My 2-year old microwave and range handle(s) have paint peeling issues. GE has a program to replace the microwave handle. They DO NOT have one a similar program for the range (same paint peeling issue on the range handles/rings). They offer a discount cost for the range handles. I am sending them pictures and another formal complaint.

I like microwaves to a point. If my wife puts my dinner the refrigerator and I take it out and put it into the microwave if the dinner has let’s say pork chops, mashed potatoes, peas everything gets cooked except the mashed potatoes. They’re always cold and sometimes the peas will pop. There’s never a good medium for all foods at once and if you have any bread or biscuits you have to take it out after 15 seconds. The same goes with turkey cranberry stuffing and other things that go on the plate at Thanksgiving. Some stuff gets very hot. Some stuff stays cold.

I have a 2011 GE Model # JES1456BJ05 microwave and it has been gently used and kept clean. Upon cleaning today I noticed that the top of the inside is blistering and peeling off. Surely this is not safe as it could fall into food, plus they should make them to stand heat, after all this is why they are made for heating things. I called GE who informed me that there is no recall on them so I am pretty much stuck to go out to buy a new one with no help from them. I now read that this has happened to people before. Lesson learned never purchase a GE microwave as they do not stand behind their products when a manufacturing problem develops if you are the first one to call, and beware and ready to buy a new one every 2-3 years. This is all they are made to last!!!!!

We have a GE Profile Microwave (PNM1871SM3SS) that is only 3 years old and is reporting KEYPAD SHORTED - SERVICE MAY BE REQUIRED. We called GE service repair and told them the exact message. The service guy shows up and says all he has in his order is General other service needed and that he doesnt have the keypad panel. Gives us an estimate of $501 to repair it. Tells us a new one costs $400 and with a coupon he can give us it will be $100 less. We were charged $99 for this visit which basically lasted 10 minutes (way to go GE on making money off faulty devices you sell). The service-person also told us that the average life was 10 years for these, but this one crapped out in 3. He said if we get another GE microwave, it will fit right in there and that I can do it myself if I am handy but after reading all the reviews online, I am skeptical whether I should get a GE microwave again or not!

We bought the GE dishwasher from Lowes 3 years ago and have had it serviced 3 times! The water pump went the first year and now the drain pump! Love the coloring Slate but very poor quality. Will not purchase GE products again.

I purchased a GE Cafe Over-the-Range Microwave along with a GE Range. It was delivered on Nov 2009. The control panel started acting up and quit working altogether in May 2011. I called GE and found that the replacement part and repair was almost as much as I paid for the microwave. After talking to several people and making my case, I was told they would give me a discount on replacing my unit. I was to look at microwaves and let them know which one I wanted. I have left several messages and no one at GE will return a call.

Bought GE range microwave JVM3160DF3BB11/16 from Lowes. Tripped the breaker. Replaced the breaker with a new. Would immediately trip the breaker as soon as you pushed the start button. Last time it tripped the breaker oven went dead. Wont even light up. Junk. Do not buy made by Haier in China with the GE name on it.

It works well. We like this newer GE Profile with many preset buttons such as for different times and food types, and defrost. The last GE Profile MW we got had a knob that got loose right away and hard to use, like a dial-up AOL, so this upgraded model is much more convenient. I like the bigger plate size, and that the turntable can be turned off if we put a rectangular casserole dish in there.

We have a GE PROFILE dishwasher that has served us well for several years. Tonight, however, while it was doing the dishes the main circuit board caught fire. After turning the power off and trying to blow out the flame, we opened the door cover to find the main circuit board still smoldering. One of the relays on the circuit board had caught fire and started to burn through the circuit board melting it, the plastic cover and the wire harnesses. We were lucky to be home and awake when this happened and were able to take care of it. If we had been gone or asleep we probably would have lost our home!

This is a work horse of a machine. I have been using it for 12+ years. Not my first choice, but it was here when I moved in. Still going strong. So why change now, when its doing its job. My first dishwasher choice would have been a Bosch, because they are so quiet.

We have a full size counter top GE microwave. It is about 3 years old and there have been no problems. Our last microwave was also a GE and it lasted about 15 years before it started to suffer from occasional electrical arcing inside, while in use. We simply stopped using it and after reviewing all models, chose to buy another GE and it has been great. We have an over the range micro at our summer home - a Frigidaire and not as good. Our research shows it will likely fail long before the GE.

I owned this microwave for the last 5 years. Easy to installed, good appearance, stainless steel, easy to operate but fancy enough to prepare different meals to include the younger ones. Lighting very good and vent excellent.

I purchased this dishwasher on April 2018 and from the beginning was not working well. I called a technician about 2 months ago, came with the computer and told me it is working fine, but my dishes are never well cleaned. Anyway on Nov 27, 2018 the water started coming out from my tiles and I didnt understand why? I kept drying and it kept dripping. I was so worried and called a handyman. He told me it is the dishwasher dripping water. All my cabinets, my tiles are wet inside. I have called and report it and today a technician was coming to repair it (which I will not accept.) I want a peace of mind. I need a new working dishwasher. Today, the technician was supposed to call me before arriving and I was 5 minutes away and left. Now, your customer service reps are telling me to wait till Tuesday. I am having guests and my house is a mess, I have the dishwasher in the middle of my kitchen, everything is stinking to humidity and all happens because of this BAD PRODUCT. I want this trash to be exchange as soon as possible.

My 3 year old $600 GE micro caught on fire with nothing it. I set the timer on my top of the line GE microwave for a reminder. Nothing in the micro, cooking nothing! When I came back it was on fire! Melted the inside. If I would not of been there it would of burnt my house down! The only way to shut it off and put out the fire was to turn off the power to it. The next day as soon as I turned the power on my GE microwave started on fire again!!! This must be happing to many people and needs to be addressed by GE! This company needs to be held accountable for burning houses down!

The new home that we purchased had the above named dishwasher (GDT655SSJSS). When I run the dishwasher there is a very high frequency whine throughout the cycle - the only time it stops is when it is changing cycles. I have contacted GE Customer service 3 times... The first time I was told to add a quart of water to the bottom of the dishwasher and that should fix the problem. Tried that - still high frequency whine. Second contact - no response. Third contact - today- called customer service after my negative appliance review was rejected by GE (buyer beware of all those positive reviews) and was told that this noise is normal. Totally Unacceptable - since the sound hurts my ears and causes a headache - I have to listen to 111 minutes of this noise (except when the washer pauses to change cycles). This is the very worst dishwasher I have ever owned and even though it is only 2 months old I will be replacing it - and it wont be a GE Dishwasher.

Lousy and wont clean dishes. $1,000 down the drain.

