I had a problem with my GE Profile Dishwasher that I had for several years and I had it on factory warranty. However, the last time they came to repair, they did not have parts available to fix anymore. So, they recommended new one. I worked with Consumer dept and made arrangements to replace with one they recommended at $500+. After several efforts to get it delivered, it was and we began using. It is not a Profile like my old one and it does not have the additional washing, rinsing and drying cycles as the Profile. It is a flat out bottom line washer. No, sani clean etc.. We have used the machine about 4 times and each time we have to rewash several of the dishes and especially the silverware. This is the most disgusting piece of equipment I have ever used. My home is loaded with GE products from years ago, mostly the Profile series and I have been delighted with the products and service. This machine is a disaster. I cannot believe that GE has this on the market or maybe this is a machine they use to satisfy customers who may threaten to use someone elses. It was not free, as I say it cost over $500. The stores and onlines advertise better machines on sale for less. I have GE stock which I will sell. They are going down on Quality. Consequences: Stuck with poor machine that does not do job that I paid good money for. Really, GE, get yourself together. Product Model:GDF510PSD1SS.

We bought this GE Dishwasher through JC Penney with a 3 yr extended warranty in Dec 2017 thank goodness. I am on my 3 round of having the mother board and the heater replaced since I got this machine. This last tech came as a 2nd opinion for my claim that this machine has not worked more than it works. All we would do is load the machine, go to turn it on and out it goes. The warranty people sent out a GE Tech who ordered a new board and fuser kit and came to put it in. Same issue, he said it was my hard wiring and I should have a electrician look at it. 200.00 later not the hard wiring. It is a pin hole in the heater coil that this last tech found. New heater now on order. My faith that this will fix the problem is waning. After this my warranty will be up and I will Never buy a GE appliance again. Not worth the money.

Our GE Microwave Oven/Convection Oven Combo (Model: PT970SRSS) is a little over 2 years old. The interior paint on the ceiling of the microwave oven is chipping and bare metal is exposed. In addition, the microwaves glass turntable frequently slips off its plastic tripod base. Circular scratch marks, which also expose the underlying metal are evident in the area which is located directly below the glass turntable. The circular scratches are a direct result of the glass turntable scraping against the paint. The GE repairman said chipped paint is not repairable and that paint should not ever chip in a microwave, let alone a relatively new microwave. After many calls back and forth to the GE Consumer Relations person, we were offered a new combo at a discounted rate of approximately $1,000. (We paid around $2,000 originally.) Im not satisfied with this offer. I strongly feel that consumers should NOT have to pay to replace a defective item. GE needs to pull these defective and dangerous products off the market! Take a lesson from GM!!!

We built our house and purchased a NEW close out Advantium Microwave. Due to delays we were not able to get into the house and use the appliance until literally 1 month after the WTY expired. The KEYPAD is shorted. There are a number of these complaints for this microwave - so we arranged for service. $375 dollars later - it was ALMOST working and the repair service determined that a new keyboard would be needed. 5 mos later we are kindly asked to take a refund of our repair bill and forget the whole thing - the part is not available! REALLY?! $2000 for a microwave, and you dont even support it?! Last - LAST time I put trust in GE. SCB2000FBB 03

I purchased a dishwasher and it doesnt dry the dishes. It leaves the dishwasher and the dishes wet. I was told they have a fix. However, nothing has been done. If you want wet dishes, dont buy. They told me to raise my water temperature on my hot water tank and to run my sink water until it goes hot. They told me to buy Rinse Aid. Well, I did it all and it still doesnt dry. This is an energy saver appliance. Ha, ha, its because they are saving energy at our expense.

I just wanted to make future purchasers aware of an issue I had with the oven light (GE over-the-range microwave model JVM1540DM5BB) underneath the microwave. It is much dimmer than my previous GE oven. I bought it from Lowes and after returning to the store to check a floor model, I discovered none of the models were plugged in so you cant check this out in the store. You only find out once the thing is installed. Lowes referred me to the manufacturer who then told me, after asking if my oven had 1 bulb or 2, the oven was working as designed. How they could definitively determine this over the phone was beyond me, but that was the extent of the assistance.

GE jvm1750sp1ss microwave - bought in 2010, less than 4 years old has stopped working. Lights are on, but when we hit the start button we hear a small pop and nothing else. The clock does work counting down but nothing else. I happen to love this microwave, it was a gift for my wife. It now no longer works and cannot afford a new one. Option 1: replace parts myself for 150.00. Option 2: call a technician for 200.00 plus parts or option 3: do without. Option 4: wait to afford a new one. I guess all things grow old but we should have enough history on these items to post a life span. Well a story like this usually falls on deaf ears but if someone is reading, make the suggestion on the life span or make the parts affordable. Thank you.

Beware of GEs scam! My new house came with a GE microwave oven model JVM1630. It no longer heats food so I called GE repair. Heres basically what they told me: It is likely the magnetron tube and it is still under warranty, so no charge to replace it but I would have to pay $99.95 for the repairman to come to my home to diagnose the problem. If I decided I didnt want to repair the microwave, I was offered a $100 coupon toward a new one but it had to be a GE and it had to be bought on their website only. If I decided to go ahead with the repairs, the $99.95 would be deducted from the bill and I would only have to pay for additional parts and labor. I repeatedly asked for a ball-park labor charge so I could make an informed decision as to whether it was cost effective to have the repairman come out or just get a brand new one elsewhere. The person on the repair line hung up on me! I called back and I was told the same thing; that no one could tell me what the labor cost estimate might be. I asked to talk to a supervisor and same story. I didnt schedule a repair because I was taking a long trip and wouldnt be using the microwave anyway. When I returned from my trip, I called GE repair and again they wouldnt give me a ball park figure. Frustrated, I decided to have the repairman just come out and repair the darn thing and an appointment was scheduled for the next Monday. I had to rearrange a Monday day trip to Wednesday and set the repair appointment. On Monday, it was starting to get late in the afternoon, so I called to find out if the guy was on his way. A recording said my call was noted and I would be receiving a follow-up call. About 10 minutes later, Kim in dispatch called to tell me she had to reschedule the repairman to Wednesday. I explained I already had an appointment on Wednesday. which was already changed because it conflicted with the repairman coming to my home. She told me the repairman couldnt come because his truck wasnt safe to drive so that whole day was shot. The appointment was rescheduled for Wednesday and I had to again reschedule my other trip. When the guy finally showed up on Wednesday, he told me to put a glass of water in the microwave and start it. Ten seconds later, he declared it to be the magnetron tube. He was at my house about 10 minutes, just long enough to take my $99.95 credit card payment and to give me an estimate of $246.90 to repair the microwave which included the free magnetron tube, a $20 part plus tax and labor. The estimate had instructions on how to get the $100 coupon if I decided to buy a new GE microwave, which he said is what most people do. He didnt seem like he came prepared to repair the microwave at all. I was so frustrated and already out the $99.95, so I told him to go ahead and repair it. He said I should call repair to schedule him to come back to repair it! I told him to just repair it now and he said he didnt think he had a magnetron tube in his truck. I asked him if he would go to the truck and check! He did, and nope, no tube and he left.I think this is a great scam GE and maybe others have going. Its entrapment. They get you to accept a repairman to come to your home and charge you nearly $100 for it, but give you a coupon for $100 for a new one but it has to be a GE and can only be bought from their website where they can go as high as $500 or $600. By the way, I got on the website to find a replacement. My model had been discontinued and the only one in my price range was also a discontinued model. They charge $75 to come out to install it and another $30 to take away your old one. I called local appliance stores to see if I could unload my old microwave for parts and they all said the same thing: stay away from GE products.

