My dishwasher does an excellent job - its a bit slow, but it gets the job done reliably. It is probably slow only because its old and somewhat tired...It does a great job cleaning off remains on dishes, which is not always the case. It doesnt fail me.

We purchased this new 8 years ago however the problems started after about two and a half years of use. I called GE when the paint started peeling off of the door of the microwave. They asked me if I cooked salty foods. I cook bacon in the microwave. They told me my only option was to buy a new door and have it installed. It was $250 at the time. I did not have the money or desire to fool with it. I continued to use the microwave and it has continued to degrade. Now eight years later there is so much metal showing that we decided we must do something. It is unsightly and very difficult to clean because its rusting. Ive been expecting electrical arcs to occur and the microwave to catch on fire. It hasnt done that. It has continued to cook the food. The entire metal area on the door is without paint. There are other large areas of metal and rust inside on the bottom of the microwave. The entire vent panel is without paint and rusted. We also had to have the control panel replaced twice. It was covered once under the warranty and once it was not. We also had to replace the element in the oven which is used rarely. To replace the microwave and oven combination now would be $3,500. When I do replace it I will replace it with a different brand.

I have a built in model that is now 9 yrs old and still operates as well as the day I bought it! I will definitely buy GE again. I have family members that have owned 2-3 microwaves to my one, that screams quality.

All I wanted to do was eat dinner with my husband and I wound up on the internet for an hour trying to figure out how to make our microwave work. There is some kind of thing that locks you out of using it. Very frustrating when you just want to eat dinner!! Nothing works and you have to google how do you unlock this piece of crap that you paid good money for and trusted the GE label. All we ever use is defrost food or time cook vegetables. If you want a complex computer, go for this thing. Otherwise, I suggest you go for a simpler microwave that you can depend on to work.

I purchased my new home equipped with all new G.E. Profile stainless appliances. Three years after that, our microwave (model number JE2160SFS01) had the magnetron go bad - no problem. I called G.E. and had a tech come out and replace it ($79.95). Great! 4 years later, it goes out again. But it’s still covered under warranty (cool). I call them, set up appointment, and ask what the charges will be - $79.95 home service fee. Fantastic! I schedule the appointment, and three days later, a technician comes to my home. I tell him it’s the magnetron, and he turns on the microwave for a second. He says yup and types his diagnosis into his laptop and prints out his estimate. He hands it to me, and it says “Total amount $ 270.10”! On a covered part!I asked him if he was joking, because the M.S.R.P. for that model, which I got from G.E., is... wait for it... $269.00 for the whole microwave oven! I threw the tech out and called their consumer advocate line (which took over an hour to talk to a human) and asked who sets their pricing for repairs, and was told their senior technicians set the labor charges! It’s a twenty-minute job! $190.00 for twenty minutes? So the tech left with $79.95 for doing absolutely nothing! Great job General Electric! I will never buy another product from you again! By the way, the magnetron they say is priced at $142.30 is available online for $97.50! It takes twenty minutes to replace, and a monkey can do it!

We purchased a GE JVM6175EFES microwave oven in 2014 and are now on our 4th unit. When cooking food, condensation forms and drips down the wall behind the microwave. GE replaced it with another, but it was a rebuilt unit which when operated caused sparks and smelled of something electronic burning inside. So another unit was ordered and delivered damaged. Now after a year, the 4th unit is once again causing condensation on the back wall. GE has no answer or explanation for this problem and really doesnt seem to care. This is just one of several problems weve had with GE appliances. We also had to go thru 3 refrigerators to get one that was not damaged from the factory. We will be trying to replace the microwave with a different model, but doubt if GE will work with us to get this resolved as their customer service has been no help at all. DO NOT BUY GE appliances.

The new home that we purchased had the above named dishwasher (GDT655SSJSS). When I run the dishwasher there is a very high frequency whine throughout the cycle - the only time it stops is when it is changing cycles. I have contacted GE Customer service 3 times... The first time I was told to add a quart of water to the bottom of the dishwasher and that should fix the problem. Tried that - still high frequency whine. Second contact - no response. Third contact - today- called customer service after my negative appliance review was rejected by GE (buyer beware of all those positive reviews) and was told that this noise is normal. Totally Unacceptable - since the sound hurts my ears and causes a headache - I have to listen to 111 minutes of this noise (except when the washer pauses to change cycles). This is the very worst dishwasher I have ever owned and even though it is only 2 months old I will be replacing it - and it wont be a GE Dishwasher.

Bought a GE dishwasher that a service bulletin was generated by GE on a fault in their manufacturing. DD03-16 for reference. The door does not stay shut and continues to open. GE customer service suggested replacing hinges and brackets on the door. So I ordered the parts and changed them. It did not work. I called them back and they suggested purchasing and replacing additional parts. I called a local 3rd party and they provided the service bulletin and said that this is a problem in the design of these models. GE will not repair the problem. The cost has been shifted to me or they suggest buying a new dishwasher for only $150 over retail. They are hiding behind a warranty that expired, but the problem started at time zero when it was made. This is garbage and I have been without a working unit and continuing to argue with them over the repair or replacement cost. Call if you have this problem because they have identified it and have a solution that they will not tell you about.

My GE Washing machine did everything it was supposed to do, especially in cleaning clothes and very few if any machine problems and they last years and years, mine was 15 years old. It kept surprising me because it ran so smoothly, truly cleaned my clothes and ran forever. The Dryer couldn't keep up with my old washer, had to buy a newer more expensive machine that couldn't dry at 8 years old. I loved my reliable GE washer.

I purchased a GE Cafe Over-the-Range Microwave along with a GE Range. It was delivered on Nov 2009. The control panel started acting up and quit working altogether in May 2011. I called GE and found that the replacement part and repair was almost as much as I paid for the microwave. After talking to several people and making my case, I was told they would give me a discount on replacing my unit. I was to look at microwaves and let them know which one I wanted. I have left several messages and no one at GE will return a call.

It works great. My microwave is a small white one that has the power to heat or make a dinner. I enjoy using it. I just press how much time I need and the microwave turns on and it either warms up my meal or cooks it.

There was a recall on my fairly new dishwasher. The heater was causing fires. The repairman came and said I had to remove my ceramic tiles in front of the dishwasher for him to pull it out. I called customer service and a Tina offered to reimburse me $200 to have someone remove the tiles and pull the dishwasher out. I paid a handyman $250 in cash to have it done, called GE and they sent a man to fix it. I called again for my $200 and explained their man fixed it. They now wanted a bill from my floor man. I sent the bill and they refused to pay because the bill did not say paid. I called and asked them how their repair person could have fixed it if the floor had not have the tile removed and the dishwasher pulled out for him. I said, Ask your repair person to verify that the tile was removed. The answer was they couldnt ask him. I sent the bill again with a note saying paid in cash, a picture of the floor and a picture of me - a 74-year-old woman with a note saying it was impossible for me to have ripped up the ceramic tile and backer board myself. Again, I got a reply that the receipt that I sent was not acceptable and the case was closed.

We have had multiple service calls where the tech explains immediately that he knows what the problem is, where there is a very loud buzzing noise as if you were going to be shocked by the microwave if you touch it while it is running. Now after fixing this problem multiple times, having the display burn out, etc. tonight we find out the microwave is actually turning ON when you open the door! This is a severe safety hazard! The interlock is doing exactly the opposite of what it is supposed to do!

