We purchased a Whirlpool Cabrio for $1,100 because it was the largest capacity washer in our price range at the time. It has had very little use as I typically take my clothes to the laundry mat since it is anything but large capacity. I have always had problems with the buttons malfunctioning but I went to empty a load and the water was still standing in it - I got code ld and realized that the entire tub had broke off and dropped into the bottom of the machine. Where is the class-action law suit? I want to be the first name on it. I dont have $1,100 to waste on junk. Whirlpool should be ashamed.

A reliable machine at a very really good price. A nonsense machine that does a very good job at cleaning our clothes. Has a good number of features that make washing different materials easy and safe for their fabric types.

Found a crack under a freezer rack from sidewall to back wall. This has caused the refrigerator not to operate properly. Every appliance I own is whirlpool. Bought in 2005. Also bought another in 1994 that is working fine. What surprise me is having a crack in freezer wall. Nothing Whirlpool can or will do! Was a lifetime Whirlpool CUSTOMER. GUESS WHAT? FACEBOOK I GO. 3309 FACEBOOK FRIENDS.

Purchased a Whirlpool French door in April 2020 during the pandemic for 2K. The first week of owning it my fresh vegetables froze. I lowered the factory set temperature by one degree. The next week the ice maker stopped making ice. 3 days later it started up again. The 3rd week my freezer food defrosted and the ice maker stopped making ice. Called Whirlpool And requested a refund. They said, No we will send a tech. The tech determined the control board was defective. I had to empty the entire fridge and turn it off, defrost it for 24 hours. The headache to find someone to take your food! The part took 2 weeks to get replaced.The tech said, If this doesn’t work we will have to come back and take the back off to see what the issue is. Told to defrost again for 24 hrs. The ice was so thick we did it for 48 Hrs. 1 week later ice started to form in the freezer and the ice stopped working again. Called whirlpool demanded a refund and they said no. A tech will come again. I’ve relocated my food 3x already. How many more times can I do that! Whirlpool is not concerned about their reputation at all, as I read through other reviews of situations similar to mine. Do not buy whirlpool!

Bought this refrigerator in June 2018. Had issues with freezer section and service technician came July 19. Issue was resolved but only temporarily. Had another technician come in Oct 3 and was told he had to order a new freezer drawer which should take 3 days. Now being told the drawer won’t arrive until Nov 15. You call that service? It would have taken less time to get a new refrigerator. I would never recommend buying Whirlpool products to anyone. What’s the point in buying a product that you can’t get proper service on.

This washer has been a lemon since the day we bought it. Always leaves marks all over dark clothes. Had to have a part replaced before we owned it a year & repairman from the company said they have to replace that same part every time they go out so they carry them on the truck. Latch broke after owning it for less than 2 years & now it no longer spins water out of clothes. All this & we havent even owned it 3 years. I had a GE washer for years when I first got married & had children. Never had problems like this. Paid it off on Monday & on Friday it became a piece of junk. How is Whirlpool getting away with this misrepresentation? I dont even see how they can call it a washer.

The washer in this set is my biggest complaint. I have followed all instructions and tried different methods time and time again and the clothes never come out fully clean. I too experience all the other complaints on this site as well, stuff still left on clothes, dry spots, stains not removed after being pretreated etc. I did some research before buying this set and saw some good reviews, dont know who wrote them but obviously they were highly inaccurate. This is my biggest purchase regret ever, as this set cost about $2500, so disappointed.

In October 2009, I purchased a Whirlpool Energy smart gas water heater with flame lock safety system.$509.00 I had it installed on 5/4/2009 by Westmoreland Affordable Plumbing, $218.00. On 10/15 called Whirlpool stating that the upper thermistor was coding as a failure. They sent me another one to replace it on 10/19/2009. On 10/19/2009, 1 and 1/2 hours later, the tank was coding a bad gas valve, called back and told Whirlpool what had happened and that I smelled gas. I shut off the gas to the water heater and waited for a valve replacement to arrive. On 10/21/2009 I had E.H. Plumbing to install the new gas valve to the water heater, $150.00. On 10/28/2009 the new gas valve went bad. I contacted Whirlpool and argued with them until I had them replace the hot water tank. With their approval I went to Lowes and tried to get the same water tank but they no longer sold that model anymore. I was given their equivalent to the one I had purchased earlier. I had it installed on 10/29/2009, $150.00. I now see a class action suit was filed against Whirlpool for the model in 2008. They were still selling this model after the lawsuit???? I spent $1027.00 for a $509 hot water tank and a lot a days without any hot water. I have all my receipts and returned codes for this transaction. Is it possible to get my $300.00 back (for two extra installations) as a result of this problem? I also kept the old gas valve thermostat.

We bought the over-the-range Whirlpool microwave, model #WMH53520AH-1, about four years ago from Pacific Appliance Sales Kitchen and Home inside a Best Buy store in San Diego. The Magnetron and Diode have malfunctioned and been replaced. Now the plastic around the door is falling apart, cracking, and splitting. This is unacceptable, poor craftsmanship, and low quality for the price of this Whirlpool appliance. This needs to be reported to the company and properly addressed. Until then, were staying away from any Whirlpool related products. We also own Cabrio W/D. The washing machine has had problems from year one. Im submitting a separate review for this appliance. Consumer beware!

Purchased a new Whirlpool washer and it has the sensor-- like I am too stupid to decide on the level of water to match my load-- not sure why I got an agitator because I am the only thing it agitates. The clothes just sit there in its own filth and then go in the dryer. Actually put a stained item in the wash to remove the stain and instead it just spread to other clothing and has stained and possibly damaged them. Washing the same clothes 3 times is not saving energy, water and time for me.

I purchased my first Whirlpool washer in 1959 and have been true to the brand since. This was a big mistake when I bought the WTW4950XW0. At first I thought it was the learning curve on my part with the new technology. The very first wash load was dry on the top layer....never got wet. Then there was the blinking red light .....you could never leave the room and expect it to continue to do anything. One solution I found was to unplug the washer....wait 30 seconds and plug in and follow with lifting the lid and then close the lid followed by holding the start button down for several seconds. This worked sometimes.Very noisy....sounds like a plane taking off after the gears shift and lots of clicking and a long pause to have the water to enter the washer. I have run out of patience. I am going to buy another washer today. I called Whirlpool twice for advice and they offered none but a high dollar repair and no compensation for the lemon I had in my home. Enough is enough.