Bought a GE microwave and arranged to have it installed. Kept it in sealed box for 3 days until installer appointment. Opened box to find a crease (dent) in door. I phoned in to the GE warranty depot and they informed me that I only had 48 hours to report and as such was out of luck. They indicated that it is clearly stated in the Appliance Manual under the warranty section. Too bad that the Manual was in the sealed box. No warning on the outside of the box. On top of that the individual that I spoke to at the Warranty Depot was very rude. No more GE Appliances for me. Be forewarned.

Our GE microwave/convection oven model number JES1290SK01 is making grinding noises and has caught fire once on the side panel. We have owned this microwave for only 4 years. It was a terrible investment. No wonder Obummer had to bail them out. That is the quality the unions are currently producing. It’s sad really...

One of the most disgusting situations I have ever been in. I purchased a brand new home with all new GE appliances. I have since learned that a technician was sent out twice prior to our walk-through because the superintendent noticed the dishwasher wasnt working properly. I registered all my appliances online. The first time I used the dishwasher, it flooded the kitchen floor, causing the builder to have to repair baseboard and drywall. A technician came out and repaired it. I used it an additional two times and each time I did, it flooded my kitchen and a repairman came out. After the second time, I contacted GE customer care to open a case. The third time, I requested a new dishwasher and the customer care agent, Stephanie, stated that my new dishwasher was a discontinued model and so she suggested one that was a slight upgrade. I agreed to this change and she informed it would take approximately 24 hours to have it approved. I have since talked to seven different people at GE customer care. This was started when a company called Barlows Distributing showed up unannounced at my front door approximately hours after my discussion with GE. They said they were here to install my dishwasher. I was rather shocked, said the timing was impressive, and let them in the door. After they had drained the water standing in the then current dishwasher, they started to put in a replacement. I looked at the box and realized they were placing the same model in. I told them that was unacceptable, because according to GE, I was being approved for a different dishwasher. I then told the tech to stop installing it and called GE. GE had no idea where this dishwasher had come from. Then an unavailable number showed up on my cell phone and when I answered it, the woman spoke my first name and started talking about my dishwasher, stating the builder had ordered a new one. I asked her who she was twice and she would only tell me GE customer care and not her name. I have since learned her name was Julianna. She said that I had to take this dishwasher or I wouldnt have one at all. I took this as a threat. After spending countless hours on the phone with GE opening a case and discussing the issues, picking out an acceptable replacement, I was then told the builder made this decision. Not only was I thrown from person to person over a discontinued model, I was threatened, and further was told by the superintendent of construction that once the dishwasher was installed and we closed on the house, I had to handle all problems through GE. I own the dishwasher, not the builder. I registered the warranty, and I handled it through the proper channels. I feel I need an explicit apology from GE. One of their arms doesnt know what the other arm is doing. During this entire time, I had little use of my right hand and seven fractured vertebrae (for which I am permanently disabled) and had to physically wash 10 boxes of dishes that had been packed up due to our move and stand while doing it. GE has caused me property damage, stress, and severe physical pain, yet threatens me and yanks me from person to person.This is my house, my dishwasher, and this matter should have been handled directly with me, instead of inviting someone into my house that I had no connection to or knowledge of. The really sad thing is that I just purchased and had installed a $6500 water softener and reverse osmosis system for the whole house, manufactured by guess who...GE.

My GE Washing machine did everything it was supposed to do, especially in cleaning clothes and very few if any machine problems and they last years and years, mine was 15 years old. It kept surprising me because it ran so smoothly, truly cleaned my clothes and ran forever. The Dryer couldn't keep up with my old washer, had to buy a newer more expensive machine that couldn't dry at 8 years old. I loved my reliable GE washer.

Our GE microwave is 20 years old and still works great! Still looks pretty good too!! We do have a small crack and the start button is worn, however, we use it several times daily. Would definitely buy this brand again.

I purchased a GE microwave from PC Richard and Son in 2011. The microwave is mounted above the oven. On March 13, 2013, the microwave (model JVM1750DP1WW) sparked a fire inside while my daughter cooked a waffle. After I contacted GE via email, the case manager (Misty) sent a technician to my home to inspect the microwave. This was free of charge. The technician claimed the microwave was able to be repaired and he needed to order touch up paint and a few parts. I was shocked that the tech claimed this was a simple repair and able to be fixed. I said, You need touch up paint? This is going to look horrible. How safe can this be after having a fire inside? He claimed it will look good and I would not notice the paint. I spent $411.00 on this microwave less than 2 years ago. I dont think I should have it fixed and touched up with paint to cover burn marks. The microwave went on fire. I dont want it fixed. Its not safe and should be scraped for safety regulations, not repaired and touched up inside with paint. The tech ordered a few parts and I immediately called the case manager Misty to stress to her my numerous concerns on the actions of the technician. I made clear that I was not satisfied with my microwave being fixed and painted when it went on fire, but would like a replacement. I told her I could understand fixing it if it was a broken part or electronic device, but not a fire. She agreed that she also would not like to have a fixed microwave in her home, but that GE can sell me one at a lower price of $150.00. Really, do they need the money that bad that they cant stand behind a dissatisfied consumer when their product went on fire? This could have been so much worse. Lucky my daughter was in the next room. She smelled, heard the fire and stopped the microwave. I paid the $150 just so I can have a working, new, safer microwave in my kitchen. But this is crazy and not good business ethic on GEs behalf. This should be set as a recall, not a repair. I contacted the service manager again stressing my complaint and feelings about paying this fee for a new microwave. She said again that if the technician says the microwave can be fixed, then theyll listen to the technician and fix the item. Well this seems a little one sided since the technician works for GE. No brainier. What do you think he is going to say?

Does not hold as many dishes, pots and pan as my previous dishwasher. In the bottom rack I cannot place plates and bowls side by side. Rack is too small and the gray interior is too dark. And the top rack does not hold the glasses in place, already had one break.

We bought our first home a couple of years ago, and it came with brand new appliances. Never in my mind did I think I would need to buy a new microwave after 2 years. Our GE microwave stopped working after 2 years. I had microwaves in past that lasted for 10 years or more. Never again will I buy a GE appliances again. The quality sucks. Don’t waste your money.

My old (Panasonic) microwave lasted over 15 years. This brand is really poor quality and they dont stand behind it. Electrical burning smell. Less than 9 months old. Called customer service, they refused to repair and will send a goodwill rebate cert saying I can buy a new one (any model) and I will be refunded. I ended up paying $100 more because all local stores did not have anything close to my model. They will not cover shipping, tax or any of the extra cost of the new microwave. Stay away from all GE products.

I am so disgusted. My 1 year and 2 months old microwave could have burned down my house. It got very hot so much you couldnt even touch it! Microwave product code JES1344SK. This should be a recall and customers should not need to have to pay for these to have them fixed. GE should be grateful this didnt start the house on fire and no one was killed by it! I will never by GE again!

It works really well and this price point is good. It’s lasted me a few years and it is still in new condition. It has a nice modern look also. Good microwave for a great value.

