Bought Whirlpool refrigerator (Model # WRF560SEHZ00) December 2018. After 2.5 years, the door hinge failed and could not be replaced. $1,000 for new door. Dont buy! Too bad there wasnt a 0 option for the rating.

WTW8000BW0 washer - This is the worst washer I have ever brought. We bought a pair washer and dryer. The washer started making noise when it was in spin cycle so we called repairman. He came and said it would be better if got rid of it and bought something else. Said it would cost too much to fix and hes seen too many of these. The noise is so loud we close door on laundry room and we cant hear TV in front room. This is the worse junk we have ever brought. Whirlpool should be accountable for this.

Since purchasing original refrigerator 2 years ago I have multiple problems. Freezer was icing up to the point where drawers could not be opened, after numerous service calls, door was replaced which did not resolve problem. Refrigerator was replaced on warranty. Soon after light control circuit board had to be replaced. Next light control had to be recalibrated. Now, with the unit being approx. 1 yr old, rust spots are appearing on freezer door. Whirlpool rep advised this problem is not covered on warranty and would not provide any information as to what company contacts could be used to pursue the issue. Very upset and disappointed with product and customer service.

I bought a Whirlpool dishwasher from lowest in May of 2011 and it stopped draining, serial # f11601686. I was told it was under warranty and you sent someone out. But surprise, I got a $129 service bill and it couldnt be fixed, computer board gone and drain motor shot. I was told its cheaper to buy a new one. After 10 months of use, we need a new one. I think you should replace my dishwasher and pay for a service call. Oh, the reason they said it wasnt covered is because they sold me a 2007 model.

It was about 6 years after purchase that the ice maker completely quit making ice. To change the filter you have to get down on your hands and knees to do so. If youre elderly, this can cause a problem. Overall, it was a good refrigerator.

Bought this unit for our daughter that lives in a apartment building. She loves it and keeping her cool at night.

I bought a Whirlpool top loading washing machine with dryer on top, model # WGT4027EWo, last August, not even 3 months old and noticed the lint was not coming off the clothes. We tried cleaning out the washing machine with vinegar, wiping down the sides, using smaller loads and even used the gentle cycle. Nothing helped. We have had 2 different repair men out and they said there is nothing wrong with the washing machine and to put the clothes in the dryer and use fabric softener. I have never had to use fabric softener in my washing machine to get my clothes clean. When reaching out to customer service, I have spent over 2 hours and no satisfaction. They state that the technicians say there is nothing wrong with the machine. I was told by both of the technicians that they removed the lint trap from this machine, but no one is taking responsibility. My whites have blue lint and my darks have white lint, so too strong an agitation, as suggested by one repairmen is completely wrong! What to do when you spend over $1,000 on a washer/dryer combo and they dont work correctly and Whirlpool doesnt stand behind their product? Honestly, I will never buy another product from this company, and I 60 y/o and never made a complaint before about a appliance in my life!!! I dont even think I can give them 1 star! DO NOT BUY WHIRLPOOL - CUSTOMER SERVICE IS HORRIBLE!!!

Why does your AquaLift self-clean feature not work? Tried numerous times & have been scrubbing all afternoon... Horrible!!! My last oven (Maytag) self-cleaning feature worked awesome, just had to vacuum out ashes & wipe down with regular soap & water. Have no idea what to do to get this oven cleaned!!! Very frustrated...

I purchased a Whirlpool refrigerator less than a year ago and both the door and icemaker have a problem in which PC Richards, the store I purchased it from, has had to service the refrigerator at least 3 times and have not resolved the problem. The door does not close properly and every time I use the icemaker, condensation builds up. Each time a tech person comes to my home, a different reason is given. I need this problem resolved. I dont need to monitor the refrigerator like a sick patient.

For many years, I have worked on and tested water heater thermocouples. I have a lot of experience with this. I have checked around many of the wholesale supply houses to find a simple part needed for this brand/manufacturer appliance. Johnstone Supply, a national wholesale distributor, Grainger, etc. cannot get these parts. You must call Whirlpool and wait on the phone and give the operator the full story about what you found and how you tested the water heater only to be told you dont know what you are talking about. I was told that if the pilot lights and stays lit for even several minutes, that it is not the thermocouple but the gas valve and they will not sell me the part and recommend either I purchase a whole gas valve assembly and revised thermocouple or they would not sell me anything.Then I got told that I am on a waiting list to be called for availability of the parts at some time within the next 24 hours. Or just buy a new water heater from us with a warranty. Really? This is why you should not even have wasted your time with these people and move on to a better future. I asked,Can I purchase a box of thermocouples for this type of water heater with a left hand thread? The answer to this was, No, we will need the serial # for each unit that has had any part put on it. Move on, I say. This was a big waste of time by me, the plumber, and my customers happiness.

Whirlpool tells its technicians that the front molding piece on their dryers is a disposable part . Basically, it has to be removed to examine the console and removing it will break it 90% of the time. Therefore, the customer will have to replace a $100.00 part simply to diagnose any problems. I now have a dryer with no front panel simply because I wanted to know why a button was sticking.

Had the entire kitchen remodeled. We bought a Whirlpool Gold French Door refrigerator from Sears, did not buy an extended service contract. The refrigerator has NEVER made an ice cube. The water dispenser in the left door sometimes works, mostly not. The fridge freezes the food inside, temp. set at 41°F. The entire ice maker has been replaced, several valves have been replaced, a service company rep. tore the back off the fridge, found some insulation misplaced, said he repaired that. We have been very patient. Three repair companies have been sent out by Whirlpool, two said the refrigerator CANNOT BE REPAIRED. Whirlpool told me the only resolution is repair.Whirlpools Customer Experience Center is a joke, they do nothing but try to schedule another repair call. Tell you how sorry they are about your problem but do nothing to solve the problem. Carefully trained to give you the BIG runaround and nothing else. You never get the same person twice or the same city twice. Patients exhausted. Calling my lawyer. I would strongly advise anyone needing a new refrigerator not to buy a Whirlpool product. You should also check the list of other brands they make, there are several. I wouldnt buy them either. Buy a fridge made in Japan by a Japanese company. They get it right and know the Quality Process.

LED Freezer Lamp stopped after eight months, $14, not covered under warranty. OEM water filters are costly. Icemaker is noisy, ice dispenser chute clogs. When refrigerator was set at 38-40 degrees the eggs and most top and middle shelf items partially froze. Noisy compressor. Good price from Home Depot sale in Nov. 2019.

My first washer a Sears Kenmore lasted us 25 years before giving it to our son who used it for another 10 years. This machine is compatible with that one. Both are simple with a few of bells and whistles. That is remarkable in todays gotta have all of the fancy gadgets mindset. The Whirlpool machine does a very good job of washing clothing...period!

Model WTW7600XOW, installed 12/9/2010. For about 4 months this washer has sounded like a jet plane when spinning. I called Whirlpool to see if it was recalled or what they recommended. They provided 2 repair places near me. The repair shops recommended buying a new washer since the repair is so costly. A 4 year old washer used by 2 people should have bearings that last more than 4 years.

I have 2 rent houses. I purchased 2 Whirlpool gas water heaters with a 6 year warranty, from Lowes in 2010 and 2011. The warranty just expired on 1 and almost expired on the other. I read the reviews and decided I would not spend my time to get a part, I did not want to put any more money into a bad product. Both water heaters leaked at the Honeywell gas control valve without any warning and flooded both properties. I replaced these with Rheem gas water heaters from Home Depot.

This is a horrible washing machine. All the clothes (and I mean small loads, medium loads, large loads) come out twisted and so wrinkled. I have never seen anything like it. I dont machine dry many items and so everything not dried that way has to be ironed. Also, there is white residue of some kind left on the clothes so the extra rinse must be used. How is that energy and water-saver sufficient? Again, the government EPA in its brilliance has screwed up another product. It also takes much longer to wash clothes, again, energy efficient? After reading the wasted time on other reviews of talking to Whirlpool, I didnt even bother contacting them. HE front loaders (which we had a Samsung that lasted 1 1/2 years before breaking down) and replaced by this top loading HE, are the worst. Give me back my old fashioned washer.

