We purchased a French door KitchenAid refrigerator six years ago. Two days after the warranty expired there was a leak. We contacted a repair company and he said KitchenAid’s aware of this problem and they aren’t doing anything to fix it. He did fix the leak. The next year the icemaker went. We had that replaced. Now there is a different leak from the water reservoir. The water reservoir and assembly is obsolete and there is no replacement. After doing some research I found a replacement part number, but that replacement part is also obsolete. We will end up turning off the water supply for the water dispenser and just start buying bottled water again. This is the second time we had a KitchenAid refrigerator. We had no problems with the first one which was at a different property. Was still going after 12 years when we sold the property. When we remodeled the kitchen in our current home we went with KitchenAid. Now we are so disappointed. We can’t justify buying a new refrigerator only because of the water reservoir leak.

Kitchenaid 29 cubic ft. refrigerator is a complete lemon. Repair company has rebuilt whole fridge twice, from computer system, evaporator, dehumidifier, gaskets, drawer rollers, ice/water LED pad, and not to mention the pitting (rust) on the outside stainless steel. Best part, its not even 5 years old.

We purchased a brand new refrigerator in May. By June, it was not keeping things as cold as it should and the frozen foods started melting. We contacted KitchenAid, which sent out a person from A&E Appliance who stated that it was not fixable and reported this to KitchenAid. We were then told that we had to have someone come for a second opinion, which we have never heard of with a brand new appliance. The second opinion said that it needs a compressor. We were then told that this persons assessment is still not enough and that a supervisor now needs to look at the fridge. By this time, we have lost hundreds of dollars in frozen foods and are unable to purchase food for the week, causing us to go to the store each day to buy what normally could be kept frozen. Months later, we still have no working brand new fridge! We were told a part has to be ordered which takes another few weeks. When it arrived, my husband called and they arranged a time for the part to be installed. The person never showed even though my husband and I made sure that one of us was here all day. The appointment gets rescheduled and the person did not show again. When he was contacted, he stated that he was from the business that made the first assessment and refused to put the part in. We want a brand new fridge, which we paid for, in our house within the next week.

When cleaning up a small spill in my KitchenAid side by side I removed the glass shelf over the vegetable crisper and placed in my sink. Picking up a paper towel I wet it with tap water and started to wipe off the spill when the glass exploded in little small shards that shot across my kitchen. My dogs were sitting beneath the sink and got glass in their coat, my shirt had glass on it. I was stunned. It took an hour and a half to completely clean up all of the glass. Very very dangerous. I did not use any warm water.

As part of a complete KitchenAid appliance package purchase three years ago, we purchased a KitchenAid Fridge Model KRFF707ESS01. Rather than take the specced Frigidaire appliance group that was included with our new home purchase, we elected to spend the extra money believing KitchenAid was a superior product. During the past year, we have encountered some of the inner cabinet led lights not functioning and others flickering on and off. We have determined that it isn’t a simple fix such as a door switch, but rather defective led lights and or an led emitter control board. It appears this is a common problem, however KitchenAid is not acknowledging it as a manufacturer defect.I have read a number of online posts reporting the same issues. The reviewers report having replaced faulty led lights, only to have the same problem reoccur. In one case the reviewer stated they were advised that nothing could be done to remedy the problem. I strongly advise you to not buy a KitchenAid fridge with this led lighting design. Repairs are either extremely costly or impractical as the problem will only reoccur. A highly respected technician in our area has confirmed that this is a common problem with KitchenAid fridges. This is a manufacturer defect and needs to be dealt with accordingly.

KitchenAid stove - KESA907PSS (ARCHITECTSERIES). Almost burned my house down last night - 10-05-2016. Well one of the knobs got stuck on this stove and had a mind of its own sometimes. I worked on and off. Then last night I was cooking on one stove top and baking at the same time all of a sudden the panel got piping hot and started to smoke. Could not touch the panel and I smelled fire and then I lost power to the stove. I read reviews about this particular model and two people said that it caught on fire and they caught it in time. I threw it away and I will never buy this brand again. I paid 1500 dollars for this slide in glass top stove. I dont know why KitchenAid is not standing behind their products. Why dont they admit there is a problem with the stove and recall it. DO NOT BUY KITCHENAID.

3-1/2 year old dishwasher started failing to clean top rack about 6 months ago. Two days ago it completely stopped working. Repairman stated cant be fixed. Turns out wiring burnt (we did not abuse the product). I was concerned over burnt be charred looking wiring so called KitchenAid. It is out of warranty and was not calling them to replace it but out of concern of defect and a fire. After being put on hold for 10 minutes rep came back on line and suddenly knew all about how that happens to all appliances when the control board fails and suddenly remembered it had happened to her. No big deal attitude that it only lasted 3-1/2 years. Hung up as a never again KitchenAid customer. Wish I had researched the company 4 years ago.

We had remodeled our kitchen and bought all the appliances through hhgregg (which is another story). We bought the KitchenAid Architect Series II and have had an issue with the oven making clicking and whooshing noises every 55 seconds. It is the sound of the pilot light igniting in the oven. I have never heard this noise before with my old oven or anyone else for that matter. When we have the oven on, the noise is so loud and annoying! I put in a complaint to KitchenAid, but they told me that that was a normal sound. They sent a repairman out and he also said that that was a normal sound! Who has ever heard a loud ignition in their oven every 55 seconds? The customer service is horrible and the product stinks! Ill never buy from them again. Ill pay more next time and get the Jenny Air appliances. I had them for 18 years and never had a problem! How disappointing! We are stuck with a shabby appliance! Shame on KitchenAid/Whirlpool. Normal? Who are they kidding?

Five or six years ago I purchased a high end Kitchenaid Dishwasher. Three times it flooded my house including once that triggered a substantial insurance claim. To make up for this Whirlpool Canada offered me a discount on a new machine. I accepted the offer hoping the first machine was just a lemon. With the new machine I purchased the CertifiedCare extended warranty.This past July my dishwasher stopped working. I called in and it took almost a month for a technician to come to look at it. He said he would order parts. Now it is the end of September, almost three months later, and I still do not have a working machine and no one from CertifiedCare or Whirlpool has even given hint that they care about solving the problem. I am married with six kids and need a working dishwasher in my house. Whirlpool needs to step up and do something about this.

We purchased a Kitchenaid model KUDS301XBL4 dishwasher about 2 years ago. It appears that the plastic inside the tub is deteriorating and the pegs that hold the rollers for the top rack have broken. I have found this is a common complaint among Kitchenaid dishwasher owners. The parts cost for the repair is about $28 per side plus shipping costs. I did send an e-mail to Kitchenaid explaining the problem and asking them what their solution is regarding the defective parts. No reply at this time. I dont expect them to acknowledge defects or offer a solution based on other complaints I have read . So, I took to finding a solution myself.I examined the mechanism and figured out how it works and had an idea that if I could find the right nylon and stainless steel parts at my hardware store, I could re-install the rollers on a different spot on the sides of the rack. I found all the parts for the four rollers for a total of $7.89 and proceeded with installing them. I had to use a Dremel tool to cut the broken roller pegs off and sand a small plastic ridge flat. I drilled holes and assembled my parts and attached them successfully to each side of the rack (see picture). For each roller, I used a stainless steel screw, washer and lock nut along with a nylon finish washer and a nylon bushing. It works great!It is too bad that Kitchenaid wont stand behind their product, as evident in other, similar complaints. I am not an engineer, but I engineered a solution in one-hour that will last longer than the rest of the original plastic parts in the tub.

I had no idea that the quality of the KitchenAid appliances had such a low standard. This is the third time that I am having problem with my dishwasher. Last year, I spent $120.00 on the door hinge and now problem with the dishwasher not working at all. I called KitchenAid and was informed I will either need to spend another $300 to fix the unit, or purchase a one-year warranty and pay $275.00. Unfortunately, I also have a KitchenAid refrigerator that so far I had to spend over $600 in the last 3 years for repairs.Do I need to keep on wasting $500.00 every 6 months with further service calls and parts? Why would KitchenAid make disposable appliances? They will need to disclose to consumer at the time of the purchase that appliances made by Whirlpool and KitchenAid are disposable, and every year we need to replace them with a brand new unit. KitchenAid is responsible for taking care of my dishwasher. I can no longer invest more money on the defected appliances made by Whirlpool and KitchenAid.

