We purchased this Gold Series Whirlpool Dishwasher about 4 years ago. It worked very well up until April of this year. At that time, the main pump stopped working and it has to be replaced. There are just two of us in the household so the dishwasher was only used 2 or 3 times a week. We also kept it very clean with no build up. The gasket around the soap dispenser came out and one of the wheels fell off of the bottom rack. We just feel that 3 1/2 years is too soon for a major appliance to stop working and fall apart, especially given the light usage.

I have owned the machine for 1yr and 6 months, bought new from reputable company. The washer always had kind of a clunk sound which the manual says is normal. Clothes would have white marks and streaks after was but disappear when dry. Clothes would seem damp, never like they were completely washed. Went to do a load last night and thats when it stopped working. Powered on, cycle selection was fine, lid locked, typical clunk noise, then nothing, no water. Paused the cycle, lock lid light flashed but didnt unlock. Machine powered off on its own and unlocked. I powered it back on after 30 minutes and it wouldnt let me change the cycle, panel selection was frozen. So I powered it off and contacted repair. They think its the water inlet? Pending repair to see for sure. This is not OK! I had an older machine from the 90s that was still working before I bought this one. So sad to have this type of product from this company.

This is the second time since I have bought my Whirlpool top loading washing machine, which was January 1, 2011. During a power outage, I was washing clothes and my machine lid would not unlock after our power came back on. I called the warranty service and they made arrangement for a repair man to come out to repair it, but the appointment was in two days. Meanwhile, I had clothes in the machine I needed and was afraid they would become molded and no good. So my husband opened the lid and I removed the clothes. When the repair man came, he was not going to repair the machine because we opened the lid. He was very rude, but after doing some talking he repaired the lid. Now, once again we had a power outage while I was washing clothes and the lid is locked on the washing machine and will not open. This happened Friday, March 16, 2012; my appointment for the repairman to come is Tuesday, March 20, 2012. Meanwhile, my clothes are sitting in the machine wet because we were told not to try to open the lid and wait for the repair service to come. I am very concerned my clothes will be molded and I will be unable to use them. I would never buy another washing machine like this one. Model number is WTW4800X, Standard/Ordinaire VOXr8ENA(3B). Date of purchase: January1, 2011.

Unfortunately where I live the walls are thin. And my neighbors have complained about how loud my washing machine is. I load it correctly and sometimes while it’s washing it rearranges the clothes and it becomes unbalanced and makes incredibly loud thumping sounds when this happens. I’d say 1 out of every 4-5 times. Also I have multiple towels and clothing that have been pulled. The threads of brand new towel sets ruined from the washer.

Whirlpool Gas Range model GW397LXUB1 is a lemon. We bought our house new in 2008, and it came with Whirlpool Gold package appliances. Within a year, the console buttons quit working for the oven, and we had our warranty fix the console. Within another year, it happened again, and then again last November and now again this week. This range is obviously defective, yet the only solution was to buy for $350, a one-year warranty from Whirlpool. I asked if they had any sort of redress or rebate if we bought another unit, which they reported no. So I looked online for other people who have had similar issues, and counted at least 75. So this company knows they sold defective units, but wont stand behind them without substantial cost. All this simply assures me is that Whirlpool is NOT a stand-up company, and I can assure you that Ill never purchase any product from them again.

Whirlpool Cabrio washer - Do not buy this washer. I have never placed a comment on the web before, but after reading about the same problems over and over, there should be a class action suit. The spin cycle will not balance. You have to stand over the washer and readjust the laundry. I called Whirlpool and I was told to unplug unit for 5 mins. This is a $800 washer that lasted about 2 years.

When I first bought this machine I loved the big tub, but I was concerned that there was no agitator. It confuses me how clothes can get clean if there is nothing to rub them again. Even in the olden days they rub clothes against a board. Well my concern is valid and I believe the washing machine industry needs to go back to the old model, as this new version does not work.Here are all the problems: 1) The machine judges how much water to put in. This doesnt work. I follow the directions and outline the perimeter and dont overload, yet still it just barely puts in enough water to make the clothes wet. Im all for conserving the environment, but enough water needs to be provided to actually get the clothes clean. I would like to be the judge of how much water should be used, so I would like to be able to tell the machine if it is a small, medium or large load. I do believe that the lack of enough water is why the clothes do not come out as clean as they should and why they end up smelling (see #4). 2) There is no agitator, so there is really nothing available to help clean the clothes. Spinning them around like a maniac is not enough, which leads me to the next problem. 3) The clothes come out twisted terribly and then many times come out of the dryer wrinkled because of how hard they were twisted. I tried to select a less harsh spin cycle, but then the clothes are too wet to put in the dryer. There is no happy medium.4) Biggest problem to date: Our clothes/towels have all started smelling. You know that smell when you leave your clothes in the washer too long (like two days) and then put them in the dryer? Its that smell. The clothes/towels dont smell when you immediately take them out, but they do smell at any bit of moisture. When I dry myself off after the shower, I notice the newly washed bath towel smells like a wet dog. I have used the pods, liquid detergent and powder. I dont remember having the smell problem when I first bought the machine and used powder, so I just returned to using powder today. (Ive even tried doubling up on the pods, but the clothes still smell.)This leads me to problem number 5: When using powder in this machine, the machine does not empty the powder container completely, and so the clothes do not get the required amount of detergent. Often there are clumps left over in the powder dispenser, but not always. (This is what led me to go to the pods and liquid detergent in the first place.) But at least with powder (I use Gain) my towels dont stink after the first time I used them.I wouldnt recommend this machine. I really researched machines before I purchased this one, but they all had bad reviews, so how do you pick? And I never look at the good reviews because we all know so many people are paid to rave about products they know nothing about, or it is a company employee writing the review. This machine is a huge disappointment. I am going to try adding a rinse cycle like a previous reviewer suggested. Maybe the extra water will help with the smell. Of course this is not good for the environment though, so this whole way of making washing machines with no agitator and limiting water defeats the energy efficient goal.

Thank you Michael of Castleton, NY, for the posting about re-setting the microwave when it stops heating. Even if I have to do it once a month, it beats having to go out and get another one. And when that day inevitably arrives, guess which brand Im steering clear of?

I just bought my washer 3 or 4 months ago. It is the worst washer I have ever owned. Anyone that has ever done laundry knows you need water to wash clothes. My clothes are not clean and my whites are very dingy. I use the same soap (Tide) and the same bleach (Clorox) that I have used for years. If I can find someone dumb enough to buy it I will sell it and get a good one. I would rather go back to the old wringer washers than this one.

Has multiple wash Cycles. Big enough to wash a comforter. Has a delay setting so I can set it 8 hours in advance. Easy to load, easy to add the wash ingredients. Its a top load so its easy to get everything in and out.

