Whirlpool electric range oven wont turn off. Used the oven 2 or so times per year.... Very unsafe, expecting internal breaker that would shut the thing down. Whirlpool Range/Oven PT3196685 happened on 6-10-2014, was baking cookies with timer on for 9 min. First batch turn out good, 2nd batch on fire before even get to 6 min, the burner is brightly hot and cant shut off from the panel... Saw ERR then COOL indicator... Tried but no respond from panel. The burner element wont turn off and temp keep rising white hot... The only way to shutoff is the house circuit breaker. But soon you turn on the breaker, the oven would turn on by itself and you cant switch it off. Where is the safety breaker on these range/oven when something goes beyond 500 degree..... UNSAFE PRODUCT. Ordered a new Whirlpool Gold 700 series but canceled after discovered others experienced similar situation with the new product. Could have burn down the house and worst when lives involved. WONDER IF ANYTHING WAS DONE TO CORRECT THESE SAFETY ISSUE.

I have Whirlpool Washing Machine bought at end of 2012. In 2014, I faced an issue where the washing machine board ics are gone. The services people came and check the replaced a board. It was cost me 6000 Rupees including the service cost. Very next year 2015, again the same issue. Board of the washing machine gone. Now I have to change the board. It seems it may cost more than previous one.I heard that these service engineers are taking the previous my board / replaced board. They are repairing it and sold it again and again so the quality of the board is question mark. As a customer I / we cannot spend money and change board every year. I just want everyone to think twice before you go to Whirlpool Washing Machine & its products. I had a same kind of poor quality issue with even water purifier too. Consequences - I have spent Rs. 10000 already, it is loss for me beside the buying cost of the products.

After only two and a half years, my Whirlpool bottom freezer refrigerator (GB2SHDXTQ0) was frosting over and the top food section stopped working altogether. I made a call to Lowe’s. It’s not their problem. I then called Whirlpool and he said I had a bad gasket. I had a 28-year-old refrigerator that was still working with the original gasket and it has no problem. After reading all the complaints with Whirlpool, I would never buy another one again. After cleaning out the refrigerator and freezer two times, carrying things to a friend’s house and having to pay $90 service calls just to walk into the door, I am ready to throw this one out. This refrigerator cost me $1200 and I am a single person living on $900 a month. Thanks for nothing, Whirlpool. There should be a class action suit.

My Brother-In-Law bought a Whirlpool Gas Water Heater from Lowes last year. The Water Heater was still under warranty and would not stay lit. He called Whirlpool and they told him to send them a picture of where the water heater was installed (really? a picture). They told him he could not order the replacement part which was a Thermopile because he had to have a licensed person install it? Really? In your own home? My husband finally got Lowes to order the part because Whirlpools only help was for him to purchase a new water heater and Lowes would give him 10% off a new one. Lowes and Whirlpool have a monopoly on water heaters. Whirlpool is the only brand that Lowes sells. So if you want your warranty to be good on a water heater DO NOT BUY WHIRLPOOL.

Let me just start by saying I have multiple Whirlpool appliances, and I have always bought Whirlpool appliances in the past. I bought a refrigerator 3 months ago, and it quit working. So, I called Whirlpool to come service it. The service repairman said someone left the freezer door open and it froze up. Two days later, I had to call them back again, because now, the fridge part was not keeping food cold. He came back out and told me it was the compressor. I then in return called Whirlpool that afternoon, and they refused to replace it saying they had to follow their Warranty Policy and they would call me back on Wednesday. They did call back on Wednesday and told me they had located the part. I got a call on Tuesday of the following week and was informed they could not locate the part. I called Whirlpool the next day, and they told me they would have to send it to their Exchange department for review and I would hear back from them in 3 business days. I asked for them to rush my request, but they told they have no way of doing that. I will never buy a Whirlpool product again!

Whirlpool Refrigerator WRF736sdam13. Purchased from Lowe’s June 2015... freezing started in April 2019. Freezer bottom is not draining correctly and the bottom keeps freezing making it difficult to push door close. I have the extended warranty. This will be the 5th time on Monday, July 29 repair person will come out.I talked to Whirlpool and Lowe’s. The product cannot be considered a lemon because the problem continues to be “fixable” as stated from answering service when I reported the problem again. Customer service has been amazing up to this point. Anyone else have an issue with this model with the bottom freezing solid? Any suggestions?

Bought my 5 door refrigerator from Lowes in December 2016. Was delivered in January. Had a dent in the door so another new one was ordered that arrived in late January. From day one the dual ice makers have not made enough ice for our family. I called Lowes to have it checked out thru warranty. The repairman came out and said Its making ice. I cant fix something that is not broke. He suggest I buy a under the counter ice maker. What the heck! I pay over $3000.00 For dual ice makers and still dont have enough ice to supply my family. Cant believe Whirlpool puts out a dual ice maker in a refrigerator and it cant even supply a family of 5. The repairman said a normal family size is 3. I dont know where he came from but to me thats not normal. He was from Tutor Appliance Repair and was very rude until he realized he pissed me off then he blamed it on Whirlpool. The refrigerator is beautiful but Id rather have my old one. It made more ice than this new one does. Will I buy whirlpool again? No I wouldnt. If they cant stand behind their product and what its suppose to do then I dont need it. Bad thing I have to deal with this one for a while until I can purchase a new and better one. If you have this refrigerator dont plan on having guest or family dinners it will not hold up for ice tea. Not to mention after dinner drinks. Model # WRV986FDEM01. SeriAL # K63817128.

My stove is good, I have gone through 2 refrigerators in less than 8 years and the replacement is having issues. Service is a joke, customer service is questionable but trying to assist but at this point will not recommend whirlpool products.

We purchased the washing machine on February 2, 2013 and initially noticed that some of the clothes were still dry when the complete load was over. Meaning that I am not saving water cost because I then have to rewash the clothes and pre-scrub the clothes. Then a little over a year later, the machine is making this extremely loud piercing noise when spinning. The cost to replace the part is $250.00+ the repairmans fee. Whirlpool says there is nothing they will do. From reading the other reviews, this is really sad because of the numerous people having the same issueS with a capital S. I definitely would support a class action suit.

We purchased a Whirlpool washer model WTW7500 in November of 2017. I found the clothes were not getting clean and also noticed that even after a full wash some parts of the clothing or sheets had dry spots! I checked all connections and called for service. As soon as the serviceman saw the machine he said, “yes, that’s a problem with those machines”. They are low water/water saving as per some American regulation and that’s what happens... you’re going to have to live with it. He also suggested running an extra rinse and using “deep water” function. I did this and it made very little difference except now a wash cycle for bedding is 104 minutes! Also, still had a big dry spot on my sheets!When I called again to Whirlpool they scheduled another repairman for a second opinion, turned out to be the same person with the same answers... I called Whirlpool again and was informed that my washing machine is working as designed! I argued that a washing machine is designed to wash and clean clothes so this one does not do what it is designed for... I spoke to the supervisor, she was actually just rude, also said I not had 30 days to make a complaint and I was outside of that, when I asked to speak to her supervisor she said there was no one above her although she denied being the owner of Whirlpool! (That’s my little joke). Anyway wish someone had warned me prior to this purchase.

I purchased new and installed my heater in 2003. SN: 0253109845, MN: EE3J50RD0454. I started removing and replacing or cleaning heating elements in 2011: pretty good service. In 2015 I noticed black and brown water coming from the hot water taps. I opened it again, cleaned it, and realized anode replacement was required. That is when trouble started.I tried everything usual including 4 foot cheater bar, heating the coupling, impact wrench, tapping with a hammer, etc. Finally found a 700 ft-lb. pneumatic impact wrench on sale at Harbor Freight. After serious wear and tear on my air compressor and about 1-1/2 hours of work with the impact wrench, I got it out. The threads were messed up some, but I did not look close. I had to put the 1-1/4 inch head back in to return it to service while I found and ordered an anode. Could not get one from Whirlpool and could not buy one in Lowes where I bought the heater.The surprise was when I cleaned the threads to put the head back in, I had to use almost as much time and torque to get it to stop leaking as I did when I took it out. Then, when I did try to install the new anode, it required to same effort. Conclusion, There was some kind of imperfection with the threads in the coupling that messed up the threads on the initial installation of the anode, which made it nearly impossible to remove. Whirlpools quality control stinks. The next one will NOT be Whirlpool.

We have had a Whirlpool Refrigerator since 2004. We have only had minor issues with the ice maker within the last 3 years. We have had no major problems with this refrigerator. The other minor problems have been the quality of the drawers. After 15 years the plastic started to crack on them.

We purchased our 4 French door refrigerator in November 2014. It started making a loud noise, like an air compressor about a month ago. So loud that when we are watching TV in the bedroom we have to close the door! It continued to get louder and more frequent so I called Sears. It is under warranty so they sent a repairman out. When he came, he said it was because we had the refrigerator too cold & it was causing ice to be stuck around the fan??? We had it at 5 and the coldest is 7... He suggested we put it on 3. 2 days later and it is making the same noise again. Will be calling Sears again. I saw a similar review saying the same thing!!!! This is a five month old refrigerator! Very disappointed in product and service.

