Microwave counter top - On Oct. 15, 2010, I purchased JES1460 DNWW at Pacific Sales San Jose. Since then, two service calls on this microwave which replaced one that did not work. New sensor on service call 10-10-11. Today is 3-6-12, strong electrical smell practically knocks you out. I unplugged the unit. We always purchase GE appliances. No more, very poor quality. We are upset.

I purchased a Ge profile top of the line microwave installed over an electric oven. After 3 months the plastic handle came off and Ge replaced the entire door. This handle has now come off 3 times. The service tech said it has a plastic connector that weakens over a stove. It supposed to be mounted over a stove. This is just poor design and totally unacceptable for their top of the line microwave.

I just dont know how to start to show how disappointed and upset Im about this Microwave. I know GE is good brand but this Microwave must be the worst. I bought this microwave between July or August in 2016. Unfortunately, I lost the receipt. I bought a cash at Home Depot in my area, because I bought it cash Home Depot unable to find a record of but they remembered I did buy there between that time. I know bought that time because I bought my house in July 20116. This microwave started giving problems since June 2017. When I call GE they told me, they cant help because I dont a receipt, and they told from their record, this microwave was purchase in January 2015, they didnt want to believe that I purchased it in 2016.They charged over $100 to have a technician to come, he has to order a part that cost as well over $100, when the part comes another technician came. It was the wrong part. He had to order another part. The technician came back and Microwave work for only 1 or 2 months and stop working. Its been very stressful with this Microwave. This microwave was the most expensive, I bought over $500-600. Even though from your record you said I bought it in 2015, it still unfair, no one expect to buy something that expensive and break down that fast. I dont what to do. Im just so frustrated about the whole situation. This microwave cost me about $ 1,000 now from price to repair, and yet still not working. I wish someone reply to me and help me, if no one help I never wish to buy a GE product. So Sad GE, I need HELP.

Had 2 G.E. microwaves make a loud popping sound (like a boom) while turned off and then they started smoking like crazy. 1 model #JVM1630BB004/ serial#MA9713685. The previous microwave was just thrown away. I didnt realize there was a problem with these G.E. microwaves, so I dont have the other model/serial #s. These are a real danger.

Our microwave was manufactured in September 2010 and we purchased it in October 2010. It has been used a few times a week for reheating leftovers. I have owned secondhand microwaves and unknown brand microwaves, and they have been more reliable than the GE Profile. My husband and I invested in the Profile series when we remodeled our kitchen. After a lifetime of moving and living in homes with much to be desired kitchens, we decided to spend money to provide ourselves with a functional kitchen. If I had to do it all over again, I would have saved myself the trouble and purchased my appliances from another company.After having to call GE to send out a repair person 5 different times to work in our microwave oven, we are left with a nonworking microwave oven. It seems that a company that has made record profits from their faithful American fans could do the right thing and replace the microwave oven with something that works. Perhaps they do not have such a product. They have offered to let us buy a new one at a big discount, but they have not clarified what the percentage will be. The problem I have with this is that spending one more dollar on a product with no backing from the company it came from would be asking for more let down. I believe Ill have this lemon removed and quit before I take on any more consumer letdowns.

The GE microwave installed in my new home caught fire on its own. It is less than 3 years old. GE Consumer Relations Department refuses to replace it for free even when it caused a fire accident on its own. GE microwave failed in its safety standards. GE also has failed in its Consumer Relations. I will not trust GE brand again.

I purchased the micro from Sears. This is the replacement for one that was provided by the builder. The G.E. now needs replacement. Will work for limited periods of time. I have used it more than my stove to cook chicken, beef and whole meals. I will be replacing it with a new G.E.. The current one has lasted more 10 years with very heavy use.

We purchased a GE Profile Dishwasher from PC Richards & Sons in 2012. We purchased the extended warranty. The top of the door started to rust on left side within the first year. Death in family and called just after warranty ran out. The rust turned into a little hole. Door replacement was no longer available when I emailed GE directly this year. GE Representative sent me a $50 rebate to use to buy another GE. The dishwasher works wonderfully but appearance is awful. I will never buy another GE appliance.

GE Profile dishwasher - model # PWD8280N00SS - Appears that moisture got between the exterior panel and door that houses that main board. Because of the moisture caused a short that melted the main board, with harness and the ribbon from the on/off panel that connects into the main board. Luckily I was home at the time or this could have caused a significant fire damage in my kitchen.

My experience with GE over range microwave oven (built in) as follows/ Unit Mod.JVM3160RF3SS. Ser.#GG248367A, this unit was produced April 2016. Review February 28, 2019, unit began to disconnect itself during normal use. This was done by way of throwing 15 amp breaker. New home with dedicated circuit = Yes. Online Problem shows indoor sensors interlocks not adjusted properly. Troubleshoot fee minimum $99 with parts estimate $250.00. We have been limping along for two months with frequent trips to basement resetting breaker, now the breaker trips when activated. Same thing happens on multiple circuits, via extension cord trial. Next step purchase NEW MICROWAVE that is not GE.

Our builder installed our GE microwave Model: JVM7195SF1SS as part of our kitchen appliances. It worked fine for about 3 1/2 years. Then it stopped heating. It turns on and appears to work, but after inserting a cup of cold water and running it on high 10 minutes, we remove cold water. I looked into this and found that the magnetron (spelling?) tends to fail. Apparently, its a known issue, based on the reviews. GE wont allow consumers to replace this and doesnt provide replacement parts. Getting it professionally repaired will cost more than the microwave is worth. GE sent me a certificate for $150 to replace it, but it will cost at least twice that to purchase a new unit and get it installed. Plus, we have to buy another GE. I dont want to end up in the same situation. So we didnt use the certificate.

I purchased this in Feb. 2013. Just before the 1 year warranty was up the control panel went out. They came and replaced it. Now just a little over a year of the replacement, the control panel went out again. Worst microwave hood fan Ive ever had.

I purchased a GE microwave and had 3 different problem with it. They sent a service man out and he could not fix the problems. Now GE said they are closing the case even though they know I do not feel the problem has been fix. My other GE microwave, I really liked until it stopped working around 8 yrs old. This one is a piece of junk. It is an over the stove microwave so I cannot just take it back to the store. I would say GE has really gone downhill over the yrs. This will be the last GE product I ever buy.

I recently purchased a GDT696SSFSS Serial #SWGF800933C GE dishwasher. From the moment I tried to use it there was a leaking water to the floor from the back wall. I contacted the store that referred me to GE stating that their role ended when we received the dishwasher (long story..). I called GE service and when they came the technician said needs seal mat and offered to repair (the dishwasher has been installed in the garage since the water that comes out flood the kitchen floor and we cant afford having the floor damaged). But I had no faith whatsoever in this dishwasher (I was told if the problem happen again and damage my floor they will only offer to repair the dishwasher and I have to go to the insurance to repair my floor) or GE and said I wanted my money back. They did not even offered a replacement. It is still a brand new machine, I never use it.

