I have a 2 year old Whirlpool refrigerator with french door refrigerator on top & freezer on the bottom. I am now spending almost $700 to have a new compressor put in because Whirlpool wont back their products.

I purchased Whirlpool dishwasher, model DU930PWSTO, in 9/2007. It quit working in 5/2012. I expected an appliance made by a reputable manufacturer (Whirlpool) to last longer than five years. It seems like a manufacturing racket where they build these things only to be replaced a short time later. With service calls and parts replacement, its cheaper to buy a new unit. Talk about a circle jerk! And who the heck puts anything else but SS screws in a water soaked appliance? Duh. Rust! Im disgusted and dissatisfied with the whole company. Im still waiting on their response to my complaint email; at the time, the machine quit working. Whatever happened to pride in American made products? Or, did this get company bail and were now slaves to the Chinese junk once again? Ill never buy another Whirlpool appliance again. Does anyone have anything good to say about this company? I wish I would have read this blog before purchase.

My wife and I purchased the Whirlpool calypso washer and dryers and have been regretting ever purchasing a Whirlpool product. Not more than a year and a half after spending thousands of dollars on their products the troubles started. I called the company and they sent someone out to look at it for repair. He vacuumed out the lines and kept restarting it over and over and eventually it started working again and they charged a hundred dollars and something and said there most likely be more problems since they have many calls on this issue. Sure enough it started again and just kept retrying it over and over to get it to work again as well as vacuumed the lines again like he did. Now its at the point it will not work no matter what. It just keeps flashing LD and shuts down. So I did a online search for other consumers having the same problem and was shocked by the amount of the same problem with others (search this model flashing LD and you will see for yourself). When I contacted Whirlpool they played dumb and lied right thru their teeth saying they have no issues with this model and refused to do anything. I have since learned there has been court cases where the courts ruled against them saying that it was defective and had to notify consumers which they never did. Even when the repairman came out nothing was said. I have since learned that all they did was changed the name to a different model which is having the same problem (no kidding!!) and continued to rip the public off in the name of CORPORATE Greed!!!!! I advise everybody never to purchase a Whirlpool product ever again and maybe we can bankrupt them and put them out of business where they belong. All the customer service agents deserve to be unemployed and suffering after long waits on the phone and then lying straight face to the consumers. Pure evil!!!! We all have to stick together and bring these criminals down. How can they say we have no issues when a simple search of Whirlpool Calypso problems with draining and flashing LD and shutting down. There are thousands of people complaining and no action is done. Shame on these people and their souls are lost forever. Never buy a Whirlpool product and tell everybody you know to stay away! They should have their ** and/or ** cut off and have to suffer the same way the struggling consumers are after scrounging up thousands of dollars for a 200-pound metal paper weight that aint worth a damn!!!!

I bought a new whirlpool washer 12/15. In May 2016 it stopped spinning fast, clothes are coming out wet, still waiting for it to be repaired. Waited 3 weeks for a part, repairman came out today, it did not fix the problem. Now it doesnt work at all. Service tech said wait another week for more information. Called whirlpool. They offered me a $50 gift card to cover the laundromat. I paid $1200 for this washer. whirlpool doesnt care. I want a replacement. They said the warranty covers repair only, but they cant fix it.

I am very sorry I bought this machine. CU rated it pretty good. Nope. 1 - It rarely dries everything completely. e.g., the collars of t-shirts or turtleneck shirts are damp after the load is finished. I have to run the machine again....Energy efficient? Energy schmefficient. and I havent even TRIED to use the low heat delicate cycle. 2 - The cute modern buttons are hard to push in. 3 - The top of the machine doesnt have a level lid... Its curved. Not very useful for setting anything on while you work at any part of your laundering process.

I have a lower end 4 burner model but I love it. Both power burns are in the front (I would change that) and electronic ignition. The oven temp is true and heats up quickly, I bake upwards of 700 cookies at Christmas time. Even being a lower end model it works great and I use it everyday. I think it is more energy efficient than the model that I replaced, which I replaced in order to have the electronic ignition. I would recommend this Whirlpool Range!

Ive never considered writing a complaint before, but feel it is necessary in this situation. I have had my Whirlpool refrigerator since November, 2007. It has worked great until this past April when the freezer began to overfreeze, cause frost and ice to build up. I have had Whirlpool Factory Service out to repair the unit twice a month since April with still no resolution and the appointments are getting harder and harder to get someone to come out in a timely fashion. I called on September 1st and the closet appointment is September 15th. They werent even able to book the appointment when I called. I was told someone would call back within 3/4 days. When I didnt hear back today, I called to find out an appointment was set.Ive called the Resolution Team to obtain back records of service but havent been successful in receiving a phone call or email. I havent received all of the follow up emails after service which is frustrating since there have been two technicians that have come out for repair and were not provided any history on the unit. If I had the follow up emails, I would be able to share that information with them.I contacted Customer Service to find out what I can do in regards to the issue I am having and was told its best to stay with the service provider that I began with since they are familiar with the issue. I would imagine if they are familiar with the issue that it should have been fixed by now. Ive also sent a response card back to Whirlpool Home Appliances at the Survey Response Center and havent heard anything from them either. When I called to follow up there wasnt anyone that could point me in the right direction to obtain answers. They were able to provide me with the mailing address for Consumer Affairs though. Ive been told numerous times that if it gets to a point it costs too much to fix they will replace the unit. Im not sure when that decision is made. I have an extended contract and will extend it again in October when it expires. I just want the unit fixed or replaced. Its been since April with the same issue. Very disappointed consumer.

I inherited this microwave when we bought our house and have been very happy with it. It does not take up much space, heats well and evenly and the beep at the end of the cycle is not as irritating as other microwaves I have owned. However, I do find the glass turntable difficult to get back on track after I take it out for cleaning. It will wobble if not put back exactly right.

They will not honor the extended warranty on their fridge which Ive had for less than three years which will not defrost making me lose thousands in spoiled food. Extended warranties are contracts and this company should be penalized and shut down for fraud.

I bought a pair of Whirlpool front loading washing machine and dryer on May 23, 2011. The Duet Steam washer model is WFW9640XW, dryer is WED9470WW. Their high retail price was $1125 each. I did not pay this for them. I thought I got a great buy at Lowes for the price I paid, plus their 4-year extended warranty. Whirlpool used to be a very high-end appliance manufacturing company. Now, all they put out the back door is junk. I would advise not to buy Whirlpool front end anything. My washing machine started making noise about 2 weeks before I reported it to both Lowes and Whirlpool. The noise sounded like bearing not being lubricated, which that is what it ended up being.The noise got so loud that even with all my very expensive electronics (my home entertainment ctr equipment) I could not hear the TV which goes through an expensive Yamaha AV Receiver and those expensive Infinity speakers 7 channel system. The main bearing for the wash drum assembly was bad. After two emails and several phone calls to both Lowes and Whirlpool, Whirlpool was going to send the so-called re-engineered drum assembly. The style I have is 3 parts; the new one according to Whirlpool is one part, but if they put the same bearing in, youre going to end up with the same problem in another year. I live in a condo of just over 920 sq. ft. so really there is no room to repair them in my home, but that is what they are going to do. I will be getting the new drum assembly delivered to my condo and have the repair company doing this dirty job in the middle of my living room.Living in a condo, I have a small utility closet next to the kitchen where the furnace, hot water tank, and washer and dryer are. The closet needs to have some areas cut out with and installed two small hinged doors on each side, so if anything ever needs to be repaired or replaced, there would be a little bit more room to move items in or out. The problem getting the washer out is getting the dryer moved so you can disconnect the electrical plug, cold water hose for the steam, plus the vent hose. First, you have to get to the water valves which are very hard to reach. Because of the way cluster housing is made, they squeeze things into very small holes like the faucets and drain hose are located. I was asked by the repair person if I could help him lift these items out of the closet. I have had 7 fusion back operations and #7 left me in constant pain that I take a narcotic drug for pain daily. So, I called Whirlpool back and said the repair people were only going to send a tech. I was told that it is a two-man job: one tech and one helper. So Lowes needs to authorize two people since Whirlpool is sending the new drum assembly for free. I wish I could have gotten a new washing machine with the so-called re-engineered drum assembly. I am still probably going to have to squeeze between the bulkhead (wall) and the washer and dryer to disconnect everything since I am a small person. If I wasnt retired, I would have bought a different brand front loading washer and dryer, probably Bosch and took the loss on these piles of Junk. I love my country and do my very best even as hard as it is in this day and age to buy US. I served my country in the US Navy during the Vietnam War, just to see the civilians willfully buy Asian everything. So now, we have 4 Asian nations that own this country. I dont know why Whirlpool changed from a company that you could trust their products to a company that doesnt give a damn what they put out the back door. These companies still havent gotten the clue why folks buy goods from other countries. I think they need to open their eyes, but I guess with Whirlpool still being a company that is selling a very large number of appliances and making money off of us, suckers, they dont need to change. The only way they are going to change is if folks stop buying their junk.

