Our GE Cafe Appliance package is less than 1year old and the convection/microwave door handle is wrinkling and peeling. I realize that weight may be a concern hence the plastic vs. metal handle due to the side hinge of micro but aluminum or other light metal would have made more sense. A service tech is coming out next week to replace the in warranty handle however this cost will be our responsible next year when this happens again. A light metal retrofit/recall seems to be the logical solution to remain customer centric and maintain GE loyalty. How this material choice error is handled by GE to ensure this problem does not repeat during the life of this appliance defines brand loyalty. Thank you for your consideration.

My microwave is 2 years old and stopped working on Thanksgiving Day. Customer service was very responsive to send out a repair person. There was a minimum $108 charge plus and time spent. It turned out to be a loose wire inside the machine and I was charged another $50 for him to tighten it. Machines should go longer than 2 years without a service call and I will buy the extended on any other GE I purchase.

The microwave is over the stove with a vent. It is about an 1100 w microwave. I just have to eat out a little bit more time here are the ones that are bigger. The price was right there and that I would’ve bought something else.

28 Inch Front Load Washer with 4.9 cu. ft. Capacity, 13 Wash Cycles, 1250 RPM, Steam Cycle, Steam Assist, Time Saver Option, Sanitize Cycle, Energy Star in White. Overall this machine is top of the line. Purchasing a home appliance is like purchasing a vehicle. I took my time and reviewed and compared before purchasing. About 3 months. I had just purchased a home and so you want an appliance that is going to last. It has a 10 year warranty. It has 3 color options. It's cosmetically attractive. It also is elevated which is a smart choice for a basement machine in case you have issues with water in your basement.

Our microwave was manufactured in September 2010 and we purchased it in October 2010. It has been used a few times a week for reheating leftovers. I have owned secondhand microwaves and unknown brand microwaves, and they have been more reliable than the GE Profile. My husband and I invested in the Profile series when we remodeled our kitchen. After a lifetime of moving and living in homes with much to be desired kitchens, we decided to spend money to provide ourselves with a functional kitchen. If I had to do it all over again, I would have saved myself the trouble and purchased my appliances from another company.After having to call GE to send out a repair person 5 different times to work in our microwave oven, we are left with a nonworking microwave oven. It seems that a company that has made record profits from their faithful American fans could do the right thing and replace the microwave oven with something that works. Perhaps they do not have such a product. They have offered to let us buy a new one at a big discount, but they have not clarified what the percentage will be. The problem I have with this is that spending one more dollar on a product with no backing from the company it came from would be asking for more let down. I believe Ill have this lemon removed and quit before I take on any more consumer letdowns.

My GE dishwasher was installed the first week of October, 2019. After 3 loads, the unit was no longer functioning properly. I called GE to set up a service appointment to get them to come look at the dishwasher. It ended up taking 3 different technicians, ordering 3 different parts, at 3 different appointments before the problem was fixed (or so I thought). By the time I was able to use my dishwasher again, it was already the end of December and my 30 day return window expired. It is now mid January and I am already having the same problem as before and having to go through the whole process again. Because the year warranty is only for repairs, they will not just replace the unit, and instead I will have to continue dealing with this nightmare. Obviously, I will just be replacing my unit on my own after this.... And it will not be with GE!

If you plan to use your dishes for food or drink or if your pets eat food from bowls, dont buy a GE dishwasher if you expect items to get clean. Seems entirely incapable of producing grit-free clean dishes. Is particularly noticeable on the glasses. And I clean the filters all the time (manual recommends periodically) and I am taking a break from cleaning said filters to tell the world that GE Dishwashers are junk.

I have two of these in my kitchen, just about 3 years old. They have NEVER dried the dishes and I have ALWAYS had to thoroughly wash the dishes because otherwise they dont get clean. One has completely quit working now.

It could clean better without pre-cleaning. Its necessary to pre-clean heavily dirty items. Works ok if dishes are just moderately dirty. Could also be quite a bit quieter. However it is about 15 years old and still running but sometimes motor freezes up if not run often.

I bought a GE Profile dishwasher 3 years ago. After two weeks it was broken. I called Mabe Appliances and they sent out a tech. He told me it was broken. When I called Mabe back the service people told me to read the manual...yes really. Finally after a lot arguing they replaced it. About a day after the 1 year warranty expired all but one of the cycles stopped working. I have to take it apart every 3 months to clean out the water output as its clogged and the water doesnt have any pressure and therefore does not clean the dishes. I got up this morning and the dishwasher was still running but there were no lights on the front of the unit. I turned it on around 8pm so it was running for 11 hours. When I opened the door it was apparent it had been stuck in the wash cycle the whole time. It is now completely dead. Nothing works. No lights. WHAT a piece of JUNK. How can GE put their name this crap? STAY AWAY FROM GE APPLIANCES. Spend a little more and get a Samsung or LG or Bosch.

I have a new house (2 years old so out of warranty) and the kitchen has GE appliances that I choose. I hate, hate, hate them all! I have had problems from the first week in our home with the stove, microwave, refrigerator and dishwasher. I am so sorry I choose this brand! Today my dishwasher (for the 3rd time) isnt working. GE wanted to send their tech in a week. Then another week to get a part. I am so frustrated that I said forget it and called a local repair company. This is Friday, they will be here on Monday. I spent 2 hours on the dishwasher today. They had to replace my refrigerator and cooktop. My microwave went out 5 days after we moved in. Took 2 weeks to get it fixed. DO NOT BUY GE!

In 2008, after waiting 30 years, we remodeled our kitchen using both a GE Range & GE OTR Microwave, model # JVM1850. Last week, it started making a loud noise when started and wont heat. From reading online it sounds like the magnetron went. Everything else, fan, turntable, lights inside and outside work, but wont heat. I called in for service to find that it would cost $89.95 to have them come out to diagnose it. Also read that a magnatron is between $150 - $200, and used to be warranted for 5 yrs. New GE microwaves only carry a 1 year total warranty. So they know they are supplying junk to us. Had to just bite the bullet and replace it. People cant afford for appliances to only last this long, at the price they are charging. I am not only upset at having to spend another $450 only 6 1/2 years later to replace a microwave that was lightly used, but GE has chosen to change the look as well, so it no longer will match the range it sits above. When I was remodeling, I read so much about matching appliances... not matched anymore. Totally disgusted.

A durable microwave. Our microwave has stood up to 13 years of pretty heavy use and all functions continue to perform as when new. Has turntable but would be nice if it had two shelves instead of one. Guess that has to do with the spacemaker size of this microwave.

GE Cafe Microwave CVM2072SM2SS - The touchpad stopped responding, like many other who have had this issue. GE would not give me a break on replacing the main and supporting circuit panel as suggested by the technician, so I had to pay out $500 on my own. After less than a year now the microwave wont heat. I liked the units looks and display but if it wont work, its useless.

This is my third microwave since 7/13. The first day I used it did not turn off, the fan and light stayed on so I returned it to H&R Greg drove to their warehouse and bought a new one. Six months later, doing the same thing, would start up by itself, very dangerous and not shut off. Had three different repairs on it three days from work!!! They came out a week ago, installed a brand new one, same model. Next day, doing same thing, started by itself. Now have to plug and unplug it for use. Now they are sending out a service call to look at it for what I told them whats wrong same as the others. The only good thing about the people at the service center have been great and the service people too. I just want this fixed. Model # jvm1750dp2WW Spacesaver.

