My 5 years old over the range GE Microwave Oven in my old house had a keypad malfunction. I replaced that oven with a different brand. This time, my 2 years old GE profile microwave in my new house has the same keypad shorted like other users posted. I was hesitating to buy this brand at the time. But the look and match with other appliances, plus the good deal from vendor, I gave it another try. I made a terrible mistake. No more GE appliances for me.

G.E. Spacemaker over the stove microwave. This is my second microwave of this type in 14 years. The first one lasted only 5 years. Im satisfied with the product albeit the price tag is too high.

We bought a microwave oven (CVM1790SS2SS, ZA301193K) for our new house some 4.5 yers ago. The flimsy, but very shiny, metal cover on the door handle split and the resulting sharp, but hidden, edge cut my finger. We covered it up with scotch tape, and ordered a replacement for the handle. We paid GE $102 (other folk sell it for $76, as we later discovered). There were no useable installation instructions. Our extremely competent handyman could not figure out how to do it and called GE for help at 800 636-2005. He was rudely dismissed and was told to look for instructions on Youtube! He spent 2 hours to install the replacement part. The screws that came with it, were not quite right. Ill never buy another GE appliance in my life. The Item was ordered by Ellen ** (It was shipped on 1/17/2017).

I am very pleased with its functionality, its power and its appearance. I got it on sale so the price was good as well. I have had GE microwaves in the past and found them to be reliable appliances. I will most likely purchase another when the time comes to replace this one.

My GE over the range Microwave has broken about 4 times in a years time. My warranty company American Home Shield (AHS) has decided that instead of replacing this piece of garbage, its somehow worth it to keep on fixing it, which is apparently their MO for all their customers but I digress. After the latest breakdown (microwave lost power completely), I was referred by AHS to GE Appliance repair. Thus began the nightmare. The tech that showed up was incompetent at best. He showed up, looked at me, made a grouchy face and proceeded to walk in the kitchen with an attitude like he was doing us this massive favor. He opened the microwave door, closed it, opened his computer and ordered 10 (yes 10) different part. Again, he literally just opened and closed the door - did not disassemble to see what part was actually messed up. No diagnosis done of any kind. He scheduled to come out the week after that - didnt show up because I missed his phone call. Btw, I called him back pretty immediately and he didnt pick up. After being on hold for about 35 mins (which is clearly the GE standard hold time), they tell me the guy has left the area and they need to reschedule me for a week later. The day before the 2nd appointment, they called to reconfirm and then the morning of, I called, stayed on the standard 35-40 min hold and reconfirmed he was still coming and was told he was on his way. Well, the appointment time came and went and he failed to show up YET again so I called to ask wtf happened. They said he didnt come because I canceled the appointment thru an automated call. This time the idiot didnt call me like they always do. I asked for proof of this alleged automated call that was placed to me and they said no call record exist and so while it seemed like a system glitch, the tech already left the area and theyd need to reschedule it. I told them, No, thank you. Got a local repair company to come out the very next day. Turns out, out of the 10 parts that idiot tech had ordered, only 4 had arrived while the invoice still showed 10 being shipped. Let me clarify this: All these issues stem from GEs entire company: From manufacturing crappy products to HR hiring incompetent techs to customer service being absolutely nightmarish to supply chain not sending parts that are being ordered. And if you can somehow get their alleged consumer advocate department on the phone after a 40 min hold time, they dont give a crap either. All these employees MUST hate GE to drive customers away as far as possible. I own a business and I will never ever EVER buy GE again.

I know this commonplace complaint, like thousands before me, will head straight into the wind because the world just works in this way: technical support and repairs works as a profit center for a corporation. My GE Profile microwave abruptly failed out of warranty after years of use. The cause was due to a wire burning up inside that had not been loosely connected, said the GE technician, so this was an issue of inadequate quality--not bad enough to cause the microwave to fail quickly but enough to cause failure over time.After taking the microwave out of the built-in cabinet, it only took the technician about 5-8 seconds to find and diagnose the problem, several minutes to get the right part (a wire) from the truck, and a couple of minutes to fix it. The labor charge was $121 for about 7 minutes of repair work, to be liberal with time. (This charge is separate from the charge to come to our home and diagnose the problem.) This prorates to over $1,000/hour for a basic wiring change, which I think is exorbitant. I understand that the technician is a highly trained individual, but this is already reflected in the high labor rate.According to GE, the cost to replace the built-in microwave, which came with a matching stainless steel frame would be $550 if we wanted the new microwave to match the frame at least (but not necessarily the oven, stove, etc.). This is the kind of cost you dont think about when you buy a new home built with matching appliances--well, I didnt. Companies like GE can rationalize all they want about all the overhead associated with servicing a repair call. I can certainly grant them some leeway, but in the end, charging an extra 8 times more an already high labor rate given the time needed to fix the problem is simply price gouging a consumer who has no good recourse. (This is why I pretty much avoid repairing anything, except for my car. Its almost never worth it.)I recently had an experience with an experienced plumber charging an hourly rate of $150, prorated by and rounded up to half-hour increments of work, regardless of difficulty of work. Repairing an appliance should work the same way, and my GE bill would have been halved. Because of such profiteering, I will not consider purchasing a GE appliance in the future. I pray that this microwave doesnt break down again in the coming years due to some other problem. It would be a lot less expensive to just buy a non-matching portable microwave then for $100-$150 than to keep up appearances.To be fair, the woman who fielded my service call was courteous and empathetic. Because the microwave apparently had an electrical burning problem, she previously waived the diagnosis fee. Otherwise, my simple repair would have run several hundred dollars, more than the cost of the microwave. However, she was unwilling to reduce the labor charge, so based on how strongly I felt ripped off, I give GE a star rating overall.

Bought model DDT575SMFES less than a month ago (along with a new microwave, stove and fridge) from the Home Depot. When the appliances were delivered the stove had some flaws in it so it had to be replaced. The dishwasher is a whole other story. It worked fine for a week but now it takes forever to get it to turn on. We try and try but it just beeps and the light flashes. Once we do get it turned on to stops before completing the cycle. If it does run a full cycle the soap dispenser does not dispense the soap. I wish I would have looked at this site before purchasing these GE appliances. Total junk and will NEVER buy anything GE again if I can help it. No responses back from GE and from what I read dont expect much from them. Now we will not be able to match the Slate with another brand and are stuck here.

Touchpad for CVM2072SM2SS stopped working. This touchpad has been creating issues for the last couple of years. Few reconnection of wires got it working for the last few times and now it is completely broke. GE is not ready to help with fixing the issue. It wants to sell me another microwave CVM1750SHSS which seems to have similar issues (also the plastic handle for those microwaves seems to fall apart due to heat). In fact, the reviews for the whole range of GE Cafe series seems to be pretty bad. GE is not owning up the design issues. Too bad!

Similar to another comment, we bought the entire suite. Dishwasher cycle screen gone after five uses. Oven temp needs adjusting. For the quality we were sold, this is extremely disappointing. Bought extended warranty, thank God, so will see if it was worth it.