I purchased the original Whirlpool water heater from Lowes in April 2008 for $372, and an installation charge of $443, grand total - $815. In February 2012 the tank leaked profusely, enough to ruin a section of hardwood floor in the room behind the garage where it was installed. Whirlpool provided me with return authorization, and Lowes provided me with a replacement water heater. So far so good. Since the original installation was done through Lowes, the replacement had to be as well, according to Whirlpool, but now they charged $500 with tax to install the replacement water heater! Grand total now is $1315. Fast forward to May, 2014 and the replacement water heater, just barely 2 years old, shuts off with a code of Bad gas control valve/thermostat. I call Whirlpool and an extremely rude 20-something staffer tells me the unit is out of warranty by one month! The replacement unit has no warranty at all - nada - only the original one does... Is this unbelievable or what?! BUT, they would be glad to send me the replacement of the defective part for $200 PLUS overnight shipping charges, and I would be responsible for all labor charges to install it. Had I opted for this my original $372 water heater would have wound up costing me in the neighborhood of $1800!! I told her in no uncertain terms what she could do with the repair part, and now I am going to go shopping for a water heater that will last me more than 2-4 years, and you can bet it wont be a Whirlpool, and it wont come from Lowes.

I replaced our old 50-gal water heater (10 years old) with a new top-of-the-line Whirlpool 50-gal water heater in Feb 2011. The Friday before Memorial Day, the heater went out and the pilot refused to stay lit. I called and jumped through all their hoops and finally figured out that it was the gas valve, because the pilot goes out as soon as you release the button and the milli-voltage reading is ok. They sent me a replacement and it cost $145 to have a plumber come out and install it. We were without hot water for 5 days. Now 9 days later, the pilot keeps going out. This time I can re-light it, but after the water heats up, it is apparently going out again. They refuse to replace a 12-year warrantied water heater that is only 2 years old and I am going to have to hire a plumber again to come out and attest to what we already know. This water heater is extremely loud. When we had it installed, I read the reviews and there were similar complaints (sounds like a mini jet engine). We dont seem to get as much hot water as we did with our old builders grade heater. This is a bad buy and I would advise anyone looking to purchase to look elsewhere.

I have been unhappy with my Whirlpool Cabrio washer since I purchased it from Lowes. I should have looked online before I bought it and then I would not have made the mistake of buying it. The washer leaves soap deposits on the clothes and sometimes leaves a colored soil. It has ruined numerous clothing by tearing out hems of towels and wash cloths and tore a hole in a favorite sweater. I prefer an agitator in my washer. From what I read, I will soon begin to have other major problems and then I will replace it, but not with a Whirlpool.

Refrigerator caught fire - I own a 2003 Whirlpool Gold side-by-side refrigerator that I bought new from Lowes in 2003. On Friday, July 13, 2012, I woke up to the smell of burning wires. I called 911 and they sent out a fire engine. While waiting for the firemen to arrive, my neighbor came to help me determine where the smell was coming from. Within seconds, we heard loud clicks and a huge cloud of gray smoke came out from behind the refrigerator. The firemen arrived, entered the house, unplugged the refrigerator and told me that the smoke and smell was coming from behind the fridge.

The bottom of the drawer collects water and freezes and then overflows onto the floor. There is no drain pan under the refrigerator. Then the freezer collects frost over the food, and walls of the freezer. I have to unplug the refrigerator and let it thaw and then plug it back in. This process is repeated every week. I have had it less than 2 years!

I am very reluctant with online product feedbacks. But here is one story that needs to be told. I purchased a Whirlpool 3D Split AC 2 years back (and hence the product is out of warranty). The product quality is so bad (and unreliable) that within 2 years the coils in the Outdoor Unit have started to leak. When I requested for service visit the technician (so called) came over and did a wet service and took the fee (without an invoice). And assured that the AC would start to work fine. Within a week we realized that the AC is not cooling enough. Again a service visit was called and this time the technician (supposedly) diagnosed the above problem. The repair cost told to me is to the tune of Rs 10,000/- for a product cost of Rs 36,000/- (or so) bought just 2 years back. Does anyone in Whirlpool understand what QUALITY means??? Does anyone understand VALUE FOR MONEY... This aside I have a 2 Tonne Whirlpool AC, 350 l Whirlpool DD refrigerator and a Washing Machine... I think its time for Move over WHIRLPOOL and HELLO MITSUBISHI, BOSCH, HITACHI... End of a great consumer brand...

I purchased a Whirlpool High Efficiency washer and dryer (Model WED4900XWO) from Lowes in March 2013. This washer has performed miserably. I dread each day when I have to use it. The groaning sound is annoying. My husband and I try to leave the house when the washer is being used. We have tried all cycles and combinations of cleaning detergents to get clothes to come out clean. On a regular basis white clothes will come out with spots or discolored to the point the clothes have to be thrown in trash. This is the worst washing machine I have ever used. I will never buy another Whirlpool product.

My Cabrio washer is 6 years old & has performed poorly from day 1. It does not clean properly so I have to rewash or wash clothes on a longer cycle (so much for energy efficient), it sounds like a plane taking off and has actually startled visitors, and it mysteriously forms sheets, towels & blankets in the shape of spare tire. This is the worst washer Ive ever bought.

Weve had the 3 door model (side by side fridge with chilled water inside and full width deli drawer, freezer on bottom w/ Icemaker) for 13 months now with absolutely no problems. Chilled water inside frees up door for more storage.

They contacted me to replace the washer. And the uninstall/install will be at my own cost. Its more generous than I expected. I thought they would send another technician and make everything go back and forth. This solution does save my time. I hope the new machine wont have all the series of issues.

I bought my Whirlpool induction stove several years ago. We normally use a toaster oven for baking as we are only 2 in our home. Last year I decided to cook a large turkey for the family. I threw the turkey into the oven and started cooking it. After an hour or so I decided to start cooking the potatoes etc on the stovetop portion. My potatoes started cooking and my element shut down. I did everything I could to get it going but finally resorted to the manual to see if there was a suggestion. The suggestion was that the oven had heated the burners too high and that I had to shut off the burners and wait for 5 minutes and try again to use them. The oven was only cooking at 300F. I waited 15 mins to get it running again. The stovetop went out once again and I had to stop cooking. Conversely Ive had the same issue with the oven. Ive been cooking in the oven and have had it shut down as a way to address the stovetop being too hot. How am I suppose to cook on this unit with any kind of confidence? I did an online chat with a rep today and they suggested getting a technician over to the house. I was told I could pay $129 to have them look at it. This is obviously a design flaw that I was never told about prior to my purchase and would never have bought had I known. Shame on Whirlpool!

This refrigerator (Model #wrf560seymoo, Serial # VS31343718) was new in April 2013. In the last 3 years it has required 3 service repairs. Two under the extended warranty, one recent one 3 months out of warranty. All repairs came up in the last 3 years. The first repair addressed frost build up in the freezer. The second required replacement of the water filter compartment and the third will be addressing water dripping from the freezer door when I open it. Even after turning off the ice maker and removing the frozen puddle from the bottom of the freezer, it still drips water when I open the door. I have a call into service on this right now. I would like the company to fix the current issue even though it is outside of warranty. This product is too new to have so many problems and be just over 5 years old.

I bought a Whirlpool larder fridge 18 months ago. It suddenly stopped working so we got a service engineer up who said there was no gas. He said it would cost 50.00, but with no guarantee it would work afterwards.

I couldnt wait to get a front loader and hated it. As soon as I saved up enough money, I bought the water saver Whirlpool top loader. I love it! The clothes get cleaner and dont smell musty. Im very happy with whirlpool.

I have had my refrigerator for more than 10 years. It is a standard refrigerator with no extras and I have never had any problems with it. I think things that dont have too many extra built into them are better with not so many things to break down.

We purchased a Whirlpool side by side from Lowes and an extended warranty. Immediately maybe a month the ice maker froze. Ice container in the door. Repairman said design is notorious for this problem. This was an ongoing problem. They replaced icemaker and it continued. Finally the warranty people told me it could be deemed a lemon if repaired for the same issue 4 times in a year. They deemed it a LEMON and I received a store credit for the purchase price less the warranty amount. I purchased a new LG French door. No issues and its been 5 years. If you have an extended warranty do some checking on the lemon.

For years, Whirlpool has had an outstanding reputation for quality, so I cannot understand why a refrigerator I have owned less than three years has to have all the shelves and bins replaced. Not the glass, just the plastic. They actually started breaking the first year. I have literally had to tape my shelves together. These are very expensive and yet they are very low quality and of course are not covered on the warranty.The plastic is not built to withstand the cold and/or weight of food products. They need to get rid of the plastic and replace it with metal. I dont want to replace them with the same low grade products. I own the model ED5JHEXTB00 serial # HRU4010107. Also, the ice maker has been replaced twice. What has happened to Whirlpool

Purchased a Whirlpool hot water heater from Lowes. Heater has 6 year warranty. Hot water heater is 1 year old and the pilot would not light. Contacted Whirlpool warranty department to what the failure cause. A new control was sent and replaced by a qualified journeyman plumber; still not working. Called whirlpool warranty department, told control valve must be faulty. We have gone 5 days with no hot water. I am not waiting another 5 days to get hot water. I am having the plumber take out this worthless Whirlpool heater and haul to the scrap metal business. That is where I should have sent it from the get go. Dont purchase a Whirlpool product. The money should be spent on a product that works and will last.

