Not completely happy with my purchase of the Whirlpool Gold Series refrigerator I just paid off this month. Have had the refrigerator for one year. To be as large as it is, it really doesnt seem to be able to hold that much food. The refrigerator is on the top and the freezer is on the bottom. We began having issues with the ice in the ice maker becoming frozen together and forming clumps of ice. The ice felt damp to the touch rather than feeling completely frozen. We called the manufacturer and they said to be sure the vents in the freezer section were not blocked by food. So you have to be sure to load the freezer so that food doesnt block the vents. Additionally, when filling your glass with ice from the door, unless you are EXTREMELY careful, all of the ice will not go into the glass but spill out onto the floor. Weve had the refrigerator for one year and I still have ice coming out that doesnt make it into the glass. It is not user friendly at all. One last thing - the refrigerator has double doors and to get to the section of the middle pull out drawer, you have to open both of the double doors, letting out a lot of the cold air. For the expense of this particular refrigerator I would not recommend purchasing it. My last refrigerator was a Whirlpool as well. It lasted 17 years and I was very happy with it. This Gold Series was supposed to be a step up, but I feel it was a step down.

Have had Refrigerator less than two years and the evaporator seal is leaking and all the Freon is gone causing the freezer and ice maker to quit. Will cost $700 to repair. Found out it is a known defect with Whirlpool. Called Whirlpool for reimbursement and they refused, saying they do not know anything about this issue. This is interesting since it is all over the Web with complaints. I have been a customer of Whirlpool for 20 years and they have lost me and everyone else I know.

My oven was 11 months old when I tried to use the self-clean cycle for the first time. 2 hours into the 4 hour cycle, the oven completely shut down, door locked shut and no lights on the control panel. The repair tech came out on a warranty repair call (no charge), explained that Whirlpool does not use a thermal protector rated for a self-cleaning oven and that it blows every time. He then proceeded to replace it with the same thing because he is only allowed to put in the recommended part, which is not rated for the high temp cleaning cycle. So the oven is usable, but not the self-clean. Since I am at the end of the 1 yr warranty period, even if I were able to get Whirlpool to replace the oven (ha!) there would be no warranty because I only get the original time limit. So if I had a new oven and it blew out, it would not be under warranty for fix/replace. The repair tech said this is a COMMON problem with Whirlpool self-clean.

The pilot light on our hot water heater will not stay lit. We cant find the custom made Replacement Kit at any local retail locations, including a specialty appliance repair store, Lowe’s or Home Depot. So our only option seems to be waiting for the part to come in the mail. Meanwhile, my two little girls have no hot water in their home! Not because we couldnt afford to pay the gas bill, but because of the piece of junk hot water heater that we purchased and the lousy company that stands behind it!

The unit I live in is at **. They purchased it in Nov 2011. The washing machine worked for 2 months. Now, it has to be dismantled at my home and take a day off. I would like a replacement. The Dutchgate is still being developed. They purchased at least 60 at this point, there is no reason not to give me a new one instead of having two techs dismantle the machine in my new home for 4 hours and a day off of work. Model WFC7500VWl, serial CD13528709. Please try to assist me.

My parents bought a Whirlpool refrigerator that makes a strange noise, an intermittent clicking. Sometimes it goes on for hours. It is neither the ice maker, nor the compressor. I contacted Whirlpool, they said it is normal. It is not normal. I have a twenty-year-old refrigerator far quieter than this brand new, $2600 noisemaker that keeps things cold.

2020 Maytag washing machine purchased Sept. 19 2020, never worked from day one. Agitator does not work, makes noise like the machine is struggling to work. Does not rinse detergent out of clothes. Water level is minimal. Went to the dealer Dufresne in Swan River, MB. They sent out a repairman which I paid for, I was informed many customers were complaining that these machines are nothing but garbage. I went back to Dufresne and confronted the sales woman, laughed in my face and told me to leave the store, I was totally taken aback by her rudeness, phoned Whirlpool, spoke to a woman who was very ignorant, I asked to speak to a supervisor who told me thats the way the machines are designed because they are made, DO NOT BUY WHIRLPOOL APPLIANCES, NEVER NEVER.

I have a new Duet Washer and it is a nightmare. It keeps throwing the same F8 E1 code. The repair people have replaced five parts and been out four times. I feel like I have been scammed out of $900. I will never purchase a Whirlpool again ever!

We purchased a Whirlpool Cabrio, top load washing machine WTW6600SW back in 11/07. Last week (todays date is 8/19/11), the machine sounded like a plane taking off when it spins out. When the local service technician came out this week, he said that the bearings are shot. Since the tub and bearings are all one part, we were told by the technician that the part and labor costs would be $379.99 to repair it. We originally paid $799.00 for the Cabrio, less than four years ago. Whirlpool would not even give us a concession of a new tub and bearing part as it was out of the 1 year warranty.

We purchased this model in July of 2019 and have had nothing but problems with it since. The design is really bad - if you set the temperature on the ideal setting, everything on the top shelf freezes solid. If you reduce the setting to the one below ideal, your freezer doesnt get cold enough to keep ice cream hard. The ice cubes are a little more than half the size of our last Whirlpool refrigerator and the unit is noisy. Weve had Whirlpool out to work on it 4 or 5 times in the first 6 months and twice weve had to throw away food due to the unit not cycling on and off properly. One of the technicians told us he spends a lot of time working on this particular model - evidently, it has a lot of issues. We are now using our old garage refrigerator while we try to get Lowes to give us a refund on this piece of junk.

I have the same issue with cooking time on my Whirlpool wall oven (WFE54OHOES). Bought it in January and have not yet had a single recipe come out cooked. Outside is crisp, inside uncooked, after twice the amount of time it used to take. Its still under warranty. Service came out and told me to bake differently. Thats an answer for you. I am going to pursue this issue with Best Buy where we purchased it.

Its supposed to be energy efficient yet it takes AT LEAST two times as long to get one load done, regardless of size or cycle preference! Now laundry takes all day! Literally! And why is there a lid lockout? Did someone accidentally fall in? If I drop something after Ive pushed start, I have to wait until the machine unlocks the lid. Why? This seems counterproductive. Its a top loader!

In less than 4 years the top lid broke at a poorly designed hinge point (+$200). Cabrio washer mercilessly tangles/twists clothes; HE does not totally rinse all detergent from clothing necessitating extra rinse (so much for efficiency); now at 4 year point bearing has gone and machine sounds like a freight train (+$250). Do not recommend this item if this what to look forward to. Called Whirlpool initially about tangling/twisting problem and just got lip service about arranging clothes. Duh, did that already.

Recently bought a 19-cubic ft French Door Whirlpool refrigerator. Seems to work fine at this point, but the compressor/cooling system has a fairly loud swishing noise it makes off and on during the cooling cycle. According to the owners manual, this is normal. If I had known this, I would not have bought this brand. Believe me, it is loud and you can hear it from all parts of my apartment. Also, once you examine the fridge up close, it really is cheaply made. Low-grade plastics for shelves and compartments. And this was not an inexpensive product to buy. We are talking out the door paying $2,000. Sad it is American made. My parents bought a Samsung last year and it is of much higher quality than the Whirlpool I have. But so far, it is keeping the food cold. Just wish it was quiet.

Purchased the matching set. Have had four years and need my second service on the machine for issues. It is a top loader and does a good job but the tub is very deep and not made for short people with a few delicate items cuz they are hard to retrieve. I have to use tongs to get them out.

Freezer side went out on model# ed5kvexvl00. Fridge is less than 2 yr old. Didnt expect anything to go wrong so quick. The extended warranty, I did not purchase. Replaced relay switch - no changes in problem... Contact them (Whirlpool) and like every else, got nowhere with them. 3 weeks and no fridge... Hopefully the compressor is not bad. Will find out soon. I will be researching before I select new appliances in the future. They need to be ashamed of themselves.

