I bought a JVM3670SK05 a little under two years ago. It is an above the cooktop vent-a-hood microwave. I believed I was buying a quality unit. Now everything is working, but there’s no heat! Even the cheap units from Walmart work longer than this expensive piece of crap! Now I either have to spend enough to buy a new hood for cooktop and new microwave or pay the same price and buy parts in hope that they will not go out again. Not really feeling lucky with the GE product.

GE Microwave Model WES1450DN1BB 1.4 Cubic Ft 1100 Watt - This product is absolute garbage! This product was manufactured in June 2010 and I purchased it in approximately in May of 2011. So after 13 months of moderate use, the unit no longer functions properly. Needless to say, the product is out of warranty by about a month, so I pretty much now have nothing more than an overweight paperweight.I wont bore you with all the details, but for the most part, the touch pad stopped working and if left plugged in, the microwave will start on its own and run for up to a minute before beeping incessantly. If I unplug the unit and plug it back in, Ill receive a different error message, and so on. I wont waste my time contacting GE, because from what I hear, they really dont give a damn!When I was young, you could by an American-made product and expect it to last for many years. However, ever since greedy corporate America decided to ship all our jobs overseas in the name of profits, I have yet to find any imported products that are worth a damn. Instead of one good American product that would last a lifetime, I now have to purchase the same imported piece of ** many times over to get the same longevity. Maybe this is what GE wants?Needless to say, GE has now been placed on my Do Not Buy list. I guess I will now buy from another major manufacturer to see if their foreign-made garbage is any better!

We bought our first new dish washer 2.5 months ago. It has never worked since we got it. Figured out it was the door. We have called SIX times to GE to have someone come fix it They told us that their systems were changed and that they would take care of this! No phone call back or anything. I finally had to called the service people my self. Whats the point on a warranty if your not going to help. I will never buy another product from GE again!! I am VERY disappointed in the service. If you say your going to take care of it and call me back, then take care of it.

While using GE dishwasher there is feeling of easiness with less efforts. Even kids can use at home while alone to keep their utensils clean. To learn clean habit from home is good for kids to be a gentlemen in society.

Touch pad on GE CAFE over the range microwave started failing within first 2-3 years. Now, 6 years later, it has completed failed. Repair part alone (not including service call) is almost $550.00. Pure junk...made in MALAYSIA!

My GE microwave also has paint peeling off the top inside and bottom with rust as well. And cannot be repaired but not one person has said they were sorry or even owned up that it is a fault in paint. This is disgusting to think about this stuff falling into your food!!! This is not safe at all and 10% off new unit is not nearly enough considering they are up to $3000.00 now for microwave/oven unit.GE does not stand behind their products and it shows!!!!

Bought a new GE over the range microwave in April 2021 and it broke/stopped heating July. They replaced the magnetron in September and its broken again a month later. Same issue and parts are out 2-3 months.

I know this commonplace complaint, like thousands before me, will head straight into the wind because the world just works in this way: technical support and repairs works as a profit center for a corporation. My GE Profile microwave abruptly failed out of warranty after years of use. The cause was due to a wire burning up inside that had not been loosely connected, said the GE technician, so this was an issue of inadequate quality--not bad enough to cause the microwave to fail quickly but enough to cause failure over time.After taking the microwave out of the built-in cabinet, it only took the technician about 5-8 seconds to find and diagnose the problem, several minutes to get the right part (a wire) from the truck, and a couple of minutes to fix it. The labor charge was $121 for about 7 minutes of repair work, to be liberal with time. (This charge is separate from the charge to come to our home and diagnose the problem.) This prorates to over $1,000/hour for a basic wiring change, which I think is exorbitant. I understand that the technician is a highly trained individual, but this is already reflected in the high labor rate.According to GE, the cost to replace the built-in microwave, which came with a matching stainless steel frame would be $550 if we wanted the new microwave to match the frame at least (but not necessarily the oven, stove, etc.). This is the kind of cost you dont think about when you buy a new home built with matching appliances--well, I didnt. Companies like GE can rationalize all they want about all the overhead associated with servicing a repair call. I can certainly grant them some leeway, but in the end, charging an extra 8 times more an already high labor rate given the time needed to fix the problem is simply price gouging a consumer who has no good recourse. (This is why I pretty much avoid repairing anything, except for my car. Its almost never worth it.)I recently had an experience with an experienced plumber charging an hourly rate of $150, prorated by and rounded up to half-hour increments of work, regardless of difficulty of work. Repairing an appliance should work the same way, and my GE bill would have been halved. Because of such profiteering, I will not consider purchasing a GE appliance in the future. I pray that this microwave doesnt break down again in the coming years due to some other problem. It would be a lot less expensive to just buy a non-matching portable microwave then for $100-$150 than to keep up appearances.To be fair, the woman who fielded my service call was courteous and empathetic. Because the microwave apparently had an electrical burning problem, she previously waived the diagnosis fee. Otherwise, my simple repair would have run several hundred dollars, more than the cost of the microwave. However, she was unwilling to reduce the labor charge, so based on how strongly I felt ripped off, I give GE a star rating overall.

I bought this microwave about 2 years ago (2011). Yesterday the microwave turned on by itself, I tried to stop it by hitting the clear button that didnt work so I had to unplug it. When I plugged it back in it seemed ok so I reset the clock but within minutes it started again, this time the key pad read key pad short-circuit and then went blank. I am glad I was home when it happened. I am now wondering if I should repair it or replace it.

Have a six-year-old GE Tall Tub Café dishwasher (model#GHDT168V00SS) I purchased at Home Depot in Denver. Also purchased a 5 Year Extended Warranty that I assumed was through GEs Extended Warranty Opportunity. The dishwasher suddenly began leaking and ruined our hardwood floors (I know, wood floors in kitchen not good; tell that to the builder). I called GEs customer care number and basically talked to a scripted robot. You dont have a warranty through GE, its a third-part insurer such as Assurant, I was told. Not worth repairing, and the warranty expired a few months ago. I know parts wear out, but for heavens sake, cant they build a dishwasher that doesnt leak from the bottom, underneath the unit, where water will seep unbeknownst to people, eventually destroying the floor? Guess not. So, no more GE appliances EVER. PERIOD! Switched to Samsung, LG and Maytag. Now, gotta spend a couple grand ($2K+) to repair the hardwood floor.

Our GE dishwasher cost $1,000. Reasons for not buying GE. 1. DOES NOT CLEAN DISHES. 2. Latch doesnt catch. 3. Rubber strip comes out. 4. GE customer service is useless. 5. Interior valve broke. Everyone w/ this model has same problems.

GE profile microwave TOUCH SCREEN pvm2070sm4ss - Almost new. Used properly. Touch screen failure. TOUCH SCREEN does not function properly making it almost impossible to use the microwave. This Common Problem should be a RECALL.........

We have GE Profile Quietpower 6 Dishwasher. We are the second owners of the home and did not buy it ourselves. But the dishwasher is no more than 3 years old. Our dishwasher also refused to turn off after it was done washing dishes, usually humming for hours afterward. One day, we came home and found that the whole house smelt of burnt plastic. Our dishwasher was burning hot and full of burnt plastic. It was off, so we unplugged it to make sure it would cool down. We dont expect any help from GE, but we will never buy GE ourselves. And we will make sure to tell our friends to never buy GE.

Since 2010, our 2006 GE 1.1 cu. ft. countertop microwave oven model # JES1136WL has had power failure problems. It began in our previous home and now in our next home. All of a sudden, Id check the panel and it would say PF, which means power failure. So, Id reset the clock and there it is, ready for the next usage. Over a year later, in our new home, as of yesterday, it will start and immediately cut off. Now, weve been using this microwave in the same plug since May and now its October. So, what happened? Today, Im looking for the users manual and have located it online. But it appears that the PDF GE has for it, the Adobe document, has a problem. So, Im going to check it on my laptop, as this is my PC. Thank God we only paid under $100 for it. On some of these consumer complaint stories, the person paid a great deal for theirs.