I spent $2000.00 on a fancy KitchenAid range with the touchpad and had it fail on me! When I called KitchenAid, they wanted $150.00 to check it out and I was told that the life of appliances is only about 8 yrs! Wow! KitchenAid is now crossed off my list of worthy appliance makers along with GE! This is my third appliance to break down within three yrs. The other two were GE products, a monogram dishwasher and refrigerator! I cannot believe how, we as consumers, are being scammed by these big companies who offer no help!

At 1 year, the rivets that hold the sliding rails for the top rack rusted out and the rails fell off. I believe the new rails were almost $40 each and I had to pull the dishwasher out to replace them. Then about 6 months later, the wheels for the bottom rack started falling off one by one until over the course of about 3 months the bottom rack is wheeless. Ive just order 4 packs of wheels for another $30. The dishes no longer get very clean.... Ill never buy any Kitchen Aid product again.

This dishwasher kept blinking after one year of minimal use. I kept reprogramming it and it would wash for one cycle and then return to blinking again until about the fifth time. It just blinks now. I dont think I will ever purchase another Kitchen Aid appliance again.

Our kitchen aid refrigerator is just over 5 years old and of course like clockwork, it stopped working. Weve been told that K will pay for a new compressor but the labor will cost $1050. Could that be any more exploitative? When the tech guy was here, he said the labor would be $600 and the part $400...now they changed it to look like theyre being cooperative by saying theyre paying for the compressor but the price is still outrageous because they say the labor is $1050. I offered to pay half of the labor but the answer is no, of course. Really horrible company and product....never again.

I purchased the KitchenAid Gas/Convection Range with AquaLift Self-Cleaning Technology. To put it simply - it does not work. It requires you to pour 1 3/4 filtered water on to the bottom of the range after you remove all racks. Click clean button and poof, in 40 minutes your oven is clean...NOT! I am not a cook. I purchased this oven almost 2 years ago. Ive used it less than 10 times. Mostly for holiday dinners. It just is not that dirty. Tried the self-cleaning feature twice. No difference. It just does not work. I am currently also questioning whether the oven is really working well at all. It takes forever to preheat and lately, more time than usual to cook food. I called customer service as I purchased an extended warranty. They wont come out until I troubleshoot all issues. Their recommendation was to unplug the oven and wait 30 minutes before plugging it back in - to reset the oven. Try cooking something and see if that solves the problem. Havent done that yet at the time of this review, however, I think this is an oven I would avoid purchasing. I know Im going to have to end up scrubbing the inside myself and be forced to use the recommended cleaners and tools or risk forfeiting the warranty. It is a great looking oven. It was recommended to me when I was looking to purchase all new kitchen appliances after a total kitchen reno. I just have a bad feeling about this appliance. Cant imagine what others with families and those that use this oven often are going through regarding the ability to clean it. This AquaLift, low-heat technology DOES NOT WORK.

I am extremely dissatisfied and could kick myself for purchasing KitchenAid appliances. We bought a suite of six KitchenAid appliances for our newly remodeled kitchen six months ago. We installed them four months ago. Last night, I turned on the self-cleaning cycle for the very first time and woke to a kitchen full of tiny pieces of glass. A repairman will come in five days. If this is anything like the experience we had with the new dishwasher.We installed the dishwasher and I ran a load of dishes. All of a sudden, I noticed water gushing (damaged new hardwood floor), faulty part. It was three weeks before it was fixed. I ran two loads of dishes and the door latch stuck. A repairman came out two weeks later and used a tool to pick out the latch. He told my husband to pick out the latch if it did it again. I did not feel so good about that. One load and the same thing happened again. We called for repair, and it is two weeks before they can come out. We didnt hear from them in two weeks, so my husband called the service department and then the salesman. The third week, the part came in and they said the part was faulty. Now we have to wait for another two weeks before they come out and replace the faulty part. The dishwasher is working now and the oven glass exploded during the cleaning cycle. I feel like I lit a match to $10,300. I have read the comments listed and feel this exploding glass is an extreme safety issue. And to think I was so proud of my Kitchen Aid appliances. Why does this company not care about their reputation and customer satisfaction? What a headache and heartache. I wish I could turn back the clock and that money would have gone to another manufacturer that stands behind their product and cares about customer satisfaction.

After using the Kitchenaid Smart Oven Plus powered attachments I found the following flaws: 1)Steamer attachment - Steam will escape and cause the oven to shut down. The only way to reset it is to let the steam completely out and turn off your circuit breaker. Kitchenaid did not design the control panel to be steam proof so you cant use this attachment without issues. They do have the ability to do this but wont respond. 2) Grill - You cannot set the attachment beyond a certain temperature so you cant grill like you can on an outside BBQ. 3) Baking Stone - It is difficult to clean if anything gets stuck on it. Again, your temperature for this attachment is limited so you cant bake a good pizza.4) The temperature is lower than indicated, especially in the lower part of the oven. When the oven reports the temperature to be ready, you need to wait an additional 15 minutes for this to take place. Calibration is a joke.

I just replaced my 29 year old dishwasher. Things just don’t last anymore.??? I’m very impressed with the improvements that have been made in the 3 decades. I can easily put more items in and they come out cleaner.

I purchased a KitchenAid dishwasher (KUDP02FSPA3) for my new home. We moved in December of 2007 and by December of 2011 the door to the dishwasher broke. It would no longer spring close. Because this model has the customizable front door to match the cabinets, the door is extremely heavy - heavy enough to kill a small child when the door broke. We immediately removed the cabinet part so that my 12-month-old baby girl would not be harmed or killed by this defect. I called last week to have someone come out and fix my dishwasher door and the cost was $164. Now that I am doing the research online, I see this is a common problem with this dishwasher model. Why does KitchenAid continue to sell a product that has a defect which could kill a small child? Why did we have to pay $164 to fix this common problem? Is KitchenAid waiting for the defect to actually kill a small child before coming up with a permanent solution to the problem?

Completed kitchen remodeling approximately 6 years ago. Purchased all KitchenAid appliances for kitchen. Within those 6 years, ice maker has been replaced twice. Freezer quit working last year and was repaired at our expense. This year, refrigerator isnt cooling. Dishwasher door now falls open to the floor as it no longer has spring or whatever holds it up. Microwave had to be serviced a few years after purchasing and had to be totally replaced two years so as some element in it started burning. I will NEVER EVER buy another Kitchen Aid appliance.

About 4+ years ago, I purchased a KitchenAid KUDK03FTSS dishwasher. Just before the warranty expired, I complained that I had to have service done on the dishwasher because the pump needed replacement. The service man said the problem was Kitchenaid (who I think is Whirlpool) designed dishwasher so the silverware basket was located too close to the heating element in the back portion of the machine. The pieces of plastic crumbled and fell into the dishwasher, and caused the pump to fail. I immediately complained to KitchenAid. They immediately sent me a new basket. I asked at that time if their design was a flaw, and should these dishwasher be recalled. I was told no design failure, just basket worn due to silverware. We place all our silverware in the basket with the handle down so there is never a cause for anything to cut the basket. I have done this for 25 years with all my dishwashers. Well, now, I have to call a serviceman in again and yes, there are holes in the basket where the heat prematurely eroded the plastic which fell into the pump area. I called KitchenAid to see if they would send me another basket. They said, sorry, Charlie but your warranty is up. Over the past 35 years, I have owned KitchenAid dishwasher. Back when Hobart owned KitchenAid, they cared about quality. Unfortunately, Whirlpool only cares about shipping bad designed products. For sure it was a bad design, but I doubt if any consumer protection agency can do much. These companies are not only located outside the US, but the Federal Government cannot do anything about this poor workmanship.Maybe someday in the future, there will be a US engineer and entrepreneur who has their head on straight to design and manufacture a dishwasher in the US again. Until then, I suggest strongly that everyone wash their dishes the old fashion way in a sink until a company can start designing and manufacturing a quality dishwasher here in the US.We really deserve to go back to the old method of washing dishes by hand until this happens. Might take another 2 or 3 generations though! Fed up with the lack of quality of everything sold in the US.

Redid my kitchen with my dream kitchen and replaced it with all beautiful KitchenAid appliances. Replaced dishwasher after 5 years that was 6 months ago. And now looks like I am going to have to replace my double wall ovens after reading everyones comments on the e5 f1 costing $700. I might as well go buy new. And by the way I replaced my dishwasher not with Kitchenaid. I will doing the same with my ovens.