When the handle on my expensive replacement (GE Profile for GE Profile) microwave/convection oven peeled, we called our retailer (PC Richards is really good about service). A new door showed up and it, too, has a plastic handle. The difference is, this time its solid grey plastic as opposed to white plastic with silver paint. Seems to me that an expensive SS appliance should have an SS handle. Too heavy? Just use a tube of SS - not solid. Too hot if above burners? Didnt my last GE Profile micro/convection have a SS handle? I spoke with customer relations. The person was well trained not to say anything that might suggest she agreed with me. Since the issue is cosmetic and not functional, I have to consider the issue dealt with now that the door has been replaced. I told them I will do my best to publicize this issue and that I will never again purchase a GE appliance. I also called CEO Jeff Immelts office in Connecticut. I made it clear that my dissatisfaction has cost them a long time, loyal customer and that I would spread the word. I would appreciate if anyone agrees with GE that a SS handle would be too hot over stove burners.

My dishwasher does an excellent job - its a bit slow, but it gets the job done reliably. It is probably slow only because its old and somewhat tired...It does a great job cleaning off remains on dishes, which is not always the case. It doesnt fail me.

The GE microwave model CJES1290Ml01 does not get used much, maybe 15 minutes per week. I have not even used convection oven or broiler part, so we could say very gently used. Sparks and grinding noise out of the magnetron tube area started recently and there is no metal in the microwave. It arcs like there is metal. There are not enough miles on this equipment to need replacement, but it is too expensive to fix. Im not happy with Walmart GE product. Did they cheap it up?

July 4th, 2010 - GE Profile Dishwasher, Model: PDW9200N00BB, Dishwasher had been humming after cycle was over for a little while, this night I walk into the kitchen late and find it full of smoke. Circuit board has a hole burned though it and wiring harness is melted. Never tripped any safety, could close the door and it would come right back on, smoke and all. This model was not on the recall list but I called GE anyway. After describing the fire they send someone out, then they send a new dishwasher out and install it. I assume they wanted the old one to look over or just to get rid of it. New washer installed the end of July 2010, new model number PDWT500R10BB. Today is 2012-02-02 and the new machine would not stop at end of cycle (Got down to 1 minute and stay there for at least 20 minutes before we turned it off). This machine is now making the continuous hum after the cycle stops that the old one did before it caught on fire.Called GE, they said they could maybe go half on parts and service until they checked where I was located. (Wichita, KS. Area population 500,000+) They said that they didnt send factory techs to my area and I would need to contact a local repair service. I pointed out that they had a factory guy for when my machine was on fire and they said it was just a malfunction now, so they could not. No half on the price for repair either at this point. This is a $1100 to $1200 dishwasher with, as near as I can tell from complaints online, a history of going up in flames. I understand things break etc, but when you continue to put out products like this and then refuse to remedy the problem, I and anyone who will listened to me will never own anything GE again.

Used the dishwasher for 1.5 years (it worked fine), but then the heated dry stopped working (only 1 year warranty). $500 for diagnosis and repair versus $700 for a new dishwasher. Guess I’ll be getting a different brand going forward.

I do not remember what I paid for this microwave, but my budget was low, and the value I got is good for the money. Ive never had any trouble with this oven, and its 5 years old. Its a good size and cooks evenly.

Model # JVM1752SP2SS - I have had my microwave for 5 years. Last night, my husband and I started smelling burning rubber. That lasted about 20-25 minutes. Then my husband heard a strange sound coming from the kitchen. When he went to investigate, he found our microwave on fire.

Our GE microwave is used primarily for heating things though sometimes something is actually cooked in it. It is a useful tool and saves time and labor. I would rather have one than not.

We purchased this new 8 years ago however the problems started after about two and a half years of use. I called GE when the paint started peeling off of the door of the microwave. They asked me if I cooked salty foods. I cook bacon in the microwave. They told me my only option was to buy a new door and have it installed. It was $250 at the time. I did not have the money or desire to fool with it. I continued to use the microwave and it has continued to degrade. Now eight years later there is so much metal showing that we decided we must do something. It is unsightly and very difficult to clean because its rusting. Ive been expecting electrical arcs to occur and the microwave to catch on fire. It hasnt done that. It has continued to cook the food. The entire metal area on the door is without paint. There are other large areas of metal and rust inside on the bottom of the microwave. The entire vent panel is without paint and rusted. We also had to have the control panel replaced twice. It was covered once under the warranty and once it was not. We also had to replace the element in the oven which is used rarely. To replace the microwave and oven combination now would be $3,500. When I do replace it I will replace it with a different brand.

It has been a remarkable machine: reliable and efficient! I have had my General Electric microwave since 2001. It has never given me one day of trouble. The size is perfect and the heating mechanism has been flawless.

Of course, I rinse my dishes, but Ive had few incidences of dishes coming out dirty. Hot start, start (long wash), short wash, rinse only and plate warmer. The interior is set up well with a good variety of spaces. I would say its a normal-sized household dishwasher, not compact, with approximately a 24 width, 24 depth and height. White with gray lettering; four buttons and one dial. Simple design that is easy to understand and operate. The run-time of this dishwasher is quite long, and it is very loud.

GE dishwasher caught fire - not part of recall. I arrived home for lunch to find smoke alarm going off and kitchen hot and hazy. Determined it was dishwasher and opened to thick black smoke pouring out. Heat so extreme cups/dishes and racks and spinning thing on bottom had melted and adhered to elements, each other and bottom. Parts of the dishwasher itself are warped (steel!). Granite countertops too hot to touch and wood cabinetry surrounding it darkened. Dont know the extent of that damage yet. Thank GOD I came home for lunch- I normally do not. I truly believe our house would have been on fire.

I own a GE counter-top sensor microwave oven model #JES1451, which was only 2 years old. At 3:00AM, I woke to a room full of smoke and a burning plastic smell. I immediately rushed to the source which was my microwave oven. It was going by itself and the panel read sensor error with smoke billowing out of it and flames erupting. Luckily, I had a fire extinguisher handy. I had never had any problems with this microwave prior to this experience. I cringe at the thought of what could have happened to my home and my family sleeping upstairs if I hadnt been nearby.

