This is a work horse of a machine. I have been using it for 12+ years. Not my first choice, but it was here when I moved in. Still going strong. So why change now, when its doing its job. My first dishwasher choice would have been a Bosch, because they are so quiet.

Purchase a GE microwave Jes1142sp2ss on December 2014 from BrandsMart. The paint on the bottom of the microwave is peeling off exposing the metal. I have never ever heard of this happening on a microwave. I will never buy another GE product.

Our GE Spacemaker XL microwave stopped working on 7/11/12. We purchased our house in January 2000 with the microwave included and have not had any problems with our microwave, until yesterday, when we woke up and tried to pop the kids breakfast in for a quick heat and it made a strange humming noise and you could smell plastic melting. All power was quickly turned off to the unit. Now to find a replacement for this built-in microwave is going to be a problem. The local technician stated the blower motor we need is no longer available. Thanks, GE, for at least 12 years of excellence. We are now looking for a similar replacement.

I purchased a microwave in Oct 2010. It went blank and nothing works. I checked to see if its receiving power. The power is okay. I purchased the microwave, fridge and stove at the same time. I always had confidence in GE products. Microwave should have lasted longer than less than 2 years. I didnt purchase extended warranty because of GEs reputation. Very dissatisfied customer.

We bought a microwave oven (CVM1790SS2SS, ZA301193K) for our new house some 4.5 yers ago. The flimsy, but very shiny, metal cover on the door handle split and the resulting sharp, but hidden, edge cut my finger. We covered it up with scotch tape, and ordered a replacement for the handle. We paid GE $102 (other folk sell it for $76, as we later discovered). There were no useable installation instructions. Our extremely competent handyman could not figure out how to do it and called GE for help at 800 636-2005. He was rudely dismissed and was told to look for instructions on Youtube! He spent 2 hours to install the replacement part. The screws that came with it, were not quite right. Ill never buy another GE appliance in my life. The Item was ordered by Ellen ** (It was shipped on 1/17/2017).

I live in a condominium building with approximately 105 units. We all had the same GE microwave installed in our units approximately five years ago (contractor-installed). I sent out a mass email to all of the owners to ask if they were having the same problems I was having my microwave, which was the touch panel will not accept commands. I received approximately 15 complaints from various homeowners with the same complaint.When I called GE to tell them the problem I was having with my microwave, they told me a technician would have to come out and diagnose the problem. The service call would be $99.95, and at that time the technician would let me know what the problem was and tell me the charge for the replacement part and labor cost. I told GE Customer Service that there were many people in my condo building who were having the same problem and I wanted to know why each homeowner should have to pay the initial $99.95 service call fee? The response was, That is our policy. To placate me, GE customer service said they would charge me the initial fee but I would receive a 25% discount for parts and labor.In the meantime, two or three other homeowners made service call appointments for their microwave oven with GE. One homeowner was given a fee for parts and labor, which would have been only slightly less than buying a new microwave and another homeowner was not given a labor cost. In both cases, the homeowners did not go forth with their repairs, because buying a new microwave was more cost effective.I want Consumer Affairs to know GE grossly mishandled this malfunction issue amongst a group of homeowners who own the same microwave. Secondly, I realize the microwave ovens are five years old, but GE should have some record regarding failing parts along with the life cycle of this product. Lastly, I want GE to be held accountable for not telling consumers a repair cost for certain issues. There should be a cost per hour, not cost per broken item.I kept records of all correspondence amongst the homeowners of my condominium building, so I will be of great assistance if you need further help from me. Product malfunction is a GE Profile Spacemaker 2.0 Model # JVM2070SK02.

Not only does this dishwasher do a lousy job of cleaning dishes, I have just found out it allows dirt to collect under the door flange==lots of dirt! There isnt enough hot water to clean this out. Very gross--do not buy.

I bought a GE over the range microwave, model #JVM1540DNBB and serial #TS903298B, on January 28, 2010. The keypad shorted out about the middle of July 2012. The microwave just comes on all by itself when nobody is around.

I purchased my GE profile microwave in 2010 when my kitchen was being redone. I picked it for its style and the GE reputation. So far after 9 years, I hope this wont jinx me, it has been a wise choice. I use it daily.

I bought a GE dishwasher 2 years ago. The control board went out so I had a repairman come to fix it. They had to order the board from GE directly and it took 1 month or more to get the part. Then it lasted one day! Now they are telling me it cant be fixed. Really??? I expect a dishwasher to last longer than 2 years. I also bought a GE microwave that only lasted 2 years. I replaced it with Whirlpool. GE is crap now and that use to be all I bought. Not anymore. I will never spend any money on GE appliances any more.

GE microwaves are crap. In fact its not restricted to microwaves. Its their ENTIRE line of appliances. They team up with other grade e or f manufacturers for appliances (ie: LG, Samsung) and ANY GE appliance is almost guaranteed to fail prematurely. I see all these comments bucking Malaysia and in all reality the fact remains that Malaysia makes damn good stuff (think SONY). But it is the COMPANIES that build the products and how much theyre getting paid that factors quality. No doubt that GE is using the bottom dweller rejected off the assembly line parts to build their units. Most are Chinese garbage. China also builds some very reliable products but as the saying goes dumb American will buy anything. They save the best for them and sell us the crap.It is the lowest grade of those already should have been scrapped at the factory parts that GE passes off as quality and they do a good job at showing it. A cheap 30 dollar China made Emerson microwave made by Daewoo (Korean company that actually is decent) lasts longer and takes a hell of a beating compared to the overpriced rejected junk we call GE. The GE ac units are another classic example of pure garbage. Sadly the older GE works forever. That should sum it up. Why didnt the GE executives while visiting Thomas Edisons grave make every effort to step away from his grave and not stand upon it? Because Thomas Edison would pull them under.

My GE dishwasher is very quiet. It is a decent dishwasher and have had no problems with it in 14 years. I do sometimes have a problem getting it to reset to start at the beginning of the cycle, but it finally does. Other than that, it is fine.

My microwave (model#JES1139BL03 and serial#901897B) is peeling around rolling fixture that holds glass tray. I wipe it with hot water and it continues to peel off. Its almost all gone. Ive only had it two (2) years. This cant be normal. Anyone else have this happen?

2years and 2 months GE Model JVM1540 microwave purchased at Sams quit heating. Everything works other than it does not microwave, GE customer no-service says the part magna something is covered for 5 years, however the labor is not. I offered their customer no-service dept. a deal. If it was my fault the MW broke I will pay the entire cost to fix it but if it was a defective part, they have to pay the entire bill including labor ( which is the right thing to do). They declined to do the right thing.