Oct 14th I walked down to our basement to find it flooded. Turns out the leak came from the solenoid that controls the water feed to our Whirlpool Gold Series refrigerator. Now, some $28,000 in damages later - floors/cabinets/walls/electronics - you name it. The repair company said that they replace these units a lot as it is simply a faulty design and Whirlpool knows this as this part is very difficult to obtain - too much demand. Well aside from the cost, the inconvenience, and the rise in our insurance rates the repair person said there was a good chance of the new part failing as well - it just cant take the water pressure as it is just cheap plastic. My advice - stay away from Whirlpool!

This is an EXTREMELY dangerous range. The burner knobs leak - turn on with just a bump and leak gas. Any slight movement causes the knob to move and allows the gas to leak before the igniter ignites the gas. Has happened THREE times!!!! Has this product been recalled???

I bought a Whirlpool Cabrio 1.5 years ago and it has already died. Repairman need to replace the control board which had gone out. $450.00 to replace that piece, but could not guarantee that it would be the only problem. The motor or some other issue may have caused the board. This machine was purchased at Home Depot on sale and at $450.00 to repair would be approximately 70% of the original price. It will be cheaper to buy a new one rather than fix this one. We were not happy with this machine in the first place. It leaves the clothes stained with a white powder that never rinses off. The cycle time is very long, up to an hour to wash a load. The clothes are still very wet once the cycle is finished, which of course increases the drying time. I cannot recommend Whirlpool top loaders after my experience with this machine.

I bought this appliance 9 months ago and it has broke 4 times now for the exact same reason. I have set aside 6 separate 4 hour windows for Diamond Factory service to come repair it. All four times, it has been repaired improperly or diagnosed as “nothing wrong with it”. My refrigerator constantly runs, eventually forms an ice wall of back of freezer, and then eventually ice gets so thick to where it stops regulating temperature. All four times, I have had to throw away all my food, defrost the fridge on my brand new hardword floors, and take off work so I can be home for these 4 hour window “service repairs”. They refuse to replace the appliance. UNBELIEVABLE. Never purchasing from Whirlpool or Home Depot in Sunset Hills again.

Purchased Whirlpool dishwasher and range approximately 16 months ago. Dishwasher must stop in middle of rinse cycle because the dishes always feel filmy and there is an inch or two of water in bottom. Must be bailed out by hand. Piece of garbage. Called Whirlpool and they can get us a service man from 8-4 (who waits an entire day these days) on New Years Eve. Next appointment is following week to examine and will fix (if it is their fault and for a fee). The last two dishwashers I purchased lasted 10 and 7 years respectively. Stay away if you dont want bad equipment, uncooperative service, and aggravation. Range I bought was OK but the oven temperature is always off 10-15 degrees from what it says it is. I honestly wanted to buy American but I feel cheated. Next time Ill try Samsung and see if they give a damn.

BUYER BEWARE!!!! Dishwasher less than 2 years old and pump & motor assembly went out. You would think and hope that an appliance would last longer than that... Contacted Whirlpool and they were not helpful at all. Will not be buying anything made by Whirlpool again...

I purchased new dishwasher, range, microwave, refrigerator, washer and dryer 16 months ago. I have had problems with everything except the dryer! Lowes even traded my washer in for another because it could not be fixed.

I purchased a Duet Dryer less than a year ago and it stopped working. Got the warranty people to send someone to diagnose it. The repair person ordered two parts to fix it (they took the control panel off the order for some reason). They sent a second inept person to try and install the part they did send and it did not work (He was the most condescending person I have ever met but that is another story.). Of course it did not work and they actually have to replace the control panel AND the electrical panel (which as you know was ordered by the original tech, but taken off the order by who knows?). Now they are telling me that the part that they should have ordered 2 weeks ago is on back order until sometime in May. All I am getting from Whirlpool is lip service and they honestly do not care one tiny little bit that I have a dryer under warranty that will not have been working now for close to six weeks. This is unacceptable business practices.For the record I bought the unit at LOWES and they too refuse to stand behind the product. Basically told me tough they have nothing to do with it. I also purchased an $8000 Kitchenaid (Whirlpool) Refrigerator 5 years ago and the control panel went out about 4 years later. They stopped making the part and I have to THROW away an $8000 refrigerator because they dont make the part for it. As evidenced above, Whirlpool products do not stand the test of time and when they do break (even under warranty), they cannot fix them in a timely manner or at all in the case of the refrig (not under warranty). I caution every reader of this diatribe to choose wisely WHERE you purchase your appliances and carefully select a brand other than Whirlpool (and its brand affiliates of Kitchenaid, Jenn-air, Amana and certain Kenmore products).

I purchased this Whirlpool washer (model WTW7600XW2) on October 2011. Fabric softener dispenser is full of water at end of cycle. Repairman has replaced parts three times, but the problem is still not corrected. Today, I talked with a Whirlpool supervisor. She says this is normal. She told me to take the cup out and empty it. The cup is not removable, so she said I could blot it out with a cloth or sponge. I paid $800.00 for a washer with an automatic fabric dispenser that I must empty manually. I have used whirlpool appliances for 50 years of marriage, but this is my last one. I am very disappointed with customer service.

In 2009 I bought 2 (yes 2) machines (one was for our daughter). I also took out 5 year warranties on both (good job I did). Within the first month on our machine the paddles flew off and after a bit of a debate with the insurers we had another machine (same model). Within a short period from date of purchase both machines had a number of faults - circuit boards, weights that came loose! and bearings going. There are other bits but too extensive to list. To be fair to the insurers they were no trouble (it really is the inconvenience of being without a washer and having to schedule time to get it sorted out). I will never ever buy a Whirlpool as all of these (3 in total) have been a nightmare and ours is sounding noisy again (it only had a new drum 12 months ago for bearings - yes you need a new drum for that £200 in all!!) so I am really glad that we have the insurance. When that runs out and the machine is dead (whichever comes first) I think we will will be buying either a Beko or a Samsung that are getting really high ratings. Anyone reading this might wonder why did we buy these in the first place. Well a colleague of mine at work had one and said it was fantastic (she had children so used hers a lot) hence me buying them (and they were not cheap by any means, so thought we were getting a cracking pair of machines....cracking, yes they might as well be as a chocolate fireguard has more reliability...WARNING DO NOT BUY A WHIRLPOOL WASHING MACHINE - IT COULD DAMAGE YOUR SANITY! AND FAITH IN HUMAN BEINGS TOO!!!!!

Bought a Whirlpool 25 cu ft side by side in 2011 and now just 4 years later the compressor is bad. Called them and they only have a 1 year warranty, which is nothing for a compressor. They told me for $350 they could replace it and it be good for only a year. Not going to sink more money into a product even the company has no confidence in. The repairman advised to stay away from Whirlpool as they were not the company they used to be. Also the salesman at Lowes where it came from said they used to have a 5 year warranty but changed several years ago and the quality also went down. We have had refrigerators last 25 to 30 years in the past but no more thanks to modern technology. Thanks a lot. STAY AWAY FROM WHIRLPOOL!