If you have a choice, run away from GE like the plague, because if you have to make a warranty claim, it may become a nightmare. I purchased a new home May of 2015, and my wife and I paid for the appliance upgrade to the GE Profile, which werent cheap. Less than 2 months I noticed that the microwave had a burn spot on the bottom of the door where it sits against the exterior of the microwave, the paint was burnt from the metal, and the rubber seal melted. I did not think too much of it because the microwave still worked and unless you opened it you did not see it, so it wasnt so much of an eye sore. Fast forward to January 2016, my wife informed me that the microwave stopped heating, and that she was going to put a ticket in to New Home Warranty, I informed her that we probably need to go to GE directly as I knew that is what they were going to say. So I called GE and put in a Service ticket. They informed me that it was going to be a little over a week before anyone would be available to come look at it, to which I was OK with. The repair guy finally came. I explained to him in detail what the issues were. He opened the microwave, closed it back, wrote some things on his computer, and told me that he ordered a part called the magnetron tube, which sounded like something from the transformers. He told me it would be a week before the part would be ordered, so I asked him if it wouldnt be easier for them to just replace the microwave. He told me that it is a warranty repair and they have to try and fix it first and if not, then they will. The evening before the repair guy was supposed to show up to change the door and the magnetron tube, I got a voicemail stating that the part will not be received until the evening of the repair, so they rescheduled me for 2 days later. GE just assumed that I would be available, because I probably sit at home all day waiting for service repairs. I called back the number to see what was going on. I was adamant that they replace the microwave, because by this time it was already 3 weeks without a microwave. And with small kids in the house it was very annoying to have to put a pot on the stove every time you needed to heat anything. After 45 minutes, I was still nowhere with them, so I ended up sticking with their new appointment window. I was leaving for work 2 days later when I noticed the repair guy at another home in the community. I thought to myself why couldnt he have done our repair the same day if he were already going to be in the neighborhood? About 45 minutes later my wife called me and told me that the repair guy showed up to repair the unit, that they were supposed to repair a day later, only to be told that the damage on the door was caused by arching, and that it will happen again so the microwave is non-repairable, so they will have to replace it. He told my wife that she will be receiving a call from the warehouse within 24 hours to schedule the replacement once the microwave is available, but she could call the warranty repair department to see if they could expedite it. After another 25 minutes on the phone going back and forth we were told that it will be about 7-10 business days before the microwave may be available. Now it is good to note that the warehouse where they stock the product is only 2 hours away from where I live. So by the count of it by the time we receive a new microwave, it would have been about 5 to 6 weeks from the initial call to get the issue taken care of.

We purchased a kitchen full of GE Cafe appliances with our new home two years ago and yesterday the handle to the door came off in my hand. This is an $1100 microwave that is two years old. GE wants to sell me a new door for over $200. It just seems a little underhanded that we buy high-end appliances thinking we are getting a good product. My mother has a microwave the cost less than $100 at Walmart, its six or seven years old and has never had any issues! Show how much they can overcharge us for cheap merchandise and get away with it!

After writing my review I was in the process of ordering parts for my dishwasher. I had a representative of GE in the parts department connect me to a GE manager. He was very helpful and understanding of the situation and helped resolve the issue with my dishwasher. My issue was with a customer service representative in the recall center when I inquired about anyone else having issues with their dishwasher and if there was a recall on the machine I purchased. Since I did not have an extended warranty the person I was talking to was extremely rude and would not answer any questions or concerns I had with the machine. I was not pleased with the customer service reps attitude and her ability to deal with the public.

I was sitting on my couch and I heard something running. I walked into the kitchen and saw my GE Profile microwave was running. At first I doubted myself and thought maybe I did something and then I cleared it out and went and sat back down. It did it again and again several more time. This is very scary. It was running like someone had set it and it was getting hot inside. Im not sure what else to do. The last time I had the same type of problem and just bought a replacement microwave and now this one is doing the same.

I have a 15 year old washer/dryer set that has worked consistently and it resides at a rental property. I purchased GE washer/dryer set for primary home 4 years ago and it's awesome. It's the level 1-2 steps above basic model and has enough settings to fit my needs (maybe more than I even use) such as pre-soaking, 4 settings for loads and much more. I would not purchase anything besides GE appliances. Very reliable and easy to interface with.

I purchased this GE Adora dishwasher about 3 years ago from Home Depot and it cost about $550 which I think should translate into a well made dishwasher. I only run it about twice a week so it gets low use. On inspection this month I noticed the racks were already starting to rust and that there was a tear in the door gasket. I called the 800 number for GE consumers and they told me they could order me the racks for $200 a piece and that they would send out a repairman for $139 plus the $40 part. This is more than the dishwasher cost. They also told me I should have purchased the extended warranty and that this particular dishwasher has only a one year warranty. What happened to GE? My family has GE refrigerators for years without an issue and my dishwasher is already exhibiting problems after 3 years.

This is one hell of a dish washing machine. You really need to think about getting in on this thing at the ground level. You put the dishes in dirty and they come clean! Holy**!

Ive used this GE model JES2051DN1BB (manufacturer date August 2008) microwave for ten years now and impressed that it is still working perfectly cause you dont see that much anymore. I usually prefer Maytag products cause my GE washer and dryer did not last for me, but this has seem to be different. Maybe GE should stick to making microwave ovens instead of anything else.

We bought a suite of Slate GE appliances during kitchen remodel 2 years ago. Weve had the dishwasher, model GDT580SMF2ES, motor replaced twice now and it is still loud and stops intermittently. Thank goodness we have the extended warranty! The over stove microwave is now starting to run when we just shut the door and stops intermittently. Were ready to replace everything with a reliable brand and cut our losses. We will never buy GE again.

The flat, firm-press keypad for microwaves just seems dated. Often they get worn out. However, all in all, it does what a microwave is supposed to do and does so efficiently. It’s not the most attractive microwave though.

I have had the GE Unitized washer dryer for 4 months with no problems. It has the cycle choices I need for washer and dryer. It's easy to load and remove clothes, even if the washer tub is a little deep. It washes bulky comforters, coats, heavy denim, bathroom rugs just fine. The dryer is big and quiet. It works like a HE but uses all types of detergent. Great buy! Gave 4 stars for function only because all models do not have a "rinse only" choice.

Last summer GE replaced the peeling handle on my microwave oven. I have treated the new handle with kid gloves. No abrasive cleaning products have been used and the oven burner under the handle is used infrequently at very lower temperatures. One year later its peeling AGAIN. All the burner control bezels on my GE Cafe oven have also peeled. The handles look like plastic covered with aluminium foil. Cant believe GE hasnt fixed this problem or issued a recall. I will NEVER purchase another products made by GE!

My dishwasher is a GE Profile. It is as quiet as a Bosch we had in another home we had but it must cost half as much. We have it 8 years now- no problems. Never had a service call or anything wrong with it. It owes us nothing.

GE Profile dishwasher washes dishes, pots, and cutlery well. Nice capacity. Also has an antibacterial cycle which is handy when someone is sick. Doesnt have a grinder in the drain (which my KitchenAid had) so I rinse everything before I put it in the GE dishwasher.