As a landlord I have about 20 GE microwaves. I have had 8 handles break off in the last few years including the one in my house with me pulling the door open. Standing straight in front of it, just pulling regularly. Replacement plastic handles - just two pieces of injection molded plastic - selling from other companies for as little as $10 are $130.00. $130.00! There is a clear design defect here and the companys solution to it is to charge $130 for the plastic replacement part. Someone should go to jail. Literally. Please include me in the class action lawsuit.

For the amt. of money I paid for this microwave, you would think it would outlast the house. I bought it 3 yrs ago. The touchpad covering started to get warped right off the bat, and the handle was always steaming hot when you used the stove top (also GE). The other day, while using the stove top, I happened to look at the microwave, and it had no power. I checked the breaker, it was fine. I happened to notice a crack on the touch pad. After further investigation, I noticed the entire touchpad is shattered. It was clearly from the heat given off from the stove top. And I wasnt even using the microwave at the time. I sent GE an email, didnt even get an auto response. I am going to call them, but we all know what they are going to say, and I am not paying $482 for the part. Was hoping there was a recall, since so many people on the net complain about the touchpad.

I am now facing my 5th repair appt about my 2 year old microwave. I have spent nearly $300 on repairs to be told I can purchase a new one for 50% off. Well, $426 plus my $275 I have paid IS A NEW One! 20 hours of me having to be available for service. I did not know the life of this appliance was 2 years. GE complaint number **. This is an unacceptable resolution offered by GE!

GE brags about employing its own service technicians yet, when I called to schedule an appointment to fix our Advantium 120 microwave (3 years old), they told me that unless I provided proof of purchase to the technician, he would charge me even for parts under warranty such as the magnetron tube. This in spite of the fact that they have all the purchase information at their fingertips, as I reported when we registered our purchase. They even told me our date of purchase, had our address, email address, etc. They dismissed my suggestion that an email from them to me that I could show the technician should suffice. After 3 years and severe family health issues, I have sadly misplaced the proof of purchase, not realizing that registering the appliance for warranty provided no real benefit; not even proof that I didnt steal the thing. I am saddened that a company of the former stature of GE would stoop so low to avoid a legitimate warranty repair.

Our first microwave lasted 15 years now this one 1.5 year. No help just buy a new one. Or pay 100 for their service call. 100’s of consumers with same exact problem and they just get away with it. Ridiculous.

PVM1870SMC ($580 plus tax/Cost CDN). I bought all new GE Profile units in mid 2010 for my new house. I spent $7000, plus tax, for 4 items from a reputable company in Hannon Ontario. I bought a Fridge, Dual fuel range, Dishwasher and last the Microwave, model stated above.About 6 months back it started acting funny, but thought not too much of it as it was very intermittent. Today the Microwave will NOT seem to shut off after it beeps from cooking/warming up food and the door is open then closed. I close the door and it starts to hums. If food is in it, you can see it is still cooking. I open the door, and then close it again and it starts to Humming as soon as the door closes.The glass tray does not turn, nor does the light go on (when humming) as it does when you actually push the start button. If you do start it, everything works, that is the table turns, light goes on and it cooks/warms food etc. Then it beeps when done, you open the door to remove items, close the door, and again just starts humming.I unplug it for an hour, but as soon as you plug back in, again.. Hums until you open the door. I put a cup of water in it, and just closed the door, did not push the start button. After about 40 seconds, the water started to boil.

I bought this Microwave JVM3160 on December 2016, after six month the handle door broke but it was replaced as part of the warranty. By January 2018 (no more Warranty) it began tripping the circuit breaker. I change the power source for a dedicate circuit only for the microwave 20 AMP. The microwave blew its own fuse. I replaced its fuse. Then it blew the 20 AMP circuit breaker. That was enough. This microwave went to the garbage after 1 year and 2 month of use.

I was missing my wiring/ schematic diagram with my dishwasher and after spending hours on GE website to no avail I called the service center and was told they would send me an email that I would have to respond to and then they would email me a diagram in 8-10 business days. Email in 8-10 business days... WHAT!!!! I replaced the UI board after 2 1/2 years and the control board Fault code LED was blinking 7 times for a temperature sensor circuit has become inoperable. This is their fix; Disconnect the power at the circuit breaker for about 30 seconds and then reset the dishwasher. If the problem persists, contact service. No instructions on how to reset the dishwasher anywhere. American business at its best. Never GE again!

Bought GE range microwave JVM3160DF3BB11/16 from Lowes. Tripped the breaker. Replaced the breaker with a new. Would immediately trip the breaker as soon as you pushed the start button. Last time it tripped the breaker oven went dead. Wont even light up. Junk. Do not buy made by Haier in China with the GE name on it.

Our Spacemaker microwave, which was installed over the stove August 2008, suddenly stopped heating food. My husband called GE, and their phone advisor advised us the microwave was under warranty. She said her computer screen showed our product registration, and she also saw we owned three other GE products. Fast forward, the GE repairman came and said the microwave repair cost would be around $400. The heating part wasnt under warranty nor was the labor. Mind you, the entire microwave (new) was under $400. We called the GE service center, and they refused to honor what their representative had told us. The most they offered was 50% off. I dont accept the premise that a new appliance should only last four years. I will replace my unusable microwave with a competitor’s brand and will pledge never to purchase a GE appliance again. I will also sell my GE stock, for I now understand why its going nowhere.

This is the second GE microwave. In 2 years I have had that, the paint peeled off inside the microwave in sheets! I contacted GE the first time and was offered no help or explanation. I was told it was an older model, even though I bought it new. This time, I just chose to throw it away and never purchase another GE appliance again!

I had a GE microwave that matched the GE range that was already in my condo when I moved in. When the range died, I got a new, matching microwave too. I like the way it works, the controls are intuitive and its easy to clean. No complaints.

Its a GE microwave/Vent Hood. Inexpensive. We replaced our last one (which was the same one). Nothing special about it. It performs its purpose. The vent hood has a 2 level light and a 2 level vent function.

