.

2 yrs after my landlord installed WHM31017AW1... Whirlpool oven stove microwave. The door cracked then another crack and pieces from door fell on stove. I removed all loose pieces then glued all cracks & loose pieces on door. Landlord thought door was being closed too hard, silly. After all reviews same, not buying replacement door but having different brand installed.

I purchased a Whirlpool Cabrio set 3 years ago based on their brand reputation and consumer reports. It has been a terrible experience since the moment the warranty expired. First, about 1 month after warranty expired, I had to replace the main electrical board. Then about 3 weeks ago, the drain pump failed. I purchased the $110 pump and installed it myself. Now this week, the spin cycle sounded like a jet engine. I took it apart to find that the bearings were shot on the drive shaft. I figured, well it is just a wear item, understandable right? So I went to order parts and got told that I have to order the whole outer tub for $250 with shipping! For some bearings! I called Whirlpool directly and was given no explanation other than Call some parts distributors. They may be able to help you get the bearing separate, but we dont do that and there is nothing that we can do. Amazing. I equate that to having a faulty brake on my car and being told that I have to replace the whole axle!Fortunately, the washer never really did a great job. It was loud and tore clothes up, so the decision to part ways was not too difficult. I have the list of brands they make and will be sure to never buy another. Im selling this one for parts. Im sure there are others out there that will need a pump and control board soon!

I am a retiree after 35 years and 5 months, the last 20 plus years on salary. I purchased a new Whirlpool washer on April 18, 2012 at Lowes in Tiffin, Ohio. The clerk said to take the receipt to Clyde to apply for my rebate. I was informed by a receptionist that we only get a rebate if our purchase is from Sears. I only went to Lowes because of the urgency and was not aware of this change in your policy. I consider this a real slap in the face after all the years of what I consider excellent service to Whirlpool Corporation.

Although stackables are a little pricey, Ive had this dryer for around 10 years and its still working just as good as the first day! Never had any repairs done on it. Great dependable dryer and washer!)$ Ive dried regular size loads in it also! A loyal appliance through and through! Thanks Whirlpool for such a great and dependable product! Whirlpool Heavy Duty-Automatic Dry Miser-End of Cycle Signal*3 Cycles.

I bought a whirlpool cabrio with high hopes. Unfortunately, it has been the worst washing machine I have ever had. Then I moved in with my fiance and he too had a cabrio. It too is a piece of junk - and brand new! Every load comes out with left over residue and the clothes look worse than before they went in! I have tried everything and I do mean everything! IM 41 y.o. - IM well aware of how to load a machine. I load it just the way the instructions say: as if there was an agitator there. Ive tried using no laundry detergent or fabric softener - clothes still come out disgusting. Ive made sure the screens are clean, doing extra small loads, turning on the extra rinse, everything! Ive called whirlpool, but there is no such thing as customer service anymore. They just blamed me for not loading the clothes properly and blew me off. The machine becomes unbalanced very easily (it is leveled on the floor), sometimes the clothes are still soaking wet at the end of the cycle and sometimes all knotted up. This is a horrible machine!! I wish I could say it makes me feel better that IM, by far, not the only one having issues with this piece of junk!

My induction cooktop totally failed to work two months after installation. Whirlpool sent a repairman who told us it was the main board. He also said he was unable to locate any of that part anywhere in his computer. We called Whirlpool via our store, Ikea. They apologized, asked for 48 hours to locate a part, then said they would replace the cooktop if they were unable to find out. Almost 48 hours later, they hadnt located it and denied any replacement option. The parts cost is over $800. The cooktop cost just over $900. Whirlpool reps would only read from a script of legal warranty jargon. Then they said they needed 5 to 7 days. We had a baby visiting - we needed our stove. To me, an apology would be replacing that unit if the part wasnt available, not a verbal statement. Fortunately, we had the phone # of a local Ikea manager who told us to bring the cooktop to the store as they had them in stock. They replaced it with a new one. Over the years of my long life, I have bought many Whirlpool products. Never again. I need a washer and dryer, and will not be purchasing any associated with the Whirlpool Corporation. Thanks to Ikea, though, for standing by their customers.