Bought GE range microwave JVM3160DF3BB11/16 from Lowes. Tripped the breaker. Replaced the breaker with a new. Would immediately trip the breaker as soon as you pushed the start button. Last time it tripped the breaker oven went dead. Wont even light up. Junk. Do not buy made by Haier in China with the GE name on it.

I purchased this dishwasher on April 2018 and from the beginning was not working well. I called a technician about 2 months ago, came with the computer and told me it is working fine, but my dishes are never well cleaned. Anyway on Nov 27, 2018 the water started coming out from my tiles and I didnt understand why? I kept drying and it kept dripping. I was so worried and called a handyman. He told me it is the dishwasher dripping water. All my cabinets, my tiles are wet inside. I have called and report it and today a technician was coming to repair it (which I will not accept.) I want a peace of mind. I need a new working dishwasher. Today, the technician was supposed to call me before arriving and I was 5 minutes away and left. Now, your customer service reps are telling me to wait till Tuesday. I am having guests and my house is a mess, I have the dishwasher in the middle of my kitchen, everything is stinking to humidity and all happens because of this BAD PRODUCT. I want this trash to be exchange as soon as possible.

I bought a brand new GE Dishwasher GDWT308VBB delivered October 3, 2012 which promised: 5-stage filtration with Piranha hard food disposer, 5 self-cleaning filters ensure clean dishes, dedicated silverware jets, highly pressurized spray jets target the silverware area for improved cleaning; steam prewash - loosens tough soils before any cycle virtually eliminating the need for soaking or pre-rinsing dishes; auto wash cycle - cycle automatically adjusts to soil level to maximize energy savings and ensure clean dishes; natural convection heated dry option, a drying element effectively dries dishes reducing the need to towel dry after unloading; 52 dBA sound level - nearly silent two-pump system cleans dirty dishes without disruption. No matter which cycle or combination of features I use, my dishes have yet to be cleaned. Contrary to advertising above, I do need to rinse dishes prior to cleaning in dishwasher and also rewash dishes after dishwasher cycle is completed. I previously had a Maytag which at 15 years old performed better than this new GE Dishwasher. I have written GE describing my dissatisfaction and expect their promises to be delivered.

In January 2010, I bought a sensor cooking microwave oven (Model: JES1460DN1BB Serial #: MS900742B). I paid almost $500.00 for it. Now, in less than two years, the inside is already clipping off so it is dangerous to use. I returned it to the store and was told that the guarantee was good for only one year. So, I would have to pay to have it repaired. My last microwave (before GE) lasted well over 10 years. I always thought that GE was a good company; I guess not. I feel that it is their fault. I seldom use the microwave and I even clean it with a damp cloth. I do not think that I should have to pay for the repairs and I should be given some kind of a discount on a new one. I feel that GE is now in the business of making effective appliances. They should stand behind what they make.

We bought this dishwasher, with third rack and steel tub, after extensively reading reviews online. We went through Home Depot and had to wait a month for the dishwasher to be delivered. We have had it just over a month now and not only does it fail to get all of the dishes completely clean (even when run on heavy cycle) it NEVER dries even with the dry boost on. We never overload it or load it incorrectly and still there are dishes and utensils with food residue after its done running which takes hours. I predict it will rust out in about five years (planned obsolescence). The only feature Im happy with is that it is nearly silent. Not hearing it run helps to not remind me how much money we wasted.

Dishwasher looks and works beautifully. It is slate black and I have never had to redo any dish or glass. It is located. About 12’ from our bedroom door and we turn in on before go to bed. It is so quiet that we never have our sleep disturbed.

Our dishwasher has gotten very warm mid-cycle and now trips the breaker in the house each time we run the cycle. The problem became evident in April 2012. We have called in a GE repair person to fix it and they said it was a heating issue and not repairable. We have not used it since, but have not replaced it with a new one yet. In August, we read about the recall of a similar model number manufactured within same time frame. Our machine model is PDW7300J03WW, the recalled model is PDW7. Our machines serial # is **. Strangely, the serial number is not listed in the recall, even though symptoms are exactly the same!We have called GE Consumer Affairs at 1-800-386-1215 four times, the most recent today, 9/14/2012. Each time we call, we are left on hold for 59 minutes only to be disconnected automatically! I am sending a registered letter to GE CA with a copy of this link and intend to contact my local news if I do not receive sufficient response within the week. Does GE need to see an actual fire report from my fire department or worse in order to get their attention to replace the unit? It is disgraceful and extremely dangerous.

GE microwave model JES1344ES. This is a stainless steel with black accent 1.34 cubic foot microwave oven. It looks great. The micro is heavy for its size. The stainless steel is brushed and low luster finish. The door handle is chrome as is some of the other accent pieces. The push button panel is easy to read and has a large knob for making manual time adjustments. The light inside is very bright. There is a rotating platter in the oven compartment that is not knocked off of its guide rollers very easy. The push button panel is a glossy black material that is easy to attract fingerprints. The preset times that are programmed in the microwave is the only part of the product that could be an issue. For example the popcorn button when used has burnt all of the different brands of microwave popcorn that we have tried. It is set about 30 seconds too long. There is no way to adjust the preset time that I can figure out. We set the time with the large knob manually and the popcorn comes out just fine. The preset times for the Auto Defrost are also a bit off. They are not long enough. We also have a Subzero freezer set at minus 20 degrees Fahrenheit so that may be too cold for the defrost presets. Overall the microwave is great except for the preset times that Ive mentioned. We use it daily and have done so for five years. It still looks excellent inside and out.

The microwave is small enough for 1 person and yet big enough for a family of 4. I feel it cleans up pretty easily also, inside and out. This is also a stainless steel on the outside, that makes it easy to clean.

We bought a new $700+ Stainless Steel dishwasher 10 months ago. It has failed on several occasions, and we have been without a fix or replacement for months. We are forced to have 5 service calls, none of which have fixed it. We have been hand washing for a family of 6 for months now, and GE Consumer Relations is totally unwilling to replace it, but rather continue sending out the same service tech with no new parts or ability to correct the problem. It is the definition of insanity while we are left holding the bag. Totally unwilling to do the right thing and it is maddening to say the least. 3 months of back and forth about our need to have it replaced, and their answer is send another service person who are now 0-5. This is the worst customer experience I have ever had in any situation for anything.

Purchased the cafe dishwasher in March. We are now on our second one as the first did not work and now this one does not work. It worked fine for the first couple of months and now it’s doing the same thing as the first one. Pump is on the fritz apparently. Truly disappointed. We owned the cafe dishwasher at our last house and loved it so we made sure that we purchased the same one when we bought our new house.

My dishwasher is doing the same thing as the recalled models. The GE Cafe model is not included in the recall. The dishwasher front, which is stainless steel, becomes so hot it burns to the touch and stays that way for hours. Burning smell in the kitchen! Cafe models need to be added to the recall!