Well, I read most of the complaints with the failures in the machine. I guess most of them didnt last long enough to rate their performance so here we go. I bought a Cabrio top loader, high-E washer a couple of years ago. This one had a different kind of agitator - it was just a couple of inches or so off the bottom. I specifically bought this to wash comforters and it seemed like it was good for that (rousing agreement from the salesperson). So after a couple of years of working with it, here are my observations:Pros: There are absolutely none!Cons: Okay, other than not having control over the settings (cannot override any of the preprogrammed wash settings), it simply doesnt get loads clean (yes, I use expensive HE detergent). Except for the bulky setting, there is never enough water to wash and rinse the loads properly. Next, it makes a mess of the clothes. At the end of the cycle, and this is true no matter what I wash or how large or small the load is or which cycle I pick - even light and slow spin, it just makes a tangled mess of the load. Stuff gets stuck inside of other stuff, wrapped around other stuff or are balled up. Never have I seen this type of issue. I constantly get the unbalanced load notice and have to manually redistribute the clothes most of the time.To address the too little water level, there are two options. I have discovered that the bulky setting has the highest water level, so I use that most of the time. From time to time (when I need different water temps or just want more water), I have developed a work-around by putting a Y adapter on the hot water inlet and a short hose. Once the washer starts the wash cycle, I stop it and add a bit of hot water to bring the level up enough to do a decent wash job - same for the rinse cycle. So much for Whirlpools water efficiency.Next, the hot isnt hot. Its barely lukewarm. So I turn the cold down to a trickle and I get a bit hotter water. It takes forever to rinse though. Its a good thing Im semi-retired. Next is the inflexible cycle/water selector. I have never had a washer I couldnt override to tell it what to do in unusual circumstances. Boy, what rocket scientist at Whirlpool dreamed that up!But above all, this just doesnt get loads clean. I have experimented with all the variables, load size, cycle selection, detergents, etc. Most of the time, I have to do two cycles with my loads and these are not unusual or extremely dirty loads. They are just normal, everyday laundry for an adult couple. Really, Whirlpool! Who was the conceptual designer on this? Thank goodness they werent working on the space shuttle or some disease research.Bottom line, I am so soured on the design and performance of this product that I will never buy another Whirlpool product, either brand name or generic (Sears). I just cant understand how a company would let something like this out the door.

The washer worked well the first year and has gone downhill since. There is mold on the rubber seal where the door closes. This was supposed to be a recall and was never sent the replacement part. We have to constantly use bleach to clean the rubber.

Whirlpool has electronic controls allowing exact temperature settings. It is an excellent range and it has a storage drawer under the oven for storage of pots and pans. It also has sealed burners so no gunk gets under the burners.

I have a Whirlpool refrigerator and it is the 2nd one in 12 months. The first one the refrigerator was freezing food in the fridge part and thawing food in the freezer part. After several times a technician came to try to fix the problem and arguments with Whirlpool. They finally replaced the refrigerator. The new one is now doing the same thing. I am contacting Whirlpool tomorrow.

I purchased a Gas Stove from Home Depot on 11/23 and it was delivered on December 3rd. My God, Im having a dinner party tonight and the stove doesnt heat up past 170.. Unbelievable!! Need a replacement gas range. Tried to chat and call Whirlpool unsuccessfully. I am very one disappointed customer right now!

I bought this Whirlpool Duet Sport washer and dryer, and I have had to constantly bleach out because our laundry smells like mold. I found out that Tide sells a special cleanser for this washer so I have been using that for the past two years. It did not really help. Well, today I accidentally put laundry soap in the wrong dispenser, so I took the dispenser out and was horrified to find mold that was all in the back where the fluid is dispensed, I mean way back in there. I have been suffering with sinus problems, and swelling in my eyes and face. I even went to the doctor, but no one has figured out why. I now know it is the mold from my washer making me sick. Well, my son and daughter-in-law were staying with me, and commented on how bad it was when they used my towels. I am stuck with a $1,600 washer and dryer that is making my family sick.

We purchased Model WTW81920758200YW0 on September 8, 2012. Its performance has been unsatisfactory, not cleaning the clothes as advertised. Not long after the warranty expired the main bearing failed, bringing a local service technician and we were left with a bill of over $300.00. Yesterday, the machine stopped in mid-cycle. The display went blank and the lid lock would not release. I called a local service company for a visit and the soonest a repairman could show up was next week.A call to a service we had used for the bearing surmised that without knowing the cause of the failure they could only guess that a circuit board was at fault. That visit would be over $300.00 with labor and materials. That was the last straw. We broke the lid lock to retrieve the contents and took a ride to buy another brand of washer. We went back to the appliance store where we purchased this machine to buy a Samsung front loader. The salesman apologized for selling the Cabrio in the first place. Good money after a bad product.

We were looking for stainless steel and this model was that. This model has lots of presets which we like. We lucked out and got it on sale and were able to get features of a more expensive model for a lesser price. The only downside is getting the turntable back in when you clean it. One of the things I wish it had was a way use the timer for foods cooking in the microwave plus use the timer separately for timing food you arent cooking in the microwave, but will be part of the meal. Also, the defrost options could be clearer!

Cabrio Washing Machine - I purchased my washer and dryer in May of 2008. I had problems with sheets, towels and pants getting very twisted and tangled, but I just attributed that to a design flaw. My problems really began in January 2013 when loads were not level all the time. It didnt matter if it were 1 shirt or a load of towels; you had to stand by the machine and it took forever to finish a cycle.On 1/11/13, the first repair was the rods that kept the drum stable. $260.82 later, it worked again. On 2/16/13, the washer quit working. On 2/18/13, the repairman was back out. It needed a lid lock switch. It was $87.14 that time and he would be back when the part arrives ... There was still no washing machine. On 2/21/13, he returned with the lid switch and replaced it. That was $178.04 but wait, there were still other error codes so there was no working machine.I refuse to pay anymore as I now fear I will be buying a new machine after spending over $500 in less than 6 weeks, but Whirlpool did the right thing when I called and they agreed to repair the machine. They wanted a different company to come diagnose the problem (the machine gave an F50 and F51 error code to the repairman here on the 21st), so I have to wait for another repairman to come and look at the same codes flashing on the LED readout.On 3/1/13, the A&E repairman that Whirlpool sent out arrived at my house. I have been without a washer since the 16th of February. He diagnosed the problem and said that it is a $1,000 repair! I called Whirlpool and asked for a new machine, instead of throwing more money at this one. They informed me that if I didnt like their offer, they wont do anything then. I agreed to the repair.Parts started arriving at my house. On 3/13/13, another A&E repairman came out and started to fix the machine. He informed me that there was more wrong than the first guy thought, but he had the circuit boards so he would get it going. On 3/24/13, the washer quit working again and was flashing an F51 error code. This is the biggest piece of junk I have owned in my life. I have missed 5 half days of work since January and there is no end in sight. Why is Whirlpool allowed to get away with such an inferior machine?