I have the Whirlpool washing machine for last 15 years and there has not been any complaint since its acquisition. I do a lot of laundry because I have a big family, but not major issue so far. I will recommend this brand to anyone willing to buy a washing machine.

Whirlpool Gold GC3SHAXVBOO - Two issues in two years. We purchased this refrigerator online through Whirlpool in April 2010. Almost a year later, a circuit board went. This was repaired under warranty. Our refrigerator was making loud cycling noises and we were told this was normal. Now a year later, again we have an issue. This time its the compressor. We called customer service and were told there is nothing they can do. The cost to fix approximately is $700. This is very upsetting to buy a $2000 refrigerator and have two major issues within two years and then not have the company stand by their product. I would wonder how many other people have this model and have these issues as it seems like a lot. Whirlpool customer service is terrible, non-caring and offered no assistance.

This French Door refrigerator looked beautiful. There are only two of us in the home. We purchased it at the end of 2014 and it just keeps getting worse. The front of each shelving has cracked. They look like they are dried out plastic the way it cracks. The drawer tracks have seem to keep crumbling pieces off. This is not a cheap refrigerator by no means, this is the first time buying Whirlpool, and I believe the last time.

On October 25, 2014, I lost my home, all of my belongings, and nearly lost my wife when my Whirlpool range model xfe371lvbo shorted out and caught fire. After spending thousands of dollars for an independent investigation to be conducted on the stove, it was determined that the control panel on the console shorted out, causing the fire. Since then, I havent had any response back from Whirlpool. I am in the process of meeting the required criteria for filing a claim, but have some questions, and everyone seems to be ignoring me. Please help.

I stumbled across this site while browsing the Net, looking for a way to deal with the same situation I now know you all have been struggling with: Whirlpool Washing Machine! I wonder: Is NASA still accepting volunteers for their living on Mars experiment? Id rather beat my clothes on a rock than touch that POS Whirlpool that has me back on tranquilizers! Mine was purchased about 2 years ago when I was in bad health and my son was handling my affairs. I could tell - just by listening - there was something very wrong with it, from the first load my son attempted to wash. It would start and stop, restart, restop, ad infinitum and made a terrible racket. I told him nobody would intentionally make a machine like that--something had to be wrong with it but he assured me that he had checked both with the store that sold it and he also read the manual. He had a hard time accepting but we thought maybe this was because it was new and would settle down after some use; after all, the store (Best Buy) assured him the sound was normal for this particular machine. However, the weird sounds did NOT lessen nor stop, nor did the starts and stops. Little did we know, this was just the tip of the iceberg! We have encountered/suffered through every nasty performance detailed here: low water, wont spin, leaves clothes soaking wet, wont spin out excess water, lid locks (grrrrrr), it cant seem to switch from one procedure to the next; there is nothing washing the dirt out of the clothes--they just sit in the water and soak(?), then the water is released. Clothes come out with stains still on, so wet that the water must be wrung out of them! Very hard for me with arthritis all through my body! Ive tried countless times to reset machine to Drain & Spin. Ive even waited (yawn) for it to unlock so I can open and then readjust the heavy/wet laundry, trying to make it even all the way around so to avoid an unbalance. But nothing helps. It will start to spin. And then it stops. (wait, wait) Starts to spin again. Stops. (wait, wait) Starts again, does it a bit longer. (start to relax) Stops. Ive spent HOURS engaged in that kind of mindless, maddening frustration, just trying to wash one small-medium load. (I wash only for one person--myself, now.) My son, who got married and no longer lives with me, said the only way he could manage to struggle through it - and agrees it DOES take an inordinate amount of time--for just ONE load, he has to put the settings so that it washes in Deep Water even if small load. He sets Rinse, to 2 Rinses. He sets it to Soak even if the soil is light. Even then, it still makes noises, starts and stops, has to be adjusted several times during Drain & Spin. Last but not least, the noxious odor: OMG! I left one batch of laundry in the machine, with the lid open, as it was very late so figured Id dry them next morning. Some hours later when I went back to shake them out and put in clothes dryer, they smelled so awful, I had to wash them all over again! In fact, Ive had to follow my sons admonition to leave the lid up AT ALL TIMES unless actually washing in order to keep down the stink. I washed my last load with Baking Soda added to wash cycle in an attempt to lessen the odor and get laundry cleaner. Someone here wrote - in their review - that there should be a Class Action (Law) Suit filed against Whirlpool. I AGREE!!! And I want to opt IN on it. There are several law firms that advertise on t.v. that specialize in Class Actions. It would take some time and paperwork but will not cost us anything unless we win the case. Then the law firm gets a percentage. I am willing to work with one more others here who truly want to settle out this problem. I cant believe 2,000 (and thats only here), people are willing to eat hundreds, thousands of dollars of worthless, mind-gripping, rubble such as we have spent our hard-earned money. Other manufacturers recall their defective merchandise and/or replace it, or make arrangements with the retail stores who carry it to make amends, free repairs, whatever it takes to make dissatisfied, disenfranchised customers, whole. We paid for these demons from hell and we deserve to get an equivalent in merchandise (that works properly) or services. That is how it is done here in the U.S. For the life of me, I just cant comprehend why Whirlpool has been allowed to continue selling this junk--why no entity or person or lawsuit has stopped them! As I said, I am willing to work with a core group who is serious about filing a Class Action (Law) Suit against Whirlpool. It may be that the retail stores would be included as well; however, that is a matter best left to the discretion of whichever law firm we select to represent us. For those of you here who do NOT wish to be included, do not worry; you are not being pushed into anything. The way Class Actions work, you have the choice to opt IN (be included to receive your pro-rata share of what is collected). Or you are completely free to opt OUT. By opting out, that means you do not wish to be part of the Class Action and therefore, you will not be included nor will you receive any portion of the recompense collected via the Class Action. Just for your information, though: You are allowed, by law, to bring your OWN lawsuit against all or some of the same parties. The most common reason for opting out, is if you have suffered an extra large financial loss and prefer to file your own suit in order to collect ALL recompense; whereas, sometimes - in a Class Action - the individual plaintiffs may not recoup the total amount they feel they have lost. If you DO decide to opt out and go on your own, realize you will be fully responsible for lawyer fees (although you CAN add them into the balance you are seeking in your suit. Settlement of your claim may or may not include lawyers fees.) Good Luck to all. To those who wish to file a Class Action with some of the rest of us, please contact me if you want me as part of the core group of plaintiffs.

My landlord replaced our old Whirpool topload washer with a Whirlpool HE topload machine last year. Looks sleek, lots of settings BUT IT DOES NOT GET CLOTHES CLEAN - not on any setting, not if loaded as recommended or under-loaded, not if I use more or less detergent, and not if I follow all the tips for getting rid of residue. This machine so under-performs I have to spot clean my clothes AFTER I was them. And were not talking deep dirt or grime here, or things that need special treatment, Just ordinary dirt dirt, to which the machine adds gray streaks of dirty water residue. Thank God I didnt buy this turkey for myself -- I will NEVER buy one of these machines. I did two small rugs today and they came out dingier than they went in. These machines should be recalled. If I could give it less than one star, I would.

This Whirlpool side by side 2 door Refrigerator/Freezer stopped working yesterday. It was manufactured in 04/2013, and I purchased it from Lowes on 5/26/2013. My invoice number is **. The last 2 refrigerators I have owned worked for well over 20 years each. Actually, longer, but I moved away from one of them. It is unbelievable to me that after 3 years, and 3 months, this unit has just stopped working. Of course, it is coming at a horrible time. In addition, it is summer time in Southern California, so the heat is high, and the desire for cold drinks and foods is also. It had been working well, until yesterday. Today, I am experiencing the foods become warmer and warmer. I will not be purchasing another Whirlpool Product of any kind.

Dishes are very clean and the machine is very quiet. Only downside is the silverware in the door is not easy to load. The layout is very good with easy adjustments. Again, the downside is the silverware in the door is inconvenient. The easiest way to load is to basically leave the door partially open. With the door fully open you have to slide the silverware in sideways where it also tends to catch on other silverware. Perfect for 4 people. This was the best looking stainless steel dishwasher for the money. Whirlpool Gold Series.

Absolutely the worst hot water heater I have ever owned. Broke within first year which Whirlpool sent me a replacement valve assy which I had to install myself. That one failed in 3 month and unit was out of warranty so I received no help from Whirlpool. Had a serviceman fix it again and it failed again. So I ended trashing the unit. I would not buy another Whirlpool product as long as I live. The last 5 appliances I purchased from Whirlpool all failed within a few months after warranty expired. This is no joke. Everything they sell is farmed out to other countries than the US and the workmanship and quality is the worst I have ever seen. The service people are nice when they tell you that they cant help you with your problem. Dont waste another dime on Whirlpool! Very bad product.

I have a Whirlpool washing machine that have problem in dryer and drainage. I have registered my problem on 17 December and my SR number is DL 1211015017, but to date, the problem will not shout out. Its poorest response from your side. My machine is in warranty period.