Im just beginning the process of investigating this dishwasher I bought that doesnt work. I am a snowbird so this machine has only been used part time for a family of 2. We installed it March 2010 and it’s October 2013. But during that time frame weve only used it approx. 3 months in 2010, 7 months in 2011 and 7 in 2012 and 5 months in 2013. I noticed a smell of something burning before we left in May but thought it was something from the outdoors. So blew it off and left. When we returned last week, we discovered that the water wouldnt fill up but the heat would come on..... even if you turned off the heat feature!!!! And it gets hot. Weve unplugged it and was going to call GE repair tech until I read these reviews. Now I dont know what to do because its not under warranty.

GE appliances were installed in my new build home including a brand new, never used microwave. When we did our walkthroughs the microwave appeared to work (turned on, timer ran, etc.) but after signing we found out that the unit was a dud and the microwave emitter did not work so nothing was ever heated regardless of the run time. We have called GE several times only to get extremely rude and dismissive customer service reps (“Audrey” if that was even her real name). They refuse to replace a brand new unit that never worked and insist on trying to repair it, but we are also being told that this will take several trips as the technician will only first come to inspect it then a second trip will be needed to bring out the necessary parts (they don’t carry them in the truck because they are “fragile”). I’ll never be using a GE product again.

We purchased the following from GE: GE Profile refrigerator, dishwasher, microwave, oven and cooktop in 2006 (six years ago). Last six weeks, the refrigerator, dishwasher and cooktop broke! We have insurance through Assurant on the products since it was recommended. We purchased the insurance for repairs and parts. Refrigerator - the motherboard (if you have other words for this) went out (4 weeks for a part). Now it is fixed. Dishwasher PDW8280NSS - This was the final answer from GE Consumer Affairs:I do apologize for this entire experience. I will be more than happy to contact you today between the time frame of 02:30-04:45 PM CST. Any additional questions you may have, you can contact me quickest by email. Again, I do apologize and I will contact you later today to discuss further options available to you. At this time, being the part is not available, the best option would be to offer a prorate on this dishwasher for you in order to have a functioning dishwasher in your home. I do appreciate your patience in handling this matter and will most certainly speak with you this afternoon. Thank you. Really, I have a case manager? The products must be really ** good if you need this as a department. Everyone should rethink buying GE products. Never again. I am campaigning against them! I cant get the part on a six-year-old high-end dishwasher. We live in the US, dont we? This should be a class action suit!

GE dishwasher caught fire - not part of recall. I arrived home for lunch to find smoke alarm going off and kitchen hot and hazy. Determined it was dishwasher and opened to thick black smoke pouring out. Heat so extreme cups/dishes and racks and spinning thing on bottom had melted and adhered to elements, each other and bottom. Parts of the dishwasher itself are warped (steel!). Granite countertops too hot to touch and wood cabinetry surrounding it darkened. Dont know the extent of that damage yet. Thank GOD I came home for lunch- I normally do not. I truly believe our house would have been on fire.

I purchased all GE Profile & Café appliances when we remodeled our kitchen in 2012. The DW has never cleaned well. I have contacted GE through email several times and now I have to handwash all of the silverware and re-wash most of the dishes. At times, glasses and silverware come out worse than when they went in. We have checked the water temp, pipe size. We use recommended detergent and finish rinse. We had a service call from a reputable appliance repair person, we purchased the recommended citric acid and performed the recommended protocol. This thing stinks! GE recommended another service call. I had a 20+ year old KitchenAid prior to this and it worked like a champ! Never an issue. I am ready to toss it out and buy something else (but it wont match!). Any suggestions?!!

My less than a year old GE microwave stopped working last week. My AT&T phone service died so I had to make repair arrangements online. Guy was here this morning. My microwave’s main board is fried. It does not conform to Repair Guy’s published schematics. Repair Tech could not upload new data to it. Repair guy did order three new parts including a main board. GE told Repair Guy that mainboard delivery ETA UNKNOWN. After three hours here repair tech left and told me to call GE customer care. Believe it or not, two hours on telephone with GE. First you need to talk to a customer service rep that cannot help you. They then determine you need a Customer Advocate. Then they need to input data on your file for the Customer Advocate.Then they need to transfer you to that department. Then you have to get a case number assigned. Then you give someone all the serial numbers and model numbers again. Then the Customer Advocate (CA) takes the call. The CA does not speak English as you and I speak English. After the CA puts me on hold to verify the purchase, then the appointment, then the tech and then the order they actually speak to me. In my case, the mainboard part is not available on CA’s computer. The CA has to electronically contact the parts department to find out if the part is in this universe. If the part can be delivered to my Repair Guy in Jackson, GA within 14 BUSINESS days from the date of the inquiry I have to take the part and wait for repair.In the event the part cannot be delivered in 14 days CA will start a process to get me a new microwave. The parts department has up to 48 hours to respond to the CA. When asked what happens if no response occurs in 48 hours, I was told, That never happens. It is the Christmas Holiday and I anticipated guests. My husband is disabled and his meals are pre-made frozen so I will have to decompose them and heat them on the cooktop. GE could care less about those issues. So after waiting five days for repair I have no working microwave. Someone told me not to replace my GE with a GE, but I did not listen. It is December, holidays, no microwave is an aggravation that I thought paying for a GE product would alleviate. So, on January 2nd I might get an answer. Part possible or new appliance COULD be ordered and delivered by someone sometime.

Microwave Oven-Space Saver Model JVM6172DF1WW - This is the same problem that is well documented across the web regarding this POOR General Electric product. I purchased the microwave about 14 months ago and the keypad abruptly stopped working. After checking the electrical circuits from the main box to the device, I determined that the problem is not due to the electrical connection. GE appliance division has been in a poor state for a long time now. The company manufactures this product outside of the U.S., in this case Malaysia, and obviously has a poor quality assurance - quality control plan in place. Couple the production issues with poor customer service and you have a huge, well respected company that is putting out shoddy work.I will be trying to get someone to take responsibility for this problem within General Electric but recognize that any success in that respect is a long shot. My message to other consumers is succinct and to the point - DO NOT purchase this product with your hard earned dollars. Go with another brand with a company that stands behind its products and wants to keep the customer coming back for more. GENERAL ELECTRIC is not one of those companies.

The dishwasher is poor quality. Top is thin, top dish rack has trouble with tall glasses. Bottom rack doesnt slide in and out well. The power cord and water cords are too short. They are 2 ft shorter than our previous model dishwasher. Top was loose when delivered and had the wrong screw in one of the holes. The hose and cords are difficult to hook up because they are so short. We cant fit as many dishes in as our previous model of the same size and the unbiased reviewers are saying its washing quality is poor. We havent had it long and hate it. Home Depot wont take returns on portable dishwashers though. Out lots of money on this. This GE is thin plastic trash that costs lots of money with no return.

Our dishwasher has gotten very warm mid-cycle and now trips the breaker in the house each time we run the cycle. The problem became evident in April 2012. We have called in a GE repair person to fix it and they said it was a heating issue and not repairable. We have not used it since, but have not replaced it with a new one yet. In August, we read about the recall of a similar model number manufactured within same time frame. Our machine model is PDW7300J03WW, the recalled model is PDW7. Our machines serial # is **. Strangely, the serial number is not listed in the recall, even though symptoms are exactly the same!We have called GE Consumer Affairs at 1-800-386-1215 four times, the most recent today, 9/14/2012. Each time we call, we are left on hold for 59 minutes only to be disconnected automatically! I am sending a registered letter to GE CA with a copy of this link and intend to contact my local news if I do not receive sufficient response within the week. Does GE need to see an actual fire report from my fire department or worse in order to get their attention to replace the unit? It is disgraceful and extremely dangerous.