If you are thinking of buying any Whirlpool products, please think twice. We had a dishwasher, lasted 2 years; range with cook-top, within 2 years computer had to be replaced and again in another 2 years. Needless to say we did not replace either one with a Whirlpool. Over the range Microwave Oven Magnetron blows in 5 years. 3 months over the warranty. In a call to Whirlpool we were told we are sorry you have had all this trouble, we will send a repair man out and he can replace the parts needed. Thanks, but no thanks and went out and purchased a Samsung model, probably cheaper than the repairs would have cost us. There are so many good appliances to choose from. Please stay away from any Whirlpool products, no need for additional aggravation.

We had the refrigerator delivered in March, 2013. We noticed a leak in February 2014, only because we smelled a musty smell in our garage, and removed the rug outside the door, from the garage to the kitchen. Then we started noticing water in the garage. It was shortly after we determined it was the refrigerator. We bought this at Lowes and they use A&E, and they did not show up for the first appt. They did replace the pan a few days later while we had to replace dry wall behind the fridge. This time around (month later) we noticed the fridge/freezer was not cooling. So A&E came out and determined its the compressor. So now we threw out hundreds of dollars of groceries, and water was leaking all over the floor again from ice thawing. I believe the refrigerator has had problems all along. We have had it for one year. I think we should be reimbursed for the compressor! Thats the least Whirlpool can do after losing so much food and money spent on the wall, and all the water mess etc. I will never buy Whirlpool again, and I will never purchase from Lowes again. We always bought at Lowes, but this was a bad experience, and I get told one thing on the phone with reps and another by A&E.

I have a similar problem with my stainless steel Whirlpool bottom freezer refrigerator, model EB9FVHRWS01, purchased in May 2011 from Sears Canada. Exactly a year later, right after the warranty expired, I started getting ice forming on the floor under the bottom freezer. I have been cleaning it out on a weekly basis for the past just over a year. If I dont clean it out, then water seeps out onto the floor. I purchased an extended warranty for my new stove but didnt for my fridge.A co-worker had the exact same problem, with ice forming on the bottom freezer exactly a year later. He purchased the extended warranty and had the Sears repairman come in and replace a $50 part (box in back) ($150 labour). The repairman said this is a manufacturers defect in these fridges and theyve had many such cases. Apparently, the box in the back freezes up and water cant drain to where its supposed to go to be evaporated so it drips to the bottom of the freezer. I contacted Whirlpool and inquired, and they said there was no defect or noted problems with my model. Now Im contemplating whether or not I should spend the $200 and get the defective part replaced. Sigh.

This new Whirlpool washer hasnt worked from day one and the company wont do anything, they wont even answer me, I will never buy one again, all the same problems everyone else is having, Im just waiting for a lawsuit.

Have always bought Whirlpool appliances and never had a problem like this. Open the door on the top loading washer and its rusting out. I am having to buy a new one but considering other brands. No complaints about the matching Dryer.

I purchased my washer about 1 month ago and I used daily. I went away for the weekend, and now it does not work. Washer will not wash, fill or spin, gives a LF error. All lines have been checked. I need to call service.

Bought a new side-by-side in 7/2020 from Lowes in Keller, Texas. Salesman won me over with the buy American pitch claiming if the need ever arises for parts I would be far better off than with LG which orders their parts from South Korea. I bit, and bought, and now regret. The refrigerator dispenses water randomly and I must keep a glass under the dispenser all the time and empty it when it gets full. Under warranty they say! Well here it is September and after being on hold for an hour each time (6 times as of today) I attempt to get help they tell me that the part W11293378 is not available and will not be made until after this month? BEWARE this brand. This is a poorly ran company and buyers would be better served to look elsewhere.

Tried to do a small 2x3 bathroom rug and the spin was thrown off kilter. I have been doing laundry a long time and I know how to evenly distribute clothes etc so the washer should be able to handle it for the price I paid. The high end front loading Whirlpool set.

