5 years and 11 months ago I bought a 50 gallon gas, Whirlpool hot water heater with a 6-year warranty from Lowes. The 2007 water heaters were on sale, so I paid $329 for it. Within 6 months, I replaced the gas valve, and a few months after that, the thermo-couple went out and I replace that. Each time I called Whirlpool and got return authorization numbers for the parts, I still ended up paying for the parts plus labor. A year after that, the igniter went out and I had that replaced. Last year (the day before Thanksgiving), the thermo-couple went out again and I had to have that replaced - and it cost me for the part plus the labor - even though I had a return authorization number. I also replaced the water line connections/hoses to the water heater at that time. The customer service rep for Whirlpool told me at that time if I had another problem with the water heater, they would replace it for free - and the warranty was good until Dec 31, 2013 (this year). NOTE: Every plumber that has come out to fix the water heater and replace the parts stated that they see a myriad of problems with Whirlpool water heaters. They said the parts like the thermo-couples, igniters, gas valves, etc are poorly built and they replace them all the time. On Christmas Eve 2013 (two days ago), the water heater started leaking from the top by the valves - and so much pressure had built up in the heater the new water hose connections burst, spewing water all over the heater closet. I called Whirlpool the day after Christmas (today). At first, they told me they would not replace the heater as it was not in warranty and then I told them what I was told by the service rep last year. She finally agreed that my heater is indeed under warranty and gave me a replacement authorization number but she told me my warranty did not cover labor. I called Lowes. At first, they told me I would have to remove the old hot water heater myself and bring it back to the store in order to get my replacement. I am a 59 year old woman and I take care of my brother, a disable veteran. Although I am in good shape and healthy, I dont have anyone to help me get the gas and water disconnected and help me lift it into my Suburban. The man at Lowes agreed to bring out the the replacement heater and pick up the old one at no charge, but I will still have to pay $299 plus the cost of new hoses to have it installed. By the time the replacement one is installed, I will have paid a little over $1200 for a $329 water heater. I could have installed a tankless one for that, but I cannot see spending that kind of money right after Christmas. If I have one issue with this replacement, I will install a tankless water heater - and it will not be made by Whirlpool or any of its affiliates. My recommendation would be to steer clear of Whirlpool and their products.

I can not find parts for 50-gallon Whirlpool hot water heater. The left hand thread thermocouple quit functioning so I have no hot water. I have called every plumbing concern in a 50-mile radius and everyone said that it was some kind of class action suit because you can not replace the part of the thermocouple and that they only make right-hand thread couple now.

We purchased the Cabrio Agi top loading washing machine in 2011 (3 years ago). After 2 years it started leaking from the plastic drum (Bearings?). Luckily we have it in the basement on concrete floor, so there was no damage, just frustration. This was poor purchase on our part. We should have searched for more reviews. The wash time is ridiculous; it is too long, an average of 50 minutes per load. I dont know about how clean the clothes were, I guess they were OK. I didnt notice a smell, or them looking dingy. The Cabrio is a piece of junk if the bearings went out after 2 years?? We just purchased a heavy duty Speed Queen, top loading, agitator washer. My wife loves this, its like the old Maytag we had. They told us they wont be selling these washers after next year. Buy them while you can. The Cabrio is headed to scrap yard.

Less than 1 year ago, I bought a washer and dryer. From the beginning, we have had a water problem and the water only comes cold... no warm water in the normal cycle. They came 6 times to service the machine and they cannot fix it. They said there is nothing is wrong with the machine but it does not wash with warm water in the normal wash cycle. I advise not to buy this product anymore. It is under a warranty so they should fix it or replace it. I am sick and tired of talking to them. They said if we send the service guy then I have to pay for it which is not acceptable because it is under a warranty. If anyone is thinking about buying this product, I advise not to get it and waste money on it.

Whirlpool® Gold® 5.8CuFt Capacity | GAS Stainless - This was not an inexpensive stove. The self cleaning oven function is a total failure. You are not supposed to use oven cleaner on the glass, it now has obscured the view into the oven. The top of the stove is very difficult or impossible to clean. The knobs are a dangerous issue. They will fall off at the slightest touch and the stainless markers around the knob are just a stick on label. The oven temperature is not accurate. The bottom drawer is completely rust spots on the inside. What more can I say. Oh I know. Whirlpool your quality is a disgrace and I want a refund.

I purchased the washer 1.5 years ago. At about 9 months, the latch was in need of replacing. The washer was locked and would not unlock. That was fixed. Fast forward to 1.5 years old and the control board needs replacing. The washer stopped in the midst of a cycle, filled with water. The repairs are over $400 -- nearly the price of a new washer. Ive never had a washer to go out on me. I willingly gave away my previous washer for the purchase of a newer model and did not expect this fiasco. I will recommend against purchasing a Whirlpool washer.

Whirlpool has electronic controls allowing exact temperature settings. It is an excellent range and it has a storage drawer under the oven for storage of pots and pans. It also has sealed burners so no gunk gets under the burners.

Dont know the model but it is a basic smooth top range without self-clean option. Its easy to use. I like that it has a smooth top which is easy to clean. I didnt need to pay for the self-cleaning feature as I use an oven liner and clean it right away if I need to. When we went appliance shopping, we needed to replace all major appliances. We chose Whirlpool as we have had them before and they performed well. Also bundling a group of them allowed us to get a great deal.

We bought this pair, the washer and dryer, not even two months ago. I have not liked it since day 1. My clothes do NOT clean well at all. I had to wash the same load THREE times and still there is dirt on them! Just regular dirt. No oil, grease stains or anything... dirt. I even went and purchased POD detergent to make sure I was using the correct amount of detergent... Came home and washed the load again... DIRTY. Customer service says theyll send out a technician, but if they find nothing wrong, itll cost me... I wish I had read the reviews before I purchase this junk! DO NOT BUY!!!!!

My son bought a Mastermind 250-L refrigerator on 09.09.2009 (invoice no. **) from the Good Morning store in Alleppey (phone no. 0477-23253809). The cooling effect was lost with a loud sound. I requested customer care. Three times, four people came and they gave a receipt of RS 890. After they left, it is in the same condition. I requested so many times, but there’s no reaction. Before I could go for legal proceedings, I would like to make you aware of the conditions prevailing in Kerala in sales and services. The young trainees who dont know to repair have broken down the entire system and it is fully collapsed. The franchise office washed their hands. This will spoil the entire name and fame of the company. Kindly look in to the matter and do the needful immediately.

Bought a commercial coin operated Whirlpool washer on 4-18-2015. As of this date machine has not been used that much, the electronic part has gone haywire.All lights on and shows the door lock (which is not) disconnected, nothing changes when I put it back. Contacted Whirlpool technician, have been told that this is a defective model. He has apparently had several service calls that are new machines and they are all the same issue. Told to contacted Whirlpool, Whirlpool playing dumb. I have several other older Whirlpool commercial washers and dryers, never had issues. I guess they are doing shortcut garbage machines. Also, the interior of machine is less sturdy than the older models. Will not buy any Whirlpool products again. They do not stand by their products try to tell me that they are not aware of defective machines. Cheaper to play stupid!!! Disappointed with their lack of standing by what they sell!!!

In July I purchased a Whirlpool Gold oven and cooktop from Lowe’s. It was delivered in Aug. after a 5 wk wait, since it had to be ordered. Since installation, the hot surface light on the cooktop stays on. I called in & was told to try resetting the elec. breaker. Did that... still stays on. Model G7CE3034XB00, Serial D43005649. On Sept. 4th I called & spoke to Carrie (I believe in TN) who told me she would try to find a service tech in my area & would get back to me in 3-5 days. Apx. 5 days later she called & left a message on my cell phone stating that she could not locate a service tech in my area. I would need to find my own service tech & submit any invoices to the resource dept for reimbursement. Parts could be ordered at no charge. I have nothing in writing from the company to confirm I would be reimbursed, nor was I told how to correspond with the resource dept in the event I had an invoice to submit for reimbursement.Today, Sept. 18th, 2014, I called Whirlpool again (800-253-1301) & talked to Stephanie in Michigan. She told me the same info. When I asked to be sent a wiring schematic I was told I didnt need one. When I asked how to get in touch with the resource dept. I was given a fax no. & email acct. When I asked how I was supposed to get in touch if I didnt have either, she said I should go to the local library. Now lets imagine for a moment that I am disabled or live so far out in the country that I cannot get to the library... How am I supposed to get to a fax or email acct. Has anyone at Whirlpool considered that? This is a new appliance under full warranty, yet it has become my job to find a service tech, pay up front, & wait for reimbursement. REALLY??? I am also in the market for a new dishwasher & you can bet it wont be a Whirlpool!

