GE dishwasher model # GDF610PGJ5BB was fine the first year and a half. It began making noise with electronic control panel beeping for no reason. The wash cycles were incredibly long. Finally after reaching the 26 month mark, the electronic panel gave out. Having no warranty, I called the repair division of the appliance store we had purchased it from. They were to charge me $90 just to come out and look at it. With the purchase price just under $500, I wasnt willing to take the chance of repair costing a third or half of the purchase price. Regretfully, we decided to give up on repair of this dishwasher. We decided to purchase a new dishwasher, but certainly not a GE.

We have an overhead microwave that fits nicely into the spot. The power level seems to have dropped off, but this is after more than 8 years with lots of daily usage.

For the amt. of money I paid for this microwave, you would think it would outlast the house. I bought it 3 yrs ago. The touchpad covering started to get warped right off the bat, and the handle was always steaming hot when you used the stove top (also GE). The other day, while using the stove top, I happened to look at the microwave, and it had no power. I checked the breaker, it was fine. I happened to notice a crack on the touch pad. After further investigation, I noticed the entire touchpad is shattered. It was clearly from the heat given off from the stove top. And I wasnt even using the microwave at the time. I sent GE an email, didnt even get an auto response. I am going to call them, but we all know what they are going to say, and I am not paying $482 for the part. Was hoping there was a recall, since so many people on the net complain about the touchpad.

I purchased a GE over-the-range microwave in 2008. After 3 years, the magnetron went out and the microwave stopped heating. I called GE repair, and they told me it would cost over $300 to fix - close to the cost of a new microwave. Stupidly, I bought another GE microwave in August 2011, model JVM1750DP1BB. In the one year Ive had it, it has broken 4 times. One time, it was the magnetron (seems like a common problem). Another time it was the motherboard. Another time, it was a bad wiring problem. Each time, I called the GE repair service, and it takes 1-2 weeks to get an appointment. Twice, they cancelled my appointment on the day because they overbooked. Given that I had to take time off work for the appointments, this is a huge inconvenience. I have been waiting over this last time for an appointment, after they again cancelled my scheduled appointment. GE makes a terrible product, and their repair service is a joke. I bought GE because I wanted to Buy American, but they have completely turned me off. Think twice about buying GE! You will waste lots of time and money.

I purchased a GE microwave from PC Richard and Son in 2011. The microwave is mounted above the oven. On March 13, 2013, the microwave (model JVM1750DP1WW) sparked a fire inside while my daughter cooked a waffle. After I contacted GE via email, the case manager (Misty) sent a technician to my home to inspect the microwave. This was free of charge. The technician claimed the microwave was able to be repaired and he needed to order touch up paint and a few parts. I was shocked that the tech claimed this was a simple repair and able to be fixed. I said, You need touch up paint? This is going to look horrible. How safe can this be after having a fire inside? He claimed it will look good and I would not notice the paint. I spent $411.00 on this microwave less than 2 years ago. I dont think I should have it fixed and touched up with paint to cover burn marks. The microwave went on fire. I dont want it fixed. Its not safe and should be scraped for safety regulations, not repaired and touched up inside with paint. The tech ordered a few parts and I immediately called the case manager Misty to stress to her my numerous concerns on the actions of the technician. I made clear that I was not satisfied with my microwave being fixed and painted when it went on fire, but would like a replacement. I told her I could understand fixing it if it was a broken part or electronic device, but not a fire. She agreed that she also would not like to have a fixed microwave in her home, but that GE can sell me one at a lower price of $150.00. Really, do they need the money that bad that they cant stand behind a dissatisfied consumer when their product went on fire? This could have been so much worse. Lucky my daughter was in the next room. She smelled, heard the fire and stopped the microwave. I paid the $150 just so I can have a working, new, safer microwave in my kitchen. But this is crazy and not good business ethic on GEs behalf. This should be set as a recall, not a repair. I contacted the service manager again stressing my complaint and feelings about paying this fee for a new microwave. She said again that if the technician says the microwave can be fixed, then theyll listen to the technician and fix the item. Well this seems a little one sided since the technician works for GE. No brainier. What do you think he is going to say?

Bought the unit about 2 years ago. The interior paint started coming off after about 1 year and several months. At 2 years, the unit stopped working and is reporting a shorted keyboard. I have had other over-the-counter microwaves that lasted over 12 years and were replaced just due to old age and style. I have read about others with the exact same issues. Ill stay away from GE products big time after this display of poor reliability.

I bought GE dishwasher model #GDF570SGJOCC from a local appliance dealer in April, 2017. The machine cost about $600, and $150 to install. Today I learned the circuit board is caput and it will cost $600 to replace it. I will never again buy a GE product-- 2 years of service and it needs to be replaced.

RCA RMW953-White 0.9 cu. feet Microwave, 900-watts, 10-power levels, end cooking signal, glass turntable, 6-one-touch cooking menus, speed and weight defrost, cook by weight. Bubbles obscure text. I wanted a white microwave with a door handle, .9 and fairly powerful. I was glad to have found this microwave. But I dont know if the hole was there before, or my teenagers or I inadvertently put a small hole in the plastic covering over the control panel outside the microwave (NOT meant to be removed, I asked support) but now its become a larger hole as air got underneath. I cannot read the button text. I tried to cover it with scotch tape and thats not working.I searched and found out this is a common problem with GE microwaves. The buttons are very close to the bottom and therefore, countertop, so if you have a utensil or plate or something that sits near the microwave, it might nick the plastic coating. I called GE support (in India) and they said since its under warranty, I can return it. However Id have to pay shipping costs. Fortunately, I bought this at Wal-Mart (I hate to support this store but it was the only place I could find this style) and they have an excellent return policy and there is no charge for shipping. It was easy to call and request a shipping label within the generous warranty period. You might save yourself the trouble of a return or be very careful to not put a small hole in the plastic coating. Again, this is not protective coating for shipping, this is a permanent coating to protect the buttons.

Our stainless steel finish 1100 watt JES1142 microwave is around 2 years old. Within the last year the finish inside started to corrode (yes, my wife cleaned it regularly with a non abrasive, appropriate cleanser). Also, the door latch button started sticking and a few days ago it just stopped heating. Unfortunately I cant find my receipt, but I bought it at my local Lowes on Bell Rd. Nashville TN. Serial # is MA212483G. Manufactured July 2013. Was this just a lemon? Very disappointed.

I live in a condominium building with approximately 105 units. We all had the same GE microwave installed in our units approximately five years ago (contractor-installed). I sent out a mass email to all of the owners to ask if they were having the same problems I was having my microwave, which was the touch panel will not accept commands. I received approximately 15 complaints from various homeowners with the same complaint.When I called GE to tell them the problem I was having with my microwave, they told me a technician would have to come out and diagnose the problem. The service call would be $99.95, and at that time the technician would let me know what the problem was and tell me the charge for the replacement part and labor cost. I told GE Customer Service that there were many people in my condo building who were having the same problem and I wanted to know why each homeowner should have to pay the initial $99.95 service call fee? The response was, That is our policy. To placate me, GE customer service said they would charge me the initial fee but I would receive a 25% discount for parts and labor.In the meantime, two or three other homeowners made service call appointments for their microwave oven with GE. One homeowner was given a fee for parts and labor, which would have been only slightly less than buying a new microwave and another homeowner was not given a labor cost. In both cases, the homeowners did not go forth with their repairs, because buying a new microwave was more cost effective.I want Consumer Affairs to know GE grossly mishandled this malfunction issue amongst a group of homeowners who own the same microwave. Secondly, I realize the microwave ovens are five years old, but GE should have some record regarding failing parts along with the life cycle of this product. Lastly, I want GE to be held accountable for not telling consumers a repair cost for certain issues. There should be a cost per hour, not cost per broken item.I kept records of all correspondence amongst the homeowners of my condominium building, so I will be of great assistance if you need further help from me. Product malfunction is a GE Profile Spacemaker 2.0 Model # JVM2070SK02.