I just bought a new home, and it came with what was described as top of the line Whirlpool appliances. The Cabrio toploading washer worked for two loads then just stopped. After arguing with Customer Service for a while (They insisted this must be an installation error.), I talked with the builders. They gave me a different customer service number. My second call got me a repair appointment, during which the repairman discovered that the pump was in fact dead. Because this is a new model, they didnt have a replacement on hand. So, I will have to wait an additional week and a half before the part is installed. This is a product that retails for around $1000, and it lasted less than one day. My last washer cost $400 and was still running fine when I sold it after 10 years. I can already see the handwriting on the wall. After my warranty is up, I will have to replace this hunk of junk with something that has some reliability.

This washing machine has been the worst machine I have ever owned - I have called Paddys Market on several occasions to have a repairman come out and take a look at this machine, which they did - but the machine never got any better - it has never ever washed my clothes properly its a piece of garbage - clothes come out dirtier than when they went in and sometimes come out dry. Its so busy trying to save water - it doesnt use hardly any - and forget doing bigger loads - I WILL NEVER BUY ANOTHER WHIRLPOOL product again.

My mom got me and my children a new fridge side-by-side ice maker. We were hoping that since it was new, we would have it for a while, but 1 year and 1 month later, it is not making ice and changes temp for no reason. My fridge will, most of the time, keep cold; but then, there are those days that it doesnt. No one touched the temp, and since its been more than a year, Im stuck. How wonderful to spend all that money for a year and one month! We dont have a working ice maker, and also, I cant keep food good. I cant afford to throw food away. And my mom and I cant afford to get another one.

My stove fits my needs as I’m looking to simplify my life and not have a behemoth with books and crannies to scrub and clean or polish. I’m looking to cook less, not more and this stove fits the bill just fine.

Purchased WRF989SDAM00 French Door refrigerator in 2013, and 33 months later it is not cooling (fridge 45/freezer 36 degrees). Service call diagnosis is a leak in the sealed component area. Since it out of the 1 year warranty period, nothing is covered. This is the first of Whirlpools dual evaporator models, and is technically challenging according to the service technician. Most likely one or both evaporators are defective, and this type of failure comes with a recommendation to change out the compressor as well as it is moisture compromised.As my previous Kitchen Aids had 10 year sealed component warranties, and the Whirlpool is the same base mechanism as the Kitchen Aid, I contacted Whirlpool to see if they would extend my warranty coverage to these sealed components. Website submission - never got an answer. Called the customer service line - they politely told me they were sorry but there is nothing they can offer me. Even the extended service plan would not cover me as this refrigerator has a preexisting problem and it must be 100% operational to begin an extended service contract.Im extremely disappointed in this fridge only lasting 33 months, in comparison to my previous Whirlpool/Kitchen Aid refrigerators. Of course the internet just allows me to see that Im not alone is purchasing a short lived appliance. So here is my contribution to the internet of things: Do not purchase Whirlpool refrigerators expecting them to last much beyond the warranty period. Buyer beware.

I bought the most deluxe and expensive washer and dryer I have ever owned. It is a Whirlpool Cabrio. The clothes come out of the washer dry, and all tangled up. I bought it new from Sears on July 2009. Now only two years old, and the washer sounds like a jet plane. I paid a repairman $90.00 only to be told this is common in this machine. The repair is expensive, and I would be better off buying a new one! I owned a cheap, little GE washer, which cost me $300; ten years, and never had a problem. Now my dream machine turned out to be a piece of crap. I will never buy a Whirlpool again!

Paid between $800.00 and $1,000 (cant recall exactly) three years ago and the oven locked recently while cooking a pizza. Couldnt get the lock to disengage and the oven turned on self-clean mode without me doing anything. The pizza burned crispy before I finally got the door open. The failure code for the control panel showed up. I didnt buy the extended warranty because we only needed it to last 5 - 6 years until we do a full kitchen remodel and the really inexpensive (~ $250) oven that was installed by the previous owners to sell the house lasted six years with no trouble. Now we have to pay $391.00 to repair what I consider a brand new oven. In doing some research it looks like the control panel fail is common and is associated with using the self clean mode which we only used once. Great oven if you only need one for a few years and are willing to pay the price.