I just dont know how to start to show how disappointed and upset Im about this Microwave. I know GE is good brand but this Microwave must be the worst. I bought this microwave between July or August in 2016. Unfortunately, I lost the receipt. I bought a cash at Home Depot in my area, because I bought it cash Home Depot unable to find a record of but they remembered I did buy there between that time. I know bought that time because I bought my house in July 20116. This microwave started giving problems since June 2017. When I call GE they told me, they cant help because I dont a receipt, and they told from their record, this microwave was purchase in January 2015, they didnt want to believe that I purchased it in 2016.They charged over $100 to have a technician to come, he has to order a part that cost as well over $100, when the part comes another technician came. It was the wrong part. He had to order another part. The technician came back and Microwave work for only 1 or 2 months and stop working. Its been very stressful with this Microwave. This microwave was the most expensive, I bought over $500-600. Even though from your record you said I bought it in 2015, it still unfair, no one expect to buy something that expensive and break down that fast. I dont what to do. Im just so frustrated about the whole situation. This microwave cost me about $ 1,000 now from price to repair, and yet still not working. I wish someone reply to me and help me, if no one help I never wish to buy a GE product. So Sad GE, I need HELP.

I have had two service calls on this dishwasher (Model Number GDT65SMJ0ES) and it is 18 months old. The first was to replace the heating element, which was under warranty. The recent problem was a cut-off switch that will trip when needed. The technician hooked up his computer to turn it back on, a very quick procedure, and it cost us almost $100. This unit should have a trip switch like a vacuum or garbage disposal so that the owner can do it themselves. After that, if the dishwasher still doesnt work, then a call for repair could be made. By the way, the repairman was very nice and respectful to us.

Ever since I bought this dishwasher in Jan 2014 it hasnt dried properly. Finally had a tech come out and he told me the water wasnt hot enough. How is it energy efficient if I have to raise the heat in my water heater to get the dishes to dry???? Very dissatisfied! My old dishwasher (with plastic lining) dried the dishes with no problem. I had it for 16 years before I had any problems with it. This new one is a problem from the first time I used it. No GE ever again!

Im very upset with my self for not doing the proper research on this product. I cant imagine a dishwasher being worse than this one. From day one, it never cleaned; half the dishes are always dirty. Some soaps work better than others. Still dirty dishes. We paid nearly $1000 for this machine, and once again, it has backed up. I will do my research next time. Their service department tried to tell me it was because it needed to be cleaned. GE never again! I have a busy family, and there is nothing more frustrating than having a dishwasher and not being able to use it.

Slow leak that caused E4 code to beep incessantly! Had a warranty repair person look at it... Turns out the new dishwasher has a faulty seam that in fact leaks! This is all fine until... one has to make numerous calls to the GE warranty line, which should be called a WARNING Line. The customer service rep was very rude and reprimanded us for not noticing the leak sooner, he seemed to not believe we had any issue... All because they could not find the service repair # that was submitted.Anyway, two weeks later we still wash our dishes and NO one has called us back from GE with any answers... SO FRUSTRATING! DO NOT BUY A GE PRODUCT whatever you do... This company has the worst customer service and warranty program. We make our daily call in hopes of being looked after one day... They keep telling us that a manager has to approve the replacement of this POC unit we spent $917 on!!! My business partner is about to purchase 20 GE dishwashers for his apartment block... I guarantee that his order will change after we chat this weekend! Thoroughly done with ALL GE products after this nightmare!

I purchased all the kitchen appliances. All GE brands. The microwave after almost 3 years the white paint from inside start peeling. When I called GE directly, received no help at all. They wanted to replace the microwave and the stove for over $2400. I can buy the full set from Best Buy for almost $2300 all in Samsung brand. Also, this related to paint issue. Maybe the paint is a very low quality or something related to lead-paint. Imagine you are warming up the food and know nothing about the paint is peeling, and each time you have small pieces in your food. I wish I could add the recording of the microwave that everybody could see.

I purchased a GE over-the-range microwave, GE Profile **, on 2/22/2005 as part of a kitchen renovation. I also purchased the GE Profile dual-fuel range, **, and the Profile ** refrigerator at the same time.I am now having to replace the over-the-range microwave as the interior enamel is chipping off in chunks rather than the discreet amounts in the beginning. The dual fuel range burst into flames and was replaced 3 years ago (the line was eventually recalled). The tracks that support the drawers in the refrigerator are breaking off slowly but surely, meaning they will not be useable shortly. I would not take a GE appliance as a gift.

We got the GE cafe series appliances with our house. We just completed 16 months in our new house and the microwave stopped working. We had to call the GE cafe person to troubleshoot the problem. He charged us $80 (without even touching the microwave) and said we will have to spend $450 more to fix it. This is such a horrible customer experience. I had a $40 microwave in my old apartment which lasted for 4 years without a single problem. I am definitely not paying $450 for a useless microwave. But now I am worried about remaining appliances I have from GE. I understand that you would say you cant do anything as the appliances are not in warranty anymore. But if you really care about your customers, you should start looking into this and fix it. I am very very disappointed and I am not letting this go. I expect someone from GE to help us to get this fixed. Thanks for your patience to read this outburst of a disappointed customer.

We purchased our new GE Over-the-Range Microwave (model HVM1750DPWW, 1.7 cu. ft.) for $269.00 in February of 2012 and in August of 2013 it started to malfunction. Specifically the microwave would start on its own whenever we would OPEN the door. Now the microwave does not work at all (with the door closed or open). Based on the feedback that I have read in some of the posts on this site, I will replace the microwave since the maker can no longer be trusted to manufacture units that are robust and safe. But what manufacturer can be trusted at this point? It is my understanding that all microwaves (from all major companies) are currently made overseas with poor materials and highly suspect safety and quality standards. (Note - previous GE Microwave [same type - over the range] lasted for 14 years.) Thanks to Consumer Affairs for allowing us to post unfavorable reviews.

Seems to be a lot of wasted space in this GE dishwasher. If it had a 3rd rack then I would rate it higher. The back has additional sprayers, but the sides do NOT. I would think that having sprayers all the way around would help with sanitation.

We bought a top of the line GE microwave oven (model PEB7226DF1BB sn VA201160N) in 2014. It has now failed 5 times in 4 years - 2015, 2016, twice in 2017 & now 2018 - and the repairs have cost us more than the original price of this piece of junk. We bought it from a local dealer, KAM Appliances in Hyannis, MA, but had to resort to an independent repair service, because KAM was not very responsive. I know that I should have given up on it a long time ago, but in the past I always had good luck with GE appliances. Needless to say, I will never buy anything from GE again. I have learned that GE Appliances are now built by Haier, a Chinese company. No wonder they are junk.

This is the second GE microwave. In 2 years I have had that, the paint peeled off inside the microwave in sheets! I contacted GE the first time and was offered no help or explanation. I was told it was an older model, even though I bought it new. This time, I just chose to throw it away and never purchase another GE appliance again!

The side panel of our built-in GE Profile microwave 1999 caught on fire when my daughter was using it. It had a faint glow behind the metal plate. Then, it became flames quite quickly. A flash and pop was the ultimate end before we turned it off during the test. It had been working fine until the fire. This is a definite safety issue. Now that I know the microwaves have been faulty, it makes me concerned about the GE Profile electric stovetop burner. I have noticed it gets extremely hot and doesnt seem to want to turn off!