Its awful! We paid over $600 for our Whirlpool Gold Series convection/microwave clean release oven (model GMH 6185XVQ1). It worked fine for 12.5 months at which time it started clicking and, after a final zapping sound, would not heat anything at all. I called Customer Service, Oh, so sorry, its past its one year warranty. I was finally transferred to Escalations then to the supervisor of the Escalation specialist. Finally, we negotiated that I would pay for the service call ($129) and they would pay for parts (which were around $300 for a fried magnetron, diode, and something else). That repair was 6 months ago. Today while heating a glass of water in our microwave, I heard the familiar zap and no matter what, the microwave will not heat anything. I called Customer Service again, figuring the newer parts were still under warranty. Wrong. The newer parts were only covered for 90 days. This time, they tried to sell me a service plus package. For only $289, they will re-warranty my microwave for 1 year after they come out and fix it again (cost on me). My other option is to pay $129 again for another service call plus any parts (which Im sure will be about the same as last time. I will never buy Whirlpool again! Buyer beware!

We bought our new Cabrio (washer and dryer) in the fall. Within 2 weeks, I realized what a piece of crap these machines are. They simply do not clean the clothes. I have complained to the store where we purchased them, and I was told there is nothing they could do as the machines are performing as designed? Im waiting for a class action suit to join to get rid of this junk. Curt

I made the mistake of buying a whirlpool product and was wondering if there is a support group for angry unsatisfied customers? I have owned a duet washer and after 2.5 years is giving F1E2 error and is junk.

I’m getting the run around with service. No one comes to our area to check our new Whirlpool hot water heater. The hot water heater has not worked right since I installed it. I need a service tech to come to my house at Whirlpool’s expense and check the damn thing and get me taken care of. Does Whirlpool want to retain a customer or not? Its that simple. My cell phone number is **.

The salesperson was great but we are not happy with our washer. We already had it swapped out once because of white spots showing up on our clothes. The only thing they could think of was that the bleach I used wasnt rinsing out completely so it showed up on our clothes. Recently, I washed a table runner by itself and it had some red in it. Now there are red spots on a couple of items that I washed after the runner. My husband just now asked why there were red spots on a shirt that he wears all the time. I explained. Also, we have had some white spots on clothes and I could scratch it out without leaving a permanent mark. Were no longer using bleach and we use only liquid detergent and all of it is HE. So I dont understand the machine. I hate it.

Model GB2FHDXWS04 - This refrigerator dumps water all over the floor at least 1 time a week. We just leave a towel on the floor to absorb it because you never know when it is going to happen. Have removed the stuff and cleaned all of the ice out of the bottom of the fridge but in no time it is back. What a crummy unit. I am going to drill a hole in the bottom of it and put in a drain I guess.

I purchased the Whirlpool Duet June 2011. Within two weeks, it was tearing my clothes. It didnt matter how little of a load it was, they still ripped. Five months later, my machine was leaking water. The repair man came out. I told him it was also tearing my clothes. His only response was dont load it to full. Well, I called the store where I purchased it and they are sending a repair man out again. I told them to either fix this from ripping my clothes or I was going to take a hammer to the machine and never buy a Whirlpool again or give them a good reference. I also called Whirlpool directly and told them of my problem and they acted like they had never heard of this happening before. I told them to search the internet because everyone is having the same complaint! I had a Fridgidaire front loader for 9 years and never had a problem with it eating my clothes.

I have owned the machine for 1yr and 6 months, bought new from reputable company. The washer always had kind of a clunk sound which the manual says is normal. Clothes would have white marks and streaks after was but disappear when dry. Clothes would seem damp, never like they were completely washed. Went to do a load last night and thats when it stopped working. Powered on, cycle selection was fine, lid locked, typical clunk noise, then nothing, no water. Paused the cycle, lock lid light flashed but didnt unlock. Machine powered off on its own and unlocked. I powered it back on after 30 minutes and it wouldnt let me change the cycle, panel selection was frozen. So I powered it off and contacted repair. They think its the water inlet? Pending repair to see for sure. This is not OK! I had an older machine from the 90s that was still working before I bought this one. So sad to have this type of product from this company.

We are having our second major issue with our Whirlpool Refrigerator Model WRF757SDEM but unfortunately at 1-1/2 years old, it is out of warranty. Although the certified repairman says that the issue with the thermostat is a known issue and the company created a whole new part to fix the problem, there is no recall. Customer service was lousy. They deny any know issue (again, they created a new part they will sell us to fix the issue) and they mocked us for not buying their warranty after having the first problems with their fridge. This new problem will cost over $300 to fix. Why is there no recall if they knew about the issue?

Our Whirlpool Duet front loader washer developed a mildew smell and started making a horrible banging noise on the spin cycle. We had a service man come out and the concrete weight had broken in half. He said this was not uncommon. I just did a Google search and apparently this is a true factory defect. Luckily we had purchased an extended warranty. I always thought Whirlpool was a premium brand but after this experience I will never buy another washer from them. They should do a product recall.

Recently bought and had a Whirlpool Cabrio Washer (from Orvilles appliances) installed in my home. The very first day I hated it. Worst purchase I have ever made. I spent over an hour picking hair out of my clothes, and hair was also stuck in the crevices of the drum. This is the very worst machine and company I ever had to deal with. They told me, Too bad. Since there was no mechanical problem there is nothing they will do. I will never deal with either of these companies again. I cant wait to see what the hair build up will do to the machine itself, Had it less than a week.

6 months after we moved into our new house our Whirlpool refrigerator froze up and we had it repaired. 6 months later the same thing. Still under warranty. 6 months later the same thing. I asked for a new refrigerator. They said it could not be replaced unless it was deemed unrepairable!!!! Now after 2 years with the same problem every 6 months I get in contact with corporate and advised to get an extended warranty because “they don’t replace refrigerators”. So an extended warranty will cost $350 this year and increases every year because the fridge is over 1 year old. Ok so I am paying to have it repaired with their so called warranty!!! We went to an appliance store and purchased a new not Whirlpool refrigerator. Will never buy anything Whirlpool again and let all my friends and family know of my experience.

The refrigerator is 7 years old and I have already replace parts. The appliance is not made as well as they were made in the past. The inside of the Whirlpool refrigerator is small. The design of putting the soda can dispenser on the door was not a good one. Due to the weight of of the soda in the dispenser is breaking the hinge on the right door or the french door. The rubber gasket is shredding as well.

This machine is 18 months old. First it failed to drain (LD code). Ran diagnostics and found the drain pump ($60) failed. The Mexican part was replaced with an Italian part. Two weeks later, the infamous F1 code flashed - control board. I sourced a new one. I ran one load and another F1 code is flashing. These are $150 electronic parts. Fuhgetaboutit. Im sending this ** to the dump and going back to electromechanical controls. I had a Maytag that lasted 15 years.