We bought this washer from Sears with big hope. Within the first year, we had 14 service call covered by the warranty but required 2 to 3 weeks in doing without. Whirlpool replaced the washer at no charge but continued to have various issues over the years. The new one is the control module that Whirlpool knew was faulty but did not let their customers know. The control module went over the weekend but I repaired it myself and do not have any more issues. I literally went in and tightened all of the hardware, removed and install the pulleys, motors pumps and replaced a lot of keep components with better quality. Guess that year the CEO made only 20 million rather than 19 million. Being an American company I was disappointed by the consumer relations people but everything is a throw away nowadays. Will not buy a Maytag or Whirlpool product again. Where has American product pride gone?

If I could give Whirlpool products and their customer service zero stars, I would! We built our beautiful home that was complete in June 2015. Our builder was installing Whirlpool products in the homes he was building at the time. So we decided to accept the microwave, dishwasher and drop in gas range that he offered. We had never had Whirlpool kitchen appliances and no reason to respectfully decline the brand. We bought a french door Whirlpool refrigerator as well so the handles would match our open concept kitchen.In addition to the poor quality overall, the microwave makes a terrible buzzing noise that has been fixed two times thus far. The refrigerator is so loud at times that its difficult to hear the television when sitting in the living room. The dishwasher does not dry the dishes on any setting to include heat dry hours and hours after the cycle is complete. This forces us to hand dry our dishes prior to putting them in the cupboard. The cast-iron grates on the drop in range already look terrible because the enamel is coming off. I clean all the appliances as recommended by Whirlpool and like to keep our home beautiful because it is our place of solace and comfort. As stated prior, our kitchen and living room are open concept so I now have to contend with an eyesore in the middle of our homes hub because Whirlpool considers this manufacturing flaw as cosmetic and wont cover it under warranty.To add insult to injury, these poor quality products are the higher end available from Whirlpool. We plan to wait for the year end warranty to expire and replace the four appliances with a brand that has always offered excellent customer service and has been very reliable and trustworthy for us. As a consumer, I would save yourselves the agony of purchasing any Whirlpool appliances!!!

It is a double oven. Temp varies too much. The oven is very inconsistent. Cooking Thanksgiving the temperature would not stay even. It took much longer than intended. It was quite frustrating. I would not recommend the Whirlpool double oven.

My wife and I purchased a brand new dishwasher less than a month ago. It stopped working after less than a month. After waiting hours on hold, the service company they sent out, went out of business before the appointment. Now after 3 months of nothing but frustration. I have written many emails and none have been replied back to. Worst customer service ever!! Not not buy Whirlpool or Kitchenaid (same company).

I purchased a refrigerator Model# WRF736SDAW12 on 8/9/14 and from day two, Ive had nothing but problems with the ice maker. We NEVER use crushed ice, but we get a lot of crushed along with cubed and crushed/shards of ice all over my fridge, hands and floor. My daughter (wearing her heels) already slipped and fell while walking past the fridge, not realizing that there was ice lying on the floor because my floor is light/multicolored, so we cant see the ice.After several calls, the repair person replaced all the components of the ice maker and the repair person was told (2/26/15) from the Whirlpool tech that we would just have to live with the problem because its normal and he was advised to tell me to get a larger glass. The repair person looked at my glass, seeing that it was already large, shook his head and said Whirlpool must want me to start using a bowl to catch all the ice. I couldnt believe it?! I bought this fridge expecting to receive ONLY cubed ice and yet I dont, so Im sure why they put that cubed feature on there when I cant utilize it. I only want a little ice, but the first thing that comes out is the crushed ice, and in order for me to receive more cubed ice, I have to fill up the entire cup that includes the crushed/shards of ice which floats to the top and ends up in my mouth. Thats the purpose of me selecting cubed, so I dont have to drink it!After the repair man left, I called customer service (2/26/15) and she told me that ice gets stuck in the chute?, so thats why I get crushed ice, but its normal she says. How is that normal? Please read all the reviews/complaints from both the Whirlpools and on Home Depots website for this model and you’ll see this is a problem, there is a flaw in the design.I cant believe a big company such as Whirlpool would treat me so poorly and brush me off like this. After the many posts I put on their Facebook page, they over and over say they will be in contact with me. I have yet to hear from them. I found another story on Pissed Consumer where a senior fell due to the ice falling all over the floor, so its not just me that it has happened to. Theyre putting people in a hazardous situation and they dont care.I have an autistic son who gets ice constantly, I can’t supervise his every move and I’m not able to keep up with his dropped ice nor can he remember to look down for it. I’m concerned that next time my daughter falls; she won’t be so lucky and could sprain or break something. How about my visitors? Do I worry about them suing me when they fall? I’m not so annoyed at the fact that I step on water with my dry socks or the 24/7 noise from the motor or the left door not shutting all the way than I am with the safety of my family.

We purchased a Whirlpool Gold Series dishwasher from Lowes approximately 2 years ago. Serial P32105232. We noticed a dark stain coming up in the hardwood floor. It was a water leak from the dishwasher appears to be from seal when water cycle leaves unit. This has caused over 70k damage to our home. Ruined entire hardwood floor kitchen cabinets warped so all need replaced. Our insurance company has made a disaster after owning home 10 years. Custom cabinets that match the laundry room as well. No to mention. The jackhammer used to bust up 800 sq foot of flooring and the concrete dust in our entire home. Please advise recourse.

I am done with Whirlpool. Everything I have bought is failing. I bought all new appliances when moving into my home. Dishwasher, 2.5 years old, quit. Cost is going to be as much as a new one. Refrigerator quit at 5 years old, what a mess that was. Paint is peeling off my clothes washer. I am not going to buy or recommend any more of this junk.

Purchased this fridge just over a year ago WRF555sdfz for over 2K. The stainless steel is starting to come OFF. Advertised as stainless Steel. Must be fake! Called customer service. I was told they could do NOTHING because it was a cosmetic issue. Remodeled our entire new kitchen. Thank god other stainless steel appliance are made by other manufacturers with no “COSMETIC” ISSUES. Will never buy another Whirlpool product and I will tell everyone I know.

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

We have had nothing but problems out of our refrigerator in the past 5 months. We purchased it a year ago in April and they have already replaced 7 parts on it. It still doesn’t freeze, and we have no ice... We will NEVER buy another Whirlpool product ever again!!!

Recently had a Whirlpool gas water heater installed. Would smell gas every time the heater kicked on. I inspected the vent, all the new fittings, with no luck. Leaving the windows open didnt help. Finally found the problem: the factory-installed line from the gas control valve to the tank was leaking. Should have kept my old heater. It was still working flawlessly after 20 years. You would think a new heater would at least be inspected before hitting the market.

Bought the model before this just over 2 years. Conveniently it broke just after the warranty expired. I chose not to buy a extended warranty as my last fridge from KitchenAid is over 20 years old and never had a single problem with and still operates like NEW. I can’t say that for my Whirlpool which was very expensive. It has been with an issue within the ice maker for over 8 months. Every computer board has been replaced twice with no fix. Then tried to replace the cooling fan within the ice maker unit seven times. Whirlpool could not find the right part, as the wiring had changed mid model and have no record of when it was changed and what models affected.Certified Whirlpool technician was great and so apologetic. I had taken 7 Mondays off to meet him to only have the wrong part time and time again. Whirlpool support tech line basically said he was wrong, yet I witnessed all visits and my 3 plug fan unit did not match Whirlpools newer part that was 2 plugs. I was not happy missing so much work because Whirlpool is incompetent. Finally my tech ordered a whole new ice maker, including the cooling fan. Lo and behold, Eighth time, parts did not match. He again called Whirlpool tech support and reordered another set one final time. Another Monday to find that this time the parts did fit, but cooling fan still did not work. He called Whirlpool tech support again. They started to trace wires one by one.Whirlpool tech support said it was a bad or broken wire somewhere in the cavity of the fridge buried in insulation and was not replaceable. In other words I have a $3000+ refrigerator that is useless. Whirlpool said they would replace the unit. But when I called, they said since I didnt have an extended warranty, they would prorate it and it’s going to cost me over $1000 of my money to to replace due to a manufacturer wiring defect after only 2 years. What the Heck, I was willing to pay to fix it, but Whirlpool can’t fix it. Don’t buy a Whirlpool product as they are Junk and do not stand behind their BRAND!!! No matter who I talked to, they kept falling back to their word track of it’s my fault I didn’t get an expensive extended warranty, yet they can’t fix a wire they installed incorrectly.Wires don’t just break after 2 years. You get longer warranties for cars for the Love of God. I asked them to just send me the money they were willing to put towards a new Whirlpool fridge, so I could buy a Real Brand that stands behind their products like KitchenAid. Of course the answer was NO. Buyer Beware, don’t buy a Whirlpool anything. Did I mention my Whirlpool certified technician was having a Whirlpool dishwasher issue that Whirlpool can’t fix and that’s his profession. Same type of response. Don’t Buy Whirlpool Products, they are Junk and you will get No support from Whirlpool!!!

Me and my wife bought a Whirlpool top load washer June 2011. Two months later the motor locked up and they repaired it; then the transmission started whining the next month. It was repaired. Now a bearing is going out all in the first seven months of ownership and they will not exchange washers, they just want to keep fixing this one until the warranty runs out. Whirlpool washers are a piece of junk and I will tell everybody not to buy anything Whirlpool.

