I echo what others have posted about Kitchenaids KFIS29 french door refrigerator - a total disappointment, buyers remorse, and Whirlpool must spend a lot of time and money making sure the people who answer the phone at their Customer experience Center are extremely polite while offering no solutions. From date of installation, Aug. 2013, the fridge never kept beverages and food in the upper unit cold, regardless of temp setting, the freezer simply could not keep items frozen, and the unit is loud. I chalked this off to the ill effects of being energy efficient. In the summer of 2014 I placed my first service call because the ice maker stopped making ice (never made much to begin with), the already high noise levels had increased, and the upper unit would not get below 43 degrees. When the repairman arrived, there was nothing I could tell him about the unit that he was not already very aware of. I was told I needed the kit and naturally the kit had to be ordered and I was told I had to call a special number at Whirlpool and order the kit. What an ordeal that was. In the mean time, the fridge started making a very loud sound like an impact hammer. Repairman can back out and found a huge amount of ice build up on the evaporator. The fan blades were hitting the ice causing the noise. Ice removed, problem solved, at least for a while. A few days later the the freezer was frosting up so another call to the repairman. The freezer door gasket was faulty and had to be corrected. Finally, the parts needed to fix the ice maker situation arrived. The kit was to correct the issue with low ice production, frost build up between ice maker and rear of the fridge, and to correct the problem with water dripping down and onto the evaporator coils and freezing. The control panel and a couple of other parts were also replaced. All good? Not exactly. The fridge still was not cooling, water was leaking from ice bin, and the noise level was still very high. Trying to get this thing fixed within warranty period, I call for service once again. The repairman and Whirlpool tech center ran tests and determined I needed a new evaporator and several other parts related to the cooling system. I called the Customer experience Center and requested a new unit. I was politely told that I had not had enough problems to warrant a replacement and that as long as the unit was + or - 5 degrees of the recommended temp settings (37 upper / 0 freezer) it was considered acceptable. Do not know about you but 43 or higher degree milk is not good and ice cream is suppose to melt after you take it out of the freezer. I was told by a Supervisor that since I had experienced some problems with the unit they would extend my factory warranty for six months. I was told if the parts on order did not correct the issues we could talk about a replacement then. OK, all the parts came in and were installed. Things appeared to be good for about two months except for the fact that around 37 degrees is as cold as the upper unit appears to be able to do, 34 would be my preference. In mid Oct 2014 I noticed low ice production, the noise level increasing, water dripping from the ice bin again, and there is frost building up again between the ice maker and back of the fridge again. I called the Customer experience Center to discuss replacement. I was told that since it had been more than 30 days since the repairs I would have to have a repairmen come out and and get on a call with tech support and diagnose the problem and oh, by the way, the unit is no longer under factory warranty. I advised that I had been told and assured that my factory warranty had been extended for 6 months. I was basically told that I was not told that and it would be impossible for that to occur. When I provided the name and date that I was told the warranty was extended I was told there was no one there by that name. It should be noted that only two people live in the house and thus it is not like the fridge is in a constant state of opening and closing and so on. To sum up, I have had to take off work 7 times for the fridge to be looked at and actual repairs to be made. I have absolutely no confidence that any further repairs will produce long lasting results. Looking at the dates of comments about the KFIS29, it appears no changes have been made to the fridge since people are reporting the same problems on units recently purchased as people who purchased them a year or more ago have experienced. If you are looking for a french door fridge you might want to not have this one on your short list.

Today I phoned for my 4th service call for this 2 year old KitchenAid dishwasher KUDS30FXSS. It simply doesnt clean the dishes, leaving a food residue on mainly the top rack of dishes. Each time, the serviceman has cleaned out the chopper and pump (beware: there is no removable filter for this model) and it cleans for a few weeks, then we start washing by hand until I can find a time to stay home for another service person to come out to do the same thing. Even though I purchased the 4 year extended warranty, KitchenAid has denied this 4th claim. I have been a loyal KitchenAid customer, and will be replacing this dishwasher with different brand. What a waste of money and resources.

Avoid at all costs the custom Architect series of KitchenAid 48inch built-in refrigerators. This $8,000 custom refrigerator has severe problems with the icemaker. I took delivery and installation of this refrigerator. From day one, the ice maker has not worked. It rains water into the freezer leaving ice all over the freezer. Two so-called KitchenAid repairmen came out the second and fourth day. They cant find the solution. After 10 days of no ice, they hope to replace some part that might fix the problem. The fact is that this unit has a design problem that may never be rectified. There is no reason a brand-new unit should have this problem and the service persons cannot fix it. This indicates either a KitchenAid ice maker design problem or incompetency on the part of repair/service providers.This kind of headache is unacceptable just to have ice cubes and cold milk! I should have gotten a cheaper fridge at one tenth the cost. If you research the reliability records of other built-in fridges, Sub-zero, Thermador, etc, they all have major issues with their ice makers and their compressors. I hope that Pacific Sales, now owned by Best Buy, can help rectify this nightmare. They want me to keep this defective fridge and give me an extended warranty to cover predictable malfunctions. Not a good way to start out. I could understand if this was a 10-year old unit but not with a brand new lemon!

We purchased in 2008 all of our kitchen in KitchenAid appliances. The biggest problem is with our microwave. We have replaced the grill cover twice. We replaced this product last in May of 2013. We also put in a new control panel because the panel would not work. That’s when I replaced the cover. Today is June 14, and they put my new panel in. When the technician handed me the grill cover, one of the clips had broken again. I called customer service, and they told me they could not help me because the warranty had expired. I told her this was the second grill I had purchased. They are $113 plus change, and I will have to buy another one.I told her I would like to talk to the President to tell how much trouble this product is, and that they need to fix it. I know $100 dollars to some people is nothing, but to me it’s a lot, especially if you purchase this all the time. My wife wanted KitchenAid because they were supposed to be the best. I dont have that feeling about their product. But you are right, customer service sucks! All I can say is that they better get their act together. It looks like they have no fan base.

The dishwasher has clean and simple design lines. Before this dishwasher I would have the TV volume up very high. I don’t have to do that anymore. I don’t have to pre treat my dishes or pre rinse. The clean dishes looks like I have done them by hand.

Kitchen Aid Fridge model KF1S29BBMS00 (French Door w/ lower drawer freezer) - We bought our fridge in late June of 2013. Its now Early September and weve been without a properly functioning appliance for more than 2 weeks. Looking through the reviews, the prospect is daunting of waiting months to get this resolved.Same issue as many. After a call to Kitchen Aid, a technician came to evaluate the issue and determined that it was an evaporator fan malfunction. It took 5 days to get the new part. A new technician/refrigeration expert came to install the new (and faulty) fan (The freezer door, which was functioning fine up to this point, was somehow damaged by him so that now it makes a noise when I open it). He said to give the fan 24 hours to cool the machine. A day later it was no better than it was before, with the temperature hovering around 60 degrees. A new technician was sent out the next day. He determined, after taking the refrigerator apart that the new evaporator fan was faulty. He defrosted the evaporator with a heat gun and talked to Rick at the KitchenAid tech line (On an aside, the drawer display doesnt work at all, a whole different issue). Now were waiting a week to get a new fan and no guarantee that this fan will work. We are very frustrated.

My parents bought this French door refrigerator Model # KRFC704FPS00 3 months ago (July 2017) from Sears in Cerritos. They paid a lot of money for this fridge. We called Sears first but because there’s no extended warranty, they don’t wanna schedule a service. Assistant Manager tried to help but that went down the drain. At first, it was making little to no ice then ice build up on the bottom drawer then few days after it was making this loud sound and not cooling anymore.I called, emailed, left messages through their website. No response. Posted on their FB wall. Responded so fast. Technicians scheduled, came and told my mom to go to Sears. Called Sears told me to contact Kitchenaid. Get the drift. Scheduled for repairs then days came near the technician reschedules. This is unscrupulous, delaying tactic that this company is doing. My mom’s health is at stake because she is taking insulin. Is there a way to help us just get a new refrigerator and get my parents money back? Please help.

I have a KitchenAid range. It is gas with electric oven. If you lean over it when cleaning you will turn on something. It goes off if you get to close to circuit board. If breaker is set off the whole panel where you set everything will shut down as if stove is broken. Sometimes after breaker is reset it still will shut down. After you do that three or four times it will come back on. I am always afraid the panel is out and that is a major cost. This is a problem somewhere in that control panel. Hopefully someone will find it since this is a 3500.00 range.

I have a KitchenAid double wall oven (this is a replacement due to an electronics problem) and after reading all the reviews about the control panel getting cooked when using the self-cleaning feature, I dont know whether I should use this feature or not. I paid for this feature when the salesperson assured me that this was one of the very best ovens available. What should I do? Cook the panel and ask for a replacement. Or ask for a new oven that does not have this problem when using the self-clean feature??? WHAT SHOULD I DO?? I cant believe KitchenAid would allow these ovens in the stores being aware of this terrible defect!!