I purchased a KitchenAid stainless steel dishwasher on 5/9/2009, model number KUDX03FTSS. As of now, the stainless steel is rusting. How can this be? All of my other stainless steel appliances are over 10 years old and they are not rusting. The bottom line is KitchenAid is using a sub quality of stainless steel in all of their appliances. I called KitchenAid and they said there is not a warranty for finish on their appliances. How convenient is it for KitchenAid to reduce their cost of materials by using substandard stainless, then say there is no warranty on the finish? That is nothing but a ripoff by KitchenAid. I will never purchase a KitchenAid appliance ever again. I hope who ever reads this seriously considers another brand.

We had a designer brand name dishwasher previous and it lasted just a few years and we gave it up. We returned to our earlier experience and bought the KitchenAid and have never regretted it.

A $600 microwave should last more than 16 months. Ours did not. The LED start button is inoperative, making the unit worthless to us, because of a 1 year warranty. Find another manufacturer or purchase a longer warranty.

Do not buy if you think about service and warranty. I got it and had issues from the first month. I neglect to report it timely. I rented my house and my tenant started using it. They had the same problem. We called the service. They said there was a delay receiving hot water: we need to reset it. They charged me $120. In two weeks this time, they said motor is faulty and it is out of warranty. I decided to get rid of it and purchased a new dishwasher. They did not responded positively. I even told them to come and check if the machine has factory faulty. They said no. DO NOT BUY IT. I had a much better warranty experience with other companies.

The dishwasher has clean and simple design lines. Before this dishwasher I would have the TV volume up very high. I don’t have to do that anymore. I don’t have to pre treat my dishes or pre rinse. The clean dishes looks like I have done them by hand.

Was 13 months old, basket was always temperamental, shakeup. When repair person came he knew the runners had to be replaced. Said Kitchen Aid has a kit to order and he has seen the problem before. Asked him why we were not contacted for a recall and he said they only recall for bigger issues like electrical issues. Called Kitchen Aid. They were more concerned with the date of purchase than the DEFECT!!! Told them I had an extended warranty and they said they didnt know why the repair person would say those things... Told me to put a claim for damages to broken dishes through whomever I bought the extended warranty... Should have been a RECALL KITCHEN AID!!!! They sent me a claim form for damages... Lets see what comes next!!!!

Purchased KitchenAid Architect II 24 45 decibel built-in stainless steel dishwasher in May 2014. Problem with lower basket wheels falling off. This has happened twice, with the last time two wheels fell on to the heating element and burned up. A week later the burnt smell is still in the machine. Whirlpool, who makes this, said this is not considered a hazard because even though it burned up the plastic wheel, it did not cause a fire. A ridiculous answer! I suggested better fitting wheels are needed along with a screen over the heating element to prevent anything from landing on it. They wont do anything, even replace the wheels, because it didnt catch on fire!! Buyer beware - poor product, poor customer service!!

May 2011, I purchased a French door fridge, with bottom freezer. After several service calls, they finally changed the main electronic board on December 2011. However, this is the end of February and once again everything is freezing in the fridge compartment. I raised the temp to 40 degrees and it is still too cold to touch the food. I spent multiple thousands for Kitchen Aid Fridge, Oven, DW and microwave, at this moment, the fridge is the worst of them.

We purchased a refrigerator, stove and microwave in 2011 from Spencers in Az. The stove oven door and drawer are not lined up properly. Oven door is 1/4 inch off with other side. The misaligned door is 1/3 inch off with the misaligned drawer. It looks like a half inch when looking at it. KitchenAid said it was within company standards and Spencers said if they took everything back people complained about, they would have a warehouse full. We will never do business with Spencers or KitchenAid again.

We bought a brand new KitchenAid 29 cu. ft. French Door Architect Series II and it would not work right from day one. The ice maker is a joke and the freezer will not cool... Our ice cream was liquid by morning time. Luckily we didnt put everything in there after we thought something was off about the freezer. WHY in the WORLD would KitchenAid sell such a piece of junk to their customers. I bought this thinking it would be good quality, but all I have is headaches. I hope I can just return this and get something else...SOON!!! I would love to know if there is ever a lawsuit over this fridge because I would sue-thats how bad this fridge is.

The KitchenAid refrigerator we recently installed (1 week ago on 08/06/2020) model KBFN502ESS02 - a built-in model (at about $9,000.) does not hold -5 degrees F in the freezer. Some of the foods we use like that temperature. The documentation about the model in the User Manual says the set point for the freezer is -5 degrees F to 3 degrees F. We set -5 F into the system. We today 8/12/2020 had a service tech (factory authorized) check the freezer and he found that the average temp in the freezer from the diagnostic panel showed 0 degrees F over the last 10 hours. The factory rep he talked to said that was within specs. There are no specs in any document other than the set point can be as stated above. DO NOT BUY KITCHENAID. Their products look good but don’t believe any documentation or specs.

We had the worst experience with a Kitchenaid dishwasher. I made many attempts in calling them and nothing was ever done. All they did was they send me the same technician over and over. Today we had the technician come and he recommended to get a simple model and not to go with the KitchenAid brand. The sides of my kitchen where the steam vents are in the dishwasher, they are destroyed them completely.

A little less than three years, we bought a high-end KitchenAid stove at Sears in Sarnia. I cook and bake a lot. I like to use the convection oven as well. However, right from the start, the fan seemed to be kind of noisy. When, after a cleaning cycle, the door did not open, I was very upset. They came out to repair it, and the repairman suggested that I should not clean it on a long weekend. He fixed it and the very bend fan from the convection.Today, remembering the affair, I did all my baking first and did the self cleaning. Once again, the door did not open at the end of the cycle; the front panel is also not lit at all. Paying this much money for an appliance and have such a let down is intolerable. Why is there no recall of such non-functioning appliance? These stoves should be taken back. I need to call them to come out and fix it once again. I have never had such unreliable appliance in all my life and I am certainly not recommending KitchenAid to anyone.

The oven door locks and unable to unlock. Had a technician come in and advised it is unfixable. Very disappointment with KitchenAid stove.

I purchase a KitchenAid dishwasher in 2012. It was one that costed us about $900 to $1200. I cant remember the exact amount. I have had it for 3 years and its been one thing after another. First, the top rack holder had to be replaced so I replaced that. They did make the newer version a lot more sturdy than what it was before. Then it just stopped washing. I found out that the dishwasher food processor had just came apart. I opened it all up and its just in pieces. So I replace that and not even a month later now, no power on the stupid thing. I cant afford to keep repairing this stupid thing so I bought a whirlpool and have so far no problems. The dishwasher has a 5 star review from over 500 people. Yep, all whirlpools from now on.

It was terrible. I purchased a dishwasher (model KUDS30CXWH) 10 months ago, and its been one problem after another. After a few months, the buttons stopped working. A few months later, it would rinse, then the rack wheels broke, and now it wont run at all. I replaced the card but I needed a bar. Of course, it takes a week to get the bar. KitchenAid doesnt care.

Its not enough to say - I will never use another Kitchen Aid appliance, or - Ill tell all my friends to never buy this product!!!!!! If you have purchased a Kitchen Aid dishwasher with its cheap plastic material, that when heated by the heating elements become weak and crumble apart, you need to know that this is very wrong and against the laws and rights of anyone who purchased this product. That means that it is your duty to call the Whirlpool complaints department and let them know that they have broken the law!!! And that you wont stand for it. I have called and asked to speak with the highest level (supervisor). She asked me for my full name, phone # and address. I asked her a few questions: 1) Where are the dishwasher manufactured (not assembled)? She did not know. 2) What is the plastic made of (knowing that she would not know) asked then can answer these question for me, she did not know. 3) Why are there so many Model #s for the same dishwasher? She said only the manufacturer can answer that question (and she has no idea who that is). I told her that on the Consumer Affairs website, there are 548 complaints on the same or similar issues that I am having with my 1 & half yr old dishwasher. I explained to her that when the plastic gets hot, it weakens and parts start to break off. I was told that they have not had any complaints. I gave her the website and asked her what she was going to do about it. She said she would record the information then pass it on to her supervisor (who I had already spoken with and was told that there was nothing she could to for me). I said that I would like her to email me a copy of that report. She explained that that was not possible. I asked her for her name. She replied - Kathy. I asked her for her last name and she refused. I asked for a phone number where she could be reached and she refused and said it was against company policy. I replied by saying - Kathy, did you ask me for my last name, address and phone # when I called? (yes). I finished the conversation by saying - Kathy, you get to hide behind your comfy, corporate desk protected... while the rest of us get to buy your plastic crap and have no way of getting any compensation. Thank You Kathy!!! I am now in the process of taking Whirlpool to court. I have all the proof I need to prove that Whirlpool is negligent. Im not doing this to have my dishwasher repaired for free parts included (which the company Corbeil where I purchased the dishwasher has agreed to do). I am doing this because it is the right thing to do and I wish more people would do the same...