Whirlpool under-counter dishwasher (model DU1345XTVB0) was purchased 14 months ago. Upper rack plastic adjustable wheel rack is broken. Will not replace. Dishwasher has probable design flaw with wheel positions causing overhanging load to put extreme stress on outer two wheels. The design was done to save money instead of having telescoping rails as most dishwashers do. Explained this. They will not even send a part. Many other Whirlpool dishwashers use these parts. Probable class action suit material.

My oven was 11 months old when I tried to use the self-clean cycle for the first time. 2 hours into the 4 hour cycle, the oven completely shut down, door locked shut and no lights on the control panel. The repair tech came out on a warranty repair call (no charge), explained that Whirlpool does not use a thermal protector rated for a self-cleaning oven and that it blows every time. He then proceeded to replace it with the same thing because he is only allowed to put in the recommended part, which is not rated for the high temp cleaning cycle. So the oven is usable, but not the self-clean. Since I am at the end of the 1 yr warranty period, even if I were able to get Whirlpool to replace the oven (ha!) there would be no warranty because I only get the original time limit. So if I had a new oven and it blew out, it would not be under warranty for fix/replace. The repair tech said this is a COMMON problem with Whirlpool self-clean.

I purchased Whirlpool Cabrio on 04/06/2017 at Best Buy in Lake Worth. The washer stopped working last month. I went to Best Buy to complain. I was told to contact Whirlpool which l did. Was on the phone for over 2 hours with representatives. Finally l was told a service person will come take a look and tell me whats wrong with it. The service person came after one week out. Told me he has to order parts and it will take a week for the parts to come in. That his company may send some else to come and fit the washer. Meanwhile l took off the day from work.Now today 08/08/2017 the service company that Whirlpool contract with sent another service person with the parts only for him not to be able to repair the washer. He has to order more parts and it will take another week or so. I was so upset called Whirlpool, spoke with two different representatives. All they could say is sorry for the inconvenience that l have to wait until the service person comes out again with the parts. And if he cant fit thats when they will be able tell me if it will be replace. Bottom line is that l will never ever buy Whirlpool products again.

I bought a Whirlpool refrigerator in April. The motor ran constantly. The company replaced it for me but it was back ordered until July. The one delivered in July kept freezing the items in my refrigerator. I had two service people come out to replace parts in the next couple of months. The entire time having to throw out frozen food. Finally, they had another one delivered in November. This one continues to freeze food in the refrigerator. Mind you, I just got it and they want to start again with service. Seems others are having the same issues. My 4 month old gas oven is also not broiling. Customer service is awful. Every time I call the wait time is over an hour and then they don’t really help. I would not recommended Whirlpool to anyone.

Our over the range Whirlpool microwave door casing is disintegrating where the door handle screws to the door. Big chunk fell off today.

First of all, I want to thank all of you who took the time to write all your comments. You have helped educate me in many ways. For one thing, I had no idea that Whirlpool made such bad appliances, or at least water heaters. I pretty much grew up in a Whirlpool household. But that was a long time ago. Things change. Anyway, I too bought a Whirlpool from Lowes about four years ago. It was the top of the line 50 gallon energy saver, and it has had problems staying lit for the whole time I have owned it. Because I read your comments before contacting Whirlpool (this time), I knew exactly what to expect. And that is what I got at first--someone trying to sell me parts via shipping costs. I said no to that, and a rep called and offered to replace the unit, which is exactly what Whirlpool should have done for all of you. I am writing this out of courtesy for Whirlpool. They did the right thing for me, and I truly do appreciate that. On the other hand, Lowes wants $700 to deliver and install the new unit. I live seven miles from the store. They set my other water, the Whirlpool I purchased from them, up in my garage. It is extremely easy to get to, and it is all up to code. In other words, even though they sold me a defective product and profited from both the sale and the delivery, they now want to do it all over again by charging so much for the set up. They did not even offer to prorate the new install. Of course, I will hire and pay a certified plumber to do the job, but I am very sorry to lose Lowes. I have always enjoyed shopping there. Home Depot is just across the street, and even though I have learned not to purchase a water heater, or any major appliance there either, I will go there from now on. Losing my business might not worry Lowes a whole lot, but two years ago I bought $5,000 worth of fencing from them, and God knows how much over the years. If you and I and all the thousands of other unhappy customers would stop going there, they might feel a bit sorry for doing us all so dirty. Agreed? Thanks again, you guys.

AVOID Whirlpool water heaters - Bought two 12 year warranty water heaters from Lowe’s in 2014. Model NU50T121-403 from Whirlpool. Thermocouple went out within the first 4 months. Called WP, they gave me a number to call for an authorized contractor to come out. Made certain to tell me that PARTS were covered, but not labor. $300 for the labor and two days later, hot water is back on. SAME THING happens again 6 months later, then AGAIN in Sept of this year. So 3 guys have been out to all replace the same part. This morning, hot water is out. Both tanks. Can’t keep pilot light lit. Called WP. They gave me more numbers of authorized contractors. No hot water and now I’ve got another $300 I owe to fix the SAME BROKEN PART. I wonder if this is how their last class action lawsuit got started?

Whirlpool Duet washer and dryers extremely silent and energy efficient. However the wash time can be reduced, it typically takes 40 mins for a full load to wash. The dryer filter lining is fragile and breaks quickly.

This $1,000+ Whirlpool Cabrio washer high-efficiency machine should have lasted between 10-15 years, not 1, not 2, not 3, not 4, not 5! To expect less is to fall for the consumer cave in - where you just give up, give in and buy another. The Whirlpool tech just told the appliance repair guy that was here that the repair would involve a recirculating water pump and a bearing, and would cost $481 to repair. The appliance repairman said he is not in business to condemn appliances, but said he has a Kenmore top loader at his house. Simple, no electronics and less things to go wrong. Well after researching brands and reading reports, I thought I was buying a machine that would last at least as long as my second hand Maytag. Whirlpool has not heard the end of me. I have heard several other people say the same thing. Repair bills are huge and machines do not hold up. So much for buying quality. Now Im going to contact the MA attorney general for the states implied warranty, which means if you spend your money on any appliance, that appliance has an expected lifetime of service. A $1,000+ machine is not expected to fall apart after a few years.

Unfortunately where I live the walls are thin. And my neighbors have complained about how loud my washing machine is. I load it correctly and sometimes while it’s washing it rearranges the clothes and it becomes unbalanced and makes incredibly loud thumping sounds when this happens. I’d say 1 out of every 4-5 times. Also I have multiple towels and clothing that have been pulled. The threads of brand new towel sets ruined from the washer.

My mother and grandmother swore by Whirlpool washers. They were the best. So, naturally I never wanted any other brand - then came the digital machines. End of an era. My experience with my 1 year old digital machine has been very frustrating. I do not like it. I prefer the old system.

Whirlpool double oven. The electronic control board has been replaced twice and needs to be replaced a third time after less than a year. The thermal fuses go each time I run the self clean. Whirlpools response has been disgraceful, trying to blame the problem on faulty installation when thousands of people have had the same problem. Ignore ANY US companys product; their warranties are worthless and they repair, not replace. My next oven will be European because in Europe they have to automatically warranty for five years any consumer durable. Consumer Reports ratings are worthless since they dont include breakdown experience in the ratings. Never buy anything from Whirlpool. They sell rubbish and dont honor their own warranty. Check the BBB rating. My brand new double oven broke down the first time that I ran the self clean cycle. Whirlpools response was to claim that the cutout opening was 1/8 inch too narrow and therefore they would not honor the five year warranty that I had bought from them. This was a lie, as I verified the width and it was exactly that required. Others have had the same experience. Whirlpool also makes Maytag, Kitchenaid, Kenmore and Ikea.

I purchased a new water heater in August 2013. The pilot light started going out in October/November of 2013. After calling the Tech Support phone number, (877) 817-6750, I was advised to clean the burner screen. First this is very difficult to do because the burner screen is underneath the water heater and almost impossible to access. Second the closet the water heater is in did not show any signs of debris that could clog the burner screen. I did as they recommended. Several calls, and several weeks later, they finally authorized a technician to come and service water heater. He performed a cleaning even though he couldnt find anything to clean; and he replaced the control module. The new control module worked through the spring and summer seasons and then I started having issues again in the fall, late October. Started calling the same phone number and was told again to clean the burner screen. I convinced them to send out the technician again. The A and E Factory technician came out and only cleaned the burner screen and left before I had a chance to get home. This happened several times and I called Whirlpool every time. The next A and E technician told me to try changing out the draft vent chimney to a different size, which I did. Problem happened Again! I finally asked for another plumber and they sent me 3 names of their authorized plumbers. I called Phil, Philco Plumbing. He told me that I needed to have more ventilation, so I added more ventilation, even though I later found documentation stating I already had more than what was required by the manufacturer. Again, a week later, started having problems. Call back and asked to have my personal plumber come out. This time the rep told me that I have always been free to choose any plumber I wish (why wasnt I given that option the first 10 times I called?). My plumber came out and replaced the control module and the thermocouple, but wasnt convinced that these were faulty parts, he honestly couldnt figure out why I am having this problem, but it was worth a try. That lasted about 1 week and now I am having the problem again!!Whirlpool will FINALLY authorize a new water heater, but they will not authorize installation for the new water heater. I have already spent money on recommended repairs that have not worked. I have taken 15+ hours off of work to watch plumbers do nothing that has rectified my problems. And now Whirlpool wants me to deal with installing the unit myself, OR pay to have it installed! They say they wont cover installation because I purchased it more than 1 year ago. They seem to be missing the fact that I have had trouble with it the ENTIRE time I have owned it!This Flame lock system is garbage. I found on Consumer Affairs that a few years ago a class-action lawsuit settled, dealing with the same issues. I think it is time for another round! I KNOW that I am not the only one dealing with this problem because the plumbers I had out all had similar complaints from many of their clients. Whirlpool wont fess up to the problem, but the problem is real.