My wife and I purchased the Whirlpool French Door Bottom Mount Refrigerator in April 2013. Thank God we purchased the extended warranty. In June 2014 the ice maker quit working and delivering water. We have had the service contractor that WHIRLPOOL has qualified for all repairs. They have set up FIVE appointments to resolve the issue, all of which I had to leave work to meet because they do not provide any scheduled service outside the hours of 8am to 4pm. The first time they came the service man told me that WHIRLPOOL RECOGNIZES THERE IS A DESIGN FLAW BECAUSE THESE ARE NOTORIOUS FOR FREEZING UP AND NOT WORKING. I asked the repair man if there has been a recall because of this, he said no because WHIRLPOOL WILL JUST REPAIR THE ONES PEOPLE COMPLAIN ABOUT! I called Whirlpool headquarters today. The advisor said he will register my complaint. I asked, Is that it? What does that mean? He said, I cant tell you what happens after I register the complaint. I WILL NEVER PURCHASE ANOTHER WHIRLPOOL PRODUCT. I hope this may help someone NOT make the same mistake. If you need to talk to someone in upper level management to discuss your issue, forget it...they want the position but no accountability.

The first washing machine I bought was a Cabrio. Started having problems right off. After the repair people had been there several times we finally got Whirlpool to replace the machine. We got another washing machine. We bought two warranties because it kept tearing up. Repair people said this time it would take $1500 to fix it so of course AIG said, We will not pay this much. So I have a washing machine I have spent $1600 on and it leaves, greasy spots all over my clothes. So fed up with Whirlpools trash!!

I purchased Whirlpool Washer WTW4815EW on December 29, 2015 for my tenants apartment and by October 7, 2016 it was not working. I called Whirlpool for service since the product is under warranty. The closest appointment was more than 2 weeks out. On the appointment date the technician called me and said he was on his way to my house which is more than 30 miles from my tenants apartment. The technician said he could not service the tenant area as that was a different group, so we rescheduled for a week later. A week later no one shows up, so I rescheduled yet again for November 3rd and drove myself to wait for the service person who was supposed to be there between 8 am to 12 PM. At 11:40 I saw there was a 10:36 am Whirlpool attempt to call me but no message was left. When I called back they told me the technician called in sick and they called at 7:30 (my iPhone indicated 10:36 am). Now they say someone will come on Saturday November 5th. It will be one month on November 8th with no working washer. While it is bad enough the washer stopped working in less than one year their service support is even worse than the product.

I bought a 3 burner glass hob under your built-in cooktop category (model no. AKCG 930-90 cm) in Nov. 2015 from Coimbatore, Tamil Nadu. In the month of April 2015 I started having problems with the medium burner. The problems was rectified on 29-4-2017 after some replacements that cost me Rs. 5000. After two months again the same problem occurred, the medium burner was not igniting again, I registered a complaint on 5-7-2017, the representative came and did some maintenance and left but the same problem resurfaced after a few days.I was fed up of complaining and started using the burner during necessity by placing a weight on top of the knob. Finally on 15th Feb 2018 while I was using the stove the glass top cracked into pieces. My experience of the companys built-in cooktop is horrible and bitter. Every time I registered a complaint the representatives used to attend the complaint after 2 weeks and that too after so many phone calls. I am really dissatisfied with the service and quality of the product. I therefore strongly recommend customers not to buy this product.

Just like many other reviews about this brand - our microwave went bad after only 14 months of using it. Initially the door sensor would register - it wont operate even if the door is closed. Or it will keep going even if the door is open. I contacted BBB and the Whirlpool corporation regarding this safety issue. I pointed out that the safety mechanism is faulty and they should recall all of those models that have similar issue with door sensor. This is extremely dangerous for households with kids. There is a reason why this safety mechanism is mandatory in all microwaves! Whirlpool pointed out to me that I should not try to operate microwave with open door and refused to take any responsibility. Ive owned probably 10 different microwaves over the years and NEVER had micro go bad after only one year, yet alone have completely faulty safety mechanism. Consumer beware!

We purchased a Whirlpool gas range on 12/3/11. It was to be delivered later that month and days before delivery we received a call the stove was damaged. They asked if we wanted it and could get it at a reduced price. We said no, we wanted a new one and that one was delivered on 1/4/12. This stove has had many service calls to fix the ignite for the oven. The ignite and a circuit board for this problem has been replaced many times. The smell of gas in the house is terrible from the many times you try to light the oven. This problem has happened many times when a family event was going to be done (Thanksgiving, making Christmas cookies). It is also very poor advertisement for the company and stove to have this happen when there are so many people around. They will have a tendency to spread the word by mouth. PS: When we called (12-13-13), the woman stated after 4 calls for the same thing there should be a replacement or a refund of money (All the calls have been for the same thing OVEN IGNITE and GAS SMELL).

Whirlpool Cabrio Washing Machine F1 code - We have had this washing machine for over 6 years now, and ever since our 3 year warranty time was up, the washing machine will only stop, and display the F1 code as soon as the wash cycle has completed, with 23 minutes left. To start off, with this problem, it is causing me more water, and electricity that should not have to be wasted if the machine worked properly. I called the place where I got the machine, and was told to give Whirlpool a call. I did this, and was told that there was nothing that could be done, and if I would like to schedule an appointment for a tech to come out and work on it, they could do that. YES, I would have to pay for it. Needless to say, the washer has been doing this for over 6 years, and if there is a way to get it fixed WITHOUT having to pay for the repairs, that would be wonderful.

We purchased our oven from Sears, and less than two years later, the oven would not cook a chicken. We do not use the oven very often. We grill out and use the top burners often. We had the oven repaired through our home warranty program, and now 8 months later, it seems to be occurring again.

Whirlpool washer WTW7800 Cabrio - I bought this machine in Oct 2010 for $900.00. This October, the lid started not closing. Next thing I know, the glass is popping out. After waiting on hold for 20 minutes, I was told there is nothing they could do but refer me to a repairman at a cost of $179. The glass is popping out. This is a defect not caused by washing clothes but poor workmanship. I am on hold again. I am calling channel 3 news to do a story and will not stop until it is fixed.

I have a two year old Whirlpool dishwasher. The soap dispenser cover broke shortly after the warranty ran out. It cost 100.00 for repairs. A year later, it broke again. I sent a letter and the part to the CEO of Whirlpool. They sent a repairmen to fix it free of charge. When you have a problem with a Whirlpool product go to the head of the company. If they get enough calls they will make better parts. Call 1-269-759-6919. Write a letter, return request receipt. It takes a little effort, but it helps a lot of people.

Whirlpool Cabrio 8kg washing machine - Purchased this washing machine because of the size, water efficiency, no agitator. Have purchased Whirlpool products before and havent had a problem but this washing machine is absolutely a piece of garbage. At first our water bill was hugely excessive so tested the machine and it was using 269 litres per wash when it was only supposed to use 98 litre as stated on the machine. When doing 2 washes a day you can imagine the water bill we had. Lint on washing, continually out of balance no matter how much was in the wash. Had it fixed under warranty then just out of warranty. Water wouldnt turn off. Had to turn it on and off at the top lid. Could now be opened during washing cycle. Started turning itself on in the middle of the night and day. Had to unplug it to stop it, wont spin out clothes. Still sodden. After cycle finished with the lid open it would start to fill up with water again and going out of balance again. Had the appliance people out for the 4th time. Had to have the motherboard and a valve replaced. Its still leaving lint. Washing is not even getting wet so it cant possibly be cleaned. Contacted warranty people. They came out and said it is running as it should be but they advised us this is a common problem with this brand of washing machine. Personally I wish I could throw it away if I had another $900 to waste on another machine.

