I purchased a GE microwave from PC Richard and Son in 2011. The microwave is mounted above the oven. On March 13, 2013, the microwave (model JVM1750DP1WW) sparked a fire inside while my daughter cooked a waffle. After I contacted GE via email, the case manager (Misty) sent a technician to my home to inspect the microwave. This was free of charge. The technician claimed the microwave was able to be repaired and he needed to order touch up paint and a few parts. I was shocked that the tech claimed this was a simple repair and able to be fixed. I said, You need touch up paint? This is going to look horrible. How safe can this be after having a fire inside? He claimed it will look good and I would not notice the paint. I spent $411.00 on this microwave less than 2 years ago. I dont think I should have it fixed and touched up with paint to cover burn marks. The microwave went on fire. I dont want it fixed. Its not safe and should be scraped for safety regulations, not repaired and touched up inside with paint. The tech ordered a few parts and I immediately called the case manager Misty to stress to her my numerous concerns on the actions of the technician. I made clear that I was not satisfied with my microwave being fixed and painted when it went on fire, but would like a replacement. I told her I could understand fixing it if it was a broken part or electronic device, but not a fire. She agreed that she also would not like to have a fixed microwave in her home, but that GE can sell me one at a lower price of $150.00. Really, do they need the money that bad that they cant stand behind a dissatisfied consumer when their product went on fire? This could have been so much worse. Lucky my daughter was in the next room. She smelled, heard the fire and stopped the microwave. I paid the $150 just so I can have a working, new, safer microwave in my kitchen. But this is crazy and not good business ethic on GEs behalf. This should be set as a recall, not a repair. I contacted the service manager again stressing my complaint and feelings about paying this fee for a new microwave. She said again that if the technician says the microwave can be fixed, then theyll listen to the technician and fix the item. Well this seems a little one sided since the technician works for GE. No brainier. What do you think he is going to say?

So I was forewarned by my family of nightmare experiences they had with GE appliances over the course of the last 50 years of our family. I just bought a home with 2 GE dishwashers that are both under 5 years old, and both are malfunctioning terribly. The one has leaked from the bottom and created severe water damage, and the other will not drain. Just an affirmation of the bad experiences my family has had in the past. Cheaply made, and often the go to appliances installed in manufactured and new homes. Had a service technician come out after speaking with GE on the phone and they assured me it was cost free. After the technician came out and told me I was being billed $105 for the call, and it would cost an additional $255 to fix the washing machine. The tech was not very friendly or helpful, and his only concern was collecting the bill. Avoid these products!

GE dishwasher caught fire - not part of recall. I arrived home for lunch to find smoke alarm going off and kitchen hot and hazy. Determined it was dishwasher and opened to thick black smoke pouring out. Heat so extreme cups/dishes and racks and spinning thing on bottom had melted and adhered to elements, each other and bottom. Parts of the dishwasher itself are warped (steel!). Granite countertops too hot to touch and wood cabinetry surrounding it darkened. Dont know the extent of that damage yet. Thank GOD I came home for lunch- I normally do not. I truly believe our house would have been on fire.

We had a new GE Monogram dishwasher installed September 2014, a little over a year. We had a hose leak and it cost us $229.00. I do not recommend this product.

We have a 2017 GE profile built on microwave. The microwave started shooting fire inside the microwave a year ago. GE fixed it. Last week the microwave started shootings fire inside the microwave again. This time it was much worse. The GE technician told me it was not fixable. I called GE customer relations and was told too bad because it’s not under warranty anymore. They offered a minimal discount on a new similar model. The attitudes of the customer care representative and supervisor took me by surprise. They were curt and told me, Guess you should have gotten the extended warranty. When it comes time to replace my kitchen there will not be any GE products in it. GE does not stand behind their products. The tech told me there are issues with the profile microwave and he felt they would replace it. They did not replace it and were rude. I have been a loyal GE customer. Not anymore.

Dishwasher works fine; however, do not like the interior which is all plastic. It comes with several tray holders which I found awkward to use. I wish it took less time and water to get the dishes done.

This is the second time GE has replaced the unit. The paint is peeling. The microwave is all rusty. The same thing happened to the first one too. It looks disgusting.

Bought model DDT575SMFES less than a month ago (along with a new microwave, stove and fridge) from the Home Depot. When the appliances were delivered the stove had some flaws in it so it had to be replaced. The dishwasher is a whole other story. It worked fine for a week but now it takes forever to get it to turn on. We try and try but it just beeps and the light flashes. Once we do get it turned on to stops before completing the cycle. If it does run a full cycle the soap dispenser does not dispense the soap. I wish I would have looked at this site before purchasing these GE appliances. Total junk and will NEVER buy anything GE again if I can help it. No responses back from GE and from what I read dont expect much from them. Now we will not be able to match the Slate with another brand and are stuck here.

The GE dishwasher (model number GLD9312P02SS) I bought about 3 years ago is not cleaning properly because the screening that keeps the bits of food out is disintegrated, and apparently, the part to fix it would cost over $300.00. I will never buy another GE product again.

I moved into a house with the dishwasher already installed and it didnt work. We closed it so we didnt use electricity but it started and wouldnt stop. The power button is broken. It just sits there and the lights are always lit. I tried calling for help but the workers were very unhelpful. I called a different number and was waiting a whole five minutes and no one picked up!

I bought a microwave Model JVM316RF3SS on 6/12/16 from Best Buy. Here is the serial number GG242212A. This thing is tripping the circuit breaker, it is intermittent. I had been buying GE for the house because the stuff would last or they would stand behind their products. Looks like times have changed, I called yesterday to the customer service and the only thing I was offered was a song and dance. If you are to consider buying a GE product, think about it again. This microwave is only a year and a half, to have a tech service guy come out and look at it, it is was priced out at $97-108 for a visit and then parts and time will be added in additional to this visit price.They have priced this repair out to be cheaper to just replace it. My washer is making excessive pump motor bearing noise during the high spin cycle, this is two years old. Looks like GE is building crap. My background is a mechanical technician for over thirty years, building products that are to be used in the household should be built to last not become a disposable item like a cigarette lighter. Good job GE for joining the other substandard products being built. Must be outsourcing this to a foreign country like everything else. With the model and serial number GE you can call me if you have ANY questions.

I moved in to a newly-built home in Nov. 2010. Shortly after, my GE Profile microwave seemingly caught fire. We called for service and were offered a repair free of charge. We declined a repair and did receive a brand new appliance of the same model. Around June 2012, the exact same fire happened to the new one. I must admit that it took me about 9 months to report the problem because my family had been devastated with a lengthy illness and passing of my mother. While going through our trial, I shut down my mothers apartment and just started to use her countertop microwave. Realizing that I needed to address the problem with my microwave, I called and explained this to GE service. I guess that the representative was just doing her job and stated the year warranty spiel and had no concern of this being my second microwave within a two and a half year span and also the length of time that it had not been working. I was immediately given the cost for a serviceman to come out plus I was told that I would have to pay for any parts. When I went to Home Depot to price the microwave; the cost for my model was $278. I therefore decided. Why bother to have a defected model repaired? Who needs the aggravation? I will just eat my loss and buy another microwave. Be assured that it will not be a GE. I will never again buy a General Electric product.