Bought this machine June 23, 2016. First use, I called Lowes where I purchased it to say there is something wrong as it makes a grinding noise. I was informed that is normal for agitatorless machines. I asked if he could hear the noise, and he said yes, thats it. So I disconnected thinking, Wow, who makes a machine in todays technology that is so loud you think something or someone is in serious pain?! Now am at the point where I want this design in pain out of my house! Going to Lowes today to try and talk rationally for a complete refund so I can purchase an LG or Samsung which is what I should have done originally.

When the fridge is running and there is a power loss of about a second or so, the fridge shuts down and will not restart (even after hours). I have to unplug it for a minute or so then plug it back in; it runs fine until the next very short power failure. When we are out of town for a few days and that happens, we come home to a fridge of ruined food and a mess. I have contacted Whirlpool (2 times) and they were no help at all. It seems to me a software change could solve the problem, but they are unwilling to listen.

This stove was in my house when I bought it. It has a glass top on it with marks for each type of burner below. There are a couple of different size burners which makes it very useful. The only problem is with the glass top feature. It gets marked easily even when you try to be careful and many of the marks will not come off with anything I have used. The marks are so prevalent that I would never buy another one.

This Whirlpool fits in a 1962 brick split level kitchen perfectly. It is both beautiful and runs as hoped. It has a bottom freezer, allowing the top portion to hold a full Thanksgiving and Christmas turkey platter. I love this Whirlpool. It is also made in America!

Whirlpool Refrigerator model #GI6FARXXY0 - Bought this refrigerator at Las Vegas Store #3305 Home Depot, 12/07/2012. July 2014, the ice maker stops working. I replace it with another Whirlpool ice maker and that one stops and leaks water from the dispenser all over my floor. Im on my 3rd ice maker and its not working! I have no warranty but still...a refrigerator should last longer than this at these prices. Im trying to research problems with this refrigerator and it looks like now the refrigerator model has been discontinued! Cant find anything on it. I paid close to $1,800.00 and it lasted 1 year 1/2? Its turning into a money pit. My question is... after looking at all of the complaints concerning ice makers and water leaks on Whirlpool refrigerators... why hasnt Whirlpool addressed this problem with a recall?? Obviously, these ice makers are faulty even the ones you replace them with. The repairman told me there are no warranties and they would not take returns on them. Whirlpool knows there is a problem and doesnt address it. Consumers should be protected from businesses that know of problems and refuse to take care of them with customers. They are still selling faulty Whirlpool ice makers??? I paid extra to have a working ice maker and expected it to last more than a year and half for the price of this French Door, bottom freezer, refrigerator did. The doors look terrible as they do not clean nicely and leave streaks. From the looks of some of these complaints, this may only be a beginning of problems with this appliance. Totally disappointed in this product. I know I wont be looking at any more Whirlpool products. Im disgusted with their faulty products and no accountability. If theres a recall, count me in!

Frontload Sport Duet ht: After just 8 years, bearing out on washing machine. Just had repairman out. Cost more to fix than what I purchased it for. I bought both the washer and dryer, thus the reason for the duet. So now I have a good dryer and lost its mate. I am not going to purchase another one. Very disappointed. I will not be purchasing any more Whirlpool products in the future. Off to the laundromat.

In August of 2013 the lid on my Whirlpool Cabrio, model #WTW7800XW0 simply fell apart. This washer was purchased from Lowe’s in Live Oak, Florida on August 23, 2010. Lowe’s put me in contact with the authorized repair service, A&E Factory Service. The A&E technician arrived and told me the hinges were the cause of the lid breaking apart. He ordered a new lid and new hinges. When the lid and hinges were delivered the technician came back to my home and looked at the hinges again and said they didnt look that bad so he didnt bother even opening the box with the new hinges. He just put the new lid on and said I shouldnt have any further problem. The total cost of the new lid, hinges and service call amounted to $385.50. Well, here it is - not even a year later and the same problem is back with me. Yesterday (July 23, 2014) I was doing a load of laundry. When the load was complete and the lid lock turned off - the lid actually sprung upward and now the lid wont close. It seems that Whirlpool is fully aware they either have a design flaw of defective lids and they are gouging the customers for their errors. The Cabrio model is supposed to be top of the line - certainly not a cheap machine. I was, at least, happy with the performance of this machine cleaning my clothes properly but this lid problem is ridiculous. I do not plan to purchase any Whirlpool products in the future if they do not make things right by myself and hundreds of others with this same problem.