In the past 8 years, I have had to replace 2 Whirlpool Calypso washing machines and 1 Cabrio washing machine. All 3 washing machines worked great for the first 2 years. I purchased the Whirlpool extended warranty on all 3 washers. The first Calypso had 12 repairs done on it. Finally A&E repair service deemed the washer not repairable. Whirlpool replaced the Calypso with a new Calypso. Based on the problems with the first one, I again, purchased the extended warranty. Again, after the manufacturers warranty expired, I again had issues. After numerous repairs, A&E deemed the washer unrepairable. I contacted Whirpool warranty service and was told that they would reimburse me 75% of the cost of their choice of a Whirlpool washer! Since I have had 10 hand surgeries, I need a washer that does not have an agitator (hence the original Calypso purchase). The model that Whirpool warranty deemed as a replacement had an agitator and was also a much lower energy efficiency rating. I found that the Cabrio was a comparable replacement model and finally Whirlpool agreed to replace the washer at 75%. I was angry that they didnt cover the total replacement, but felt at least I got a totally new problem-free washer. I again purchased the extended warranty. I got the Cabrio in March of 2008. In April of 2011, the washer started getting rust around the bleach dispenser and also I would get UL code (Uneven Load). A&E tech came out and replaced a bearing. He said that the rust was not covered under the warranty. I asked how it was okay to have rust around the bleach dispenser if the washing machine is always wet with water. A month later, I was still having a UL code and the rust was getting worse. A&E came out again and said that even though I saw rust around the bleach dispenser, the rust was in fact underneath the tub and had eaten away at the parts. He called the warranty company to authorize repairs and the Whirlpool warranty company denied any more repairs on the washing machine.

I hope the CEO posts this on a giant screen in front of all their employees. The first thing I did after moving into our new home is brag about the American made Whirlpool appliances. Being from the Midwest I take pride in made in the USA product and go out of my way to support homegrown companies. I know that a number of the components in my fridge include the fan that failed after 11 month were most likely sourced and manufactured in China... but that no excuse!! Whirlpool needs to do a better job of QC. You need to be passionate and rigorous with your testing. Dont reduce cost at the cost of your customer base. It is amazing were to the point where we can no longer compete with China in quality.Second is customer service, if you know you cant compete in quality you need to be able to make up for that with customer support. I called Whirlpool and scheduled an appointment the day the fridge quit working. I was upset that it would take three days to have a working fridge but I was understanding. Lucky for me I had an understanding neighbor too. Anyways, when the day came for my scheduled warranty repair I was told that Whirlpool was mistaken and that I wouldnt be able to get it serviced for another week! This is just unacceptable.Right away I called the Whirlpool customer service representative and manager to express my frustration with this error. They were polite and both agreed with my frustration. It also sounded as if they also didnt understand why their own company was doing such a poor job addressing repair issues. They made it sound like this was a common problem of people getting overbook at repair service providers. Again another fumble. Bottom line, due to my position, I dont really have a choice but to wait another week for a repair. Take note: Every time you lose a customer like me this you lose 10! I will now go out of my way to tell people about my negative experience rather than my positive. So disappointed.

To be fair to Whirlpool, I have contacted them but have not given them time to respond. I feel so strongly about this issue that I want to get the message about this company product out. About 2 years ago, we purchased a Whirlpool fridge, stove, and dishwasher. I have had so many problems with the stove (WFG540H0AS0) that it has pissed me off, actually. First, the knobs that control the stove top melted. MELTED! We had to replace them to the tune of $30.00 each and there are 5. Why would anyone use knobs that cannot withstand heat on a stove?! News flash, I cook on my stove. Therefore, there will be heat used. Second, the oven keeps shutting off in the middle of cooking my holiday meal. Of course, this made my turkey take much longer than usual. Today, it shut off in the middle of cupcakes. Third, the oven does ignite without turning it on and off multiple times. So we called the repair person who told us to replace the ignition switch for it. This helped for about one month. Then the problem started again. I just emailed Whirlpool and I will call them next business day. I am so disappointed with Whirlpool. I thought they had a good reputation for quality products.

Whirlpool Cabrio WTW8500DC0 - 2 months out of warranty, 14 months old. Motherboard fried. $300 if I do it myself. $550 to have it done. The unit was $780 on sale. Brand new piece of junk. Zero stars but thats not an option. Quite honestly, it doesnt clean very well and it doesnt rinse very well so we have to rinse twice to get the smell out if we use bleach. So whats the sense in buying a high efficiency washer? I work outdoors and weve had cheap washers in the past that clean much better and lasted many years.

Purchased the Whirlpool Cabrio washer January 2010. Purchased the extended 2 year warranty from Lowes. After about a year I noticed around the bleach dispenser it was starting to rust. Over some time it worsened and grew bigger around all sides. I was unhappy about it, but thought it was just cosmetic and didnt pursue the issue. Now it must be on the inside and has started putting yellow spots on all of our clothes. It was only a towel or two at first and now it is on everything. I called Whirlpool and Lowes customer service center and they are just sorry and will not do anything. Lowes warranty does not cover any rust whatsoever although I cant find that stated on the warranty papers. I will never buy another Whirlpool product, ever. $600 for a washer and $70 for an extended plan to last on 3 years. I know people who have washers for 10 or 15 years. Im so disappointed.

Whirlpool is the manufacturer of most appliances including the Kenmore dishwasher. Your products are made horribly for the mother board to go out in 2 years is ridiculous. I purchased a stainless steel dishwasher from Sears in August of 2014. 2 weeks ago I received error codes E2 and F2. A technician came out and the mother board needs replaced because water got into it... its a dishwasher. The cost to fix $465. I paid $673. The sales person informed me that I should have purchased the extended warranty because the appliances now only last a few years. Seriously... fleecing of America. This is my last purchase from Sears. We have bought appliances for 30 years from Sears and this is the end. They could care less about customer service or their products. Apparently everything is now made by Whirlpool who will also be getting a review. Shame on you for making poor products.

I have had two Gold Series dishwashers before but the model number I used had been discontinued so I purchased the W10491035A about a year ago in 2013. It has to be the worst dishwashers I have ever had and we have used them for forty years. Its loud. It won’t dry the dishes, and unless you wash I dont mean rinse, most of dishes are not clean, and that is with the recommended detergent. Whatever you do I would suggest not buying this dishwasher. I dont even know why they would offer a machine such as this.

Purchased a new range from Lowes in November. It was delivered in January. Was told upon purchase that there was a one year warranty on the item. After using the item approximately three times, a piece of aluminum foil fell to bottom. It stuck to the bottom and removed some of the porcelain. Bacon grease had spilled into the middle of the oven which caused the oven to warp and also discolor the porcelain. They sent a tech out, who called Whirlpool. Whirlpool told them that it was cosmetic damage and only had a 30-day warranty! They also said I had to contact customer service again, which I did. Customer service said that the tech didnt do what he was told to do and that they would send someone out again. The same tech came out, called Whirlpool again, and was told there is nothing that can be done. I asked to speak to a supervisor because I was unsatisfied with this response. A two-month old oven shouldnt look like it is five years old. I never spoke to a supervisor. The rep just kept telling me that there was a 30-day warranty and that it was stated in my manual. After insisting that I speak with a supervisor, she placed me on hold. After a few minutes came back stating that she is sending my request to another department and that they will call me back in three to four days with their decision. I would not purchase another Whirlpool appliance even if they decide to replace this one, which I sincerely doubt that they will. VERY POOR CUSTOMER SERVICE!

Purchased side-by-side 3 weeks ago. There are 2 adults and 1 kid in my household and the ice maker in the unit does not put out enough ice to handle our small demand, though this was never an issue with the 14 year old Whirlpool that this one replaced! We are using ice trays to supplement what ice the ice maker puts out but the ice trays take up valuable freezer space. Their service reps have inspected it and tell me that it is performing per the specs and when I ask for what the remedy is, there is none... ie. too bad, so sad!! I am apparently on my own with a brand new refrigerator with an ice maker that wont perform up to minimum expectations!

I love the large capacity of the washer. But something is turning my whites YELLOW! I have never had this problem in 40 years of washing clothes. All of my whites come out yellowish and I am getting what could be rust stains on heavier cloth (white denim). Also, I regularly used the soak setting on my old Whirlpool. That setting is not available in the Cabrio. I have tried catching between cycles and the drum is constantly emptied. I wish Id read these reviews before I bought.

I purchased a washing machine FS65 on 10-30-2005. In Oct. 2009, my washing machine developed some fault so I contacted the Whirlpool service center and got it repaired. Again in Dec. 2010, the appliance became faulty and so I contacted the service engineer to attend to the machine. He repaired it and I paid 2500/-. But the very next day, my appliance showed the faults again. It was rectified with replacement of PCB and I was charged 2786/- on 01-20-2011. Again on 09-04-2011, the machine became defective. On the call to service center on 09-05-2011 and attended by engineer on 09-06-2011, I was informed that PCB is defective. I failed to understand that the PCB replaced in January was of what quality that it has to be replaced now after such a short span of time. I feel that this is clear cheating with me.

After 2 years it stopped draining. We have to physically hit cancel to get it to drain. Also, I have had to make my own tool to take bottom spin bar off to get to and unjam grinder and we pre-wash all dishes.

This washer is 5 years old and the top is rusting out on the inner rim. I have city water that has been tested and found to be totally safe to use and drink. Neighbors using the same water and owning different brand washers have no rust problems. Does anyone else have the same problem with their Cabrio washer?

