GE profile microwave convection - over the gas range. Oven temperature does not heat up more than the 370 degree, even if its set to maximum (450 degree). I purchased 4 ovens in the past year, all have the same defect.

I purchased a GE Profile dishwasher in June 2015. It was delivered dented.19 July it was replaced. The dishwasher worked for 3 months. Then it stopped working and the display panel had a LEAK DETECTED, DO NOT USE, notification. We contacted GE who could not find a GE repair technician to come and repair it in the entire BAY AREA. The dishwasher was bought at SEARS who refuses to take any responsibility.

One needs to be a contortionist to replace the under light bulbs on this microwave. It is a TERRIBLE design. Why werent the sockets placed so that the prong holes could be visible? One has to do a back-bend over the stove top and then the socket holes are still not visible. DO NOT BUY THIS MICROWAVE. DONT BUY THE STOVE EITHER. IT IS DANGEROUS. THE KNOBS TURN EASILY AND OPEN THE GAS.

My husband and I enjoyed our 1980s White GE Microwave and Stove/oven. But, after 15-20 years with the same appliances, we finally saved up for upgrades and purchased a new Stainless Steel (mid-range priced) GE Microwave and stove/Oven. I cannot begin to describe our disappointment. The Microwave is above our Stove/oven. Our old microwave had two powerful lights underneath it - one on each side. This microwave provides one small, weak light that does no good any time of day. Why would GE go from two great lights to one middle useless one? Also, the faint white numbers on the front keypad of the microwave are barely visible during the day - forget about seeing this when the light is not perfect. I foolishly assumed these numbers would be backlit on a black background. Onto the Stove/oven. The temperature is not accurate but that is something we can deal with. After the oven is pre-heated, the assigned temperature stays on the display pad - NOT the actual time. Who cares about the temperature you set the oven to - dont we all need to know when to check or take out our food? Our last oven always showed the time. We did not join the Stainless Steel bandwagon 10-15 years ago when others did - which we thought would be good for GE to get some kinks out. I Guess we should have waited 10 more. Proper lighting on your Microwave and The time on your stove/oven while cooking are not too much to ask for when we just dropped at least 2-thousand dollars!!!!!

We bought a GE dishwasher July of last year. In December it started to shut off some off minutes into the cycle. FOUR months this piece of junk has not been working. Three times someone has been here to say oh it should be working. They are sending someone out for a 4th time now. Should have already been replaced.

Purchased new home and bought GE Monogram package. Within 6 months dishwasher started leaking bottom of door. After five repair service calls. (Thats 10 times waiting for service man or for parts to be stalled). The final repair killed the dishwasher dead and GE replaced it with a new Monogram dishwasher. I thought all was working fine but then this new dishwasher developed a leak underneath and the sensor shut it down completely. Service call made to GE and a GE service man came, only he couldnt get to the leak area because he couldnt pull the dishwasher out because the connecting water hose was being stretched so tight he said he couldnt disconnect it because he couldnt see behind the unit or the drawers to see where it was hung up. Plus he is not authorized to install or reinstall dishwashers. So I call GE repair and now have spoken to the most uncaring, dis concerned case manager handling my account. He tells me that this now a installation problem and that even though GE delivered the dishwasher and installed it that because these were outside venders they (GE) were not responsible for the installation and dont know if they used GE standards to install it. So because the GE service man couldnt move the dishwasher I now needed to get a plumber to disconnect the dishwasher, find out what the problem is with the installation, coordinate a service call date with GE service to then come out and put in the parts, then have a plumber back in to install the dishwasher again. GE will reimburse me up to $125 for the plumbers work and I have to submit the plumbers invoice. No guarantee that a leak will happen again, because the GE service man cant even run a test on the replacement parts because the dishwasher isnt hooked up to water and he cant do that because he isnt authorized by GE to install. Oh, the dishwashers warranty ended on 10/10/2015. My service call went in three days before it was to expire so service is covered for the leak (or so I have been told). But what will breakdown next with this appliance? I bought GEs top of the line package. I bought a MADE IN USA appliance and I can honestly say that this GE appliance turned out to be unreliable, unrepairable and their case managers uncaring. I will never ever, ever buy another GE appliance. I will never recommend any GE appliances to anyone ever. My KitchenAid lasted for 26 years without a service call. When I remodeled my kitchen I purchased a Bosch dishwasher. That pleasure was 13 years old when we sold our home. We have been in this new home for 1-1/2 years and now on my second dishwasher with a future of many service calls ahead and very bad taste for GE. If this leak problem is not fixed or another problem arises, I will yank this dishwasher out and buy another brand. A reliable one and definitely not a General Electric EVER! Since this GE Monogram package was purchased at P.C. Richards they will also be notified of my displeasure and I will continue my discourse of GE forever for their lack of product truthfulness and quality, plus consumer disregard.

I bought the GE oven and microwave combination. After a pie dripped on the oven bottom we did a 4 hour self clean. The bottom of the oven is stained and it does not wipe up. Also noticed the door is not sealed and it has marks between the glass. There are also all sorts of stains on the interior of the door. This is a new stove installed 5 months ago.

We usually turn on the dishwasher in the night. Last month ours started smelling smoke in the morning 6:00 am. When checked, it was the dishwasher that melted couple of plastic cans and its own sprayer and other plastic parts (pictures speaks for itself). When checked with GE, this model was not under recall (there are other models with similar issues). They sent their technician, who confirmed that newer models has auto turnoff circuit. When I asked GE rep, both (level 1 and her manager) assured me that even though it shows its burnt from inside, it would have contained the fire inside, which I disagree. Even after seeing pics, their tech review and the whole incident, their engineers determined this is not a safety hazard to me or my family.

My GE dishwasher is just OK, I would say. It saves water and money. It is fairly efficient to load and pretty effective at washing on normal but many times I need to hand wash the big or hardened food off the dishes before loading, which feels like more work than should be necessary. Id rather not wash my dishes twice.

I was missing my wiring/ schematic diagram with my dishwasher and after spending hours on GE website to no avail I called the service center and was told they would send me an email that I would have to respond to and then they would email me a diagram in 8-10 business days. Email in 8-10 business days... WHAT!!!! I replaced the UI board after 2 1/2 years and the control board Fault code LED was blinking 7 times for a temperature sensor circuit has become inoperable. This is their fix; Disconnect the power at the circuit breaker for about 30 seconds and then reset the dishwasher. If the problem persists, contact service. No instructions on how to reset the dishwasher anywhere. American business at its best. Never GE again!

GE Dishwasher model #GDF610PSJ5SS stopped working (would not even turn on) a little over 3 months. Because it was purchased over a year ago for a spec home we purchased, GE would not honor the warranty even though we had only purchased the home 3 months prior. Repair, if possible, most likely would be more than buying a new one. Recommend avoiding GE products. This is our 5th home, never had problem with other brands in previous homes!

We purchased our GE Cafe stainless steel dishwasher in May of 2012. Periodically, it leaks around the bottom of the door. I have to put a plastic container on the floor to catch the water. This is bad enough and very disappointing, but the next and most important issue I have with it is the fact that it doesnt clean properly. I always, each and every load, rewash 3 to 4 items. The stainless handles also get very hot to the touch, which isnt very safe for a toddler. If I had the strength, Id pick it up and throw it out the back door. A dishwasher is designed to do one thing, wash dishes; its not a difficult concept. It is supposed to make life easier, not harder.

Weve had our new over the stove microwave (GE Profile Microwave Oven PVM2170SR1SS) just over one year and the oven light went out. The owners manual has no information about how to replace the light. I called GE customer assistance office and they said it requires a technician to come to the house to replace the bulb. A service call would cost around $95 minimum. This is a ridiculous requirement to make consumers do a service call for an oven light. The owners manual does show how to replace the charcoal air filter, if you use one, by removing the plastic cover across the top of the oven with the door open. Guess what? I removed the two screws holding the plastic cover and sure enough, there was also the access to the cover to access the oven light. You just remove the one screw and the small cover plate can be removed! Be sure to turn off the power to the oven before removing the small 50w Halogen G8 light bulb (Home Depot $5.00). My complaint about GE is that they do not give the homeowner information about replacing this oven light, but instead require you to pay for a service call. The irony is that the owners manual tells you how to access the filter by removing the plastic grill and thats how you also access the panel to replace the oven light bulb. They also tell you how to replace the light bulb that provides light to your range, so it cant be a safety issue about replacing light bulbs. Requiring the consumer to request a service call for $95 just to replace the oven light, when GE could have easily put the procedure in the owners manual, is a real consumer ripoff!