I had a blow up with my GE microwave which came with 2 metal racks. I used the rack once and the microwave flared up as if I had warmed something on aluminum foil. I removed the racks. The microwave is 2 years old. Last week I warmed a chocolate chip cookie on a paper plate for 10 seconds. Immediately the microwave flared up, the plastic bracket that the shelf rest on burned and melted. I was lucky no one was hurt or a fire resulted. GE came to inspect the microwave and offered to replace it for $258.80. I am arguing with GE. I want them to replace it free of charge. Their own technician tells customers to never use the metal shelves. I maintain that the design or brackets are faulty and GE should stand behind their products. This microwave was always used correctly. Do consumers have any rights at all?

I bought this Microwave JVM3160 on December 2016, after six month the handle door broke but it was replaced as part of the warranty. By January 2018 (no more Warranty) it began tripping the circuit breaker. I change the power source for a dedicate circuit only for the microwave 20 AMP. The microwave blew its own fuse. I replaced its fuse. Then it blew the 20 AMP circuit breaker. That was enough. This microwave went to the garbage after 1 year and 2 month of use.

Two years ago, I replaced my 25-year-old GE bottom-of-the-line dishwasher because it made a noise like a freight train. I was ecstatically happy to have a brand new top-of-the-line stainless steel GE Profile dishwasher that hardly made a sound while working. Well, that is the best part of the new machine because it also hardly cleans. We have tried different detergents, additives, etc. We have checked our water temp, pressure, etc. Not only does the machine not clean all the silverware/dishes, it doesnt dissolve and remove all of the liquid detergent, so I have to run the machine through another rinse cycle. We are so frustrated in my house that we have finally given up and now hand wash our dishes. I hate this dishwasher and would never buy another GE product again! I also had an issue with a GE bottom freezer fridge. But thats another story. By the way, the old 25-year-old machine? It always got my dishes clean.

Three years ago, we remodeled our kitchen and replaced all our appliances with GE Profile Stainless Steel appliances, stove, refrigerator, and dishwasher. Two months ago, the dishwasher, model PDWT580R10SS, stopped working. It was out of warranty, but the store where we purchased it said to call GE consumer service to see what they could do. They said that they would replace the parts for free if we paid for service. They said they would send a GE certified service tech to fix it. The two people they sent were dumb as a brick and after tearing apart the door, they decided that the controller board was bad and sent for a replacement. Two weeks later, they installed the new controller board and it still didnt work. They called GE and were walked through a troubleshooting guide and it was determined that the touchpad was bad. They ordered a touch pad and two weeks later, they arrived to install it and asked where the part was. According to them, it was sent to me and was at the post office, which it was not. They then asked to be paid for the three calls and I told them I do not pay for incompetence and would pay them when the appliance was fixed. Turns out, they gave GE the wrong address (their store) for the part and it was sent back. I called GE Consumer Service and talked to my rep who said she would send the part directly to me and that the service rep refused to work with me again and I should contact another service organization. The part came and it was not a touch pad, even though the packing list said touch pad. I called the GE rep, who is now a good friend and she said she would contact the store where we purchased the dishwasher and have them fix it as long as I paid for the parts. It is now two weeks since they arrived and diagnosed the problem. I just called the store and they said the part was backordered for another week. It will be close to three months before the dishwasher will be fixed if it can be. DO NOT, UNDER ANY CIRCUMSTANCES PURCHASE A GE APPLIANCE.

SOLVED: PDW9980L00SS GE Profile Dishwasher not cleaning dishes. The rubberized sump of this dishwasher suffers from chemical deterioration. In our case the deterioration allowed waste water to bypass a check valve and return into the wash water. Dishes dont come out clean and the spray wands get plugged up with bits of waste. The solution is to replace the sump. If youre handy with tools its an easy DIY job which requires pulling out the dishwasher and turning it on its side for access to the sump. Lots of videos online re the process and for safety start by shutting off the circuit breaker for the dishwasher power. For our model the new sump part number WG01L00289 replaces the original WD18X10026. Dishes & glasses now sparkle. Hope this helps as there was lots of frustration on this end before replacing the sump seen in the photo.

I recently had a service tech out to repair my dishwasher. Before I knew it, he was opening the unit and found a tube looking piece stuck in the unit. He was at my house for 15 minutes and the bill was over $250. He should have asked if I was okay with the procedure he was going to perform and the cost before proceeding. To make matters worse, the dishwasher is not cleaning dishes now. I sent a prior email to GE a couple of weeks ago with no response. I would have never spent this money if I had been given the option and certainly now I have been charged for a repair that actually made my unit worse than before since it is not cleaning the dishes like it did before the repair. I respectfully requested that my money be refunded and/or be given a credit towards the purchase of a GE appliance and have received no response. I tried calling and have been on hold for over 30 minutes now with no one picking up, despite the fact that hold time stated estimated wait time was 5 minutes.

Purchased an entire kitchen suite of GE appliances. Almost instantly the fridge started making loud noises which the repairman told me was normal. LOUD AND OBNOXIOUS. I wear earplugs in my house to avoid the noise! Secondly, the dishwasher started leaking and the warranty company is refusing to honor the warranty so Ive been hand washing dishes since August! They also refuse to refund the extended warranty fee. Currently filing a protest with consumer fraud. STAY AWAY FROM GE, isnt that a shame! THEIR PRODUCTS ARE JUNK!

We bought our home 4 years ago. After 2 years and 8 months the bottom of the door cracked and a piece fell off, then the door wouldnt close. We were past the warranty so we bought a new one since it would be cheaper to replace it than repair it. We didnt complain because we thought it was put in incorrectly by the builder. The new one was installed correctly this time. After 1 year and 8 months the door is doing the same thing. I contacted GE and they said there is no manufacture defects. Because we didnt purchase the extra warranty it would cost us $90 to have someone come out and look at it. We only paid $179 for the microwave. It is a huge problem for us! We will not buy another GE product. Mostly because the customer service isnt willing to help at all. They just transfer you to different departments who all tell you the same thing. Very disappointed in GE.

My microwave is a GE, model JE 1040 made in 1998, which they probably dont make anymore. I use it several times a week, mostly to heat up leftovers and water. Also pre-packaged microwavable meals, such as breakfasts and biscuits. I have cooked different kinds of meat and other items in it many times and am completely satisfied with it. I would be lost without it.

Had it over 12 yrs. Never a problem. It’s a wall mount microwave. Easy to clean stainless steel. A bit of a pain to clean the stainless steel inside of microwave. Would recommend the microwave to people looking for one.

I never imagined that a microwave in my new home would be rendered useless after 2.5 years. Like many of you, my control panel stopped working and the floor of the oven was extremely hot to touch. Heres the weird part. You can hit the number for timed cook, but youd have to let it heat the entire time. If you open the door, you cannot restart it. You have to unplug it to reset. Of course, I called GE customer service, who gave me the same spiel about $80 service call, plus repair and parts. Thanks to your candid remarks, I will not be purchasing another GE appliance.