I received a recall on my original wall oven with microwave unit, and was only going to receive financial help from GE, if I replaced it with the same unit model JTP90. The unit was only 3 years old at the time. I purchased the new model, which cost $1,200.00, and received a check from GE for $600.00 for the recall, which is already a rip off in my opinion. I had the new unit for 14 months, when the microwave stopped working completely, with no power whatsoever. I thought it had blown a fuse. I took it to the repair center, and they tell me the diode, capacitor, and fuse have all failed. $200 later, it can be fixed, but they have no idea why all three went out at the same time. I, however, do know, GE just makes junk! I will never purchase another GE appliance. Just a side note, my 3 year old dishwasher was also recalled, and it was $600 to replace it with the same model. They sent me a check for $300. It sounds like GE has a good thing going. Make a piece of junk and recall it a few years later, and only give the customer half of the cost to replace it, and only if they buy another GE product! Wow!

GE Stainless Steel Profile Dishwasher - My dishwasher is about 5 years old. Two years ago, we noticed that the gaskets, both around the tub and on the bottom of the door, were becoming gummy and rippling. We were hoping to make it another couple of years before buying a new dishwasher, but a couple of week ago, the top arm fell off because the gasket was so degraded. We ordered the appropriate parts and were only able to replace the top-arm gasket and the tub gasket. We had to call an authorized GE repairman, specifically RC Appliance in Sparks, NV. When he tried to get the gasket out, his hands turned black from the rubber. After about an hour of trying to get the new gasket installed, he had to use his pliers to crimp the gasket in place leaving large dents along the bottom edge of the door. He said the factory had crimped the old gasket in place at the factory from the other side. I am extremely unhappy about the workmanship and the fact that the gaskets did not last a reasonable time. I dont want to seek an attorney, but would rather GE contact me to discuss what must be done.

GE Profile Microwave JVM1850DMCC - For the third time in 5.5 years, Ive experienced a magnetron failure in a GE Profile Microwave. The first failure was fixed under warranty. The second was so bad, the microwave had to be replaced, but it was no longer under warranty. I should have heeded the warning and gone to another brand, but on 12/31/10, I paid over $500 to replace the microwave with a new GE Profile to match the existing appliances. Apparently this was a big mistake as the magnetron has failed yet again. The microwave is on its own separate 20A circuit, so that shouldnt be an issue. It would seem, however, based on the number of complaints I see on this site, there is something inherently wrong with the manufacture of these microwaves, or more specifically the magnetrons. Im extremely disgusted at this point.

A durable microwave. Our microwave has stood up to 13 years of pretty heavy use and all functions continue to perform as when new. Has turntable but would be nice if it had two shelves instead of one. Guess that has to do with the spacemaker size of this microwave.

Ive been battling this dishwasher since it arrived 9 years-ago. It was a warranty replacement we were stuck with from GE. Plus, we paid $300. We could never get it to clean dishes, no matter how we loaded it or what we used, so we gave up and hand washed dishes for years. This year, I am committed to getting the dishwasher working because of hand eczema. I took it apart and cleaned the sprayer arms, filter & wiped it down completely. I also ran a dishwasher cleaner through it. I finally got it to clean dishes, but only if they are thoroughly rinsed first and on the Pots/Pans setting. After a month, it stopped cleaning my dishes again. I took apart the dishwasher again, and cleaned everything. Now, glasses on the upper rack in the back are not all getting clean. I never overload it. Im convinced that GE Dishwashers are just junk. Someday, Id love to find a dishwasher that actually works. :-( Frustrated!!!

I bought a whole line of GE Monogram appliances for our home in late 2005. These appliances are not even seven years old and I have had the side-by-side fridge repaired several times with no true fix to the problem. They charged me to repair the tank in the fridge that the water line leads out from and into the freezer door. Another repair man said that was never the problem and that the seal on the freezer door is broken from inside the door (a common problem) and freezes up the water line, so no filtered water comes out. They wanted to charge me $800 for a new door with no guarantee that it won’t happen again!My cook-top downdraft has shorted out three times because of a faulty design issue. Water and moisture can get up under the switch, which shorts it out. There were three different repairs for the same issue. Last time the same service man repaired the problem and he was so careless. He got silicone all over the granite counters and switch, which he didnt check before leaving! I called him back to my house before he even got out of the neighborhood. Ultimately, he admitted he screwed up and ordered me yet another switch. Now, just today, my Monogram dishwasher started billowing black smoke. I called GE to find that the unit has been recalled for electrical shock and fires. They said I could have it repaired (if the service man deems it repairable) or it’s $400 towards a new unit. Is this company for real? How many consumers do they have to lose before they wake up? If I werent home my house could have burnt to the ground or, worse, one of our kids or us could have been severely hurt or worse. Do they not realize the liability they would have at that point if the worst would have happened? And they have two phone numbers and my address on file. Why on earth would they not contact me to tell me of the recall? Are they holding their breath and crossing their fingers that nothing too bad will happen? I have a Whirlpool fridge/freezer that is 18 years old and in my garage; nevertheless, it has never given me an ounce of trouble. I will never buy another GE appliance again and will tell anyone I know the same, including the several new home builders I work with. There are too many other companies out there that will back up their quality products. I have called into GE on my latest problems. And if I dont get satisfaction (i.e., brand new units), I have no issues contacting the attorney general. There are forms online that can be downloaded so a formal complaint can be filed. I urge anyone else to do the same.

Model #JVM1790SK01. High end GE Profile microwave/convection oven. Purchased and installed in 2009. First off the exhaust fan is terrible and is very noisy. The product itself worked well until recently when now the microwave heats intermittently, one time it will come on and heat, next time nothing. The fan runs, but no heating. The truly frustrating part is I need the front venting and no other units have the vents that blow the air outward, all the new units blow the air straight up your cabinets. Certainly a high end unit should last longer than 5 years with only two adults using it now and then. The cost of the service is outrageous and I surely would not use the $100 rebate on another GE product if they do not last any better than this one.

I have a 3 and a half year old GE Cafe Dishwasher which I paid over $1400 for and yesterday, when I ran it, I had a couple of cups melted when I opened it. This morning, I opened it to remove the remaining dishes. I closed the door to it and left for work. I did not run it again, just emptied it. My husband came home about an hour after I left to a house filled with smoke and the smell of melted plastic. He opened the dishwasher and found everything inside melted. The spinners, the silverware holder and all the plastic rack dividers were totally melted.Apparently, the heating element stuck on and overheated it. If he hadnt come home when he did, I believe our home would have caught fire. He said the whole kitchen was much hotter than the rest of the house. The service repair man said it cant be fixed because it got so hot it melted the seals in the motor. It was not a wiring problem with the house. It was a problem with the dishwasher itself. So now, I am out $1400 plus a house full of very toxic smelling smoke.

