High end Whirlpool dual front loader washing machine model number WFW94HEXW2 died after 5+ years of less than moderate use. Used no more than once a week. Paid for a top end model. Had 2 mechanics look at it. Mechanically it is fine. The CCU is not working correctly and wont allow it to start. We replaced it, but to no avail. It is barely out of warranty at 5+ years old. Called Whirlpool and they said they would do nothing. Asked for a manager and she was rude to add insult to injury. Cant get to the serial number because the door is locked shut as part of the shutdown problem. Cant find original receipt so including a picture of the credit card purchase. Trying to contact retailer but so far have not heard back from them.

Whirlpool Gold Fridge - For all the people who have water collecting at the bottom of their freezer... There is a plug in the drain pan underneath that needs to be removed. It comes that way from the factory. Thank God, I have a smart Hubby and Father-in-Law. I find it INSANE that these Repair people have not caught on or do they just want to keep billing for Service Calls.

I bought a Whirlpool water heater in March, 2008. Last time (not sure if its last year or 2 years ago), I had an issue of the water not heating. They have someone came in to replace a part. Recently a humming sound (scary one) keeps on coming on from time to time. It took me some days to find where the sound is coming from, and there it is, my fairly new whirlpool water heater.They said it has something to do with the orifice. Since I am not a handyman, they recommended a service guy to come in, and I have to pay. I wonder how much more I have to spend on this heater? Yes Im saving gas consumption, but it will be spent for service anyway, and I have the added bonus of frustration. It is not worthy having it. I spent $1,400 for the heater and labor.

The electric Whirlpool double oven range seemed like a good choice for a single person. I bought it in 2016 around the same time I had some personal setbacks. After finding my emotional equilibrium I decided to return to my much loved baking. While I have no other complaints on this range the ovens are a problem for baking. The digital oven temperature readout doesnt reflect temperature fluctuations in the ovens. Once you enter your desired baking temp the readout never changes even after you open and close the oven door say to take out cookies. Given some of my poor results I suspect even when Im not opening and closing the oven door the temperature is not maintained. I was going to get an oven thermometer but the user manual says it wont reflect an accurate temperature due to way the elements cycle to provide a consistent temperature. Ha! If you want to bake this is not the range for you. My inconsistent results and too often wasted ingredients frustrate me no end.

First twice the frame that holds the crisper drawers broken. We bought parts and fixed worked for only short time. Second we bought extended warranty from Home Depot for 5 years. At about 4.5 years ice maker started freezing up. The valve that controls the amt of water that goes in was broken. Had it fixed under warranty. Started having a little problem with it in a couple months. Lasted 8 months. Broke again. Froze up. Had to pound on ice maker compartment door to get open. Once again water overflowed. Froze everything up. Called. Of course our of warranty now expired. Called the guy that put the ice maker repair parts in. The part under warranty but now I have to pay for labor and them coming out to look at it. Now why would I want to put another defective ice maker in. I called Whirlpool. They didn’t care. We have many Maytag appliances in our home but they will be the last. The appliances they make now are cheaply made.

I will make this short. If there was a part that could break on my Whirlpool fridge, it broke. Whirlpools 3rd party repair company (Flamingo Appliance Services, who are awful themselves) was at my home countless times. This last time, they were replacing the same malfunctioning part for the THIRD TIME. The Flamingo technician (Nicholas) insured me that the issues were not related, despite the same exact part being replaced 3 times. I told him that I believed that was a dishonest statement, and he left the fridge un-repaired. Now Whirlpool nor Flamingo will help, and I am stuck with a non-functional fridge, and small children at home. Whirlpool and Flamingo represent everything I despise, have zero integrity, and are a reading on the barometer of where our country is headed.

The washer buttons stopped responding after 19 months. Lid lock sensor didn’t work. Replaced control board because new sensor did not fix it. Went bad again after a week. I have to replace it. I think 1 year warranties are not enough for a major appliance.

I had to re-arrange my kitchen and have my slider doors moved over a foot to accommodate this monstrosity. After about 2 years the icemaker and water dispenser died - had to shove a facecloth in it to keep it from making noise. The white color is very hard to keep clean. Overall, I would not recommend a Whirlpool brand refrigerator.

After reading all of these reviews, Im not surprised at the negative comments. My husband and I owned a Whirlpool washer and dryer for 25 years prior to them both dying the same summer four years ago. I absolutely would not purchase anything but another set of Whirlpool washer and dryer because of the longevity of our previous set.We bought the Cabrio set 4 years ago this summer. After two years, we discovered it had a slow leak at the back hot water valve and underneath it somewhere when it spun and it had slowly leaked under the wall into our living room which eventually caused our hardwood floors to buckle. We had to replace the flooring in that section at a cost I will not even say and had a repairman come out and fix the lid lock, leak where for some reason there wasnt a washer in the valve area, underneath and the problem with the spin cycle. This was at a cost of around $200.00. Of course our one year warranty had run out. The next year it did the SAME THING AGAIN!!! Although we caught it quicker, we STILL had to replace a small section of hardwood flooring and have the machine repaired yet again at the tune of approximately $200.00. Now, as I type, our machine has yet again flooded our laundry room one year later and I will have to call a repairman in the morning yet again! Its becoming an annual and costly thing!!!I came across this site while looking to see if by chance this machine had been recalled and we would be able to get another one at no cost since we have already paid a fortune for the errors it has caused. I will be reporting to the Better Business Bureau and writing YET ANOTHER letter to the Whirlpool company with the hopes that they will recall this machine!! If enough people protest and report this shoddy workmanship, maybe they will!!!

Bought a side-by-side with extended warranty model ED5VHEXVB01. I had a problem with the ice door. They came out, said they saw a bug, left no comments made, received no word from company. Finally, I called them to be informed on the bug problem. They canceled my warranty with no refund given. Now this will be the 3rd time I have to buy. The starter/overload relay fridge is only 4 years old (out of my pocket). I was told by a parts company this problem the company knows about and will not resolve. My advice is RUN, DONT WALK, away from ALL Whirlpool appliances.

I have had a $3000 GE Profile fridge for 6 years. It died. Tech says turf it. I bought a whirlpool. Hopefully it lasts longer. These expensive fridges seem to be very undependable. What is a family supposed to do when a refrigerator stops working and repairs take days or weeks? Is there a courtesy fridge for a loaner? They are big and heavy. What a royal pain.

Bought microwave two years ago, almost immediately when stove area got warm, the microwave would not work properly. It would beep, the info keypad would cycle, then freeze up. After unplugging and letting it sit for a while, it would work fine for a time. Now it doesnt work properly at all. We keep it unplugged until we need it then it may or may not work. I have had a service company look at it and the only thing they could figure was that was an electronic failure from the heat. I am concerned that it is a fire hazard and leave it unplugged. Not what I expected from a $1000 appliance. I wish there was a class action suit that I could join.

We got what was a top-of-the-line Whirlpool Refrigerator about 10 years ago. It is still running, BUT all of the drawers have broken at least once and the door shelves no longer work. The replacement cost for each item is ridiculous especially considering how flimsy the items are. We decided to look at Whirlpool Refrigerators since the one we have is still running. They have changed absolutely nothing in the drawer or door design. It is all still very flimsy especially compared to the competition. I would strongly advise anyone looking for a fridge to look elsewhere, since, obviously, the quality of the interior is not a priority at Whirlpool. Avoid Whirlpool Refrigerators. The drawers and drawer shelves will ALL break since they have put no effort into fixing obvious defects.

I purchased a Whirlpool washer and dryer from Best Buy. I purchased one on sale that was a great value. The delivery and set-up went well. However, the model I have had a loud vibrate. The drum in the washing machine would wobble and shake across the floor. I finally had to return it and replaced with same model. I experienced the same issue after 30 days. I didnt take the insurance out and I regret that move.