This is a good customer service (CS) review. Whirlpool knows about the defect and continues to distribute the fridge this way. We have a Whirlpool model #WRF757SDEM01 we purchased this year (2017). We love the size and the fact that the ice bin is in the door and takes up very little room. Our only complaint prior to this issue was the ice and water do not always come out gracefully. So we were happy overall till a large block of ice formed in the back of the fridge. My original call to CS was great. They did not ask me a bunch of stupid questions, just said that should not be happening and scheduled a service call.Service guy knew exactly what it was because he had repaired the same model with the same issue several times. It is a defect in the dual cooling/defrost system that Whirlpool knows about, but continues to produce. Two parts need to be replaced and one part had to be ordered. Which was not a big deal since two days were needed to thaw out the mini glacier. We lost food so I made a second call to CS and again there were no stupid questions or arguments. They got a $75 debit card in the mail to us. So I thank Whirlpools CS reps, but sure wish the manufacturing side of things were a little more diligent in production. Certainly this cost them money on all accounts.

Have a Whirlpool side-by-side with water and ice dispenser on the door. It has lasted over 20 years. It has a large ice maker which makes more than enough ice and it has never broken. Since it is older it does not have gallon depth shelves on the door, but I have never missed not having them there is plenty of internal shelf space.

The electric Whirlpool double oven range seemed like a good choice for a single person. I bought it in 2016 around the same time I had some personal setbacks. After finding my emotional equilibrium I decided to return to my much loved baking. While I have no other complaints on this range the ovens are a problem for baking. The digital oven temperature readout doesnt reflect temperature fluctuations in the ovens. Once you enter your desired baking temp the readout never changes even after you open and close the oven door say to take out cookies. Given some of my poor results I suspect even when Im not opening and closing the oven door the temperature is not maintained. I was going to get an oven thermometer but the user manual says it wont reflect an accurate temperature due to way the elements cycle to provide a consistent temperature. Ha! If you want to bake this is not the range for you. My inconsistent results and too often wasted ingredients frustrate me no end.

We bought our new Cabrio (washer and dryer) in the fall. Within 2 weeks, I realized what a piece of crap these machines are. They simply do not clean the clothes. I have complained to the store where we purchased them, and I was told there is nothing they could do as the machines are performing as designed? Im waiting for a class action suit to join to get rid of this junk. Curt

We purchased a 50 gallon water heater in 2005. In 2008, the thermocoupling unit went out and Whirlpool sent us the replacement part and we had a plumper install the piece (at our expense, of course).Now, we are running into the exact same problem 3 years later with the pilot light not staying lit. We had a plumber come out this weekend and replace the part but unfortunately this time, its not fixing the problem. The plumber charged us $178. He said that he can replace the thermostat on the water heater but that would cost us close to $400 to replace and makes no sense to do since purchasing a new one wouldnt be much more than that. I am so frustrated with this water heater; I just want to throw it out in the middle of the street! We still have 3 years left on our warranty too. I have 2 very young daughters who need to take baths, and who also dirty up quite a bit of clothes that need to be washed in warm water. What a nightmare! Whirlpool, help us!

My model - GB9FHDXWD06 - is one of only a very few that fits our space. However, it has failed three times in 5 years: 1) A faulty defrost drain tube that was replaced under warranty, 2) A jammed vent flap that caused the freezer to fail, and 3) a burned-out control panel (an expensive repair). It is also annoyingly noisy and middling at energy efficiency. The coils are in a very narrow space below the refrigerator, which makes them a bear to clean. And, the plastic front plate that must be removed for cleaning breaks far too easily.On the good side, it is a bottom freezer model (which is far better for convenience), the space-wasting ice maker was very easy to remove, the glass shelves, removable baskets, and drawers are easy to clean, and the auto-defrost works very well (after the recall update, number one, above). Temperature uniformity is good and the freezer maintains below 0° very well. Overall, it is a good looking appliance with mediocre efficiency and poor reliability. Not recommended.

WHIRLPOOL MICROWAVE HAS HAD MAGNETRON GO BAD 3 TIMES IN 1-1/2 YRS! I bought a Whirlpool Microwave Hood Combo Oct 2009. July 2010 the magnetron went in it! December 2010 the magnetron went in it AGAIN! This time we had to pay the labor to have it repaired because it was 2 months outside the warranty period. We did not want to pay because we knew having the same part go twice in one year that something is wrong with it. Whirlpool told us that if it happened a 3rd time that they would most likely replace the appliance for us. Well....July 2011 the magnetron went AGAIN for the 3rd time! Whirlpool told us to take it to a licensed shop to have it diagnosed to prove that it was the same part as the previous two times, fax paperwork from the prior two times, and have the shop call in the diagnosis of the 3rd time. We did all that, and they told us they wouldnt do ANYTHING for us because it was outside of the warranty period! Well they knew that when they told us we had an opportunity to get it replaced! THE SAME PART WENT BAD 3 TIMES IN A 1-1/2 YR PERIOD OF TIME. We trusted that the Whirlpool representatives were being honest with us during those phone conversations. Whirlpool can not explain why representatives would give us hope of a replacement (although each conversation is documented by their login and employee ID number). So not only did I buy a brand new MSRP $619 microwave, I paid to have it repaired the 2nd time, and to have it diagnosed the 3rd time, uninstalled and reinstalled the microwave each time, the inconvenience of not having use of the appliance during each occurance, and the unbearable suffering of calling in to customer service and repeating the story over and over to each representative. My house is brand new (we moved in to it November 2009); we bought ALL our appliances from Whirlpool. All I get for an answer now is sorry. That doesnt help me any financially having to repair and now replace an appliance that has been in use for only 1-1/2 yrs! I have seen $39 microwaves from WalMart last several years, so what is wrong with Whirlpools manufacturing?! Customer Service is unreliable, untrustworthy, non-sympathetic, and insanely frustrating! My question for Whirlpool is...why cant you make a product that lasts better (better quality=longer life=healthier environment and happier customers)? Why cant you stand behind your products better? Dont you care about the impact youre making on us emotionally, financially, and environmentally? The model # is GMH6185XVS0 Serial # is TRY3111264.

When the fridge is running and there is a power loss of about a second or so, the fridge shuts down and will not restart (even after hours). I have to unplug it for a minute or so then plug it back in; it runs fine until the next very short power failure. When we are out of town for a few days and that happens, we come home to a fridge of ruined food and a mess. I have contacted Whirlpool (2 times) and they were no help at all. It seems to me a software change could solve the problem, but they are unwilling to listen.

I bought a Whirlpool water heater in 2009. I paid $588.46 at Lowes. Turns out it is in a class action lawsuit for faulty thermocouple. I was given a coupon from Whirlpool for 2 new thermocouples as part of the class action lawsuit. The thermocouple goes out on it every 1-3 months. You never know when youre going to have a cold shower getting ready for work in the morning. I literally could have bought a new water heater for what Ive spent on thermocouples the last few years. The last two times it went out, I had to replace it twice within 1 day. Im sick of replacing it and have decided to install a new hot water heater. I am disgusted with Whirlpool and tried to contact them about it but have gotten no response. I will never buy another Whirlpool product and would not recommend them to anyone!

This washing machine has been the worst machine I have ever owned - I have called Paddys Market on several occasions to have a repairman come out and take a look at this machine, which they did - but the machine never got any better - it has never ever washed my clothes properly its a piece of garbage - clothes come out dirtier than when they went in and sometimes come out dry. Its so busy trying to save water - it doesnt use hardly any - and forget doing bigger loads - I WILL NEVER BUY ANOTHER WHIRLPOOL product again.