This dryer replaced an eight year old Frigidaire Gallery Series. The new GE dryer is drying clothes much quicker. I have read some reviews complaining of the buzzer, but it is a nice feature to know when the cycle is about to complete. The nice thing about this dryer is that it has the right amount of dial drying features needed without a bunch of electronics that can typically cost a big service call if gone bad. Also the bottom rear of the dryer allowed enough room for the exhaust to go either left or right behind the dryer with it still sitting close to the back wall. I was lucky to find this as an open box item returned to the store because it was not a gas dryer for the first buyer. Photo shows exhaust located to outside wall.

I had nothing but problems since day 1. The dishwasher has never cleaned dishes properly. We have to pre-scrub. The soap dispenser does not operate properly. The keypad stopped working after only 2 years.

I purchase GE Profile appliances for my new home. I thought I had done my research but until I actually owned I found I feel differently. The microwave pad scratches very easy and after only a few months you can see which buttons I use the most. I’ve only used a microfibers cloth to clean and it scratched the surface. Appliance repairman said to use terry towel. Wish I’d known that. Secondly, after owning all Samsung appliances previously I now appreciate what I had. So many of the features of my past microwave are not on this GE. For example the vegetable good, built in sensory knew when vegetables were cooked. Also, soften butter and chocolate was another feature. Thaw meat knew when it was thawed. So my advise go for the Samsung microwave

Purchased a GE 650 dishwasher which we quickly discovered has terrible racking for North American dishware. Also the control panel is overly complicated yet limited to use (always flashes settings even when not in use). Once you figure out how to load dishes into the very tight/ narrow tines they fall over and chip/break. When investigating the dishwashers by GE made in China/Taiwan etc all have same issue. The ones made in USA by GE have wider and longer tines. We have had MANY dishwashers over the 40 years and NEVER had one as bad as this.When calling GE customer service the senior rep was not willing to offer any customer satisfaction as nothing technically was wrong. At one point she stated we had made the purchase so live with it even though it was the wrong choice. We offered to pay for any cost difference, etc. When questioned about GEs interest in customer satisfaction she stated that was not a warranty issue. She was not concerned about a satisfied customer. With that, we will not be purchasing another GE product or its affiliates. What a waste of money.

GE Profile Dishwasher Model GLD4400N10WW - This was the second GE dishwasher I have purchased and it will be the last. When guests come to my home, they ask whats wrong with my dishwasher when helping me in the kitchen. The racks are bubbled and there is a burn mark by the heating element from overheating. The dishes have always been too hot to unload afterwards that you have to leave the door open for ten minutes before touching them, or you will burn your hands. I purchased this dishwasher from Lowes on 2/23/2008 for $368.88. I see that there is a recall on the dishwasher now, and it is only worth a repair. Quite frankly, my dishwasher is all ruined inside and it needs more than just a new heating element. It isnt worth it to me. It is very noisy and sounds awful when I use it. I will not be putting any money into replacement parts at this point, and I am very disappointed with my purchase. A dishwasher should last more than 3.5 years. My dishwasher should be replaced for free, not just get a new element. My husband is a licensed builder and he will not be using GE either, after this experience. I am enclosing a photo of the burns.

Entire inside is plastic crap. Dishwasher is very loud and takes a long time. Racks are ok but cheap feeling. If I was choosing, I wouldnt buy it. This GE was in new house. Overall feel is very cheap. Too much plastic. Very low end builder model. Steel inside or heavy plastic will take more beatings.

This GE CVM2072SM1SS Microwave (over-range model) worked fine for five years. Then, we discovered the plastic film over the touchscreen starting to peel. After a bit of wrangling with Consumer Relations, they sent me a replacement touchscreen. The LCD didnt display properly, so they sent me another one. It worked for three months, then in the middle of programming to reheat some food, we got the following error message: Control Fault, Shorted touchscreen - F10. The control has detected a shorted touchscreen and has shut off the oven. It may still be possible to use the oven. However, if this message continues to appear, your oven will require service.The only way to clear the message was to unplug the unit. No amount of replugging in cleared the message. I called GE and they said they would replace the entire unit with a new model under some program they had. Sounded fine to me. I left the house. When I returned, I received a message that their representative called back to say they would not replace the unit, since the program had expired. Huh? I called again, and after a bunch more wrangling, they agreed to send a service tech out and replace whatever needed replacing or fixing at no charge. Of course, they never really made a notation of that, so when he got here, he had to get on the phone and sort it out. Finally, he replaced the touchscreen. Lets see how long it lasts this time.

Purchased all new GE appliances: oven, cooktop, refrigerator, dishwasher and microwave and can’t say enough goodness about all. I would recommend GE appliances to everyone. Prices were reasonable and delivery and hookup were done with ease and professionally.

I bough a GE microwave oven, model JVM1740SM1SS, less than 2 years ago. The keypad says that it is shorted out and needs service. It turns on randomly. I unplugged it and plugged it back in, and it will either say, service needed, keypad shorted out or press clock.GE has so many complaints about there microwaves, some that are very serious. They still claim that there are no problems with them. They have to know there are problems, but do not want to issue a recall and take a financial lose. Its only a matter of time, before something so serious happens that it will be a bigger financial lose than a recall.

I bought a Moffat washer and dryer, and the timer came out of place and burnt on the inside. The timer clips in and if push too hard it will fall out or break the clip. We have extended warranty on it and due the repairman came out twice. The warranty person said it cost more for the repairman than the dryer worth - theres no more warranty. I think the dryer should replace when the timer fell out of place. This dryer should be called back.

I purchased a dishwasher and it doesnt clean all the dishes. They sent out a repairman on 4 different occasions (one came out twice) and each one gave a different reason why they think it wasnt working right (what we are doing wrong). Each time, we followed their directions and the machine still doesnt clean. A decision was made that they will not replace the dishwasher, but would offer us an extended warranty. I explained that an extended warranty is useless to me if the machine isnt working correctly now.

Purchased a GE over-the-range microwave worth about $400. About 2/1/2 yrs in it stopped working. Had a GE repairman come out to fix it. They charge $95 just to come out. I complained so they gave me 50% off parts and labor after the initial investment. It took him about ten minutes to pull out the defective part, a $10 thermostat which he replaced. Total cost: $162. Ive had GE products for years but the new ones are much more cheaply made IMHO. Made in Malaysia. In addition, the handle is breaking off as are plastic parts coming of the top of it. I guess Ill consider getting extended warranties from now on because these products are cheap. If Id had it longer, Id have bought a new one instead of fixing it.