Favorite feature is the double oven. Both ovens are separate self cleaning. Top oven smaller, perfect for a pizza, cookies, small stuff. Great features for entertains, multiple foods can bake at same time. Ceramic top easy to clean, boil overs cannot seep under anything. I have had this oven for over 10 yrs, minimal repairs.

I have a gas range Model WFG540HOESO Airlift self clean. When anyone reaches across or leans against the range, ever so slightly, the knobs turn and gas is released. It is EXTREMELY dangerous. The Airlift self clean has never worked. When the repairman contacted the technicians at Whirlpool, they told him that there was nothing they could do. In other words, I am stuck with an oven that will not self clean. The water in the bottom does not even come to a boil.

My fridge is over 10 years old and the compressor has not failed. I have replaced some of the bins that have cracked or been broken over the years. It is a side by side in black color and will probably replace it with another type but the same brand as long as it is economically feasible to do so.

3/16/2019 washed a load of bed sheets, on the white clothes cycle, put the wash in at 9:21am. Left the house at 12:41pm. Wash still not finished! It was finished by the time I arrived back home, I was gone about 11/2 hrs. I have yet to complete a wash cycle in less than 1hr 15mins. I hate that I have no control over water level, that I have to put detergent in the bottom of the tub, and the damn lid locks! My clothes dont feel clean. Why does big brother get to decide how my wash should be done, when they dont pay my water or electric bills?

Cabrio Whirlpool washer - I hate this washer. Had it for about 3 years now and it will not spin out and does not give a code. Called a service tech out and they cannot find anything wrong with it. The water goes out but will not spin. It sits on 20 minutes and does nothing. Will not buy another Whirlpool washer. Wanted a good washer and got a piece of junk. Will not recommend it to anyone else. Think Im going back to the old style.

Cabrio (h2low system) top load washer ..USA 120 volt - A true piece of crap... Bought 2010... Even when it does work, 5% of any load will NOT spin out... The damn thing will refill its tub with rinse water to redistribute load so as to get a spin out. SOMETIME month ago, thing just dies... nothing. Technician comes out for two hours its the shift sensor. Replace for 200+ bucks... done. Works for three weeks, dies, tech is back. 4 hrs... its a bad processor board. Ordered 140$ rebuild, comes in mail few days later. Tech is back, replaces board. We have smoke!! Looks like a bad motor part. I could go on... but why. Never ever buy one of these sorry pieces of dreck. Absolutely the worst. Poor quality even when it works. Horrible wash quality. Never again Cabrio. Remember it.

We purchased a brand new Whirlpool water heater from Lowe’s two years ago. The water heater is not heating properly, and I contacted customer service to inquire about their great warranty. I was very disappointed with their poor customer service, but above all, their warranty. They emailed instructions to run a test, which did not resolve my issue since I still run out of hot water halfway through my shower. Mind you, its only one person in the house for a 40-gallon Whirlpool water heater. I have replaced the heating elements and thermostat, and it is still not heating. I contacted Whirlpool customer service, and they are refusing to replace it, stating that the water heater is working. I will never buy any Whirlpool appliances again. They do not back up their products, and their customer service is worthless. My recommendation is not to buy Whirlpool products.

We have owned our refrigerator approximately 7 years. We have replaced this fan 3 times and now it went out again. The store we purchased it is now out of business. I am so flustered I do not know if we should replace it again or buy a new refrigerator, I can guarantee we will not be buying another Whirlpool. Their part runs about $50 but how do we know that is not going to go out again?

1st range arrived in June and would not heat to temperature. Sensor and control panel replaced. After 3 techs Whirlpool agreed to replace in September. 6 weeks later new range arrives. Protective film stuck to the lettering and when you try to remove it the lettering comes off. Chunk of enamel missing off inside oven door and defect in the glass cook top. Fast forward to today. THIRD range delivered. Same issue with the protective film and gouge in chalking around cooktop. Leons has been fantastic. They are replacing it with an entire new brand!

The broiler came on its own during the night. We went to bed at midnight. 4:30 in the morning woke up to a smell, the broiler was going wide open. It had melted the handle off the front of the drawer. There are cookie sheets in the broiler. We dont use it, we have never used it, it was so hot Teflon on the cookie sheets burnt off. The side of the stove was so hot I couldnt touch it to get behind to turn off the gas. It almost burnt my house down. The carpet and the wall are black in the back.

Purchased this set in January of this year 2016. The loudness of this machine struck me first along with the constant banging of the pipes in the basement when filling with warm water. The agitator is very loud. Thought I was trading up from a 10 year old Whirlpool front loader set. There is hardly any water in the washer when running a full load. I take clothes out that are not only a twisted tight mess but in some spots are not even wet!!! The dark clothes inevitably need to be rewashed because there is white residue on them!!! I have used the pods and liquid and it doesnt seem to matter, happens with both. Customer service has no answers and say theyve never heard this before.How can this washer wash clothes when there is no water and little if any movement of clothes??? And how is it that we are all saying the same exact things and Whirlpool is not being held accountable??? I DONATED my working fine set to a dog rescue and am now stuck with a brand new machine that works PERFECTLY HORRIBLY. So who is watching you Whirlpool???

I purchased a Top load Whirlpool washing machine, replacing my old Whirlpool. I am so unhappy with this new one. I noticed that the water level are low...I had the tech here twice and they said that if here isnt any lights on the dash that the machine is working. I called the head tech, same answer. When I put the clothes in the washer I make sure that the clothes are evenly placed in the tub. The clothes comes out tangled and some not clean. Tonight I noticed that a pair of pant at the bottom of the load had white smudges/ I am so unhappy with this piece of junk/ I cant afford to buy another washer, so I am stuck with this.. I have tried all the different controls, still bad. I know the new machine are different than the old ones. I still believe that the water levels controls are not working. I have used my sister new washers and the clothes are not tangled and they are all clean.

Whirlpool Washing Machine Model WTW4950XW0 - This washing machine was purchased as a gift by my father. We have owned this machine for about 2 years. I am very disappointed with the quality of this machine. I have 3 children and several pets. I use my machine a lot and need a quality item that will last. This machine is not that item. Within a few months, the machine was off balance and bolts had to be tightened. We have had problems with the belt, bolts coming loose and the machine not draining.More recently, the machine has become very loud... For approximately the last 6 months. My husband has taken the machine apart and looked for anything to be wrong with it and has found nothing. Now the machine is not running. I will turn it on and it fills with water and then stops. I will clear it out and restart it and it does the same thing. Another issue has been with spinning and draining. The clothes are soaking wet even after the drain/spin cycle.I have researched what could possibly be wrong with this machine and have found a vast number of items that could need replaced. With the money I have already put into fixing this machine in the past and the amount it will cost to fix it this time, I believe I will be further ahead if I buy a new machine made by a different company. I will not be buying a Whirlpool product again.

I bought a semi automatic washing machine from Croma Store (Gurgaon) on 03/09/12 Model no A-72H* and I regret to say that the water direction changing knob (to change water flow from agitator to dryer), has broken. The machine is not even 4 months old and the water inlet is broken. How can this happen in a brand new washing machine? You claim to have durable home appliances products and your machine does not last 6 months? Can you see that the broken piece is attended to or replaced at the earliest?

I bought a Whirlpool refrigerator from Home Depot. It didn work. I had to wait for a week to get a new fridge.. I also bought the 5 year warranty -- its not worth the ink its written with. MAYTAG DOES NOT ANY CUSTOMER SERVICE. THEY DONT KNOW A THING ABOUT CUSTOMER SERVICE.