Bought a Whirlpool refrigerator at Home Depot in 2018. It has been a $3,000 piece of junk!! Customer service is garbage!!! They refuse to address a persistent problem since the day we bought it. Do yourself a favor and buy another brand!!

Sturdy, durable, and flawless operation, from the 5 multi style smooth top elements to the self cleaning convection oven with the secluded bottom element. It is a sleek clean looking appliance, and its the best weve ever owned. To one that says they dont make them like they used to, I say thank God!

FRUSTRATION!!! It is unbelievable that even appliances have become DISPOSABLE! Where are the days of when our parents bought well made appliances that LASTED 20 years with NO problems??? There was satisfaction knowing that a purchase of an appliance was $$ well spent! These days it costs MORE to replace parts than IF you purchased a brand new machine! We purchased BRAND NEW Whirlpool Duet Sport Washer AND dryer in 2007. The washer has been repaired a total of 5 times and the dryer 3 times!!! IN A SPAN OF 10 YEARS! Are you serious?! With the $$ spent on warranties/ labor/ parts: WE could have purchased new appliances. What is WRONG with this picture? IT IS ALL about making money on REPLACING PARTS/WARRANTIES/LABOR!!! Forget the consumer that is spending THEIR hard earned money to buy the appliances initially. Short of going to a laundromat, the consumer needs to purchase a washer & dryer. So I guess it is a vicious cycle of REPAIRS/REPAIRS AND MORE REPAIRS!!!

I purchased the Whirlpool Duet Steam Washer and Dryer in the spring of 2010. Washer bearings just broke. I was told that the bearings in these machines are not strong enough to support the spin cycles. It is very disappointing to think that a company like Whirlpool would have their customers pay $1000 for a machine they know is not going to last. I agree with Julie. Maybe a class action lawsuit needs to be filed. Is there a lemon law for washing machines?

Our Whirlpool refrigerator breaks down after two weeks of purchase. I purchased a Whirlpool fridge for my son and his wife as a house and new baby gift. Just two weeks later, the fridge was not cooling and seemed to not be working. The technician was called, and he confirmed that the fridge was not working. We called the shop where the fridge was purchased from and advised they would not refund or replace the fridge.We are now forced to wait for a replacement part that could take up to 2 months to arrive. And there is no guarantee this problem will not reoccur with a new part, as per the technician. I called Whirlpool and lodged a complaint, but that went on deaf and ignorant ears. I am told to call the service repairer. I am sure there is a law to protect Australian consumers.I paid nearly $1,000 for a fridge that is useless! I would like Whirlpool to contact me, and tell me why they shouldnt be accountable for their product. I would like to return the faulty fridge, accept a refund and buy another fridge. My family are living out of an Esky, and this is a ridiculous way to refrigerate food stuff for adults and children in the heat of northern Australia. Whirlpool, I am waiting for your call.

I took the time to read the owners manual, and then ran machine (washer wtw5000dw0). Using an affordable HE approved detergent (Xtra), I had no problems. If the washer doesnt fill or drain correctly, look up how to recalibrate it, was easy to do because I did that after transporting it. My clothes are cleaner, and I am using LESS detergent!

I purchased Whirlpool Washer WTW4815EW on December 29, 2015 for my tenants apartment and by October 7, 2016 it was not working. I called Whirlpool for service since the product is under warranty. The closest appointment was more than 2 weeks out. On the appointment date the technician called me and said he was on his way to my house which is more than 30 miles from my tenants apartment. The technician said he could not service the tenant area as that was a different group, so we rescheduled for a week later. A week later no one shows up, so I rescheduled yet again for November 3rd and drove myself to wait for the service person who was supposed to be there between 8 am to 12 PM. At 11:40 I saw there was a 10:36 am Whirlpool attempt to call me but no message was left. When I called back they told me the technician called in sick and they called at 7:30 (my iPhone indicated 10:36 am). Now they say someone will come on Saturday November 5th. It will be one month on November 8th with no working washer. While it is bad enough the washer stopped working in less than one year their service support is even worse than the product.

We purchased the Induction Range Whirlpool Model WF1910H0AS0 almost 2 years ago and bought the extended warranty that was offered by A.J. Madison. We started having problems about 8 months after the purchase. We have had technicians out numerous times and they couldnt solve the problem of the cooktop part of the range locking and beeping when we use the oven. I have made several calls to Whirlpool and basically was told too bad. I see that there have been several complaints with the product and they have stopped making it. On one repair visit we were told that they were replacing a particular part because they were having so many problems with the heat blocker that goes under the glass top that they made it thicker and were hoping that this would solve the problem. It did not.The thing that really has sent me over the edge is that last night I was just boiling water and I heard a pop that came along with a smell (electrical burning smell) and the range blew a fuse and now the cooktop part just shows the deadly error F47. I am so disappointed in Whirlpool and their customer service and too bad attitude. You would think when you are spend almost $1800 for a range that it would not have problems so quickly and pretty much render useless in less than 2 years. Also shame on A.J. Madison for selling extended warranties through a company that has such a bad ratings with the Better Business Bureau. The only reason I gave 1 star is because you cant have no star.

My Cabrio washer worked fine for approx 3 years. Within the last 9 mos there has been one repair/replacement issue after the other: pump, computer board, bearings, seal, etc. Whirlpool takes no responsibility. Worse purchase I ever made.

We purchased our Whirlpool refrigerator in 2010. A year or two after the purchase the side walls, draws, and shelves all started to crack open. We asked whirlpool to send new parts. They sent one and that cracked also. We will never buy from them again.

This washing machine is terrible. It barely cleans my clothes and frequently gets off balance. I am now on my second repair call in less than 3 years. (I bought the unit in the summer of 2013. It is now the winter of 2016.) The last repair guy tried to blame me, suggesting that I was filling it too much and with heavy materials. Last night, I washed 5 or 6 doggie towels. Not even large, bath sized towels. And the whole thing just stopped. It wont spin and wont unlock. What a piece of crap.

This dishwasher is the most quietest dishwasher we have ever bought. Cleans even the worst messes with ease. We love all the different modes for cleaning levels. Plus in addition the ability to adjust the racks for large capacity dishes. As well the adjustment to wash fine china and crystal. We just love it!

7 months ago we had a Whirlpool dishwasher installed into our home. While away on vacation the piece inside malfunctioned and caused major damage as water filled the home. Whirlpool claims, that because it’s a part that they contract out to another company, they “Whirlpool” are not responsible! If you purchase a product from Whirlpool and they put their name on that product, then Whirlpool should stand by its product. Well... beware, you’re not going to compensate from Whirlpool! We urge you, make sure of whom the parts of the product your buying from belong to, before you buy it FIRST! Never again!