My GE model JEB1095BB04 microwave/convection oven is 6 years old and the magnatron has failed twice. The first time, GE said they would replace the part free of charge, but I had to pay for the service call, which I did and it cost me $212.00. Now, the part has failed again, the second time in 2 years, and GE basically said you lose. A rep from GE told me that they only guarantee their products for 1 year. There is no doubt in my mind that all GE products are garbage and I would strongly discourage anyone from buying them. I will gladly take my GE microwave, smash it into pieces and replace it with a KitchenAid appliance, which is backed by a reputable company.

Our builder installed our GE microwave Model: JVM7195SF1SS as part of our kitchen appliances. It worked fine for about 3 1/2 years. Then it stopped heating. It turns on and appears to work, but after inserting a cup of cold water and running it on high 10 minutes, we remove cold water. I looked into this and found that the magnetron (spelling?) tends to fail. Apparently, its a known issue, based on the reviews. GE wont allow consumers to replace this and doesnt provide replacement parts. Getting it professionally repaired will cost more than the microwave is worth. GE sent me a certificate for $150 to replace it, but it will cost at least twice that to purchase a new unit and get it installed. Plus, we have to buy another GE. I dont want to end up in the same situation. So we didnt use the certificate.

My GE Dishwasher is disintegrating. Its three years old and we didnt live here for a year of that time. The door where all the electronics just fell apart. I bought the most expensive GE Dishwasher I could find at that time because we wanted one that was quiet due to the way our house is laid out. We were able to put the door together again but the strip across the top never fit again so we taped it on. Model PDT750SSF1SS. The controls wont work.

According to the label in my GE Sensor microwave oven, it was manufactured in October 2010. I dont know how long after that time I purchased it. The paint on the ceiling is falling off and what hasnt fallen off is bubbling up over the entire surface, exposing bare metal. There is also missing paint on the floor of the oven. I called GE today and was told by a representative that it is a fire hazard and I should stop using it. She said I must have used a harsh chemical, but I have used nothing but dish detergent and water on paper towels. There should be a recall of these ovens, and GE needs to improve the quality of the paint. The microwave is not that old, and this should not have happened!

GE Profile Microwave JVM1850DMCC - For the third time in 5.5 years, Ive experienced a magnetron failure in a GE Profile Microwave. The first failure was fixed under warranty. The second was so bad, the microwave had to be replaced, but it was no longer under warranty. I should have heeded the warning and gone to another brand, but on 12/31/10, I paid over $500 to replace the microwave with a new GE Profile to match the existing appliances. Apparently this was a big mistake as the magnetron has failed yet again. The microwave is on its own separate 20A circuit, so that shouldnt be an issue. It would seem, however, based on the number of complaints I see on this site, there is something inherently wrong with the manufacture of these microwaves, or more specifically the magnetrons. Im extremely disgusted at this point.

I love my GE dishwasher with sanitizing. It works great at cleaning, drying and sanitizing my dishes and it’s really quiet. I love the stainless steel. I forget it’s on at times because it’s so quiet. Happy with it.

I love the GE. I bought a GE dual fuel range about 3 years ago when my 6 yr old Frigidaire stove caught fire. Always wanted to cook with gas but have electric oven and broiler. It's also easy to clean the cooktop unlike older gas stoves. Love the big fast boiler eye.

Microwave fan just stopped working. Dishwasher wont dry dishes. Also, cloudy water drooling down door when you open it. If you set it on heavy or normal, it runs forever. This is horrible for a year old product. They were acting up before then. Busy schedule kept us from reacting. Looks brand new, works like its 20 years old. Help.

Figure it out GE! The sixth motor and mode selector for our washer has been reluctantly ordered by a tech this morning. The second motor was installed months after buying the brand new machine. Now, only two months since the fifth motor and mode selector was installed (Dec 2, 2011), the wiring harness is burnt up. The tech recommends replacement of the washer by GE, but only gets push-back from GE. This newest incident included a horrific smell of smoke. I do not trust this machine. I have a wife and child to protect. Think about it - do the math - add your costs for repeated repairs. You do not get to be a company the size of GE by not understanding simple economics. Open your eyes and replace our washer.

No issues yet. But only had for 6 months so time will tell. Read a lot of negative reviews but none here. Bought in Nov ‘18 from Home Depot. Delivered and installed on time. Replaced 13 yr old GE appliances that were still working.

We purchased a manufactured home that had brand new, GE appliances in it. We have been in the home for almost two years, but the dishwasher has never worked well, at ALL, even when it was brand new. We called GE and they sent a local appliance repairman to our house. He said that there was nothing wrong with the dishwasher. They are just junk. Amen! I have tried running the water in the sink until it is hot before the dishwasher fills up, we have tried using a citrus additive that is supposed to help it clean better, we have tried several different kinds of soap, NOTHING works. It never gets the dishes clean, there is always residue and food left at the bottom of the dishwasher, and it runs for hours on end. I cant wait until I can get rid of this pile of junk and purchase a Whirlpool or anything else. I will never purchase GE appliances, EVER!!!!

Bought a new GE over the range microwave in April 2021 and it broke/stopped heating July. They replaced the magnetron in September and its broken again a month later. Same issue and parts are out 2-3 months.

We had to replace our dishwasher a few months ago and we got a GE Dishwasher and we could not be happier. This unit cleans so much better and seems to take a lot less time to do a full load. I would recommend GE to my family and friends.

I bought a GE stainless steel over the range microwave vented oven in may of 2012. At 24 months, it caught on fire while cooking a bag of popcorn. Fire shot out of the side of the microwave. I shut it off but it still shoots fire out if you try to use. The warranty on this unit is one year. It is unrepairable.

GE GDF520PGDWW 24 white, full console dishwasher - Energy Star. I have had this dishwasher model since December 2014 and it has not drained consistently since the beginning either during the wash cycle or rinse cycle. GE has sent three different repair companies to replace the pump, the control panel, and ultimately the entire dishwasher, yet even the new dishwasher still does not drain consistently. Sometimes it drains and sometimes it doesnt. The GE-certified repairman was again here this morning and is again ordering a new pump. Counting the original pump, the previously replaced pump and the pump in the new unit, this would be the fourth pump. I tried to suggest the problem may not be the pump, but the repairman could not think of another possible issue. I do not recommend purchasing this dishwasher.

Our microwave caught fire today and burned our kitchen, stove top, & attic. According to the Fire Captain, the cause of the fire was the GE microwave panel shorting out. Had my mom not been standing right there as it happened, our entire house would have surely been a loss.

I purchased a GE Microwave Oven model # JES1139WL03 in late May of 2010. In early July, the paint started coming off the inside of the door when I wiped it with a damp dishcloth. I called Lowes, where I had purchased it, but was told that their warranty was only 30 days. I called GEs Consumer Support line and was told that for $65, I could ship the microwave to a repair center who would determine whether the machine could be repainted or would need to be replaced. I was told that either would require me to pay for it, since the machine still worked and peeling paint was not considered to be a warranty item. I guess if it catches fire, then they might warranty it.