The key pad says it is shorted out and needs service. It turns on randomly. I unplug it and plug it back in and it will either say service needed, keypad shorted out’ or press clock .I dont use it much for microwave cooking. It came with the house we just bought and it only worked for 3 weeks before it started this mess. I could deal with it if it didnt beep all the time.

Soon after getting our new Cafe Microwave CVM2072SM3SS the control panel died. I called GE and power cycling got it going again. This is an over the stove microwave, so we were also told by GE not to use the right front burner without the fan on boost. The problem persisted from time to time and steadily got worse over our 5 years of ownership. Reading the internet this was a common problem known to GE but they took no action to contact owners. The panel is now dead and my only option, having tried the fixes on Youtube, is to invest money starting at $108 for an inspection or buy a new Microwave. My entire experience with this product has been a big disappointment as I also own a GE Cafe range, fridge, and dishwasher.

My GE DVM5140DN1BB Serial # ZS 902371B manufactured in December 2009 has stopped functioning. It looks and sounds like it is working but it will not heat. GE only guarantees their warranty for 1 year after the date of purchase. This should have been my first clue. For a fee, they will come look at it.Growing up we had an Amana Radar Range. My mom bought it in 1987. I replaced it so that I could save counter space and also that it would match my other kitchen appliances. I bought the GE microwave in May 2010. This product lasted for a total of 16 months. Ridiculous! In my opinion, big business companies no longer have to be held accountable for producing bad products. Money was lost but will never again be spent on a GE product.

Ive had this stainless steel GE Dishwasher model GDF645SMONES with the controls in the front for nearly a year. The dishwasher constantly comes on with the slightest accidental touch. However the buttons that control the cycle settings are extremely difficult to operate to cancel the lock or delay hours features. I have to literally bang on the buttons to get a response. My thumbs are now sore from the constant pushing to cancel that lock and delay features that came on accidentally. Once locked, good luck in canceling anything. Im so disgusted with this $600 dishwasher. Complaints to GE and the so-called warranty company that turned out to be one and the same, have fallen on deaf ears from the day I got it. Do yourself a huge favor, do NOT buy this dishwasher. Customer service is awful.

I bought my GE DISHWASHER many years ago. Only use once in a while because there are just 2 of us in the house and it takes too long to fill it, but when I do use it it work fine.

After having my Cafe Stovetop for about a year and a half, there was a electrical component malfunction. During this, smoke came out of the stovetop and it smelled of electrical burning. I sent a complaint to GE since several components were damaged. Knowing that the warranty was only for 1 year, there would be nothing they could do except sell me the parts.

Bought GE range microwave JVM3160DF3BB11/16 from Lowes. Tripped the breaker. Replaced the breaker with a new. Would immediately trip the breaker as soon as you pushed the start button. Last time it tripped the breaker oven went dead. Wont even light up. Junk. Do not buy made by Haier in China with the GE name on it.

We purchased our Adora over-the-stove microwave oven from Home Depot. The Adora brand is made exclusively for Home Depot and were sold on its special functions and value. Well now, 3 years later, this exclusive models glass fogs up when we use it. There are only 2 of us living at home. We use it maybe 4 or 5 times a day. A microwaves typical lifetime is 9 to 10 years. Also, by the way, when we turn on the fan to highest, it sounds like an express train hurtling through our kitchen. Our dog had a heart attack and died the first day we operated it. No he didnt. We dont even have a dog. But you get the picture.

Reasonably priced. I dont cook in the microwave, however, I use it everyday. It has an up to date look and will match any kitchen. The GE brand has been around for years and remained a reliable appliance my family has relied on.

My microwave is only 5 years old. It is burned out electronically. I would never buy another GE product. My GE Profile stove needs a $300 repair after 4 years.

Our GE Profile dishwasher turned itself on and overheated to the point that everything inside was completely melted. This has been happening with other models but mine PDW9900NBB is not on the recall list. This leads me to believe that there is a serious defect in GE dishwashers. Even more disappointing is the length of time one waits to talk to a customer representative. Whatever they decide to do, I have lost confidence in GE completely and do not want to replace this with another fire hazard. Bosch, here I come.

PDT845SMJES - I purchased the entire GE Profile series when we remodeled our kitchen in October 2016. The first time I started the dishwasher, it leaked out the bottom of the door. The store where I purchased it sent out a plumber who discovered the soap dispenser was missing the seal. Took a week to order and replace the seal. Worked fine for 5 weeks. Then, on December 17, 2016, it quit mid cycle and I got the leak detected error message. Now I am in dishwasher hell. The store where I bought it said they were too busy to come and check it, so they told me to call GEs customer service number. GE sent out a plumber from Iowa (I live in SD). He removed the bottom panel, to look underneath and decided it needed a new pump and also a new soap dispenser part. That was on back order, so I had to wait until January 11, 2017 for him to come back. When he pulled out the dishwasher to replace the pump, he discovered the tub was leaking along the left side. He said the unit could not be fixed and suggested I call the store where I originally purchased it. They agreed the unit could not be fixed and contacted GE and got me a case number and said GE would call me by the end of the week. Im still waiting for that call. Do NOT buy this model GE dishwasher. GE apparently doesnt stand behind its products and the stores that sell GE are helpless to do anything for you.

Very quiet and cleans a large volume of dishes. Love the silverware rack and the overall look of the dishwasher. Also great value for the money. Though we have only had for three years it has held up great.

My dishwasher does an excellent job - its a bit slow, but it gets the job done reliably. It is probably slow only because its old and somewhat tired...It does a great job cleaning off remains on dishes, which is not always the case. It doesnt fail me.

Over-the-range microwave failure (model JVM2052, manufactured Dec. 2010) was purchased and installed professionally in March 2011. Total cost is $546. First, the fan failed in about June 2012 and I thought I can live with this. In Sept. 2012, the unit failed, but the interior light and clock still work. I paid $97.00 for a service call from the dealer, and the tech said the power source failed(?). Estimated parts and labor for repair is $370. So, I will buy a new unit (not GE) and pay about $150 for delivery and installation and take away this GE unit. I live in Morris County, NJ and this is not a rural area! GE service rep whom I called said GE doesnt service this area and to look in the yellow pages for an authorized dealer. I called again and got the name and address of the president of GE Appliances, and I am going to write about this product.

I bought this dishwasher GLDT690TBB-00 on 05/12. Its not even 2 yrs old. I had some minor complaints about how hard it was to fit bowls, how the utensil rack wasnt easily accessible, how long the cycles took, how it had to be vented right after a cycle to keep clean dishes from smelling musty... But I was willing to put up with that. I spent about $700 new. The dishes did come out clean, if I stacked them properly. I only used it when full, about 2x/week, as I am an aging widow & live alone. It stopped functioning a few days ago. Control panel lit up, a little water came in, but no action with spray, etc. Called a local repair company today. They say the control panel is shorted out, and that in turn burned out the motor. The repair cost would have been $524.61. REALLY? Not doing that! Very disgusted. Ill never buy GE again. Last KitchenAid lasted 12 yrs, but as all the repair guys say: They dont make em like they used to! Too many bells & whistles. All I require is clean dishes, and for the appliance to do its job.