Our Duet Whirlpool washing machine is less than 3 years old. It would not always turn on when we would start it, or it would start and then it would give me an F70 error. If we pushed the start button again, it would continue to go through the wash cycle. There was nothing in the manual about that error. I called the service department and they could not tell me what an F70 error was either. The service department wanted to schedule a service call right away and offered me an extended warranty for $345.00, for one year. Since it was less than 3 years, and it didnt seem too serious (since the wash cycle would complete after pushing start again), I figured that it wouldnt be that much of a repair bill, so I declined. Also, I might add, that my previous 25 year old washer had only had one repair bill for a total of $200.00.When the service tech left, he handed me a repair bill for $741.00! I nearly fainted! He put in a new board. I immediately called the service department back and they said, Sorry, the extended warranty was a one-time offer and no assistance was offered when I asked. I could have bought a brand new washing machine for that price. Bottom line is, I would not buy a Whirlpool appliance again, and I would never contact Whirlpool for a problem. I would contact someone local. Had I known that a repair bill could have remotely cost over $300.00 on a new washing machine, I would have waited until it completely died and then bought a new one, and not a Whirlpool!

Let me start out by saying that I had a Whirlpool washer that lasted me for over 25 years and done a great job of washing my heavily soiled clothes. One day it refused to run and I tried to get parts for it but it had become obsolete and no parts were to be found for it, so I had to buy a new washer. I chose whirlpool again and let me say that it was a huge mistake. This model is a low water, high efficiency, top loading machine. It has nubs in the bottom that agitate to clean the clothes. The first time that I used the machine, I found that I had made a mistake purchasing this machine. It does not clean the clothes and there is NOTHING efficient about this machine. I have to run the washer twice to clean my clothes and they are still not clean. It leaves soap in the clothes and does not rinse them clean of the soap. What it does very well is extract water from the clothes during the spin cycle. This washer really turns up the high RPM`s on spin cycle. It has ripped apart several of my shirts during spin cycle. Whirlpool really failed badly on this machine. I see clearly now that Whirlpool is not the company that they used to be back in the 1980`s. I still have the whirlpool dryer that I bought back in the 1980`s and it still works very well. To end this story, I loaded up this NEW WASHER in the back of my truck and took it to the scrap yard and I asked them to destroy it in front of my eyes. I wished that I had recorded the destruction of this piece of JUNK and posted it on YouTube for the world to see. I got over $450.00 of pleasure watching the crane operator completely destroy this pile of crap. GREAT JOB WHIRLPOOL … YOU HAVE LOST A CUSTOMER FOREVER. I WILL NEVER BUY ANY OF YOUR PRODUCTS FOR THE REST OF MY LIFE and will advise others not to buy Whirlpool products as well. I am a male, 62 years old and work hard for my ill spent money on your JUNK. Life is always a trial, live and learn the hard way. Warning to all consumers. Do not buy Whirlpool products ever!!!! Whirlpool can K.M.A!!!!

WRF993FIFM00 refrigerator is a LEMON - I bought my $3000 refrigerator just after Christmas. In seven months, it has failed three times and I have been without a refrigerator for a cumulative 7 weeks so far. Each time it failed, I lost all my food, (but not until after wed been eating compromised food). If you buy a fridge, I strongly recommend getting a thermometer, because we learned the hard way that these Whirlpool units can just stop cooling properly and you wont necessarily notice that it is above the FDAs recommendations for food storage. Anyway, after each call they will make an appointment a week or two out for a tech to come out, who then orders the parts that take weeks to come in. Now, my third service call in and the SAME PARTS have failed again and I am again without any refrigeration and they have no idea when the parts will be in. This has been an awful experience, and Whirlpool could not care less. DONT buy their products, under any of their names. IT IS TIME FOR A CLASS ACTION LAWSUIT. Too many folks have spent a lot of money and have been burned by Whirlpool, not to mention becoming ill from improperly chilled food!

We purchased Whirlpool Cabrio 8.8 cubic ft Electric Dryer with Steam Cycles (Chrome Shadow) Energy Star Model WED8500DC and Whirlpool Cabrio 5.3 cubic ft High-Efficiency Top-Load Washer with Steam Cycle Model WTW8500DC and have had no issues at all, only personal issues, such as me being 54 tall and cant reach the bottom of the washer tub to take out all my clothes, so my husband helps, he is 5 9 tall and can reach in it fine, so we do laundry together now! We have washed very small loads to large loads such as, bedding sets without any issues at all. We love the gorgeous look as well. We have only owned these since November 2015... so about 4 months now, but we are completely satisfied! We have always owned Whirlpool, our old set we bought in 1998 and they finally gave out in 2015! Whirlpool for life for us!

Ive read the reviews on this appliance. First of all the all of the washing machine being manufactured are designed to save energy and water. The water is loaded in the machine based on the WEIGHT of the clothes. the washing machines no longer have the features to (small, medium, large load) so the consumer can fill the machine. Having said that, most sales representatives will tell you appliances manufactured today are no longer designed to last 15-20 years, although they are way more expensive than the workhorses made in the past.I got rid of my fancy Samsung washing machine because it broke down at least 4 times within the first year of purchase and decided to go with the whirlpool because Ive had a workhorse in the past that was worked excellent. I love the fact the washers no longer have the agitator in the middle which allow me to wash my king sized bedding without the machine becoming unbalanced or making a lot of noise. So far the Whirlpool Cabrio washer and dryer is working very well. Id rather give the Whirlpool a chance any day over the new johnny come latelys, which are more aesthetically pleasing to the eyes but are failing miserably in performance. I also love my Cabrio 8.8 dryer. They both work better than the Samsung models I got rid of.

I bought a Whirlpool refrigerator model #wrt1litzyv along with the extended warranty from Lowes. The compressor stopped working just before the warranty was to expire and had to be replaced. The cost of repairs almost equaled the price of the refrigerator and took nearly 2 months for the reimbursement check to arrive. I had to call several times. They told me they hadnt received the paperwork even though I sent it registered mail and it was signed for and I had to resend it. Now, less than 4 months later, the refrigerator is again not working properly. Freezer is not freezing properly. Takes 2 days to freeze ice. This is the absolutely worst refrigerator Ive ever had. My last refrigerator lasted 20 years. This one is only 3 years old and of course, the warranty is now expired. I will never buy another Whirlpool product. And I will never buy a major appliance from Lowes either since they play games with the warranties. And after the refrigerator was repaired, Whirlpool tried to sell me another extended warranty. They wanted $308.60 for a 3-year warranty. Ridiculous that they dont stand behind their products. And try to sell more warranties instead of just manufacturing a good product.

New stainless steel range 5.3 cu.ft. with convection oven delivered by Home Depot on time. Before the day was over the trim around oven glass was falling off. Double sided sticky tape was not holding. Yes its put on using double sided sticky tape. Called Home Depot, once you accept it, you deal with Whirlpool. They must first send someone to look and see. Yes its falling apart. Service tech will order new door. Mind you it will also have the sticky tape. We have also noticed that the glass top has many deep scratches, he will replace that also. A week later still no word, when. Used the oven because I couldnt wait and as it heated up smoke poured out of it and a loud noise from inside. Turned off and pulled out bottom drawer to unplug. Bottom panel had fallen down and undersides were rusted. Only had the stove 3 weeks and its Christmas Eve. Will read reviews first next time. No problems with my other Whirlpool appliances.

5 years and 11 months ago I bought a 50 gallon gas, Whirlpool hot water heater with a 6-year warranty from Lowes. The 2007 water heaters were on sale, so I paid $329 for it. Within 6 months, I replaced the gas valve, and a few months after that, the thermo-couple went out and I replace that. Each time I called Whirlpool and got return authorization numbers for the parts, I still ended up paying for the parts plus labor. A year after that, the igniter went out and I had that replaced. Last year (the day before Thanksgiving), the thermo-couple went out again and I had to have that replaced - and it cost me for the part plus the labor - even though I had a return authorization number. I also replaced the water line connections/hoses to the water heater at that time. The customer service rep for Whirlpool told me at that time if I had another problem with the water heater, they would replace it for free - and the warranty was good until Dec 31, 2013 (this year). NOTE: Every plumber that has come out to fix the water heater and replace the parts stated that they see a myriad of problems with Whirlpool water heaters. They said the parts like the thermo-couples, igniters, gas valves, etc are poorly built and they replace them all the time. On Christmas Eve 2013 (two days ago), the water heater started leaking from the top by the valves - and so much pressure had built up in the heater the new water hose connections burst, spewing water all over the heater closet. I called Whirlpool the day after Christmas (today). At first, they told me they would not replace the heater as it was not in warranty and then I told them what I was told by the service rep last year. She finally agreed that my heater is indeed under warranty and gave me a replacement authorization number but she told me my warranty did not cover labor. I called Lowes. At first, they told me I would have to remove the old hot water heater myself and bring it back to the store in order to get my replacement. I am a 59 year old woman and I take care of my brother, a disable veteran. Although I am in good shape and healthy, I dont have anyone to help me get the gas and water disconnected and help me lift it into my Suburban. The man at Lowes agreed to bring out the the replacement heater and pick up the old one at no charge, but I will still have to pay $299 plus the cost of new hoses to have it installed. By the time the replacement one is installed, I will have paid a little over $1200 for a $329 water heater. I could have installed a tankless one for that, but I cannot see spending that kind of money right after Christmas. If I have one issue with this replacement, I will install a tankless water heater - and it will not be made by Whirlpool or any of its affiliates. My recommendation would be to steer clear of Whirlpool and their products.

