We bought 2 Whirlpool refrigerators for our new home 5 years ago. The first ice maker died 2 years ago at 3 years old. The second has now died this month. We called the repairman in who told us that Whirlpool knew there was a problem with their ice makers, but because they did not cause fires, they were not recalled. We paid $480 later for items that should last at least 10 years, not 3-5 years. We will never purchase another Whirlpool appliance and neither will any our family. A company with this level of ethical behavior that knows they have a faulty piece of equipment and just chooses to do nothing does not warrant my business.

This morning another chunk of our Whirlpool Microwave handle fell off while I was cooking breakfast. I got on the internet after breakfast and typed in whirlpool microwaves to see if anyone else had experienced problems with their microwave handles and found this site. We purchased a Whirlpool Microwave oven from Lowes in 2011 (over the range model). About two weeks after it was installed, I noticed a crack in the handle. Then a few days after that, a small chunk of glass/plastic fell off of the handle when I shut the microwave door. Since that time, the door handle has been steadily disintegrating. Sometimes chunks of plastic fall off when one shuts the door, even if you are very gentle. Chunks of plastic fall off nearly every time I clean the microwave door, even if I dont touch the handle. Sometimes chunks fall off randomly when Im not even using the microwave. Pieces of plastic have fallen into my cooking pots a few times. Perhaps the steam from the cooking food loosens the cheap glue holding the handle on? What an inferior product! I am very dissatisfied with Whirlpool and will not recommend their products to anyone.

I have had my Whirlpool Cabrio washing machine for 14 years. I feel this is very dependable and cleans my clothes efficiently. I love the large stainless steel tub without the agitator. I can fit a king size comforter in the machine. The only problem I had with it was to clean the lint out which I would assume would have to be done to any machine that is used every other day for 14 years. Love it!

The icemakers Whirlpool has been using for the last couple of years are a PITB. They have diamond shaped ice cubes which are great but, whenever the filter nears the end of its life, the icemaker fill tube freezes up. Occasional freezes up just because. Changing the filter, although the old one supposedly has some life left, may/may not solve the problem. Filling the ice tray with foreign ice for a few days thaws the fill tube and it will generally start up again - maybe. Complete waste of time and energy!

In July 2012 we purchased a new Whirlpool Gold refrigerator. Last month ice maker went out. We bought it at Best Buy. They sent out a third party repair co. subcontracted under Geek Squad. Response was same as all these threads - just have to replace it. Since Whirlpool does care why dont we all go after place we purchased these refrigerators or the suggestion of a class action suit works for us! This is absurd!

I bought the Whirlpool gas water heater less than 1 year ago from Home Depot. It does not work. The pilot light will not spark to ignite the gas. Customer service is never available when you call, you get a message machine. Going forward, I will never buy a Whirlpool product and I will recommend friends and family to boycott Whirlpool. The 6-year warranty is worthless. You cant rely on the warranty. You cant rely on the water heater. You cant rely on Whirlpool to stand behind their product. The water heater is junk.

I bought my Whirlpool refrigerator (Fresh door with Ice maker) from Best Buy in July 2017. By 2019 December the ice maker had stopped working and the refrigerator turns off / shuts down automatically. Have confirmed that the power is still on because of the display on the door. So it is not a power issue. Paid $180 for a Whirlpool authorized consultation and they said the Ice maker motor does has stopped working and the computer board needs to be repaired. This will cost me around $800. Called up customer service to see if the cost can be lowered but of course they said a NO. I am truly upset with the brand and with Customer Service for their lack of empathy.

When my dryer died my wife and I decided to get both a new washer & dryer. I kick myself for two reasons. My 15-year-old washer which worked fine I replaced, and I didnt check reviews before buying. What a mistake. The eco-friendly Whirlpool washer designed to save energy doesnt clean close, my towels are the worse. Coming out of a shower and using a freshly washed towel to dry off and it smelling like it had never been washed tears it for me. Im hoping like many others they will rebate or even better recall and pay back the money I spent on a worthless washing machine! So, if Whirlpool wont do the right thing, I will do my best to warn others to not buy this top loading piece of **.

Cabrio top load HE washer - Ive only had the washer a couple of years. My husband bought it for me thinking it would make washing more time efficient and energy saving. Lesson learned! After struggling with this washer for the past year, I was told today that to repair it, it would cost around $800 or I would need to buy another washer. The washers bearings and tub need to be replaced and it will not spin properly or at all. Previously, I have owned washers for over 10 years each. This was definitely not a good purchase. After reading all of the other complaints on this site, I understand that I am not alone. It was also mentioned on one complaint of the possibility of a fire hazard with this washer. Whirlpool should be recalling.

Our 2005 whirlpool duet washer steel drum and plastic tub broke. My husband diagnosed the problem and opted to fix it to save money. The parts are under warranty but you still pay labor and technician visit running up to $250-$300. The plastic tub was obtained only if we paid for it $100 and the steel drum they sent under warranty. The plastic tub has a hole with a black plug and sensor in it. There is a discrepancy in the measurement of the old tub and new tubs hole that is slightly larger, therefore when installed a steady stream of water leaks out. I now have 3 plastic tubs as that was their solution, to send more of the same that did not measure correctly. An investigation was done to determine they were the correct parts. As asked we had a whirlpool technician come to verify parts were correct and being installed correctly and the parts sent would not fix the machine due to the hole discrepancy. Many calls were made to whirlpool and they continue to give me the runaround. They now are not taking their technicians information. The technician has given the information to 3 sales reps in the new england area and made several phone calls to whirlpool and no one is willing to give us a solution.

I purchased a Whirlpool Cabrio washer model #wtw8200yw in August 2012. I just purchased a new washer today (Jan 2018) to replace it! We have had to replace the lid lock twice, then the cycle knob would only work on the normal cycle. Last week it started to sound like it was going to take off! Had a repairman come and the bearings went out in it, will cost almost $500 to fix! Not spending another dime on this junk! I purchased a new washer today (not a Whirlpool either!)

Whirlpool side by side model WR5571CIDM. Unit rattles EVERY time refrigerator is opened or closed + plus every hour or so spontaneously. Rattle seems to come from the water filter area. Whirlpool serviceman says its normal for this model and calls to Whirlpool customer service say just live with it. Hard to believe Whirlpool considers this acceptable performance in a new model.

I am completely dissatisfied with the Whirlpool Cabrio top loading machine. Our washing machine is less than one-year-old. It doesnt get the clothes clean, especially the darks, and it is so rough on the clothes that they come out twisted tied into knots. The dark clothes come out dirtier than they went into machine. Even though we use the dark detergent on the dark clothes and program for an extra rinse cycle, the clothes come out with white powder all over them. They need to be washed again and sometimes again. And sometimes they still dont come out clean. That is not very energy efficient. The clothes come out of the machine so wrinkled that everything needs to be ironed. I can imagine making washing machine that doesnt do its primary function, which is to get clothes clean. Todays families do not have time for this extra work.

My Whirlpool Cabrio Washer is only 4 years old. I have had balancing & spin issues since day one. Thought it was just me. Constantly had to drain and spin after rebalancing. Now 10 days ago it cost me $250 to have it fixed. The aqcuator (?) Went. It wouldnt spin out. Now 10 days later it stops again. The appliance guy reads code. F7E7. He tells me the bearings are no good. Will cost another $400 and they need some special tool to fix it. IM DONE. My last set was 15 years old. The price is ridiculous and quality not worth what this triple capacity set cost.