ECO friendly top load Whirlpool washing machine - I bought this machine September 2013. Now it has a continuous clicking sound. It appears to be the lid locking mechanism and the washing machine will not turn on. It is under warranty and I am finding it hard to get a repair service in my area that is directed to Whirlpool to come and fix it. The only appliance repair in our area states that they will charge for trip and service if they find that is not a defect within the Whirlpool perimeters. I could be charged up to $200 for trip and service which is half of what I paid for. Whirlpool states this is not the case, and I am now having to wait a week to even set up yet another appointment. I have other machines that lasted 7-10 years until they wore out. I am frustrated and what could be a simple fix has turned into a financial nightmare.

We purchase Whirlpool fridge less than a year ago. Its still under guaranteed. 2 months ago we notice the fridge part heating up and food was going off. I went back to the shop where we purchase the fridge. They said we had to contact Whirlpool direct so we did had to wait 3 weeks for someone to come and look at it. Fridge is not repairable. Fella who came out did not report back to Whirlpool. I was waiting and waiting to hear word. I rang to see what was the story on it and eventually they said O we will exchanged your fridge and we will ring you on delivery date. Now Im over 2 month waiting on a fridge. Whirlpool is a joke. The company should be put out of business for what they do to honest people buying their stuff, and people who are in the same boat as me should go to the high court and sue them for all the stress they put people through. Shame on you Whirlpool. Disgrace.

Dishwasher is 15 years old and still going strong. Minor leak which disappeared when I cleaned the gasket. Good internal arrangement for fitting dishes & silverware. One of the best appliances I ever got!

I live in Florida and in December 2012, purchased a Whirlpool upright freezer from my local Badcocks. About two months after the purchase it started making this weird loud sound. I contacted Whirlpool and they sent a local appliance company technician out to check it. The technician ripped my brand new Linoleum floor when pulling out the freezer. The result was, in his opinion, nothing was wrong with it, that the loud sound was normal. As it continued, another tech came out and his opinion was it needed a new compressor. So, it was replaced and lasted about a month. I was getting something out for dinner and noticed everything in my freezer was unthawed... all that money wasted a freezer full of food gone. So, Whirlpool once again sent the same appliance company out but a different technician. This one said it that he needed to order parts which he did, a different tech came out to install the parts and told us he didnt know what they were for and our freezer didnt need the parts the previous tech ordered. So this tech put dye in the lines and left. The dye leaked out from under my freezer all over the floor which is now stained because of the dye that leaked. This is the brand new floor they had already ripped during the first service call. So, now not only is my floor ripped but stained as well.Once again, about a month later, I find my freezer full of meat unthawed a third time. Once again I called and find out they have dropped the contract with the company that came out the first two times. So they refer me to another local appliance repair, and this new tech says that it needs a new compressor. This will be the second new one in less than 6 months. They order that part and repair the freezer; this fix lasted for about three months this time. On my fourth call to Whirlpool, I expressed my frustration with losing my food and the hassle of an inferior product purchased brand new under warranty. I definitely was not satisfied with the service and the customer service representative could not find my warranty record. He was also very rude and when he finally found my record, he told me I was no longer under Whirlpool warranty. This was wrong as I have my paperwork showing date of purchase AND the four-year extended warranty we purchased as well. I asked him what they would do for me since their inferior appliance and incompetent repair technicians cost me hundreds of dollars of ruined meat and other frozen food. He said they would do nothing except have another repair tech come out. Until the freezer is determined to be unrepairable that is all they can do.So I scheduled the tech to come out the fourth time and he found that some untrained tech had put oil in the line and the lines and compressor has to be replaced and flushed. I have already not had a freezer for a week waiting for tech to come out and now the parts are put on back order for another three weeks. The fourth repair tech called Whirlpool from my home, while I was standing there, and told them that it basically is beyond repair because of the price of parts and labor. He told Whirlpool it would be cheaper to replace the freezer but Whirlpool told the tech to replace the lines and compressor and flush everything out. So three weeks later, he comes back out on 10/13/2013 to make the repairs. I bought this freezer in December 2012 for $1200 and have been dealing with issues on and off since Feb. 2013 and now its 11/29/13 and once again my freezer has stopped working. I have lost all my food because Whirlpool sold me a defective appliance and would not make it right. I have asked them to replace it and they wouldnt. My husband and I have just purchased our second house and we were very excited about the remodel coming up in the kitchen. We were going to purchase stainless steel Whirlpool appliances, but after this company has treated me so badly, I will not buy anything with the Whirlpool name for our stove, dishwasher, microwave and refrigerator.We probably would have spent about $3500 on appliances, but we will purchase a different brand and give our $3500 to a company that will treat me better as a customer .I used to have trust in this company because it is well known for quality products, but I dont trust them anymore. I will advise any of my loved ones and friends not to purchase any Whirlpool appliance because of the inferior quality and lack of interest in making this situation right. I tried for almost a year and gave them 5 opportunities to do the right thing and now Im done. They dont care about the customer and that is a shame because they have lost a valued customer. As of now I have another tech coming Tuesday b/c my freezer is sitting not running again. Model #EV201NZTQ02.

We saw water all over my wood floor and traced it to the lower freezer unit of my 15-month old refrigerator/freezer. We had to call a repairman which traced the problem to a frozen defrost. He put in a new thermometer at the tune of $200 and now we have to deal with a wood floor problem on top of it. I purchased because Whirlpool was always known to be a quality product. I wont make that mistake again.

Sent an e-mail to Whirlpool. They responded with apology. Sent a second e-mail telling them they should be paying the $300 for circuit board in a two-year-old range. No response. Also, sent e-mail to Geniers. No response. The impression I get is that neither are the least bit interested in the problem. Once they sold the $1260 range, they were done. We will never buy another Whirlpool from any store and we wont buy anything from Geniers in the future.

Bought a standard 18 cubic foot top mount Whirlpool when moving into my first apt. The refrigerator cost a little over $500.00, is spacious and energy efficient. No ice and water in doors and no chip boards for any controls but still working perfectly. It is now 30 years old and never even serviced. When buying appliances get basic, do the job units and nothing with chip boards. They are still sold today and the fridge I have costs less now.

I purchased a Whirlpool Water Heater Model # ND50T122-403 on March 4, 2011 from Lowes. I had it installed by Lowes and it included a 12 YEAR Manufacturers (WHIRLPOOL) WARRANTY, plus I purchased an additional 11 YEAR EPP (Extended Protection Plan) WARRANTY. About 3 weeks ago I had no hot water so I went down to my basement to check the water heater and it displayed 7 single blinks followed by a 3 second pause, which is a flammable vapor sensor lock-out code. I made sure there was no flammable vapor in the area, turned off the gas and pulled out the plug then called Lowes since I have an active warranty with them. They said I had to wait 3 business days for them to call back to set-up an appointment to have it repaired. I waited 3 business days including the weekend and no one called me back by the end of the 3 business days, so I called Lowes back and they set-up an appointment for a video store owner with a plumbing license to come over and try to fix it. Finally I thought I would have hot water after over 2 weeks without it, but the plumber started taking it apart and about an hour later said he needed to order a part and he would be back another day when he gets the part. He came back 2 days later to install the part and fix it, but he could not fix it. He called Whirlpool to report the issue and Whirlpool told him they would not honor the warranty because my basement was not safe. He then told me he would call Lowes to let them know about Whirlpools position and call me back. So when he called me back he said Lowes said the current warranty was under Whirlpool and their warranty was only effective after the initial 12 year manufacturers warranty was up, so they would not help any further. So after only 4 1/2 years with a 12 year manufacturers warranty and an additional 11 year extended protection warranty that I purchased from Lowes, Whirlpool will not honor the warranty that came with this water heater. I am going to take this to small claims court. Whirlpool and Lowes have terrible customer service policies. I will NEVER purchase another Whirlpool product and I will NEVER again shop at Lowes. Please do NOT EVER buy a Whirlpool water heater! TAKE YOUR CLAIM TO SMALL CLAIMS COURT FOR SATISFACTION! Maybe an attorney will put in another class action suit against Whirlpool and/or Lowes.