I bought a Maytag front load washer on October 24, 2010. I have not been able to use it because it came damaged by the manufacturers. I contacted them by phone several times and it took them three months to send someone (A and E sears repair). Two months passed and I did not get the parts necessary or a replacement washer. I kept calling and finally they sent someone again in May 2011. They said they where going to order the parts because the new company was not going to replace the machine, even though it was already damaged. They said I would get the parts between three-five business days. I only got one part. A and E sent a repair guy again on the 22nd of June. This one said they needed the entire machine in parts and that he would order the parts. I called A and E one week later and they said they were waiting for the on manufacturer to send the parts (Whirlpool). The 26th and the 27th of July, I got the parts. On the 22nd of July, another repairman came and said we needed more parts. Today, August 16, 2011, I called Whirlpool and A and E and now they said the parts wont be here till after October 26, which by then I would have to pay for the parts and labor if I wanted it fixed because by then the one-year warranty would have expired. So here I am with a $700 washer, which was never used and they refused to fix/replace. They sold me a lemon!

It is my belief that through my experience that most Gas Range manufacturers mainly Whirlpool corporation purposely designs the stove igniter part to fail in 5-10 years. They do this in hope the consumer will purchase a new stove. The igniter in my stove has failed 6 times since I purchased it in 2005. I have had to replace it at my expense each time. The last time it failed, I asked Whirlpool if they would do a good faith gesture and replace it. They very rudely refused. I will never purchase another Whirlpool appliance again and encourage others to follow me. If they give me this much grief over a simple good faith gesture, I can only imagine the difficulties in getting them to honor a warranty claim!

I bought a whirlpool microwave on August 8th. The microwave was missing parts. I called whirlpool. They said they were sending me the parts, mind you this was not a floor model. So 2 weeks later pass I received no bracket No screws. I called whirlpool oh yes we got the address wrong. Resent it, just one screw no bracket and I needed 2 screws. I called again oh yes we did get the order for the bracket too but you have to pay $7. I said ok no problem. Can you do fast shipping? They said sure. I called Monday August 25th. They said I should receive it by Wednesday August 27th. I had to pay extra for the shipping. Here I am September 2nd w/ no bracket. Called again. They said it wasnt next day shipping, it was 2 day shipping and its at the post office. But the shipping number they gave me was for the one screw. I believe I should get my money back. I spoke to a supervisor, took her number down. Still waiting for a call because the mailman came and I didnt receive anything yet again.

Purchased a larger hot water heater after reviewing the offerings from the big box stores. Obtained a 40 gallon Lo-Nox type. No problem. Found that I did not have time to install and 3 months later had a company install for almost $300. Within the first month the pilot went out at least 5 times. Had the install company come out and take care of the problem. Worked OK for 2 months and now the pilot light goes out again. Watched the flames myself and find them to be yellow. OK, so try to see what the situation is, call the installer, then call technical support. I am in a basement, on a cell phone and the representative basically has zero patience, zero tolerance for questions, treats me like an idiot and probably has never looked at any of the guides but keeps harping on me.I asked 5 times for patience and guidance not to be treated like an idiot. As time went on it was clear that the representative has zero experience in front of the product or the information in the install guides. She kept calling it a manual and I tried at least 3 times to ensure that her manual is the install guide. She never did affirm. I stated I wanted my money back and she stated no. Whirlpool has a very skillful representative to keep consumers away.However this consumer is a small apt owner that purchases appliances, as well as hot water tanks microwaves etc. No longer will I purchase anything Whirlpool. Oh I will send a complaint about this rep, and she said thats fine send it to the PO box Total lack of product knowledge and not even skillful in a conversation asking for assistance. The installer also stated that this product has horrible reviews. I wish I had seen them before all of this. Total frustration and something unwarranted. I am out $900 and am replacing the tank with a Bradford white from the plumber. Lesson learned. Good bye Whirlpool, hope others stay away from Whirlpool everything. Choosing another brand is the only thing that makes businesses wake up and smell the money.

A factory authorized technician came out this morning and repaired the washing machine. The bolt had come off of the pulley, which then fell off and burned through the guard, and then burned into the insulating on the bottom. The technician said this happens frequently. All that needs to happen is to have a Loctite bolt holding the pulley rather than a plain bolt which comes loose with the vibration. All Whirlpool had to do was spend a couple cents more for the proper part which would avoid potential fire! I should not have needed to have had my home put at risk, needed this service call or pay all that extra money because of their poor workmanship and design failure. This should be a recall item, and all costs incurred by the consumer should be covered by Whirlpool.

I bought a Whirlpool microwave oven last year.The last one year, it has worked fine. The day after the warranty period was over, the microwave oven is not working .The rotating part is not rotating, so I called your customer care center. They sent one guy to trouble hoot, he said that the rotating part is faulty and I need to spend around Rs. 3,500.00 to rectify the problem .The cost of the microwave oven is Rs. 6,500.00.How can I spend Rs. 3,500.00 to rectify the problem? That too, how it happened the day next to the warranty period. Now, I have a doubt that as I purchased the article in Saravana Store T Nagar/Jayachandran stores in T Nagar, whether I am getting such kind of problem. Because when I purchased, they gave me a lot of gifts. That time itself I suspected.I trusted Whirlpool Company. I heard that Whirlpool Company is good so I purchased a double door fridge 5 years ago. The same problem I had when I purchased the fridge, the day next to my fridge’s warranty period, it happened to me. That time, I did not think like that. But now, the same problem happened to my microwave oven. So, I am suspecting about the genuinity of the Whirlpool Company. I am totally dissatisfied about the product of the Whirlpool. I will give you my microwave oven. You take it freely. You can use my microwave oven for your demo purpose. So that in the future no customers will have problem which I had. Do reply to this mail and let me know when you are going to come and collect the article.

Received power bill and it had doubled. Went straight to water heater. Bought water heater 02/11/2011 and 12/25/2013. The brain they call it on top of the heater has a screw that has blown through the metal plate.They do not sell this type of heater at the stores so this must be a problem with all this type heater.

Just bought a Whirlpool stove (WFE540H0ES) from Home Depot. Oven gave off so much heat around the handle that I burned myself opening the door... Tech came out said it wasnt supposed to do that. Called into Whirlpool to get clearance for a replacement and corporate says no to the replacement because that is normal. Thats BS! If that is normal DONT BUY A WHIRLPOOL!! BTW... They are owned by Maytag.

My wife and I bought a Whirlpool Cabrio washer and dryer set in 2011 and now the washer has an error code of F7 E5. I spoke with an appliance guy and he says that it is going to cost up to $450 to repair it. The wash cycle does nothing, it just sits there and then it goes to the next cycle. I have grown up in a household that had washing machines that lasted many years. This is a joke. Why am I having to buy a new washer in 3 years? I dont understand. Whirlpool knows that this is a problem and they should step up and do a recall or some kind of discount towards a new machine. This is ridiculous.

Bought this washer and dryer on sale at HD. The washer hasnt worked from the beginning. The clothes dont get wet because its an HE. I have to add buckets of water to even get the clothes wet enough to wash. The clothes come out with a residue on them. We use liquid HE detergent. It appears Im having the same problem as the majority of posters here. I will NEVER buy another Whirlpool appliance. There should be a class action suit to get Whirlpool to respond.

Thank you EPA for requiring water limits on manufactures of washing machines. As a result, I am forced to use the deep water and extra rinse functions to get clothes half way clean. So much for saving water! This Whirlpool Cabrio machine cost way too much for such lousy results. Additionally, I have to purchase a special product and clean my machine every month or two. Ridiculous!! I yearn for the old days when I could wash my clothes and they would actually come out clean.

It works quite well except if you put items in the back of the top shelf of the refrigerator it will freeze them as if they were in the freezer section. I have a bottom freezer and that works quite well. And it is very quiet when running.

I’ve had the dishwasher for at least 3 yrs. if not longer. I have a long history with Whirlpool products and so far I haven’t had any problems with my past purchases. They normally wear out from age because if you take care of it normally they last for years.

The interior features such as turntable, etc are very cheaply made. As is the case with most Whirlpool appliances, this one is way over engineered to focus on appearance and gadgetry. This is not a good microwave for a serious cook who prefers that the design focus on functionality and ease of operation.