Have a six-year-old GE Tall Tub Café dishwasher (model#GHDT168V00SS) I purchased at Home Depot in Denver. Also purchased a 5 Year Extended Warranty that I assumed was through GEs Extended Warranty Opportunity. The dishwasher suddenly began leaking and ruined our hardwood floors (I know, wood floors in kitchen not good; tell that to the builder). I called GEs customer care number and basically talked to a scripted robot. You dont have a warranty through GE, its a third-part insurer such as Assurant, I was told. Not worth repairing, and the warranty expired a few months ago. I know parts wear out, but for heavens sake, cant they build a dishwasher that doesnt leak from the bottom, underneath the unit, where water will seep unbeknownst to people, eventually destroying the floor? Guess not. So, no more GE appliances EVER. PERIOD! Switched to Samsung, LG and Maytag. Now, gotta spend a couple grand ($2K+) to repair the hardwood floor.

I purchased a new GE over the oven microwave to replace a 10-year old Spacemaker unit. After three weeks of use with no issues, the unit overheated excessively during a normal use. The heat was so intense that the pegs that hold the racks melted causing a severe burn on my sons thumb. I unplugged the unit fearing further injuries and/or fire. Are GE products manufactured poorly or did I get a lemon? Who knows? Anyone else have a similar issue? I am still waiting for GE to respond.

After many searches trying to do due diligence, we bought a GE dishwasher online Nov 2014. It was delivered and installed two weeks later. The day (Saturday) after delivery we loaded it and started the cycle; water went in, the circulation pump started and then the machine stalled. The machine was reset pumped out, restarted but no further improvement.Called the GE service number and after a 20 minute wait was informed that a request would be placed to a local service company. Monday the local service company (30 miles away) called to inform us they had to reject the service request and that GE would set up another. Three days later GE was called again. They were unaware that the service request was rejected so had not attempted to find someone else. They could not get another company to respond and told us to arrange the service call ourselves, pay the bill and submit it to them.My wife and I are now wanting to return the machine but were informed we would have to go through the local Home Depot. They informed us that we would need to have GE arrange it. GE was called back and informed us that the dishwasher could not be returned as long as it could be repaired which leaves it to their discretion. The process to arrange these things took a long time, many delays and many phone calls back and forth to Home Depot and GE. The calls to GE often took 15 minutes to get someone who would forward the call to the service rep which placed back in another 15 minute queue. Do not believe that Home Depot will take returns. The advertising makes you believe they will take but they do not without GEs RGA which GE is reluctant to provide. Avoid GE. I am not the first to find out that GE warranty (one year) and service is poor and that they are more than willing to wait out the warranty to leave their customers with a possible lemon. Other dishwashers are available with 5 year warranties.

The GE dishwasher does a good job of cleaning the dishes however we have had to replace the door gasket on 2 occasions because of door leaks caused by the bottom tray catching on the gasket when pulling the tray out to load dishes and it pull the gasket off the door.

I was washing the inside of my microwave and noticed that paint was peeling off the top. It looked like paper. Reading the other comments on the same problem I knew it would do any good to contact GE. GE products have always been inferior to other brands in the market.

Bought dishwasher in 2016 for a vacation home. Used maybe 50 times, then door close sensor broke, replaced that and 2 months later, now board is no good. GE makes junk. Repairman also said that switch is known issue and they refuse to fix it. Never buying GE again.

I had to place a new order for a trim kit for my new microwave oven since the original one did not fit. I was told it would be 5 days when I placed the order, then it was backordered for 5 days, then 7 more days and now 3 more days. When will I receive the product that I have paid for 3 weeks ago?

If you plan to use your dishes for food or drink or if your pets eat food from bowls, dont buy a GE dishwasher if you expect items to get clean. Seems entirely incapable of producing grit-free clean dishes. Is particularly noticeable on the glasses. And I clean the filters all the time (manual recommends periodically) and I am taking a break from cleaning said filters to tell the world that GE Dishwashers are junk.

Reasonably priced. I dont cook in the microwave, however, I use it everyday. It has an up to date look and will match any kitchen. The GE brand has been around for years and remained a reliable appliance my family has relied on.

Had 2 G.E. microwaves make a loud popping sound (like a boom) while turned off and then they started smoking like crazy. 1 model #JVM1630BB004/ serial#MA9713685. The previous microwave was just thrown away. I didnt realize there was a problem with these G.E. microwaves, so I dont have the other model/serial #s. These are a real danger.

Microwave lasted 6 months, very light duty, burnt metal smell. Purchased from Walmart, they told us to contact GE. All GE could offer is a Good Will certificate which means, we have to go buy another GE microwave up to $155 in value. We pay taxes, shipping etc. Not really a customer-centric return policy for a lousy designed product made from cheap components in Asia. These microwaves are a piece of junk. This isnt the only complaint about this model of microwave. Others are experiencing the same problem all within the past 6 months. From March 2018 thru August. Stay away from these microwaves.

18 Dishwasher Model GSM1860VSS - Cleans terrifically but I have a problem with either a leak or steam which is running the front of my dishwasher and marking it. It seems to be leaking from the black panel across the top. If I check inside behind the black panel I can see marks where water has been running. Please let me know how to fix this. The dishwasher was bought in 2015 and have the receipt from Home Depot. Thanks.

We purchased a GE Profile Microwave with our GE Profile range in 2010. In 2016 we noticed an area on the bottom of the back wall that was peeling. It is in an area where nothing is rubbing or touching it. After taking photos and contacting GE customer service I was offered a discount on a replacement microwave. I expressed my concern that a new microwave might do the same thing--peel. I was told that the newer microwaves have a moisture resistant paint. The area that has peeled is much larger now than is shown in the attached photo taken in 2016. I expected my oven to last longer than 6 years; its a GE Profile and we take excellent care of our appliances.

It works great. My microwave is a small white one that has the power to heat or make a dinner. I enjoy using it. I just press how much time I need and the microwave turns on and it either warms up my meal or cooks it.

Bought a new GE dishwasher. Arm on top keeps falling off. Does not heat dry. Dishes do not come out clean. Had repair man out four times, still not fixed. GE junk, junk. Will never buy GE again.

GE dishwasher caught fire - not part of recall. I arrived home for lunch to find smoke alarm going off and kitchen hot and hazy. Determined it was dishwasher and opened to thick black smoke pouring out. Heat so extreme cups/dishes and racks and spinning thing on bottom had melted and adhered to elements, each other and bottom. Parts of the dishwasher itself are warped (steel!). Granite countertops too hot to touch and wood cabinetry surrounding it darkened. Dont know the extent of that damage yet. Thank GOD I came home for lunch- I normally do not. I truly believe our house would have been on fire.

Its an older Hotpoint, and the layout is fairly roomy for a dishwasher of its size. The last apartment I was in had a comparably sized dishwasher that had too many shelving elements that got in the way of being able to just shove some dishes in there. Ive discovered with this dishwasher I need to stick to powdered detergent because the Hotpoint doesnt fully dissolve tablets. It does a fine job overall, though.

Wife called me at work to tell me our house is filled with smoke. Our GE dishwasher caught on fire 20 mins after she did a load of dinner dishes. Thanks to my 10- and 4-year-old kids who were in the living room playing, when they smelled smoke, they quickly ran and got the fire extinguisher and yelled to my wife. They ran out of the house and called the FD. Their quick thinking prevented it from getting worse. While on the phone, I had her go and turn off the circuit breaker. We got lucky this time, someone was home...