I bought a Whirlpool 5-burner gas range with double oven at a cost of $1700. Almost immediately, the finish above the oven started cracking and now is starting to chip off. When I contacted them, they stated cosmetics were only good for 30 days. We had just moved and were getting settled so we didnt use the range much for the first 30 days. I am very unhappy with this product and also unhappy with Sears for their lack of effort.

2 loads of clothes and it is broke. I tried to call Whirlpool to no avail. So I called Costco where I bought this machine. They at least talked to me. Promise to get a hold of me tomorrow. Brand new (2 days old) and this happened. Didnt even finish the second load.

I purchased my Whirlpool refrigerator about 4 years ago and havent had any problems with it. One of the things I like about it is it has adjustable shelves not only in refrigerator part but also in the door part so that you can put bigger items like milk, etc. in door. It also has crisp bin for things like lettuce that works very well.

I will keep this brief because many of our issues on our 18-month-old washer are in other reviews. The anger I feel towards Whirlpool Customer Service and the logic they use in providing repairs on a “goodwill” basis are unbelievable. After a Whirlpool certified appliance repair person diagnosed our fairly new washer as requiring the entire guts to be replaced... transmission, bucket, etc., we were told the repair bill would be over $1,300! Are you kidding me... the washer only cost in the mid $500 range, and now Whirlpool is going to do us a big favor and cover that outrageous bill! I told the customer service supervisor to please give us a new washer and take away our broken washer and use it for parts (if there any good parts left in this miserable machine). His reply “thats not going to happen”. He used this phrase to us at least 20 times during our service call until I finally told him I thought his attitude was aggressive and demeaning. I refuse to be bullied by a major manufacturer for a substandard product.I can only warn you when considering Whirlpool (and every major appliance in our two homes are Whirlpool) that you should use due diligence in your selection. We paid extra to upgrade all our Whirlpool appliances in our homes and I will never make that mistake again. And don’t get me started on the white film that covers my dark clothes. They say I use too much detergent... not true. I am not stupid and understand the HE requirement to cut way back on soap.

After the second year, everything stated to fail. The pump, the main control, even the mounting straps all failed. We are very glad we got the extended warranty. Parts alone have exceeded $400.00. Right now we are dealing with the loads not drying.

I see that I am not the only one with the same pilot problem. I just purchased this new model that came out last summer. I bought my new water heater in September and just this past weekend, it messed up. I have not had it for 8 months. Whirlpool sent out a technician yesterday and he said the assembly is not good and the pilot would not light. Well they sent me a replacement part and they are coming out today to install it. The funny thing was that the technician said, Oh, these are hard to work with. We have a lot of problems with these models and they just came out last summer. Its the on that has the little box and you push the pilot button in and hold it until the red light comes on. Anyway, he said he didnt carry parts for that one, only the old ones which last longer. The ones that have the black round circle that looks like a thermostat. I said, Really? Well the reason I bought this water heater is because my last one that I bought 2 years ago kept having the same issue. Whirlpool sent me the assembly with the pilot and all 3 times and would never replace it. I got tired of it always messing up so after having it for 2 years, we just dumped it and went and bought this new model. Here we are 8 months since we bought it and the same thing is happening. I am so furious. I am pissed off that they dont recall these if they are defective. Why do they keep selling them if people have problems? My cousin called me a couple of months ago and asked if my husband could check her water heater and its the same type I had and it was doing the same thing. I will never buy another Whirlpool water heater again.

I have 2 dishwashers. A stainless Quiet Partner III & a plastic Quiet partner II. The Partner III never gets the glasses completely clean. The cheaper Partner II gets everything clean but has had several service issues.

My NEW Machine Top loader HUGE drum. Have problems with clothes not looking like they’ve even been washed, Spun so hard they are twisted all to heck. And white stuff - my oxy powder maybe? Not dissolved. My old machine was a Kenmore 30 yrs old. Thought I’d be able to trust whirlpool but not sure. Am I missing something in the loading process. Seems to read something bout not Covering the knob on the bottom. Is this true?

I had purchased this washer from Lowes last September and had problems almost immediately. First of all the lid would lock and hold my clothes hostage till it decided to reopen which could be days. Finally it never opened again. Called customer service and sent someone out. It took almost a month to get it back to running. 1 week for him to show up then 2 more weeks for the part to come in 1 more week for him to grace me with his presence again. Had to call again because the mother board then went. Another month. Now just out of warranty I go to wash and its dead. No lights on nothing. This machine is the biggest pile of garbage and waste of money I ever spent. Barely made it 1 year.

Love the dishwasher, except the racking which has some top rack channels which are too small to be used by glasses, mugs, etc. The Power On/Off should automatically power down when the cycle is finished. Too often when someone leans against the dishwasher while opening the overhead cupboard, the dishwasher will start up because the unit was not powered down.

I bought a house and for the first time in my life, I was able to afford and buy all new Whirlpool appliances at Sears. I worked so hard all my life and was so happy I could get new appliances when I was almost 50 years old. Up until then, I could only afford to get used appliances. Even then I had to finance them with a credit card, only to be so sad and disappointed. They are without a doubt the ** junk I have ever had. I wish I could have all my old appliances back. My new Whirlpool flat top oven burns everything and has ruined all my pots and pans. I do canning every year and it has ruined my very old and heavy pressure cookers. Even when you turn the heat all the way to low, it burns everything. I called the manufacturer and they say they do not have to disclose that it will ruin your pressure cookers or burn everything. I am very angry I bought any Whirlpool appliances. I also got a new washer and dryer; they are junk too. They dont clean my clothes like my old washer and everything is so wrinkled up when it comes out of the dryer. I need to iron everything. I have never seen anything like it. I also bought a Whirlpool hot water tank that has now gone out 2 times in 5 years because the thermostat burns out. I pray it doesnt burn my house down one of these days. One of the times it went out, I was about 10 feet away from it and it literally blew up and about gave me a heart attack. It was so loud and scared the bejezzers out of me. Whirlpool, you suck. I have told everyone I can tell how much junk your appliances are. Your company should have to be accountable for selling people such **! I would sure like to be paid not only for the cost of these junky appliances but also all my quality pressure cookers, ruined clothes and distress this has caused me. They have no consequences. They have gotten away with ripping people off and giving a lot of us tons of stress, stress, stress, and anxiety, not to mention all the financial cost. Thanks, Whirlpool, you piece of junk! I think if I had not worked so hard to finally get what I thought at the time were high quality new appliances, I wouldnt be so affected but I dont have the money now to get new quality appliances. Whirlpool took my hard earned money for their junk.

I have been a dedicated Whirlpool customer for 50 years. I purchased my new, Cabrio washer and dryer in 2011. The dryer works fine. The washer does not. It ties everything in knots. Most everything comes out in one large, wrinkled lump. When washing sheets, it wraps the whole load in a soaking wet, fitted sheet bubble. You cannot wash one item by itself, because it will become unbalanced and shutdown. I will say that I havent had any repairs yet, but I have a feeling, its only a matter of time. I have decided to buy a new washer, but it will not be a Whirlpool.