Ive read the reviews on this appliance. First of all the all of the washing machine being manufactured are designed to save energy and water. The water is loaded in the machine based on the WEIGHT of the clothes. the washing machines no longer have the features to (small, medium, large load) so the consumer can fill the machine. Having said that, most sales representatives will tell you appliances manufactured today are no longer designed to last 15-20 years, although they are way more expensive than the workhorses made in the past.I got rid of my fancy Samsung washing machine because it broke down at least 4 times within the first year of purchase and decided to go with the whirlpool because Ive had a workhorse in the past that was worked excellent. I love the fact the washers no longer have the agitator in the middle which allow me to wash my king sized bedding without the machine becoming unbalanced or making a lot of noise. So far the Whirlpool Cabrio washer and dryer is working very well. Id rather give the Whirlpool a chance any day over the new johnny come latelys, which are more aesthetically pleasing to the eyes but are failing miserably in performance. I also love my Cabrio 8.8 dryer. They both work better than the Samsung models I got rid of.

Leaks water on bottom. Door seal dont go far to under door, is from manufacturing defect, is water overflow or is something else. Dishes washer is about 10 years older. Very real disappointed and wont buy this brand again on dishwashers.

Purchased Whirlpool fridge in December of 2013. I have had repairmen at my home over 10 times for repairs after warranty expired in December of 2014. Purchased extended warranty and still have to wait over a week for repairs through local Whirlpool service tech. Ice maker has been problematic from the start. Either it makes a bucket in 3 days time or it makes none. I will not buy another.

I bought the WP Cabrio washer on 10-18-16 from Lowes. It does not wash well, my dark clothing came out with white spots all over them even after I rewashed them x 3 and the lighter clothing you dont see the spots so you are wearing dirty clothes. Also, it is making a lot of noises while running. WP should pull this model off the market.

Whirlpool Cabrio Purchased 12-7-2012 - what a piece of junk. Does not get clothes clean, rarely does she even spin out properly. Called because it kept walking across the basement floor. Informed that was the owners responsibility, not the store (Feidens in Latham). Always had good luck with them, bought all my appliances from them. Now I heard a loud bang and she threw up - water everywhere. What a mess.Had purchased special patio block at Home Depot to even her out and every time I used it which was not too often, it acted like the space shuttle ready to head down the runway! Not too happy with Feidens attitude with regard to this purchase. Not going to call them to fix it. Not an ready to pay to listen to their guff again. Expensive machine never worked well since it got here. I always wished for a Whirlpool, be careful what you wish for! Junk, nothing but junk. Only 3 years old and I only do laundry about every 3 or 4 weeks. Live alone, so she certainly was not overworked.

I am very disappointed with the purchase of a Whirlpool Cabrio Washer and Dryer I made about 3-4 years. The price was too high and the quality is extremely poor. It has a leak in the pump which will cost me $300.00 to fix. I probably would have been better off buying the cheapest washer and dryer set they had. At least, those actually wash the clothes and dont breakdown. Never again will I buy a Whirlpool and I will get every chance to share my opinion of them.

Uses little soap. Not sure on clean. Don’t think front loader clean as well as top loaders. Would recommend top loaders with no agitation. Also would recommend white as a standard color. I am unhappy with the way a front loader works. I am happier with a top loader, cleans better.

I have had the same lid problem with our washer. New in 2010. The lid just broke in the same place for the 3rd time! Called Whirlpool customer service. Yes they can find my account. No, they dont have a record of this happening to this washer before. Even though I called them and got the lids through them two other times!!! But they will be happy to send me a new lid for $260!!! Also love the fact that they dont acknowledge the lid is a problem. Time to find a new washer that isnt Whirlpool!!

Purchased this Whirlpool refrigerator WRT771REYM at Home Depot in June 2014. Within a few months of purchase, had to call for a repair tech because the water line had frozen. Tech unfroze it and told us not to block the air vents to avoid this happening again. The amount of care we have to take to load this fridge so as not to have the water line freeze is ridiculous. Its very picky. For a while, we were still having to unfreeze the line every couple of months. Then it became more and more frequent, to the point where we cant keep it unfrozen for more than a few hours. This seems like shoddy design to me. And of course, the warranty is expired so I am out of luck unless I want to pay for repairs out of pocket.Adding insult to injury, Whirlpool claims that this isnt a common issue. Not true - there are numerous reviews about this very issue on Amazon, Sears, Home Depot, etc. Just try googling the model #. Sad that Whirlpool does not stand behind its products. Yet another American company to stop building quality and rely on planned obsolescence to ensure revenue generation.

I am very unhappy with this Whirlpool refrigerator model# GX5FHDXVQ 04. I bought this model in October 2011. You have to push the left door to close it and if you dont then the fridge will stay open. I had a Whirlpool tech come to fix this door problem so this is what he told me: 1) You have to push the door in order to close it properly; 2) Before closing the left door, I should first open the right door (losing energy); 3) The gasket will break very fast; 4) Buy a three-year protection plan because you will have to use it; 5) The freezer is very uncomfortable. In the bottom drawer, you have to fit your stuff. If you put your freezer stuff in a drop higher, then you cant close the drawer, so I am losing space; 6) Sometimes when I fill up the fridge, I move the temperature to #5. After a day, the top shelf back stuff will freeze and the front stuff will stay on fridge temperature. Yesterday, 4-18-2012, for the second time, the freezer gets a sheet of ice. Repairman will repair it but who knows. This fridge looks to me like a lemon. The height is 70 but listed as. I rate this fridge with a CCC.

We purchased our Whirlpool Water Heater about 2 years ago. Three weeks after we bought it, it stopped working; the pilot light would not light. They sent a tech out to replace the thermostat and the thermocouple. Now, it has stopped working again. My husband and I have spent nearly 20 hours on the phone with the WP customer service girls and replaced nearly every part but the tank it self. We have not had hot water for over a week and are at wits end! My husband finally got them to authorize us to get a new water heater from Lowes after they told him there was nothing else they could do to help us. Ive read pages and pages of complaints from other people having this same problem. Why do they put you through all the torture if they know its not going to work? Its very frustrating! We are almost to a point of ripping out all the gas lines and going electric! Will the new one we picked up today have the same problems? Only time will tell!

Purchased the Whirlpool DU915 in 2004. Its been 16 years and I havent made a single repair. A lot of that is just proper use, i.e. scraping off food stuff, using correct soap, etc. I have other newer Whirlpool dishwashers at rental properties which have required repair due to misuse. I would recommend Whirlpool products to friends and family.

Whirlpool duet - I have had this machine for 4 years and have gone through as many door gaskets. They rip in no time causing damage to clothing and with the leaking damaging my wood floors. A definite do not buy!!!

Our gas stove (Whirlpool WFG714hLAS1) has been working fine and it looks great. However I just tried the self clean cycle to clean it up. I dont do a lot of cooking with only the two of us, but I like to keep things clean. I was very surprised after the first time - it didnt look much different than before I ran it! I was used to simply wiping down the oven following a cleaning, just removing the leftover ash. I havent had to scrub an oven for many years and it is very hard for me. I ran a second cleaning cycle and it didnt look any cleaner. We both had to kneel down and try a variety of non abrasive cleaners which finally got most of the grease spots, but not all. I guess we will just have to cover the roasts and try to keep aluminium foil on the bottom rack as much as possible. PLEASE re-consider buying any brand stove that has this awful feature, unless you like cleaning ovens by hand!