I bought a Whirlpool washer and after a few months it started acting up when spinning. I contacted your so called customer service and they gave me the runaround. Told me I wasnt loading it right. Im 60, I know how to load a washer. Well it got worse and worse and finally went kaput. Its going to cost over $100 to fix the springs and I was told it was your lemon and all that brand was bad. I will never buy another Whirlpool product because you wont stand behind them....

Whirlpool Dryers: I have 2 Duet Dryers and the user interface has gone bad with both several times. I called whirlpool several times to repair. The last time, they refused to repair the dryer. I started having problems with my dryers within the first 6 months of owning them. The repair guy that they sent out the first time said this repair was a major problem with the duets but the company chooses to not acknowledge the problem. They should be required to have a recall. Never by this dryer, you will regret it!

Whirpool Cabrio Washer - Do not buy this washer. Clothes are not clean. They are twisted with residue still trapped in the wadded up mess. Even if you select deep water clean, your clothes will still have the same dirty marks on them as when they went in. Also, there is no spin cycle. If youve got a bunch of wet towels you just want to spin the water out, you can forget it. You will have to do a complete wash. And the 1 star is not even appropriate but there is no choice of a big fat zero. Wasted a lot of money on this when Ive had great luck with Kenmore.

We purchased our Whirlpool Refrigerator #WRT519SZDB from the Home Depot 2 years and 10 Months ago. About three weeks ago it started to freeze items in the frig section. We lowered the frig section cooling level one selection and went on a two week vacation. When we came back, everything in the freezer section was thawed out. We had a tech look at it and he told us that the compressor was partly seized and overheating. Tried to reach someone at Whirlpool customer service by phone, email, and chat but so far, I have not had anyone contact Me back? Looks like repair will cost almost as much as a replacement refrigerator. So much for Whirlpool being a trusted brand!

I bought a frost-free deep freezer 2 years ago from a box store. Within 1 year it went out and I lost approximately $1000 worth of food. Called the box store and they called A&E. Bought the extended warranty. A year later the deep freezer went out again. Lost another $1000 worth of food. Im scared to death to use my Whirlpool deep freezer again. Am I going to lose $1000 worth of food each year? No satisfaction with Whirlpool whatsoever for this piece of junk. And the problems were manufacturer defects. In fact, one of the parts had a recall on it and we were never notified. I dont know about anyone else, but I cant afford to just throw away $1000 worth of food every year. Ive bought my last Whirlpool appliance now. I wish I had read these reviews. It would have made a difference to me.

The oven works well. My complaint is that the glass door is very difficult to clean. Some kind of liquid got in between the panels and I cannot clean the glass without removing the oven door. Im afraid to remove the door as I may not be able to get it back on the oven. I have dirty glass I cant clean and that makes me unhappy. Otherwise the oven works just fine.

I bought a Whirlpool duet washer and dryer. These appliances are still under one-year warrantee. My washing machine was broken for four weeks, and they have been unable to receive all of the parts needed to repair it. They have made three appointments to fix the machine, telling me that they have the parts and only to cancel the appointment the night before. I have tried to get Pacific Sales to exchange the broken machine, but they will not do that or compensate in any way. This is a top of the line model; I would have been better off with a low-priced model, and I might actually have a machine that worked. Whirlpool supposedly had the parts on back order, which is not what Whirlpool informed me when I was able to reach them.

The Weatherization program installed a whirlpool refrigerator in our home in October 2012. The fridge is less than 2 years old and the blower fan went out. We lost most of our food (what wouldnt keep in a cooler) and my daughters insulin spoiled. When they put this fridge in, they took our old one saying it was less efficient. Now we are stuck with a fridge that doesnt work and is out of warranty at less than 2 years old. We have left several messages for a Whirlpool representative to call us back and here we are, one week later, and no call back.This is frustrating because although the fridge we had may not have been as energy efficient, I am almost certain that it would still be working. I have never heard of a fridge that lasts less than 2 years. Also, we know that the blower fan must be a common problem because they are back-ordered approx. one month. We checked online, and called local businesses and not one place has the part available.I think we at least deserve a call back considering how stressful this has been on us. I had just spent all of my grocery money for the month, and 70% of it went bad and had to be thrown away. Money is tight for us and replacing spoiled food is not an option. Also, the insurance company denied our request to refill my daughters insulin a little early. Without proper refrigeration the insulin goes bad. The insurance doesnt replace lost or spoiled medication. Guess we get to pay for that too! Thanks so much Whirlpool! Ill be sure and highly recommend your products to my friends. (NOT GONNA HAPPEN.)

My parents bought a Whirlpool refrigerator that makes a strange noise, an intermittent clicking. Sometimes it goes on for hours. It is neither the ice maker, nor the compressor. I contacted Whirlpool, they said it is normal. It is not normal. I have a twenty-year-old refrigerator far quieter than this brand new, $2600 noisemaker that keeps things cold.

I am so thankful that there are others who are having the same problems with their washers. Since 2006, my husband and I have had words regarding who is not loading the washer right, why are the clothes still dirty, and why does the dryer have so much lint. The excessive amount of lint ruined my dryer. I get UL codes all the time! Before the UL flashes, it sounds like someones trying to break in. It is 2011. Despite the problems, it has not died yet. I am selling it and will never purchase another from them again. I have the dryer and it went out 2 years ago. It has problems with the motor. You can guess I did not buy a Whirlpool.

I purchased a brand new Whirlpool Cabrio Washer from Sears less than 5 years ago and am junking it! It has all the same problems everyone else has mentioned. I have had it serviced for faulty motherboard, unbalanced tub, broken lock mechanism. It had rusted out on the inside. Clothes are never clean and it constantly becomes unbalanced in spin cycle. We have to stop and rebalance every single load 3 or 4 times--or more if trying to wash a set of sheets or two or more towels. Cant leave the machine unattended for even a few minutes. I might as well be hand washing on a scrub board at the edge of a river! Waste of money and Whirlpool Customer Service wont say anything but should have purchased extended warranty! What a load of crap from what was once a reputable company that used to make a reliable product. WARNING--NEVER BUY A WHIRLPOOL WASHING MACHINE!!!!!

I own a Cabrio Whirlpool washer. It already had several repairs and never got my wash clean. I complained to the company, no results. This washer is not even a year old. Why will they not stand behind their products?