One of the most disgusting situations I have ever been in. I purchased a brand new home with all new GE appliances. I have since learned that a technician was sent out twice prior to our walk-through because the superintendent noticed the dishwasher wasnt working properly. I registered all my appliances online. The first time I used the dishwasher, it flooded the kitchen floor, causing the builder to have to repair baseboard and drywall. A technician came out and repaired it. I used it an additional two times and each time I did, it flooded my kitchen and a repairman came out. After the second time, I contacted GE customer care to open a case. The third time, I requested a new dishwasher and the customer care agent, Stephanie, stated that my new dishwasher was a discontinued model and so she suggested one that was a slight upgrade. I agreed to this change and she informed it would take approximately 24 hours to have it approved. I have since talked to seven different people at GE customer care. This was started when a company called Barlows Distributing showed up unannounced at my front door approximately hours after my discussion with GE. They said they were here to install my dishwasher. I was rather shocked, said the timing was impressive, and let them in the door. After they had drained the water standing in the then current dishwasher, they started to put in a replacement. I looked at the box and realized they were placing the same model in. I told them that was unacceptable, because according to GE, I was being approved for a different dishwasher. I then told the tech to stop installing it and called GE. GE had no idea where this dishwasher had come from. Then an unavailable number showed up on my cell phone and when I answered it, the woman spoke my first name and started talking about my dishwasher, stating the builder had ordered a new one. I asked her who she was twice and she would only tell me GE customer care and not her name. I have since learned her name was Julianna. She said that I had to take this dishwasher or I wouldnt have one at all. I took this as a threat. After spending countless hours on the phone with GE opening a case and discussing the issues, picking out an acceptable replacement, I was then told the builder made this decision. Not only was I thrown from person to person over a discontinued model, I was threatened, and further was told by the superintendent of construction that once the dishwasher was installed and we closed on the house, I had to handle all problems through GE. I own the dishwasher, not the builder. I registered the warranty, and I handled it through the proper channels. I feel I need an explicit apology from GE. One of their arms doesnt know what the other arm is doing. During this entire time, I had little use of my right hand and seven fractured vertebrae (for which I am permanently disabled) and had to physically wash 10 boxes of dishes that had been packed up due to our move and stand while doing it. GE has caused me property damage, stress, and severe physical pain, yet threatens me and yanks me from person to person.This is my house, my dishwasher, and this matter should have been handled directly with me, instead of inviting someone into my house that I had no connection to or knowledge of. The really sad thing is that I just purchased and had installed a $6500 water softener and reverse osmosis system for the whole house, manufactured by guess who...GE.

I wasted my whole day waiting for GE Technician to come. Nobody called me to let me know that they are not coming. I have to call them only for a Mr. ** to tell me that they had rescheduled the appointment for another one week without notifying me. Good job that GE APPLIANCES are doing. You remember the so called TOO BIG TO FAIL? It means, they can do whatever they want at whatever time or day they want. I dont have a vent in my house and that means I cant use the stove. Is this ridiculous or I am missing something here? Is it TOO BIG TO FAIL? Yes, I forgot that. I will be staying in a house with a new GE APPLIANCE that has not been working for the last one week and have to wait for another week. Mind you, this Appliance has been used only for barely a month. Is there anybody out there who is facing the same problem or its just me. If there is nobody going through the same experience, an excuse like there are no Technicians available to come to your place and do the job. If there is anybody out there who has trust in GE appliances like I did or even thinking of getting one. Be aware that you will be through what I am going through and there will be no technician available for another two weeks. Be ready to wait for they will reschedule your appointment without letting you know, why? Because theyre TOO BIG TO FAIL. What will you do? Wait until they decide to come, if theres a technician available. I just realized that GE means GO ELSEWHERE. Thanks GE for the good job.

Almost immediately after purchasing the GE microwave we started having problems with the circuit board. It is now totally on the blink after only 4 years. This was a high price appliance. Sometimes when setting the timer on 30 seconds, the microwave would still be running and after looking at the timer it would still have 4 or more minutes left to cook. This is a FIRE HAZARD! We have lost food from timer malfunctions. This is a product I would be afraid to purchase. I am wondering why cant there be recalls on these cheaply built defective microwaves since you read of the same malfunctions over and over. GOODBYE GE!

My GE Washing machine did everything it was supposed to do, especially in cleaning clothes and very few if any machine problems and they last years and years, mine was 15 years old. It kept surprising me because it ran so smoothly, truly cleaned my clothes and ran forever. The Dryer couldn't keep up with my old washer, had to buy a newer more expensive machine that couldn't dry at 8 years old. I loved my reliable GE washer.

Installed 07/06/2015 While I was asleep on 12/09/18 the oven appeared to start microwaving an empty oven on its own. When I came down 5 hours later the microwave had no power. I opened door and turntable had melted and glass had exploded. The ring under it was burnt and melted in one location. Top of cabinet on right side was hot. Then the internal circuit breaker restored itself and started some recovery process making odd noises sounded like the magnetron was trying to run since the top was getting hotter, after a minute the internal circuit breaker shut it down again. I then unplugged it. It appeared the magnetron started heating on its own and turntable did not rotate. All of the heat was concentrated at 12:00 edge of glass turntable. It also burnt the metal floor under that spot.

My microwave on the inside paint start peeling off. I have this appliance 2 years, it has slowly been peeling since that time and now it has completely peeled and rusted on the inside. This WAS a gift. The outside looks great, the inside is so bad. The serial # is LT914637B model JES1451DN1BB manufactured in 2010, Made in Malaysia. Be Louisville ky 40225. Does the united States make anything except make us pay taxes. This is a piece of mess. The last 2 years my husband he suffered with LLC. Now I got to deal with this. Poor workmanship. I want GE to give me my money for the MW or total replace it. Rate 0.

Purchased a GE Profile (oven and microwave unit) for over $3000.00 seven years ago. The protective coating on the interior of the microwave completely wore off down to the metal under the wheels of the turntable. GE calls this minor chipping (which it is not), advises to stop using the product, and offers a $100.00 off a new GE unit because they cannot fix it. The product should be recalled, just like Honda did when their Pilots were peeling.

I notice when cleaning the inside of the microwave that the coating on the top (ceiling) of the microwave has bubbled and cracked and there is a hole in the interior top coating. This unit is about 9 years old, and is a dual unit as the bottom is a convection oven with very little use. Im told I need to replace the microwave. I have never seen bubbled and cracked interior in many years of owning and using this type of appliance. The photo shows the defects in the lining coating. Im really upset about this.

We had purchased the first listed model of dishwasher (Model PTD7505SSF8SS) and installed it on Aug 27/16. It worked for a total of 13 days and broke down on Sept 9/16. After a good deal of phone tag - a technician looked at it and said no less than 3 internal components had failed, the unit needed to be replaced. We were without the unit from Sept 9/16 until Dec 23/17 when the new replacement unit (Model PTD845SSJOSS) was installed. It worked for a total of 20 days and broke down on Jan 12/17. More phone tag... Tech looked at it and found a number of issues (motherboard, door switch, etc...), in addition - it had been leaking water under the dishwasher for the time it was in service. (All 20 days! What a record!)When a dishwasher leaks upstairs... It doesnt go well for the drywall ceiling downstairs. (The rep at GE was cold and calculated informing me that is what insurance is for!) Im not sure that is what someone who spent $1,699.00 for a GE product (in good faith of a reputable product) expects to be told by the individual who has the ability to make things right? At any rate, this is what you can expect from the trained professionals at GE. When they finally got around to looking at my file... They decided to simply replace the motherboard in the hopes it will fix the leak also.I would have liked a refund at this point (not likely) so I requested yet another replacement (given the issue of water leaking), they absolutely refused. As of this date Feb 2/17 we are still without a dishwasher. Goes without saying - no more GE products will enter our home and I will share, with everyone I can, the caring and kind words of support I experienced from the top level at GE.

My microwave is 2 years old and stopped working on Thanksgiving Day. Customer service was very responsive to send out a repair person. There was a minimum $108 charge plus and time spent. It turned out to be a loose wire inside the machine and I was charged another $50 for him to tighten it. Machines should go longer than 2 years without a service call and I will buy the extended on any other GE I purchase.

After 6 month of leaking brand new dishwasher, 5 appointments of technicians that are lazy and lying on their reports, as well as have no clue what are they doing, with unreachable Case Manager and complete unprofessionalism. This is so far the worst experience in appliance purchase. DO NOT BUY GE APPLIANCES! DONT WASTE YOUR TIME & MONEY!