The WORST Customer Relations Department & GE Dishwasher EVER 1. Ordered dishwasher & Scheduled Delivery. 2. After my 4 hour window of waiting, I was called and informed the installation needed to be cancelled due to the installer calling in sick. 3. During installation, they dropped my dishwasher & dented the door. I rejected the dishwasher as my other one was already hauled out. 4. Due to my hectic work schedule, my dishwasher was installed about 2 weeks later. 5. Dishwasher was not cleaning. 6. Technician came out another week later and I was told it was MISSING parts from the manufacturing plant and should have never passed QC. In addition, It was missing the bottom spinner and the top spinner was snapped off. The technician glued it back on.7. Called Customer Relations to get the runaround saying, its not their fault it came from the manufacture missing parts.In closing, I own a large apartment complex and have many BUSINESS friends. I will NEVER buy a GE product EVER again and to think of all the people I know, Im going to share my horrid experience with everyone I know. This will make great conversation when golfing too.

Periodically my GE Profile Dishwasher will not clean well. On every occasion it is due to clogging of spray ports on the upper and/or lower spray arms. Removing the blockages is nigh-on impossible as it is often not possible to extract the blockage from the outside and its not at all possible to flush the blockage back down the arm to extract it at the centre. All that is required is a bit of forethought and the creation of some access to the arm. I was frankly surprised to not be able to find a replacement arm as the suggested solution to this problem, the additional part revenue being part of GEs the business model. There are a number of other design issues with the assembly at the bottom that make me think it was done by an intern and nobody checked her work at the end of summer break before it went into production.

I thought there were food particles between the glass plate and the ring. When I took out the plate, I saw that the paint had bubbled and was peeling off the bottom of the microwave. Extremely unhappy with this. Ive had hand-me-down off brand microwaves that lasted much long than this GE and with NO PROBLEMS until they just rolled over and died. I have all GE appliances in my kitchen and have to say that Ill never buy GE again. Electric stove is a problem, dishwasher a problem. Refrigerator was a problem (when it was new! it was fixed and thankfully is still running well).

We bought Cafe series appliances less than 4 years ago including dishwasher, fridge, stove and microwave. These are not cheap appliances. We also bought a service contract with them. When our dishwasher broke a couple of weeks before Thanksgiving, we called service to have it looked at. After 3 trips and over a month later the dishwasher is still not fixed. Each time we tried to make an appointment we were always given a date 1 week out and a 4 hour time window, but each time the technicians showed up late and once even 3 hours late despite the 4 hour window. The fact that after so many visits and part replacement the dishwasher is still broken says a lot about the quality of the product and its maintainability. All customer representatives work like zombies. The problem with GE lies within the culture. Nobody cares. The service contract is a total waste money.

GE continually shows us why they are failing as a company. In just this last year I have replaced a less than 5 year old GE microwave, three separates parts to my GE monogram refrigerator, and now this one and a half year old dishwasher. The only appliance that GE makes that hasnt broken is the stove/oven that is over 10 years old and shows no signs of weakening.I purchased the upgraded stainless steel model that contained all the bells and whistles. It lasted 1 year and 3 months before the entire control panel stopped working. We utilized the dishwasher about once a week or once every two weeks in a two person household. Hardly a rough environment for a 700$ appliance. The repair costs was quoted for 99$ just to have GE look at it. The control panel was 140$, plus additional labor. This amounts to over 280$ to repair a year old product. I advise buying LG or Bosch.

Its been more than 2 months that GE repair has been TRYING to repair my 4 month old dishwasher. 4 service calls, 3 wrongly ordered parts, GE blaming repair company, and repair CO. blaming GE. The repair company on their 4th visit told me wrong part again and that they refuse to come out anymore. They lost enough money already. When talking with GE consumer Dept. promises of a call back by a manager has been non existent, now they wont even return my call. I have a 5yr extended warranty on the dishwasher and I cant seem to get anywhere with the factory warranty. GE by far the most unprofessional company I have ever dealt with. They were happy to take my money for 4 top of the line appliances, after that youre non existent to them. Its a shame that legal counsel is what seems my only avenue. Will never consider buying GE products ever again.

First Profile microwave/oven caught on fire. Was replaced. Front panel on Profile refrigerator not reacting to touch. Repairman said that this model had problems. Fixed it - cost over $100.00. Dishwasher (Profile series) not worth the cost of heating the water to run it. Cleaned dishes by hand. Stove top died - not reacting to touch. $90.00 for repairman to visit us, and another $60.00 to tell us what was wrong. A lot of money for inferior products.

This is a very nice brand of microwaves. Has easy touch from 30 sec to 10 mins. Meaning you touch start for the 30 sec and press 1 for one min - just hit start after. The only bad thing is the plastic coating over the buttons is starting to rip. Not a big deal just doesn’t look as nice.

We bought 3 GE Profile appliances in 2005 when we renovated our kitchen. We have not had much problem with the gas oven/range/stove. We have, however, had nothing but problems with the microwave (which I submitted a separate review for) and the dishwasher. Recently, a friend made some suggestions regarding the dishwasher. I then went online and watched some tutorials on troubleshooting my dishwasher problems. I tried all the new suggestions and the dishwasher worked OK the one or two times after that and then back to all the old problems: 1. We have to scour every dish until its nearly clean before loading (even though the instructions specifically stated no pre-rinsing necessary). 2. I am not sure the soap cup opens. The soap is always left caked in the cup resulting in running the dishwasher twice. We have tried all kinds of various soaps and they all do the same thing. The eco-friendly soaps are the worst. We strive to be eco-friendly, but how can we be if we are using the harshest soaps possible AND running our dishwasher twice?! Not to mention the pre-rinse scour and running water until it is 120 degrees prior to running.3. The dishwasher also leaks and is very noisy.I have read some other reviews on this product and realize our dishes are not always dry at the end. This is a non-issue for me. I dont care so much if the dishes are dry. I do prefer for them to be clean. Dishes are a task I do not prefer to do. It would be nice to have a functioning helper. I am grateful the thing hasnt caught on fire. I saw that this dishwasher currently sells for $800-$1,500. I cannot believe it. I wouldnt spend $100 on this piece of junk.

We have had our GE Advantium for 4+ years and the paint has started to peel off the inside of the door. We have an extended warranty with Home Depot but they deem this a cosmetic issue which is not covered. The cost to replace the door (part only) is about $260. Not sure self-painting is safe. I read here that we are not alone in GE microwave paint peeling off inside their microwaves, in general. Has there been any recall or calls action against them for this shoddy product? We love having this microwave/oven but feel like we got hosed by GE and Home Depot.