Whirlpool Water Heater bought May 2011: Water heater not heating. I called Whirlpool and they stated the equipment is under warranty but not the labor; $137.50 for 1st hour of service. Troubleshooting is a joke. It just doesnt heat. Waiting on the 3 plumbers to call me back. They are busy. Water heater went out Sat morning and Whirlpool doesnt open until Monday. Its Monday at 5pm and Im still waiting on a call back.

Cabrio - In Dec 2013: Ran the Clean washer cycle and it would not cut off. I had to shut off manually. Called the company and they sent a technician, who said he fixed it and that everything was good. Fast forward to Feb 2015: Tried cleaning the washer again. When I left the house there were 10 minutes left in the cycle. When I arrived home 7 hrs later, the washer was still running and my hot water heater had cut off. I had to reset via the circuit breaker. This will be my last Whirlpool appliance for a long while.

We purchased a new Whirlpool Cooker (Model Number YWFE745HOFH2) in June 2021. Our first disappointment came when we used the Self Clean function to clean the oven. Unlike our previous Whirlpool cooker (which we were very pleased with) this required us to put water into the bottom section of the oven. After the advised time the oven was exactly the same as at the start of the process. For readers of this review I would like to stress that the oven was not excessively soiled. We just wanted to try out the feature. In August my wife dropped a ceramic cup onto the cooker top and the top shattered completely. This, of course, was not the fault of Whirlpool, but we were shocked that the damage was so extensive. A new cooker top was ordered and arrived at the beginning of October (dispatch problems). After each use of the cooker top it has been cleaned with a recommended cleaning product. Today I accidentally allowed a pot of rice to boil over and, although I immediately removed the pot from the cooker top and wiped both the bottom of the pot and the top before continuing, the residue will not come off of the surface. It looks awful! We had our last cooker for over 10 years - if I could afford to I would get rid of this product tomorrow!

In 2007 our Whirlpool 30 gallon gas water heater began to have issues. Serial number 0425126675, Model Number FG1F3030T3NOV. The pilot light kept going out and would not stay lit.. After several times with replacement parts being sent with the same thing happening, finally in 2010 they replaced the water heater. A new water heater was professionally put in, serial number 1023T412357 Model number BFG1F3030T3noHV.I am having the exact same issue and I was told that the warranty was null and void on the new water heater because it was a replacement. They replaced a defective water heater with a defective water heater. I called the number given to me by Lowes 1/877/817/6750. I spoke with Nichole. I told her that I should not have to pay for replacement parts for a defective water heater. I told her that I was never informed that there would not be a warranty. I live on a fixed income and cannot afford to buy another water heater because I was given a defective water heater in replacement for a defective water heater. I became angry stating, Thanks for nothing and I hung up. So many people have the same problem with these water heaters that something MUST be done.

Whirlpool Cabrio HE washing machine - I was very excited when buying this product. It never really washed clothes thoroughly. I kept getting strange stains on them and even after emptying it as soon as it finally was able to finish a load without saying UL constantly... the clothes would stink. Im sick I ever bought it! Plus, it rusts terrible.

Whirlpool washing machine M# wtw7340xw2 / S# c14270996 - Bought in 11/26/2012. Never was real satisfied with the way the clothes were washed. They never came out real clean and smelled like there was still soap in the clothes. It has been less than two years and now it will not run. Turn the unit on and all it wants to do is turn on the pump to drain the tub. Im a refrigeration technician and know how to run a diagnostic test Whirlpool has for this machine. I get an LF code which is water long fill so I checked out the water tube which is ok. So the problem is in the circuit board not sensing the water level. To replace this board is around $350 dollars and if I had someone else do the work I would be looking at over $550 dollars. I only paid around $500 dollar for the washer so it does not make any sense to put a new solid state board into this washer which cost as much as the washer. Our old GE washer lasted us for over 20 years and did a better job washing our clothes. There should be a better warranty on these machines than one year. I did not buy the extended warranty because of the cost and I expect that the product should last at least 10 years or more.

I purchased the machine December of 2010 from Lowes along with the matching dryer. I also purchased an extended warranty. A year ago July the lid on the washer broke at the hinges. I contacted the warranty provider and was told that the repair would not be covered under warranty and the damage was operator error. I purchased a new lid for approx. $250. One year later the replacement lid broke in the same location. I have tried to get a response from Whirlpool no response. I contacted Parts Select and inquired about changes that should have been made to correct the lids. He was not aware of any changes but did advise that the part had a new number which he indicated probably meant a design change. I ordered a new lid just under $250. New machines have a metal frame around the glass instead of the plastic frame which keeps failing. The springs that hold the lid in the upright position are so stiff I can hardly move them by hand. I am very disappointed in Whirlpool quality and consumer support. I will not purchase any more Whirlpool products.

I purchased a Whirlpool oven 14 months ago. I just paid it off 2 months ago. The oven stopped heating. I talked to Whirlpool... and basically because I did not purchase the extented warranty I am SOL. I will never buy a product from them again. Complete junk.

The first Front load Whirlpool washer leaked. 5 repair techs visits. Wasted days. Finally located the leak, in the main basket. Replaced washer. Second washer the clothes come out smelling like a horse blanket. Mold. Clean the washer every month still mold. Plan on junking the washer a getting a new model. Never expected this much trouble and time on a basic appliance.

Takes 2 or 3 full cycles to dry small load. Big disappointment, drying is such a horrible experience since the clothes never dry when I expect them to. Not satisfied at all.

Whirlpool Duet Washer Trouble. Im having the same issue as Tom in Oakville. The F35-Sud errors pointed to the pressure sensor - NOT. 2 parts, a technician visit, and $800 later, Im still waiting on a Main Board replacement that is on nationwide back order. Time frame unknown.

My Brother-In-Law bought a Whirlpool Gas Water Heater from Lowes last year. The Water Heater was still under warranty and would not stay lit. He called Whirlpool and they told him to send them a picture of where the water heater was installed (really? a picture). They told him he could not order the replacement part which was a Thermopile because he had to have a licensed person install it? Really? In your own home? My husband finally got Lowes to order the part because Whirlpools only help was for him to purchase a new water heater and Lowes would give him 10% off a new one. Lowes and Whirlpool have a monopoly on water heaters. Whirlpool is the only brand that Lowes sells. So if you want your warranty to be good on a water heater DO NOT BUY WHIRLPOOL.

In 2008 I bought a Whirlpool range from Lowes. About a year ago I began to notice an electrical smell when I would use the oven. I called the repairman in October and he had to replace wires that had melted. The first time using the oven blew a fuse. Repairman came back replaced everything for free and it has worked fine since October. 2 days ago the fuse blew again. When I flipped the breaker in order to use the cooktop there was an arc flash which blew a hole through the back of the panel on the stove where the cord is hooked to the stove and a hole burned in my wall. After reading Whirlpools fan mail I see that there are severe issues with the quality of Whirlpool products. It is a sad day when the names we have come to trust are more concerned with the bottom dollar than with customer satisfaction with their product.