I purchased a GE Profile™ 2.1 Cu. Ft. Over-The-Range Sensor Microwave Oven and paid over $500. I have had it 3 years and in the first 6 months it broke. It was under warranty and the $400 fee (door replacement) was covered. Then it broke 1 1/2 years later and I received a quote for $200 in labor plus the cost of parts (no longer under warranty). When the repaid guy walked in the house he said, Oh, one of these. Is it the door? I said no, we already had the door replaced, but his comment was very telling that I purchased garbage. I fixed it myself for $10 - it was a fuse. Then it broke 2 weeks later and I believe it is the fuse again. I contacted GE because I believe I received a lemon and they are willing to give me parts at 50% and nothing more. This was the worst investment decision I ever made and I caution others to not purchase this microwave.

Ive had my microwave for 12 years. Ive never had any problems with the microwave since its purchase and very pleased. I dont plan on replacing until the microwave would stop operating or not pleasing in the kitchen.

We just had a Fire in our GE Microwave, Model # JVM1750SP1SS. Manufactured in August 2010. Purchased at Home Depot in December 2010 and installed January 2011. The right rear shelf hook caught fire while the microwave was in use. Luckily, we saw it in time... We are not sure who to complain to or tell about this. We went on GE.com to inform them of this issue and am waiting for a response. I see here that I am not alone. There is other info being shared on YouTube about this issue as well. GE better make good on this for me. Now I have to find my paperwork... Figure out who will remove this under cabinet installed oven and replace it. I am probably on my own here as it is 3 years old!!

GE GDF520PGDWW 24 white, full console dishwasher - Energy Star. I have had this dishwasher model since December 2014 and it has not drained consistently since the beginning either during the wash cycle or rinse cycle. GE has sent three different repair companies to replace the pump, the control panel, and ultimately the entire dishwasher, yet even the new dishwasher still does not drain consistently. Sometimes it drains and sometimes it doesnt. The GE-certified repairman was again here this morning and is again ordering a new pump. Counting the original pump, the previously replaced pump and the pump in the new unit, this would be the fourth pump. I tried to suggest the problem may not be the pump, but the repairman could not think of another possible issue. I do not recommend purchasing this dishwasher.

RCA RMW953-White 0.9 cu. feet Microwave, 900-watts, 10-power levels, end cooking signal, glass turntable, 6-one-touch cooking menus, speed and weight defrost, cook by weight. Bubbles obscure text. I wanted a white microwave with a door handle, .9 and fairly powerful. I was glad to have found this microwave. But I dont know if the hole was there before, or my teenagers or I inadvertently put a small hole in the plastic covering over the control panel outside the microwave (NOT meant to be removed, I asked support) but now its become a larger hole as air got underneath. I cannot read the button text. I tried to cover it with scotch tape and thats not working.I searched and found out this is a common problem with GE microwaves. The buttons are very close to the bottom and therefore, countertop, so if you have a utensil or plate or something that sits near the microwave, it might nick the plastic coating. I called GE support (in India) and they said since its under warranty, I can return it. However Id have to pay shipping costs. Fortunately, I bought this at Wal-Mart (I hate to support this store but it was the only place I could find this style) and they have an excellent return policy and there is no charge for shipping. It was easy to call and request a shipping label within the generous warranty period. You might save yourself the trouble of a return or be very careful to not put a small hole in the plastic coating. Again, this is not protective coating for shipping, this is a permanent coating to protect the buttons.

I had a GE dishwasher installed by the builder when I purchased my home. The dishwasher had a fire in the wiring harness for the energy save drying switch. The dishwasher was under warranty and was repaired by GE without issue, and they told me it was safe. About 2 years later, GE recalled the dishwasher for having started numerous fires throughout the country. As part of the recall program, GE offered incentives towards the purchase of a new dishwasher; however, unless you purchased another GE dishwasher, you received virtually nothing. I purchased the top of the line GE Triton performance plus dishwasher and had it professionally installed, and given my previous dishwashers history, I purchased an extended warranty from GE. This new allegedly top of the line dishwasher blew a hose and flooded my kitchen, causing several thousand dollars in damage to the floor / sub floor and ceiling below. GE was contacted, came out, and made a repair; and my damage claim was paid by GEs insurance carrier Electric insurance. Once again, 2 years later, this same dishwasher blew a hose and flooded my kitchen and downstairs. I contacted GE and found that my warranty had been sold by GE to an outside company named Assurant without my knowledge. They were unable to provide me with a service appointment for about 2 weeks and advised me not to touch anything until the damage was documented by a GE technician or my damage claim would be denied. I contacted GE customer service and explained the circumstances and that the water damage would need to be mitigated in order to prevent additional damage to my home. GE scheduled a sooner appointment, but they failed to show up. I called GE again; they rescheduled for the following day and failed to show again. GE was re-contacted, and they scheduled a third appointment with A&E, a GE affiliated outside repair service. This time, the technician arrived but was unable to do anything unless I made a cash payment to him, as GE failed to include my extended warranty information when they booked my appointment. I re-contacted GE, and the next available appointment date was more than two weeks away. I was concerned that the water damage would cause mold and create an electrical hazard due to wet wiring, and the water caused the laminate floor and sub floor in my kitchen and downstairs den to warp and buckle. I was forced to contact my homeowners insurance in order to get this damage addressed. GE has been unable to get anyone to my home to address the situation. In total, I have spent about 16 hours on the telephone remaining on hold an average of 1 to 1 1/2 hours for each call, only to be told there was nothing they could do or that no supervisor was available or authorized to do anything. Assurant advised me they would look into it and get back to me, but I have yet to receive a return call. GE corporate headquarters was contacted, and they were polite but unable to accomplish anything either. I am removing the appliance myself and having it replaced at my own expense with any brand other than GE. I would strongly urge anyone making an appliance purchase to choose another brand; GEs appliances, customer service, and repair service are all unreliable and well below standards based on the hundreds of dollars we spend on appliances. My decision to purchase a GE dishwasher has resulted in damage to my home in excess of $10,000.00 and an unbelievable amount of frustration and aggravation waiting for repair personnel that dont show and waiting on hold to speak to people who can do nothing for you. If I performed this badly at my job, I would have been fired a long time ago. Learn from my situation and dont buy GE!

Started at the front rack hook. My wife stopped the microwave immediately, luckily she was right in front of it when it happened. This is a serious condition that could destroy a kitchen or even the house. I will call GE Consumer hotline tomorrow.

In 2008, after waiting 30 years, we remodeled our kitchen using both a GE Range & GE OTR Microwave, model # JVM1850. Last week, it started making a loud noise when started and wont heat. From reading online it sounds like the magnetron went. Everything else, fan, turntable, lights inside and outside work, but wont heat. I called in for service to find that it would cost $89.95 to have them come out to diagnose it. Also read that a magnatron is between $150 - $200, and used to be warranted for 5 yrs. New GE microwaves only carry a 1 year total warranty. So they know they are supplying junk to us. Had to just bite the bullet and replace it. People cant afford for appliances to only last this long, at the price they are charging. I am not only upset at having to spend another $450 only 6 1/2 years later to replace a microwave that was lightly used, but GE has chosen to change the look as well, so it no longer will match the range it sits above. When I was remodeling, I read so much about matching appliances... not matched anymore. Totally disgusted.

We purchased a GE Profile dishwasher because our old one was recalled for fire hazard and we were offered a rebate on a new one, and told there was no fix for the old one. On the new Profile dishwasher, the water inlet valve stuck open and flooded our home. Tech said we may as well have had a hose on full blast all night. Word to the wise, do not turn your dishwasher on and go to bed or leave the house! 7 1/2 hours later we woke to a completely flooded downstairs. When we were researching whether or not there were other complaints on that model dishwasher, we noticed there had been a recall for fire hazard ON THE NEW DISHWASHER! Since this is located right under our bed, we were fortunate though not happy about the flood! We have exceeded the 40K mark in damages and the assessments and estimates are still coming in. We will never own another GE product, though we recently purchased a stove with a double oven which is thus far wonderful. GE has also recently been purchased by Electrolux. We chose a Bosch for our new dishwasher.