Model # JVM1752SP2SS - I have had my microwave for 5 years. Last night, my husband and I started smelling burning rubber. That lasted about 20-25 minutes. Then my husband heard a strange sound coming from the kitchen. When he went to investigate, he found our microwave on fire.

Hello to all reading this and considering purchasing a GE dishwasher or other appliance from them. Last June 27th we bought a new home which came with all GE appliances. In fact I have 2 of these dishwashers. Once in the basement (just for low usage) and another one in the kitchen. The first day the dishwasher in the kitchen did not work and they came out and replaced it. I have had 3 other service calls on this thing and now it does not clean. Six days before Thanksgiving. I called and the lady told me no service until November 30th is available. It does not work, the first time they came out it was for a leak, second time the pump was not working and the dishwasher was not draining and now it is not cleaning. It was almost as it was my fault. It is a dishwasher - you put the dishes in and then turn it on and they should come out clean. I should not have to rinse or do anything special to make it work. We spent over 1500 dollars on each of these dishwashers and now one if not working. I did not do anything other than turn it on and expect that it should clean.I was told that they would sell me another dishwasher at a discount. DO YOU REALLY THINK THAT I WOULD EVEN CONSIDER ANOTHER ONE?! A real company should replace this POS and give me another one for free and it has been 15 months and I have had 2 of them in my kitchen. I can tell you if you plan on purchasing look at KitchenAid they run forever without any problems. They also did a fantastic job of support (I had it for 6 years in one house with one repair, second house they never needed to come).

We purchased our Adora over-the-stove microwave oven from Home Depot. The Adora brand is made exclusively for Home Depot and were sold on its special functions and value. Well now, 3 years later, this exclusive models glass fogs up when we use it. There are only 2 of us living at home. We use it maybe 4 or 5 times a day. A microwaves typical lifetime is 9 to 10 years. Also, by the way, when we turn on the fan to highest, it sounds like an express train hurtling through our kitchen. Our dog had a heart attack and died the first day we operated it. No he didnt. We dont even have a dog. But you get the picture.

I purchased a GE Cafe Over-the-Range Microwave along with a GE Range. It was delivered on Nov 2009. The control panel started acting up and quit working altogether in May 2011. I called GE and found that the replacement part and repair was almost as much as I paid for the microwave. After talking to several people and making my case, I was told they would give me a discount on replacing my unit. I was to look at microwaves and let them know which one I wanted. I have left several messages and no one at GE will return a call.

Slow leak that caused E4 code to beep incessantly! Had a warranty repair person look at it... Turns out the new dishwasher has a faulty seam that in fact leaks! This is all fine until... one has to make numerous calls to the GE warranty line, which should be called a WARNING Line. The customer service rep was very rude and reprimanded us for not noticing the leak sooner, he seemed to not believe we had any issue... All because they could not find the service repair # that was submitted.Anyway, two weeks later we still wash our dishes and NO one has called us back from GE with any answers... SO FRUSTRATING! DO NOT BUY A GE PRODUCT whatever you do... This company has the worst customer service and warranty program. We make our daily call in hopes of being looked after one day... They keep telling us that a manager has to approve the replacement of this POC unit we spent $917 on!!! My business partner is about to purchase 20 GE dishwashers for his apartment block... I guarantee that his order will change after we chat this weekend! Thoroughly done with ALL GE products after this nightmare!

Model JVM1740DP1BB - GE Microwave - complaining since November 2014. Great microwave UNTIL the inside ceiling bubbled and began to flake off in various locations. A service tech that visited our home advised us to call GE and advise them of a potentially hazardous situation. The GE rep offered to sell us a new microwave but only stated that we were out of warranty, although this is clearly a manufacturers defect! She proceeded to tell us the lining was perfectly safe but maybe we shouldnt operate it. I have written GE management to see if they will assist in replacing the defective unit; GE is the reason we purchased it to begin with (but it may be the reason never to purchase one again).

I recently purchased a GE Profile 1.9 microwave oven from Home Depot less than a year ago. Last week I went to remove something that I had cooked and went to close the door and it would not stay shut. I ended up getting some masking tape to try and tape it shut in order to keep the light from staying on and burning out until morning when I could get a better look at it, thinking that it had to be something small that could be taken care of without any problem. Hinge adjustment, something getting in the way that I couldnt see, etc, etc. Wrong! I have been over this door with a fine tooth comb and there is nothing that I can see that is preventing it from staying closed, not only that but according to everything that I have read, I am very lucky that I didnt get fried while trying to figure out if the latching mechanism was functioning correctly. I am not even going to go through the long drawn out process of dealing with GE over this due to the simple fact that I have been there done that with my dishwasher that showed up with the front panel dented a few years back from the factory and I ended up blaming the place that I had purchased it through instead of GE and have since found out by reading other complaints that this seems to be something that is not unusual when it comes to GE appliances. I spent over 1100.00 dollars on the dishwasher and they only replaced the panel instead of giving me a new one, and I have never been satisfied with the way that it operates, and it was a very long and drawn out process and I am just not willing to spend the time again on another one of their products. It is unfortunate that we have entered a time where customer satisfaction means nothing, and the days of caring about having repeat business from a satisfied customer are over. The prices continue to rise on the things that we have become to depend on and cant seem to live without, but the quality and workmanship have not only diminished but also present safety threats. I will never purchase another GE anything and I am looking forward to the day when we all have finally had enough of this and do something that makes these companies stand behind the products that they sell and quits ripping the consumer off. Its rampant across the board no matter what you buy, and there should be laws in place in order to keep it from happening. We have laws for everything else, why not have a couple that protect the consumer and their pocket books.

Over-the-range microwave failure (model JVM2052, manufactured Dec. 2010) was purchased and installed professionally in March 2011. Total cost is $546. First, the fan failed in about June 2012 and I thought I can live with this. In Sept. 2012, the unit failed, but the interior light and clock still work. I paid $97.00 for a service call from the dealer, and the tech said the power source failed(?). Estimated parts and labor for repair is $370. So, I will buy a new unit (not GE) and pay about $150 for delivery and installation and take away this GE unit. I live in Morris County, NJ and this is not a rural area! GE service rep whom I called said GE doesnt service this area and to look in the yellow pages for an authorized dealer. I called again and got the name and address of the president of GE Appliances, and I am going to write about this product.

I have a built-in GE microwave. It is easy to use and best of all very easy to clean. It is brand new and stainless steel. Looks nice on the wall above the built-in GE oven. I can easily reach it. Some built-in microwaves are too high.

Started at the front rack hook. My wife stopped the microwave immediately, luckily she was right in front of it when it happened. This is a serious condition that could destroy a kitchen or even the house. I will call GE Consumer hotline tomorrow.

The little trap door which releases soap stopped opening when the GE top-of-the-line Profile dishwasher was one week past its warranty. Because of the design, all kinds of crud collects under the hinged door, meaning there is ALWAYS an odor unless we get down, hands and knees, to scrub it out. Features are fine -- as long as they work. Having a dishwasher that doesnt even dispense soap and cleanser isnt worth much, limiting us to the automatic feed with shine liquid. Stainless steel outside is impossible to keep clean. There are streaks and blotches within minutes of polishing with Sheela Shine. Suspect it has something to do with the humidity where we live, but it shouldnt happen. I find it strange that GE is perpetually sending me warranty extension offers for my refrigerator (which never fails), but nary an offer for the dishwasher or microwave/convection oven in the Profile line which have each needed repairs twice in the three years since purchase.