We purchased what we considered to be a top of the line Kitchenaid wall oven 3 years ago. On Thanksgiving morning this year the oven display said meat probe thermometer error. I was not using the meat probe, and have never used the meat probe thermometer. I cannot get the message to clear and cannot use my oven. My oven purchased ONLY THREE years ago!!! Will never buy another Kitchenaid anything! We thought we did our research – this oven received good marks from Consumer Reports. In addition while reading the manual that came with the oven shortly after purchase, it warned against using the self-cleaning feature. What?? Kitchenaid includes a feature and Im sure we paid extra for it – that can cause the glass in oven to shatter. And then warns you in their own manual against using it! Do NOT Buy a Kitchenaid wall oven.

We bought our KUDS301XWH6 dishwasher in the spring of 2012, and we have had nothing but trouble. Two wheels on the top rack have broken off, and the control panel only works when it wants to. Even flipping the switch on the circuit breaker doesnt work most of the time. Like others, we bought this *more expensive* machine because we wanted to buy an American-made product, and because we grew up with KitchenAid dishwashers that lasted, problem-free, for decades. KitchenAid is coasting on the reputation earned many years ago, but their reputation will change as more people learn of their current line of shoddy, overpriced products. We will never buy a KitchenAid product again.

KitchenAid Model No. KDRP467K 36 Architect Series Dual-Fuel Range. The rotary control was set to bake at 350 degrees F. At 12:30PM, I placed oatmeal cookies on a cookie sheet (metal) into the oven preheated at 350 degrees F. At 12:37PM, the oven began to smoke. We checked the setting and temperature, attempting to open the oven door. It was locked and the oven was apparently in the clean mode although the controls were clearly not set to clean. I shut the power to the range off at the breaker panel. The range took two hours to cool. We have never used the self-cleaning feature.

I cleaned my double oven (upper) and now it does not work. When I try to turn it on it says that feature is not available. I am not sure what I should do or whom I should talk to. I bought it from Sears Outlet. I did not purchase any extended warranty. Can someone PLEASE HELP, this is a lot of money to just waste. This thing is not even one year old.

The freezer drawer was bent and leaking air during manufacture. Ice built-up inches thick, then moisture leaked onto the oak floor. Warranty service takes hours to reach and starts with them saying you must have done something wrong. You have to contract with a local repair shop and pay them in advance, but order parts through Whirlpool. It has dragged on call-after-call for months and is still not fixed.

Provided by contractor - 6 burner stove top, large oven. Gas range, electric oven - the preferred method of most cooks - at least the ones that are getting up there in age! Great size oven so when whole family gets together - over 20 and adding - it is big enough to accommodate all dishes - top with 6 burners is big enough to let 2 people cook comfortably - the more the merrier!

Kitchen Aid Gas Stoves seem to have issues with self-clean cycle. Shutting down cycle, blank display and door locked until thermal fuse is replaced. Kitchen Aid service representative who replaced control board (twice!) suggested not to use cleaning cycle. I thought that is what was a part of what I paid for when purchasing this expensive gas stove.

In 2009, we remodeled our kitchen and we went to Steeles Warehouse in Butte to look at appliances. We wanted a good quality and because we had heard good things about KitchenAid, that is what we looked at. After doing some research, we decided to purchase our entire kitchen appliances and to go with the KitchenAid. The first month we had our dual fuel convection range, the lights went out in the oven. We called the recommended service tech and he replaced them. A short time later (approx. three months) the lights once again burned out, and again we called the tech and he once again replaced them. At that time, the oven also was not working and he said it needed a new motherboard and replaced it. Now several months later once again, the stove is not working and once again the lights are out, again. We bought the recommended extended warranty only to find out you have outsourced it to a company that will not cover the stove under the warranty because it could have been a power surge? I will never purchase another product from the Whirlpool company. Because if you cant fix it, what is the sense in having it? We spent $3,300 for this stove and cant use it. What do you recommend?

I installed a new Kitchen Aid stove in May, 2010. The ovens preheat and self-cleaning features have not been working correctly since I first used the self-cleaning for the first time. I am 85 years old and gave up a perfectly good older GE stove because I could no longer reach the controls on the rear panel and bought this new Kitchen Aid because it has the controls conveniently on the front panel. It was a very bad decision. This is a very expensive junk. If you are considering buying a Kitchen Aid stove, dont do it. I am very unhappy with mine. I recommend you find a good used American-made made product and have it reconditioned by a qualified appliance repair person. I cannot afford this kind of ** product. Now, I do not have a stove that works and cannot afford to buy a new one. I would be happy to be involved in a law suit against Kitchen Aid.

Pretty much everything was covered, ad nauseam, in this blog. New house, new appliances - the repairman was here three times because our $7,000 SXS KitchenAid fridge/freezer (Model: Kss048FTX03) was not cooling. The repairman said the first time he was here that he installed the part that would solve the problem. Well, he will be back in 4-5 days with another part. It seems that the wall between the fridge and the freezer builds up ice that prevents cooling in the refrigerator. At least, that is what I am told. I was also told that he is very frequently called out to repair this issue.I mainly bought this product because we wanted to install custom door overlays to match our cabinets and a large unit. Not a lot is available in Hawaii and we were able to order this from Lowes. We are so sorry we did. Im glad that I purchased extended warranties on all appliances and am real glad that only two of them are KitchenAid! We, too, have lost all our food twice, not to mention the hassle of removing everything together with the thaw out and order process for parts. Should we have a class action here? We shall see. Im glad I found this site. My husband is a litigation lawyer with just such experience, so I may be back in touch with everyone when the next repair fails!

I bought my KitchenAid Dishwasher (Model KUDK03CTBL) on 9/5/09. Three months later, the memory board went bad and parts and labor were covered under warranty. Now less than two years later, the memory board is bad again. Unfortunately, KitchenAid will only cover the part, not the labor, which we all know is the most expensive part. When my repairman called for a replacement part, he was told it was a very popular item because apparently, the memory board needs replacement often. Warning: Do not buy this dishwasher.

I just bought a KitchenAid Architect Series dishwasher. Previously, I had a 26 year old free standing clunker. Guess what - the new dishwasher doesnt even clean out stains the way the old dishwasher did. Running it on heavy/hot water cycle - stains are still there, food is stuck in the bowl... Youve got to be kidding. This is just junk. My only positive comment is that it is quiet, which is important. However, it has almost no washing action and does not have good jets cleaning the dishes. Dont buy it.

Built a new home and moved in last year. Just pay the year mark our new KitchenAid refrigerator went out. We are now on week 5 and nobody knows when the parts will be in. We have been without a refrigerator for 5 weeks, KitchenAid and their diamond factory service could care less about how long we wait. Go with anyone else’s fridge, stay away unless you don’t need a refrigerator then go with KitchenAid. You won’t be disappointed.

Purchased Kitchen Aid dishwasher model KDTM404KPS from Home Depot in Nov2020. The 1st dishwasher had a problem day 1. It was extremely loud. Like a jet plane crashing. Metal grinding weird burning smell. I called Home Depot & told them it wasn’t working. I refused repair & demanded a replacement. I then had to spend 10hrs dealing with Home Depot & Whirlpool customer service before they would agree to replace the unit. The 2nd unit had to be returned because it arrived with massive damage to the door. Huge dent. The 3rd unit was finally installed in Dec2020. However, it still makes a lot of noise. Nowhere near their 44dba rating they claim. It’s the loudest dishwasher I have ever owned. Also, the dishes come out with a white haze. They come out dirtier than when you put them in. I’m going to call customer service again. This is the worst dishwasher I have ever owned.

Fridge purchased May 2015. Lid for cheese drawer kept falling off whenever opened and puddle kept forming on floor below bottom freezer. New cheese drawer lid ordered, still didnt fit properly so technician had to shim the sides and now there is a gap on either side where debris could collect and cant be cleaned out. Door on bottom freezer deemed to be warped causing it not to seal properly, thus huge frost accumulation on inside of freezer and bouts of thawing causes puddles on floor in front. Waited 2 months for a new freezer door, arrived and when technician went to install found it also was warped. Now have to wait another 2 months for a second try. Whole unit is substandard. I asked for a replacement fridge. Of course, they refuse but they are happy to keep making repairs. I am not happy to have to make myself available for repeated visits by technician for a problem that remains unfixed.

We have 2 KitchenAid dishwashers, supposed to be made by the same folks, with the top rack for silverware. This model is awful, would not recommend it at all. You have to raise the rack up every time you put something in the 2nd rack. If you lower the 2nd rack so it doesnt hit the 3rd then you cant put plates on the 3rd or lowest rack. What a mess. Had the appliance folks come out and they say there is nothing that can be done. This is an expensive dishwasher to have such a lousy system. We know KitchenAid knows how to get this done. Bad on us. Dont do the same....

Garbage refrigerators, stick to that mixer. $3200 junk. Had it for three years now and have spent thousands between fixing this worthless piece of garbage and throwing out spoiled food. KitchenAid just finds different ways of avoiding backing their product. I tell everyone when I get the opportunity to avoid Kitchenaid fridges. Mostly because they dont honor their warranty, which was in the neighborhood of $700 as well.

I like the features it has. And the color is fabulous. My husband and I love it. Space in freezer, fits our needs. Tell everyone what a great refrigerator it is, and recommend they get one too.

Bought at LOWE’S - KUDS30IXWHA model. Looking for recalls - this dishwasher is a huge disappointment. Odor, drainage, heat, water on the floor, soap dispenser not opening, rollers - I will never purchase nor recommend this brand. Very disappointing.