April 14, 2014: Bought Whirlpool 30 electric stove WFE361LVQ Sept 2009, $545 - only 4.5 years old. While broiling, got strong electric burning smell, filled house. Broiler and oven stopped working (top burners OK). Opened back and found BURNED CONTROL BOARD corner and BURNED OVEN FEED WIRE. Definite SAFETY HAZARD. New panel $289 and wire harness $105 + 25 = $418, discount to $375, + service call to find out why/install guarantee $129 = $505. Ridiculous! Will contact Whirlpool for recall and compensation. Hope other recent entry sees this. (How respond to specific entry, since this response pulls us away from listings?) Meanwhile, well buy any other brand replacement.

I purchased a new Whirlpool washer, from day one it did not work, for the past month I have been trying to fix the problem with service people. The service people were at my house 5 times without any positive results. I was told by Whirlpool representative that they will not replace the washer or give me my money back, they have 12 months to fix the problem. I have never seen such a bad customer service and arrogance towards a customer. I will never buy anything manufactured by this company.

Although stackables are a little pricey, Ive had this dryer for around 10 years and its still working just as good as the first day! Never had any repairs done on it. Great dependable dryer and washer!)$ Ive dried regular size loads in it also! A loyal appliance through and through! Thanks Whirlpool for such a great and dependable product! Whirlpool Heavy Duty-Automatic Dry Miser-End of Cycle Signal*3 Cycles.

I made the mistake of buying a whirlpool product and was wondering if there is a support group for angry unsatisfied customers? I have owned a duet washer and after 2.5 years is giving F1E2 error and is junk.

I purchased a brand new 2019 Whirlpool side by side refrigerator in October of 2019 for my new house. Yes, that was 2.5 years ago. HOWEVER, I live alone and hardly ever use the ice dispenser. Maybe, it was used 20 times in 2 years. The ice dispenser just stopped working and today I notice the refrigerator is not even making ice! What a piece of garbage!

Will never buy another Whirlpool/GE product again. Nothing but problems. Paid $1700 for a Whirlpool/goldstar refrigerator 2 years ago. Problems from the start with slide-out shelf cracking, evaporator fan burnt out within 2 years, digital display cannot read anymore. Now have another problem again - not cooling. Going to the trash. No wonder your stock price have dropped. I would sell off to. Whirlpool/GE have been going down hill for the last 5 years. Maybe more. Cheap products, do reflect, it just a matter of time, I would think you would address these issues in your product line, but it shows your company is all about profits instead of quality of products. Keep going like you are, and you will be bankrupt. Cheap overpriced and nothing but junk in any products you manufacture.

We purchased the Cabrio washer & dryer with 6th Sense technology in 6/2007. What a mistake it has been. We have had 3 F1 error codes that a repairman has had to come fix all about a year and half apart. It makes crazy loud sounds if it decides to actually spin in the final spin cycle. It normally does not spin. It just always flashes UL for unbalanced load. We are extremely dissatisfied with this set. The dryer heating element has gone out also. We just purchased a new part. Prior to this, we had a hand me down washer & dryer that worked excellent. We regret getting rid of them, and now need to purchase a new washer & dryer. Whirlpool ought to stand behind its products and get this fixed.

Purchased 03/28/13. Refrigerator 62 degrees on July 4, 2013. Called for service July 5 - came out July 9 and told unrepairable - wiring harness set against tubing rusted and broke wires. Since July 9, I have been trying to get my replacement from Whirlpool and always told they will call me 24-48 hours - never calls. Asked for supervisor on July 22, then asked for her name and direct number. Supervisor said someone would call me about delivery. Supervisor told me if a local store would have had in stock, they would have sent it out from there (called local store and was told 6 were in stock and could be delivered tomorrow). Tried to call supervisor back to inform her, but number would not go through (apparently bogus number). As of July 22, 2013, still no refrigerator. Very poor customer service/service repair. July 24 - asked if I needed to get an attorney and/or contact local new consumer advocate - Whirlpool said they would issue a refund check for the refrigerator, and that I should receive it in 14-21 business days - said they could not refund on credit card I used to make original purchase. Hopefully, the check will arrive.

I bought top of the line stainless steel Whirlpool kitchen appliances two years ago. Warranty has expired. Microwave error message showed need to shut door and press start. Door was shut, opened and shut door 20-30 times for microwave to start. Had to buy new Microwave. Now dishwasher now will not drain. Refrigerator ice-maker dispenser is too small and ice keeps getting stuck in dispenser. I am done with Whirlpool.

Our new refrigerator was delivered on March 28, 2015. On May 31 as I was opening the door, the top of the bottom door handle broke. I was finally able to get a door handle shipped to my home and I replaced the handle. On July 21, I am opening the door and the 2nd handle breaks in exactly the same place again. Two broken handles in less than four months. Terrible design flaw in this door handle. Now, I am being told by a service representative that the handles are only warrantied for 30 days because handles are cosmetic.

Refrigerator door display cable failed. The company declared refrigerator is beyond repair. Cable must be replaceable, we cannot throw refrigerator for small fault. The cost of cable is hardly Rs. 200 and refrigerator cost is Rs 25000. It is a design fault. Company has to replace cable.

Six months after purchasing my Whirlpool Washer model number WTW5000DW0 I would hear what sounded like rocks in the bottom of spin drum during spin cycles. Then noticed it was taking longer for clothes to wash and sometimes the water did not completely drain. Called for Service under LOWES warranty (the worst people to deal with). Tech comes removes a penny and dime and tells me that is the problem. Leaves. 45 minutes after he leaves there is the noise again. Call and set up for this Service Company to come back. Even though they went out of business prior to the appointment Lowes Service would not listen to me and insisted I stay home ALL DAY for someone who did not show up. Repeated calls to the Service Company resulted in nothing - phone disconnected.So finally after much frustration I am given new appointment with new Service Company - PARRISH. Tech comes in here five minutes and wants to know the sound, I explain. He checks out the unit and tells me it is a major problem and the part and labor will be costly. Best if they just replace the machine. His added comment - I see a lot of this. So if this machine is such a problem why was it not recalled? I am getting a replacement as I have warranty and machine was not a year old when problem started. Lowes Service Contract is another problem but I will deal with that later.

I purchased Whirlpool Refrigerator model WRF989SDAM02 in June of 2014. I began having problems with the ice forming into a solid block shortly after having the refrigerator installed. I called for service several times over the next year trying to rectify the problem. Once the warranty had expired I continued upon the advice of Whirlpool Customer Service to schedule their certified Technicians to work on the problem. A year and a half and several hundred dollars later I am still unable to get ice cubes when desired.Ultimately I was advised that I would need to use the ice maker once a day to keep it from forming into a block. When this didnt solve the problem I again contacted Whirlpool, had another of their recommended service technician come and give his advice. I was told that the ice maker needs to be in constant use or it forms a block and this is a defect in the design of this unit. A Pro Tech Appliance Inc. Technician, an authorized Whirlpool technical representative, said the only way to have usage of ice would be if I made sure to dispense ice a minimum of 8-10 times a day.This is completely impractical and just plain ridiculous. I contacted Whirlpool again. They refuse to acknowledge this is a defect in the design of this model. I have replaced all parts that can be replaced, had the unit resealed and have paid for multiple service call. Whirlpool will provide no remedy for this problem. Now that the unit is out of warranty they have refused to provide a resolution even though its issue began while still covered under the year warranty. The ice in the ice maker is completely unusable and melts into a solid block within 24 hours if not in continual use.