Purchased a Whirlpool double oven (WGE745COFH) in September 2018. It is now May 2019. After 5 service technicians verified the erratic temperature fluctuations in the ovens, Whirlpool insists that a +25 degree to -25 degree fluctuation in a heating cycle is normal. The motherboard was changed 3 times, and the sensors were changed 3 times, including hard-wiring the last set of sensors. I called Whirlpool and customer service says that is normal. Ever tried baking at a 350 degree setting that fluctuates from 375 degrees down to 312 degrees while trying to maintain a 350 degree setting? I understand there has to be some fluctuation, but either it took a lot of extra time or burned my food consistently. Ridiculous.So, with the help of wonderful people at Lowes (where I purchased the double oven) Whirlpool is refunding my money and Lowes has taken back the slide-in double oven. In my quest to replace it, multiple appliance sellers have told me that all the new ovens having motherboards and sensors have big fluctuations in the oven heating cycles. I find that unacceptable. My husband and other family members have worked daily in an industry where temperatures were critical. They used ovens that could maintain temperature within 5 degrees of set temperature with analog controls. The home consumers are being ripped off with cheap, sub-standard parts making throw away appliances and getting away with it. What do I buy? Havent figured that out yet, but have purchased a countertop toaster oven that bakes beautifully.

Whirlpool has electronic controls allowing exact temperature settings. It is an excellent range and it has a storage drawer under the oven for storage of pots and pans. It also has sealed burners so no gunk gets under the burners.

We remodeled our kitchen and my wife liked Whirlpool, I didnt, but I went with her since she got a good deal with Lowes. We bought a microwave, dishwasher, stove, and fridge. I cant wait till all of it craps out! Going back to Sears! In less than a year I have replaced the stove and stove, the fridge sucks. The fridge already had a defect with a water leak, damaged my hardwood floors!!!! Still waiting on Whirlpool for my floors. The dishwasher never cleans, it always stinks. The stove does not self clean, the handles dont stay tight, shall I go on!

Purchased my Whirlpool gas hot water heater. After 1 1/2 yrs, the blinking light shut off, called tech at Whirlpool, made me move hot water heater to outside. I moved it outside and when called back, I was then told to send 4 photos to prove that I moved it, in which I did that. He told me that still was not right... and still he would not help with reset. I live in my parents old home w/ water heater in bathroom for 50 yrs. No problem... it was vented thru ceiling to attic. Now it is outside, unlit, in a steel hub (as directed) and still not ok...I have no hot water and have not for 4 weeks now... Whirlpool sucks... never buy their hot water heaters. Had to pay a serviceman $750 to move heater, run cold/hot water lines and gas line and it still does not work... with NO HELP from Whirlpool. Now I am in process of buying an electric hot water heater and have to pay an electrician to run a 220... I am on fixed income and this stinks... biggest regret... WHIRLPOOL.

When we remodeled our kitchen after checking a lot of brands of oven we decided to buy the Whirlpool Self Cleaning stove/oven. Loved the look of it. When trying to clean the oven I followed the directions just as its said in the manual. After the cleaning was complete it didnt even look like it clean the oven. I called customer service and they told me I had to clean the oven with a little elbow grease before I put the self cleaning on? Really? I have to clean the self cleaning oven by hand beforehand? Why did I purchase a self cleaning oven then? And because it was just 2 weeks out of warranty they would not help at the 800 number. NEVER NEVER again will I ever purchase Whirlpool! How they treat their customers is disgusting!

We purchased a Whirlpool washer/dryer set 19 months ago and the washer just stopped working. Our trusted fix-it man came out and diagnosed it as a spin bearing problem assuring me it was not anything we had done. He stated it was a defected part or Whirlpool had never put grease in the bearings. A 450.00 part not counting diagnosis and labor. When I called Whirlpool, the first response I got was that they were sorry but we didnt buy the extended warranty, and of course the warranty it had was only a year. I asked to talked to a supervisor and finally she agreed to supply the part, but I was still responsible for the diagnostic and labor fee, which will be a couple of hundreds of dollars! Not happy with Whirlpool and will NEVER buy any product with their name again. Beware consumers!!!

We built a new house less than 2 years ago that included maple hardwood floors and upgraded Whirlpool appliances. The ice maker jams frequently, fresh vegetables freeze despite raising the temperature to 45 degrees and 2 service calls that didnt fix this. The latest problem is the worst. Ice built up in the bottom of the refrigerator and leaked out destroying our solid maple flooring. They are coming out again to service the problem, but who is going to pay for our swollen cupped floors?

Bought a Whirlpool Freezer on bottom in Feb 2012. Its December 2015. Only had gotten a 2-yr warranty. Wished I would have gotten a longer one. About a yr ago the freezer started leaking water all over the bottom of the freezer which turned into a sheet of ice... then leaking water all over the floor. Now there is a knocking/clicking noise coming from the back of it. This product is only 4 yrs old and Im praying it doesnt give out on us. That was an almost $2,000 purchase. I was hoping to at least get 10 yrs out of it. Never buying a Whirlpool Fridge again.

I bought a Whirlpool larder fridge 18 months ago. It suddenly stopped working so we got a service engineer up who said there was no gas. He said it would cost 50.00, but with no guarantee it would work afterwards.

We purchased a Whirlpool dryer about two years ago. Unfortunately I havent had the time to compose a letter stating my dis-satisfaction until now. After much research and haggling we decided on the Whirlpool Cabrio Platinum model, a very efficient (we thought), and even attractive model. It has proven to cost us much more than we bargained for, as EVERY time I do a dark wash, which is usually two to three times a week I must re-wash the items once or twice after! All of the items come out of the wash with white spots all over. Thinking it is soap, I run the wash again on a rinse cycle: nothing changes. Then I redo the wash - this time not using soap. The result is a bit better, but I still have to take a wet washcloth and rub the areas out.I did voice a complaint one time to which I received a letter stating that I should read my manual, specifically the troubleshooting guide. I dont have time for this. Again, we purchased this machine for its cost and efficiency, yet its ending up costing much more than it should as for every load I do (of dark clothes), I have to do one or two additional. (No telling what is on the light or white clothes that I cannot see because of their color!) This machine has been a total waste of time and money; I will never purchase another Whirlpool machine as I am extremely dissatisfied with this product.

Purchased front load washer & dryer 2009 - have had issues with the washer ever since. The last episode has taken 3 visits from repairman - they cant figure out what the problem is - wont finish a cycle (any of them) and locks up. Cant open the door without turning it off and then back on. But the load wont spin dry - leaves clothes wet. Already had the harness replaced a couple of years ago and now they replaced the flywheel (it was warped) thinking that was the problem. Nope. Still wont work & the repair company said they cant figure it out & neither can Whirlpool. Im very angry after reading all of these posts about Whirlpool. Not a happy customer. But what can you do???

We bought our Duet washer in 2007 with a three-year warranty. In 2010, the washer started banging so we called it in for repair. It was determined that the bearing on the drum was bad, so the entire drum assembly was replaced because the poor design of integrating the bearing into the drum. Almost one year to the day, our washer started banging again. The washer is no longer under warranty. We were told the parts are around $400 plus and another $400 for labor.The repairman was from the store we bought the washer and he is a certified Whirlpool repairman. He related to us that this is a very common occurrence for Whirlpool washers because they are using cheap foreign made bearings. He services this problem on a weekly basis and Whirlpool will not do a recall because unless it is a safety hazard, it is not a concern to them if consumers have to pay out the nose for cheaply made parts. This repairman informed us that during training at a Whirlpool class, he learned that on the main board of the washers, they could put a 2 cent lamp that would indicate a bad board which would simplify diagnosis, expedite repair and reduce service time, but Whirlpool wont do it because it isnt cost effective. The repairman told us that we can call customer service until we are blue in the face, but Whirlpool wont give a ** because it is out of warranty. He sees this happen all the time with Whirlpool. My wife called Whirlpool Customer Service just to be told we are ** even though the cheap, crappy bearing that went bad was done under warranty, a year earlier.Well Whirlpool, I guess you lost another customer who will make sure that you lose a lot more customers. We are going to take our business elsewhere and we will make sure all our family, friends, neighbors and coworkers know how bad your customer service and poor attitude is toward consumers. If you cant back your products when you put cheap foreign garbage parts in your product, then you need to lose business and get out of the market.