Almost 2 years ago and right from the start this dishwasher did not clean. Numerous times they had people come out and supposedly fixed it. Ive had different suggestions as to what to do. 1. Turn on the hot water tap and make sure its hot. 2. Use various different cleaning solutions on top of the dishwasher soap. 3. Use loose detergent.4. Throw at the bottom of the washer.One of the arms keeps falling down. And the last time I was told I could return it and get a deal on a better machine. I am now left with hand washing every item that goes into it unless I want gritty glasses, dishes and silverware. I bought this at Home Depot. I will never buy any products such as this from them nor will I ever buy another GE product.

The GE dishwasher was in place in the home that we bought in 2017. I like the stainless steel outer color, the noise level is minimal, which I like. The options for different cleaning levels are great. It does a good job at cleaning our dishes. My only negative comment is that it was new when the house was built in 2017. For the past three months it has been stopping repeatedly, multiple times, mid-cycle so that you have to repulse the start button multiple times to finish the cycle. It is barely three years old and seems to already be giving out which means we will have to replace it, probably soon.

I have a GE microwave. It stated that I had a 10 year warranty on the magnetron on the computer website. Now GE says its not warranted. I have owned this microwave for a little over a year and its pile of **. All they wanted to do is sell you their products and they dont stand behind what they make anymore. Nothing is made to last in this time and age. I will never buy GE products from Home Depot again.

We normally purchase LG appliances but this time we purchased a GE Profile induction range and GE Profile above range microwave oven. The relay went out on the microwave oven about six months after we got them. Their website for scheduling service is absolutely horrible and didn’t work multiple times and when I was finally able to schedule, it was two weeks out. I then called but was told I couldn’t get an earlier appointment. So we waited the two weeks, then they had to order the relay. GE waited until the part was delivered to us to schedule the return visit - over 2 1/2 weeks later! So at this point we are without our new microwave for over a month and a half. Moral of the story is never ever to tempted to buy from GE, LG appliances & cust service are great.

I have had it with GE! Only 18 months after install, my beautiful, stainless, three-rack, GE, top-dollar dishwasher will not turn on. Repair attempts have been futile. Tech said not to expect more than seven years service out of new appliances. Were tossing this junk and buying CHEAP replacements going forward since all we have to choose from is throw away products. OEMs like GE should realize they are shooting themselves in the foot with their planned obsolescence business plan.

GE over the range microwave JVM1540DP1WW - Within 1 year, the magnetron failed. I called the Sears service department to fix it. Because of that, I bought 2 more years of extended warranty. Three months after that, the microwave turned on by itself for 1 minute nonstop. I had to unplug it and call the service again. It would also turn on even when the door is open. Its very dangerous for microwave exposure!

If you have a choice, run away from GE like the plague, because if you have to make a warranty claim, it may become a nightmare. I purchased a new home May of 2015, and my wife and I paid for the appliance upgrade to the GE Profile, which werent cheap. Less than 2 months I noticed that the microwave had a burn spot on the bottom of the door where it sits against the exterior of the microwave, the paint was burnt from the metal, and the rubber seal melted. I did not think too much of it because the microwave still worked and unless you opened it you did not see it, so it wasnt so much of an eye sore. Fast forward to January 2016, my wife informed me that the microwave stopped heating, and that she was going to put a ticket in to New Home Warranty, I informed her that we probably need to go to GE directly as I knew that is what they were going to say. So I called GE and put in a Service ticket. They informed me that it was going to be a little over a week before anyone would be available to come look at it, to which I was OK with. The repair guy finally came. I explained to him in detail what the issues were. He opened the microwave, closed it back, wrote some things on his computer, and told me that he ordered a part called the magnetron tube, which sounded like something from the transformers. He told me it would be a week before the part would be ordered, so I asked him if it wouldnt be easier for them to just replace the microwave. He told me that it is a warranty repair and they have to try and fix it first and if not, then they will. The evening before the repair guy was supposed to show up to change the door and the magnetron tube, I got a voicemail stating that the part will not be received until the evening of the repair, so they rescheduled me for 2 days later. GE just assumed that I would be available, because I probably sit at home all day waiting for service repairs. I called back the number to see what was going on. I was adamant that they replace the microwave, because by this time it was already 3 weeks without a microwave. And with small kids in the house it was very annoying to have to put a pot on the stove every time you needed to heat anything. After 45 minutes, I was still nowhere with them, so I ended up sticking with their new appointment window. I was leaving for work 2 days later when I noticed the repair guy at another home in the community. I thought to myself why couldnt he have done our repair the same day if he were already going to be in the neighborhood? About 45 minutes later my wife called me and told me that the repair guy showed up to repair the unit, that they were supposed to repair a day later, only to be told that the damage on the door was caused by arching, and that it will happen again so the microwave is non-repairable, so they will have to replace it. He told my wife that she will be receiving a call from the warehouse within 24 hours to schedule the replacement once the microwave is available, but she could call the warranty repair department to see if they could expedite it. After another 25 minutes on the phone going back and forth we were told that it will be about 7-10 business days before the microwave may be available. Now it is good to note that the warehouse where they stock the product is only 2 hours away from where I live. So by the count of it by the time we receive a new microwave, it would have been about 5 to 6 weeks from the initial call to get the issue taken care of.

I purchased a General Electric model peb7226df1ww in 2013. It lasted two years, then failed. I replaced it and two years later the replacement failed. At least GE microwaves are reliable in that aspect. You can count on them to fail. I am convinced GE installs a delayed kill switch on their microwaves to help their revenue stream. This was the last GE appliance I will ever purchase.

New home community - all GE appliances. Model PEB7226SF2SS microwave scorching and catching on fire; GE doesnt stand behind their products and homeowners cant use because products our dangerous (per tech).

GE Microwave Model WES1450DN1BB 1.4 Cubic Ft 1100 Watt - This product is absolute garbage! This product was manufactured in June 2010 and I purchased it in approximately in May of 2011. So after 13 months of moderate use, the unit no longer functions properly. Needless to say, the product is out of warranty by about a month, so I pretty much now have nothing more than an overweight paperweight.I wont bore you with all the details, but for the most part, the touch pad stopped working and if left plugged in, the microwave will start on its own and run for up to a minute before beeping incessantly. If I unplug the unit and plug it back in, Ill receive a different error message, and so on. I wont waste my time contacting GE, because from what I hear, they really dont give a damn!When I was young, you could by an American-made product and expect it to last for many years. However, ever since greedy corporate America decided to ship all our jobs overseas in the name of profits, I have yet to find any imported products that are worth a damn. Instead of one good American product that would last a lifetime, I now have to purchase the same imported piece of ** many times over to get the same longevity. Maybe this is what GE wants?Needless to say, GE has now been placed on my Do Not Buy list. I guess I will now buy from another major manufacturer to see if their foreign-made garbage is any better!

Have been using dishwasher (PDWT380VOOSS) since May 2013. Dishes do not come clean and I rewash by hand... have followed all suggestions by consumer relations, service technician and manual…cant afford to replace appliance…GE willing to replace at an aggressive discount because the appliance is working as it was designed to…disappointed in performance of a profile appliance.

My dishwasher is a GE Profile. It is as quiet as a Bosch we had in another home we had but it must cost half as much. We have it 8 years now- no problems. Never had a service call or anything wrong with it. It owes us nothing.

We purchased a GE Profile dishwasher, model PDW9880J00ss, in July 2005, along with GE range, refrigerator and microwave oven. We have had nothing but trouble with them. Most currently, the power board did not shut off at the end of the cycle, overheated and melted the harness also. We were alerted when the odor of burnt plastic filled our home. It was fortunate that we were home and in the next room, or our house could have burned down.The dishwasher cannot be repaired. I will contact GE to see what, if anything they will do to compensate me, but I am not optimistic. I will never buy GL products again. I thought by buying top of the line products from a well-known manufacturer, I would have a quality product. I was totally wrong. Sometimes, you dont get what you pay for.