I just found the site for the review on 5/17. Ive had two GE Cafe microwaves model CVM2072SM3SS purchased at the same time for the two kitchens in the house. The microwave in the in-law suite lasted one year and I replaced it with a very economical one which has been fine for 3 years. The electrician could not repair it. The microwave in the main kitchen is 5 years old but it stopped working (same issue of frozen panel) after 4 years. In Nov. 2016, during Thanksgiving weekend, it froze and stopped working. I looked on YouTube and we cleaned the terminals in the panel using alcohol. That worked for 2 months. When it stopped again I tried the same remedy but it did not work. The panel lights up, but it will not respond to any commands. After 7 months of it being inoperable, I decided to either fix or replace it (while using a way cheaper GE from a friend).This is an abysmally poorly engineered VERY expensive microwave. The LED panel is a disgrace! Do not buy CAFE microwaves. Im out $1500+ (for two) plus the replacements, the aggravation, the ugly looking counter with the loaner from my friend. I am ready to bite the bullet and buy a microwave that fits the style of my kitchen. It wont be a CAFE! Although it is a set... Enough is enough. I give up.

Paint is peeling on the top part of the oven. It could fall into food. This seems to be a common problem. Called GE. They said it could not be repaired and to stop using it. Buy a new one. What kind of product do they put out that cannot be repaired? Not very good in my estimation. Customer Service did not offer much assistance to replace it. Be warned. Don’t buy GE products.

Our builder installed our GE microwave Model: JVM7195SF1SS as part of our kitchen appliances. It worked fine for about 3 1/2 years. Then it stopped heating. It turns on and appears to work, but after inserting a cup of cold water and running it on high 10 minutes, we remove cold water. I looked into this and found that the magnetron (spelling?) tends to fail. Apparently, its a known issue, based on the reviews. GE wont allow consumers to replace this and doesnt provide replacement parts. Getting it professionally repaired will cost more than the microwave is worth. GE sent me a certificate for $150 to replace it, but it will cost at least twice that to purchase a new unit and get it installed. Plus, we have to buy another GE. I dont want to end up in the same situation. So we didnt use the certificate.

We purchased a new General Electric (GE) Adora microwave model DVM1850SM4SS from Home Depot for approximately $355.00 in 2010. It was manufactured in Malaysia and had been in use for 2 years and 9 months before the magnetron failed. I spoke with a GE Customer Care representative on two occasions, and she said that the best that GE could do was split the cost of parts and labor since the 1 year warranty had expired. We had not purchased the extended warranty believing at the time that a microwave generally lasts for many years, and GE had always made quality products and would stand behind them. I indicated that I wanted to have the problem properly diagnosed by the service rep recommended by GE before proceeding further. The 10-minute service call bill set us back approx. $100.00. It would cost at least another $170 to replace the magnetron if we used the service tech contracted by GE. For $270, I believe we could find a fairly nice new microwave. I looked at alternative options for repair or replacement, since I am rather partial to the looks of the over the range stainless steel Adora. The model we have is no longer manufactured, but GE now offers the 1.9 cu. ft. Adora that Home Depot sells for around $400.00. In my internet research, I noted several postings that indicated that due to the high voltage danger of the magnetron, only trained technicians should attempt repairs. After half a dozen calls, I fortunately learned of a Microwave Service Center close to our residence that could replace the magnetron. After taking it down from above the range, hauling it in for repair and paying the approx. $104.00 bill and hauling it back to our residence to mount on the wall, we have a microwave that should work for a while! Total cost including service call for diagnosis - $204.00. Considering that GE does not wish to stand behind the quality of their products, I would not be likely to purchase a GE product again.

My parents owned the same GE microwave for over 25 years and had no problems with it. However, after theirs finally died 2-3 years ago, my parents made the mistake of purchasing another GE microwave. BIG MISTAKE!!! It wont turn off unless they unplugging it! They have already paid to have a tech come out to fix it but the problem started again 3 months later. I called 1800GECARES and they said you either need to have a tech come out or we can replace it. I said Do you mean your solution is that my parents who just spent several hundreds of dollars on your defective appliance should spend several more hundreds of dollars to purchase another one from GE? Why did their last one last over 25 years but this one only lasted around 2-3 years? Why dont you stand by your products? Their response was I can connect you to customer service for further help. I said I think Im going to stop wasting my time. and hung up on them. Dont trust the GE name, it doesnt mean what it used to!!!

Over-the-range microwave failure (model JVM2052, manufactured Dec. 2010) was purchased and installed professionally in March 2011. Total cost is $546. First, the fan failed in about June 2012 and I thought I can live with this. In Sept. 2012, the unit failed, but the interior light and clock still work. I paid $97.00 for a service call from the dealer, and the tech said the power source failed(?). Estimated parts and labor for repair is $370. So, I will buy a new unit (not GE) and pay about $150 for delivery and installation and take away this GE unit. I live in Morris County, NJ and this is not a rural area! GE service rep whom I called said GE doesnt service this area and to look in the yellow pages for an authorized dealer. I called again and got the name and address of the president of GE Appliances, and I am going to write about this product.

My GE DVM5140DN1BB Serial # ZS 902371B manufactured in December 2009 has stopped functioning. It looks and sounds like it is working but it will not heat. GE only guarantees their warranty for 1 year after the date of purchase. This should have been my first clue. For a fee, they will come look at it.Growing up we had an Amana Radar Range. My mom bought it in 1987. I replaced it so that I could save counter space and also that it would match my other kitchen appliances. I bought the GE microwave in May 2010. This product lasted for a total of 16 months. Ridiculous! In my opinion, big business companies no longer have to be held accountable for producing bad products. Money was lost but will never again be spent on a GE product.

GE Stainless steel dishwasher rust inside. Its more show than function. Size is great. GE stated in writing that this is normal for GE stainless steel appliances as GE stainless steel is not real stainless steel. Rust is not covered by GE warranty!

GE Cafe Series dishwasher model # CDW9380N20SS is a fire hazard. Three days ago, our GE Cafe Series dishwasher nearly caused a fire. If I had not been home that day, it surely would have. I ran the dishwasher as usual and went about my day several hours later. I detected a strange acrid smell and with my five-year-old who was ill and at home that day, discovered the dishwasher door was burning hot to the touch. I needed a potholder to open the door. Once opened, there was a blast of heat and smoke. I needed to use oven mitts to protect my hands from the heat to pull the racks out and handle the dishes. The heating element did not deactivate at the end of the cycle.If I had not been at home, the house would have been destroyed as all the plastic items on the top rack in the dishwasher melted. In addition the plastic parts of the lower rack, the wheels and their clips; the silverware holder; covers; the clips that hold the pot tins in place were destroyed, to the point that the majority of our silverware was coated with plastic. The plastic on the lower water dispenser has been demolished; it completely melted more than 50% of the plastic covering on the arm and is charred and burned. We are so lucky to still have a home!The door must be kept open. When the door is closed, the element super heats and presents a major fire hazard. We have noticed that there is a recall for similar models with plastic tubs, but ours has a stainless tub. GE needs to broaden the recall to include all these models. This is a serious issue that needs to be addressed immediately. Our GE Cafe Series dishwasher model #CDW9380N20SS was installed on October 1, 2008. I would not be surprised to find that parts from the recall in April 2008 were also used in the Cafe Series. I have discovered in the few days since the DW units malfunction that there are over 1000 complaints listed with similar, even identical complaints, on multiple internet sites with the same problems.

We recently purchased a new GE microwave and are pleased with its service and price. The microwave is attractive and seems to be constructed well! We would buy another GE product and feel that they provide quality in appliances!