My husband and I enjoyed our 1980s White GE Microwave and Stove/oven. But, after 15-20 years with the same appliances, we finally saved up for upgrades and purchased a new Stainless Steel (mid-range priced) GE Microwave and stove/Oven. I cannot begin to describe our disappointment. The Microwave is above our Stove/oven. Our old microwave had two powerful lights underneath it - one on each side. This microwave provides one small, weak light that does no good any time of day. Why would GE go from two great lights to one middle useless one? Also, the faint white numbers on the front keypad of the microwave are barely visible during the day - forget about seeing this when the light is not perfect. I foolishly assumed these numbers would be backlit on a black background. Onto the Stove/oven. The temperature is not accurate but that is something we can deal with. After the oven is pre-heated, the assigned temperature stays on the display pad - NOT the actual time. Who cares about the temperature you set the oven to - dont we all need to know when to check or take out our food? Our last oven always showed the time. We did not join the Stainless Steel bandwagon 10-15 years ago when others did - which we thought would be good for GE to get some kinks out. I Guess we should have waited 10 more. Proper lighting on your Microwave and The time on your stove/oven while cooking are not too much to ask for when we just dropped at least 2-thousand dollars!!!!!

Bought a GE microwave and it broke 1 year and 1 month after I bought it, called and found out it would cost more to fix than to buy a new one. After reading other peoples report on how GE treated them on their problem, I will not buy GE anymore.

I had my original microwave for 20+ years. I replaced it in 2009 with a GE Model HVM1540DN188. Started beeping in middle of night a week ago, with message keyboard shorted service needed. I unplugged several times and it would start coming on by itself. I cannot believe they dont warranty their shoddy keyboards. I am very angry. I think they should stand by and replace their keyboards free of charge since they are fully aware they are making deficient product. This is scary to have an appliance just start beeping and say shorted... luckily I had my original wired in microwave replaced and put in a plug in or I would have flipped out if I could not unplug it. I got this along with the GE stove... so far the stove is not beeping...

I work as a service tech for a major insurance company. I am a master tech, and master electrician. The company that I work for owns an apartment complex which is used to house company executives whose offices are located at other sites, but often come to the Chattanooga Site to work short term. I was called to repair an old dishwasher in one of the apartments. Upon looking at the existing dishwasher, I decided to replace with a new one. I received a new GE model GDF 510 PGD 1WW dishwasher on November 8, 2013. As usual I unpackaged the appliance and examined the exterior. Finding no visible damage, and with the help of a master plumber, I removed the old dishwasher, and installed the new one. After all the connections were made, I opened the door, removed all the packaging from the dishwasher, and found the upper spray arm lying in disarray in the bottom of the machine. Assuming that this was the way that the machine was packaged, I installed the spray arm, plugged the machine up and started the machine as the operations manual instructed. The machine would not work. The power lamp would burn solid for a few seconds and start flashing. I tried to start the machine a number of times while reading the instructions, and while my partner read the instructions aloud, but with no results. Finally, I used a screwdriver to hold the door switch closed, pressed the start button and the unit started. The catch mounted on the door would not make the door switch, mounted on the machine body. We tried to adjust the switch and the catch, but with no success.The dishwasher did not show any signs of exterior shipping damage, but for some reason the upper spray arm was off and lying in the bottom of the unit, I found a small piece of broken plastic and a screw in the bottom of the machine, and the door switch would not make. Outside that I have no complaints. I am not sure where this machine was assembled, but it certainly was not equal to the machine that we removed. Thanks GE for making my job harder. I will have to find another dishwasher Monday and replace the damaged one, and perhaps send this one back, but the replacement will certainly be another brand.

Im very pleased with this microwave. Size appearance and price were right on point. This has a built in turntable with presets that actually work! It is an easy to find product and available thru quite a few retailers.

However, the GE Monogram Microwave ($499 at Best Buy) broke down 17 months later, a few days before Thanksgiving 2015. GE claimed it was out-of-warranty, and I would have to pay $99 to have a technician look at it, and would charge for repairs. We are stuck with the GE Monogram Microwave as it is a built-in unit and our cabinet is built around it. So we went and got a new one from Best Buy. When the new one came and when we removed it from the box, it had a large dent in it - a very large one. It clearly indicates a shoddy QC job, as the unit should not have left the factory with such an obvious dent. We asked BEST BUY to replace it, but a new one is not going to come till after Christmas. So it was 2 strikes against GE Microwave ovens for me.We spoke to GE and they were not very sympathetic, and amazingly did not even apologize for the inconvenience caused!! They just stuck to their out-of-warranty mantra, which I understand. But then the occurrence of a second event with another GE Microwave, and the inconvenience of sending back a big dented one was also not acknowledged or perhaps even understood by their CS representative. So it is strike 3 against GE Appliances for me.I would never recommend GE microwaves and was totally disappointed with the Customer service of the GE Appliance division. I also have GE Cooktop and two GE wall ovens and shudder to think what will happen if they should break down. Just sharing a sad experience that holds some lessons for me and my family and friends. (Rethink buying GE Appliances.)

I had a problem with my GE Profile Dishwasher that I had for several years and I had it on factory warranty. However, the last time they came to repair, they did not have parts available to fix anymore. So, they recommended new one. I worked with Consumer dept and made arrangements to replace with one they recommended at $500+. After several efforts to get it delivered, it was and we began using. It is not a Profile like my old one and it does not have the additional washing, rinsing and drying cycles as the Profile. It is a flat out bottom line washer. No, sani clean etc.. We have used the machine about 4 times and each time we have to rewash several of the dishes and especially the silverware. This is the most disgusting piece of equipment I have ever used. My home is loaded with GE products from years ago, mostly the Profile series and I have been delighted with the products and service. This machine is a disaster. I cannot believe that GE has this on the market or maybe this is a machine they use to satisfy customers who may threaten to use someone elses. It was not free, as I say it cost over $500. The stores and onlines advertise better machines on sale for less. I have GE stock which I will sell. They are going down on Quality. Consequences: Stuck with poor machine that does not do job that I paid good money for. Really, GE, get yourself together. Product Model:GDF510PSD1SS.

We bought a GE dishwasher a little over 3 years ago. In the last week of September we awoke to the smell of hot or melted plastic. We found the source to be the dishwasher. I had loaded and started it before going to bed the night before. The counter-top above the dishwasher was stove top hot and upon opening the dishwasher found that a cutting board that we have had for many years and have always put in the dishwasher had melted on top of the heating coil. Dishwasher safe items on the top rack melted as well. It had been drying for at least 9 hours. After pulling the dishwasher out we saw the heat shield had melted and was crumbling. We contacted GE, sent them all the pictures and they told us it was not a safety issue. We have no doubt that if we had not woken up so early we would have had a fire in our house caused by the dishwasher.