I have microwaved many types of food in mine! Remember, it’s not just for reheating leftovers! I have cooked fish, and chicken successfully. Those turned out juicy and tender. I follow directions from a microwave cookbook. It’s easy and clean up is a snap.

Last summer GE replaced the peeling handle on my microwave oven. I have treated the new handle with kid gloves. No abrasive cleaning products have been used and the oven burner under the handle is used infrequently at very lower temperatures. One year later its peeling AGAIN. All the burner control bezels on my GE Cafe oven have also peeled. The handles look like plastic covered with aluminium foil. Cant believe GE hasnt fixed this problem or issued a recall. I will NEVER purchase another products made by GE!

I would not buy G.E. ever again! I remodeled our kitchen and have had more trouble with all the Appliances! They were all G.E. Frig, Microwave, Dishwasher and Stove and cooktop! Had to be serviced, all of them the first month!

This is a very nice brand of microwaves. Has easy touch from 30 sec to 10 mins. Meaning you touch start for the 30 sec and press 1 for one min - just hit start after. The only bad thing is the plastic coating over the buttons is starting to rip. Not a big deal just doesn’t look as nice.

The little trap door which releases soap stopped opening when the GE top-of-the-line Profile dishwasher was one week past its warranty. Because of the design, all kinds of crud collects under the hinged door, meaning there is ALWAYS an odor unless we get down, hands and knees, to scrub it out. Features are fine -- as long as they work. Having a dishwasher that doesnt even dispense soap and cleanser isnt worth much, limiting us to the automatic feed with shine liquid. Stainless steel outside is impossible to keep clean. There are streaks and blotches within minutes of polishing with Sheela Shine. Suspect it has something to do with the humidity where we live, but it shouldnt happen. I find it strange that GE is perpetually sending me warranty extension offers for my refrigerator (which never fails), but nary an offer for the dishwasher or microwave/convection oven in the Profile line which have each needed repairs twice in the three years since purchase.

Been using this microwave more than 3 years, more than happy with it. It has out performed all of my prior microwaves some costing much more. Will definitely re-purchase this brand again in the future.

My GE Profile Dishwasher was serviced 2 years ago for a faulty electronic control pad. It made starting the dishwasher a complete gamble, you never knew when it would actually turn on. I paid a couple hundred dollars to fix this problem 2 years ago and of course it has stopped working once again. So frustrating! GE decides to replace one bad part for another bad part. I then asked for the service call to be covered since it was obviously the same problem but they refused. So, GE am I to keep paying $89 for service fees so that you can keep replacing one faulty part for another? STAND BY YOUR PRODUCT!

I wish I had seen this site first. I purchased a dishwasher. It didnt even make it 6 months. Took a month to fix and then 3 months later broke right before Thanksgiving. It is now Friday before Christmas still not fixed. GE is closed. The repairman and GE both lie and said it would be fixed before Christmas. Do not purchase anything GE. They do not stand behind their products. The products are poorly made and dont last. Ive had several dishwashers over the years. This is the first GE and it will be the last. You will have to wait over an hour for on hold to reach anyone and even then they just dont care. Save your money. Buy a didnt brand.

Let me warn anyone out there looking for appliances. We have had our 2 appliances for a little over one year, about 14 months. It is just me and my husband, very little wear and tear. Both convection oven and dishwasher not working. DO NOT BUY!

Our Profile over-the-range microwave failed after 2 years. (Warranty was for one year!) One day it suddenly died. The repairman ($100) said repeated twisting of the wire from the oven to the door (which contains all the electronics) is inevitable with opening and closing. The wire often breaks within its insulation: a bad design fault. No question of replacing the wire; we would have to order a new door, for nearly $400 plus $200 for installation, which requires 2 service technicians. This is more than the cost of a new OTR microwave. He advised us to get one with the controls beside, not in the door. Unfortunately GE is the only company that makes a microwave in the same colour as our range.

Purchased the cafe dishwasher in March. We are now on our second one as the first did not work and now this one does not work. It worked fine for the first couple of months and now it’s doing the same thing as the first one. Pump is on the fritz apparently. Truly disappointed. We owned the cafe dishwasher at our last house and loved it so we made sure that we purchased the same one when we bought our new house.

I bought the Cafe dishwasher model #CDT855P2NS1, for $995, it arrived defective with the wrong size parts inside causing the door to not shut properly (as inspected by GE repairman). This was over 4 months ago. Since then I have been told to call every two weeks to see when a replacement model would be available in the warehouse (each of this calls required sitting on hold for over an hour). Despite having many of this model dishwasher for sale on the GE website, I have been told for over four months to call back in two weeks, because none are available at the warehouse and this is the only place you can source them from.Now I am being offered the price I paid for the dishwasher despite the exact replacement now costing $1,277, from the same place as the previous one was ordered from. This doesn’t include the $149 to install the new dishwasher to replace the defective one that was initially installed, which I am being told will not be reimbursed. I just want to warn everyone about not purchasing this product or expecting any support from GE.

Our GE microwave just stopped working after 3 or 4 years. It was manufactured 4 years ago, but I am not exactly sure when we purchased and installed it... It may have sat on the shelf for a year. It is not the touch panel, the lights, timer, clock... They all work. In fact, I can put in a time to cook and push START and the timer will start counting down as if the microwave is cooking, but it is totally silent, no turntable, no noise, no nothing. The new replacement model number is the JVM6175 but I am scared to buy it, as I am so disappointed in GE. All the washers, dryers, microwaves, and refrigerators we have bought over the last 30 years have only lasted 3 to 7 years. The only appliance by GE we have purchased that seems to be still working is the dishwasher. We only used this microwave to heat up coffee or some leftovers. It is not being used to cook big meals or anything like that. GE has just gone downhill, it appears. I think I will just give up on them totally.

From these posts, Ive seen people saying that they couldnt trust GE American-made anymore. Our microwave oven was made in Malaysia, but GEs home office appears to be in Louisville, Kentucky. Our problem: peeling paint on the door and upper part of our 2009 GE #JES1451DN1WW oven. As a cancer survivor of 8 years, my antenna goes up with any defaults such as this. On a common sense scale this should never be happening. I was very sad to see no recalls on these items Ive been reading about and am frankly scared to use this microwave. Shame on you, GE.

Very convenient. Easy to use. Take some time to clean though, have to cover all food for splatter of food on the topside inside of microwave, have scour off with strong pad. Also it is not radiation free for health. But the microwave is easy to lift. The best thing about it you can cook frozen foods. Like meatloaf, beef stew my favorite, pizza, chicken.

We purchased this microwave in 2016. It worked fine for a few months then one day we go to use it and it would not start. It took pushing the start button 5 times for it to work and the express cook did not work. Then 2018 came and it was November 2018 and the microwave started to short out and started smoking. So we bought a new Panasonic microwave and so far so good. Would not tell anyone to buy a GE brand item ever again.

Have a six-year-old GE Tall Tub Café dishwasher (model#GHDT168V00SS) I purchased at Home Depot in Denver. Also purchased a 5 Year Extended Warranty that I assumed was through GEs Extended Warranty Opportunity. The dishwasher suddenly began leaking and ruined our hardwood floors (I know, wood floors in kitchen not good; tell that to the builder). I called GEs customer care number and basically talked to a scripted robot. You dont have a warranty through GE, its a third-part insurer such as Assurant, I was told. Not worth repairing, and the warranty expired a few months ago. I know parts wear out, but for heavens sake, cant they build a dishwasher that doesnt leak from the bottom, underneath the unit, where water will seep unbeknownst to people, eventually destroying the floor? Guess not. So, no more GE appliances EVER. PERIOD! Switched to Samsung, LG and Maytag. Now, gotta spend a couple grand ($2K+) to repair the hardwood floor.