When my wife and I were planning our retirement, we made a to-do list before we officially stopped working. We are loyal Whirlpool users and over the next 3 years we purchased 4 major Whirlpool appliances in preparation of having 8-12 years of problem-free time as we go from a two-income working family to two people on fixed incomes. I retired in December of 2011 and unfortunately this did not pan out on 2 of the 4 appliances. The washing machine, in late February 2012, blew a transmission 23 months after purchase and 11 months after the warranty expired. Discussions with Whirlpool by phone were unsuccessful in getting the repair covered.Ultimately, this repair cost us $265.00. In late April, 9 months after the warranty expired, the refrigerator iced up and had to be manually defrosted, despite being equipped with ADS. My family and I did the defrosting because it was a weekend and tech support was not available. On Monday, the refrigerator was functioning, so I was told to run it and see what happens and call the tech if it happens again. I had done research online and found many folks were having trouble with this refrigerator model and the main problem was the control board”, a board that is used in many Whirlpool refrigerators. I ordered one after the initial problem and waited for it to ice up again. On Sunday, May 20, it repeated the same symptoms displayed and I put the board in myself and it solved the problem. This computer board cost me $95.81.I contacted Whirlpool about the two premature, post-warranty expiration issues in hopes of getting some reimbursement for the repairs. The Whirlpool rep told me that because there had not been a recall on either appliance, they could not reimburse me. They instead offered me a 6-month extension on the dishwasher I bought last July. I have been on several complaint websites and have seen the refrigerator control board repeatedly mentioned - all within the approximate 2-year timeline as my control board failed. My refrigerator was a GB9FHDXWQ01 model, but the control board is used in many of their refrigerators. If this has happened to you, please contact me at ** and, hopefully, together we can get enough data to get a recall and get proper treatment from Whirlpool. Please include your refrigerator’s model number so I can verify the board is the one in question. Thanks.

In remodeling a house, we got all Whirlpool appliances for the kitchen, right when the lockdown started our freezer went out, 8 visits later from a local repair person, Whirpool will not honor the warranty and get us a new fridge!!! They just want the repair guy to keep replacing all the parts he has already replaced, the repair guy is beyond frustrated with Whirlpool and their crap!!! Never again, totally lost a customer here.

We purchased a new Whirlpool Cooker (Model Number YWFE745HOFH2) in June 2021. Our first disappointment came when we used the Self Clean function to clean the oven. Unlike our previous Whirlpool cooker (which we were very pleased with) this required us to put water into the bottom section of the oven. After the advised time the oven was exactly the same as at the start of the process. For readers of this review I would like to stress that the oven was not excessively soiled. We just wanted to try out the feature. In August my wife dropped a ceramic cup onto the cooker top and the top shattered completely. This, of course, was not the fault of Whirlpool, but we were shocked that the damage was so extensive. A new cooker top was ordered and arrived at the beginning of October (dispatch problems). After each use of the cooker top it has been cleaned with a recommended cleaning product. Today I accidentally allowed a pot of rice to boil over and, although I immediately removed the pot from the cooker top and wiped both the bottom of the pot and the top before continuing, the residue will not come off of the surface. It looks awful! We had our last cooker for over 10 years - if I could afford to I would get rid of this product tomorrow!

On April 10, I bought a Whirlpool washing machine with a sensor. My clothes do not come clean. The dirty spots are still visible. I had three technicians come to check it out and after they just made the machine start, make the water run, and make the water empty, they confirmed that it was working normally. I have insisted on having someone come and just do a small wash and they did not agree because they are not there to wash clothes. I went back to Leon’s where I bought it and the saleslady told me that she could not do anything about it. I have been dealing with the customer service and the person has tried three times to get someone to come and check the washer properly and was insisting in front of me that I wasnt at all satisfied with the performance of the washer and still confirmed that the washer was working fine. They keep saying that there are no parts that need to be fixed or exchanged, so that means there is nothing wrong with the washer. I have tried all different kind of soaps. They were suggesting that I use Tide, which was the best performing soap. I used Tide or Purex - I even tried half a bottle of bleach - and it would not clean my clothes. The problem is the clothes are not turning, they just hardly moved with water that just keeps the clothes humid. I tried putting in more water with a bucket and when I push the start button, it would drain out all the water that it did not put itself. Ive called the consumer protection and they have advised me to take legal actions against the company and the store that sold it to me. They confirmed that whatever we buy, the article has to do the work it was made for; so the performance of a washing machine is to wash clothes. I even took a three-year prolonged warranty and the store told me that once the one-year warranty with the company has expired, then they could help me with sending their technicians and see what the problem was and they would take it from there. I have an account with the store and I have eighteen months to pay it off. So I was wondering if the saleslady did sell me an appliance saying that it was very good and that I should not have any problems with it. Can I take steps going against her for false advertisement? It’s a month now that my clothes are not washed properly and I need to rewash them by hand before putting them out to dry. The consumer protection office has been telling me that the store should be the one to finalize the problem with the company, but it seems that not even they can come to an agreement. Whatever steps I will take against the company and the store, what are my chances of getting my washer replaced? Whirlpool has been advised about me taking them to court and I got permission to do so. Actually, they invited me to go ahead and do what I thought was right. I do not have the money or time to waste on something that maybe I will have no chance to get anywhere. All I want is to have it replaced with another washer that would be more performing. If anyone has had the same problem and had their case solved, maybe it will give me hope to go on. Please, what is the best and fastest way for me to get this problem resolved? I do need a washing machine. I do need to wear clean clothes. Thank you for your patience and understanding.

We purchased the Whirlpool model# BFG1J4040T3NOV 40 gallon natural gas hot water tank in the spring of 2010. The pilot light went out this weekend, 2011. And it will re-light but does not stay lit. This was bought at Lowes, rated as a 9-year warranty on the tank and parts. This is premature failure of a product that is listed as 9 years. Due to all the other similar complaints of this Whirlpool hot water tank, I would like my money back plus installation. I do not want the Whirlpool replacement as obviously it does not work. I will use a different brand and vet it much better in the future. We almost purchased at Home Depot but decided it would be a better bet to go with the Whirlpool reputation and name and Lowes than with the only Home Depot option, which is the self branded water heaters. It was a big mistake!

Four years ago, I purchased a Whirlpool refrigerator - French doors (ice and water in the door) and freezer bottom drawer. Against everyone but the HH Greggs salesmans advice, I purchased the extended warranty as I had paid a large sum of money for the refrigerator. Within a year, I began experiencing problems with the ice maker. Over the next few years, I had to have it repaired/replaced an additional three times. Add to the whole mess the incompetency of the A & E Repairmen that required at least two visits each time to complete a repair and their inability to arrive during a 9 hour window, I stayed livid about my refrigerator for three long years. Finally, I demanded a replacement refrigerator under the lemon portion of my warranty. After numerous arguments, the warranty company offered me several different makes and models to pick to replace my hunk of junk. Stupidly thinking that my problems were related to one bad unit, I selected another Whirlpool only to have it completely crash a little over one year after acquiring it. I lost the food in it and am having to wait almost a month for the parts to arrive and the repairman to return. According to him, it will have to be completely rebuilt. I will never, never buy another Whirlpool!

Purchased suite of appliances. 2 years later front burner will only operate on high (fire hazard). Fridge icemaker in door has never worked properly. No ice or shooting everywhere. Whirlpool offers no help because did not purchase pricey warranty & are nasty. Food freezes inside fridge & its my fault. Never Never buy whirlpool or any of their products KitchenAid Jenn-Air. There is a whole list!! They say made in USA. LIE. They are assembled in USA. Everything else is outsourced. No integrity from this company & definitely do not stand behind their products. Customer Service is non existent!

We purchase the Whirlpool Gold Dishwasher GU2400XTPB7 with our new home. This dishwasher has a plastic tub. For some unknown reason the dishwasher started to leak, I checked every hose connection and could not find the leak until I noticed four small burn marks in the plastic tub underneath the heating element. It actually looks like someone took a cigarette to the plastic. One of the burns went through the plastic tub, and this is where the leak is. Note: at no time did any of our dishes touch the heating element.I called Whirlpool customer service and they said they would send a technician out for $81 and in addition I would be charged $19 for every 15 minutes of service. I had asked to speak to a supervisor and he recommended that a technician come to my house at my expense and all the supervisor could say was that he was sorry, which became even more frustrating. No remuneration was offered. I have had other issues with our Whirlpool washing machine (holes in clothes), gas range stove (ignitron issues), and fridge. l will never purchase any Whirlpool product again including Jenn-Air. I made this quite clear to the supervisor. Whirlpools products and customer service are inferior based on my experience with our four appliances. It would be great if they actually practiced what their mission statement suggests, because as a customer I truly feel defeated.

They attempted to fix our fridge, 1 year into owning, claimed no parts available. Never fixed, fridge died. Refused to repair. Offered us a 15% Visa gift card on another Whirlpool. Unacceptable, they can’t fix their product, and will never recommend anybody go through my familys $3,500 wasted fridge experience. Don’t trust them, they lie, and just escalate it to another liar in the customer service department.