About a year and a half ago, I bought a GE Profile dishwasher from a very reputable local dealer. Within 3 months, the digital control panel failed. Because it was still under warranty, the dealer replaced the panel. It failed again. This time they made other adjustments, it continued to fail. Finally GE suggested that the dealer replace the entire door panel, which they did. It took the repairman a couple of hours to do so. Still didnt work. Finally GE declared the machine non repairable and replaced it. Unfortunately the men who replaced the dishwasher didnt install quite correctly because it leaks. I keep a plastic container under the front left corner to collect the water every time the dishwasher runs.But the story doesnt end there. This machine and the first one both include a sensor that apparently check for objects that obstruct the spray arms. I dont know because theres nothing that tells me why the machine is beeping when I attempt to start it. I check the spray arms, move dishes, try to start it again and still get the beeper. I have done this over and over and over again and still it beeps. I have essentially emptied the dishwasher and it still beeps. When it does run, I have to use the boost temp. option and the longest cycle available to get dishes, and I mean dishes, even passably clean. Forget pots and pans, or casseroles. So, if you own a GE dishwasher, I hope that you have the old fashioned dishpan and dryer rack handy. Bottom line, it doesnt clean well, leaks, and beeps every single time I try to start it. Buy something else.

I have a General Electric HVM1540DN1WW over the stove microwave that I have had. This month will be a year and a half. The oven stopped heating so being a DIY person, I pulled the oven out and took it to my workshop to see if it was something I could repair. Inside the front panel was a very helpful schematic of the whole oven. Using the troubleshooting step listed on the paper, I found that the Magnetron tube had gone out. So I went to my owners manual and found that the tube had a four-year warranty on it so I called General Electric consumer relations to have the part replaced. First I had to fight with them because they said it was only covered for a year. After about an hour and a half on the phone and giving her the publication number on the manual, she agreed that it was indeed covered for four years. So she said that she would replace the part and she would even send a technician out to install it at no charge. I was very happy at this point. She said that she would ship the part to me next day with UPS and the tech would be out the following day to replace it. So far so good, till the next day when the part did not arrive. I called back in to General Electric consumer relations and spoke with a man this time and he told me that she had canceled the order that is why I did not receive it, and he couldnt see why. So he looked at the comments she had made the day before and did see that she said she would replace it and send a tech. The tech was supposed to be here the next day and I had no part for him to install. The man said he would place the order and have it shipped to me by the next day no later than 10 a.m. and the tech would be here between 1 to 5 p.m. Great! Until the next day and again no part when they said it would be there. Again with the call only to find out that it was scheduled to arrive next day guaranteed by 7 p.m. The tech is supposed to be there with in the next few hours and I wouldnt have the part. I called Fed-Ex and sweet-talked the lady into getting a hold of her driver to see if she could get to me ASAP. Bingo, next thing you know I have the part, the tech calls and the part is replaced. Oh boy, the big gaping hole above my stove is finally going to be filled once again. (I promise I am coming to the end.) After reinstalling the oven, I found out that it was taking longer to heat than when I got it, and it has a brand new Magnetron in it.Again with the call to General Electric consumer relations to set up another tech to come out and check it out. So the following day, the same tech arrives and puts a cup of just barely cool water in it and puts it in for 30 seconds, pulls the water out and says it is working just like it is supposed to and leaves. Well, again I called General Electric consumer relations to let them know what has transpired, but this time I asked to speak with someone higher up the food chain. I then spoke to a lady and she said that she would set up another tech to come out and check it out, and if it resulted in the same way that she would replace the unit with a new one. The following day, the same tech calls me and said that the oven is working the best that it could so I should call back to consumer relations as he did and set it up for a new one to be sent in its place. So I called once again and was not able to speak with the same lady and the only thing she could do is send me a voucher for $250 laying around for a new oven, but I would have to purchase one and send the voucher in with the receipt to get a refund. I told her that I did not have a spare $250 dollars around to go buy a new oven and then wait for the refund to get to me. So I asked that she have the lady that said she would replace it to call me back to straighten this problem out. Finally the following week, the lady calls me back and said, This is the best that I can do, due to me voiding the warranty. I asked, What? She said that the tech that spoke with me said that because I had hard wired in the unit to the house wiring, it was receiving low voltage so she couldnt do any better than that. I told her that was the most asinine comment I have ever heard coming from a field tech and asked her whether he went to a school backyard Techs-r-Us. I asked if she would have the tech call me to explain. I also gave her some friendly advice that she should not use that comment to anyone else for fear of someone laughing at her. We agreed to have the voucher sent if that was the best she could do. I will not buy another GE appliance again! I have purposely not mentioned anyones name because it was the experience, not the person that I spoke with.

This GE CVM2072SM1SS Microwave (over-range model) worked fine for five years. Then, we discovered the plastic film over the touchscreen starting to peel. After a bit of wrangling with Consumer Relations, they sent me a replacement touchscreen. The LCD didnt display properly, so they sent me another one. It worked for three months, then in the middle of programming to reheat some food, we got the following error message: Control Fault, Shorted touchscreen - F10. The control has detected a shorted touchscreen and has shut off the oven. It may still be possible to use the oven. However, if this message continues to appear, your oven will require service.The only way to clear the message was to unplug the unit. No amount of replugging in cleared the message. I called GE and they said they would replace the entire unit with a new model under some program they had. Sounded fine to me. I left the house. When I returned, I received a message that their representative called back to say they would not replace the unit, since the program had expired. Huh? I called again, and after a bunch more wrangling, they agreed to send a service tech out and replace whatever needed replacing or fixing at no charge. Of course, they never really made a notation of that, so when he got here, he had to get on the phone and sort it out. Finally, he replaced the touchscreen. Lets see how long it lasts this time.

A GE water heater was installed in our new home in 1962. As of today, November 2, 2014, we are pleased to let you know it is still in excellent working condition 52 years later... Way to go GE... The only update we changed lower element twice in 52 years!!!

Bought a new home. GE appliances came with our purchase so it was not our choice. Dishwasher leaked and ruined our wall. Service would not bring us a new dishwasher, they wanted to repair a brand new dishwasher that has multiple problems and damaged our new home. The service guy was such an ASS! Im in my late 30s and this guy was in his 50s and he was acting like one of the mean girls. The dirty looks he gave me! Wow. He said he fixed it, and Im actually running it now. We will see what happens. What junk! I know its going to leak again when we put the new wall in. Especially after reading these reviews!

Does not hold as many dishes, pots and pan as my previous dishwasher. In the bottom rack I cannot place plates and bowls side by side. Rack is too small and the gray interior is too dark. And the top rack does not hold the glasses in place, already had one break.

