I call in to Customer Service to get someone to fix my washing machine because it wasnt working and when I called, I forgot to have my washing machine serial number at hand. The person on the other side told me that she cant wait for me to get the serial number more than 2 minutes and I ask myself, if they cant wait for me more than 2 minutes to get my serial number, then why should I wait a week to have someone fix my washing machine?

We purchased this microwave from Lowes. It already had a cracked handle but I wanted to change my appliances to Stainless and it was very cheap. I could just order a new handle and we would still be saving money. I received the new handle and it was very difficult to install, but I did it. Not even 2 months later, the same thing happened to this handle. We thought Lowes had somehow broken the original handle, but after reading all the other complaints, I realized that its a manufacturer problem. Last night, I was cooking on the stove and the plastic from the handle fell into the pot. I had to throw the whole pot of very expensive, and time consuming meal away for fear of eating the plastic.

Where to begin? I bought Whirlpool Duet Front-Load Washing Machine about 11 months ago after my top load bearing went bad and start making a lot of noise after 8-9 years. 4 months ago (6 months from purchase) it started to act strange; washing machine will not unlock after a cycle, start throwing F3E1 error. Thats when I first called their support service. Their service technicians are very nice actually. They seem to be local small appliance shop, contacted out by Whirlpool, from my guess. Initial visit was to inform me that Im using WAY too much soap, while I was only using well below what was recommended by Whirlpool manual. RED FLAG #1. Technicians told me to stop using too much soap or start using POD. Also to flush my washing machine with 2 cups of white vinegar in hot cycle every few weeks. Ive changed my soap to Tide POD and starting flushing my washing machine immediately after he left my house. It was running OK, but I still saw F3E1 error at the end of every other cycle, until... thing went really bad one day, it simply stopped responding any command while clothes was still in the washing machine. I unplugged power cable and plug it back, it hums for 10 mins and in the end it was the same result. After several attempt, it finally unlocked itself, thus I could wash my clothes at my parents house. This is when I called support service 2nd time. The same technician came and this time, I had video recording of everything. He could not dismiss this with simple soap theory, so he opens up the washing machine and tells me that its due to bad control board. He proceeds to order new control board, which took a few weeks. New technician comes back with new control board and installs, runs a few test command (not full cycle) and leaves. During this whole time, Im left with no washing machine at home. Good thing I travel sometimes and laundry is done remotely sometimes. This repair didnt improve the situation much. I called them back for another appointment. Another technician comes back and tells me that Whirlpool sent back BAD control board. Now, Im really suspecting their product is really piece of **. At least at this point, I was still happy with their service. He leaves my house claiming that they will order new control board and re-install.A few days later, I receive a call from a lady, claiming that Whirlpool has instructed them to ask me to use different outlet, since they believe my outlet is causing issues. Now Im really pissed. Coming from electrical engineering background, I know theres always any chance, but they should double check this with their own technicians. Anyways, I perform their recommendation, which I knew was a shot in the dark. During this whole ordeal, Im working on a project that are out of state (CA). Not only do I have time to stay home for all these service visits, but Im not even home to test my washing machine. During one of the holiday, I was able to take a few days off. This is when I decided to take different approach. I went to the retailer, whom I purchased my washing machine from. They were also nice, but theres so much they can do.I called Whirlpool direct line to explain my situation, how unhappy I was, and to replace my washing machine. Their response was by the book: We can only execute our warranty policy and replacement is not part of warranty. The representative specialist had enough nerve to ask me why I have not called back in several weeks and continue to repeat it as if its my problem for not reporting back. I had spent 2 months of supports and 4 site visits, where I had to reschedule my work or take a day off, before travelling for projects after holiday seasons. This representative really took customer service to next level of hell. In the end Im without properly functioning washing machine for 4 months. I have to coordinate with my parents to use their washing machine when Im back home. My advice, you should really think 3 times before buying Whirlpool washing machine or any other appliance. Also consider that youre on your own, when their product malfunctions, and youll be sitting on dead appliances.

Whirlpool Cabrio Platinum top loader 2014 model - This washer is an over engineered piece of junk. It takes forever to wash anything and it never gets anything clean. I wish I would of just bought the repair parts for my old machine which I had for twenty-three years.

We purchased this Whirlpool washer 5640XW3 from Lowes. It doesnt clean the clothes. Even if I run them through a second wash cycle, the clothes are still not clean. Called Whirlpool and they said nothing is wrong with it. I use HE detergent and load clothes around the agitator as directed in the manual. Still, clothes are not clean.

We purchased the largest Whirlpool Cabrio Washer (over $1100 value) 3.5 years ago, and had nothing but trouble out of it. The drum has had to be replaced twice, the motor once, and then supposedly a bolt kept coming off on the drum as well, that had to be tightened twice. Now, we dont know what is wrong with it - we suspect suspension imbalance or something, because this extra large capacity washer is constantly unbalanced even with 6 articles of fabric in it now, and I dont even think about putting even what would be considered a medium-large load in it, because it flat up will not wash. You can put a level on it, and it shows leveled, but it still wont operate worth anything. My wife is so put out by it at this point that she has even talked about getting an old ringer washer (seriously). Sears keeps coming out here because we had purchased the extended warranty and truly if they had simply replaced the washer after the 2nd trip to the house, they would have more than paid for the replacement washer even. Instead, they keep coming, looking at it, then having to order parts, and then come back a couple weeks later to put the shipped parts (which sit around our house), back in to repair it each time. All the while, we go without a washer or barely can wash any clothes. We have even taken clothes to the laundromat during one of the repair instances, because we cant just have mounds of clothes piled up for their month-long service. It is ridiculous how little it seems that Sears and Whirlpool care about their customers. I have gone to Whirlpool and Sears Home Services sites and complained at both. I have called both of their 800 lines in the past and again, this yielded nothing to truly depict either company cares. It just goes to prove that customer satisfaction is far less valuable to either of these companies than the bottom dollar profits in our opinion. I dont know where else to post our concerns/frustrations, so anyone can see how put out these two companies have caused us and dont care, but if anyone knows of anywhere else I can post blogged concerns, please let me know.I have complained previously about a dishwasher that we had purchased that we had numerous issues with. Those complaints fell on deaf ears to Whirlpool and really Sears as well. I dont think all the washers are duds, but this one has been nothing but trouble, and Sears wont just replace it, Whirlpool dont care. I have been given the runaround that it is because there arent three (3) service calls in a 12-month period for the exact same issue. Well, I am sorry that it doesnt appear to be just one thing! I have had it with these services calls, parts having to be ordered, only to hit the crazy repeat button again every time! This is far from good customer service, in my opinion, but rather a way to ensure the most profit is achieved! Thanks.Sears and Whirlpool have the worst customer service ever!

The washing machine started leaking and making a noise like a freight train 6 months after purchasing it. We complained in February 2011, but the parts were not available until March 31, 2011. The same problem occurred in September 2011, and we are still waiting for the parts until October 18, 2011. In the mean time, I have been spending hundreds of dollars doing wash at the laundromat.

Cabrio washing machine WTW8600YW0 - Had this washer for 3 years. Its been repaired a few times, but this last time theyve replaced the bearings 3 times and it only lasts less than 1 week. This $1000 washer is now going on the trash. I tried to get help from WP, to no avail. There is a reason these are only warranted 1 year. One thing I liked about it: the fast spin speed gets clothes drier. Every other aspect is crap. Cleans very poorly. You cant make it use enough water. The tub looks huge because it doesnt have a conventional agitator. But if you put much in there you will end up rewashing in small loads because then it REALLY cleans poorly. I bought this because my trusted appliance store owner buddy said he owned one. When I asked him lately he doesnt talk much except admits that yes they have had a LOT of trouble with these machines. The life is very short on them. The wonderful fast spin speed destroys the light bearings quickly. And it gets worse the more its worked on. Its a disposable $1000 piece of trash. Im an engineer, and whoever designed this should have his degree revoked. The type of agitator it has and the extreme low water is very hard on your clothes. One zipper left loose will shred your clothes. I wanted to love the thing, but I have to hate it because it is unrepairable. If you could control the water and if it lasted at least 5 years without having to rebuild it several times at greater cost than it was purchased for, I might be less than rabidly angry at WP. They know they are junk but dont care. You have few choices as they now own most brands, and they know this. I have a Speed Queen on order. Just a plain old simple washer.