I purchased a Whirlpool High Efficiency washer and dryer (Model WED4900XWO) from Lowes in March 2013. This washer has performed miserably. I dread each day when I have to use it. The groaning sound is annoying. My husband and I try to leave the house when the washer is being used. We have tried all cycles and combinations of cleaning detergents to get clothes to come out clean. On a regular basis white clothes will come out with spots or discolored to the point the clothes have to be thrown in trash. This is the worst washing machine I have ever used. I will never buy another Whirlpool product.

My new Tridel Condo came with a brand new Whirlpool washer and dryer and the washer has not been working well since the beginning. After several service calls the repairman finally gave up and now were getting a new replacement. However its been a nightmare working with them trying to get this washer replaced. The Whirlpool delivery team and the service team cant seem to coordinate a time together for the replacement. We had to make a first appointment for the service guy to uninstall the old unit, the second appt for the delivery guy to drop off the new unit and pick up the old and a 3rd appt to install the new unit. Each appt has a 4 hour wait window. This is their standard procedure, which is totally inconvenient to customers. To make matter worse, the delivery guy came too early for a condo delivery (before 9 AM) and told us he will be back the next day. And he didnt show up. It looks like now we actually have to have 5 appts (including the 2 missed appts by their delivery guy) to have the washer replaced. All the time I wasted waiting for this delivery is worth more than the washer itself. What would be 4 hours X 5 appts = 20 hours. This is the worst customer experience ever. After 3 months of constantly calling Whirlpool and still no washer. Whirlpool needs to hire some competent people who actually care about servicing their customers.

I have both Whirlpool washer and dryer. These are my second set. Whirlpool is reliable & long running. I love this brand! My dryer is six years old and the washing machine is nine years old. Never a problem and they do about six loads a week.

BEWARE THE TEMP CAN BE 25 degrees off high and 25 deg lower and Whirlpool says that is within specifications. My oven temp was set at 350 and nothing was cooked... After 7 repair calls with their certified repair companies (the 2 worst repair companies that I have ever used) I was told that if you set your oven at 350 that if it stays in between 325 and 375 that Whirlpool claims that it is working fine and will not do anything. I called and talked to customer service and asked the lady that if you set your oven at 350 should it stay within a few degrees of that and she said YES.The people that work at Whirlpool do not even know what kind of junk that their company is selling. I asked to return it and get a more expensive model hoping that it would work better but they said that they sell ovens and do not buy them. Be sure to get in writing from your sales person that your oven will constantly hold the temp within a few degrees. I tried to do the Whirlpool survey but after 11 attempts they said that there was errors in receiving and they did not get it. If you buy Whirlpool then you did not ask the right questions. I WILL NEVER BUY Whirlpool again (unfortunately I have a Whirlpool dishwasher and refrigerator that are not much better) and if you do you will say the same things and be out Thousands like I am.

I had this same refrigerator in another home and had no issues, this particular one now I have nothing but issues with it. It seems that the quality is not consistent. First the ice maker was not working, then the freezer light burned out and now there is extensive frost build up in the freezer. The refrigerator is only 2 years old!

Our 4-year old Whirlpool microwave suddenly stopped heating. We thought that we forgot to push something so we tried again to start it. This time, it started to spark. We bought a new microwave oven and foolishly bought another over the range Whirlpool microwave. This was about 1 1/2 years ago. The second Whirlpool microwave oven stopped heating as well. F7 came up on the controls which meant that the magnetron failed in this second microwave as well. We called Whirlpool and they said they would only repair it if we paid for the repair which would have cost almost as much as a new microwave and maybe more if other parts were involved. Next, last year, 2012, the pump on our Whirlpool dishwasher broke and once again, it was too expensive to repair it. We had to buy another dishwasher so we bought a Maytag, not knowing that they were made by Whirlpool. I guess we will have to wait until that guarantee is up before that also breaks. Also, last year, our Whirlpool washer pump broke and that cost us a few hundred dollars to repair.From the complaints that I am reading from people about their Whirlpool appliances, it is seems that their products are made to last just until the warranties expire. We should start a class action against Whirlpool. On many sites, I have read numerous complaints about Whirlpool products, the majority about the magnetrons in their microwave ovens breaking during and shortly after guarantees run out. They should not be allowed to get away with this. BBB, Consumer Affairs, where are you? To the many of you who have been burned by Whirlpool, I hope you have contacted the BBB and Consumer Affairs and maybe even the Attorney Generals office in your home state.

lD and UL codes are displaying. The UL code displays when the load is even and also displays UL load when I take all clothes out of washer. How could the load be uneven if there are no clothes in? I have had four different issues with this washer. I have started use on this washer in Aug. 2008 and there have been already three major repairs. I am a very dissatisfied customer. I dont know if I should spend more money on washer repairs or just buy a new washer. Please help.

I love this stove! It is nearly perfect. I wish it was easier to clean the glasstop, but I imagine that comes with any glasstop stove. The stove is easy to use, and I love the cooktime option. My only complaint is that the timer is very quiet, and when it is a timer while something is cooking, it only beeps once. If its a timer when nothing is cooking then it will go off repeatedly until you turn off the timer.

The pilot light on our hot water heater will not stay lit. We cant find the custom made Replacement Kit at any local retail locations, including a specialty appliance repair store, Lowe’s or Home Depot. So our only option seems to be waiting for the part to come in the mail. Meanwhile, my two little girls have no hot water in their home! Not because we couldnt afford to pay the gas bill, but because of the piece of junk hot water heater that we purchased and the lousy company that stands behind it!

I bought a Whirlpool washing machine last year. Exactly after one year the bearing problem and noise starts from it. So I do not recommend this machine to anybody because of this bad experience and also high service cost.

Whirlpool Gold Series gas oven with Aqua Lift. Very unhappy with this oven. Cons: Aqua Lift technology doesnt work AT ALL (manual cleaning required); stove top hard to clean; 2 front gas burners are super burners which is fine for boiling water, but too hot for regular cooking. Would be better to have one super burner in the middle or back but two upfront is way too hot for regular cooking, even on lowest setting. Was going to use spray cleaner but cannot on convection ovens. In a bind what to do except scrub with Brillo. Anyone used Brillo?

We purchased a Whirlpool side by side from Lowes and an extended warranty. Immediately maybe a month the ice maker froze. Ice container in the door. Repairman said design is notorious for this problem. This was an ongoing problem. They replaced icemaker and it continued. Finally the warranty people told me it could be deemed a lemon if repaired for the same issue 4 times in a year. They deemed it a LEMON and I received a store credit for the purchase price less the warranty amount. I purchased a new LG French door. No issues and its been 5 years. If you have an extended warranty do some checking on the lemon.

I purchased a Whirlpool Microwave GMH6185XVQ1 on 7/2010 for kitchen remodel. It needed a magnetron repair just after one year warranty ran out. I called Whirlpool and they agreed to repair. Whirlpool sent me an offer for an extended contract. I purchased it. Since microwave was out of warranty at time of contract purchase, I was told there would be a 60-day waiting period. Microwave broke again on 3/2012. I waited until extended contract was in effect. I was told since microwave broke before contract was valid, I would have to pay out of pocket to repair, then contract would be valid after that. It appears (per internet research) these microwaves have bad magnetrons that need frequent repair. I wrote to BBB to complain.

