I purchased a stainless steel GE dishwasher for $508.68 since I remodeled my kitchen October 2016, I contacted GE in March 2017 because the stainless steel on the dishwasher door started to have rust spots, they sent a technician to look at it, they told me that they cannot replace it because the aesthetic warranty is only good for 30 days. They authorized the technician to replace the door, however I have the same issue with the new door, and also the dishwasher stopped working. I contacted them again. The technician was able to fix the dishwasher, but as far as the stains on the door they told me thats an aesthetic issue. They cant do anything about it. I called the consumer relations department. I spoke with CIARA GE case # **. They offered me a small discount and I have to come up with $400.00 to buy a new dishwasher.I feel that a good business should always stand behind its products. The dishwasher obviously is defective, they sold me an appliance that supposed to be stainless steel but its something else, the right thing for GE to do is to exchange the defective product for the right one. I am very frustrated that in less than a year I have to spend over $900.00 for a dishwasher. I am great customer for GE, I remodeled my kitchen, I purchased a GE refrigerator, cooktop, oven, kitchen hood, microwave and dishwasher, I think I deserve better than a small discount for a defective product.

The looks are ok. It works great, not too noisy. Wouldn’t mind replacing it with a different color and apparel. It fit great over the oven and is a space saver. Cleans up well, not too hard to clean. Not sure of the exact price, but I remember it was very cost efficient

We have the dishwasher, fridge and stove from the GE Cafe series. In the 2 years that we have had them, we have become pretty acquainted with the local repair people because there hasnt been one month when all three were working at the same time. The fridge had to be replaced (we lost over $1000 in just food) - the replacement fridge had to be repaired. The customer service is awful. They are just trained NOT to be helpful. GE takes no responsibility for putting out such low quality, high priced appliances. I will never buy GE again and hopefully these reviews can save you the same grief and hopefully money (we have to pay for service repairs). Buy anything but GE, one star - is one too many!

I purchased a GE Profile stocks in 2007 and a GE microwave model JVM7195SK1SS purchased 12/30/16. We have replaced the knobs on the stove 2 times because of peeling in the past. Now we need to replace the microwave handle. The handles and knobs look like metal but they are cheaply made white plastic covered with a sharp silver coating that peels. It appears the knobs get overheated when the oven opens and the microwave handle from the steam when cooking on the stove. Last night I cut my hand on the handle! We reordered the faulty handle and now getting charge $100 from GE. The company should take responsibility for their poor design and replace it for free with a nonpeeling part. I know that we will get the same handle and won’t be able to use the burner below or hope that using the fan will keep it from cracking again. I would never recommend a GE product again.

I notice when cleaning the inside of the microwave that the coating on the top (ceiling) of the microwave has bubbled and cracked and there is a hole in the interior top coating. This unit is about 9 years old, and is a dual unit as the bottom is a convection oven with very little use. Im told I need to replace the microwave. I have never seen bubbled and cracked interior in many years of owning and using this type of appliance. The photo shows the defects in the lining coating. Im really upset about this.

We just had a Fire in our GE Microwave, Model # JVM1750SP1SS. Manufactured in August 2010. Purchased at Home Depot in December 2010 and installed January 2011. The right rear shelf hook caught fire while the microwave was in use. Luckily, we saw it in time... We are not sure who to complain to or tell about this. We went on GE.com to inform them of this issue and am waiting for a response. I see here that I am not alone. There is other info being shared on YouTube about this issue as well. GE better make good on this for me. Now I have to find my paperwork... Figure out who will remove this under cabinet installed oven and replace it. I am probably on my own here as it is 3 years old!!

I brought our brand new home just over 1 year and 8 months ago with all new GE appliances. One of the GE Smart Built-In Double Wall Ovens, the bottom one which we never use, but the inner glass shattered randomly, very dangerous and they want us to pay them $100 for the inspector visit and then more for the par and service $325 for the replacement, the GE is disagreeing they had a defect on installations. That is an experience that we never repurchase GE brands, my friend had the same issue. They replaced in their house this way without warranty, however they disagreeing our oven had the defect on installation, lesson learned, never never buy the GE again!

We purchased this new 8 years ago however the problems started after about two and a half years of use. I called GE when the paint started peeling off of the door of the microwave. They asked me if I cooked salty foods. I cook bacon in the microwave. They told me my only option was to buy a new door and have it installed. It was $250 at the time. I did not have the money or desire to fool with it. I continued to use the microwave and it has continued to degrade. Now eight years later there is so much metal showing that we decided we must do something. It is unsightly and very difficult to clean because its rusting. Ive been expecting electrical arcs to occur and the microwave to catch on fire. It hasnt done that. It has continued to cook the food. The entire metal area on the door is without paint. There are other large areas of metal and rust inside on the bottom of the microwave. The entire vent panel is without paint and rusted. We also had to have the control panel replaced twice. It was covered once under the warranty and once it was not. We also had to replace the element in the oven which is used rarely. To replace the microwave and oven combination now would be $3,500. When I do replace it I will replace it with a different brand.

I purchased a GE dishwasher 1.5 years ago and it has been nothing but a problem since day one! The door will not stay latched and the dishwasher is perfectly level. You might get 1 or 2 washes in before you have to work on it again. We bought a set of appliances from GE and the stove and refrigerator have worked well. However this dishwasher is junk and I based on my experience I would not recommend this product to anyone!

I bought GE OTR microwave in December. It is exactly one month old now. My model no. is: 9195SVC. It looks good, but I find the fan very noisy, even when it is at low. My range hood which we had in the kitchen prior to this microwave was very quiet at low and only a bit noisy at high. I do not know if the noise is because I have steel exhaust pipes vented out. Rest is O.K. but given that others have reported problems in 1-2 months, I am still nervous.I bought this product at Sears with an extended warranty, which is some relief. However, when I was shopping for this at Home Depot, the salesperson told me these microwaves last only 4-5 years. One good thing about Sears extended warranty is that if it is not used over the five years, they refund the warranty payment (with taxes) in the form of a gift card and they were also cheaper than Home Depot.

Sometime in the 1970s, my mother bought all new GE appliances; a refrigerator, a kitchen range-microwave combo and a dishwasher. After her death my husband and I moved into her house and continued to use these appliances until 2007. The refrigerator and dishwasher are still going strong as of now... October 2014. The refrigerator only needed the drainage line cleaned. The range began to have some electrical shortage problems and rather than try to repair (which is what we should have done with both appliances), we decided to replace the refrigerator and range/microwave. We bought new GE appliances; a GE refrigerator (my brother put the old one in his shop), GE microwave and GE range. The new refrigerators icemaker would not work property when we got it and the microwave (Model #JVM2070SK02) quit early this year (big difference in the old microwave at 30 some years use and my new one at only 7 years use). Because my husband was diagnosed with a brain tumor and I was the only caretaker, I was not able to address the malfunctioning icemaker immediately. In fact, because of my husbands hospitalization, I wasnt even at home during that year enough to use the icemaker. WOW! What a ripoff GE is selling to consumers. My complaints wont solve my problems nor the problems experienced by other people who bought these defective appliances but it helps to vent my anger. Just recently a small leak in the waste-water drain hose (easy to replace) sent me scurrying to find a new dishwasher but when considering the replacement of my 1970s dishwasher and the reliability of my newer appliances, I decided that my 1970s dishwasher will outlast anything I could replace it with. So I decided to replace the waste-water drain hose myself.What a sad appliance market we have in the US when buyers have to replace newly purchased appliances anywhere from a few days to a few short years after purchase. I think appliance companies intentionally produce inferior, unfixable products so consumers will replace their inferior ones with new inferior models thus keeping up sales. Do we have a choice? I lived before dishwashers and microwaves and I can live without either now. I would prefer not to go back to wood cook-stove and an icebox but I may not have a choice (I actually have an icebox if needed). Is there any way to hold companies responsible for the products they produce? If anyone out there has had longevity of 10 years or more use from a newer appliance line, that is appliances made since 2000... Please share the producers name with rest of us. GE isnt what it used to be and neither are many other US brand name appliances.