I have a new GE profile model PDWT380VSS - Two in fact. The first one kept breaking glasses in the top rack. GE technicians could not find an answer so they replaced the Dishwasher. Now six months later its doing it again. This replaced a perfectly good, older model as part of a remodel. Theyll be sending another tech who I suspect will not have an answer. Any thoughts on what could be causing this or a way around it or is it to be expected? The first GE profile I had for several years with no such issues.

We have a lower end GE stainless steel model that came with the purchase of our new build home. The washer is just average and does not have a huge capacity. For only 2 people in the house it gets the job done in general.

I have to agree with other post about the customer service. Our dishwasher is only 15 months old. First call went fine after that everything is with email. Tried calling several times to get correct parts shipped after only getting one of three needed, I called and finally after 45 minutes an agent answered. After several attempts to get recommended parts and repairs we are now having additional issues. The quality of the GE brand has really gone down compared to our older products that lasted 15+ years. Now waiting for a new assessment of what the issue might be and hopefully will be able to get the parts without issue.

I bought GE Profile dishwasher (PDT750SSFSS) from Home Depot on Sept 2014. First week it had some drying issue and GE service technician told no issue with dishwasher. After 4 months, electronic control board stopped working and GE service technician replaced the board. It worked for about a month and again same control electronic board failed and need to be replaced by GE technician. Again within a week again board failed for 3rd time. This time I asked for a replacement from GE since same board failed 3 times but GE refused to replace and told they can only repair and cannot give a replacement of dishwasher. Again for 4th time same control board failed now and I have contacted Home Depot for help. I dont know what to do this time and I dont want to repair this dishwasher anymore. It is only June 2015 and it had been repaired for more than 4 times. Ill try through Home Depot to get a replacement, if not Im planning to go through consumer court and file case against GE Profile. I would appreciate if somebody can help in resolving this issue and you can contact me through my email.

My Quiet Power 3 model GLD4450N10CS didnt clean well from installation (July 2008). But I ran the heavy wash as the norm. And I never used heated dry in case I had to rewash any of the contents. I ran my dishwash last evening. I went out to dinner and returned to a burning smell in my house. I opened my dishwasher and smoke came out. The plastics were melted. The cabinet next to my dishwash smelt of burning as well. The detergent table sat partially dissolved on the bottom of the washer. It took 2 hours to cool down. My dishwasher no longer goes into a wash cycle (even after unplugging it overnight). I have left it unplugged as I feel it is no longer safe. GE says it is $80 for service plus parts. And they said that if I dont repair it, I get $100 certificate to use online to order another GE. Its not worth it and I am very upset. I replaced all my appliance in 2008 with GE. My dryer had to be repaired. My washer was a lemon and they swapped it out for a new model. And now my dishwasher died and almost burned my house down.

GE microwave oven (jes1651sj02) started to spark like lightning, which can be seen through the inside vent grid/grill located on the right. Sparks are seen just behind the waveguide cover where the magnetron is located. It seems to be a common problem with GE microwave ovens from what I have researched. The microwave has now stopped working and just makes an odd noise like groan or urrrrr. It’s just over 2 years old. Its a piece of **. It should last 10 years or more, like my last 2 have. I gave away our Sanyo because it wouldnt fit the decor of our new kitchen - wished I never had.

I am a licensed master plumber. I do a fair share of high end kitchen installs, I noticed that in the last 5 years that all GE dishwashers I installed had a whole lot of extra parts to be installed by the installer. For example. Today I uncrated and tried to roll a GE dishwasher I got 6 and a drip tray fell out. Then when I went to install the dishwasher in the cabinet I had to install 4 different rubber flanges. When I went to push the dishwasher in the flanges came loose and hindered the install. The the insulation jacket kept binding up. The last 10 of these GE dishwashers I have installed the dishwasher appears to be racked or not square. I had to tell the General Contractor that I dont want to install the GE dishwashers any more. Way too much trouble. I have much better luck and ease of installation with Miele and Bosch. The GE dishwasher are very frustrated to install. Bob Licensed Master Plumber since 1982Richmond VA

All GE kitchen appliances delivered on time, but the dishwasher has been a nightmare. Started leaking right away, called GE and they couldnt come back out for 3 whole days after installing it, which ended up being a work day - so had to miss work to wait all day when he didnt come until 5 pm. Tried to make us pay for the service - we havent even used the dishwasher and they think we are going to pay them to come out fix their mistake, also under a 1 year warranty. Tech guy came out ran some computer test - didnt even look at the dishwasher or underneath. Test was good, we asked him to stay a few extra minutes and he said thats not his job. Leaked again. GE argued that we didnt get it installed by them, which was a lie. Same tech guy came out again, on a workday Again so missed work - finally figured out what was wrong, ordered the part. The part wasnt coming in for another week. So we Waited Another week without a dishwasher.When that day came We again missed work because they said between 1-5 and didnt even show up. GE tried to say the part wasnt in but we were holding the part when we asked where they were. Infuriating at that point already missed so much work days and GE employees couldnt even do their job. GE rescheduled the appointment without even telling us. Had to wait another week until they finally came out and fixed the dishwasher. Now almost a month after they delivered the appliances, I received a charge and didnt not even email to let us know we were being charged. Horrible experience with GE and will never ever buy from them again.

I love the GE. I bought a GE dual fuel range about 3 years ago when my 6 yr old Frigidaire stove caught fire. Always wanted to cook with gas but have electric oven and broiler. It's also easy to clean the cooktop unlike older gas stoves. Love the big fast boiler eye.

I purchased new home with new GE appliances. The dishwasher from day one has been a problem. It constantly leaves water droplets inside on top, sides and door of dishwasher as well as all plastics are covered in water after even using heated drying selection. I was told after 2 visits by GE repair that it functions as designed. We have water softener, use rinse agent and quality dishwashing detergent, and the water temperature is within acceptable range.

We have had multiple service calls where the tech explains immediately that he knows what the problem is, where there is a very loud buzzing noise as if you were going to be shocked by the microwave if you touch it while it is running. Now after fixing this problem multiple times, having the display burn out, etc. tonight we find out the microwave is actually turning ON when you open the door! This is a severe safety hazard! The interlock is doing exactly the opposite of what it is supposed to do!

My husband and I replaced all the appliances in our new home 4 years ago with GE Profile double oven, cooktop and built in microwave. All the appliances are of poor quality and do not cook the way we are accustomed to. But the microwave has had a particularly bad history. Within one year, it completely quit working and we had to replace several fuses and a board. Over the past couple of months, the keypad continually quits working and we have to climb up on a stool, unplug the microwave to reset it. Only then will it work for us to heat something. However, the keypad does not accurately reflect the task we are trying to use. I have had many microwaves over the years and I have NEVER had to repair one before. This particular brand of microwave was produced in Malaysia in July 2008. Very, very poor quality. No resolve from GE or from Sears where we bought it. I am done with GE and with SEARS.