We purchased this Whirlpool Cabrio washing machine from Sears about four, maybe five years ago and have complained repeatedly. We have had repairmen out numerous times. Of course, they have had to order parts. My clothes are not getting clean and they now have an odor to them. The machine is getting noisier and noisier and it is rocking like crazy (I had to put plyboard underneath to protect the floor) during the rinse cycle. The water sprays out erratically and sprays even slower for cold water, then warm water, which was weird! Thankfully, I still have it under warranty (I got the extended warranty). I am now getting ready to call them again. I will never buy this brand again.

Whirlpool Cabrio HE washer - Purchased my set in 2007. Has not worked properly most of the time we have owned. Lid locks our clothes in when the machine malfunctions and we have to barter with the machine for hours of Google suggestions to get the clothes back out. Still dirty. Or still soaking wet, not spun. Ive never seen so many error codes from one machine. I would never purchase this brand again. The only pro is the load size, which trust me - we have spent more time, water, energy & $$$ with the washer not properly working than the large capacity has saved us.

I have had my Whirlpool dishwasher for 8 years..I cant use the top rack anymore as it doesnt clean dishes!! I bought a brand new one for my cabin..I hope it works longer (right now it cleans amazing).

I bought the most deluxe and expensive washer and dryer I have ever owned. It is a Whirlpool Cabrio. The clothes come out of the washer dry, and all tangled up. I bought it new from Sears on July 2009. Now only two years old, and the washer sounds like a jet plane. I paid a repairman $90.00 only to be told this is common in this machine. The repair is expensive, and I would be better off buying a new one! I owned a cheap, little GE washer, which cost me $300; ten years, and never had a problem. Now my dream machine turned out to be a piece of crap. I will never buy a Whirlpool again!

Whirlpool WRF 990SLAM00 - Im 62, I have owned, and my family has owned a number of refrigerators and never have had any problems. I have been used to my refrigerators and major appliances lasting 15 plus years without any problems. I mostly bought Maytag washers and GE kitchen appliances. I had trouble with a GE dishwasher, out of warranty, but GE was very nice about it and came out and fixed it at no charge, then replaced it for free when it failed again. (No new problems in 4 yrs.). Then I made the big mistake of going with Whirlpool products in my new house in Florida, where I live half the year. What a mistake. First there was the Cabrio washer. After 1 yr and a week, It would not go to the spin cycle. I called Whirlpool, they said, Sorry, out of warranty. I told them, I only live in this place for half the year, so I have hardly used the machine. The Whirlpool person said, Sorry out of warranty. I asked for a supervisor and they were worse than the first person. The attitude was screw you, you should have bought the extended warranty. I called a repairman who fixed it for 150 dollars. During the spin cycle it gets really loud, but at least it works. Then the refrigerator. I arrived back in FL and the 1.5 year old refrigerator was not cooling. I called Whirlpool and said I needed a repairman. They said, Out of warranty, you can buy an extended warranty for 345 dollars. I said, No, a refrigerator should not fail at 1.5 years, send a repair man. He was great, but said the unit had a Freon leak somewhere in the box that was un-repairable. He told me, You need a new refrigerator. I will now call Whirlpool and see what they will do for me, but I expect little based on my experience with the washer, and others comments above. I will go back to all GE products after this as at least they seem to stand behind their products. Oh, and since Whirlpool now owns Maytag, as Whirlpool owns them now. Sad.

This refrigerator is only days old and I realize the mistake that was made in buying it- it is far too noisy! When it is running I can hear it in my basement- sounds like a car in my driveway idling with no muffler!!! And when it stops running, it gurgles loudly for 10-15 seconds. Dont even start on the door being hard to pull open after the door was recently opened.

I had to turn the gas off my water heater and when I tried to turn it back on, it refused. I called the number on the heater and somebody answered. The guy told me to take the pilot gas hose off to make sure there was gas in the line. I did this but after spending 1/2 hour putting the pipe back in, the pilot light did not go on. I called them back and they told me to push a white switch and hold it down for 10 seconds and retry. That didnt work either so they told me to call a repair man and gave me the phone number of a local plumber. Trying not to give up, I removed the pilot light pipe off and tried blowing and sucking on it. I couldnt get air through the pipe so I figure that somehow it was clogged. I tried taking the whole assembly off (there are 2 screws to remove) but couldnt get that out. I called Whirlpool again and asked for a manual to be sent over the internet but I couldnt open that either. The water heater is only 3 years old and already Ill be paying to repair it.

I purchased a Whirlpool (Cabrio) Washer on March 1 2018. I previously had a Roper top loader with an agitator that was 22 years old. I used that washer for that many years and washed clothes 6 out of the 7 days of the week. Probably at least 20 loads a week. I never had a problem with it getting my clothes wet & clean. It never left them dirtier after washing them than they were before washing them. I am so disappointed in this washer!!! I can see it will not do any good to complain to Whirlpool because apparently they dont care about their customers. They think theyre products are perfect when they are far from it. I plainly told the associate I wash clothes every day. Really dirt clothes. (My son is a mechanic). I need a good washer. I can wash them by hand better than this washer does. I am very thankful I have not paid the full price for this washer yet. I will be calling them to come pick it up when my next payment is due. I will be going to one of the local consignment or thrift stores and purchasing myself an old timey top loader washer with an agitator for $100 or less. Whirlpool I had high hopes with this product and would have been buying a dryer to match soon but I believe I will stick to my Roper products or anything other than Whirlpool.

Worst refrigerator Ive ever bought. Previous one still perfect shape. 22 years old. Freezes everything on top shelf. Motor making grrrr noises. Had repaired. Now bottom crisper drawers so cheap the plastic is breaking. Drawers wont slide. Now Deli tray lid snapped in half! STAY AWAY from this USA made product.

I have been trying for a month to get my fridge repaired. 2 techs later and still nothing. The 1st tech never turned in his report and I was informed by your customer service that it was my problem and I had to try to track him down and get it turned in. Tech #2 just left my house. He walked in, stuck his arm inside the freezer and said feels cold to me. I pointed out the melted popsicles and that the ice maker was not making ice because the freezer is not freezing. He then said he doesnt have the tools to do the repair, if it can be fixed, and to call him back after the Holidays. I have been w/o a fridge since Thanksgiving... a month. And no one has a solution. I was sold an inferior product that has a manufacturing flaw but I have to suffer for it. $800 out of my pocket and all I get from Whirlpool is Oh Im sorry to hear that. We can send out another tech. The fridge is less than 6 months old and still under warranty. It is a defective product that Whirlpool refuses to stand behind. I guess they are trying to wait out the warranty period so they are off the hook and we are stuck buying a new one or paying the tech for the repair. DO NOT BUY WHIRLPOOL PRODUCTS! Go Samsung, my previous model.

Today, after five years of washing items in the Whirlpool Cabrio top-loading, HE washer; I am taking the time to express just how poorly this machines operates. Clothes do not get clean, dish towels with dried food still have food on them, and towels get holes. If I wash items with sand after going to the beach, the dryer vent has to catch all of the sand that was never washed out. Rust has developed on the inside and drips down to ruin clothes. I would take back my previous washer with the agitator that was over twenty years old in a heartbeat. When we needed a new dryer, we went ahead and bought a matching washer. Painful decision!

The double oven is the best! Doesn’t heat up the house like the older stoves! Very easy to clean. The range is all one level, so it is at easy to set your pit anywhere. Also the middle burner is amazing for a griddle!!

I purchased a washing machine in year 2002. It was working perfectly. Recently, its drive belt started slipping. I called local service center, S. R. Enterprises, with mobile number 9204792391.The technician came after 3 days and declared that the gear box is leaking and will have to be replaced. They had no gearbox in stock for model f45, top loading, fully automatic.After a wait, they took away the machine to their workshop on 30.09.2011 and returned it on 04.10.2011.They charged me Rs. 4,730. I will have to be replaced. I found that its LID, which was perfectly okay, is now making a terrible sound when opened and would fall down, not allowing to load the machine. I informed the service center immediately. After many reminders, a man turned up yesterday and declared that the LID will have to be replaced and I will have to pay Rs. 2,000 for that. I rang up the service center to say, Since it has been damaged in your workshop, you should replace it free of cost to me. Their reply was evasive and negative. I called your call center and they registered my complaint - customer number **, comp. number **. I was assured that the LID will be replaced within 24 hours.