Bought a GE dishwasher that a service bulletin was generated by GE on a fault in their manufacturing. DD03-16 for reference. The door does not stay shut and continues to open. GE customer service suggested replacing hinges and brackets on the door. So I ordered the parts and changed them. It did not work. I called them back and they suggested purchasing and replacing additional parts. I called a local 3rd party and they provided the service bulletin and said that this is a problem in the design of these models. GE will not repair the problem. The cost has been shifted to me or they suggest buying a new dishwasher for only $150 over retail. They are hiding behind a warranty that expired, but the problem started at time zero when it was made. This is garbage and I have been without a working unit and continuing to argue with them over the repair or replacement cost. Call if you have this problem because they have identified it and have a solution that they will not tell you about.

GE Profile Advantium 120 when cooking on stove under microwave, the fan in the microwave goes on and does not go off for 30 minutes. This happens with only one burner on and stove not microwave set at 320. Had service out told there was nothing he could do. Called GE and again told that there was nothing they could do.

Emptying out the dishwasher I purchased in October 2016 is a cause for rage these days. Dishes, glasses, silverware, etc...come out of any wash cycle dirtier than they went in, though I have tried everything I can think of to see if anything at all can make it better. I purchased the dishwasher from BEST BUY. Little did I know, they dont take anything back after 15 days of purchase. They promptly referred me to GE. In turn GE reps said that their warranty only covers REPAIRS for the first year. In short, sucker me who spent near to $600, is stuck with a VERY BAD product from the moment I paid for it. And there is nothing I can do about it!!! GE IS CLEARLY SCAMMING ITS TRUSTING CUSTOMERS!!! I have been robbed!!!

Needing some type of warning to indicate a clog or break down. Cycle: Pots & pans; heavy wash; normal wash; light wash; hot start; high temp. wash; heated dry; energy saver; cycle on: plate warmer; start delay (hrs) off, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1; Hot start plate; Pots & pans start; heavy/normal; high wash; heated dry off-rinse only. The color fits my kitchen arrangement. Needs to have a better warranty coverage. Needs a longer warranty on the basic coverage. Do away with extended coverage. Offer all parts and full labor for a longer time.

I just found the site for the review on 5/17. Ive had two GE Cafe microwaves model CVM2072SM3SS purchased at the same time for the two kitchens in the house. The microwave in the in-law suite lasted one year and I replaced it with a very economical one which has been fine for 3 years. The electrician could not repair it. The microwave in the main kitchen is 5 years old but it stopped working (same issue of frozen panel) after 4 years. In Nov. 2016, during Thanksgiving weekend, it froze and stopped working. I looked on YouTube and we cleaned the terminals in the panel using alcohol. That worked for 2 months. When it stopped again I tried the same remedy but it did not work. The panel lights up, but it will not respond to any commands. After 7 months of it being inoperable, I decided to either fix or replace it (while using a way cheaper GE from a friend).This is an abysmally poorly engineered VERY expensive microwave. The LED panel is a disgrace! Do not buy CAFE microwaves. Im out $1500+ (for two) plus the replacements, the aggravation, the ugly looking counter with the loaner from my friend. I am ready to bite the bullet and buy a microwave that fits the style of my kitchen. It wont be a CAFE! Although it is a set... Enough is enough. I give up.

The way you put bowls in this model doesnt allow for cleaning them completely. You must wash the bowls AFTER cleaning them in dishwasher. Waste of time & money. Capacity smaller, noise louder. Not good value.

My microwave is a very easy to use. The settings are not complicated and offers a variety of options. It has a shelf and turntable that can be shut off and on. The filters are very easy to access and clean.

Just two years old, the interior paint in my GE Microwave JES1072SHSS started to peel. I called customer service, then emailed, learned that the paint peeling posed no health problem, then, as a gesture of goodwill, given a $75 rebate. I foolishly bought yet the same microwave today (and will return it) as I read here on this site: not only is it unsafe to use a microwave with peeling paint, GE had a class action suit over this very issue and never took responsibility for the health risks to loyal consumers. So it gets returned this week. But PLEASE BEWARE. Gosh, I really bought the goodwill - hook, line and sinker! Then I read all the complaints here - about peeling paint.

I am very pleased with its functionality, its power and its appearance. I got it on sale so the price was good as well. I have had GE microwaves in the past and found them to be reliable appliances. I will most likely purchase another when the time comes to replace this one.

The GE over-the-range, model JVM316URFSS was installed in our new home by the builder. We have been in the house and used the microwave moderately for the past two years. Last night, out of nowhere, the microwave started running. I realized that it was actually heating when the glass turntable popped. I jumped up and opened the door to stop the heating. The turntable was broken. The interior was incredibly hot. Having read several reviews I realize that this is not an uncommon problem. I am going to buy a replacement but I am very concerned by the fact that GE is aware of this recallable situation and continue to allow this product to remain on the market. I will NOT purchase another GE because apparently they do not care. Our house could have burned down had we not be home.

Today I heated some spaghetti sauce in my microwave and it splashed, so I wiped it out. My microwave is built in and was pretty new and in the house when we bought it 4 years ago. It is in the base counter so I have to reach down to clean it. l havent had a problem with it but when I wiped the inside top I felt bumps and when I looked at the cloth to see what was on it, there was paint on it. That has never happened before so I of course looked and there is a fair amount of peeling paint in one spot. I have had microwave ovens for many years. Never had this problem with any other brand. What is that?? Can it be fixed? Is it dangerous???

I also bought a stove as well as the dishwasher. We Told them with great concern to put a extra warranty on the more expensive item, which was the dish washer... more could go wrong. We all agreed, including sales person. Day before the first year, the dish washer was not draining good. They said the warranty was running out. I told them, I had got extra yr warranty. The robot voice said it might be over. The repairman came in, and said the same thing. The repairman replaced everything in the dishwasher. It took him 3 visits. He got it working. He claimed there was an extra orange ball in the part and that why it didnt drain well.I started using it for 2 weeks and it stop draining completely. When I bought it the salesperson said, See I added the extra warranty on. But unbeknownst to me, she put it on the stove... How the heck am I supposed to know she did it wrong. I call the company and they said, Look at your receipt. And sure enough, it was on the stove. Looking at it and how the salesperson made it sound, it was understood by all that the warranty was on and I had an extra yr on the dishwasher... I looked at the receipt. Had a list of what I bought the warranty and we were good to go. Everything was replaced in it, everything. It was a mechanical issue and yet here it sits not working and I havent even paid for it. I am disabled and was give a lemon. I would never recommend a GE anything. This was a first... I usually buy Whirlpool and never ever had a problem... Theyre selling lemons and they know it.

I called to see if someone can help me figure out why my built in microwave is running but no heat. Apparently the customer service keeps insisting I need to schedule a service without offering any kind of help. Why do I have to pay for a service trip when I can fix it with the right part? Unlike other appliance they always have customer service helping to see and figure out what might be wrong to the appliance.