I purchased a new GE washing machine, and a new GE dishwasher, less than 5 years ago. The washing machine started leaking suddenly, and the repairman stated it was due to a cracked basket. They stated this was very rare, but the warranty had expired. The repairs would cost as much as a new machine. The dishwasher stopped draining water. A repairman advised there were two pumps, and one or both may be out. Estimates to repair the unit were only slightly less than the cost of a new unit.I will never again purchase GE appliances. I believe the life of a home appliance should be longer than 5 years. The cheap units I bought in my younger years lasted 20 years, without any problems. The GE units are not quality machines, and repair costs are outrageous. Nice way to try and convince appliance owners to just go buy new units. I can guarantee, I will not buy GE products ever again.

We bought this dishwasher, with third rack and steel tub, after extensively reading reviews online. We went through Home Depot and had to wait a month for the dishwasher to be delivered. We have had it just over a month now and not only does it fail to get all of the dishes completely clean (even when run on heavy cycle) it NEVER dries even with the dry boost on. We never overload it or load it incorrectly and still there are dishes and utensils with food residue after its done running which takes hours. I predict it will rust out in about five years (planned obsolescence). The only feature Im happy with is that it is nearly silent. Not hearing it run helps to not remind me how much money we wasted.

I have a microwave that has a rack inside which gives you options other than using the rotating plate inside. Overall it works quite well. I did not purchase this microwave, it came with the apartment. Not sure if I would purchase this brand if I were to buy it for my own home.

We purchased the entire line of slate/GE/Adora appliances from Home Depot 11 months ago. The fridge has required a service call for a VERY loud freezer. The microwave is fine. The stove/oven is fine. The dishwasher is a GIGANTIC piece of junk! 4 service calls and its still clunking, tapping, grinding and just extremely loud. VERY DISAPPOINTED!! We can only run it at night because of all the racket. The layout of the sections for dishes makes it totally useless inside. It doesnt clean. Soap residue is everywhere. My old DW was quieter and more efficient. *Insert sad face here.*

This review is of a low end dishwasher with simple controls. It has a plastic tub. The racks seem poorly designed. Bowls are hard to fit in. It cleans competently if it has hot water when it starts and a high quality detergent. Its basic and does the job. Pretty quiet too.

I have two of these in my kitchen, just about 3 years old. They have NEVER dried the dishes and I have ALWAYS had to thoroughly wash the dishes because otherwise they dont get clean. One has completely quit working now.

I purchased a GE Spacemaker microwave in Jan. 2001. Shortly thereafter, the frame around the door cracked, becoming worse until in Oct 2006 I complained to GE. They sent a $75 credit towards another GE. I purchased another GE in Oct 2006. After a while, the handle became loose. Today, the handle broke off at the base where it attaches to the door, rendering the oven unusable. I dont have kids. This appliance was not abused. I see in looking through the comments that other consumers have had similar problems which would suggest a product defect. My next microwave will not be a GE.

GE profile microwave magnetron burned out after 2 years. Part is supposed to be under warranty, but repair is not. There are no service centers in my area. GE wont just send me the part, or let me send them my old part.

From these posts, Ive seen people saying that they couldnt trust GE American-made anymore. Our microwave oven was made in Malaysia, but GEs home office appears to be in Louisville, Kentucky. Our problem: peeling paint on the door and upper part of our 2009 GE #JES1451DN1WW oven. As a cancer survivor of 8 years, my antenna goes up with any defaults such as this. On a common sense scale this should never be happening. I was very sad to see no recalls on these items Ive been reading about and am frankly scared to use this microwave. Shame on you, GE.

I purchased my GE Microwave about a year and a half ago. It has served me with flying colors till yesterday. To explain, I was boiling a small plastic pan of water for some rice. I have done this many times in the past. In the middle of the cooking cycle I heard a loud bang from the microwave. I stopped the cooking cycle and opened the door. To my surprise the glass turntable had shattered into several pieces. I cleaned out all the broken glass and tested the microwave. It seems to be working perfectly with the exception of the glass turntable. A new one was ordered. No further action is required. This is just an information for GE.

After my previous GE Microwave had paint peeling, I was offered a new one at a discounted price. The new one will not make popcorn. It does heat water, but a small bag of popcorn takes 4-1/2 minutes for 1/2 bag. I called and they sent a repairman. He made a bag of popcorn, told us to use a different setting. Tried that and it still didnt work. Then he heated a half cup of water and declared it works fine. It does heat. It just wont make popcorn. He said they changed the design due to people starting fires making microwave popcorn, but that could just be a easy lie. Said There is nothing we can do about it. Just dont make popcorn, eat chips instead. What???

When you use the vent fan it is very loud even in the low position. I would also like to see a brighter bulb under the microwave. I dont have much more to say except that the oven functions well otherwise.

I bought a brand new GE Spacesaver OTR mount Microwave (Model # jnm1851dmbb) and had installed in my new home by the appliance shop where I purchased it in November, 2010. I am a widow and I use the microwave maybe 3-4 times per week, and take very good care of it. I went to steam some fresh veggies this evening and the whole unit just went dead. There’s no fan, light, or keypad. It is plugged in and I did not blow a fuse or switch. I checked them all. It’s just plain broken after less than 2 years of very light use. It’s a piece of junk! I’ll be buying another brand this time. I will never buy a GE again! It’s a junk, junk and junk!

G.E. Spacemaker over the stove microwave. This is my second microwave of this type in 14 years. The first one lasted only 5 years. Im satisfied with the product albeit the price tag is too high.

I own a GE Model #JNM1731DM1CC that came with my condo, in March of 2008. After two weeks, the tray was spinning, and nothing was heating up. They came, and replaced something, and it worked again. It is now November of 2011, and the ** thing doesnt go off. When the timer stops, and you open the door, the table turns, and the microwave is on, letting rays come right out at you. I have to unplug it after every use, so that I dont expose myself to rays coming from the microwave. I spoke with several appliance repair shops, and they told me that it is probably the circuit board, and that to repair it would run at least $200. I am so disgusted with GE. I also have a stove that practically blew up, when the door shattered, after only having it for six months. They had to come and replace the whole glass front. I doubt very much, if they will help me, because it took at least 12 calls to get them to replace the glass door, with the glass all over the place, and inside the oven, four days before Easter dinner at my house.

This washer was easy to install myself, and has worked perfectly. Stainless steel insides. Very happy. You put a pod in, turn it on, cleans great. We do not even have to use heating element. Dishes dry quickly on their own. 24-inch wide. Bought to fit the new kitchen cabinets. Nice brushed stainless outside. Cleans easy with towel and hot water. Silverware container picks up to take to storage areas. No problems at all.