The dishwasher is quiet and seems to clean most all of the dishes even when there is dried on food remnants. Multiple cycles that allow for light, medium and heavy cleaning. Also the ability for air dry and minimum use of water. The size is appropriate for normal amount of dishes, pots, pans, etc. Stainless steel front with most of the controls hidden. I have always had good luck with Whirlpool products, with this dishwasher continuing with being a quality product for the amount of money spent.

Whirlpool fridge with ice and water dispenser that broke down within days of install. The water dispenser stopped working after the first flush and Whirlpool were notified. They engaged a useless repair company who have been unable to resolve the problem and will not communicate updates. Whirlpool have been fully informed of the problem with their brand new product which was defective practically from the start and have washed their hands of any involvement in resolving the problem with their appliance. They defer defective product as a warranty issue and leave the consumer to chase after people to get a repair done. For a brand new $3,700 fridge that doesnt work within a week of install I just cannot believe they would sell a defective item and make their consumer suffer for it.What consumer would knowingly choose to purchase a defective appliance? If you end up getting a defect, the company should make it right....right away. Im at 2 months now without a functioning water dispenser on a fridge that is only 2 months old. Just disgusting.

Most dissatisfying experience with Whirlpool. In 2013 I bought a stackable Whirlpool washer and dryer. Everything worked well for two months, and then the washer started having problems. The washer memory board unit (MBU) needed to be replaced. This was done under warranty. One and half years later I started getting the error F07 which means an electrical problem. I called Whirlpool and they told me a technician would cost $85 for a service call. I delayed the call until today.The technician came, did a diagnostic and then advised me that I would need a new MBU. The cost plus labour amounts to almost the cost of a brand new washer. To add insult to injury, Whirlpool advised the service call would cost $89. (They upped the price since my last call.) You can imagine my shock when the technician told me that the $89 covers the first 15 minutes. I paid $133.34 for one half hour diagnostic testing and to be told I need a new MBU which is on back order for at least 6 months!!! My recommendation is - NEVER BUY any Whirlpool product ever.

I saw on the Today Show that my Whirlpool Duet washer, purchased in 2008 was a mold-producing nightmare. We are now part of a class action lawsuit that seeks redress. When I called Whirlpool Customer Service, I was fed the company line that the problem is that we dont clean the machine regularly. The instructions call for monthly maintenance, but the rep said we need to wipe it dry after each use. This is an original defect in the machine that Whirlpool refuses to own up to. We had been Whirlpool devotees for years but will never purchase another Whirlpool product.

Purchased Duet Washer and Dryer just over a year ago. Recently liquid detergent has been seeping into the tumbler and damaging clothes if theyre not removed immediately after wash in complete. The precision dispenser cartridge is the culprit in my opinion. Its suppose to dispense detergent as needed however it doesnt stop dispensing. Called Whirlpool and received no satisfaction. I would not recommend the Duet washer as a new purchase. I have to pay the price for Whirlpools experimental dispensing device and I dont think its fair. Its a flawed device and they should fix it.

I have a Whirlpool Cabrio washer. It was great for almost year. After that it has been nothing but trouble. The body of the washer has rust coming through the paint and large areas that is so rusted that the paint has chipped off completely. A washer is expected to deal with water and not rust through the body. I have a 10-year old Ford truck without a speck of rust. Dont they undercoat? The circuit board has had to be replaced because of rust. I have to take several Q-tips and go under the cover to remove all the rust if I dont it gets rust stains on my clothes, which is impossible to remove. The customer service is non existent. They have left me on the line for over 40 minutes. I hang on only because it would be another hour or so of my time to get someone to answer. I was without a washer for a month while waiting for parts. Why dont they have parts for their products? I had to slop my way too dirty laundry mats 3 times a week as I do 2 to 3 loads a day.My washer is downstairs and stops and gives me the unbalanced message even when its not, running up and down the stairs several times to complete one load. I also get the F51 message for no perceivable reason. The extra rinse button only works 1/2 the time. This was an expensive washer ($1,000.00) and I feel that I deserve my money back. They are knowingly making an inferior product.

I purchased this machine about a year ago and it is the biggest piece of garbage on the planet. The biggest problem is that it will not spin if the load is even slightly unbalanced. It does not clean the clothes. If you try to rebalance and spin the load, it adds more water and then gets stuck in a cycle where it drains and adds water forever. Do not buy one of these. I am finally surrendering and buying a different machine. A total waste of money.

The cabrio washer that we purchased in 2010 did a good job of cleaning the clothes but the case started rusting within 6 months. After service calls and e-mails and phone calls, there have been no helpful suggestions beyond buy a complete new case. I hesitate to do that because I am convinced there is a design flaw in the area where the soap dispenser is located which allows the soap to flow between the case and the drum and it eats away theinside of the case through the inadequate paint covering on the outside of the case. It is a mess. Now the instruction panel is bubbling and lifting. I carefully care for my equipment and have kept two washers over 15 years and they still were in good shape with cases still looking new. This is not something I am doing wrong. It is a piece of junk with a terrible paint job and it cost more than any washer I have ever had. I wish I had some recourse. I am on a fixed income and had hoped this would be the last washer I would have to buy. I have photos.

Whirlpool Microwave oven (Model # WMH1163XVS) handle cracked and Whirlpool told me the damage is cosmetic and they wont cover it. The microwave is only 7 months old and I am very easy on appliances! This is faulty workmanship and defective!

I purchased this microwave in September 2010. It was installed in a vacation home, so it has actually been used for less than one year. It has now stopped heating food for the fourth time. The previous problems miraculously fixed themselves after flipping the fuse for a few minutes. I guess I should have been suspicious at that point, but I figured maybe I had overheated something. But this time, the problem has not corrected itself. The Whirlpool representative that I spoke to, while very polite and personable, only scheduled a service call that will cost me $89.95 PLUS parts and labor. I asked her if other people had reported this same problem, since it had happened to me several times. She told me NO. I decided to do some research myself (yes, I know; I should have done this BEFORE I spent $578 on a worthless product) and found that many others have had the same problem, and that this is obviously a defect in the design of this unit. Unfortunately, I purchased the entire Whirlpool package because of a special rebate available at the time. Now, I am wondering if my other appliances will begin to break down in the near future. After reading about the experiences of others, I am calling to cancel the service visit. I will be removing the microwave from my kitchen and purchasing a new one. Whirlpool has lost a customer. I will NEVER purchase a Whirlpool product again.

Brought brand new. Had for ten years. Still going strong. Matter of fact all appliances are Whirlpool. Dishwasher, stove top, oven. I like the sharp clean look in my kitchen. Easy to clean!!