The dishwasher malfunctioned and flooded our home. The dishwasher continued to run even with the door open and the display showing “leak detected”. We had started it before we left the house and it had been running for about 20 minutes when we left. When we came home hours later, hot water was still being produced by the dishwasher and had flooded our kitchen and basement. We could not stop the dishwasher with buttons at that point and had turn off electrical and water supply to it. The absolute worst part is they will not replace or refund it even though it’s less than six months old. They are only offering to service it and expect me to continue using it.

Installed by builder of home. Mid level SS model, very quiet. Does not dry dishes completely. LED lights on control panel remain on indicating cycle even when finished.

Not very satisfied with the functionality. Turntable does not work or has ever worked. Time features and power adjustments are not very intuitive. I would not recommend this brand, I believe there are other brands out there are much better for the same price range.

Purchased my GE microwave roughly 2 years ago. Recently it started running with the door OPENED. I cannot get it to stop even when pressing the cancel button. This happened whether or not there was time remaining on the clock. I was very concerned about the microwave rays being harmful to my children. We unplugged it overnight, it worked for literally 2 minutes and then it would not even turn on. Model number HVM1540SN2SS. Pretty upset that I have to buy a new microwave already!! I was going to replace it with another GE microwave to match my other appliances, but after reading so many posts of other GE microwaves running with the door open I think I will slowly work GE appliances out of my kitchen.

The GE repairman just left. It wasnt the coil that was flaking, it was the eco dish washing detergent I was using. The detergent wasnt dissolving, it was clogging up the jets and burning on the coil. What I was seeing was black burned detergent flakes. The repairman gave me citric acid to use to clean out the clogs (for free). He also didnt charge me for the visit, even though it was my fault. He also told me to get the water in my sink really hot before I start the dishwasher. I am very impressed with his service!

After 6 month of leaking brand new dishwasher, 5 appointments of technicians that are lazy and lying on their reports, as well as have no clue what are they doing, with unreachable Case Manager and complete unprofessionalism. This is so far the worst experience in appliance purchase. DO NOT BUY GE APPLIANCES! DONT WASTE YOUR TIME & MONEY!

I owned this microwave for the last 5 years. Easy to installed, good appearance, stainless steel, easy to operate but fancy enough to prepare different meals to include the younger ones. Lighting very good and vent excellent.

Purchased new from Lowes. Dishwasher leaked starting less than a month after purchase. I have had it serviced 3 times since purchase and have another appointment scheduled. (It takes 2-4 weeks to get a tech out to your house). Currently they say he is going to come by on Tues and check to see which part to order next and then they will come back and work on the dishwasher when the part comes in. (Of course the dishwasher is leaking as I wait). They give a 8-5 service window so I will just have to sit here and wait on him to come by and decide what to order. This is pathetic. When you buy a new GE appliance you need to be aware that they literally do not have any program for replacing flawed appliances.

Since 2010, our 2006 GE 1.1 cu. ft. countertop microwave oven model # JES1136WL has had power failure problems. It began in our previous home and now in our next home. All of a sudden, Id check the panel and it would say PF, which means power failure. So, Id reset the clock and there it is, ready for the next usage. Over a year later, in our new home, as of yesterday, it will start and immediately cut off. Now, weve been using this microwave in the same plug since May and now its October. So, what happened? Today, Im looking for the users manual and have located it online. But it appears that the PDF GE has for it, the Adobe document, has a problem. So, Im going to check it on my laptop, as this is my PC. Thank God we only paid under $100 for it. On some of these consumer complaint stories, the person paid a great deal for theirs.

GE over the range microwave Model hvm1750DM1 WW - It’s just about 2 years old. It started making a grinding noise, then quit. No more GE for me.

In January 2013, my husband and I purchased new appliances from Home Depot, including the above referenced dishwasher. The first dishwasher was delivered broken. The display panel was detached from the body of the dishwasher. At that point, I was concerned about the quality of the product. From the way it was detached, it appeared to be very cheaply made. (It was also installed incorrectly, causing a leak under our sink and ruining the bottom of our cabinetry. We settled this with Home Depot, but I include this detail to help emphasize my frustration over this whole situation.)When I contacted Home Depot about the faulty product, they agreed to provide a replacement, so I decided to give it another try. I wish now that I had simply returned the product and purchased another brand. Upon receiving the new dishwasher, I noticed immediately that the edge of the inner rack was scratched so badly that the plastic coating was gone, and rust had already begun to appear. I had to call customer service and get replacement racks. (More on this to follow.) Allow me to detail our service call records:Call #1. Heat dry didnt work at all. The technician told me that I needed to run the water in the sink and make sure it was very hot before running the dishwasher, and he changed the settings. This created a slight improvement, but not much.Call #2. Soon after, detergent tabs started to get stuck in the dispenser cups. I was using the exact brand recommended in the manual. The technician told me that detergent tabs were just the worst, and that I should try gel detergent, even though this is contrary to what the manual states. The detergent ruined my silverware, and I have had to purchase a new set, which I now hand wash.Call #3. Using gel detergent did not work. Technician came back, and told me the wrong replacement racks were sent. That must be what was blocking the water from getting to the soap. He ordered another replacement rack. He brought a plastic door, watched the water, and told me the upper arm wasnt spinning fast enough. He made an adjustment and claimed to fix that.Call #4. Detergent still not emptying from the cup. A different technician came back and used the plastic door. He found a different problem, but did not have the parts to fix it, so, another service call had to be scheduled.Call #5. Technician comes back, and finally fixes the detergent cup problem. For now.Call #6. Heat dry now does not work at all. There is so much water on the dishes that I have to hand dry them, and afterward, I have to mop my floor. There is just a massive amount of water in the dishwasher. In addition, it will not start except on a one-hour delay. Pushing the delay button does nothing to change the settings, and does not allow me to scroll through like it should. This appointment is scheduled for today, but I am not hopeful that anything will change.At this point, I have no faith that this dishwasher will ever work. Customer service did extend my warranty for six months, but that is the only concession I have gotten from them. That extension will expire soon, and I fear that at that point I will simply have to spend another $600 on a new dishwasher and leave this one on the curb. Its unacceptable for any consumer to have to purchase a new dishwasher less than two years after purchasing from GE.

The wheels to roll tray in and out comes off sometimes, other than its fine, average wash cycle. Doesnt really clean heavy food off dishes so have clean first then put in dishwasher.

The dishwasher has had a long life and other than some of the inner pieces breaking, of which we have had to order parts and fix, It has been a good washer. The top rack has tons of room and it has the Stemware rack which is really nice. I wish it had a larger rack for silverware, which fills up fast. I like that can Open and add without having to reset. I LOVE the Simplicity of the Selections.

My GE microwave, has been running fine, but the door handle has cracked on the bottom. This is the second GE microwave that I have purchased in three years. They need to do a better job with the door handle. I will never buy another one.