I bought a GE dishwasher model #GDF570SSJSS from Sears. It was delivered on Thursday, installed Friday (by myself and a daughter) and the first test run produced nasty, dirty dishes. It took 2 hours and 10 minutes for it to declare that the cycle was finished and the dishes were clean. Fortunately I did not opt for the drying cycle. Or else the nasty crud would have been baked on. I called GE service and they scheduled a Monday service call. Monday, a very nice man hooked the unit up to his computer and found nothing wrong. He then placed a plexiglass door on the unit so he could watch the cycle. He found that the connection to the upper arm was not attached. He snapped it into place and declared that it was fixed.While I watched through the plexiglass door I was appalled that the reason that the GE dishwashers are so quiet is that the washing spray is extremely gentle. The technician seemed very proud of how quiet the units are. I told him that I could get my dishes cleaner if I spread them on the lawn and used a water hose sprayer. He was not amused. I chatted with him and asked several questions and learned some interesting facts. The lower and upper spray arms and the top rain action do not all happen at once. First the lower arm sprays, the machine pauses, then the upper arm sprays, the machine pauses, then the top rain action happens. This cycles over and over until the machine thinks the dishes are clean. I asked why there wasnt a hurricane inside the unit scrubbing my dishes? He said that the motor is a DC motor, I asked how many volts, he said 12.After he left I filled the machine up with dishes I had saved over the weekend for the test. The machine ran for 2 hours + (I forgot to write down the start time). The end result was nasty, dirty dishes that I washed in the sink afterward. So the new dishwasher looks just like the old dishwasher but let me tell you, she is not happy at having the worthless piece of junk sitting nearby and doing nothing while she is sweating over a sink full of dishes. When Im not quite so angry in a few days I will have a conversation with Sears to try to resolve this.

We purchased 3 GE Profile Appliances when we remodeled our kitchen. It turns out that they are junk. The microwave and the refrigerator have had to be repaired several times and the dishwasher went downhill very fast and we had to replace it as it was not cleaning the dishes correctly. We now are living with a microwave that has peeling paint that I hope is not damaging our health that they would not do anything about. And a refrigerator that was repaired today at the cost of almost $400 and it still is not cooling down. So now I have to wait 48 hours for another service call. Dont buy GE unless you want Junk!

All I wanted to do was eat dinner with my husband and I wound up on the internet for an hour trying to figure out how to make our microwave work. There is some kind of thing that locks you out of using it. Very frustrating when you just want to eat dinner!! Nothing works and you have to google how do you unlock this piece of crap that you paid good money for and trusted the GE label. All we ever use is defrost food or time cook vegetables. If you want a complex computer, go for this thing. Otherwise, I suggest you go for a simpler microwave that you can depend on to work.

It is about six years old, great dishwasher. The bad part is the new detergent! GE profile, pre-rinse, preheat water, everything, including enough water. Hold everything, unfortunately, now aluminum must be hand washed. Good looking, curved front. Its great, I shudder to think what the new low water usage ones will be like. I HATE my new low water usage washing machine. I HATE the reformulated dishwasher detergent, can be used on anything aluminum, now I use lots more water hand washing all aluminum items!!!

2 year old GE ADORA dishwasher - I am so disturbed tonight after seeing what happened to the protection rubber that is on the exterior of my dishwasher. I decided to buy a new dishwasher because the bottom tray would not stop when pulled out at the correct stopping point. Today I got my new dishwasher installed and when the installers pulled the old one out I was shocked to see that the protectant that I would assume was placed to protect my house was melted all over my wall behind the dishwasher. WOW. Talk about a MAJOR fire hazard. Thank God my house didnt catch on fire because of this faulty equipment. Check out my pictures and you will see the pile of protectant that was under, on my wall, and behind the dishwasher once it was pulled out. Sincerely concerned.

My GE dishwasher was installed the first week of October, 2019. After 3 loads, the unit was no longer functioning properly. I called GE to set up a service appointment to get them to come look at the dishwasher. It ended up taking 3 different technicians, ordering 3 different parts, at 3 different appointments before the problem was fixed (or so I thought). By the time I was able to use my dishwasher again, it was already the end of December and my 30 day return window expired. It is now mid January and I am already having the same problem as before and having to go through the whole process again. Because the year warranty is only for repairs, they will not just replace the unit, and instead I will have to continue dealing with this nightmare. Obviously, I will just be replacing my unit on my own after this.... And it will not be with GE!

My dishwasher broke within warranty in April 2014. The warranty expired on April 29th, 2014. Every 2 weeks another part was ordered to the tune of 10 parts and 8 visits (unpaid work days for me). I have been in touch with consumer relations about this and I was told that this would go on forever until their techs deemed the dishwasher as unrepairable but as long as it is repairable, they will not exchange the machine. And now they are telling me (October) that I could have had another service provider fix it but I would have to pay for it because NOW it is out of warranty. I cant wait until I replace my GE refrigerator and my GE microwave because those are the last GE products that I will ever buy. I went out last month and bought another brand as I will never buy GE again. GE protocol I am told is what determines all that happened. I suggest you do the same. I am writing a long letter to GE just to get it off my chest. Nothing will be done because its another corporation all about the money!!!!

The microwave (JVM1860WF001) came with the new home. It quit working. It still turns on, but does not heat. After reading all the complaints, I will not go to the expense of fixing this microwave. I will buy another brand. Goodbye GE. It appears by the other complaints, that GE does not care.

We bought 3 GE Profile appliances in 2005 when we renovated our kitchen. We have not had much problem with the gas oven/range/stove. We have, however, had nothing but problems with the microwave (which I submitted a separate review for) and the dishwasher. Recently, a friend made some suggestions regarding the dishwasher. I then went online and watched some tutorials on troubleshooting my dishwasher problems. I tried all the new suggestions and the dishwasher worked OK the one or two times after that and then back to all the old problems: 1. We have to scour every dish until its nearly clean before loading (even though the instructions specifically stated no pre-rinsing necessary). 2. I am not sure the soap cup opens. The soap is always left caked in the cup resulting in running the dishwasher twice. We have tried all kinds of various soaps and they all do the same thing. The eco-friendly soaps are the worst. We strive to be eco-friendly, but how can we be if we are using the harshest soaps possible AND running our dishwasher twice?! Not to mention the pre-rinse scour and running water until it is 120 degrees prior to running.3. The dishwasher also leaks and is very noisy.I have read some other reviews on this product and realize our dishes are not always dry at the end. This is a non-issue for me. I dont care so much if the dishes are dry. I do prefer for them to be clean. Dishes are a task I do not prefer to do. It would be nice to have a functioning helper. I am grateful the thing hasnt caught on fire. I saw that this dishwasher currently sells for $800-$1,500. I cannot believe it. I wouldnt spend $100 on this piece of junk.