We purchased a Whirlpool Refrigerator Model Number WRS555SIHZ06 Serial Number HRA2506806 on July 15th 2021 from Lowes. First one from Lowes came off the truck damaged so working out of a cooler in the kitchen for 2 more weeks. Now 4 months later the compressor is out and all the food spoiled like $400 bucks gone and food is expensive these days. I called and Whirlpool said no food allowance and no replacement. Fridge can be brought over - so repairman will come out in 6 days and then say he has to order parts then I wait two more weeks then the repair. So 3 weeks without a fridge with the holidays coming up and people to feed and food to cook. This is going to be interesting. I hate Whirlpool Refrigerator - never again will I purchase one of this appliances. The GE I had for 12 years and no problem at all for 12 years. What is going on with these companies????

In the middle of the evening the door glass spontaneous shattered with nobody around. Its only a 3 year old microwave builder installed in a new home. Ive always heard Whirlpool appliances are garbage but this proves it 100 percent.

I purchased the original Whirlpool water heater from Lowes in April 2008 for $372, and an installation charge of $443, grand total - $815. In February 2012 the tank leaked profusely, enough to ruin a section of hardwood floor in the room behind the garage where it was installed. Whirlpool provided me with return authorization, and Lowes provided me with a replacement water heater. So far so good. Since the original installation was done through Lowes, the replacement had to be as well, according to Whirlpool, but now they charged $500 with tax to install the replacement water heater! Grand total now is $1315. Fast forward to May, 2014 and the replacement water heater, just barely 2 years old, shuts off with a code of Bad gas control valve/thermostat. I call Whirlpool and an extremely rude 20-something staffer tells me the unit is out of warranty by one month! The replacement unit has no warranty at all - nada - only the original one does... Is this unbelievable or what?! BUT, they would be glad to send me the replacement of the defective part for $200 PLUS overnight shipping charges, and I would be responsible for all labor charges to install it. Had I opted for this my original $372 water heater would have wound up costing me in the neighborhood of $1800!! I told her in no uncertain terms what she could do with the repair part, and now I am going to go shopping for a water heater that will last me more than 2-4 years, and you can bet it wont be a Whirlpool, and it wont come from Lowes.

Bought this 18 cu ft refrigerator this year. Only 3 choices for temp. Everything freezes, milk has crystals, ice cream is soft. Buyers remorse! Old ref was a Whirlpool. Wished I would have given others a chance.

This dishwasher, compared to my old one, is very quiet but does a very poor job of cleaning. I now have to prerinse most all items. The silverware rack leaves many dirty items such as peanut butter off a knife. I probably waste more water on prerinse than what is saved by the washer.

I purchased a brand-new, $4600 36 gas range online. They finally installed all appliances by 10:30 pm last Friday, July 8, 2011. On Saturday, July 9, 2011, I woke at 2 am to weird smell (gas). I opened all the windows and went back to bed not sure since we never had gas before. Gas company came out that day and determined that the burners were bypassing gas. Jenn-Air said it was normal for some gas to come out and that they have sent the repair technician out three times to not find any leaks. The gas company red-tagged the stove saying it was hazardous. Jenn-Air has terrible customer service. I was on the phone Monday to Friday this week, every day talking with safety managers to supervisors with no results. This will be the LAST Jenn-Air purchase EVER!

The machine Will Not Clean the Clothes. Had to Buy A Maytag Washer.

I have used Whirlpool products for over 30 yrs. This is the worst made product I have ever purchased. The ice maker doesnt produce very much ice. The cold water on door isnt cold. There is too much wasted space in freezer and refrig. side. You cannot get anyone to call you back to call for help. I contacted Whirlpool over a month ago. No return call yet. Consumers beware!! Model no. WSF26C3EXF01.

Whirlpool 70328 215 IMFRESH ROY 5S purchased on 14th Feb. 2016. It has stopped cooling on 11th April 2016. Complaint lodged on 12 April. No serviceman attended and not connecting toll-free number. Never, never go for a Whirlpool refrigerator.

Six warranty visits and the fridge still doesnt work. Cools to around 44 degrees in the upper part and lower part barely freezes. We have gotten sick from food left in the fridge after two days from the grocery store. It is now approaching two months without the use of our new refrigerator. DO NOT buy a Whirlpool. Apparently there was a manufacturing defect. We are now learning that a $2,400 fridge doesnt seem to be able to be fixed by factory-trained specialists.

Dont even consider a Cabrio top loading washer. Wastes your time, money and insults your intelligence. I never use the deep water cycle but boy the machine does! Ive had loads that have taken hours to finish on the quick setting! Thanks Whirlpool.

I called Whirlpool’s 800 customer service line to let them know I was having a problem with this loud humming and rattling noise coming from my refrigerator because of a manufacturing defect (according to the service tech that came to my house to fix it). Apparently, the metal grid is being held by a flat mental hook which vibrates. What a loud noise. We cannot eat in our kitchen: the noise it terrible. The repairmans solution was to put a piece of rubber between the two metal pieces. It worked until he left. I told him it would start again and it did! I even let the customer service rep hear the noise and she agreed. I am in the early stages of my problem, but from what I have read I am not very hopeful. I would like to have the names and phone numbers of the people at Whirlpool who refused to help. Maybe if we would all band together and call them, they would get tired of hearing from unhappy customers and fix the problems. I am game. Anyone else?

We purchased the 36 inch Wide 4 Door Refrigerator with Exterior Drawer about three years ago and it broke down twice in that time frame. Then yesterday the freezer part and ice maker have stopped working AGAIN!! We probably have spent $2000 on repairs. Complete disaster of a fridge!! Do not purchase one!!

Purchased our hot water heater in August of 2011. About 3 days ago, it just stopped working. Surely it should last longer than this, right? Nope apparently I was taken! We called the manufacturer and described the issue. They said it was the thermopile. They could send us another out in a few days but we didnt want to wait so we paid $50 for a new one we were able to locate at a hardware store. Nobody sells these! We replaced the thermopile but no results... Pilot will not stay lit. Called Whirlpool back and they said to hit the reset button which we did. Called a technician (several) which wouldnt touch the heater. Said nobody works on these because they are riddled with issues. I pleaded with him to test it which he did. He said the control box is out! He said to cut our losses and buy a new one! I am so very upset! I cant afford another one! We called Whirlpool back again to see what they would say this time - they are sending us another control box! After reading all of the complaints and being without hot water, I am not hopeful of a good result! I plan on replacing the control box that they send and then saving for a new heater! I want my money back which Ive heard just wont happen! I have also had nothing but issues with my gas stove made by Whirlpool ever since it was only 6 months old. STAY AWAY FROM WHIRLPOOL PRODUCTS!! Run!!!