Our GE microwave stopped working after about 7 months of use. Ive never had a microwave break down on me before. Ive owned other brands which Ive used for years, actually lasted over 10 years. The only reason we purchased the GE microwave was because our old microwave was too big in size. I called GE for warranty service and it was very much of a hassle just to make the appointment. I had to call several times because a customer service representative misinformed me. It took a couple days just to set up a service appointment.Ive told the representative that the microwave stopped working and will not power back on again. The representative told me that the fuse probably went out. Something must have blown out. Finally, the appointment was made for about a week later, which was the earliest time available. It is so inconvenient not to have a working microwave even just for a day. Anyhow, the service tech came about two hours late. The scheduled time was for 8am-12 pm. He showed up close to 2pm. A family member was waiting at home all day because of this. Then the service tech told us that he needs to order a part for the microwave and that he will return a week later to repair the microwave.A week later, he didnt show up. No one even called. So I called back GE and found out that the appointment has been postponed! So now, we have been without a microwave for about three weeks. I think this is ridiculous. Im pretty sure that this is a common problem with GE microwaves and they already had an idea why the microwave wasnt working. It doesnt power-up! Now they are telling me that they dont have the part/s in stock? If I had known that we had to invest so much time and go through so much hassle from the get-go, I would have just purchased a new microwave three weeks ago. GE should pay me for all the time Ive wasted!

We bought our first home a couple of years ago, and it came with brand new appliances. Never in my mind did I think I would need to buy a new microwave after 2 years. Our GE microwave stopped working after 2 years. I had microwaves in past that lasted for 10 years or more. Never again will I buy a GE appliances again. The quality sucks. Don’t waste your money.

Purchased a GE 650 dishwasher which we quickly discovered has terrible racking for North American dishware. Also the control panel is overly complicated yet limited to use (always flashes settings even when not in use). Once you figure out how to load dishes into the very tight/ narrow tines they fall over and chip/break. When investigating the dishwashers by GE made in China/Taiwan etc all have same issue. The ones made in USA by GE have wider and longer tines. We have had MANY dishwashers over the 40 years and NEVER had one as bad as this.When calling GE customer service the senior rep was not willing to offer any customer satisfaction as nothing technically was wrong. At one point she stated we had made the purchase so live with it even though it was the wrong choice. We offered to pay for any cost difference, etc. When questioned about GEs interest in customer satisfaction she stated that was not a warranty issue. She was not concerned about a satisfied customer. With that, we will not be purchasing another GE product or its affiliates. What a waste of money.

All I wanted to do was eat dinner with my husband and I wound up on the internet for an hour trying to figure out how to make our microwave work. There is some kind of thing that locks you out of using it. Very frustrating when you just want to eat dinner!! Nothing works and you have to google how do you unlock this piece of crap that you paid good money for and trusted the GE label. All we ever use is defrost food or time cook vegetables. If you want a complex computer, go for this thing. Otherwise, I suggest you go for a simpler microwave that you can depend on to work.

Installed 07/06/2015 While I was asleep on 12/09/18 the oven appeared to start microwaving an empty oven on its own. When I came down 5 hours later the microwave had no power. I opened door and turntable had melted and glass had exploded. The ring under it was burnt and melted in one location. Top of cabinet on right side was hot. Then the internal circuit breaker restored itself and started some recovery process making odd noises sounded like the magnetron was trying to run since the top was getting hotter, after a minute the internal circuit breaker shut it down again. I then unplugged it. It appeared the magnetron started heating on its own and turntable did not rotate. All of the heat was concentrated at 12:00 edge of glass turntable. It also burnt the metal floor under that spot.

My Microwave oven is 22 years old. It still works fine, but does not have power levels on it. The reheat is vague and I have to keep checking so things dont burn or dry up. The dishes get very hot after about only three minutes. Other than that, it is easy to clean and still looks good.

My GE Washing machine did everything it was supposed to do, especially in cleaning clothes and very few if any machine problems and they last years and years, mine was 15 years old. It kept surprising me because it ran so smoothly, truly cleaned my clothes and ran forever. The Dryer couldn't keep up with my old washer, had to buy a newer more expensive machine that couldn't dry at 8 years old. I loved my reliable GE washer.

I owned this microwave for the last 5 years. Easy to installed, good appearance, stainless steel, easy to operate but fancy enough to prepare different meals to include the younger ones. Lighting very good and vent excellent.

GE dishwasher model # GDF610PGJ5BB was fine the first year and a half. It began making noise with electronic control panel beeping for no reason. The wash cycles were incredibly long. Finally after reaching the 26 month mark, the electronic panel gave out. Having no warranty, I called the repair division of the appliance store we had purchased it from. They were to charge me $90 just to come out and look at it. With the purchase price just under $500, I wasnt willing to take the chance of repair costing a third or half of the purchase price. Regretfully, we decided to give up on repair of this dishwasher. We decided to purchase a new dishwasher, but certainly not a GE.

I work as a service tech for a major insurance company. I am a master tech, and master electrician. The company that I work for owns an apartment complex which is used to house company executives whose offices are located at other sites, but often come to the Chattanooga Site to work short term. I was called to repair an old dishwasher in one of the apartments. Upon looking at the existing dishwasher, I decided to replace with a new one. I received a new GE model GDF 510 PGD 1WW dishwasher on November 8, 2013. As usual I unpackaged the appliance and examined the exterior. Finding no visible damage, and with the help of a master plumber, I removed the old dishwasher, and installed the new one. After all the connections were made, I opened the door, removed all the packaging from the dishwasher, and found the upper spray arm lying in disarray in the bottom of the machine. Assuming that this was the way that the machine was packaged, I installed the spray arm, plugged the machine up and started the machine as the operations manual instructed. The machine would not work. The power lamp would burn solid for a few seconds and start flashing. I tried to start the machine a number of times while reading the instructions, and while my partner read the instructions aloud, but with no results. Finally, I used a screwdriver to hold the door switch closed, pressed the start button and the unit started. The catch mounted on the door would not make the door switch, mounted on the machine body. We tried to adjust the switch and the catch, but with no success.The dishwasher did not show any signs of exterior shipping damage, but for some reason the upper spray arm was off and lying in the bottom of the unit, I found a small piece of broken plastic and a screw in the bottom of the machine, and the door switch would not make. Outside that I have no complaints. I am not sure where this machine was assembled, but it certainly was not equal to the machine that we removed. Thanks GE for making my job harder. I will have to find another dishwasher Monday and replace the damaged one, and perhaps send this one back, but the replacement will certainly be another brand.

I was sitting on my couch and I heard something running. I walked into the kitchen and saw my GE Profile microwave was running. At first I doubted myself and thought maybe I did something and then I cleared it out and went and sat back down. It did it again and again several more time. This is very scary. It was running like someone had set it and it was getting hot inside. Im not sure what else to do. The last time I had the same type of problem and just bought a replacement microwave and now this one is doing the same.

I may be speaking too soon because I need to run my dishwasher again to make sure the minor leak truly has been fixed, but I am very impressed with the responsiveness of GE customer support. There was virtually no wait to talk to a rep about my 2-month-old dishwasher with a drip (plus water was collecting inside). Less than twenty four hours after my call, a friendly man was at my door to fully diagnose and then correct the issue. This was the cheapest, bottom-of-the line model that they so quickly came to service! Now in an ideal world, a new dishwasher wouldnt need any servicing at all, but I think all dishwashers are pretty finicky so at the moment, Im pleased.