Today I heated some spaghetti sauce in my microwave and it splashed, so I wiped it out. My microwave is built in and was pretty new and in the house when we bought it 4 years ago. It is in the base counter so I have to reach down to clean it. l havent had a problem with it but when I wiped the inside top I felt bumps and when I looked at the cloth to see what was on it, there was paint on it. That has never happened before so I of course looked and there is a fair amount of peeling paint in one spot. I have had microwave ovens for many years. Never had this problem with any other brand. What is that?? Can it be fixed? Is it dangerous???

I have a GE dishwasher installed by our builder. It is 6 yrs. old and for 6 yrs. it has been a problem. I already had it serviced in last years recall and now I get another notice. It is located close to our TV viewing area. and is so noisy. I hate to run it when we are watching TV. I would never buy another GE. We are also having problem with our GE double oven. I ruined several holiday dinners before realizing the temperature was 75 degrees where it should be. A replacement part is almost a $1,000. I would never ever buy another GE appliance.

Beware of GEs scam! My new house came with a GE microwave oven model JVM1630. It no longer heats food so I called GE repair. Heres basically what they told me: It is likely the magnetron tube and it is still under warranty, so no charge to replace it but I would have to pay $99.95 for the repairman to come to my home to diagnose the problem. If I decided I didnt want to repair the microwave, I was offered a $100 coupon toward a new one but it had to be a GE and it had to be bought on their website only. If I decided to go ahead with the repairs, the $99.95 would be deducted from the bill and I would only have to pay for additional parts and labor. I repeatedly asked for a ball-park labor charge so I could make an informed decision as to whether it was cost effective to have the repairman come out or just get a brand new one elsewhere. The person on the repair line hung up on me! I called back and I was told the same thing; that no one could tell me what the labor cost estimate might be. I asked to talk to a supervisor and same story. I didnt schedule a repair because I was taking a long trip and wouldnt be using the microwave anyway. When I returned from my trip, I called GE repair and again they wouldnt give me a ball park figure. Frustrated, I decided to have the repairman just come out and repair the darn thing and an appointment was scheduled for the next Monday. I had to rearrange a Monday day trip to Wednesday and set the repair appointment. On Monday, it was starting to get late in the afternoon, so I called to find out if the guy was on his way. A recording said my call was noted and I would be receiving a follow-up call. About 10 minutes later, Kim in dispatch called to tell me she had to reschedule the repairman to Wednesday. I explained I already had an appointment on Wednesday. which was already changed because it conflicted with the repairman coming to my home. She told me the repairman couldnt come because his truck wasnt safe to drive so that whole day was shot. The appointment was rescheduled for Wednesday and I had to again reschedule my other trip. When the guy finally showed up on Wednesday, he told me to put a glass of water in the microwave and start it. Ten seconds later, he declared it to be the magnetron tube. He was at my house about 10 minutes, just long enough to take my $99.95 credit card payment and to give me an estimate of $246.90 to repair the microwave which included the free magnetron tube, a $20 part plus tax and labor. The estimate had instructions on how to get the $100 coupon if I decided to buy a new GE microwave, which he said is what most people do. He didnt seem like he came prepared to repair the microwave at all. I was so frustrated and already out the $99.95, so I told him to go ahead and repair it. He said I should call repair to schedule him to come back to repair it! I told him to just repair it now and he said he didnt think he had a magnetron tube in his truck. I asked him if he would go to the truck and check! He did, and nope, no tube and he left.I think this is a great scam GE and maybe others have going. Its entrapment. They get you to accept a repairman to come to your home and charge you nearly $100 for it, but give you a coupon for $100 for a new one but it has to be a GE and can only be bought from their website where they can go as high as $500 or $600. By the way, I got on the website to find a replacement. My model had been discontinued and the only one in my price range was also a discontinued model. They charge $75 to come out to install it and another $30 to take away your old one. I called local appliance stores to see if I could unload my old microwave for parts and they all said the same thing: stay away from GE products.

I purchased a GE dishwasher, stove and refrigerator in December 2012. All 3 appliances have broken, needed parts (which were also broken) and I still have appliances that arent working appropriately. The dishwasher door broke and it doesnt clean or dry well. The induction stove (the main burner) doesnt work and the replacement part was delivered to my house and that was delivered broken. The fan in the refrigerator broke and still remains broken. I have had nothing but headaches since the day the appliances were delivered. I would not recommend GE appliances.

We purchased our new GE Over-the-Range Microwave (model HVM1750DPWW, 1.7 cu. ft.) for $269.00 in February of 2012 and in August of 2013 it started to malfunction. Specifically the microwave would start on its own whenever we would OPEN the door. Now the microwave does not work at all (with the door closed or open). Based on the feedback that I have read in some of the posts on this site, I will replace the microwave since the maker can no longer be trusted to manufacture units that are robust and safe. But what manufacturer can be trusted at this point? It is my understanding that all microwaves (from all major companies) are currently made overseas with poor materials and highly suspect safety and quality standards. (Note - previous GE Microwave [same type - over the range] lasted for 14 years.) Thanks to Consumer Affairs for allowing us to post unfavorable reviews.

I bought one of the microwave ovens with two metal shelves. I found that the shelf in the middle of the oven was in the way and I removed it years ago, but left the top shelf in the unit. The other day, while cooking in the microwave it started to spark at the point where the shelf sat on a small clip. The inside of the oven is ruined. Why would anyone put metal shelves inside a microwave? Im just lucky that I was nearby and able to stop the fire before it destroyed my kitchen.

Microwave oven 2008 - The food doesnt go around anymore. The glass insert does not turn. What can I do?

My 11-month-old GE Advantium oven no longer has any display, totally blank. When calling to make an appointment I was unable to speak to a live person but scheduled one for today from 1-5 pm. At 5 pm I received an automated call that the technician was running behind and would arrive in about an hour. By 8:30 pm no one called or came to repair my oven. At 4 pm when I was wondering if I would see a repairman I attempted to find on the internet a phone number that would connect me to a live person but had no luck. I have no idea what company is being sent out to make the repairs so that I can get in touch with them. Their service sucks.

Wow, Donna from NJ, I could have written your dishwasher report! But since I didnt, I have never been so disappointed in an appliance purchase as my new GE dishwasher! Not only are some of the dishes & silverware coming out more dirty than they went in, it takes a ridiculously long time for a cycle. And if there are more than a couple of tablespoons of water on the door, it will pee out onto the floor when the door is closed! Not to mention that there is junk stuck to the floor just inside dishwasher, under the door, after the cycle has run! Yet the worst part is how dirty dishes are after even a Sani Wash cycle! Sometimes, the detergent lid is still closed. Sometimes its open, but the detergent is still there. Even then, dishes may be cleaner in appearance that time, than when the detergent is gone. A water glass, may have gritty stuff - not just detergent stuck and hiding down inside, or more obvious all over inside the glass. I have spent the past year experimenting with various things: detergents, amounts of detergents, arrangements of dishes, heat of water, pressure of water, rinsing dishes before cycle, etc. Glass and pottery normally fare better than plastics, but again the plastic may have started cleaner than they come out! The dealer has been out three times, finding nothing obvious the DW itself, nor anything I have done wrong. He has been told there is a kit that would fix the performance problem, but he cant purchase it, nor can his distributor. I have been told the length of cycle is because our government regulates the amount of water used. So my question is, then its okay to use more electricity?! Its totally embarrassing to serve someone a drink in a glass that is found not clean near the end of the drink! And I, too, have an old 12-years-dishwasher that still works! It was even a cheaper brand. I never had to think where pieces were arranged in that dishwasher. I just thought, in my newly built house, I should have new appliances!