Last year in November while we were sitting in our living room and watching TV around 11:00 PM, we first smelled smoke and then noticed fire under the countertop above dishwasher. Luckily, we were awake to put fire out and disconnect dishwasher. This was all stainless steel, top of the line Profile dishwasher, part of our all Profile line. The next day I called GE customer service only to learn that dishwasher was recalled and that we were never informed about it. Very generously, they offered to replace our unit with equal top of the line PDT750SSF0SS. Instead of taking them to cleaners, as my lawyer suggested, I was stupid enough to accept this offer. A week later, dishwasher arrived but straight out of box, the door was damaged and it was full of water for some reason?! Another week passed by and finally this piece of junk was delivered. This December of 2014, just 3 weeks out of 1 year warranty, dishwasher stopped drying dishes. I called customer service and when they learned that I never purchased extended warranty, they told me to hitch hike. They offered me special customer service number which I called, they placed my name on the list, and never called back. This is the worst company I ever had to deal with, the worst products hands down and the most horrible customer service. If you dont take this post seriously and do not run away from GE, I guarantee you will be writing one of these posts, few days after warranty expires. I have reason to believe that these machines are somehow programmed through their computer to stop operating after warranty is out. Monday comes, I am calling DA office and filing claim against this predatory company. BUYERS BE AWARE!!!

Not very satisfied with the functionality. Turntable does not work or has ever worked. Time features and power adjustments are not very intuitive. I would not recommend this brand, I believe there are other brands out there are much better for the same price range.

This microwave (jvm1540dm5ww) works fine but the plastic door is fracturing into bits. I expect this is because of faulty plastic in China. Cheap alternatives for fast profits. The machine is out of warranty. Replacement door is almost 160$ with shipping. Planned obsolescence by corporate America. This machine works fine but is a waste because I don’t trust the replacement materials to be any more stable. I rated this a two because the actual operation is fine. Sorry GE. I will not buy your brand.

We bought a new GE microwave oven in 2007. It failed in 2018 after much, much use. We replaced it with a Whirlpool which failed in one week. Lowe’s let us return it and we bought another GE like our original and we are very happy with it.

Have had this microwave for about three years, no problems so far. White so it matches our other kitchen appliances. Good size for most uses and easy to clean.

Been using this microwave more than 3 years, more than happy with it. It has out performed all of my prior microwaves some costing much more. Will definitely re-purchase this brand again in the future.

GE Profile Microwave wall oven combo model PT970SOM1SS - We have a few years old unit very gently used. However, we now have the paint peeling and flaking from the top and back interior wall of the microwave. Some spots have bare metal exposed. Contacted GE and they told me there was no fix for it other than replacing the device. Now they cannot replace the Microwave alone. The whole unit has to be replaced at a cost of ~ $2800.00. This is ridiculous. There should be a recall as there are several other complaints about similar issues.

My 11-month-old GE Advantium oven no longer has any display, totally blank. When calling to make an appointment I was unable to speak to a live person but scheduled one for today from 1-5 pm. At 5 pm I received an automated call that the technician was running behind and would arrive in about an hour. By 8:30 pm no one called or came to repair my oven. At 4 pm when I was wondering if I would see a repairman I attempted to find on the internet a phone number that would connect me to a live person but had no luck. I have no idea what company is being sent out to make the repairs so that I can get in touch with them. Their service sucks.

Bought a new GE over the range microwave in April 2021 and it broke/stopped heating July. They replaced the magnetron in September and its broken again a month later. Same issue and parts are out 2-3 months.

We lost our old refrigerator to a lightning strike and had to get a new one ASAP, and it had to be counter depth, a great ice maker, side by side, and not be a SS finish. My wife and I hated our old SS one but liked everything else on the old unit so we went looking for a new one that met these requirements. What a chore, this was not an easy unit to find as most everything now has a bottom type freezer. This was defiantly out of the question.

I bought a brand new house and it came with the set of GE profile appliances in 10/2009. In November of this year, it came on for one minute on its own and then popped and indicated a circuit board failure. The inside of the microwave was extremely hot and there was obviously an electrical short. This could have burned down my house! My fiance replaced the circuit board at a cost of $125. I negotiated from the service department that supplied all my builders appliances. This week it happened again. This time, there was a cup of coffee in the microwave and it boiled in the minute before the microwave fried itself! I cant believe that GE still has this product on the market! Any product on the market! I have to replace this because I cant sleep thinking its going to catch my house on fire. Are there no ethics anywhere?

This machine washes glasses sparkling clean with the use of a rinse additive. I like the fact that it has a top, middle and bottom spray blade; it has a moveable silverware bucket; it is very quiet; it provides that you can wash the upper level separate from the lower level. It seems to make use of the maximum amount of space inside. The appearance is sleek and modern. During the first few washes there is a distinct heated rubber smell that emits from the machine; however, this should dissipate completely by the fourth, fifth or sixth wash.

Door would not latch, so entire locking mechanism was replaced. Still wont lock. Repairman said it looks like door is warped or bent and door may need to be replaced. We have used the dishwasher twice a week for a year and suddenly it wont lock. Have heard this is a common issue. Is this true? Is there a recall?

We have not had any issues with our microwave. It is relatively easy to operate (how difficult can it be, right?). Overall, we are pleased with our microwave. The microwave was already installed when we purchased our home, so I cannot speak to whether or not it is worth the price.

I have a GE dishwasher that shut itself off after three uses. It was rebooted by a repairman, and worked once. GE repairman called to let me know and I was originally scheduled for today but have been canceled. I’m taking the day off but for nothing. There’s no number to call. There’s no one to complain to. JCPenney is not standing by their merchandise because I did not buy an extended warranty. Originally purchased in November 2017. The machine was replaced by GE in December 2017. I have a dishwasher that I paid over $500 for and I’ve used it four times.

Have a GE over the range microwave oven, MODEL PVM1870DM3CC which started turning itself on for 6 minutes, repeatedly, WITHOUT being touched!

I cook a lot of popcorn in my microwave and it hasnt burn a bag yet. It warms food quickly. Also, it cooks bacon really good. But the best feature is the steam cleaner that saves me time. It steams for about 2-3 minutes then all I do wipe the steam off and its clean.

We bought a brand new GE dishwasher from our local hardware store on Black Friday. It was $600 dishwasher on sale. It was installed on December 5th, it broke on December 6th, and we had a repair man come out to take a look at it. To be fair, the local hardware store did ask if we wanted to replace (2 week wait time) or repair (2 day wait time) it. Since it was a bolt that was severed (by opening the door to the machine, mind you), we figured it would be an easy fix. The first technician who visited said, Yeah, its broken. I have to order a new bolt and then come back out in a week to fix it. And oh, by the way, Ill have to drill a new hole for it too. Thats when I called GE customer service to request a new product. But since my 48 hour window had passed, and we opted to have it fixed, it was keep it or ask our local hardware store to replace it at their expense. I bit the bullet and just had it repaired. Now, less than 2 months later, the technician has been at our house three times. He’s soon to have a fourth visit because we need a new dispense modulator. After speaking with customer service several more times, and with a not very nice lady in the Chairmans office, I still have a defective product. Oh, did I mention that Im paid hourly and have now taken off 13 hours? So what’s the use of that $600 dishwasher that we bought? Its been out of commission for more than 2 weeks, in less than 2 months, and has now cost us $900. Thanks, GE! We’re so glad to see you stand behind your product.