I rent a condo unit and hardly use the microwave. It is nice to have. Never had one over the stove and it came with the unit, so I gave mine away. After living here for 3 years I am now moving to another city 5 hours away. I noticed the other day when I went to melt butter for popcorn, the door crack, which I noticed the second year we lived here, has gotten worse. Not just worse, but the handle looks like one pull and its completely broken. My landlord expects us to pay for this. I am reading and I see that its from the heat from the stove, which is also a Whirlpool product, is to blame, not the user. How is this right, how is this fair?? When we move we will have to buy a new microwave, that will sit once again on my beautiful microwave cabinet and I promise, it WILL NOT be a Whirlpool!!!

Very reliable. Handle large large loads of laundry. Do not have to prewash any clothes. I will always use this brand.. My parents used this brand while I was growing up. There is no other brand I will use. Thank you Whirlpool!

Never again will I purchase any Whirlpool product. I was seduced into purchasing a Whirlpool dehumidifier by the sale price at Canadian Tire. Big mistake! It worked as expected for four months before all the refrigerant leaked out - we found this out later. I contacted Whirlpool and was told I could take it to their authorized service depot (a 50 minute drive from here) for repairs. I did so and was charged $44.80 for them to troubleshoot the unit. Two weeks later they told me that the refrigerant had leaked out and it would cost $563 for repairs. For a $200 unit!! Get serious! I pointed out, according to my Canadian Tire receipt that the warranty was for 5 years on the compressor and sealed components. After further collaboration between the repair depot and Whirlpool, I was told that my warranty is not with Whirlpool but rather with the company that produced the unit for Whirlpool, namely Hisense and that the Whirlpool repair depot did not do warranty work for Hisense. I then had to fax the technician report to Hisense to get an authorization number for a replacement unit from Canadian Tire. Once armed with the authorization number, I had to visit my local Canadian Tire store and pick up the replacement. That unit worked well for about nine months before it failed. Considering service depot charges and all the driving involved, it cost me something like $100 for a warranty replacement (not including my time). No more fooling around with this junk. I just ordered a Kenmore dehumidifier. Hope that one is a better investment. I see now that Canadian Tire no longer sells these units. Maybe they figured it out. Judging from other Whirlpool reviews, it seems I am not alone in my views. My recommendation - stay away from Whirlpool!

We had purchased a Whirlpool Duet Sport Washer and Dryer in 2007. Since that time we have had several repairs on the dryer, resulting in us having to purchase an entire new unit in 2011 (4 years old), along with mold that has accumulated in the washing machine on the tub and rubber seal that cannot be removed after several attempts utilizing several products that were recommended. The end result is our laundry that has been washed - comes out with a musty odor. Not happy at all with the top of the line, best possible machine to produce clean laundry as was sold to us! This has been a nightmare, and a totally dysfunctional appliance that should have lasted longer than 5 years!

We just purchased a new fridge - September 2021 -- Whirlpool side by side. Why is just okay? It is a loud refrigerator. A roaring sound is pretty constant. The ice tray in the door has no recessed tray ... so water and melting ice just follow down the front of the door and onto the floor. Two days after purchase we went back to Lowes to return this fridge ... but all the other refrigerators do not have a recessed ice tray. And since they are not plugged in ... who knows if they roar.

I bought a new home from DR Horton with Whirlpool appliances. All of the kitchen appliances were Whirlpool which came with a 1 year warranty. After closing on the house and getting in, started the dishwasher for the first time, it started leaking water instantly from the bottom of the unit and spilled all over the floor. Tried to contact the builder/inspector who asked us to contact Whirlpool. Called Whirlpool and I was kept on hold for over an hour before someone answered. The rep was so adamant talking all unrelated things and said that she cannot do anything for another 15 days. After escalating to the supervisor, it was the same response. The service at customer care is so bad with no fix in sight. I am not sure what they are going to do with the appliance and not sure whether they come and fix it or keep me waiting. Very unethical, the way they talk to the customers.