Two water heaters three yrs old that went kaput. Thankfully, they are under warranty. However, the tech that I called out said that his company doesnt work on Whirlpool because they are junky and they try to blame the tech if something doesnt work. I called to get new part, and of course now, I get to pay for labor. The lady on the phone actually suggested that I hire an electrician and replace a breaker instead of receiving parts for Whirlpool. Unbelievable. Needless to say, I echo all of the same concerns as the other posts. Im done with Whirlpool.

Just about three years old our washing machine started making a horrible noise and soon after a horrible smell. Won’t complete spin and dry. The bearing inside the drum has failed. The pump is making an unusual noise. I see a lot of reviews about this product. I find it strange that it appears to have a good rating at all the advertisers but in reality it’s really a horrible machine. Shame on Whirlpool for our landfills, dumps and recycle bins with absolute garbage plastic and metal Has to be recycled. We have only disposable garbage for appliances.

I have had my refrigerator for more than 10 years. It is a standard refrigerator with no extras and I have never had any problems with it. I think things that dont have too many extra built into them are better with not so many things to break down.

After reading many of the 1,500 +/- complaints about this inferior product, I guess I should consider myself lucky. Ours didnt fail until this past Saturday, March 22, 2014. We purchased this Whirlpool (American Water Heater Company) water heater FG1H4040T3NOV at Lowes, and had it professionally installed, in October 2004, and we have had no issues until this past Saturday when we woke up to no hot water. After checking for the obvious, and finding no apparent cause for the failure, I considered it a fluke and relighted the pilot. The pilot took a few attempts to light, but it lit, and the burners came on.Three days later, we woke to no hot water again. This time, we placed a service call to the company that did the initial install. The technician came out, and after his inspection he informed me that the thermocouple/burner assembly needed to be replaced. He also informed me that this is a well-known issue, and Whirlpool has been sending out free updated replacement parts. He called Whirlpool, only to be told that they are no longer offering free, updated parts. Whirlpool also cited that the water heater was out of warranty (by less than 5 months). He gave me Whirlpools number, so I could contact them myself.As I smelled a rat, I began to do some online research about this issue, and, to my chagrin, I found out that I was far from alone with this issue. As of this writing, 1,500+ consumer and professional complaints, a settled class-action lawsuit, etc., etc. I contacted Whirlpool, explained my situation to the support rep, and, he proceeded to tell me that he couldnt help me with free replacement parts, due to the warranty being expired (less than 5 months). I argued with him, stating that this is not a warranty issue, but is in-fact a design/manufacturing defect issue, that has resulted in a redesign/re-manufacture. I cited the myriad of online data and negative testimonials, and I reminded him about the settled class-action lawsuit on this very topic. He acknowledged all of the above, was unimpressed, and offered to sell me the parts.After 15 minutes of back and forth, I asked to be escalated to the next level. But, of course the supervisor was unavailable, and If Id care to leave my name and number... yeah, right. Bottom line, Im very angry! I paid good money to Lowes for Whirlpools product, with a nine-year warranty. I had it professionally installed, and we have no hot water due to poorly designed parts. And... I am being forced to purchase the redesigned parts. Its truly unsatisfying to be an American consumer these days!

My whirlpool Cabrio washer top load had the rust problems, bearing problems, support arms replaced along with the complete drive assembly motor bearings and all the parts. My bearings have failed 3 times since 2009. This machine is junk. Customer service at Whirlpool is a joke. They treat you as if you have had to do something wrong. Finally I spoke with a salesman who said speak with the warranty company. I have the extended warranty which I advise everyone who purchases an appliance to get one. So I spoke with them and they sent me a check for a new machine. I must say our warranty company has been very helpful. So THIS IS MY WARNING TO ALL. PLEASE DO NOT BUY FROM WHIRLPOOL. IF YOU DO YOU DESERVE WHAT YOU GET, SORRY TO SAY... Have a great day.

Whirlpool Water Heater bought May 2011: Water heater not heating. I called Whirlpool and they stated the equipment is under warranty but not the labor; $137.50 for 1st hour of service. Troubleshooting is a joke. It just doesnt heat. Waiting on the 3 plumbers to call me back. They are busy. Water heater went out Sat morning and Whirlpool doesnt open until Monday. Its Monday at 5pm and Im still waiting on a call back.

I bought a model (W10632082 A) dishwasher, and the top shelf is very flimsy, the dishes and glasses do not get clean, even after I fully removing any food soil from them. The dryer does not work. The dishes come out wet and with water spots. It is very noisy, and the water cycles are programmed to run upwards to three hours!!! The basket for the silverware is designed to be hung on the door, this basket falls off easy, and you cant use the left side because the normal size of the spoons or forks, get in the way of the dish washing soap reservoir, making it difficult to close the door. Do not buy this product. Horrible!!!

I found this site while looking for a part number for the thermocouple. Lowes had one, but not for the FG model. I decided to call the number on here from Chris to see where I could buy the correct one with left-handed threads. I was told that they would sell me the conversion kit, but I couldnt get just the $8 thermocouple. Then $47.90 later and the conversion kit is on its way. Im not happy about it but at least I got 6 years out of my water heater before the thermocouple failed. The plus side is next time, I can get the $8 part from Lowes and not be without hot water for a week.

Bought a Whirlpool range in Nov. Within a month the large burners fell apart and the reflector bowls discolored from normal use. Call Whirlpool and they sent out replacements. Within a month the first replacement fell apart and the new bowls discolored from heat again. I held off calling until the second burner fell apart and this time when I called I was told I would have to stay home to wait for a service call to have burners replaced which I could do myself and that the bowls arent covered and that it normal for them to discolor with normal use. They said I should wrap them in foil to protect them.They appear to prefer wasting time and money rather making a good product. The burner bowls from my old GE stove are still shiny after many years of use but Whirlpools cant hold the finish for a month. Please note I was an appliance tech and ran an appliance repair business for 18 years. These failures are not normal or acceptable. I will never buy Whirlpool again.

When I bought this stove, I already had a glass top (Sears) which was satisfactory but I changed to get a convection oven, never had a problem cleaning the glass top. To me, Whirlpool was, and I emphasize WAS, a reputable manufacturer and the stove offered everything I needed. Not so, the glass top is a nightmare to clean; no amount of elbow grease works. It is like cooking on a mirror. Talked to everyone I contacted but, it seems, I am the faulty element in this problem: I DONT KNOW HOW TO CLEAN!!! YOU NEED A FIRST OF SOMETHING FROM TIME TO TIME AND THIS WAS A FIRST FOR ME.They told me the only solution they could offer was to buy their own cleaner. Why do they need to market their own cleaner? I did not buy a museum piece that needed to be treated with special care, I bought a stove to cook on. I want as many people as possible to know about that uncleanable glass top. Every time I need to cook, I cringe at the amount of time and effort I will have to spend to get it clean. I am not a novice, I have been doing housework for the past 60 years. Beware, it is a most frustrating situation to having paid top dollars and to be stuck with a product that brings such frustrations. By the way, it was bought at The Brick in Canada. They were not helpful either.

Whirlpool Cabrio Model WTW6500 - I ask all of you to stay away from the Whirlpool Cabrio sets. I have spent hundreds of dollars trying to fix my washer. I just spent $260 for a computer board. Now it stays on rinse cycle. So now I need the motor sensor harness which is another $90. Service call $80 x 2. So, now I am going to take the computer board back and get my 260 dollars back. For the cost of $400 to fix this washer. You can go and buy a new one for around $400. Then, Im going to the lawyers to file a class action suit against Whirlpool. So, owners; be looking in your mailboxes for a class action suit against Whirlpool for those who own the cabrio set. Im tired of having to deal with whirlpool customer service. Maybe, whirlpool should think of having their laundry made back in America.

Everything comes out clean and it doesn’t cause items to be tangled around each other. It has a setting for every possible type of load. I especially like the option of having “deep water”. Not having a “glass” lid is a plus.

Water filtration unit was leaking only when someone got water. It pooled into the bottom of fridge and ran out under the fridge and because of the slope of the floor was running back towards the wall. We didnt notice until our laminate wood flooring was starting to swell up. It was probably leaking since the day we bought fridge brand new, but took us 4 months to notice. Whirlpool said they will not fix our flooring, only the fridge. We had to make a homeowners claim which we did. When the contractor moved the fridge back after replacing all flooring it starting leaking from the ice maker unit. Only when the ice tray filled it would gush out water. Our flooring is now ruined a 2nd time and Whirlpool will not fix the floor. Repairman said that Whirlpool used rigid parts in the water and ice maker units and tons of people are having the same problem. Since there is no flexibility in these parts they break when the fridge is moved. Whirlpool sucks and I am fighting with them and Lowes to get this fridge replaced with a non Whirlpool appliance. I will never buy Whirlpool again.