I like this refrigerator. Its a two door. I did not get an icemaker and I have plenty of freezer room. The milk will stay fresh at least for a month. I like the crispers. They keep my food fresh. It keeped the Romain lettuce very fresh on the package, it was pick 7/31/2019 and just have a fresh green Salad Sept 6, 2019. Easy to move when wanting to clean the floor.

My new fridge is leaking large amounts of water on the floor, but it is not from the ice maker, as it is not hooked up. I have a Whirlpool refrigerator, model number GB2FHDXWS04, purchased in August of 2010. It was with good faith that I chose what I thought was a high-quality product, as well as, it was chosen because it was made in the USA and would be supporting US families, not China.Within one year, just as soon as the one-year warranty expired it began leaking water daily, all over my wooden kitchen floor, causing the floor boards to begin buckling. It is not from the ice maker, as it is not hooked up. Not only is my floor being ruined, but my one-year old refrigerator is not working up to standards, for which I chose the Whirlpool brand. My refrigerator has been maintained and operated by all instructions provided for this product.I assume that this company no longer wants to be in good standing with its customers, and refuses to make good on a major problem, for which a large amount of money was spent on a high quality serviceable item, by paying for the repair or replacement of obviously defective parts, or by the replacement of the entire refrigerator.

I recently purchased the Whirlpool Cabrio washer and it is the worst product ever!! It does not wash the clothes, it tangles it in knots and has ruined all of my clothes because it leaves holes in the clothing. I have had multiple service calls and all of the diagnostics check out. It is a horrible product that should be recalled and Whirlpool customer service does not stand by their product. Their supervisors and customer service is very rude and I will never purchase another Whirlpool product!!! I plan on posting my complaint everywhere possible.

On 1/24/12, I replaced a 15 year old water heater that had started to leak after years of faithful service. The new Whirlpool unit heated water to a tepid level only, and that was obtainable only after running several faucets at a time, full bore. I used the product manual to trouble-shoot and was unable to find the problem, so I called Whirlpool customer service and was told that I would need to have a plumber come and and inspect the plumbing before a technician could be sent to check the water heater. I was not very happy about that, but complied. The next day, a plumber inspected the lines and fittings, tested the pressure and agreed that the problem was likely a faulty water heater. That cost me $95.00. I called Whirlpool again. This time, I was told that I should have had the plumber call Whirlpool while he was still at my home! The customer service representative agreed to authorize a service call, and I was given the phone numbers of three companies to choose from. Apparently, I chose wrong. The plumber seemed experienced and was very friendly. He was at our home for about 40 minutes, made a cursory inspection and said the problem did indeed seem to be with the unit, and he would return to his office to contact Whirlpool and arrange for a replacement unit and he would call back. Tellingly, I realize in retrospect, he did not give me a receipt. After several hours, I called the company and was told Whirlpool had not yet called them, and if I did not hear from them soon, I should call Whirlpool myself. This seemed reasonable to me, and I did so, at which point I realized I had been lied to from the start. The Whirlpool representative said that the service technician stated that he had run an isolation test, obtained hot water from the water heater, advised the homeowner (me) that the problem was in the plumbing, and I possibly had crossed lines. She also told me that the technician had said that he had difficulty making the homeowner understand what he was trying to explain. A complete and utter falsehood. I asked her how an isolation test was carried out, and that I would call the plumber to see what was going on, as this was not what we had been told. I was livid and called the plumbing company back just in case there was some honest mistake. Of course, there wasnt. I would like Whirlpool to be made aware that the company that they contract with is disreputable and has a history of deceitful practices. I found many negative reviews, and in fact the sort of treatment I received seems to be their modus operandi, no receipt, never a call back, assure the customer their problem will be covered under warranty, misrepresent the the service performed. The reason I add this last statement is that at no time was the new water heater disconnected, drained, refilled and allowed to return to operating temperature; the so-called isolation test a process which Whirlpool told me takes about two hours. This test did not take place. I previously stated that the technician was only at our home for forty minutes. There was no test of water temperature. I have since replaced my water heater with another brand--it works fine and there were no plumbing problems! I thought the name Whirlpool meant something. I have owned quite a few Whirlpool appliances over the years, in fact my new washing machine is Whirlpool. But I am definitely disinclined to purchase this brand again. I am so disappointed with the service I received from Whirlpool, a huge waste of time and money, and I am out $95.00 for nothing. I think Whirlpool should reimburse me for this, as the original (honest) plumber was correct. My water heater was defective and should have been replaced at that time. If it had been, you would probably still have a customer.

We have had the same problem with the magnetron in our Whirlpool Microwave Hood Combination. Replaced this part in Dec. 2012 after warranty expired. Cost of repair was nearly cost of microwave. Magnetron went out a second time this week. When I called Whirlpool customer service, the management rep was very hard line about the warranty on the unit and parts. Very clear this company has a product reliability issue and does not want to keep its customers. I dont plan to purchase another Whirlpool product ever. What a frustrating disappointment!

Size was greatest consideration, then cost. Next was power consumption. Quality claims were of no value, since ALL are made in China/Korea. Korean made would be a better choice than China. Am satisfied, but not greatly, as refrig. bottom freezer died a few days out of warranty. YouTube video had my exact refrig. so fixed it myself. Bottom freezer drawer keeps coming off its slides, but I live with it. Top refrig. section freezes things on top shelf, but 2 and 3 shelves down, temp is 39 to 42 = cannot get even temp. As a former inspector, I know about air circulation, crowding.

This is a replacement of a similar model, that lasted 23 years. This modest, white, 2 door, side by side refrigerator, was purchased without the optional ice maker. It was bought specifically for the dimensions, of our custom cabinets. There are obvious differences, from the previous incarnation. The textured doors were replaced with a smooth glossy finish and their height extends higher than the refrigerator cabinet. The adjustable shelves were replaced with less adjustable pre fixed shelf supports. The LED interior lighting is much brighter that the incandescent bulbs they replaced. Overall, so far a very capable refrigerator, for a moderately sized kitchen and if the life, lasts as long as the one it replaced, this was a very good purchase.

Today I had the unfortunate experience to have to deal with Whirlpool customer service and claims. I WILL NEVER BUY ANOTHER WHIRLPOOL PRODUCT again! My refrigerator, that was purchased in 2013, has a door misalignment problem. It is a known problem with Whirlpool (service pointer W107317828). My refrigerator serial number and model number are affected. Because I am outside the one year warranty, Whirlpool refuses to provide service that is required to fix this known issue with my model/serial number. After having to talk to four supervisors the only resolution that was given was that they would cover the cost of the 7/16 hex nut ($4.33). Dont get me wrong I do appreciate the offer.The two supervisors that were below her assured me that no one can do anything to assist me further. The attitude of the second and third supervisor was pathetic. After over a hour on the phone I was so disappointed that I could not take it further. The cost that we are talking about that I am asking them to pay is $154.28. I am very disappointed. They say they stand by their product. To me standing by your product means that you will fix or replace any known issue. $154.28. I hope it is worth it to you Whirlpool. You lost a long time customer.

Warranty services are trouble. For one (1) simple washer part its taking over 2 months. They state its on back order...while my food is wasting away. Whirlpool didnt even know what he was doing, and to the top it off, forgot to put back the part he took off!