After 22 months of use, the microwave stopped heating. Youll see the same problem all over the internet. Lights turn on, plate spins but no change at all in temperature. The repair call was estimated to cost more than the price of the microwave. Its almost like it was planned. Never buying a GE product again.

Ever since I bought this dishwasher in Jan 2014 it hasnt dried properly. Finally had a tech come out and he told me the water wasnt hot enough. How is it energy efficient if I have to raise the heat in my water heater to get the dishes to dry???? Very dissatisfied! My old dishwasher (with plastic lining) dried the dishes with no problem. I had it for 16 years before I had any problems with it. This new one is a problem from the first time I used it. No GE ever again!

I work as a service tech for a major insurance company. I am a master tech, and master electrician. The company that I work for owns an apartment complex which is used to house company executives whose offices are located at other sites, but often come to the Chattanooga Site to work short term. I was called to repair an old dishwasher in one of the apartments. Upon looking at the existing dishwasher, I decided to replace with a new one. I received a new GE model GDF 510 PGD 1WW dishwasher on November 8, 2013. As usual I unpackaged the appliance and examined the exterior. Finding no visible damage, and with the help of a master plumber, I removed the old dishwasher, and installed the new one. After all the connections were made, I opened the door, removed all the packaging from the dishwasher, and found the upper spray arm lying in disarray in the bottom of the machine. Assuming that this was the way that the machine was packaged, I installed the spray arm, plugged the machine up and started the machine as the operations manual instructed. The machine would not work. The power lamp would burn solid for a few seconds and start flashing. I tried to start the machine a number of times while reading the instructions, and while my partner read the instructions aloud, but with no results. Finally, I used a screwdriver to hold the door switch closed, pressed the start button and the unit started. The catch mounted on the door would not make the door switch, mounted on the machine body. We tried to adjust the switch and the catch, but with no success.The dishwasher did not show any signs of exterior shipping damage, but for some reason the upper spray arm was off and lying in the bottom of the unit, I found a small piece of broken plastic and a screw in the bottom of the machine, and the door switch would not make. Outside that I have no complaints. I am not sure where this machine was assembled, but it certainly was not equal to the machine that we removed. Thanks GE for making my job harder. I will have to find another dishwasher Monday and replace the damaged one, and perhaps send this one back, but the replacement will certainly be another brand.

We recently purchased a new GE microwave and are pleased with its service and price. The microwave is attractive and seems to be constructed well! We would buy another GE product and feel that they provide quality in appliances!

A recall on a dishwasher: The heating element was replaced due to the fact they said it could catch fire. The bottom of the dishwasher is plastic. They replaced the heating element with the same kind of element that was there. How could that be any safer if the bottom is still plastic? I have children in the house; I feel this is a dangerous situation. I am dissatisfied with GE. This is the third dishwasher with the same problem in a matter of 5 years.

We sent the rebate form in, and they denied our claim. It was for a dishwasher that was recalled. We had to buy another one and only received $100 for the rebate after having to spend $500 on a dishwasher, but the rebate was denied! Unbelievable. We have written GE and the FTC with no response.

In early 2017, we bought all of our GE Profile appliances including the dishwasher through our builder as part of building a new home. Love the slate exterior. Love the whisper quiet of the appliance. I do NOT like the way it cleans my dishes. Most of the time, the soap isnt even distributed. The soap compartment is opened but most of the soap is still there. Ive followed the instructions on loading to ensure my dishes arent blocking the water that is supposed to spray up and help distribute soap. Even though I select the dry function, my dishes are sopping wet when the cycle is finished. We have to catch the end of cycle and crack the dishwasher open to let the steam escape in order to cut down on the wet. Even then, we still have to dry dishes to put them up. We have a water softener and have verified its working so I know thats not causing these issues. I would not recommend this dishwasher.

GLD6560L00SS. My dishwasher (Model number:GLD6560L00SS) was producing large amounts of smoke through the face panel. It filled my kitchen with smoke and produced a strong smell. I contacted GE and they sent a service repairman out and he took a look. He said this problem is very uncommon with this specific unit and he has never seen something like this. After he removed the front panel, we were welcomed by a burnt/charcoal black face-plate. There was an internal fire in the machine. To fast forward I have been working with GE the last 3 weeks and they have offered to cover 50% off a new unit. I cannot afford this even with a discount and they will not cover the cost of a replacement. This problem could have been much worse if I was not home. The house very well could have started on fire. We normally set the unit at night and go to bed... Thank god this was a different day. This kind of thing is unexceptionable and the fact that they will not cover.

I purchased a microwave in Oct 2010. It went blank and nothing works. I checked to see if its receiving power. The power is okay. I purchased the microwave, fridge and stove at the same time. I always had confidence in GE products. Microwave should have lasted longer than less than 2 years. I didnt purchase extended warranty because of GEs reputation. Very dissatisfied customer.

My GE over the range Microwave has broken about 4 times in a years time. My warranty company American Home Shield (AHS) has decided that instead of replacing this piece of garbage, its somehow worth it to keep on fixing it, which is apparently their MO for all their customers but I digress. After the latest breakdown (microwave lost power completely), I was referred by AHS to GE Appliance repair. Thus began the nightmare. The tech that showed up was incompetent at best. He showed up, looked at me, made a grouchy face and proceeded to walk in the kitchen with an attitude like he was doing us this massive favor. He opened the microwave door, closed it, opened his computer and ordered 10 (yes 10) different part. Again, he literally just opened and closed the door - did not disassemble to see what part was actually messed up. No diagnosis done of any kind. He scheduled to come out the week after that - didnt show up because I missed his phone call. Btw, I called him back pretty immediately and he didnt pick up. After being on hold for about 35 mins (which is clearly the GE standard hold time), they tell me the guy has left the area and they need to reschedule me for a week later. The day before the 2nd appointment, they called to reconfirm and then the morning of, I called, stayed on the standard 35-40 min hold and reconfirmed he was still coming and was told he was on his way. Well, the appointment time came and went and he failed to show up YET again so I called to ask wtf happened. They said he didnt come because I canceled the appointment thru an automated call. This time the idiot didnt call me like they always do. I asked for proof of this alleged automated call that was placed to me and they said no call record exist and so while it seemed like a system glitch, the tech already left the area and theyd need to reschedule it. I told them, No, thank you. Got a local repair company to come out the very next day. Turns out, out of the 10 parts that idiot tech had ordered, only 4 had arrived while the invoice still showed 10 being shipped. Let me clarify this: All these issues stem from GEs entire company: From manufacturing crappy products to HR hiring incompetent techs to customer service being absolutely nightmarish to supply chain not sending parts that are being ordered. And if you can somehow get their alleged consumer advocate department on the phone after a 40 min hold time, they dont give a crap either. All these employees MUST hate GE to drive customers away as far as possible. I own a business and I will never ever EVER buy GE again.

We purchased a GE Over-The-Range microwave, model LVM1750DM1BB in late 2008 and had nothing but problems with it, from paint peeling off on the inside to buttons which did not work, to burning smell, until it finally quit completely. Nothing worked, nada. This was not a cheap microwave and, added with installation expenses, was a major purchase. Even so, it would cost more to have it repaired than the original costs combined. This is criminal, a total rip-off!

I have a new GE profile model PDWT380VSS - Two in fact. The first one kept breaking glasses in the top rack. GE technicians could not find an answer so they replaced the Dishwasher. Now six months later its doing it again. This replaced a perfectly good, older model as part of a remodel. Theyll be sending another tech who I suspect will not have an answer. Any thoughts on what could be causing this or a way around it or is it to be expected? The first GE profile I had for several years with no such issues.