I purchased the French Door refrigerator only 7 months ago. It has been emitting a low pitched, loud, vibrating hum for days. I called the company and spoke with a well-trained representative who informed me that there needs to be a service call. When I mentioned that this did not indicate an acceptable situation for future dependability, I was pitched to purchase an extended warranty. Further… this company doesnt monitor Consumer Affairs. Quality and standing by a product are manufacturer qualities that were not evident during the call.

Whirlpool model WRF560SMYB04 - We purchased this model Whirlpool in Dec 2015 after having a refrigerator for 18 years with no problems. We started having cooling issues in late 2017 and finally an intolerable fan noise in April 2018. Researched it and purchased a fan. Opened up the freezer panel and found that the unit was completely frosted up to the point where ice had formed around the freezer fan and was hitting the blades. Contacted a repairman who came out and called in the issue to the Whirlpool tech line. He was told that he should check continuity on a couple of wires. If these checked out, the problem was the user interface board at the top of the refrigerator. We purchased a new board for about $100 and installed same. No change. I was now $250 into repairs and no further. We became aware of Whirlpool Service Pointer W10875533A which described conditions that we were experiencing. The issue was a coil thermistor that would corrode (apparently within 2 years) and would not provide accurate signals. Whirlpool also issued an instruction sheet W10902213 Rev A describing how to relocate the thermistor and protect it with foil and tape. My repairman came out, confirmed the thermistor ($54) was bad, replaced same following the Instruction Sheet. We were now out over $300 on a $1000 refrigerator purchased 2 years earlier.Whirlpool issued the Service Pointer (not to consumers, but to repair shops) in Sept 2016 (within our warranty period). We received no notifications from Whirlpool of the defective design. Nor did we receive a recall notice. Moreover, Whirlpool tech group must have known about this issue, but instructed my repairman to replace the interface board. Whirlpool knows they have a defective product out there but are doing nothing to inform the consumer or stepping up to correct the problem. We have contacted Whirlpool to recover our expenses...will let you all know how that goes. Anybody interested in pursuing a class action?

I have had almost all the same issues everyone else who reviews the Cabrio WTW7800XWO washer. Now, the spring loaded lid wont stay up, so we have to use the Downy bottle to load the clothes. Thankfully, I have not had the lid crack... yet. We have had it serviced once while under warranty, that tech told us it wasnt good to wash small items, like socks. Are you kidding me? Now, the heavy lid falls on you while you are loading. I also have the Cabrio dryer, and we have fixed that more than the washer. DO NOT BUY A WHIRLPOOL CABRIO. We bought it because it was the largest unit in the store, but it is junk.

Whirlpool cabrio mod. WTW7300XW1 - I purchased this washer Nov. 2013. It did not work right from the day of delivery. Our clothes come out dirtier than before washing. Machine smells awful. I spend more in machine cleaner than in laundry soap. I have always purchased Whirlpool. Very dissatisfied with this model.

We purchased this machine new and took delivery on 5/21/11. We did not start using this until late August of 2011. In late November we noticed a loud noise from the washer. When we contacted the sales company that sent out a repair person who informed us the bearings were defective. We have been told the parts are on back order for another 2-4 weeks. It has already been 4 weeks since they were out. Whirlpool was no help. They first claim we must have overloaded the machine, then relented saying that things happen. Either way I am without a washing machine we paid $1000.00 for another month; yet they will not extend my warranty at least for the time my machine is down. I am now worried about the damage that this unit may have caused to my new home due to water leakage, let alone the added expense to due my laundry since I must now use a service to provide for a washing machine I own.

I bought a new washer and dryer 2 years ago, it was built by Whirlpool under the Kenmore name plate. In the first two weeks we had them come and service it as it was very loud in spin mode. The serviceman said they were all like that. Now, two years later, it is so loud you cannot even carry on a conversation while in the spin mode. Called for service again. After two minutes he says, You better buy a new washer, this one will cost over $800 to fix. Never will buy another Whirlpool appliance or Kenmore again. Buyer beware!

My husband and I purchased a Whirlpool over the range microwave in 2005, model number MIX155XHPT-1 and serial number TR S 30 32419. At first the top vent broke then the opening side broke off. Then the whole side of the closing door broke off. Now the whole door wants to fall off. I would have never expected this from Whirlpool, but it happened.

Purchased Model # wtw5000DW0 Jan 3, 2015. Aug 15, 2015 started leaking water. Certified technician came to repair. Aug 17 - new transmission. Sept 3 replaced new transmission with another new transmission. Sept 8 called master technician at Whirlpool, needs new clutch assembly. Both technicians stated they dont know what is wrong with the machine. Sept 10 new clutch assembly and agitator replaced. The machine still makes a horrible grinding noise and is unusable. The technician has replaced everything but Whirlpool says it is still fixable. The Master technician has no idea what is wrong with my machine yet he refuses to call it broken. I have been without a washing machine for 3 1/2 weeks. They refuse to offer a return authorization number. I have spoken to a Supervisor on the phone. She states the warranty is for repair. They wont admit their product is a piece of garbage. They have lost a customer. She stated she will put my complaint in a file.

My dryer lasted 18 months and then died! All parts have been replaced. $700 and highly rated, I dont know by WHO but would love to have a chat with them.

We bought a Whirlpool Cabrio in April 2012 and in July 2012, it started giving problems. It wouldnt start. It started humming. We heard money-like jingling noises. It stopped spinning and rinsing clothes. I called for service. No luck with that. So in order to wash, I had to drag the washer to the back door (which ripped up my new floors) hang hose outside for it to finish the load. Well a few months later, that didnt work so the assistant where it was purchased told us to cut the pipe down in the wall. Now we have a big hole in the wall. My floors are ruined and we are out getting another washer. This one is not even a year old. That was a $750 loss.

In 2007, I purchased two 30 gal. Whirlpool Flame Lock water heaters (Model: FG1F3030T3NOV) from Lowes for two different homes that I own. I started having trouble with one of them after about two months. I replaced the thermocouple several times, with each one working only about a month. After that, Lowes replaced the complete burner assembly and that, so far, fixed the problem.Now, the second one has (1 Oct 11) gone out. The local Lowes told me that they are out of the burner assembly for this water heater. I called them this evening and was told that they didnt know when they would have the part, but to call back about every other day to see if they had received the burner assembly for this water heater. They said that it could be from two days to two weeks before they may receive this part!In 2008, I also purchased a 40 gal. Whirlpool Flame Lock water heater (Model: BFG1F4034T3NOV) for my house and no problems so far. In 2007, I even recommended that a friend of mine purchase and install one of these in a home that he owned. He did. I helped him install it and it later had the same problems! I am now needing a water heater for my workshop. What can I buy thats dependable?

I purchased this washer from Lowes 5 months ago. I did not purchase a store warranty. Started having problems 60 days later. I have to deal with a Whirlpool rep. The company is 150 miles away. They have been to my home 3 times to resolve the issue. They replaced an air trap. The problem... my clothes still wont spin dry!!!

We have a small space that fit a washing machine and figured we could add a dryer on top but didn't have an outside vent, so took a chance in this model. It fit perfectly in the space and saves us from a regular trip to the laundromat. It takes a bit longer to dry but is energy efficient.