This washer & dryer is the extra large capacity combo. Uses less water but surprisingly the clothes come out clean as a whistle. Less detergent. Sin all cleans clothes excellent & saves you money. A win/win!

Always buy an extended warranty if you are going to buy a washing machine. Mine cost $129.00 extra and it is not through Whirlpool. Three control panels and two tub bearings later, the extended warranty insurance carrier gave us our money back to buy another machine. My wife loves the operation of the Cabrio, so we bought a WTW8200YW today, in the false hope that it will work much better. We have an extra washing machine in the garage for the three week period before repairs. The serviceman has to come look to verify the problem, then come back when the part arrives.

Purchased I assumed a brand-new electric hot water heater from Lowes. It worked giving us hot water for 5 months then it quit. We called the number they have located on the side of the water heater and they sent 3 references such as plumbers for us to contact because everything they told us to purchase didnt work... so after their references, plumber came out. Instead of him telling us what was wrong why all of a sudden we stopped getting hot water he didnt return our phone call. As a professional that sucks!!! So WHIRLPOOL CUSTOMER SERVICE says the hot water heater that had been working for 5 months wasnt up to code and wasnt wired right and WE need to pay an electrician to connect it right... thats **. The electrician did it correct the first time. Whirlpool just dont want to accept the fact that their equipment is faulty!!! But thats good because I will NEVER purchase anything WHIRLPOOL makes. I dont care if they start making water. I will just quit The hell with that company!!! WHIRLPOOL SUCKS!!! Heres the serial number 1626103174130 and if I had read the neg reviews before I purchased the hot water heater I wouldnt not have done it!!!

The stainless steel refrigerator door is rusting after only 5 months and the company respond it is cosmetic and we the customer have to live with it.... They will send a cleaning product which didnt remove the rust. Review that was written on the company facebook page wasnt published because it didnt meet the company website guideline. Its disappointing and frustrating to realize that we have to go through it. Not happy with customer service.

Yesterday morning I was in my bedroom when I heard a bang... I went in to the kitchen and looked around and couldnt see anything. Then I saw my cat sitting on the floor and looking up at the microwave... It was then I noticed that the glass on the front was all crazed and making a tinkling sound. Several pieces had fallen on the stove top underneath. I had to call the repair man who said he had never heard of this before. He had to remove the door. I could not use my stove with the danger of glass falling in to food. He had to order a new door and I had to spend $65 then. When he puts the door in, it will be another $200 or more.

We have owned our side-by-side model # ED5HVEXVB02 for just over six years now. The first thing that went bad was the ice machine (just days out of warranty). Over the next 4 years weve had to replace 2 of the drawers; they break really easily. Here we are just 6 years out and we are on our 3rd icemaker. This refrigerator is a lemon. I sincerely believe they designed an inferior product so that they could get you hooked. We probably would have been better off after the first issue if we had sold this lemon instead of spending all of this money and future money that it will take to keep this product going.

I bought in 2008 a Whirlpool Cabrio washer because it was the best. It cost me $900 plus 170 extended warranty for four years.This month, my washer showed an f1 code. I call the Maytag store and guess what, they are not there anymore. They closed the store. I called for my extended warranty and guess what, they are not with Maytag and they filed a chapter 7. So, I spent over $1000 in a machine that only worked three years and now I have to buy another just because no one wants to take the responsibility on the warranty. I have to pay another $300 to fix the problem and even doing that, theres no guarantee that it wont fail again. So, and this is to the people of Maytag and their cheats, you may take my money but you lose me as a customer forever. Thank you for nothing. I will keep that in mind next week when Ill be in the store buying another washer.

I bought this piece of junk heater (serial no. 0804T411536) from Lowes and had their contract plumber install it in or about 2008. Since that time, I have had nothing but trouble with it. It just doesnt stay lit. Every plumber who works on it tells me that they have numerous problems with them and they cannot repair them - the customer has to get the part from Whirlpool. And today the woman I talked to told me that I had to pay the shipping charges, which vary according to how quickly one wants hot water! I personally find that a true rip off. If you cant guarantee the product you put on the market, then dont put it out there. I will never buy another Whirlpool appliance or shop at Lowes!

For the last month, in order to wash dishes, we have to start the dishwasher normally. The water will begin to fill the tub and then stop and all the display lights go out. We push the cancel/drain button and the dishwasher empties the water in the tub. We again, push the desired wash cycle button just like the first time and the dishes wash normally. We have purchased at least two of this same type dishwasher with the utensil holder in the door from Whirlpool in the past, with great satisfaction.

The stove is only 5 years old. The oven would not ignite. The gas was getting through, but theres no flame. Sears repaired it and put a complete flame and ignitor piece at a cost for a part of $132.00. I feel the stove is too new to have to replace anything. I am retired, so I do not use the oven often. I have only cleaned the oven one time in five years. It is very clean. I picked this stove out and paid $900.00, because I liked the style and everything about it. I feel you should look into this, and I should not have to pay for repairs in such a short time of ownership. The repair person said this stove already had an upgrade in it. Please respond. Does the whole heating element need replacing or just the ignitor?

Whirlpool Gold model WRS526SIAHOO - We purchased this refrigerator 10/2013 with all the matching appliances when we remodeled the kitchen. We moved our 1997 GE refrigerator into the garage. Now the computer board has gone out in the Whirlpool and we are back to using the 97 GE. The technician told me that he sees a lot of these boards going bad.

Model no. WTW4950XW is a piece of pure junk. Bought this machine 2yrs, 4 months ago. I just replaced it and to be sure not with another Whirlpool. The machine went out. Just quit. Nothing on control panel (computer). Didnt call for service tech as this machine has been crap since I bought it. Tried to return it but couldnt after I first used it. It would only give hot water on 2 cycles and that was on bulk or delicate. The regular cycle would only give warm but actually it was cold. Not enough water for 6 pieces of small clothes on regular. More water on delicate. Didnt wash very well. Clothes were not really as clean as they should have been. I used to only buy Whirlpool appliances but have now switched. They are bilking the consumer with subpar machines.

I just want to say that this washer is indeed a colossal waste of money. I bought an HE machine thinking Id be environmentally responsible, but the amount of times I have to re-rinse clothes negates that. Whats worse is that clothes come out dirtier than when they go in. Thats right--just put a brand new set of sheets in the washer and when they came out, there were dissolved detergent marks and gray, linty patches all over them (this using warm water and a soft gel detergent)--resembling dirt you might get from hanging clothes on a mildew clothes line. I cant tell you how many times I need to re-run the drain and spin cycle. This wastes time, water and quality of life. Id try to re-sell it on Craigslist but wouldnt want to subject anyone else to it--not fair even at $100!Updated on 02/23/2015I wrote a review in September 2014 on the Whirlpool cabrio model WTW5600XWO. To update the community on my recent customer service experience with Whirlpool: I wrote them a letter a few weeks ago stating that I dont expect them to follow up but wanted to let them know I would be buying Bosh products from now on and reiterating my anger at needing to miracle brush any dark piece of clothing after it goes through the cabrio. My letter specifically said I did not expect customer resolution but wanted to express what a rotten product they produced and marketed. They called back leaving a message to the effect: We apologize want to help you but need to speak in person. Please call [toll free number] and have your make and serial numbers available. I called back, and after waiting on hold for 10 mins., the rep took my model and serial numbers, said, Oh I see your letter. Please give me a moment to review it. Then I was told there was nothing she could do. I do apologize for your frustration. I couldnt BELIEVE they would bother contacting me only to make me go through that charade-- They are PATHETIC! I say boycott the company! Well, I certainly will.

A couple years ago we purchased a Whirlpool Cabrio WTW8000 top-load, high-capacity, washing machine based upon good claims of the salesman at Lowes - Appliance Dept. This was not an inexpensive machine. However, this washing machine failed to live up to representations and performance is poor. However, biggest complaint is that clothes are able to get stuck between drum and the unique agitating device which results in holes and tears in material. This is a significant design flaw and were not sure why more people dont complain about this rather significant design flaw. Of course, there are other shortcomings... but destruction of clothes is a serious problem. While this machine is in excellent condition, it will be replaced with a more traditional washing machine with vertical agitator ASAP.