I purchased a 50 Gal. Whirlpool gas water heater on Saturday, 12/31 to replace a 20-yr old unit that had failed. The unit was installed that day and it started right up but I noticed the burner had gone out about an hour later and the status light indicated FV Sensor Lockout. I tried calling Whirlpool but their customer service was closed. I tried troubleshooting myself using manuals and Internet forums without success. Everything I could find indicated that an FV Sensor failure could not be repaired and would require replacement parts. I called Lowes and was told they could not help me and I would need to talk to Whirlpool.I called Whirlpool again Sunday, 1/1, but they were closed again for the Holiday. I called two plumbers and both told me that the Whirlpool units were problematic and that if they did come out, there would be little they could do except charge me a lot of money and recommend parts to order as Whirlpool does not let them stock parts. Both plumbers also suggested that I consider buying another brand.So I went to Home Depot and purchased another brand with similar specs. I installed it that day and it fired up right away and has been running fine ever since.I talked to Whirlpool on Monday, 1/2, and they told me they would not issue an RMA for a unit that they considered usable. They also told me there was an FV Sensor reset procedure that they would have walked me through had I been able to talk to them that would have bypassed the sensor until a replacement could be installed. I told them that if they would publish this procedure in their manuals or on the Internet, I would have certainly done that. Im now fighting with both Whirlpool and Lowes to get a resolution to this problem. Im not sure about other Whirlpool products but their Water heaters seem to be very problematic.

From the beginning, we were not really happy with the performance of the machine, which we felt was not cleaning as well as it should. Now it doesnt take the soap at all. The washing process goes on perfectly but without soap, so the dishes remain dirty.

We purchased a front loader Duet in August of 2011. It is now January 2013 and we had to have a service person come out. We did not buy the extended warranty because a washer should last longer than 1 year 5 months, but not ours! We need to have the drum replaced at $600. Are you kidding me! I will never buy another Whirlpool product.

I purchased a washer and dryer from WHirlpool in March of 2019 based on the good word of mouth information I have heard from others. Today I reported to WHirlpool customer service how all my brand new towels were destroyed during the week of 9/8/2019. The towels were purchased on 9/3/2019 and are now unusable due to a defect from the washing machine. I called into the customer service to ask what they can do, they completely refused to cover the cost in any way. Original cost was $448.00.

My washer is a top load, energy and water efficient model. I am amazed at how little water it uses and how well it cleans. I do have two issues, the capacity looks huge but it will not take a queen size and double sheet set in the same load. It unbalances and then cant seem to get going again. The other issue is that you cant pause the wash and adjust things, you have to cancel and start over.

We purchased a brand new stainless steel refrigerator in 2013. Our 2 year refrigerator stopped producing ice and the freezer stopped working as well. We called Whirlpool customer service and they said they could not help due to 1 year manufacturer warranty only. We called another company (SoBellas) that charged us $85 to tell us that it is the seal system which should be covered up to 5 years by Whirlpool. The man showed me the Whirlpool refrigerator warranty on Google which states the sealed refrigeration parts are covered up to 5 years. There was no specific model numbers listed which gave me the impression this was a standard warranty for all Whirlpool refrigerators. I explained the situation to Whirlpool customer service including the 5 year warranty that is found on Google for everyone to see. I was told that our refrigerator model number did not qualify for that specific warranty. We ended up having to buy extended warranty for $350 on top of the $85 we already spent. This started July 24, we had to wait until August 10 for Whirlpools warranty company to see us. They checked it and said they had to order parts but he supposedly tweaked it to make our fridge run better.... It made it worse and it ended up completely breaking down. We had to buy ice chest and waited until Thursday August 27th for them to finally come back with parts and fix the refrigerator. I took time off from work once again due to our time slot being between 3 and 5 but the guy didnt even show up until 7:30. I could have worked my normal hours instead of taking more time off! The guy never once called to inform us that he was running late. We kept calling the company to make sure we werent forgotten. The guy told us that everything should be working within 20 hours or so, by Friday our freezer was still not working and no ice either, back to square one! I called Whirlpool customer service once again to explain the situation, nothing could be done. The next available time for them to come back out is September 17 for them to come look at our refrigerator. We have been stuck without ice and a freezer, buying food every other day waiting for our brand new, horrible Whirlpool refrigerator to be fixed. Will never ever buy Whirlpool brand again! Actually, we purchased all brand new Whirlpool appliances... Good luck to us!!!!!

I recently purchased a Whirlpool over the range microwave. I especially appreciate the unit's strong exhaust fan. My previous microwave's exhaust fan was much less powerful. The unit's black glass and chrome trim look great! I am extremely pleased with the new microwave.

I bought a new home from DR Horton with Whirlpool appliances. All of the kitchen appliances were Whirlpool which came with a 1 year warranty. After closing on the house and getting in, started the dishwasher for the first time, it started leaking water instantly from the bottom of the unit and spilled all over the floor. Tried to contact the builder/inspector who asked us to contact Whirlpool. Called Whirlpool and I was kept on hold for over an hour before someone answered. The rep was so adamant talking all unrelated things and said that she cannot do anything for another 15 days. After escalating to the supervisor, it was the same response. The service at customer care is so bad with no fix in sight. I am not sure what they are going to do with the appliance and not sure whether they come and fix it or keep me waiting. Very unethical, the way they talk to the customers.

I have a Whirlpool washing machine that have problem in dryer and drainage. I have registered my problem on 17 December and my SR number is DL 1211015017, but to date, the problem will not shout out. Its poorest response from your side. My machine is in warranty period.

If you want clean clothes dont buy this machine(Cabrio Washer)! First of all I find that my clothes have dry spot on them when I pull them out of the machine. Whirlpools response is that the machine spins at such a high rate that the cloth will actually seem dry. Doesnt make sense to me that a shirt that has another garment on top of it gets dry in an unexposed area. I have also been told to always use the high water setting. This helps but the clothes still are not clean. Also my dark slacks come out with residue lines on them - Whirlpools solution; never wash anything in cold water. In addition the machine is very noisy. It sounds like the water pipes are being kicked out of the wall. And forget about washing a king size comforter as advertised, a twin comforter doesnt get clean or even thoroughly wet and residue lines are left behind. Hate this machine! So glad I didnt buy the extended warranty since my attempts to have them stand behind this product have failed. I feel the money would be better used towards a different brand.

I bought a Whirlpool Cabrio Platinum washer 2 years ago and it is by far the worst washer I have ever owned. Its a water saving device with extremely long cycles. The clothes dont get wet enough, dont come out clean and they do not smell fresh. I have to put them through 3 rinse cycles and often times have to re-wash my clothing. The cycles are very long, using more electricity, and it takes me 3 times as long to get my weekly laundry done. My clothing comes out more wrinkled and twisted causing longer time ironing. My old agitator style washer did a superior job compared to this piece of junk. I dont like the automatic locking lid, nor do I like the machine choosing the spin cycle for me. There isnt even a soak cycle. If I want to soak my things I have to do it in the sink and then drag them to the washer to rinse and spin them.I spend a fortune on laundry additives in order to get my clothing clean and then they arent as clean as with my old washer. I now dread doing laundry and every time I look at the washer I feel like taking it to the dump! There isnt anything I like about this machine and I wouldnt recommend it to anyone. It is a piece of crap. This is 2016 and they havent learned how to make a good working washing machine. When I move, I will be celebrating leaving it here! I will never, ever buy a product made by them again.

Whirlpool Gold Bottom Mounted Freezer - I advised Whirlpool that the refrigerator has two design flaws... one that makes the drain freeze up and even more importantly what is involved in correcting the problem. They replied that they were unaware of the issue when its all over the internet and has been for well over a year... maybe more. I sent them a couple pages of internet links and they said they would advise their engineers. As they have done with others, they suggested I should have gotten the extended warranty but that hardly addresses the problem(s).

We purchased our Whirlpool Refrigerator, oven, and microwave a little more than a year ago. Not a single negative event with any of these products and my wife and I wholeheartedly recommend Whirlpool for operation and last ability, unlike the products we replaced them with.

This is a portable dishwasher with a butcher block top. Great to use as a rolling island countertop. The capacity is huge, fitting large pasta pots and dutch ovens with ease along with dish plates. Love the water miser setting and the no heat dry to protect delicate material like china dishware.