I purchased the Cabrio washer and dryer 4 years ago and had no problems until recently. The motor and the harness broke and the cost to repair was almost as much as a new washer. The repairman told me that this is a common problem with all washers that Whirlpool makes as they have the same motor and harness. He gave me a list of all the brands that they make and suggested if I buy one to get an extended warranty. I would not recommend anyone buy an appliance from a company that continues to manufacture faulty products. I wonder if they own the extended warranty company?

Just bought 4 new whirlpool washers and dryers for my new four plex I am building for clients. Two of them leaked violently along the wall and downstairs. Did I see they were BRAND NEW. Total garbage. Now I have to pay for servicemen to come and fix it. NICE AND THANK YOU for your poor quality commitment. Now my clients are pissed off because they cant move in because whirlpool makes garbage material. So the extra cost it has cost me is totally unthinkable. Whirlpool, ask me if will buy from you again. Thanks for ruining everything due to your inconsiderate quality levels.

I bought a Whirlpool refrigerator almost 10 days ago. They delivered a broken refrigerator and then the technician raised a replacement request. And then started the game of ignorance. Since 10 days I am calling hundreds of Whirlpool persons including Area manager, ware house, customer service, nobody is giving any date when I will be getting it. Moreover, they have stopped taking my call recently. Right now, I am at a loss how can I get a refrigerator or my money back... Last option is consumer forum. I really request you to never buy a Whirlpool refrigerator.

Updated on 02/13/2021: Company fails on customer service. My stove’s trim is rubbing off on my Whirlpool stove only 6 months old. No chemicals were ever used to clean the surface. This trim piece surrounds the controls and is not covered under warranty. An expensive cheaply made stove. Multiple attempts to have the piece replaced got nowhere. A letter sent to the head office was deferred back to customer service. Whirlpool has lost credibility and I will no longer buy their products.Original Review: So disappointed to find the paint finish coming off the trim on my 8 month old Whirlpool range. No harsh cleaning chemicals were used. Only mild dish soap and a microfiber towel. The trim, attached to the control panel on the front of the stove, is not actually stainless steel, but painted to look like stainless steel. Whirlpool warranty doesnt cover esthetics and refused to replace the trim, stating replacement would include the entire control panel and it is not covered under warranty. So be prepared to have your new expensive stove look old in a matter of months.

I purchased a brand new Whirlpool Cabrio washer and dryer set not even 2 years prior. When I first started using it, I pulled shirts out of the wash after being ran through and found deodorant marks still on the inside of the shirts. I had to wash all of my loads on heavy soil and still had to run some loads through more than once. The wash machine quit working about 1 month ago, so I had a service man out to look at it. It ended up being the control panel and the part itself was going to cost me $300 and by the time I paid to have it repaired, the total cost was just under $400. The service man proceeded to tell me that Whirlpool had another company actually make the control panels for the Cabrio model and he has serviced several of these washers and when he would repair one part, another part would stop working. I was very upset and bought a new wash machine. I would like to add, I am a single mom with a 2 1/2 year old, so the wash machine was not used excessively in any way. I dont work outside so my clothes are never soiled heavily. Needless to say, my washer was not under warranty so Whirlpool couldnt do anything for me. A wash machine should last longer than less than 2 years. I would not recommend this model to anyone. And for Whirlpool to put their name on such a poor product is very disappointing since I have had good experiences with their products in the past.

Whirlpool Cabrio - good consumer rating. Ive had it for 2 years. It does not clean well and the clothes does not smell clean even though I often clean the washer and leave the top open when Im not using it. Ive also had it service 3 times because the rotator keeps going off and makes a lot of noise. I bought an LG dishwasher for $1300 and it lasted 7 months and completely broke down less than a year and had to be replaced. After I bought a $400 Whirlpool. It does the same job and Ive had it for 2 years without any repairs.

This is the loudest washing machine I have ever had. Sounds like it is grinding. Called Whirlpool and said that is normal. Will never buy another one and will let everyone I know how noisy it is and not buy one.

Bought this brand new 5 door fridge, not even 2 years ago and had nothing but problems. Computer went 2 times. Rail broke for the drawer in freezer. Freezing up in freezer. Switch on freezer drawer went out. I will never buy anything else from Whirlpool again. So much for the nice looking things.

I bought a Cabrio from Costo less than 2 years ago. Dryer so far so good (big barrel with hair dryer so what could go wrong?). Washing machine is HORRIBLE. Lid latch broke (couple hundred to repair). Now out of the blue I get an F2 error & machine is completely inoperable. I am only user & very careful with it. There should be a recall on this expensive junk. NEVER buy Cabrio or maybe any Whirlpool appliances again. Ive never written a bad review btw.

We purchased our washer approximately six months ago. It is an energy-efficient top loader without a central agitator. If I wanted a washer just for lingerie then I would be satisfied. But I need a washer that will clean farm clothes. My husband works hard and his clothes show it. This washer does not clean them. I even tried putting very few items in at a time. They still arent clean. I have to take my heavily soiled laundry to the laundromat. My other main complaint is the baffling feature of a lock mode. I spend countless minutes standing by my washer waiting for it to unlock so I can toss in an extra item or add fabric softener, etc. When we removed the latch, the washer didnt work at all. Replaced the item at a cost of $40. Infuriating!

Whirlpool Cabrio top loader washer - I am writing to really complain about a washer I bought there at Metro. The people were great BUT this washer has been a REAL DISAPPOINTMENT!!! It is only 4 years old and I have had to have them come and replace the top of the machine. It has rusted around where you put the bleach, the soap. It leaks underneath the machine, its rusting on the bottom of the machine horribly. SO DISAPPOINTED!!! We bought all WHIRLPOOL products - washer and dryer, stove, microwave, dishwasher.What is it with these things? They rust so easy. I had a washer before this one for 14 years and it never did this. I guess things are not made with the same quality as years ago, but I will not ever spend my hard earned money on WHIRLPOOL AGAIN!!! I guess I will have to put up with this machine till I can afford to buy something else. VERY DISAPPOINTED CUSTOMER!!!

We purchased a Whirlpool Gold self-cleaning oven three months ago and have had nothing but problems with it. First of all, the new aqua clean system is a joke. I ended up scouring the inside with cleanser and a scouring pad for over 30 minutes to get all the baked-on food that the aqua clean system did not get off. Now Im not wanting to use the oven to cook anything that splatters. Secondly, the oven does not cook when using the convection mode. I thought convection was suppose to cook quicker but in my case, I have to cook the food longer. Thirdly, the bulb burnt out in the oven after only three months. Im glad we are trying to sell the house because I could not live with all the problems very much longer.

I paid a lot of money for this because I thought it would be high quality and last for quite a while without problems. First of all, you HAVE to open the right door before the left door and then remember to ALWAYS close the left door first and then the right door. If you dont the doors dont close well and your refrigerator gets hot AND THERE IS NO BUZZER OR ALARM TO TELL YOU THE DOORS ARENT CLOSED. After 2 years the freezer repeatedly freezes up and then the refrigerator heats up. My repairman says the controls on this refrigerator are WAY odd and instead of just buying an inexpensive part (defrost timer for example for $50) he need to order the entire control for probably 3 time more. NOT WORTH THE MONEY OR TROUBLE. BUY ANYTHING OTHER THAN WHIRLPOOL GOLD.

We bought a Whirlpool freezer-bottom 18.5 cu ft. fridge from Lowes. The compressor broke in less than three months of regular use. I called Whirlpool who sent A&E to check it out. The technician didnt even file a report and lied to me about what was wrong with the fridge. They sent a different company to come look at it and they confirmed that the compressor is broken. I called Whirlpool customer service and was told that the warranty only covers repairs not replacement even though I paid over $1,000 for a defective product. The excuse: Its a man-made product so we cant guarantee it! So what used to be a 3-5 year warranty not too long ago is now what? A one-year warranty is virtually useless. I can see a future not too far off where there is no warranty at all. Where is the protection for the buyer? If I wanted to purchase a second-hand fridge, I would have. I will never buy Whirlpool again.

