On occasion, your washing machine may experience problems. And it’s good to have an idea of what may be causing your operating issues. Look at common Grundig washing machine problems and troubleshooting here.

The program won't start. This could be due to a supply problem related to voltage or water pressure.

Causing the machine to switch to self protection mode. Faulty wall sockets or sockets that have been switched off may be the culprit.

You'll need to get an electrician to double check for blown fuses and investigate the door interlock system.

Water won't drain. There are several reasons why this problem may occur. It could be that the drain hose is twisted or blocked, or the pump filter may be clogged. All sorts of objects can get trapped in the drain pump, from coins to small items of clothing. Your technician will drain your machine with an emergency drain hose if necessary.

Water leaks from underneath seals that are wearing or not connected properly to the water inlet hoses are likely to be the cause here.

Hoses also need to be tightly attached to the taps if the pump filter isn't fully closed. This will also give a water leak from the bottom of the machine.

The washing machine won't fill if the water inlet hose is kinked or the inlet filter is blocked. This won't let the machine fill with water. Another issue could be that the door is nor securely closed. If taps are closed, the water will be prevented from getting into the appliance.

The appliance is vibrating and noisy. When your washing machine is unstable, this will cause vibration as well as the machine leaning against something. Overloading the machine as well as under loading can also trigger distribution issues that lead to noise and vibration.

Transportation Safety bolts can also initiate shaking. The door won't open. The door lock may sometimes be activated by the level of water in the machine.

And will stay locked for two minutes after the programme has finished.

If the child lock continues to be engaged, there may be an issue with the mechanical part of the door mechanism.

The timer won't count down. This could be due to the heater not reaching the selected temperature, an automatic unbalanced load detection system fault, or the washing machine not taking in an adequate amount of water. All of these problems can be easily fixed by a trained engineer.

The machine goes into safety mode. Suppose the water intake keeps being disrupted and is accompanied by a safety message before switching off. This could be due to transit bolts on a brand new model not being removed.

Other safety warnings given at the beginning of the cycle could indicate an electrical fault.

Rubber seals melt after a high spin. This is obviously a manufacturing fault, especially when accompanied by an acrid smell and smoke.

This Grundig washing machine troubleshooting issue needs to be checked out by a qualified engineer.

Washing performance is poor. This could be due to an insufficient temperature being selected for the water hardness and the depth of laundry soiling.

Using the incorrect amount of detergent will also affect the results. This is not related to the operating procedures. Use the manufacturers guide to ensure the recommended amounts of detergents are used in conjunction with the correct temperature.
 

On occasion, your washing machine may experience problems. And it’s good to have an idea of what may be causing your operating issues. Look at common Grundig washing machine problems and troubleshooting here.

The program won't start. This could be due to a supply problem related to voltage or water pressure.

Causing the machine to switch to self protection mode. Faulty wall sockets or sockets that have been switched off may be the culprit.

You'll need to get an electrician to double check for blown fuses and investigate the door interlock system.

Water won't drain. There are several reasons why this problem may occur. It could be that the drain hose is twisted or blocked, or the pump filter may be clogged. All sorts of objects can get trapped in the drain pump, from coins to small items of clothing. Your technician will drain your machine with an emergency drain hose if necessary.

Water leaks from underneath seals that are wearing or not connected properly to the water inlet hoses are likely to be the cause here.

Hoses also need to be tightly attached to the taps if the pump filter isn't fully closed. This will also give a water leak from the bottom of the machine.

The washing machine won't fill if the water inlet hose is kinked or the inlet filter is blocked. This won't let the machine fill with water. Another issue could be that the door is nor securely closed. If taps are closed, the water will be prevented from getting into the appliance.

The appliance is vibrating and noisy. When your washing machine is unstable, this will cause vibration as well as the machine leaning against something. Overloading the machine as well as under loading can also trigger distribution issues that lead to noise and vibration.

Transportation Safety bolts can also initiate shaking. The door won't open. The door lock may sometimes be activated by the level of water in the machine.

And will stay locked for two minutes after the programme has finished.

If the child lock continues to be engaged, there may be an issue with the mechanical part of the door mechanism.

The timer won't count down. This could be due to the heater not reaching the selected temperature, an automatic unbalanced load detection system fault, or the washing machine not taking in an adequate amount of water. All of these problems can be easily fixed by a trained engineer.

The machine goes into safety mode. Suppose the water intake keeps being disrupted and is accompanied by a safety message before switching off. This could be due to transit bolts on a brand new model not being removed.

Other safety warnings given at the beginning of the cycle could indicate an electrical fault.

Rubber seals melt after a high spin. This is obviously a manufacturing fault, especially when accompanied by an acrid smell and smoke.

This Grundig washing machine troubleshooting issue needs to be checked out by a qualified engineer.

Washing performance is poor. This could be due to an insufficient temperature being selected for the water hardness and the depth of laundry soiling.

Using the incorrect amount of detergent will also affect the results. This is not related to the operating procedures. Use the manufacturers guide to ensure the recommended amounts of detergents are used in conjunction with the correct temperature.