Purchased a microwave 5 weeks ago. When cooking it smells like something is burning. GE would only issue a goodwill certificate. Now Im forced to buy another GE product. After taking the cover off its clear that one of the connectors actually melted. It bubbled up and turned black. Because of this and the fact that other reviewers had the same problem. I dont want to buy another GE product. I dont think its unreasonable to get a refund since its only been 5 weeks. If I have purchased at a different store with a longer return policy I would be able to just bring it back to the store. Apparently the quality of GE products has gone down. I would not recommend.

Purchased a GE Profile (oven and microwave unit) for over $3000.00 seven years ago. The protective coating on the interior of the microwave completely wore off down to the metal under the wheels of the turntable. GE calls this minor chipping (which it is not), advises to stop using the product, and offers a $100.00 off a new GE unit because they cannot fix it. The product should be recalled, just like Honda did when their Pilots were peeling.

Our microwave, model number JVM1750DP1BB, was manufactured May 2011. On Monday, Dec. 30, I was heating a bagel when the small plastic hook holding the rack caught fire. The interior of the microwave burned, but I was able to put it out before it spread too far. I shudder to think what might have happened it I had been in another room. Im irritated because I keep reading that this is a common problem. Im irritated because MY HOUSE COULD HAVE BURNED DOWN. Im irritated because it seems like GE isnt doing a great job at making it right. Ive attached a photo below, showing where the plastic pin burned. I can say that Im shopping for a new over-the-range micro, and it wont come from GE.

My GE Profile Dishwasher is a plain Jane without the bells and whistles, yet is a trusted, working appliance. Honestly, the only beef I have with this model is that plastic articles do not dry completely unless placing the controls on Heated Dry, and leaving the dishes in the dishwasher for the entire drying cycle. I have had my kids place some dishes in the dishwasher, caked in day old food. I left the plates in the dishwasher, hoping to teach my kids a lesson about rinsing off their dishes before placing them in. Imagine my surprise when after running the dishwasher through its normal cycle, the plates came out spotlessly clean! Impressive!

Our dishwasher has gotten very warm mid-cycle and now trips the breaker in the house each time we run the cycle. The problem became evident in April 2012. We have called in a GE repair person to fix it and they said it was a heating issue and not repairable. We have not used it since, but have not replaced it with a new one yet. In August, we read about the recall of a similar model number manufactured within same time frame. Our machine model is PDW7300J03WW, the recalled model is PDW7. Our machines serial # is **. Strangely, the serial number is not listed in the recall, even though symptoms are exactly the same!We have called GE Consumer Affairs at 1-800-386-1215 four times, the most recent today, 9/14/2012. Each time we call, we are left on hold for 59 minutes only to be disconnected automatically! I am sending a registered letter to GE CA with a copy of this link and intend to contact my local news if I do not receive sufficient response within the week. Does GE need to see an actual fire report from my fire department or worse in order to get their attention to replace the unit? It is disgraceful and extremely dangerous.

Dishwasher lasted just little over a year when it broke down first time. Power switch made out soft plastic jammed up. Next cheaply made door close switch cracked. Part prices are average price. Because poor quality, I predict replacing this within 3-5 years.

The performance of my microwave is great - not fancy but does the job. Its size is fine as it fits just right where we wanted to put it. No complaints. I havent had any problems, therefore I consider it a great value. Plus, I would get the same size if and when I replace it!

I bought a JVM3670SK05 a little under two years ago. It is an above the cooktop vent-a-hood microwave. I believed I was buying a quality unit. Now everything is working, but there’s no heat! Even the cheap units from Walmart work longer than this expensive piece of crap! Now I either have to spend enough to buy a new hood for cooktop and new microwave or pay the same price and buy parts in hope that they will not go out again. Not really feeling lucky with the GE product.

Bought a new home. GE appliances came with our purchase so it was not our choice. Dishwasher leaked and ruined our wall. Service would not bring us a new dishwasher, they wanted to repair a brand new dishwasher that has multiple problems and damaged our new home. The service guy was such an ASS! Im in my late 30s and this guy was in his 50s and he was acting like one of the mean girls. The dirty looks he gave me! Wow. He said he fixed it, and Im actually running it now. We will see what happens. What junk! I know its going to leak again when we put the new wall in. Especially after reading these reviews!

I guess my GE Profile dishwasher is a lemon. Sounds like it from all the other reviews. Same deal - purchased it in July of 2016 and by October 2016 it went out. Technician that was sent told me it was the electric and I needed to have an electrician fix the fuse. Electrician came out and said it had electric, that it was the dishwasher that failed. Next technician fixed it and said the electronic panels get confused. Three days off of work. December, 2016 the dishwasher failed again. Had no dishwasher throughout the holidays. They scheduled service technician and then cancelled because the one technician they had was out sick.Today, January 9th, they called to let us know they were on the way, but never called the number they were supposed to, so now we are totally taken off the schedule. Ive been on hold and disconnected three times and now have been on hold for one hour and 6 minutes. DONT BUY GE APPLIANCES - Terrible service and crappy appliances that dont work. This is really sickening since I have ALWAYS used GE appliances.

At least 3 times, with different people in our household, our microwave has started on its own. It was plugged in but with no input from anyone. We checked the website and no recall. Microwave just out of warranty. This was a disaster in the making. We took it as a sign to discard this appliance. GE NO MORE!

GE Profile Advantium 120 when cooking on stove under microwave, the fan in the microwave goes on and does not go off for 30 minutes. This happens with only one burner on and stove not microwave set at 320. Had service out told there was nothing he could do. Called GE and again told that there was nothing they could do.

After a short four year history of not cleaning our dishes well, our four-year old GE Profile Quiet Power 6 QP6, model PDW9280N00SS, s/n-VM819634B, overheated and did not shut off and melted everything plastic inside. The house now has a horrible smell of burnt plastic. Ill start the process tomorrow of contacting the insurance company and looking to get this odor out of our home and a different brand of dishwasher into our home.

We purchased the entire line of slate/GE/Adora appliances from Home Depot 11 months ago. The fridge has required a service call for a VERY loud freezer. The microwave is fine. The stove/oven is fine. The dishwasher is a GIGANTIC piece of junk! 4 service calls and its still clunking, tapping, grinding and just extremely loud. VERY DISAPPOINTED!! We can only run it at night because of all the racket. The layout of the sections for dishes makes it totally useless inside. It doesnt clean. Soap residue is everywhere. My old DW was quieter and more efficient. *Insert sad face here.*

A small black piece of plastic, which snapped into the back of the microwave handle has bent/shrunk, and popped off. My microwave is just a little over one year old. I called the GE 1-800 phone number for parts, and GE does not offer a replacement part for this, without buying a whole new replacement handle, which costs over $160.00.