GE Model JVM1540LM5CS - Fire inside microwave while making popcorn. Top center piece, inside microwave, caught on fire. Was able to quickly contain the fire to the circular plastic cover which I removed. Called GE customer relations for service. The service technician that came to repair our microwave said he had just come from a customer with the same problem. Sounds like GE should take a close look at the plastic piece that catches fire and see about replacing it with one that wont burn.

We purchased a new home with a GE Profile dishwasher installed. Since the day we had it, we have never been satisfied with the cleanliness of the dishes. They frequently come out covered in food and must be rewashed. We now routinely prewash everything in the sink and we always use the cookware setting to wash everything. Despite this, we still have to re-run loads because they are not clean.I am convinced that there is a design error with our dishwasher, because the top dish shelf obstructs the door of the soap compartment and prevents it from fully opening. After a load has run, you can still see leftover soap dried and crusted in the soap container. If the dishwasher cannot even wash the soap out of the soap compartment, no wonder our dishes are not clean.

I owned this microwave for the last 5 years. Easy to installed, good appearance, stainless steel, easy to operate but fancy enough to prepare different meals to include the younger ones. Lighting very good and vent excellent.

After heating some water in the microwave, I opened the door and removed the water. A few minutes later, I heard a noise and noticed the microwave was running and the control panel indicated it was off. I opened the door it turned off. Closed it and it was on. Smelled something burning electrical in nature. I had to kill the circuit breaker to turn it off. I opened the door and felt the inside of the microwave and it was extremely hot. I was concerned that it could result in a potential fire, I continually checked it until I felt it was cool.

Our GE Microwave Oven/Convection Oven Combo (Model: PT970SRSS) is a little over 2 years old. The interior paint on the ceiling of the microwave oven is chipping and bare metal is exposed. In addition, the microwaves glass turntable frequently slips off its plastic tripod base. Circular scratch marks, which also expose the underlying metal are evident in the area which is located directly below the glass turntable. The circular scratches are a direct result of the glass turntable scraping against the paint. The GE repairman said chipped paint is not repairable and that paint should not ever chip in a microwave, let alone a relatively new microwave. After many calls back and forth to the GE Consumer Relations person, we were offered a new combo at a discounted rate of approximately $1,000. (We paid around $2,000 originally.) Im not satisfied with this offer. I strongly feel that consumers should NOT have to pay to replace a defective item. GE needs to pull these defective and dangerous products off the market! Take a lesson from GM!!!

My 2-year old microwave and range handle(s) have paint peeling issues. GE has a program to replace the microwave handle. They DO NOT have one a similar program for the range (same paint peeling issue on the range handles/rings). They offer a discount cost for the range handles. I am sending them pictures and another formal complaint.

On 05/20/2014, our GE microwave over the stove unit burst into flames. My wife was using timer and walked away then turned around and heard the microwave fan start (spontaneously). Then she observed flames/smoke reflected in the Microwave window. She observed the interior of the microwave was aflame. The fire was extinguished with a rag & water. The burning items appeared to be plastic/insulation. The fan from the microwave was with the burning insulation on the rotating plate. Had this unit only 14 months during that time the microwave fan would turn itself on for 3 minutes and then turn off all by itself. Happened twice in 14 months. Glad we were at home and were able to extinguish the fire. Called Lennar the builder who put this unit in to take pictures and check electrical. Was told the GE unit was bad to call GE. I know this will be a hassle as others have had this same problem with not so good results.

We purchased this dishwasher for our rental. The last dishwasher was over 30 years old and still working but the racks were coming apart so we opted for a new one from Home Depot. A year later our tenants called saying when they used the dishwasher it rained in the basement. Our maintenance man called and said the dishwasher melted a hole in the right side about 1.5 inches by a 1/4 inch. Midway to the heater element. He did a temp fix with silicone.I called GE Recall number and was told it was not on a recall list. I called customer service and was told they would waive the service call. I explained this was a FIRE HAZARD. They insisted all they could do is send their tech out for repair. Since I paid about 280 dollars for the dishwasher I decide a service call would probably run near that and told them NO! I am now sending all information to consumer affairs department with my STATE REPRESENTATIVE. I also am putting the fire hazard info out there on facebook and twitter. I am waiting for someone else to say they also had a fire hazard. This should be on a recall list!

We have a GE SpaceMaker JVM 239BV 001 over the range microwave purchased about 10 years ago. Within one year of installation the handle snapped - just as numerous people here have stated. I went to our local replacement parts store and was shocked that it cost $30 for a new handle. The sales person said if I were you I would by the lifetime warranty for an extra $3 because you will be back, I sell lots of these.

Two years ago, after owning a GE JVM1490 microwave-convection oven (over the stove) for three years, the door handle broke.Let me clarify that I worked for GE first as an engineer, later as manager, for 20 years including 6 in Major Appliances. I am ashamed of what I am reading how GE is treating customers today.I am perfectly capable of replacing the handle myself if I am provided the complete and correct assembly drawings and/or instructions. GE refused to provide me anything when I requested them. The scant drawings and instructions I found online are insufficient. As a matter of fact, the design is so poor that removing the internal bezel, which you must do to reach the handle fasteners, forces you to break the mounting tabs, requiring replacement of this part plus the handle. This was confirmed by the parts store I visited.However, even after removing the bezel, neither I nor another ex-GE appliance engineer could figure out the access to the fasteners. I have glued the handle three times using epoxy and Cyanoacrylate (super glue), but it has broken off a fourth time. I will figure out a way of fixing it before I pay GE close to $100 for both the handle and bezel. And if I replace the appliance, you can be sure it will not be GE.GE should be ashamed of the poor design and deplorable customer service they are giving now. How things have changed!My suggestion is that all with this problem post name and phone number of GE customer service personnel they spoke with.

We bought this GE Dishwasher through JC Penney with a 3 yr extended warranty in Dec 2017 thank goodness. I am on my 3 round of having the mother board and the heater replaced since I got this machine. This last tech came as a 2nd opinion for my claim that this machine has not worked more than it works. All we would do is load the machine, go to turn it on and out it goes. The warranty people sent out a GE Tech who ordered a new board and fuser kit and came to put it in. Same issue, he said it was my hard wiring and I should have a electrician look at it. 200.00 later not the hard wiring. It is a pin hole in the heater coil that this last tech found. New heater now on order. My faith that this will fix the problem is waning. After this my warranty will be up and I will Never buy a GE appliance again. Not worth the money.