The WORST Customer Relations Department & GE Dishwasher EVER 1. Ordered dishwasher & Scheduled Delivery. 2. After my 4 hour window of waiting, I was called and informed the installation needed to be cancelled due to the installer calling in sick. 3. During installation, they dropped my dishwasher & dented the door. I rejected the dishwasher as my other one was already hauled out. 4. Due to my hectic work schedule, my dishwasher was installed about 2 weeks later. 5. Dishwasher was not cleaning. 6. Technician came out another week later and I was told it was MISSING parts from the manufacturing plant and should have never passed QC. In addition, It was missing the bottom spinner and the top spinner was snapped off. The technician glued it back on.7. Called Customer Relations to get the runaround saying, its not their fault it came from the manufacture missing parts.In closing, I own a large apartment complex and have many BUSINESS friends. I will NEVER buy a GE product EVER again and to think of all the people I know, Im going to share my horrid experience with everyone I know. This will make great conversation when golfing too.

GE profile microwave TOUCH SCREEN pvm2070sm4ss - Almost new. Used properly. Touch screen failure. TOUCH SCREEN does not function properly making it almost impossible to use the microwave. This Common Problem should be a RECALL.........

My GE Profile Dishwasher is a plain Jane without the bells and whistles, yet is a trusted, working appliance. Honestly, the only beef I have with this model is that plastic articles do not dry completely unless placing the controls on Heated Dry, and leaving the dishes in the dishwasher for the entire drying cycle. I have had my kids place some dishes in the dishwasher, caked in day old food. I left the plates in the dishwasher, hoping to teach my kids a lesson about rinsing off their dishes before placing them in. Imagine my surprise when after running the dishwasher through its normal cycle, the plates came out spotlessly clean! Impressive!

Three nights ago, I loaded my GE Profile Dishwasher, model # PDW9880L00SS and began the wash cycle. The wash cycle completed and I went off to bed leaving it on the dry cycle. The next morning I smelled a burning smell but did not know where it was coming from in my home. A few hours later, my husband began searching all of the appliances in our home to see what the burning smell was. When he opened the dishwasher smoke came out of it and everything in it was completely burned. Apparently the drying mechanism never turned off after the wash cycle or it turned itself back on only on the dry cycle. I dont know. But I know one thing for sure, we are lucky that my husband was home because I left and if he wasnt there, Im positive that the dishwasher would have caught on fire causing severe damage to our home. I will never purchase a GE appliance again. Note, I also have problems with my GE refrigerator and my GE Profile microwave and our dryer. Weve had to replace the dryer and the microwave and weve repaired the refrigerator. I have a repair person coming out to see if the dishwasher is repairable, but I dont think it will be. This is terrible.

I have a General Electric HVM1540DN1WW over the stove microwave that I have had. This month will be a year and a half. The oven stopped heating so being a DIY person, I pulled the oven out and took it to my workshop to see if it was something I could repair. Inside the front panel was a very helpful schematic of the whole oven. Using the troubleshooting step listed on the paper, I found that the Magnetron tube had gone out. So I went to my owners manual and found that the tube had a four-year warranty on it so I called General Electric consumer relations to have the part replaced. First I had to fight with them because they said it was only covered for a year. After about an hour and a half on the phone and giving her the publication number on the manual, she agreed that it was indeed covered for four years. So she said that she would replace the part and she would even send a technician out to install it at no charge. I was very happy at this point. She said that she would ship the part to me next day with UPS and the tech would be out the following day to replace it. So far so good, till the next day when the part did not arrive. I called back in to General Electric consumer relations and spoke with a man this time and he told me that she had canceled the order that is why I did not receive it, and he couldnt see why. So he looked at the comments she had made the day before and did see that she said she would replace it and send a tech. The tech was supposed to be here the next day and I had no part for him to install. The man said he would place the order and have it shipped to me by the next day no later than 10 a.m. and the tech would be here between 1 to 5 p.m. Great! Until the next day and again no part when they said it would be there. Again with the call only to find out that it was scheduled to arrive next day guaranteed by 7 p.m. The tech is supposed to be there with in the next few hours and I wouldnt have the part. I called Fed-Ex and sweet-talked the lady into getting a hold of her driver to see if she could get to me ASAP. Bingo, next thing you know I have the part, the tech calls and the part is replaced. Oh boy, the big gaping hole above my stove is finally going to be filled once again. (I promise I am coming to the end.) After reinstalling the oven, I found out that it was taking longer to heat than when I got it, and it has a brand new Magnetron in it.Again with the call to General Electric consumer relations to set up another tech to come out and check it out. So the following day, the same tech arrives and puts a cup of just barely cool water in it and puts it in for 30 seconds, pulls the water out and says it is working just like it is supposed to and leaves. Well, again I called General Electric consumer relations to let them know what has transpired, but this time I asked to speak with someone higher up the food chain. I then spoke to a lady and she said that she would set up another tech to come out and check it out, and if it resulted in the same way that she would replace the unit with a new one. The following day, the same tech calls me and said that the oven is working the best that it could so I should call back to consumer relations as he did and set it up for a new one to be sent in its place. So I called once again and was not able to speak with the same lady and the only thing she could do is send me a voucher for $250 laying around for a new oven, but I would have to purchase one and send the voucher in with the receipt to get a refund. I told her that I did not have a spare $250 dollars around to go buy a new oven and then wait for the refund to get to me. So I asked that she have the lady that said she would replace it to call me back to straighten this problem out. Finally the following week, the lady calls me back and said, This is the best that I can do, due to me voiding the warranty. I asked, What? She said that the tech that spoke with me said that because I had hard wired in the unit to the house wiring, it was receiving low voltage so she couldnt do any better than that. I told her that was the most asinine comment I have ever heard coming from a field tech and asked her whether he went to a school backyard Techs-r-Us. I asked if she would have the tech call me to explain. I also gave her some friendly advice that she should not use that comment to anyone else for fear of someone laughing at her. We agreed to have the voucher sent if that was the best she could do. I will not buy another GE appliance again! I have purposely not mentioned anyones name because it was the experience, not the person that I spoke with.

My GE dishwasher is 34 years old and it still cleans every dish, pot, pan and silver spotlessly. It has never needed a repair and the racks are in near perfect condition.

This is the second time that my GE microwave oven is peeling the paint on the inside of the oven. We paid over $240.00 the first time and think that this is a serious flaw this particular oven has. I think that the company should be liable, not the consumer.

I purchased my GE Microwave about a year and a half ago. It has served me with flying colors till yesterday. To explain, I was boiling a small plastic pan of water for some rice. I have done this many times in the past. In the middle of the cooking cycle I heard a loud bang from the microwave. I stopped the cooking cycle and opened the door. To my surprise the glass turntable had shattered into several pieces. I cleaned out all the broken glass and tested the microwave. It seems to be working perfectly with the exception of the glass turntable. A new one was ordered. No further action is required. This is just an information for GE.

This dishwasher is cheaply constructed with a plastic interior. It is so loud that we run it when we are away. Its impossible to watch TV while this thing is running. Also the dishes come out with a film on them. Not happy with the low grade appliance at all.