After many searches trying to do due diligence, we bought a GE dishwasher online Nov 2014. It was delivered and installed two weeks later. The day (Saturday) after delivery we loaded it and started the cycle; water went in, the circulation pump started and then the machine stalled. The machine was reset pumped out, restarted but no further improvement.Called the GE service number and after a 20 minute wait was informed that a request would be placed to a local service company. Monday the local service company (30 miles away) called to inform us they had to reject the service request and that GE would set up another. Three days later GE was called again. They were unaware that the service request was rejected so had not attempted to find someone else. They could not get another company to respond and told us to arrange the service call ourselves, pay the bill and submit it to them.My wife and I are now wanting to return the machine but were informed we would have to go through the local Home Depot. They informed us that we would need to have GE arrange it. GE was called back and informed us that the dishwasher could not be returned as long as it could be repaired which leaves it to their discretion. The process to arrange these things took a long time, many delays and many phone calls back and forth to Home Depot and GE. The calls to GE often took 15 minutes to get someone who would forward the call to the service rep which placed back in another 15 minute queue. Do not believe that Home Depot will take returns. The advertising makes you believe they will take but they do not without GEs RGA which GE is reluctant to provide. Avoid GE. I am not the first to find out that GE warranty (one year) and service is poor and that they are more than willing to wait out the warranty to leave their customers with a possible lemon. Other dishwashers are available with 5 year warranties.

I purchased the GE Cafe dishwasher in March 2010. Starting in January 2012, some of the keypad options stopped working. Then in April 2012, the keypad stopped working completely and I could no longer get it to turn on. I did call GE for repair. When the repair person was out to fix it, they said that this model has a design flaw. It was originally designed to sit 1 below the countertop so that the heat could release without shorting out the keypad. However, that would require a person to somehow raise their entire counter or fit the dishwasher below the floor somehow. GE was aware of the problem but decided to ignore the problem. That means that even though my keypad was replaced, the same problem will occur again and again no matter how many times the keypad is replaced. I paid over $1400 for this model, and the labor charges alone cost me $200 for the repair. I think it is absolutely despicable that such a large company has allowed a high-priced, defective product to go out into the market, knowing that a major malfunction will occur out of warranty in such a short period of time.

We purchased a GE Profile dishwasher because our old one was recalled for fire hazard and we were offered a rebate on a new one, and told there was no fix for the old one. On the new Profile dishwasher, the water inlet valve stuck open and flooded our home. Tech said we may as well have had a hose on full blast all night. Word to the wise, do not turn your dishwasher on and go to bed or leave the house! 7 1/2 hours later we woke to a completely flooded downstairs. When we were researching whether or not there were other complaints on that model dishwasher, we noticed there had been a recall for fire hazard ON THE NEW DISHWASHER! Since this is located right under our bed, we were fortunate though not happy about the flood! We have exceeded the 40K mark in damages and the assessments and estimates are still coming in. We will never own another GE product, though we recently purchased a stove with a double oven which is thus far wonderful. GE has also recently been purchased by Electrolux. We chose a Bosch for our new dishwasher.

Purchase date 4/20/15; Model # GDT 580 SMF ES; Serial # VD776355; Dishwasher wasnt installed until the end of June upon completion of a complete kitchen renovation. Eight months later, on March 1, 2016, the dishwasher was leaking water all over the kitchen! I initiated a service call and the repair man replaced the seal and it has worked without leaking until April 13, 2016. AGAIN a very large amount of water poured out of the left side of the door. The repair man had to return 3 more times and finally didnt have a leak for almost another year. Now, June 1, 2017 my kitchen is once again flooded. This machine is garbage - Very expensive garbage. Dont waste your money! I had previously purchased from Sears and never had a water leak in a machine that was 20 years old.

My GE microwave works perfectly for microwaving and baking. It is also a convection oven and it works as well for baking as the microwave component does for microwaving. It is roomy and accommodating. Ive had the microwave for 10 years and have never had a problem with it.

Nothing happened...never has. It just wont wash dishes. I have to prewash every item that is put into this piece of garbage. I bought it new and have used it for 3 years. It remained in the box the first 5 years I owned it and it honestly did me as much good in the box as it has since we installed it. It makes a good rinser but wont even wash off a lemon seed left in the bottom of a glass. This is such a joke. I would never buy another GE product. The refrigerator I bought at the same time, a side-by-side, the entire front door froze solid within 2 years and we had to buy a new one. Your company stinks. This is a rip off of my money. Refrigerators and dishwashers are not cheap. Model GSDL122F02BB is the dishwasher.

We selected this microwave because it has a toaster and baking feature as our small kitchen would be better without a toaster oven taking up space. Turns out user must change accessories from glass to metal when using the toaster and baking feature. The space needed to store accessories rendered the space saving concept as useless. Also, the toasting is slow and does not quite equal what a toaster oven accomplishes. Also the baking/convection mode is so noisy, one cannot hear radio/tv. 30 minutes for a baked potato is a long time for excessive noise. We bought from Kitchen Solutions in the Bronx about May 2014.

Great microwave when the thermostats are working. Have gone through 4 in 2 years. I have convection/microwave. This is a great oven, and microwave. The failing parts should be something GE corrects. Service contract was purchased after 2nd needed repair. Their contracted service was awful. No communication, mis-scheduling, unavailable parts, Poor customer service. Have officially requested with GE not to have this contractor assigned to correct any problems in the future.

I bought the Cafe dishwasher model #CDT855P2NS1, for $995, it arrived defective with the wrong size parts inside causing the door to not shut properly (as inspected by GE repairman). This was over 4 months ago. Since then I have been told to call every two weeks to see when a replacement model would be available in the warehouse (each of this calls required sitting on hold for over an hour). Despite having many of this model dishwasher for sale on the GE website, I have been told for over four months to call back in two weeks, because none are available at the warehouse and this is the only place you can source them from.Now I am being offered the price I paid for the dishwasher despite the exact replacement now costing $1,277, from the same place as the previous one was ordered from. This doesn’t include the $149 to install the new dishwasher to replace the defective one that was initially installed, which I am being told will not be reimbursed. I just want to warn everyone about not purchasing this product or expecting any support from GE.

This dishwasher was brand new in our new house. It didnt work right from day one. GE service came out 3 times to repair. The first 2 times the GE tech was here all of 5-10 minutes and didnt repair it either. The 3rd time the tech actually pulled out the dishwasher and found the problem and fixed it. Their customer service was terrible.

GE Model WES1130DM2BB MFG APRIL 2011, bought Oct 2011 @ SAMs Club. Microwave continues to run after cook time and will not stop until unplugged! Service Dept offers a $25 discount on a new GE Microwave after cutting cord & sending info plate in. I am concerned this microwave will cause a fire! Luckily I was near and unplugged it!

Has anyone experienced a plastic burning smell when the dishes are drying? My dishwasher is 3 years old and I wash on Light cycle which is suppose to be 45 minutes long but goes for 85 minutes. Company said to turn off circuit breaker and turn back on and it should be fine, it isnt. Last two times I used the dishwasher it wouldnt completely shut down so I had to do it manually and before I did this I could smell a plastic burning smell but there was nothing on the elements. I called for a service call but they were shut down for 4 days.

4th service call for a piece of ** over the range microwave that keeps breaking. The service is a joke too. The sent some moron to come take a look at the microwave after I placed this latest service call. He came and without diagnosing, he ordered a few parts and scheduled a follow-up for today. He called this morning to reconfirm the appointment (which was already confirmed 2 times previously and this reconfirmation has never taken place previously) and I missed his call. When I called him back short whIle later, his voicemail directed me to call the 800 #. After a 35 min hold with them, they said since I didnt pick up the phone in the morning, the appointment was canceled. What???? It states nowhere that theyll call you to reconfirm an ALREADY SCHEDULED AND CONFIRMED appointment and that if you miss the call, they cancel the appointment. Next service call is a week from now, which makes it 3 weeks without a microwave. I hope they rot in hell.

I have a GE microwave and was using the exhaust fan on it when it stopped working. I am getting the same message as other folks - KEYPAD SHORTED. I have barely used this product since it is in a vacation home. It looks brand new, but I am really disappointed in it. My cousin told me shes had problems with GE appliances and will never buy another.