My husband and I bought a GE dishwasher from Nebraska Furniture Mart in April 2011. We installed it in our new home in May 2011. It has never cleaned our dishes properly. Our dishes come out of the dishwasher with a film on them and do not look clean at all. I called GE in July. They sent out a repair person who proceeded to tell me that we were not cleaning our dishes well enough. The person also told me that our water wasnt hot enough, we didnt clean our dishwasher out often enough, etc. After I corrected everything, the repairman suggested our dishwasher still wasnt working properly. So, we called GE back. We have since had two additional repair men out. Neither one has been able to repair the dishwasher. The last repairman replaced a valve he thought might be broken. However, it is still working the same. I am absolutely disgusted with the experience I have had with GE.

After a year and 1 day of use the microwave blew out and got in fire. Fortunately I was nearby and was able to extinguish the fire. I called the customer service that told me the warranty was over and all they can do is give me a discount on the purchase of another unit, and that I was on my own for the collateral damages due to the fire!

GE Model WES1130DM2BB MFG APRIL 2011, bought Oct 2011 @ SAMs Club. Microwave continues to run after cook time and will not stop until unplugged! Service Dept offers a $25 discount on a new GE Microwave after cutting cord & sending info plate in. I am concerned this microwave will cause a fire! Luckily I was near and unplugged it!

I purchased a new GE washing machine, and a new GE dishwasher, less than 5 years ago. The washing machine started leaking suddenly, and the repairman stated it was due to a cracked basket. They stated this was very rare, but the warranty had expired. The repairs would cost as much as a new machine. The dishwasher stopped draining water. A repairman advised there were two pumps, and one or both may be out. Estimates to repair the unit were only slightly less than the cost of a new unit.I will never again purchase GE appliances. I believe the life of a home appliance should be longer than 5 years. The cheap units I bought in my younger years lasted 20 years, without any problems. The GE units are not quality machines, and repair costs are outrageous. Nice way to try and convince appliance owners to just go buy new units. I can guarantee, I will not buy GE products ever again.

GE GDF520PGDWW 24 white, full console dishwasher - Energy Star. I have had this dishwasher model since December 2014 and it has not drained consistently since the beginning either during the wash cycle or rinse cycle. GE has sent three different repair companies to replace the pump, the control panel, and ultimately the entire dishwasher, yet even the new dishwasher still does not drain consistently. Sometimes it drains and sometimes it doesnt. The GE-certified repairman was again here this morning and is again ordering a new pump. Counting the original pump, the previously replaced pump and the pump in the new unit, this would be the fourth pump. I tried to suggest the problem may not be the pump, but the repairman could not think of another possible issue. I do not recommend purchasing this dishwasher.

Touch pad on GE CAFE over the range microwave started failing within first 2-3 years. Now, 6 years later, it has completed failed. Repair part alone (not including service call) is almost $550.00. Pure junk...made in MALAYSIA!

Our General Electric Dishwasher does a very good job of cleaning and drying our dishes. It does these jobs very quickly and quietly. We have had it for about 5 years without any problems or repairs. I would recommend our dishwasher the General Electric Profile for home use. Several of our friends and neighbors recommended this dishwasher when we bought it.

A recall on a dishwasher: The heating element was replaced due to the fact they said it could catch fire. The bottom of the dishwasher is plastic. They replaced the heating element with the same kind of element that was there. How could that be any safer if the bottom is still plastic? I have children in the house; I feel this is a dangerous situation. I am dissatisfied with GE. This is the third dishwasher with the same problem in a matter of 5 years.

I would not buy G.E. ever again! I remodeled our kitchen and have had more trouble with all the Appliances! They were all G.E. Frig, Microwave, Dishwasher and Stove and cooktop! Had to be serviced, all of them the first month!

After 22 months of use, the microwave stopped heating. Youll see the same problem all over the internet. Lights turn on, plate spins but no change at all in temperature. The repair call was estimated to cost more than the price of the microwave. Its almost like it was planned. Never buying a GE product again.

GE had a recall but only gives you 50.00$ to replace it or fix it. We could not afford a new dishwasher. I talked to GE and they were no help at all. So we still use this machine but we do not run it unless we are home. This was the machine that would catch fire.

I bought a JVM3670SK05 a little under two years ago. It is an above the cooktop vent-a-hood microwave. I believed I was buying a quality unit. Now everything is working, but there’s no heat! Even the cheap units from Walmart work longer than this expensive piece of crap! Now I either have to spend enough to buy a new hood for cooktop and new microwave or pay the same price and buy parts in hope that they will not go out again. Not really feeling lucky with the GE product.

Its an older Hotpoint, and the layout is fairly roomy for a dishwasher of its size. The last apartment I was in had a comparably sized dishwasher that had too many shelving elements that got in the way of being able to just shove some dishes in there. Ive discovered with this dishwasher I need to stick to powdered detergent because the Hotpoint doesnt fully dissolve tablets. It does a fine job overall, though.

Bought a GE dishwasher that a service bulletin was generated by GE on a fault in their manufacturing. DD03-16 for reference. The door does not stay shut and continues to open. GE customer service suggested replacing hinges and brackets on the door. So I ordered the parts and changed them. It did not work. I called them back and they suggested purchasing and replacing additional parts. I called a local 3rd party and they provided the service bulletin and said that this is a problem in the design of these models. GE will not repair the problem. The cost has been shifted to me or they suggest buying a new dishwasher for only $150 over retail. They are hiding behind a warranty that expired, but the problem started at time zero when it was made. This is garbage and I have been without a working unit and continuing to argue with them over the repair or replacement cost. Call if you have this problem because they have identified it and have a solution that they will not tell you about.

I have a over the stove microwave. I went to pull out the filter to clean, and one came out no problem. The second one fell apart. I got online today to replace $38 plus $6 S&H for one!!! It was the first time I took it out. I called GE told them I thought it was B.S. They said, No problem, we will give you 15% off and free shipping. Only problem was they wanted $47. I have 3 GE appliances. When its time to replace I will NOT be buying GE.

I work as a service tech for a major insurance company. I am a master tech, and master electrician. The company that I work for owns an apartment complex which is used to house company executives whose offices are located at other sites, but often come to the Chattanooga Site to work short term. I was called to repair an old dishwasher in one of the apartments. Upon looking at the existing dishwasher, I decided to replace with a new one. I received a new GE model GDF 510 PGD 1WW dishwasher on November 8, 2013. As usual I unpackaged the appliance and examined the exterior. Finding no visible damage, and with the help of a master plumber, I removed the old dishwasher, and installed the new one. After all the connections were made, I opened the door, removed all the packaging from the dishwasher, and found the upper spray arm lying in disarray in the bottom of the machine. Assuming that this was the way that the machine was packaged, I installed the spray arm, plugged the machine up and started the machine as the operations manual instructed. The machine would not work. The power lamp would burn solid for a few seconds and start flashing. I tried to start the machine a number of times while reading the instructions, and while my partner read the instructions aloud, but with no results. Finally, I used a screwdriver to hold the door switch closed, pressed the start button and the unit started. The catch mounted on the door would not make the door switch, mounted on the machine body. We tried to adjust the switch and the catch, but with no success.The dishwasher did not show any signs of exterior shipping damage, but for some reason the upper spray arm was off and lying in the bottom of the unit, I found a small piece of broken plastic and a screw in the bottom of the machine, and the door switch would not make. Outside that I have no complaints. I am not sure where this machine was assembled, but it certainly was not equal to the machine that we removed. Thanks GE for making my job harder. I will have to find another dishwasher Monday and replace the damaged one, and perhaps send this one back, but the replacement will certainly be another brand.