GLDT696 series dishwasher - I have put up with my GE appliances and their problems for years, but now I will throw in the towel. Our Contractor appliances were replaced 5 years ago when remodeling the kitchen. Ten years of no problems with cheap stuff replaced with Stainless Steel GE ovens, fridge, microwave and dishwasher. I will only mention the dishwasher in this posting. Bottom line... Wish I went with another manufacturer. The washer has a gasket that loves to fall out of place creating leaks or floods. The pump has failed after the one year warranty. The control board has been replaced twice and today it looks like there will be a third one. That is if I am stupid enough to hold on to this piece of junk. If I buy another manufacturers steel front dishwasher it will not match the other appliances. At this point I dont care. Unlikely to ever buy a GE appliance again.

We have never had a problem with the microwave. Most of our use has been heating things up. There has been a few times that our granddaughter made something else. It is lightweight. Easy to clean. Not too large or small. Fits what we use it for perfectly. Doesnt take up much room. It heats perfectly. It has been a really good microwave.

We have had multiple service calls where the tech explains immediately that he knows what the problem is, where there is a very loud buzzing noise as if you were going to be shocked by the microwave if you touch it while it is running. Now after fixing this problem multiple times, having the display burn out, etc. tonight we find out the microwave is actually turning ON when you open the door! This is a severe safety hazard! The interlock is doing exactly the opposite of what it is supposed to do!

We purchased a complete kitchen of Profile appliances. Everything is fine except dishwasher! The first one didnt clean food and left scum on everything... The company sent service several times replacing many parts.... finally gave us a new one... It still doesnt clean. It will not remove peanut butter, avocado, and my teacups are perpetually stained dark brown. My old dishwasher, Kenmore, left my dishes sparkling... no matter what was on them, plus I didnt have to run my kitchen sink to get hot water first! I will not use GE in my next house which will be built in about 3-4 years.

I love the GE. I bought a GE dual fuel range about 3 years ago when my 6 yr old Frigidaire stove caught fire. Always wanted to cook with gas but have electric oven and broiler. It's also easy to clean the cooktop unlike older gas stoves. Love the big fast boiler eye.

Has anyone experienced a plastic burning smell when the dishes are drying? My dishwasher is 3 years old and I wash on Light cycle which is suppose to be 45 minutes long but goes for 85 minutes. Company said to turn off circuit breaker and turn back on and it should be fine, it isnt. Last two times I used the dishwasher it wouldnt completely shut down so I had to do it manually and before I did this I could smell a plastic burning smell but there was nothing on the elements. I called for a service call but they were shut down for 4 days.

I purchased a slate dishwasher in Oct, 2014. After the third cycle the soap would not dispense (door would not open) or the soap dribbled out and remained running down the door. I had to run the cycle twice to get the dishes clean and for the soap to dissolve. I called the store at which it was purchased. A tech came out and replaced a part. Did not work. After the second time, when the tech said nothing was wrong, even though he saw the soap running down the front door, I called GE. They sent a tech from a different store. After the eighth repair I told them I wanted it replaced. They had already replaced the soap dispenser twice, the control board and even told me to move the baskets (ridiculous). They also suggested I run hot water before the cycle! They said if it was repairable they could not replace it.We went back and forth with this and they finally agreed to replace it. Got the new slate dishwasher in July, 2015. After two cycles I started having the exact same issues! I will not deal with GE or ever buy another of their appliances. I will tell everyone I know not to deal with this company. Quality is terrible and service was extremely frustrating, having to take off work numerous times and wait hours for the service person. In the end, it never worked!

I rarely use it. I know to avoid too close to the signals produced in the microwave and use it only about once a month.

I purchased all GE Profile & Café appliances when we remodeled our kitchen in 2012. The DW has never cleaned well. I have contacted GE through email several times and now I have to handwash all of the silverware and re-wash most of the dishes. At times, glasses and silverware come out worse than when they went in. We have checked the water temp, pipe size. We use recommended detergent and finish rinse. We had a service call from a reputable appliance repair person, we purchased the recommended citric acid and performed the recommended protocol. This thing stinks! GE recommended another service call. I had a 20+ year old KitchenAid prior to this and it worked like a champ! Never an issue. I am ready to toss it out and buy something else (but it wont match!). Any suggestions?!!

I purchased a GE over-the-range microwave, GE Profile **, on 2/22/2005 as part of a kitchen renovation. I also purchased the GE Profile dual-fuel range, **, and the Profile ** refrigerator at the same time.I am now having to replace the over-the-range microwave as the interior enamel is chipping off in chunks rather than the discreet amounts in the beginning. The dual fuel range burst into flames and was replaced 3 years ago (the line was eventually recalled). The tracks that support the drawers in the refrigerator are breaking off slowly but surely, meaning they will not be useable shortly. I would not take a GE appliance as a gift.

Our $599 GE dishwasher of 3 years is literally falling apart. We have a GE Slate Colored Stainless Steel Interior Dishwasher (GDT580SMFES) and over the past two weeks, the water stopped heating and 2 seals in the dishwasher started disintegrating. If you touch the seals (the main gasket at the bottom of the dishwasher and the main seal that keeps water from leaking outside of the dishwasher), parts of the seals come off on your fingers. We bought our dishwasher through Lowes with the extended protection plan and were having a hell of a time getting it fixed... Every time we call to make an appointment, its a minimum of 15 minutes on hold and it takes FOREVER for the new part to arrive/get the new part installed (almost 3 weeks now). So disappointed in our appliance and in Lowes for selling us such a lousy extended warranty. Never again!

GE is the only manufacturer who still makes an under cabinet size microwave and therefore I use this product. I renovated my kitchen 14 years ago and on my second microwave. It is small, but does do its job, but when I work with a larger microwave I realize how different it is due to its size and less powerful.

I recently purchased a GE Profile 1.9 microwave oven from Home Depot less than a year ago. Last week I went to remove something that I had cooked and went to close the door and it would not stay shut. I ended up getting some masking tape to try and tape it shut in order to keep the light from staying on and burning out until morning when I could get a better look at it, thinking that it had to be something small that could be taken care of without any problem. Hinge adjustment, something getting in the way that I couldnt see, etc, etc. Wrong! I have been over this door with a fine tooth comb and there is nothing that I can see that is preventing it from staying closed, not only that but according to everything that I have read, I am very lucky that I didnt get fried while trying to figure out if the latching mechanism was functioning correctly. I am not even going to go through the long drawn out process of dealing with GE over this due to the simple fact that I have been there done that with my dishwasher that showed up with the front panel dented a few years back from the factory and I ended up blaming the place that I had purchased it through instead of GE and have since found out by reading other complaints that this seems to be something that is not unusual when it comes to GE appliances. I spent over 1100.00 dollars on the dishwasher and they only replaced the panel instead of giving me a new one, and I have never been satisfied with the way that it operates, and it was a very long and drawn out process and I am just not willing to spend the time again on another one of their products. It is unfortunate that we have entered a time where customer satisfaction means nothing, and the days of caring about having repeat business from a satisfied customer are over. The prices continue to rise on the things that we have become to depend on and cant seem to live without, but the quality and workmanship have not only diminished but also present safety threats. I will never purchase another GE anything and I am looking forward to the day when we all have finally had enough of this and do something that makes these companies stand behind the products that they sell and quits ripping the consumer off. Its rampant across the board no matter what you buy, and there should be laws in place in order to keep it from happening. We have laws for everything else, why not have a couple that protect the consumer and their pocket books.