I chose based on the current ratings of the machines. They look nice and they can handle large loads. I think EPA has changed wash machines to be back into the 1920s. I put my clothes in and there is no agitator in the center. My clothes come out twisted tightly into little round circles or balls, not much water but now it takes over an hour to wash my clothes. So we are conserving water but using more power, I also have to iron sheets and clothes because they are so twisted and wrinkled. I used to stick my clothes into the washer, select a cycle and go on my way and now I have to answer 5 other selection options, if I dont hold the button in long enough it just turns off.Have we all lost our minds, I think this is going backwards not forwards. I have talked to other women and they agree with me, we HATE these new washer and dryers. The dryer is a little better but not much. Also the tops are concave so your laundry basket falls off, and you cant put your soap on the dryer which is where I am used to having it. Now I have to clean my washer every 30 cycles, iron and it takes all day to do the laundry, yes and they call this progress, really!!! I purchased the Whirlpool Cabrio W10607 425A- SP and dryers Whirlpool W10680129C-SP, these are full size and have the steam options on them and are side by sides.

Immediately after install, the oven door face kept coming loose, they did send someone to fix & replace. Ive used the self cleaning twice, first time was fine, second time not so much. The cleaning process left major scrum below the window inside the door & below, which wasnt there before I did the clean. I take great pride in keeping my oven clean, do not allow build up because then you cant get it clean. This stove is less than a year old & has only been in place for 6 1/2 mths (I purchased before remodeling was complete).My last stove I sold easily, it was clean & guess what. It was 32 years old, only replaced because of updating our kitchen!!! I contacted whirlpool & they said its cosmetic & not covered. I called Lowes, they refer me to the service advance phone #. Well that was Whirlpool, not Lowes. Still nothing being done, other than they sent me cleaning stuff to try and get it cleaned (still working on that). Im concerned this stove is going to continue to have issues & will be out of warranty soon. Whirlpool is not standing behind their products & we have been Whirlpool customers for a long time. If I have more issues with this stove, we will never purchase Whirlpool again. Dont buy their products, they dont stand behind them!

Bought washer just under three years ago and the tub bearing started to sound like a jet airplane. Whirlpool seems to have an ongoing issue with the tub seal which goes bad and then allows water to enter the bearing which then fails. Whirlpool will not make it right, I guess I will have to plan on a $350 repair every two to three years if I keep this machine. I am very disappointed with whirlpool for not standing behind what is a known problem. They should replace these seals under warranty so that the Bearing does not fail. Thats my opinion, recall the seals and fix a bad design problem. I would not recommend ANY whirlpool products to anyone at this point. What other problems do they have with their other products?

I purchased a Whirlpool range YGY399LXUQ in 2012 from a great local appliance store, Trail Appliances. In 2013 the control panel stopped working and I contacted Trail. They quickly came out and replaced the control panel. In 2014 the same issue came up, but Trail could and would not do anything so I contacted Whirlpool Directly - they came out and replaced the control panel. In 2015 (same month) the control panel is not working AGAIN and Whirlpool has washed their hands of it. A replacement is over $400 + installation. The stove is barely worth that much. I would have thought that they would stand behind their product, in that this is an obvious continual issue or at the very least the service that they provide. I would not recommend their ranges to anyone because they will not stand behind what they product nor will I ever purchase anything that Whirlpool makes as it is obviously low quality.

French Door Model WRF989SDAWOO: Horrible quality, worse support! We have a new French Door (not inexpensive). Within 3 months of owning it, we phoned in because the unit was periodically making a very loud, metallic humming sound. We were politely told that noise was normal, and that if the unit was working when the service man came out, we would be charged. A few months later, the noise was constant, and we noticed that the temperature was not stable. Freezer was set to 0, Fridge to 36, yet the thermometer was reading 20 (freezer) and 38 (fridge). We called in, concerned that it was failing. We were put on a schedule for 9 days later. We were told we would get a call the day before with a 2-hour window when the tech would come. That didnt happen. We got a call that the tech would come between 8:00 am and 5:00 pm (he showed up at 5:35 pm).We phoned in 3 days later to tell them that we were losing food (freezer was now showing 29, fridge 40). We were told (by both Westinghouse and by A&E Factory Service, which is Sears) that we should rent another refrigerator. When the service tech showed up, the first point of contention was that we had Whirlpools warranty (and had paid for the extended warranty) rather than Sears Master Protection agreement. Nevertheless, the tech finds that there is a problem with the evaporator coil, which had to be ordered from the factory. The tech was nice, and told us not to wait to be rescheduled, but to call him directly, and he would come the business workday after we notified him that the part arrived. Another week without a refrigerator / freezer, and now we have to worry about what the tech told us; these units are NOT of good quality, and have had repeated failures in the cooling systems.

I have a Whirlpool dishwasher for a few years, it cleans great, works great, the dishes come out clean and shiny, so do the glassware. Even pots come out nice and clean, what more can you ask for?

Our dishwasher stopped working after 13 months. We are a family of 2 and use it once a week. We called Whirlpool and were told since it is past 12 months, they would do nothing but give us the name of a repairman in the area. We called our own repairman and $120 later, the sensor that had malfunctioned was replaced. Quite costly on a $450 dishwasher. Now, after 15 months, the handle on the lower broiler portion of my Range has come off and the screws will not hold because the plastic around them deteriorated. I just called customer service once again, knowing what I would be told and YES was told So sorry, nothing we can do. A new handle will be $45 plus shipping. We bought the refrigerator at that same time and every day, I wait for this appliance to have issues. In summary, Whirlpool/Maytag appliances are obviously made to be disposable after 12 months. They do not stand behind their products and I would not recommend them to anyone.

Updated on 07/30/2021: On 5/4/21 a tree took out a neutral on the power line to my home and after inspection by my electrician, he said my Whirlpool refrigerator was done. Not even 1 year old. When attempting to get Whirlpool to replace the refrigerator, they said they have to try and repair it before considering any other options. As they do not cover damage by acts of God their warranty would not cover replacement. Mind you I paid around $1500 for my refrigerator and it was not even 1 year old. 5/17/21 (2 weeks from when the refrig got fried and I had to get and I had to purchase a used refrig until then) serviceman said he had to order parts. 6/1/21 - Motor-Cond $158.20, Fan Blade $13.97, CNTRL Elec $60 CORE [PI] $497.45 and Evap Fan Motor $183.91. Did not fix the problem and had to order more parts. 6/8/21 - Evap Fan Motor $183.91 (first one did not work), Rail $34.76. Service tech said to wait a bit before moving the frig back to make sure it was cooling properly. Finally moved it back on 7/7/21 and hooked up the water line. Few days later noticed water leaking from the top of the freezer door and a lot of water on my floor. Heard a funny sound and found water spurting from the top 2 corners of the freezer door. Called whirlpool warranty and was told they would contact me. Next I get a notice that I have a service appointment in August. Was able to get it moved with a follow up appointment with a part that was broken during the last repair for 7/28/21.7/28/21 - Fill tube heater for icemaker was open and frozen - now tech ordered Rail $34.76, Freezer Door $1,525.84 and Valve $124.23. 6-8 weeks custom order. So we also have to added 5 service calls to the cost - Approx. $500++. Total Replacement Parts = $2,758.81 with a final total cost to repair of $3258.81+ vs just replacing or reimbursing me for the appliance of approximately $1800. Someone needs to review their model because not only am I without a working refrig for 4-5 months, but the repairs cost them $1500 more and now they have a customer who will not longer invest in Whirlpool appliances because of bad business practices and inconvenience.Original: I purchased a Whirlpool side by side refrigerator in July 2020. Earlier this month I had a tree pull down a power line and disconnect the neutral, allowing a full surge of power to go through my house. It fried the exhaust hood, literally melting the components. It also fried my refrigerator. The electrician who reconnected my home signed an affidavit that the refrigerator was permanently damaged due to the surge. When contacting Whirlpool to file a claim, I was on hold over an hour before getting a person. This happens every time you attempt to contact them, so patience is required. I was not able to get a service call on my refrigerator for 2 weeks (5/17/21) so that left me without a refrigerator. The service company showed up early and I had no choice but to leave my job or reschedule another 2 weeks out. The tech said he could only repair and made an attempt to contact Whirlpool to get the unit replaced and he was on hold for over 30 minutes. They declined and said because it was an act of God they could not replace it. I was already having issues with the unit before the surge of a constant defrost that was causing food to spoil due to melting then refreezing causing freezer burn. I also lost over $500 worth of food. They dont cover. It also caused the icemaker to constantly freeze up. Now it will take at least another 2 weeks for the replacement part to fix and a refrigerator is not something you can go without that long. I had a concern this would happen. When speaking with customer I service, they said they just needed the tech to confirm it was damaged to replace it. At this point he said he does not know if the piece (on 2 weeks backorder) will fix it. They can only tell after the fact. He said Whirlpool only fixes and does not replace, which is not what Home Depot informed me when inquiring into the warranty with Whirlpool. They said Power Surges are covered. So with this in mind, I would seriously consider buying from Whirlpool. Things break, situations happen and no one should have to go without a refrigerator for over a month because they may be able to fix it. Then there is the concern if something is melted/destroyed inside, if it could cause a fire in the future. Will never buy another Whirlpool appliance again. They cant stand behind their products, the products are worthless. And yes, I am very upset. Again - just had Whirlpool tell me its not covered as it is an act of God! ARGH -

Whirlpool Duet 2009 Model WFW9400SW02 - Worst experience ever with a new Whirlpool front Load washing machine. It broke down with error codes F28, F70, F71 13th month just after warranty and was leaking water. Bought 1 yr 153.00 Whirlpool extended warranty. Many reviews in internet have same complaint. Immediately had it repaired after waiting my 60 days to use warranty, but did not work after the door latch switch and one of 3 main circuit boards was replaced which was over $600.00. That was 2 visits. Fired them and had warranty company send different repair Co. They came twice with a cost of $840.00 and worked for 30 days and then had no power. 3rd repair company came out and wanted $350.00 to order part. I was offered $1195.00 cash or $1499.00 replacement top of line Whirlpool WFL98HEBU. Nice! But only 1 year warranty and I had to pay 200.00 shipping. I decided to take the money since I did not want to risk the break down on the new washer. The reviews on the new washer were not favorable with break down as the main complaint. 4 repairs in 1 year is lemon law on my warranty. My repairs were 4 in 45 days.