They have sent three specialists to look and assess the Whirlpool washer and dryer that I have. Both stated that the washer does not function correctly; the last repair man stated that he had seen many like this and they have a history of unreliability. I would like my money back, not a repair, as they do not even use just cold, but a mixture of both hot and cold. I had bought them specifically because I thought they only used cold, which was stated by Whirlpool. This is wrong advertising. I would like my money back. I still have the receipt and I am seriously unhappy with the washer and dryer, period.Since I cannot use the machine, which I had bought for $1600.00, the washer and dryer is now sitting in my basement. While whirlpool is saying that they wont take back the washer and dryer even thought it has a warranty. I had paid it in cash and I do not see why I should be forced to keep a broken washer and dryer set. I will contact my lawyer to consult this issue with Whirlpool.

The salesperson was great but we are not happy with our washer. We already had it swapped out once because of white spots showing up on our clothes. The only thing they could think of was that the bleach I used wasnt rinsing out completely so it showed up on our clothes. Recently, I washed a table runner by itself and it had some red in it. Now there are red spots on a couple of items that I washed after the runner. My husband just now asked why there were red spots on a shirt that he wears all the time. I explained. Also, we have had some white spots on clothes and I could scratch it out without leaving a permanent mark. Were no longer using bleach and we use only liquid detergent and all of it is HE. So I dont understand the machine. I hate it.

I bought a HD Whirlpool in April 2011 and I hate the machine. It does not use enough water to wash clothes. I open the lid every wash and cannot believe Whirlpool can label this as a washing machine; it spits a little water now and then. I am demanding Lowes and Whirlpool to replace the washer. I have used two Kenmore washer for 45 years and I never had any problems. I use hot water to kill germs -- well there is not enough water to drown a fly. How can these manufacturers sell such product and then give the consumer such a hard time when they ask for help. Dark clothes have white residue stuff all over them. I have to hand-wash a lot of my clothes. I have never in 45 years had to do this. I am so mad that Whirlpool is taking everyone for suckers. Now I am sure that there are a lot of people who just never take the time to complain; too much trouble and just go buy another brand of machine. We consumers need to demand that manufacturers sell quality products.

I have a Whirlpool oven and dishwasher and have had nothing but problems with them both since day one! Our oven went out Christmas and couldnt get service on it and we were entertaining for Christmas. DONT EVER BUY A WHIRLPOOL PRODUCT!!! If you do you have no one to blame but yourself.

I am so unhappy with your product. Constantly have to restart machine. Never had a problem with my other washer. Takes forever to do laundry. Hate it.

We have had this washer for a little over three years. We are a family of 2 so it gets only light use. The agitator stopped working and the repair was going to be $370! The repair person suggested we contact the manufacturer but they refused to even pay a portion of the repair. Goodbye Whirlpool! And yes, it left white streaks on our clothes as well.

I thought the Calypso had issues until I got the Cabrio. It does not use enough water to get the clothes clean, it leaves them in a tangled mess, and no matter how carefully I load the clothes it is always off-balance making enough noise to wake the dead!

So far this washing machine has been perfect. Its a top load not front load which I prefer. Im not a big fan of how it locks and I cant throw other stuff in once it started. Other than that Im very satisfied.

We purchased a Whirlpool Accubake Drop-in Stove (Model # RS675PXG015) on 10/21/2006 from Lowes Companies, which cost $1,100.00. In 11/2012, we had an error message E1-F2, and we tried everything to get it to clear - all suggestions given by electrical repairman who does repair for Lowes Cos. The stove is porcelain, which also has problems of staining that cant be cleaned. We were told the repair would cost $200 for the panel, and if that doesnt work, another $400 for the other panel. In reviewing other complaints for this Whirlpool stove, there are enough complaints to recall this item or at least give deep cuts for the parts to repair this stove. We have purchased other Whirlpool items, and this one is not well made and too costly to repair. It should last at least 15 years or more. Cant Whirlpool do something about this obvious problem?

I have purchased Whirlpool refrigerator 2 years back. Suddenly my refrigerator stop working. When I filled complaint against this in customer service care. They sent technician. He told its compressor not working and asked 2800 rs for gas filling. Then he said hell come tomorrow for this. For 4 days he didnt come. After 20 calls, to customer service centre they said, Your refrigerator has to sent to the center. For that they asked 1000 rs... We were so disturbed by their slow service. We immediately said yes. Now when our refrigerator arrived at their center. Now they are again asking for 3400 rs for other part. Im so frustrated by this service. What type of warranty you are giving.. The warranty is of just the box.... So bad products. Such a bad experience... Never gonna buy Whirlpool product again or recommend anyone.

We bought Whirlpool duet front loading washer and matching dryer. In 3 years the water level seemed like it was off. Clothes, especially towels were coming out stinky. Eventually you could hear the clothes were merely flopping around wet. Before we could order the repair part it completely quit and locked our clothes into it. I washed my clothes at my daughters house for a week and dried them at home. Within the week the dryer quit. Not having the money to repair both machines, my son gifted me a set of top loading washer/dryer. Again Whirlpool. In a week we had repair service out. They replaced everything possible and it still didnt work right. Since the 90 days from purchase was approaching we returned it to the store and they had Whirlpool send us a brand new dryer. This one worked for a month then stopped spinning. I havent called for service yet because now with 3 broken machines I am so disgusted. When I think about them I feel like I am going to puke. My washing machine shouldnt be the worst thing in my life, especially since it was a lovely gift from a wonderful son.

Had unit about 4 yrs. No problem with unit, work great. Easy to clean, stand up to every day use, heat dishes and popcorn three level no issues, heat dishes, defrost items, cook food at several levels.

If I could give them zero stars I would. NEVER BUY A WHIRLPOOL GAS WATER HEATER! Our Whirlpool water heater Is 4 years old. Pilot light wont stay lit. A reputable plumber came out and said that the control knob is bad and to call Whirlpool to get part because its still under warranty. So I call and get nothing but a hassle. They tried to tell me that it was installed in a room that the installation manual says it not to be in. (Background here. The house was built in 1960. It is on a cement slab and its a prefab house.) The manual says Do not install in bathrooms, bedrooms or any OCCUPIED room normally kept closed. Now let me tell you where it is at. It is in a 5 by 3 boxed area with cement floor and walls to the ceiling with access doors to it and to the furnace which is also in this area. The access door to water heater is on the back side of a bedroom closet, access door to furnace is in a hall. So Whirlpool tells me that they cant give me the part Even if I pay for it due to some national fuel and gas code. They wont even tell me where I could buy the part... They said the only way they can help me is if I relocate the water heater or put in a ventless water heater. Our water heater is vented thru the roof of house... It gets plenty of ventilation. They wouldnt let me talk to a supervisor to complain... So this is why I am on here writing this review. I might add this is not our first issue with Whirlpool. Had a brand new KitchenAid refrigerator with ice maker. The ice maker didnt work from first day. After 3 techs and 3 visits it still doesnt work. Then also the compressor went out. If you want a better product and want good customer service then dont buy Whirlpool.Oh and one more thing. Our plumber also doesnt like Whirlpool. He said he had problems every time when he has to deal with them. He said its to the point when someone calls for services and tells him its a Whirlpool he just cringes. Now thats pretty bad. I just spent 4 almost 5 hours of my morning upset to the point of tears. With no results. Another note. I called my gas company. They said our water heater is in a safe place. If it wasnt they wouldnt be supplying gas to us. Live and learn. Done with Whirlpool.

I bought my new Whirlpool Duet washer and dryer in November 2011. Washer was loud from day one, but I never owned a front loader and thought that is how it was. Then someone told me that meant the bearings were bad, so I called. While still under warranty, they did replace; and I had to wait 6 weeks. Then a few months later, it started leaking. I had the extended warranty, and A & E came out and told me the bearings failed again. And now, I get a check for $750. But the machine cost more than that. Do not buy any Whirlpool, Maytag, or Kenmore. They are all made by Whirlpool.