We purchased several new GE appliances in August of 2016 as part of a kitchen renovation. We bought the GE Cafe series dishwasher CDT865SSJOSS. Within two weeks of use, the display stopped working. It took 3 weeks to get a technician out to fix display. Approximately 6 months later, we noticed the dishes were not as clean. Two months later the water stopped draining. Called a technician in, he diagnosed a broken pump. Parts would take 3 weeks and he would be out a week later. We are now over a month without a working dishwasher. He “fixes” the pump but says it isn’t draining great because your hose from your disposal is plugged (this hose drains to the same place as the dishwasher). Hire a guy to unplug the drain ($140). It isn’t plugged. The whole house is clear. Have to Shopvac out the stagnant water from the dishwasher that smells like a corpse. Call our plumber to check the lines ($500). He discovers that the technician pushed in the washer and busted a line. We now have water damage through our floor and into a bedroom below. He confirms that the plumbing is all clear and also finds that the technician never reattached the pan to the bottom so water was hitting the sensor and activating the shut off for a leak. Plumber fixes plumbing wrecked by technician, dries the sensor and attaches the pan. He advises that we run several cycles to flush out the stagnant water. If water still is not draining after several cycles, he advised that the new pump was faulty. Plumber leaves. We get 10 minutes into a cycle and the dishwasher stops for a leak again. I called GE hoping they would stand behind their product that we have now had for 2 years and have used less than a year. GE does not stand behind their products. The only thing they will do is send out a technician that you have to pay $100 for and they can’t guarantee that you won’t get the same technician who has come out 3 times and cost us more money due to his negligence. In May, we will be putting their terrible product out on our curb for city wide garbage collection. You no longer get what you pay for with GE. Do not buy their products!

We recently purchased three GE Profile stainless steel appliances for our new home. The total was somewhere around $3500. Within two weeks our $1000 dishwasher would not work. It took FOUR service calls and THREE weeks for it to finally be repaired. Now our $2000 oven (traditional/convection) has stopped working and the oven light will not go off without us tripping the breaker. Service tech not available for 5 days. I am expecting the new micro to go out any day now. All of these appliances are less than two months old. We had GE builder grade appliances in our previous home that are still running strong after 16 years. That is the reason we went with GE again. However, after the above mentioned issues with our new GE appliances, I encourage anybody who reads this to NEVER, EVER BUY ANY GE PRODUCTS AGAIN.

We first noticed a problem with our two-year old dishwasher when the lower spray arm broke. Soon after, the door seals started to leak, and we noticed the seal at the bottom of the door had completely degraded becoming brittle and breaking off. Our warranty had expired, but I contacted Mabe. They agreed to replace the parts free of charge, which amounted to approximately $300. I expressed concern that the dishwasher may have been overheating, causing the above problems, but this wasnt given credence as the technician didnt speculate in his report on the cause of the damage.Within the next month, we had a massive water leak. Upon inspection, the dishwasher showed signs of extreme heat. The sound insulation had bubbled and melted off much of the exterior of the tub. The electrical supply cord had a scorch mark. Once again, Mabe was notified. After much negotiation, they agreed to refund the price of the dishwasher. Initially, they had offered a certificate valued at 50% of the cost of our dishwasher towards the purchase of another GE dishwasher. This offer was declined as we wont have another GE dishwasher in our home unless were convinced theres no fire hazard.There are significant repairs required to our home due to water damage but we consider ourselves lucky to have avoided a fire. GE has had problems with their dishwashers in the past which resulted in a massive recall. Its time for them to acknowledge that there is a problem with the Cafe line and take measures to rectify the problem before someone is injured.

My GE dishwasher has clean all my dishes. Not leaving a run or mist on no dish. I can set the time on when I want my dishes washed. The programming is out of this world! The cost is a great easy and inexpensive cost. My wife was very happy with the purchase. The buttons are not too big. Its very digital timing.

First of all we loved our GE microwave / convection oven for several years. We used both cooking methods with much satisfaction. Two months ago, the microwave started turning ON when we opened the door of the unit. I know this much be dangerous? Also, when using the convection oven, the microwave also operates, and ruins whatever I am baking. HELP!

A year after I got my GE dishwasher at Home Depot, it warped, protruded into room out of counter. GE tech fastened it into cabinet, agreed warped, said call co. Cust. Serv. Rude, said should have called while in warranty. Offered tiny discount to buy another for $400. Its worse each day.

I purchased the micro from Sears. This is the replacement for one that was provided by the builder. The G.E. now needs replacement. Will work for limited periods of time. I have used it more than my stove to cook chicken, beef and whole meals. I will be replacing it with a new G.E.. The current one has lasted more 10 years with very heavy use.

We have had this microwave GE JVM1631wb007 (2003) for a number of years installed above our stove. It was given to us by my husbands son so we did not have it registered with GE as owning it. However, I just sent an email to GE today asking for help as I find absolutely nothing on the internet about a scorched outside microwave door. We have had no issues with it whatsoever - until now. When we returned home from a one week vacation this past Sunday evening, we came home to a scorched OUTSIDE door on this microwave! The inside is fine. The two people who came into the house while we were gone said they did not use it but it is DEFINITELY scorched around the entire area on the outside around the screen area. I refuse to use it although my husband (who is an appliance repairman but does NOT work on microwaves) says its fine to use. Its not only hideous, it LOOKS unsafe to use. Im scared its going to catch on fire but my husband says dont worry and go ahead and use it! Im attaching a pic of it... Anyone else heard of this? Its not like we dont have the money to replace it. Im NOT going to touch the thing... You cant tell him anything. He thinks its fine. I need PROOF that this is dangerous to convince him... Please help before the house burns down!

I bought GE OTR microwave in December. It is exactly one month old now. My model no. is: 9195SVC. It looks good, but I find the fan very noisy, even when it is at low. My range hood which we had in the kitchen prior to this microwave was very quiet at low and only a bit noisy at high. I do not know if the noise is because I have steel exhaust pipes vented out. Rest is O.K. but given that others have reported problems in 1-2 months, I am still nervous.I bought this product at Sears with an extended warranty, which is some relief. However, when I was shopping for this at Home Depot, the salesperson told me these microwaves last only 4-5 years. One good thing about Sears extended warranty is that if it is not used over the five years, they refund the warranty payment (with taxes) in the form of a gift card and they were also cheaper than Home Depot.

I have the GE Monogram series dishwasher. This machine has some great features. It lights up when the door is open. It is the quietest dishwasher I have ever owned. The only negative that I see is, it is slightly small on the inside.

We bought a brand new GE dishwasher from our local hardware store on Black Friday. It was $600 dishwasher on sale. It was installed on December 5th, it broke on December 6th, and we had a repair man come out to take a look at it. To be fair, the local hardware store did ask if we wanted to replace (2 week wait time) or repair (2 day wait time) it. Since it was a bolt that was severed (by opening the door to the machine, mind you), we figured it would be an easy fix. The first technician who visited said, Yeah, its broken. I have to order a new bolt and then come back out in a week to fix it. And oh, by the way, Ill have to drill a new hole for it too. Thats when I called GE customer service to request a new product. But since my 48 hour window had passed, and we opted to have it fixed, it was keep it or ask our local hardware store to replace it at their expense. I bit the bullet and just had it repaired. Now, less than 2 months later, the technician has been at our house three times. He’s soon to have a fourth visit because we need a new dispense modulator. After speaking with customer service several more times, and with a not very nice lady in the Chairmans office, I still have a defective product. Oh, did I mention that Im paid hourly and have now taken off 13 hours? So what’s the use of that $600 dishwasher that we bought? Its been out of commission for more than 2 weeks, in less than 2 months, and has now cost us $900. Thanks, GE! We’re so glad to see you stand behind your product.

Purchased a black stainless steel microwave model JVM7195BLTS. When we opened the box we realized the handle finish was stainless steel and not black stainless steel as the rest of the unit. The website picture clearly shows a matching black stainless steel finish on the handle. Store was unaware of any problems and reordered another one. They claimed the GE rep said they had a problem with the handles on these units but didnt tell the retailers.