I purchased a General Electric model peb7226df1ww in 2013. It lasted two years, then failed. I replaced it and two years later the replacement failed. At least GE microwaves are reliable in that aspect. You can count on them to fail. I am convinced GE installs a delayed kill switch on their microwaves to help their revenue stream. This was the last GE appliance I will ever purchase.

I purchased a GE Profile stocks in 2007 and a GE microwave model JVM7195SK1SS purchased 12/30/16. We have replaced the knobs on the stove 2 times because of peeling in the past. Now we need to replace the microwave handle. The handles and knobs look like metal but they are cheaply made white plastic covered with a sharp silver coating that peels. It appears the knobs get overheated when the oven opens and the microwave handle from the steam when cooking on the stove. Last night I cut my hand on the handle! We reordered the faulty handle and now getting charge $100 from GE. The company should take responsibility for their poor design and replace it for free with a nonpeeling part. I know that we will get the same handle and won’t be able to use the burner below or hope that using the fan will keep it from cracking again. I would never recommend a GE product again.

Entire inside is plastic crap. Dishwasher is very loud and takes a long time. Racks are ok but cheap feeling. If I was choosing, I wouldnt buy it. This GE was in new house. Overall feel is very cheap. Too much plastic. Very low end builder model. Steel inside or heavy plastic will take more beatings.

We have a 2017 GE profile built on microwave. The microwave started shooting fire inside the microwave a year ago. GE fixed it. Last week the microwave started shootings fire inside the microwave again. This time it was much worse. The GE technician told me it was not fixable. I called GE customer relations and was told too bad because it’s not under warranty anymore. They offered a minimal discount on a new similar model. The attitudes of the customer care representative and supervisor took me by surprise. They were curt and told me, Guess you should have gotten the extended warranty. When it comes time to replace my kitchen there will not be any GE products in it. GE does not stand behind their products. The tech told me there are issues with the profile microwave and he felt they would replace it. They did not replace it and were rude. I have been a loyal GE customer. Not anymore.

My dishwasher came with the home when we purchased it, and we did not see any good reason to replace it. It is a standard model, with a nice stainless steel interior. We have had no problems with it and plan to use it until it fails. I would like to have the upgrade model in a new home. This one does a good job washing the dishes.

We have a GE Profile Microwave (PNM1871SM3SS) that is only 3 years old and is reporting KEYPAD SHORTED - SERVICE MAY BE REQUIRED. We called GE service repair and told them the exact message. The service guy shows up and says all he has in his order is General other service needed and that he doesnt have the keypad panel. Gives us an estimate of $501 to repair it. Tells us a new one costs $400 and with a coupon he can give us it will be $100 less. We were charged $99 for this visit which basically lasted 10 minutes (way to go GE on making money off faulty devices you sell). The service-person also told us that the average life was 10 years for these, but this one crapped out in 3. He said if we get another GE microwave, it will fit right in there and that I can do it myself if I am handy but after reading all the reviews online, I am skeptical whether I should get a GE microwave again or not!

I purchased a newly built home which had all GE appliances in the kitchen. After 2 years and 5 months, the microwave no longer heats the food. I had a 3rd party appliance repairman come to do a diagnostic evaluation. He informed me that the magnetron has gone bad. To have this repaired would be the same price as purchasing a new microwave. He also informed me that the magnetron should never go bad in such a short amount of time. I contact GE and my warranty was for 2 year so the best they can offer is a $75 good will certificate. What this means is I have to purchase a new microwave and send in proof of purchase and in 4-8 week, GE will send me a $75 rebate check.I am disappointed in the GE product. Their products are now made in Asia (my microwave says made in Malaysia) for cheap labor and the quality has gone down. What is worse is that they do not stand by their product. The fact that something as serious as the magnetron went out in less than 3 years is a red flag that it was not assembled correctly. The microwave is listed at over $500. I would have been happy with GE even paying half but $75 will not even cover the cost for shipping and installation. I am very disappointed.

Microwave fan just stopped working. Dishwasher wont dry dishes. Also, cloudy water drooling down door when you open it. If you set it on heavy or normal, it runs forever. This is horrible for a year old product. They were acting up before then. Busy schedule kept us from reacting. Looks brand new, works like its 20 years old. Help.

GE dishwasher GDT680SSH2SS - I don’t normally do product reviews... In this case, I am making an exception. This is without a doubt the very worst dishwasher I have EVER owned. I’m pleased with myself for buying the optional insurance when I bought the dishwasher from Home Depot. It has been repaired 6 times. It even had to have the main seal replaced. It flooded my kitchen and ruined my floor. My homeowners insurance sued GE. I think it worked fine for only 6 months...then it went downhill. It is extremely loud! It sounds like your dishes are being destroyed... No, I’m not exaggerating!I have NEVER had issues like this. I bought this GE as I really like the screen bottom so that large particles didn’t get caught up inside the pump etc... As I’m typing this, I have it set for Sani wash and the water isn’t hot at all, and it had standing clean water in the bottom when I opened it up this morning. I will also note, I rinse all my dishes before putting them in. I will never buy GE anything again.

Purchased my GE Profile series dishwasher several years ago and it has served me well over countless cycles. There have been a couple of occasions that it required repairs (water leaking) but had been done so under warranty conducted by an actual GE tech. When this unit finally reaches its usable service life I’m most likely to consider a GE unit again.

GE Profile Microwave wall oven combo model PT970SOM1SS - We have a few years old unit very gently used. However, we now have the paint peeling and flaking from the top and back interior wall of the microwave. Some spots have bare metal exposed. Contacted GE and they told me there was no fix for it other than replacing the device. Now they cannot replace the Microwave alone. The whole unit has to be replaced at a cost of ~ $2800.00. This is ridiculous. There should be a recall as there are several other complaints about similar issues.

Generally ok, but the entire wash cycles take way too long. Certainly much longer than the older models. I guess thats more or less the case with most dishwashers today. It makes me hesitant to use the dishwasher when I consider all the energy it takes to function. I would prefer having a setting for speedier rinse/wash of just a few dishes.

I've always enjoyed GE products for a number of reasons. They are dependable and with care will last many, many years. My refrigerator lasted just over 20 years! My microwave is easy to clean and has never let me down over the years I've had it. GE products just last longer than other brands.

On 05/04/2014, our GE microwave over the stove unit burst into flames. My wife was sitting in our family room and heard the microwave fan start (spontaneously). Then she observed flames reflected in the kitchen window. When she went to the kitchen, she observed the interior of the microwave was aflame. The fire was extinguished with a spray bottle of water. The burning items appeared to be insulation. The fan from the microwave was with the burning insulation on the rotating plate.