Model JVM1740DP1BB - GE Microwave - complaining since November 2014. Great microwave UNTIL the inside ceiling bubbled and began to flake off in various locations. A service tech that visited our home advised us to call GE and advise them of a potentially hazardous situation. The GE rep offered to sell us a new microwave but only stated that we were out of warranty, although this is clearly a manufacturers defect! She proceeded to tell us the lining was perfectly safe but maybe we shouldnt operate it. I have written GE management to see if they will assist in replacing the defective unit; GE is the reason we purchased it to begin with (but it may be the reason never to purchase one again).

RCA RMW953-White 0.9 cu. feet Microwave, 900-watts, 10-power levels, end cooking signal, glass turntable, 6-one-touch cooking menus, speed and weight defrost, cook by weight. Bubbles obscure text. I wanted a white microwave with a door handle, .9 and fairly powerful. I was glad to have found this microwave. But I dont know if the hole was there before, or my teenagers or I inadvertently put a small hole in the plastic covering over the control panel outside the microwave (NOT meant to be removed, I asked support) but now its become a larger hole as air got underneath. I cannot read the button text. I tried to cover it with scotch tape and thats not working.I searched and found out this is a common problem with GE microwaves. The buttons are very close to the bottom and therefore, countertop, so if you have a utensil or plate or something that sits near the microwave, it might nick the plastic coating. I called GE support (in India) and they said since its under warranty, I can return it. However Id have to pay shipping costs. Fortunately, I bought this at Wal-Mart (I hate to support this store but it was the only place I could find this style) and they have an excellent return policy and there is no charge for shipping. It was easy to call and request a shipping label within the generous warranty period. You might save yourself the trouble of a return or be very careful to not put a small hole in the plastic coating. Again, this is not protective coating for shipping, this is a permanent coating to protect the buttons.

My GE dishwasher model #GDF570ddF855 is the worst dishwasher Ive ever owned. I have had 4. Ive had this model for 6 months. This model is hard to turn or to figure out if it is turned on. Right now its locked up and Im following the direction to unlock but it wont unlock. So theres no real on/off button! There needs to be a control on the inside of door where you can turn the lock button. Im writing this so others wont buy this model as they will be thoroughly dissatisfied. Maybe all GE dishwashers are like this? This one sucks...

I have had my fridge since 1984. It runs great and I have not had any problems with it. The freezer is on top and it keeps the food well frozen. I think the key to keeping food properly chilled and frozen is setting the temperature controls properly.

I purchased a GE Cafe Over-the-Range Microwave along with a GE Range. It was delivered on Nov 2009. The control panel started acting up and quit working altogether in May 2011. I called GE and found that the replacement part and repair was almost as much as I paid for the microwave. After talking to several people and making my case, I was told they would give me a discount on replacing my unit. I was to look at microwaves and let them know which one I wanted. I have left several messages and no one at GE will return a call.

My dishes always come out clean & the glassware always sparkles. I can use normal, heavy or light cycles. I can use heat to dry the dishes or turn that feature off & let them dry themselves. I think its just a normal size. Its white & matches my other appliances. This is the first GE Brand that Ive ever had. Ive had KitchenAid & Frigidaire models in the past and this one is as good as the others were.

GE Model PDW9280J10SS Fire - Many GE Profile dishwashers have been recalled during the same time frame as the model we purchased, but it is not listed as one of the recall models. Just as many other complaints, ours started to smoke out of the top of the front door and filled our house with smoke. Thank God we were there to shut it off. The next day I opened up the front door to see what had been burning and it had holes burnt in front and back of the main circuit box (for lack of better name), one burn mark right where the main wire harness plugs in and burnt right through it. This is the same description many others have written. There is a problem with all of these Profile dishwashers purchased between 2006 and 2009 (ours 2007). If we had not been home, who knows what would have happened?

I bought the dishwasher July 2020. I’ve had 9 service calls and multiple calls to GE and my dishwasher still doesn’t work correctly. It doesn’t wash or dry thoroughly. At one point it wouldn’t even turn on. They came and the wires melted together. It was installed by a professional. Now I’m worried it a fire hazard. I’ve had to leave work early each time. At times they have not shown up when they were supposed to or shown up when they are not supposed to. Every time you call you are on hold for at an hour. When you do get through they pass you on to someone else who doesn’t care or know what to do. Ive been told several times that should I get a new dishwasher after this many calls but I’m told by the service person that is not true. Also if the repair person deems it unrepairable can be replaced. The repair person said that’s not true. Now the its out of warranty and they are trying to charge me for the service call. They offered to sell me a new dishwasher at a discounted price. Unbelievable! I’m at my wits end and I’ve lost faith in GE

I have a GE Profile model JT965SK4SS micro/oven combo. It came new with my new home. A couple years into it, the paint (lining) interior of the microwave start to bubble and peel and eventually started rusting. Had SEARS come out (warranty had expired) who contacted GE and they concluded it was only cosmetic that it doesnt affect the functioning of the microwave. Well, its gotten a LOT WORSE now, bubbled peeling paint all over inside, rust, exposed metal, and the paint is falling onto food. I can NOT even wipe out the interior to clean it, it makes more stuff come off/fall down. I called GE last week, was told by 2 employees that it is NOT safe to use anymore, discontinue use. I had SEARS come again (per GE). The tech said he had NEVER seen anything like it before. He called GE to tell them its not safe, exposed metal, and its dangerous. They again said, well maam, youve gotten 8 years use of it. We wont replace it, but will offer you a discount for a new one ($2,500 out of pocket for me). The person who had offered me the discount (yes, I sent pictures, showed how bad it is) also gave me a tip regarding the unit I have now with the exposed metal and the chance of arcing (spelled? like Ark) if the unit catches on fire, make sure not to open the doors, the fire should contain itself. 2 employees told me its not safe, a 3rd gave me helpful info for if/when it catches on fire... and yet, they still wont replace the unit... and do not stand behind their own products. I plan to go to our local news station, see if they can get anywhere with this, since they wont do anything. Patiently waiting and unable to afford a new unit.

The defect is in the Gas Control and Thermal Coupling, per my licensed plumber. GE tells me my water heater is still under warranty; therefore, I would like an authorization code to have it replaced by Home Depot where it was originally purchased. Home Depot tells me I need GE to give me the authorization code. BTW, your CS rep was very helpful. She is sending both items to me, but I prefer to have a replacement for the cost my plumber will charge to install parts in a questionable product. Thank you.

I am a licensed master plumber. I do a fair share of high end kitchen installs, I noticed that in the last 5 years that all GE dishwashers I installed had a whole lot of extra parts to be installed by the installer. For example. Today I uncrated and tried to roll a GE dishwasher I got 6 and a drip tray fell out. Then when I went to install the dishwasher in the cabinet I had to install 4 different rubber flanges. When I went to push the dishwasher in the flanges came loose and hindered the install. The the insulation jacket kept binding up. The last 10 of these GE dishwashers I have installed the dishwasher appears to be racked or not square. I had to tell the General Contractor that I dont want to install the GE dishwashers any more. Way too much trouble. I have much better luck and ease of installation with Miele and Bosch. The GE dishwasher are very frustrated to install. Bob Licensed Master Plumber since 1982Richmond VA

Soon after getting our new Cafe Microwave CVM2072SM3SS the control panel died. I called GE and power cycling got it going again. This is an over the stove microwave, so we were also told by GE not to use the right front burner without the fan on boost. The problem persisted from time to time and steadily got worse over our 5 years of ownership. Reading the internet this was a common problem known to GE but they took no action to contact owners. The panel is now dead and my only option, having tried the fixes on Youtube, is to invest money starting at $108 for an inspection or buy a new Microwave. My entire experience with this product has been a big disappointment as I also own a GE Cafe range, fridge, and dishwasher.