I like the electronic beepings that let you know your settings, and it can be changed to your preference. I inadvertently hit the settings button and turned off the beeping and I thought the microwave was failing after only 3 months, but I discovered my error, fixed it, and all is well.

We bought the GE dishwasher from Lowes 3 years ago and have had it serviced 3 times! The water pump went the first year and now the drain pump! Love the coloring Slate but very poor quality. Will not purchase GE products again.

Bought all new General Electric Appliances in 2002. Dishwasher, Washing Machine, and Dryer replaced after 6 years. Handle on Advantium Microwave replaced twice at the cost of $50 for handle made of plastic? Today our house smelled like burning plastic which upon inspecting dishwasher, found the heating element was COOKING everything in dishwasher. Got so hot that is melted the silverware bin and anything plastic in dishwasher. Glad we were home to unplug unit which we could not reset the controller on door of unit. Consumer Product Safety Commission is aware of this incident and is VERY common complaint with this Manufacturer. I have been on hold for 30 minutes with GE consumer relations phone number 1-800-386-1215. Was told by automatic system wait time was going to be 5 minutes. Figured I would write complaint on here as well while holding...READ CONSUMER REPORTS and stay away for General Electric Products!!! Model Number is PDWF480P00SS. Serial number is GS734641B.

Used the dishwasher for 1.5 years (it worked fine), but then the heated dry stopped working (only 1 year warranty). $500 for diagnosis and repair versus $700 for a new dishwasher. Guess I’ll be getting a different brand going forward.

I bought a GE dishwasher model #GDF570SSJSS from Sears. It was delivered on Thursday, installed Friday (by myself and a daughter) and the first test run produced nasty, dirty dishes. It took 2 hours and 10 minutes for it to declare that the cycle was finished and the dishes were clean. Fortunately I did not opt for the drying cycle. Or else the nasty crud would have been baked on. I called GE service and they scheduled a Monday service call. Monday, a very nice man hooked the unit up to his computer and found nothing wrong. He then placed a plexiglass door on the unit so he could watch the cycle. He found that the connection to the upper arm was not attached. He snapped it into place and declared that it was fixed.While I watched through the plexiglass door I was appalled that the reason that the GE dishwashers are so quiet is that the washing spray is extremely gentle. The technician seemed very proud of how quiet the units are. I told him that I could get my dishes cleaner if I spread them on the lawn and used a water hose sprayer. He was not amused. I chatted with him and asked several questions and learned some interesting facts. The lower and upper spray arms and the top rain action do not all happen at once. First the lower arm sprays, the machine pauses, then the upper arm sprays, the machine pauses, then the top rain action happens. This cycles over and over until the machine thinks the dishes are clean. I asked why there wasnt a hurricane inside the unit scrubbing my dishes? He said that the motor is a DC motor, I asked how many volts, he said 12.After he left I filled the machine up with dishes I had saved over the weekend for the test. The machine ran for 2 hours + (I forgot to write down the start time). The end result was nasty, dirty dishes that I washed in the sink afterward. So the new dishwasher looks just like the old dishwasher but let me tell you, she is not happy at having the worthless piece of junk sitting nearby and doing nothing while she is sweating over a sink full of dishes. When Im not quite so angry in a few days I will have a conversation with Sears to try to resolve this.

The GE dishwasher does a good job of cleaning the dishes however we have had to replace the door gasket on 2 occasions because of door leaks caused by the bottom tray catching on the gasket when pulling the tray out to load dishes and it pull the gasket off the door.

We have a lower end GE stainless steel model that came with the purchase of our new build home. The washer is just average and does not have a huge capacity. For only 2 people in the house it gets the job done in general.

I recently had a service tech out to repair my dishwasher. Before I knew it, he was opening the unit and found a tube looking piece stuck in the unit. He was at my house for 15 minutes and the bill was over $250. He should have asked if I was okay with the procedure he was going to perform and the cost before proceeding. To make matters worse, the dishwasher is not cleaning dishes now. I sent a prior email to GE a couple of weeks ago with no response. I would have never spent this money if I had been given the option and certainly now I have been charged for a repair that actually made my unit worse than before since it is not cleaning the dishes like it did before the repair. I respectfully requested that my money be refunded and/or be given a credit towards the purchase of a GE appliance and have received no response. I tried calling and have been on hold for over 30 minutes now with no one picking up, despite the fact that hold time stated estimated wait time was 5 minutes.

We have a GE built-in combination oven and microwave. The oven gets up to heat very quickly and bakes in less time than recipes call for baking. The microwave is an 1100 watt unit and performs equally well, and has for 29 years, Our cook top is a GE glass top unit, installed 11 years ago in a kitchen upgrade, performs equally well, though not quite as fast heating as our old gas unit but much cleaner and attractive. Have never required a service call on any of this equipment!

My experience with GE over range microwave oven (built in) as follows/ Unit Mod.JVM3160RF3SS. Ser.#GG248367A, this unit was produced April 2016. Review February 28, 2019, unit began to disconnect itself during normal use. This was done by way of throwing 15 amp breaker. New home with dedicated circuit = Yes. Online Problem shows indoor sensors interlocks not adjusted properly. Troubleshoot fee minimum $99 with parts estimate $250.00. We have been limping along for two months with frequent trips to basement resetting breaker, now the breaker trips when activated. Same thing happens on multiple circuits, via extension cord trial. Next step purchase NEW MICROWAVE that is not GE.

I have a 3 and a half year old GE Cafe Dishwasher which I paid over $1400 for and yesterday, when I ran it, I had a couple of cups melted when I opened it. This morning, I opened it to remove the remaining dishes. I closed the door to it and left for work. I did not run it again, just emptied it. My husband came home about an hour after I left to a house filled with smoke and the smell of melted plastic. He opened the dishwasher and found everything inside melted. The spinners, the silverware holder and all the plastic rack dividers were totally melted.Apparently, the heating element stuck on and overheated it. If he hadnt come home when he did, I believe our home would have caught fire. He said the whole kitchen was much hotter than the rest of the house. The service repair man said it cant be fixed because it got so hot it melted the seals in the motor. It was not a wiring problem with the house. It was a problem with the dishwasher itself. So now, I am out $1400 plus a house full of very toxic smelling smoke.

We purchased our microwave several years ago. It runs great and still looks great too. It was very reasonably priced which made it a great value. It has all the bells and whistles you would expect on a more expensive model.

Our new GE dishwasher is a disappointment. 1. There is water on the door after the dishes wash. 2. There is soap on the door after the dishes wash. 3. The silverware is often dirty after the dishes wash.I have observed the following: 1. The reason for the water is the silverware trays are made of plastic and do not dry. They should make them of coated wire like they used to. 2. The soap tray is often prevented from opening all the way by the silverware in the rack. They should re-design the bottom rack. 3. The silverware tray is too enclosed for good cleaning. It should be made of coated wire like they used to.

My GE microwave oven died after 4 years. And my GE washer died after 5 years. Never ever buy a GE appliance. The market agrees, because their quality issues might be the reason the company has not been able to sell their appliance division for several years now.

I purchased a General Electric model peb7226df1ww in 2013. It lasted two years, then failed. I replaced it and two years later the replacement failed. At least GE microwaves are reliable in that aspect. You can count on them to fail. I am convinced GE installs a delayed kill switch on their microwaves to help their revenue stream. This was the last GE appliance I will ever purchase.