I purchased a GE Spacemaker microwave in Jan. 2001. Shortly thereafter, the frame around the door cracked, becoming worse until in Oct 2006 I complained to GE. They sent a $75 credit towards another GE. I purchased another GE in Oct 2006. After a while, the handle became loose. Today, the handle broke off at the base where it attaches to the door, rendering the oven unusable. I dont have kids. This appliance was not abused. I see in looking through the comments that other consumers have had similar problems which would suggest a product defect. My next microwave will not be a GE.

Since 2010, our 2006 GE 1.1 cu. ft. countertop microwave oven model # JES1136WL has had power failure problems. It began in our previous home and now in our next home. All of a sudden, Id check the panel and it would say PF, which means power failure. So, Id reset the clock and there it is, ready for the next usage. Over a year later, in our new home, as of yesterday, it will start and immediately cut off. Now, weve been using this microwave in the same plug since May and now its October. So, what happened? Today, Im looking for the users manual and have located it online. But it appears that the PDF GE has for it, the Adobe document, has a problem. So, Im going to check it on my laptop, as this is my PC. Thank God we only paid under $100 for it. On some of these consumer complaint stories, the person paid a great deal for theirs.

When you use the vent fan it is very loud even in the low position. I would also like to see a brighter bulb under the microwave. I dont have much more to say except that the oven functions well otherwise.

We bought our new home 4 years ago & bought upgraded GE Profile appliances. To date, the gas range has been serviced 3 times, the refrigerator too many times to remember & now my dishwasher pump has gone out. We found out the pump just cannot be replaced, but all hoses, etc. must be purchased as well. GE is CRAP & I will never even consider purchasing anything from this company again. Knowing it was bought out a few years ago by Whirlpool (I believe) but still remains under the GE label - consumers BEWARE.

I purchased all the kitchen appliances. All GE brands. The microwave after almost 3 years the white paint from inside start peeling. When I called GE directly, received no help at all. They wanted to replace the microwave and the stove for over $2400. I can buy the full set from Best Buy for almost $2300 all in Samsung brand. Also, this related to paint issue. Maybe the paint is a very low quality or something related to lead-paint. Imagine you are warming up the food and know nothing about the paint is peeling, and each time you have small pieces in your food. I wish I could add the recording of the microwave that everybody could see.

We recently purchased three GE Profile stainless steel appliances for our new home. The total was somewhere around $3500. Within two weeks our $1000 dishwasher would not work. It took FOUR service calls and THREE weeks for it to finally be repaired. Now our $2000 oven (traditional/convection) has stopped working and the oven light will not go off without us tripping the breaker. Service tech not available for 5 days. I am expecting the new micro to go out any day now. All of these appliances are less than two months old. We had GE builder grade appliances in our previous home that are still running strong after 16 years. That is the reason we went with GE again. However, after the above mentioned issues with our new GE appliances, I encourage anybody who reads this to NEVER, EVER BUY ANY GE PRODUCTS AGAIN.

The microwave has done its job for the last 15 years and is still going strong. It isnt perfect, but it serves me well. The microwave is fine, but I am no longer a fan of GE products. The design of their stove makes it difficult to clean. I had to pick their dishwasher because it was the only one with the right dimensions. It does a terrible job cleaning the dishes.

However, the GE Monogram Microwave ($499 at Best Buy) broke down 17 months later, a few days before Thanksgiving 2015. GE claimed it was out-of-warranty, and I would have to pay $99 to have a technician look at it, and would charge for repairs. We are stuck with the GE Monogram Microwave as it is a built-in unit and our cabinet is built around it. So we went and got a new one from Best Buy. When the new one came and when we removed it from the box, it had a large dent in it - a very large one. It clearly indicates a shoddy QC job, as the unit should not have left the factory with such an obvious dent. We asked BEST BUY to replace it, but a new one is not going to come till after Christmas. So it was 2 strikes against GE Microwave ovens for me.We spoke to GE and they were not very sympathetic, and amazingly did not even apologize for the inconvenience caused!! They just stuck to their out-of-warranty mantra, which I understand. But then the occurrence of a second event with another GE Microwave, and the inconvenience of sending back a big dented one was also not acknowledged or perhaps even understood by their CS representative. So it is strike 3 against GE Appliances for me.I would never recommend GE microwaves and was totally disappointed with the Customer service of the GE Appliance division. I also have GE Cooktop and two GE wall ovens and shudder to think what will happen if they should break down. Just sharing a sad experience that holds some lessons for me and my family and friends. (Rethink buying GE Appliances.)

I have purchased a GE microwave/convection oven 7 months ago. A month ago, the control panel broke down and it would not turn on. I called up customer service and a technician was sent after a week. They have diagnosed it and the motherboard needed to be replaced. The said part was ordered and I was told it would be delivered in 2-3 days and a service will be scheduled in a week. A week came and no parts showed up. I have called up customer advocate and they assured me the said part will be delivered in time for the service appointment.Unfortunately, when they came, the said parts have not been delivered and I was given the lame excuse of systems failure; the request has not gone through their system. So the technician assured me that he will put in an overnight request for the said parts and the oven could be fixed within the week. He even gave me his work and cell number for me to call if I have any inquiries. But he never picks up or even returns my calls. So another service appointment was scheduled and parts were delivered, only to find out that it was the wrong parts, supposedly for another customer and for a different microwave model.Its really frustrating when people keep on reassuring that they are going to get it done, but has done nothing but lip service. Its been over a month and my microwave is still a broken microwave. I have learned my lesson and will never again in my life time purchase a GE appliance. PS: I should have listened to the Home Depot guy that sold me this microwave.

Adora Microwave - door falling apart: This microwave is supposed to be installed above a range. The materials are not suited to this. The plastic door has disintegrated. We have got through 2 handles. I took the 2nd one off to replace it and the plastic that holds the glass in place just disintegrated onto the floor along with much other plastic parts. Why is the door plastic in the first place if they cannot make it from a heatproof material? Only 4 years old and we are going to have to junk it. When the first handle failed under warranty GE said that it was not covered as it is a plastic part! They finally covered it after a long conversation.

I purchased my new home equipped with all new G.E. Profile stainless appliances. Three years after that, our microwave (model number JE2160SFS01) had the magnetron go bad - no problem. I called G.E. and had a tech come out and replace it ($79.95). Great! 4 years later, it goes out again. But it’s still covered under warranty (cool). I call them, set up appointment, and ask what the charges will be - $79.95 home service fee. Fantastic! I schedule the appointment, and three days later, a technician comes to my home. I tell him it’s the magnetron, and he turns on the microwave for a second. He says yup and types his diagnosis into his laptop and prints out his estimate. He hands it to me, and it says “Total amount $ 270.10”! On a covered part!I asked him if he was joking, because the M.S.R.P. for that model, which I got from G.E., is... wait for it... $269.00 for the whole microwave oven! I threw the tech out and called their consumer advocate line (which took over an hour to talk to a human) and asked who sets their pricing for repairs, and was told their senior technicians set the labor charges! It’s a twenty-minute job! $190.00 for twenty minutes? So the tech left with $79.95 for doing absolutely nothing! Great job General Electric! I will never buy another product from you again! By the way, the magnetron they say is priced at $142.30 is available online for $97.50! It takes twenty minutes to replace, and a monkey can do it!

Now out of warranty, my 4-year-old microwave (sadly, the top oven of a double wall oven), has been flaking and peeling paint. It is totally unsafe and unusable.

Our microwave was manufactured in September 2010 and we purchased it in October 2010. It has been used a few times a week for reheating leftovers. I have owned secondhand microwaves and unknown brand microwaves, and they have been more reliable than the GE Profile. My husband and I invested in the Profile series when we remodeled our kitchen. After a lifetime of moving and living in homes with much to be desired kitchens, we decided to spend money to provide ourselves with a functional kitchen. If I had to do it all over again, I would have saved myself the trouble and purchased my appliances from another company.After having to call GE to send out a repair person 5 different times to work in our microwave oven, we are left with a nonworking microwave oven. It seems that a company that has made record profits from their faithful American fans could do the right thing and replace the microwave oven with something that works. Perhaps they do not have such a product. They have offered to let us buy a new one at a big discount, but they have not clarified what the percentage will be. The problem I have with this is that spending one more dollar on a product with no backing from the company it came from would be asking for more let down. I believe Ill have this lemon removed and quit before I take on any more consumer letdowns.