We purchased a GE Profile dishwasher because our old one was recalled for fire hazard and we were offered a rebate on a new one, and told there was no fix for the old one. On the new Profile dishwasher, the water inlet valve stuck open and flooded our home. Tech said we may as well have had a hose on full blast all night. Word to the wise, do not turn your dishwasher on and go to bed or leave the house! 7 1/2 hours later we woke to a completely flooded downstairs. When we were researching whether or not there were other complaints on that model dishwasher, we noticed there had been a recall for fire hazard ON THE NEW DISHWASHER! Since this is located right under our bed, we were fortunate though not happy about the flood! We have exceeded the 40K mark in damages and the assessments and estimates are still coming in. We will never own another GE product, though we recently purchased a stove with a double oven which is thus far wonderful. GE has also recently been purchased by Electrolux. We chose a Bosch for our new dishwasher.

Very convenient. Easy to use. Take some time to clean though, have to cover all food for splatter of food on the topside inside of microwave, have scour off with strong pad. Also it is not radiation free for health. But the microwave is easy to lift. The best thing about it you can cook frozen foods. Like meatloaf, beef stew my favorite, pizza, chicken.

I cook a lot of popcorn in my microwave and it hasnt burn a bag yet. It warms food quickly. Also, it cooks bacon really good. But the best feature is the steam cleaner that saves me time. It steams for about 2-3 minutes then all I do wipe the steam off and its clean.

The looks are ok. It works great, not too noisy. Wouldn’t mind replacing it with a different color and apparel. It fit great over the oven and is a space saver. Cleans up well, not too hard to clean. Not sure of the exact price, but I remember it was very cost efficient

I have had a fridge, a washer and a microwave oven from GE. I have been so disappointed in all three, but the microwave oven disappointed me the most. The door broke around the handle and the hinges, and was replaced shortly after buying it. Then it broke again and I replaced it myself. Then it broke again. This makes me not want to try another GE product. The fridge shelves all broke because they were plastic. The washer fell apart shortly after a year. It is just myself and my husband using them, so they should last for years. When you buy large item, you would like them to last a long while.

First, I want to acknowledge that I misplaced my receipt due to a move, 8 storage units and 4 houses. But...I did register my new, never before installed dishwasher when it was installed October 2020. After install I ran it empty to test/clean it. IT LEAKED. I called GE to schedule repair. I was told it was manufactured in 2018 (another said 2019) and it was not under warranty. I explained I purchased it only a few months before and installation was delayed due to my contractors. They said I would have to pay for labor but the parts were covered under warranty. I didnt like it but agreed because I couldnt find the receipt (from a big box store).Local repair people came, after 2 more calls, 3 weeks later and fixed the leak. They did not run or check if anything else was wrong with the dishwasher. I began using it and quickly realized that it did not get the dishes clean. It does not heat the water, it does not dry, it cant possibly sanitize without heat and kitchen installer said it was missing the kick plate. Geez!! And this is just the things I know!! I have called 4 times now to schedule a service repair, each time having to explained the whole thing, sit on hold, ask to speak to a supervisor, be transferred to customer service and 4 times I have been DISCONNECTED!! I bought all GE appliances so they would match but I would give anything if I didnt have to deal with GE again!! Unfortunately, I will have to call again Monday or buy a different brand. Save yourself and buy another brand!!! Wish I could submit a picture.

Purchased a GE 650 dishwasher which we quickly discovered has terrible racking for North American dishware. Also the control panel is overly complicated yet limited to use (always flashes settings even when not in use). Once you figure out how to load dishes into the very tight/ narrow tines they fall over and chip/break. When investigating the dishwashers by GE made in China/Taiwan etc all have same issue. The ones made in USA by GE have wider and longer tines. We have had MANY dishwashers over the 40 years and NEVER had one as bad as this.When calling GE customer service the senior rep was not willing to offer any customer satisfaction as nothing technically was wrong. At one point she stated we had made the purchase so live with it even though it was the wrong choice. We offered to pay for any cost difference, etc. When questioned about GEs interest in customer satisfaction she stated that was not a warranty issue. She was not concerned about a satisfied customer. With that, we will not be purchasing another GE product or its affiliates. What a waste of money.

The jvm3160 series has a known defect in the door interlock electrical system that blows the unit fuse if the door is opened while the mw oven is operating. This usually occurs after the warranty expires. Cost to repair can exceed the original cost of the unit. Mine failed in warranty but it took them 10 weeks to fix it. The reason it took so long is that GEs repair protocol calls replacing the whole door (which has NO electrical parts in it) instead of replacing just the latch assembly because the labor cost to replace the latch itself exceeds the cost of a complete door assembly. Door assemblies were on back-order because of the high failure rate.

We bought all new GE Cafe kitchen appliances when we remodeled our kitchen 3 years ago. The first Cafe dishwasher needed repairs in the first 3 months, and was replaced within 10 months due to continuing problems. The replacement GE Cafe dishwasher was deemed non-repairable after 2.5 years. The unit has a design flaw and the bracket holding the top water sprayer broke. The extended warranty with Assurant will not cover the dishwasher because they say it is not a working part. We are trying to get GE Customer Care to help but after three weeks the message we are getting is they do not care at all.The front burner on the cooktop will not light. GE cannot get a replacement part so the cooktop was also deemed nonrepairable after only 3 year. Our Cafe refrigerator also has a design flaw. The refrigerator must be unplugged to reset the computer when the water filter is changed. If you dont the refrigerator does not recognize the filter and will not dispense water. Needless to say I will never buy GE again. It is sad to see what was a good company go down the tubes.

While the microwave works fine, as far as microwaves go; it does heat unevenly but eventually gets the job done, the interior is cracked and shows signs of rust and deterioration. I dont remember ever seeing this on in previously owned microwaves. I would only use it for basic heating and reheating.

We bought a GE dishwasher a little over 3 years ago. In the last week of September we awoke to the smell of hot or melted plastic. We found the source to be the dishwasher. I had loaded and started it before going to bed the night before. The counter-top above the dishwasher was stove top hot and upon opening the dishwasher found that a cutting board that we have had for many years and have always put in the dishwasher had melted on top of the heating coil. Dishwasher safe items on the top rack melted as well. It had been drying for at least 9 hours. After pulling the dishwasher out we saw the heat shield had melted and was crumbling. We contacted GE, sent them all the pictures and they told us it was not a safety issue. We have no doubt that if we had not woken up so early we would have had a fire in our house caused by the dishwasher.

I have had 2 Profile dishwashers in the past 3 months. I have not been able to use either one. First one had a cracked tub and the replacement would not run. I tried for hours to contact GE customer service and was placed on hold for almost an hour before they closed for the day. Not only is this washer a piece of garbage, GE customer service is terrible. Do not and I will say this again do not but this product.

The way you put bowls in this model doesnt allow for cleaning them completely. You must wash the bowls AFTER cleaning them in dishwasher. Waste of time & money. Capacity smaller, noise louder. Not good value.