2016 Cabrio Washer - I had an 11 year old Maytag washer that finally gave up so rather than go through the repair I decided to upgrade to a new washer dryer and went with the Whirlpool Cabrio W/D pair. I am shocked at the washers inability to clean even the most basic of stains. I have to pre-treat clothes like never before, have tried every type of wash cycle offered and cant believe the amount of time it takes to clean clothes. Over one hour??? My Maytag may have agitated the heck out of a load but in less than 30 minutes everything was clean. Ive had to re-wash load after load of the most basic everyday stains. I was hoping the larger drum would allow me to cut my laundry time down but that is not the case, and find myself putting a few things in at a time so they get washed. Im stuck with this piece of crap and have only had it for one month... Cant wait for it to start breaking down and dealing with repairs as so many of these comments mention. I miss my Maytag!!!

Bought a new oven for my new kitchen. Two weeks after install, I had to have it repaired. Less than 6 mos. later, it is being repaired again, for the same problem. Whirlpools policy is to fix it till the warranty runs out, then not their problem. Buyer beware, and if you do buy, make sure you get the extended warranty.

The product has water and ice maker problems. The day we got the new refrigerator home, it did not make ice for one week. I called and had service come out. The line was not connected properly under the refrigerator. Water was flowing out of the front of the refrigerator. I called service again and they put in a new ice maker. The ice maker was still not working. I called service and another firm came out and said the new ice maker was bad. They put in another new icemaker. Now it is making ice but will not dispense it through the door like it is supposed to. I will call service again on Monday.

From the day I bought the refrigerator the icemaker has not worked. I have had a estimation of service calls (8) and nobody seems to be able to fix it. Whirlpool mailed me a new icemaker and still the exact problem; water and ice works but the unit still will not cube or crush ice; which by the way is the reason I bought a new refrigerator. My thoughts are I bought a lemon and the entire fridge needs to be replaced.

I have had nothing but Whirlpool for 40+ years, I am on my 2nd washer and 2nd dryer! They do the job I need, they are very reliable. If I had any downside it would be they don’t hold a queen size comforter.

Whirlpool Cabrio - 6 Big Problems: I dont write bad reviews on anything but in this case, I feel I have to warn potential buyers. Ive owned this washer for more than 4 years. Here are the problems: 1) This washer TEARS HOLES in my towels; 2) It SHREDS some clothes; 3) Loads are UNBALANCED every time I use it, regardless of load type or size; 4) Very LOUD when running. My neighbors can hear it and they are 150 feet behind us. It sounds like someone is pounding on the walls of my house. BOOM! BOOM! BOOM! I havent seen it, but I believe it might actually be jumping off the floor; 5) Its NOT High Capacity as advertised. Sure, the drum is big, but you cant put much more than a tiny load in it. If you try a larger load, the clothes dont get cleaned; and 6) Whirlpool wont do a darn thing about it. They dont care about the buyer or their own reputation.Our family grew and I thought we needed a larger washer. I foolishly replaced a ten-year old, $300 standard top-loading GE washer that never had a problem, with this expensive **. The GE had a drum that was about 1/2 the size and it washed MORE clothes! The GE never damaged any clothes and it wasnt ridiculously loud like this one. I regret ever buying this expensive washer and I will never again buy a Whirlpool product.

I have been using this brand for many years. My first washer lasted for 30 years..so I will stick with what I know is reliable. It is a great machine. Very simple. I dont need anything fancy. 3 different cycles to choose from.

Weve had this Whirlpool 5000DW1 machine since June 2017. Never fills with enough water no matter what cycle you pick! Clothes come out with DRY areas on them! Obviously not clean. Who would design a washer that you put soap in and clothes right on top of that! Seriously, how ridiculous. I will forfeit the money spend on this junk if its possible to find something built today that cleans clothes.

Whirlpool has always been a quality product in my household. I had Whirlpool microwave prior to the one I recently purchased. It lasted 10 years and was used frequently and always on daily basis. It worked like a dream and I would never purchase any other brand!

My hot water tank wont stay lit. I replaced the heating element, and the thermo couple. It will light up now but it only stays on for about 10 minutes.

Bought brand new, Whirlpool front load washer and dryer, from Corbeil. Got both items home and connected and levelled (yes I took out the shipping bolts). Did my first washing and watched my new washer dance across the floor. Called Corbeil and they told me no refunds. Best they could do was to send out a Tech to check it. Tech came, changed the shock absorbers, a token act because the machine danced as much as it did before. Please for your own well being DO NOT buy this product and DO NOT buy from Corbeil. There are other products on the market that advertise items that dont shake.

We bought a new Whirlpool side by side, model # WRS325FNAM00 in March 2014. In less than 48 hours, the freezer box was condensing and water was leaking on the bottom edge. The condensation got worse and worse. Five service calls later, Whirlpool replaced the freezer door--which took six weeks because it had to be manufactured.After the door was installed--no change. Whirlpool replaced the entire refrigerator in June. Guess what? The new one is doing exactly the same thing in exactly the same place. So far it has not gotten worse. Well see, we have only had it a week. But already the service rep has been out to the house and added the silicone gunk to the box in case there is a tiny air leak. Why would a brand new refrigerator have an air leak in the freezer box?

Water heater model N40t61-343 - Why does a water heater fail after 4 years when there is a warranty for 6 years? Is this water heater an omen for Whirlpool? I have a wife who is terminal and I trusted the Whirlpool name for hot water. What are Whirlpool going to do about this water heater?

My refrigerator is a side by side and its freezer compartment is small (width). Whirlpool is always my brand of choice for household appliances. I personally would not choose the side by side design again but I would choose Whirlpool.

Our Whirlpool refrigerator, model MODGI5FSAXVYO, began leaking water from the freezer onto the floor about 3 months ago. We purchased the unit in January 2011. We had to keep a towel on the floor to absorb the moisture. Our troubles began after the freezer door was left ajar and the interior became quite frosty. We had turned off the freezer several times to defrost but nothing helped until this morning when I read the comments of Marea of McClellanville, SC and Ruth of Vavenby, BC.I then decided to begin exploring taking apart everything until I reached the freezer unit in the back of the freezer. I discovered a lot of ice with the ice blocking the drain hole which is supposed to drain condensation from the freezer fins to a drain pan in back of the freezer. Apparently, leaving the freezer door ajar caused the drain hole and surrounding area to ice up. Condensation from the fins would keep dripping until it overflowed onto the bottom of the freezer until it filled up with ice. The water then had nowhere to go but out of the freezer onto the floor. The simple solution to this problem is to turn off the fridge, empty out the freezer and allow the frozen drain hole to thaw out. You can easily remove the back panel of the refrigerator to see if water is then draining into the drain pain. Good Luck! Ed

This Cabrio washing machine is really frustrating....... It goes off balance all the time. It does not matter if you have a full load or partial load, I know it has a tendency to go off balance, so I try to put the clothes in evenly. BUT it doesnt matter, it goes off balance. When the washer is downstairs, it gets to be a pain. The lid lock is a pain also. If you forget to put something in the machine, you hit pause button then you have to wait forever until it unlocks, and wait forever to unlock when it goes off balance. When it doesnt go off balance, it washes everything just fine. But if I knew what I know now about it, I would have never bought it....... I would recommend a different washer and check the reviews, which I didnt do. :(

Whirlpool convection/microwave GMH6185XVS - In 2011, we purchased a whole new kitchen for our home with the top of the line Whirlpool products. The sorry side of this project was our microwave. This product has been terrible for us! It has been removed from our wall 4 times for failing... and four times we have gone for weeks at a time with a big hole in our kitchen wall!! All of the failures were due to the microwave not heating food or drink, and all, according to our local dealership, were for various different reasons. Again, it has failed and our local appliance center who we bought everything from does not want to deal with it anymore. I dont blame them... I dont either!! It looks beautiful up there above our range telling me the time of day... My wife and I are older adults and take very good care of everything we own. There certainly has never been any abuse to this product (not to mention we spend half our year at a winter home so this microwave only is used for 6 months a year). I contacted Whirlpool customer service about the reliability of this product and their response was that it is now not under warranty and we should deal with our local store about repairs. I have a small Sharp microwave sitting on the counter below this crappy excuse for one that stays there all the time in anticipation on the Whirlpool going down!!! The $60.00 Sharp never fails me!! This was our 2nd time around purchasing all Whirlpool products for our house. We did the same thing when we built back in 1990. All appliances performed as they should have back then. It seems Whirlpool integrity has gone downhill. I will never buy another Whirlpool product nor I will recommend to anyone I know to do the same. Good luck to anyone who purchased one of these.