Purchased a GE profile dishwasher two years ago. It stopped draining. After 4 service calls and $400 we had to buy a new dishwasher. Basically I threw $1000 down the drain. My recommendation is do not buy a GE dishwasher!!!

The GE microwave model CJES1290Ml01 does not get used much, maybe 15 minutes per week. I have not even used convection oven or broiler part, so we could say very gently used. Sparks and grinding noise out of the magnetron tube area started recently and there is no metal in the microwave. It arcs like there is metal. There are not enough miles on this equipment to need replacement, but it is too expensive to fix. Im not happy with Walmart GE product. Did they cheap it up?

Touchpad for CVM2072SM2SS stopped working. This touchpad has been creating issues for the last couple of years. Few reconnection of wires got it working for the last few times and now it is completely broke. GE is not ready to help with fixing the issue. It wants to sell me another microwave CVM1750SHSS which seems to have similar issues (also the plastic handle for those microwaves seems to fall apart due to heat). In fact, the reviews for the whole range of GE Cafe series seems to be pretty bad. GE is not owning up the design issues. Too bad!

I know this commonplace complaint, like thousands before me, will head straight into the wind because the world just works in this way: technical support and repairs works as a profit center for a corporation. My GE Profile microwave abruptly failed out of warranty after years of use. The cause was due to a wire burning up inside that had not been loosely connected, said the GE technician, so this was an issue of inadequate quality--not bad enough to cause the microwave to fail quickly but enough to cause failure over time.After taking the microwave out of the built-in cabinet, it only took the technician about 5-8 seconds to find and diagnose the problem, several minutes to get the right part (a wire) from the truck, and a couple of minutes to fix it. The labor charge was $121 for about 7 minutes of repair work, to be liberal with time. (This charge is separate from the charge to come to our home and diagnose the problem.) This prorates to over $1,000/hour for a basic wiring change, which I think is exorbitant. I understand that the technician is a highly trained individual, but this is already reflected in the high labor rate.According to GE, the cost to replace the built-in microwave, which came with a matching stainless steel frame would be $550 if we wanted the new microwave to match the frame at least (but not necessarily the oven, stove, etc.). This is the kind of cost you dont think about when you buy a new home built with matching appliances--well, I didnt. Companies like GE can rationalize all they want about all the overhead associated with servicing a repair call. I can certainly grant them some leeway, but in the end, charging an extra 8 times more an already high labor rate given the time needed to fix the problem is simply price gouging a consumer who has no good recourse. (This is why I pretty much avoid repairing anything, except for my car. Its almost never worth it.)I recently had an experience with an experienced plumber charging an hourly rate of $150, prorated by and rounded up to half-hour increments of work, regardless of difficulty of work. Repairing an appliance should work the same way, and my GE bill would have been halved. Because of such profiteering, I will not consider purchasing a GE appliance in the future. I pray that this microwave doesnt break down again in the coming years due to some other problem. It would be a lot less expensive to just buy a non-matching portable microwave then for $100-$150 than to keep up appearances.To be fair, the woman who fielded my service call was courteous and empathetic. Because the microwave apparently had an electrical burning problem, she previously waived the diagnosis fee. Otherwise, my simple repair would have run several hundred dollars, more than the cost of the microwave. However, she was unwilling to reduce the labor charge, so based on how strongly I felt ripped off, I give GE a star rating overall.

I live in a condominium building with approximately 105 units. We all had the same GE microwave installed in our units approximately five years ago (contractor-installed). I sent out a mass email to all of the owners to ask if they were having the same problems I was having my microwave, which was the touch panel will not accept commands. I received approximately 15 complaints from various homeowners with the same complaint.When I called GE to tell them the problem I was having with my microwave, they told me a technician would have to come out and diagnose the problem. The service call would be $99.95, and at that time the technician would let me know what the problem was and tell me the charge for the replacement part and labor cost. I told GE Customer Service that there were many people in my condo building who were having the same problem and I wanted to know why each homeowner should have to pay the initial $99.95 service call fee? The response was, That is our policy. To placate me, GE customer service said they would charge me the initial fee but I would receive a 25% discount for parts and labor.In the meantime, two or three other homeowners made service call appointments for their microwave oven with GE. One homeowner was given a fee for parts and labor, which would have been only slightly less than buying a new microwave and another homeowner was not given a labor cost. In both cases, the homeowners did not go forth with their repairs, because buying a new microwave was more cost effective.I want Consumer Affairs to know GE grossly mishandled this malfunction issue amongst a group of homeowners who own the same microwave. Secondly, I realize the microwave ovens are five years old, but GE should have some record regarding failing parts along with the life cycle of this product. Lastly, I want GE to be held accountable for not telling consumers a repair cost for certain issues. There should be a cost per hour, not cost per broken item.I kept records of all correspondence amongst the homeowners of my condominium building, so I will be of great assistance if you need further help from me. Product malfunction is a GE Profile Spacemaker 2.0 Model # JVM2070SK02.

Called in for my washing machine and got service on my dishwasher??? With a bill of $207. A scam. Please take my advice and never call GE.

I bought the GE dishwasher in the slate color, just after a colleague at work did - within a few weeks of each other. Hers has already been repaired twice and is still not working. Mine was installed last week - and did not work even one time. No water getting to it. Had the connection checked and installer confirmed the dishwasher was defective. Im sending it back and want nothing more to do with GE products. I wish I had seen/looked for these reviews before I bought it.

My husband and I replaced all the appliances in our new home 4 years ago with GE Profile double oven, cooktop and built in microwave. All the appliances are of poor quality and do not cook the way we are accustomed to. But the microwave has had a particularly bad history. Within one year, it completely quit working and we had to replace several fuses and a board. Over the past couple of months, the keypad continually quits working and we have to climb up on a stool, unplug the microwave to reset it. Only then will it work for us to heat something. However, the keypad does not accurately reflect the task we are trying to use. I have had many microwaves over the years and I have NEVER had to repair one before. This particular brand of microwave was produced in Malaysia in July 2008. Very, very poor quality. No resolve from GE or from Sears where we bought it. I am done with GE and with SEARS.

GE Profile Dishwasher Model GLD4400N10WW - This was the second GE dishwasher I have purchased and it will be the last. When guests come to my home, they ask whats wrong with my dishwasher when helping me in the kitchen. The racks are bubbled and there is a burn mark by the heating element from overheating. The dishes have always been too hot to unload afterwards that you have to leave the door open for ten minutes before touching them, or you will burn your hands. I purchased this dishwasher from Lowes on 2/23/2008 for $368.88. I see that there is a recall on the dishwasher now, and it is only worth a repair. Quite frankly, my dishwasher is all ruined inside and it needs more than just a new heating element. It isnt worth it to me. It is very noisy and sounds awful when I use it. I will not be putting any money into replacement parts at this point, and I am very disappointed with my purchase. A dishwasher should last more than 3.5 years. My dishwasher should be replaced for free, not just get a new element. My husband is a licensed builder and he will not be using GE either, after this experience. I am enclosing a photo of the burns.

The way you put bowls in this model doesnt allow for cleaning them completely. You must wash the bowls AFTER cleaning them in dishwasher. Waste of time & money. Capacity smaller, noise louder. Not good value.