We bought a new Whirlpool washer/dryer 6 months ago. Dryer is ok, seems to take a long time to dry. Washer is horrible. It constantly goes off balance and shakes all over the floor. Once opened, the clothing may be a little off, but not enough to cause such commotion. SO FRUSTRATING! If we could afford to replace these, they would be out on the curb today!

The machine is reliable, does not take forever to do a load, it is relatively quiet. It has sufficient options depending on the size of the load. Additional options are time setting, choice of warm, cold or warm/cold water settings. On light and medium loads it extracts almost all of the water; on heavier loads an extra dry spin does the job. In all the years that we have had it, it has required only one service call. The maintenance man told us that this model is the best in a series and he recommends that we hang on to it for as long as possible. We're very happy with it.

4 years ago, we purchased a Model UMV1160CW-3 over the range microwave. After 14 months the door cracked around the handle and eventually fell off. We made the HUGE mistake of buying the same model for ease of installation thinking that this would be a typical issue. We purchase another duplicate model in April of 2016 and less than 16 months later the same issue occurred. Spoke to customer service on 12/28/2018 and they told me that they would pick up the cost of the parts but I would be responsible for labor which actually exceeded the cost of the microwave. Exceedingly poor-quality product and support. Will not purchase another Whirlpool appliance.

I have a Whirlpool oven and dishwasher and have had nothing but problems with them both since day one! Our oven went out Christmas and couldnt get service on it and we were entertaining for Christmas. DONT EVER BUY A WHIRLPOOL PRODUCT!!! If you do you have no one to blame but yourself.

We will never, I repeat, never buy another Whirlpool, Kitchen Aid or Maytag (other than the Maytag dishwasher) product again. After just two years on the Cabrio washing machine, the bearing on the wash tub began to go out. As it was out of warranty, the cost to fix was greater than just buying a new machine. This was a known problem and Whirlpool failed to remedy the problem. Based on this experience, we went with an LG as a replacement. Before you buy anything, research it.

They really dont make them like they use to, do they? This Whirlpool Cabrio aka Caprio has given us problems for the past 3 years, weve owned it for 5 years. It doesnt matter how much, or how little clothing you put in this washer machine. It will start going NUTS, Thudding, Banging against the inside of itself, completely out of whack, and then it will show a UL where the time is shown. Every time we do laundry this happens, and we have to stick our hands in the hot water and reorganize the clothes, and pull more and more clothes out till theres only about 3 items of clothing left! This washer is GARBAGE! I advise people to keep away from it. The washer we had in the past lasted us years upon years. These washers of now in days are Crap Garbage. Keep the fancy tech look, and give me the old fashion Knobs ANY DAY! Whirlpool brand is Not what it once was.

I bought my Whirlpool over the range microwave WMH32L19AS November 28, 2015. We started having problems with it, working intermittently one year later. I called Whirlpool in January 2017 and they told me it was out of warranty and it would cost $150.00 for a repair person to just look at it. I decided to just keep using the microwave because I only paid $232.00 for it and I figured after parts and labor if would probably cost over $200.00 to fix it. I called Whirlpool back in June because the microwave wouldnt shut off and even kept running when you opened the door. Whirlpool sent out a repair person at no cost to fix it. But the repair person told me Whirlpool only paid for him to diagnose the problem. I had to pay for the repair. After working on the microwave and replacing sensors and fuses he determined the microwave irreparable. I called Whirlpool back and they just told me that my microwave is 1 1/2 years old and they were not responsible after 1 year and I should have bought the extended warranty. I will never buy another Whirlpool appliance again.

We purchased our home brand new in June 2010 and with it came all Whirlpool appliances. We started having cosmetic problems with our over the counter microwave about 2 years later (model WMH2175XVS-2). The plastic casing around the door handle started to crack on the top and the bottom and now both pieces are completely gone as they fell off. The handle is still attached and the microwave is usable; however, it looks shoddy. To replace it, we were told by a Whirlpool authorized repair person that you would have to replace the whole door at a cost of $300 or more if you include labor. I am disappointed that this happened and that we cant get it repaired. It makes me think again about purchasing more Whirlpool appliances.

GFG461LVT2 - In October of 2010 I purchased a Whirlpool Gold Fridge and Stove. Its been about 3.5 years and two of the caps that go on top of the range burners are chipped. All of the caps are badly stained and despite the manual instructions to wash them in mild soapy water, they do not come clean. They dont come clean using heavy duty Easy Off cleaner. In addition, the seal on the oven door has apparently failed because the glass is foggy on the inside. Today I phoned Whirlpool after going to their website. I first spoke to a parts representative who advised that I would have to pay $47.00 per cap or $115.00 for all five burner caps. I was transferred to another department as I thought I should get the appliance parts and door fixed for free. The appliance is only 3.5 years old. I was told that the appliance is only guaranteed for 1 year and I would have to pay dearly to remedy the two problems. This appliance is Whirlpools Gold series. It supposed to be top-of-the-line - the price tag was certainly top of the line. Im very disappointed in American workmanship and the companys lack of integrity. Not too long ago I purchased a Whirlpool (aka Maytag) front loading washer. I now own a Samsung. The point is that designed obsolescence will force consumers to purchase products made outside of the US because some of us cannot afford to buy or repair appliances, cars, etc., every couple of years.

The freezer has never been able to produce ice cubes, so, took the ice cube maker out, and bought plastic ice cube trays. Not what I paid for, but it’s cheaper than having to buy another fridge.

I purchased a gas range stove about three to four years ago. I am extremely dissatisfied with this Whirlpool stove. This is the second time the electric ignitors have been replaced due to the stove not working and it is still not working right. The gas valve regulator has also been replaced because it went bad too and my oven still isnt working. I have already put around two hundred dollars in and no one has any idea why it isnt working. Apparently these stoves are a real piece of ** and everyone is having the same type of problems. Something should be done for the customers as it is now. I will never buy Whirlpool again. What a piece of garbage!

Purchase 2009 Duet Washer & Dryer (WFW9700VW00). Recently have had error codes coming up - F35 for one. Could not get washer to reset. Had to keep unplugging and plugging back in. Service was called and the tech knew right away what was wrong. He ordered and installed an analog pressure switch. While he was working he mentioned that this was a known error and if we had called with this problem a couple years ago Whirlpool would have replaced the washer. Im not looking for a replacement but I feel Whirlpool should cover the part having been a known issue.

My Whirlpool dishwasher is 11 years old and has performed satisfactorily throughout. The utensil container is in the door, saving room inside but making it a bit less convenient to remove. The results are satisfactory, but I carefully rinse everything before putting it in the dishwasher. I dont believe dishes with hardened food would come out clean without this step.