I loaded and ran the GE Profile dishwasher in the evening. Later that evening, putrid odor of undetermined origin was noted in the house. I searched throughout house to find the cause, but it was not located. The next morning, the dishwasher was found to be extremely hot on the outer surface (door) and countertop. The heated dry light was on along with the start button, which would not reset or turn off. The unit had to be disconnected by turning the electrical breaker off. All contents were either melted or had a strange brown film, along with broken tines and melted silverware rack in the dishwasher. Even the water dispenser in the bottom of the dishwasher was melted or broken. A GE service representative was called and his report stated: Unit was left on for too long and heat caused excessive damage to the product. Due to excessive damage, unit is non-repairable. He shared with me he had never seen this much damage done to a dishwasher. I spoke to GE consumer advocates twice and their solution is to provide me a discounted price on a new appliance and the email address for formal complaints. When I inquired about if there had been resolution to the cause of this problem because I wanted to make a formal complaint, I was told there is not a safety issue with the heating unit. I then spoke to a GE resource person in recall and she shared with me that it is a known issue of overheating and destroying contents, but it has not caused a fire. Igniting a fire is a justification for a recall - can we not be proactive? This department is working with me and ensured that in newer models this potential hazard does not exist. But other consumers who have purchased in this model (PDW9280N20SS) should be aware of the potential fire hazard. Everything was very hot inside and out. Consequences: the 3-year-old dishwasher (that I use about once per week) was totally ruined and I inhaled potentially toxic fumes for over 8 hours.

We moved into our new manufactured home in May of 2013. That is the month our above range built-in GE microwave was installed. In October of 2013, one of my sons heated a frozen chicken cordon bleu serving for 3 minutes, 45 seconds, according to packaging directions. He said that some of the inside of his food was cool, so my other son put in his serving for four minutes, zero seconds. All of the packaging was removed and each serving was placed on a separate Corelle plate and covered with Glad microwave-safe plastic wrap. While heating the second serving, the microwave started on fire. Fortunately, my son extinguished the fire before it spread. The food did not combust. The fire seems to have started from the ceiling behind the fan. The entire inside of our microwave is clean except for the soot that billowed out from the center of the ceiling. When the service tech came, he scrubbed the soot off of the ceiling with some paper napkins (which he left inside of the unit) and said that the microwave was a total loss. He also said the fire was caused by misuse, because plastic wrap is not meant to be used in the microwave, therefore even though the fire happened within a year of purchase and installation, our warranty was void. I asked GE to get a second opinion and they agreed to send a third party servicer (A&E) who stood me up three times! I finally got to schedule a GE tech to come at the end of December and they sent the same guy who said the fire was our fault! He told me that he never said plastic wrap is not meant for the microwave, but that we are being dishonest because fires only start when the food is left in the microwave for too long. He accidentally let it slip that he is seeing the same problem with GE microwaves in a lot of new construction for student housing in Tallahassee. (We live 20 minutes south of there.) He attempted to recover GEs reputation afterward by saying that of course it was the students faults, too, for misusing the microwave units. Anyway, GE has graciously offered to sell us a new microwave at slight discount. Haha, no thank you!

One needs to be a contortionist to replace the under light bulbs on this microwave. It is a TERRIBLE design. Why werent the sockets placed so that the prong holes could be visible? One has to do a back-bend over the stove top and then the socket holes are still not visible. DO NOT BUY THIS MICROWAVE. DONT BUY THE STOVE EITHER. IT IS DANGEROUS. THE KNOBS TURN EASILY AND OPEN THE GAS.

Purchased a GE Profile (oven and microwave unit) for over $3000.00 seven years ago. The protective coating on the interior of the microwave completely wore off down to the metal under the wheels of the turntable. GE calls this minor chipping (which it is not), advises to stop using the product, and offers a $100.00 off a new GE unit because they cannot fix it. The product should be recalled, just like Honda did when their Pilots were peeling.

GE Cafe Series dishwasher model # CDW9380N20SS is a fire hazard. Three days ago, our GE Cafe Series dishwasher nearly caused a fire. If I had not been home that day, it surely would have. I ran the dishwasher as usual and went about my day several hours later. I detected a strange acrid smell and with my five-year-old who was ill and at home that day, discovered the dishwasher door was burning hot to the touch. I needed a potholder to open the door. Once opened, there was a blast of heat and smoke. I needed to use oven mitts to protect my hands from the heat to pull the racks out and handle the dishes. The heating element did not deactivate at the end of the cycle.If I had not been at home, the house would have been destroyed as all the plastic items on the top rack in the dishwasher melted. In addition the plastic parts of the lower rack, the wheels and their clips; the silverware holder; covers; the clips that hold the pot tins in place were destroyed, to the point that the majority of our silverware was coated with plastic. The plastic on the lower water dispenser has been demolished; it completely melted more than 50% of the plastic covering on the arm and is charred and burned. We are so lucky to still have a home!The door must be kept open. When the door is closed, the element super heats and presents a major fire hazard. We have noticed that there is a recall for similar models with plastic tubs, but ours has a stainless tub. GE needs to broaden the recall to include all these models. This is a serious issue that needs to be addressed immediately. Our GE Cafe Series dishwasher model #CDW9380N20SS was installed on October 1, 2008. I would not be surprised to find that parts from the recall in April 2008 were also used in the Cafe Series. I have discovered in the few days since the DW units malfunction that there are over 1000 complaints listed with similar, even identical complaints, on multiple internet sites with the same problems.

Over-the-range microwave failure (model JVM2052, manufactured Dec. 2010) was purchased and installed professionally in March 2011. Total cost is $546. First, the fan failed in about June 2012 and I thought I can live with this. In Sept. 2012, the unit failed, but the interior light and clock still work. I paid $97.00 for a service call from the dealer, and the tech said the power source failed(?). Estimated parts and labor for repair is $370. So, I will buy a new unit (not GE) and pay about $150 for delivery and installation and take away this GE unit. I live in Morris County, NJ and this is not a rural area! GE service rep whom I called said GE doesnt service this area and to look in the yellow pages for an authorized dealer. I called again and got the name and address of the president of GE Appliances, and I am going to write about this product.

GE over the stove microwave stainless Steel Adora made for Home Depot. It started to make a funny noise and then it wouldnt heat. I contacted GE about the problem. It would be $89.00 to come out and an additional $25 for the double wall oven that would not stop beeping and would not work at all. We purchased a GE double wall oven at the same time as the microwave. All of our appliances were purchased in 2006. All GE and we are worried they are all junk. My husband took it to an appliance repair place and they said the Magnatron and the diode went on the machine. They said it is basically junk! Disgusted. Dont buy GE. They make junk! I just had to dispose of this piece of trash!

We purchased a GE JVM6175EFES microwave oven in 2014 and are now on our 4th unit. When cooking food, condensation forms and drips down the wall behind the microwave. GE replaced it with another, but it was a rebuilt unit which when operated caused sparks and smelled of something electronic burning inside. So another unit was ordered and delivered damaged. Now after a year, the 4th unit is once again causing condensation on the back wall. GE has no answer or explanation for this problem and really doesnt seem to care. This is just one of several problems weve had with GE appliances. We also had to go thru 3 refrigerators to get one that was not damaged from the factory. We will be trying to replace the microwave with a different model, but doubt if GE will work with us to get this resolved as their customer service has been no help at all. DO NOT BUY GE appliances.