GE Cafe Dishwasher Model CDW9380N00SS - The dishwasher is just under 5 years old and is used approximately once daily for lightly soiled dishes, usually only half full since there’s only 2 of us in the house. On 12/28/2012, I ran the dishwasher on a normal cycle, no additional heat or heated drying and the cycle finished about 9pm. I did not open or unload the unit and went to bed. About midnight my wife smelled smoke and woke me up. We ran downstairs to find the dishwasher blazing hot and the smell of burning plastic coming from the dishwasher. I killed the circuit breaker and opened the dishwasher door. The whole first floor of the house smelled liked burned plastic and we had to open all the windows and doors in 28 degree winter weather to vent the smell. The bottom heating element had come on and stayed on! The entire bottom of the flatware basket was melted out and all the forks, knives and spoons were in the melted plastic goo in the bottom of the dishwasher. The wheels melted off the bottom wash rack and the lower wash arm melted and burned. Also, the plastic screen in the bottom of the dishwasher is twisted and distorted. Some dishwasher safe items like the glass coffee maker carafe with the plastic handle and rim are unusable since the high heat distorted the plastic parts. They were on the top rack. We feel fortunate that first, my wife smelled it and woke up. Second, the dishwasher tub is stainless steel and so it contained the heat and lastly, that our counter tops are granite since directly above the dishwasher, the counter was hot enough that you could not hold your hand on it comfortably. GE is coming today to evaluate the dishwasher and determine what, if anything, they will do. It is not under warranty, but as I told GE, it’s a safety concern. We dont want it fixed, we want a new one. Nobody expects a 4-5 year old top of the line dishwasher from a company like GE to be a fire hazard in their home. This dishwasher cost over $1,100.00 in 2008. My questions: why would the heat element come on at all given the settings? Second, why did it come on after the cycle ended and the indicator lights said clean? Third, why isnt there a high heat shut off switch that would have killed the power in a circumstance like this? And fourth, since I see other consumers with Cafe Dishwashers have had similar concerns, why isnt there a recall on this model? There are recalls on many other models it seems for heating element malfunctions. I believe that any action other than replacement, even after the warranty period, is irresponsible on the part of GE, but the cost of law suits and settlements maybe less than the cost of replacements or recalls. What of the potential cost of lost lives?

Microwave Model JVM1750DP2bb defective construction- Plastic is protruding inside the Oven. Took possession of a new home in January 2014, but only occupied part time. I estimate we had the equivalent of 6 months being occupied. In January 2017 the magnetron broke down, at which time I noticed a piece of plastics protruding inside the microwave through a vent hole on the Magnetron side. I did not take the extended warranty and GE only offered to send a repair man. Since this is an over the stove model venting outside, it had to be repaired or replaced. Checked with the supplier and they estimated a minimum of $ 300 repair cost. Home Depot had model JVM6175DKBB on sale for 249.00, and with delivery, and installation, were talking $ 350.00 to $400.00 to replace. I got in touch with GE Consumer Affairs, and they did eventually agree to provide the JVM6175DKBB for $ 270.00 including installation. They will take possession of the old model, so there wont be any way for me to confirm or deny a manufacturing defect.

I do not remember what I paid for this microwave, but my budget was low, and the value I got is good for the money. Ive never had any trouble with this oven, and its 5 years old. Its a good size and cooks evenly.

Used the dishwasher for 1.5 years (it worked fine), but then the heated dry stopped working (only 1 year warranty). $500 for diagnosis and repair versus $700 for a new dishwasher. Guess I’ll be getting a different brand going forward.

GE is a very reliable name brand with history to back it up. I’ve used their washing machines for years and only changed out once due to newer features. I had Thebes first washer for at least 10 years, maybe a little more. It only needed one part replaced, that was the capacitor, otherwise it was still usable. I am not an in depth handy person but I will read and do my research and found directions doable. Additionally, I found the service help desk very informative and that’s how I discovered it was the capacitor that had gone bad after washing clothes for so many years, and believe me, I did a lot of cycles with my kids and family. I feel I got more than my money's worth. Lastly, I’m still using their products to this day. I may not have the frequency because we are empty nesters but I still believe in their products,

I thought there were food particles between the glass plate and the ring. When I took out the plate, I saw that the paint had bubbled and was peeling off the bottom of the microwave. Extremely unhappy with this. Ive had hand-me-down off brand microwaves that lasted much long than this GE and with NO PROBLEMS until they just rolled over and died. I have all GE appliances in my kitchen and have to say that Ill never buy GE again. Electric stove is a problem, dishwasher a problem. Refrigerator was a problem (when it was new! it was fixed and thankfully is still running well).

It is very quiet and does an excellent job cleaning. I really like the new slate finish on the front panel. It has a stainless effect but does not show marks as well as SS and is very easy to clean. Great design, the top rack is adjustable and the use of internal space was well thought out. Very simple / uncluttered and I like the control mounted on the top door feature. Dont recall the model number. The washer was in the $650 price range which is sort of in the middle but has a SS tub. In my opinion the performance and features are no less than more expensive brands / models.

Touch pad on GE CAFE over the range microwave started failing within first 2-3 years. Now, 6 years later, it has completed failed. Repair part alone (not including service call) is almost $550.00. Pure junk...made in MALAYSIA!

GE over the range microwave Model hvm1750DM1 WW - It’s just about 2 years old. It started making a grinding noise, then quit. No more GE for me.

I purchased a GE Smart water heater and installed in October 2004. I have not had any issue or problem. 50 gallon natural gas unit for 5 people. 40,000 BTU I am looking to replace before there is a problem and will certainly look at GE again, but these more recent reviews are a concern. The trouble is, these websites attract those who are dissatisfied and may give a biased view of a product.

I bought GE Profile appliances 5 years ago. The dishwasher motor needs a new one. It cost me $300.00 to fix and I ended up buying a new dishwasher, of course, no more GE. Six months ago, my GE profile fridge is not making ice. It cost me $300.00 to fix. Now, the freezer is not working right. I was told another $300+ to fix. I went out and bought a new fridge. Back to basic, Kenmore brand. GE profile is not inexpensive and only last 5 years, starting to break down. Please stay away from this company.

It is a ten year old microwave and it works fine, looks dated and Ive never liked the start buttons location. We bought at the time of our kitchen remodel, good size and power for the money. Im sure newer models are just as good if not better.

We purchased all GE Profile appliances when we built our house 4 years ago. The dishwasher, for the second time, has turned itself on and melted everything inside and got smoke in the house before we discovered it. I am afraid to have it repaired for fear that it will happen again when we’re not home or asleep. There seems to be a lot of people having this problem, yet I do not qualify for any recall that I can find. I am disjointed in GE to say the least.

Ever since I bought this dishwasher in Jan 2014 it hasnt dried properly. Finally had a tech come out and he told me the water wasnt hot enough. How is it energy efficient if I have to raise the heat in my water heater to get the dishes to dry???? Very dissatisfied! My old dishwasher (with plastic lining) dried the dishes with no problem. I had it for 16 years before I had any problems with it. This new one is a problem from the first time I used it. No GE ever again!

I purchased a full suite of GE Monogram Appliances about 5 years ago. All are fine except the microwave which was made in China. The back is rusting out, the inside is chipping at the door and moisture builds up in the door window. This progressive deterioration has taken place over the past 5 years. I paid $420 for the microwave plus $226 for the trim kit. Now, all GE wants to do is sell me a new unit and a new trim kit (will not fit old trim kit). I paid approximately $20,000 for the entire group. I bought GE because I trusted the name. Im stuck with GE if I want to match the remaining appliances. There are only two people living in this house so there is only minimal usage. To further complicate things, there is no serial number on the tag.

This is a review from another customer “Not only does this dishwasher do a lousy job of cleaning dishes, I have just found out it allows dirt to collect under the door flange==lots of dirt! There isnt enough hot water to clean this out. Very gross--do not buy.” I agree with this 100%. I have to use Clorox wipes to wipe out this disgusting sludge that builds up under the door flange every couple days. I have to buy a new dishwasher because my dishes smell, are still dirty and very unsanitary. Do not buy!!!! My dishwasher is only 3 years old.