We have an overhead microwave that fits nicely into the spot. The power level seems to have dropped off, but this is after more than 8 years with lots of daily usage.

We purchased a new General Electric (GE) Adora microwave model DVM1850SM4SS from Home Depot for approximately $355.00 in 2010. It was manufactured in Malaysia and had been in use for 2 years and 9 months before the magnetron failed. I spoke with a GE Customer Care representative on two occasions, and she said that the best that GE could do was split the cost of parts and labor since the 1 year warranty had expired. We had not purchased the extended warranty believing at the time that a microwave generally lasts for many years, and GE had always made quality products and would stand behind them. I indicated that I wanted to have the problem properly diagnosed by the service rep recommended by GE before proceeding further. The 10-minute service call bill set us back approx. $100.00. It would cost at least another $170 to replace the magnetron if we used the service tech contracted by GE. For $270, I believe we could find a fairly nice new microwave. I looked at alternative options for repair or replacement, since I am rather partial to the looks of the over the range stainless steel Adora. The model we have is no longer manufactured, but GE now offers the 1.9 cu. ft. Adora that Home Depot sells for around $400.00. In my internet research, I noted several postings that indicated that due to the high voltage danger of the magnetron, only trained technicians should attempt repairs. After half a dozen calls, I fortunately learned of a Microwave Service Center close to our residence that could replace the magnetron. After taking it down from above the range, hauling it in for repair and paying the approx. $104.00 bill and hauling it back to our residence to mount on the wall, we have a microwave that should work for a while! Total cost including service call for diagnosis - $204.00. Considering that GE does not wish to stand behind the quality of their products, I would not be likely to purchase a GE product again.

Microwave Model HVM1540LP1CS... This microwave was installed 6 years ago when I built my home. I live by myself and the microwave has only been used by me. I loved this microwave until suddenly it began to turn on by itself and I would often hear popping noises. I looked up reviews of this GE microwave and found that this is a frequent problem with GE microwaves. Fires were reported in a couple of reviews so I immediately unplugged mine, as a safety precaution. If this happens frequently with these microwaves, why isnt GE replacing the parts for the defective machines since they can be fire hazards?

My dishwasher came with the home when we purchased it, and we did not see any good reason to replace it. It is a standard model, with a nice stainless steel interior. We have had no problems with it and plan to use it until it fails. I would like to have the upgrade model in a new home. This one does a good job washing the dishes.

GE has agreed to replace and install my microwave. I am very satisfied that they understood my concern in this situation and agreed to my request.

July 4th, 2010 - GE Profile Dishwasher, Model: PDW9200N00BB, Dishwasher had been humming after cycle was over for a little while, this night I walk into the kitchen late and find it full of smoke. Circuit board has a hole burned though it and wiring harness is melted. Never tripped any safety, could close the door and it would come right back on, smoke and all. This model was not on the recall list but I called GE anyway. After describing the fire they send someone out, then they send a new dishwasher out and install it. I assume they wanted the old one to look over or just to get rid of it. New washer installed the end of July 2010, new model number PDWT500R10BB. Today is 2012-02-02 and the new machine would not stop at end of cycle (Got down to 1 minute and stay there for at least 20 minutes before we turned it off). This machine is now making the continuous hum after the cycle stops that the old one did before it caught on fire.Called GE, they said they could maybe go half on parts and service until they checked where I was located. (Wichita, KS. Area population 500,000+) They said that they didnt send factory techs to my area and I would need to contact a local repair service. I pointed out that they had a factory guy for when my machine was on fire and they said it was just a malfunction now, so they could not. No half on the price for repair either at this point. This is a $1100 to $1200 dishwasher with, as near as I can tell from complaints online, a history of going up in flames. I understand things break etc, but when you continue to put out products like this and then refuse to remedy the problem, I and anyone who will listened to me will never own anything GE again.

PDT845SMJES - I purchased the entire GE Profile series when we remodeled our kitchen in October 2016. The first time I started the dishwasher, it leaked out the bottom of the door. The store where I purchased it sent out a plumber who discovered the soap dispenser was missing the seal. Took a week to order and replace the seal. Worked fine for 5 weeks. Then, on December 17, 2016, it quit mid cycle and I got the leak detected error message. Now I am in dishwasher hell. The store where I bought it said they were too busy to come and check it, so they told me to call GEs customer service number. GE sent out a plumber from Iowa (I live in SD). He removed the bottom panel, to look underneath and decided it needed a new pump and also a new soap dispenser part. That was on back order, so I had to wait until January 11, 2017 for him to come back. When he pulled out the dishwasher to replace the pump, he discovered the tub was leaking along the left side. He said the unit could not be fixed and suggested I call the store where I originally purchased it. They agreed the unit could not be fixed and contacted GE and got me a case number and said GE would call me by the end of the week. Im still waiting for that call. Do NOT buy this model GE dishwasher. GE apparently doesnt stand behind its products and the stores that sell GE are helpless to do anything for you.

We purchased all GE Profile appliances when we built our house 4 years ago. The dishwasher, for the second time, has turned itself on and melted everything inside and got smoke in the house before we discovered it. I am afraid to have it repaired for fear that it will happen again when we’re not home or asleep. There seems to be a lot of people having this problem, yet I do not qualify for any recall that I can find. I am disjointed in GE to say the least.

I purchased a GE dishwasher model GSD2100v50BB on June 6, 2016. By March 9, 2017, a switch broke which caused the machine to be stuck in the wash cycle for over an hour before it was discovered. This caused soapy water to flow out of the machine all over the floor. It was fixed under warranty but by June 29, 2017 it broke again. It is no longer under warranty and it will cost $70 to 100 to fix it again. It was purchased at Home Depot and they state it is to be handled by GE. GE states that since a year has elapsed, they are not responsible for the repair.

GE Cafe Series dishwasher model # CDW9380N20SS is a fire hazard. Three days ago, our GE Cafe Series dishwasher nearly caused a fire. If I had not been home that day, it surely would have. I ran the dishwasher as usual and went about my day several hours later. I detected a strange acrid smell and with my five-year-old who was ill and at home that day, discovered the dishwasher door was burning hot to the touch. I needed a potholder to open the door. Once opened, there was a blast of heat and smoke. I needed to use oven mitts to protect my hands from the heat to pull the racks out and handle the dishes. The heating element did not deactivate at the end of the cycle.If I had not been at home, the house would have been destroyed as all the plastic items on the top rack in the dishwasher melted. In addition the plastic parts of the lower rack, the wheels and their clips; the silverware holder; covers; the clips that hold the pot tins in place were destroyed, to the point that the majority of our silverware was coated with plastic. The plastic on the lower water dispenser has been demolished; it completely melted more than 50% of the plastic covering on the arm and is charred and burned. We are so lucky to still have a home!The door must be kept open. When the door is closed, the element super heats and presents a major fire hazard. We have noticed that there is a recall for similar models with plastic tubs, but ours has a stainless tub. GE needs to broaden the recall to include all these models. This is a serious issue that needs to be addressed immediately. Our GE Cafe Series dishwasher model #CDW9380N20SS was installed on October 1, 2008. I would not be surprised to find that parts from the recall in April 2008 were also used in the Cafe Series. I have discovered in the few days since the DW units malfunction that there are over 1000 complaints listed with similar, even identical complaints, on multiple internet sites with the same problems.