I purchased the model (PEM31SM1SS) GE Profile (Spacesaver oven) in November of 2008. Less than a year later, it overheated and failed. Since it was still under warranty, the repair was managed by the appliance vendor. The scorch mark on the rear wall of the oven was and is still there. During the past year, the paint on the interior roof began to bubble and peel. There is now a broad area of exposed metal and the paint around the interior door frame is also peeling. When I returned to my vendor, I was informed that several other customers had the same issue and was told to call GE. I also checked online and found many other complaints for the same thing.When contacted, GE offered me a $75 rebate voucher, applicable only if I buy another GE microwave. The current price for this model - the only one anywhere that fits the space - is $279. Even with the voucher, this is still a lot to pay for a product that has proved to be defective. GE does not appear to stand behind its products. It used to be a reliable company but given the issues Ive had with both this microwave and my expensive dishwasher, I will be looking elsewhere in the future.

Unit is only 7 years old and not greatly used (only two adults who dont use it much)… Purchased as part of package including GE refrigerator, range and dishwasher (already got rid of refrigerator, as parts kept breaking and unit had other chronic problems). I turned the microwave on to make popcorn - it immediately made a terrible noise and filled with smoke with an electrical smell. Unplugged the unit and contacted GE Repair. When I described what happened, I was transferred immediately to their safety unit because of the nature of the problem. A GE technician arrived today and almost immediately diagnosed the problem: a metal component that directs the waves of the microwave generation tube had burned out, and by federal regulation, he claimed, cannot be repaired - the whole appliance must be trashed and replaced. Once again, I have experienced GEs poorly engineered products that appear to be designed to fail in a relatively short time. Can you spell planned obsolescence? (No photo provided, as there is no external visual damage).

We purchased a black over the stove microwave from GE, the oven has great preset buttons and it extremely easy to use. It looks sleek and works great. The only issue we have had was a few months after purchase we tried to change the bulb for one of the lights and the entire mechanism crumbled and fell out so we only have one light now over the stove. Disappointing but everything else works great.

GE Profile Microwave/Convection Oven JVM1790WK, over the range unit, CAUGHT ON FIRE while microwaving water for coffee. One of the four prongs that holds the oven grid in place started flaming wildly and smoking after about one minute of microwaving. My whole kitchen has an acrid awful burning smell. This is my second unit for a small kitchen, and I will be lost without this. The first one I had the handle fell off. This one is too dangerous to use. These units cost $600!!! I cannot afford to replace one every few years. Maybe this model and brand is bad news?

JVM6175SFSS - I purchased this over the stove Micro in July 2014. When I cooked a potato or frozen meal it would sound like it was going to explode. Condensation drips down behind my stove and the window and door to it get all steamed up. The fan clears the door & window but is very loud and intrusive even on low. Besides that I have never needed to use a fan when I use the microwave. GE repair came and said there was nothing wrong with it. But after thinking about it, came back the next day and took it apart. The tech called GE engineers and described to their amazement the way the inside was made. They said no way. So the tech took pictures and emailed them to GE. They reviewed it and said thats the way it is. I wouldnt stand for that and called them again and told them that the bottom of the micro gets scalding hot. At that they changed it out.... for another one with the same problem. The wall behind the stove is getting ruined from vapor dripping and all the same problems exist. They will be coming again and I am going to insist they take back their junker and let me buy a safe microwave of another brand even though my other appliances match. I am sorry now that I bought my GE stove and refrigerator now because they match the micro.

We have had our GE Advantium for 4+ years and the paint has started to peel off the inside of the door. We have an extended warranty with Home Depot but they deem this a cosmetic issue which is not covered. The cost to replace the door (part only) is about $260. Not sure self-painting is safe. I read here that we are not alone in GE microwave paint peeling off inside their microwaves, in general. Has there been any recall or calls action against them for this shoddy product? We love having this microwave/oven but feel like we got hosed by GE and Home Depot.

We bought a GE dishwasher and a GE oven/micro combo. We were told that we would have them in a week but it took three and a half weeks to get them. The dishwasher was damaged/defective and did not work; water leaked all over the floor several times and dishes wouldnt wash. They would not replace the unit but insisted that they had to service it. A couple more weeks passed and the repairman had to return thrice to finally get it to work. The microwave had a bent door that did not lineup properly when closed. Again, another repair was scheduled and we had to experience another service call. I have never had a worse experience buying appliances than I had at Pacific Sales. Kwam, the manager does not return phone calls. He made promises of helping us with a discount because of our troubles but has not kept those promises. Their contract installers are inept and unkempt. My appliances do not seem new since they were repaired and the door on the microwave is still not lined up as a new unit should be.This experience was an unmitigated disaster that should not happen to any consumer. Never will I buy anything from Pacific Sales or their parent Best Buy again. These problems are created by their management and their management does not care.

I own a GE over the stove Microwave that spontaneously turned on while I was sleeping. Once the unit was running for a bit, it caught on fire. It melted thru the glass plate before I woke up and was able to remove power from the unit and stop the fire. To GEs credit, they did send a tech out to our place. The tech never did anything to find out what caused the problem. Instead he was just looking to see if the unit was salvageable. He condemned the unit, and GEs solution was a $25 rebate on the next one of their products I would purchase.The liability GE would have been up for if I were not home would have been astronomical. This appliance put my property and the life of my family and neighbors in danger. GEs inaction on this problem shows that they have no concern for the safety of the consumers that use their products. The HR response has been appalling.

We have a GE SpaceMaker JVM 239BV 001 over the range microwave purchased about 10 years ago. Within one year of installation the handle snapped - just as numerous people here have stated. I went to our local replacement parts store and was shocked that it cost $30 for a new handle. The sales person said if I were you I would by the lifetime warranty for an extra $3 because you will be back, I sell lots of these.

Our Profile over-the-range microwave failed after 2 years. (Warranty was for one year!) One day it suddenly died. The repairman ($100) said repeated twisting of the wire from the oven to the door (which contains all the electronics) is inevitable with opening and closing. The wire often breaks within its insulation: a bad design fault. No question of replacing the wire; we would have to order a new door, for nearly $400 plus $200 for installation, which requires 2 service technicians. This is more than the cost of a new OTR microwave. He advised us to get one with the controls beside, not in the door. Unfortunately GE is the only company that makes a microwave in the same colour as our range.

We built our house and purchased a NEW close out Advantium Microwave. Due to delays we were not able to get into the house and use the appliance until literally 1 month after the WTY expired. The KEYPAD is shorted. There are a number of these complaints for this microwave - so we arranged for service. $375 dollars later - it was ALMOST working and the repair service determined that a new keyboard would be needed. 5 mos later we are kindly asked to take a refund of our repair bill and forget the whole thing - the part is not available! REALLY?! $2000 for a microwave, and you dont even support it?! Last - LAST time I put trust in GE. SCB2000FBB 03

I bought a GE stainless steel over the range microwave vented oven in may of 2012. At 24 months, it caught on fire while cooking a bag of popcorn. Fire shot out of the side of the microwave. I shut it off but it still shoots fire out if you try to use. The warranty on this unit is one year. It is unrepairable.

Very heavy to mount above a stove, not enough watts. The model I have is 900 watts, too many options for cooking different foods, not many parts are available to make a repair on any of the GE microwaves, I would not recommend purchasing a GE.

In 2008, after waiting 30 years, we remodeled our kitchen using both a GE Range & GE OTR Microwave, model # JVM1850. Last week, it started making a loud noise when started and wont heat. From reading online it sounds like the magnetron went. Everything else, fan, turntable, lights inside and outside work, but wont heat. I called in for service to find that it would cost $89.95 to have them come out to diagnose it. Also read that a magnatron is between $150 - $200, and used to be warranted for 5 yrs. New GE microwaves only carry a 1 year total warranty. So they know they are supplying junk to us. Had to just bite the bullet and replace it. People cant afford for appliances to only last this long, at the price they are charging. I am not only upset at having to spend another $450 only 6 1/2 years later to replace a microwave that was lightly used, but GE has chosen to change the look as well, so it no longer will match the range it sits above. When I was remodeling, I read so much about matching appliances... not matched anymore. Totally disgusted.