My 5 years old over the range GE Microwave Oven in my old house had a keypad malfunction. I replaced that oven with a different brand. This time, my 2 years old GE profile microwave in my new house has the same keypad shorted like other users posted. I was hesitating to buy this brand at the time. But the look and match with other appliances, plus the good deal from vendor, I gave it another try. I made a terrible mistake. No more GE appliances for me.

Our over the range microwave oven is under warranty and broke twice. They refuse to replace it. It was fixed the first time but its broke again and the only service tech refuses to come to our home to service it anymore. Its been a nightmare and still not resolved. We will never purchase another GE Appliance ever again!

However, the GE Monogram Microwave ($499 at Best Buy) broke down 17 months later, a few days before Thanksgiving 2015. GE claimed it was out-of-warranty, and I would have to pay $99 to have a technician look at it, and would charge for repairs. We are stuck with the GE Monogram Microwave as it is a built-in unit and our cabinet is built around it. So we went and got a new one from Best Buy. When the new one came and when we removed it from the box, it had a large dent in it - a very large one. It clearly indicates a shoddy QC job, as the unit should not have left the factory with such an obvious dent. We asked BEST BUY to replace it, but a new one is not going to come till after Christmas. So it was 2 strikes against GE Microwave ovens for me.We spoke to GE and they were not very sympathetic, and amazingly did not even apologize for the inconvenience caused!! They just stuck to their out-of-warranty mantra, which I understand. But then the occurrence of a second event with another GE Microwave, and the inconvenience of sending back a big dented one was also not acknowledged or perhaps even understood by their CS representative. So it is strike 3 against GE Appliances for me.I would never recommend GE microwaves and was totally disappointed with the Customer service of the GE Appliance division. I also have GE Cooktop and two GE wall ovens and shudder to think what will happen if they should break down. Just sharing a sad experience that holds some lessons for me and my family and friends. (Rethink buying GE Appliances.)

I cant remember the exact date of purchase for my GE Spacemaker microwave oven. I have a receipt somewhere, but I have receipts for repair dated 2002. It is for a door seal gasket for the microwave. A model JVM60 GE Spacemaker installed over the range.The microwave worked perfectly for several years. Then one day, when I pressed the start button, I noticed a small fire inside the window above the control panel where the time is displayed. I called repair man; I was told that it was the circuit board, and GE was not able to send repair spare part. Since then the microwave is only good for displaying the time, and storing my everyday pan. I do remember paying $400.00 for this microwave because I purchased it at my employment. It would seem to me a company making a $400.00 appliance would be backed by a circuit board, which they know would go bad in a short time. Thats why they only had a one year warranty guarantee.To show you the difference in a microwave appliance, I purchased a small counter top microwave in 1997; it still works like a charm, and I use it every day. From the negative reviews I read on these Spacemaker microwaves, I firmly believe there should be some compensation to us consumers for the money spent, plus the hazards we experienced. If that is not agreed, then all of us consumers should file a class action suit against GE.

We purchased this new 8 years ago however the problems started after about two and a half years of use. I called GE when the paint started peeling off of the door of the microwave. They asked me if I cooked salty foods. I cook bacon in the microwave. They told me my only option was to buy a new door and have it installed. It was $250 at the time. I did not have the money or desire to fool with it. I continued to use the microwave and it has continued to degrade. Now eight years later there is so much metal showing that we decided we must do something. It is unsightly and very difficult to clean because its rusting. Ive been expecting electrical arcs to occur and the microwave to catch on fire. It hasnt done that. It has continued to cook the food. The entire metal area on the door is without paint. There are other large areas of metal and rust inside on the bottom of the microwave. The entire vent panel is without paint and rusted. We also had to have the control panel replaced twice. It was covered once under the warranty and once it was not. We also had to replace the element in the oven which is used rarely. To replace the microwave and oven combination now would be $3,500. When I do replace it I will replace it with a different brand.

GE above stove microwave (DVM1850DM1BB) stopped working and went completely dead after 1 year. Purchased a second GE microwave because it easily fit into the existing space. Sure enough, the second microwave stopped working and went complete dead a little over a year. I have always heard bad things about GE products, now I can confirm those negative comments about GE products are true.

I am so disgusted. My 1 year and 2 months old microwave could have burned down my house. It got very hot so much you couldnt even touch it! Microwave product code JES1344SK. This should be a recall and customers should not need to have to pay for these to have them fixed. GE should be grateful this didnt start the house on fire and no one was killed by it! I will never by GE again!

Microwave and convection oven together...perfect for heating food or baking. Very easy to operate. G.E.profile. Mounts over the stove with an exhaust fan and lights. Also has a rotating plate in it to heat evenly.

My GE refrigerator is almost 30 years old. It's not a frost-free refrigerator, but frost build-up has not been a big problem. I usually defrost it twice a year. I have had no problems with it over the years, other than the light bulb burning out. I would certainly buy a GE refrigerator again.

Five years ago I purchased a brand-new condo w/ a GE Nautilus dishwasher installed. This machine has NEVER worked right. Issues: 1. The detergent cup that closes, consistently gets stuck shut, hence only half of the detergent gets dispensed and a second cycle is usually needed to get the dishes cleaner. 2. Dishes are never really clean. Theres always at least one dish that has something left over on it, but its usually multiple dishes. 3. Lower rack started rusting out after 3 years of very light use (used approx 3-4 times a month). Loud. Louder than my washing machine. 4. Replacement parts are ridiculously expensive. A new lower rack is approx $100. My condo also came with a GE refrigerator. It too is junk. Never again...

I live in a condominium building with approximately 105 units. We all had the same GE microwave installed in our units approximately five years ago (contractor-installed). I sent out a mass email to all of the owners to ask if they were having the same problems I was having my microwave, which was the touch panel will not accept commands. I received approximately 15 complaints from various homeowners with the same complaint.When I called GE to tell them the problem I was having with my microwave, they told me a technician would have to come out and diagnose the problem. The service call would be $99.95, and at that time the technician would let me know what the problem was and tell me the charge for the replacement part and labor cost. I told GE Customer Service that there were many people in my condo building who were having the same problem and I wanted to know why each homeowner should have to pay the initial $99.95 service call fee? The response was, That is our policy. To placate me, GE customer service said they would charge me the initial fee but I would receive a 25% discount for parts and labor.In the meantime, two or three other homeowners made service call appointments for their microwave oven with GE. One homeowner was given a fee for parts and labor, which would have been only slightly less than buying a new microwave and another homeowner was not given a labor cost. In both cases, the homeowners did not go forth with their repairs, because buying a new microwave was more cost effective.I want Consumer Affairs to know GE grossly mishandled this malfunction issue amongst a group of homeowners who own the same microwave. Secondly, I realize the microwave ovens are five years old, but GE should have some record regarding failing parts along with the life cycle of this product. Lastly, I want GE to be held accountable for not telling consumers a repair cost for certain issues. There should be a cost per hour, not cost per broken item.I kept records of all correspondence amongst the homeowners of my condominium building, so I will be of great assistance if you need further help from me. Product malfunction is a GE Profile Spacemaker 2.0 Model # JVM2070SK02.

GE continually shows us why they are failing as a company. In just this last year I have replaced a less than 5 year old GE microwave, three separates parts to my GE monogram refrigerator, and now this one and a half year old dishwasher. The only appliance that GE makes that hasnt broken is the stove/oven that is over 10 years old and shows no signs of weakening.I purchased the upgraded stainless steel model that contained all the bells and whistles. It lasted 1 year and 3 months before the entire control panel stopped working. We utilized the dishwasher about once a week or once every two weeks in a two person household. Hardly a rough environment for a 700$ appliance. The repair costs was quoted for 99$ just to have GE look at it. The control panel was 140$, plus additional labor. This amounts to over 280$ to repair a year old product. I advise buying LG or Bosch.