I have a GE Profile model JT965SK4SS micro/oven combo. It came new with my new home. A couple years into it, the paint (lining) interior of the microwave start to bubble and peel and eventually started rusting. Had SEARS come out (warranty had expired) who contacted GE and they concluded it was only cosmetic that it doesnt affect the functioning of the microwave. Well, its gotten a LOT WORSE now, bubbled peeling paint all over inside, rust, exposed metal, and the paint is falling onto food. I can NOT even wipe out the interior to clean it, it makes more stuff come off/fall down. I called GE last week, was told by 2 employees that it is NOT safe to use anymore, discontinue use. I had SEARS come again (per GE). The tech said he had NEVER seen anything like it before. He called GE to tell them its not safe, exposed metal, and its dangerous. They again said, well maam, youve gotten 8 years use of it. We wont replace it, but will offer you a discount for a new one ($2,500 out of pocket for me). The person who had offered me the discount (yes, I sent pictures, showed how bad it is) also gave me a tip regarding the unit I have now with the exposed metal and the chance of arcing (spelled? like Ark) if the unit catches on fire, make sure not to open the doors, the fire should contain itself. 2 employees told me its not safe, a 3rd gave me helpful info for if/when it catches on fire... and yet, they still wont replace the unit... and do not stand behind their own products. I plan to go to our local news station, see if they can get anywhere with this, since they wont do anything. Patiently waiting and unable to afford a new unit.

Our new GE dishwasher is a disappointment. 1. There is water on the door after the dishes wash. 2. There is soap on the door after the dishes wash. 3. The silverware is often dirty after the dishes wash.I have observed the following: 1. The reason for the water is the silverware trays are made of plastic and do not dry. They should make them of coated wire like they used to. 2. The soap tray is often prevented from opening all the way by the silverware in the rack. They should re-design the bottom rack. 3. The silverware tray is too enclosed for good cleaning. It should be made of coated wire like they used to.

My GE Profile dishwasher is now 4 years old and Ive put up with it not cleaning well. For the last 3 years, I get a cloudy gray film over the dishes and finally figured out what is happening!! There is a gray rubber/plastic border around the bottom screen piece that has all the holes in it and covers most of the bottom of the dishwasher. I gently scraped with my finger and lo and behold its like gray putty!! So, the whole border of this gray rubber/plastic is disintegrating!! I had a 4 year warranty from Sears and they sent out a repairman. He is just going to order that whole screen part and replace it. He scraped the rubber and it came off for him too!! He said he never saw that before. He said it is probably the fault of my detergent which comes from health food stores and NOT the Cascade that they promote. Anyway, now I know where the gray film is coming from... Weve probably been consuming this for 4 years, a little at a time (NOT GOOD)!!! Im not thrilled with Cascade either!! Probably my LAST GE product to buy!!

Cost of washer $749.95 plus 4-yr warranty, install and hoses, $273 equals $1,023 for this GE stainless interior tall tub dishwasher GLD8700N20BB that only lasted 6 years and 4 months. It wont run, wont fill with water, nothing. Six years. Time to buy again. My advice, buy a cheap one and replace it every 36 months and forget the extended warranty. Installed: Sept. 2009. Dead: Jan. 2016. This was a replacement to an LG dishwasher that completely flooded my kitchen and caused a total tear out of my kitchen, and my homeowners insurance took LG to court. That LG cost $42,000 for a new kitchen and months of contractors and work. Washing dishes by hand is looking better every day... Think about it.

The GE microwave we use is almost 17 years old and has never needed any repairs. It is everything you could want from a microwave.

The wheels to roll tray in and out comes off sometimes, other than its fine, average wash cycle. Doesnt really clean heavy food off dishes so have clean first then put in dishwasher.

GE appliances were installed in my new build home including a brand new, never used microwave. When we did our walkthroughs the microwave appeared to work (turned on, timer ran, etc.) but after signing we found out that the unit was a dud and the microwave emitter did not work so nothing was ever heated regardless of the run time. We have called GE several times only to get extremely rude and dismissive customer service reps (“Audrey” if that was even her real name). They refuse to replace a brand new unit that never worked and insist on trying to repair it, but we are also being told that this will take several trips as the technician will only first come to inspect it then a second trip will be needed to bring out the necessary parts (they don’t carry them in the truck because they are “fragile”). I’ll never be using a GE product again.

Just two years old, the interior paint in my GE Microwave JES1072SHSS started to peel. I called customer service, then emailed, learned that the paint peeling posed no health problem, then, as a gesture of goodwill, given a $75 rebate. I foolishly bought yet the same microwave today (and will return it) as I read here on this site: not only is it unsafe to use a microwave with peeling paint, GE had a class action suit over this very issue and never took responsibility for the health risks to loyal consumers. So it gets returned this week. But PLEASE BEWARE. Gosh, I really bought the goodwill - hook, line and sinker! Then I read all the complaints here - about peeling paint.

Purchased all new GE appliances: oven, cooktop, refrigerator, dishwasher and microwave and can’t say enough goodness about all. I would recommend GE appliances to everyone. Prices were reasonable and delivery and hookup were done with ease and professionally.

GE Profile microwave PNM1871SM1SS - After 5 years of intermittent use in our second home, the magnetron crapped out. Research finds this to be a chronic problem with them. GE has sold an inferior product & has no intention of making it right with consumers. GE can only fail in the marketplace, soon relegated to just another so-so company struggling to survive. Goodbye GE.

Bought a new GE microwave cafe series in May 2014. Within one month the handle which was not stainless steel started to peel and cut my wifes hand. GE sent a replacement new door for the unit that did not close. Then he had to transplant the handle from the new door to the old door. A month later the unit failed. A new replacement unit took 2 months to replace. It has worked 3-4 weeks and has also now totally failed. Our experience with GE CAFE microwave and GE service process is poor to miserable. I would not recommend this product or their service to anyone.

This GE Model JNM1541 is a 1500 watt, under counter microwave with quite a few features. It has plenty of cooking power and has not failed in its nearly 5 years of use. I have never used the included metal shelf.

I purchased this in Feb. 2013. Just before the 1 year warranty was up the control panel went out. They came and replaced it. Now just a little over a year of the replacement, the control panel went out again. Worst microwave hood fan Ive ever had.

Ive had a GE model #JKP68G microwave oven for the past 27 years!!! It has been absolutely fantastic!! I love GE products and how reliable they are. Theyre the best!

GE Microwave was making intermittent buzzing noise 1 month after purchase. Called GE & they said they could send a tech out to check it but if they didnt find anything I would be charged a service call. I stated it would only do it once in a while so was concerned it wouldnt do it when tech was here & I would be charged so I passed on the tech. Microwave continued to make noise periodically but seemed to get less as time went on. 1 year & 10 months later it started to sound like it was arcing & shut off. Again it was periodic. Called GE. They sent a tech out & it only shut off but no arcing sound or intermittent starting & stopping. Tech stated it probably was door micro switch, but when GE called me back they said he stated it probably was circuit board. Whatever the cause it is still what I would call arcing & going off & on.GE stated They could give me a discount on a new microwave which amounted to cost of $100.00 more than I paid for it in the first place.