Have had my GE dishwasher for 15 years. Had initial problem with inner liner pulling away but got GE to replace unit. Has worked fine ever since. Nothing fancy just gets the dishes clean. Would have liked a bit more adjustability with the shelves.

After having my Cafe Stovetop for about a year and a half, there was a electrical component malfunction. During this, smoke came out of the stovetop and it smelled of electrical burning. I sent a complaint to GE since several components were damaged. Knowing that the warranty was only for 1 year, there would be nothing they could do except sell me the parts.

PVM1870SMC ($580 plus tax/Cost CDN). I bought all new GE Profile units in mid 2010 for my new house. I spent $7000, plus tax, for 4 items from a reputable company in Hannon Ontario. I bought a Fridge, Dual fuel range, Dishwasher and last the Microwave, model stated above.About 6 months back it started acting funny, but thought not too much of it as it was very intermittent. Today the Microwave will NOT seem to shut off after it beeps from cooking/warming up food and the door is open then closed. I close the door and it starts to hums. If food is in it, you can see it is still cooking. I open the door, and then close it again and it starts to Humming as soon as the door closes.The glass tray does not turn, nor does the light go on (when humming) as it does when you actually push the start button. If you do start it, everything works, that is the table turns, light goes on and it cooks/warms food etc. Then it beeps when done, you open the door to remove items, close the door, and again just starts humming.I unplug it for an hour, but as soon as you plug back in, again.. Hums until you open the door. I put a cup of water in it, and just closed the door, did not push the start button. After about 40 seconds, the water started to boil.

My GE microwave works perfectly for microwaving and baking. It is also a convection oven and it works as well for baking as the microwave component does for microwaving. It is roomy and accommodating. Ive had the microwave for 10 years and have never had a problem with it.

The microwave is over the stove with a vent. It is about an 1100 w microwave. I just have to eat out a little bit more time here are the ones that are bigger. The price was right there and that I would’ve bought something else.

We bought a GE cafe series microwave (model/serial number: pnm919sf1ss/gd235771b) and 4 months later it ceased to function. We just had a remodel and for the first time had an expensive, over the oven microwave and were very excited. Unfortunately, unlike the 2 cheap microwaves weve purchased in the last 36 years, this one we had used for 3 months total, developed problems. The motor seemed to surge and then it would go off. Half an hour later it came back on but would only work for about 5 minutes at a time. I called GE and they arranged for a local company to come take a look. They insisted on a 4 hour window and fortunately my husband is retired so he could be there. The repairman came and didnt have a clue as to what was wrong. He called his boss who talked him through diagnostics. After an hour he left, saying hed be back in a week with some new parts. Again we had to wait the 4 hour window. He came in and we were on pins and needles hoping he wouldnt scratch our cabinets as he took the unit down. He replaced the microwave component and when he left it worked. Two days later it again died. I called the repair people and they told me I had to call GE to get permission for another attempt at repair. I called GE and they said I had to call customer service to file a report. They told me I had to make an appointment for a technician to come out to see if the microwave could be repaired. Really??? The technician would try to repair it again or decide it couldnt be repaired and needed to be replaced. Like we have nothing better to do than wait for these repair people who have no clue as to how to repair the microwave. Every time they take down the microwave they risk ruining our cabinets. It was so unhelpful. I am really disappointed in GE customer service. We had to go out and buy a microwave to use while we were waiting for the repair. They obviously dont care that we cant use their expensive product. Our replacement microwave was $40 from Walmart and works beautifully. We finally complained to our WONDERFUL contractor who originally purchased the microwave for us and he is replacing it with a new one. He was appalled by GEs treatment. He takes note of appliances that are crap so he can warn customers. I thought I was buying from a reputable company and thinking we were getting a great and special product. Too bad.

Needing some type of warning to indicate a clog or break down. Cycle: Pots & pans; heavy wash; normal wash; light wash; hot start; high temp. wash; heated dry; energy saver; cycle on: plate warmer; start delay (hrs) off, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1; Hot start plate; Pots & pans start; heavy/normal; high wash; heated dry off-rinse only. The color fits my kitchen arrangement. Needs to have a better warranty coverage. Needs a longer warranty on the basic coverage. Do away with extended coverage. Offer all parts and full labor for a longer time.

I was washing the inside of my microwave and noticed that paint was peeling off the top. It looked like paper. Reading the other comments on the same problem I knew it would do any good to contact GE. GE products have always been inferior to other brands in the market.

Microwave Model JVM1750DP2bb defective construction- Plastic is protruding inside the Oven. Took possession of a new home in January 2014, but only occupied part time. I estimate we had the equivalent of 6 months being occupied. In January 2017 the magnetron broke down, at which time I noticed a piece of plastics protruding inside the microwave through a vent hole on the Magnetron side. I did not take the extended warranty and GE only offered to send a repair man. Since this is an over the stove model venting outside, it had to be repaired or replaced. Checked with the supplier and they estimated a minimum of $ 300 repair cost. Home Depot had model JVM6175DKBB on sale for 249.00, and with delivery, and installation, were talking $ 350.00 to $400.00 to replace. I got in touch with GE Consumer Affairs, and they did eventually agree to provide the JVM6175DKBB for $ 270.00 including installation. They will take possession of the old model, so there wont be any way for me to confirm or deny a manufacturing defect.

Unfortunately, the GE dishwasher came standard in the new townhouse I bought. It is horrible! Within the first year it smelled like sulfur every time I turned it on. I tried cleaning it from top to bottom, but there is always grime after running it and a film on the dishes. Ive had dishwashers all my life and never experienced such a shoddy piece of **. I had many brands of dishwashers over the years, except for GE, and I dont remember having to take it apart and clean it once a week. If I dont clean it once a week it stinks!!! I couldnt stand the smell and finally called the GE repair expert. He knew less about the dishwasher than my cat. I could have purchased a new dishwasher for what I paid for the service call. And he talked to me like I was an idiot. DO NOT BUY A GE DISHWASHER or use their service. I wish I could give it minus 5 stars.

I bought a GE Adora dishwasher from Home Depot. There is nothing technically wrong with it - in other words - it is not malfunctioning. It is just that its normal operation is AWFUL, in my opinion. The PROS: it is very quiet. The CONS: it does not clean your dishes! And since this is the primary function of a dishwasher - I would say it is a complete failure. Originally, I had hard water, and I thought that was probably the issue. I purchased a whole home Kinetico system, which remove almost all particulates from the water, and makes bottled-water-quality drinking water. (On a side-note, I would TOTALLY recommend the Kinetico system!) But even after having the water issues fixed, the dishwasher has NEVER worked properly. I have used every type of dishwasher detergent, including Cascade Complete & Platinum, Finish Ultra & Quantum Powerball... and I have also added rinse agents etc. Basically - whatever state your dishes are in when you put them IN the dishwasher, they will only be slightly improved when you remove them. Even if you SOAK the dishes first, they come out with all kinds of residue. It does an especially horrible job on glassware, but silverware is also terrible. And I have to re-wash by hand every coffee cup that comes out. I truly loathe this machine, and will replace as soon as I do enough research about a better brand & model.

Getting great service out of it. GE Dishwasher is a good unit for the money. Its does a really good job when loaded properly. I did just extend the warranty for another year. I am very happy with it.

6/11/2014. My microwave of 5 years the GE Adora starting to act strange. It would start to hum and the panel light would light up. The humming would only stop if I opened the door. Sometimes it would stop on its own. But today the humming kept continuing and I thought it was harmless until I heard a loud pop in the microwave and smelled something burning. The microwave glass turntable had exploded from intense heat inside the microwave. It was bizarre. Immediately I ran over and unplugged the microwave hood. In all the years and houses I own, this is the most expensive microwave I have purchased and it has lasted me the least amount of time! Microwaves shouldnt start on their own and thankfully I was home when it did. Otherwise my house would have burned down.