We purchased a GE Profile dishwasher because our old one was recalled for fire hazard and we were offered a rebate on a new one, and told there was no fix for the old one. On the new Profile dishwasher, the water inlet valve stuck open and flooded our home. Tech said we may as well have had a hose on full blast all night. Word to the wise, do not turn your dishwasher on and go to bed or leave the house! 7 1/2 hours later we woke to a completely flooded downstairs. When we were researching whether or not there were other complaints on that model dishwasher, we noticed there had been a recall for fire hazard ON THE NEW DISHWASHER! Since this is located right under our bed, we were fortunate though not happy about the flood! We have exceeded the 40K mark in damages and the assessments and estimates are still coming in. We will never own another GE product, though we recently purchased a stove with a double oven which is thus far wonderful. GE has also recently been purchased by Electrolux. We chose a Bosch for our new dishwasher.

Our GE microwave/convection oven model number JES1290SK01 is making grinding noises and has caught fire once on the side panel. We have owned this microwave for only 4 years. It was a terrible investment. No wonder Obummer had to bail them out. That is the quality the unions are currently producing. It’s sad really...

I bought the GE microwave from a GE dealer. We were very impressed that it is also a convection oven. It bakes, microwaves and even toasts bread. The oven had not disappointed us any way. I would recommend it to anyone in the market for a microwave.

We purchased the entire line of slate/GE/Adora appliances from Home Depot 11 months ago. The fridge has required a service call for a VERY loud freezer. The microwave is fine. The stove/oven is fine. The dishwasher is a GIGANTIC piece of junk! 4 service calls and its still clunking, tapping, grinding and just extremely loud. VERY DISAPPOINTED!! We can only run it at night because of all the racket. The layout of the sections for dishes makes it totally useless inside. It doesnt clean. Soap residue is everywhere. My old DW was quieter and more efficient. *Insert sad face here.*

I purchased a GE microwave and had 3 different problem with it. They sent a service man out and he could not fix the problems. Now GE said they are closing the case even though they know I do not feel the problem has been fix. My other GE microwave, I really liked until it stopped working around 8 yrs old. This one is a piece of junk. It is an over the stove microwave so I cannot just take it back to the store. I would say GE has really gone downhill over the yrs. This will be the last GE product I ever buy.

GE Profile Microwave wall oven combo model PT970SOM1SS - We have a few years old unit very gently used. However, we now have the paint peeling and flaking from the top and back interior wall of the microwave. Some spots have bare metal exposed. Contacted GE and they told me there was no fix for it other than replacing the device. Now they cannot replace the Microwave alone. The whole unit has to be replaced at a cost of ~ $2800.00. This is ridiculous. There should be a recall as there are several other complaints about similar issues.

I had a GE microwave that matched the GE range that was already in my condo when I moved in. When the range died, I got a new, matching microwave too. I like the way it works, the controls are intuitive and its easy to clean. No complaints.

Today my GE black microwave with rack mounted above the stove, caught on fire by itself. My husband and I smelled a chemical like smoke. We went in the kitchen and we saw fire in the microwave. We put out the fire and was thankful that we were home. If we were not home our house would have burned to the ground. The microwave was not in use at the time of the fire. I plan to contact GE about this dangerous event. My asthma has gone crazy since this horrible situation happened. I just want to let people know that GE microwave will catch on fire without being in use.

I also bought a counter top GE microwave oven model jes1451dn1bb that turned itself on and then stated a vegetable sensor error. I did not trust it after this and when I plugged it back in, it stated a keyboard short had occurred and that I may need service. What I need is a non-GE microwave oven that works longer than 18 months. Prior to this machine, I had bought the same model back in 2003 and the same thing happened; The machine turned itself on and stated a popcorn sensor failed. This was back years ago and I complained to GE but never heard from them. This problem has been going on for years and they do not give a ** about the consumer who lives with this machine. I complained tonight about my second microwave and unless a miracle happens, I will never buy another GE product again in my life!

Very easy to clean. Also, very reliable product. Its a built in above the stove, various levels of cooking and I love the 30 sec button. Black turntable with built in clock. Ive owned several GE products and find them very easy to work and user friendly.

Touch pad on GE CAFE over the range microwave started failing within first 2-3 years. Now, 6 years later, it has completed failed. Repair part alone (not including service call) is almost $550.00. Pure junk...made in MALAYSIA!

I purchased the GE Spacemaker over the range microwave in 2006. It lasted 5 years with little use. It was the magnetron. It seemed to work fine, but wouldnt heat food. GE gave me a hard time to have the part shipped to me and said I would need GE, who charged $99 for just a visit, to install. I will never buy GE again. Products dont last and GE doesnt care to keep customers.

I was very impressed by the look of the GE over-the-range microwave oven but my impressed state faded not too long after I began using the oven. My typical usage ranges from heating something for 20 seconds to soups for three to four minutes. Within the first month of purchase, the paint on the floor of the oven was peeling off, exposing the metal color. I was only wiping/drying out the oven with a soft cloth, never using an abrasive product or cloth, so the peeling paint was only due to moisture. I have now owned the oven for just over 14 months and not only is the floor nearly completely devoid of the white painted surface but I just had a quick fire when thawing frozen onion chips for 10 seconds. My previous, much less expensive microwave lasted nearly 7 years, so its a shame that a supposedly better model cannot match the longevity of the GE model. Looks aside, I would not recommend a GE microwave oven to anyone looking for a new or replacement microwave.

My life partner/bf moved into a semi flipped 10 yr old home. Every single appliance required to be replaced, everything from refrigerator, stove/oven, to dishwasher. We researched every appliance we purchased, a lot of time and effort along with reviews from various reputable reviewers, pointed us to the GE GDT DISHWASHER. Who can go wrong with three tier washing amongst jetted water bottle washers?After a 1 1/2 yrs in the top spinner completely separated from its housing. We googled the problem, GE said it was a faulty design, yet no recall. The door lock began to fail, googled the repair fix, another fault design, yet again no recall. Upper plastic door trim broke in half, solution, replace the entire console. Guess what? My solution here on out is to not buy GE products. If two years is all you get with a GE product, I am out! Done with your products that once lasted 10 to 15 years. The fact that have to research another DISHWASHER, absolutely pisses me off. I dare you GE to win me back!

I have had the GE Profile for approximately 8 years with no Issues. I learn something new it will do every now and then I had no idea was possible. I stillHave not conquered the convection baking and that is my fault. I need to use it more often since it wouldn’t heat up kitchen like the range does especially these hot summer days in Texas.

I purchased a this GE Model CDT845P2NS1 on Oct 2, 2019 and the unit was received Oct 23, 2019. I installed the unit approx. 4 days after receipt and dishwasher functioned well until November 10th, 2020 when the unit failed to pump out the water. I contacted GE Service (MabeService) and was advised that the unit was not under warranty and as such I should contact a GE Canada authorized service centre.After several attempts to get someone to come to our location at Sharbot Lake we got hold of Capital Appliance Repair in Ottawa. They were not able to send a technician until November 18th. After diagnosing the problem the technician advised we needed a main control board and would have to order one and then come back to do the install of the control board. It is now February 21st 3 months after the visit and I’m being told that the part is backordered and they have no idea when it will become available. I’m extremely unhappy when you spend over $7,000.00 for a GE CAFÉ gas stove, Microwave, Refrigerator and dishwasher to find out you cannot get parts in a timely manner. As a customer of GE Canada I have had no help is solving my problem. It is not acceptable to have a 1 year old dishwasher that has failed, much less waiting for repair that has taken over 90 days to get repaired. DO NOT BUY!

I purchased the unit just over a year ago and it started beeping one night with error scroll speed and then key pad shorted. In the end to repair costs more than to replace, even though it is above stove mounted unit. Do not buy a GE Microwave. Especially model # JVM6172DF1WW.