We had to buy a new fridge in 2000 because ours broke. Following consumer reports, we went with a side-by-side Whirlpool gold and was it pricey! Within the first five years of its life, we had to replace the fan twice...the bar that separates the fridge and freezer could have fried an egg--it was so hot! When I had to replace it the second time, I pitched a fit to Whirlpool and they could care less! Now I see that the inside wall of the fridge section has cracks forming! I know the average lifespan is 10-15 years but I still will say that I will not buy from Whirlpool anymore! Their stuff is very expensive and it just seems it has too many small things that do not hold up!

I bought my Whirlpool Cabrio (washer and dryer) in August 2007 ($1800 for the pair). I love these machines. I have only had one problem with it (I had to have a valve replaced - about $380, the machine made a screeching noise when it filled with water). Otherwise, I have never experienced any of the problems listed above. I bought this machine because I was pregnant and chose to do cloth diapers. I was doing nearly 20 loads a week at one point. Now, I do about 4 loads a week (would be about 8 loads in a normal machine). I love that the tub is HUGE and I can fit 2 sets of double sheets plus towels in one load. My clothes always come out clean and near dry.I wash everything in it - even dry clean only using the hand wash cycle. Prior to this purchase, my clothes were not clean. I could still smell deodorant in all my t-shirts and blouses. Not any more. Its the best purchase I ever made. Although, Ive always wondered why you have to clean a washing machine monthly when... well, its cleaning clothes anyway.

We bought a Whirlpool refrigerator in January at Home Depot. In July we started noticing that the freezer doesnt work. The ice maker doesnt work, everything melt away. Frozen items were lost. We constantly have to dry the floor since it is leaking water. We called whirlpool on July 27 and they send someone to check it out the following day. He reported that we need a new freezer door. I call for a follow up, I was told that it will take 6-8 weeks before we get a new door and part for the ice maker. We recently called to follow up on the status of the door just to find out that the order didnt get process until mid August. In the meanwhile, the fridge is having condensation. Water is everywhere inside. Fruits are being rotten because of too much moisture. We called again and they send out the same technician. The technician reported that the fridge will not work properly until freezer is fix. We call whirlpool again just for them to tell us to wait for the part, and gave us an extra 6 month warranty.

The washer constantly binds clothes around agitator. Truly a design flaw and it does not get clothes clean. So with a washer like this, I am forced to go to laundromat. Wished I would have paid 230.00 or so to have transmission fixed on old Kenmore. Truly dislike this substandard appliance.

Two years ago, I bought your new stove. It was under warranty. The computer is messed up. They came and they did not fix it. Warranty is off. It hasnt worked right since I got this stove. Who is going to make it right? Its only two years old. Fr2 v comes on when turn on. Oven have to turn power off to get it to work. This stove sucks.

Refrigerator model LFFU17F5HWD - For 2 years it worked, but with problems - always frosting over. I called a service tech and they said it was a common problem, but to find a service tech to come and look at it. The cost for that was $250.00 and still no fix. Now it quit working completely. I was always told by my dad that Whirlpool was the best - maybe true, 30 years ago. I know one thing if I have to buy another refrigerator - it wont be a Whirlpool. You do stand up to your name Whirlpool of trouble. If anyone reads this, please take my advice and do not buy a Whirlpool. I have a washer and dryer thats Whirlpool too. They work but I wont have anything in my house that says Whirlpool on it. Its too bad that they were a great product at one time. Consumer Reports should do something about this company or the BBB. Im so mad I cant even spell well. Thats my 2 cents on Whirlpool of crap.

I would like to share whirlpools lack of ownership for parts they knew were faulty that caused significant damage to my floor. Its absolutely horrendous that one would purchase the highest end dishwasher they offer (all highest end appliances in 3 homes so far) and the company is only willing to cover the replacement of the part. Its a horrible way to run a company. I hope that my review will warn prospective customers to stay away from a company who is only willing to take your cash at purchase (charging an arm and a leg no less) and not care about any repercussions after the fact. I hope they enjoy our 15k, because it will be the last penny they get from us.

The salesperson was great but we are not happy with our washer. We already had it swapped out once because of white spots showing up on our clothes. The only thing they could think of was that the bleach I used wasnt rinsing out completely so it showed up on our clothes. Recently, I washed a table runner by itself and it had some red in it. Now there are red spots on a couple of items that I washed after the runner. My husband just now asked why there were red spots on a shirt that he wears all the time. I explained. Also, we have had some white spots on clothes and I could scratch it out without leaving a permanent mark. Were no longer using bleach and we use only liquid detergent and all of it is HE. So I dont understand the machine. I hate it.

Our washing machine - as part of a stackable set - is two weeks beyond the one year warranty. Washer breaks down, I order the replacement part to find out - after waiting two months for the part - that the washer is now being discontinued so the ETA on the part is NEVER. Ask what Whirlpool will do about this and am advised that they will offer me a discount on a washing machine that does not fit on the stackable dryer. Or I can purchase a new washing machine at more than the original cost of the stackable set.This is a totally unacceptable situation. The washer is just out of the one year warranty period and it is already being discontinued??? Is Whirlpool making disposable appliances now so that after the one year warranty we just toss the appliance in landfill? Really? Unable even to purchase replacement parts to repair a one year old appliance? I will think long and hard about ever purchasing another Whirlpool appliance again.

DO NOT purchase a WHIRLPOOL hot water heater!! The gas valve temperature sensors on these units are faulty. Our technician has replaced several of these defective sensors. Costs $250.00 to install - water tank is only a year old! WHIRLPOOL REFUSES TO ACKNOWLEDGE THIS PROBLEM!! We bought this particular unit because of the reputable name brand. They dont live up to expectations. Dont waste your money on a Whirlpool - youll be replacing it soon! Very disappointed in this company!

I have had my Whirlpool W10280546B HE washer for 1 1/2 years. For the last year, I have had constant problems with the washer leaving a large amount of residue (in spots) all over my laundry. I have always run my washer as instructed, and I only used HE detergent in the correct amount. This residue appears to be fine lint, but may be lint combined with detergent.I have used the washing machine cleaning tablets and powders, but this has not helped at all. No one seems to have ever heard of this problem. I have to clean off these spots which cover approximately 1/3 of each article with every washing. The dryer helps get some of it off, but not nearly all of it. Any suggestions besides buying another washer of another brand after only 1 1/2 years?!

Whirlpool is a very good company and their products work very efficiently! If I had a choice to choose in a different type of washing machine I don’t think I could choose. Whirlpool is very reliable. Their older machines as well as their newer machines! They last pretty long. The dryer is dry very well as well as the washing machines agitate your clothes to get them clean.

Whirlpool washing machine was not a good buy at all specially after using it and seeing that over the years I had to incur high costs of maintenance. Over the months and years of buying Whirlpool front load washing machine, I had to replace motor twice, digital display twice, motherboard twice THAT TOO at a very high price every time something broke. This time the angle that supports the drum broke and Whirlpool says drum needs to be replaced. HOWEVER, after waiting a month company says DRUM IS UNAVAILABLE. Which means my machine has become absolutely useless just because Whirlpool does not have the spare. Whirlpool has a ridiculous track record with poor service and poor product quality. Manufacturing in one country and selling it in another WITHOUT SPARES is defective and poor service, totally unreliable. Wouldnt recommend Whirlpool to anyone.

We have had this range in our new home and in use since May, 2019. The first range had to be returned after its first use due to flaking of the interior walls; a problem the company acknowledged. Since then we have been so unhappy with its ability to maintain the oven temperature. Contrary to the instructions, we calibrated the oven temp and found that it would vary up to 20 degrees lower than the set temp. When set to 350, it would come up to that temp and then cut off until it fell to 330 when it would come back up to 350. That is a great differential noticeable in the time it takes to heat an item and which greatly affects baked goods. A similar lack of consistency in control in the range elements is apparent as well. Now those are major defects. Minor defects are: it is NOT a rapid preheat at all, both lights are on when the switch is engaged even though only one oven is in use, there is no clock function when the timer is in use and the range surface is difficult to clean as it streaks which is visible with the black finish.

The first thing I noticed after purchasing this stove was that the glass top did not clean properly. I used the product given to me by Sears and tried several others but still could not take marks off of the glass top. I never really used the oven that much until retired and started baking often. The self clean does not work at all unless by self clean they mean that you yourself cleans -- I should say scrub it down. I previously had a regular self clean and it truly self cleaned. All I did was take wet paper towel and wipe out. Yet when I asked the Sears saleswoman about how it cleans I was told that it was terrific -- I would not have any problems! What a laugh!

Does not clean clothes as well as I was told it would. Very dissatisfied with the price and performance and would not recommend this brand to family members as well as friends. With the way the current economy is, companies like Whirlpool should reduce their prices!