Whirlpool cabrio washing machine is 3 years old and the bottom leaks heavy bearing oil everywhere. I now see it is a common complaint and the seal was incorrectly installed by the manufacturing plant. They should be forced to offer a recall and they should stand behind their product. I will never buy whirlpool again. I see thousands of complaints online.

My Whirlpool oven (Model WFG505M0BS0) stopped working - the bottom oven part (the top burners were OK), the display on top functioned normally, but no fire came on. I called Whirlpool, and then I accessed Whirlpool online and scheduled service with their official service representative - Flamingo Appliance Service ** for September 9, 2020. When the repairman arrived on 09-09-2020, he opened up the stove and checked it, and he told me that a computer part needs to be replaced, as well as the igniter, and the cost would be between $400.00 and $600.00 (I dont remember the exact amount), I told SEVERAL times, maybe its just the igniter (for which the cost would less than $100.00 AND already included in the $134.95), but he insisted that the computer needed to be replaced, I did not like the way he explained it to me, it did not make sense.After that I was planning to buy a new stove, as the repair was too high. But, I decided to try to change the igniter myself before getting rid of the stove (the igniter cost was $21.00). I just got the igniter recently, and installed it, with help from YouTube, and what do you? THE STOVE IS WORKING!!! This is fraud!!! FLAMINGO APPLIANCE SERVICE ARE THIEVES, AND BY ASSOCIATION, WHIRLPOOL, WHOM THEY REPRESENT ARE THIEVES ALSO. I shall publicize to the best of my abilities: NOT TO BUY WHIRLPOOL PRODUCTS!!! This was not a mistake!!! This is the way they rip people off!! Either by paying exorbitant amounts for unnecessary repairs, or by buying new appliances when the old ones are still good. Dont buy Whirlpool!!! Dont use Flamingo Appliance Service. Theyre both fraudsters.

My wife and I bought a Whirlpool Cabrio washer and dryer set in 2011 and now the washer has an error code of F7 E5. I spoke with an appliance guy and he says that it is going to cost up to $450 to repair it. The wash cycle does nothing, it just sits there and then it goes to the next cycle. I have grown up in a household that had washing machines that lasted many years. This is a joke. Why am I having to buy a new washer in 3 years? I dont understand. Whirlpool knows that this is a problem and they should step up and do a recall or some kind of discount towards a new machine. This is ridiculous.

Whirlpool microwave 1163XVS - I purchased a new home and a Whirlpool microwave in May 2010. The microwave has all of a sudden stopped heating! Turns on, spins, counts down, lights up, etc., but will not heat. Found this site by trying on my own to detect a possible reason and Im shocked to see these many complaints of the exact problem. Unbelievable, should be class action suit maybe for continuing to take money from consumers for defective product that Whirlpool knows about and appears to not take responsibility. Ive read enough, not even going to call for repair. Im buying another brand and spending more wisely this time. Thanks for the heads up. Shame on Whirlpool.

This has been our second Whirlpool Hot Water Tank in our home in the past 14 years. The first was installed by the builder, when it went out we purchased a larger capacity one from Lowes. It was professionally installed and now, after the extended warranty coverage period is expired, its expired as well. I would think you should be able to get more than 7 years out of not one, but two Whirlpool hot water tanks. No wonder they are no longer manufacturing hot water tanks - they sucked at it. Also, if you do have one, you have to get parts from Whirlpool and pay $30 shipping. No thanks, for the cost of parts to replace everything youre better off getting a whole new unit.