This is a freezer on top unit. Purchased in 2015, unit quit cooling, started making a roaring noise. Called local technician, he added 2 oz of Freon, said he has seen many of these same unit losing Freon. Technician said line that goes to compressor is copper and hooks up to aluminum line before attaching to compressor. This is leak point for freon; no way to know when the leak started, but freon almost gone and cost to pressure check for source of leak is costly and probably would not repair problem. Got 6 yrs out of it and I am replacing with another brand. Will never buy Whirlpool again. Should have got 10-12 yrs of use. Do not buy this unit. Wrote Whirlpool first, but no help. Indicated this could be a problem with these units but no recall so I am on my own. Out $900 for a new refrigerator. Big hassle. Unit no good.

Ive had my Whirlpool water heater for almost 4 years now and for the last year and a half, I had to have the pilot light lit at least 5 times. I finally got so frustrated around the 3 times and called the company. They gave me instructions on how to light it and to ensure no draft was around the tank. A couple of weeks ago, it went out again and I called. This time I was told to replace the thermocouple. I did that and guess what? Still no hot water. Im a single parent with 2 kids and weve been boiling water just to bath.A service tech came out and told me I need to replace the tank altogether. I called Whirlpool service and they told me it was nothing they can do. Like many of you, I got this tank from Lowes and they will not do anything about it either. Its hurtful and stressful that doing a holiday season, I have to decide to either buy a hot water tank or give my kids a good Christmas. I know several friends and family who has had their tanks a lot longer with no problem. My problem is its a crappy Whirlpool brand with poor customer service.

We purchased a Whirlpool oven a year and a half ago. Today the interior glass exploded while cooking frozen French fries. Whirlpool customer service indicates that this is unusual. Whirlpool indicated that the only way they will repair it is if we pay $375. We declined to pay an additional cost for this product which failed to function safely. In a quick Google search, it appears that the oven glass fails more frequently than represented by Whirlpool. We are disappointed in this product and the companys customer support and lack willingness to correct a product safety issue.

I bought a brand new KitchenAid stainless steel refrigerator for close to $3,000.00. It has a big crack in the back casing which Im sure is affecting the seal. It is still under manufacturers warranty. Whirlpool sent out a technician to put a yellowish plastic epoxy to seal the crack. When I told him that this was unacceptable as it dries yellowish and has a dull finish he explained that that was all Whirlpool was willing to do.I have been dealing with Whirlpool for 4 weeks now and they refuse to repair the crack and they deny any manufacturing defect. I have sent them pictures of the crack and they still refuse to resolve this issue. Very bad, horrible experience with customer service, long waits on the phone, rude and ineffective employees. This CLEARLY is a company that will not stand by their product and I recommend everyone to CLEARLY stay away from purchasing any Whirlpool products. They will be paying a lot of money for very poorly manufactured products.Please, please, do not purchase Whirlpool products! You will be happier spending money on a company that values you as a customer before and after the sale. Obviously Whirlpool would rather forget you after they have sold you their product and have their money. Thank you for reading this. I hope I have saved potential appliance customers from making the same mistake I made. DO NOT BUY WHIRLPOOL!

I exchanged my fancy front loader Cabrio washing machine for a top loader after having numerous issues: clothes werent getting clean, extended water cycle, and a leak. The original purchase was made at Lowes, where I elected to invest in the 3 yr extended warranty plan. After several visits from their sub-contractor, they allowed me to exchange the washer for a top loader Whirlpool Cabrio. At first the washer seemed to work, but after about 8 months I started having problems. The bearings went out and when the service company replaced it they forgot to screw top of the machine together. During my first load, I heard this terrible noise and discovered that the entire top of the machine had separated from the bottom by 2 inches. I frantically rushed to turn the washer off before my laundry room flooded. So, they were out again and screwed the machine back together but failed to retrieve the original screw that they removed from the washer during the first round. Well, the screw got lodged in-between the drum and interior, causing it to completely break the machine. Lowes agreed to exchange the washer for another top loader Cabrio, but my 3 year service contract would not cover the new washer. Not to my surprise, I immediately had issues with it and had to hire a repairman to assess the problem, who concluded that it was the bearings. He informed me that it would be about $700 to replace the bearings and cheaper to just buy a new machine. I called Whirlpool and explained to them about all my issues, now becoming almost comical. They arranged for an outside contractor to assess it. After confirming that the bearing were bad they replaced them. Another few months go by before problems occur, this time the washing machine stopped draining water and spinning. The service company was out another 4 times. They replaced things like the mother board and control panel. My last appointment was today, where the service guy said, There is only one error code. It is a stuck button. I said, Will you at least witness a full cycle so I can show you all my problems: clothes still dirty and stinky, items still wet after spin cycle, cycle taking 2 to 3 hours to run, horrible noises, and timer adding minutes to original cycle. He called Whirlpool because he genuinely felt sorry for my situation. They were of no help. He didnt stay to witness a cycle. Moral of story: if the error code doesnt detect a problem, the consumer will not be helped (this is something that consumers do not have access to). They will happily call a technician out to put a bandaid on an issue until your warranty runs out. I have had between 7 to 10 service calls out to my house, requiring me to take either an entire or 1/2 day off of work each time. If I added up all time lost at work, I could have easily purchased a top-of-the-line washer/dryer duo and been done with all this Whirlpool foolishness. Do yourself a favor, stay away from this product.

Even with the hottest water on the most heavy duty setting, regular dinner plates are not cleaned. The flatware holders that are set in the door (instead of free-standing in a rack) do not have adequate holes in the holders and are too far away from the limited jets to get adequate soap and water to cleanse the flatware. Even after rinsing all scraps off the plates and flatware, we find bits of food, gravy, or smudges on the plates and flatware - since its first usage. The manufacturer had the audacity to claim that was normal. Settings include delayed starting, heavy duty versus normal washing, and different types of drying. The heavy duty washing is definitely poor quality, and there seems to be no difference between any of the drying settings. The delayed start is nice. The physical layout of the prongs on the racks and the folding racks do not allow easy fit for most sizes of pots plus plates on the same bottom rack. I cannot put a 1 gallon pot level on the same rack as dinner plates. I must put it beside salad plates. Only small sauce pans fit neatly or cleanly beside dinner plates. Yet the external dimensions of this dishwasher are the same as the competitors standard size. Looks neat and is easy to clean. Also, the exterior does not show scratches. Actually, I cannot see where the exterior has any scratches. The service people were very little help. The Warranty said that after five (5) service calls the unit would be replaced. We made six (6) service calls, but we were told that we did NOT have six because if you called again within 90 days of a call, that was considered the same service call. That requires 450 days minimum to have five (5) qualified service calls, but that warranty was good for only 365 days!

We have had this range in our new home and in use since May, 2019. The first range had to be returned after its first use due to flaking of the interior walls; a problem the company acknowledged. Since then we have been so unhappy with its ability to maintain the oven temperature. Contrary to the instructions, we calibrated the oven temp and found that it would vary up to 20 degrees lower than the set temp. When set to 350, it would come up to that temp and then cut off until it fell to 330 when it would come back up to 350. That is a great differential noticeable in the time it takes to heat an item and which greatly affects baked goods. A similar lack of consistency in control in the range elements is apparent as well. Now those are major defects. Minor defects are: it is NOT a rapid preheat at all, both lights are on when the switch is engaged even though only one oven is in use, there is no clock function when the timer is in use and the range surface is difficult to clean as it streaks which is visible with the black finish.

New whirlpool washing machine 2016 - This washer is supposed to be smart, but it NEVER fills up with water! I always have to fill a bucket with water and throw it in the washing machine. My clothes do not come out smelling fresh and its not the detergent to blame, its the washer! Im so disappointed with this product. Whirlpool should stop making products.

I purchased a Whirlpool WFW9050XW washer in Aug 2011. I have had nothing but problems. Sears sent repair tech 2x; it would work for a couple months and stop. Whirlpool has sent new motor, tub, switches, etc. I feel I bought a lemon and I want Whirlpool to replace the machine.