This is what transpired on the with GE: I called GE Service because the Magnetron is defective. I had trouble talking to anyone because the Serial Number label on the unit is BLANK. Also, the unit is 9 years old. However, my owners manual reads additional nine-year limited warranty. The customer service rep said the additional warranty is 5 years and GE WILL NOT honor the GE printed manual I have. I was escalated to a supervisor and the first thing she asked for a Serial Number to schedule a service call. I said no, all I want is a new part and she responded cant do that and I cannot schedule a call without a serial number. Hello, the label is BLANK. We went back and forth, getting nowhere and I got angry (I hope can recover the call), she is an IDIOT!Well, opened up the unit and lo and behold it isnt a GE part. I got on eBay and purchased the DAEWOO part (the magnetron the microwave was built with) a lot cheaper and repaired the unit myself. Oh, she said you cant do that. Sounds like Big Brother is alive and well at GE. I dont expect a response since I have been dealt with by the most inhuman people at GE!

I bought this JVM1540SN1SS microwave just two years ago. From past five months, certain keys stopped working. Then today, it gives me error service may be required - keyboard shorted. Microwave is unusable at this point and out of warranty. But my previous microwaves worked for decade without any issues. This one broke in about 1.5 years. These microwaves are of bad quality. I think GE should recall these microwaves and get it fixed free of cost for consumers.

Model WES1130 GE Microwave - The entire interior of the microwave just started peeling off the coating/finish around 3 years after purchase. The turntable wheel guide path totally disintegrated the finish of the path. It still worked but was so unsightly and disgusting to look into the interior and possibly dangerous to eat anything that had been put inside to cook. I just got rid of it. I purchased another GE Model JES1460DSBB and it started malfunctioning after 3 weeks. I returned it and will not buy another GE product.

We purchased a new General Electric (GE) Adora microwave model DVM1850SM4SS from Home Depot for approximately $355.00 in 2010. It was manufactured in Malaysia and had been in use for 2 years and 9 months before the magnetron failed. I spoke with a GE Customer Care representative on two occasions, and she said that the best that GE could do was split the cost of parts and labor since the 1 year warranty had expired. We had not purchased the extended warranty believing at the time that a microwave generally lasts for many years, and GE had always made quality products and would stand behind them. I indicated that I wanted to have the problem properly diagnosed by the service rep recommended by GE before proceeding further. The 10-minute service call bill set us back approx. $100.00. It would cost at least another $170 to replace the magnetron if we used the service tech contracted by GE. For $270, I believe we could find a fairly nice new microwave. I looked at alternative options for repair or replacement, since I am rather partial to the looks of the over the range stainless steel Adora. The model we have is no longer manufactured, but GE now offers the 1.9 cu. ft. Adora that Home Depot sells for around $400.00. In my internet research, I noted several postings that indicated that due to the high voltage danger of the magnetron, only trained technicians should attempt repairs. After half a dozen calls, I fortunately learned of a Microwave Service Center close to our residence that could replace the magnetron. After taking it down from above the range, hauling it in for repair and paying the approx. $104.00 bill and hauling it back to our residence to mount on the wall, we have a microwave that should work for a while! Total cost including service call for diagnosis - $204.00. Considering that GE does not wish to stand behind the quality of their products, I would not be likely to purchase a GE product again.

Clean neat appearance over stove. Fast consistent heating. Easy heating options. Turntable on or off. Also, love the stove top light. Cost a bit more than I thought it would, but not much more than others.

Microwave (over the stove model) is also supposed to be conventional oven, but does not do that well. Just use as microwave. As microwave, easy to use. Now 14 years old and still going strong, although a little dated in appearance. Grill cover looks like chrome, but made of plastic, and when I tried to remove it recently to change the filter, it broke and now has to be replaced. $180, but still cheaper than a new appliance. Wish we could get away from using plastic parts.

Needing some type of warning to indicate a clog or break down. Cycle: Pots & pans; heavy wash; normal wash; light wash; hot start; high temp. wash; heated dry; energy saver; cycle on: plate warmer; start delay (hrs) off, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1; Hot start plate; Pots & pans start; heavy/normal; high wash; heated dry off-rinse only. The color fits my kitchen arrangement. Needs to have a better warranty coverage. Needs a longer warranty on the basic coverage. Do away with extended coverage. Offer all parts and full labor for a longer time.

My microwave on the inside paint start peeling off. I have this appliance 2 years, it has slowly been peeling since that time and now it has completely peeled and rusted on the inside. This WAS a gift. The outside looks great, the inside is so bad. The serial # is LT914637B model JES1451DN1BB manufactured in 2010, Made in Malaysia. Be Louisville ky 40225. Does the united States make anything except make us pay taxes. This is a piece of mess. The last 2 years my husband he suffered with LLC. Now I got to deal with this. Poor workmanship. I want GE to give me my money for the MW or total replace it. Rate 0.

I bought a GE microwave two years ago. The microwave stopped working and has a message that the keyboard shorted. I called GE and they are charging me $90 to send a technician, plus parts and labor. I paid $250 plus installation for the microwave. I will never buy GE products in my life. Do not recommend to anyone.

GE Cafe Series dishwasher model # CDW9380N20SS is a fire hazard. Three days ago, our GE Cafe Series dishwasher nearly caused a fire. If I had not been home that day, it surely would have. I ran the dishwasher as usual and went about my day several hours later. I detected a strange acrid smell and with my five-year-old who was ill and at home that day, discovered the dishwasher door was burning hot to the touch. I needed a potholder to open the door. Once opened, there was a blast of heat and smoke. I needed to use oven mitts to protect my hands from the heat to pull the racks out and handle the dishes. The heating element did not deactivate at the end of the cycle.If I had not been at home, the house would have been destroyed as all the plastic items on the top rack in the dishwasher melted. In addition the plastic parts of the lower rack, the wheels and their clips; the silverware holder; covers; the clips that hold the pot tins in place were destroyed, to the point that the majority of our silverware was coated with plastic. The plastic on the lower water dispenser has been demolished; it completely melted more than 50% of the plastic covering on the arm and is charred and burned. We are so lucky to still have a home!The door must be kept open. When the door is closed, the element super heats and presents a major fire hazard. We have noticed that there is a recall for similar models with plastic tubs, but ours has a stainless tub. GE needs to broaden the recall to include all these models. This is a serious issue that needs to be addressed immediately. Our GE Cafe Series dishwasher model #CDW9380N20SS was installed on October 1, 2008. I would not be surprised to find that parts from the recall in April 2008 were also used in the Cafe Series. I have discovered in the few days since the DW units malfunction that there are over 1000 complaints listed with similar, even identical complaints, on multiple internet sites with the same problems.

GE is a proven brand and its quality for reliability. When I was shopping for one I went with a known brand. Planning to upgrade my kitchen and will be shopping for a countertop microwave. The over-the-range microwave has stood up 15 years of use. Happy with purchase and performance. Will purchase GE brands in the future.

I purchased a GE dishwasher model no. GLD6700N00CC, serial no. ** about 4 years ago. It just finished the wash, rinse and drying cycle when without warning, the front panel on the dishwasher started smoking and spewing fumes in my kitchen. The front door of the dishwasher and top of my counter were extremely hot. Luckily, I was home when it happened. Otherwise, I might have come home to a fire.