We Purchased our KitchenAid refrigerator from Home Depot. After 1 week we had issues with the ice maker, water dispenser and lights going on and off randomly. Technician comes 5 days later, he half way fixes it and discovers we need to order a part. The part took over a week to get and by the time he shows up to fix the refrigerator, it has now been TWO WEEKS with out our $4,000 refrigerator not working properly. Well, after trying to replace the part and spending 45 minutes on the phone with some engineer, it still wasn’t fixed. He Says to us “hey good news youre getting a new refrigerator”. Good news my **. It’s now been THREE weeks and it turns out the new one isn’t coming for another week. Customer serves reps. are really good at apologizing for the inconvenience but Whirlpool has Done NOTHING to composite us. DO NOT BUY WHIRLPOOL.

Whirlpool’s WFG505M0BS is a reliable gas range. It doesn’t have a lot of bells and whistles (no self-cleaning mode or convection oven), but it’s also not priced as such. If you’re looking for an appliance that’s sleek, smartly designed, and quick to heat up, it won’t disappoint.

I dont take pleasure in writing this review and to the readers, please know that this is the truth without bias. Before you buy from Whirlpool or purchase their extended warranty, you should know: I am writing this review based on my personal experience. I purchased the extended warranty in 2017 (approximate) for three years. In 11/2018, our Whirlpool dishwasher, model wdt920sadm2, which was purchased with our new home in 06/2016, began having issues and was not drying the dishes properly. I called Whirlpool warranty and requested service.Approximately 10 days later, a repairman from Convenience Appliances Service Inc. (repair tech) came and fixed that problem (wasnt drying). My wife turned on the dishwasher the very same day and we came back and the floor was flooded with water. We believe this was contributed to the initial repair and has never happened prior to that. Fast forward, approximately 5 service calls or more later (not embellishing), the dishwasher is still not repaired and the technician can’t figure out where the leak is coming from. On 02/25/2019, I received a phone call from Ms. **, Whirlpool/AIG care team (AIG is the underwriter) and was offered $540.75 and I would be required to complete a “proof of destruction affirmation” form.I accepted the offer and received an email the same day stating: Thank you for contacting Whirlpool Extended Service Plans Consumer Care Team. Per our conversation, I have attached the affirmation of destruction for your dishwasher. Please verify the information, sign, and return to us. Once we receive the affirmation of destruction back, we will start to process your prepaid debit card. That card takes 10 to 15 business days to process and will arrive to you by FedEx. If you have further questions or concerns regarding your Whirlpool appliances, please contact us directly by calling toll-free (866) 931-7390 to reach a representative for immediate addressing of these issues between 7 a.m. to 10 p.m. ET daily, or by emailing AIGservice@whirlpool.com whenever the need arises. Sincerely, Mable. U.S. AIG CARE TEAM.That same day, I received an emailed the affirmation of destruction form back to Whirlpool on 02/25/2019. I was impressed at the time that they reviewed the repair case history and made this fair offer. My wife and I began to look for a new dishwasher and canceled the future service appointment with Convenience Appliance Services because of the offer and acceptance. On 03/01/2019, I received a call from Convenience Appliance stating that Whirlpool contacted them and they are taking back their offer because their employee (Whirlpool) didn’t follow the terms of the contract. I called Whirlpool/AIG care team and spoke to ByonBera who stated that she was sorry to hear this complaint and would forward this to her manager for resolution. On 03/04/2019, I received an additional call from the Convenience Appliance Services Inc. and they stated that Whirlpool representative was not very nice to them and that they still wanted them to come out again to my residence on 03/11/2019. On 03/04/2019, I called Whirlpool/AIG care team again, and spoke to Tandy, who again apologized and read their company script and that they are sorry but still reneged on their offer. She then transferred me to John, who again read through his script/terms of the policy. I explained in detail that Whirlpool contacted (as per their email) me directly and they made the deal. I never called and asked. I completed the affirmation of destruction as requested and was promised $540.75 within 10 to 15 days by FedEx. John stated that he would have to kick this up to their resolution department above him to see if this can be rectified. John stated that this has never happened where the customer is involved (mistakes are normally caught before the customer is contacted) and that he could understand my complaint and frustrations. I received a call back from John on 03/04/2019 that Whirlpool will not keep their offer and that a repairman will go out as scheduled even though they made the offer without solicitation! Incredibly upsetting and disappointed!!! I have never experience anything even close to this from a major company like Whirlpool. It is evident that they don’t keep their word, that customer satisfaction doesn’t matter even if they are 100 percent wrong, and that their dealing are very deceitful! We since canceled our order for a new dishwasher and are now forced to wait for the next repair attempts again. If you get anything from this long-winded review, really think twice of making a Whirlpool purchase, or their extended warranty! Whirlpool really could care less of their customers and in addition, their warranty, in my opinion, is a scam. After this I, nor my family will ever purchase a Whirlpool brand appliance again. So please be careful and learn from my experience. Never again! Whirlpool should be ashamed of themselves.

We purchased a Whirlpool Cabrio Washer in 2010. I have had nothing but problems trying to wash black/dark clothes, it leaves white stuff. I assume its soap scum all over the clothes. Ive tried cleaning the machine with Refresh more often than recommended and it still has the same problem.

I feel Whirlpool has a terrific portable dishwasher. I really like the way it is set up and it is a very nice looking unit. They could improve on their customer service towards their customers. My dishwasher got a crack in it at the top of the door where you open it and they would not send anyone out to fix it for me. I paid a pretty penny for this dishwasher and felt they should have fixed it for me. This happened in the 1 year warranty period. Otherwise I am very happy with it. I had previously had another one that lasted me 14 years.

We purchased the gold series model WDT790SAYM1 in 2013 replacing a 12 year old Maytag we were very happy with. The Whirlpool just does not clean very well and leaves dishes dirty no matter which cycle you use. The spray arms are cheaply made and do not work well. Its a piece of crap compared to the old Maytag. Do not buy any dishwashers from Whirlpool, they are simply inferior products and a waste of money.

We bought this Whirlpool Cabrio Platinum washer 1/21/12. After less than 2 years of use, it now sounds like a jet plane taking off on the spin cycle. It is the first Whirlpool appliance I have ever bought and IT WILL MOST LIKELY be the last. After years of using and buying Kenmore appliances I fell for the salesman pitch that this was a better product. After spending $900 on this washer new, Im now told by 2 repair places that service your products that the repair cost for parts is$450 and then labor will total over $700. NOW to add insult to injury, this same machine now sells for $519 new.

Moved to new house with new Whirlpool appliances, including oven, in August, 2015. I did not cook in oven at all until Thanksgiving meal. Had something spill over in oven. Spillover caught fire. Oven at 350 degrees. Complained to Whirlpool. A supervisor told me that it is normal for spillover to catch fire. They sent out a tech to check oven, and said I would be responsible for paying tech. The tech explained that unlike conventional ovens, this oven has heating elements outside of oven, so to get to the temperature of 350 degrees, the heat at the bottom of oven can get to over 550 degrees. He could not get Whirlpool to replace oven. I didnt have to pay, but now I am afraid to use it. Some of the finish on the inside of the oven was burned away, so it is not like I can trade it in. I feel the oven has a defective design if spillovers are supposed to catch fire while you are cooking, and the finish gets damaged. I will never buy another Whirlpool appliance again, if I can help it.