Like many other reviews Ive read here this morning, I bought a Whirlpool Cabrio HE Top loading washer before I did my homework. I purchased approximately 2 years ago. While I dont seem to have the volume of complaints Ive read from others, I do have many intermittent complaints. As others have described, from day one I have gone from this uneasy feeling about how it is working to down right POd about the condition of my clothes after a load finishes.List of issues you will avoid by buying a different product: 1. Water levels SO low your clothes dont get clean. Yes Whirlpool, thank you for trying to save me $$ by lowering my water bill, but for goodness sake there should be enough water in the damn tub to cover the load. I literally watch dry clothing twist back and forth and NEVER go out (like they claim) to the edge of the tub and under then back up in the center. Instead they just sit there watching from the edge while the poor items of clothing in the center get twisted together.2. Powdered detergent, even if listed as HE will not dissolve in this low water level and will end up as white patches of film on your dark clothes. Suggestion to avoid this - dont use powdered detergent, but even if you use liquid HE detergent, you may still experience white patches of soap film on your clothes. It happens on all of them but shows up clearly on dark clothes. Setting the washer to always do a 2nd rinse cycle will improve the outcome. Not a perfect solution since the point of a low water washer is to use LESS water and not more by running a 2nd rinse on all your loads.3. No Consumer/User options to allow you to use the washer as you see fit. Since I paid a small fortune for this stupid washer and didnt realize that I would never again be able to dye fabric in my washer I am posting this as a warning to other crafty consumers. DONT BUY THIS WASHER if you ever want to dye fabric or an article of clothing larger than underwear. There is absolutely no setting on the washer cycles that will fill the tub with more than a few inches of water. The washer falsely has a mislabeled setting called Deep Water Soak. This is absolutely a LIE. Good thing I tested the cycle before putting my blanket in there to dye it. The cycle spins many times in the beginning pouring water into the clothes, then empties the tub and does it again. Then after 10 minutes into the cycle it begins to fill (if you want to call it that) the tub.After putting about 3 inches of water in the tub - not even enough to cover the top of the articles in the tub (I used 6 towels as my test subjects) it stops to soak. But stuff is still sticking up out of the water!!! OMG! So frustrating. This would not do for dyeing anything of value as you would not be able to agitate enough to ensure coverage of the fabric evenly with dye. Just dont buy this washer if you have, as I have in the past, enjoyed changing the color of linens and re-dyeing dark clothing that have faded! Whirlpool clearly didnt care about how consumers actually need to use the washer. I may try using this setting by pausing and filling it manually with buckets of hot water from my sink to get enough water in there to cover the fabric. Its just ridiculous that I even have to consider how to outsmart my washer!4. Smelly clothes. Seriously. I do the obligatory monthly Affresh cleanings, and I have learned to leave the lid open after the last load of clothes so the tub can air dry. However, I still from time to time pull a load out of the tub and it smells like mildew. And dont think for one second that the smell will go away when dried. I have opened the dryer and pulled clothes out, smelled the mildew and put them right back in the washer for a 2nd go round. Nothing worse than putting on a clean nightgown and smelling like mildew! Ewe!! With this awful washer you can NEVER leave a load of washed clothing sit for any length of time or you can look forward to smelly clothing. Hate it. Absolutely HATE it. Again, this defeats the purpose of using less water.Cant make myself spend more dollars that I dont have in the budget to replace this piece of crap. I have figured out all the workarounds for now, but as soon as I can replace it I will send it to the dump. Not going to resell or donate to anyone else as it would just be a burden for others. If there was ever a rightful need for a class action lawsuit to compensate consumers for false claims by a company - this is it! Hope this helps prevent anyone reading from making the poor purchase decision I have!

Have a Whirlpool side-by-side with water and ice dispenser on the door. It has lasted over 20 years. It has a large ice maker which makes more than enough ice and it has never broken. Since it is older it does not have gallon depth shelves on the door, but I have never missed not having them there is plenty of internal shelf space.

Microwave model WMH73521CS-2: Microwave is approx 2.5 yrs old. This is the 2nd time we have had problems with door open and close msg appearing on display. We had to have door latches replaced once and again are having to have it serviced again. $100 for service to come out again, does not include cost of replacement parts. This seems to be a consistent problem with this model. We are not replacing the parts and are buying a different microwave. Definitely not Whirlpool. I called Whirlpool and was on hold for almost an hour and received no resolution to problem.

Our washing machine - as part of a stackable set - is two weeks beyond the one year warranty. Washer breaks down, I order the replacement part to find out - after waiting two months for the part - that the washer is now being discontinued so the ETA on the part is NEVER. Ask what Whirlpool will do about this and am advised that they will offer me a discount on a washing machine that does not fit on the stackable dryer. Or I can purchase a new washing machine at more than the original cost of the stackable set.This is a totally unacceptable situation. The washer is just out of the one year warranty period and it is already being discontinued??? Is Whirlpool making disposable appliances now so that after the one year warranty we just toss the appliance in landfill? Really? Unable even to purchase replacement parts to repair a one year old appliance? I will think long and hard about ever purchasing another Whirlpool appliance again.

I have had a lot of washing machines in my life and trusted that Whirlpool would have good products. Well, with this top-loader, I couldnt be more wrong! I have never had a machine that just sloshes clothes around - at best - leaving them just as dirty! Our water bill has greatly increased on top of that - I AM SO VERY DISAPPOINTED! Unfortunately I cant return the bad merchandise since I bought at a Scratch and Dent store (just a dent on the outside does not interfere with performance...).

I purchased a Whirlpool refrigerator with an ice maker exactly 2 years ago. It stopped making ice. I called a Whirlpool repairman and he said there was a leak in the freon tube. I should get a new one. I did, am trying a basic GE with icemaker.

After many phone calls and letters to Whirlpool about the AquaLift cleaning system in their new stoves, that does not work at all. I finally spoke to someone at the corporate office with a brain! I am happy because Whirlpool refunded my money and removed the stove. That was the outcome I was looking for as this new steam clean thing of theirs does not work on a dirty oven. Hopefully, they will work on improving these stoves and restore consumer confidence once again.

In 2015 door of top loading washer (Whirlpool Cabrio Washer) needed total replacement. Lucky I had an extended warranty. 2018 March, extended warranty expired and now have the exact same problem. Pretty crummy product if major part like a door has to be replaced every 3-4 years. We do not wash large items like blankets/quilts in this machine. That goes to a laundromat where there are oversized machines or to a dry cleaner. So the only reason for this breakage is a default in the lid assembly. There is only one phone number for customer service, repair, parts etc. Put in my service call and filed a complaint at same time hoping for at least a small discount. Ha! $100 plus tax for service call- part price ranges from $150-230 plus tax. Whirlpool could tell me the part exists but would not say how long it takes to get it! Do NOT buy Whirlpool washer with top load lid that has glass window. Big problem is that Whirlpool now has Jenn-Air, KitchenAid, Maytag and Amana all under their umbrella.

We purchased a new Cabrio top loading washer in June of 2011 to replace a Maytag Neptune (thinking at the time that wed gone as low as possible). We didnt abuse the machine. In fact, because it had a tempered glass lid (in a plastic frame), we were careful with the lid on the machine. It broke during a wash cycle. Because its heavy, the lid has spring supports on both sides; these are stronger than the plastic frame and over time the frame will break, rendering the machine inoperable. The discounted price for a new lid is over $200, and Maytag (I mean Whirlpool) tells us that it lasted through the 365 day warranty, so the bill is on us. It may be green when it works, but taking 18 month appliances to the landfill is not very green. And others on the web report say that the lid only lasts a year or so. The ratings scale needs to have negative values. Id give this appliance a -5.

We moved to a new home with all new Whirlpool appliances. We have been here 4 weeks and so far the stove has had a faulty part replaced in oven and now my microwave will not fully pop popcorn. Wonder what to expect next?? If you have a choice dont buy this brand. Inferior product.

I purchased a Whirlpool Duet washer from a local appliance store in May 2009. I also purchased a 60-month extended warranty covering the washer until May 2015. I was shocked when I tried to use the washer today (May 16, 2012) and it would not turn on. I called the repair facility the appliance store supplied as the warranty repair facility, only to be shocked again. I was told the appliance store suddenly went out of business and my ($130) extended warranty was no longer in effect and I would have to pay for repair out of my pocket. I then called Whirlpool knowing they would stand behind their faulty $740, 3-year old washer. They told me there was nothing they could do because the one year warranty they offered was over. I had a repair person look at the washer and he told me a control board had to be replaced and the repair would cost at least $550. I told him I was just going to buy a new washer. I had not been happy with the washer from day one and was very sorry I had purchased it. It did not wash the clothes very well. Also, I had a musty/moldy smell in my basement that would not go away no matter how much I cleaned. The repairman told me today that the smell is coming from the washer. I just cant believe I am out almost $1,000 and there is nothing I can do about it. After reading the many reviews on this website about Whirlpool appliances, I am sure they will not be in business much longer. They should be ashamed of themselves for what they are doing to consumers like myself especially in todays economy. Is there anything that can be done about this?