At least 3 times, with different people in our household, our microwave has started on its own. It was plugged in but with no input from anyone. We checked the website and no recall. Microwave just out of warranty. This was a disaster in the making. We took it as a sign to discard this appliance. GE NO MORE!

GE profile microwave TOUCH SCREEN pvm2070sm4ss - Almost new. Used properly. Touch screen failure. TOUCH SCREEN does not function properly making it almost impossible to use the microwave. This Common Problem should be a RECALL.........

Two years ago, after owning a GE JVM1490 microwave-convection oven (over the stove) for three years, the door handle broke.Let me clarify that I worked for GE first as an engineer, later as manager, for 20 years including 6 in Major Appliances. I am ashamed of what I am reading how GE is treating customers today.I am perfectly capable of replacing the handle myself if I am provided the complete and correct assembly drawings and/or instructions. GE refused to provide me anything when I requested them. The scant drawings and instructions I found online are insufficient. As a matter of fact, the design is so poor that removing the internal bezel, which you must do to reach the handle fasteners, forces you to break the mounting tabs, requiring replacement of this part plus the handle. This was confirmed by the parts store I visited.However, even after removing the bezel, neither I nor another ex-GE appliance engineer could figure out the access to the fasteners. I have glued the handle three times using epoxy and Cyanoacrylate (super glue), but it has broken off a fourth time. I will figure out a way of fixing it before I pay GE close to $100 for both the handle and bezel. And if I replace the appliance, you can be sure it will not be GE.GE should be ashamed of the poor design and deplorable customer service they are giving now. How things have changed!My suggestion is that all with this problem post name and phone number of GE customer service personnel they spoke with.

Worst dishwasher ever. No matter all tried it just does NOT get all off dishes. Have to hand wash too! IS just not made to do the job. Just relying on GE reputation of the past! Made a mistake believing General Electric hype advertising. SAD.

We bought a new GE dishwasher 28 APR 2020. I noticed it wasnt working right about 5 months later. We are just over 1 month from the end of the warranty. The store where we bought it has been fantastic, but theyve been out 5 times to try to fix this sucker and they cant. GE told ME they would replace it if the store called to say they couldnt fix it, but when the store called, they refused. Theyre sending the repair guy out yet again one week before the warranty expires so he can call them and theyll talk about it while hes here. Ill never buy another GE appliance again.

This is one hell of a dish washing machine. You really need to think about getting in on this thing at the ground level. You put the dishes in dirty and they come clean! Holy**!

Bought a GE microwave and arranged to have it installed. Kept it in sealed box for 3 days until installer appointment. Opened box to find a crease (dent) in door. I phoned in to the GE warranty depot and they informed me that I only had 48 hours to report and as such was out of luck. They indicated that it is clearly stated in the Appliance Manual under the warranty section. Too bad that the Manual was in the sealed box. No warning on the outside of the box. On top of that the individual that I spoke to at the Warranty Depot was very rude. No more GE Appliances for me. Be forewarned.

This microwave is nearly 20 yrs old and is still working great. We replaced the handle but other than that it has been great. I would definitely recommend the GE brand as it has been very reliable. I give this product a great rating.

We bought a model PVM9215SK3SS microwave as part of an over-the-range microwave oven/extractor fan combo. Unlike every other microwave combo weve ever had in our frequent moves, this microwave cannot run the kitchen timer independently of the microwave. If you try to set the kitchen timer when the microwave is running, the cook-time changes and overcooks whats in the microwave. If you try to set the microwave to cook while the timer is timing a food cooking on the range, it simply refuses to work. The instructions are very hard to both find and then understand, having been written in China to cover many different models. Apparently I can ask my phone to turn it on. I sure cant manage that very often in person! The fan is too loud for comfortable use even at the lowest speed, which is a great disappointment. A former Profile model was very quiet at every speed, and much more efficient. Were saving up for something that works.

My GE dishwasher is 30 years old and has never had a service call. It has a built-in food grinder and my dishes almost always come out spotless. Standard size, upper rack, removable utensil basket. Almond with a dark faux instrument panel with rotary dial. It was a builders model. Works like a charm but very noisy. Even though Im a small family Ive tried to use it consistently to keep the seals lubricated. It has stayed really clean inside with just using the dishwasher detergent. Unit does have some kind of preheat Electrical for the dish water temperature. The new ones dont work so well so Im afraid to replace it.

We have a lower end GE stainless steel model that came with the purchase of our new build home. The washer is just average and does not have a huge capacity. For only 2 people in the house it gets the job done in general.

We bought 3 GE Profile appliances in 2005 when we renovated our kitchen. We have not had much problem with the gas oven/range/stove. We have, however, had nothing but problems with the microwave (which I submitted a separate review for) and the dishwasher. Recently, a friend made some suggestions regarding the dishwasher. I then went online and watched some tutorials on troubleshooting my dishwasher problems. I tried all the new suggestions and the dishwasher worked OK the one or two times after that and then back to all the old problems: 1. We have to scour every dish until its nearly clean before loading (even though the instructions specifically stated no pre-rinsing necessary). 2. I am not sure the soap cup opens. The soap is always left caked in the cup resulting in running the dishwasher twice. We have tried all kinds of various soaps and they all do the same thing. The eco-friendly soaps are the worst. We strive to be eco-friendly, but how can we be if we are using the harshest soaps possible AND running our dishwasher twice?! Not to mention the pre-rinse scour and running water until it is 120 degrees prior to running.3. The dishwasher also leaks and is very noisy.I have read some other reviews on this product and realize our dishes are not always dry at the end. This is a non-issue for me. I dont care so much if the dishes are dry. I do prefer for them to be clean. Dishes are a task I do not prefer to do. It would be nice to have a functioning helper. I am grateful the thing hasnt caught on fire. I saw that this dishwasher currently sells for $800-$1,500. I cannot believe it. I wouldnt spend $100 on this piece of junk.