Our GE microwave, manufactured in 2012, has been running fine, but the door handle has cracked on the bottom. Imagine my shock when I found the cheapest price for a PLASTIC handle was well over $100. How can this be?

In late March, we placed a service call under GEs one year warranty. The outcome - a gasket repair. Within a week or two, the door began to drip from both the right/left bottom. With having three teens, I figured someone opened the door and released some water. Well, that just wasnt the cause. Shortly over the next few days, the leak was consistent and I placed a service call to GE on 4/19. The customer representative offered, instead of a service call, to order some panels that fit it the bottom of the dishwasher. I stated clearly that our one year warranty was up on 4/25 and if this does not work, would GE address the issue with a service call? Answer was yes. Within a few weeks, I began to worry when I did not receive the panels. A call to GE was made; however, no documentation was noted of the call made on 4/19. However, GE stated the information might be in parts department, but regardless now, that call was made after one year warranty, extended warranty would fix the issue. Long story short, the extended warranty states problem initiated under GE and GE states the extended warranty is responsible because the call was made outside the one year warranty. I expressed that GE never fulfilled responsibility as GE did not even notify us that panels were not available for our unit. In the meantime, I am the one out of a working dishwasher. Now I know $539 may not be a lot to invest, but we feel the loss. The frustration and lack of responsibility to correct the repair is just beyond me. GE is responsible. Oh and did I share that lack of communication with GE is horrible? A promised call within 12-24 hours just doesnt happen. Again, I know most would say its not worth the frustration, but it makes me sad that GE and Assurant Warranty company can get away with what I know is wrong. Weve learned from this ordeal. No more GE products in our household.

We purchased a GE Profile dishwasher, model PDW9880J00ss, in July 2005, along with GE range, refrigerator and microwave oven. We have had nothing but trouble with them. Most currently, the power board did not shut off at the end of the cycle, overheated and melted the harness also. We were alerted when the odor of burnt plastic filled our home. It was fortunate that we were home and in the next room, or our house could have burned down.The dishwasher cannot be repaired. I will contact GE to see what, if anything they will do to compensate me, but I am not optimistic. I will never buy GL products again. I thought by buying top of the line products from a well-known manufacturer, I would have a quality product. I was totally wrong. Sometimes, you dont get what you pay for.

I bought one of the microwave ovens with two metal shelves. I found that the shelf in the middle of the oven was in the way and I removed it years ago, but left the top shelf in the unit. The other day, while cooking in the microwave it started to spark at the point where the shelf sat on a small clip. The inside of the oven is ruined. Why would anyone put metal shelves inside a microwave? Im just lucky that I was nearby and able to stop the fire before it destroyed my kitchen.

I purchased a GE dishwasher model GSD2100v50BB on June 6, 2016. By March 9, 2017, a switch broke which caused the machine to be stuck in the wash cycle for over an hour before it was discovered. This caused soapy water to flow out of the machine all over the floor. It was fixed under warranty but by June 29, 2017 it broke again. It is no longer under warranty and it will cost $70 to 100 to fix it again. It was purchased at Home Depot and they state it is to be handled by GE. GE states that since a year has elapsed, they are not responsible for the repair.

I purchased 9k total for all GE appliances, their dishwashers are flat junk, the bright side is I made a friend with their repairman ha aha ah true story!!! Dont buy, lot of other better choices and lots more reliable. P.S. Customer support terrible.

I was advised to replace the timer #WD21X10059. I replaced the timer and it still doesnt fill water. I purchased this 2000 Hallmark Park model and the seller said the dishwasher has never worked. The model #GSS1800Z01 does not add water when turned on. The water line has been checked and is OK. Is there a service bulletin on this unit?

I have had my fridge since 1984. It runs great and I have not had any problems with it. The freezer is on top and it keeps the food well frozen. I think the key to keeping food properly chilled and frozen is setting the temperature controls properly.

Almost immediately after purchasing the GE microwave we started having problems with the circuit board. It is now totally on the blink after only 4 years. This was a high price appliance. Sometimes when setting the timer on 30 seconds, the microwave would still be running and after looking at the timer it would still have 4 or more minutes left to cook. This is a FIRE HAZARD! We have lost food from timer malfunctions. This is a product I would be afraid to purchase. I am wondering why cant there be recalls on these cheaply built defective microwaves since you read of the same malfunctions over and over. GOODBYE GE!

I work as a service tech for a major insurance company. I am a master tech, and master electrician. The company that I work for owns an apartment complex which is used to house company executives whose offices are located at other sites, but often come to the Chattanooga Site to work short term. I was called to repair an old dishwasher in one of the apartments. Upon looking at the existing dishwasher, I decided to replace with a new one. I received a new GE model GDF 510 PGD 1WW dishwasher on November 8, 2013. As usual I unpackaged the appliance and examined the exterior. Finding no visible damage, and with the help of a master plumber, I removed the old dishwasher, and installed the new one. After all the connections were made, I opened the door, removed all the packaging from the dishwasher, and found the upper spray arm lying in disarray in the bottom of the machine. Assuming that this was the way that the machine was packaged, I installed the spray arm, plugged the machine up and started the machine as the operations manual instructed. The machine would not work. The power lamp would burn solid for a few seconds and start flashing. I tried to start the machine a number of times while reading the instructions, and while my partner read the instructions aloud, but with no results. Finally, I used a screwdriver to hold the door switch closed, pressed the start button and the unit started. The catch mounted on the door would not make the door switch, mounted on the machine body. We tried to adjust the switch and the catch, but with no success.The dishwasher did not show any signs of exterior shipping damage, but for some reason the upper spray arm was off and lying in the bottom of the unit, I found a small piece of broken plastic and a screw in the bottom of the machine, and the door switch would not make. Outside that I have no complaints. I am not sure where this machine was assembled, but it certainly was not equal to the machine that we removed. Thanks GE for making my job harder. I will have to find another dishwasher Monday and replace the damaged one, and perhaps send this one back, but the replacement will certainly be another brand.

I purchase GE Profile appliances for my new home. I thought I had done my research but until I actually owned I found I feel differently. The microwave pad scratches very easy and after only a few months you can see which buttons I use the most. I’ve only used a microfibers cloth to clean and it scratched the surface. Appliance repairman said to use terry towel. Wish I’d known that. Secondly, after owning all Samsung appliances previously I now appreciate what I had. So many of the features of my past microwave are not on this GE. For example the vegetable good, built in sensory knew when vegetables were cooked. Also, soften butter and chocolate was another feature. Thaw meat knew when it was thawed. So my advise go for the Samsung microwave

Our GE microwave/convection oven model number JES1290SK01 is making grinding noises and has caught fire once on the side panel. We have owned this microwave for only 4 years. It was a terrible investment. No wonder Obummer had to bail them out. That is the quality the unions are currently producing. It’s sad really...

Had model JES1460DS3BB less than 2 years. I started to smell burning plastic when using it. Research tells me the wiring is burning up. Im sick and tired of GE appliances. Ever since my GE toaster caught on fire in 1969 Ive had bad luck with GE. I gave the company another chance when I bought this microwave. I will never buy another GE appliance - large or small.