We bought this KitchenAid Range in December 2015. One year and 2 weeks later the oven stops working on Christmas Day. No longer on warranty. This is the worst appliance I have ever owned. It takes a long time to preheat and the bottom baking drawer doesnt seal well. I wrote an email to KitchenAid customer service and have not received a response. I hope this review prevents others from buying this expensive, undependable range. This is a real lemon.

Thinking Id go all out and buy my last and final refrigerator, I bought the fancy and expensive, and newest KitchenAid. Within four years I have spent over $600 on repairs (nothing covered by warranty). The first week of the Pandemic it again stopped working. I have thrown away over the last four years, THREE complete freezer contents with this refrigerator. The ice maker is positioned above the mother board, and drains onto it, and the repairman who finally came from the Factory said it was a major design flaw.This FIFTH repair was to cost nearly $1600 - and he said he didnt know if that would be all that was wrong. I have called and written my dealer and the parent company. I thankfully have an old KitchenAid in the back hallway, so have an inconvenient, but cold, refrigerator. Youd think when after only 4 years of wear by two people, and repairs requiring half the cost of the refrigerator, that KitchenAid would be more responsive to a long-time customer. I am so disgusted by this experience.

Has anyone else been annoyed by what I call a design flaw regarding ice falling behind the drawer? The ice maker drops ice on top of the trigger arm and when the tray is pulled out, ice gets dragged back onto the freezer floor and sometimes bounces out onto kitchen floor. Im dealing with a local business (who sold the fridge to me) regarding the issue. Ive sold hundreds of these and not gotten a complaint. Well, you are now. I have been asked to bring the bin in to see if it is warped or something. Yeesh.

For the last nine years I have replaced refrigerator parts every year. Most of the time it is the diffuser that needs to be replaced or ice maker will burn up and need replacement parts. I understand with the ice maker being used so much it will need parts every so often but every two years is a little outrageous. Beware. Many other refrigerators use these same parts and more than likely have the same problems.

We purchased our new KitchenAid oven in July 2010. We finally moved into our new home in May 2011. It is now early 2014 and the ovens blue enamel lining is peeling and chipping and the racks have rusted. I contacted Lowes where we purchased the appliance and the extended warranty. A repair man was sent. Upon looking at the oven, he called KitchenAid and told them that the oven was not only chipped in many areas, but that those areas were beginning to rust. KitchenAid would do nothing, stating it was a cosmetic problem. Same with the warranty company. After further research, I have discovered I am not the only one with this complaint. Do not buy their products, they do not stand behind them and will not return phone calls. KitchenAid is a rip off and my $2,700.00 KitchenAid mistake makes me sick.

We bought one of the newest KitchenAid ovens on the market about 4 months ago. On Thanksgiving it broke while I was cooking the turkey with 20 hungry people waiting. Mine too said feature not available. After a service call they had to order a whole new panel which is on back order. Its been 3 weeks with no oven and I dont expect the part will be in for Christmas.

We purchased KitchenAid Model# KMHC319ESS-3 and after 2 years since the purchase it was necessary to replace the magnetron, a major part of a microwave. It cost us more than half the price of the microwave for this replacement. A major part of the workings of the appliance shouldnt break after 2 years. Will not buy a KitchenAid product again.

Purchased over stove microwave 3-4yrs ago. KHMC1857BSSO. The microwave was rarely used and there is a crack in the plastic seal around the door, KitchenAid refused to fix it even though I have warranty. Now the door wobbles and gets jammed. Still under warranty, called customer service and they will not fix - calling it cosmetic. Do NOT purchase their extended warranty, its a ripoff. Extremely dissatisfied with KitchenAid and their customer service.

Kitchen Aid range KESK901SSS08 - The cooling fan which runs when the oven is turned on is EXTREMELY loud and has a loud whistling sound which resonates throughout our entire home. Kitchen Aid has said there is nothing wrong with the fan motor and therefore will not honor a return or replacement of this unit. This unit was delivered August 5, 2014 and was not in use until a few weeks later when the oven was first used. We are STUCK with an expensive range which we cannot use!

We purchased our KitchenAid Microhood KHMS2050SBT in Dec. of 2007. It was installed Jan. of 2008. Until recently, we have enjoyed using this unit. However, two weeks ago, we set the timer (no heat setting) for 40 minutes and in about 25 minutes, I noticed a burning smell. We know the microwave itself was not on. I followed the smell and it was clearly coming from the microwave and getting more smelly by the minute. I did not check the controls read-out, I just quickly opened the door to see what was going on. The interior was full of smoke and the center of the glass tray had turned black. Once the smoke/heat cleared, we found that the center of the glass tray was in fractures, practically a hole. The plastic trivet below had melted onto the bottom of the interior. We want to know why the microwave started up when only the timer was set. I see no other similar complaints about this model and we are just beginning to work it through with an NSI Protection Plus service vendor. It seems to clearly be some sort of malfunction. Initially, the vendor is saying the interior overheated so its not a warranty covered issue. I hope we dont encounter the same stonewalling from KitchenAid as others have for another microwave model. We paid dearly for a brand we assumed was the highest quality, maybe not. Until this is resolved, we have no microwave - bummer!

Our 7 year old KitchenAid Kss42QMSO1 side by side started chirping, the internal control panel lights were flashing and we could not adjust or control the temperature using the buttons. I first called the Kitchen Aid HELP LINE (that is an oxymoron). Talking to the fridge would have been just as helpful and all they were interested in doing was dispatching a service man, when he showed up we were advised that it was the control board # W 10219463 that had failed. When I asked the cost to replace it he advised that it was no longer available because the factory in Japan had been destroyed by the Tsunami. This was two years ago, and this huge company had done nothing to create a new supply?? Can you imagine Toyota or Sony using that excuse? Our only option was to send the control board to Chicago for repair and have the fridge / freezer out of commission for 3 to 4 weeks, also we had to sign some kind of a liability waiver. I thanked the service man and advised I would get back to him, then I started to surf the net and after some time I came across this web site and thankfully the blog from Chris in North Van. I live in White Rock and if I knew your address I would drop off a very good bottle of wine on my way to Whistler. Thank you, after reading your info I asked the service man to come back and remove the board. However he said he was prevented by Whirlpool / Kitchen Aid from doing this unless it was sent to Chicago. I contacted another excellent service man who is independent and had him do the removal. I would say unless you are very mechanical you would be better to go this route. He also advised that it was often the evaporator fan that caused the circuit board malfunction. Once it was removed I found it to be exactly as per the photo from Chris. I was able to locate the capacitor from SMI Industrial Electronics in the nearby suburb of Langley, it is a 22ouf 10X12 HI TEMP CAPACITOR 85 o and cost the princely sum of 36 cents (I even purchased a spare). I then took this to an electronics repair man who tested and removed the defective capacitor and installed the new one in less than 5 minutes, he would not even accept any payment. I would advise that unless you are used to working on circuit boards and have a very fine tipped soldering iron I would use an expert, even if he charges you. It would be easy to short out the wires with too much solder. I took this home and the service man came back and installed the circuit board and a new evaporator fan which for some reason is a stock item and in about 1/2 hour the fridge was humming, no chirping and we were able to set the freezer for 0 F and the fridge for 37 F. The temperatures both initially read the 70 F air temp. but started to fall quickly and a few hours later we heard the first ice being made and everything is working just fine. Our total bill including the fan was $260.00. Thanks again Chris, and like you I am amazed that the so-called help line would not advise of this. I am fairly certain our first service man knew of this option because when I told him about the info from Chris he was not the least bit surprised. He probably would be blacklisted if he went against the companys policies. Good Luck!

We are having the same problems as others with the Kitchenaid Microwave Hood Combo (KIHMS155LSS3). We own two units (one at lake cabin & one at home). The cabin one was running when I returned after being gone for 6 days & the only way to shut off was to unplug it. It was not used or plugged in for three days. Then last night at 1:20 am I woke up to it beeping and the control panel read 5:42 & it would not cancel so I had to unplug it. When I heard about this a year ago I started unplugging my cabin microwave whenever we were gone. Im frustrated & will be contacting Kitchenaid even though others have said it will do no good.

Ok, so for the 2nd time in less than 3 years, the wheel clips on the top wash basket broke, which in turn makes the basket fall down and the washer inoperable. For the price I paid for this dishwasher I will tell you that I was a little more than miffed. The last time it happened, I called my home insurance company out because I did not have the time to deal with the washer (that cost me $70). This time I went online to see about ordering parts. I found this site (and after reading through numerous comments) I have to say that I am extremely disappointed in KitchenAid, especially when I see so many people experiencing the same problem as me. This is obviously a design flaw that needs fixing. So, why did I give them a rating of three? Because upon calling the company to lodge a complaint, I talked with a VERY nice, young lady who worked with me to figure out exactly which part I needed. No stalling, no dodging, she took care of business, put my parts on order and all with no charge to me. Her professionalism is the reason why I gave this a 3 star rating. I have found from experience that when a company has a problem with a product, if you call them (and stay courteous) 9 out of 10 times they will do what it takes to make it right. The lady I talked to was named ** and I am hoping that her supervisor sees this email. Again, thank you ** for your help and professionalism. Semper Fidelis.Updated on June 13, 2015: To be fair to KitchenAid, I am following up from a post I made on June 6th. My parts for the top rack wheel assembly arrived and I just finished installing them. I am happy to see that they have modified the wheel assembly actually using a metal plate this time and it looks like more solid connections for the wheels. I will give them a four star for now as I wait to see how well this modification holds up. Thank you KitchenAid for getting the parts to me in a timely manner. Semper Fi **.