We bought the WDF330PAHB1 Whirlpool Dishwasher from Lowes last year. It is a terrible dishwasher. It does not wash or dry the plastic dishes well and has a continued foul spoiled milk smell despite many cleanings with dishwasher cleaning tablets. I use Cascade and Finish rinse aid. My china and glassware are fine and it is a quiet unit but this gook I have to keep cleaning up is gross. I clean the removable filter and screen 2-3x a week but the stuff gets on and in every place it can cling to. Its a greasy, smelly muck. Its in both water jets, so I have to constantly remove them and bang the stuff out. We pre-rinse our dishes (which Ive never had to do before) but still this slime keeps building up. Do not buy this machine. I wish I could give mine back!

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

Ive had other brands of washers and dryers and I must say I always return to Whirlpool. They are well made and do what they are supposed to. Never had problems. My last set of Whirlpool was about 12 years old. Great product.

My mother and grandmother swore by Whirlpool washers. They were the best. So, naturally I never wanted any other brand - then came the digital machines. End of an era. My experience with my 1 year old digital machine has been very frustrating. I do not like it. I prefer the old system.

Because the lid was not thoroughly covered, painted and sealed, it began to rust within first year. When I contacted Whirlpool about this - they were not only rude, but will not support quality issues with their products. They basically said they did not care and even acted like a consumer should expect such things! Actually said because its subjected to high moisture levels. WRONG, I do NOT just expect rust. It only formed due to poor quality paint job and was not cured correctly. My Kenmore washer and dryer both, were 25 years old and had zero rust and still functioned when I replaced them with these Whirlpool. Its frustrating that there are no quality, American made products anymore.

We bought this refrigerator because it was the only panel ready one we could find. When it was delivered the two doors did not line up. There was an adjustment that could be made but it required that Whirlpool had to do it. We made an appointment and was told it would cost $179 for the adjustment!! This for a refrigerator we had just purchased for several thousand dollars. The service person showed up and after working on the refrigerator he could not balance the doors. He blamed it on uneven floor, misaligned cabinets – anything he could say to shift the blame from Whirlpool. We called and complained again. They sent out another service person. He was just as useless as the first one. Told us to even out the doors we would need to shim the refrigerator which he would not do. Complained to Whirlpool with no results. Finally hired someone not affiliated with Whirlpool who was able to get the doors to be aligned. Never Never buy a Whirlpool/Kitchen Aid Appliance. They do not stand behind their products and do not care about their customers!!

This was the first new appliance that I had actually ever had and I purchased it in October of 2010. After four months, it started make a grinding sound. I called Whirlpool and the repair man replaced the motor. Approximately four months after that, the lid got stuck and the machine would not respond. Same routine as before, but this time the transmission was replaced. While the machine was apart, I noticed the white insulating panel from the bottom was brown in a spot and looked as if it had gotten hot. A month before the 1 year warranty expired, the washer started making an intermittent grinding sound nearly identical to the sound made when the motor went out. This time a different service company was sent out my Whirlpool and the said that nothing was wrong. Now, the machine is out of warranty and has stopped cleaning close and during the spin cycle the you can hear water running into the machine constantly. Last months water bill shows a 40% increase in water consumption when nothing has changed to incur a larger bill. Seeing all these comments makes me wonder why the heck nothing is being done to force recalls on such poor products. Consumers should be treated with a lot more respect than this. I will never recommend a Whirlpool product to anyone I meet. In fact, I will strongly discourage anyone who is contemplating buying a Whirlpool washer machine.

I purchased a Whirlpool Cabrio washer and dryer from a local appliance center. Everything was working great. After some time, the washer began to have error codes. I would have to turn it off and restart using more detergent, more water and more electricity to attempt to get a load washed. I did purchase an extended warranty. I reported the issue to Whirlpool and I have had 7 home repair visits while still under Whirlpools warranty. The first time, the repair tech went under the washer and tightened a screw. REALLY! The next visit, the motherboard was changed and the issues kept coming back. Well, the Whirlpool warranty was now over so the extended warranty had to be picked up from the appliance center. Things got worse and had continued repair calls. After I had enough, I called Whirlpool and spoke to everyone under the sun. I tossed it outside and bought another brand washer. Several weeks went by and this washer still under the shed, Whirlpool contacted me and bought back my washer, GREAT.Now, here it starts all over again with the dryer, same issues with motherboard. Only this time, I am 1 month out of Whirlpool warranty and need $385 for a new motherboard plus cost to replace. I call Whirlpool again but only this time, they show no issues with this dryer and are not budging. I toss it out and again, purchase another brand dryer. I grew more angry by the day looking at this dryer sitting useless outside. I had it hauled off as trash. My question is how does a consumer protect themselves against these manufacturers? I do understand warranties but if it smells like a lemon, acts like a lemon, it must be a lemon!

Bought a stainless steel Whirlpool Gold bottom freezer in 2011. I purchased an extended warranty from Lowes (4) years, and still have another year left on it. Im constantly having to mop up puddles that form under the right front of the refrigerator. I read someone elses review with the same issue along with a sheet of ice forming in the bottom of the freezer and having to chip it out so the freezer drawer will close! Im calling the warranty company today.

I just purchased a brand new home. I have an electric wall oven with the microwave over the oven. They are both built into the wall. Can anyone tell me why a massive amount of steam is coming out. It is really bad it makes my microwave glass so bad I can see through it. It is also making my cabinets so wet I have to use a towel to dry them. Plus I got a steam burn. Can someone tell me if this is normal.

We built a new house less than 2 years ago that included maple hardwood floors and upgraded Whirlpool appliances. The ice maker jams frequently, fresh vegetables freeze despite raising the temperature to 45 degrees and 2 service calls that didnt fix this. The latest problem is the worst. Ice built up in the bottom of the refrigerator and leaked out destroying our solid maple flooring. They are coming out again to service the problem, but who is going to pay for our swollen cupped floors?

I called Whirlpool about the refrigerator that I purchased in June of this year and nothing was done about it. My situation is that the refrigerator scratches very easily. It seems that it gets scratch only by looking at it. This refrigerator is very expensive and I not even done paying for it and this appliance looks awful!! Susan the person that I was chatting with just told me that cosmetic doesnt cover and there is nothing that Whirlpool can do about. It bothers me that paying so much money for something that it is poor quality material.

On Aug. of 2013, purchased A Whirlpool refrigerator with ex warranty to find out the bottom freezer door started to RUST!!!! They said it was not covered????? WHY!!!!

Oh what a tangled mess you weave! Inappropriate water usage and bad agitator. The brain is not flexible. Most of all it locks me into a contract of this is it, do or die, you have no other options but to start again. It puts my clothes in abused mode! I say no more, taxes will bring me to buy your competitor. It is very large and way too heavy to move anywhere. No!!! I will never buy another. To the point with all required letters involved, No I will not recommend this (Cabrio washing machine) to anyone, or give it to a friend!

I purchased our brand new double ovens on 9/27/11. I was happy until 11/3/11 when the inside glass exploded, shooting shards of it all over our kitchen during the self-cleaning cycle. I immediately called Kitchen Aides corporate office in Michigan. She said that she could send a technician out to access the damages but didnt see that this was a product issue. Like I dont know how to properly push buttons to self clean! The technician came out the next day and said that he was only authorized to replace the glass, nothing else. He couldnt tell me why it shattered, he thought perhaps there was a bubble in the glass during manufacturing. I said I think it needs a whole new door at the very least, but more likely a new unit. I just paid $3000 for what will be a refurbished oven after one month of use. Today, I called once again to tell them that I am not satisfied with new glass, not to mention my oven is unusable in its current state and still has glass sipping out. I spoke to a woman in their safety committee department, who told me that Whirlpools warranty is replacement of broken parts, nothing more, and since only one pane of glass broke and not the door physically, they couldnt authorize a new door or new oven. Mind you, that we still dont know why it broke, was it just faulty glass or could it be a heating problem? She didnt care, only that they could only repair the glass. I asked if the glass could be overnighted since I have been without an oven for four days now. She said that she had no way of doing that, so I asked if I could speak to the parts department and she said I could not, that only techs could contact them. I asked if she could do anything for me? Could she assure me that it would be fixed within the week? No. Could she assure me that it would be fixed by Thanksgiving? No. Whirlpools policy clearly is that once you purchase their products, they have no intentions of listening to their customers complaints or concerns only to do the very minimum required.