Built-In Double French Door Refrigerator, Side By Side, Freezer Drawer Bottom. 1 Year Old, $10K Unit. Five service calls on the doors that dont close or seal properly. Door springs replaced 4 times. Last a couple of weeks, then break again. Service is subbed out to an appliance repair outfit that could care less. Poorly made product. KitchenAid should replace this box under warranty, but they keep giving me the runaround. Bad product. Bad Company. Bad Service.

I purchased microwave/hood combo in October 2010, installed November 2010. Unit no longer heats as of mid December 2011. I did not want microwave in the way for holidays so I contacted them in January. The second service call, I was informed element inside turntable had melted. After several more service calls, six all together, my unit has been on my dining room table for almost three months. Repeated calls to Whirlpool/KitchenAid have gotten me nowhere. I maintained that if part of the turntable melted, unit must be defective. I now have to pay $315 to get the unit replaced. They have no concern that I missed work on numerous occasions for failed service calls or that I paid for initial service call. If product is defective, it should be replaced without further cost to me.

First year microwave breaks, not getting anything hot. Have to pay for service call two weeks past warranty. Kitchenaid paid for parts not service call. Four months later, same problem, I have to pay again for service call and labor, not sure about parts. I’ve decided to never buy Kitchenaid or its other companies Whirlpool etc.. I have a total Kitchenaid kitchen, never again, bought a Samsung. It takes a long time to build trust and respect, it doesn’t take long to lose it. Good luck Kitchenaid.

Stove - YKERS303BSSO: The coating on the control panel is peeling and the lettering is part of this coating, this is going to affect the readability of the knobs in future if we cannot get this resolved. Since we bought this stove in June 2014 should be a warranty on this type of thing happening? We always use only mild dish soap and a soft cloth to clean it. Sent an email to http://www.whirlpoolappliances.ca twice, second time included photos was told both times, that they recommend calling into their Customer Service Department at 1-800-807-6777 to have this issue resolved. Theyll probably tell us to change the control panel, which will probably cost 1/3 of what a brand new stove would cost. Also, the oven inside window has water/steam stains, how do we get them clean?

My KitchenAid dishwasher KUDS35FX is 18 months old and has worked fine up until a few days ago when it just went completely dead. I didnt buy the extended warranty because I think they are a ripoff. I immediately started looking online for possible causes and solutions. It quickly became apparent that the problem was the thermal fuse. I called KitchenAid customer service 3 times, trying to get them to give me some help and what I got was ticked off. The first thing they told me was that I need to make sure and run hot water into the sink before starting the dishwasher, because the thermal fuse was overworked trying to get to the optimal temp, in this case when it failed, because I had the dishwasher set to sanitize.My issue is that I almost always start the washer right after dinner when I have finished rinsing off the dishes in hot water. They argued that the water needed to be 105, and I asked who in hell stands at the sink with a thermometer checking water temps? Why would they use such cheap and flimsy parts on a machine that I spent close to $900 on? If theres a sanitize feature, why do I have to worry that its going to wreck my machine? Next, they asked what temp my hot water heater is set at and did I know it was supposed to be 120. I said thats right where mine is. Then they suggested I could still spend $250 for their extended warranty and my repair would be covered. They refused to acknowledge that they are fully aware of these defects and refuse to make good on them. It is their cheap design and my tough luck. I called for repairs from the business that I bought the machine from and the tech told us that there is a harness kit for the wiring to keep it stable that KitchenAid came up with, because the connections would become loose from vibration, thus burn out the fuse when it became stressed. So they know they have a problem and they created a fix for it, but dont just fix it on their dime. They expect the consumer to do it. The service call and part cost me $170. I dont have money to waste on this ripoff.

Our KitchenAid stainless bottom freezer refrigerator stopped working on 5/25/13. My husband called the warranty department on 5/28/13 (KitchenAid office was closed from 5/25 to 5/27). They asked him to fax/email the warranty info on our side and instructed him to call back 2-3 business days. My immediate response was they are playing games. Perhaps we should just give up and buy a new one, no more KitchenAid... They finally gave us an appointment for 6/2/13. Who knows whats going to happen. Terrible warranty program. Its a refrigerator which is needed to keep food from spoiling and to store essential nutritious food for good health. Sigh... KitchenAid sucks.

Purchased the KitchenAid KUDS35FXBL3FXBL3 dishwasher for approx $1000. In less than 2 years time, I have had the upper rack rollers break numerous times, and have replaced 4 sets at this point. On one occasion, the small plastic roller part that tends to break ended up falling into the drain system of the dishwasher and jammed the mechanism, causing it to immediately shut down. To date, all but one set of rack roller parts have been replaced under warranty, and the problem with the jammed motor/pump was also fixed under warranty. HOWEVER - the repeated breaking of the rack rollers in an ongoing and unacceptable problem. Despite the evidence, KitchenAid customer service claims there is no known issue with these parts. I offered to send them a link to this site, which details numerous complaints for this very issue, but they declined. AVOID PURCHASING SIMILAR KITCHENAID DISHWASHER MODELS.

I have a Kitchenaid Range KGSC308LSSO, purchased in 2003. Main control panel needs to be replaced again! The problem is that the range turns on by itself (500 degrees - time sets for 33+ hours!) This was witnessed by unbelieving repairman on 11/07/2011.This will be the third control panel in this expensive unit in 7 1/2 years. I contacted Kitchenaid and they were very sorry but would do nothing due to the age of the machine. This brand is just too costly and dangerous to own.

KUDS35FXSS 8 is a Kitchen Aid dishwasher that has an obvious design flaw. We had a similar style KitchenAid at our last house which was a good product. When we built our new home we got the next level up. In less than 1 year, 3 of the small plastic pairs of clips that hold the wheels on the upper rack broke off. Today the dishwasher would not go into wash cycle and after watching a how-to video I found 3 of the little plastic triangle clip parts in the food chopper. One was wedged against the chopper blade. I removed it and the dishwasher works again. I wired on the top rack wheels with stainless steel wire. The lady at the service center said that they hadnt heard of the problem. We bought it a few months before installation so nothing was going to be covered. A friend just had the same rack breakage issue and several people on this site say so too. CHECK THE SMALL PARTS WHEN YOU BUY!

The oven shuts off in the middle of cooking, then will turn itself back on, anywhere from 30-60 minutes later. My husband and I moved into our just built, brand new home with brand new appliances, in November 2006. We have a Kitchen Aid Gas Range Architect II series (model KGRS807SBL00). The first Christmas meal, in December 2006 was just shy of a disaster. The fan in the oven kept making a horrible sound, and then the oven shut off in the middle of convection cooking the prime rib roast. Luckily, the neighbors let us use their stove to finish the roast. Our entire family and guests didnt eat, until almost 9PM that night. The oven, of course, turned itself back on within an hour or so. A service call the next day showed nothing was wrong with the oven, and the issue couldnt be replicated. Next year, no noise from the fan, but during the Thanksgiving dinner, the oven shut off again unexpectedly, in the middle of a regular baking cycle, and of course, with no warning, turned itself back on 30 minutes later. This year, same thing happened, and again, a $30-$40 service call to a licensed Kitchen Aid technician shows nothing. The diagnosis cant be made, because the issue cant be replicated. The oven is barely 5 years old, and of course, is outside of the warranties, and frankly doesnt get much use. Its just me and my husband cooking. Were often not even home, and Ive used the self-cleaning cycle twice in the 5 years weve had it. This oven doesnt take a beating in terms of use, and certainly seems to be a faulty product. The only similarity to the occurrences when the oven shuts off appears to be that several burners are going while the oven has been on for a while. Its like the system overloads, which sounds like a computer or electrical sensor issue. Ive spoken with several customer service agents, and and ultimately, my calls to Kitchen Aid are a waste of time. They continue to recommend more service calls, which cost money every time, with no resolution and a stove Im stuck with, which wont work consistently. I will never buy another Kitchen Aid/Whirlpool oven again, and will tell everyone who will listen what a crappy product they produce, and how they wont stand by them.