I first want to begin by saying that we have been a Whirlpool family for years. I now own a Whirlpool microwave, hot water heater, washer/dryer, Jenn-Air stove and dishwasher. My problem now is with the Cabrio Washer purchased in 2008. I started having problems in 2011 and the same problem has raised its ugly head again. When I try to use the Clean cycle, it starts at a 60-minute cycle and goes down to a 2-minute cycle in 3 minutes without cleaning or even running water into the tub. This time, it made a terrible noise and stopped. The tub was replaced in July 2011 after having the same complaint as above. The repairman said that the mechanism on the tub to fit into the spinning cycle is made of plastic and is not holding up. Also, in March 2012, a new control board was installed. I spoke to Whirlpool Customer Service and they informed me that they did not have any other complaints about the Clean cycle and that I should call the repairman. Luckily, I purchased an extended warranty. I vote a thumbs down on the Cabrio washer.

Multiple issues with the Gold Series. Have lost two refrigerators full of food!!! First problem was ice on the back wall of the fridge. 2 years later refrigerator is not blowing cold air and it is only 4 years old!!! Terrible product!!

This washer is going back. It simply will not spin the water out of the clothes. It says it gets clothes drier than a conventional washer, but I have not found that to be true. I have to use the drain/spin cycle over and over and still the clothes are wet. I had the repair crew out and they were able to get it to spin out a very small load consisting of two sheets and two towels. Other than that, it does not spin out water. It is also very difficult to load if you attempt to leave the center open as they recommend. The cycles are very long. Not being able to look inside without pausing it and waiting for it to unlock is also a huge hassle. I am getting one with a glass top so I can see what is going on. If you leave it open for too long, it cancels the cycle and drains all the water, and you have to start over which is another problem because all your detergent just got drained out before the load gets going. It uses so little water on most of the cycles that the clothes get totally tangled up with one another. I think you should be able to choose the water level manually. I am all for saving water but if I want more water from time to time, this does not allow you to do that. I DO NOT RECOMMEND!

For the last month, in order to wash dishes, we have to start the dishwasher normally. The water will begin to fill the tub and then stop and all the display lights go out. We push the cancel/drain button and the dishwasher empties the water in the tub. We again, push the desired wash cycle button just like the first time and the dishes wash normally. We have purchased at least two of this same type dishwasher with the utensil holder in the door from Whirlpool in the past, with great satisfaction.

A top loading washing machine with an agitator in my opinion, gets my clothes 100xs cleaner than one without. Ive owned front loaders and top without agitators. Never again. Top with agitator is my personal preference from now on. Also Whirlpool has never failed me unlike other brands.

Microwave has melted a hole on the inside rectangular plastic cover. Model number is on recall list but not serial number. Opened microwave to find melted plastic on my popcorn bag that was dripping from the plastic up top. I will replace microwave but not with a Whirlpool again.

We purchased the Whirlpool Cabrio washer and dryer duet exclusive to Lowe’s in June 2011. I was immediately dissatisfied and went to Lowe’s. They told me I only had 7 days to return it. They dispatched a service man and he said it was working as it was intended to but I would never be satisfied. If I had dirty clothes from farming, construction, or mining, I should forget about it.” The washer is an eco-friendly model and all the clothes do not get wet. It wrings them out very tight and everything needs to be dried or ironed to get rid of the wrinkles. After 6 visits and lots of stress, I am returning the washer to Lowe’s and they will replace it with a different model. It definitely will not be a Whirlpool. I am very disappointed in the service and response I received from Lowes.

I bought a new home from DR Horton with Whirlpool appliances. All of the kitchen appliances were Whirlpool which came with a 1 year warranty. After closing on the house and getting in, started the dishwasher for the first time, it started leaking water instantly from the bottom of the unit and spilled all over the floor. Tried to contact the builder/inspector who asked us to contact Whirlpool. Called Whirlpool and I was kept on hold for over an hour before someone answered. The rep was so adamant talking all unrelated things and said that she cannot do anything for another 15 days. After escalating to the supervisor, it was the same response. The service at customer care is so bad with no fix in sight. I am not sure what they are going to do with the appliance and not sure whether they come and fix it or keep me waiting. Very unethical, the way they talk to the customers.

I have a 4.5year old Cabrio washer. Ive replaced the water pump 3 times due to a weak plastic part which keeps blowing out due to pressure. Now, the unit is leaking rusty, black fluid from the bottom. I purchased it at HH Gregg in Indianapolis, In. Svs tech called. They have never seen this on such a new unit. Parts and labor will equal $400.00. Calling whirlpool customer care did nothing. I offered to pay the labor of $100, If they would be willing to pay for parts. Talked to a supervisor who offered to sell me an extended warranty costing $300.00. I am a stock owner in Whirlpool, no joy, dissatisfied with faulty product. They are unwilling to make this situation right. The unit is poorly made. I think a $800 unit should last longer than 4-5 years. In 2006, Whirlpool stopped offering a 5 year normal warranty on their units. Supervisor would not let me talk to anyone else.

Easy to operate. Easy clean feature is thorough. Glass top is easy to clean as well. Even temps cook the food well and this oven is reliable. Lots of options of temperature. Glad we chose this brand.

I bought a range on 2/11/11. On 2/14/12, I cleaned the oven for the first time at high temperature and noticed burned grease marks which appeared at the inside of the glass in front of the oven. I called for service and the repairman took apart the door and cleaned it. He said it would probably happen again. There was a leakage somewhere and he couldnt repair it. I think it is a quality control problem at the manufacturing levels.

New range and the faceplate keeps melting. Had it fixed once and it is melting again. I have been trying to contact Whirlpool but to no avail. What is my next step and is anyone else having a problem with this.

My Whirlpool Cabrio washing machine. f1 keeps showing up on washer on. Shuts off again and again.

The silverware comes out all spotty and water stays inside cups and on dishes. I am going to have to replace all my utensils. They are so spotted that they look filthy. Knives, forks, spoons and all serving utensils. I have used this brand new Whirlpool dishwasher from August, 12, 2016 to today Oct. 21, 2016. I am very upset.

The machine starts shaking uncontrollably, has to be paused and clothes redistributed but still shakes. The stabilizers were replaced approximately 1 year ago. This worked until today. I was was washing a small load and distributed the load accordingly. On the spin cycle, the washer again began shaking and I shut it off. I will never buy Whirlpool products again!

Maybe they make some higher end ovens but ours was not one of them. The oven light fixture works intermittently and its only been 8 months that we have had it. The insulation on the oven is lacking as well. You can turn the oven off at 450 and within 15 mins its already below 200.

We purchased our unit (Microwave Hood Combination #WMH53520AH-1) in Fall of 2013 and within a year we noticed there were occasionally problems with the sensors; occasionally when you would open the door the lights would flicker and even rarer still, they wouldnt turn on at all. Id close and re-open the door several times to try to get it to register, because if it doesnt you are unable to heat anything in it. The sensor issue increased with the passage of time, but because it was outside of the 1 year warranty, Whirlpool refused to do anything about it, instead advising that I pay $70-140 for a service professional to come out and inspect it. The biggest problem with the sensor issue in this unit is that normally, if you open the door mid-heating cycle, the microwave will automatically turn off but once I opened the door AND IT CONTINUED TO EMIT MICROWAVES - the cycle stayed on!!!Needless to say, on the occasion that the microwave is actually working and we are heating something up in it, we NEVER open the door mid cycle and instead hit the cancel button, which blessedly works. You would think Whirlpool would care about their reputation for making high-quality electrical products. A flaw in the construction or design of a product can appear if quality of materials is poor and the problem can be exacerbated over time. Which is why I assume the warranty is only for one year. High Quality Products and Good Customer Service are such rare things these days. For our next microwave (which I imagine well need soon) I think well forego Whirlpool and go with a different company.