My Whirlpool washing machine has not worked properly from the first day. Whirlpool washing machine customer care is pathetic. I bought a Whirlpool semi-automatic washing machine, Sparkle. This product is in warranty period. From the first day, this product did not give right result. Machine sound is very high and I called customer care center may times (around 9-10 times). They sent this machine three times in service center but the results remained the same. The problem arose when we put some load in it. He said the gear box should be changed and the machine should be cleansed off the dirt. He offered some powder costing Rs. 1500/- to be used in washing machine.Later, he asked Rs. 350/- for other parts after two months then I paid them again after 15 days for a piece that did not work. Then, they want to charge me Rs. 350/- again. When I showed the previous slip, they then changed that part without any cost. But after 15 days, again same problem occurred. They charged me 150/- Rs. but the problem is the same. Total money I spent is Rs. 1500/-+350/-+150/-. I also purchased a stand and cover for safety, but what will happen if product is not good? The technicians visited many times and they all said this piece is not okay but they cant do anything. The company should change this product. The machine is still rotting at my home. Im not sure if it could be accepted to be exchanged for a new one. Customer care gave us the satisfaction code but technician did not ask for this code. Im really very sad that I have called around 10 complaints within two years. Why are you people not listening? You all are doing time pass. You can check my complaint codes in your records and ask your technicians about Noida. Many times, I did not note the complaints number. Please open my file and check the issue. I told the technician many times that I want to talk to your seniors and want to tell them the problem because from the first day, it was the same, but they refused. I have also purchased a 320 LT fridge from you but that product is very nice. You should listen to our problems. This was not expected of such a branded company. I promised myself that I will never in my life purchase a Whirlpool product and advise the same to others.

I bought the #1 rated Consumer Reports recommended Whirlpool Gold fridge 15 months ago (how convenient their warranty stops at 12 months). The control board has already gone out, lots of ruined food and ruined perception that Whirlpool made good products. I will avoid buying anything they make again. When repairman was taking it apart, I saw Made in China stickers.

I bought this appliance 9 months ago and it has broke 4 times now for the exact same reason. I have set aside 6 separate 4 hour windows for Diamond Factory service to come repair it. All four times, it has been repaired improperly or diagnosed as “nothing wrong with it”. My refrigerator constantly runs, eventually forms an ice wall of back of freezer, and then eventually ice gets so thick to where it stops regulating temperature. All four times, I have had to throw away all my food, defrost the fridge on my brand new hardword floors, and take off work so I can be home for these 4 hour window “service repairs”. They refuse to replace the appliance. UNBELIEVABLE. Never purchasing from Whirlpool or Home Depot in Sunset Hills again.

12 months and 2 weeks, my ice maker quit working. I called Lowes where I purchased this top of the line junk. The first thing they asked was do I purchase the extended warranty. I said no. He advised to call a repairman he recommended, but I would have to pay for the repairs. Whirlpool was just as bad; no warranty, you pay. It appears they are both relying on warranties rather than selling dependable products or customer satisfaction. A couple months later, ice forming on the bottom of the freezer, and puddles every couple of days in front of the refrigerator. I pulled the two draws out and removed the ice. Within a week, it was back. A $2400 refrigerator should last longer then a 1 1/2 years without falling apart. My Whirlpool dishwashers only lasted 1 1/2 years also.

Bought expensive fridge 2009. Now (2015) random very loud rat-tat-tat sounds lasting 5-10 seconds. Very loud. Paid for repairman to evaluate. He said it was probably compressor spring and other springs would probably soon break and would shut down fridge. Said it is very expensive to repair and it would be best to dump the fridge and buy a new one. I called the 800 number located inside the fridge. Jacob at Whirlpool listened to my story and said, Yep, it sounds like the compressor spring and the other springs will likely break. He said he can make me a one-time offer of a full repair of the compressor for only $359.65. We pay Whirlpool and they will have a local guy here come and fix it. We paid by visa.And, via email we get a document that shows we just bought a service contract. This is a surprise to us as we were told were paying to have the compressor repaired. In a few days, a call comes from local repair shop. Guy says, he will come out and check out the noise and see if he can repair our unit. We tell him the noise is intermittent and we cant predict when the noise will occur. We also tell him Jacob from Whirlpool said it was the compressor and that we paid to have it repaired. He says it doesnt sound like it is the compressor and that he cant diagnose the problem if he cant hear the noise. We tell Maytag/Whirlpool via phone we are faxing formal request for refund of our $359.65. Lady from Whirlpool says we, should get a refund in 4-6 weeks. Well, we will see.We are very disappointed in the the short life of our very expensive fridge and we are disgusted with the false and misleading comments made by Jacob of Whirlpool. He told us we were paying for the repair of our compressor and instead we get a stupid service contract. We are in the process of buying a new fridge. And no... It will NOT be a Maytag/Whirlpool!

Whirlpool Water Heater Purchased at Lowes - Like all the others I see on here. I Purchased a Whirlpool water heater at Lowes Model# BFG1H4040T3NOV. Pilot will not stay lit; customer service tells me to replace the thermocouple which did not solve my problem. This is the second time in 2 years same problem. First time it was fixed under warranty but now since it was replaced once it is not eligible for replacement so I now must decide if I want to pay someone to figure out the problem and I must pay to repair it or what I am starting to think is that I will likely junk it and buy a quality unit and be done with the games and run around and just have hot water, which is all I really want. I will never buy another Whirlpool product in my life and will encourage everyone I know to do the same.

Bought the top of the line Whirlpool Cabrio washer and dryer. Washing machine lasted 3 years. Took forever to do a load and would not be clean after taking an hour to wash. The dryer is still going, but would not surprise me if it died any day. Do not buy.

I have spent more money in the last year to fix this piece of crap. So very disappointed!!! I have lost $$ of food because fridge does not cool.. Ice maker is a joke... I am going to call someone out for the 4th time... Costing me a fortune... Very disgusted with this product.

I have a Cabrio washer displaying the F-1 error code. I called on Thursday, the 15th of Sept. I spoke to Vicky in the Cleveland, TN division. She told me that the F-1 code on my machine (model no. WTW6600SW2 and serial no. **) was covered under a recall at no cost, parts or labor (I specifically asked this question). She set up a service repair ticket with Freds Appliance at 888-453-7337 and gave me the date. I was home waiting when they called. The driver drove in the drive and asked if he was there for my Jenn-Air cook top! I said no, the F-1 error code on the washer. He explained that he had just used the last control board last week and he changes them frequently. I called Whirlpool. A very snotty Ashley proceeded to tell me that nothing was covered and I would have to pay. I asked for a supervisor and Ratna answered after a hold of 45 minutes on my cell. I explained the situation. After begging, she proceeded to tell me that she would pay for parts only. I explained that the tech did not have the parts, didnt even know the correct appliance, and now I have to take another day off work to meet him to have my washer fixed. I have not used the washer in two weeks. I used to only buy Whirlpool products. After reading all the complaints about the same error code from other consumers, I believe there are enough complaints that we as consumers should be protected.

Bought a new Cabrio, worked ok but in less than 2 yrs the bearing is bad. It will cost almost as much to repair as a new washer. Will never buy a Whirlpool product again. Would give negative rate!

I purchased a Whirlpool duet front load washer on 21 Apr 10 and it has experienced a major failure. It needs a new rear tub and basket, and the parts alone costs $700. The machine is barely four months out of warranty. After a lengthy conversation with a Whirlpool customer service representative, I was told that without an extended warranty, they were very sorry and there was nothing that they could do for me.

My double oven is only 6 years old - it stopped working on xmas day, had a repair man look at it. He has phoned Whirlpool and has not had his calls returned to buy the part needed. Why is this. I need my oven, why is Whirlpool making it so hard for me to have it repaired.

My issue is I believe that Whirlpool should pay for my tub and bearing part because the washing is only 16 months old. Because it went over the one-year warranty by four months, I shouldnt have to buy this part considering it is such a big break for such a young washer. Please advise if Whirlpool will assist me with this issue.