After a spill over from a fruit pie I tried cleaning my oven for the first time. I followed the directions...wipe up the spilled water in the bottom of the oven and the very short cleaning cycle. The water was not even hot when the cycle finished and absolutely nothing happened. The convection oven does not work so its a very expensive stove that I could have purchased in the 60s. Shoddy product.

We bought a high quality KitchenAid dishwasher that leaked all over the floor 18 months later. Turns out the pump/motor assembly must be replaced at a cost of $459. The company could not care less. Im going to replace the motor assembly myself and I will never again buy KitchenAid even though my newly renovated kitchen was completely stocked with KitchenAid appliances. Ive never had such a problem with any other appliance in my 40 years of home ownership.

KitchenAid Dishwasher Model KUDS30FXSS. As a consumer I am loath to leave a bad reviews, but I have to say I am very disappointed in my dishwasher and in KitchenAid as a company. Within the first year a plastic valve sprang a leak and flooded my floor. A year and a half later the upper rack is broken, and the motor has failed. The failure of the valve and the rack I ascribe to bad design and/or use of substandard materials, but the motor problem is more complicated. The factory service technician wanted to assign blame to me, by suggesting that something hard left on the dishes of a piece of broken glass ruined the motor. I have been careful with this machine, and always rinsed dishes before putting them in. Before this I had an Asko Cylinda which got me in the habit of pre-rinsing. Over the 12 years I owned that dishwasher I had to call for service two or three times when small particles would get past the filters and obstruct the flow of water to the spray arms. The remedy was simply to remove the obstruction, however. It never required a new motor. The KitchenAid is supposed to have a soft waste disposal built in. One would think that would provide more protection, but, in fact, it not only failed to prevent a particle from getting in the system but there was nothing to keep it from destroying the motor once it got in. That suggests bad design to me. Secondarily, I have an issue with KitchenAid itself. At every turn the company pretends that customer satisfaction is primary. Their people are always polite, but they are just the velvet glove that hides the iron fist. But the bottom line, in my experience with the company, is that its strict and narrow policies mostly let them off the hook and out of responsibility when something goes wrong. Their service personnel express sympathy but tell you they are bound by policy. Of course, they are KitchenAids people, and KitchenAid makes the rules that make it difficult for the technicians to do right by the consumer. A company that values repeat business (I bought a KA refrigerator from the same designer series first) should barricade itself behind its rules only in the most flagrant cases of consumer negligence or abuse. I paid over $900 dollars for what I thought was a best-quality, USA-made product that would last and had an excellent company name behind it. I used it regularly and took good care of it. A year and a half later, the company will only fix half of whats now wrong with it, and informs me I am responsible for replacing the motor at a cost of $450. For that much money I could buy a Maytag (also made by Whirlpool) or I could triple that amount and get another Asko or a Bosch. Certainly, I will never trust KitchenAid again.

Ill try to keep my comment short. We built our house two years ago; and all new Kitchen Aid appliances were bought. I have no complaint with any of them (refrigerator, microwave, dishwasher) except for the range. I have had difficulties on occasion when the oven would not preheat. However, my biggest complaint is with the Aqualift self-cleaning feature. It doesnt work well at all. I dont want to scrape, scrub, reach into the oven to clean. Im getting too old for that. I truly would not recommend this type of range to anyone unless they want a workout cleaning the oven.

2 yrs old french door bottom mount fridge model KFIS29PBMSOO, freezer stop working. Too many problems with this high tech fridge. A service rep. fixed the board/water/noise in the summer. Ice maker working intermittently.

Brackets keep breaking on the glass rack. Very unhappy with this. Currently can’t run dishwasher and only a year old. Other than that this has been a great dishwasher that we use every single day. I love the options. Not happy about broken brackets repeatedly.

Very expensive high end refrigerator bought. 3 years old and I just paid over $800 to get the ice maker to work again. Suppose to be high end but stay away.

We bought a KitchenAid dishwasher in November 2015. Less than 4 years later its not working. Terrible product. I will never buy KitchenAid again. Tried to get help and they told me to call a technician. Im not buying a product of over 700$ for it not to last. Very disappointed.

I purchased a KitchenAid double oven, microwave and dishwasher between March and April this year. On May 24th, the day school was out for the summer the microwave stopped heating. I called customer service and they said that a replacement would be delivered soon. Called again on 6/5 as nothing had come as promised and was told I was just approved for replacement and that I would get it in another 5 to 7 days. Called today 6/13 and was told the microwave is on backorder and they are not sure when I will get it. No effort to resolve the situation. Other than, I will talk to the expedite board and get back to you in 24 hours.It is ridiculous to go without a microwave that you paid over $600 for and it lasted less than 60 days. I saw that the retailer I purchased the unit from has some in stock and asked the customer service rep to get one from them and get it installed this week. Rep had to get approval for it. Looks like I will get to go yet another week without a microwave. The way it has been going, I will have to call them again to get nowhere. DO NOT BUY KITCHENAID!!

I purchased this dishwasher about 5 years old based on the BEST BUY rating from Consumer Reports. What a mistake. I have had at least 4 issues with the left side of the top rack coming off the rails or leaning which causes the dishwasher not to start. The first time it happening the dishwasher was under warranty and the service guy said that this happens often with this model. Why has KitchenAid not recalled this machine?

INCREDIBLY BAD PRODUCT. The good: the format of a small micro/convection oven over a large regular/convection oven works nicely for me as I can cook almost everything in the small oven and don’t have to waste energy on large oven except special occasion cooking. That said, the electronics went out twice in first couple of years, had to be completely replaced. Now I’m never sure if oven will work on any given day.NEXT: the first time I tried to use the clean program, about a half hour in, I heard a very loud crash and rushed in to kitchen to find glass all over. The whole glass door exploded all over. I eventually got it replaced but now am afraid to use it again. The bell which signals “done” and the timer itself long since stopped working and the turntable doesn’t turn. Today I found the glass top part of the turntable in pieces large and small. I’ve no idea what caused this. I’m worried that a replacement brand will not fit into the custom built in space I will have when I try to dump this headache. P.S. Read my review of KA dishwasher and immersion blender, neither of which are favorable. I have learned my lesson about this brand.

Having purchased an entire kitchen of KitchenAid products, almost every one has broken - more than once. While the company repaired the dishwasher handle the first time it broke, they refused to fix the dishwasher door, which flops open dangerously. I paid over $100 to have it fixed. Now that the microwave, which comes on spontaneously, must be fixed, theyve agreed to that, but not the handle that broke off or the faux-stainlesss/plastic vent cover that ironically fell on the floor days after the call. Turns out they now admit that the dishwasher door is a chronic problem and theyll cover it, but in astonishingly rude tones, refused to fully fix or replace the microwave, even though I have paid for defects they now acknowledge. Instead, theyve invited me to buy a new vent cover at my own expense, investing additional money in their plainly substandard appliances. Or, I can buy a new KA microwave = at 15% off?! (To be clear, I would sooner set $649 on fire and use the flame to cook). Customer service is, at the corporate level, woefully rude and disinterested in customer satisfaction, seemingly having deaf and numb to their growing number of angry consumers. Amazingly, I visited a friend in L.A. who has the same appliances. And the same problems.

We purchased our gas oven/stove two years ago and I am so worried that we are going to have a gas poisoning or explosion in our home. The knobs are very easily turned on. You can brush up against it and you wont even know until later on when you smell the horrible scent of gas. I was cleaning my stove earlier this morning and came back inside the house and I knew right away that the smell was gas and sure enough the knob was ever so lightly turned to the left and emitting gas fumes. Im not sure if there is a recall so this is my first step.

I filled out a complaint on 10/11/11. The repairman was at my house and replaced the motor on my 7-month-old dishwasher after waiting 3 weeks to get it repaired. It is now 10/21/11 and it broke again today. It was the same problem as last time, so I assume it needs a new motor again. I have to wait another 12 days just to get a service person to come out and look at it. Ill then be at over a month with a non-working brand new dishwasher in a 7-month period.