Figure it out GE! The sixth motor and mode selector for our washer has been reluctantly ordered by a tech this morning. The second motor was installed months after buying the brand new machine. Now, only two months since the fifth motor and mode selector was installed (Dec 2, 2011), the wiring harness is burnt up. The tech recommends replacement of the washer by GE, but only gets push-back from GE. This newest incident included a horrific smell of smoke. I do not trust this machine. I have a wife and child to protect. Think about it - do the math - add your costs for repeated repairs. You do not get to be a company the size of GE by not understanding simple economics. Open your eyes and replace our washer.

I love GE's washing machines front loader and it's excellent. I've never had to have them come out and four years to fix anything on it. Cleans very well and washes the clothes outstanding and it cleans up very easily when you clean it through the cycle that comes with the machine. It's relatively easy to understand as far as the button setup on there. I also liked that you get the echo warm in the Echo cold features along with the regular warm and cold. I did purchase the block that the time that I got it which helped out a lot is I'm 5 foot 10 and it's the perfect height. It helps getting stains out really easy as I have a nice here to play softball. I would definitely recommend this washer to anybody and everybody. I even wash my huge comforter for my bed in it and it washes it great every time.

Paint is peeling on the top part of the oven. It could fall into food. This seems to be a common problem. Called GE. They said it could not be repaired and to stop using it. Buy a new one. What kind of product do they put out that cannot be repaired? Not very good in my estimation. Customer Service did not offer much assistance to replace it. Be warned. Don’t buy GE products.

GE over the range microwave Model hvm1750DM1 WW - It’s just about 2 years old. It started making a grinding noise, then quit. No more GE for me.

The one thing I would change on this model is a top rack sprayer. The rack sizes are nice. The bottom rack holds pots and pans well, but top rack dishes need a good pre rinse before washing.

The microwave is large enough for a whole chicken and operates at both a high speed and good efficiency. Most items can be timed within minutes of properly prepared meals.

GE Stainless Steel Profile Dishwasher - My dishwasher is about 5 years old. Two years ago, we noticed that the gaskets, both around the tub and on the bottom of the door, were becoming gummy and rippling. We were hoping to make it another couple of years before buying a new dishwasher, but a couple of week ago, the top arm fell off because the gasket was so degraded. We ordered the appropriate parts and were only able to replace the top-arm gasket and the tub gasket. We had to call an authorized GE repairman, specifically RC Appliance in Sparks, NV. When he tried to get the gasket out, his hands turned black from the rubber. After about an hour of trying to get the new gasket installed, he had to use his pliers to crimp the gasket in place leaving large dents along the bottom edge of the door. He said the factory had crimped the old gasket in place at the factory from the other side. I am extremely unhappy about the workmanship and the fact that the gaskets did not last a reasonable time. I dont want to seek an attorney, but would rather GE contact me to discuss what must be done.

We have a 2017 GE profile built on microwave. The microwave started shooting fire inside the microwave a year ago. GE fixed it. Last week the microwave started shootings fire inside the microwave again. This time it was much worse. The GE technician told me it was not fixable. I called GE customer relations and was told too bad because it’s not under warranty anymore. They offered a minimal discount on a new similar model. The attitudes of the customer care representative and supervisor took me by surprise. They were curt and told me, Guess you should have gotten the extended warranty. When it comes time to replace my kitchen there will not be any GE products in it. GE does not stand behind their products. The tech told me there are issues with the profile microwave and he felt they would replace it. They did not replace it and were rude. I have been a loyal GE customer. Not anymore.

Update 4/14. GE finally conceded that the dishwasher is indeed broken last week, and set up a replacement unit to be delivered and installed. The company that delivered the new unit would not install it of course...why would they? So, we had to hire another place to install it. GE is supposed to reimburse us for the extra installation expense. Im glad it is finally resolved, but man, oh man...what a headache.

I have had the GE Profile for approximately 8 years with no Issues. I learn something new it will do every now and then I had no idea was possible. I stillHave not conquered the convection baking and that is my fault. I need to use it more often since it wouldn’t heat up kitchen like the range does especially these hot summer days in Texas.

I have just purchased a new GE dishwasher because mine just broke after 35 long years of excellent service. I am so completely satisfied with your GE products, and I would like to tell you also that the double oven stoves are still working well.

I've always enjoyed GE products for a number of reasons. They are dependable and with care will last many, many years. My refrigerator lasted just over 20 years! My microwave is easy to clean and has never let me down over the years I've had it. GE products just last longer than other brands.

I purchased a GE over-the-range microwave, GE Profile **, on 2/22/2005 as part of a kitchen renovation. I also purchased the GE Profile dual-fuel range, **, and the Profile ** refrigerator at the same time.I am now having to replace the over-the-range microwave as the interior enamel is chipping off in chunks rather than the discreet amounts in the beginning. The dual fuel range burst into flames and was replaced 3 years ago (the line was eventually recalled). The tracks that support the drawers in the refrigerator are breaking off slowly but surely, meaning they will not be useable shortly. I would not take a GE appliance as a gift.

This washer was easy to install myself, and has worked perfectly. Stainless steel insides. Very happy. You put a pod in, turn it on, cleans great. We do not even have to use heating element. Dishes dry quickly on their own. 24-inch wide. Bought to fit the new kitchen cabinets. Nice brushed stainless outside. Cleans easy with towel and hot water. Silverware container picks up to take to storage areas. No problems at all.

Don’t know the exact model type but it’s a built-in unit as opposed to a counter top type unit. It’s installed on top of a GE oven. Have had no issues whatsoever since purchasing the house in 2008. Barely no maintenance required aside from the normal cleaning of the inside of it and even that is pretty easy.

Purchased a black stainless steel microwave model JVM7195BLTS. When we opened the box we realized the handle finish was stainless steel and not black stainless steel as the rest of the unit. The website picture clearly shows a matching black stainless steel finish on the handle. Store was unaware of any problems and reordered another one. They claimed the GE rep said they had a problem with the handles on these units but didnt tell the retailers.

GE profile microwave convection - over the gas range. Oven temperature does not heat up more than the 370 degree, even if its set to maximum (450 degree). I purchased 4 ovens in the past year, all have the same defect.

A small black piece of plastic, which snapped into the back of the microwave handle has bent/shrunk, and popped off. My microwave is just a little over one year old. I called the GE 1-800 phone number for parts, and GE does not offer a replacement part for this, without buying a whole new replacement handle, which costs over $160.00.

Fourteen months after buying my new built-in GE Profile Microwave/Convection, it stopped heating. I was told by GE that it was not under warranty. I paid close to $300 to an appliance service operation locally to fix my nearly $1,000.00 GE built-in (depending on the microwave to help feed four kids under the age of nine). So, about 13 months later I had another heating issue and I called the appliance service operation and they found another problem with the microwave. They said it was a faulty piece of equipment, replaced it and didnt charge me since they were local and said this shouldnt have happened (knew I was recently divorced and took pity on me). Almost 18 months after this, so three years after the purchase, the microwave started to act up again - it continues to work even after you open the microwave. Just dealt with it since it still worked. However, 6 months later, the microwave now doesnt heat. The power is on, and nothing happens inside. This started a week ago, but it was off and on. Now its dead. Never buying a GE anything. Ive got to buy a microwave and a refrigerator in the next six months. It is NOT going to be a GE!