Model GLD5660V00SS - seems to be an entry-level dishwasher compared to others I have used/had in the past. It is rather small inside - usually have to run it every day or every other day for just two of us. It is plastic inside and the wheels have already come off a couple of times even though Ive only been using it since July. Having said that, it does a decent job cleaning and is easy to load. The outside with the stainless panel is attractive and the controls are easy to use. It has a large, removable silverware bin that keeps silverware from nesting. However, the holes are not large enough for the knives to fit in properly. The tops are removable, so I can just put them in another section.

We installed a GE Spacemaker Microwave Oven /Range Hood in 2005. We used it mainly for the overhead light over the range, the timer, the vent fan, and only occasionally to microwave vegetables. On 8/5/2011, I put a dish of eggplant in a glass dish to heat up and the microwave shut down completely to the point that I had to check the circuit breaker to see if the switch was shut off. The microwave and everything associated with it is dead.

Last year in November while we were sitting in our living room and watching TV around 11:00 PM, we first smelled smoke and then noticed fire under the countertop above dishwasher. Luckily, we were awake to put fire out and disconnect dishwasher. This was all stainless steel, top of the line Profile dishwasher, part of our all Profile line. The next day I called GE customer service only to learn that dishwasher was recalled and that we were never informed about it. Very generously, they offered to replace our unit with equal top of the line PDT750SSF0SS. Instead of taking them to cleaners, as my lawyer suggested, I was stupid enough to accept this offer. A week later, dishwasher arrived but straight out of box, the door was damaged and it was full of water for some reason?! Another week passed by and finally this piece of junk was delivered. This December of 2014, just 3 weeks out of 1 year warranty, dishwasher stopped drying dishes. I called customer service and when they learned that I never purchased extended warranty, they told me to hitch hike. They offered me special customer service number which I called, they placed my name on the list, and never called back. This is the worst company I ever had to deal with, the worst products hands down and the most horrible customer service. If you dont take this post seriously and do not run away from GE, I guarantee you will be writing one of these posts, few days after warranty expires. I have reason to believe that these machines are somehow programmed through their computer to stop operating after warranty is out. Monday comes, I am calling DA office and filing claim against this predatory company. BUYERS BE AWARE!!!

Two years ago, after owning a GE JVM1490 microwave-convection oven (over the stove) for three years, the door handle broke.Let me clarify that I worked for GE first as an engineer, later as manager, for 20 years including 6 in Major Appliances. I am ashamed of what I am reading how GE is treating customers today.I am perfectly capable of replacing the handle myself if I am provided the complete and correct assembly drawings and/or instructions. GE refused to provide me anything when I requested them. The scant drawings and instructions I found online are insufficient. As a matter of fact, the design is so poor that removing the internal bezel, which you must do to reach the handle fasteners, forces you to break the mounting tabs, requiring replacement of this part plus the handle. This was confirmed by the parts store I visited.However, even after removing the bezel, neither I nor another ex-GE appliance engineer could figure out the access to the fasteners. I have glued the handle three times using epoxy and Cyanoacrylate (super glue), but it has broken off a fourth time. I will figure out a way of fixing it before I pay GE close to $100 for both the handle and bezel. And if I replace the appliance, you can be sure it will not be GE.GE should be ashamed of the poor design and deplorable customer service they are giving now. How things have changed!My suggestion is that all with this problem post name and phone number of GE customer service personnel they spoke with.

I called and emailed GE about a microwave that is in my summer home. Its probably been used a total of 15 hours. They suggested a tech. I asked how much and they told me about $95. I said it died, why not replace? They told me they will give a good discount, yada, yada. As I point out, now I have to install it again so whos going to pay for that? They keep stalling and Im still waiting. I also have over $8,000 in GE appliances. I guess I will not buy another. They do not stand behind their products.

Almost 2 years ago and right from the start this dishwasher did not clean. Numerous times they had people come out and supposedly fixed it. Ive had different suggestions as to what to do. 1. Turn on the hot water tap and make sure its hot. 2. Use various different cleaning solutions on top of the dishwasher soap. 3. Use loose detergent.4. Throw at the bottom of the washer.One of the arms keeps falling down. And the last time I was told I could return it and get a deal on a better machine. I am now left with hand washing every item that goes into it unless I want gritty glasses, dishes and silverware. I bought this at Home Depot. I will never buy any products such as this from them nor will I ever buy another GE product.

PVM1870SMC ($580 plus tax/Cost CDN). I bought all new GE Profile units in mid 2010 for my new house. I spent $7000, plus tax, for 4 items from a reputable company in Hannon Ontario. I bought a Fridge, Dual fuel range, Dishwasher and last the Microwave, model stated above.About 6 months back it started acting funny, but thought not too much of it as it was very intermittent. Today the Microwave will NOT seem to shut off after it beeps from cooking/warming up food and the door is open then closed. I close the door and it starts to hums. If food is in it, you can see it is still cooking. I open the door, and then close it again and it starts to Humming as soon as the door closes.The glass tray does not turn, nor does the light go on (when humming) as it does when you actually push the start button. If you do start it, everything works, that is the table turns, light goes on and it cooks/warms food etc. Then it beeps when done, you open the door to remove items, close the door, and again just starts humming.I unplug it for an hour, but as soon as you plug back in, again.. Hums until you open the door. I put a cup of water in it, and just closed the door, did not push the start button. After about 40 seconds, the water started to boil.

After heating some water in the microwave, I opened the door and removed the water. A few minutes later, I heard a noise and noticed the microwave was running and the control panel indicated it was off. I opened the door it turned off. Closed it and it was on. Smelled something burning electrical in nature. I had to kill the circuit breaker to turn it off. I opened the door and felt the inside of the microwave and it was extremely hot. I was concerned that it could result in a potential fire, I continually checked it until I felt it was cool.

We selected this microwave because it has a toaster and baking feature as our small kitchen would be better without a toaster oven taking up space. Turns out user must change accessories from glass to metal when using the toaster and baking feature. The space needed to store accessories rendered the space saving concept as useless. Also, the toasting is slow and does not quite equal what a toaster oven accomplishes. Also the baking/convection mode is so noisy, one cannot hear radio/tv. 30 minutes for a baked potato is a long time for excessive noise. We bought from Kitchen Solutions in the Bronx about May 2014.

Our GE microwave/convection oven model number JES1290SK01 is making grinding noises and has caught fire once on the side panel. We have owned this microwave for only 4 years. It was a terrible investment. No wonder Obummer had to bail them out. That is the quality the unions are currently producing. It’s sad really...

Purchased a new stainless steel 1200 watt General Electric Microwave in 2012. By 2013, the opening latch broke. They were willing to send the part as long as (I did the labor). I did the repair and put the machine back in service. At the end of 2014, an electrical storm occurred inside the unit with smoke and flames beginning within the control side of the unit. I unplugged it, let it cool, then later confirmed it was ruined. I tried consumer service again. They sent a repairman out to confirm the unit was not repairable. This time they called 2 days later and offered me a $20 coupon toward a new, retail GE microwave.Basically, they wasted my time. They should have just told me I was screwed and their units now only last 2 to 3 years, even if you buy a top end counter model. I waited at home 2 hours for this repairman to come by and several phone calls and would have more appreciated a quick answer, gotcha sucker! You bought a piece of crap GE product and youre screwed!