I hate the thing. The grates are way too large, they are too heavy, and the fact the high is not a true high and the other three are different temperatures. The oven is awful. It half cooks. You cannot do decent canning on the thing because you only have one burner. This is a mess from the get go. Why in the hell do companies think everything has to have a computer attached to it? Computers and heat do NOT mix for Gods sake. A simple gas stove is sufficient to cook with. Take the computerized junk off and make a normal stove.

We have had a Whirlpool Refrigerator since 2004. We have only had minor issues with the ice maker within the last 3 years. We have had no major problems with this refrigerator. The other minor problems have been the quality of the drawers. After 15 years the plastic started to crack on them.

We recently bought a Whirlpool front loader even though the reviews kept mentioning mold and odors. I discovered that there was a water buildup in the soap dispenser so after every load, I remove, clean and dry the soap dispenser. The machine does a great job on cleaning clothes and I am following other suggestions on cleaning the drum from time to time. By the way, I bought my machine at Lowes from the scratch and dent department and with a little negotiating, I paid half price! Good deal and so far, good machine. Good luck and remember to remove and empty the water from the soap dispenser!

I bought in 2008 a Whirlpool Cabrio washer because it was the best. It cost me $900 plus 170 extended warranty for four years.This month, my washer showed an f1 code. I call the Maytag store and guess what, they are not there anymore. They closed the store. I called for my extended warranty and guess what, they are not with Maytag and they filed a chapter 7. So, I spent over $1000 in a machine that only worked three years and now I have to buy another just because no one wants to take the responsibility on the warranty. I have to pay another $300 to fix the problem and even doing that, theres no guarantee that it wont fail again. So, and this is to the people of Maytag and their cheats, you may take my money but you lose me as a customer forever. Thank you for nothing. I will keep that in mind next week when Ill be in the store buying another washer.

whirlpool Cabrio Washer - I replaced my front loading Duet with this, thinking I was done with front loader. Designs are set to fail, liked the idea of no agitator, thinking can clean a lot clothes at once, boy was I wrong, heavy loads wont spin dry, forget sheets or blankets. The machine just stops, leaving everything soaked and you basically screwed, you can invoke a spin cycle but to help make rinse and spin out, sooo disappointed. Whats wrong with the designers of this product? They didnt try sheets to see if it would even work. I am far from over loading this too. Dont buy this.

We bought a new Whirlpool refrigerator about three years ago. Because of space, we had to purchase one with a top freezer and also with no ice maker. First of all we didnt realize it was much deeper than our old Kenmore so it stuck out further into the kitchen space. That was not that big of an issue. At first everything ran great including the top freezer compartment, or so we thought. Then we noticed that when we had ice cream in the freezer and put water in ice cube trays to freeze, the ice cream would get very very soft. This continued to the point that now anytime I put water in there to freeze ice cubes I have to turn up the temperature to keep the ice cream frozen. Once the ice cubes are froze, there is no problem, but they take at least six hours to freeze. Then one day when a young child slammed the refrigerator door closed, the freezer door popped open about an eighth of an inch and then closed again. So, I tried it. Anytime you close the refrigerator door a little too hard the freezer door pops open. I then tried the dollar bill test to check the strength of the seal. The bill pulled right out of the door with very little effort. So, is the problem bad seals, bad design, or bad quality control, or what. How can I be assured that the frozen foods in the freezer are being frozen as solid as they should be. I know they dont freeze solid enough in the freezer door. I will eventually dump this refrigerator and go get another Frigidaire. If we have to get one with a bottom freezer, we will just have to rearrange our kitchen to accommodate it. But, having to turn the temp up and down every day is ridiculous. I have had issues with food close to the walls in all refrigerators slightly freeze, but never had an issue with keeping things cold enough. I will never buy another Whirlpool refrigerator, stove, or anything else for that matter. I have always had good luck with Frigidaire, so I will stick with what I know works.

I love my dishwasher, have had no problems and it does a great job. Stainless steel interior is a plus. Give it a try, you will be satisfied with the performance.

We have a small space that fit a washing machine and figured we could add a dryer on top but didn't have an outside vent, so took a chance in this model. It fit perfectly in the space and saves us from a regular trip to the laundromat. It takes a bit longer to dry but is energy efficient.

I purchased a dishwasher from Menards. It was a top of the line Whirlpool Dishwasher. We ordered new cabinets for a kitchen upgrade and when the cabinets arrived they were damaged during Thanksgiving holiday. We purchased the dishwasher and it sat in our garage until the second set of cabinets arrived in mid January.Once the GC installed the new cabinets we noticed a small dent in the front of the stainless steel dishwasher. I notified Whirlpool and they took my model and serial number. The supervisor April said there is nothing that I can do. You passed the 30 day cosmetic warranty. I explained the issue to her and she didnt seem to care.The dishwasher sat in the garage for 7-8 weeks. This is not the consumers fault. This company could of sent a service mechanic out and replaced the front panel. But she chose to ready some meaningless policy to me. I will never buy a Whirlpool product again, and I will tell everyone about the poor and unprofessional service that Whirlpool offers.

Purchased Whirlpool dishwasher and range approximately 16 months ago. Dishwasher must stop in middle of rinse cycle because the dishes always feel filmy and there is an inch or two of water in bottom. Must be bailed out by hand. Piece of garbage. Called Whirlpool and they can get us a service man from 8-4 (who waits an entire day these days) on New Years Eve. Next appointment is following week to examine and will fix (if it is their fault and for a fee). The last two dishwashers I purchased lasted 10 and 7 years respectively. Stay away if you dont want bad equipment, uncooperative service, and aggravation. Range I bought was OK but the oven temperature is always off 10-15 degrees from what it says it is. I honestly wanted to buy American but I feel cheated. Next time Ill try Samsung and see if they give a damn.

Very unreliable oven. Oven temperature never seems to get to the proper setting. Do not buy any Whirlpool appliance. They do not stand behind their product. A stove should be relatively simple but Whirlpool managed to produce a product that is complicated & unreliable.

19 gallon Electric Whirlpool water heater Model #e1f20us015v - Purchased this water heater from Lowes to provide hot water to small apartment with no kitchen for my son, built in my garage. Had unit professionally installed within 1 foot of bath to provide hot water for shower and sink in bath only. Hot water lasts only 5 to 6 minutes and takes approx. 2 hours to recover. My son cannot even take a normal shower! ntacted Lowes who was unable to help and told me to contact Whirlpool. Contacted Whirlpool after my model number would not even come up on their website. I asked tech what was the normal expected amount of time before hot water depleted. She did not know. I asked what was the normal recovery rate. She did not know. I asked for information on the energy rating. She said there was no information available. I asked how I could receive a refund. She said that they could only send a plumber to check unit and that nothing would be done if it was heating water. I asked to speak with a supervisor. She said none were available and said one would call me. I never received a return call. VERY DISSATISFIED with Whirlpool on this issue. It appears my only recourse is to purchase a new water heater and scrap the present one.

I purchased a Whirlpool French door refrigerator model # gx5fhdxvyo4 in June 2011. Four months ago, ice was forming on the bottom of the freezer. Repair person replaced a clogged plug leading to evaporation tray. Its March 2013 and repair person now has to replace evaporator motor part # W10128551. I contacted Whirlpool and was told the warranty has expired (one year). This repair will be around $175. How can I trust a Whirlpool product in the future?

What a horrible machine! From the day that it was installed not one time it gave me good cleaning. I spent so much money servicing it. Costed me over $700! I am done putting money into it! I am washing by hand! If you want a dishwasher where you can hand wash and God forbid your rinse with the machine (you will have to rewash everything) then this is the machine for you!