I purchased my new home equipped with all new G.E. Profile stainless appliances. Three years after that, our microwave (model number JE2160SFS01) had the magnetron go bad - no problem. I called G.E. and had a tech come out and replace it ($79.95). Great! 4 years later, it goes out again. But it’s still covered under warranty (cool). I call them, set up appointment, and ask what the charges will be - $79.95 home service fee. Fantastic! I schedule the appointment, and three days later, a technician comes to my home. I tell him it’s the magnetron, and he turns on the microwave for a second. He says yup and types his diagnosis into his laptop and prints out his estimate. He hands it to me, and it says “Total amount $ 270.10”! On a covered part!I asked him if he was joking, because the M.S.R.P. for that model, which I got from G.E., is... wait for it... $269.00 for the whole microwave oven! I threw the tech out and called their consumer advocate line (which took over an hour to talk to a human) and asked who sets their pricing for repairs, and was told their senior technicians set the labor charges! It’s a twenty-minute job! $190.00 for twenty minutes? So the tech left with $79.95 for doing absolutely nothing! Great job General Electric! I will never buy another product from you again! By the way, the magnetron they say is priced at $142.30 is available online for $97.50! It takes twenty minutes to replace, and a monkey can do it!

Within a year and a half of buying a new construction condo, the GE microwave fan stopped working (used the condo for no more than 30 days). I read all these complaints and am not surprised. My experience with Kitchen Aid appliances (refrigerator, microwave all junk) is no different than this. If I were to replace any of my appliances, I will not buy an American brand because they are all made in some other country with very poor quality control for very high profit and low quality goals. No choice for now, other than to get it repaired. At least, it provides employment, but what a way to create employment. I would never work for such companies.

I know this commonplace complaint, like thousands before me, will head straight into the wind because the world just works in this way: technical support and repairs works as a profit center for a corporation. My GE Profile microwave abruptly failed out of warranty after years of use. The cause was due to a wire burning up inside that had not been loosely connected, said the GE technician, so this was an issue of inadequate quality--not bad enough to cause the microwave to fail quickly but enough to cause failure over time.After taking the microwave out of the built-in cabinet, it only took the technician about 5-8 seconds to find and diagnose the problem, several minutes to get the right part (a wire) from the truck, and a couple of minutes to fix it. The labor charge was $121 for about 7 minutes of repair work, to be liberal with time. (This charge is separate from the charge to come to our home and diagnose the problem.) This prorates to over $1,000/hour for a basic wiring change, which I think is exorbitant. I understand that the technician is a highly trained individual, but this is already reflected in the high labor rate.According to GE, the cost to replace the built-in microwave, which came with a matching stainless steel frame would be $550 if we wanted the new microwave to match the frame at least (but not necessarily the oven, stove, etc.). This is the kind of cost you dont think about when you buy a new home built with matching appliances--well, I didnt. Companies like GE can rationalize all they want about all the overhead associated with servicing a repair call. I can certainly grant them some leeway, but in the end, charging an extra 8 times more an already high labor rate given the time needed to fix the problem is simply price gouging a consumer who has no good recourse. (This is why I pretty much avoid repairing anything, except for my car. Its almost never worth it.)I recently had an experience with an experienced plumber charging an hourly rate of $150, prorated by and rounded up to half-hour increments of work, regardless of difficulty of work. Repairing an appliance should work the same way, and my GE bill would have been halved. Because of such profiteering, I will not consider purchasing a GE appliance in the future. I pray that this microwave doesnt break down again in the coming years due to some other problem. It would be a lot less expensive to just buy a non-matching portable microwave then for $100-$150 than to keep up appearances.To be fair, the woman who fielded my service call was courteous and empathetic. Because the microwave apparently had an electrical burning problem, she previously waived the diagnosis fee. Otherwise, my simple repair would have run several hundred dollars, more than the cost of the microwave. However, she was unwilling to reduce the labor charge, so based on how strongly I felt ripped off, I give GE a star rating overall.

Dishwasher has been running 3 hours and it still has not finished. It is the loudest dish washer I have ever owned and this is the 5th house I have owned. To top it off I just paid $270.00 for a GE professional to come to our house to troubleshoot our problems and it fix the issues. Guess what, problem not fixed and GE has my hard earned money. Thanks, GE.

I purchased a GE Profile stocks in 2007 and a GE microwave model JVM7195SK1SS purchased 12/30/16. We have replaced the knobs on the stove 2 times because of peeling in the past. Now we need to replace the microwave handle. The handles and knobs look like metal but they are cheaply made white plastic covered with a sharp silver coating that peels. It appears the knobs get overheated when the oven opens and the microwave handle from the steam when cooking on the stove. Last night I cut my hand on the handle! We reordered the faulty handle and now getting charge $100 from GE. The company should take responsibility for their poor design and replace it for free with a nonpeeling part. I know that we will get the same handle and won’t be able to use the burner below or hope that using the fan will keep it from cracking again. I would never recommend a GE product again.

Seems to be a lot of wasted space in this GE dishwasher. If it had a 3rd rack then I would rate it higher. The back has additional sprayers, but the sides do NOT. I would think that having sprayers all the way around would help with sanitation.

We purchased the following from GE: GE Profile refrigerator, dishwasher, microwave, oven and cooktop in 2006 (six years ago). Last six weeks, the refrigerator, dishwasher and cooktop broke! We have insurance through Assurant on the products since it was recommended. We purchased the insurance for repairs and parts. Refrigerator - the motherboard (if you have other words for this) went out (4 weeks for a part). Now it is fixed. Dishwasher PDW8280NSS - This was the final answer from GE Consumer Affairs:I do apologize for this entire experience. I will be more than happy to contact you today between the time frame of 02:30-04:45 PM CST. Any additional questions you may have, you can contact me quickest by email. Again, I do apologize and I will contact you later today to discuss further options available to you. At this time, being the part is not available, the best option would be to offer a prorate on this dishwasher for you in order to have a functioning dishwasher in your home. I do appreciate your patience in handling this matter and will most certainly speak with you this afternoon. Thank you. Really, I have a case manager? The products must be really ** good if you need this as a department. Everyone should rethink buying GE products. Never again. I am campaigning against them! I cant get the part on a six-year-old high-end dishwasher. We live in the US, dont we? This should be a class action suit!

Bought model DDT575SMFES less than a month ago (along with a new microwave, stove and fridge) from the Home Depot. When the appliances were delivered the stove had some flaws in it so it had to be replaced. The dishwasher is a whole other story. It worked fine for a week but now it takes forever to get it to turn on. We try and try but it just beeps and the light flashes. Once we do get it turned on to stops before completing the cycle. If it does run a full cycle the soap dispenser does not dispense the soap. I wish I would have looked at this site before purchasing these GE appliances. Total junk and will NEVER buy anything GE again if I can help it. No responses back from GE and from what I read dont expect much from them. Now we will not be able to match the Slate with another brand and are stuck here.

Ive had this dishwasher for about 3 1/2 years now, and never have I been so dissatisfied with a product. I gave a review then, was contacted by a GE rep, followed their guidelines, even had a GE rep come out and review the problems. We changed our hot water temp, when we did dishes (not during clothes washing), checked to make sure the blades are not hindered, changed soap to Finish Gel (works best), added rinse aid. There is just not enough water to rinse off the dishes. Period. I do not add more heat/dry, and use Sanitize and Steam 99% of the time.What happens is the food sticks to the dishes and melds into them, causing permanent discoloration. This is no pot scrubber. It does no scrubbing! I have to wash my pots every time after I clean them in the dishwasher even if I pre-scrub them clean before washing! Sometimes the food from other dishes or the soap dumps onto the clean pot and makes it dirty! There should be a lawsuit against this company for this product. Its horrible! BUYER BEWARE! This rating should really be a 0 (zero)! Sorry I am not submitting proof of purchase from that time. We remodeled our kitchen in 2012.

GE Triton XL dishwasher overheated for no reason and melted the inside components to the point they are scorched black. This dishwasher is worthless. There would have been a possible home fire if we were not at home at the time of incident.