For the amt. of money I paid for this microwave, you would think it would outlast the house. I bought it 3 yrs ago. The touchpad covering started to get warped right off the bat, and the handle was always steaming hot when you used the stove top (also GE). The other day, while using the stove top, I happened to look at the microwave, and it had no power. I checked the breaker, it was fine. I happened to notice a crack on the touch pad. After further investigation, I noticed the entire touchpad is shattered. It was clearly from the heat given off from the stove top. And I wasnt even using the microwave at the time. I sent GE an email, didnt even get an auto response. I am going to call them, but we all know what they are going to say, and I am not paying $482 for the part. Was hoping there was a recall, since so many people on the net complain about the touchpad.

I purchased my new home equipped with all new G.E. Profile stainless appliances. Three years after that, our microwave (model number JE2160SFS01) had the magnetron go bad - no problem. I called G.E. and had a tech come out and replace it ($79.95). Great! 4 years later, it goes out again. But it’s still covered under warranty (cool). I call them, set up appointment, and ask what the charges will be - $79.95 home service fee. Fantastic! I schedule the appointment, and three days later, a technician comes to my home. I tell him it’s the magnetron, and he turns on the microwave for a second. He says yup and types his diagnosis into his laptop and prints out his estimate. He hands it to me, and it says “Total amount $ 270.10”! On a covered part!I asked him if he was joking, because the M.S.R.P. for that model, which I got from G.E., is... wait for it... $269.00 for the whole microwave oven! I threw the tech out and called their consumer advocate line (which took over an hour to talk to a human) and asked who sets their pricing for repairs, and was told their senior technicians set the labor charges! It’s a twenty-minute job! $190.00 for twenty minutes? So the tech left with $79.95 for doing absolutely nothing! Great job General Electric! I will never buy another product from you again! By the way, the magnetron they say is priced at $142.30 is available online for $97.50! It takes twenty minutes to replace, and a monkey can do it!

I bought a GE Adora dishwasher from Home Depot. There is nothing technically wrong with it - in other words - it is not malfunctioning. It is just that its normal operation is AWFUL, in my opinion. The PROS: it is very quiet. The CONS: it does not clean your dishes! And since this is the primary function of a dishwasher - I would say it is a complete failure. Originally, I had hard water, and I thought that was probably the issue. I purchased a whole home Kinetico system, which remove almost all particulates from the water, and makes bottled-water-quality drinking water. (On a side-note, I would TOTALLY recommend the Kinetico system!) But even after having the water issues fixed, the dishwasher has NEVER worked properly. I have used every type of dishwasher detergent, including Cascade Complete & Platinum, Finish Ultra & Quantum Powerball... and I have also added rinse agents etc. Basically - whatever state your dishes are in when you put them IN the dishwasher, they will only be slightly improved when you remove them. Even if you SOAK the dishes first, they come out with all kinds of residue. It does an especially horrible job on glassware, but silverware is also terrible. And I have to re-wash by hand every coffee cup that comes out. I truly loathe this machine, and will replace as soon as I do enough research about a better brand & model.

We purchased a Profile Dishwasher, Stove, Oven and Microwave. So far weve had problems with all products especially the dishwasher. The bottom of the dishwasher is filled with water, the door has water running down the front and all dishes have to be dried. I have talked to GE and I was told the new models do not have a drying system as in the past due to EPA. I feel like we have spent thousands of dollars for items that are trash. Had I known I would be drying dishes I would never bought GE products. I would trade this GE for a SEARS in a minute but too late. Ill keep calling GE office, maybe a miracle will occur. Ive tried all the tricks in the handbook... doesnt work.

We moved into a new home in June of 2011 with the appliances already included. Ours came equipped with a GE, over-the-range microwave, model JVM1540DP1WW, manufactured in Malaysia, in April of 2010. Within several months, the revolving platter began to make a bumping noise while turning and then it eventually quit turning altogether. Five service calls later, we had the platter motor replaced, circuit board and four fan motors (apparently the platter has voltage supplied from that fan to make it run) and it still didnt work.It was taken back to the shop and eventually the problem was traced to a loose wire on a terminal connector. After a month of operation, it is again beginning to make the bumping noise while the platter turns. To top it off, Consumer Reports (the March issue) deals with problematic microwaves, especially the GE model and the unexpected fires that can occur. In addition, they can be susceptible to (not always however and only on certain models) wireless transmissions which could potentially cause them to start on their own. I know for a fact that it knocks off my XM Satellite Radio when it is running. Bottom line...its history and will be replaced with a check rated appliance before I too have a major problem.

I purchased a new GE washing machine, and a new GE dishwasher, less than 5 years ago. The washing machine started leaking suddenly, and the repairman stated it was due to a cracked basket. They stated this was very rare, but the warranty had expired. The repairs would cost as much as a new machine. The dishwasher stopped draining water. A repairman advised there were two pumps, and one or both may be out. Estimates to repair the unit were only slightly less than the cost of a new unit.I will never again purchase GE appliances. I believe the life of a home appliance should be longer than 5 years. The cheap units I bought in my younger years lasted 20 years, without any problems. The GE units are not quality machines, and repair costs are outrageous. Nice way to try and convince appliance owners to just go buy new units. I can guarantee, I will not buy GE products ever again.

Wow, Donna from NJ, I could have written your dishwasher report! But since I didnt, I have never been so disappointed in an appliance purchase as my new GE dishwasher! Not only are some of the dishes & silverware coming out more dirty than they went in, it takes a ridiculously long time for a cycle. And if there are more than a couple of tablespoons of water on the door, it will pee out onto the floor when the door is closed! Not to mention that there is junk stuck to the floor just inside dishwasher, under the door, after the cycle has run! Yet the worst part is how dirty dishes are after even a Sani Wash cycle! Sometimes, the detergent lid is still closed. Sometimes its open, but the detergent is still there. Even then, dishes may be cleaner in appearance that time, than when the detergent is gone. A water glass, may have gritty stuff - not just detergent stuck and hiding down inside, or more obvious all over inside the glass. I have spent the past year experimenting with various things: detergents, amounts of detergents, arrangements of dishes, heat of water, pressure of water, rinsing dishes before cycle, etc. Glass and pottery normally fare better than plastics, but again the plastic may have started cleaner than they come out! The dealer has been out three times, finding nothing obvious the DW itself, nor anything I have done wrong. He has been told there is a kit that would fix the performance problem, but he cant purchase it, nor can his distributor. I have been told the length of cycle is because our government regulates the amount of water used. So my question is, then its okay to use more electricity?! Its totally embarrassing to serve someone a drink in a glass that is found not clean near the end of the drink! And I, too, have an old 12-years-dishwasher that still works! It was even a cheaper brand. I never had to think where pieces were arranged in that dishwasher. I just thought, in my newly built house, I should have new appliances!