I have a GE dishwasher installed by our builder. It is 6 yrs. old and for 6 yrs. it has been a problem. I already had it serviced in last years recall and now I get another notice. It is located close to our TV viewing area. and is so noisy. I hate to run it when we are watching TV. I would never buy another GE. We are also having problem with our GE double oven. I ruined several holiday dinners before realizing the temperature was 75 degrees where it should be. A replacement part is almost a $1,000. I would never ever buy another GE appliance.

We have a GE built-in combination oven and microwave. The oven gets up to heat very quickly and bakes in less time than recipes call for baking. The microwave is an 1100 watt unit and performs equally well, and has for 29 years, Our cook top is a GE glass top unit, installed 11 years ago in a kitchen upgrade, performs equally well, though not quite as fast heating as our old gas unit but much cleaner and attractive. Have never required a service call on any of this equipment!

While heating a bowl of butter, my microwave arced. Microwave had smoke and electric fire smell. I have contacted GE. They said it was a rare issue. From the reviews on this site, I do not believe that this is a rare issue. They offered a 25 dollar coupon to buy another one. I do not believe I would do that. GE has had microwave recalls in the past due to fire hazard. I have registered a concern with the Consumer Products Safety Commission.

I bought this over the range microwave in 2009 to go with my other Cafe appliances (dishwasher and range). After a few months, it stopped working and ge sent a repairman to fix it under warranty. He took it apart, replaced the touchpad panel, but told me that the old panel was still good and that I could keep it for the future in case I needed it. And I did. It stopped working a year ago. I took the whole machine apart, put in the original touchpad, and it worked. Until about a week ago. I went away on the Fourth, and when I returned 3 days later, I had the same problem for the third time. I just called ge service and was told that the replacement for the touchpad is $600. When I started to say that I could buy two Microwaves for that amount, the ge service person cut me off and asked if she could help me with anything else. Rude. In addition to this, the Cafe Range ($3000) has three unusable knobs because they were made of cheap PLASTIC and are cracked.They just spin and turn nothing on. When the third one broke, my wife had turned on the power boil and was unable to turn it off until I came home 2 hrs later. A huge FIRE HAZARD!! To replace the six knobs is, you guessed it, $300. I could buy an inexpensive stove for that. I have purposely used ge in lower letters because that is the way I feel about their appliances and their service.

I have used 4 dishwashers of various brands in my house over the past 30 years. The current one is a new GE dishwasher (Model No: GDT695SSJ0SS), which is by far the worst. The dishwasher never dry, no matter which cycle I choose. When it is done (green light on) water still flowing down everywhere inside - on the door, on dishes, at the bottom. When I called GE customer service it said I have to use rinse agent in order to get it dry. Of course that means we have to constantly buy that additional product (made by a GE subsidiary?).For those who dont remember this, our old dishwashers did not required the use of additional product and still dried dishes perfectly. GE is apparently producing products of lower quality, yet the repairman sent by GE claimed that this model is their best ever. Really? Is this company so arrogant that it pays no attention to the convenience of its customers? Since the repairman found no defect with the machine (even though it does not dry), GE refused to accept either a replacement or a return. From design to functions to price this is indeed a lousy machine. Ill never purchase another GE product again.

Our microwave is spacious, simple to use and dependable. This is about the fifth microwave I have had. The others only lasted about 6 months. My current microwave is about 5 years old, despite the fact that some of my previous ones were also GE.

Nothing happened...never has. It just wont wash dishes. I have to prewash every item that is put into this piece of garbage. I bought it new and have used it for 3 years. It remained in the box the first 5 years I owned it and it honestly did me as much good in the box as it has since we installed it. It makes a good rinser but wont even wash off a lemon seed left in the bottom of a glass. This is such a joke. I would never buy another GE product. The refrigerator I bought at the same time, a side-by-side, the entire front door froze solid within 2 years and we had to buy a new one. Your company stinks. This is a rip off of my money. Refrigerators and dishwashers are not cheap. Model GSDL122F02BB is the dishwasher.

GE states they do not repair microwave ovens under warranty. Instead, they offer to reimburse you at MSRP for repurchasing the unit if you will show evidence you have ruined the units operational function. The interior bulb burned out in my unit, I disabled the unit, sent in pictures and receipt. They sent a coupon for about $30.00 less than MSRP and lied about the conditions of reimbursement. Brendia, the agent I spoke with, broke off email contact when I stated the unit was no longer available from the sellers on the GE seller list (including the seller I originally purchased from), and that the unit was only available at MSRP from the online sellers I could find. My microwave is inoperable and GE has not responded or offered to increase reimbursement to MSRP. I have not located a chain of command to whom I can report Brendias dishonest management of my case.

We purchased a GE Profile Dishwasher from PC Richards & Sons in 2012. We purchased the extended warranty. The top of the door started to rust on left side within the first year. Death in family and called just after warranty ran out. The rust turned into a little hole. Door replacement was no longer available when I emailed GE directly this year. GE Representative sent me a $50 rebate to use to buy another GE. The dishwasher works wonderfully but appearance is awful. I will never buy another GE appliance.

Dishwasher is 3 months old and today is the first time it has worked! GE has sent repair techs 3 times and finally today the unit was temporarily repaired with electrical tape attached to the brand new door latch. The door latch is cheap plastic and has a manufacturer design defect of being too small to properly engage the unit when the door closes, thus not allowing the cycles to start just a series of beeps. No other manufacturer uses a cheap plastic door latch designed like this but GE! Piece of crap, dont buy it!

My dishwasher is probably 15-20 years old. It only is run about once a week but is still holding up. Does a pretty good job of cleaning but I do a pretty thorough wipe down before loading. Great value for the money. Hope you get a stainless steel version some day.

Front of door never seems to clean up well and its stainless steel. Occasionally if you use the start delay and a harder pod it can stick and not dispense fully during wash leaving a chunk of it. I love the ability to run half loads. Smartly designed, and easy to use.

Not very satisfied with the functionality. Turntable does not work or has ever worked. Time features and power adjustments are not very intuitive. I would not recommend this brand, I believe there are other brands out there are much better for the same price range.

Purchased GE Dishwasher, Model GDF540HGD488. Its two or three years old and is junk. Top rack rails failing apart, bottom rack sliding rails have melted. Bottom sprayer has melted and wont stay on, incoming water has it bouncing on the bottom of the machine. As the heat dry is in it smells like melting or burning plastic. Dishes are NEVER clean and need re-washing. GE will do nothing, warranty off. Repairman says its just the type it is. Replacing it this weekend with a new Maytag, no way I would ever consider buying another GE product. Worst Dishwasher I ever owned.