My best advice is save your money. Better off washing by hand. Bought a new RV that had Whirlpool washing machine. Used it twice and now it doesnt work. Whirlpool parts back-ordered till another month or more. I asked for replacement and they said sorry, our warranty only covers repair. We will not replace it. WOW What a CRAPPY Company. Dont even get me started on how many times you have to call their customer service to even speak to anyone. Im on my 28th call, their on hold keeps hanging up on you, or just says, Sorry we are busy, and then hangs up on you. No place for message or anything, just Bye! If anyone ever took my advice, Id hope this is it. DONT buy Whirlpool.

I purchased a Whirlpool Microwave GMH6185XVQ1 on 7/2010 for kitchen remodel. It needed a magnetron repair just after one year warranty ran out. I called Whirlpool and they agreed to repair. Whirlpool sent me an offer for an extended contract. I purchased it. Since microwave was out of warranty at time of contract purchase, I was told there would be a 60-day waiting period. Microwave broke again on 3/2012. I waited until extended contract was in effect. I was told since microwave broke before contract was valid, I would have to pay out of pocket to repair, then contract would be valid after that. It appears (per internet research) these microwaves have bad magnetrons that need frequent repair. I wrote to BBB to complain.

I purchased a 40 gallon water heater at Lowes and installed about 3 years ago. A couple of weeks ago, it got an upper sensor failure code on the gas valve. It would heat by resetting (turning valve off, waiting a minute and then lighting) but after a few minutes, it would fail again. I called the customer service and they mailed out a new upper sensor. When it came a few days later (I paid for shipping), I installed it but the same failure code. Again, the only heat I could get was by resetting the valve several times before a shower. I called customer service again, told them what I did and they said, Oh, the problem is the gas valve then. So they mailed out a new gas valve unit. It then came a few days later and I installed it according to the enclosed directions to the letter. Still got the failure code and still had to keep resetting it to get any warm water before a shower.I called customer service again, told them what I did and he said, Well, did you flush the water heater with apple cider vinegar before you installed the new gas valve? I said, No, it wasnt in the enclosed directions to do so. He said, You should have done that and it would have worked. I will send out a new gas valve. At this point, I blew up. Two weeks with no reliable hot water. I told him I want a new water heater and he refused. I asked to speak to his superior. He said no. Dont ever get a Whirlpool product. Some other crappy company builds these turds.

We purchased a Whirlpool Range from Brands Mart USA and did not try to use it for quite some time because our house was not ready to move in. When we tried to turn on the oven it would not come on. We called a repair service and was told the Motherboard was not working. We realize the warranty was out on the stove but it never worked and the stove is Brand New. We called Whirlpool and they was going to repair and changed their mind on December 18, 2014 at 8:54 am. Before that call we had spent quite a lot of hours on the phone with Whirlpool and Brands Mart USA.. We purchased three appliances from Brands Mart USA Range, Dishwasher and Microwave at the same time they were all Whirlpool products. What happened to Good Customer Service and Return Customers for Job Security? Well neither Company care for their customers. We did not break a motherboard for a stove oven because the range was never turned on because it was broken when purchased.. We are unable to get any help from either company. I talked today to ** & Supervisor ** from-Whirlpool and ** - Brands Mart USA, again no help. Why transfer you from one company to another for 1 hour and 45 minutes? WISH I COULD GET SOME HELP. And we wonder why companies go out of business - word of mouth complaints and especially with Senior Citizens like us.

Purchased the Cabrio top loading washer and dryer. Huge mistake. The clothes come out of the washer a tangled wrinkle mess. Have tried different cycles and water levels to no avail. Dark clothes have detergent streaks and lint. The dryer has a steam refresh cycle which Ive used to try and remove some of the wrinkles caused to no avail. Clothes come out with water spots. Ive only owned this dual for about 6 months. Take my advice and DO NOT PURCHASE!!!

Our $2000+ Whirlpool Gold just had the control board fail. After calling Whirlpool, local services and all national parts suppliers we were told each time the part is on back order until June. If this is Whirlpools way of generating new fridge sales, it does not work. No Whirlpool, Kenmore, Frigidaire or KitchenAid, all made by the same company will ever enter my home. The control board runs the fridge. Which executive thinks a family can live without a fridge for 4 months? What terrible service. GE always has parts and service. Go with GE everyone.

Bought a stainless steel Whirlpool Gold bottom freezer in 2011. I purchased an extended warranty from Lowes (4) years, and still have another year left on it. Im constantly having to mop up puddles that form under the right front of the refrigerator. I read someone elses review with the same issue along with a sheet of ice forming in the bottom of the freezer and having to chip it out so the freezer drawer will close! Im calling the warranty company today.

After 25 years my Maytag died. It was a Sunday so we just decided to go to Lowes & purchase a new one. They could not find my 1st choice so I bought the Cabrio. It is the worst washer I could have purchased. It determines the amount of water you need. Our clothes never seem to be clean & its very noisy. It has no agitator & is supposed to save water. Even putting it on the longest cycle our clothes do not appear to be clean.

In less than 4 years the top lid broke at a poorly designed hinge point (+$200). Cabrio washer mercilessly tangles/twists clothes; HE does not totally rinse all detergent from clothing necessitating extra rinse (so much for efficiency); now at 4 year point bearing has gone and machine sounds like a freight train (+$250). Do not recommend this item if this what to look forward to. Called Whirlpool initially about tangling/twisting problem and just got lip service about arranging clothes. Duh, did that already.

Whirlpool Slide-In AquaClean Technology - My beautiful, modern oven is no longer. After 4 tries doing self-cleaning my oven was still dirty. I did have to wipe out the water (although I measured it) before I could take the scraper/sponge provided by Whirlpool to assist in the cleaning. Scraper bent - sponge disintegrated and I still have a dirty oven. Called service. My pleasant service tech informed me the water is only to reach 250 degrees! Really! My dinosaur of a Whirlpool cleaned fabulously! New technology has turned mine into an on your knees, scraping and broiling fool. Fool because I bought into the whole Aqualift Technology. We cannot use any kind of liner, etc. This slide-in may look great but the labor required to keep it that way is beyond this OCD person! So much for my efficient new kitchen. May the engineers who designed this technology be ashamed of this product. It is not even a self-steam cleaner!

We bought a brand new Whirlpool dishwasher around 2 years ago. Within 13 months it stopped drying dishes, silverware etc. I called customer service told the person what’s going on. Of course the warranty was up, a month prior. She said she would send a service technician out to see why it wasn’t drying. They charge 75$ a hour plus a service fee for coming out. I told her no. She said she would drop the service fee since it was only 13 months old. I asked how long he would be here, she had no idea. I didn’t make the appointment because I felt I shouldn’t have to pay anything because it was only 13 months old.She didn’t agree. Since then it has gotten worse, it doesn’t dry anything, maybe the dishes. I have to put the silverware rack on a towel by and dry the silverware or put it away wet. I’ve bought jet dry a few different ones and no luck. I would not recommend anything from Whirlpool, especially a dishwasher. We have new wood cabinets. The cabinets will get soaked if I don’t put paper towels under them. This is the worst dishwasher I ever owned. Don’t waste your money!!

Washes great. Love the literal bells and whistles. Never has failed to give the family a very clean wash. Price was great and got the matching dryer too. I have heard prices have gone up but this washer is worth every penny.