Bought all new General Electric Appliances in 2002. Dishwasher, Washing Machine, and Dryer replaced after 6 years. Handle on Advantium Microwave replaced twice at the cost of $50 for handle made of plastic? Today our house smelled like burning plastic which upon inspecting dishwasher, found the heating element was COOKING everything in dishwasher. Got so hot that is melted the silverware bin and anything plastic in dishwasher. Glad we were home to unplug unit which we could not reset the controller on door of unit. Consumer Product Safety Commission is aware of this incident and is VERY common complaint with this Manufacturer. I have been on hold for 30 minutes with GE consumer relations phone number 1-800-386-1215. Was told by automatic system wait time was going to be 5 minutes. Figured I would write complaint on here as well while holding...READ CONSUMER REPORTS and stay away for General Electric Products!!! Model Number is PDWF480P00SS. Serial number is GS734641B.

Month Long Dish Washer Installation from Hell (Try #3 the best).Install Try 1 (I took off work for): Oops, I ordered the wrong hose. I am going to have to come back next week to install. I will call you and set something up. (installer). Next week Friday: Hello is this GE Installation services Umm its Friday and the guy never called or showed up this week to install my dishwasher I just purchased??!? (me). We then set up a time for the following week. How unprofessional.Install Try 2 (I took off work for): Umm still didnt bring the right hose. Can you go to Home Depot for me and buy the right one and bring it back? (installer). Ahh No!?! This is your problem not mine. (me). Well I will have to come back then. (installer). You have to be kidding me. I have to take another day off work?!? (me). Finally he gets a guy to come with the correct hose. Umm, can I borrow a screw driver and some tools from you?(installer). You have to be kidding me, sure? (me). Installer proceeds to drop the sides and fumble around banging the pieces on my NEW floor. Finally getting it installed. It doesnt look right. Dont the feet raise up and shouldnt the dishwasher be flush to the cabinets????!? and it looks crooked?? (me). Nope. (installer). I file a complaint and the guy removes my $60 install fee and sends another team out to fix it.Install Try 3 (I took off work for): 3 guys come and re-install dishwasher worse than the guy before them. From the other room you hear banging around and Oops, I broke a screw etc... This is what happens afterwards. Umm the plastic backing and sides are showing. Its pushed out farther than it was from the first guy. It definitely is NOT supposed to look like that. Plus its loose??? (me). Best we can do. Bye. (install team). This doesnt seem right....(me). Oh no, its leaking!!!!!!!!!!!! (me). So I called a plumber to come ASAP as I said before its NEW wood floor. New Plumber NOT associated with GE or Home Depot (who I probably will be getting a nice bill for calling last minute) proceeds to fix my dishwasher for the next 4 hours...Here is a small list of problems: 1) its leaking; 2) the foot vibrated off; 3) screws broke off; 4) damage to hose; 5) bottom plate installed at angle not even remotely level; 6) scratched up floor and cabinets; 7) installed too far forward and too low. This is the list. So far we still are trying to figure out where it is leaking from and if the dishwasher even will work. Thank god I actually got a Professional this time unlike GE/Home Depots teams. I then called GE Install services 1-800-432-7167 again and this is what they had to say: We already refunded you the 60 dollars. There is nothing we can do but we will file your complaint. I called again to speak with a manager and after a long conversation, he gave me $62 off my order. -- And let me tell you that is not going to cover the cost of the plumber I just hired to fix your mess. Not to mention the 3 days off work I took. Irritated I hung up. I bought a fridge, cook top, and double oven with GE along with this dishwasher. I wish I hadnt given them my business. Apparently, I am supposed to call back if the dishwasher doesnt work when my plumber is done working on it. Oh I WILL be calling back, you can bet on it. As for now I just hope he finds the leak... Moral of the story is NEVER use the install services they offer. You are better off getting your own plumber from the start.

It works great. My microwave is a small white one that has the power to heat or make a dinner. I enjoy using it. I just press how much time I need and the microwave turns on and it either warms up my meal or cooks it.

GE Model WES1130DM2BB MFG APRIL 2011, bought Oct 2011 @ SAMs Club. Microwave continues to run after cook time and will not stop until unplugged! Service Dept offers a $25 discount on a new GE Microwave after cutting cord & sending info plate in. I am concerned this microwave will cause a fire! Luckily I was near and unplugged it!

My dishwasher is very quiet and effective in its use. I am very pleased with my unit as I saves water and power when in use. It also cleans very well and smells good as it drains completely. General Electric is very reliable and outstanding company and is made in the USA.

I bought a GE Adora dishwasher from Home Depot. There is nothing technically wrong with it - in other words - it is not malfunctioning. It is just that its normal operation is AWFUL, in my opinion. The PROS: it is very quiet. The CONS: it does not clean your dishes! And since this is the primary function of a dishwasher - I would say it is a complete failure. Originally, I had hard water, and I thought that was probably the issue. I purchased a whole home Kinetico system, which remove almost all particulates from the water, and makes bottled-water-quality drinking water. (On a side-note, I would TOTALLY recommend the Kinetico system!) But even after having the water issues fixed, the dishwasher has NEVER worked properly. I have used every type of dishwasher detergent, including Cascade Complete & Platinum, Finish Ultra & Quantum Powerball... and I have also added rinse agents etc. Basically - whatever state your dishes are in when you put them IN the dishwasher, they will only be slightly improved when you remove them. Even if you SOAK the dishes first, they come out with all kinds of residue. It does an especially horrible job on glassware, but silverware is also terrible. And I have to re-wash by hand every coffee cup that comes out. I truly loathe this machine, and will replace as soon as I do enough research about a better brand & model.

We remodeled our kitchen and bought full line of GE café appliances which we have not been happy. Microwave screen cracked in the first three months; refrigerator is at max cooling but still does not cool or freeze enough; dishwasher has never cleaned well and marks my dishes with gray streaks and its control panel quit working and had to be replaced. They said that it was my soap, water etc., even though it never happened with previous dishwasher. All this in the first ten months of ownership of a couple with no family at home. Servicemen were nice and polite but their products are crummy. Dont buy them.

My dishwasher is a little over 3 months old. Sure its quiet. But I use the heat dry always, but it doesnt dry the top bottom or side walls and it stinks and a lot of food is sitting on the strainer and stinks. I have owned a GE dishwasher for over 25 Years and have never had one that was not completely dry at end of cycle. I have to hand dry my silverware. My Model Number is GDF510PSD4SS Serial number is FF736760B. I want a full refund and take back this reject. I will buy something else, I assure you it will not be a GE Product. Sign me, thoroughly disgusted with this Ge product.

Our microwave (GE model JEs1655DR1BB) is only a couple of years old (if that). Today, my teenage son went to make microwave popcorn and the microwave made the most horrendous noise and started sparking behind the panel on the side. It lit up the entire room. I went and checked to make sure there wasnt something foreign in it (there wasnt) and stupid me thought maybe it was the popcorn so I tried a bowl of water. It did the same thing again. I am just thankful it didnt start an actual fire, but I am furious!

Had to purchase new oven. General Electric appliances are JUNK.

This machine washes glasses sparkling clean with the use of a rinse additive. I like the fact that it has a top, middle and bottom spray blade; it has a moveable silverware bucket; it is very quiet; it provides that you can wash the upper level separate from the lower level. It seems to make use of the maximum amount of space inside. The appearance is sleek and modern. During the first few washes there is a distinct heated rubber smell that emits from the machine; however, this should dissipate completely by the fourth, fifth or sixth wash.

Does not hold as many dishes, pots and pan as my previous dishwasher. In the bottom rack I cannot place plates and bowls side by side. Rack is too small and the gray interior is too dark. And the top rack does not hold the glasses in place, already had one break.

I recently purchased a GDT696SSFSS Serial #SWGF800933C GE dishwasher. From the moment I tried to use it there was a leaking water to the floor from the back wall. I contacted the store that referred me to GE stating that their role ended when we received the dishwasher (long story..). I called GE service and when they came the technician said needs seal mat and offered to repair (the dishwasher has been installed in the garage since the water that comes out flood the kitchen floor and we cant afford having the floor damaged). But I had no faith whatsoever in this dishwasher (I was told if the problem happen again and damage my floor they will only offer to repair the dishwasher and I have to go to the insurance to repair my floor) or GE and said I wanted my money back. They did not even offered a replacement. It is still a brand new machine, I never use it.