One needs to be a contortionist to replace the under light bulbs on this microwave. It is a TERRIBLE design. Why werent the sockets placed so that the prong holes could be visible? One has to do a back-bend over the stove top and then the socket holes are still not visible. DO NOT BUY THIS MICROWAVE. DONT BUY THE STOVE EITHER. IT IS DANGEROUS. THE KNOBS TURN EASILY AND OPEN THE GAS.

Greetings fellow GE Appliances fans! I suppose youre all wondering why I gathered you here, so let me first say this wasnt Plan A, which was to give GE Appliances a quiet and fair opportunity to set things right. After all it is Easter and we should all be grateful for second chances or, in GEs case, fifth chances. Now about halfway through the below some of you are going to wonder why I didnt switch to another brand sooner, but Ive saved that answer for the end because, quite frankly, its the absolute best part of the story. And since most stories have a hero Ill tell you why The Home Depot, where we purchased the GE dishwasher, is the hero of this tale.On Feb 16, 2019 I purchased a new GE Dishwasher which was installed by GE. It subsequently overflowed causing approximately $18,000 in damage to the wood floors in our kitchen and our basement ceiling. GEs technician confirmed the cause was a defective factory drain pump and documented that GE was responsible for the damage. I was instructed to contact Sedgwick, their insurance claims administrator. Well have more on that later.On March 9 I received a 2nd GE dishwasher which also had the drain defect and subsequently overflowed and caused additional damage to our home. I hired an independent plumber who confirmed the installation and home plumbing were fine and that it was, in fact, a defect with the dishwasher. On March 15 I received a 3rd GE dishwasher, however it was damaged during shipment so GE was unable to install. On March 22 I received a 4th GE dishwasher which also had the drain defect, but we caught it in time to prevent another overflow.On April 3 I received a 5th (yes, 5th) dishwasher which worked once (or so we thought) but as it turned out also had the drain defect. We caught it in time to prevent another overflow. We also had an independent plumber confirm (again) there were no issues with the installation or our home plumbing. This included disconnecting the dishwasher drain hose from the garbage disposal and pointing it into a bucket. The dishwasher simply would not drain.At this point youre probably thinking how stupid it was for me to keep requesting replacements from GE and you would be correct...which brings me to my favorite part of the story. You see, even though GE refused to switch me to an entirely different GE model dishwasher line despite multiple requests, they promised to compensate us for our inconvenience which would take into account how long we went without a dishwasher (approaching two months now), how much work I missed (numerous vacation days) due to installation and repair appointments, and warned me that if I switched to another brand that their policy was to not compensate.I cant tell you how much they repeatedly emphasized the compensation aspect, so when we finally received what we thought was a working dishwasher I called to request compensation. Their offer was (drum roll...) $25.00. I literally laughed out loud (LLOLd). To be fair, after expressing some slight dissatisfaction with their offer, they raised it some but its not worthy of an additional drum roll.Fast forward to today (Apr 21, 2019) and we still have a defective GE dishwasher in our home and are still washing dishes by hand which, for a family of four, is no small daily task. GE was actually supposed to remove the dishwasher from our home yesterday, but arrived and said they couldnt because our replacement dishwasher (a Bosch...we gave up on GE) had not arrived. They already knew this before they came because: 1. We told them and; 2...wait for it...THEY were the ones supposed to deliver and install it. Weve been courteous, patient, and have done everything GE asked, but have been treated very poorly in return. I will say that most, but definitely not everyone I spoke with at GE Appliances, was polite however none of them seemed to be empowered to truly help us.As for Sedgwick (GEs insurance claims administrator): were still waiting for them to pay for the approximately $18,000 in damage to our home. Our wood floors are turning black and theres now a musty smell in our finished basement. Its been approximately 52 days and Im starting to doubt theyre ever going to pay for the damage to our familys home.Im sure some of you will say youve had GE products for years with no problems, so let me say that Im genuinely happy for you. We were, and somewhat reluctantly still are, a GE family. The last three custom homes weve built, including our current home, all had GE appliances by choice. But in the last five years weve had the original dishwasher in our brand new home break in just three years (heating element) which is what started this replacement debacle, the fan motor on our brand new refrigerator break in just four years costing us several hundred dollars in groceries and a $200 repair bill (and its starting to make the same loud noise again so may fail again soon), and a glass defect in the microwave within two years of purchase.As for the hero of this story, The Home Depot, I simply cant say enough good things about the store and their management team. Even though this was not their fault they apologized, agreed to switch us to another dishwasher brand, and paid the difference in price (even though we volunteered to pay the difference ourselves). They made it clear we were valued and said you are our customer and we are going to help you.GE must have known The Home Depot would do this, because GE is the one who told us to call and suggested The Home Depot might do something for us...something GE apparently wasnt willing to do themselves. For now it seems that GE Appliances not only mistreated our family, but The Home Depot as well. Im not suggesting that you should or should not buy GE appliances, but IF you do and IF its defective and IF it damages your home then buckle up. It may be a long, painful, and stressful ride with no end in sight.

I purchased this GE dishwasher May 2015 through Amazon. Immediately after installation I was having trouble where it kept beeping when I went to wash dishes. A repairman came out and said there was a recall on the control panel and he replaced - no charge. In July 2017 this dishwasher flooded onto my laminate floor. I found it in the morning when I woke up. An appliance repairman came out. Did not know why it flooded. No charge this time, but he made a few adjustments and it seemed fine. Then the bottom sprayer arm broke. The heat shields fell off and the arm melted. I had that replaced.Then the washer would not dry - no matter what I did. Repairman came out. He did not have access to the GE computer program but made some suggestions. No charge. Dishwasher seemed to dry better for two weeks. Then in August it flooded again. A repairman came out. Ran the dishwasher, but it did not flood, so he did not know what the problem was. This time charged me $60 and said call if it floods again. Obviously I am afraid to run the dishwasher at night or when I am away in case it floods again. Plus the dishwasher is not drying completely.I have contacted GE. Their response is: Normally we dont do this because your warranty has expired already; however, I have a bit of a soft spot and think some extra consideration is due. I did a lot of research and came up with a couple options to help you out: I realize this is not ideal but we can extend to you our discount into any new model if you find its not cost effective to repair. I found the 2017 comparable model for you. Really??? I dont want another GE. I want a refund as this is a piece of junk. Plus this kind person said it would only cost me $484 and I will have another warranty.

When I entered my home I notice the microwave door was open and light was on. I closed it and took packages to my room. When I entered the kitchen I seen flames coming from inside unit. I put out flames with a fire. The panel was off and microwave was empty. My son said he left the door open because when he closed it hummed. I am very blessed that my home or loss of life did not happen. I contacted GE to see if there was a recall and was offered a 20.00 discount. I really feel that this is a hazard waiting to happen.

After one repair to my 9 year old microwave we decided to replace it. I am so sorry I did! The old microwave had a stainless steel kit and was made with quality. The replacement is a piece of junk! The outer kit is plastic and shows fingerprints like crazy as well as the microwave itself! Im always wiping it off. The flimsy door button is impossible to open without pushing it ten times in the right spot! The door doesnt close easily either! The front of the microwave is warped and wavy! I hate it! The quality of your microwaves has dropped to zero!