It was obviously designed by someone who has never had to clean a refrigerator. There are grooves in the door gaskets seemingly making their sole purpose to collect crumbs and mold with no obvious way to keep them clean (No, Q-tips dont do it). A layer of ice forms below the basket in the freezer (bottom freezer) which, when it melts, soaks the kitchen floor. Ice must be chipped out at least every two weeks to avoid flooding.

Purchased Whirlpool Dishwasher 1 year ago. I use the Dishwasher once a week. When the Dishwasher was originally installed, immediately I noticed when dishes were placed the racks, there is an annoying squeaking sound. I am not exaggerating but the noise can be heard from my sidewalk outside! I called Whirlpool and a technician was sent to my residence. There is nothing wrong with your Dishwasher. I was told to Grease the racks. One year later I still have the same issue! I placed the phone near the Dishwasher to have the Customer Service Rep hear the Loud Squeaking and to no avail. I will never ever buy another product from Whirlpool. Now the latch will not close to the door! I rarely use this appliance, only placing dishes and utensils. No Pots and Pans!!!!! This is going to be another huge bill I will be responsible for paying and I dont feel it is of my own doing. It seems to be apparent that Whirlpool does not stand by their products!!!! I am sure they are aware of all these issues, customers are complaining and nothing seems to be done from reading some of these posts. I am wondering why they are still in business.

Whirlpool Cabrio Washing Machine F1 code - We have had this washing machine for over 6 years now, and ever since our 3 year warranty time was up, the washing machine will only stop, and display the F1 code as soon as the wash cycle has completed, with 23 minutes left. To start off, with this problem, it is causing me more water, and electricity that should not have to be wasted if the machine worked properly. I called the place where I got the machine, and was told to give Whirlpool a call. I did this, and was told that there was nothing that could be done, and if I would like to schedule an appointment for a tech to come out and work on it, they could do that. YES, I would have to pay for it. Needless to say, the washer has been doing this for over 6 years, and if there is a way to get it fixed WITHOUT having to pay for the repairs, that would be wonderful.

I thought the new AquaLift cleaning would be the greatest. Boy, was I disappointed -- no thoroughly disgusted and very angry -- when I tried to use the self cleaning oven. I had cooked a prime rib roast and a lot of grease had spattered inside the oven. I wiped away the excess and did a cleaning cycle -- what a joke! There was still grease running down the door and walls. Nothing was changed after two cleaning cycles. Now I have to crawl inside the oven and scrub it manually. I was always pleased with the old self cleaning ovens which only left some ash and a little bit to clean up. The AquaLift technology doesnt work at all, didnt Whirlpool test it prior to selling it to the public? They will surely lose my business and I hope a lot of other peoples business as well. This technology was a huge mistake!!

My Cabrio washer is 6 years old & has performed poorly from day 1. It does not clean properly so I have to rewash or wash clothes on a longer cycle (so much for energy efficient), it sounds like a plane taking off and has actually startled visitors, and it mysteriously forms sheets, towels & blankets in the shape of spare tire. This is the worst washer Ive ever bought.

The unit had all the features that we wanted and considered essential. The unit only weak issues is temperature(s) in both sections. The freezer is very poor with ice build up on the food stored for more than a couple of days. The manufacturer has been very weak in support as to how to solve this problem.

The machine never allows enough water to clean the clothes and I do not have the option to add more water or to spin the clothes again. The maker of this machine must think that people do not have the ability to know how to wash clothes or think for themselves. I need a washer that I can tell to add more water or just spin these clothes again. Very disappointed. I need an older model that I can control.

The first washing machine I bought was a Cabrio. Started having problems right off. After the repair people had been there several times we finally got Whirlpool to replace the machine. We got another washing machine. We bought two warranties because it kept tearing up. Repair people said this time it would take $1500 to fix it so of course AIG said, We will not pay this much. So I have a washing machine I have spent $1600 on and it leaves, greasy spots all over my clothes. So fed up with Whirlpools trash!!

Originally, I loved my machine. At the one year mark, my washing machine began a f51 error code. I looked it up and it had a recall. The entire board had to be replaced. Now, I keep getting a ul code and it will not quit. Also, the inside of the top is rusting out so badly that chunks of rust fall into the washing machine and stain my clothes. I wish Whirlpool would fix these common errors. I see many other people complaining online that the same thing is happening over and over.

We went out and bought the new front loader washing machine and dryer. Neither one of them works correctly. A service call had to be made the the day we ran the first load. The washing machine only washes errors popping up F8 and E3. On the dryer error code E3 pops up and cannot dry clothes. Worst purchase I have ever made.

Bearing on washer drum began getting louder at two years. Service man stated that Tide and a few other detergents were destroying the washer bearing seal. He told us that neither Tide nor Whirlpool will admit the problem exists. The cost of repairing the washer is close to the purchase price. Whirlpool should be subject to a class action lawsuit!

We purchased our fridge February 2017. It stopped working September 2018. It wasn’t staying cold. Under manufacturers warranty a repairman was sent out to assess the problem. They had to order the part that went bad. A week later the came back and “fixed” it. Total time missed at work 1 day. It stopped working again April 2019. It wasn’t staying cold. Under our Lowe’s extended protection plan a different repairman was sent out to assess the problem. They had to order the part. A week later they came back and “fixed” it. Total time missed at work 1.5 days. Yesterday (July 2019) we noticed it wasn’t cold AGAIN. Called Lowe’s and was told they could call it a Lemon and replaced until the 4th time it needed repaired. They would need to send out a repairman and assess the issue and make a repair. Our 3 yr extended protection plan expires February 2020. So we’re probably not going to make it Lemon status within the warranty. The fridge is French Door Bottom Mount model. Do NOT buy this refrigerator!

We have had our washer just over a year when the plastic hose that fills the detergent tray began leaking. The entire assembly is plastic and poor quality. Whirlpool customer service says since it is after 1 year, that I would need to pay for the parts & service ($489). I would not recommend this machine or anything Whirlpool.

Called Whirlpool customer care for help with identifying make and model number of a slide-in, ceramic cook-top range (one of their popular brands). The representative was cordial, patient and very helpful when it came to giving me directions on how to locate make/model information on the unit. That was until I let her know about a recent problem with the stove. The edge of the cooktop is much too sharp! My hand got cut while wiping down the stove top/adjacent counter. Although Ive had the stove for a while, Id never had that happen before; thats probably because I used a thin rag this time around to do the cleaning. I asked the rep if anyone else had reported getting cut by the stove top. She said, No. I let her know that my goal was to just them know about the situation, because such a sharp edge on a cooktop is a safety issue. She disagreed. But what could or should she have said? In all fairness, it came down to balancing loyalty to the company with genuine care for the customer.I do appreciate how kind she was in communicating with me, but am very displeased that once Id shared about the problem she seemed rather dismissive of the situation. How could the risk of being cut NOT be a product safety issue??? If you visit the Consumer Products Safety Commission website, you can see where risk of laceration is a reason some products are recalled. Based on that understanding, I would say that sharp edges on a ceramic cooktop IS a safety issue!