Purchased Whirlpool gas hot water heater from LOWES on 9/25/2016. After the installation, tried to light the pilot light for 90 minutes. Followed the recommended instructions, I could not get it to light. Called LOWES they told me to call Whirlpool. I did so, and told them I will return the heater to LOWES the next day. Whirlpool customer service very bad. Returned the heater to LOWES the next morning, went to a local plumbing shop and purchased a Rheem heater. After installation it lit very first attempt. Now three weeks later I get a letter in mail from collection agency that LOWES turned me in for stopping payment on the check I wrote them. After reading the many negative reviews and they disregard for my and my familys safety, nobody should purchase a Whirlpool gas heater from LOWES.

Best microwave for your money. It is very quiet and easy to use. This microwave is very sharp looking and comes with all the bells and whistles that you need. I like the potato setting. You put your potatoes in and it will ask you some stuff and you press the button.

I purchased a Cabrio high efficiency washer in 2011 and have had the glass top lid crack twice. The hinge is rusted, shedding rust all over the corner of the washer. It is a design flaw, for I see others have had the same problem with this particular year. I have also looked at the newer versions of the Cabrio and the lids have been redesigned. This lid should be recalled and replaced with a newer version, because this lid will always rust and crack with use.

Worst appliance of any kind that I have ever used. Has only on/off button, in effect. Wastes water. There is no option to change anything once cycle has begun. No soaking. Occasionally, the machine simply decides to stop and drain itself so that you can start all over again!! No idea how long cycle is. Nearly done? No idea. No matter what temp or how much detergent or how much water, the clothes are not clean. The lid locks and so there is no way to know whats going on. I suspect there is very little water during rinse cycle. All of the whirlpool appliances are similarly horrible. Washer is the WORST. Shame on you Made in America.

Im on Whirlpool Cabrio washer top number 4. Well over $300.00 each, and washer doesnt work with a broken top. I sent a letter to Whirlpool telling them, NEVER again Whirlpool and my reason is the 4th top in 6 years. I received a form letter back... apologizing for a delay in response and, we hope you enjoy the rest of your day, lol. They dont get my level of dissatisfaction or better just dont care. Never again Whirlpool.If you search Cabrio Washer tops you can see thousands of dissatisfied customers... and still Whirlpool has the arrogance to say, occasionally failures do occur, but we can not explain. Really is your engineering that bad? A high school kid could figure out that the spring is to strong for the plastic housing and over time the plastic cracks. Really Whirlpool? A multi billion dollar company? Never again Whirlpool.

We our adding our name to a list that is remarkably long. We purchased a top loading Cabrio washing machine just over a year ago and the problems with the balancing of the unit are the same as everyone else who has written in. The service company A&E has promised a lot but has done little to resolve the issues we have had with the machine. One representative told us that she would order the part and have it sent to our home. When the part did not arrive, we called A&E back only to find out it was never ordered because the service technician would not return their phone calls. I find this excuse ridiculous and similar to other false statements they have given us on the other four phone calls made to address the problem. After reading these reviews, we realize that this is only the beginning of what will be a frustrating and costly experience. Never again will we buy a Whirlpool!

This dishwasher is poorly constructed. I cannot use it now, as the top racks assemblies have both fallen apart and the rack will not hang. The bottom rack is functioning on 1 wheel assembly out of four. And the one that is functioning is a new one I put on it three weeks ago. The dishwasher is 2 years old. I am very disappointed in Whirlpool, and I will certainly not purchase another one when I buy a new dishwasher.

My mother has had this stove (Whirlpool Accubake) about 3 years. She does little cooking. On June 24, 2015, herself clean activated, probably for a few days, this is normally 850 degrees. She is 84, does nothing with this stove, certainly not knowing how to hit the clean button and HOLD the Start button for 3 seconds... this caused the stove to billow smoke out of the oven and encompass her entire home. No fire, but was caught in time. The fire department had to pry open the door as it would not unlock.

I have many rentals, and for over 39 years have always bought Whirlpool dishwashers for them and my own home. I have noticed over the last 15 years or so they are getting more and more poorly made. First I quit buying the plastic tub ones because they collected mold on the back. Then putting one in a rental, we went through 3 brand new ones that all leaked before we got a good one. Now, I bought the very best for my home 2 years ago, had the pump replaced under warranty due to leaks. Now, the plastic upper rack wheel has snapped off its plastic base. For under 30 dollars you get a replacement kit for it, that is all metal. So why didnt Whirlpool just put in the metal ones and charge a little more. So this will be my last Whirlpool, and all the brands they make. Do your research, many of the name brands you know are all made by Whirlpool.

Purchased a matching set, Whirlpool Cabrio Platinum Washing Machine and Dryer in November of 2012. After just over 2 years, Im stuck replacing the Washing Machine at my expense! The washing machine began leaking water out of the bottom of the unit and became extremely loud when operating it. The repair technician said it was a seal and bearing that needed replaced and the cost of repairing the unit would be cost prohibitive versus replacing the unit all together ($800+)! Originally paid over 2K to purchase these units and have them installed. I do not want to trust or rely on the Whirlpool brand again. I would appreciate any recommendation for a better quality, high capacity, HE washing machine brand to replace the Whirlpool unit with (Samsung, GE, LG)??

Washer keeps saying F1 and it wont spin. In the middle of load it will stop and it would say F1... It started just a year when we bought it. Now its two years. Its really broke. Before it would say F1 then I give an hour then try again and it works but now no matter what I do it really wont work... I dont know no one who could help me whats this F1... So sad. Its not cheap washer but its junk.

Im 70 years old and always bought Whirlpool washing machines. My last one I bought at Lowes and it is the most Ive ever paid for a washer and its the worst Ive ever owned! Dont waste your money! Hard to get clothes balanced and it slams and bams like the old 1970 washing machines! Horrible!!!

Whirlpool Refrigerator: Model # WRT111SFDW - We bought this frost-free frig. in Feb of 2016 and this Feb. before the year was up, it started freezing up. I called the Co. and they sent a young man to my house to fix it and he thought he had. Well 2 wks after that it started freezing again and I called the Co. again and the same thing happened again and this was after my warranty had expired. Well then this young man came out and replaced the fan and a heating rod I believe to help it to stop freezing. Well 2 days ago it started freezing up once again. Im disabled and live on a fix income so now Ive got to figure out to get me another frig. And it WILL NOT BE A WHIRLPOOL REFRIGERATOR. But kudos to the Co. and the young man for trying to fix it even though it took 3XS and still not working.

Purchased this machine in Jan 2012. From the start, dark clothes came out with white streaks on them. Thought I was doing something wrong - kept using machine. Then started noticing my whites coming out looking very dingy, light tan stains on them. Called Whirlpool and was told to use Affresh tablets to CLEAN my washer - why should you have to clean a washing machine?Several weeks ago noticed machine getting very loud during spin cycles - and I mean loud! Sounds like a jet engine taking off in my basement. Called repairman - he listened to my machine and said noise is the bearings, seal not fitting properly around bearings and the grease for bearings is slowly leaking out into my wash cycles. Explains the dingy whites and spots on darks. Said he just worked on a Cabrio with same issue - had to rebuild seal and bearings - about a $450 job. After reading all these reviews, decided not to attempt to fix this machine. Going to scrap it and start over. $900 for 3 yrs of an inadequate washing machine!! Whirlpool should be made accountable for this inadequate product to all of us consumers who threw away hard-earned money. Reading up on the Speed Queen agitator model. Lots of good reviews. Think I will go back to the old tried and true way of washing clothes.

My machine has been ripping clothes for a few years but I thought, initially, that it was a snap, zipper or hook causing the problem. I recently got fed up and found this: **. It makes it pretty clear that it is a manufacturing defect. I called their customer service centre and spoke to a supervisor that told me it is normal wear and tear and that perhaps the glass in the door had worn out. Yes, thats right, she said maybe the glass has worn out.They are offering ZERO assistance in what would be a $500+ repair for me. Admittedly, my machine is five years old and out of warranty, but to me, when the repair is to install an entirely new style of door so that the clothes no longer get caught underneath, it is a defect. 43 different models of their machines are included in this issue and it was identified in 2012, a year before my machine was made. Why didnt they correct it before that?

Purchased WP fridge, stove, and dishwasher at the same time. All were the gold series. At 20 months, freezer stopped cooling. WP would not cover the repair. Refrigerator has been noisy from day one. This company does not care about their customers.