Problem of refrigerator is working good for a few days, then the freezer is all melted down for a few days, then back to working good again. Model: FD2560HES. Serviced on and by: 7/16/2015 - ** - told me the controller board is bad, need to order part. 7/23/2015 - ** - replaced the controller board. Resulting same problem. NOTE, which means my old controller board is as good as the new one. 7/30/2015 - ** - opened the freezer, back of refrigerator, told me the compressor is no good, gave me an estimate of total cost $817.86. I did not accept the proposal, and I did not agree the compressor is no good. I called and scheduled for service after and scheduled to have service on 8/4/2015. Then got called from the office, said, Cant come on 8/4/2015 and told me I have to pay the $95.00 first visit. So I called and spoke to the manager, then scheduled for next service.8/13/2015 - ** - when he came, the refrigerator is working fine. He said, Cant diagnosis the refrigerator, told me to call for service when it is not working. He said the compressor is good. 8/15/2015, early morning the freezer is all melted. I called, been told cant service the same day. 8/17/2015 I called the office (1-888-717-9322), requested to talk to the manager, promised to call me back. By this date 8/28/2015, still no call back from the manager. They are located in Michigan. I was told the local office address is: 9582 Katella Ave., Anaheim, CA 92804.

Our whirlpool gas range has a defect - the material around the control panel is peeling and flaking; it is not possible to clean it and it is likely going to get into our food. It has not been cleaned with anything harsh - I use warm soapy water or stainless steel cleaner. I use the same thing on my other appliances and they look fine. I am waiting for a tech to come and look at it but after reading other complaints I fear that they are going to say it is cosmetic and it is not covered. Sadly, we can no longer wipe the control panel if it is dirty because the stainless steel is flaking off and it gets all over the burners and I am concerned it will get into our food. I am willing to bet the paint that is flaking off is not approved for consumption.I wish I had our old Frigidaire Gallery Series range back. I regret replacing it. Whirlpool was not helpful. They told me to contact the place I purchased it. The place I purchased it said it is a manufacturers defect. Someone suggested painting it with stainless steel colored spray paint which sounds like it is going to look awful. The new panel is $148 but it will need to be installed and if there is a defect how often will I have to replace it? I am very disappointed.

Worst appliance we have ever bought. Our last fridge (also stainless french door) we had for about 14 or 15 years and only the door bins cracked that we put gallon milk jugs in (dont do it - they are too heavy and get warm from the door opening). This fridge is a piece of junk. We were told it was stainless - rust spots started appearing the first year. The deli drawer lid broke within a month or two, but I didnt care about that so I just threw it away. The ice machine stopped working a little after the first year. Today however is what got me to write a review - I spent a couple of hours trying to duct tape and make wood supports to hold up the frame for the produce drawers - one of which is totally cracked when it fell from having the support break. While doing this I noticed there are hairline cracks on the front of all 4 of the shelves! Also, this one has a wire basket in the bottom instead of a full drawer - probably more supportive, but it means stuff constantly falls into the bottom of the fridge and it is extremely hard to get in there to clean.

I bought a new top loader Whirlpool washing machine. Water would not drain enough so that the clothes could be dried in the dryer. It does not have the thing in the middle that you put your clothes around. My clothes get tangled together all the time. A repair person came and said that I needed to load the clothes in a different way. Different from what the salesperson told me. Still tangled and still not dry enough to put in the dryer. I have to use the drain spin cycle every time!!! My dryer still takes 120 minutes to dry a load!!! Second repairman comes and tells me I need a new computer system and I will have to use the laundromat. A month later they tell me they cannot get the computer and will replace the machine which is still brand new. Bring new machine and my clothes still will no spin enough so that they are dry enough to put in the dryer!! So sick of this and will never buy another Whirlpool product again!!!

I purchased my Whirlpool refrigerator from Whirlpool guest system (online) in 2010 for around $1,160. Recently, it stopped dispensing water from the dispenser. I called the Whirlpool certified A&E serviceman to repair the dispenser. He concluded that the water line is frozen inside the door. He also stated that such issues with the door shouldnt happen for at least 10 years. He gave me a bill of $920 to replace the door. I called Whirlpool and they declined to pay for the repair as it is out of warranty. I feel that they sold me a faulty refrigerator and they should pay for this expensive repair. With $920, I can probably pay for a new refrigerator (not Whirlpool, of course). I am completely disappointed by Whirlpools customer service and poor quality of their product. This company, I believe, is more interested in selling crappy products, make profit and not provide good customer service. Shame on you!

I paid ~$1200 for a new Whirlpool (French door top fridge and pull out freezer bottom) 7 years ago when I bought my house. I was so excited - and the appliance has been a problem from the beginning. It has always made a very loud knocking noise - even when it was new. I was told by the technician there was nothing he could do and Home Depot wouldnt help me with it either. My freezer has gone out three times - the last time was the day before Christmas Eve 2016 (a few days ago). I lost everything for my Christmas dinner that was in my fridge because that went first.Then when the service man came today, I was told it was the freezer that is causing the problem and everything had to be defrosted - plus they had to order a part that would take 3 to 5 days - so Im now going to lose everything in my freezer as well. All in all with the three service calls and the food I have lost probably amounts to around $800 - $900. I am so upset and cannot get any help from anyone. So, Im just warning you - NEVER buy a Whirlpool!

All of sudden, this expensive microwave stopped heating. Called whirlpool, they said they will charge $300 to fix it and $540 to replace. So much after paying new piece of garbage in 2-3 years.

It is in the mid-range of cost and functions. For a mid-range dishwasher, it has many options, sometimes too many. It does not have rinse and hold. I think its cycles run too long; not always energy efficient (i.e. the simplest one uses the most energy).

Whirlpool Energy Saver Dishwasher Model DU850SWPS3 was placed in our new home purchased in May of 2010. We just found that this dishwasher had a slow leak in the seal to the motor which has ruined our hardwood floor, subflooring and part of a laminate beam on the floor directly below the washer, plus molding from the water. The leak has been going on sometime it was not noticed until the floor became so soaked from use over a long period of time that we finally saw the leak, by accident, in the basement which we hardly access. The Whirlpool costumer service was no help and would not entertain repairing the dishwasher unless we paid due to the fact it is over the year warranty. This is clearly a defective part in their product and poor workmanship on their part. We should not have to check underneath our new appliances to determine if we have leaking problems because we cannot trust them from failing. I will never purchase another Whirlpool product and will not recommend their products to anyone.

My new washer quit working properly. It does not spin or wash properly.

In January 2021 I purchased a front load Whirlpool washer and matching dryer. They were delivered on February 6 2021. The first load we found water on the floor. I thought I didnt close the detergent drawer so I proceeded with the next load. Again I found water this even through the ceiling tile in room below. So with the next load I sat in laundry room to see what was happening. When on the rinse cycle water shoots out the front of the dispenser drawer.Contacted service, they sent repair man. He ordered new parts and I waited over 3 weeks for next repair call to find out that whirlpool had part all along. Repair man came again and still no resolution to issue. He was told to order same parts again - still no resolution yet again. I fought with Whirlpool till they said they would give me a new machine. Now fighting because delivery people wont uninstall 1st washer and install new machine. Today is June 28 2021 and I still DONT HAVE A WASHER TO USE. I havent even used the dryer yet. I have $3400 and numerous hours with Whirlpool trying to resolve this issue! Can you help? Whirlpool continues to string us along, telling us to be patient, theyre doing their best.