I have a General Electric HVM1540DN1WW over the stove microwave that I have had. This month will be a year and a half. The oven stopped heating so being a DIY person, I pulled the oven out and took it to my workshop to see if it was something I could repair. Inside the front panel was a very helpful schematic of the whole oven. Using the troubleshooting step listed on the paper, I found that the Magnetron tube had gone out. So I went to my owners manual and found that the tube had a four-year warranty on it so I called General Electric consumer relations to have the part replaced. First I had to fight with them because they said it was only covered for a year. After about an hour and a half on the phone and giving her the publication number on the manual, she agreed that it was indeed covered for four years. So she said that she would replace the part and she would even send a technician out to install it at no charge. I was very happy at this point. She said that she would ship the part to me next day with UPS and the tech would be out the following day to replace it. So far so good, till the next day when the part did not arrive. I called back in to General Electric consumer relations and spoke with a man this time and he told me that she had canceled the order that is why I did not receive it, and he couldnt see why. So he looked at the comments she had made the day before and did see that she said she would replace it and send a tech. The tech was supposed to be here the next day and I had no part for him to install. The man said he would place the order and have it shipped to me by the next day no later than 10 a.m. and the tech would be here between 1 to 5 p.m. Great! Until the next day and again no part when they said it would be there. Again with the call only to find out that it was scheduled to arrive next day guaranteed by 7 p.m. The tech is supposed to be there with in the next few hours and I wouldnt have the part. I called Fed-Ex and sweet-talked the lady into getting a hold of her driver to see if she could get to me ASAP. Bingo, next thing you know I have the part, the tech calls and the part is replaced. Oh boy, the big gaping hole above my stove is finally going to be filled once again. (I promise I am coming to the end.) After reinstalling the oven, I found out that it was taking longer to heat than when I got it, and it has a brand new Magnetron in it.Again with the call to General Electric consumer relations to set up another tech to come out and check it out. So the following day, the same tech arrives and puts a cup of just barely cool water in it and puts it in for 30 seconds, pulls the water out and says it is working just like it is supposed to and leaves. Well, again I called General Electric consumer relations to let them know what has transpired, but this time I asked to speak with someone higher up the food chain. I then spoke to a lady and she said that she would set up another tech to come out and check it out, and if it resulted in the same way that she would replace the unit with a new one. The following day, the same tech calls me and said that the oven is working the best that it could so I should call back to consumer relations as he did and set it up for a new one to be sent in its place. So I called once again and was not able to speak with the same lady and the only thing she could do is send me a voucher for $250 laying around for a new oven, but I would have to purchase one and send the voucher in with the receipt to get a refund. I told her that I did not have a spare $250 dollars around to go buy a new oven and then wait for the refund to get to me. So I asked that she have the lady that said she would replace it to call me back to straighten this problem out. Finally the following week, the lady calls me back and said, This is the best that I can do, due to me voiding the warranty. I asked, What? She said that the tech that spoke with me said that because I had hard wired in the unit to the house wiring, it was receiving low voltage so she couldnt do any better than that. I told her that was the most asinine comment I have ever heard coming from a field tech and asked her whether he went to a school backyard Techs-r-Us. I asked if she would have the tech call me to explain. I also gave her some friendly advice that she should not use that comment to anyone else for fear of someone laughing at her. We agreed to have the voucher sent if that was the best she could do. I will not buy another GE appliance again! I have purposely not mentioned anyones name because it was the experience, not the person that I spoke with.

Installed by builder of home. Mid level SS model, very quiet. Does not dry dishes completely. LED lights on control panel remain on indicating cycle even when finished.

My dishwasher is doing the same thing as the recalled models. The GE Cafe model is not included in the recall. The dishwasher front, which is stainless steel, becomes so hot it burns to the touch and stays that way for hours. Burning smell in the kitchen! Cafe models need to be added to the recall!

Purchased my GE Profile series dishwasher several years ago and it has served me well over countless cycles. There have been a couple of occasions that it required repairs (water leaking) but had been done so under warranty conducted by an actual GE tech. When this unit finally reaches its usable service life I’m most likely to consider a GE unit again.

The microwave is large enough for a whole chicken and operates at both a high speed and good efficiency. Most items can be timed within minutes of properly prepared meals.

Purchased the cafe dishwasher in March. We are now on our second one as the first did not work and now this one does not work. It worked fine for the first couple of months and now it’s doing the same thing as the first one. Pump is on the fritz apparently. Truly disappointed. We owned the cafe dishwasher at our last house and loved it so we made sure that we purchased the same one when we bought our new house.

The GE dishwasher (model number GLD9312P02SS) I bought about 3 years ago is not cleaning properly because the screening that keeps the bits of food out is disintegrated, and apparently, the part to fix it would cost over $300.00. I will never buy another GE product again.

I bought a GE dishwasher that has a plastic tub. The tub smells. I asked GE to replace it, they wont because they say it operates correctly. I cannot imagine why any manufacturer would use a product in a dishwasher that STINKS. The plastic even has a warning for California consumers, that its a cancer-causing substance. Im glad I dont live in California, so it will never cause cancer here....

The paint started peeling on the inside ceiling area of the microwave the end of the first year we bought it. I called GE and they claimed this was not harmful to the operation of the microwave. It was disgusting to have paint chips falling onto food we were cooking. Now almost all the paint is gone and there is some rust too. How can this be for cooking and what if some of the paint is accidentally ingested? If GE did not replace or offer to repair the problem. Stay away from GE microwaves is my advice.

I wasted my whole day waiting for GE Technician to come. Nobody called me to let me know that they are not coming. I have to call them only for a Mr. ** to tell me that they had rescheduled the appointment for another one week without notifying me. Good job that GE APPLIANCES are doing. You remember the so called TOO BIG TO FAIL? It means, they can do whatever they want at whatever time or day they want. I dont have a vent in my house and that means I cant use the stove. Is this ridiculous or I am missing something here? Is it TOO BIG TO FAIL? Yes, I forgot that. I will be staying in a house with a new GE APPLIANCE that has not been working for the last one week and have to wait for another week. Mind you, this Appliance has been used only for barely a month. Is there anybody out there who is facing the same problem or its just me. If there is nobody going through the same experience, an excuse like there are no Technicians available to come to your place and do the job. If there is anybody out there who has trust in GE appliances like I did or even thinking of getting one. Be aware that you will be through what I am going through and there will be no technician available for another two weeks. Be ready to wait for they will reschedule your appointment without letting you know, why? Because theyre TOO BIG TO FAIL. What will you do? Wait until they decide to come, if theres a technician available. I just realized that GE means GO ELSEWHERE. Thanks GE for the good job.

I called the toll free number because of the concern I am having with your microwave, the paint is coming off the inside. So my concern is first why would it be coming off, is it a defect in the product or does it just happen? The person was helpful and seemed as if it was to be concerning. WELL IT IS to me. Could it make us sick, do I need to put it in the trash or what? Thanks for not helping me and not being concerned, but I am sure if it was you or family you would have had a different story to tell.

I bought GE OTR microwave in December. It is exactly one month old now. My model no. is: 9195SVC. It looks good, but I find the fan very noisy, even when it is at low. My range hood which we had in the kitchen prior to this microwave was very quiet at low and only a bit noisy at high. I do not know if the noise is because I have steel exhaust pipes vented out. Rest is O.K. but given that others have reported problems in 1-2 months, I am still nervous.I bought this product at Sears with an extended warranty, which is some relief. However, when I was shopping for this at Home Depot, the salesperson told me these microwaves last only 4-5 years. One good thing about Sears extended warranty is that if it is not used over the five years, they refund the warranty payment (with taxes) in the form of a gift card and they were also cheaper than Home Depot.

I brought our brand new home just over 1 year and 8 months ago with all new GE appliances. One of the GE Smart Built-In Double Wall Ovens, the bottom one which we never use, but the inner glass shattered randomly, very dangerous and they want us to pay them $100 for the inspector visit and then more for the par and service $325 for the replacement, the GE is disagreeing they had a defect on installations. That is an experience that we never repurchase GE brands, my friend had the same issue. They replaced in their house this way without warranty, however they disagreeing our oven had the defect on installation, lesson learned, never never buy the GE again!

We were super excited to get this GE Profile Cafe dishwasher. Minus the brand, it was the exact design/style as the one my dad has which we love! First issue, dont have a name of a dish liquid if you cant use all of them. Cascade apparently makes different detergent styles for the smart dispense. Dishes were ridiculously dirty and the horrible thing is I couldnt find an answer why on GEs site, I had to go to a handyman site. That was about a month and a half ago. Today, I did the dishes and, of course, let it do its thing. I always have the heated dry on by the way. Well, dinner came and I grabbed some dishes out which were screaming hot and I had to use an oven mitt. I didnt think anything of it because sometimes Im a sissy about that. Well, its now 3 hrs later and I get up to the smell of burning plastic. My first thought was that the sippy cup straw fell on the heating unit. I did not, however, expect to open it and see the Tupperware melting, the silverware rack melting and the water bar to be melting to the heating unit and it being so hot that I have to use an oven mitt just to touch the freaking rack. Oh! And by the way, we bought this off Craigslist last year and it was brand new. It still had the casing around it from the store.

GE profile microwave magnetron burned out after 2 years. Part is supposed to be under warranty, but repair is not. There are no service centers in my area. GE wont just send me the part, or let me send them my old part.