We bought the countertop stainless steel microwave model JES1142SJ the end of 2010. Noticed a rust ring under the revolving paint about a month ago. The paint was chipped off and when I washed it with a dish cloth, more came off. It is getting worse. We didnt stop using it since it seems it is only coming off under the plate but is it safe to continue using? Could it catch fire? Is it putting bad things in the food we heat in it? Even though it is not an expensive microwave ($100-$125) it should not be rusting inside. It should last longer than 3 years!Sounds like GE will not back up their products since so many microwaves owners are complaining about the paint being inferior and flaking off. There should be a recall for this problem on all microwaves sold by GE. Complaints have been from countertop to the most expensive dual stoves! This is not acceptable and GE needs to step up and deal with the problem with their microwaves that they sell. I usually buy GE; but this is making me have 2nd thoughts and think that my ones I bought in 2010 will be the last purchased from GE.They did come out twice for my range when the oven stopped working at 2 years and one of the eye knobs to turn on and off needed to be replaced when it would not turn off. But a 2 year old stove should not have needed any repairs. I noticed a big difference in quality after I bought this new one when we moved. My old GE from 1996 is still my favorite one and is still working just fine in my sons house.

Two years ago, after owning a GE JVM1490 microwave-convection oven (over the stove) for three years, the door handle broke.Let me clarify that I worked for GE first as an engineer, later as manager, for 20 years including 6 in Major Appliances. I am ashamed of what I am reading how GE is treating customers today.I am perfectly capable of replacing the handle myself if I am provided the complete and correct assembly drawings and/or instructions. GE refused to provide me anything when I requested them. The scant drawings and instructions I found online are insufficient. As a matter of fact, the design is so poor that removing the internal bezel, which you must do to reach the handle fasteners, forces you to break the mounting tabs, requiring replacement of this part plus the handle. This was confirmed by the parts store I visited.However, even after removing the bezel, neither I nor another ex-GE appliance engineer could figure out the access to the fasteners. I have glued the handle three times using epoxy and Cyanoacrylate (super glue), but it has broken off a fourth time. I will figure out a way of fixing it before I pay GE close to $100 for both the handle and bezel. And if I replace the appliance, you can be sure it will not be GE.GE should be ashamed of the poor design and deplorable customer service they are giving now. How things have changed!My suggestion is that all with this problem post name and phone number of GE customer service personnel they spoke with.

GE profile microwave convection - over the gas range. Oven temperature does not heat up more than the 370 degree, even if its set to maximum (450 degree). I purchased 4 ovens in the past year, all have the same defect.

Last fall, we updated our kitchen counters to quartz, and the Jenn-Air to a GE induction cooktop. While it is indeed pricey, the joy of cooking is not overstated here. The quick heat up, the ease of controlling the heat more precisely, and the easy clean up makes this unit well worth it. I love it!

We have a GE Profile Microwave/Oven combo unit. The paint is flaking off inside the microwave. Most of the ceiling paint is gone, and the floor of the microwave is flaking. Because we have a combo microwave and oven, the entire unit must be replaced. Thats around $2400. We cannot match the color, because they dont make bisque appliances any more. GE customer service suggests we replace the microwave with a countertop model, leaving the dead microwave on the wall. This is unacceptable.

Have been trying to have repairs for new appliances less than year old since before May 20th. Have had cancelled appointments, service never showed, wrong parts etc. Went to consumer advocates for help, no help. Today my appointment was again cancelled and rescheduled to July 10th. About to have a stroke. Both ice makers dont work, yet I am not put ahead. Have to go back in line after GE cancels.Purchased microwave, double oven profile appliances, two dishwashers for which gasket fell off and dispenser for soap leaked, french door refrigerators, all stainless steel. I just got off phone with consumer advocates and again was told next date July 10th. And I do want an attorney to contact me. Thank you and I hope I get a response.

I had to place a new order for a trim kit for my new microwave oven since the original one did not fit. I was told it would be 5 days when I placed the order, then it was backordered for 5 days, then 7 more days and now 3 more days. When will I receive the product that I have paid for 3 weeks ago?

My experience with GE over range microwave oven as follows/ Unit Mod.JVM3160DF3WWW. Ser.#GH260692A, this unit was purchased April 2017, February 2019, unit began to disconnect itself during normal use. This was done by way of throwing 15 amp breaker. No satisfaction from GE, NO extended warranty purchased, guilty as charged, contacted elect. tech. No idea of problem, #2 elect. problem in door sensors of which there are numerous, notice black residue on duel latch on door caused by door latch device rubbing on unit latch receiver cost to discover which sensor cause and replace one or all 250.00.We have been limping along for two months with frequent trips to basement resetting breaker (which we had replaced) next move, purchase NEW MICROWAVE. Let me be very direct if we wanted JUNK we would buy Asian made, THAT being said, there will be NO...General Electric products in this house. This is our second GE product BUST, 100.00 advertised by manufacturer. Never delivered! But hey we are just small time consumers. What might else we expect.

GE built-in oven with microwave on top in white color, model no. JKP90CMICC. Microwaves outside door is peeling off in chunks. This is a manufacturer defect and I have contacted GE to see if they will stand behind their products quality and replace this door of the microwave. I have heard so many negative things about GE customer service so I dont have much hope but I have to pay to replace this poorly constructed door. I will never buy another GE product and I will spread the word on how they treat their customers. I will post again when and if I hear back from them.

I purchased a GE over-the-range microwave in 2008. After 3 years, the magnetron went out and the microwave stopped heating. I called GE repair, and they told me it would cost over $300 to fix - close to the cost of a new microwave. Stupidly, I bought another GE microwave in August 2011, model JVM1750DP1BB. In the one year Ive had it, it has broken 4 times. One time, it was the magnetron (seems like a common problem). Another time it was the motherboard. Another time, it was a bad wiring problem. Each time, I called the GE repair service, and it takes 1-2 weeks to get an appointment. Twice, they cancelled my appointment on the day because they overbooked. Given that I had to take time off work for the appointments, this is a huge inconvenience. I have been waiting over this last time for an appointment, after they again cancelled my scheduled appointment. GE makes a terrible product, and their repair service is a joke. I bought GE because I wanted to Buy American, but they have completely turned me off. Think twice about buying GE! You will waste lots of time and money.

My GE microwave works perfectly for microwaving and baking. It is also a convection oven and it works as well for baking as the microwave component does for microwaving. It is roomy and accommodating. Ive had the microwave for 10 years and have never had a problem with it.

Microwave and convection oven together...perfect for heating food or baking. Very easy to operate. G.E.profile. Mounts over the stove with an exhaust fan and lights. Also has a rotating plate in it to heat evenly.

I have an above range GE Microwave - it is not even 2 years old and it is done. I noticed the past few months it was not heating properly - it needed more time. This week it just blew out! NO more GE Microwaves. I have a refrigerator and I am wondering how long that will last. Thank you!

We had some oil spill in the oven, which proceeded to catch fire. It was a huge fire that burned for a while. But all it took was a little oven cleaner, and it looks like nothing ever happened! The coating and materials inside of the oven are completely fine. It also still works perfectly! I'm amazed. 10/10 stars.

I just remodeled my kitchen back in May of 2012. My wife and I started looking for the appliances and we decided to get the GE Cafe series set (dishwasher, cooktop, electric oven and microwave). Our microwave oven, model CVM1790SS1SS, developed a humming noise as soon as you closed the door. It does sound like the magnetron is on. To verify that, I filled a cup with cold water and I put it inside and closed the door without setting any cooking time. After three minutes, the water was too hot to touch. I called GE and told them that it was a fire hazard.They sent one of their technicians and he determined that it was not a fire hazard and if I wanted it fixed, I have to pay for it. How could he say its not? If I close the door, the oven is going to continue heating up until it burns itself and everything else around it. I am pissed at GE because this unit is barely one year old and expensive. This is a safety hazard and GE failed to acknowledge. Bottom line, Ill never buy GE again and will not recommend it to anyone.

I moved into our house about 27 years ago, and have had to replace every single appliance except the microwave. The oven, fridge, washer, dryer, dishwasher—all replaced at least one time over. But this 90s GE microwave keeps humming along. I really should replace it just because it is this awful off-white color and everything else in our kitchen is part of a beautiful stainless steel/black/white scheme, but it is actually built right into a cabinet and I fear I will not be able to get another microwave in there. The only gripe I have about its performance is the fan comes on and roars full-blast anytime the stove or oven is on. It is so loud its difficult to talk over.