Ice machine went out right after the year warranty was up. Convenient right? We called a hometown tech to come out and look at the water valve. He was unable to locate it, so we called Whirlpool service. After waiting 30 mins, they told us they cant tell us where to locate it for safety reasons, and if we wanted anything done to the refrigerator, we needed to pay a tech to come see it. EXTREMELY RUDE!!! I would NOT recommend whirlpool ANYTHING.

12 months and 2 weeks, my ice maker quit working. I called Lowes where I purchased this top of the line junk. The first thing they asked was do I purchase the extended warranty. I said no. He advised to call a repairman he recommended, but I would have to pay for the repairs. Whirlpool was just as bad; no warranty, you pay. It appears they are both relying on warranties rather than selling dependable products or customer satisfaction. A couple months later, ice forming on the bottom of the freezer, and puddles every couple of days in front of the refrigerator. I pulled the two draws out and removed the ice. Within a week, it was back. A $2400 refrigerator should last longer then a 1 1/2 years without falling apart. My Whirlpool dishwashers only lasted 1 1/2 years also.

We bought a Whirlpool Cabrio washing machine a year and a half ago. It started making loud noises over time and finally stopped. Whirlpool did advise us that it was out of warranty but suggested they send a factory repairperson out. They told us depending on the problem they might pay the bill. It turned out that a nut holding the pulley had not been tightened up properly at the factory and had no restraining device, so it simply rattled off over time. Since we dont use the machine that much, the problem went past the 1-year warranty. It cost us two hundred and fourteen dollars for repairs. I could have put the nut back on myself for free. The service guy also said they had multiple similar problems and I should contact Whirlpool and they would probably work with me. No chance. They only kept repeating that it was out of warranty. I even talked with a supervisor who said the same thing. I asked to appeal further and she refused to give me anyone else I could contact. I asked for their legal department information, and she said she did not have that and I would have to get that through my attorney. What a joke. No more Whirlpool for me.

Absolute junk. Bought an entire matching set 2 years ago. Fridge, microwave, dishwasher and oven. Oven is the most user unfriendly thing I have ever bought. That’s my fault. Microwave failed. 300 to replace. Ice maker in side by side fridge failed, another 300 dollar fix. I used to have a field mouse or two get into the house every year. Don’t have that problem anymore because the fridge is so loud it scares them off. Talking to Customer service was the most frustrating thing of all. They think if they say your name in a nice soft tone long enough it will make everything ok. Mother and father raved about Whirlpool products. How times have changed. Do yourself a favor and steer clear of these products. Also, look up the other brand names made in the same factory and steer clear of those as well. I used to think appliances were all the same. How wrong I was. Do your research. It will save you a bundle in the long run.

We have had this microwave 3 years. The first thing we noticed was that baked potatoes were way overdone and nothing heated up correctly when using the sensor Not a big deal - just stopped using the sensor button. Now, we keep getting the open/close door message keeps coming up. I have done all the recommended fixes with no luck. Now we need to have a repairman come out to fix it. It seems when you are paying over $300.00 for a microwave, it should last longer. If I had known it would be such a poor quality, I would have bought a less expensive one and definitely a different brand. We do not use a microwave on a daily basis, so it certainly did not crap out from overuse. I would not recommend this to anyone. Save your money or you will be spending much more on repairs.

We are having our second major issue with our Whirlpool Refrigerator Model WRF757SDEM but unfortunately at 1-1/2 years old, it is out of warranty. Although the certified repairman says that the issue with the thermostat is a known issue and the company created a whole new part to fix the problem, there is no recall. Customer service was lousy. They deny any know issue (again, they created a new part they will sell us to fix the issue) and they mocked us for not buying their warranty after having the first problems with their fridge. This new problem will cost over $300 to fix. Why is there no recall if they knew about the issue?

Bought brand new stove, had issues from day 1, called them after TWO different repair companies came looked at it and said it was a melon, Whirlpool wanted to send a third repair company. Started dealing with this in September, its now end of December and Im still waiting for replacement stove.

Our just over 1 year old Whirlpool washer died completely last month (mid May). After calling them and being directed to the extended warranty dept (which we ended up purchasing), a repair guy came out and told us it was our main controller board. Three days later, he returned with the board and nothing. We were then told it was the user interface. They were on backorder until June 5, which means our machine would be out of commission for three weeks. I just received another call informing us the part was now on backorder until June 15. Whirlpool, on what planet is it acceptable for your appliances to be out of commission for six full weeks? Never again.

I purchased this machine in February 2019. The standard one-year warranty covered the first service call less than one year later. This call was related to the main control board. If this part goes out it will prevent the washer from advancing through the cycles. A technician was able correct this problem by resetting control board. That was sometime the first year. The next call was for the same problem and it cost me $90 to have a technician reset the board again. I then learned how to do it myself through online research. However, I had to do it more regularly and this got old as you can imagine. I did buy myself about two months of time by purchasing a used part but it soon failed as well. This main control board cost $564 if you get it from the manufacturer. This exceeds the cost of the machine. It was purchased in 2019. (The same machine has gone up to $740 today.) I had no other problems with that appliance however, it appears nowadays with electronics taking over cycles vs. mechanical parts you will not enjoy the same longevity as I did when I got 16 years out of a GE washer before this one. I have replaced this machine with a competitors product that costs less than the part except for the 5-year warranty from Lowes.

I am very impressed with Whirlpool. After seeing my review, they contacted me and offered to send the parts to fix the problem with the LED lights. They sent a Whirlpool authorized repairman to my home with the understanding that since the refrigerator is out of warranty, I would have to pay him. Whirlpool also asked me to return the faulty part so they can research the problem. We are once again happy owners of Whirlpool products. Thank you Whirlpool!

Does clean well but I notice that even on heat drying there is still water on the inside of the door when I open it. I have loaded it up and even the glass baking pans came out sparkling. I would recommend this middle of the road priced dishwasher.

Such an expensive refrigerator but poor quality. Bought at Home Depot back in November of 2019. The bottom Freezer freezes up messing up everything only three months after purchase. I wouldn’t recommend it at all to anyone.

Moved to new house with new Whirlpool appliances, including oven, in August, 2015. I did not cook in oven at all until Thanksgiving meal. Had something spill over in oven. Spillover caught fire. Oven at 350 degrees. Complained to Whirlpool. A supervisor told me that it is normal for spillover to catch fire. They sent out a tech to check oven, and said I would be responsible for paying tech. The tech explained that unlike conventional ovens, this oven has heating elements outside of oven, so to get to the temperature of 350 degrees, the heat at the bottom of oven can get to over 550 degrees. He could not get Whirlpool to replace oven. I didnt have to pay, but now I am afraid to use it. Some of the finish on the inside of the oven was burned away, so it is not like I can trade it in. I feel the oven has a defective design if spillovers are supposed to catch fire while you are cooking, and the finish gets damaged. I will never buy another Whirlpool appliance again, if I can help it.