I bought a fridge from Sears located in King of Prussia, PA on February 1, 2011 model ED5LHAXWB02. The fridge was leaking from the water dispenser the day it was installed. The technician said it was normal and it will stop in 2 to 3 days. The leaking never stopped, multiple attempts has not solved the problem and the fridge has never stopped leaking. We have to keep towels under the water dispenser to prevent damage to our kitchen wood. Despite the problem existing from day one of delivery, a replacement or refund has been declined to us. Sears technical assistance was not able to remedy the problem, after a series of missed appointments. Sears technical service attempted to fix the problem without success and has not suggested any further solution. Sears technical service claimed that they have been in contact with Whirlpool. During the warranty period, we asked for a replacement or a refund. Nothing has been done. Whirlpool just provides lemons to their customers.

I bought a new Whirlpool fridge that has been a piece of junk since the day I bought it. The minute the warranty expired. The thing broke down. The corporate service center was a joke. 15 min wait time just to get through. Then a runaround of misinformed referral numbers. Minimum charge $200/30 min just to have a service rep even look at it. And then $100/hour + parts after that. Highway robbery. My doctor doesn’t even charge me that much. I will never buy a piece of junk WP product ever again. Their customer service is rude and non-existent. The company does not stand behind its products. Don’t buy!

Purchased this 27 cubic ft French door bottom freezer fridge (WRF757SDEM01) in Sep 2016. Approximately 8 months after, fridge stopped cooling. Called Whirlpool for service diagnosis since fridge was still under warranty. Service tech stated coils were freezing over due to part malfunction and part needed to be replaced and ordered. He provided me with a temporary fix by defrosting all the ice from the coils since the part would take approximately two weeks to come in. I spent an entire day of annual leave from my place of employment for this service call!!! New part was replaced and fridge was cooling like it was supposed to.Here again six months after the part replacement, my fridge was doing the same thing again; NOT COOLING my food AND there was this awful noise coming from the area in which the part was replaced. That drove me CRAZY to the point I would turn it off in short increments to maintain my sanity. I called whirlpool AGAIN, and this time, my fridge is NOW out of warranty, BUT, the replacement part of five months prior should still be in warranty. My fridge failed the day after Thanksgiving and five days after the fact, the service tech will be at my house again.Worst part of this is I took an entire day off work expecting the service tech to come between 8-12 as told to me by the whirlpool customer service rep and guess what? The company called at 1000 and said they only do appointments in my area in the evenings. I was furious; again another day of employment missed at the hands of Whirlpool. I am not confident that the same part that was replaced in May is defective and I may be going through spouts of an inoperable fridge again and again. Whirlpool really needs to take a hard look at recalling these fridges OR providing quality appliances for the money that we pay. I had GE appliances in my old house and NEVER had issues with the refrigerator. My new builder choose whirlpool and made the wrong choice! I just want a refrigerator that will work operate for the $2100.00 that I paid. I will NEVER recommend whirlpool appliances to anyone... Never!!!

I purchased a washer from Whirlpool through Home Depot on August 7, 2014 and on Dec 31st, 2014 the washer broke. I called Home Depot and was told to call Whirlpool since I was still under a year warranty. After numerous calls I was referred to Advantage |Appliances, a company that provides repair services for Whirlpool. After a week the technician showed up and briefly inspects the machine to conclude that there were two problems with the machine: The controller is defective and there might be another problem since the water is not draining. An order was placed for the part and another week went by with still no part. I called the corporate office only to hear that it might take 5 to 7 days to receive it. In the meantime I had laundry piling up. I was forced to go to the laundromat with one arm in a cast and a painful lower back. I finally received the part on Friday and the technician arrived on Saturday to install the part and then announces that she was willing to fix the water pump but had to get paid in cash since this was not included in the warranty. Now mind you! This woman knew about the problem from her last visit but made believe that it wasnt a problem. Advantage Appliance makes money by extorting their customers out of money. This young lady stood there without blinking asking me to pay her $89.50 to do the job she was suppose to do in the first place. I purchased an extended warranty from Home Depot only to find out that they would not be able to do anything since I was still under warranty. I have never been so angry and want Whirlpool to take responsibility. I am sitting with a washer half full with water and no one is stepping up to do something! Whirlpool is disgusting! The corporate office was not friendly or nice about this situation. They dont care! Why do businesses like Whirlpool get away with this? This is not acceptable.

I have a Whirlpool stove. Theres nothing but problems with the oven sensor. This is the 3rd time we have to replace it. It had problems ever since I bought and thats been 11 years ago. My Magic Chef lasted 13 years with no problems. I have a Whirlpool microwave that had a recall on it. Never buy Whirlpool!

Three years ago, 2008 we purchased a Whirlpool Gold refrigerator for our new house. Since we have had trouble with the ice maker and dispenser, we have had it repaired twice, the latest on Nov 31, 2011. We thought that perhaps it was only our problem. This past summer, we, along with some friends, rented a house in Water Color, Florida for a week. The house cost over $2M to construct and evidently they chose the same refrigerator we did, and guess what? They have the same problem. Just this week we were visiting some friends in Starkville, Mississippi and they had the same refrigerator with the same problems. Evidently this is a design problem and a poor one at that. I would neither buy another Whirlpool product nor would I recommend Whirlpool to anyone. I thought we were getting a quality product given the purchase price of this refrigerator. Indeed that is not the case.

This started Sept 27 2017 when the ordered online electric range 30 inch slide in oven Whirlpool brand was delivered. When using the oven, a noxious diesel smell filled my home, despite multiple attempts to burn in the unit as advised. 10 days later after still trying to burn it in fumes got worse. I called corp who then sent over a tech to look at it and the tech shared with me when he arrived that he was the wrong person since he cant smell due to an old injury! He admitted he smelled a chemical when it first went on but it went away for him but might have went away due to is impaired smelling ability. I called Corp back and they totally agreed something was wrong with it that could not be repaired and the unit should be picked up and I should be paid back that day it is picked up. They said in a few days which later turned in 2-3 weeks out and counting... I filed a complaint with the BBB due to the ongoing issues. Corp office said they would pick up unit and at that time hand deliver me my refund in full. At first the pick up was weeks out but after BBB was notified they came yesterday 10/18/17 and removed unit, but no check! I called Corp again this time asking why I did not get my money as they promised she said someone dropped the ball, and that someone should have told me that since they had to get someone non-local to get it that they will mail me the check in 14-21 days! She said I see in the notes. They told you they would hand deliver you your refund so they should have called you about the change.So here I sit... No oven in use since Sept 18 and no money back to buy one for weeks yet. I have never been told, despite my requests as to what the chemical was that I was burning off in my home and exposed my family to over 10 days which we had headaches and nausea from (despite windows opened and fans going at full blast). Only that it might have come from the manufacturer or process. This company isnt the only one who has had issues on occasion with a defect in this never-ending chemical smell but the lack of regard of my safety concerns and failure to stand up to what they offered to do (poorly handled response) is simply wrong and bad business. I have not dealt with Whirlpool regarding matters ever and have very little of their products in my home so unsure if this is unique or standard with them. I wont buy their products anymore because I am less than very dissatisfied with my experience. I may have been the only unlucky person having this kind of response from this company but felt the need to share.

This product is just DISAPPOINTING. The gas knobs got stuck TWICE IN 13 months only! The range is NEW! The first time 3 out of the 4 knobs broke, this time only one. It would not turn off, so we are forced to climb on the counter and turn the gas off every time we are finished cooking and turn it on again. The company wont be able to send us anybody till next week, which will force us to go on like this for NINE days plus, of course, the time it will take to order the parts needed.There is not even a back up emergency service, which should be in place since we are dealing with GAS! I have heard complaints about this product in this area: in my opinion the range should be recalled. Of course, the representatives one talks to are all trained to keep calm and reply the usual things: Oh, I am sorry etc. but the bottom line is that neither the product nor the customer service are good (the first customer service person was not very friendly either). I highly recommend that you AVOID this range if you are considering buying a gas one with double oven.