I know this commonplace complaint, like thousands before me, will head straight into the wind because the world just works in this way: technical support and repairs works as a profit center for a corporation. My GE Profile microwave abruptly failed out of warranty after years of use. The cause was due to a wire burning up inside that had not been loosely connected, said the GE technician, so this was an issue of inadequate quality--not bad enough to cause the microwave to fail quickly but enough to cause failure over time.After taking the microwave out of the built-in cabinet, it only took the technician about 5-8 seconds to find and diagnose the problem, several minutes to get the right part (a wire) from the truck, and a couple of minutes to fix it. The labor charge was $121 for about 7 minutes of repair work, to be liberal with time. (This charge is separate from the charge to come to our home and diagnose the problem.) This prorates to over $1,000/hour for a basic wiring change, which I think is exorbitant. I understand that the technician is a highly trained individual, but this is already reflected in the high labor rate.According to GE, the cost to replace the built-in microwave, which came with a matching stainless steel frame would be $550 if we wanted the new microwave to match the frame at least (but not necessarily the oven, stove, etc.). This is the kind of cost you dont think about when you buy a new home built with matching appliances--well, I didnt. Companies like GE can rationalize all they want about all the overhead associated with servicing a repair call. I can certainly grant them some leeway, but in the end, charging an extra 8 times more an already high labor rate given the time needed to fix the problem is simply price gouging a consumer who has no good recourse. (This is why I pretty much avoid repairing anything, except for my car. Its almost never worth it.)I recently had an experience with an experienced plumber charging an hourly rate of $150, prorated by and rounded up to half-hour increments of work, regardless of difficulty of work. Repairing an appliance should work the same way, and my GE bill would have been halved. Because of such profiteering, I will not consider purchasing a GE appliance in the future. I pray that this microwave doesnt break down again in the coming years due to some other problem. It would be a lot less expensive to just buy a non-matching portable microwave then for $100-$150 than to keep up appearances.To be fair, the woman who fielded my service call was courteous and empathetic. Because the microwave apparently had an electrical burning problem, she previously waived the diagnosis fee. Otherwise, my simple repair would have run several hundred dollars, more than the cost of the microwave. However, she was unwilling to reduce the labor charge, so based on how strongly I felt ripped off, I give GE a star rating overall.

We had a GE dishwasher installed by the builder when the house we live in was built and it was one of the ones which were recalled as a fire hazard. We didnt really have any issues with it though, other than it was a bit noisy. With the credit offered, we decided to upgrade to a high end Profile model. The sound proofing is impressive and it was actually hard to tell the unit was on, but that is the only thing you can say that is good about the machine. As a dishwasher, it fails miserably and often items come out dirtier than when they went in. OK, weve struggled on with that for some time now but today, a nasty burnt plastic smell brought us both to the kitchen to investigate. Sure enough, the replacement for the fire hazard was the culprit. Obviously, it will need some serious repairs before it is safe to use once more. Looking through this and other sites, it seems this problem is rife and GE is reluctant to deal with the issues. Well I think that will be our last GE appliance. Thank you very much and rather than throw good money after bad, we will put the repair costs towards another machine ABGE.

GE Profile microwave Model: PEB7226SF1SS came as part of the builder installation. In the first year had issues with the microwave not starting intermittently and had to call GE support who sent in a technician who had to work on the door alignment and the switch was the problem which said to have fixed. About 2.5 year from purchase the heating seemed to be irregular which we did not take much notice and then it stopped working completely. We called GE support and did get the usual routine of the product being out of warranty and have to pay for the technician. While scheduling they realized they did not have a their own service person in the vicinity and was advised to reach out to local service person.Local technician diagnosed that the magnetron has gone bad and advised most manufacturers have 10 years warranty on the magnetron as they are supposed to last for a long time and I should reach out to GE. Having reached out to GE support again to our surprise were advised that unlike most manufacturers this product did not have 10 year magnetron warranty. Customer service, part service and customer relations kept redirecting to each other. GE does not provide an option to sell the replacement magnetron to the customer and now want their authorized center to be engaged and paid again to have the part ordered and installed. Disappointed with GE product quality, their stand on warranty compared to their competition and their service which has given me run around and no solution. I have written to them asking for solution which they havent responded yet.

The jvm3160 series has a known defect in the door interlock electrical system that blows the unit fuse if the door is opened while the mw oven is operating. This usually occurs after the warranty expires. Cost to repair can exceed the original cost of the unit. Mine failed in warranty but it took them 10 weeks to fix it. The reason it took so long is that GEs repair protocol calls replacing the whole door (which has NO electrical parts in it) instead of replacing just the latch assembly because the labor cost to replace the latch itself exceeds the cost of a complete door assembly. Door assemblies were on back-order because of the high failure rate.

GE Triton XL dishwasher overheated for no reason and melted the inside components to the point they are scorched black. This dishwasher is worthless. There would have been a possible home fire if we were not at home at the time of incident.

Model GLD5660V00SS - seems to be an entry-level dishwasher compared to others I have used/had in the past. It is rather small inside - usually have to run it every day or every other day for just two of us. It is plastic inside and the wheels have already come off a couple of times even though Ive only been using it since July. Having said that, it does a decent job cleaning and is easy to load. The outside with the stainless panel is attractive and the controls are easy to use. It has a large, removable silverware bin that keeps silverware from nesting. However, the holes are not large enough for the knives to fit in properly. The tops are removable, so I can just put them in another section.

I called to see if someone can help me figure out why my built in microwave is running but no heat. Apparently the customer service keeps insisting I need to schedule a service without offering any kind of help. Why do I have to pay for a service trip when I can fix it with the right part? Unlike other appliance they always have customer service helping to see and figure out what might be wrong to the appliance.

The GE microwave that was installed in our new home (2018) stopped working in June 2020, after the nuclear reactor “blew up”. Which could have been a dangerous situation. I was told by Assurant Insurance Company that it was no longer covered by the 1 year insurance policy, and if I purchased a new policy for $241.00, they would repair it or replace it. After they discovered it was not repairable, they denied the ”replace it” part and reimbursed the money for the policy. GE agreed to sell me a new microwave at a discounted price, which I agreed to. The replacement microwave was delivered damaged, in October 2020. After many calls and waiting hours on hold, service came out and said it was “not repairable“. Again, phone calls to GE Customer Relations and reexplaining the problem, I was told they did not have a microwave in stock to replace it. However, after further searching, one was found, and would be delivered. On 10/23/20, I received a phone call from the freight company that the microwave was being delivered the following day, but they had the wrong address! it was a previous address. Where that address came from is a mystery as we never had GE appliances delivered to that address. The freight company was not authorized to change the address in the system, so another call to GE. I am still waiting for a new microwave! I can’t even begin to count the number of times I have called GE, waited on hold or call-back, waited for service, and been told I have the wrong case number. I have all new GE Profile appliances, all have had service for problems. I will NEVER buy another GE appliance. Their service department and Customer Relations department is disorganized and incompetent. GE appliance are not quality products.

Bought a GE Dishwasher on March 31st 2017. Used it in April & May, left June 1st for the summer so dishwasher was not used for 2 mo. Tried to use it in August when we got back it didnt work. Would not pump water. Called GE. They sent a service tech. out, replaced the pump, still didnt work. So next week they came out again & this time ordered a Computer board. Ever since then they have came out twice a month to repair dishwasher. Always something different. I requested 3 different times to have it replaced they refused. So I straight up asked if they were just trying to run me out of warranty & then drop me. Well, guess what - they came out for the last time on 4/5/2018 to repair it for the last time out of warranty. They turned me down every time to just replace it. WORST PRODUCT EVER. WOULD NOT RECOMMEND IT TO ANYONE. WORST CUSTOMER SERVICE EVER, POOR POOR POOR.