I purchased a model KDTE204DSS0 KitchenAid dishwasher on 12/1/14 for $717.48. It has a stainless steel tub. Fourteen months later (2/16) we had water leaking from multiple pinhole leaks in the stainless steel tub where the base of the tub is molded to fit the screen and pump. I called Whirlpool and they said that the tub has a lifetime warranty but it can only be installed by an approved appliance repair facility. That cost $150.00 (I removed, delivered and installed the dishwasher again myself). On 9/8/16 (seven months later) the dishwasher is leaking again and has again the same pinhole leaks in the new tub. I get a slight shock when I touch the screen inside the tub and believe there is a galvanic reaction going on that is eating up the stainless tub at its thinnest area.Since I find no other reviews mentioning this problem, and it appears to be more than just a tub problem but a unit problem (i.e. a lemon), I asked Whirlpool to replace the unit. As you already know, they said no but would replace it for $17.00 less than I paid for the last one less than two years ago. If I paid another $150.00 to replace the last tub that would be about $500.00 a year to wash a load of dishes every other day. This negative review is as much about the manufacturer as it is about the faulty dishwasher.

Spent $3200+ on a KitchenAid Refrigerator model KRMF606ESS00 about a year ago. Weve had nothing but problems since we got it. The ice/water dispenser would stick open and wed end up with water and ice on the floor. The tech that came out to fix it said that theres a known delay between the ice/water paddle dispenser and the computer that tells the refrigerator to dispense the water. He did replace the unit because it was sticking as well as the delay. This helped. Would have been nice to know this before ordering the refrigerator. Shortly after that was fixed we noticed that our food was spoiling prematurely and the refrigerator seemed warm. I bought a thermometer and found out that the inside of the refrigerator was around 46-48 degrees when it was set to 33. This time the tech that came out said that the paddles werent opening to allow cold air into the refrigerator. Fine. Ordered a part that came in in a few days and installed it. The tech cleaned out pounds of ice that had built up in the back of the unit between the fridge and the freezer when he installed this part. Because of this, all seemed well for a week or 2 until the thermometer started climbing up again. However, this did not fix the problem. This time the tech that came out said it was a gas solenoid that needed to be ordered - something about the coolant not distributing properly between the freezer and fridge. He said it would be a few days to order the part. Five days later I call the repair people again and they said they had to order the part from the manufacturer and it would still be another week or 2. Um HELLO we have spoiled food here and it is the week before Christmas. Nothing we can do maam. We can overnight the part for $100. Call the manufacturer to see if they can do anything. Called the manufacturer WHIRLPOOL who proceeded tell me that theres nothing they could do - they got the order for the part - it IS IN STOCK but they havent shipped it yet. Well, can you overnight it? That is not our policy maam. What? Why not? Can I talk to your supervisor? No maam, that is not our policy. I can email my supervisor and they will get back to you in 24-48 hours. Are you kidding me?? You dont have a supervisor? That is not our policy maam. If he called me maam one more time I would have jumped through the phone. So basically, screw you, customer. Were not helping you and dont care if your food is spoiling. Oh, but were happy to take your $100+ per year to extend your warranty on this piece of crap. DONT BUY KITCHENAID IF YOU WANT GOOD CUSTOMER SERVICE. THEY ARE THE WORST.

I was a builder in Atlanta for 30 years and used KitchenAid in my homes many times. I installed a high-end side by side just under 2 years ago in my personal home and it suddenly started forming ice. When the technician came he took apart the panel with the cooling element and found the sealer wire which was installed crimped had destroyed the thermistor which regulates the fridge. When I called KitchenAid their answer was over time, which could be anywhere from a week to years the parts or the way it was put together could break down. Really? I never would have used KitchenAid if I knew they weren’t responsible for the correct installation of original parts. It cost $325 to fix.

Our kitchen aid refrigerator, which is just about 5 years old, has an offensive odor when the door is ajar. We have thoroughly cleaned it with baking soda, have 2 baking soda canisters in the refrigerator. Two different repair people (factory authorized) have come, but done nothing to resolve the issue. In fact, they made matters worse, by not re-positioning the refrigerator correctly when leaving. We need assistance. We should not have to discard a 5-year old refrigerator.

Just 4 years ago we purchased this dishwasher (KUDC101XWH) to replace another KitchenAid that we had for almost 20 years with literally no problems. The new dishwasher has now stopped working for the 5th time. The first time was under warranty but the fuse was not covered - of course. Then it was the latches, and then it was the wiring which was fixed two months before. We have spent about what it cost to purchase it in the first place. KitchenAid has been no help. I was told by one of the service people never to buy this brand nor Whirlpool nor Maytag. I am attempting to get my last service payment refunded and will go out today to buy another dishwasher - not KitchenAid!

I remodeled my kitchen, and purchased the Kitchen Aid Duel Fuel Range in March 2014. I used the oven for the first time to bake chicken on June 9, 2014, and the INSIDE GLASS TO OVEN DOOR SHATTERED!!! I called KitchenAid, they will pay to replace oven glass with same type of glass. Does this make sense?! I questioned it, and they said to speak to the repair company.

KitchenAid Diswasher Model #KUDS35FX5S5- We purchased our dishwasher in 2013 and at the time purchased an extended warranty. Since the purchase we have replaced the top rack rollers 3 times. The on/off controls on the top of door shorted out -- had to have service on that. On top of all this I have to pre-wash my dishes in order for them to get clean. I want my Maytag back!

Change filter came on in 1 month, water looked OK. Next month CF came on again. Replaced filter $39. 1 mo., CF again, now just reset each month. 2 drawers fronts broke off. Repaired & reinforced little weak tabs that held top of door front. In 18 mo., Ice Maker quit. Checked with LED Checker, LED not on. Bought bag Ice, part alone $125. Now 20 mo. cooling coil in low temp side frosts up if temp over 40 F. Looking for new refrigerator.

After a thunderstorm and lightning storm our power went off. When the power came back on we had no control board lights - none. Oven not working. Called repair man - waited 2 days for new power board and replaced it. Same thing - no control board. Now he says he needs to change the control panel boards because he gets no power out from the power board he changed out that supplies power to the control panel on top. Well about $200 for a board he changed and they want another $400 for the control panel if we decide to order it. Those prices are w/out labor costs. Min $85 just for call out. Even if I replace this part that is no guarantee that the oven will work again. I could spend as much money as it cost me originally to buy it. It was not cheap for the Kitchen-Aide Superb gas range when I bought it. I can remember when people would replace ovens/ranges just because they wanted a newer bigger one. Not that anything was wrong with the one they had, they just wanted to replace something that had already given over 25 years of service and was given to someone else just starting out in life. Where is the quality of workmanship that used to be in the things that we build and buy? It seems like today the young people have been brainwashed into thinking that when something breaks it is to be thrown away and replaced. I guess the manufacturers have succeeded in instilling a real throw away society in our youth. It dont work, throw it away because it will cost you more to fix it than its worth. Rule of thumb should be if something is going to cost you about 50% of what it originally cost to buy it --- then throw it away. They dont make anything like they use to.

Very quiet, does a great job of cleaning dishes, even those with baked or dried on food, and has good capacity. It has an added top shelf for flat items. The dishwasher is very quiet. I’ve had no problems with this dishwasher.

The freezer works ok but no matter what the refrigerator setting is set to, it does not keep cool (about 50 degrees F). I have tried replacing the fan, thermostat, and even the control board without making any difference. This is one refrigerator to stay away from.

I have the KDTE334GPS from KitchenAid. I cannot express enough how much I love this dishwasher. It is so quiet you dont even know it is running. It gets everything clean. The door is great. With barely a push it is closed. I dont adust the height of the drawer very much or at all. I love the 3rd shelf too! Would buy again and again!

I had a KitchenAid Dishwasher KITCHENAID CLASSIC SERIES KUDC10IXSS installed in February of 2012. I live alone. I run the dishwasher two or three times a week. This unit has failed on me repeatedly. It failed while it was under warranty, then it failed again right after the warranty expired. KitchenAid took care of that repair, but that repair failed again today.This units control system is faulty. I dont know if it is a design or manufacturing issue, all I know is that if you are going to spend your money on a major appliance, KitchenAid is not the brand to spend it on. I doubt I am alone with this problem. I believe a class action lawsuit should be filed against KitchenAid and that purchasers of this product should be provided with a five year parts and labor service plan at no cost.