Our Whirlpool water heater needs a burner assembly replaced. Second time within the warranty period of six years. Parts have to be ordered, so you will be without hot water for several days to a week. The worst part is reaching them. Between my wife and I, we have almost 4 hours invested in sitting on hold waiting for someone in three different calls. They never answer the phone. They give an option to call back. They never call back. Im so frustrated. No Whirlpool products ever again. Im sitting at my desk, hoping someone will eventually answer the Whirlpool line. I dont even have the part ordered yet after two days of no hot water. Who knows how many more hours I will need to sit here and listen to this music on hold. It is incredible in 2021 a company can remain open while offering this kind of customer experience.

I purchased a Whirlpool classic range model number rf263LXTS0 on January 2010. We had some hang-ups on the kitchen renovation and were not able to install the appliances until May of 2011.I used the cooktop that evening and was very pleased. I then went to use the oven 2 weeks later and it did not heat up. I asked the contractor to check things out (maybe it was something minor that he could fix). He checked the things that he installed and everything on his end was working fine, so he told me to call Whirlpool.A service technician came out and, within 10 minutes, said that the oven controls were defective.I paid $450.00 for the oven originally. The service technician charged me $136.74 for 10 minutes to tell me that the oven control needed to be replaced (that is the major part of the oven) and that it would cost me $318.41 to replace the part.I called Whirlpool and explained my circumstance and Paula, the supervisor from Tennessee, said that there was nothing she could do. I told her that even if I installed the oven back in January of 2010, the major part of the oven should last more than 1 and 1/2 years.What terrible craftsmanship and crappy customer service. It is sad that customer service cant stand by their product and Whirlpool has to rely on making their money on repairing defectives products. I now have to go out and buy a new oven. I also buy a lot of appliances in my business and I will never buy a Whirlpool again.

UL code displayed for six months. Will not spin. Makes a squeaking noise. Recently noticed a black greasy residue around the machine. The bottom of the machine is covered with it. Have had the Cabrio for 5 years. Seems like a bearings issue. Expensive machine. Whirlpool said there are no reported issues with my model even though there are thousands of people on several websites who are having the same issues. Apparently, Whirlpool is in denial and not willing to save face with consumers and correct a horrible washing machine. Definitely will never purchase another Whirlpool appliance.

Whirlpool cabrio washing machine is 3 years old and the bottom leaks heavy bearing oil everywhere. I now see it is a common complaint and the seal was incorrectly installed by the manufacturing plant. They should be forced to offer a recall and they should stand behind their product. I will never buy whirlpool again. I see thousands of complaints online.

I contacted Whirlpool on 3 separate occasions. Each time they told me to have the plumber call them so that they could determine what the problem was. Each time he was able to get the water heater going again, but it would only operate for about 3 months and then it would go out again. To date, I have incurred $245.00 in plumbers service fees. My last call to Whirlpool was on 5/14/2013. This water heater was purchased on 1/25/2010 at Lowes in Evans, GA. It went out over the weekend, but the plumber was able to relight it. When I called Whirlpool on the 14th of May, I was told since it was working now, there was nothing they could do. I am tired of dealing with this issue. They wont stand behind their product.

I purchased a Whirlpool Cabrio Washer WTW6200 & this yr purchased a newer dryer w/ steam capability. I wish I would have waited a couple months for a new washer that yr and purchased the one with no agitator inside! But my washer died that day & I needed one & NO ONE informed us of the changes or problems of this agitator at the time of purchase. I have had this service several times my first year and the agitator replaced I believe twice. But it still destroys clothing. I called 1 month out of warranty and even though they had been out several times the first year for the same issue, they would not help me! Yep, even after the 1st year they said to get things done I had to purchase an extended warranty even though this was a mfr issue no doubt! So, 3-4 years later I still am dealing with the very same issue over and over with NO RESOLUTION in site and $900 in the hole for this washer and I am losing money with clothing damage weekly!Even today I had two pair of jeans, $98 ea rec these terrible uniformed marks all across the legs making them unwearable! At least for where they were intended to wear them at. They are now yard jeans...yep $98 expensive yard jeans now!!! These were my good jeans which I cant afford to buy more nor replace them so I have to do without. We cant wash anything with strings such as hoodies, shirts or baby clothing with spaghetti straps or little dangle things; we have to use the laundry mat and come home & dry w/ my Cabrio steam dryer which I love. Most everything I have to use zipper net bags but even then things still can get destroyed, especially if a hole gets torn in the bag from the wings of the agitator as you will see in the below photograph. I currently have & own an expensive washer I purchased from HHGregg by Whirlpool replacing a previous whirlpool I owned for 22 years! Yep, Im wishing I had it back & put the $200 some needed to repair it! Please Whirlpool will you please do something & make this right once and for all. I dont have $900 for another washer. I just want to be able to use my washer without it destroying everything I own. I have darn photos of what this is doing and you wouldnt believe it. It took us an hour, yes an hour to untangle a top that became entangled in the flaps on the agitator. This is the worst design I have ever seen and needs to be recalled once and for all and either fixed or replaced with new machines of equal model with the agitation issues resolved or removed & with no issues or further costs to your customers! Why would you honestly believe that an agitator with wings coming off the bottom that are not attached to the bottom would serve some type of positive purpose in cleaning clothing? All it is doing is tearing them to shreds, tangling them up, doing things to hoodies which make them unrecognizable after ripping the cords so hard out of the hoodies that Ive seen them shred the material across the collar area and opening of the cording completely ruining hoodies ranging from $35-$75 a piece even after placing them in mesh bags! Why did we keep placing hoodies in the machine? Well with 4 children at times they just dont listen or get all the info as to what is going on with the machine as 3 were college kids coming home periodically & yes, to do their laundry. Look, lets talk straight. You as a company from what I have learned from appliance salesmen locally and regionally, you knew this was wrong and knew this was your last ditch effort of an agitator before you knowingly knew you were going to an agitator-less unit on your washing machines & already had one ready to go out on the floors. I know that you Whirlpool CEOs knew this unit was a bad call but chose to ignore it. You had to know it because there was no way this could have passed quality control. It had to have failed sometime in its trials showing you the issues of the wings. Unless you never did any quality control on this unit and just rushed it through? Please to the CEOs of Whirlpool, I am asking you to make this right if not for good standing of your company do it at least for families like myself who cant afford to buy another machine and are now stuck with NEW machines yet going to Laundry mats. This was to be my last washing machine I would buy hopefully. I am 54 and was not planning on buying another. How do you think this makes your company look???? Im just so tired of dealing w/ Whirlpool to only hear I have to purchase a $400 extended warranty with no guarantee that they will fix the issue. If an attorney wants to step in & believes they can help us and maybe others then Yes please help us because this is absolutely ridiculous and is a product that needs to be recalled. We are out so much money now and like I said we are to the point we cant purchase another washer. We had to purchase all new appliances as they all began going bad around the same time.

I bought a Whirlpool Cabrio Top Load washing machine September of 2012. It has never cleaned the clothes well. For the last month the machine has a very loud spin cycle. I am very unhappy with this purchase and it is 2 months out of warranty. I emailed WHIRLPOOL and was told that all appliances have problems and wear out. WOW! It is 14 months old and has been used with care. I will never buy another Whirlpool product.

Its a very good one, it kept my stuff cold, and fresh when my other fridge went on the Fritz, but only one problem, and that is, it has glass shelves and if you have kids, it’s hard to keep clean!

First one had major problems. The bladder they call it. They took out the whole system out, replaced the tube that goes to the top of the refrigerator which is where it always starts leaking so they worked on it three times, junked it, gave me a new one and here I am again same thing. Ruined my hardwood floor and Im stuck with it. Never again will I buy WHIRLPOOL.

Lasted a whole two years, no warranty from Whirlpool. No biggie until I read countless complaints that Whirlpool OTR microwaves dont last. When I was young we had a Whirlpool microwave oven that lasted 15 years. Apparently this one (made in China) is the direction Whirlpool has chosen to take, cheaper products for higher profits.