I remodeled my house 5 years ago and went with the GE Profile appliances in my kitchen. Last week I had run the dish washer cycle and noticed the soap had not dissolved and the dishes didnt seem to be clean so I ran the cycle again. I started it at about 8 pm and we went to bed not thinking any more about it. About 1 am I awoke to a horrible plastic burning smell. I checked through the whole house and could not find where it was coming from until I entered the kitchen. As I entered the room my eyes started streaming from the burn. I opened the dishwasher and smoke starting bellowing out of it. Not just smoke but a toxic smoke filled the room. The inside of the dishwasher was so hot and everything plastic inside was melted. The bottom drawer and parts of the dishwasher were also melted. The silverware tray full of silverware was all melted together. This all occurred in a matter of 5 hours. Had I not woke up when I did, who knows if we would have woke up.The house was full of toxic smoke that did not trigger the smoke detectors. We just went ahead and purchased a new dishwasher and had it installed yesterday. This morning my husband decided to do a little research on this product and found there was a recall last year. I contacted GE and found that our model was not part of the recall because it has a stainless steel interior, only the plastic interiors are part of the recall. I also found out that had we called them and had them send out a certified GE technician look at it, they would replace it. Too late it has already been replaced and sent to the recycle center. I did take pictures and have record of the model and serial number which doesnt matter. I just want to get it out there that this product is also dangerous and a fire hazard. This product could have easily caused a fire in my home. I also wish I would have done more research before we replaced it. Our new dishwasher is a GE Profile...

We bought our first new dish washer 2.5 months ago. It has never worked since we got it. Figured out it was the door. We have called SIX times to GE to have someone come fix it They told us that their systems were changed and that they would take care of this! No phone call back or anything. I finally had to called the service people my self. Whats the point on a warranty if your not going to help. I will never buy another product from GE again!! I am VERY disappointed in the service. If you say your going to take care of it and call me back, then take care of it.

I purchased a this GE Model CDT845P2NS1 on Oct 2, 2019 and the unit was received Oct 23, 2019. I installed the unit approx. 4 days after receipt and dishwasher functioned well until November 10th, 2020 when the unit failed to pump out the water. I contacted GE Service (MabeService) and was advised that the unit was not under warranty and as such I should contact a GE Canada authorized service centre.After several attempts to get someone to come to our location at Sharbot Lake we got hold of Capital Appliance Repair in Ottawa. They were not able to send a technician until November 18th. After diagnosing the problem the technician advised we needed a main control board and would have to order one and then come back to do the install of the control board. It is now February 21st 3 months after the visit and I’m being told that the part is backordered and they have no idea when it will become available. I’m extremely unhappy when you spend over $7,000.00 for a GE CAFÉ gas stove, Microwave, Refrigerator and dishwasher to find out you cannot get parts in a timely manner. As a customer of GE Canada I have had no help is solving my problem. It is not acceptable to have a 1 year old dishwasher that has failed, much less waiting for repair that has taken over 90 days to get repaired. DO NOT BUY!

Microwave oven 2008 - The food doesnt go around anymore. The glass insert does not turn. What can I do?

I just built a new home and opted for all GE Slate appliances. No problems so far with microwave, fridge, and stove but the dishwasher has never once been dry or cleaned all dishes. We have had it a little over a month! Today when I went to run it, there was mold growing! I had a KitchenAid for 9 years and never once did any of this happen. From reading other complaints, it looks like Ill be living with this for some time. I will never purchase GE again.

If I could give it less than a star, I would. We bought the GE model JEB18600M2WW as a wall insert microwave earlier to replace a 1999 GE of similar version that went out earlier this year. We use it 2-3 times daily, 30 seconds here, 2 minutes there. Today, I went to warm up the babys bottle, and it made a weird sound and went dead. Im sure its the same thing everyone else is complaining about. I wont be buying another GE microwave again.

Bought all new General Electric Appliances in 2002. Dishwasher, Washing Machine, and Dryer replaced after 6 years. Handle on Advantium Microwave replaced twice at the cost of $50 for handle made of plastic? Today our house smelled like burning plastic which upon inspecting dishwasher, found the heating element was COOKING everything in dishwasher. Got so hot that is melted the silverware bin and anything plastic in dishwasher. Glad we were home to unplug unit which we could not reset the controller on door of unit. Consumer Product Safety Commission is aware of this incident and is VERY common complaint with this Manufacturer. I have been on hold for 30 minutes with GE consumer relations phone number 1-800-386-1215. Was told by automatic system wait time was going to be 5 minutes. Figured I would write complaint on here as well while holding...READ CONSUMER REPORTS and stay away for General Electric Products!!! Model Number is PDWF480P00SS. Serial number is GS734641B.

GE is a very reliable name brand with history to back it up. I’ve used their washing machines for years and only changed out once due to newer features. I had Thebes first washer for at least 10 years, maybe a little more. It only needed one part replaced, that was the capacitor, otherwise it was still usable. I am not an in depth handy person but I will read and do my research and found directions doable. Additionally, I found the service help desk very informative and that’s how I discovered it was the capacitor that had gone bad after washing clothes for so many years, and believe me, I did a lot of cycles with my kids and family. I feel I got more than my money's worth. Lastly, I’m still using their products to this day. I may not have the frequency because we are empty nesters but I still believe in their products,

Our GE microwave does all the things you would expect from a basic microwave. It cooks vegetables, reheats leftovers and warms coffee. It looks nice on our counter. Do I think it is worth the money we paid for it, NO.

This is the second time that my GE microwave oven is peeling the paint on the inside of the oven. We paid over $240.00 the first time and think that this is a serious flaw this particular oven has. I think that the company should be liable, not the consumer.

Very quiet and cleans a large volume of dishes. Love the silverware rack and the overall look of the dishwasher. Also great value for the money. Though we have only had for three years it has held up great.

Over-the-range microwave failure (model JVM2052, manufactured Dec. 2010) was purchased and installed professionally in March 2011. Total cost is $546. First, the fan failed in about June 2012 and I thought I can live with this. In Sept. 2012, the unit failed, but the interior light and clock still work. I paid $97.00 for a service call from the dealer, and the tech said the power source failed(?). Estimated parts and labor for repair is $370. So, I will buy a new unit (not GE) and pay about $150 for delivery and installation and take away this GE unit. I live in Morris County, NJ and this is not a rural area! GE service rep whom I called said GE doesnt service this area and to look in the yellow pages for an authorized dealer. I called again and got the name and address of the president of GE Appliances, and I am going to write about this product.

Microwave lasted 6 months, very light duty, burnt metal smell. Purchased from Walmart, they told us to contact GE. All GE could offer is a Good Will certificate which means, we have to go buy another GE microwave up to $155 in value. We pay taxes, shipping etc. Not really a customer-centric return policy for a lousy designed product made from cheap components in Asia. These microwaves are a piece of junk. This isnt the only complaint about this model of microwave. Others are experiencing the same problem all within the past 6 months. From March 2018 thru August. Stay away from these microwaves.

We moved into our new manufactured home in May of 2013. That is the month our above range built-in GE microwave was installed. In October of 2013, one of my sons heated a frozen chicken cordon bleu serving for 3 minutes, 45 seconds, according to packaging directions. He said that some of the inside of his food was cool, so my other son put in his serving for four minutes, zero seconds. All of the packaging was removed and each serving was placed on a separate Corelle plate and covered with Glad microwave-safe plastic wrap. While heating the second serving, the microwave started on fire. Fortunately, my son extinguished the fire before it spread. The food did not combust. The fire seems to have started from the ceiling behind the fan. The entire inside of our microwave is clean except for the soot that billowed out from the center of the ceiling. When the service tech came, he scrubbed the soot off of the ceiling with some paper napkins (which he left inside of the unit) and said that the microwave was a total loss. He also said the fire was caused by misuse, because plastic wrap is not meant to be used in the microwave, therefore even though the fire happened within a year of purchase and installation, our warranty was void. I asked GE to get a second opinion and they agreed to send a third party servicer (A&E) who stood me up three times! I finally got to schedule a GE tech to come at the end of December and they sent the same guy who said the fire was our fault! He told me that he never said plastic wrap is not meant for the microwave, but that we are being dishonest because fires only start when the food is left in the microwave for too long. He accidentally let it slip that he is seeing the same problem with GE microwaves in a lot of new construction for student housing in Tallahassee. (We live 20 minutes south of there.) He attempted to recover GEs reputation afterward by saying that of course it was the students faults, too, for misusing the microwave units. Anyway, GE has graciously offered to sell us a new microwave at slight discount. Haha, no thank you!