We purchased a KitchenAid 48 KSSC48QT side-by-side (for custom wood panel inserts) from Factory Builder Store along with a double oven, microwave, dishwasher, all KitchenAid. The ice maker on the refrigerator has been a joke from the beginning. The ice dispenser does not work, we have to open the freezer door in order to scoop ice out of the bin on the door. When we open the freezer door, ice always falls all over the place and the flap on the ice maker is covered with an ice sheet from some type of leakage. After reading everyones comments, I have come to the conclusion that KitchenAid will soon be a past American icon and I will need to just take it as a loss. What a shame.My kitchen is the heart of my home and was featured in our local newspaper and in MySanAntonio website. We entertain almost every weekend and I make sure all my guests and neighbors know that I dont have any ice from the freezer in my kitchen because KitchenAid makes a lousy product. Guests have naturally gone to the freezer door during a party to dispense ice and I just comment Oh sorry, it’s a KitchenAid. Don’t ever buy one! Please get the ice from my old freezer in the garage! (which for 10 years has worked perfectly). Some of these folks are CEOs, contractors and custom home builders so I make sure the word gets out. I guess I will just keep a supply of bagged ice till the whole ** thing gives out on us, which I expect will happen soon based on everyones feedback!

I never had a dirty dish come out of it; provided you used the jet dry. No matter what I threw at it, they came out clean and spotless. The controls were on the top edge of the door so hidden during use and programmed before closing the door. The dishwasher ran whisper quiet and had multiple cleaning cycles; including pot scrubber. It should also be noted that the heater in this unit heats everything to the point of sterilization. You can actually smell the clean when the dishes come out.This dishwasher had the adjustable top rack so cleaning large items in the bottom was very easing. It also had extra large capacity so it took a lot of dishes to fill it. Stainless steel, and hidden controls were very nice. The large, rounded, stainless door handle was the only protrusion from under the counter so it blended well into the cabinetry. Kitchenaid 24-inch Stainless Steel with Proscrub. It came with the standard warranty and I paid to extend it an additional 2 years. It also came with a nicely written owners manual which was clear and concise on the operations.

My wife was having issues getting the upper rack on the Kitchenaid Model KDFE304SS0 dishwasher back into place. Problem was traced to the right hand upper rack trucks bearing retainer failing, releasing multiple bits of plastic and several small stainless bearings into the interior of the dishwasher. Closer inspection indicates that the manufacturer chose to use a nylon (PA6?) carrier which is degraded by moisture and heat eventually causing the carrier to break down. Why they chose that material when so much of the other components are POM which would have held up is beyond me. This will be a problem for others for sure if they use the heated dry. An additional worry is that not all bearings could not be recovered so there may be additional issues due to small metal bits traveling through the rest of the system. The unit was purchased from Sears July 17, 2015 so entirely too soon for such a failure. Clearly a poor choice in materials.

Only one issue with it. The ice tends to freeze up all the cubes together and I have to dump it all out. Otherwise, fridge is 10 yrs. old and havent had a problem.

Purchased our Double Oven July 29/11 from a local appliance shop (Herbs Appliances), authorized dealer for kitchen aid. From day one it did not work properly, convection fan made noise, in all fairness Herbs came back and fixed that. Then the electronics board failed. Had to turn breaker off and on, to reset it constantly. Well, now Herbs Appliances was not so eager to return and did not return at all. Excuse after excuse why he could not come. Then the upper oven failed totally. Called Kitchen Aid said it was no longer under warranty. Absolute nightmare from Retailer to manufacturer. To add insult to injury, we purchase a new cook top from Ikea. Nutid Induction cook top. It lasted 6 months, half the burners failed. To my surprise it was another kitchen aid product. To nobody else fault but my own, I have misplaced the receipt. No warranty. Big Box to supporting your local retailer, dont buy Kitchen Aid.

I am very happy with my stove. I have a gas stove and it also has a convection option. The heat seems true to temperature. The convection is a great option when you need to cook in less time. The only drawback is the knobs are not a solid piece and the wrap they put on it seems to be coming off. I use the stove a lot!

In December, 2013, I purchased a replacement dishwasher for my then 20 year old KitchenAid. Shortly after it was installed, we discovered that the handle was improperly attached and one end stuck out, catching on clothes and tearing them. KitchenAid informed me, That was just the way it was on some units. I found that unsatisfactory, so they sent a technician out who basically did nothing. I called the retailer, who replaced the unit completely with a new dishwasher within a couple of weeks.The new unit was installed in January, 2014. It came with a one year manufacturers warranty, and I purchased an extended warranty good through 2019. Since we are at our second home much of the time, and use this dishwasher twice weekly on average, we thought we would be safe with the new unit, which had a properly installed handle, by the way. No such luck. Shortly before Thanksgiving, 2015, while the unit was less than two years old, the top pull-out drawer fell down, landing on the dishes below. We removed the top drawer/pull out unit, and tried running it without the top drawer, but no luck.The unit would not operate without the top drawer. I called the warranty company, Bankers Insurance. They dont cover mechanical parts, I was told. So I called KitchenAid, and the wait was so long I was directed to their website, where I was instructed to enter my zip code to find a service technician. So I did, and the results? NO SERVICE in my area... impossible to believe, with over a million people in my greater metro area! Nonetheless, I contacted the retailer, who gave me the name of a service company. Their technician came out today, took one look, and said that the problem was a repetitive one, a defective part that KitchenAid was replacing with metal parts. No more plastic -- they had so many issues with this part that they were in most cases repairing the defective parts at no charge. That of course, was not my luck when I called KitchenAid. Nope, no replacement. We are not showing any problems with that model! Exact words.Not their problem! But they would be happy to direct my call to the parts department where I could order the parts, and pay for them, of course. I spent over a thousand dollars on this dishwasher, it gets light use, is less than two years old, and it wont run without a cheap plastic pull out part that will cost me well in excess of $200 to replace, because they only sell the entire mechanism. My biggest regret? I specified KitchenAid for my dishwasher in my second home. Trust me, they are not what they used to be, nor is their customer service department.

I bought a kitchenaid 3 years ago because I thought it was an elite appliance brand. Little did I know this would be the biggest nightmare. I have in the last 3 years have had the refrigerator replaced 2 times. The last was replaced in April and then has once again gone out on me. A refrigerator full of brand new COSTCO groceries completely spoiled. Over $300 of groceries and I was offered $75. To top off the inconvenience of having spoiled food with 3 children they can not fix it for another 5 days. So we are over a week now without a refrigerator and a trash full of groceries. Beyond frustrating!!! Only wishing we could just have our money returned to us or yet replace it with another refrigerator that is not the same or like the same model we have been given.

I will never buy another KitchenAid product!! Our 2-year old KitchenAid dishwasher model KUDS301XWH7 has a locked motor. I have never heard of a major appliance only lasting 2 years! Replacing the motor would cost $350.00.

I will never buy a KitchenAid appliance again. Our warranty just ran out and the fridge stopped working. We call certified repair and were told that the Tsunami had destroyed their plant and they no longer had the parts in order to repair the fridge. They told me they could rebuild the board but no guarantee would be given for the part and it would take anywhere from 2-3 months to rebuild. The fridge was 5 years and two months old. This is the worst customer service I have ever been given and the most rude responses by the executive offices. I will never - repeat never buy another appliance by KitchenAid or Whirlpool again. Buyer Beware!!!!

Purchased new Kitchenaid dishwasher in 12/12. Initially was pleased. Now seems to be slowly deteriorating - stainless steel streaks, using recommended products, water leaking from around front door handle, isnt cleaning as well as used to. Paid a lot for this machine based on input of sales people at Lowes. Never again.

I am Kosher and when I redid my kitchen put in 2 identical KitchenAid dishwashers... They both stopped functionally fully after only a year. The same issue, only a short wash. How ironic... You can not tell me that isnt an issue with the model. KitchenAid said not my Problem. Have to pay for a service call. They didnt even have technical support... for DYIs. I would never buy a KichenAid anything again.