We have a five-year old GE Profile Microwave that has an LCD panel. It is a nice feature, but it has become unresponsive to touch and now will cost us $500 to replace the LCD panel. We will just buy a KitchenAid instead. The LCD panel is not sealed, so when you cook, even using the exhaust fan, the moisture gets up in there and damages the panel. This is such a terrible design. We paid $600 for this microwave thinking it is a good quality appliance. Never buy GE! I was in Best Buy yesterday and told people who were there looking at microwaves. Terrible quality! We have to purchase a whole new microwave hood range now.

I have purchased a GE microwave/convection oven 7 months ago. A month ago, the control panel broke down and it would not turn on. I called up customer service and a technician was sent after a week. They have diagnosed it and the motherboard needed to be replaced. The said part was ordered and I was told it would be delivered in 2-3 days and a service will be scheduled in a week. A week came and no parts showed up. I have called up customer advocate and they assured me the said part will be delivered in time for the service appointment.Unfortunately, when they came, the said parts have not been delivered and I was given the lame excuse of systems failure; the request has not gone through their system. So the technician assured me that he will put in an overnight request for the said parts and the oven could be fixed within the week. He even gave me his work and cell number for me to call if I have any inquiries. But he never picks up or even returns my calls. So another service appointment was scheduled and parts were delivered, only to find out that it was the wrong parts, supposedly for another customer and for a different microwave model.Its really frustrating when people keep on reassuring that they are going to get it done, but has done nothing but lip service. Its been over a month and my microwave is still a broken microwave. I have learned my lesson and will never again in my life time purchase a GE appliance. PS: I should have listened to the Home Depot guy that sold me this microwave.

Our GE microwave is 20 years old and still works great! Still looks pretty good too!! We do have a small crack and the start button is worn, however, we use it several times daily. Would definitely buy this brand again.

Weve had our new over the stove microwave (GE Profile Microwave Oven PVM2170SR1SS) just over one year and the oven light went out. The owners manual has no information about how to replace the light. I called GE customer assistance office and they said it requires a technician to come to the house to replace the bulb. A service call would cost around $95 minimum. This is a ridiculous requirement to make consumers do a service call for an oven light. The owners manual does show how to replace the charcoal air filter, if you use one, by removing the plastic cover across the top of the oven with the door open. Guess what? I removed the two screws holding the plastic cover and sure enough, there was also the access to the cover to access the oven light. You just remove the one screw and the small cover plate can be removed! Be sure to turn off the power to the oven before removing the small 50w Halogen G8 light bulb (Home Depot $5.00). My complaint about GE is that they do not give the homeowner information about replacing this oven light, but instead require you to pay for a service call. The irony is that the owners manual tells you how to access the filter by removing the plastic grill and thats how you also access the panel to replace the oven light bulb. They also tell you how to replace the light bulb that provides light to your range, so it cant be a safety issue about replacing light bulbs. Requiring the consumer to request a service call for $95 just to replace the oven light, when GE could have easily put the procedure in the owners manual, is a real consumer ripoff!

As a landlord I have about 20 GE microwaves. I have had 8 handles break off in the last few years including the one in my house with me pulling the door open. Standing straight in front of it, just pulling regularly. Replacement plastic handles - just two pieces of injection molded plastic - selling from other companies for as little as $10 are $130.00. $130.00! There is a clear design defect here and the companys solution to it is to charge $130 for the plastic replacement part. Someone should go to jail. Literally. Please include me in the class action lawsuit.

I purchased a microwave in Oct 2010. It went blank and nothing works. I checked to see if its receiving power. The power is okay. I purchased the microwave, fridge and stove at the same time. I always had confidence in GE products. Microwave should have lasted longer than less than 2 years. I didnt purchase extended warranty because of GEs reputation. Very dissatisfied customer.

I have an above the range GE microwave oven, model no. JVM1750M1CC. It has been in service for about 9 years. About 6 months ago it stopped working with an F3 code. The code claims the control panel needs to be replaced. I found that the price of the control panel was over $100 and the service call was at least $100. A little shopping around and I found I can purchase a new oven for about the same price. As the control panel is located just above the largest burner where water is usually heated to a boil, it receives a lot of steam. I visited a local church second hand store and purchased a countertop microwave and used it while I found a good solution. I decided to let it dry out for a few days and lo and behold it worked again. Unfortunately it only worked for a few hours, sometimes a full day and then I needed to let it dry out some more. I purchased an extension cord with an on/off switch and hooked it up. Now I can stop the electricity without having to climb up on a chair to pull the plug. Once I was set up with the easy on/off switch I could easily reset it. After about a week of resetting, it got the message. It has been working properly for over two weeks now with no failures.

I purchased this dishwasher (GE Dishwasher Model # PDWT180RSS) at the beginning of March and it has been nothing but a disappointment and inconvenience. Nothing gets clean. It has been serviced 5 times and I have a case # with GE. They have serviced the jets, used 3 different kinds of dish soap, checked the water pressure, temperature, and drain and still it does not work right! What a hunk of junk. Dont buy GE products.

My dishwasher came with the home when we purchased it, and we did not see any good reason to replace it. It is a standard model, with a nice stainless steel interior. We have had no problems with it and plan to use it until it fails. I would like to have the upgrade model in a new home. This one does a good job washing the dishes.

We purchased a new General Electric (GE) Adora microwave model DVM1850SM4SS from Home Depot for approximately $355.00 in 2010. It was manufactured in Malaysia and had been in use for 2 years and 9 months before the magnetron failed. I spoke with a GE Customer Care representative on two occasions, and she said that the best that GE could do was split the cost of parts and labor since the 1 year warranty had expired. We had not purchased the extended warranty believing at the time that a microwave generally lasts for many years, and GE had always made quality products and would stand behind them. I indicated that I wanted to have the problem properly diagnosed by the service rep recommended by GE before proceeding further. The 10-minute service call bill set us back approx. $100.00. It would cost at least another $170 to replace the magnetron if we used the service tech contracted by GE. For $270, I believe we could find a fairly nice new microwave. I looked at alternative options for repair or replacement, since I am rather partial to the looks of the over the range stainless steel Adora. The model we have is no longer manufactured, but GE now offers the 1.9 cu. ft. Adora that Home Depot sells for around $400.00. In my internet research, I noted several postings that indicated that due to the high voltage danger of the magnetron, only trained technicians should attempt repairs. After half a dozen calls, I fortunately learned of a Microwave Service Center close to our residence that could replace the magnetron. After taking it down from above the range, hauling it in for repair and paying the approx. $104.00 bill and hauling it back to our residence to mount on the wall, we have a microwave that should work for a while! Total cost including service call for diagnosis - $204.00. Considering that GE does not wish to stand behind the quality of their products, I would not be likely to purchase a GE product again.

Have had dishwasher for 3 years and it quit working. Had appliance repair people out 3 times and they replaced every circuit board and harness in dishwasher as per GE and still doesnt work. GE own techncians dont even know how to fix it. So I am replacing it! No more GE appliances for me!

When we bought our house we upgraded our GE appliances to stainless steel. I had no problems with the dishwasher until a few days ago. Then it stopped working completely. As with most of the complaints I have read the control panel was not working. We took the front door apart just to see if the dishwasher was worth salvaging or should we buy a new one. A screw was NEVER installed on the vent assembly to hold it in place. The entire inside if the door was corroded by steam and/or water. So every wash slowly degrading the electronics. 18 months, 6 months past its warranty where now its out of their hands and you can pay $89 to have someone just look at it. We were lucky it just broke because this hidden mistake on their part could have not only caused a short circuit but a fire. Like so many of the other stories. I will not buy GE again.