I remodeled my kitchen, and purchased the Kitchen Aid Duel Fuel Range in March 2014. I used the oven for the first time to bake chicken on June 9, 2014, and the INSIDE GLASS TO OVEN DOOR SHATTERED!!! I called KitchenAid, they will pay to replace oven glass with same type of glass. Does this make sense?! I questioned it, and they said to speak to the repair company.

We built a home and bought all appliances new. The flat top stove is KitchenAid and we bought all in May 2016. Moved in Oct 2016 and used the stove several times to find out even with the stove cleaner it was not a good stove. You can see the eyes that we use they have like white built-in marks on top and I text the Co. - no answers back. No response.This cook top is bad.

I have owned the KitchenAid Pro Scrub for two years. I purchased on the previous reputation of KitchenAid, and what a complete disappointment. What I was told about the dishwasher was, it is quiet, heats water to ultimate sanitation, no need to rinse, with garbage disposal, high powered, is an excellent option... the dishes have not gotten cleaned even pre-rinsing from day 1. Called the company I purchased the dishwasher from and the claim is I was not using the correct chemicals to clean the dishes. Really? I was told the dishwasher was the top product for cleaning the dishes... not chemicals. The dishwasher was somewhat quiet at the beginning but progressively became noisy, cleans off and on, and now, water does not make it up to the top basket. Followed the troubleshooting recommendations to check for blockages, although I always pre-rinse. No blockage; however, no water is getting to the top basket. Even tried dropping the basket to the lower setting and no luck. The top basket drops down and forward. The plastic pieces to the top sprayer in the back of the dishwasher does not line up properly, the plastic piece on the back is possibly warped. This is a very bad product.

In 2013 I purchased a KitchenAid package of appliances for my house. Since last year I have had the repair people out on 5 different occasions and I am still having issues. The model number is KFIS29PBMS02. Initially I was having issues with the ice maker and freezer and the PO code which means powers failure. I was told to have an electrician check the outlet which I did and it was fine. They then said it was a circuit board but didn’t know which one and they recommend replacing both which we did. No sooner did they leave and the code popped up again. They said it must have been a bad board and replaced another board. After they left it acted up again. Tech came out and said it was a bad deli board which is the last thing the company wants to replace due to the cost. I told them ice machine is still not working right. He said I may need a new machine. I couldn’t afford one at this point after taking numerous days off from work to meet the repairman. Fridge had also frozen up and the guy defrosted with his heat gun and said KitchenAid knows that the condensers are bad because they are aluminum and they have been replacing them. Fridge froze up again, ice maker makes ice randomly say a tray a week if lucky. I put bought ice in the dispenser and it melts. They are coming to replace the condenser this week after making arrangements for someone to stay at my house to wait for the repairman.Talked to different repairman today before he came and told him the problem and he said it may not be the condenser which is under warranty still (5 years). Frustrated as hell and think there is class action status here. Customer service at Kitchenaid sucks. They do not care and basically told me I didn’t put enough money out to qualify as a lemon.

My KitchenAid microwave will run on its own without touching the keypad and will show a code of F2 or PAN. The model number is khms155lss-4 and the serial number is trs5270229. This condition is a fire hazard and should be recalled. I am making a request at this time that this unit be repaired or replaced free of charge as soon as possible. Thank you.

Do NOT purchase Kitchenaid dishwasher model KDPE234GPS0. I purchased one on 21 APR 2018, model did not work, all it could do was fill with water and sit there for about 5 minutes and then drain. I removed the unit and exchanged it at a different store across town for the same model. I installed the new unit this morning of 24 APR 2018 and it appears to have the same problem. The unit will not agitate or spray water, whatever the term is. Ive recorded a video with my phone inside the dishwasher. All it does is fill, sit around for a bit, and then drain. I will more than likely be returning this for different model, if not a different brand entirely. I dont place any fault on Lowes for this failure, except for maybe selling this product to begin with. Theyve been more than helpful with my problems and I will continue doing business with Lowes.

Our KitchenAid Wine Cooler is in its sixth year and stopped cooling this week. With most refrigeration this age you automatically assume it is just a premature leak of the Freon/coolant which is bad enough. However, the repairman (his trip cost $85 for the bad news) reported it was the evaporator that failed and the parts are already out of production/not available and therefore, the unit will have to be replaced. Whirlpool which owns KitchenAid confirmed the part is not available and that there was nothing they could do for us. Since we would have to replace it with another KitchenAid unit for reasons of fit and appearance, one would think they might do something monetarily for the consumer. Ironically last evening at a New Year Eves party we heard a very similar story involving a failed KitchenAid refrigerator that was only in its third warranty year. KitchenAid/Whirlpool should not be getting away with this fraud-- no consumer expects to junk a relatively new appliance because it breaks. When the class action lawsuit happens, Whirlpool will wish they had done right by their customers.

On Monday, January 23rd, 2012, KitchenAid double oven (model number KEBS277SSS04) exploded during its self-clean mode while my 5-year old and I were in the kitchen, showering us with scalding hot glass. Do you know what temperature the glass is when it shoots out of the oven? I called the extended warranty company who tried to deny the claim to fix it. I spent over an hour on the phone just to secure a service appointment. Then I look online and discover that many people are having the same issue with ovens that were purchased about the same time as mine. Consequently, after the oven is repaired it still does not function properly. That is a concern for the safety of my home and my children.Then I contact customer service at KitchenAid. Their response is that they are sorry but Ill have to deal with the extended warranty company. They documented my story and that was it. Clearly there have been other complaints. The lack of response makes the company negligent. Further, they are endangering me, my family and my home if this product that operates at dangerously high temperatures fails or malfunctions again. If KitchenAid as a company are willing to settle with not answering these continued complaints, then you are guilty of being irresponsible with consumer safety.

I recently bought a KitchenAid oven (KGRS206XBL2). In the first 4 weeks, all the markings on the burner knobs were wiped off. I called KitchenAid who responded the warranty does not cover the knobs. After much discussion, their response was basically we dont care. Poor products and terrible customer service.

I had an upscale kitchen remodel done and spent probably $75,000 on appliances. I purchased two KitchenAid fridges and microwaves and an under counter ice maker. To date the microwave has almost no power. I have a $35 microwave from Walmart that heats food three times as fast as my KitchenAid. I had service out in the first month because the microwave sounded like a jet engine. They replaced a fan in there and then I had it out again because it just wasn’t powerful enough and they said there was nothing they could do. The cost of the microwave was $2500. One of the fridges randomly will just make this worrying waze. Who knows why. I don’t even want to call service man for that. And the ice maker has given us problems from the first six months. And now the ice maker has died. I would periodically have to unplug it and leave it for a day and plug it in and it would work but now nothing. I think that thing cost $2700. We did not buy these appliances at Lowe’s but at an upscale appliance store where they guaranteed me that it is a better quality than if you purchased a KitchenAid on the floor of a big box store. I would never purchase a KitchenAid appliances again. I also have Wolf Appliance as a double wall oven and a large commercial stove. The double oven timer you can’t hear it and less you have your ear up against it. I had a service man out and he said there’s nothing you can do about that. The commercial stove one of the front electrical ignition switches doesn’t work that up and cost 50,000. It is insanity that these companies are in business. So poor quality and they don’t seem to care. I don’t even know if it’s worth it to have a service man come out and check my ice maker.

Great looking 30 inch range with double oven and four burners and center hot plate. Bottom oven a little too low, tough bending over to pull up a 22 lb. turkey. Other than that its a beautiful thing.

Our $600 KitchenAid microwave failed after less than 2 years. I spoke with customer service about repair, and was told that replacement parts are not made for this item as its a countertop appliance. Was not marketed as such - was sold to me as an installed piece with a matching trim kit. I was told that I would just need to purchase another microwave given that Im out of warranty. Very disappointing to discover that a seldom-used microwave that retails for that much money cannot be counted upon to last for 2 years. Sadder still that KitchenAid is not willing to stand behind their product by at least offering a discount toward the purchase of a replacement product. Based upon this experience, I will not purchase another KitchenAid appliance.

We purchased a Kitchenaid dishwasher about 3 years ago. KUDS35FXSSO. This dishwasher had the wheels on the top rack fall apart within the first 2 years. Then just days ago, the main controller just stopped working. It looked like the controls were not getting power. So we called Whirlpool and they sent out a local company to see what was wrong. I had to pay $100 for them to tell me that the controller is known to go out and be defective. Also the internal control box was hanging by the wires, also known issue and has caused fires. I also found out the valve was not working so the top sprayers were not getting water so they were not cleaning the top dishes.The parts for these items are covered from years 2-5, but not labor. Total labor cost for all of this plus the previously mentioned cost is around $300. That is not to mention that a heating error was also found (another known issue) but not covered by the warranty. My question is if all of these are known issues, and have occurred to many people, why are these dishwashers not recalled? Or why hasnt there been a class action lawsuit! I will not have them fix this piece of garbage, just so I can pay again down the road to replace or have it fixed again.