Update Review on 10/15/2020: New refrigerator 12/31/19. 4/27/20 Fridge terribly noisy, called Whirlpool directed to local provider. 5/5/20 Fan replaced, drawer clip broken. 5/11/20 Drawer repaired. 5/21/20 Fridge not keeping up, repair company said new compressor needed. 7/6/20 After numerous calls and literally hours on hold with Whirlpool compressor install but still seemed noisy. 9/30/20 Fridge partially cooling, no ice and water dispenser not working. Repair company ordered new evaporator cover and UI panel.10/15/20 Neither the repair company or Whirlpool know when the parts will be delivered. Whirlpool has no record of their being a service call or parts ordered. I talked to one rude, unhelpful and uninformed service rep. After following their instructions and using their recommended warranty provider, they claim not to have the issues in their system and cant be used to determine the repair/replacement of their unit. He indicated, You need 3 major repairs in 30 days to get a replacement fridge. It took them 6 1/2 weeks to repair the compressor. How can it break that many times in 30 days with that bad of service. Nothing is repaired in 30 days. The current rep seems to care and have a working knowledge. She is sending a request to determine when a part might be delivered. She couldnt give any indication of when the part might be delivered to complete the repair. Days? Weeks? Or again Months? An hour and a half on the phone with very little progress. New refrigerator with 3 major repairs and one small one in 9 months. Terrible refrigerator and extremely poor service! Go with another brand.Original Review: Refrigerator new in January 2020. The first issue was an extremely loud fan.It was replaced. While being repaired, service tech broke a tab on the door. (It happens) Another call to replace the tab. During May I notice its not making ice and freezer isnt keeping up. Lose all items in freezer. Now the 4th call on new refrigerator, tech says needs a compressor and orders while at my house. Soon the refrigerator isnt keeping cool. Now 34 days later, still not fixed. Whirlpool service provider blames Whirlpool. Whirlpool says they are shipping compressors but cant exactly say mine is delivered. Apparently, 4 service calls in 5 months and over a month with a totally broken refrigerator is their bar for a good product and service. Neither their approved service provider or Whirlpool care in the least. Awful service. Try another brand!

I recently purchased a Whirlpool Slide in Oven replacing my Amana stove of 15 years. My Amana was a very basic model, and I thought this WP was an upgrade. But it is so poorly made its ridiculous. First of all the bottom storage drawer, is so flimsy, it does not slide out easily, and the top lip doesnt even have a finished edge. Additionally there is a 1 inch gap between the top of the drawer and the bottom of the stove door. But the BIGGEST disappointment was the oven racks, totally flimsy.We used a Lodge Dutch Oven (which we have used many times with our old stove) and the oven rack sagged under the weight. Had I known I would have pulled the racks from my old stove. I contacted that seller about these issues, and they said they are ALL like that even the higher end ones, and I contacted Whirlpool to see if I could buy better quality racks and they said no, this is all they have.

My microwave came with my house. I didnt choose it but it has been a great brand. I love the preset timers for defrosting & for popcorn. Its big enough to handle an 8x8 pan which was important to me. The turntable could be more stable. My model is a built in over the oven option. Black & digital. It has lots of preset options & is pretty user friendly. I like the size & it is super quiet.

I have a whirlpool water heater. This is the third or 4th time that the upper sensor failure code has come on. Our water heater turns off all the time and we have to fire it back up. In the past few months, it has started pouring water out from the long tube on the side of it anytime we turn it on for more then 10 minutes. The last time we called a plumber, I was trying to get a quote on a tankless water heater. Ive been so fed up with ours and I thought that would be a better route to go. The plumber explained the negative sides to a tankless water heater and explained that our water heater was a really nice, really expensive and fairly newer model. I told him that I had just gotten it about four years ago. He said he could just fix that one. So after looking at it, he acted as if he didnt know what an upper sensor was and told me it was under warranty and that I should call for the parts. Every time we have called for the parts, they send the same box thing on the front of the heater and every time, it doesnt fix it for long before it says the same thing. And now, like I said, the water heater has now added the problem of pouring water out of it. I need help. I dont know what to do. Im tired of not knowing if Ill have hot water or if the water heater is going to pour out water. Im pregnant and worried that if we cant get this fixed Ill continue to have this problem along with having a baby to take care of. Please help.

My two-year old Whirlpool Duet Front Load washing machine is ripping my familys clothes. When I went online and saw all the other customers with the same issue, I contacted Whirlpool. Although the contact said that he knew I was frustrated, he could do nothing but send a repairman at a cost of $129 for me and then I would also have to pay for parts. I informed him that the online sites are saying that this is just a temporary fix. He pleaded ignorance and could offer me no other alternative. This is the last Whirlpool or Maytag product we will ever buy... and letting others know about the lack of cooperation.

I have always had Whirlpool Everything - not anymore!!!! I purchased a water saver washer that I am very unhappy with - it does not get the clothes clean. I have to put it on an extra rinse (water saver?) to get the soap out. I use the Tide for HE washers. I cannot wash a large load in it - directions say I can. Anything too heavy or bulky will not spin out well. Will bounce all over the place. From now on I will switch to another brand. They push so hard to buy a warranty because they know you will have trouble! Should have read the reviews!!

The drawer guides on the large clear drawer at the top of the whirlpool refrigerator are very flimsy causing the drawer to drop when pulled out to the stop. When I called about this I was told it was cosmetic and not covered under warranty. I purchased the extended warranty which will replace the flimsy parts with the same flimsy parts. On 6/24/2024 Denisia sent me new side rails, exactly the type I have. I replaced them but the right side one broke. I regret ever owning one and will not recommend a whirlpool product to anyone. It is very obvious to anyone, after using this product, that that particular part is not safe and is definitely more than a cosmetic problem. I have already dumped the contents on the floor once and have just managed to catch it more times than I care to count. I spoke with Danielle on 5/14/2014. She sent the small plastic drawer that goes on the bottom.

I have had my Whirlpool Gold for 8 years now and it has met my expectations. The glass shelves are easy to keep clean and it lets the lights give an open feeling to see everything in it. The ice and water dispensers are used many times every day and work just fine. Great appliance.

Whirlpool Gold microwave quit heating after little use. We moved in house one year ago, microwave 6 years old. Spoke with Timena customer service rep. She took my model, serial info and clearly explained this model had defects and they would replace for free even though 1 year warranty was up. Delivery staff would call within 24 business hours. After 4 days I call back and get Mia rep, she claims I was disapproved for new unit after all?? I spoke to 2 supervisors above her Karin in Tennessee, and another. They claim I was mistaken??? I said, “Look up the recorded call and you will see the message is clear... They acted shifty and claimed I should buy a new starting at $1399!!! They would consider small discount?? Their rep was clear at first then they failed to back her up. Terrible customer service. Lied etc. Never buy Whirlpool!!! They are cheap and don’t stand behind reps. Awful company!!!

Purchased fridge in November. Broke 1st time in May. Design defect that Whirlpool knew about. Repair was to move a part called a thermistor farther away from where ice was building up. Broke again in July. Called for service July 28th. Its now Aug 23rd. Was just told by repair service parts might be in Sept 15th. Had to throw food away twice, missed work 5 times for service calls. Repair company & Whirlpool have done nothing but lie to me. All Whirlpool offered was a $150.00 inconvenience fee. Not even close to what Ive lost. Never even received that & now they wont return calls. Talked to 5 different people at Whirlpool, including supervisors. All said they would call me back, but didnt. Keep leaving messages & they just ignore & dont call back. Still no fridge. Want my money back or a new fridge at this point.

Washer doesnt get soap out of clothes. Had tutorial from service man. Must use extra rinse every time and still have soap on dark clothes. Worst washer I have ever owned. Makes washing a lot of extra work and frustration. Have tried everything to no avail. Takes at least three times longer to wash clothes with all the steps I have to take to get soap out. I understand EPA demands for less water usage, but clothes still must be properly cleaned.

We purchased this washer in 2017, its the top loading Cabrio washer and it has been nothing but junk since day one. Purchased from RC Wiley in Boise and unfortunately did not buy the extended warranty because we trusted that this American company would make a washer that would last longer than 3 yrs. This washer barely washes clothes, leaves a residue on them since there is no agitator, also constantly gets unbalanced or gives and error of LF which means water supply issue when there isnt one. My 15 yr old about has a heart attack when he uses the quick setting and his clothes arent done in an hour and a half. Ive even resorted to turning the thing on to just rinse and spin so things get done sooner, still the stupid washer just sits. I would sell it but I dont want to pass on the pain, so its going to the dump to or to Goodwill cause its not worth the headache. Too bad you cant trust an American company to make a good product. Sad I really wanted to like this washer.