I had a problem with my GE Profile Dishwasher that I had for several years and I had it on factory warranty. However, the last time they came to repair, they did not have parts available to fix anymore. So, they recommended new one. I worked with Consumer dept and made arrangements to replace with one they recommended at $500+. After several efforts to get it delivered, it was and we began using. It is not a Profile like my old one and it does not have the additional washing, rinsing and drying cycles as the Profile. It is a flat out bottom line washer. No, sani clean etc.. We have used the machine about 4 times and each time we have to rewash several of the dishes and especially the silverware. This is the most disgusting piece of equipment I have ever used. My home is loaded with GE products from years ago, mostly the Profile series and I have been delighted with the products and service. This machine is a disaster. I cannot believe that GE has this on the market or maybe this is a machine they use to satisfy customers who may threaten to use someone elses. It was not free, as I say it cost over $500. The stores and onlines advertise better machines on sale for less. I have GE stock which I will sell. They are going down on Quality. Consequences: Stuck with poor machine that does not do job that I paid good money for. Really, GE, get yourself together. Product Model:GDF510PSD1SS.

GE Microwave Model JES1139BLO3, Serial # VS904116B - The above model was purchased at Lowe’s in Ventura, CA about a year and a half ago. In that time, the white coating on the inside of the microwave has been deteriorating, beginning with the area under the turntable and extending out to the bottom and sides of the unit. I am concerned that our food will be contaminated by the particles that are coming off or that there will be a fire caused by the microwaves hitting on the uncoated metal. I do not plan to ever purchase another GE microwave.

Remodeled our kitchen back 6-7 years ago and bought GE Profile appliances from Home Depot... bad mistake. The microwave/convection oven came as one unit and now due to paint peeling on the microwave interior - inside top and sides we need to replace the entire unit to the tune of $2,500 plus. I called Home Depot and asked if there was a government mandated recall on the item... and they asked if we purchased the extended warranty. What? Does anyone know of a recall or class action suit on the following item: GE Profile Model: PT970SMISS. Manufactured December 2007.

I purchased the GE Spacemaker over the range microwave in 2006. It lasted 5 years with little use. It was the magnetron. It seemed to work fine, but wouldnt heat food. GE gave me a hard time to have the part shipped to me and said I would need GE, who charged $99 for just a visit, to install. I will never buy GE again. Products dont last and GE doesnt care to keep customers.

GE microwave turns on by itself, creating a fire hazard. We could not figure out how our plastic plates melted, until we witnessed the GE microwave turning itself on by itself. Also filed a report with saferproducts.gov. It may have to take a death of a human to have this dangerous product recalled by GE. Great business plan, GE!

I purchased a GE microwave from Best Buy about a year ago. Every time I wipe it clean, white paint chips come off the inside. This cannot be safe for me or my children. I did contact the company and they were of no help at all. They said that because I heat up liquids in the microwave, this will happen. Duh! I would not recommend purchasing a GE product of any kind (oven, fridge, etc). Their customer service is awful and their products do not last.

Slightly more than one year, I purchased a model GLD4404RCC dishwasher about which I have made complaints in the past, concerning poor washing performance and which you chose to ignore beyond attempting to tell me how to use it. Now, this Chinese-made piece of junk has begun to give different problems. Upon completion of the wash cycle, it starts to make a lot of noise and will not shut down. I must do this manually. Guess what? It has waited less than two weeks after the purchase date to do this, meaning it is out of warranty. We have just purchased a new home and will be needing new appliances such as dishwasher, refrigerator, washer and dryer, and a water heater. It will not be GE. I shall never purchase any more of GE products as the whole company stinks.

Model #JVM1790SK01. High end GE Profile microwave/convection oven. Purchased and installed in 2009. First off the exhaust fan is terrible and is very noisy. The product itself worked well until recently when now the microwave heats intermittently, one time it will come on and heat, next time nothing. The fan runs, but no heating. The truly frustrating part is I need the front venting and no other units have the vents that blow the air outward, all the new units blow the air straight up your cabinets. Certainly a high end unit should last longer than 5 years with only two adults using it now and then. The cost of the service is outrageous and I surely would not use the $100 rebate on another GE product if they do not last any better than this one.

July 4th, 2010 - GE Profile Dishwasher, Model: PDW9200N00BB, Dishwasher had been humming after cycle was over for a little while, this night I walk into the kitchen late and find it full of smoke. Circuit board has a hole burned though it and wiring harness is melted. Never tripped any safety, could close the door and it would come right back on, smoke and all. This model was not on the recall list but I called GE anyway. After describing the fire they send someone out, then they send a new dishwasher out and install it. I assume they wanted the old one to look over or just to get rid of it. New washer installed the end of July 2010, new model number PDWT500R10BB. Today is 2012-02-02 and the new machine would not stop at end of cycle (Got down to 1 minute and stay there for at least 20 minutes before we turned it off). This machine is now making the continuous hum after the cycle stops that the old one did before it caught on fire.Called GE, they said they could maybe go half on parts and service until they checked where I was located. (Wichita, KS. Area population 500,000+) They said that they didnt send factory techs to my area and I would need to contact a local repair service. I pointed out that they had a factory guy for when my machine was on fire and they said it was just a malfunction now, so they could not. No half on the price for repair either at this point. This is a $1100 to $1200 dishwasher with, as near as I can tell from complaints online, a history of going up in flames. I understand things break etc, but when you continue to put out products like this and then refuse to remedy the problem, I and anyone who will listened to me will never own anything GE again.

I am rating my over the counter GE microwave model no. JVM3160RFSS. Ive had it for over 2 years and its still performing well. Pros: Solid feel, sturdy door mechanism, easy to clean interior, attractive design, fairly quiet, adequate lighting inside, reasonable price, fan works okay for moderate smoke, short reheating times for lighter fare, cooks frozen foods quickly. The integrity of the interior is good with no chipping or cracking. Cons: Fan is inadequate for heavy smoke if searing beef, hot and cold spots while reheating heavier foods such as mashed potatoes or casseroles, controls are hard to see in dim or moderate light. A suggestion to GE would be to make microwaves with optional backlit buttons to see at nighttime or in dim lighting. I like that GE manufactures most of their microwaves in the United States.

GE Profile Microwave/Convection Oven JVM1790WK, over the range unit, CAUGHT ON FIRE while microwaving water for coffee. One of the four prongs that holds the oven grid in place started flaming wildly and smoking after about one minute of microwaving. My whole kitchen has an acrid awful burning smell. This is my second unit for a small kitchen, and I will be lost without this. The first one I had the handle fell off. This one is too dangerous to use. These units cost $600!!! I cannot afford to replace one every few years. Maybe this model and brand is bad news?

It works really well and this price point is good. It’s lasted me a few years and it is still in new condition. It has a nice modern look also. Good microwave for a great value.

Very convenient. Easy to use. Take some time to clean though, have to cover all food for splatter of food on the topside inside of microwave, have scour off with strong pad. Also it is not radiation free for health. But the microwave is easy to lift. The best thing about it you can cook frozen foods. Like meatloaf, beef stew my favorite, pizza, chicken.

Not even a year after purchase of new cafe series dishwasher, stainless lining rusting. Service called, GE tech agrees rusting of lining, GE warranty says not under warranty. Ive replaced screws that show signs of rust with aftermarket stainless screws. Cafe oven has had three front knobs just fall off - two were repaired under warranty and had to purchase extended warranty on third because it was more cost effective. Cafe Refrigerator had drain plate in back of unit completely rust away, tech knew what problem was before he stepped foot in my kitchen, he told us this was common. He caulked some sensor inside fridge box during service, I asked why, his response was its a design flaw and unit will operate better with this modification. Oh and redesign the ice dispenser, its tilted towards the back of the freezer and the ice is dispensed out the front.

Update 4/14. GE finally conceded that the dishwasher is indeed broken last week, and set up a replacement unit to be delivered and installed. The company that delivered the new unit would not install it of course...why would they? So, we had to hire another place to install it. GE is supposed to reimburse us for the extra installation expense. Im glad it is finally resolved, but man, oh man...what a headache.