I have a General Electric HVM1540DN1WW over the stove microwave that I have had. This month will be a year and a half. The oven stopped heating so being a DIY person, I pulled the oven out and took it to my workshop to see if it was something I could repair. Inside the front panel was a very helpful schematic of the whole oven. Using the troubleshooting step listed on the paper, I found that the Magnetron tube had gone out. So I went to my owners manual and found that the tube had a four-year warranty on it so I called General Electric consumer relations to have the part replaced. First I had to fight with them because they said it was only covered for a year. After about an hour and a half on the phone and giving her the publication number on the manual, she agreed that it was indeed covered for four years. So she said that she would replace the part and she would even send a technician out to install it at no charge. I was very happy at this point. She said that she would ship the part to me next day with UPS and the tech would be out the following day to replace it. So far so good, till the next day when the part did not arrive. I called back in to General Electric consumer relations and spoke with a man this time and he told me that she had canceled the order that is why I did not receive it, and he couldnt see why. So he looked at the comments she had made the day before and did see that she said she would replace it and send a tech. The tech was supposed to be here the next day and I had no part for him to install. The man said he would place the order and have it shipped to me by the next day no later than 10 a.m. and the tech would be here between 1 to 5 p.m. Great! Until the next day and again no part when they said it would be there. Again with the call only to find out that it was scheduled to arrive next day guaranteed by 7 p.m. The tech is supposed to be there with in the next few hours and I wouldnt have the part. I called Fed-Ex and sweet-talked the lady into getting a hold of her driver to see if she could get to me ASAP. Bingo, next thing you know I have the part, the tech calls and the part is replaced. Oh boy, the big gaping hole above my stove is finally going to be filled once again. (I promise I am coming to the end.) After reinstalling the oven, I found out that it was taking longer to heat than when I got it, and it has a brand new Magnetron in it.Again with the call to General Electric consumer relations to set up another tech to come out and check it out. So the following day, the same tech arrives and puts a cup of just barely cool water in it and puts it in for 30 seconds, pulls the water out and says it is working just like it is supposed to and leaves. Well, again I called General Electric consumer relations to let them know what has transpired, but this time I asked to speak with someone higher up the food chain. I then spoke to a lady and she said that she would set up another tech to come out and check it out, and if it resulted in the same way that she would replace the unit with a new one. The following day, the same tech calls me and said that the oven is working the best that it could so I should call back to consumer relations as he did and set it up for a new one to be sent in its place. So I called once again and was not able to speak with the same lady and the only thing she could do is send me a voucher for $250 laying around for a new oven, but I would have to purchase one and send the voucher in with the receipt to get a refund. I told her that I did not have a spare $250 dollars around to go buy a new oven and then wait for the refund to get to me. So I asked that she have the lady that said she would replace it to call me back to straighten this problem out. Finally the following week, the lady calls me back and said, This is the best that I can do, due to me voiding the warranty. I asked, What? She said that the tech that spoke with me said that because I had hard wired in the unit to the house wiring, it was receiving low voltage so she couldnt do any better than that. I told her that was the most asinine comment I have ever heard coming from a field tech and asked her whether he went to a school backyard Techs-r-Us. I asked if she would have the tech call me to explain. I also gave her some friendly advice that she should not use that comment to anyone else for fear of someone laughing at her. We agreed to have the voucher sent if that was the best she could do. I will not buy another GE appliance again! I have purposely not mentioned anyones name because it was the experience, not the person that I spoke with.

Microwave oven, model # WES1450DN1BB, manufacture date, April 2011 - Your customer service sucks! I called there 5 times today and was told my microwave oven has been recalled, yet no one knows! You dont have it listed on the recall or anything. Your Customer Advocate doesnt know its recalled but your Service Department knows and I was told by them that it says, Do not repair, return to the place of purchase. Yet, I called my place of purchase and they know nothing of it either, but are going to work with me the best they can! It was manufactured in April of 2011 and we bought it around July 2011 (we think it was around then). There are many complaints online about the same issues as we are having - paint all bubbled and peeled off the inside top, and smell of burning wires coming from under it! If something would have happened to someone in my family or to my home, you bet your ** I would have sued the pants off of your company! Someone needs to get their ** straight with what is going on in your company or you are going to have a lot of issues! I may bring it to a higher level just because I am so pissed off that no one was informed about this issue, and something very bad could have or still can happen to someone because they are not getting the information they need! Stop and think about it. Because of your companys lack of communication, someone could die! I am very pissed off!

I purchased the GE Caf Advantium Oven Model No. CSA1201RSS. This is supposed to be one of their top of the line Microwave/Speedcookers and at $699.00 it should be. Within the first few months with little use, it made a loud buzzing sound and it went dead as if the breaker tripped. It was under warranty and a GE tech came out and repaired it free.The problem was the Magnetron, a key component inside the unit. I was shocked to see that the Magnetron was made by LG. I bought a GE because I did not want an LG, but I ended up with a GE with LG parts. The unit worked for several months and now it will not heat anything. I have only had this unit for 13 or 14 months and it is broken for the second time. I called the 1-800-GE-CARES to learn that they do anything but care. They told me it was out of warranty, but the parts are covered.It will cost me $99.99 for the tech to come out plus the cost of labor to repair the unit, which varies based on what needs to be repaired. This is unacceptable. There is clearly something wrong with this unit. I have had microwaves last 10+ years with no issues, and one of them was a GE! I thought GE would stand behind their products better, especially since they can see I had prior problems with this unit. This is a $699.00 tin can.

I just remodeled my kitchen back in May of 2012. My wife and I started looking for the appliances and we decided to get the GE Cafe series set (dishwasher, cooktop, electric oven and microwave). Our microwave oven, model CVM1790SS1SS, developed a humming noise as soon as you closed the door. It does sound like the magnetron is on. To verify that, I filled a cup with cold water and I put it inside and closed the door without setting any cooking time. After three minutes, the water was too hot to touch. I called GE and told them that it was a fire hazard.They sent one of their technicians and he determined that it was not a fire hazard and if I wanted it fixed, I have to pay for it. How could he say its not? If I close the door, the oven is going to continue heating up until it burns itself and everything else around it. I am pissed at GE because this unit is barely one year old and expensive. This is a safety hazard and GE failed to acknowledge. Bottom line, Ill never buy GE again and will not recommend it to anyone.

I am using a GE Profile Spacemaker 2.0 microwave that is almost 8 years old. I loved using this microwave until the touchscreen cracked under normal usage. Has anyone else had this problem?

The protective lining inside the microwave is coming off in a number of areas and the metal is visible and rusted. Is it hazardous to use the oven which is otherwise working? I contacted the Consumer relations department of GE and was told that its not repairable and offered only $25 as rebate to buy another one from them or any other retail store. I visited a couple of merchants, online and in their store, shopping for a similar product and got a price range between $250-450 plus $110 installation fee for a similar OTC microwave oven. We have all other appliances at home from GE and this does not give a good confidence about the products from GE.

I have to agree with other post about the customer service. Our dishwasher is only 15 months old. First call went fine after that everything is with email. Tried calling several times to get correct parts shipped after only getting one of three needed, I called and finally after 45 minutes an agent answered. After several attempts to get recommended parts and repairs we are now having additional issues. The quality of the GE brand has really gone down compared to our older products that lasted 15+ years. Now waiting for a new assessment of what the issue might be and hopefully will be able to get the parts without issue.

Renovated the kitchen and installed a new microwave. 2 adults in the house. First one lasted 4 1/2 years, too much to repair so bought another one. Because of the configuration of the cabinets we were limited to this dimension of microwave. Second microwave lasted 22 months, too expensive to repair. Now into our 3rd microwave. What has happened to quality products??? Everything now is chinese junk. So much for general electric formerly known for good quality, long lasting appliances.

On 05/20/2014, our GE microwave over the stove unit burst into flames. My wife was using timer and walked away then turned around and heard the microwave fan start (spontaneously). Then she observed flames/smoke reflected in the Microwave window. She observed the interior of the microwave was aflame. The fire was extinguished with a rag & water. The burning items appeared to be plastic/insulation. The fan from the microwave was with the burning insulation on the rotating plate. Had this unit only 14 months during that time the microwave fan would turn itself on for 3 minutes and then turn off all by itself. Happened twice in 14 months. Glad we were at home and were able to extinguish the fire. Called Lennar the builder who put this unit in to take pictures and check electrical. Was told the GE unit was bad to call GE. I know this will be a hassle as others have had this same problem with not so good results.