We have a stainless steel KitchenAid dishwasher. Its around 3 years old. Model is KUDK03FTSS0. It does a decent job cleaning the dishes, but Ive had to dismantle the filter mechanism to clean it out twice now, no big deal, but I did have to buy a special Torx screwdriver. The main problem, however, is the placement of the steam vent. Its located at the top of the door, which happens to be right under the countertop. Over time, the steam venting from the dishwasher has caused my counter (melamine) to swell and bulge and now its impeding the door from opening. What a stupid idea to place the steam vent right under the countertop! Well, its probably not an issue if youve got granite counters. I guess thats next on the list of household updates.

In mid February I wrote a complaint about all the problems I had with my # kfis29 French door fridge. I contacted whirlpool who makes the unit and told them that when I call kitchen aid they wouldn`t do nothing for me! After a week the place that sold the unit to me who had nothing to do with the problem also called whirlpool and told them the story. Guess what? He told me to come in and pick out a new fridge of equal value and that whirlpool corp. was giving me a full refund. So the store rep, told me that he had very little problems with GE and that if he did GE backed him 100% so I bought a GE French door, super quiet and they also threw in a 5-year extended warranty! PS DON`T GIVE UP! KEEP CALLING UNTIL THEY SATISFY YOU. WE PAID A LOT OF MONEY FOR THESE AND JUST WANT WHAT WE PAY FOR! THE STORE I USED WAS RICHMOND APPLIANCE, STATEN ISLAND NEW YORK! THEY’RE THE BEST FAMILY BUSINESS around.

I had a KitchenAid dishwasher for 20 years and finally, I decided to replace it only because it was not dispensing the soap completely. I wish I had my old one back. The new model (KUDC10FXWH) I purchased in May 2011 and cost $940 including installation, warranty and tax is a big disappointment. So far, the repairman has been out 3 times. The last diagnosis was a control panel malfunction, which causes the dishwasher to shut itself off. It is almost useless to me because I have to run a cycle twice and/or a separate rinse to be sure the dishes are clean. Mostly, I have reverted to washing dishes by hand to save water and frustration. So far, I have not had to pay anything out of pocket due to the regular warranty. But thank goodness I got the extended warranty because I think I will need it. Buyer beware!

Kitchenaid Dishwasher KUDS301XBL7 - The plastic rollers on the top and bottom are cheap and break a couple of years. We have replaced 3 out of 4 roller assemblies and anticipate the 4th to go soon. Also, the controls on the front are very touchy. If you lean against the counter and accidentally touch the dishwasher/control board, it will turn on or start cycling. This forces you to lock the panel, but that is not convenient. Dishwasher works well and have no problems with it.

We purchased a $1000 KitchenAid Dishwasher 2 years ago. From a local co. Info arrived about extended warranty for $109. This is not our first rodeo with appliances. We have had them since our first house in 1976. Four homes later in Fargo, ND we downsized. We have always upgraded appliances over the years. Not because they failed... we just wanted new ones at the time. This condo is brand new, built in 2013. This has been a nightmare. 45 days later and its still broken. 2 service calls from the assigned warranty repair service dealer, and Im still washing my dishes. Im 64 yo and this is a pain! Kids: if its an old appliance, keep it running with repairs. Dont buy new!

We used the Aqualift feature for the first time this weekend on our Kitchenaid oven. The oven really wasnt that dirty, but we wanted to get the glass door cleaner. The Aqualift process did nothing to clean the oven door. No matter how many times we ran the process. We ended up using a half of box of Brillo pads to get the oven door glass clean. This is not what we expected for the price of the range we paid from a kitchen specialty appliance dealer. This experience was unbelievable. The inside of the oven wasnt that much cleaner either. But the 2 cups of water were still sitting on the bottom of the oven like the manual stated. Note: We did not use the Brillo pads on the oven cavity as we did not want to scratch the finish. We have used the pads on other glass items without scratching the glass; therefore did the oven glass door only. It took about 2 hours of manual labor to get the glass cleaned. This will be the last Kitchenaid product we purchase as a result.

We purchased the KA model KFIS29BBMS02 in December 2013. We noticed it was rather noisy but we were told that refrigerators make some noise. We have already had technicians out 4 times. They have replaced the evaporator fan motor on July 25 for a flapping noise. That noise is still present. We have a high pitched whirring noise that happens a few times each day. We have found out the mostly constant humming noise is the compressor, as it is always running. We have been told at todays appointment that the compressor needs to be replaced since it is apparently leaking Freon and will hopefully keep working until the repairman can get the part - which is on back order because so many have needed to be replaced!!!! We have also had to replace the touch pad control panel as it popped out of the front of the fridge! After 9 months, we are still unsatisfied with the refrigerator and the KitchenAid brand. So disappointed.

Purchased VERY EXPENSIVE (built in) side by side refrigerator in 2011. Started having ice maker issues within the year. At this point /050316 repairmen have come at least six (6) times- even replaced icemaker. Repairman said these door models have ALWAYS had problems & should be taken off market. Really makes me angry that I wasnt told about this since my built in is SO MUCH MORE than regular cost of refrigerator! Im about to call for repair AGAIN today! I should have been given a different refrigerator from the beginning and also been paid for new cabinet fronts for different style refrigerator! I try to warn everybody I know about this to prevent someone else being taken as I was! Would NEVER buy another KitchenAid!

We purchased all new KitchenAid appliances after we moved 4 years ago. We have had nothing but problems with our microwave, from the control panel (two times), to the thing turning itself on and heating up. The last time I talked to a service manager, she refused to pay for the labor, so I called her back three times and told her to mail us the part since it was free and she never called us back.Finally they sent the part. They always say the part is covered under warranty but we have to pay for the $150 labor charge. One time they paid for the guy to come and tell us what was wrong but wouldnt pay for him to come back and put the warranty item in!? Our oven latch constantly gets stuck and I have to keep hitting self clean on and off until the stupid thing can unlock itself. Now the latch keeps the door from closing all the way and then the oven will not heat up properly.The one customer service girl asked me if we unplugged the oven and I said no then she proceeded to tell me I had to pay $150 for the service guy to come and look at it. When I asked her why she wanted to know if I had unplugged the oven, she told me, “Well, that resets the computer”. Why wouldnt you tell me to try that first?! Because that worked! Their customer service department is useless!

2 years old dishwasher. Within 6 months, top rack roller axles broke. After a year, stopped cleaning top rack items. I found out the Chopper Assembly was broken. Had to replace it. Both are cheap plastic parts. Terrible experience with this brand.

Bought this new Kitchenaid fridge in October. Had the service tech come out because the drawer did not work well. Said they would order new parts. Now three months later we are still waiting. NOt pleased. Bought this to replace our sixteen-year-old Kitchenaid fridge which worked fine but they said some parts were no longer available. Should have kept my old one.

I have purchased a KitchenAid oven. Never again. It takes over 12 minutes to heat up. All the while it is running, it is loud. The burners take forever to get hot also. I have also purchased a refrigerator. The ice maker is awful...Its too small and doesnt make ice fast enough. The other product from KitchenAid I purchased is a front load washer and dryer. The washer needs to be cleaned all the time. I was not told that. The dryers lint catcher, for a large capacity dryer, is so small, its ridiculous. None of these things were mentioned to me. I would have never purchased these appliance if I knew! Very upset buyer.

Purchased a Kitchen Aid side-by-side refrigerator as part of a new home purchase. Everything was fine for the first year but then the lights in the refrigerator and freezer began going out. I called Kitchen Aid and they scheduled a service repair. Two lights were replaced (at no cost to me) and about 3 months later, the same issue came up again; no lights. Again I called Kitchen Aid and they sent out the same service repair company and they again replaced two lights (at no cost to me). Now, 4 months have passed and the lights are out again in both the refrigerator and freezer.I called Kitchen Aid a third time and they said the refrigerator was out of warranty and I was on my own even though they didnt fix the problem when it was under warranty. I believe the LED light panel needs to be replaced costing several hundred dollars. Kitchen Aid quality is average at best and I would recommend not purchasing their product. My refrigerator retails for about $10,000, model KBSD608ESS, so I would expect much better quality.

The glass window on my two-week-old KitchenAid Superba double oven with convection exploded last night during the cleaning cycle. Glass flew out all over the floor, clogged the vents of the oven, and terrified me. Thankfully, I was home and able to turn off the unit before anything else happened. Now, I am afraid to replace this with another KitchenAid, especially after seeing these other instances of glass doors shattering.