Purchased a washer on 8-29-2010. On 2-15-2012 transmission went bad. I called Whirlpool, they will not stand behind the product and wanted me to buy a warranty and then they will come out and repair the machine. Great customer service. Build a bad appliance and get the customer to pay for warranty. Do not purchase Whirlpool.

Purchased Whirlpool washing machine two years ago but transformed into junk within two years. Fraud company only searching ways to loot the money of the innocent customers and manufacturing such appliances which greasing mentally.

Our over the range Whirlpool microwave door casing is disintegrating where the door handle screws to the door. Big chunk fell off today.

We bought a gas hot water heater from Lowes on Dec. 31, 2010. In July 2011, there was no hot water. After much yelling and headaches, Whirlpool agreed to send out a technician to look at it, since I refuse to go in the attic and I will not work on gas appliances. After 7 days with no hot water, they replaced a valve that failed, they said, because our attic was too hot. The old unit never complained. Eight months later out, the unit went again (and we had an attic fan put in). This time, Whirlpool sent out a local plumber (and I paid for the call) though we had a warranty and extended plan with Lowes?! This time I was told no problem it was too windy and it blew out the pilot. Its funny we never noticed the attic being windy even during the hurricanes. Four to 5 months later, well, you guessed it but this time my husband just re-lit it. Then the next time, 5 months later, my brother-in-law did it. That was August to September 2012. See, this morning, there is no hot water. I had to fight with Lowes since we have the 5-year extended plan. I cannot get anyone to explain why it makes sense to them that a 2 1/2 year old hot water heater has to be re-lit every 4-6 months. Then I went online. Now I know why Lowes and Whirlpool are ignoring the issue. So, anyone know a good lawyer or what are they doing to get satisfaction?

Whirlpool Water Heater Purchased at Lowes - Like all the others I see on here. I Purchased a Whirlpool water heater at Lowes Model# BFG1H4040T3NOV. Pilot will not stay lit; customer service tells me to replace the thermocouple which did not solve my problem. This is the second time in 2 years same problem. First time it was fixed under warranty but now since it was replaced once it is not eligible for replacement so I now must decide if I want to pay someone to figure out the problem and I must pay to repair it or what I am starting to think is that I will likely junk it and buy a quality unit and be done with the games and run around and just have hot water, which is all I really want. I will never buy another Whirlpool product in my life and will encourage everyone I know to do the same.

People should consider themselves lucky to get 2 yrs, 1yr, 6 mos out of these pieces of junk. Mine replaced an 8 year old Bradford White that was originally installed when the house was built. Funny thing, we had the exact same BW in our last house. Same problem after exactly 8 years - tank leaked. Anyway, this Whirlpool 40 gal gas was installed by a professional plumber ($200) and ran fine for 6 days before the pilot went out the 1st time. In the next 10 days it went out 9 more times until it wouldnt stay lit at all. I would light the pilot and it would be out in 5 min or less. I watched for the error code the last time - 2 flashes which indicated thermocouple low voltage. This is totally ridiculous. After research - which I should have done before I bought - it looks like a total bad design problem with associated customer service nightmares and much additional cost to the customer. AND EVERYONE WHO MAKES AND SELLS THESE THINGS KNOWS ABOUT IT. Attempting to fix this thing - even IF labor was included - looks like throwing good money after bad. When are these companies going to be held accountable for producing cheap poorly designed products and then let the consumer foot the cost of labor and/or replacement. You can say all you want about less government but this is just a small example of what you get when you have less government. Doing further research, it looks like NO manufacturer of gas water heaters can produce a reliable product now. So now, Im installing a Bradford White ELECTRIC water heater. Thats and extra $250 for the electrical service that needs to go in. AND additional for the actual install by a plumber. At least Lowes is not giving me a hard time about getting all my money back for the Whirlpool since its less than 30 days since the purchase. I guess I should consider myself lucky it malfunctioned almost immediately. Total out of pocket on the initial Whirlpool install: $560. Total out of pocket with reinstall of BW Electric: $1000. My time spent on this mess: priceless. At least we will have hot water, even though it will cost more per month in electricity to do it. Thanks Whirlpool - stay classy.

I bought in 2008 a Whirlpool Cabrio washer because it was the best. It cost me $900 plus 170 extended warranty for four years.This month, my washer showed an f1 code. I call the Maytag store and guess what, they are not there anymore. They closed the store. I called for my extended warranty and guess what, they are not with Maytag and they filed a chapter 7. So, I spent over $1000 in a machine that only worked three years and now I have to buy another just because no one wants to take the responsibility on the warranty. I have to pay another $300 to fix the problem and even doing that, theres no guarantee that it wont fail again. So, and this is to the people of Maytag and their cheats, you may take my money but you lose me as a customer forever. Thank you for nothing. I will keep that in mind next week when Ill be in the store buying another washer.

This Whirlpool washing machine is incredibly annoying and slow in everything it does. First off when you press the START button it takes 2-3 minutes before it decides to do anything, like maybe add water (except click, click and more click). If you have pressed the start button and you want to stop it to add something... again you have to wait almost 2-3 minutes before the lock is released and you can open the door. I am at 2 hrs and 15 minutes as I write this on the LIGHT WASH cycle with extra rinse and its still going. I have never seen anything like it. Cant imagine how long a HEAVY CYCLE takes. Cannot even try to measure the time. I put the load in and go to work and hope its complete when Im done 8 hrs later.We had a Maytag for 15 years with no issues (other than a drain hose cracked and had to be replaced) and it was time for a new one with a move to a new place. The sales associate convinced us this was the best machine at the time... Well what a mistake that was. There are no complaints about the actual washing. Everything comes out clean but I suppose taking that long I cant imagine why it wouldnt. I certainly cant recommend a Whirlpool washer to a friend, because I dread the thought of doing laundry at this point.

I bought Whirlpool front load washer at Sears in June 27, 2012... (serial W104408696A) (W10409178A-SP). I had 6 episodes within a 1-year time that my clothes got burn holes and the inside of the washer. I would find a handful of gray powder after doing my laundry. The first time it happened, I thought that I left something inside my clothes that resulted to it, but I did nothing to contribute to the event. The second time it happened, I thought Im putting the wrong setting, so I chose another setting to wash my clothes. In that span of 1 year it was on and off happening. I read different reviews on this washer, and I am not the only one whos had this problem. Finally in 2013, before my warranty would expire, I requested for Whirlpool to fix the problem. Right away the tech told me that the problem was the glass covering, so they replaced it. Now my washer would not drain. I believe that this product does not belong in the market. If they knew what the problem was, they should have recalled it. I kept the sample of that gray powder.

Purchased Whirlpool dishwasher and range approximately 16 months ago. Dishwasher must stop in middle of rinse cycle because the dishes always feel filmy and there is an inch or two of water in bottom. Must be bailed out by hand. Piece of garbage. Called Whirlpool and they can get us a service man from 8-4 (who waits an entire day these days) on New Years Eve. Next appointment is following week to examine and will fix (if it is their fault and for a fee). The last two dishwashers I purchased lasted 10 and 7 years respectively. Stay away if you dont want bad equipment, uncooperative service, and aggravation. Range I bought was OK but the oven temperature is always off 10-15 degrees from what it says it is. I honestly wanted to buy American but I feel cheated. Next time Ill try Samsung and see if they give a damn.

Whirlpool Cabrio Platinum Washer Model WTW8800YC1 - I bought the Cabrio washer and dryer pair about 2 years ago at Lowes. About 5 weeks ago the lid fell apart. The hinge area came loose so now there are three pieces to line up (glass lid, metal arm, plastic frame), the fourth piece fell off completely. If you are successful at lining them up you can push the lid down and set a weight on it in order to wash. My first repairman said it was common issue. He expedited a lid. Three weeks later I called to find out when it may be repaired. He said he hadnt gotten the part from Whirlpool. I called Whirlpool... nice lady told me the part was on back order but should ship the first of the week. So on week 4 after not hearing anything I called a new appliance repair person. It is going to cost about $280 dollars to repair. This is one third the cost of a new washer??? I fight with this machine every day to get it to wash.