We bought our Whirlpool Refrigerator a little over three years ago. Within a few months we started having problems with the unit. From ice maker issues, cooling and freezing. Initially the frig was covered under Whirlpools 1 year warranty. Then our extended 3 year warranty kicked in through HH Gregg which they supplied for free because of their poor handling of the initial sale. We have lost track in how many times a repair man has come out to work on the refrigerator. In the last year alone its been at least 8 times. The most recent problem had been the freezer not defrosting properly to the point where we had to store food in our neighbors freezer. The repairman has tried everything he knows and is stumped. Well our extended warranty has run out but theyll continue to work on the problem as long as we report the issue within 30 days which creates a whole different set of issues. The extended warranty states they will replace the refrigerator if it has the same problem 3 times. However what they dont tell you is that if you call BEFORE 3 time period its considered a recall and that doesnt count towards the 3 strike rule. We contacted Whirlpool and they wont cover the refrigerator because the repair company isnt on their approved list. Really a Sears repairman isnt approved? So buyer beware of a lemon Whirlpool Frig! They seem to have a way of not covering their product.

My stove is great. The only thing I would change is one more big eye. Having two big eyes would really help. I also love the oven although I have to pay attention because it heats on the hot side. A cake will be done in 18 min instead of 20 or 25.

I purchased a Whirlpool upright freezer from Sears 17 months ago and it stopped working. I find the warranty is only 12 months. I contacted Whirlpool and they left a message on my answering machine that they would not be allocating any funds for the repair of this 17 month old freezer. I spent in excess of $600.00 and I am highly disappointed. I would never buy another Whirlpool anything.

My 4-year old Whirlpool Cabrio (model WTW6600SW2) has gone out. It cost almost $300 just for the part to repair. It was lightly use; the average use was about three-four loads a week. Thats almost half the cost of what the whole machine will cost if new. I am irate. The customer service was no help. I will never buy another Whirlpool product again..

Whirlpool top loading piece of junk! I would give it a zero star review if I could! Do not buy this machine!!! I agree with many other reviews. It doesn’t get the clothes cleaned and now a completely doesn’t work. We reset it, we’ve had the service guy come in and replace a bunch of parts on it. It’s past its one year warranty and doesn’t work anymore. Piece of junk! Junk, junk, junk!!! Waste of money. Do you not buy the Whirlpool tub loading washing machine!

First the ice maker stopped making ice and then the freezer stopped freezing. The unit is 2 1/2 years old. Whirlpool wants $1800 to repair! No Way. Purchased a Samsung and hope I do better with this one. So little to be praised about this American brand.

Buyers beware! I have had the Cabrio top loader washing machine for less than 18 months and it is already giving me problems. During the wash cycle, it sounds as though the gears are grinding to the point it wakes my family up two floors up! The spin cycle is a joke. The washer sounds as though it is going to spin off into another room! When I called Whirlpool, they told me to shut the circuit breaker. That might reset the computer. No go which I figured as much. I have had washers that lasted 10 plus years with no problems. It is not worth your time or your money. Never again, Whirlpool!

After having 7 refrigerators breakdown all for the exact same exact reason, a $12 part, Whirlpool will only take the stance that you could have bought the extended warranty. So theyre happy with you spending $150 each time the repair guy comes out. 7 refrigerators all for the same reason and theyre only 3 years old. Do you really want to purchase a Whirlpool product after that? We are a development that has furnished are condos with Whirlpool but will no longer.

Whirlpool slide in range, microwave, dishwasher, KitchenAid fridge: All appliances, stainless finish, were bought with my home in October 2006. Range - Within the first year, I had problems with the outer plastic pieces breaking, the motherboard and the oven and broiler not working. The screws holding the knobs on fell out several times. The oven door was fixed several times this past year until finally it fell off and broke for good and now the oven does not work at all. Microwave - The rotisserie motor stopped working this past year. Dishwasher - Just after the first year, the outer shell of the door came apart. KitchenAid fridge - Within the first year, the temperature adjuster broke. The second year, the ice maker stopped working. This year, the ice maker broke again and the motor quit working twice already and all has been repaired. The freezer handle has fallen off as well.

Bought a $2500.00 fridge in Dec. 2012. By July, we were dealing with our 4th repair. Customer service in warranty department is non-existent. They act like you are a bother and have no right to demand replacement. I sent an email. No response. I wrote a letter to Corporate. No response. Not until I made comments on Facebook. Then I get a call offering me an extended warranty (which I already had purchased) so they said they would give another year (total of 3). This was a few weeks ago. I still have yet to receive anything or hear anything. This morning, our fridge is on the fritz again. I am loathe to have to deal with them again, but have no choice. Its either deal with them or throw out the 8 month old unit and buy something else. I should not even have to consider that. Whirlpool is a huge company. I do not understand their reluctance to just replace a product that is obviously defective unless they have no confidence in a replacement unit. This is so frustrating and upsetting to me. I did my research. I thought I was getting a quality product from a quality company. What a disappointment.

I absolutely HATE my Cabrio washer/dryer. I cannot get the mold smell out of my clothes. The clothes come out dirty and smelly. I have no idea what to do about it. It was a huge sacrifice to purchase these and a complete waste of my money. Whirlpool - please stand behind your products and take it back! Worst purchase Ive made in years.

We purchased our new Whirlpool Cabrio washer on November 1, 2013. From the start this machines performance has been a disappointment. We bought the machine at The Brick (I should have known better) where we had made several purchases over the years ( I guess Im a slow learner). Right off the hop, my wife and I noticed that the clothes were not coming out clean. Even though the machine is Eco and therefore advertises that it uses less water, there should be enough water that the clothes at least get evenly wet. That may be a problem with the agitator not seeming to have the guts required to pull the clothing down to the bottom of the drum. We went back to The Brick and told them that we were not happy with the machine they had sold us and quite predictably they told us that we should call Whirlpool (This was less than a week after we had it delivered. Did I mention that I may be a slow learner?). We called Whirlpool and they told us they would have a tech out to take a look at it on November 11th. Wow, I thought. Hows that for service. A repair guy coming out on a statutory holiday. Of course it didnt happen. When we called them back to ask if their repair guy had made it home okay, they claimed that we werent there when the repairman tried to call to confirm his arrival time at our home. We hadnt left the nest the entire day. They then told us to go back to The Brick. We went back once again and told them, yet again, that we were not satisfied. This time they agreed to send their own man over to take a look. He came over yesterday and watched the machine go through an entire wash cycle and then said that there really wasnt anything he could do, as even though it may do a crappy job of washing the clothes, it at least appeared that mechanically speaking there didnt seem to be anything wrong with it. We called Whirlpool back today and they said that there isnt anything wrong with it mechanically so from their end, at least, the story is over. What kind of customer service is that????? Maybe Whirlpool and The Brick deserve each other, but I think we should get better treatment than that

My landlord purchased a new Amana washer (NTW4605EW0) Labor Day weekend 2015. It started having issues in the spring, so we went through the process of utilizing the manufacturers warranty. Apparently, Amana, part of Whirlpool, requires 5 attempts at repairing the machines before replacing. Okay, so starting in June 2016, we arranged service appointments 5 times and replaced 1 part, then another, 4 times. Clearly, that part is defunct. Right? Fast forward to September and then into October. Get a new washer, and not the one I preferred. We got the Whirlpool WTW4816FW1. Before the installers leave, we are having the SAME issue. Stops midcycle, doesnt finish cycle, sometimes stops while filling, or while full, or kid wash, or mid drain... But now with the new washer, the drain and spin cycle thinks it should FILL instead of drain... and Whirlpool said they would get someone out the next day, a promise they cannot keep because they dont supply the repair guy, they source with local companies. So, the company ordered 3 parts... That could be the problem. And 4 days later, 2 parts are on freaking BACK ORDER. Parts arrive. All new parts replaced. Machine still doesnt work. Outlet tested by us and them and it is fine. The techs think there is some kind of RF interference. Turn off sensor light, which is on the same wall, unplug power to wifi router (which outdates the washer). Still, doesnt work.I have spent half my week, every week, since June, restarting my washer, unplugging the damn thing, waiting, and waiting, trying again and again and again to wash 2 loads of laundry a week... Literally takes a week until the damn thing does its job. Whirlpool is sent us a replacement washer. Can you guess what happened the first time we started it? SAME ISSUE. Cycle will not complete. Sometimes it dies before it even fills. Sometimes it dies while filling. Sometimes, it will fill and fill and drain and fill and fill and drain and... never stop filling. Or, the fun one, the drain and spin cycle thinks it is suppose to fill. Continuously. And then, suddenly, after unplugging it for 1 hr, or 24, or 72 hrs, it will work fine for 1-7 cycles. Nothing is consistent except that it doesnt work consistently. HAS ANYONE HAD THIS MUCH TROUBLE???

We purchased a Whirlpool hot water heater approximately 4-5 years ago and have had problems with the pilot staying lit. I contacted Whirlpool and their trouble shooting included doing a draft test (I am a teacher not a plumber) and removing the closet door that houses the unit. I am very frustrated by this entire ordeal and would like if they would replace the entire unit. At this point I dont want another Whirlpool product. The plumber made a service call at 12 noon and by 3:30 we had luke warm water and by 6:00 pm the water was ice cold! I will never recommend any Whirlpool products.

This refrigerator is a disaster. You will never be able to leave your home for any length of time for fear of a storm putting your electricity out which turns it off and if it DOES NOT TURN BACK ON WHEN THE POWER IS RESTORED. If you happen to be away for several days you will come back to a freezer that has defrosted all over your floor and your food in the refrigerator spoiled.