I wrote a letter to the Jeffrey Fettig, Chairman and Chief Executive Officer of Whirlpool and Marc Bitzer, President of Whirlpool North America regarding a part they no longer made for my 5 yr. old KitchenAid refrigerator. Because of problems I was having with the refrigerator lights and the ice maker not working a repairman told me I needed to replace the electronic control board but that KitchenAid no longer made the part. I called KitchenAid customer service and was told I had to send the control board to Illinois for repair which meant my refrigerator would not be operating for a week or more.After spending hours online I found that Sears Parts Direct had a replacement control Board for my KitchenAid model which I ordered. By some miracle I was able to get the lights working by making an adjustment on the door hinges and the ice maker suddenly started to work. I returned the control board I received from Sears. What is interesting to me is the fact that I never received any response to my letter to Whirlpool senior management. In the letter I asked them 3 questions:When and why did they make the decision to stop producing an integral component for a KitchenAid product causing major inconvenience and problems for consumers? Why does KitchenAid Parts online show this component as available when it is no longer made? Why would a Whirlpool control board be defective in a 5 year old product? (As stated above my control board was not the problem after all.) I also told them I had noted the number of KitchenAid product complaints on Consumeraffairs.com. The fact that I never received any kind of follow up shows Whirlpools total lack of integrity and concern for their customers. The JOKE is Whirlpools Vision and Mission statements..... Pride, passion and performance.... Creating Loyal Customers for Life. We are a company of people captivated with creating loyal customers. Unfortunately the joke is on their customers.

I purchased a KitchenAid 30-inch gas cooktop. The knobs overheat while cooking and require the use of an oven mitt to turn off. Goldstar and KitchenAid are aware of this design defect with knobs overheating. Goldstar and KitchenAid refuse to do anything about this matter. In the meantime, were stuck with a KitchenAid gas cooktop that is dangerous to use and could potentially cause serious burns while using the knobs. Run, don’t walk way from Goldstar and the purchase of any KitchenAid appliance. Their negligence and refusal to address a problem regarding possible injury is reprehensible. We advise anyone considering Goldstar or KitchenAid to choose another dealer and appliance manufacturer. Dont buy from any company that does not stand behind their product.

This is the second review I am writing about this oven. The first review I wrote was a couple weeks after it was installed and I gave it 5 stars. Its a beautiful oven. The stovetop/burners work great. The top oven is the one I use the most and at first it was fine, but after about a month, I noticed the blue interior is peeling off the base plate on the top oven and black splotches started appearing. I removed the base plate and tried to clean it but there wasnt anything on it. The blue was just disappearing in places. I took the oven plate back to the store I bought it at and they ordered a new one.The second plate started doing the same thing after only a couple of weeks. The blue coating is clearly not perfected and I really wonder if it is releasing chemicals or flaking off into the food. I cannot recommend this to anyone. KitchenAid - you need to do more testing before you release products into the market. I am a product developer - I know when something hasnt been tested appropriately. Im waiting for my third base plate to arrive but I am likely going back to the store to tell them to replace the oven. My preference would be to replace it with a different brand, but the over the oven microwave that a purchased at the same time is also KitchenAid brand (ut-oh).

I have an older model and its still going strong. They dont built things anymore like they used to. Its very roomy, keeps things very cold, plenty of compartment space including the door. The freezer works excellent and so does my ice maker.

I brought a KitchenAid Dishwasher and a KitchenAid Refrigerator and both are THE WORST purchase I’ve ever made!! I’ve had problems within 30 days of my purchase. The dishwasher does not drain properly, parts were falling off, the top rack sprout continuously broke till the point of not being to use it anymore. My fridge kept building ice in the back of it, all the lights inside repeatedly die out, the ice maker makes ice intermittently. I could go on and on!! Please buyer beware! Buying KitchenAid is a complete waste of money!!

While building a new home we selected KitchenAid for several of the appliances. The freezer in this refrigerator failed after less than 2 years. The factory approved service company was called and on the first visit they determined it to be a evaporator fan. Of course they did not have the part. So it was replaced on visit number 2. It failed again after about 1 month and visit number 3 was scheduled. This time it was determined to be a controller board. Again, the tech did not have the part so visit number 4 is scheduled. So far it has cost me almost $600 and 4 days of waiting for the tech to show up. Not good for a $3,000 + appliance.

New refrigerator purchased on 5.22.2017. Barely 2 months old, but has been missing parts from day 1. A totally defective product not cooling, leaking water on new flooring, can’t get help from Sears or Kitchenaid. Battle weary over this whole process... Will never buy another appliance from Sears or Kitchenaid. 4 ** service calls from diff companies, no one can fix, cannot get it exchanged and keep getting bounced back to different departments! Beyond frustrated, so discouraged about ever buying from companies that I thought were reputable. BUYER BEWARE!!!!!! Model # K71800939. I cannot begin to describe the stress this has caused! What happened to standing behind your product? I have literally spent hours on the phone dealing with this problem! I have gone back to Sears, no one wants to take care of this lemon!! ****** BUYER BEWARE **********

I am deeply dissatisfied with KitchenAids customer service, in particular with their Whirlpool Factory Certified Care. In June of 2011, I called KitchenAid customer service about a broken spring for my microwave oven door. They recommended a local certified KichenAid appliance repair shop. I spent $411.67 on replacing one broken spring. Just eight months later in 4/2012, the spring broke again and cracked the glass on the door in the process. This time, the KitchenAid customer care recommended their new company, Factory Certified Care. I was unhappy about the spring breaking again so soon from the previous repair. And I was guaranteed that their own KitchenAid technicians, who only deal with KitchenAid products, provide a stellar repair service.However, the repair took two long days, and the technicians used graphs, sketches to figure out how parts go together, without seeming to be the experts they promised to be. Nevertheless, after the replacement of many parts, I paid another $463.63. Only 53 days later, two screws came falling out, unhinging the door. What kind of poorly made parts, workmanship and quality of service renders screws falling out some short weeks after a service call? I called their customer service immediately relating this problem and found their representatives completely frustrating and unhelpful. I asked to speak to the supervisor twice, and they were equally unpleasant. They knew only to recite their 30-day labor guarantee policy. Even if the part (screws/ brackets that was replaced) was under warranty, I am looking at spending at least another $100 just to have someone put back two screws. Furthermore, given my experience, what faith do I have that the screws they put back or other parts that they replaced/assembled recently wont be falling apart again just outside of the 30 days, rendering me to pay another sum for service call? I asked the supervisor why anyone in my situation would ever use their service again or purchase their products. They did not seem to care one way or another. There is absolutely no business that will thrive or sustain without reliability and a positive reputation. I spent two frustrating hours speaking with their customer service representatives to find myself at a dead end. I wrote to their customer service department to share this excruciating experience and never received a reply.

When my microwave was serviced by Prather Services, in Lexington,KY, it was discovered by the technician, that there were cigarette ashes inside the top of the microwave. Also, there was a nut driver found inside the microwave (I have photos). The microwave was operating well, except the door needed new springs. Prather Services took my microwave back to their shop for several months, then returned it, and it did not work at all. They indicated that it worked great in the shop, but now it didnt. They then have tried to make me pay for it. I ask about the unsanitary health issue with ashes in my microwave, and they said they contacted Kitchen Aid. They indicated that Kitchen Aid was going to do nothing about it. I have been without a microwave for more than a year. The Model of the microwave is KBMC140HSS03,serial #XR1601613. I have emailed Kitchen Aid direct, and they have refused to contact me about this unhealthy issue. Prather Services technician was very alarmed that our family had been using this appliance for preparing food, for at least three years, with the cigarette ashes inside that came from the factory.

The door of my stainless steel dishwasher looks horrible. Streaks down the front and spots that wont wash off. My other appliances wash off with just soap and water. I can not get the dishwasher clean and it isnt even a year old. I am so disappointed.

Delivery, installation were excellent. The Stove and oven are high grade, fine make, durable. Great looking design with easy clean access. Wear and tear is nominal. Been over an year and still looks new.

While at my parents house they described a plastic odor from their Kitchen Aid Convection oven when the oven is used (all electric). I turned the power off inspected the connections on the outlet for the oven and also the connections to the oven itself. All are tight and no signs of heating up etc. I plugged everything back in and we turned it on, nothing at first but after about 3-5 minutes you could smell an odor from the upper portion of the unit. Again turned everything off, opened up the back panel and there it was, the oven control board had a larger connector which feeds power to the oven elements and it was melted to the board. I removed the board for replacement. A local company near us (Servall) had a heck of a time finding this part and the connector as well, the board is manufactured by Eletrolux but is in the Kitchen Aid. As of now, the cooktop just works but no displays since the oven control board also controls the displays. I am a master electrician with in-depth knowledge of controls, there has to be something wrong with the board from Electrolux which has been causing all the headaches for all these customers. I am not sure if the self cleaning function has been used but will recommend that it not be used unless someone is there and they want a possible fire. What a shame and shame on Kitchen Aid for not doing something for all these people who have paid in excess of $1000.00 for a heater. Buy another brand and let other know about it as well, Electrolux is a large company or brand that is well known in Europe for its quality, too bad Kitchen Aid botched this one up. Someone needs to step up to the plate make it right before someone gets hurt. You can fix a house but not a life.

Our 6 year old top of the line KitchenAid dishwasher control panel has gone out again for the third time in two years. The appliance repair company thinks there may be an underlying issue with the wiring harness. KitchenAid/Whirlpool has refused to provide any goodwill support because of the age and told me to buy another one. Really? The last KitchenAid dishwasher I owned lasted almost 20 years. What happened to KitchenAid quality? Not a happy customer with a whole kitchen full of fairly new KitchenAid appliances.

The spring on the detergent dispenser door of my KitchenAid dishwasher (Model KUDT03FTSS0) has broken. Replacement entails popping off the dispenser door, placing an inexpensive ($2 to $4) replacement spring on the spindle, and popping the door back into place. KitchenAid refuses to supply the spring -- my only repair choice is to replace the entire dispenser for $90.00.