Whirlpool Gold (Model No. GX5FHDXVY04), expensive French-Door style refrigerator , with bottom freezer pull-out drawer, purchased in 2010, has drain line that repeatedly blocks, causing frozen sheet of water on bottom of freezer and consequent leaking of water onto wood flooring (ruining said flooring). To add insult to injury, 5-year extended repair warranty I purchased specifically EXCLUDES drain lines, leading me to believe that this is a well-known problem that is costly to repair which is true because the drain line and pan on this particular model is nigh impossible to access without upending the unit (two people required) and accessing the bottom panel of the unit. This appears to me to be a design defect that Whirlpool should correct -- at its expense, not mine. I am currently reviewing possible courses of action, to include, but not limited to, BBB complaint and litigation.

Phone calls took too long (30-45 mins each). Connection was bad. WHIRLPOOL APPLIANCES ARE **. Whirlpool appliance was poor quality, broke down and not fixable. Unable to find replacement dryer ANYWHERE that will match my existing washer stacking kit. The loyalty program discount is a joke.

My very expensive Whirlpool refrigerator thats three and a half years old broke down before Thanksgiving 2020. I am not able to get parts until after May 18th 2021. After calling numerous times and spending lots of time on hold I was told February 11th by Whirlpool that they had the parts in stock and they gave me a price for each part. Then they connected me to the parts department where they told me they dont have two of the 4 parts that I need. The price that they gave me for the same parts with a lot higher than what they told me at whirlpool. Whirlpool customer service was terrible its as if they dont give a damn. They just dont care.I cant believe its going to be 7 to 8 months to get parts for a three and a half year old refrigerator. I have fallen down my basement steps where I have a small very very old refrigerator twice carrying food up and down. Spreading mustard and sour cream all over my carpet my stairs my walls. Not to mention the fact that I have bruises all over my body. If I were you I would not buy a whirlpool. Its going to cost over $600 for the parts replacements that is if I can ever get them. Im going to have to break down and buy another refrigerator. Remember Whirlpool customer service is terrible and you can just forget about getting the parts.

I’m disappointed in this dishwasher, it’s not yet a year old, and it doesn’t clean the dishes, and it also does not dry them. I now wash and dry my dishes by hand, the machine stays soaking wet even two weeks after running it.

The oven has not worked correctly from day one. I have to use a thermometer plus after the correct temp is indicated I still have to wait another 15 minutes for the oven to reach the desired temp. Also have to set the temp for 25 degrees higher than the one I want. The burner that supposedly has two sizes in one is basically useless. Temps are not correct and sizes are misleading. There is a tiny groove around the outside edge of the stove top that gathers crumbs which are hard to clean out.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

It was a complete nightmare buying our all side by side stainless steel freezer and refrigerator. Freezer still working fine but the refrigerator started blowing hot air, all the food spoiled within 2 days as we were trying to figure out what was wrong. The store did the best to correct the problem and it seemed the Whirlpool company had no faith in their product as over the phone recommended having extended warranty. So sorry we bought this product, nothing but hassle!!!

We purchased a Whirlpool Gold Dishwasher about 8 months ago. Immediately called for service as dishes did not clean after running over 3 hrs. Was told it is operating as designed. I followed all the tips and it still continues to not clean. Plastic wear and cups stay wet, plates arent clean. We have changed detergents pods as well. We may junk it and buy something else. Recently purchased clothes washer and did not buy Whirlpool. Very, very disappointed. I should have kept my 12 yr. old GE Dishwasher that wasted water... But cleaned my dishes. Not happy with Whirlpool!

I lodged a complaint of Microwave problem on 05/11/2011, and up to this date (18/11/2011), I am still waiting for the problem to be solved. I have a 1 year old baby. We cook food for him in it. Due to the microwave not working, he is suffering.

Our refrigerator had ice maker problems from the beginning. After 6-7 trips (with a warranty extension) they got it fixed. Then randomly the ice melted, made a puddle in fridge and on the floor, the freezer thawed. Then it would begin running after several days. Finally Whirlpool recommended we replace the computer brain for $1000 PLUS. The refrigerator is 4 years old. We are having a Bosch delivered today, even though the ice and freezer turned back on after being off for 3 days. Customer satisfaction stinks.

I purchased 3 appliances (microwave, stove, and dishwasher) on 10/22/10 when they were on sale at Sears for my soon to be remodeled kitchen. I did not have them delivered until 11/15/10 until contractor was getting ready for them. They still were not installed immediately. On 11/17/11, in the evening, the microwave stopped working. I called Whirlpool on 11/18/11 for service. Whirlpool will not honor the 1-year warranty since technically I bought them in October 2010 but did not even have them installed in my home for use until the end of November or beginning of December 2010. Common sense tells me the company should honor the warranty. Are products being made today to last less than a year before they go bad? To pay for a service call and parts, I can buy a new microwave (but you can bet it wont be Whirlpool).

We Purchased our KitchenAid refrigerator from Home Depot. After 1 week we had issues with the ice maker, water dispenser and lights going on and off randomly. Technician comes 5 days later, he half way fixes it and discovers we need to order a part. The part took over a week to get and by the time he shows up to fix the refrigerator, it has now been TWO WEEKS with out our $4,000 refrigerator not working properly. Well, after trying to replace the part and spending 45 minutes on the phone with some engineer, it still wasn’t fixed. He Says to us “hey good news youre getting a new refrigerator”. Good news my **. It’s now been THREE weeks and it turns out the new one isn’t coming for another week. Customer serves reps. are really good at apologizing for the inconvenience but Whirlpool has Done NOTHING to composite us. DO NOT BUY WHIRLPOOL.

I bought a Whirlpool Partner II 5 and a half years ago. It was always noisy and took very long to run a cycle. It started to malfunction after 2 years. We bought a new computer for it and a new control panel for the touch keys. It still kept not running a cycle fully. We found a YOUTUBE video that showed how to reset the model by pressing a combination of Normal and Heated Dry and that seemed to fix it for 2 years.It has stopped working again. Now it seems that the heating element is out. It doesnt clean at all, a scum film has covered the inside of the dishwasher and even mold spots are appearing. Ive had to wait extremely long times on hold to talk with an agent. My option is to hire a repair tech to come out and repair it and I pay for the parts. Seems like a bad deal since Ive already spent over a hundred on repairing it and a lot of hours. I will never buy a Whirlpool brand appliance again.

I bought on 14/4/12 a Model-205 Orchid Wine refrigerator. The defrost knob was replaced by service last month, as it was not working. For the past four days, there are lots of water formation on the freezer door and vegetables are getting spoiled due to water formation. I request them to replace the refrigerator.