After just 22 months I need to shell out $300 for a new microprocessor. My Miele lasted for nine years. In the olden days washing machines could last for 15-20. Do not buy Whirlpool, from what I understand its a dying company...

The gas water heater that we purchased has been a headache. Pilot went out several times. When we contacted Customer service they informed us that we would have to have a new kit put on it. We ordered that and it worked a while and then we started having the same problem. Just recently we had to purchase another part and once again we have cold water. Fed up.

May 16 - July 25, 2014. Took almost nine weeks to get the replacement. Numerous service calls. Their tech said self-clean feature should never be used. In addition, I heard that the techs are only paid for one service call, no matter how many times they come. And, they cant fix this oven. It has to be replaced. Nightmare and very dangerous. Most American families cannot wait nine weeks for a new oven to be fixed/replaced.

I purchased a Whirlpool washing machine (new) in 2004. From the beginning, I had problems with the spin cycle. I phoned Whirlpool. I paid for service with no reimbursement. With the costs I have had for service, I could have purchased 2 machines. I have had to go to Laundromat to do wash then come home to dry. I have for 30 years only purchased Whirlpool large appliance. My washer and dryer were always refurbished but they were Whirlpool. I have had a (refurbished) Whirlpool dryer since 1997 with one (1) service call. However, this wash machine, purchased new, has been a money pit and a piece of trash with Whirlpool only giving lip service when calling. Also, going to the Laundromat, I have been amazed at how many individuals I speak with are there doing wash because their Whirlpool washer, mostly even newer models than mine, do not work! And they have the same story. There’s no service when you call. Shameful Whirlpool! Buy your parts from us. Maybe your credibility could be restored. But I will never purchase your Whirlpool or other names under Whirlpool! When I do get another washer, yours will be put on my front lawn with a large sign of your disgraceful products and service!

Having spent over RS 40000 on a so-called quality product one does not expect to spend nearly 20000 within the first two years of the purchase. 1. As soon as the warranty got over the PCB (costing 3000) broke down. 2. This replacement had a 3 MONTH warranty. Exactly after 9 months again the PCB breaks down along with leakage of gas. The service team asks us to buy a stabilizer to ensure that no such issues occur as they attribute these breakdowns to voltage fluctuations which are not of any precedence in Delhi. Also the product I am using was sold to me as a stabilizer-free working. 3. I made the suggested investments 4 months later the fan and motor of the freezer stop working. Imagine so much repair work on a new equipment. I have been writing to them yet all that they say in response is we are looking into the matter. NO ONE SHOULD BUY WHIRLPOOL REFRIGERATORS.

I purchased a Whirlpool Refrigerator with French Doors, Model No. GX5SHDXVD03. Within 1 year and 4 months, I had to replace the defrost control board. I spoke to Whirlpools customer service, George ** said he was sorry for my inconvenience but that he refuses to help in any way because I missed the warranty period by 4 months. I spent $352.74 for the parts and labor and lost hundreds more in food. Do not purchase any Whirlpool products. I was told that the boards have been going out frequently.

I bought a Whirlpool Gold Series Microwave, model # WMH76718AW, on 2/19/13. It stopped working 1/25/15. It doesnt heat food anymore. I also have a whirlpool dishwasher that doesnt clean dishes. Whirlpool products are junk. Whirlpool customer service is awful. The cost of fixing this lemon and then buying an extended warranty for the repair (which they recommend) will make this a $1000 piece of garbage. They dont stand behind their defective products. Ill never buy another one again.

Sent an e-mail to Whirlpool. They responded with apology. Sent a second e-mail telling them they should be paying the $300 for circuit board in a two-year-old range. No response. Also, sent e-mail to Geniers. No response. The impression I get is that neither are the least bit interested in the problem. Once they sold the $1260 range, they were done. We will never buy another Whirlpool from any store and we wont buy anything from Geniers in the future.

Our machine was bought via the employee purchase program. Its just under 2 years old and the bearing has been out for nearly 6 months. I called Whirlpool and our local Whirlpool repairman. They both want hundreds of dollars to repair it. Being pretty handy, my husband and I decided to fix it ourselves. Trying to find compatible parts for this model is a NIGHTMARE. Everything in my house is Whirlpool...range, dishwasher (also junk), microwave, fridge, washer, dryer...and it will all be systematically replaced with ANYTHING BUT WHIRLPOOL OR ITS COUNTERPARTS.

I have a brand new Whirlpool washer (Model WFW9640XW). It has been broken for 3 of the five weeks I have owned it. The Whirlpool cusotmer care cannot get me a working part in order to fix the machine. I am being told that I just have to wait until they find the part, with no end in sight. I am held hostage now that they have my money. I am told there is nobody I can talk to to break this impasse.

WTW6340WW0 - When washing clothes, on the last spin it stops and gives an UL error message. I make sure all the clothes are level and restart at that point but still the UL error message appears and water starts leaking from the underneath of the machine. Weve reset the and unplug the machine but no difference. Please help on what else to do.

We purchased a Whirlpool Cabrio model # WTW6400SW3 in 04/08. Approx. 6 months ago, the washer started to be un-level during the spin cycle. This has progressively become worse, it now becomes un-level during the rinse cycle. We spoke with the appliance store where we purchased it, ;hey said the repairs could cost $400 or more. Thats nearly half of what it cost new. Like other complaints Ive read, cheaper washers have lasted years longer than the Whirlpool. Our last washer, a Kenmore, lasted 15 years.

I live in a new community, and this French Door refrigerator with bottom freezer was offered as an upgrade. Two of my neighbors and I have had the compressor break right after the refrigerator warranty expired. Luckily for us, the builder purchased and extended warranty, so we were all covered. I have NEVER had a compressor go out in ONE year.

We purchased a Whirlpool Cabrio washer in 2009. It makes awful sounds during the draining and spinning cycles, has started leaking in the past month and now, several error codes and will not finish a load of laundry. We have a family of eight and thought that we had bought a very dependable product for what we need. Boy, we were wrong!

I bought a Whirlpool top load washer. In less than a month it had to be serviced by their recommended service repair. It has never worked properly. It malfunctions almost everytime it is used and takes at least an hour to wash even a small load. At first I thought I may have acquired an odd lemon. After talking with several friends who had bought the same Whirlpool model I found we all had the same complaints. My old machine could wash a king size comforter in 36 minutes... that was energy efficient.

I have the same problems as the ones listed in complaint section. I bought 4 Whirlpool products at the same time: refrigerator, stove, and the Whirlpool duet. Washer is a front loader. We have had nothing but trouble. The company we bought the machine from exchanged the washer for the same model because the electrical was bad and the parts to replace were back ordered for more than 3 months. We are now having problems with the exchange washer. This time it is the same as the engineer remarked in his complaint the bearings are bad and it sounds like a jet taking off. It’s that loud.I went down to the place of purchase and I am in the process for the repair. I have a feeling this will not end well. Whirlpool, if you call them, gives you a run around or tells you they dont have you listed in there computer. We dont have the money to replace any of this. This new machine is only 9 months old. Whirlpool is making a killing off of fixed income people and the working class. You tell me who can afford the cost of that kind of repair or the cost of a new machine that only works for a couple of months. Why is 60 Minutes not on them like a bad smell?

Purchased the new dishwasher in 2009 through the builder of our home. I quit working completely like there was no power to it. We replaced the fuse to it and then it worked, but kept pausing during the cycle. Sometimes it will completely go off and then when the control panel comes back on, it sits paused until you push the button. We replaced the computer with a new one and it works even worse. It shuts down more often and still requires a restart. So frustrating! Appliances should last longer than a couple of years.