We have a lower end GE stainless steel model that came with the purchase of our new build home. The washer is just average and does not have a huge capacity. For only 2 people in the house it gets the job done in general.

GE profile microwave TOUCH SCREEN pvm2070sm4ss - Almost new. Used properly. Touch screen failure. TOUCH SCREEN does not function properly making it almost impossible to use the microwave. This Common Problem should be a RECALL.........

20-month old G.E. Space Saver microwave (HVM1540) started to fizzle out by showing signs of running, but not heating; display flickering on and off with odd symbols; and vent, at times, not able to turn off unless I unplugged the whole unit. Anyhow, brand new home with brand new GE appliances, and I have had to replace the ice maker three times in my GE Profile refrigerator, and now this, my microwave. Service department stated that if I pay for the service call and the magnetron, they could guarantee the part for 5 years. But if it should go out, I would have to pay for labor again. Labor is guaranteed for 30 days. No thank you. I am very disappointed in GE products. Single mom, on a single income in rough economic times, I cant afford to purchase GE products again, and again, and again.

Bought our GE Microwave (DVM1850DMWW) from Home Depot about 5-6 years ago. I can see a unit just failing; but to start burning, smoking and smelling is non-excusable. We were lucky enough to be in the kitchen at the time and catch the problem before it escalated. While the unit was just ok while it worked, potentially burning down our kitchen is inexcusable regardless of age. Time for a range hood and a small countertop model. A non-GE model.

Ease of use, intuitive and good looking. Compliments my existing kitchen appliances and decor. I have a GE profile and has lasted now for about 6 years. I really don’t have any issues with the microwave and never needed any kind of service on it.

I love the way the dishwasher is so quiet and cleans the dishes well. However, they are ALWAYS WET. A repairman came and told me that I could not expect the dishes to be dry on the light cycle with the POWER DRY. He told me I have to wash on the normal cycle. I did that and they are still wet. He came back out again and basically had no viable explanation. I have to have a dish towel in hand to dry the dishes as they come out of the dishwasher. I paid a lot of money for what I consider the piece of junk that is sitting in my kitchen. I will never again buy a GE PRODUCT.

Purchased this dishwasher March of 2015. We have had at least five service calls because it does not clean the dishes. Glasses with just water in them when they went in the dishwasher come out dirtier than they went in. Residue is worse on the glasses, but other dishes are not getting completely cleaned. Forget it if something is stuck on, if you dont prewash, you are washing them again. GE has replaced numerous pieces, blamed our water was too hard until they found out we had a water softener and water system and then blamed that instead. We have changed soaps (five different brands), tried every setting in multiple ways, turned off the water system and just had the water softener run, turned everything off and nothing improves the quality of the clean. GE has even refused to pay the service technicians that they GE sent out to repair the dishwasher. Now we cant get anyone to come look at it because they are afraid they wont get paid. We have had three dishwashers prior to this one and have never had an issue with the dishes coming clean. We have maintained that there is not enough water pressure to rinse the dishes, but they are adamant this is not the case. Regardless, the dishes are still not coming clean. All we want is for it to be fixed, replaced or our money refunded. GE customer service is terrible.

Bought all new General Electric Appliances in 2002. Dishwasher, Washing Machine, and Dryer replaced after 6 years. Handle on Advantium Microwave replaced twice at the cost of $50 for handle made of plastic? Today our house smelled like burning plastic which upon inspecting dishwasher, found the heating element was COOKING everything in dishwasher. Got so hot that is melted the silverware bin and anything plastic in dishwasher. Glad we were home to unplug unit which we could not reset the controller on door of unit. Consumer Product Safety Commission is aware of this incident and is VERY common complaint with this Manufacturer. I have been on hold for 30 minutes with GE consumer relations phone number 1-800-386-1215. Was told by automatic system wait time was going to be 5 minutes. Figured I would write complaint on here as well while holding...READ CONSUMER REPORTS and stay away for General Electric Products!!! Model Number is PDWF480P00SS. Serial number is GS734641B.

This unit was purchased at Lowes on 11/22/16 and installed by our plumber shortly thereafter. Its not even 6 months old! It was poor at drying at first and then stopped drying altogether about a month ago. The GE Customer Service has sent a repairman here on 4 occasions in the past few weeks, sent faulty parts, including an element and a board (Im guessing that they mean a motherboard) but it is still swimming in water. Ive asked them to replace the dishwasher, to which they have refused. Yes we are irate, and rightly so. Whatever happened to quality manufacturing and decent customer service? I will never buy another GE product again. There should be lemon laws for appliances.Now we are being informed that the parts are back ordered until September, but that they might be able to get them from California on or about the 25th. Their apologies mean nothing when they do not back it up by amending the situation in an appropriate manner. By the way it takes 256 minutes for a full cycle. The plus side is that it is very quiet, but Im not sure how energy efficient a dishwasher can be that runs that blasted long. It doesnt clean very well either. If considering the dishwasher or another appliance, stay away from GE Is our recommendation.

We did not choose our dishwasher. It was installed by the builder but its served us well for the last 3 years. Its good quality and cleans the dishes well. It is also relatively quiet while its washing.

It is so quiet. I have to put my ear to the door to make sure it is running. Its the quietest dishwasher I have ever owned. It is a GE Monogram. I feel it is a little small on the inside capacity but I love how quiet it is.

We bought all new GE Cafe kitchen appliances when we remodeled our kitchen 3 years ago. The first Cafe dishwasher needed repairs in the first 3 months, and was replaced within 10 months due to continuing problems. The replacement GE Cafe dishwasher was deemed non-repairable after 2.5 years. The unit has a design flaw and the bracket holding the top water sprayer broke. The extended warranty with Assurant will not cover the dishwasher because they say it is not a working part. We are trying to get GE Customer Care to help but after three weeks the message we are getting is they do not care at all.The front burner on the cooktop will not light. GE cannot get a replacement part so the cooktop was also deemed nonrepairable after only 3 year. Our Cafe refrigerator also has a design flaw. The refrigerator must be unplugged to reset the computer when the water filter is changed. If you dont the refrigerator does not recognize the filter and will not dispense water. Needless to say I will never buy GE again. It is sad to see what was a good company go down the tubes.

The GE dishwasher does a good job of cleaning the dishes however we have had to replace the door gasket on 2 occasions because of door leaks caused by the bottom tray catching on the gasket when pulling the tray out to load dishes and it pull the gasket off the door.