I use my microwave for the usual: reheating, cooking small meals. Ive had it for several years with no problems. I would recommend it to anyone. I like it.

After heating some water in the microwave, I opened the door and removed the water. A few minutes later, I heard a noise and noticed the microwave was running and the control panel indicated it was off. I opened the door it turned off. Closed it and it was on. Smelled something burning electrical in nature. I had to kill the circuit breaker to turn it off. I opened the door and felt the inside of the microwave and it was extremely hot. I was concerned that it could result in a potential fire, I continually checked it until I felt it was cool.

I purchased the micro from Sears. This is the replacement for one that was provided by the builder. The G.E. now needs replacement. Will work for limited periods of time. I have used it more than my stove to cook chicken, beef and whole meals. I will be replacing it with a new G.E.. The current one has lasted more 10 years with very heavy use.

About a year and a half ago, I bought a GE Profile dishwasher from a very reputable local dealer. Within 3 months, the digital control panel failed. Because it was still under warranty, the dealer replaced the panel. It failed again. This time they made other adjustments, it continued to fail. Finally GE suggested that the dealer replace the entire door panel, which they did. It took the repairman a couple of hours to do so. Still didnt work. Finally GE declared the machine non repairable and replaced it. Unfortunately the men who replaced the dishwasher didnt install quite correctly because it leaks. I keep a plastic container under the front left corner to collect the water every time the dishwasher runs.But the story doesnt end there. This machine and the first one both include a sensor that apparently check for objects that obstruct the spray arms. I dont know because theres nothing that tells me why the machine is beeping when I attempt to start it. I check the spray arms, move dishes, try to start it again and still get the beeper. I have done this over and over and over again and still it beeps. I have essentially emptied the dishwasher and it still beeps. When it does run, I have to use the boost temp. option and the longest cycle available to get dishes, and I mean dishes, even passably clean. Forget pots and pans, or casseroles. So, if you own a GE dishwasher, I hope that you have the old fashioned dishpan and dryer rack handy. Bottom line, it doesnt clean well, leaks, and beeps every single time I try to start it. Buy something else.

GE Stainless steel dishwasher rust inside. Its more show than function. Size is great. GE stated in writing that this is normal for GE stainless steel appliances as GE stainless steel is not real stainless steel. Rust is not covered by GE warranty!

Microwave lasted 6 months, very light duty, burnt metal smell. Purchased from Walmart, they told us to contact GE. All GE could offer is a Good Will certificate which means, we have to go buy another GE microwave up to $155 in value. We pay taxes, shipping etc. Not really a customer-centric return policy for a lousy designed product made from cheap components in Asia. These microwaves are a piece of junk. This isnt the only complaint about this model of microwave. Others are experiencing the same problem all within the past 6 months. From March 2018 thru August. Stay away from these microwaves.

I cook a lot of popcorn in my microwave and it hasnt burn a bag yet. It warms food quickly. Also, it cooks bacon really good. But the best feature is the steam cleaner that saves me time. It steams for about 2-3 minutes then all I do wipe the steam off and its clean.

GE Dishwasher Model GLD7400R10BB - Remodeled my kitchen about 2 1/2 years ago and replaced all my appliances with GE appliances. I noticed that every now and then my dishwasher wasnt starting or running through a full cycle. I had called the GE repairman because my microwave was not heating up and asked him to take a look at my dishwasher as well. After hearing it was going to cost me $500.00 to fix my still under warranty microwave and the control board was no good and very expensive to replace because my one year warranty had past on my dishwasher, I will never invest in the money hog GE ever again! WARNING... DO NOT BUY GE!

Purchased a GE profile dishwasher two years ago. It stopped draining. After 4 service calls and $400 we had to buy a new dishwasher. Basically I threw $1000 down the drain. My recommendation is do not buy a GE dishwasher!!!

June 18, 2018 GE Spacesaver Microwave in use when there was a loud pop, heavy smoke boiled out of the unit and strong smells of wires burning was noted. On fixed income now what do I do? Understand my microwave has been reviewed by ConsumerAffairs for the same issue in the past. Whatever became of their investigation?

I purchased this GE Adora dishwasher about 3 years ago from Home Depot and it cost about $550 which I think should translate into a well made dishwasher. I only run it about twice a week so it gets low use. On inspection this month I noticed the racks were already starting to rust and that there was a tear in the door gasket. I called the 800 number for GE consumers and they told me they could order me the racks for $200 a piece and that they would send out a repairman for $139 plus the $40 part. This is more than the dishwasher cost. They also told me I should have purchased the extended warranty and that this particular dishwasher has only a one year warranty. What happened to GE? My family has GE refrigerators for years without an issue and my dishwasher is already exhibiting problems after 3 years.

Had model JES1460DS3BB less than 2 years. I started to smell burning plastic when using it. Research tells me the wiring is burning up. Im sick and tired of GE appliances. Ever since my GE toaster caught on fire in 1969 Ive had bad luck with GE. I gave the company another chance when I bought this microwave. I will never buy another GE appliance - large or small.

Does not clean well nor dry well even on the more powerful cycles. I rinse off all the food and if anything is accidentally missed, it just gets baked on. Very disappointing. Also much of the upper rack item remain very wet at the end of the cycle. Drying issues: I use the most powerful drying cycle option but contents remain wet at the end of the cycle, especially plastics and top rack utensils. Not just damp, but large drops of water remain. Cleaning issues: Even when I use the heavy cycle, unless I remove all traces of food from the contents, the food remains and worse, now baked on. This model has a sanitized cycle so basically I use this dishwasher to sanitize only rather than clean, dry and sanitize. Completely unacceptable.

It is a ten year old microwave and it works fine, looks dated and Ive never liked the start buttons location. We bought at the time of our kitchen remodel, good size and power for the money. Im sure newer models are just as good if not better.

We normally purchase LG appliances but this time we purchased a GE Profile induction range and GE Profile above range microwave oven. The relay went out on the microwave oven about six months after we got them. Their website for scheduling service is absolutely horrible and didn’t work multiple times and when I was finally able to schedule, it was two weeks out. I then called but was told I couldn’t get an earlier appointment. So we waited the two weeks, then they had to order the relay. GE waited until the part was delivered to us to schedule the return visit - over 2 1/2 weeks later! So at this point we are without our new microwave for over a month and a half. Moral of the story is never ever to tempted to buy from GE, LG appliances & cust service are great.

Needed to replace handle. Silver covering started to peel and actually got a splinter. Cheap plastic underneath covering. Called GE and while they did send out a replacement, I had to pay to have it installed. Instructions on internet were not helpful! Bill to replace was $142. Ouch. GE rep said they did not have prior complaints. I later Googled it and saw 1000 complaints!!!

Fact no. 1: On 02/25/07, I supplanted a burnt-out 12-year old Kenmore microwave oven. Regretfully, my replacement of choice is a GE JES1456WJ02 unit acquired at Home Depot in Cumberland. At that stage, my spouse was afflicted with an advanced case of Parkinsons disease, and eventually, I had her concerned caregiver reporting having found chips of paint spread on food extracted from the new oven. From that point onward, I established a close watch of the infamous appliance, after confirming that the chipping paint originated from the roof of the GE oven. But I withheld from filing a claim with GE at the time because my wifes health deterioration absorbed all my attention.Fact no. 2: But on 12/12/09, a couple of months after my beloved one passed away, I decided to take the oven to a Home Depot claim department where they immediately agreed to replace the defective unit for another one of similar characteristics. With a sigh of relief, thinking that I had taken care of the problem, my assumption was incorrect.Fact no. 3: Today, 10/28/11 in fact, I discovered chips of paint floating over a plate of soup extracted from the GE oven. I was aghast! I couldnt believe it! Still, further inspection determined that the lousy internal coat of paint is likewise peeling off from this monstrosity appliance manufactured by GE.