First of all, I wish I had seen this site over two years ago and I wouldnt have purchased a GE product. But, that is spilled milk. My two year old microwave, GE 1750 over the range, started running on its own. I disconnected it and called GE and asked if they had experienced any problems with their product and if this was a fire hazard, the nice young lady put me on hold and did research and stated that no reports of a fire hazard or running on its own. My husband encouraged me to do my own research and guess what? shocking, I was lied to! There are reported fires on the news and a law firm has a class action lawsuit against GE! I guess because this appliance wasnt in the nice young ladys moms house it wasnt of importance to inform me of the fire hazard? GE is off of my list of products I would buy!

I purchased a new GE over the oven microwave to replace a 10-year old Spacemaker unit. After three weeks of use with no issues, the unit overheated excessively during a normal use. The heat was so intense that the pegs that hold the racks melted causing a severe burn on my sons thumb. I unplugged the unit fearing further injuries and/or fire. Are GE products manufactured poorly or did I get a lemon? Who knows? Anyone else have a similar issue? I am still waiting for GE to respond.

It is very quiet and does an excellent job cleaning. I really like the new slate finish on the front panel. It has a stainless effect but does not show marks as well as SS and is very easy to clean. Great design, the top rack is adjustable and the use of internal space was well thought out. Very simple / uncluttered and I like the control mounted on the top door feature. Dont recall the model number. The washer was in the $650 price range which is sort of in the middle but has a SS tub. In my opinion the performance and features are no less than more expensive brands / models.

We moved in to our home in 2006 and it had a GE Monogram Microwave built in. The microwave died and I purchased a similar GE Monogram microwave to match our kitchen in 2014. That microwave died exactly 17 months later. Fortunately, we had a home warranty program as we are selling our home. I figured that this saved me the effort to complain to GE about their product... Wrong. The Home Warranty program sent a repairman who said we can order a part. A few days later I received a call that they would replace the microwave. OK... I checked online as well as with a local retailer to see which model is the replacement model, and trim kit. Today (about 10 days after I first called for service) they delivered the new GE Monogram microwave and installed it. Fortunately, I asked to test it and we tried to boil a cup of water. The contents in the oven being cooked were not visible. Either the light was too dim or the shading on the door was too dark. I have never seen a Microwave where you could not view what is inside. I called GE Customer Service while the installers were there and they refused to allow me to keep it until a replacement was delivered. They had to deinstall it, re-install my old (non working unit) and take the new one back. I called GE with my homeowners claim info and they sent me back to the Homeowner Warranty company to start the claim all over. Ridiculous.Instead of a replacement they offered me a cash value which was 60% of what I paid the retailers. When I asked why that amount? They only provide the value based on what the Warranty company gets the products/services for (wholesale cost). Net: If I used the money to buy another product it would cost me out-of-pocket for replacement. I am hoping the new unit to be delivered in the next 3 days works better. Otherwise, GE has a significant design flaw that doesnt allow you to view what is cooking in the Microwave. If thats the case, why have a window at all? Fyi - My Panasonic Microwave in our basement is working fine.... and has for years.

We installed a GE Spacemaker Microwave Oven /Range Hood in 2005. We used it mainly for the overhead light over the range, the timer, the vent fan, and only occasionally to microwave vegetables. On 8/5/2011, I put a dish of eggplant in a glass dish to heat up and the microwave shut down completely to the point that I had to check the circuit breaker to see if the switch was shut off. The microwave and everything associated with it is dead.

I purchased a GE microwave from Best Buy about a year ago. Every time I wipe it clean, white paint chips come off the inside. This cannot be safe for me or my children. I did contact the company and they were of no help at all. They said that because I heat up liquids in the microwave, this will happen. Duh! I would not recommend purchasing a GE product of any kind (oven, fridge, etc). Their customer service is awful and their products do not last.

Microwave Model JVM1750DP2bb defective construction- Plastic is protruding inside the Oven. Took possession of a new home in January 2014, but only occupied part time. I estimate we had the equivalent of 6 months being occupied. In January 2017 the magnetron broke down, at which time I noticed a piece of plastics protruding inside the microwave through a vent hole on the Magnetron side. I did not take the extended warranty and GE only offered to send a repair man. Since this is an over the stove model venting outside, it had to be repaired or replaced. Checked with the supplier and they estimated a minimum of $ 300 repair cost. Home Depot had model JVM6175DKBB on sale for 249.00, and with delivery, and installation, were talking $ 350.00 to $400.00 to replace. I got in touch with GE Consumer Affairs, and they did eventually agree to provide the JVM6175DKBB for $ 270.00 including installation. They will take possession of the old model, so there wont be any way for me to confirm or deny a manufacturing defect.

We bought a model PVM9215SK3SS microwave as part of an over-the-range microwave oven/extractor fan combo. Unlike every other microwave combo weve ever had in our frequent moves, this microwave cannot run the kitchen timer independently of the microwave. If you try to set the kitchen timer when the microwave is running, the cook-time changes and overcooks whats in the microwave. If you try to set the microwave to cook while the timer is timing a food cooking on the range, it simply refuses to work. The instructions are very hard to both find and then understand, having been written in China to cover many different models. Apparently I can ask my phone to turn it on. I sure cant manage that very often in person! The fan is too loud for comfortable use even at the lowest speed, which is a great disappointment. A former Profile model was very quiet at every speed, and much more efficient. Were saving up for something that works.

Purchased all new GE appliances: oven, cooktop, refrigerator, dishwasher and microwave and can’t say enough goodness about all. I would recommend GE appliances to everyone. Prices were reasonable and delivery and hookup were done with ease and professionally.

I had my original microwave for 20+ years. I replaced it in 2009 with a GE Model HVM1540DN188. Started beeping in middle of night a week ago, with message keyboard shorted service needed. I unplugged several times and it would start coming on by itself. I cannot believe they dont warranty their shoddy keyboards. I am very angry. I think they should stand by and replace their keyboards free of charge since they are fully aware they are making deficient product. This is scary to have an appliance just start beeping and say shorted... luckily I had my original wired in microwave replaced and put in a plug in or I would have flipped out if I could not unplug it. I got this along with the GE stove... so far the stove is not beeping...

First of all we loved our GE microwave / convection oven for several years. We used both cooking methods with much satisfaction. Two months ago, the microwave started turning ON when we opened the door of the unit. I know this much be dangerous? Also, when using the convection oven, the microwave also operates, and ruins whatever I am baking. HELP!

I have a GE Profile model JT965SK4SS micro/oven combo. It came new with my new home. A couple years into it, the paint (lining) interior of the microwave start to bubble and peel and eventually started rusting. Had SEARS come out (warranty had expired) who contacted GE and they concluded it was only cosmetic that it doesnt affect the functioning of the microwave. Well, its gotten a LOT WORSE now, bubbled peeling paint all over inside, rust, exposed metal, and the paint is falling onto food. I can NOT even wipe out the interior to clean it, it makes more stuff come off/fall down. I called GE last week, was told by 2 employees that it is NOT safe to use anymore, discontinue use. I had SEARS come again (per GE). The tech said he had NEVER seen anything like it before. He called GE to tell them its not safe, exposed metal, and its dangerous. They again said, well maam, youve gotten 8 years use of it. We wont replace it, but will offer you a discount for a new one ($2,500 out of pocket for me). The person who had offered me the discount (yes, I sent pictures, showed how bad it is) also gave me a tip regarding the unit I have now with the exposed metal and the chance of arcing (spelled? like Ark) if the unit catches on fire, make sure not to open the doors, the fire should contain itself. 2 employees told me its not safe, a 3rd gave me helpful info for if/when it catches on fire... and yet, they still wont replace the unit... and do not stand behind their own products. I plan to go to our local news station, see if they can get anywhere with this, since they wont do anything. Patiently waiting and unable to afford a new unit.