Have used GE dishwashers before - were good. However GE no longer makes them, its just a name - now made by MABE (part of HAIER), Mexican with Chinese ownership, and this new one arrived with a factory fault - cracked tub which leaked immediately. Cracked tub seam and leak found immediately by service tech GEs site referred. Good news is the leak detector worked! Bad news - is we didnt install it right away (old one still worked and pandemic...) so it was a year before we got to it (was partly a gift). So - now MFR Mabe is giving us the run around and so far not doing anything about the faulty dishwasher they mfd and shipped through Home Depot. Dont be fooled as we were - GE is not actually GE anymore and the mfr HAIER/MABE are doing nothing to correct a factory mfg fault.

I purchased a GE Cafe Over-the-Range Microwave along with a GE Range. It was delivered on Nov 2009. The control panel started acting up and quit working altogether in May 2011. I called GE and found that the replacement part and repair was almost as much as I paid for the microwave. After talking to several people and making my case, I was told they would give me a discount on replacing my unit. I was to look at microwaves and let them know which one I wanted. I have left several messages and no one at GE will return a call.

The brand performs wonderful. We enjoying. Also, has great features for cost. We have done several items in it and all come out great. Have not had any issues at all. I would recommend this brand and model. I would purchase similar item again.

Ive had my microwave for 12 years. Ive never had any problems with the microwave since its purchase and very pleased. I dont plan on replacing until the microwave would stop operating or not pleasing in the kitchen.

We bought a GE dishwasher and a GE oven/micro combo. We were told that we would have them in a week but it took three and a half weeks to get them. The dishwasher was damaged/defective and did not work; water leaked all over the floor several times and dishes wouldnt wash. They would not replace the unit but insisted that they had to service it. A couple more weeks passed and the repairman had to return thrice to finally get it to work. The microwave had a bent door that did not lineup properly when closed. Again, another repair was scheduled and we had to experience another service call. I have never had a worse experience buying appliances than I had at Pacific Sales. Kwam, the manager does not return phone calls. He made promises of helping us with a discount because of our troubles but has not kept those promises. Their contract installers are inept and unkempt. My appliances do not seem new since they were repaired and the door on the microwave is still not lined up as a new unit should be.This experience was an unmitigated disaster that should not happen to any consumer. Never will I buy anything from Pacific Sales or their parent Best Buy again. These problems are created by their management and their management does not care.

GE is a very reliable name brand with history to back it up. I’ve used their washing machines for years and only changed out once due to newer features. I had Thebes first washer for at least 10 years, maybe a little more. It only needed one part replaced, that was the capacitor, otherwise it was still usable. I am not an in depth handy person but I will read and do my research and found directions doable. Additionally, I found the service help desk very informative and that’s how I discovered it was the capacitor that had gone bad after washing clothes for so many years, and believe me, I did a lot of cycles with my kids and family. I feel I got more than my money's worth. Lastly, I’m still using their products to this day. I may not have the frequency because we are empty nesters but I still believe in their products,

GE is the only manufacturer who still makes an under cabinet size microwave and therefore I use this product. I renovated my kitchen 14 years ago and on my second microwave. It is small, but does do its job, but when I work with a larger microwave I realize how different it is due to its size and less powerful.

I have a 2011 GE Model # JES1456BJ05 microwave and it has been gently used and kept clean. Upon cleaning today I noticed that the top of the inside is blistering and peeling off. Surely this is not safe as it could fall into food, plus they should make them to stand heat, after all this is why they are made for heating things. I called GE who informed me that there is no recall on them so I am pretty much stuck to go out to buy a new one with no help from them. I now read that this has happened to people before. Lesson learned never purchase a GE microwave as they do not stand behind their products when a manufacturing problem develops if you are the first one to call, and beware and ready to buy a new one every 2-3 years. This is all they are made to last!!!!!

Wow, Donna from NJ, I could have written your dishwasher report! But since I didnt, I have never been so disappointed in an appliance purchase as my new GE dishwasher! Not only are some of the dishes & silverware coming out more dirty than they went in, it takes a ridiculously long time for a cycle. And if there are more than a couple of tablespoons of water on the door, it will pee out onto the floor when the door is closed! Not to mention that there is junk stuck to the floor just inside dishwasher, under the door, after the cycle has run! Yet the worst part is how dirty dishes are after even a Sani Wash cycle! Sometimes, the detergent lid is still closed. Sometimes its open, but the detergent is still there. Even then, dishes may be cleaner in appearance that time, than when the detergent is gone. A water glass, may have gritty stuff - not just detergent stuck and hiding down inside, or more obvious all over inside the glass. I have spent the past year experimenting with various things: detergents, amounts of detergents, arrangements of dishes, heat of water, pressure of water, rinsing dishes before cycle, etc. Glass and pottery normally fare better than plastics, but again the plastic may have started cleaner than they come out! The dealer has been out three times, finding nothing obvious the DW itself, nor anything I have done wrong. He has been told there is a kit that would fix the performance problem, but he cant purchase it, nor can his distributor. I have been told the length of cycle is because our government regulates the amount of water used. So my question is, then its okay to use more electricity?! Its totally embarrassing to serve someone a drink in a glass that is found not clean near the end of the drink! And I, too, have an old 12-years-dishwasher that still works! It was even a cheaper brand. I never had to think where pieces were arranged in that dishwasher. I just thought, in my newly built house, I should have new appliances!

When the handle on my expensive replacement (GE Profile for GE Profile) microwave/convection oven peeled, we called our retailer (PC Richards is really good about service). A new door showed up and it, too, has a plastic handle. The difference is, this time its solid grey plastic as opposed to white plastic with silver paint. Seems to me that an expensive SS appliance should have an SS handle. Too heavy? Just use a tube of SS - not solid. Too hot if above burners? Didnt my last GE Profile micro/convection have a SS handle? I spoke with customer relations. The person was well trained not to say anything that might suggest she agreed with me. Since the issue is cosmetic and not functional, I have to consider the issue dealt with now that the door has been replaced. I told them I will do my best to publicize this issue and that I will never again purchase a GE appliance. I also called CEO Jeff Immelts office in Connecticut. I made it clear that my dissatisfaction has cost them a long time, loyal customer and that I would spread the word. I would appreciate if anyone agrees with GE that a SS handle would be too hot over stove burners.

I like many other people have had issues with the keypad malfunctioning. The first one shattered the first time I used the microwave, I then replaced it 2 years later and now another 3 years the second one stopped working. GE was rude when I talked to them, said they had no record of my replacement keypads even though I contacted them directly and were offering another for $514. That is no deal, I could get one in the store for that price. Also, the icemaker and water dispenser in my GE Cafe french door refrigerator are constantly malfunctioning, my range keypad does not always work, and the seal around my dishwasher keeps coming off! GE these are not quality products and you do not stand behind them.