Bought the model before this just over 2 years. Conveniently it broke just after the warranty expired. I chose not to buy a extended warranty as my last fridge from KitchenAid is over 20 years old and never had a single problem with and still operates like NEW. I can’t say that for my Whirlpool which was very expensive. It has been with an issue within the ice maker for over 8 months. Every computer board has been replaced twice with no fix. Then tried to replace the cooling fan within the ice maker unit seven times. Whirlpool could not find the right part, as the wiring had changed mid model and have no record of when it was changed and what models affected.Certified Whirlpool technician was great and so apologetic. I had taken 7 Mondays off to meet him to only have the wrong part time and time again. Whirlpool support tech line basically said he was wrong, yet I witnessed all visits and my 3 plug fan unit did not match Whirlpools newer part that was 2 plugs. I was not happy missing so much work because Whirlpool is incompetent. Finally my tech ordered a whole new ice maker, including the cooling fan. Lo and behold, Eighth time, parts did not match. He again called Whirlpool tech support and reordered another set one final time. Another Monday to find that this time the parts did fit, but cooling fan still did not work. He called Whirlpool tech support again. They started to trace wires one by one.Whirlpool tech support said it was a bad or broken wire somewhere in the cavity of the fridge buried in insulation and was not replaceable. In other words I have a $3000+ refrigerator that is useless. Whirlpool said they would replace the unit. But when I called, they said since I didnt have an extended warranty, they would prorate it and it’s going to cost me over $1000 of my money to to replace due to a manufacturer wiring defect after only 2 years. What the Heck, I was willing to pay to fix it, but Whirlpool can’t fix it. Don’t buy a Whirlpool product as they are Junk and do not stand behind their BRAND!!! No matter who I talked to, they kept falling back to their word track of it’s my fault I didn’t get an expensive extended warranty, yet they can’t fix a wire they installed incorrectly.Wires don’t just break after 2 years. You get longer warranties for cars for the Love of God. I asked them to just send me the money they were willing to put towards a new Whirlpool fridge, so I could buy a Real Brand that stands behind their products like KitchenAid. Of course the answer was NO. Buyer Beware, don’t buy a Whirlpool anything. Did I mention my Whirlpool certified technician was having a Whirlpool dishwasher issue that Whirlpool can’t fix and that’s his profession. Same type of response. Don’t Buy Whirlpool Products, they are Junk and you will get No support from Whirlpool!!!

On the 27th March 2012 I bought a new Whirlpool 6th Sense washing machine S/N 411048002028 AWOE 9210 - 30 9Kg for E499.00. I brought it home and plumbed it adding in a lime filter on the water line to protect it from limescale. On the 14th September 2016 a service technician replaced the entire drum as the old one made so much noise and the ball bearings are part of the drum. On the 7th June 2013 a technician replaced the drive belt claiming that it moved if a light load was put into the machine. On the same day I added an extension of 3 years Guarantee at Euro 89.00. On the 14th October 2013 a technician examined the machine for a water leak but found nothing and charged me for the call. Out E25.00. I lived with the noise of the spin cycle ever since. The noise got steadily worse until 27th September 2016 when the machine finally packed in. I stripped the machine down to find the ball bearings on the drum completely rusted over so the drum was rotating without the cushioning. On the same day I bought a Bosch machine and decided to forget about the extra guarantee as the offending parts had already been replaced once and did not even last 4 years. I will bring it to the recycling yard later today as that is all it is good for. It was bought in Media World, Orio Center, Bergamo. It was paid for by Gianni ** who is my father-in-law and had a loyalty card for the shop.

This dishwasher, compared to my old one, is very quiet but does a very poor job of cleaning. I now have to prerinse most all items. The silverware rack leaves many dirty items such as peanut butter off a knife. I probably waste more water on prerinse than what is saved by the washer.

I purchased a Whirlpool water heater with the Flame Lock Safety System on 6/4/12. When installing the water heater, the cold water pipe would not screw into the top of the water heater. I exchanged this water heater for a new water heater of the same make and model. I brought this water heater home and had it installed and noticed that the flame on the burner was orange and too high. I called the 877-817-6750 number for warranty and was told by the customer service rep that it was either the gas regulator or the orifice inside the water heater. I was told to contact a plumber to take care of this issue and it was not a warranty claim and not their problem. I then went to the Lowes store where I purchased the unit and spoke to a manager. The manager called the same number I called and was told the same thing, that I was responsible for the repairs to the unit. How can this not be covered? Both pieces are internal to the unit and were never touched during installation. I now have to remove and return this unit and install a new water heater that will not be a Whirlpool at my own expense. Do not buy Whirlpool.

For the second time in 18 months, I have had to replace the top shelves on my refrigerator (Model #ED5VHEXVB01) because the cheap plastic borders have broken. The first time it was covered by the 1 year warranty, but this time (12/11) Ill have to pay $130 just for one shelf. Unless the quality of the product has improved, Ill probably expect to have to replace them again within the year. Needless to say, Ill never buy Whirlpool products again. Im out $130 because Whirlpool will not replace them for free because the product is no longer under warranty.

Whirlpool stove and dishwasher very good quality. I find that the quality is beyond excellent for the amount of money. I would highly recommend Whirlpool. Easy to clean, heats up fast, looks beautiful. I would never change Whirlpool for anything else.

I purchased this washers predecessor, the WTW6200 in May of 09, along with the matching dryer. The bearings gave out after 36 months of use, and our household comprises two adults in their mid-fifties. Estimated cost of the repair? $650! Why am I posting this here? Because two weeks ago, my daughter-in-law called to say that shed so liked my machine when she visited in 09 - Id had the thing for two weeks at that time - that shed bought the WTW8500B and... the bearings were already giving out. I suggested she get the thing repaired, sell it immediately and replace it with an LG product, which is what Ive done.She has been put on a three-month waiting list for the repair, confirming my feeling that Whirlpool, as a whole, has gone down the tubes. Their service record is dreadful, with an excess of 20K complaints existing at various consumer agencies regarding ALL the Cabrio line, and their warranty, Ive learned, is considered the worst in the industry. All in all, the single worst purchase of my fifty-odd years.

We got a DEAL for this nightmare for nearly $700 back in 2014. Nothing but problems. Constantly finding plastic pieces at the bottom... some identifiable; others not. They are from the cheap parts within. The control board lights (all but 1 works) went just after the 1 yr mark. We are now having to replace the top Rack Adjuster (MORE CHEAP PLASTIC), as it has been barely hanging on for the last year and a half... constantly fighting it, as it would drop all the dishes if you moved it wrong.Now, the water is not draining at all... period. We clean this religiously - always rinse dishes completely, use rinse aid, never stuff dishes. Today we find a random plastic piece, which we are now trying to identify. NOTE: we dont put plastics in the dishwasher. So, today a new plastic piece and major drain problems. We are in the market and purchasing a new French Door Refrigerator and Front Load Washer. Will NOT be going with anything Whirlpool. Not much better these days, but this name has a big RED NO for us. Made it even worse when we contacted for help after that 1 yr mark. NO HELP AT ALL.

Size was greatest consideration, then cost. Next was power consumption. Quality claims were of no value, since ALL are made in China/Korea. Korean made would be a better choice than China. Am satisfied, but not greatly, as refrig. bottom freezer died a few days out of warranty. YouTube video had my exact refrig. so fixed it myself. Bottom freezer drawer keeps coming off its slides, but I live with it. Top refrig. section freezes things on top shelf, but 2 and 3 shelves down, temp is 39 to 42 = cannot get even temp. As a former inspector, I know about air circulation, crowding.

Bought a Whirlpool fridge in a package from Home Depot three years ago. The fridge has already stopped working. It started having issues about 1 1/2 years in to owning the fridge and finally died 2 weeks ago.

My parents bought a Whirlpool washer machine and the machine was fine for the first two years, then water started leaking from the bottom of the machine and no one has yet to fix the problem! They have the worst customer service department. The A&E worker who came to my parents house smelled, wasted a bunch of time working on the machine and didnt fix anything! The A&E worker visited my parents house over 10 times and the problem still wasnt fixed! They (worker) have ordered parts after parts and still water keeps running from the bottom of the machine! Someone, please help and cut Whirlpool from the stores! Ive spent almost a whole on the phone trying to help out my elderly parents! Its ** and a lot of headache! Never use Whirlpool; theyre all crap!

March 18, 2018. I was called today to inform me that the right front burner on my new stove Model # WEG745H0FS0 (ordered in early September and not delivered until mid-October from Menards) was not operating properly. The flame was noisy and yellow. I inspected it and found that the front burner base was substantially damaged by heat. See photo (Whirlpool stove part damage1). On inspection of the other front burner base, I discovered early signs of the same problem. (Note changes on burner base on the left of the photo.)In this photo (Whirlpool stove part damage2.JPG), you can see the damage to the burner base and also see some changes on the 3 to 5 O’clock position on the burner base on the left of the photo. This stove is less than 6 months old. The fact that the burner parts can be melted indicate poor design and danger to the owner/operator of the stove. Further, the operators manual for the stove I bought does not include any information on the model I have. It has pictures of the range top similar to mine but the model number is completely different. In addition to this, the Aqua-Lift Technology for cleaning the oven is completely ineffective. This is noted in several other reviews of this equipment. The problem noted by the other review became obvious the very first day I tried to use this range. A 2 cup pot spilled all over the cooktop as soon as I put it on the grate.