On 1/24/12, I replaced a 15 year old water heater that had started to leak after years of faithful service. The new Whirlpool unit heated water to a tepid level only, and that was obtainable only after running several faucets at a time, full bore. I used the product manual to trouble-shoot and was unable to find the problem, so I called Whirlpool customer service and was told that I would need to have a plumber come and and inspect the plumbing before a technician could be sent to check the water heater. I was not very happy about that, but complied. The next day, a plumber inspected the lines and fittings, tested the pressure and agreed that the problem was likely a faulty water heater. That cost me $95.00. I called Whirlpool again. This time, I was told that I should have had the plumber call Whirlpool while he was still at my home! The customer service representative agreed to authorize a service call, and I was given the phone numbers of three companies to choose from. Apparently, I chose wrong. The plumber seemed experienced and was very friendly. He was at our home for about 40 minutes, made a cursory inspection and said the problem did indeed seem to be with the unit, and he would return to his office to contact Whirlpool and arrange for a replacement unit and he would call back. Tellingly, I realize in retrospect, he did not give me a receipt. After several hours, I called the company and was told Whirlpool had not yet called them, and if I did not hear from them soon, I should call Whirlpool myself. This seemed reasonable to me, and I did so, at which point I realized I had been lied to from the start. The Whirlpool representative said that the service technician stated that he had run an isolation test, obtained hot water from the water heater, advised the homeowner (me) that the problem was in the plumbing, and I possibly had crossed lines. She also told me that the technician had said that he had difficulty making the homeowner understand what he was trying to explain. A complete and utter falsehood. I asked her how an isolation test was carried out, and that I would call the plumber to see what was going on, as this was not what we had been told. I was livid and called the plumbing company back just in case there was some honest mistake. Of course, there wasnt. I would like Whirlpool to be made aware that the company that they contract with is disreputable and has a history of deceitful practices. I found many negative reviews, and in fact the sort of treatment I received seems to be their modus operandi, no receipt, never a call back, assure the customer their problem will be covered under warranty, misrepresent the the service performed. The reason I add this last statement is that at no time was the new water heater disconnected, drained, refilled and allowed to return to operating temperature; the so-called isolation test a process which Whirlpool told me takes about two hours. This test did not take place. I previously stated that the technician was only at our home for forty minutes. There was no test of water temperature. I have since replaced my water heater with another brand--it works fine and there were no plumbing problems! I thought the name Whirlpool meant something. I have owned quite a few Whirlpool appliances over the years, in fact my new washing machine is Whirlpool. But I am definitely disinclined to purchase this brand again. I am so disappointed with the service I received from Whirlpool, a huge waste of time and money, and I am out $95.00 for nothing. I think Whirlpool should reimburse me for this, as the original (honest) plumber was correct. My water heater was defective and should have been replaced at that time. If it had been, you would probably still have a customer.

We purchased a 50 gallon water heater in 2005. In 2008, the thermocoupling unit went out and Whirlpool sent us the replacement part and we had a plumper install the piece (at our expense, of course).Now, we are running into the exact same problem 3 years later with the pilot light not staying lit. We had a plumber come out this weekend and replace the part but unfortunately this time, its not fixing the problem. The plumber charged us $178. He said that he can replace the thermostat on the water heater but that would cost us close to $400 to replace and makes no sense to do since purchasing a new one wouldnt be much more than that. I am so frustrated with this water heater; I just want to throw it out in the middle of the street! We still have 3 years left on our warranty too. I have 2 very young daughters who need to take baths, and who also dirty up quite a bit of clothes that need to be washed in warm water. What a nightmare! Whirlpool, help us!

I purchased my Whirlpool washer and dryer 4 yrs ago. I was planning on purchasing Samsung but the saleswoman at Gils in Bristol, RI strongly recommended this junk!! A washer and dryer should not quit after 4 yrs w/ a household of 2. The dryer never dried properly. Each load took 2 cycles. Yes, repair were called and we were told its a design flaw. The washer just stopped spinning. Repair will would have been $550. These pieces of junk were replaced by GE electric stackables. Fingers crossed....they are working satisfactory!

Its a piece of junk. The only time it will finish a wash and spin dry is when it is empty. Otherwise, it stops and lists an unbalanced error code. I opened up the service panels and found no broken hangers or clothes. There’s no way to bypass the system. I have read of similar issues and of course, its just out of warranty. I assumed the warranty was like other brands but it’s much shorter. What to do? Purchase a washer with dials and not a brain; it will last years. Note that the models without a brain cost far less.

Purchased 2 sets of the full sized refrigerator and freezer combo. First was 2005 and second was 2015, both new build homes. We had a few probs with 1st set but the 2nd has been a nightmare. Just like others we have lost time and food because of the constant problems. Avoid @ all costs!!!! Apparently they only care about lining their pockets and not the consumer.

Whirlpool Washing Machine Model WTW4950XW0 - This washing machine was purchased as a gift by my father. We have owned this machine for about 2 years. I am very disappointed with the quality of this machine. I have 3 children and several pets. I use my machine a lot and need a quality item that will last. This machine is not that item. Within a few months, the machine was off balance and bolts had to be tightened. We have had problems with the belt, bolts coming loose and the machine not draining.More recently, the machine has become very loud... For approximately the last 6 months. My husband has taken the machine apart and looked for anything to be wrong with it and has found nothing. Now the machine is not running. I will turn it on and it fills with water and then stops. I will clear it out and restart it and it does the same thing. Another issue has been with spinning and draining. The clothes are soaking wet even after the drain/spin cycle.I have researched what could possibly be wrong with this machine and have found a vast number of items that could need replaced. With the money I have already put into fixing this machine in the past and the amount it will cost to fix it this time, I believe I will be further ahead if I buy a new machine made by a different company. I will not be buying a Whirlpool product again.

Two days after the one year warranty ran out on our front load washer it started making a terrible noise. Of course the Whirlpool warranty was no longer in effect. The good news I was sold an extended warranty from Nebraska Furniture Mart. Called the Service Provider and was told they will only service the washer if it is not working. After several more calls they scheduled a service call in 10 days. We are a family of four, yes no washer is a problem. Finally the technician showed up and said the main bolt holding the drum assembly in place had broken off. He would have to order the bolt. It is now on backorder for 3 weeks. No washing machine for 4 people and now nearly a month is a pain. Not only did my calls to Whirlpool do nothing but the calls to the third party Warranty Company have been very frustrating. My call to the salesperson at NFM was very helpful, but didn’t help get our washer fixed. This is our second and last set of Whirlpool laundry pairs in less than four years.

Bought a Whirlpool stove five years ago when I got my kitchen remodeled. In fact bought all whirlpool appliances stove, microwave, dishwasher, and refrigerator. The dishwasher and refrigerator have already had some issues which to me were because cheaply made. The microwave and stove are fine.

Cabrio Top Load Washer model WTW6800WW1 - Although we were very happy with the vendor where this was purchased and happy with the majority of the washer function; there is a problem with the cabinet & lid connectors rusting. Specifically, the lid connector on the left side totally rusted out, and also around the bleach cup, rust. There are also rust spots where the seam of the top section of the washer meets the bottom part. The washer was purchased in 2009. We have had it serviced in the past, prob 5 years ago, it needed a new motor and the rust was beginning to show then, while under warranty. I recently called Whirlpool and the associate told me that she had never received a call with regard to this type of problem. She did give me names and phone numbers of appliance repair in my area. I find it odd that Whirlpool would not make their associates aware of issues like this. I searched online and saw more than a few complaints about rust. So on it goes, no recourse, and as I read about the problem from others reporting this; it was mentioned that the vapors from the bleach cup etc, contribute to the rust. Additionally, even if it was under warranty, I was told that this is considered cosmetic and it would not be covered. Until... and I can only suppose, that until the lid possibly falls off while lifting, the cosmetic ruling may then turn into a function problem. Now there is also a squeaking sound, so off to call the appliance repair, check the cost and next time... buyer beware. I guess a lesson in science as well, hopefully this design flaw will be corrected for the next models in process.