We purchased a 50 gallon water heater that claimed to come with a 6-year warranty on parts. Its been a little over two years that we owned the product, and we noticed rust on the bottom. We checked to make sure if water or even moisture is visible from the outside - nothing. The problem is obviously coming from the inside. Since we have warranty, we called them and got nowhere! We were told that it is just cosmetic. They refused to send out a technician to take a look at it. We even emailed them pictures (see pictures) and still nothing, no service. Their warranty is a joke. We will never by any Whirlpool product ever again. Dont believe the sticker that claims you are covered for a certain amount of time. When it comes down to it, they will not do anything for you.

Love the dishwasher, except the racking which has some top rack channels which are too small to be used by glasses, mugs, etc. The Power On/Off should automatically power down when the cycle is finished. Too often when someone leans against the dishwasher while opening the overhead cupboard, the dishwasher will start up because the unit was not powered down.

My comments are similar to all the other comments on here regarding the Whirlpool Cabrio washer: I bought a Whirlpool Cabrio 5 years ago and have been sorry every wash day since. I have to wash my clothes twice because the machine doesnt fill the tub with enough water to get the clothes clean. I have tried using the bulky setting for all loads to try to get the water level high enough to at least cover the clothes. This is a terrible design and the worst piece of junk. I will never buy a Whirlpool product again...

Purchased a Whirlpool Cabrio WTW7340XW2 washer approx 2 years ago. The machine runs so loud on the spin cycle you cant have a phone conversation or hear the TV over it and is leaking grease from the bottom. My mistake to not purchase the extended warranty but you would think a machine would last more than 2 years. I contacted Whirlpool online and by mail and they do not stand behind their product. I did contact a local repair shop and by our phone conversation was told it would be approx 300-350 to fix it and Im not putting that kind of money into a repair. Just want to let consumers know this machine is junk and spend your money on quality appliances, not Whirljunkpool.

Right at 18 months ago, we bought the Whirlpool Cabrio Top Load washer. The last washer we had was the bottom of the barrel Whirlpool model and it lasted 8 years. So, I had no problem purchasing the brand. But now, our washer wont go through the cycles and we hare having lid lock issues. The repair guy said the lid lock was fine which I thought was good news because he said it would be $300 to replace including his service call. Now, it looks like our choice is a $350 motherboard, or a new washer. Whats wrong with this picture? I can go to Lowes right now and buy a used one (exactly the same for $399), pay $350 to repair my two-year-old $750 washer, or buy a different washer? Its hard to believe that a $750 washer is only good for 2 years.

I bought this dishwasher in Nov. 2018 to replace one that was barely working. I have enjoyed using it much more than my old one. Its very quiet and does a great job of cleaning dishes, pans and silverware. The only problem we had was installing it. The leveling screws do not hold their height adjustment when the dishwasher is pushed across the floor during installation because the leveling screw pad was changed from steel to plastic and the tapped hole for the leveling screw is too loose. The effect of this - whereas the steel pad would slide the plastic pad will grab, turn and move the leveling screw out of adjustment. Especially if its tapped hole is too loose. So we went to Home Depot and bought 4 5/16 nuts and used them as lock nuts on the 4 leveling screws. This cost 50 cents. Once we installed it everything worked perfectly. It does take longer to complete a cycle than my old one - 3 hours vs. 2 but it uses less water and does a great job of cleaning. You must use a drying agent with your dish soap or it wont get dry enough. Also, if you use the short 1 hour wash it wont have as much time to dry and some dishes wont be completely dry. I usually wait to do a full wash with the normal cycle - 3 hour.

Does everything its supposed to except get the clothes clean! Nothing gets clean, even on bulky setting when theres supposed to be more water in the machine!

For the second time in 18 months, I have had to replace the top shelves on my refrigerator (Model #ED5VHEXVB01) because the cheap plastic borders have broken. The first time it was covered by the 1 year warranty, but this time (12/11) Ill have to pay $130 just for one shelf. Unless the quality of the product has improved, Ill probably expect to have to replace them again within the year. Needless to say, Ill never buy Whirlpool products again. Im out $130 because Whirlpool will not replace them for free because the product is no longer under warranty.

I purchased a three door Whirlpool refrigerator in August of 2014. Today I am having it repaired for the third time, each time for a different reason. I either bought a lemon or Whirlpool products have really gone downhill. Either way I will never again purchase a Whirlpool product. Between the cost of the repairs and lost food, I am debating about dumping it and buying a new refrigerator.

LEDs on control panel started going out in four months. It’s a 400$ part. Under warranty but what’s going to happen in another four months? The range I had from the eighties was still working. You don’t get what you pay for anymore. Just excuses.

I purchased a Whirlpool washer (WTW4800Q) in November 2011. Already, it has rust in the tub. The warranty does not cover this. I never really liked the thing since I have had it. It takes much too long. Lid locks and then starts over. Also, warranty is not good. I wouldnt ever buy their product again and suggest no one else should either. I loved Maytag before Whirlpool bought them out. Im putting this one on Craigslist and buying a real washer, a Speed Queen! Yes, Speed Queen has all metal parts and makes a home washer. Just have to find a local dealer. They are there.

I purchased a Whirlpool Gas Range from hhgregg July, 2013 and the oven was non-operational within 4 months. Since then Ive had 4 repairs on this lemon of an oven. I purchased the extended warranty plan through Assurant and, fortunately, have not had to pay a dime for these repairs, but I should not need to keep repairing the same parts continuously. Either the replacement parts are bad or the service technician is terrible and doesnt know what hes doing or Whirlpool makes such poor products that they are not meant to last. There is NO lemon law for appliances and the decision to replace appliances is the decision of the Assurant Warranty Co & they won t replace it and even if they did it would be with a used refurbished gas range. Why would I want someone elses refurbished piece of junk when I already have a repaired piece of junk?!

Just want to pass on update on my dryer situation. Purchased a Whirlpool WGD4900XW1 3/9/13. The motor went out 6/22/15. Now Dec 2016 the replaced motor went out again. Whirlpool says... So sorry, we can get you a discount on a new one... ABT is giving me a break on the part so I am going to go ahead and fix it one more time. I assume in another 18mos I will be looking for a new dryer! DO NOT BUY WHIRLPOOL DRYERS. THEY ARE CRAP!! My brother also purchased a Whirlpool & it died about the same time.