Were using a white GE Digital Microwave Oven at home Model No. JEI2870SPSS. We got it from Ansons a few months ago when our previous Kyowa was broken beyond repair. The price is reasonable, the usable space inside is adequate and the exterior design goes well with our kitchen. It has touchpad controls which are very easy to use especially with the pre-programmed settings like steam cook and snacks. So far it has worked very well. Its quite excellent at defrosting meat and evenly heats our food. We have no problem cleaning it and its pretty silent when in use. I hope this one lasts us longer since its pricier than the Kyowa and because use of the microwave less these days because they say the radio waves emitted by these machines cause cancer.

It works really well and this price point is good. It’s lasted me a few years and it is still in new condition. It has a nice modern look also. Good microwave for a great value.

My GE dishwasher model #GDF570ddF855 is the worst dishwasher Ive ever owned. I have had 4. Ive had this model for 6 months. This model is hard to turn or to figure out if it is turned on. Right now its locked up and Im following the direction to unlock but it wont unlock. So theres no real on/off button! There needs to be a control on the inside of door where you can turn the lock button. Im writing this so others wont buy this model as they will be thoroughly dissatisfied. Maybe all GE dishwashers are like this? This one sucks...

We purchased a GE dishwasher model GDF 510 in December 2012. We have had three service calls with a fourth one recommended. The first complaint was that dishes were not dry at the end of the cycle. After service calls to replace a faulty heater and install two computer upgrades, the silverware still is not dry. Finally after about 45 minutes into the cycle, it leaks onto the floor. GEs answer is to send another service technician. No thank you! They can have their dishwasher back.

We bought a brand new GE dishwasher from our local hardware store on Black Friday. It was $600 dishwasher on sale. It was installed on December 5th, it broke on December 6th, and we had a repair man come out to take a look at it. To be fair, the local hardware store did ask if we wanted to replace (2 week wait time) or repair (2 day wait time) it. Since it was a bolt that was severed (by opening the door to the machine, mind you), we figured it would be an easy fix. The first technician who visited said, Yeah, its broken. I have to order a new bolt and then come back out in a week to fix it. And oh, by the way, Ill have to drill a new hole for it too. Thats when I called GE customer service to request a new product. But since my 48 hour window had passed, and we opted to have it fixed, it was keep it or ask our local hardware store to replace it at their expense. I bit the bullet and just had it repaired. Now, less than 2 months later, the technician has been at our house three times. He’s soon to have a fourth visit because we need a new dispense modulator. After speaking with customer service several more times, and with a not very nice lady in the Chairmans office, I still have a defective product. Oh, did I mention that Im paid hourly and have now taken off 13 hours? So what’s the use of that $600 dishwasher that we bought? Its been out of commission for more than 2 weeks, in less than 2 months, and has now cost us $900. Thanks, GE! We’re so glad to see you stand behind your product.

Super sad about the performance of this dishwasher. This is the second leak in a year. The first time my husband fixed with new GE pump because we wanted the dishwasher up and running and the scheduled repair time was out more than a week. We were also told there would be no reimbursement to the damage to the brand new floor that was damaged. This time I REFUSE to have him fix the dishwasher even though once again the repair time is out more than a week. The cost of this dishwasher should warrant a functioning product.

Just purchased a home with GE Appliances. Dishwasher suddenly wont start and showing 1H code. Nothing in the user manual that explains what this means. Called customer support. After they requested unnecessary personal information (like email address, physical address, etc.), I was finally able to ask what this code meant. She went straight to, We are unable to provide that information over the phone. We have to send one of our service technicians out to your home. She refused to tell me what the code meant, and instantly wanted to charge me for tech visit. I hung up. Then I googled it, and found out right away that it meant the start was paused/delayed for 1 hour. I had hit the delay button by mistake. This was not specified in the manual under Delay Start, nor was customer support trained or willing to provide the answer to such a simple question. GE Support is just a Scam.

Purchased new GE dishwasher after previous model lasted over 11 years. Family eats most meals and home and typically runs washer at least 4 times per week. New model was upgrade with stainless steel interior and all the efficiency upgrades from technology advances. Ran great for first 18 months then suddenly we opened one morning and notices water standing in bottom of machine. Emptied dishes, re-ran with same result. Technician called and spent an hour diagnosing to determine water pump, control board and wash motor would all need to be replaced at a cost of nearly $600 or 75% of what we paid for the unit new less than 2 years ago. Simply unacceptable that GE would produce such an unreliable product. We will be replacing with a different brand and would tell anyone to avoid GE dishwashers.

I contacted by phone GEs customer service department (800-386-1215) on 2 separate occasions. The most recent was on 2/18/13. About 4 1/2 years ago, when we purchased our new house, we bought all new GE appliances for our kitchen and laundry room. My biggest complaint is with our dishwasher. The top and bottom racks are rusting and most of the prongs have broken off as a result. This should not happen for an appliance that is only about 4 1/2 years old. Their response was that I could purchase both the top and bottom rack. Why would I purchase the same racks only to have it happen again? Clearly this is happening because they used a poor quality steel.There was a recall not too long ago on our dishwasher and the service tech who came out to fix the recall couldnt believe how badly the racks have rusted. I understand there is no warranty; however, you would think or hope that the racks would last a lot longer than 4 1/2 years. I am very disappointed in the quality and the lack of help regarding this matter.

A recall on a dishwasher: The heating element was replaced due to the fact they said it could catch fire. The bottom of the dishwasher is plastic. They replaced the heating element with the same kind of element that was there. How could that be any safer if the bottom is still plastic? I have children in the house; I feel this is a dangerous situation. I am dissatisfied with GE. This is the third dishwasher with the same problem in a matter of 5 years.

I have had this microwave WES1130 for several years now and the paint began peeling before year two. Nearly all of the paint is now gone (fallen into my food). Also, I bought this microwave to replace a larger GE microwave that had failed after only 3 years. The 8-year-old GE fridge is humming loudly and leaks onto my floor, which has ruined the wooden floor and warped it. I will never again buy a GE product, and neither should you. They do not care at all about quality.

If I could give it less than a star, I would. We bought the GE model JEB18600M2WW as a wall insert microwave earlier to replace a 1999 GE of similar version that went out earlier this year. We use it 2-3 times daily, 30 seconds here, 2 minutes there. Today, I went to warm up the babys bottle, and it made a weird sound and went dead. Im sure its the same thing everyone else is complaining about. I wont be buying another GE microwave again.

Not even a year after purchase of new cafe series dishwasher, stainless lining rusting. Service called, GE tech agrees rusting of lining, GE warranty says not under warranty. Ive replaced screws that show signs of rust with aftermarket stainless screws. Cafe oven has had three front knobs just fall off - two were repaired under warranty and had to purchase extended warranty on third because it was more cost effective. Cafe Refrigerator had drain plate in back of unit completely rust away, tech knew what problem was before he stepped foot in my kitchen, he told us this was common. He caulked some sensor inside fridge box during service, I asked why, his response was its a design flaw and unit will operate better with this modification. Oh and redesign the ice dispenser, its tilted towards the back of the freezer and the ice is dispensed out the front.