I was a salesperson for GE for years and thought that they made the best washer for several reasons, but eventually had to purchase another washer which was a Whirlpool. Have been very pleased with my choice and would purchase a Whirlpool again. Washer is 14 years old.

We purchased a WRF989SDAM03 model French door refrigerator in September. A month later it began to make grinding noises when running. The noises got louder until it sounded like a car idling. We called for service, and the technician diagnosed a failing compressor. They replaced the compressor with some difficulty. Three days later we lost cooling. They replaced the compressor again. Now the refrigerator cools, but it runs 100% of the time. I dont mean frequently, I mean it NEVER. SHUTS. OFF. Its never not running. Today a technician came out, and after 1.5 hrs of diagnostics on the phone with a Whirlpool engineer, theyve declared that it works. Whirlpool refuses to honor their warranty and says that because the unit cools, I should accept that it runs 100% of the time. I can get no resolution from Whirlpool.

I purchased this LOVELY top loader on May 19, 2012 - the lid is broken and wont stay up. I am 4 ft. 11 inches and I need a stool to reach the clothing at the bottom. Kind of hard to hold up the lid and scoop clothes with the other hand!!! Today, I discovered it is rusting from the inside out!!! From what??? Pulled it forward to clean the floor underneath and discovered it has rusted and corroded even on to the matching dryer - white finish!??! Guilty by association! AAAHHH!!! I wish I could upload the picture! Whirlpool and LEONs warranty - they have some explaining to do.

I bought it 1 week 1/2 ago and cannot wash correctly the clothes in it, have to rewash 2 or 3 times and bedding? Forget it. Still is dirty. Water does not go over the clothes, it suck for the price I paid.

I bought a Whirlpool refrigerator model GSF26C5EXW02 from Lowes. It is a huge piece of crap that has had so many visits from the Royal Appliance guy, that we are now on a first name basis. Lowes was awesome and has actually replaced this junker twice at no cost to me and has, in fact, reimbursed me for all the food this fridge has ruined by freezing. The appliance repair guy cant seem to find a problem so I just keep getting ruined food because of this hunk of junk.

I bought an electric hot water tank from Lowe’s less than 3 months. No hot water so I called Whirlpool. They give me service dept over 150 miles away. They will not come. I need hot water and need help. The hot water tank is half way in the attic and half in the closet.

I got a BRAND NEW Whirlpool from Habitat for Humanity. I registered it as a new product and was told it came from Lowes. Habitat only warranted it for 30 days but when it went out in 60 days, I called on the warranty. They sent out a repairman who said it was unfixable and after 2 weeks waiting to hear from them, Whirlpool said they would not honor the warranty because the serviceman said it had been dropped. I am a disabled senior citizen, I guarantee you I couldnt lift it long enough to drop it. Habitat said they didnt drop it and so did Lowes. Meanwhile, Whirlpool had the nerve to send me an extended warranty for the same refrigerator that they wouldnt honor the original warranty and they treated me like I was just trying to cheat them or something. The only thing I can do now is put it out in my driveway with a big sign on it to warn others NOT to buy Whirlpool products. Big deal.

On October 29, 2009, we bought a new Whirlpool 30 gallon gas hot water heater to replace a Rheem we had for 20 years. We immediately had problems with the relief valve leaking, so we ran at the local hardware store and bought another valve. Next, we had trouble lighting it (husband was a plumber years ago) but a call to the hotline and we were in business. Now just over 3 years later, the pilot light started to cut off at will. Troubleshooting solved nothing. We called the hotline again and were given a part number, an authorization number and told to go back to Lowes for a replacement part. Figuring how our luck runs, I called first and was told there was no such part number. Trip saved. Now after reading all of these reviews, we have decided to cut our losses and buy another Rheem. You can find the Whirlpool hot water heater sitting beside our 2-year-old Kenmore HE washing machine (also made by Whirlpool) on the garbage pile. No more Whirlpool!

We purchased a Whirlpool Duet front load washing machine Model #WFW9550WL in July 2009. In July 2016, the guide on the door hinge broke, making the machine unusable. When performing a national search for the part number (#8183202) to replace the broken hinge, I found that there were none available anywhere in the United States. When talking to Whirlpool, they indicated that during 2015, they only sold 142 of this part, and were currently looking for a new manufacturer for the part. They further indicated that the part would not be available until late September or early October of this year.

We bought a new Whirlpool refrigerator from Sears last summer --- and after experiencing some motor noise we thought this would be ok. We went away to Mexico for 4 months this past winter and this spring the noise seems to be much worse. It seems to have changed -- and we called Whirlpool and they would not help. They said we pay even though we bought this fridge less than a year ago. Consumers should be made aware that if your fridge is noisy you pay for any servicing - they only cover a malfunction. My fridge needs a professional to look at the cause of the loud motor noise.

Our new home came with brand new appliances. I love our Whirlpool microwave. Its reliable, quick & has lots of great pre-programmed features to assist with regular. The independent timer is a total bonus too.

I purchased a top load Whirlpool washer from Lowes 2-8-12. It got so it wouldnt rinse. When it came to that cycle, it just skipped it and went directly to spin. I dont know how long it was doing this before I caught it. A repairman came out said I would need the equivalent of a motherboard that would cost $330.00. Needless to say, couldnt afford that amount for repair. So I purchased a very nice used Amana for $100.00. I always thought Whirlpool was a top of the line product. This has changed my mind. If it wont last any longer than 5 years I dont want it. There are just the two of us and we are retired so the machine was not overused. I am so disappointed and angry about this.

I have a Whirlpool fridge model G165ARXXF05 for over 3 years. This is the second time I have had to replace the motor on the ice maker. In calling Whirlpool for help in the matter I only got a decline from them... I would never buy a Whirlpool product again.

Whirlpool Gold Bottom Mounted Freezer - I advised Whirlpool that the refrigerator has two design flaws... one that makes the drain freeze up and even more importantly what is involved in correcting the problem. They replied that they were unaware of the issue when its all over the internet and has been for well over a year... maybe more. I sent them a couple pages of internet links and they said they would advise their engineers. As they have done with others, they suggested I should have gotten the extended warranty but that hardly addresses the problem(s).

I bought the Whirlpool Duet front load washing machine. It was a piece of junk and I bought it 3 years ago. Sounds like a jet taking off during spin cycle and drain.Well, let me tell you, its terrible. It walks out of the space its in during spin all the time and the F Codes. Im done! Just replaced the pump and motor for the drain on the thing and unplugged it several times to reset it. Still is giving me F codes.Im done, I tell you! Done! This has been going on since we bought it!

We purchased Model # WFG231LVQ from Appliance Connections. Its a 5 burner with oven. When my husband went to clean the stove door, the bottom handle fell off because the heat from the oven had melted it brittle. Weve had this stove less than 3 months. Then we see where the clips that hold the glass on the front door have melted. The plate that separates the burner from the oven has bowed and splintered the porcelain. And the oval griddle burner only puts out flames on one side. Whirlpool sends a repairman out. He states that they really make them cheap these days. Writes down the whole list of things wrong with it. Repairman calls us back and reports that Whirlpool only wants to replace the parts. Im afraid to use my oven. I want it replaced or my money back!

Im with the rest of the people on here... The only mistake I made was not checking the reviews before purchasing a Whirlpool product. My washing machine is horrible... I dont recommend anyone purchase any Whirlpool products. Its cheap and has already stopped working twice in the last 6 months... I have had a repair man come out twice to replace the door locking mechanism... Not to mention the buttons dont work, they just slide back into the machine... Plus, you have to jump through hoops just to get the machine started the way you like it... If you make a mistake, there goes your whole ** load of laundry, not to mention the water wasted. Hell with Whirlpool - Dont ever buy a whirlpool product as long as you live.

We purchased an over-the-range microwave in 2005 Model No. MH1141XMQ-1 Serial No. TRS1112979. It has worked fine however, within a year, the grill cracked. It was not covered so we paid for a new one. A few months ago, I noticed a crack near the top of the door by the handle and then a couple of weeks ago, a huge chunk broke off the bottom of the door.

Stainless steel rusted in under six months - Purchased all new Whirlpool kitchen appliances in March 2013. In July 2013 finish on both refrigerator doors and freezer door was covered with tiny rust spots. The finish was obviously defective. Contacted Whirlpool, sent photos and was told the damage was cosmetic and not covered by warranty since it didnt happen within 90 days of purchase. Ice make did not work right from day one. Finally paid to replace it myself and repairman said Whirlpool discontinued the style of ice maker I had because they had so many complaints.

AquaLift cleaning system does not work. My oven was barely dirty and I had to scrub with the special sponge to remove baked on food after I did the cleaning system twice! Rust is also showing up on the drawer which they refuse to repair because it is ONLY COSMETIC! Stove is 16 months old.

I have had my Cabrio for a year now and quite frankly, I find more satisfaction taking all of my laundry to a local laundromat. There is no soak cycle and when you have a kid in sports, that doesnt help. There is no agitator, and I am now convinced that they were originally in all washers for a reason. My clothes have all worn out and are shredding, not to mention my very expensive bath towels that I am now cutting into rags. This was the worst purchase I have ever made in my life and will never even look at a Whirlpool again. When I bought my house, I had a Maytag that was 35 years old and it did a better job than the new Cabrio. Should have stuck with that brand!