The model I purchase in 2013 is no longer made. I paid about 1000.00 for it. The dishwasher detergent dispenser was faulty and the rinse agent leaked all the time. Eventually the dishwasher detergent cover melted. The unit was quiet. But after my numerous complaints and repairs paid by manufacturer they replaced the bad unit with a new one.

We bought all new KitchenAid stainless steel appliances for our kitchen. Stove had a broken door piece - ok fair enough, we are still waiting on the new part. Fridge specs were given without consideration for the hinges so when it arrived it did not fit - poor. New fridge arrived with door overfilled so that foam was puking out from all the edges. KitchenAid makes the fridges with a greyscale side and the stove with a black side so they dont even match. Called Kitchenaid - the service gentleman arrived and agreed door should be replaced but will take minimum 8 weeks as the doors are made in Mexico. 2/10 would not buy from this company again though I thought they were supposed to be about quality. KitchenAid now owned by Whirlpool, includes Maytag, Jenn-Air, Amana and Inglis.

Just purchased this dishwasher (KTA 44 dBA) mainly because it matched the refrigerator KRFF707ESS I wanted and am pleased with. However the top tier drawer of dishwasher is pretty much useless. I thought it was for stacking flatware but the prongs are so short, the flatware falls over. Wish I had bought a Miele which is more expensive but definitely superior. So now Im not using the upper tier for flatware. Alternative is this enormous basket which takes up so much space. No one would ever have need for that much basket space... takes up the whole depth of bottom drawer, which by the way, slide out on their own volition often. Dont stay closed unless you forcefully push it into place. Not thrilled with this dishwasher. It is quiet and it does clean. Thats it. Spend the money and get a Miele.

Our KitchenAid dishwasher W10321621D has to be located just below the busiest food prep/washing counter. After starting, it appears if theres the slightest bump against the washer, it will shut off - all lights go out. It wont even hold the point where it needs to resume. We have to put in more soap and restart the process. Sometimes we dont realize what has happened until the next day. A younger family member will open the dishwasher. Ill start unloading and then realize the contents are still not clean, figured out what happened, and then try to figure out what has to go back in! Very aggravating. It could have something to do with the exposed touchpad on the front, even though we have been so cognizant not to touch while running. We now have to put a chair in front of the dishwasher every time it runs to make sure no one goes within 2 feet of it. Hard to work around.

I have purchased KitchenAid stove the latest model and the top glass cracked within 6 Month of the purchase and I have called KitchenAid and they told me that they will not cover the cooktop. I am not sure what the warranty is for. We do have a lot issues with Kitchen product in the house. I would recommend that do not buy kitchenAid products as the products are expensive and issues with quality and reliability.

It takes longer to run a cycle and has lower pressure than my previous Inglis model. Items on the top shelf sometimes are not thoroughly cleaned. Saniclean and pro scrub need to be activated to get a thorough cleaning. Normal wash is not adequate. Deep tub, and it has 3 racks, so lots of room to place items. Wish the third rack had an impeller to clean items in it. Stainless steel front with controls on the top of the door hidden. Very nice packaging. Take extended warranty, run the cleaner through once every couple of months to get rid of the scum build up. Clean the internal filter every couple of months also. The Steam venting port damages your wooden cabinets next to the dishwasher. I had to put a plastic liner on the inside of the cabinet (facing the dishwasher) to stop the moisture from damaging the cabinet.

KitchenAid did not accept responsibility for object left in drain line at the factory. Ref. Model # KRFF507ESS01, Serial # K62811944. Constant freezing and leaking into bottom freezer. Finally KitchenAid repairman found orange object lodged in the drain line. Cost $190.95 and a year and a half of awful freezing problems. Do not buy KitchenAid Refrigerators.

Upon baking a heavenly apple pie for desert, (we live in the Okanagan Valley of BC) the well stuffed pie spilled over during baking. After the range cooled off, we set the self clean oven on. The next day, we proceeded to wipe the residue with a damp cloth and we noticed that the oven base was badly pitted. We reported this damage to the manufacturer (1-800-807-6777) and it went on deaf ears. Our range is only four months old. Burnt sugar will pit all porcelain surfaces, we were told. That is not so!! We have never experienced damage to our porcelain ovens from other manufacturers. Our VIP SUPERIOR PROTECTION PLAN also will not cover this situation. We would not recommend Kitchen Aid Ranges. We would appreciate a settlement.

A few days after my dishwasher was installed my contractor noticed that vent [left side facing dishwasher KUDS35FXSS] was wetting inside door of my new cabinet. I contacted Kitchen-Aid. They said I had to contact where I bought it. I called the appliance store & told salesman (Dominic) whats happening. He said hed look into it. After a few days I went to store & asked him what was going on. He said his K-A tech said its probably a bad intake vent. Dominic told me to call the number he gave me to get a serviceman out & just keep the door of my cabinet open when I use DW until tech comes and fixes it. I went home & contacted the service dept. Tech came out. Tech said he felt moist heat coming out from side vent by cabinet. Tech called K-A Tech who told him venting system must be bad for that vent is supposed to takes in air. Tech said he had to order a new vent system & he would be back to install it. Two days before tech came back I opened door of DW & a screw fell on the floor. When tech came to put in new vent system I asked him about screw & he didnt seem surprised. He said it probably came from the insulation. Is that normal? He put new vent system in & left. I put on the dishwasher & about an hour later opened my cabinet & felt the inside of it. It was wet. I called tech again. He came out for the third time. He contacted a Kitchen-Aid Tech who told him to do a diagnostic check. Result is he has to put in a new Control board and dispenser. Now the front light indicator doesnt work. The dishwasher was installed a month and a 1/2 ago and I can only use it with cabinet door open because it is warping my new cabinet and somethings wrong with the dispensers. When youre looking for a dishwasher nothing in the details tells you where vents are. Who would put the vents of a built in dishwasher on side when there is wood cabinets on each side.Now Im stuck with a dishwasher that when used is destroying my cabinet and doesnt take the jet-dry and I have no idea what cycle because light doesnt work. I didnt pay to have a dishwasher re-built I paid for a new working dishwasher. What upsets me also is the appliance store that I purchased it from acts like its not their problem, its the companys. H & H Appliance center is the one who sold it to me, not K-A. I bought a new dishwasher not one that has to be re-built. Please help I dont know what to do. I dont want others to go through something like this. I bought 3 other appliances from him ($4500.00 total) same day I bought dishwasher. I guess I was foolish to think hed make things right. I feel H & H Appliance Center, 909 Rt.130 North, East Windsor,NJ 08520 should hold some of the responsibility. Shouldnt you be able to go back to the person you bought from and expect them to make good? Please help me. This will never end until the warranty is up and they dont have to do anything.

We bought our KitchenAid dishwasher 11 months ago. Its one of their more expensive units, at $1300+. During those 11 months, weve had 10 repairmen visit. The appliance is now on its 3rd new controller unit, and its just failed again with the exact same fault - it locks up, with the front panel becoming non-responsive, and requires power cycling from the fuse box; and/or it aborts the wash part way through. Also, the plastic fittings on the racks have deteriorated, such that they have become brittle. On the top rack, and after only gentle use, the retainers for 3 out of 4 of the wheels have snapped, causing the rack to fall off its runners in all but the lightest of breezes.Ill also add that the customer service from KitchenAid is diabolical. The first repairman was openly rude and hostile, and also failed to show up for 3 appointments, costing me time off work. After insisting on a different repair company, it still took another 6 weeks to have the controller unit replaced. Weve fared a little better on subsequent incidents, but not much. Before this, I had a GE unit, which worked without a single fault for 13 years. I really regret not fixing the pump on that GE unit, because it would surely have been cheaper and infinitely more satisfactory than the junk from KitchenAid that Im stuck with now. So, my advice to anyone shopping for a dishwasher, avoid KitchenAid, Kenwood, Whirlpool like the plague.

The thermal fuse has blown out several times over the last two years, and is costing money each time. KitchenAid could care less - they are raking in the money as exclusive supplier of the parts. We have other Whirlpool and KitchenAid products, and the process is always the same. Theres no help from the company, no cheap parts, and theres aggravation at a simple machine that is designed to break down. Our Whirlpool dishwasher is designed with too small of a draincock, and it constantly blocks up. I am a repairman, and I am tired of coming home and fixing these ** things. I went over to Maytag and Sub-Zero, and have not regretted it. I now tell all of my customers and friends to not use these products as they will constantly be fixing them because they are designed to fail.