This machine is JUNK and in need of a recall!! DO NOT BUY!!! This was purchased at Lowes for nearly $800 a couple of years ago and what a waste of money. During the first year, they had to send out a tech that told me he was not familiar with top loaders and was not sure why the clothes were not getting clean, nor why they came out with a white residue on the dark clothes. We used the machine cleaner - which the cycles take nearly an hour (how is that efficient?), put in a load of dark clothes WITH NO SOAP and guess what? Then he had me dump in a gallon of vinegar to clean the tub and the wall of the washer and repeated the process and guess what? He informed me that it was just lint. Well, after several visits and using a suggested pin drop of soap, the problem remained. I finally asked him if he was so sure it was lint and not soap residue, would he be willing to taste the lint? It was soap.Obviously after an hour of washing in the efficient washer, the clothes are not getting rinsed. I know this because in just putting in less than ten dark t-shirts, they came out dry!!! He informed me that since he was a contractor for Whirlpool, he was not allowed to continue to come back as he resolved the problem that I was using too much soap! Well, that is only part of the problem. This piece of crap leaks. We not only have a water softener, but a household filter system. In just the last three months, we have replaced the hoses as they are corroding. We were informed by Lowes that the hoses that came with the washers were from China and that they have been replacing them with US made hoses to the customers at no charge due to the amount of returns. Well, those too have been corroding and now I once again have water on the floor.It cost $1.75 to take my clothes to the Laundromat, 26 minutes to wash and ten minutes to get there and back. That is what I have been doing, and using my 23 year old dryer when I get home. It is a shame that the company is not responding to an obvious problem. I only wash two loads in a week - not like I am beating the thing to death with numerous loads or heavy loads. I will not recommend, in fact, I BEG you not to spend your hard earned money on this junk. Buy a $200 washer and if it too craps out in three, four or five years... you are still ahead. You will even save money on headache medication and save your sanity.

Recently, I was having a problem with my Whirlpool gas range so I contacted the 1-800 number. Long story short, the repair cost was so high I would be better off getting a new range. But believe me, it will not be a Whirlpool.

It washes everything well except the interior of the washer. And the filter is a pain also even when we rinse the dishes beforehand. The buttons are a pain in the ** to see without all of the lights on at night.

They will not honor the extended warranty on their fridge which Ive had for less than three years which will not defrost making me lose thousands in spoiled food. Extended warranties are contracts and this company should be penalized and shut down for fraud.

Fridge residue - ED5FVGXWS07: Well, I gave it a long time and this is how they make Whirlpool refrigerators! I had a GE for 20 years and was so looking forward to this new one. What idiot designs a fridge that leaves water stains like this? And, the water falls onto the floor when refilling a water bottle plus there is no catch for the water. Argh! I really dont want to live with this for 20 years! Their resolution was to get a water softener; really?! It has a filter built in. They refused to replace the fridge.

My husband and I purchased this washer in August of 2011. Within 2 years the lid broke because of it a cheap plastic frame on a heavy glass lid. At that time I researched it and found many people with the same complaint. Whirlpool would not do anything for us but the company that we purchased it from did agree to supply the part if we paid the labor. We did this and replaced the lid. Well here it is just right at 2 years again and the lid is completely broken and the washer is unusable. There is no way to bypass the lid issue which makes the washer completely useless.I called Whirlpool again and was told there was nothing that could be done and that because there was not a recall on the product, they would not be able to do anything for me. We have purchased a new Samsung washer that received excellent reviews from Consumer reports and we will NEVER buy another Whirlpool product again. I cannot believe a company that old and as large as Whirlpool will not stand behind a faulty design and faulty made piece of equipment. It is very disappointing.

I bought a Whirlpool fridge in 2014 and started having problems a year later. It was making really loud noises and the fridge part wasnt working. All the food was warm. Of course there is no warranty on it after one year. I called a repairman and he said that the doors dont seal properly so the warm air is getting in causing condensation which freezes the engine/fan which is the cause of the loud noise. The reason why the upper fridge is warm is because the fan pushes the cold air up from the freezer, which of course wasnt working. Then I noticed that the frame at the bottom of the fridge is bending causing the freezer not to seal properly which would be the reason for warm air getting inside the fridge.

I purchased a Whirlpool top load washer that has been ruining my wasted items. My terry cloth towels all have pulls in them, knit polo shirts have pulls and holes, sheets and other items of clothing get caught and stuck under the agitator which then take a great deal of muscle power and struggle to release them. I have had the agitator replaced 3 times to no avail! Whirlpool is not willing to admit that I have a defective machine and will be sending another service repairman to try and fix the problem - this time, no charge to me after many tries and frustration. Customer service is not good unless you are lucky enough to get a supervisor who is willing to listen. We shall see what this next service call brings. I do not have high hopes and will keep you informed.

A-10 error on display ultimately means needs a new pump. The washer (model WFC7500VW 2) is 3 months, 9 days old and is now unusable. I cannot get any service (under 1-year manufacturers warranty) because the sticker inside the door with the model and serial # is missing (i.e., it was sold to me by Homedepot.com without a serial # on the door label, sticker is intact and is brand new and apparently was printed without a serial #).I made multiple calls to Whirlpool in Benton Harbor, Michigan and finally spoke with Courtney (who states she was a supervisor) pretty much said all they will do is to reprint a label from the factory and I should have it in 7-10 business days. They refuse to stand behind their product and authorize timely repair of their product they sold to my without a serial # on the door tag from the factory. I have to wait to schedule factory warranty repair until I get the new label (probably 3 weeks plus without a usable washer). Courtney refused to contact me via email for any of her contact information or to supply verification of conversation or promise of a new factory label. Also, she refused to try to authorize any type of manufacturers warranty to fix the brand new unusable washer!

I bought this stove 4 years ago from Lowes. I have had nothing but problems ever since. My family is now afraid to use the stove and Whirlpool refuses to stand behind their product. The last straw was a bill for a service call that took 6 months to complete without correcting the problem. Whirlpool sent me a bill for $100 to pay for the privileged. When I complained, WP said if I paid the invoice, they would give me a deal towards a new stove. Meanwhile, the old stove does not work and we are afraid to use it, given our experience with its reliability and safety. I plan to return it to Lowes and buy anything but a Whirlpool product. Beware of Whirlpool Maytag anything!! The customer service is shameful!!

I purchased a Whirlpool 12-gallon point-of-use water heater as a booster when I was going to get a tankless and when we decided that we didnt need a tankless, I tried to get an RA number through the manufacturer so that the store could give me credit, as it says directly on the water heater, Do not return to store. They said there is nothing that they will do and it cant be returned to the store. So, what am I supposed to do with this water heater now? Before I knew this was going to happen, I purchased a 50-gallon Whirlpool water heater as well. So now, I have the 50-gallon that I have had to replace the element for already and I have only had it for less than a month and a half, and the 12-gallon is just sitting in my garage. Im completely irritated with this company and do not recommend anyone to go with this company! This is the worst customer service!

Near the beginning of September I started having trouble with my dishwasher. I called for service to be informed it would be a week before someone would be able to see to my broken dishwasher - which of course is a long wait just for a diagnosis call so decided to call another provider to get my dishwasher fixed in a more timely manner. The repair person informed me that it was the control panel but he suggested we call Whirlpool in order to have it fixed as the part should be covered under warranty. Much to my sadness I had to call again for an appointment with Whirlpool to find out I would wait for a week for a repair person to come out even though I already knew it was the control panel and asked them to order the part right away.Sept. 13 repair man from Whirlpool affiliate comes to my house for about 10 minutes to tell me what I already knew - it was control panel and maybe 1 other part. Cost $99.00 for just 10 minutes - Wow! Then the repair person said he would order the part right away /estimated to be back Monday September 19th great! Two weeks go by we have heard nothing about our part or possible repair of our dishwasher. Call Hurst appliance to see what is happening to be informed the panel is on back order - and they have no clue when it will be available. I should call the manufacturer. Call manufacturer to be told part might possibly be available - Oct 5th - from the United States from somewhere out east in Canada. Who knows? Oct 5th comes and goes as of Monday October 11 have heard nothing about my dishwasher and when it will be repaired - phone manufacturer - by the way which is in Tennessee. What a joke!She says the part is still on backorder but that a replacement part for the back ordered part is miraculously available - she couldnt tell me when that came about, so still have no clue when my dishwasher will be fixed. They have offered to reimburse me the $99.00 service call, but seriously should it take over 6 weeks to have your dishwasher fixed. I still have no clue how long it will take for the part to get here and installed. For 2 cents I would return all my KitchenAid appliances but especially my dishwasher. $99.00 does not appease me. I would like them to cover the labour to fix my dishwasher or a new dishwasher. What garbage and asked to talk to someone higher than the supervisor Gabby of the customer service dept. and was told she is the highest person in Whirlpool I could talk to - thats a joke. Shame on Whirlpool!

It has needed a new motor, new tub assembly, and about six other repairs. Now the heavy duty tub just thumps around and I get an uneven load message, even when running empty. It is the worst single machine I have ever purchased, with the possible exception of the Whirlpool matching dryer, which lasted about three years.