My Whirlpool refrigerator model #ED5FHEXV001, serial #HR0248 - I have spoken to a couple of reps on the phone. I am very dissatisfied because it was like one rep I spoke with on the telephone advised me to buy an extended warranty and at that time, the company would consider alternative ways to deal with this complaint and perhaps replace the refrigerator. I did not want to pay an additional $100 for a warranty, unless the company would guarantee me a solution, preferably my money back. I did not really believe the warranty would help me after the warranty was expired. I would still have the same problem and I feel that in the event after the extra warranty expired, the company would tell me I should have kept the coils clean, which is my complaint. There is no way to keep the coils clean. I guess blowing out the residue, then all that residue material would end up all in my house. Also, very important, there have been 3-4 technicians to my house the first year. I was told various things to do, such as adjust the refrigerator to a lower setting and freezer to a little higher setting. One tech actually replaced a part? The second tech said he would clean the coils. The last tech told me the problem was my coils had to stay clean. My question is, how the heck is that possible with the coils on the bottom of the fridge and susceptible to a lot of dust and dirt, unless I move my fridge everyday? Most people do not expect to have to clean under the fridge each day and the coils would still be dirty anyway. It is very dumb that the coils are not on the back of the fridge. With the fridge coils on the back, I have never experienced this problem. Please advise what my next step would be. Thank you.

About five years ago, I purchased a top load Whirlpool Cabrio washer and matching dryer. For the past couple of years or so, this washer gets out of balance every spin cycle. It sounds like a mac truck running through my house. At this time, I do not have $300-$400 to buy a warranty when I feel that this problem is so widespread (via internet complaints) that Whirlpool should fix this problem. I replaced a perfectly working 13-year old Maytag washer simply because my dryer went out. I have contacted customer service with no results. I recommended this washer to my neighbor about a couple of years ago and now I am sorry I did. Little did I know that three years in there would have to be a repair. As you know, this isnt a bottom of the line cheap washer, therefore, I wouldnt expect it would be acting like one after this period of time. I asked Dave who at Whirlpool cared and basically, he had no answer. I told him that I would expect a company as large as Whirlpool to have people who have the job of searching the internet to see what people are saying about the company and if they did, they would know this was a problem with these washers and would initiate some sort of recall. This is such a bone of contention at my house that I wish the thing would just die so I had to go buy another (and trust me it wont be a Whirlpool). But rather, I get to listen to my washer thrust throughout my house every load I do.

I purchased a washer and dryer set, the Cabrio Platinum Series WTW8500BRO, about 3 years ago. I had a UL code come up a year ago and the machine was serviced and all was back to normal. Then only 9 months later it started acting up again. This time it sounds like an airplane taking off and there is a black spatter leaking from underneath, also the lid lock stopped engaging. I started to look up the error code for the lid lock and while reviewing that issue it was an easy fix, however, the noise and black spatter issue led me to tons of horrible reviews about this product. It is a bearing/tub/shaft issue that is going to cost me $500 to fix. First off I did not pay cash for this set, I rented it for 3 years and paid twice what it’s worth, around $4,000. Stupid on my part but I couldn’t afford it the other way. Weekly payments were easier. Now I am scared to fix this product because of all the reviews I’ve seen from other consumers. I haven’t had the other issues like dirty clothes, not enough water, high cycle times because they all start with a high number but after it configured the load the time shrinks, but this major issue about the bearings, they say I have to replace the entire tub assembly which is half the cost of the unit. So stupid and I cannot believe Whirlpool is getting away with this crap. Please please please inform me about any lawsuits. I will gladly participate in that. They should be held accountable for such a worthless piece of junk. Like I said I am now afraid to fix this machine because from what I’m reading, more than likely it will only last a short time.

I bought a Whirlpool Cabrio Top Load washing machine September of 2012. It has never cleaned the clothes well. For the last month the machine has a very loud spin cycle. I am very unhappy with this purchase and it is 2 months out of warranty. I emailed WHIRLPOOL and was told that all appliances have problems and wear out. WOW! It is 14 months old and has been used with care. I will never buy another Whirlpool product.

I am so frustrated with my Whirlpool Gold Wall oven with Accubake system. It has been on for 12 hours in clean mode. The door is locked. My home is full of smoke and even though I turned off the breaker so no power would go to it, it is still locked and hot two hours later. This is the second time this has happened. Not only is it a fire hazard, my walls are hot to the touch. It is frustrating. There is no override of the clean mode. BTW, I was baking when the inside light switched on and off and the door locked down. I was nowhere near it and it was the second batch I was baking so I did not touch the clean button. It did it itself.

Defective Product: I had to replace the fan motor on my refrigerator, which is barely 3 years old. I contacted the company and they told me it was out of warranty. I asked the repair person if he see this problem a lot and he said no. I have had other Whirlpool products which lasted for decades.

We bought the Whirlpool top loader washer and the drum broke down and after several attempted fixes it was replaced by new one as we were being financed through a business. So here comes the new one - same exact washer. Not only did it not clean well (normal soiling) then it goes to ul which means not balanced... not because clothes arent but because the thing that balances - it went only after a yr!! It would also keep filling draining again to no drain leaving clothes SOPPING wet... So very disappointed to say the least. What a piece of junk this washer is!! Its going to the curb tonight and being replaced by GE - NO MORE WHIRLPOOL AGAIN !!

Purchased Cabrio set last year. Worst set I have ever owned! Clothes do not come clean. Takes forever to wash. Must wash multiple times to get clothes clean, even on deep water settings. Does not spin water out of sheets and blankets. Dryer dries unevenly. Waiting on repairman because dryer will not come on.

The beat goes on. My Cabrio washer is still down. After working for a mere 14 months, the control board died, and the machine would not spin out water. The repairman ordered a new one. Though the part arrived several days earlier than predicted, the repair service said they could not send anyone out, until our scheduled appointment. At last, today, the repairman arrived. I am ready to start whittling down the mountains of laundry we have stuffed in every closet. Some areas of my house are starting to smell like a locker room. It is not convenient for us to haul everything to a laundromat, or impose on a relative who lives nearby.The repairman was in the laundry room for at least 45 minutes, and then very apologetically tells us that the part is bad. It will not work at all. He has ordered a new one, and requested rush service, which I think they will ignore. I cant help but think these parts are manufactured somewhere outside the USA. Well, listen to this Whirlpool, I would rather pay $25 more for this part, and have your washing machine work. Dirty laundry might seem unimportant to you. It is not unimportant to us! If you cant do better than this, make something else. I am furious, and will spread this news to everyone I know, and I will report on this situation again.

I was not impressed with the new HE washers but could not find any traditional ones anymore. I bought a Amana and am disgusted that it is only 3 years old and needs to be replaced because of a transmission problem with it not agitating. It costs more to repair than it is worth. As a consumer, I should be given a choice whether I want to upscale or be satisfied with older model features. I will never buy or recommend a Amana HE washer to anyone. My mother also has one, has had it for a year and it is already giving her problems. Shame on you Whirlpool.

I bought a Whirlpool water heater not even 3 years ago, and I am already replacing parts; thermostat,thermocouple, and as of yet, no fix. We contacted Whirlpool, and they said that everything has been tried, and if the thermocouple doesnt fix it, well have to hire a plumber at our expense. Its kinda ridiculous. The water heater that we replaced, had been in the home for almost 17 years.This one didnt even make it to 4.

I called to find out if they could assist me with my dishwasher. It is 1 year and 3 weeks old. The start button will not switch on the machine. The only way they would assist me is if I would pay the full cost of repair because it is 3 weeks out of warranty! There are no other suggestions. I would have met them half way with paying half the bill but I got nothing but Im sorry and we cant help. They dont stand behind their product.

In 2/2007, I purchased a Whirlpool Duet Front Load Washer (GHW9400PW) and have had constant F06 failures. After the repairman debrided the pump, he felt the issue might be electrical, if not resolved, it will fail again. Now, it needs a $400 to $500 electrical system and cannot be guaranteed that will end failures as these washers have had many problems. It cost $1000 and only lasted 4 years before the failures appeared. Whirlpool only offers a one-year warranty, which is not enough to cover the future problems these machines are prone to developing.

Less than 2 years after we purchased our whirlpool dishwasher, the rack started to rust. Now the tines are so soft they fall off. The last time we bought a dishwasher the Same thing happened, but after 15 years! They dont even have an option for that to be under warranty so it tells me they dont stand by their product. I will never buy whirlpool again.

I purchased this washer about 3 years ago to replace a dishwasher which lasted 20 years. Within a year the racks began to rot, the front panel plastic started to peel off. Within two years half of the racks rods completely rotted away. 3 years later the washer is busted - most likely pump which was probably blocked by one of the pieces of the rack rods. I am replacing it with Bosch - German engineering. Needless to say I will NEVER buy a Whirlpool - formerly reputable company again. Good-riddance Whirlpool.

I purchased the Whirlpool Gold series cook top range-stainless steel. It is of good quality and looks very nice. It is also easy to clean and for the price it has a self cleaning oven. I didnt think that I would like this range but over a period of time I truly love cooking on it.