GE is a very reliable name brand with history to back it up. I’ve used their washing machines for years and only changed out once due to newer features. I had Thebes first washer for at least 10 years, maybe a little more. It only needed one part replaced, that was the capacitor, otherwise it was still usable. I am not an in depth handy person but I will read and do my research and found directions doable. Additionally, I found the service help desk very informative and that’s how I discovered it was the capacitor that had gone bad after washing clothes for so many years, and believe me, I did a lot of cycles with my kids and family. I feel I got more than my money's worth. Lastly, I’m still using their products to this day. I may not have the frequency because we are empty nesters but I still believe in their products,

The GE MICROWAVE MODEL JVM6175EF1ES was manufactured in August 2015. I purchased it in November of 2015, brand new from Home Depot. It was not installed until April 2016. So less than 2 years after installation it malfunctioned. (The unit brand new only has a 1 year warranty). The parts the tech replaced have a 5 year warranty. That demonstrates to me that GE does not have a lot of faith in their appliances. Aside from that I paid $375 for the repair, thats almost the price of a new microwave. But I paid since it made more sense to have a 5 year warranty on the parts instead of a 1 year with a brand new unit. I WILL NOT be buying GE products in the future due to this product defect.

We have the dishwasher, fridge and stove from the GE Cafe series. In the 2 years that we have had them, we have become pretty acquainted with the local repair people because there hasnt been one month when all three were working at the same time. The fridge had to be replaced (we lost over $1000 in just food) - the replacement fridge had to be repaired. The customer service is awful. They are just trained NOT to be helpful. GE takes no responsibility for putting out such low quality, high priced appliances. I will never buy GE again and hopefully these reviews can save you the same grief and hopefully money (we have to pay for service repairs). Buy anything but GE, one star - is one too many!

Very easy to load. Controls are easy to read. Very quiet operating and does an excellent job cleaning utensils and all pot and pans. Have used for 8 years with no issues.

Have used GE dishwashers before - were good. However GE no longer makes them, its just a name - now made by MABE (part of HAIER), Mexican with Chinese ownership, and this new one arrived with a factory fault - cracked tub which leaked immediately. Cracked tub seam and leak found immediately by service tech GEs site referred. Good news is the leak detector worked! Bad news - is we didnt install it right away (old one still worked and pandemic...) so it was a year before we got to it (was partly a gift). So - now MFR Mabe is giving us the run around and so far not doing anything about the faulty dishwasher they mfd and shipped through Home Depot. Dont be fooled as we were - GE is not actually GE anymore and the mfr HAIER/MABE are doing nothing to correct a factory mfg fault.

My GE over the range Microwave has broken about 4 times in a years time. My warranty company American Home Shield (AHS) has decided that instead of replacing this piece of garbage, its somehow worth it to keep on fixing it, which is apparently their MO for all their customers but I digress. After the latest breakdown (microwave lost power completely), I was referred by AHS to GE Appliance repair. Thus began the nightmare. The tech that showed up was incompetent at best. He showed up, looked at me, made a grouchy face and proceeded to walk in the kitchen with an attitude like he was doing us this massive favor. He opened the microwave door, closed it, opened his computer and ordered 10 (yes 10) different part. Again, he literally just opened and closed the door - did not disassemble to see what part was actually messed up. No diagnosis done of any kind. He scheduled to come out the week after that - didnt show up because I missed his phone call. Btw, I called him back pretty immediately and he didnt pick up. After being on hold for about 35 mins (which is clearly the GE standard hold time), they tell me the guy has left the area and they need to reschedule me for a week later. The day before the 2nd appointment, they called to reconfirm and then the morning of, I called, stayed on the standard 35-40 min hold and reconfirmed he was still coming and was told he was on his way. Well, the appointment time came and went and he failed to show up YET again so I called to ask wtf happened. They said he didnt come because I canceled the appointment thru an automated call. This time the idiot didnt call me like they always do. I asked for proof of this alleged automated call that was placed to me and they said no call record exist and so while it seemed like a system glitch, the tech already left the area and theyd need to reschedule it. I told them, No, thank you. Got a local repair company to come out the very next day. Turns out, out of the 10 parts that idiot tech had ordered, only 4 had arrived while the invoice still showed 10 being shipped. Let me clarify this: All these issues stem from GEs entire company: From manufacturing crappy products to HR hiring incompetent techs to customer service being absolutely nightmarish to supply chain not sending parts that are being ordered. And if you can somehow get their alleged consumer advocate department on the phone after a 40 min hold time, they dont give a crap either. All these employees MUST hate GE to drive customers away as far as possible. I own a business and I will never ever EVER buy GE again.

I have two of these in my kitchen, just about 3 years old. They have NEVER dried the dishes and I have ALWAYS had to thoroughly wash the dishes because otherwise they dont get clean. One has completely quit working now.

Had to order filter separately. No one said anything about filter not included. So it holds up the whole installation process. So now we wait! Not Best Buys fault unless it is supposed to be mentioned. Last microwave we bought, filter was included, twelve years ago.

My Microwave that is four years old suddenly wont heat anymore. It still runs but there is no heat. They told me its out of warrantee already. The repairman says its the magnetron and it costs $600 to replace! The oven microwave combo unit is $1500 altogether to replace. I bought another Walmart microwave for $47 and it works great! GE will not replace or fix it. They dont stand behind their products and are not helpful on the phone. I will never use a GE product again.

We just purchased a new home and moved in about a month ago. The builder would only put in GE appliances despite our protests. We had purchased another new home 2 years before with a new GE water softener and GE reverse osmosis system. In the 2 years we were there, we had service people over on multiple occasions because they never worked correctly. The common message from all the service people was that GE makes junk. Corporate designed garbage designed to last only as long as the warranty. Dealing with GE was always a nightmare with long waits and customer service that worked banker’s hours. In other words, GE does not stand behind its garbage.In any case, we just bought another new house and the signature series microwave (billed as the best they make) would start to run spontaneously and beep when nobody was near it. We had to shut off the power to it just to make sure our house did not burn down. We researched it on the web and determined the keypad was bad. We told them this when we called in the warranty. They took a week to send a technician who would only work banker’s hours and forced me to take a day off work. He gets here and tells me that he had just tested the microwave and learned the keypad was bad! Duh! He then proceeds to tell us that he did not bring a keypad and that he would have to order one that would be mailed to our house. We live on a new street which address is not recognized by FedEx so we told him he needed sent to himself. He refused. He assured us that we would get it. So, Friday 3:00 pm rolls around and no part shows up so we call to find out what is going on. Mind you, I have already scheduled Monday off work at this point. They tell me that the part is back ordered and that they have no idea when they can ship it. Additionally, they have a wrong address for our house. We tell them the correct one and they tell us their computer does not recognize it. She cannot tell us when the part will be available. We tell her that this is unacceptable and that if they cannot replace the part, they need to replace the microwave. She says that is not her department and we have to call their customer department on Monday which is open from 8 to 5 pm Eastern time! We live on the West coast!!! That means they are only open until 2:00 my time and I have a job where I cannot make calls during the day. I can’t do it at lunch because the hold times are over an hour!!! I guess I have to get up at 5 or take the day off.When I tell people in the know about this, they just laugh and say, “whaddya expect!?!, its a GE!”. We have been about a month with a brand-new microwave that has never worked and GE is impossible to reach and has not even ordered the part!!! We are toying with the idea of just replacing the piece of junk with a product manufactured by a reputable company like Samsung or LG from a box store who will honor returns and take the home builder to small claims court. In any case DO NOT BUY GE PRODUCTS!!! You have been warned. They make cheap junk that never works right and play games so they dont have to honor their warranties. This is a New York Corporation run by people who do not care about customers, honor, or integrity. They make backdoor deals with shady homebuilders to peddle their junk exclusively and you will have to replace it in two years. Learn from our mistake in buying GE. They bring junky crap to life. Garbage Electric is what they should go by.