I have the Cabrio model WTW6400SW2. I have had it for 5 1/2 years and have been happy with it up until several months ago. The F1 would come up when the machine would lock and just start to fill. I could pause it and start it again, and it might do this 1 to 3 times. It would also do it on the rinse cycle. I have been using it because I did not want a repair bill right now. The machine was also starting to make noise when it was spinning. Well, I just happened to break my dryer yesterday so I thought I would get the washer fixed also. Well, the repairman said that the controller would cost $200 for the part, and then he said the pump roller and bearings were going. By the time you add on labor, he said, “You might want to buy a new one.” He told me that Whirlpool has completely changed the washer now because of all the problems with them. He told me to look it up on the computer, and maybe there would be a class action suit. After reading some of the reviews, I will not buy another Whirlpool again.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I purchased a Whirlpool fridge in September of 2015. In March of 2016 I noticed the Fridge portion was getting too cold. By April 2016 the freezer stopped freezing and fridge started warming up. I reported the issue to Whirlpool and made an appointment. The day of the appointment the first company called and their tech couldnt make it because of a family emergency. They sent another company out instead. That company diagnosed the issue as a faulty chiller and ordered the part and told me they would be in touch. A week goes by with no working fridge and I call them. They say it will be another week for the parts. Two weeks go by - no call. I call them and they say they have the parts and I make an appointment.The day of the appointment I call them to find out what time they will be out and they tell me they dont have all the parts. And when I mention that I have been without a fridge and that I am frustrated that they arent calling me and that I am having to call them back the lady starts yelling at me asking me if I want to cancel my appointment. So I call Whirlpool and ask for another company. They send a company out that is not trained to be working on a sealed unit. So I call Whirlpool back again and they send an in house tech out three days later. This is over about a month without a fridge at this point. Their tech simply recharges the system and says that it should be fine.A week later the freezer stops freezing and the fridge warms up to the point that both are not usable. The tech comes out and diagnoses that there it is most likely the chiller because of a build up of frost in the freezer. Orders the part and a week and a bit later I call Whirlpool up to get an ETA on the parts. They say they have the parts now (no call??) and they schedule an appointment. The tech comes out and puts the part in almost a week later (2 months now) and says that it is still building up frost in an area that it shouldnt and calls tech support back and forth for the next two hours. He leaves saying give it some time to see if it works, but admits to me that it is likely it is leaking in an area that he cant access.So I call up Whirlpool and explain the situation and ask for a new Fridge. It has been two months and the tech by his own admission could not say he fixed the problem and thought the problem maybe somewhere else. After looking at my case and me being on hold back and forth for about a half hour the supervisor says that at this time I need to wait to see if it fails again. And that if it does I need to have a tech back on site to verify. So this will be the seventh time I took time off work, it will be the fourth time the fridge fails and that I will have to throw out groceries. When is enough enough. I am into this now for almost double what the fridge is worth in lost wages and groceries.Do yourself a favour and stay away from Whirlpool!!! If I have to guess the following will happen: five days from now the fridge will stop working again (when the Freon leaks out - same timeline as previously) and then I have to call for a tech (3-4 days) and the tech will come out, determine that it isnt working. I have another conversation with a supervisor asking for a new fridge and they miraculously agree (yeah I know). Then what two weeks, a month... before I get a new fridge. I anticipate that I will have been without a fridge for 3 months before it is all resolved. Ridiculous is all I can say. Whirlpool should be embarrassed.

Ice maker kept freezing up. Im continually taking the ice tray out to unfreeze. The frequent removal of the tray eventually broke the tab off on the liner. Ive now been told this (liner) is not a replaceable part and since that is the case, the warranty will not cover. Im upset that the repair technician did not process the claim properly and state that the make had a problem freezing. What kind of company would manufacture a product that would have parts that are unrepairable? You spend close to $2,000 on a refrigerator, wouldnt you think you would have an ice maker that works? I know they hope to sell more appliances this way but you can bet I will not be purchasing another Whirlpool anything! I will also be retracting my recommendations to friends and family to purchase a Whirlpool. The company does not stand behind its products.

I bought a new top loader Whirlpool washing machine. Water would not drain enough so that the clothes could be dried in the dryer. It does not have the thing in the middle that you put your clothes around. My clothes get tangled together all the time. A repair person came and said that I needed to load the clothes in a different way. Different from what the salesperson told me. Still tangled and still not dry enough to put in the dryer. I have to use the drain spin cycle every time!!! My dryer still takes 120 minutes to dry a load!!! Second repairman comes and tells me I need a new computer system and I will have to use the laundromat. A month later they tell me they cannot get the computer and will replace the machine which is still brand new. Bring new machine and my clothes still will no spin enough so that they are dry enough to put in the dryer!! So sick of this and will never buy another Whirlpool product again!!!

WRF993FIFM00 refrigerator is a LEMON - I bought my $3000 refrigerator just after Christmas. In seven months, it has failed three times and I have been without a refrigerator for a cumulative 7 weeks so far. Each time it failed, I lost all my food, (but not until after wed been eating compromised food). If you buy a fridge, I strongly recommend getting a thermometer, because we learned the hard way that these Whirlpool units can just stop cooling properly and you wont necessarily notice that it is above the FDAs recommendations for food storage. Anyway, after each call they will make an appointment a week or two out for a tech to come out, who then orders the parts that take weeks to come in. Now, my third service call in and the SAME PARTS have failed again and I am again without any refrigeration and they have no idea when the parts will be in. This has been an awful experience, and Whirlpool could not care less. DONT buy their products, under any of their names. IT IS TIME FOR A CLASS ACTION LAWSUIT. Too many folks have spent a lot of money and have been burned by Whirlpool, not to mention becoming ill from improperly chilled food!

The Whirlpool Gold Series we purchased, to replace the older refrigerator, has far exceeded our expectations. The French Door setup was exactly what my wife had talked about. The saleslady at Home Depot, where it was the least expensive by $283, was very well informed. We went through the specs, colors, types of finishes, etc and picked the perfect one for my wife's needs and wants. The model performs well fully loaded or almost empty. She told a few family members and they went out and bought the same model, or next model up, as we did. To wrap it all up, "Buy this. It performs as well as, if not better, than all the rest."

Purchased 03/28/13. Refrigerator 62 degrees on July 4, 2013. Called for service July 5 - came out July 9 and told unrepairable - wiring harness set against tubing rusted and broke wires. Since July 9, I have been trying to get my replacement from Whirlpool and always told they will call me 24-48 hours - never calls. Asked for supervisor on July 22, then asked for her name and direct number. Supervisor said someone would call me about delivery. Supervisor told me if a local store would have had in stock, they would have sent it out from there (called local store and was told 6 were in stock and could be delivered tomorrow). Tried to call supervisor back to inform her, but number would not go through (apparently bogus number). As of July 22, 2013, still no refrigerator. Very poor customer service/service repair. July 24 - asked if I needed to get an attorney and/or contact local new consumer advocate - Whirlpool said they would issue a refund check for the refrigerator, and that I should receive it in 14-21 business days - said they could not refund on credit card I used to make original purchase. Hopefully, the check will arrive.

I was under the impression Whirlpool washers were good. Mine always goes off balance and quits. I carefully redistribute the load several times to get it to finish (start over). Sometimes it works fine from the get-go, but not often enough. It is now 2 years old and if I were wealthy, Id shove it to the curb. There is little to like with an appliance that often must be adjusted and re-started. I will try Samsung next. It seems that American brands are not reliable. I have no special needs and will consider reliability above all. The name Whirlpool would be a deal breaker for me. I cannot abide my Whirlpool washing machine as it is more of an aggravation than something useful. Stay away from Whirlpool washing machines. They (at least mine) require the load to be balanced to a microgram. Appliances should just work and not require fiddling with.

We purchased a Whirlpool upright frost-less freezer (model # EVL201NXRQ05) in October of 2008. So, you see, it is not even four years old. A few months ago I noticed that some things in the freezer were very soft. I looked at the back of the freezer and there was some ice buildup around the area where the coils are located. I took everything out of the freezer and removed the panel over the coils. There was major ice buildup on the coils. I completely defrosted it and dried it out. I restarted it and it seemed to be working okay. But a few days ago, when I got something from the top shelf of the freezer, it was not even frozen. So, here I go again. I removed everything from the freezer and have defrosted it again. However, this time, as soon as I turned it back on, the ice started building up on the coils immediately. It is impossible to contact anyone at Whirlpool that gives a crap. We have also been having problems with our Whirlpool Gold refrigerator. We have spent over $250 on it and it still is not working properly. I would love to just throw them in a ravine, but we have spent a lot of money on these appliances. We thought that Whirlpool was supposed to be number one in appliances. What a huge mistake we have made and it is costing us dearly.