KitchenAid range was purchased then failed 13 months later. Appliance was fixed under extended warranty that I purchased. Now 14 months after being fixed, range has failed again with same issue. Research showed that this same issue has happened to multiple people with same results. Whirlpool/KitchenAid is in denial stating no recall, no service issues.

I purchased a new KitchenAid Superba EQ Series 24 dishwasher model KUDE40FXBL4 from Sears.com on November 21, 2011. The appliance was delivered and installed on December 5, 2011. In May of 2012, the dishwasher stopped mid-cycle and would not drain the water from the tub. The control panel was totally non-functional. On May 18, 2012, a factory authorized repairman from A&E Factory Service attempted to repair the dishwasher by replacing a bi-metal fuse. The dishwasher functioned until June when the same repairman returned on June 1, 2012 because the dishwasher had again stopped mid-cycle, would not drain water and the control panel was non-functioning. At this time, the repairman installed a controller and fuse. I told the repairman I was very concerned that the dishwasher had to be repaired twice within a two-week timeframe. I also mentioned the fact that the dishwasher possibly could be defective and that I did not want an appliance that needs constant servicing. The repairman assured me that KitchenAid would replace the dishwasher if it continued to break down.Yesterday, December 6, 2012, one year and one day after the initial installation of the dishwasher, the dishwasher again shut down mid-cycle. I spent over an hour on the telephone attempting to get a satisfactory resolution from KitchenAid and/or Sears. I was not satisfied with anything KitchenAid or Sears offered. Their basic answer was that I should have the appliance repaired and buy an extended warranty. My answer to that is why throw good money after bad? All that accomplishes is to make the purchase price of a defective product cost even more. If after two service calls during the first six months of use KitchenAid factory service has not been able to accomplish a complete and total repair of the dishwasher so that it does not breakdown every six months, then purchasing an extended warranty will not fix the defective product.I was a loyal customer of KitchenAid products prior to this bad experience. I had a wonderful KitchenAid dishwasher prior to purchasing this defective model, but the wire baskets needed replacing and were so expensive. I thought it wiser to invest in a new dishwasher than to put new baskets in a 10-year old dishwasher. I now realize what a foolish decision that was. That dishwasher is still functioning perfectly in someone elses home while I am facing the possibility of dealing with a defective appliance that will require servicing every six months or replacing. Either way, I lose. It is my educated opinion that KitchenAid should replace the defective appliance and recall that model.To the reasoning mind, the thought occurs that these breakdowns are a built in ploy to sell extended warranties and thus keep the parts and service departments also in business. While this practice of planned breakdowns may appear to be a revenue generator equal to or greater than planned obsolescence, it may prove detrimental in the long run. As a particular and wise consumer, I will find another manufacturer of a longer durability and better quality product or just give up the dishwasher all together. The consumer does have other options. At any rate, I refuse to be forced into paying additional funds for a dishwasher that is not functioning up to the original expectation of the purchase price of $1,377.01, which is an overcharge for a product that only works for six months at a time.

Im a Hurricane Sandy victim - most of my house wiped out. Rebuilt and purchased all new KitchenAid appliances in 2013. Within a few months, dishwasher had a leak (fixed) and rust spots and discoloring of door panel - poor quality steel. Customer Service says these are cosmetic and they are not responsible. Rust spots probably because we live near the water. ABSURD! ALSO - electronic panel on door failed - option lights not working, trying to get fixed.Refrigerator- Control panel failed- shows false high temps and warning lights - was replaced. Failed again. Trying to get panel replaced again. Quality Control needs to look at hundreds of complaints on the internet. Still have great stress from Hurricane Sandy - KitchenAid is causing more stress. Very unhappy - spoke with my contractor about dropping KitchenAid from their product line. What happens when the warranties expire? Will I have to pay for these future quality failures? Would not recommend your products.

We had the same experience in 2008 with a 2005 KA range. I dont know my model number because it is not inside the door. I hadnt used the oven in at least 5 days. I was sitting in another room working and I heard what I thought was my cats knocking over their food. When I went to investigate, nothing was disturbed. Then I looked at the oven and there was a pile of glass on the floor. Since oven was out of warranty, we had an appliance repair done by local professional. I will never buy another KA large appliance.

I originally purchased a KitchenAid refrigerator (model# KRFC604FSS) May 313 2017, along with 4 other KitchenAid appliances (this is a new build). All but the stove arrived 6/21/17. When we plugged the fridge in, it was making a very loud noise and many of our contractors said it was abnormally loud and I should call Pacific Kitchen & Home/Best Buy. When I did, I was told to talk to the Geek Squad and then call KitchenAid directly. That was the beginning of long wait times on the phone, automated voice messages, getting disconnected after providing endless details (they cannot call you back) and waiting to speak with a human that could take action. When I finally did speak with someone they argued with me about the date of purchase (which I have the receipt for) and how loud the noise was. They refused to replace the fridge and sent someone out. The first time I sat home for 8 hours and no one showed up. They rescheduled. The second time, they said they would be there between 8 and 12. They didnt show up and said they would come at 2. I was not able to wait, so I asked to cancel, and they said they couldnt cancel the appointment after the driver was already en route. They showed up and no one was here. When I called to reschedule they said that I wasnt there for my appointment which I explained was not the case. Then they fixed the fridge but not the dent or the rust on the front door. So I started the process all over. Finally after many calls and arguments, asking them to just replace the door, they refused and sent me free stainless steel cleaner. Pacific Kitchen & Home agreed to replace the fridge since they thought KitchenAid should have done this. The new fridge came the end of September. The ice maker stopped working early December (who needs ice during the peak holiday season?) So I made another appointment and they then canceled it, a few days before. Today the repairman came (12/29) and said that he didnt have the parts. He will be back next Friday. So this is the general gist of my experience so far. When the repair person arrives he is polite and does his best. Pacific Kitchen & Home have also tried their best (by replacing the fridge in September). The bottom line is that KitchenAid produced a poor-quality product, would prefer to fight with the consumer than provide service, and sends their repair people out without the required parts. It is important to note that this fridge was over $2600 and I have now had to take time off from work, on four occasions, and it is still not working. I have had THE SECOND fridge in my house for three months. It is still not working properly and failed during the month that I have the most people at my home. I would HIGHLY RECOMMEND going elsewhere with your business.

We have been having problems with our new Kitchen Aid 29 cu. ft. stainless steel refrigerator since they first delivered it to our home July 19th 2013. 1st, had to have a shim kit installed on the freezer door. 2nd, we had frost built up and issues with the ice maker, (they had to come back out 4 times to repair this problem). Finally they replaced the board with an upgraded board which has worked so far. It only took from July 2013 until March of 2014 to fix that problem. Now we have put in for another service call, because we have ice forming under the freezer drawer. Will this ever end? Im getting so tired of calling for service for this appliance.

My dishwasher doesnt work properly, it stops in the middle of the process...One out of 5 times it works but the dishes still dirty...It is a piece of crap. Furthermore, I got a leaking 3 years old whirlpool fridge which is in fact from the same company! Do I have to tell more?