We had a GE microwave that my parents got when I was in elementary school that lasted us through graduation (when I got it), and it then lasted me another 6 or 7 years after that. It was a great microwave, so we went with GE for our next one. What a mistake that was. The new one died completely less than a year after we got it (less than a year after its manufacture date at that!). The one after, one of the same make and model, lasted 3 years to the month after its manufacture date. Sorry GE, but I just do not have any interest in spending so much for so short a lifespan on your products, and its a damn shame that your quality has suffered so badly that you have lost a once-loyal customer of your brand.

We just had a Fire in our GE Microwave, Model # JVM1750SP1SS. Manufactured in August 2010. Purchased at Home Depot in December 2010 and installed January 2011. The right rear shelf hook caught fire while the microwave was in use. Luckily, we saw it in time... We are not sure who to complain to or tell about this. We went on GE.com to inform them of this issue and am waiting for a response. I see here that I am not alone. There is other info being shared on YouTube about this issue as well. GE better make good on this for me. Now I have to find my paperwork... Figure out who will remove this under cabinet installed oven and replace it. I am probably on my own here as it is 3 years old!!

My GE dishwasher came with my new Miller & Smith house. Its 2 years old. The bottom tray is rusting in several spots and you cant open the door while in operation to add an extra dish. When you open the door the dishwasher should pause while you add the dish, but this one continues working as if the door was closed and water sprays everywhere. I understand the one year warranty (they must know their products do not last long). Their support line tells me my options are to get it repaired ($99.95 for a tech to come and diagnose, then additional charges for parts and labor to install the parts on the next visit). The bottom tray is ~$125. I found their customer service rude, unsympathetic, and bothered by my questions. I was also told to go their website and review the rebate offers on a new dishwasher. I wanted to understand that program better, but the customer service agent did seemed uninterested to help me.I was quite surprised in getting this poor quality product and poor service from GE. Im not going to bother with repairs, because the cost at least $300, so I will opt to put that money in a different brand. I was considering giving GE another chance and taking them up on their rebate offer, but after reading all these other reviews, I certainly will not. The time I spent writing this will very likely have no impact on making GE change, but maybe put a tiny dent in their reputation and they will get one less sale from me.

I recently purchased a GE Profile 1.9 microwave oven from Home Depot less than a year ago. Last week I went to remove something that I had cooked and went to close the door and it would not stay shut. I ended up getting some masking tape to try and tape it shut in order to keep the light from staying on and burning out until morning when I could get a better look at it, thinking that it had to be something small that could be taken care of without any problem. Hinge adjustment, something getting in the way that I couldnt see, etc, etc. Wrong! I have been over this door with a fine tooth comb and there is nothing that I can see that is preventing it from staying closed, not only that but according to everything that I have read, I am very lucky that I didnt get fried while trying to figure out if the latching mechanism was functioning correctly. I am not even going to go through the long drawn out process of dealing with GE over this due to the simple fact that I have been there done that with my dishwasher that showed up with the front panel dented a few years back from the factory and I ended up blaming the place that I had purchased it through instead of GE and have since found out by reading other complaints that this seems to be something that is not unusual when it comes to GE appliances. I spent over 1100.00 dollars on the dishwasher and they only replaced the panel instead of giving me a new one, and I have never been satisfied with the way that it operates, and it was a very long and drawn out process and I am just not willing to spend the time again on another one of their products. It is unfortunate that we have entered a time where customer satisfaction means nothing, and the days of caring about having repeat business from a satisfied customer are over. The prices continue to rise on the things that we have become to depend on and cant seem to live without, but the quality and workmanship have not only diminished but also present safety threats. I will never purchase another GE anything and I am looking forward to the day when we all have finally had enough of this and do something that makes these companies stand behind the products that they sell and quits ripping the consumer off. Its rampant across the board no matter what you buy, and there should be laws in place in order to keep it from happening. We have laws for everything else, why not have a couple that protect the consumer and their pocket books.

I purchased a slate dishwasher in Oct, 2014. After the third cycle the soap would not dispense (door would not open) or the soap dribbled out and remained running down the door. I had to run the cycle twice to get the dishes clean and for the soap to dissolve. I called the store at which it was purchased. A tech came out and replaced a part. Did not work. After the second time, when the tech said nothing was wrong, even though he saw the soap running down the front door, I called GE. They sent a tech from a different store. After the eighth repair I told them I wanted it replaced. They had already replaced the soap dispenser twice, the control board and even told me to move the baskets (ridiculous). They also suggested I run hot water before the cycle! They said if it was repairable they could not replace it.We went back and forth with this and they finally agreed to replace it. Got the new slate dishwasher in July, 2015. After two cycles I started having the exact same issues! I will not deal with GE or ever buy another of their appliances. I will tell everyone I know not to deal with this company. Quality is terrible and service was extremely frustrating, having to take off work numerous times and wait hours for the service person. In the end, it never worked!

I got a GE cafe two years ago, all the matching appliances. A few weeks ago, we heard beeping in the middle of the night. ow every night at two am we get a message on the panel with annoying beeping. This weekend, we went out of town and when we returned the microwave was and had been on for a very long time. It doesnt take a genius to figure out that our house could burnt to the ground while we were gone! Thank God it didnt! Not to mention. my dishwasher does not clean! It takes 3 runs to wash.

Touch pad on GE CAFE over the range microwave started failing within first 2-3 years. Now, 6 years later, it has completed failed. Repair part alone (not including service call) is almost $550.00. Pure junk...made in MALAYSIA!

I had a new house build and it came with all GE appliances. The dishwasher Model GDT530PSD255 was not drying the dishes and the run time could be as much as 3 hours. The service man was there with in week. He said the dishwasher was working properly. After running through the cycles he said its working just fine. I open the door and it was all wet and the silverware tray and the silverware was wet and some soap was still on the door. He said everybody complains about the same thing. High efficiency Dishwasher have long run cycles and most dont dry to well. The silverware trays hold water because the tray sides are flat (horizontal) and that holds about a half of cup of water. All they have to do is put them on a 45 degree angle and the water will run off. Apparently it worked well on paper and no one actually ran it through its cycle. Needless to say I hate this dishwasher and its almost at the point to do them by hand. A lot of time is spent drying off dishes and silverware.

While the microwave works fine, as far as microwaves go; it does heat unevenly but eventually gets the job done, the interior is cracked and shows signs of rust and deterioration. I dont remember ever seeing this on in previously owned microwaves. I would only use it for basic heating and reheating.

I have had the GE Unitized washer dryer for 4 months with no problems. It has the cycle choices I need for washer and dryer. It's easy to load and remove clothes, even if the washer tub is a little deep. It washes bulky comforters, coats, heavy denim, bathroom rugs just fine. The dryer is big and quiet. It works like a HE but uses all types of detergent. Great buy! Gave 4 stars for function only because all models do not have a "rinse only" choice.