Whirlpool refrigerator - I purchased $6950.93 in Whirlpool products in one day last year at HH GREGG in Lexington, Ky. The refrigerator was purchased on that day September 18, 2012 and my kitchen wasnt going to be ready until December, but I wanted all items bought for measurements (specs) for the new kitchen designer. HH GREGG delivered to my garage October 26, 2012 because they couldnt hold any longer, but when we purchased that day they promised to hold till December when my kitchen would be finished. I have Proof from the kitchen installers the day they finished, December 28, 2012, was the day the appliances were installed. Well here I sit typing this letter on January 7, 2014 and my Whirlpool refrigerator is as of right now is in need of a compressor while losing approx $1000.00 in purchased food. In other words, approximately $900.00 in repair cost. Isnt Whirlpool a large enough company to stand behind its products when I paid $2599.00 for this refrigerator for at least one year from installation instead of purchase date? My fiancee has been trying to work out a solution with Whirlpool and the parts are on back order now. For at least two weeks we have been without a refrigerator and have two young children. Doesnt it show that the parts being on back order from Whirlpool, barely being a year old prove the defective product is being sold to the public daily? I plan on going further with this action due to the name Whirlpool all over my kitchen which disgusts me. Im going to write every columnist I can and do all I can with what little resources I have against this large company if no one helps us. This is absolutely an injustice against consumers...

I cant even tell you how disappointed I am. This washer has destroyed my clothes and towels. Ive tried to reach out to company but they want me to call for service. What would I call for? Washer works, it just makes holes in clothes, in towels. There are so many complaints about this. If anyone know how to begin a process like this, please let me know. Trust me, when I write a review about something, its got to be either really good or really bad. I dont have time to write things like this.

I purchased a washer/dryer around March of this year. I have nothing but trouble out of both of them. It doesnt matter what cycle the washer is on. Its like it has a mind of its own. It may wash; it may not. Sometimes, it takes over an hour for it to finish washing. The dryer sometimes dries on one cycle; the next time, it wont. Who would think a brand new appliance would do this. Every appliance in my kitchen is Whirlpool. They dont give me any problem, and I use them everyday.

Bought the Whirlpool Duet washing machine. It lasted around eight years. In the meantime I was replacing the rubber door seal cleaning out the pump constantly. The plastic pieces inside the drum all broke. Every few months I would get an error code. And During spin cycle it would literally shake my entire house. The problem with all the front loaders is the construction of the drum and the drum bracket. They are made of dissimilar materials. (Stainless and zinc) When you add soap to the water then the bracket becomes an anode and the drum becomes a cathode, which creates electrolysis which corrodes the bracket. When the bracket breaks your machine is totaled. I’m finished with every manufacture except Speed Queen. I bought a Top loader Speed Queen and I love it, it is built like a tank.

WTW8800YWO Whirlpool Cabrio washer, 4 yrs old! Replaced!!! Its a poor quality washer -- the bearings go out. I purchased this washer and matching dryer at Lowes following a house fire. I initially thought the water saver was a good feature. Unfortunately, my clothes were not clean and were covered with lint following each wash. I have had to replace the ring inside the washer due to shifting and causing water damage to the new flooring. I soon became disappointed with my purchase, but until the noise became so loud in the spin cycle and the repair exceeded the initial costs, I kept the washer. I am another consumer who would NEVER purchase nor recommend a Whirlpool W/D. The repairman said, If you want a washer built to last, buy a Speed Queen!

Whirlpool Cabrio Elite Top Loading Washer Model WTW8240YW - I add my complaint to the roughly 2000 others about this machine and Whirlpool. Two months after the warranty expired the machine started making a loud noise on the spin cycle. I called a repairman and he said it was the main bearing going bad and this was a common problem with this model. He recommended buying a new washer rather than repairing the unit because the cost to repair was greater than what I paid for the washer. I called Whirlpool and all they offered was to send a repairman at my cost. This is terrible service for a documented problem that they have. I will buy a new washer but it will not be a Whirlpool!

After 7 calls to Whirlpool and 3 service calls, we still have white detergent stains on all our clothes. Today Whirlpool told us we needed to put one item at a time into the machine. Not only that, but pants needed to be loaded waist band up and gently placed; Shirts, collars up; socks toes down, etc. etc. Are these folks at Whirlpool serious?? So today, we called them back - still streaks. The folks at Whirlpool want us to take and send them pictures of our clothes. This is ridiculous.

I purchased a Whirlpool dishwasher and have had it repaired four times so far. Last time they replaced the main computer located in the door. I attempted to use the dishwasher tonight and it is completely dead once again. I usually have had good luck whirlpool appliances. After all these problems will no longer be using this brand. I contacted the store where I bought it from, Famous Tate. The first time it stopped working just a month after the manufacturers warranty ran out and they were absolutely no help. So in the future, I will no longer buy any type of Whirlpool appliances.

Purchased a Whirlpool WTW7800XW a year and a half ago. The left top of the washers glass pops up, making it impossible to use the washer unless I weigh it down. Apparently a screw has popped out to hold the glass in place. Whirlpool used to make a decent product, but thought I should pay them $129 for their time, just to come out and then an additional part fee. How about the 30 minutes I spent on the phone with no satisfaction. My time is also valuable. I gave them the choice to come out and replace the screw (which shouldnt have fallen out in the first place) or lose a customer. Fortunately, I have a husband that can repair it, but I am extremely disappointed that Whirlpool is now making substandard products. We are a family of 3, so its not like Im doing laundry daily. Am I wrong to think I can get at least 3 years out of a product?

I purchased a washer and dryer set, the Cabrio Platinum Series WTW8500BRO, about 3 years ago. I had a UL code come up a year ago and the machine was serviced and all was back to normal. Then only 9 months later it started acting up again. This time it sounds like an airplane taking off and there is a black spatter leaking from underneath, also the lid lock stopped engaging. I started to look up the error code for the lid lock and while reviewing that issue it was an easy fix, however, the noise and black spatter issue led me to tons of horrible reviews about this product. It is a bearing/tub/shaft issue that is going to cost me $500 to fix. First off I did not pay cash for this set, I rented it for 3 years and paid twice what it’s worth, around $4,000. Stupid on my part but I couldn’t afford it the other way. Weekly payments were easier. Now I am scared to fix this product because of all the reviews I’ve seen from other consumers. I haven’t had the other issues like dirty clothes, not enough water, high cycle times because they all start with a high number but after it configured the load the time shrinks, but this major issue about the bearings, they say I have to replace the entire tub assembly which is half the cost of the unit. So stupid and I cannot believe Whirlpool is getting away with this crap. Please please please inform me about any lawsuits. I will gladly participate in that. They should be held accountable for such a worthless piece of junk. Like I said I am now afraid to fix this machine because from what I’m reading, more than likely it will only last a short time.

We bought a Whirlpool front load about six years ago. We have had nothing but trouble with since we have owned it. First, the sensors went out on it. We had to pay over $300 to have that fixed. Then, it wouldnt run right. We had to pay another charge for that. Now they tell me the water valve is bad on it. If I had known at the time the problems I was going to experience with this washer, I would never have bought it. I fell for the price. We paid for it. We should be getting better service from it than we are. I could have bought 6 regular washers for what I paid for this one that doesnt perform like it should.

I bought a Whirlpool Dryer after reading an excellent review in Consumer Reports, despite it costing more than I wanted to spend. The first thing I noticed was a thump, thump, thump with every rotation of the drum. Then I realized that it took twice as long to dry my laundry as my 45 yr. old GE dryer, which only needed a belt, but which wasnt available anymore. I was disappointed in the Whirlpools performance, but that was only the beginning. One night when the dryer was less than 3 months old, I was in bed for the night and I heard the familiar thump of the dryer running. I went downstairs and could not stop it as it did not respond to anything on the digital control panel. I finally unplugged it. I called Whirlpool and they sent a new control panel, but I had to pay the service man.Not too long after that, the dryer heated up, but the drum would not turn. The serviceman said that it had come off track and he reset it. Shortly after, the door would not stay closed as the clamp that held it shut had fallen inside when I pushed the door closed. I replaced that. Then the drum continued to come disengaged because it was out-of-round. But, of course, the dryer was out of the 90 day warranty period too and a drum replacement would have cost more than the piece of junk was worth. So, I had it put back on for what I told myself would be the last time. Well, it was the last because the control panel went bonkers again and would go on by itself and only ran on one cycle if I plugged it in and unplugged it when it was done. I finally gave up and bought an inexpensive analog GE dryer which I never had any trouble with and dried the clothes in less time with less noise.