Whirlpool 70328 215 IMFRESH ROY 5S purchased on 14th Feb. 2016. It has stopped cooling on 11th April 2016. Complaint lodged on 12 April. No serviceman attended and not connecting toll-free number. Never, never go for a Whirlpool refrigerator.

I just purchased a new Whirlpool 6th Sense hot water tank #333570. This unit is a piece of garbage. Whirlpool should be ashamed at the quality of product they make. This unit came with a bent temperature and pressure relief valve, which required a piece of copper tubing to be bent awkwardly just to remedy the situation. Also, the control box is set at 12 (most other brands are 14, which is common), forcing the gas lines to be re-piped (very expensive). This unit also is extremely noisy, runs really, really hot and is not energy-efficient at all. Shame on me for not researching this product more closely. If youre buying a new hot water tank, steer clear of Whirlpool products.

I purchased a Whirlpool fridge (model GX2SHBXVQOO) on November 27, 2010 and it leaks water on my floor. I have to keep a towel there or it runs all over. I also purchased a Whirlpool range (model YGFE461LVQ) and the convection fan went on it a month after we bought it. The manufactures warranty does not allow repair people to travel any further than 100 km to repair, something that we had to take the stove in to be repaired. We got the stove back the same day and brought it home. Low and behold, after a short period of time it started to rattle again and got steadily worse. Also, now my one burner on high does not stay on high; it keeps going out then coming back on.I have called the place we purchased these pieces of junk from and they said there is nothing they can do. I also sent e-mails to Whirlpool and they said they will look into it and get back to me. That was months ago. I called Whirlpool and was basically told that there was nothing they can do, that I was to call the repairman. Never, never, ever buy a Whirlpool product.

We bought our Whirlpool Cabrio washing machine and dryer in October 2010 and it was the worst purchase we have ever made. We had two worthless calls to Whirlpool and all the regular brain-dead suggestions that do not improve function. We have had a technician out to our home and we have the extended warranty. The technician stated that the machine will never function properly and Whirlpool knows this. The low water level prevents washing, rinsing. The problems with the washing machine are many and the required multiple washes and rinses make the claim for low energy usage false advertising.It leaves white streaks on dark clothes constantly and has residue on everything from sheets to silks, no matter the cycle. Theres not enough water which covers the clothes, so clothes do not get clean. The spin cycle is so violent that clothes are damaged. The soak cycle is a joke. Soaking means to sit in water and soak. This machine drains the water so there is no soaking. With this very expensive machine, we can use only one cycle; bulky items on the low spin with a repeat rinse. According to the technician, these complaints are what they respond to all day, everyday. There is no mechanical fix for this design flawed machine. If you are looking at buying this machine, dont! The machine has ruined lots of laundry. Do not waste your money or your time. I would like my money back. The Whirlpool company definitely plays dumb on the customer service calls. Its a non-functional washer as it damages laundry and has false claim for low energy usage.

I purchased my Whirlpool refrigerator last Summer and so far I’ve had no issues, no probs! I love the energy efficient refrigerator along with its easy settings and options to use a ice maker. Wouldn’t trade my Whirlpool for any other brand!

I bought a Whirlpool Dryer after reading an excellent review in Consumer Reports, despite it costing more than I wanted to spend. The first thing I noticed was a thump, thump, thump with every rotation of the drum. Then I realized that it took twice as long to dry my laundry as my 45 yr. old GE dryer, which only needed a belt, but which wasnt available anymore. I was disappointed in the Whirlpools performance, but that was only the beginning. One night when the dryer was less than 3 months old, I was in bed for the night and I heard the familiar thump of the dryer running. I went downstairs and could not stop it as it did not respond to anything on the digital control panel. I finally unplugged it. I called Whirlpool and they sent a new control panel, but I had to pay the service man.Not too long after that, the dryer heated up, but the drum would not turn. The serviceman said that it had come off track and he reset it. Shortly after, the door would not stay closed as the clamp that held it shut had fallen inside when I pushed the door closed. I replaced that. Then the drum continued to come disengaged because it was out-of-round. But, of course, the dryer was out of the 90 day warranty period too and a drum replacement would have cost more than the piece of junk was worth. So, I had it put back on for what I told myself would be the last time. Well, it was the last because the control panel went bonkers again and would go on by itself and only ran on one cycle if I plugged it in and unplugged it when it was done. I finally gave up and bought an inexpensive analog GE dryer which I never had any trouble with and dried the clothes in less time with less noise.

We bought a Cabrio washer model #WTW7300DW0 and are very unhappy. The clothes come out of the washer dirty, with chunks of soap, (yes we are using HE detergent) and patches of lint on them. The low water design is a joke. The clothes on the top of the load never get into the water. The lid needed repair from the first day we bought it. We have tried all the water settings and the clothes on the top barely move. Why hasnt Whirlpool figured out that this design is just not working? Our three month old washer is headed out of our house one way or another! Notice we didnt give it any stars!

Purchased a Maytag refrigerator in 2009. Was told Whirlpool bought out Maytag, never had a problem with it ever! Speed up to 2012. Purchased another refrigerator this time a whirlpool. HAVE HAD NOTHING BUT PROBLEMS WITH IT! This is the 3rd or 4th time the veggie/fruit drawer POS plastic track has broken. I purchased the extended warranty after a year and in addition to the above, had a new ice maker replaced, and a part in the freezer as the freezer wasnt freezing. So I called them to replace the drawer plastic track again and they say that its a cosmetic problem and they wont cover it. Are you kidding me??? It holds the drawers in for crying out loud! Also told the repairman that the ice gets clogged in the dispenser and either 1) melts all over the place or 2) comes pouring out when you open the doors. He tells me that its best to just use the ice cubes and not the crushed. Again... ARE YOU KIDDING ME? Thats why I paid so damn much money for this one as I wanted crushed ice! There should be a recall on this appliance. Repairman says all the models with the icemaker on the left side have problems with freezing and when inquired about my lettuce freezing and getting wilted or brown, he says that the humidity buttons are really only for looks and dont have a purpose!!! Believe you me... I will be sharing this on social media of all types to get this resolved. WHIRLPOOL BIGWIGS LISTEN UP! YOUR PRODUCT STINKS!!! Since we were gone on Friday when the call came in that they called it cosmetic on the drawers you bet Ill be giving these extended warranty people a call too tomorrow! Also dont say we have too much in our drawers because theres barely anything in them at all times. Its just used by 2 retirees!

We bought our Whirlpool washer and dryer set through a PX at Fort Hood, Texas. Took it home, plugged it in and... nothing. Called the service desk, and they sent a repairman right away. He replaced the panel and the water intake fuse (I think? It was a fuse that dealt with the water filling) and then we were off and running. I thought, Great! Now I can wash laundry! After about a couple months, the washer would be so stinking loud in the spin cycle, we would plan outside activities ha ha. Fast forward 2 years, the loud sound continues, but Ive not had any problems. Then, Im washing a load of bed sheets, and just happen to walk past the washer while its spinning... I smelled something HOT and BURNING! Sure enough, it was the washer! I hurried and stopped the spin and unplugged the machine. Opened the door to pull out my sheets, and white smoke comes pouring out of the machine. IT NEARLY STARTED A HOUSE FIRE. I was praising God I smelled the problem. Who knows what would have happened. So I call an appliance shop I trust. They send out a guy who tells me I might as well purchase a new machine because the bearing is bad, and the repair is going to cost $600+. Never again, Whirlpool. Never again. You dont endanger my familys safety in exchange for a quick buck on cheap parts. Ridiculous. And, now that I am reading all these reviews on this website about my washer, I am floored. How is there not a class action lawsuit against this company? Mold and fire-hazards are serious infractions, in my opinion.

I am so disappointed in my whirlpool W10431035A gold series dishwasher. I bought this 2 yrs and 2 months ago on black Friday at a lowes. I wanted to have a whirlpool and I thought they were a good brand. It has been a little over 2 years and my dishwasher no longer works. The start button no longer works. It is not even that old and appliances should at least last 4 years. I could understand if the plastic utensil holder or dishwasher rack breaks...fine, you use plastic. But this is an intricate part of the dishwasher....the start button and it does not work. I am so disappointed in whirlpool. It is the start button...how can this break. The only thing I do is press normal cycle and the start button...that is it. How can this machine break so easily. How can whirlpool build and sell such a faulty product. So disappointed.