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

We purchased a Whirlpool Range from Brands Mart USA and did not try to use it for quite some time because our house was not ready to move in. When we tried to turn on the oven it would not come on. We called a repair service and was told the Motherboard was not working. We realize the warranty was out on the stove but it never worked and the stove is Brand New. We called Whirlpool and they was going to repair and changed their mind on December 18, 2014 at 8:54 am. Before that call we had spent quite a lot of hours on the phone with Whirlpool and Brands Mart USA.. We purchased three appliances from Brands Mart USA Range, Dishwasher and Microwave at the same time they were all Whirlpool products. What happened to Good Customer Service and Return Customers for Job Security? Well neither Company care for their customers. We did not break a motherboard for a stove oven because the range was never turned on because it was broken when purchased.. We are unable to get any help from either company. I talked today to ** & Supervisor ** from-Whirlpool and ** - Brands Mart USA, again no help. Why transfer you from one company to another for 1 hour and 45 minutes? WISH I COULD GET SOME HELP. And we wonder why companies go out of business - word of mouth complaints and especially with Senior Citizens like us.

Purchased this dishwasher in 2015. It has been horrible. The unit has never cleaned sufficiently on any cycle. I run the unit in the evening for the full cycle with heat. It takes almost 4 hours. The dishes are still soaking wet the next morning. We would be considered light use as a family of two. I hand wash any larger pans or cookware as the racks do not support anything of midrange weight or above.With the poor cleaning, I purchased a additional silverware rack and placed it more centrally to attempt better cleaning. It remains mediocre at best. The most recent irritation is the door latch has started pulling free from the unit and remains attached to the door! I have to take pliers and remove it from the door and reaffix it into the housing of the unit. Will never recommend this nor will I ever purchase anything from this company in the future. Sad to see the quality falter to the point of absolute failure.

I purchased the Whirlpool Gold OTC microwave model #GMH6185XVQ on November 29, 2010, and it was installed on December 26, 2010. After 18 months, the Magnatron went out. Its just me and my husband, and we eat out most of the time. So, it wasnt used a lot. I called Whirlpool, and Sherrie could only say that she feels my frustration. No, she doesnt. She has no idea. I just purchased $4000 worth of Whirlpool appliances, and now, I have no idea if they are going to last. It is a piece of junk that I paid good money for. In this day and time, we have to watch what we spend. I think Whirlpool should be a stand-up company and admit to taking our hard-earned money for a piece of junk. Dont they realize that its going to hurt their business.

Reading the many reviews of malfunctioning washers and other appliances, I wonder why organizations like Consumer Affairs and Consumer Reports do NOT help the many cheated customers form a class action lawsuit or boycott or some other means to effectively organize and force manufacturers to return the full cost of purchase, taxes, shipping, moving and repairs for 5 years for every product. The manufacturer have NO consequences for selling shoddy, malfunctioning but terribly expensive products. We are all being taken for fools by the corporations.I was stupidly brand loyal and bought a Whirlpool Duet front-load washer and dryer because we had to leave our perfectly good 28-yr-old Whirlpool washer when we sold our house. The first set of instruction is to pull the electric cord from a small hole in the back of the washer. No amount of pulling would budge the cord. Finally yanked with all my strength, heard a snapping sound and 12 of cord came out. Then no more pulling, yanking or tugging would produce another inch of cord. So I took off the top of the machine and found the cord tightly wedged in the fork of a plastic thing that looked like part of a stabilizer for the drum.A similar plastic thing on the other side was broken at the fork, the snapping sound I heard. Freed the cord with lots of effort, but it was still firmly stuck way down inside. Removed the back of the machine, found the cord stuck inside a circular thing with one tiny opening. Took lots of time and effort to free the cord from that, but it was still stuck. Finally managed to reach the plug, which was firmly anchored to the bottom of the frame with an orange lanyard. Cut the lanyard with a knife to finally free the cord. This had to be an act of sabotage by an assembly worker, as no way could the cord accidentally jam itself into 3 different places too small for the cord to slip in, and it certainly didnt tie itself to the bottom of the frame with a lanyard.The hour it took to free the cord was just the start of troubles with this machine. It did start and kind of tumbled clothes in an odd fashion, but when it went into spin cycle, it literally jumped all around the room, almost jumping out the door. The whole house shook and I feared the floor would collapse. That machine must weigh well over 100 lbs. even without water and clothes. Next load I tried delicate cycle which had a slow spin cycle.Same result, even worse. I had to wedge my body in the 10 space between washer and dryer and press down with all my 170 lbs. to keep the machine from doing serious damage to the dryer, walls and floor. I contacted seller, Lowes, and they said call Whirlpool. So I did, but no response. Before buying that machine, I read many horrible reviews of Whirlpool Duet machines, but I have only owned 2 washers since 1967, both Whirlpools, so I had strong but stupid brand loyalty.

Have a Whirlpool side by side about a year and a half old. Fridge started getting warm, so when I contacted the Whirlpool co, they informed me and sold me a year warranty to cover what the problem is and anything that would go wrong in the next year. The warranty is through Assurant. After contacting them, I found out they could not have a repairman out for another week. Wasnt happy, but nothing I could do. They found out the compressor was bad, ordered the part which showed up the next day, but could not come out to install it for another week. Getting more upset. Put it in and my fridge was hotter than before. Called and they could not have anyone out for (you got it) another week. The new compressor was bad. Ordered a second one, came the next day, and they put a rush on the repair so I only had to wait 4 days this time. Guess what, it still does not work. Had to wait another 4 days for someone to come out. So tomorrow is the day. We shall see will it be another compressor and another week to put it in? I never heard of any company stretching a repair over a months time. I am so angry with Whirlpool, Assurant and A&E repair company; you just dont know. I would not recommend buying or going through these companies. This is very unprofessional.

I bought a Whirlpool over the stove microwave. It was to replace a GE that was over nine years old. 40 days after purchase and installation the plastic started chipping and peeling. I contacted Whirlpool customer service and was told that it was a cosmetic problem and my warranty stated that I had thirty days of warranty on cosmetic problems. This was a problem because chipping and cracking didnt happen within 30 days. The chipping and cracking continued to get worse. I again called customer service because the warranty stated that workmanship and bad parts were covered up to one year. I was told that because it was over my stove that this was to be expected. I thought this was a dumb answer because had I known that an over the stove microwave would have problems from cooking I would have installed it in my living room over the television. I called customer service several times. One of the times I called I talked to a representative who actually acted as if she wanted to help me. She suggested sending an e-mail with pictures and gave me an e-mail address. I did this and got no response. I was getting close to the warranty expiration date. I called again and was told that pictures wouldnt work; I would have to pay to have a serviceman come out and write a statement saying that it was not cosmetic. The cracking and chipping is so bad that I cant clean parts of the door because the cloth or sponges catch on the cracks. The door on the GE microwave did not look as bad after nine years of use as the Whirlpool does after 1 year and 8 days of use. I am not the smartest person in the world but I know the difference between poor quality material and workmanship as opposed to cosmetic problems. Im pretty sure that if my wife put her makeup on and pieces of her face started cracking and falling off she wouldnt want to hear that it is not a real problem its only cosmetic. Bottom line is I am very dissatisfied with the poor customer service and warranty problems I have experienced. I will not buy another Whirlpool product and would strongly suggest to others to buy any brand but Whirlpool.

We purchased a Whirlpool refrigerator (Model WRB322DMBM00) in April of 2015 from Lowes. Within 5 months rust stains started to form at the bottom of the top door and the top of bottom drawer. RUST STAINS!!! We do not live in a humid area or near the ocean. It is a design flaw I believe in the gaskets. I called Lowes first for their guarantee but they said it was cosmetic and not covered. Then I call WP customer service and they are sending new doors. Thats fine but its going to happen again. I requested slate instead of stainless steel but they wouldnt do it. Plus finger proof is a joke (monochromatic). Very dissatisfied customer.

Purchased on Nov 2010 at Lowes. Washer machine sounds like an airplane on the wash and worst on the spin cycles. Bearings are gone!! Customer service was no help. Basically was told I was ** out of luck. Have service bulletin addressing this issue, yet they refused to help. $1300 learning experience about Whirlpool. Social media here we come. Goal: to keep at least 1 million customers away from their scrap!!