Bought on 9/11/2014 and installed by Lowes installers on the 15th. It quit heating two days later. Called Lowes and they said I would have to call Whirlpool. I did. WP had me metering with a multi-meter until found OTC button was tripped. Then they suggested I troubleshoot the elements and sent me a video. I called Lowes and they said they would replace. Later they called back and said WP would not give them a RA number and for me to call them. I did and the rep after much arguing directed me to call their factory authorized service, A & E. I did and they said it would be 33 days before they could come out. I hung up and called Lowes who called back later and wanted me to call WP again. This time they said they did not have a repair service close enough to come, but I could try buying the lower heating element and replacing it to see if that worked. I said no, the heater was brand new and they needed to fix it. Their next solution was have me contact a local plumber and arrange to troubleshoot, me pay the plumber and then send them the bill. They would reimburse me up to $100.00. Not acceptable and now the button has to be reset every few hours and the water gets scalding hot while it is heating. I called Lowes and they said they would get back to me, but I have little hope of a resolution. Product number is ** SN is ** Model is E2F50HD045V. Bought at Lowes, Lindale, TX.

Purchased Maytag Washer and Dryer online from orange big box home improvement store. Washer had a twisted drain hose inside so it wouldnt drain right. Fixed that myself, but it still wont drain right. The spin cycle is weak at best - towels require a second, sometimes third, spin cycle. The dryer does not heat up like it should on the standard setting. The end of cycle buzzer/beeper on both units is truly pathetic... you better be within 6 feet of the machine when the buzzer goes off or youll never hear it. Having worked for a blue big box home improvement center for 7 years installing appliances, I know all too well the rabbit hole Whirlpool is trying to push me down. All I want is to return the Maytag and go back to a Whirlpool, but the not so pleasant lady on the phone with Whirlpool said all they can do is send out a technician, no returns on appliances. Buyer beware, be very aware!

I purchased this Refrigerator Model #wrb322dmb, bottom freezer, 21cu ft. last year on July 3, 2015. In September I noticed rust spots on the top door. I called Home Depot where I purchased and they directed me to Whirlpool. I did purchase an extended warranty with Home Depot. Whirlpool did replace the top door. Thought that took care of it. Today one year and two weeks out of warranty, I again notice rust on both doors. Called Whirlpool. They said too bad out of warranty, not considering I had a previous report of this very same issue. So since I am very unsatisfied with this result and the fact that an expensive product is rusting, I decided to share to try to prevent someone getting stuck. Stainless steel is not supposed to rust which leads me to believe that it is not Stainless steel, but a Stainless Steel finish and not a very good one. So I am stuck with a rusting $1200.00 refrigerator only after one year. I have always purchased Whirlpool, but no more. They lost a 40-year customer. I have always bought American made but no wonder people are not buying American made any longer. TO SUM IT UP WHIRLPOOL STAINLESS STEEL APPLIANCES RUST! DO NOT BUY!

Worst refrigerator Ive ever bought. Previous one still perfect shape. 22 years old. Freezes everything on top shelf. Motor making grrrr noises. Had repaired. Now bottom crisper drawers so cheap the plastic is breaking. Drawers wont slide. Now Deli tray lid snapped in half! STAY AWAY from this USA made product.

I have replaced the damper control unit three times the last three years. The part begins to fail after nine months in used. The temperature becomes too cold in the refrigerator and the food started frozen because the damper door wont closed as cold air flows from freezer to the refrigerator. It adds to the displeasure that Whirlpool is not taking care of the shipping cost even the part is under warranty.

I have always liked Whirlpool products but it seems lately they are lagging in this department. My washer/dryer combo each separate I dont feel are doing the job they should be. Washer is the bigger problem. Softner dispenser not distributing the softner correctly and now I have to clean out after each use. These are about 10 years old now. Is not spinning all the water out and not at all sure if clothes are getting clean. Most of their products usually lasted much longer back a few years.

I bought a Whirlpool Gold refrigerator four years ago, June 2012. Today, 9/20/16, I found out that the ice maker has to be replaced to the tune of $350! The repair person told me that Whirlpool has the worst track record, and of his service calls, he has at least three to five Whirlpool refrigerators per week! This is a terrible lack of quality. When youre spending over $2,000 for a refrigerator, you expect it to work for more than four years. Not only that, but I have e-mailed Whirlpool Customer Service twice and have been ignored completely. This is my last Whirlpool product, and I urge you to stay away from them. Samsung has a much better track record.

We have a Whirlpool Cabrio mod. WTW5600 XW2, ser. C12830447 he... H2O.. low wash system. Less than two years old. It does not get clothes or towels clean. I put 2 jackets in on bulky items and part of one of the jackets was still dry. They were two small childrens jackets. My husband and I wash as long as possible and on hot wash (which is not hot!). Should not take 70+ minutes to try & get normal clothes clean!Now the softener is draining into the wash with the detergent. Another service call. Learned you can only fill the softened bin half full or less. WHAT??? Our extended warranty is up soon and not sure what to do. We would like to get rid of this pile of junk but cant afford another washer bill. Also wouldnt want anyone else to get stuck with it. Its a shame a company cant put out #1 good product and #2 stand behind it. Bring all of the company production back to the USA or put out a better product and stop worshiping the almighty dollar. Im done with Whirlpool (which was the product to buy), but stuck with this washer for now until we are sure that the brand we buy performs as it should. What happened to the PRIDE in & RESPONSIBILITY of making a good product and standing by what youve made. As my hubby has said, if you have to buy an extended warranty, whats wrong with your product! Again worshiping the almighty dollar or is it you just dont care about the people who buy your product or its quality. Maybe both.P.S. Have contact you before without a response.

I just bought a house that has one of these ranges, and it was getting the F2 message. I found the problem. There is NO ventilation behind the electronic control so when the oven heats up, the control board gets too hot and throws the F2 code. That would indicate a bad temp sensor or bad board, but really its the heat shield on the back. Ive removed the metal plate from behind the control panel and it works fine now. Im considering drilling some vent holes and adding some insulation behind the control.

I have a small condo and this dryer fit into the appliance closet with a few inches around it. Every home needs a laundry system. I bought the washer and dryer in this model. Whirlpool is great!

I have automatic Whirlpool washing machine since 3 1/2 years I am using. Now 2 times electronic board came problem so how many times can change like this? Why they are manufacturing if they cannot solve this problems? Should not sell in the market. This all not coming free and need to struggle. Whirlpool products all very bad appliances.

We Purchased our KitchenAid refrigerator from Home Depot. After 1 week we had issues with the ice maker, water dispenser and lights going on and off randomly. Technician comes 5 days later, he half way fixes it and discovers we need to order a part. The part took over a week to get and by the time he shows up to fix the refrigerator, it has now been TWO WEEKS with out our $4,000 refrigerator not working properly. Well, after trying to replace the part and spending 45 minutes on the phone with some engineer, it still wasn’t fixed. He Says to us “hey good news youre getting a new refrigerator”. Good news my **. It’s now been THREE weeks and it turns out the new one isn’t coming for another week. Customer serves reps. are really good at apologizing for the inconvenience but Whirlpool has Done NOTHING to composite us. DO NOT BUY WHIRLPOOL.

2007 we purchase a Whirlpool Casio washing machine. Rusted out in three years. 2008 we purchase Whirlpool gold dishwasher. In two years the front panel rusted out. We replaced this panel and now the second one has rusted out. According to Whirlpool they do not cover rust. When we replace the washer it was with a Samsung. NO SIGNS OR RUST IN THE LAST THREE YEARS. When we replace the dishwasher it will not be a Whirlpool. As far as I am concerned, Whirlpool products are junk.