I had a problem with my GE Profile Dishwasher that I had for several years and I had it on factory warranty. However, the last time they came to repair, they did not have parts available to fix anymore. So, they recommended new one. I worked with Consumer dept and made arrangements to replace with one they recommended at $500+. After several efforts to get it delivered, it was and we began using. It is not a Profile like my old one and it does not have the additional washing, rinsing and drying cycles as the Profile. It is a flat out bottom line washer. No, sani clean etc.. We have used the machine about 4 times and each time we have to rewash several of the dishes and especially the silverware. This is the most disgusting piece of equipment I have ever used. My home is loaded with GE products from years ago, mostly the Profile series and I have been delighted with the products and service. This machine is a disaster. I cannot believe that GE has this on the market or maybe this is a machine they use to satisfy customers who may threaten to use someone elses. It was not free, as I say it cost over $500. The stores and onlines advertise better machines on sale for less. I have GE stock which I will sell. They are going down on Quality. Consequences: Stuck with poor machine that does not do job that I paid good money for. Really, GE, get yourself together. Product Model:GDF510PSD1SS.

The GE microwave model CJES1290Ml01 does not get used much, maybe 15 minutes per week. I have not even used convection oven or broiler part, so we could say very gently used. Sparks and grinding noise out of the magnetron tube area started recently and there is no metal in the microwave. It arcs like there is metal. There are not enough miles on this equipment to need replacement, but it is too expensive to fix. Im not happy with Walmart GE product. Did they cheap it up?

GE Profile microwave PNM1871SM1SS - After 5 years of intermittent use in our second home, the magnetron crapped out. Research finds this to be a chronic problem with them. GE has sold an inferior product & has no intention of making it right with consumers. GE can only fail in the marketplace, soon relegated to just another so-so company struggling to survive. Goodbye GE.

I like my microwave. It works alright but the fan on it is extremely noisy. This is the first GE microwave that is so noisy. Besides that it defrost food well, I like the different functions on this microwave. They work great.

Our GE microwave, manufactured in 2012, has been running fine, but the door handle has cracked on the bottom. Imagine my shock when I found the cheapest price for a PLASTIC handle was well over $100. How can this be?

We have a GE Advantium Microwave. It is our second model (we moved and left the first one behind). It is spacious, has an intuitive menu system, cooks extremely well, also includes a convection oven feature that we use to great advantage. The nicest microwave weve ever used (and weve used plenty of them).

We bought a GE dishwasher after owning a KitchenAid. The GE is quieter, washes better, takes longer, but it doesnt really matter. I use Quantum tablets and everything is always clean when we are done.

GE Profile Microwave/Convection Oven JVM1790WK, over the range unit, CAUGHT ON FIRE while microwaving water for coffee. One of the four prongs that holds the oven grid in place started flaming wildly and smoking after about one minute of microwaving. My whole kitchen has an acrid awful burning smell. This is my second unit for a small kitchen, and I will be lost without this. The first one I had the handle fell off. This one is too dangerous to use. These units cost $600!!! I cannot afford to replace one every few years. Maybe this model and brand is bad news?

We purchased a GE Profile dishwasher, model PDW9880J00ss, in July 2005, along with GE range, refrigerator and microwave oven. We have had nothing but trouble with them. Most currently, the power board did not shut off at the end of the cycle, overheated and melted the harness also. We were alerted when the odor of burnt plastic filled our home. It was fortunate that we were home and in the next room, or our house could have burned down.The dishwasher cannot be repaired. I will contact GE to see what, if anything they will do to compensate me, but I am not optimistic. I will never buy GL products again. I thought by buying top of the line products from a well-known manufacturer, I would have a quality product. I was totally wrong. Sometimes, you dont get what you pay for.

Bought a new GE dishwasher. Arm on top keeps falling off. Does not heat dry. Dishes do not come out clean. Had repair man out four times, still not fixed. GE junk, junk. Will never buy GE again.

The flat, firm-press keypad for microwaves just seems dated. Often they get worn out. However, all in all, it does what a microwave is supposed to do and does so efficiently. It’s not the most attractive microwave though.

I bought GE Microwave JES1139BL03 in 2011 and the white paint inside has been peeling off. I think it is defective because I have had other brands and none of them have done this. This microwave was manufactured February 2011.

It works great. My microwave is a small white one that has the power to heat or make a dinner. I enjoy using it. I just press how much time I need and the microwave turns on and it either warms up my meal or cooks it.

Negative 5 stars. I purchased a GE over the range microwave oven, JVM2052SN1SS, just over a year ago and had a service call to address a lack of exhaust about a month after my purchase. In summary, the tech said it would not function as a dedicated exhaust hood and nothing can be done. 14 months later, the key pad began malfunctioning. Also, the moisture sensor that the operation manual stated will automatically start the exhaust fan, never worked and every time we cook, moisture would build up between the glass on the microwave door.I called GE Consumer Relation today and they will not address this issue free of charge. I will not purchase another GE product because GE dont stand behind their products.

My dishwasher is doing the same thing as the recalled models. The GE Cafe model is not included in the recall. The dishwasher front, which is stainless steel, becomes so hot it burns to the touch and stays that way for hours. Burning smell in the kitchen! Cafe models need to be added to the recall!

Have had this microwave for about three years, no problems so far. White so it matches our other kitchen appliances. Good size for most uses and easy to clean.

I purchased a dishwasher and it doesnt clean all the dishes. They sent out a repairman on 4 different occasions (one came out twice) and each one gave a different reason why they think it wasnt working right (what we are doing wrong). Each time, we followed their directions and the machine still doesnt clean. A decision was made that they will not replace the dishwasher, but would offer us an extended warranty. I explained that an extended warranty is useless to me if the machine isnt working correctly now.

I purchased a full suite of GE Monogram Appliances about 5 years ago. All are fine except the microwave which was made in China. The back is rusting out, the inside is chipping at the door and moisture builds up in the door window. This progressive deterioration has taken place over the past 5 years. I paid $420 for the microwave plus $226 for the trim kit. Now, all GE wants to do is sell me a new unit and a new trim kit (will not fit old trim kit). I paid approximately $20,000 for the entire group. I bought GE because I trusted the name. Im stuck with GE if I want to match the remaining appliances. There are only two people living in this house so there is only minimal usage. To further complicate things, there is no serial number on the tag.

Microwave (over the stove model) is also supposed to be conventional oven, but does not do that well. Just use as microwave. As microwave, easy to use. Now 14 years old and still going strong, although a little dated in appearance. Grill cover looks like chrome, but made of plastic, and when I tried to remove it recently to change the filter, it broke and now has to be replaced. $180, but still cheaper than a new appliance. Wish we could get away from using plastic parts.

Hello to all reading this and considering purchasing a GE dishwasher or other appliance from them. Last June 27th we bought a new home which came with all GE appliances. In fact I have 2 of these dishwashers. Once in the basement (just for low usage) and another one in the kitchen. The first day the dishwasher in the kitchen did not work and they came out and replaced it. I have had 3 other service calls on this thing and now it does not clean. Six days before Thanksgiving. I called and the lady told me no service until November 30th is available. It does not work, the first time they came out it was for a leak, second time the pump was not working and the dishwasher was not draining and now it is not cleaning. It was almost as it was my fault. It is a dishwasher - you put the dishes in and then turn it on and they should come out clean. I should not have to rinse or do anything special to make it work. We spent over 1500 dollars on each of these dishwashers and now one if not working. I did not do anything other than turn it on and expect that it should clean.I was told that they would sell me another dishwasher at a discount. DO YOU REALLY THINK THAT I WOULD EVEN CONSIDER ANOTHER ONE?! A real company should replace this POS and give me another one for free and it has been 15 months and I have had 2 of them in my kitchen. I can tell you if you plan on purchasing look at KitchenAid they run forever without any problems. They also did a fantastic job of support (I had it for 6 years in one house with one repair, second house they never needed to come).