Since 2010, our 2006 GE 1.1 cu. ft. countertop microwave oven model # JES1136WL has had power failure problems. It began in our previous home and now in our next home. All of a sudden, Id check the panel and it would say PF, which means power failure. So, Id reset the clock and there it is, ready for the next usage. Over a year later, in our new home, as of yesterday, it will start and immediately cut off. Now, weve been using this microwave in the same plug since May and now its October. So, what happened? Today, Im looking for the users manual and have located it online. But it appears that the PDF GE has for it, the Adobe document, has a problem. So, Im going to check it on my laptop, as this is my PC. Thank God we only paid under $100 for it. On some of these consumer complaint stories, the person paid a great deal for theirs.

Had to order filter separately. No one said anything about filter not included. So it holds up the whole installation process. So now we wait! Not Best Buys fault unless it is supposed to be mentioned. Last microwave we bought, filter was included, twelve years ago.

Of course, I rinse my dishes, but Ive had few incidences of dishes coming out dirty. Hot start, start (long wash), short wash, rinse only and plate warmer. The interior is set up well with a good variety of spaces. I would say its a normal-sized household dishwasher, not compact, with approximately a 24 width, 24 depth and height. White with gray lettering; four buttons and one dial. Simple design that is easy to understand and operate. The run-time of this dishwasher is quite long, and it is very loud.

I bought the GE profile dishwasher and refrigeratior 5 years ago. The dishwasher in the first year the mother board went out then had a problem with the motor and now has gone out again and had a repair come out and cant figure out why it doesnt work. the refrigerator has gone out 5 times, the most recent is 8/1/11 and always the same problem. When ever the humidity is high the frig freezes up and then it stops running. Im very disappointed in GE, Ill never again by another GE appliance.

We bought a brand new GE kitchen. We put all GE in the new kitchen. The hood/microwave/convection oven broke in 9 months. We had service out, and they wanted the same amount we paid for it to repair it. My husband is an engineer and he got it to limp along. Then in September, it broke and cracked up. All the control panel cracked and broke. It does not work. We called GE. They said to get a replacement. We went to Sears and bought a similar unit as the original has been discontinued. We were assured of a credit towards the new one. A credit would not be issued. Gary ** has continually called my home but not my cell. He reached me today in school, a Special Ed behavioral unit, and started yelling at me over the phone. He said that I did not provide serial numbers. I have many times. He said there is no record of my complaint. I have called, emailed and written at least 3 times providing all information. We just want a credit for the original unit. We have provided sales slips, etc. Please help.

Dishwasher works great, I just wish it was a little bigger. I usually have to work hard to get everything I have to wash into one load. But if I could give it a 4.75, I would, because dishes are spotless when I remove them.

My husband and I replaced all the appliances in our new home 4 years ago with GE Profile double oven, cooktop and built in microwave. All the appliances are of poor quality and do not cook the way we are accustomed to. But the microwave has had a particularly bad history. Within one year, it completely quit working and we had to replace several fuses and a board. Over the past couple of months, the keypad continually quits working and we have to climb up on a stool, unplug the microwave to reset it. Only then will it work for us to heat something. However, the keypad does not accurately reflect the task we are trying to use. I have had many microwaves over the years and I have NEVER had to repair one before. This particular brand of microwave was produced in Malaysia in July 2008. Very, very poor quality. No resolve from GE or from Sears where we bought it. I am done with GE and with SEARS.

Purchased a GE 650 dishwasher which we quickly discovered has terrible racking for North American dishware. Also the control panel is overly complicated yet limited to use (always flashes settings even when not in use). Once you figure out how to load dishes into the very tight/ narrow tines they fall over and chip/break. When investigating the dishwashers by GE made in China/Taiwan etc all have same issue. The ones made in USA by GE have wider and longer tines. We have had MANY dishwashers over the 40 years and NEVER had one as bad as this.When calling GE customer service the senior rep was not willing to offer any customer satisfaction as nothing technically was wrong. At one point she stated we had made the purchase so live with it even though it was the wrong choice. We offered to pay for any cost difference, etc. When questioned about GEs interest in customer satisfaction she stated that was not a warranty issue. She was not concerned about a satisfied customer. With that, we will not be purchasing another GE product or its affiliates. What a waste of money.

When we bought our house we upgraded our GE appliances to stainless steel. I had no problems with the dishwasher until a few days ago. Then it stopped working completely. As with most of the complaints I have read the control panel was not working. We took the front door apart just to see if the dishwasher was worth salvaging or should we buy a new one. A screw was NEVER installed on the vent assembly to hold it in place. The entire inside if the door was corroded by steam and/or water. So every wash slowly degrading the electronics. 18 months, 6 months past its warranty where now its out of their hands and you can pay $89 to have someone just look at it. We were lucky it just broke because this hidden mistake on their part could have not only caused a short circuit but a fire. Like so many of the other stories. I will not buy GE again.

Bought model DDT575SMFES less than a month ago (along with a new microwave, stove and fridge) from the Home Depot. When the appliances were delivered the stove had some flaws in it so it had to be replaced. The dishwasher is a whole other story. It worked fine for a week but now it takes forever to get it to turn on. We try and try but it just beeps and the light flashes. Once we do get it turned on to stops before completing the cycle. If it does run a full cycle the soap dispenser does not dispense the soap. I wish I would have looked at this site before purchasing these GE appliances. Total junk and will NEVER buy anything GE again if I can help it. No responses back from GE and from what I read dont expect much from them. Now we will not be able to match the Slate with another brand and are stuck here.

Our GE microwave stopped working after about 7 months of use. Ive never had a microwave break down on me before. Ive owned other brands which Ive used for years, actually lasted over 10 years. The only reason we purchased the GE microwave was because our old microwave was too big in size. I called GE for warranty service and it was very much of a hassle just to make the appointment. I had to call several times because a customer service representative misinformed me. It took a couple days just to set up a service appointment.Ive told the representative that the microwave stopped working and will not power back on again. The representative told me that the fuse probably went out. Something must have blown out. Finally, the appointment was made for about a week later, which was the earliest time available. It is so inconvenient not to have a working microwave even just for a day. Anyhow, the service tech came about two hours late. The scheduled time was for 8am-12 pm. He showed up close to 2pm. A family member was waiting at home all day because of this. Then the service tech told us that he needs to order a part for the microwave and that he will return a week later to repair the microwave.A week later, he didnt show up. No one even called. So I called back GE and found out that the appointment has been postponed! So now, we have been without a microwave for about three weeks. I think this is ridiculous. Im pretty sure that this is a common problem with GE microwaves and they already had an idea why the microwave wasnt working. It doesnt power-up! Now they are telling me that they dont have the part/s in stock? If I had known that we had to invest so much time and go through so much hassle from the get-go, I would have just purchased a new microwave three weeks ago. GE should pay me for all the time Ive wasted!

The one thing I would change on this model is a top rack sprayer. The rack sizes are nice. The bottom rack holds pots and pans well, but top rack dishes need a good pre rinse before washing.