I purchased the Cabrio washer/dryer in 2006. We have had it repaired 6 times and I even purchased a two year extended warranty after having issues with it the first year. Now I seem to be in the same boat. The washer will not spin and drain. This has already been looked at by a technician several months ago. I feel like this product is faulty and has not worked properly from the start. Are there lemon laws for appliances? It seems that this product would qualify. I will never purchase Whirlpool again.

We have a Whirlpool top freezer that is a very basic model with no bells and whistles. It is over 20 years old and has had no major issues. Tears in door seal have occurred but is to be expected with age and use.

Purchased the Gold Series Dishwasher Model No: WDF730PAYM0 Serial No: F14403489 on Dec 2011, started using it from Jan 2012. All is good until June 2014. It started leaking from the bottom, called Whirlpool - the great bad company. Since it is not under warranty they asked to schedule an appointment with their local authorized rip off service company. Technician come on the service day and told me that it is $120.00 for the service call and Labor and parts are extra, first of all $120.00 to come to my house is first rip off, that is the reason Whirlpool on their website do not give any estimates on the service call.After checking the appliance he said main assembly is bad and needs to replace and that will cost more than the original purchase price - what a ripoff. He asked me to contact Whirlpool, they may help since this is the known issue with this model. Called Whirlpool and mentioned and they said it is too old to continue to operate so they cannot help. Ended up trashing the 2.5 year old dishwasher for the new GE dishwasher. Never buy a Whirlpool ever again even on sale. Whirlpool company is not ethical and not ready to help consumer, would love to see them close their operation in America.

I called Whirlpool to have my dishwasher and fridge fixed. I knew exactly what was wrong with my fridge. I asked how much it would cost and was told $129.99. I asked why so much. I was told that it included the labor and service charge. I asked if I would need to pay for both units if I did it the same day. She said that the company provided a 30-dollar discount. I decided to only service the fridge at this time. I spent the entire day today, waiting for the service person to come. And when he showed up, I told him that the fridge needed a computer board. He then started telling me that it would cost $200 for labor. I explain that I was told that it should be $129.99 for service call and labor. And he said, No lady, its $70 for the service call and labor is $200. I then called Whirlpool where I spoke to multiple people within a forty-minute call to explain that this is absolutely wrong and that I am not going to pay for the service call. I then spoke to a Niki (3544) who is supposed to be a manager, who basically said my problem now is with the service company, not with Whirlpool and that there is nothing they can do even if they misquoted me. I agreed to pay $129.99 for service and labor, not an $70 service plus labor. I am so upset because I have been a client of Whirlpool for ten years. I have called for service on multiple items in my home, and I have never had a problem. This is so outrageous. I absolutely expect Whirlpool to rectify this mistake. I am also going to report this matter to the BBB and to Fox News. Whirlpool representatives should be able to provide a quote for one thing, and then when the service comes to your home, its a different amount.

I owned a Kenmore washer for approx. 20 yrs that endured 6 kids for most of that time period. When time came for a new one, I had to have the latest model, and settled on a Maytag Bravos approx 3 yrs ago. This was a huge mistake - I paid between 600-800 for this machine, and it is a piece of garbage. The repairmen here yesterday explained to me that Maytag and Whirlpool are now the same company, and also that all these machines are now made overseas because of cheap labor. In a nutshell, I was given an estimate of at least 300 to repair this piece of crap - he explained that they are only made to last a few yrs -where is the justice in this situation? I really dont get how these big companies get away with selling crap, knowing all the while that the consumer is getting screwed - yet people continue to buy them..

For the most part, the dishwasher performs well, but I wish they would ask the input of women when designing appliances. I just can’t figure out how having spikes on the top and the bottom racks is supposed to help in organizing your dishes better for proper cleaning.

Weve had our Whirlpool Cabrio washer and dryer just over a year. I like them both but then we are having problems with our lid. The first one cracked after 9 months and they replaced the lid. Two months later, the new one cracked and they replaced the hinges and lid again. I assure you we are very careful when lowering and lifting the lid. I do 80% and my husband does 20%, and we are very cautious of it especially after the second one broke. Now, I was just putting laundry in and the third one cracked while lifting the lid. There is obviously a problem, and Im wondering if anyone else is having the same issues. Eventually, it will crack all the way through which will cause the glass to pop up and the lid wont lock. I will not buy anything with a glass lid again!

I bought my Whirlpool gas stovetop in March of 2016. The burner knobs that connect to the stove is made of plastic and all 5 knobs broke within the first year. Each year I have replaced knobs and had issues with the knob breaking and then not being able to tell if the gas is off or on. I have called and talked to people at Whirlpool about this issue several times. Although they seemed concerned they will not replace the knobs and I have had to purchase them through Whirlpool. The gas stovetop obviously has a serious and extremely dangerous design flaw. I have kept some of the broken knobs just to tell others about this terrifying flaw. Again, last night the gas was on for several hours before we discovered it!! I called Whirlpool again and they were unconcerned. The Model is #WCG97US0DS00, Serial#D60509297. Beware and DO NOT PURCHASE this gas stovetop. I wish I had not bought mine.

We bought a Whirlpool refrigerator, model ED5LVAXWSOO. Although we didnt need or want the ice/cold water dispenser, we bought the model anyway. We have never hooked up nor used the ice maker/water dispenser. As the refrigerator was powering up upon its initial start-up after delivery, we found that condensation was leaking from the ice maker on the door. Upon closer inspection, we found that the hatch cover was not sealed and actually jiggled around when the door was opened or closed. A service man came, had difficulty with the issue, but eventually said he fixed it. It didnt leak again for almost three years. Then the exact same problem. (Remember, the component is still neither hooked up nor used.) Apparently, the opening and closing of the doors eventually caused the same defect to reappear. Of course, since the warranty has expired, Whirlpool sees no obligation on their part. But the value of a product is not based on a limited-time warranty, but on how the product holds up. This has to be a manufacturing or design defect as it came from the factory broken, and eventually the same problem re-appeared even though there was no wear and tear on the component, as it is not used. These products are much too expensive to begin failing after a few years. I would caution buyers based on the product being delivered broken (wheres their quality control?), its lack of durability even when not being used, and the Companys disavowal of any responsibility beyond the limited warranty period, even though it is a recurrence of the original problem (which to me means that it wasnt properly repaired/corrected during the service visit). Whirlpool eagerly grabbed our hard-earned money, but delivered an inferior product made worse, in turn, by its sub-standard service and lack of accountability.

Refrigerator stopped cooling... Paid $200 to have it diagnosed... Cost more than a new refrigerator to get fixed...$14,000. Refrigerator was 7 years old, energy star. How can it be energy efficient if it was made to last only seven years? How much energy is wasted making new ones to replace the broken ones, that cost too much to fix. Energy star. What a scam.

I bought this Whirlpool Cabrio Washer 3 years ago. Yesterday will be my last repair. I installed a new tub (bearing failed have to buy a full tub to replace), new suspension rods and a new stator and rotor (cracked). Last year I replaced a drain pump twice, and a computer board. All of these repairs since I purchased this washer have cost me well over $900 for a $1400 machine. I dont mind replacing a pump every few years but these larger failures are unacceptable. We have moved back to Kenmore on some new appliances we purchased this year as result of trouble with Whirlpool. Whirlpool should send out a recall on the suspension rods; the existing ones seize at the top and stop functioning causing the tub to shake excessively. This led to the cracked motor (rotor cracked).

Literally from day one I had an issue with my Gold Series which was aggravating but at least it was on warranty. Then 2 months out of warranty I had another problem, a leak. Now no water circulation. I think it is maybe 3 years old. What a piece of junk and my Whirlpool washer and dryer? Not much better. I will never buy another.