Beware of GEs scam! My new house came with a GE microwave oven model JVM1630. It no longer heats food so I called GE repair. Heres basically what they told me: It is likely the magnetron tube and it is still under warranty, so no charge to replace it but I would have to pay $99.95 for the repairman to come to my home to diagnose the problem. If I decided I didnt want to repair the microwave, I was offered a $100 coupon toward a new one but it had to be a GE and it had to be bought on their website only. If I decided to go ahead with the repairs, the $99.95 would be deducted from the bill and I would only have to pay for additional parts and labor. I repeatedly asked for a ball-park labor charge so I could make an informed decision as to whether it was cost effective to have the repairman come out or just get a brand new one elsewhere. The person on the repair line hung up on me! I called back and I was told the same thing; that no one could tell me what the labor cost estimate might be. I asked to talk to a supervisor and same story. I didnt schedule a repair because I was taking a long trip and wouldnt be using the microwave anyway. When I returned from my trip, I called GE repair and again they wouldnt give me a ball park figure. Frustrated, I decided to have the repairman just come out and repair the darn thing and an appointment was scheduled for the next Monday. I had to rearrange a Monday day trip to Wednesday and set the repair appointment. On Monday, it was starting to get late in the afternoon, so I called to find out if the guy was on his way. A recording said my call was noted and I would be receiving a follow-up call. About 10 minutes later, Kim in dispatch called to tell me she had to reschedule the repairman to Wednesday. I explained I already had an appointment on Wednesday. which was already changed because it conflicted with the repairman coming to my home. She told me the repairman couldnt come because his truck wasnt safe to drive so that whole day was shot. The appointment was rescheduled for Wednesday and I had to again reschedule my other trip. When the guy finally showed up on Wednesday, he told me to put a glass of water in the microwave and start it. Ten seconds later, he declared it to be the magnetron tube. He was at my house about 10 minutes, just long enough to take my $99.95 credit card payment and to give me an estimate of $246.90 to repair the microwave which included the free magnetron tube, a $20 part plus tax and labor. The estimate had instructions on how to get the $100 coupon if I decided to buy a new GE microwave, which he said is what most people do. He didnt seem like he came prepared to repair the microwave at all. I was so frustrated and already out the $99.95, so I told him to go ahead and repair it. He said I should call repair to schedule him to come back to repair it! I told him to just repair it now and he said he didnt think he had a magnetron tube in his truck. I asked him if he would go to the truck and check! He did, and nope, no tube and he left.I think this is a great scam GE and maybe others have going. Its entrapment. They get you to accept a repairman to come to your home and charge you nearly $100 for it, but give you a coupon for $100 for a new one but it has to be a GE and can only be bought from their website where they can go as high as $500 or $600. By the way, I got on the website to find a replacement. My model had been discontinued and the only one in my price range was also a discontinued model. They charge $75 to come out to install it and another $30 to take away your old one. I called local appliance stores to see if I could unload my old microwave for parts and they all said the same thing: stay away from GE products.

Our microwave came with the house so we didnt choose it. Ive had a bit of trouble with the rotating mechanism making knocking noises a few times which Ive been able to finesse by exploring troubleshooting online. Other than that its been dependable for 4 years.

My Quiet Power 3 model GLD4450N10CS didnt clean well from installation (July 2008). But I ran the heavy wash as the norm. And I never used heated dry in case I had to rewash any of the contents. I ran my dishwash last evening. I went out to dinner and returned to a burning smell in my house. I opened my dishwasher and smoke came out. The plastics were melted. The cabinet next to my dishwash smelt of burning as well. The detergent table sat partially dissolved on the bottom of the washer. It took 2 hours to cool down. My dishwasher no longer goes into a wash cycle (even after unplugging it overnight). I have left it unplugged as I feel it is no longer safe. GE says it is $80 for service plus parts. And they said that if I dont repair it, I get $100 certificate to use online to order another GE. Its not worth it and I am very upset. I replaced all my appliance in 2008 with GE. My dryer had to be repaired. My washer was a lemon and they swapped it out for a new model. And now my dishwasher died and almost burned my house down.

Our microwave is of poor quality. Unit failed completely after a couple of years in use, like many GE products. This GE unit had a large rotating platter and easy controls, but it just stopped operating one day. Nothing could get it going again, so we replaced it with a Samsung microwave which appears to function well (only a year into use, so no way to know yet) although platter is smaller and controls not as convenient.

We bought 6 new GE appliances when we purchased a new home. The reason: my husband worked for GE for 35 years and we wanted tell our friends how happy we are with them! Now, we are sorry we have to complain about the dishwasher (Model #GDWF160R1OSS). The only good thing about it is how quiet it is. We have tried many different soap products, a little soap, more soap, Rinse Aid, half clean or nearly clean dishes placed inside, only to have the glassware looking horrid, not clean and cloudy. Service man offered suggestions but none have worked. The stainless steel interior also looks horrid because of streaks. So much for energy efficiency when we have to wash all our glassware by hand to get the residue of soap off them. Another dishwasher we have had for 25 yrs. does an excellent job - so dont blame it on the phosphate removal from soap.

We purchased a new General Electric (GE) Adora microwave model DVM1850SM4SS from Home Depot for approximately $355.00 in 2010. It was manufactured in Malaysia and had been in use for 2 years and 9 months before the magnetron failed. I spoke with a GE Customer Care representative on two occasions, and she said that the best that GE could do was split the cost of parts and labor since the 1 year warranty had expired. We had not purchased the extended warranty believing at the time that a microwave generally lasts for many years, and GE had always made quality products and would stand behind them. I indicated that I wanted to have the problem properly diagnosed by the service rep recommended by GE before proceeding further. The 10-minute service call bill set us back approx. $100.00. It would cost at least another $170 to replace the magnetron if we used the service tech contracted by GE. For $270, I believe we could find a fairly nice new microwave. I looked at alternative options for repair or replacement, since I am rather partial to the looks of the over the range stainless steel Adora. The model we have is no longer manufactured, but GE now offers the 1.9 cu. ft. Adora that Home Depot sells for around $400.00. In my internet research, I noted several postings that indicated that due to the high voltage danger of the magnetron, only trained technicians should attempt repairs. After half a dozen calls, I fortunately learned of a Microwave Service Center close to our residence that could replace the magnetron. After taking it down from above the range, hauling it in for repair and paying the approx. $104.00 bill and hauling it back to our residence to mount on the wall, we have a microwave that should work for a while! Total cost including service call for diagnosis - $204.00. Considering that GE does not wish to stand behind the quality of their products, I would not be likely to purchase a GE product again.

Have a GE dishwasher put into operation June 2016 (new home). In Oct 2016 we noticed a leak and a serviceman came out and identified a loose soap dispenser - tightened it. Next time we used it, leaked as before. Same serviceman came again, this time replaced both the main seal & spinning water distribution wand assembly. Again, the unit leaked and on Dec 14th same serviceman replaced the soap dispenser. Before he got too far down the road, we called as the unit again leaked. He blamed it on excessive soap suds - which he removed manually. Following his departure, we again experienced a leak. Same serviceman returned on Dec 15th. After review, he advised us the DW would be replaced and we should get a call within 48 hrs to arrange. On Dec 17th (still no followup from GE) the DW leaked again - we video this time. On Dec 19th called customer relations and after much discussion it was apparent GE has NO CLUE what the heck they are doing. ONE MORE repair trip was scheduled - this time they would replace the inside and outside panel! We are fortunate to be retired otherwise this repair process would have cost us about $2000 so far! How idiotic is GE?? How much have they spent to avoid replacing this unit? Believe me this is the LAST GE appliance we buy from them. Dont know how they stay in business. We are awaiting the panel repair guy as of this writing. Will update once this service has been completed.