This fridge was bought at Fergusons in Florida in late 2006 (shipped overseas) and it has been a total disaster from the date of arrival. It is an extremely expensive fridge, over US$6,000. Stainless steel, architecturally designed fridge. Came with NO freon and the ice maker never worked. Took us about 6 months to get the part for the ice maker which the company did pay for the part considering it was a brand new fridge. Since then it has been one repair after another. Every year we are looking at a major repair and to source the parts is a living nightmare. Drops temperature very quickly.Right now it has been working poorly for over close to a year and we have spent about US$1,500 in new parts and still not working properly. Very cheaply made inside, always frosting up, wire baskets in the freezer part are all rusty. Need to try one more repairmen and if he cannot fix it have to throw out a fridge that looks perfectly NEW from the outside. The dishwasher arrived without a handle and we had to argue with Fergusons and KitchenAid to get the handle as if it was an option on the dishwasher. Has never worked properly and was only used about 25 times and just gave up on it.KitchenAid Double wall Oven KEBC208KSS0, worked well until about 18 months ago. Stopped heating properly and cannot find any repairman that can tell me what is wrong. Looks perfectly new from the outside. Note: all these appliances are stainless steel. Bought a food processor the other day 12 qt and it was never working from the start and had to return it. When I returned it found out that many are returned for the same reason. KitchenAid is a pathetic company. They should be ashamed to even call themselves an appliance company. Furnished my entire kitchen with stainless steel KitchenAid appliances and out of the fridge, double wall oven, dishwasher and hob cooker (total about US$10,000), after 7 years ONLY the hob cooker is working (and what can go wrong with that?). Another point, our goods had to be shipped overseas. We are convinced that retail outlets in the USA ship out defective goods especially in Florida where exports to Caribbean and South/Central America are high. Defective merchandise is sent to our region because guess what? Warranties are not applicable when the goods are taken out of the USA. I am happy to send you copies of the bills for all the items and reams of correspondence with Fergusons.Updated on 12/7/2015: I have exhausted all attempts to try and repair a KitchenAid Fridge we purchased at Ferguson Enterprises, Inc, Tamarac, Florida. 24.7 CF Architectural Designed SXS Fridge. Model number#KKSSC42FKS. At the time that we purchased the KitchenAid appliances, we wanted quality products as the items were being shipped to the Caribbean. We thought the KitchenAid brand was considered a quality product. We paid $4,741 for the fridge (excluding shipping and duties and taxes in our country). With all due respect to KitchenAid, the products we purchased appear like quality appliances. All are stainless steel with an excellent finish. That is the dilemma. The fridge looks brand new on the outside, but for the last year it has not been working. It is still in my kitchen as it is built into the kitchen wall and as I already stated it looks perfect from the outside. The big problem is that try as we may, we cannot get the part that is needed for this fridge. I have had 2 parts shipped to me at considerable expense and both are not the right part. Our technician who knows KitchenAid appliances says that we are getting the part for a new model and we need the part for the old model. PART REQUIRED: KitchenAid fridge, Model KSSC42FKSO1. Serial #QM4308660. Power supply board #10155702BO 19/0ct/04. EU 1156 02. These are the numbers that I got off the board. The board goes into a case and the case has written on it: Embraco EU 1556 02B 04. Compressor Electronic Control Unit - UCC2. The first part we purchased was from Angel Appliances. They sent me the part which as we have already said was the wrong part as it is for a new model. It was sent back to them. We have a purchasing agent in Florida who went direct to the KitchenAid factory for the part and it is still the wrong part, actually the same part that I got from Angel Appliances in California. I had a young lady on Skype from KitchenAid parts department the other day and she is the first person to tell me outright that the part I want is no longer manufactured for the old model fridges. She then went on to say that the new part that was sent to us is supposed to fit the fridge that we have. When I explained that the technician says that it does not, she then said that is probably needs some adjustment. When I asked what kind of adjustment? The line went dead. This is a typical trick. As soon as the question gets uncomfortable they hang up on you pleading the line went dead. I did not want to go back but this fridge has been a white elephant right from the start. It arrived in a beautiful crate but when it was unpacked it was not working. It had no Freon. When it started working the ice maker did not work. It took us forever to get the company we bought it from Fergusons to send us a new part for the ice maker at their cost. Then in 2009 we needed an electronic board and had to search for months before we got it from Marcone Supply Appliance, in Miami, Florida. I have had to replace the defrost heater, evaporator motor, all the rubber seal around the doors, only to name a few. This fridge is down continually and I hate to say but the mechanics for the working of the fridge is a terrible quality. Of course, warranties given in the USA fail to work in the Caribbean as the excuse is the appliance has been taken out of the country. So we are left with an appliance that looks perfect but for which we cannot get a part. I love the look of the fridge, its size and its capacity. However, the length of time it takes us to get parts that work and that fit the fridge make it a living nightmare. Yet, why should we have to throw it out? It makes absolutely no sense. Also how can your company justify not making parts for a fridge that is 12 years old? Is there anybody anywhere that can resolve this matter because we absolutely have no idea what to do other than throw the fridge out?

Every Kitchen Aid appliance we own has failed. We have had multiple repairs to the refrigerator (compressor failed), dishwasher (door hinges made of cord failed), oven (multiple problems), microwave door, etc. Only after I started blogging all over the internet, did Whirlpool partially compensate us for repairs (that is a very long story). This month, the plastic tabs holding the vent above the microwave broke, and the oven racks rusted when I washed them. The oven self-cleaning cycle doesnt work very well either. I will never, ever, buy a Kitchen Aid product again. I will tell my story everywhere.

The knobs on this range are made plastic on metal posts. The first knob wore and broke within the first year of using the range. The ceramic top range is slow to heat and then superheats once cooking begins. The oven temps are way variable and cooking times are way off from recipes. I have ordered two new knobs at the cost of almost $40 and I know that the other two should be replaced as they will break any day. I use my range nearly every day and thought that KitchenAid was a good brand when I bought it. I am sorry to say that I do not recommend that anyone buy this brand right now. Maybe they will improve but I think that they are making their money on replacement parts.

We purchased a top-of-the-line Kitchenaid dishwasher 2 years ago. In the first year, we had 4 service calls for various problems. The last problem was for poor draining and residual soap in the bottom of the unit. Things were replaced and the door was taken apart, then reassembled. The problem persisted. I went online and did my own research and found the solution. Each repair person was sure to remind me to keep the rinse agent full. Turns out that when you have a water softener, the rinse agent is unnecessary. Now the entire door is showing rashes of rust.We called today and were questioned how the door was being cleaned. It is cleaned with a weak soap solution and immediately dried with a very soft microfiber cloth. Okay, so its not a maintenance issue. It is a very low grade of stainless steel. Magnets stick in the door readily, but not on the stainless handle, which is obviously a higher quality of stainless. After speaking to a manager, we are being sent a cleaning solution and a polishing solution. Sadly, had we researched before paying so much, we would have been informed that this is a chronic problem with Kitchenaid and they refuse to acknowledge the problem, nor will they offer any satisfactory solution. This dishwasher was bought to replace a 27-year-old Kenmore unit that just wasnt getting the dishes as clean as it used to. When it was taken to the junk yard, it looked like it did the day it was bought. The stainless parts were flawless. Dont make the same mistake we did. Take a magnet shopping with you and avoid Kitchenaid.

My KitchenAid Superba Ovens thermal fuse has burned up for the 3rd time after the self-clean cycle. Every time I have called KitchenAid, they tell me they are not aware of a problem. Well **, there are more complaints than I have time to read. Even the repairman knows what the problem is before he even looks at it, he has fixed so many! I will be cleaning my expensive oven with Easy Off. Never buy a KitchenAid or Whirlpool product!

We bought a new KitchenAid gas range Model in 2014. The model# is KGRS505XSS. Within 1 year, one knob got stuck in off position. We had to pay $150 to service appliance person to get that fixed. Then less 1 year later a different knob has been stuck in off position. This is completely random and happens when were not even operating the knob. An amateur layperson cannot fix it. For the 30 years that we have been owning other gas ranges and operating it in similar home type situations, this has never happened to us. This KitchenAid unit is defective OR this could be a basic design flaw. Beware of this type of problem and do NOT buy KitchenAid for this reason.

The KitchenAid Dishwasher we purchased does not wash dishes well. The warranty went out a little more than 30 days ago. Two weeks ago, the SaniDry Cycle wouldnt work. Technician came out and reset it. Now, circuit board is out today. The repair bills and part is almost as much as we paid for the Dishwasher to begin with. Sears has discontinued selling KitchenAid dishwashers...!

In spring of 2011 we re-modeled our kitchen and purchased 3 KitchenAid appliances: dishwasher, refrigerator and microwave. On Sept. 10, 2016 I called a KitchenAid authorized repair shop (Dan Marc Appliance, because the top inside of my microwave had a hole in the roof). On Sept. 14, the technician arrived and I was told the part will be ordered. On 9/29/16, I called Dan Marc for an update but they had no information. On 10/3/16, I called Dan Marc again and was told the part was on back order. On 10/21/16, I called Dan Marc again for an update and they told me the part would be in by 10/26/16. Its now 10/30/16 and I havent heard from Dan Marc. I would buy another microwave, but Ive already paid Dan Marc for a service call totaling $120. My microwave is only 5 years old so I cant understand why it takes 8 weeks to get a replacement part. I will never buy another KitchenAid appliance again!

My brand new Kitchen Aid KBLS22KWMS arrived yesterday. Its a bottom freezer, single top door model. The bottom deli drawer kept sticking every time I opened it, so I took the drawers out, to try to find the problem. Thats when I saw that the molded plastic, on which rests the shelf supports on the deli and crisper doors, was very thin, and could be pushed in with just normal pressure from my finger. One of the supports was dented in already. Crisper drawers and the deli drawer are held by plastic frames, with no metal at all. Only the top shelves have full metal support. All the plastic is really shoddy workmanship. I have no faith that this fridge will last even a year, much less 5. Its going back to Lowes tomorrow. I had thought that Kitchen Aid was supposed to be a higher end appliance from Whirlpool. Now I will not buy another Whirlpool owned product.

Bought this particular microwave based on looks and price. Turns out its been a pretty good purchase and has outlasted all the others Ive purchased before it. The mechanical bits are kind of a pain though: The door mechanism is iffy sometimes; and the wheels on the ring below the turntable arent of good quality polymer... One chipped at some point and now it goes thunk, thunk, thunk as my meal/drink/whatever is warming up.

We purchased a KUDE40 dishwasher in January of 2011 complete with stainless steel interior. The top rack glides keep popping open, letting the rack fall off. To make matters worse, the plastic wheels fell off the top adjustable rack due to the breaking of the plastic pieces that hold the wheels in place. Of course, this happened right after the year warranty was up. Luckily, I saved the service call and ordered the part online for $25 each and replaced the parts myself. Based on what I have read on other places on the internet, this is a problem for everyone and KitchenAid will do nothing about it. I will not buy another KitchenAid dishwasher and plan to tell as many people as I can not to buy one either.KitchenAid needs to listen to the public and fix this issue free of charge. If it happens to you, order the part online and carefully disassemble about 4 parts to replace the plastic piece with the wheels. A small screw driver to pop off the plastic parts was all that was needed and we used the other side as a guide to what goes where were putting it back together. Total time: about 15 minutes to replace one side. The part is the same for the right and left sides. Save yourself the service call!