28 Inch Front Load Washer with 4.9 cu. ft. Capacity, 13 Wash Cycles, 1250 RPM, Steam Cycle, Steam Assist, Time Saver Option, Sanitize Cycle, Energy Star in White. Overall this machine is top of the line. Purchasing a home appliance is like purchasing a vehicle. I took my time and reviewed and compared before purchasing. About 3 months. I had just purchased a home and so you want an appliance that is going to last. It has a 10 year warranty. It has 3 color options. It's cosmetically attractive. It also is elevated which is a smart choice for a basement machine in case you have issues with water in your basement.

Bought brand new GE Profile DW PDT845SSJSS as part of four appliance package to be installed as part of kitchen renovation. Bought in April 2018, renovation delayed until August 2018, install of appliances October 2018, installer by contractor plumber- excellent seasoned experienced installer. Never used DW until moving things into new kitchen. Washed dishes off in DW before placing in cabinets. After 3rd cycle- DW stopped working stating leak detected - contact GE. Are you kidding me? Brand new appliance! We had original installer come out- no leak- no visible water- we went to placed we purchased DW from - local place - Ray’s Appliances- asked for replacement DW. Was told we would have to pay for installation of 2nd DW at 225 charge. Are you kidding me? GE guy came out and did something to DW to fix it but said problem could return... Serious??? Well -DW worked for a few cycles- now displays leak detected again! Called GE and coming out 12/2. Ridiculous- I want a NEW DW with free installation! I’m paying @971 bucks for something that didn’t work from the outset!!!

Purchase date 4/20/15; Model # GDT 580 SMF ES; Serial # VD776355; Dishwasher wasnt installed until the end of June upon completion of a complete kitchen renovation. Eight months later, on March 1, 2016, the dishwasher was leaking water all over the kitchen! I initiated a service call and the repair man replaced the seal and it has worked without leaking until April 13, 2016. AGAIN a very large amount of water poured out of the left side of the door. The repair man had to return 3 more times and finally didnt have a leak for almost another year. Now, June 1, 2017 my kitchen is once again flooded. This machine is garbage - Very expensive garbage. Dont waste your money! I had previously purchased from Sears and never had a water leak in a machine that was 20 years old.

We have had our GE dishwasher model GDT580SMF5ES for only 1 year and a half. As I was closing the door the hooks that attached the outer shell/panel to the door broke. Unfortunately we didnt purchase extended warranty so this will not be covered. We have had two technicians from our home insurance coming in but we are not sure yet if the policy will cover the repair. I just cannot believe this is happening as we have barely used this dishwasher as it is only my husband and myself. All I can say is dont buy GE.

Had microwave since I moved in in 2007 and it has been great. Looks just like new and works the same. A very great product that Id buy again. Has enough features and options for most people. Includes beverage, coffee and other buttons.

My GE DVM5140DN1BB Serial # ZS 902371B manufactured in December 2009 has stopped functioning. It looks and sounds like it is working but it will not heat. GE only guarantees their warranty for 1 year after the date of purchase. This should have been my first clue. For a fee, they will come look at it.Growing up we had an Amana Radar Range. My mom bought it in 1987. I replaced it so that I could save counter space and also that it would match my other kitchen appliances. I bought the GE microwave in May 2010. This product lasted for a total of 16 months. Ridiculous! In my opinion, big business companies no longer have to be held accountable for producing bad products. Money was lost but will never again be spent on a GE product.

GE is a very reliable name brand with history to back it up. I’ve used their washing machines for years and only changed out once due to newer features. I had Thebes first washer for at least 10 years, maybe a little more. It only needed one part replaced, that was the capacitor, otherwise it was still usable. I am not an in depth handy person but I will read and do my research and found directions doable. Additionally, I found the service help desk very informative and that’s how I discovered it was the capacitor that had gone bad after washing clothes for so many years, and believe me, I did a lot of cycles with my kids and family. I feel I got more than my money's worth. Lastly, I’m still using their products to this day. I may not have the frequency because we are empty nesters but I still believe in their products,

After my previous GE Microwave had paint peeling, I was offered a new one at a discounted price. The new one will not make popcorn. It does heat water, but a small bag of popcorn takes 4-1/2 minutes for 1/2 bag. I called and they sent a repairman. He made a bag of popcorn, told us to use a different setting. Tried that and it still didnt work. Then he heated a half cup of water and declared it works fine. It does heat. It just wont make popcorn. He said they changed the design due to people starting fires making microwave popcorn, but that could just be a easy lie. Said There is nothing we can do about it. Just dont make popcorn, eat chips instead. What???

I purchased this dishwasher 2 months ago and am VERY disappointed with its performance. For an appliance that claims energy efficiency it is a total failure. My last dishwasher was a Kenmore that I had for 15 years. It outperformed this thing in every aspect. Since purchasing this dishwasher my water bill has gone up and my energy consumption has gone up. Why? Because I cannot put plates close together in this energy hog or they will not get clean. I have to do twice as many washings as I used to for the same results. This piece of junk has NO WASH PRESSURE! All the dishes must be pre-washed in the sink to assure satisfactory results AND I must use the hot water boost or they will not get clean. Energy wasted doing a pre-clean and energy wasted with hot water boost - bad combination! This product is taking me backwards in savings and environmental damage.

We have a GE PROFILE dishwasher that has served us well for several years. Tonight, however, while it was doing the dishes the main circuit board caught fire. After turning the power off and trying to blow out the flame, we opened the door cover to find the main circuit board still smoldering. One of the relays on the circuit board had caught fire and started to burn through the circuit board melting it, the plastic cover and the wire harnesses. We were lucky to be home and awake when this happened and were able to take care of it. If we had been gone or asleep we probably would have lost our home!

GE is the only manufacturer who still makes an under cabinet size microwave and therefore I use this product. I renovated my kitchen 14 years ago and on my second microwave. It is small, but does do its job, but when I work with a larger microwave I realize how different it is due to its size and less powerful.

I purchased a jes1451dn1bb microwave 16 months ago and I just noticed the enamel coating on the top of the unit is chipping. GE has been unhelpful, saying it is outside the warranty and I need to mail the cord and sticker inside it to have a rebate issued. Since I use my microwave daily, I cannot wait until it is processed to buy a new unit. Not only did the product endanger us with exposing our food to paint emissions, the company has been unhelpful. I highly recommend buying another companys product and do your research!

Model gdt580sgfbb - About 2 weeks after the warranty expired, the dishwasher stopped filling with water. So, our friend replaced the water inlet valve. No change. If you pour water into it, it kinda pushed it around, but empties it out, wont refill, and starts whining. Then, if you open it, and turn it off, and re -shut it, it starts itself back up again! What?! This stupid thing is essentially brand New! To be truthful, it has never cleaned very well, leaving residue on dishes, and NEVER getting dishes dry. I regret buying this item! And its still not fixed. I will not buy another GE appliance.

I purchased a GE Profile dishwasher in June 2015. It was delivered dented.19 July it was replaced. The dishwasher worked for 3 months. Then it stopped working and the display panel had a LEAK DETECTED, DO NOT USE, notification. We contacted GE who could not find a GE repair technician to come and repair it in the entire BAY AREA. The dishwasher was bought at SEARS who refuses to take any responsibility.