I have had 6 months of absolute HELL working with Whirlpool. I mistakenly purchased a Whirlpool Refrigerator from Home Depot and the moment I did Home Depot were hands off. Sadly my brand new refrigerator didnt work from the moment it arrived. The ice machine was dripping inside from the back making all the ice freeze together and created an ice sheet below the ice box that can be taken out. There also was water dripping out of the ice output. The water output wasnt working and the water was literally trickling out when you pushed for water.SO Whirlpool took 6 weeks to send their 1st technician from L.A.R Services out of Boston and the guy turned up and said it was due to needing a new ice tray/machine and our sink having an old filter. There was NO filter on the sink! And he then ordered an ice machine that arrived at their office in 4 weeks but they took 3 weeks to try to deliver it. When they finally came out they called to say they had to turn around because the road was blocked- there are 3 ways to get to our home....so I had to chase for 2 more weeks to get them to come back out. When they arrived they handed me the ice tray outside and drove off!!!SO WE TRIED AGAIN and this time had Home Depot call Whirlpool to get a service person in to fix it. We had to wait another 5 weeks and when he finally came he claimed our issue was due to the fridge not being perfectly level. Well, guess what, its now level and the ice is still freezing into giant blocks, some weird plastic strap is hanging inside the ice box and the water is still trickling out.Ive called the service guy 3 times and he is yet to call back and right now Im on hold with Whirlpool (its been 14 mins so far). NEVER AGAIN will I buy anything WHIRLPOOL and I will be sharing this experience in every consumer space possible so no one has to go through what we have. Our new fridge is still broken after 6 months!! All I want is my GE fridge again and I should have a followed the reviews.

We purchased this one (Wall Mount Model # WMH76719CS) on July 30, 2015. About one month ago I started noticing that a simple large cup of water to make tea or instant coffee takes more than 2 minutes on power 10 to heat up enough. It used to take about 1 1/2 minutes. Now, Im no mathematician, but I believe thats about 25% power loss in 6 months. The same applied to any convection dinner Ive tried to cook lately. Im going to say that Im dissatisfied with the convection feature and would rather just bake the silly food in the regular oven as usual. Any planned-overs trying to re-heat is taking much longer as well as melting butter. I do not have much confidence in Whirlpool microwaves right now, and may never again.

After owning the highly recommended Cabrio for only 2 years, I was told it would cost $300 for the motherboard!! I have always used Whirlpool but this machine is terrible. Water saving is not an option when washing clothes. Unless I use the bulky cycle, my clothes come out dry and smell dirty.

I purchased a Whirlpool gas stove model #WFG540H0AH from Sears in March 2103. Since that time, the oven has repeatedly broken. After two major repairs, the repair company said the fas venue (?) suspect board was defective and needed to be replaced by the manufacturer. After 3 weeks of back and forth calls with Whirlpool customer service, the only solution they provided was for me to purchase a new stove at a discount with no compensation for installation, the gas connection kit, or haul-away of the old appliance. The original stove cost me $1100 including the installation, haul-away and taxes. The replacement option would have cost me $800 and still did not included haul-away, the gas installation kit, or taxes. Hardly an affordable solution. Whirlpool at no time addressed that a part on the stove was deemed defective.

My Whirlpool range, was purchased 14 years ago. It was fine until 2 months ago. I was preparing a meal for a dinner party and the oven went from low baking into Clean mode. (This cant be done by accident, it is many step process to go into clean mode) Locking the door! When I realized what was happening I immediately turned the breaker off but we still could not open the range door. Since the oven had my potato casserole and my Teflon coated cookie sheets inside it started to emit a toxic smell choking all of us inside the house. The unit was too hot to touch so my husband and brother-in-law finally donned gloves and got the range outside. I called Whirlpool the next morning and got the run around as to what type of range it was Kenmore/Whirlpool. Whirlpool finally sent someone out to look at the range and their determination was it caught on fire and melted! The company will not do anything about the unit or all the damage it cause because the range is over 10 years old. But they did not tell me this until I had spent weeks getting estimates and gathering information for them. I TOLD THEM DURING THE INITIAL CALL THE RANGE WAS 14 YEARS OLD. I TOLD THEM THE EXACT DATE IT WAS PURCHASED. Whirlpool sent me a letter from their Claims Resolution Department saying my DISHWASHER will not be covered and misspelling my last name. I have tried to call the person ** at least 25 times and she never answers the phone, only get her voicemail. I just wanted to tell them I was a little concerned about their accuracy with the typing of the name and product..... How complete could the investigation have been if they didnt even get the product correct.The smoke/smell ruined my microwave and ceiling fan. We had to paint the ceiling, redo wallpaper and professionally clean all the carpets and drapes on my first floor (we had just remodeled our kitchen last May so this was an expensive redo not in the budget. Not to mention the cost of a new range). I will NEVER buy a Whirlpool again. And I want to spread the word about the possibility of your range having the same problem.