I had to place a new order for a trim kit for my new microwave oven since the original one did not fit. I was told it would be 5 days when I placed the order, then it was backordered for 5 days, then 7 more days and now 3 more days. When will I receive the product that I have paid for 3 weeks ago?

In 2008 I redid the entire kitchen and purchased all GE Profile stainless steel appliances thinking I was purchasing quality items. Well, it didnt take long before the dishwasher broke but it was fixed for free by GE under a recall. However, now the refrigerator has begun to leak under the right corner of the ice/water dispenser located on exterior of freezer door and the microwave touchpad has also failed as I need to press below the actual keys for it to work half the time. When I spoke with GE customer service they basically told me there was nothing they could do with the refrigerator, I would have to call a repairman and have it looked at or pay their $100 diagnosis fee.The microwave they told me had issues with that particular touchpad and had it broken within first 5 years they would have repaired it for free under their recall program. But since its 7 1/2 years old I would have to buy the touchpad which normally only lasts for 6 months to 1 year or buy a new GE microwave and they would offer a rebate. Im so unhappy with their customer service and poor reliability of their products that Ive passed on each offer as I dont want to contribute another penny to a company that in my opinion is unethical and has horrible reliability. 3 out of 4 of my fancy GE Profile stainless appliances have broken! Thats a 75% failure rate! No thanks, Ill buy elsewhere. No wonder they cant sell their appliance business and why the stock hasnt moved in years... Wake Up GE, do whats right for your customers!

I moved into our house about 27 years ago, and have had to replace every single appliance except the microwave. The oven, fridge, washer, dryer, dishwasher—all replaced at least one time over. But this 90s GE microwave keeps humming along. I really should replace it just because it is this awful off-white color and everything else in our kitchen is part of a beautiful stainless steel/black/white scheme, but it is actually built right into a cabinet and I fear I will not be able to get another microwave in there. The only gripe I have about its performance is the fan comes on and roars full-blast anytime the stove or oven is on. It is so loud its difficult to talk over.

I never imagined that a microwave in my new home would be rendered useless after 2.5 years. Like many of you, my control panel stopped working and the floor of the oven was extremely hot to touch. Heres the weird part. You can hit the number for timed cook, but youd have to let it heat the entire time. If you open the door, you cannot restart it. You have to unplug it to reset. Of course, I called GE customer service, who gave me the same spiel about $80 service call, plus repair and parts. Thanks to your candid remarks, I will not be purchasing another GE appliance.

Have been trying to have repairs for new appliances less than year old since before May 20th. Have had cancelled appointments, service never showed, wrong parts etc. Went to consumer advocates for help, no help. Today my appointment was again cancelled and rescheduled to July 10th. About to have a stroke. Both ice makers dont work, yet I am not put ahead. Have to go back in line after GE cancels.Purchased microwave, double oven profile appliances, two dishwashers for which gasket fell off and dispenser for soap leaked, french door refrigerators, all stainless steel. I just got off phone with consumer advocates and again was told next date July 10th. And I do want an attorney to contact me. Thank you and I hope I get a response.

Our new GE dishwasher is a disappointment. 1. There is water on the door after the dishes wash. 2. There is soap on the door after the dishes wash. 3. The silverware is often dirty after the dishes wash.I have observed the following: 1. The reason for the water is the silverware trays are made of plastic and do not dry. They should make them of coated wire like they used to. 2. The soap tray is often prevented from opening all the way by the silverware in the rack. They should re-design the bottom rack. 3. The silverware tray is too enclosed for good cleaning. It should be made of coated wire like they used to.

I have had 2 Profile dishwashers in the past 3 months. I have not been able to use either one. First one had a cracked tub and the replacement would not run. I tried for hours to contact GE customer service and was placed on hold for almost an hour before they closed for the day. Not only is this washer a piece of garbage, GE customer service is terrible. Do not and I will say this again do not but this product.

GE over the range microwave Model hvm1750DM1 WW - It’s just about 2 years old. It started making a grinding noise, then quit. No more GE for me.

I just built a new home and opted for all GE Slate appliances. No problems so far with microwave, fridge, and stove but the dishwasher has never once been dry or cleaned all dishes. We have had it a little over a month! Today when I went to run it, there was mold growing! I had a KitchenAid for 9 years and never once did any of this happen. From reading other complaints, it looks like Ill be living with this for some time. I will never purchase GE again.

This is a very nice brand of microwaves. Has easy touch from 30 sec to 10 mins. Meaning you touch start for the 30 sec and press 1 for one min - just hit start after. The only bad thing is the plastic coating over the buttons is starting to rip. Not a big deal just doesn’t look as nice.

I bought a GE profile dishwasher and 5 months later its leaking water. It was never very good at washing dishes and now its leaking. It is covered under the manufacturer warranty, however GE customer service is awful. We are approaching one month into not having a functional dishwasher and they still have not replaced it. Their communication is terrible. Stay away from GE.

Two years ago, after owning a GE JVM1490 microwave-convection oven (over the stove) for three years, the door handle broke.Let me clarify that I worked for GE first as an engineer, later as manager, for 20 years including 6 in Major Appliances. I am ashamed of what I am reading how GE is treating customers today.I am perfectly capable of replacing the handle myself if I am provided the complete and correct assembly drawings and/or instructions. GE refused to provide me anything when I requested them. The scant drawings and instructions I found online are insufficient. As a matter of fact, the design is so poor that removing the internal bezel, which you must do to reach the handle fasteners, forces you to break the mounting tabs, requiring replacement of this part plus the handle. This was confirmed by the parts store I visited.However, even after removing the bezel, neither I nor another ex-GE appliance engineer could figure out the access to the fasteners. I have glued the handle three times using epoxy and Cyanoacrylate (super glue), but it has broken off a fourth time. I will figure out a way of fixing it before I pay GE close to $100 for both the handle and bezel. And if I replace the appliance, you can be sure it will not be GE.GE should be ashamed of the poor design and deplorable customer service they are giving now. How things have changed!My suggestion is that all with this problem post name and phone number of GE customer service personnel they spoke with.

This is one hell of a dish washing machine. You really need to think about getting in on this thing at the ground level. You put the dishes in dirty and they come clean! Holy**!

After 22 months of use, the microwave stopped heating. Youll see the same problem all over the internet. Lights turn on, plate spins but no change at all in temperature. The repair call was estimated to cost more than the price of the microwave. Its almost like it was planned. Never buying a GE product again.

GE Stainless Steel Profile Dishwasher - My dishwasher is about 5 years old. Two years ago, we noticed that the gaskets, both around the tub and on the bottom of the door, were becoming gummy and rippling. We were hoping to make it another couple of years before buying a new dishwasher, but a couple of week ago, the top arm fell off because the gasket was so degraded. We ordered the appropriate parts and were only able to replace the top-arm gasket and the tub gasket. We had to call an authorized GE repairman, specifically RC Appliance in Sparks, NV. When he tried to get the gasket out, his hands turned black from the rubber. After about an hour of trying to get the new gasket installed, he had to use his pliers to crimp the gasket in place leaving large dents along the bottom edge of the door. He said the factory had crimped the old gasket in place at the factory from the other side. I am extremely unhappy about the workmanship and the fact that the gaskets did not last a reasonable time. I dont want to seek an attorney, but would rather GE contact me to discuss what must be done.

The microwave is large enough for a whole chicken and operates at both a high speed and good efficiency. Most items can be timed within minutes of properly prepared meals.

While the microwave works fine, as far as microwaves go; it does heat unevenly but eventually gets the job done, the interior is cracked and shows signs of rust and deterioration. I dont remember ever seeing this on in previously owned microwaves. I would only use it for basic heating and reheating.