My dishwasher is a GE Profile. It is as quiet as a Bosch we had in another home we had but it must cost half as much. We have it 8 years now- no problems. Never had a service call or anything wrong with it. It owes us nothing.

I bought a Moffat washer and dryer, and the timer came out of place and burnt on the inside. The timer clips in and if push too hard it will fall out or break the clip. We have extended warranty on it and due the repairman came out twice. The warranty person said it cost more for the repairman than the dryer worth - theres no more warranty. I think the dryer should replace when the timer fell out of place. This dryer should be called back.

Touch panel gets too hot from the stove and fails. Have to unplug it all the time to reset. Door handle unscrewed and inside coating is peeling. Had repaired three times. When least expected, I have to empty the cabinet above to reach the plug.

I purchased the GE Cafe dishwasher in March 2010. Starting in January 2012, some of the keypad options stopped working. Then in April 2012, the keypad stopped working completely and I could no longer get it to turn on. I did call GE for repair. When the repair person was out to fix it, they said that this model has a design flaw. It was originally designed to sit 1 below the countertop so that the heat could release without shorting out the keypad. However, that would require a person to somehow raise their entire counter or fit the dishwasher below the floor somehow. GE was aware of the problem but decided to ignore the problem. That means that even though my keypad was replaced, the same problem will occur again and again no matter how many times the keypad is replaced. I paid over $1400 for this model, and the labor charges alone cost me $200 for the repair. I think it is absolutely despicable that such a large company has allowed a high-priced, defective product to go out into the market, knowing that a major malfunction will occur out of warranty in such a short period of time.

Dishwasher has been running 3 hours and it still has not finished. It is the loudest dish washer I have ever owned and this is the 5th house I have owned. To top it off I just paid $270.00 for a GE professional to come to our house to troubleshoot our problems and it fix the issues. Guess what, problem not fixed and GE has my hard earned money. Thanks, GE.

My dishwasher is part of the recall due to fire hazards. Last week it began leaking. I found the leak which is a crack in the plastic basin right under the heating element. Is this connected? Dishwasher does a horrible job cleaning so I would never use the rebate to purchase a new one nor can I afford currently.

I have a GE Profile dishwasher that is only 1 1/2 years old and the control panel has stopped working 2 times. The first time, it’s under warranty and it repair took place for a couple of minutes. The second time, it’s not under warranty and they want to charge $89 just for the service call, parts and labor. Crazy. That’s a $1000-plus appliance that has already broken two times. I cant run the dishwasher on any setting except the one that it decides to choose for us. Yes, it changes whenever it feels like it. This was one of their higher end dishwashers and, to be honest, it really doesnt clean any better than a lower end one that I had at a previous home.

I bought a JVM3670SK05 a little under two years ago. It is an above the cooktop vent-a-hood microwave. I believed I was buying a quality unit. Now everything is working, but there’s no heat! Even the cheap units from Walmart work longer than this expensive piece of crap! Now I either have to spend enough to buy a new hood for cooktop and new microwave or pay the same price and buy parts in hope that they will not go out again. Not really feeling lucky with the GE product.

This is a work horse of a machine. I have been using it for 12+ years. Not my first choice, but it was here when I moved in. Still going strong. So why change now, when its doing its job. My first dishwasher choice would have been a Bosch, because they are so quiet.

18 Dishwasher Model GSM1860VSS - Cleans terrifically but I have a problem with either a leak or steam which is running the front of my dishwasher and marking it. It seems to be leaking from the black panel across the top. If I check inside behind the black panel I can see marks where water has been running. Please let me know how to fix this. The dishwasher was bought in 2015 and have the receipt from Home Depot. Thanks.

Clean neat appearance over stove. Fast consistent heating. Easy heating options. Turntable on or off. Also, love the stove top light. Cost a bit more than I thought it would, but not much more than others.

Microwave oven 2008 - The food doesnt go around anymore. The glass insert does not turn. What can I do?

My microwave (model#JES1139BL03 and serial#901897B) is peeling around rolling fixture that holds glass tray. I wipe it with hot water and it continues to peel off. Its almost all gone. Ive only had it two (2) years. This cant be normal. Anyone else have this happen?

Have to rinse dishes clean before I put them in. Otherwise they will not get clean. Does as well as most other dishwashers- until you get into the very upper end ones. The racks are good size. The outside is nice looking.

GE cafe dishwasher, model CDT725SSFOSS - Bought new home December 16, 2014. Dishwasher worked well for a short period of time. Six months into ownership the unit began to leak and was quickly and efficiently repaired while under warranty. 10 months into warranty, the dishwasher began to rumble very loudly during every drain cycle, to the point where it sounded like it was going to walk out of the kitchen. Warranty tech showed up and had to order parts. Not sure which pump to replace he ordered both. Tech returns 10 days later and replaces both pumps. He turns power back on and the entire unit is dead electrically. Nothing works, pumps, motors, keypad, nada! Repair keypad was ordered along with a new wiring harness, just in case it was the source of the problem.2 weeks later, and one week before warranty expires, the repairman shows up and replaces the keypad and wiring harness. Yippie skippie, everything works but the tech is still confused, telling me the keypad lights should turn off at the end of the cleaning cycle, he could never make that happen. He completes his repairs on December 23. The unit performs flawlessly for 3 complete cycles, except the lights on the keypad never turn off at the end of the cleaning cycles.Sometime during the week of January 11-17 (while I was traveling) the unit dies again. Completely inoperable electrically. Follow up call with GE warranty service and the entire focus is on the fact that the warranty has expired. I keep pressing and the warranty person finally admits that service parts should carry a 30 day warranty. Service tech arrives and tells me he has to order parts. Keypad has been back ordered and I have no idea when it will show up.Totally unreliable expensive piece of junk. I can only imagine what the future holds. This experience seems to mimic Jack Welchs business philosophy to a tee - maximize profit and return to the shareholders while minimizing production costs and ignoring the customer needs completely. Highly recommend that you run any direction except towards purchasing any GE appliance, especially the Cafe series. Dishwasher. Nonexistent quality controls, no parts available, disappointing performance, extremely high price, P.O.S! DO NOT PURCHASE GE APPLIANCES. Negative Stars rating is what I would give this product. It will for good recycle materials at the scrap yard, sooner than later I am afraid!

GE 1.6 cu ft over the range microwave. It performs well and has multiple options preprogrammed on keypad. The only challenge was installing and change over to an outside back exhaust (horizontal) to a vertical in wall duct.

My GE Profile Dishwasher was serviced 2 years ago for a faulty electronic control pad. It made starting the dishwasher a complete gamble, you never knew when it would actually turn on. I paid a couple hundred dollars to fix this problem 2 years ago and of course it has stopped working once again. So frustrating! GE decides to replace one bad part for another bad part. I then asked for the service call to be covered since it was obviously the same problem but they refused. So, GE am I to keep paying $89 for service fees so that you can keep replacing one faulty part for another? STAND BY YOUR PRODUCT!