My husband and I enjoyed our 1980s White GE Microwave and Stove/oven. But, after 15-20 years with the same appliances, we finally saved up for upgrades and purchased a new Stainless Steel (mid-range priced) GE Microwave and stove/Oven. I cannot begin to describe our disappointment. The Microwave is above our Stove/oven. Our old microwave had two powerful lights underneath it - one on each side. This microwave provides one small, weak light that does no good any time of day. Why would GE go from two great lights to one middle useless one? Also, the faint white numbers on the front keypad of the microwave are barely visible during the day - forget about seeing this when the light is not perfect. I foolishly assumed these numbers would be backlit on a black background. Onto the Stove/oven. The temperature is not accurate but that is something we can deal with. After the oven is pre-heated, the assigned temperature stays on the display pad - NOT the actual time. Who cares about the temperature you set the oven to - dont we all need to know when to check or take out our food? Our last oven always showed the time. We did not join the Stainless Steel bandwagon 10-15 years ago when others did - which we thought would be good for GE to get some kinks out. I Guess we should have waited 10 more. Proper lighting on your Microwave and The time on your stove/oven while cooking are not too much to ask for when we just dropped at least 2-thousand dollars!!!!!

The defect is in the Gas Control and Thermal Coupling, per my licensed plumber. GE tells me my water heater is still under warranty; therefore, I would like an authorization code to have it replaced by Home Depot where it was originally purchased. Home Depot tells me I need GE to give me the authorization code. BTW, your CS rep was very helpful. She is sending both items to me, but I prefer to have a replacement for the cost my plumber will charge to install parts in a questionable product. Thank you.

We bought a brand new GE kitchen. We put all GE in the new kitchen. The hood/microwave/convection oven broke in 9 months. We had service out, and they wanted the same amount we paid for it to repair it. My husband is an engineer and he got it to limp along. Then in September, it broke and cracked up. All the control panel cracked and broke. It does not work. We called GE. They said to get a replacement. We went to Sears and bought a similar unit as the original has been discontinued. We were assured of a credit towards the new one. A credit would not be issued. Gary ** has continually called my home but not my cell. He reached me today in school, a Special Ed behavioral unit, and started yelling at me over the phone. He said that I did not provide serial numbers. I have many times. He said there is no record of my complaint. I have called, emailed and written at least 3 times providing all information. We just want a credit for the original unit. We have provided sales slips, etc. Please help.

My microwave is 2 years old and stopped working on Thanksgiving Day. Customer service was very responsive to send out a repair person. There was a minimum $108 charge plus and time spent. It turned out to be a loose wire inside the machine and I was charged another $50 for him to tighten it. Machines should go longer than 2 years without a service call and I will buy the extended on any other GE I purchase.

GE Profile Microwave/Convection Oven JVM1790WK, over the range unit, CAUGHT ON FIRE while microwaving water for coffee. One of the four prongs that holds the oven grid in place started flaming wildly and smoking after about one minute of microwaving. My whole kitchen has an acrid awful burning smell. This is my second unit for a small kitchen, and I will be lost without this. The first one I had the handle fell off. This one is too dangerous to use. These units cost $600!!! I cannot afford to replace one every few years. Maybe this model and brand is bad news?

We have a 2017 GE profile built on microwave. The microwave started shooting fire inside the microwave a year ago. GE fixed it. Last week the microwave started shootings fire inside the microwave again. This time it was much worse. The GE technician told me it was not fixable. I called GE customer relations and was told too bad because it’s not under warranty anymore. They offered a minimal discount on a new similar model. The attitudes of the customer care representative and supervisor took me by surprise. They were curt and told me, Guess you should have gotten the extended warranty. When it comes time to replace my kitchen there will not be any GE products in it. GE does not stand behind their products. The tech told me there are issues with the profile microwave and he felt they would replace it. They did not replace it and were rude. I have been a loyal GE customer. Not anymore.

I have just purchased a new GE dishwasher because mine just broke after 35 long years of excellent service. I am so completely satisfied with your GE products, and I would like to tell you also that the double oven stoves are still working well.

Bought a new GE over the range microwave in April 2021 and it broke/stopped heating July. They replaced the magnetron in September and its broken again a month later. Same issue and parts are out 2-3 months.

I own a GE over the stove Microwave that spontaneously turned on while I was sleeping. Once the unit was running for a bit, it caught on fire. It melted thru the glass plate before I woke up and was able to remove power from the unit and stop the fire. To GEs credit, they did send a tech out to our place. The tech never did anything to find out what caused the problem. Instead he was just looking to see if the unit was salvageable. He condemned the unit, and GEs solution was a $25 rebate on the next one of their products I would purchase.The liability GE would have been up for if I were not home would have been astronomical. This appliance put my property and the life of my family and neighbors in danger. GEs inaction on this problem shows that they have no concern for the safety of the consumers that use their products. The HR response has been appalling.

The wheels to roll tray in and out comes off sometimes, other than its fine, average wash cycle. Doesnt really clean heavy food off dishes so have clean first then put in dishwasher.

We moved into our new manufactured home in May of 2013. That is the month our above range built-in GE microwave was installed. In October of 2013, one of my sons heated a frozen chicken cordon bleu serving for 3 minutes, 45 seconds, according to packaging directions. He said that some of the inside of his food was cool, so my other son put in his serving for four minutes, zero seconds. All of the packaging was removed and each serving was placed on a separate Corelle plate and covered with Glad microwave-safe plastic wrap. While heating the second serving, the microwave started on fire. Fortunately, my son extinguished the fire before it spread. The food did not combust. The fire seems to have started from the ceiling behind the fan. The entire inside of our microwave is clean except for the soot that billowed out from the center of the ceiling. When the service tech came, he scrubbed the soot off of the ceiling with some paper napkins (which he left inside of the unit) and said that the microwave was a total loss. He also said the fire was caused by misuse, because plastic wrap is not meant to be used in the microwave, therefore even though the fire happened within a year of purchase and installation, our warranty was void. I asked GE to get a second opinion and they agreed to send a third party servicer (A&E) who stood me up three times! I finally got to schedule a GE tech to come at the end of December and they sent the same guy who said the fire was our fault! He told me that he never said plastic wrap is not meant for the microwave, but that we are being dishonest because fires only start when the food is left in the microwave for too long. He accidentally let it slip that he is seeing the same problem with GE microwaves in a lot of new construction for student housing in Tallahassee. (We live 20 minutes south of there.) He attempted to recover GEs reputation afterward by saying that of course it was the students faults, too, for misusing the microwave units. Anyway, GE has graciously offered to sell us a new microwave at slight discount. Haha, no thank you!