Purchased my Whirlpool gas hot water heater. After 1 1/2 yrs, the blinking light shut off, called tech at Whirlpool, made me move hot water heater to outside. I moved it outside and when called back, I was then told to send 4 photos to prove that I moved it, in which I did that. He told me that still was not right... and still he would not help with reset. I live in my parents old home w/ water heater in bathroom for 50 yrs. No problem... it was vented thru ceiling to attic. Now it is outside, unlit, in a steel hub (as directed) and still not ok...I have no hot water and have not for 4 weeks now... Whirlpool sucks... never buy their hot water heaters. Had to pay a serviceman $750 to move heater, run cold/hot water lines and gas line and it still does not work... with NO HELP from Whirlpool. Now I am in process of buying an electric hot water heater and have to pay an electrician to run a 220... I am on fixed income and this stinks... biggest regret... WHIRLPOOL.

Back in the day GE appliances were made to last and last - the only one I have found close is Whirlpool. They have style, dependability and long lasting products. My washer machine has a ton of features and I didnt pay more for any of them.

I have a 2 year old Whirlpool refrigerator with french door refrigerator on top & freezer on the bottom. I am now spending almost $700 to have a new compressor put in because Whirlpool wont back their products.

The only model number I can find is W10484489A.... Do NOT buy this machine. It is pathetic!! This machine cannot handle more than 2 bath towels at a time!! It will just keep trying to spin, yet NOT spinning, then when you stop it, there is no choice to just spin again, you have to rinse and spin!! Unbelievable.... takes a whole evening to do one load of towels!!! (actually a whole evening to do 2 towels) I hate it!!! Not to mention, whatever they designed between the tub and the door, a rubber whatever it is, is nothing but a catch for disgusting bacteria and slime. Considering the amount of wash I DONT DO, this is unacceptable, even though I have bought and used the new washing machine washing stuff!!! Honestly.... had a Maytag Neptune before this machine..... that is the way to go folks, pay a little more, but way more satisfied. Cleaned like a gem, unlike this whirlpool, cleaning is at best mediocre!! Unfortunately, I broke it, asking it to wash huge 120 in round table cloths for my business, and heavy chair covers..... Had I have know.... cant even wash 2 towels in this new Whirlpool machine!! It is heading to the curb with all its disgusting places you have to clean, I will pay someone to take it away, seriously cost me a ton of money in re-spinning (or yeah, and re- rinsing, cause you cant just spin something), would have been better to fix my MAYTAG!!! I hate Whirlpool!! Do not buy one!!

I took the Sears salesmans suggestion and bought a high-end quiet dishwasher. It worked wonderfully until it sprung a major leak. Computer told me the phone # to call. It took a week for the Sears repairman to come out and $79 fee to just look at it. He said the fitting between the sump and the pump came off and flooded water over the electric motor. Electric motor is shot! Cost to repair is over $400 and a 3-week wait!!! When and if a new motor is installed, only then do we know if the computer is also fried. This was a high-end dishwasher. Factory warranty just ran out. Repairman said this is a common problem with this model. DO NOT BUY THIS MODEL.

I bought Whirlpool front load washer at Sears in June 27, 2012... (serial W104408696A) (W10409178A-SP). I had 6 episodes within a 1-year time that my clothes got burn holes and the inside of the washer. I would find a handful of gray powder after doing my laundry. The first time it happened, I thought that I left something inside my clothes that resulted to it, but I did nothing to contribute to the event. The second time it happened, I thought Im putting the wrong setting, so I chose another setting to wash my clothes. In that span of 1 year it was on and off happening. I read different reviews on this washer, and I am not the only one whos had this problem. Finally in 2013, before my warranty would expire, I requested for Whirlpool to fix the problem. Right away the tech told me that the problem was the glass covering, so they replaced it. Now my washer would not drain. I believe that this product does not belong in the market. If they knew what the problem was, they should have recalled it. I kept the sample of that gray powder.

When I grew up, my mom and dad had a Whirlpool dishwasher and it was the ONLY dishwasher we EVER had. The SAME one, for over 20 years! So, with confidence, I purchased a mid-range unit. (over $600 2015). By 2016, ONE year later, I was already buying replacement parts because the top rack was falling apart and the bottom spinner broke as well. The parts were extremely expensive and hard to find. Now, a mere 4 years later, you cannot find ANY parts for this machine and there are so many issues with the unit. It is no longer functioning. When it did work it ran for 4 HOURS!! Even then, the dishes are filthy. I am so upset by whirlpool. I want a full refund from the company for treating their loyal customer so badly.

If you have the double oven below with bad board, start shopping for a new oven, but the part is no longer made. How can you end of the life a product after only 6 years? This is about the RBD305PDS12 double oven! I have wasted 3.5 days with Whirlpool/Maytag. Its very Frustrating how each department passes you along and makes promises about what the other department can do, resulting in zero satisfaction. None of them are well informed to say the least.I have a 6-year-old double oven that has a bad board and after 3 days, I find out it is no longer made. I paid $1500.00 six plus years ago and now I get to spend $2000 plus to get a new one. Again, how can you end of life a product after only 6 years?

Purchased a new Whirlpool water heater from Lowes. Two days into the reset switch kept tripping, Whirlpool wanted me to wait for someone to repair it. Lowes exchanged it for me. When I called Whirlpool service myself, Jessie was in technical support could have careless about my business and was dismissive about any issues or concerns I was having. This will be my last Whirlpool product ever.

Just bought a Whirlpool stove (WFE540H0ES) from Home Depot. Oven gave off so much heat around the handle that I burned myself opening the door... Tech came out said it wasnt supposed to do that. Called into Whirlpool to get clearance for a replacement and corporate says no to the replacement because that is normal. Thats BS! If that is normal DONT BUY A WHIRLPOOL!! BTW... They are owned by Maytag.

Purchased my Whirlpool Duet front load washer WFW9150WW00 new in 2010. Also purchased extended warranty. After four years, just before my extended warranty was up, the entire inside needed replacing (drums, bearings). Now at only five years old, it keeps making a beeping noise in middle of wash cycle and wont continue working. Serviceman was told by a Whirlpool tech. that it could be two things, one being the door jamb, the other being the control panel. Door jamb was fine. Ordered new control panel ($240), had it installed and yet the washing machine still keeps beeping and doing the same thing. The serviceman doesnt know what else it could be. So, I am forced to return the part and purchase a new washing machine. I would never recommend Whirlpool to anyone!

On 11-29-2014 we were washing our laundry and our whirlpool washing machine started making a really loud noise so I went to investigate the problem. I open the bottom part of the washer to find out that the whole cement block to balance the drum was on the floor of the washer so I called the 1800 number on the machine and no one at whirlpool corporation wanted to even help. No one said sorry. No one said Let me see if I can help. No one. Every one I talked to they cant help at all. No one apologized once about the poor product that whirlpool sells and the defect that their products has. My washer is one year and one month old. So I can say truly with confidence that whirlpool product are the worst in the world plus their customer service even more. It is very sad after we paid all kind of money for our washer now I have to buy another one after one year and one month. Very bad customer service.

I had the junky gas water heater for two years and cant keep the thing lit. Calling Whirlpool does no good. They give you the runaround; the store cant do anything. They know they have a faulty product and keep selling it. Some companies are only out for the money. If that wasnt the case, they would discontinue the junk. They will send you replacement parts but if you know nothing about them, you have to put out more money for someone to come and fix it. I would love to send them the bill! I would not recommend this brand of anything to anyone.