Ive had this stainless steel GE Dishwasher model GDF645SMONES with the controls in the front for nearly a year. The dishwasher constantly comes on with the slightest accidental touch. However the buttons that control the cycle settings are extremely difficult to operate to cancel the lock or delay hours features. I have to literally bang on the buttons to get a response. My thumbs are now sore from the constant pushing to cancel that lock and delay features that came on accidentally. Once locked, good luck in canceling anything. Im so disgusted with this $600 dishwasher. Complaints to GE and the so-called warranty company that turned out to be one and the same, have fallen on deaf ears from the day I got it. Do yourself a huge favor, do NOT buy this dishwasher. Customer service is awful.

My GE Profile Dishwasher is a plain Jane without the bells and whistles, yet is a trusted, working appliance. Honestly, the only beef I have with this model is that plastic articles do not dry completely unless placing the controls on Heated Dry, and leaving the dishes in the dishwasher for the entire drying cycle. I have had my kids place some dishes in the dishwasher, caked in day old food. I left the plates in the dishwasher, hoping to teach my kids a lesson about rinsing off their dishes before placing them in. Imagine my surprise when after running the dishwasher through its normal cycle, the plates came out spotlessly clean! Impressive!

My GE microwave is not complicated to use. When cooking prepackaged dinners it cooks perfectly in the time the food instructions say it will. I have used other microwaves that the food is over or underdone. No problems with defrosting fruit either. I am very pleased with cost and performance.

Ahhhh me, here we go again! Its no wonder that the state of business in this country is not as solid as it could be. I purchased your GE dishwasher, Model #GDF540HSF2SS, Serial # ZA703816B, on 01/19/2014 from Lowes Home Centers, 3805 Northern Blvd., Rio Rancho, NM 87124. It was delivered and installed soon after. Soon after that, mid to late July, it began to flood our kitchen. A service call had to be made to replace the tub gaskets. Covered under initial 1 year warranty.Here it is the 5th of November, 2015 and now the unit does not function at all. A service diagnostics call performed today the 6th of November to ascertain its ailment to the tune of $89.00! (No, we didnt purchase the Extended Warranty. My belief has always been that the option to purchase an extended warranty is; 1) an opportunity for the company to make extra money on the sales of a product, and 2) an admission by the manufacturer that the product is probably not well made and will probably break down sometime in the near future!) I guess that future is here for this product! It almost lasted 2 YEARS!! Deplorable! The last dishwasher I had was almost 20 years old and the only service to it was to replace a water hose (which I did myself). Diagnostics proved that the electronic motherboard failed!In addition to the inconvenience and the $89.00, Id be willing to bet that the replacement part for this unit will cost 1/2 of the original purchase price of $599.00! AND I WAS CORRECT; the replacement board will cost $269.00 to replace (part and labor)!!! What a rip-off! I will never purchase another GE product as long as I live! And I will go online and register my opinion and complaint about this product with the Consumer Services Bureau and any place else that I can find to vent electronically!Recently the Sandoval Economic Alliance attempted to lure GE to establish their Headquarters here in New Mexico. For various reasons, we did not make GEs shortlist for consideration. I am thankful that we didnt make it! Why would our state want such a crappy company embarrassing our state with their crappy products? I will be sending a copy of this complaint to them as well.

We bought a model PVM9215SK3SS microwave as part of an over-the-range microwave oven/extractor fan combo. Unlike every other microwave combo weve ever had in our frequent moves, this microwave cannot run the kitchen timer independently of the microwave. If you try to set the kitchen timer when the microwave is running, the cook-time changes and overcooks whats in the microwave. If you try to set the microwave to cook while the timer is timing a food cooking on the range, it simply refuses to work. The instructions are very hard to both find and then understand, having been written in China to cover many different models. Apparently I can ask my phone to turn it on. I sure cant manage that very often in person! The fan is too loud for comfortable use even at the lowest speed, which is a great disappointment. A former Profile model was very quiet at every speed, and much more efficient. Were saving up for something that works.

Purchased the Maytag MDB7749SBM stainless steel dishwasher in December 2013. The dishwasher and install totaled $700, which for that price and with Maytags past reputation, I wrongly assumed that the dishwasher would last a long time. In May 2016, slightly over 2 years, the dishwasher started having issues with the control panel. The control lock would randomly activate. I would have to reset the circuit breaker daily, leaving it off for around 10 minutes. Even with trying to go through all the steps to resolve the issue, resetting it from the circuit breaker, sequence on the control panel, the dishwasher wouldnt work. I called Maytag and after 40 minutes on hold, they finally answered. They wanted $89 for a service call and for the $143 part, plus labor. Might as well just replace it with another brand like GE, or Samsung.

I have had my fridge since 1984. It runs great and I have not had any problems with it. The freezer is on top and it keeps the food well frozen. I think the key to keeping food properly chilled and frozen is setting the temperature controls properly.

SOLVED: PDW9980L00SS GE Profile Dishwasher not cleaning dishes. The rubberized sump of this dishwasher suffers from chemical deterioration. In our case the deterioration allowed waste water to bypass a check valve and return into the wash water. Dishes dont come out clean and the spray wands get plugged up with bits of waste. The solution is to replace the sump. If youre handy with tools its an easy DIY job which requires pulling out the dishwasher and turning it on its side for access to the sump. Lots of videos online re the process and for safety start by shutting off the circuit breaker for the dishwasher power. For our model the new sump part number WG01L00289 replaces the original WD18X10026. Dishes & glasses now sparkle. Hope this helps as there was lots of frustration on this end before replacing the sump seen in the photo.

I bought the GE profile dishwasher and refrigeratior 5 years ago. The dishwasher in the first year the mother board went out then had a problem with the motor and now has gone out again and had a repair come out and cant figure out why it doesnt work. the refrigerator has gone out 5 times, the most recent is 8/1/11 and always the same problem. When ever the humidity is high the frig freezes up and then it stops running. Im very disappointed in GE, Ill never again by another GE appliance.

I bought a GE Profile dishwasher and have the same problems of residue on the dishes. My dishwasher is only 4 months old. I paid top dollar to get the same line as my refridgerator. This dishwasher should clean the dishes sparkling clean for what I paid for it. Disappointed in Cobden

We bought a GE dishwasher a little over 3 years ago. In the last week of September we awoke to the smell of hot or melted plastic. We found the source to be the dishwasher. I had loaded and started it before going to bed the night before. The counter-top above the dishwasher was stove top hot and upon opening the dishwasher found that a cutting board that we have had for many years and have always put in the dishwasher had melted on top of the heating coil. Dishwasher safe items on the top rack melted as well. It had been drying for at least 9 hours. After pulling the dishwasher out we saw the heat shield had melted and was crumbling. We contacted GE, sent them all the pictures and they told us it was not a safety issue. We have no doubt that if we had not woken up so early we would have had a fire in our house caused by the dishwasher.

I purchased my GE profile microwave in 2010 when my kitchen was being redone. I picked it for its style and the GE reputation. So far after 9 years, I hope this wont jinx me, it has been a wise choice. I use it daily.