My ref. stopped working. I troubleshoot it and did not work. I filled out a service request back on February 2nd, 2015. I got an email back from a subcontractor called Active Appliance INC. with a date service on February 6th, 2015, 4 days after my service request, and that is the only available date. The technician arrived while I am not at the house, however I talked to him before he started the work on my refrigerator and asked him kindly if he can call me after founding the issue, and he assured me that he will. No call and when I arrived home I found that he told the attendant that the refrigerator is not working and he has to report to the office. REALLY! We know that! Anyway I called Active Appliance and the customer services rep. told me that she could not answer with the diagnose until she speak with the technician and that will be Monday February 9th, I asked if I could speak with a manager, and her reply was Our managers do not talk to the customers. I had to hang up and call Whirlpool customer services and spoke with a nice gentleman, that he was not happy with Active Appliance INC. services. He placed me on hold and called them and within 3 minute he got back with the news, what was wrong with the refrigerator, electric computer panel burned out and then the fan continue to work with no stop, so it burned as well. He assured me that the services will be done no later than Tuesday February, 10th.While on the phone I got a call from active appliance and this time she wanted to know if I am warranted. I told her that I have Whirlpool on the other line and they assured me that I am. She said that it does not matter and she has to get something in writing. I placed her on hold and talked with Whirlpool and he assured me that he will contact them and email me a confirmation, which he did. By Tuesday February 10th, no call no follow up. I called Active appliance and they stated that it would take up to 14 working days for a part to arrive. I called Whirlpool and spoke with a customer services manager, and she got on the phone and told me that they are going to do their best and get back with me. Today February 16th I got a call to cancel a work service order due to technician calling sick and reschedule for February 25th Wednesday, I told her that they did not call to schedule the service first place, her answer was Never mind, I am calling to cancel anyway. Would you like to take this appointment or NOT? I asked her kindly to reevaluate their service procedures and the way they handle their customer, and I told her that I bought my refrigerator from Whirlpool and they are the company in charge of their product and I do not wish to continue this dialog with Active Appliance!I called Whirlpool and the customer service gentleman was helping me and we got disconnected, however when I called back they were closed for the day, however the customer service has my phone number but I got no phone call!!!! I think this is the worst POOR service I got within the last 20 years!!!!! I hope someone at Whirlpool care about their services and can contact me to handle the issue.

I bought my fridge in late 2008 and I am already experiencing potentially expensive repairs due to what I believe is a defective design system, of which, consumers are having to bare the consequences for those who collected our hard-earned cash and delivered a lousy product! I saw so many similar complaints about the ice system on this fridge that I am almost positive that it qualifies for a class action suit and settlement. How about a collaborative approach to this since we have all suffered needlessly? Tell me what you think and if you are in on it.

The plastic frames for the glass shelves are cracking at the corners and the only option Whirlpool has given me is to replace the shelves at about $150 each. Needless to say, the cracks started just after the 1-year warranty expired. If only one shelf was cracking, it could be my fault; but since all are cracking (some on the front, some on the back and some in multiple places), I believe this is a design flaw and should be covered by the manufacturer. When I call, I can only get through to someone to schedule maintenance or order parts. What can I do?

We purchased our basic Whirlpool refrigerator model # WRT318FZDM05 from Lowes on September 13, 2019. We bought one of the more basic models available because we have owned higher end fancier refrigerators which have had multiple problems and not worked. So this is the 18.2 cubic feet top freezer model. About six weeks after owning it (conveniently just past the 30 day return window at Lowes!) we began to notice that our freezer wasnt freezing properly or making enough ice. There is only one control panel in this basic fridge so we turned it up. While this cranked up the freezer, the refrigerator compartment began to freeze its contents. So we had to choose between soft serve ice cream and refrigerated eggs and milk or hard serve ice cream and frozen eggs and milk! Finally after the holidays the certified Whirlpool appliance technician came out and recommended a repair with replacement of start device and control board. His report: Freezer not freezing, found the compressor turning on and off. The refrigerator was not even 4 months off the floor and the problem began when it was only 2 months old! When you call the Whirlpool number heres what they say: Welcome to the Whirlpool customer exp. For over a century weve believed in everyday care. Lets see how we can care for you today.Well, when someone calls with a very recently purchased refrigerator whose START DEVICE and CONTROL BOARD no longer work properly that person should be able to return the defective appliance and get a new one. Nope. Not with the Whirlpool experience. You are told that youll have to wait and see if those devices which are ten days away from being replaced in your new refrigerator will fix the problem. So basically NO do not buy from Whirlpool. Turns out a century of everyday care (??) hasnt taught them much about how in this century people need a refrigerator that works everyday!!!!

Do not ever buy a Whirlpool refrigerator. Sloppy construction, bins dont close, doors dont seal well and a brand new fridge doesnt cool to a safe food zone. When we call for service, I got the run around for almost 2 hours. They wont be sending anyone to service a brand new unit for an entire week... And thats 2 days before Thanksgiving! I have never had an appliance made this poorly. We dont have the space for a bigger unit, so thats why we bought this model. Size shouldnt impact quality!

we bought a hotwater heater and it gets scalding hot set on the low setting, we had the gas valve replaced by a@e paid for by whirlpool. It still gets above 125 degrees,set on vacation with me using it all during the day.I have contacted them several times, they told me to let the hotwater run about 10 minutes everyday, or just turn the heater off and let it cool off. I bought a water heater to use not light the pilot everytime I need hot water.

From the very beginning the washing machine did not clean the load. It doesnt even get the load completely wet. The best you can hope for is to utilize lots of fabric softeners to at the least make your clothes smell clean because they surely wont be. Dont even get me started on the load lock feature because it serves no purpose other than to drive you batty. When your 15 year old son offers to give you money to buy a new washer after owning the one you just bought there is nothing I could say more profound than that. How Whirlpool stays in business befuddles the mind.

Will never buy another Whirlpool/GE product again. Nothing but problems. Paid $1700 for a Whirlpool/goldstar refrigerator 2 years ago. Problems from the start with slide-out shelf cracking, evaporator fan burnt out within 2 years, digital display cannot read anymore. Now have another problem again - not cooling. Going to the trash. No wonder your stock price have dropped. I would sell off to. Whirlpool/GE have been going down hill for the last 5 years. Maybe more. Cheap products, do reflect, it just a matter of time, I would think you would address these issues in your product line, but it shows your company is all about profits instead of quality of products. Keep going like you are, and you will be bankrupt. Cheap overpriced and nothing but junk in any products you manufacture.

I have been buying refurbished appliances and this one we bought it brand new. Its a great buy and it will last a while. It does a good job washing and the clothes come clean and almost dry to the touch.

The only thing cheaply made is the push latch on the dryer. Both are pricey for what you get, I thought, though they were the cheapest Lowes offered. We have had the pair for a little over a year. So far no real problems, though we really do not like the latch door. You have to slam the door to get it to close. To do it over we would probably have shopped a little longer and for the same money got a better deal.