Updated on 03/15/2020: We bought this eight years ago to replace a 20-year-old Maytag that had finally developed a rust-related leak after serving us faithfully and needing only one almost trivial repair ($10 DIY lid switch replacement) over that period. I have replaced the water pump, the gear case, rotating seal (3 times), the lid switch striker (3 times), and the replacement gear case is making noises indicating incipient bearing failure. In its finite wisdom, Whirlpool decided to make the failure-prone main bearing irreplaceable, which means you have to replace the entire gear case, at a best-case cost of $120 and a worst-case cost of $300, plus labor, unless you do the work yourself, as I do. The secondary issue is mold and a musty odor. The most effective way to eliminate this is to pull the drum (non-trivial, requires a car jack, a 2x4, and a special spanner/wrench) and swab down the inside of the tub with disinfectant. (Been there ... done that three times over 8 years.)Original Review: I am in the process of replacing the bottom seal on my 6-year-old Whirlpool Cabrio (WTW5500XW2) washer. This will be the fourth major repair I have done on it. Fortunately, I can do the work myself and know how to find the best price on parts, but it is still discouraging that a lightly-used washer would have so many problems in such as short time. (It replaced a 20-year-old Maytag that finally rusted out.) Repairs to date: 1) replaced drain pump motor; 2) replaced lid switch; 3) removed basket twice to clean outer tub, due to mold and odors; 4) replaced suspension rods due to excessive spin vibration; 5) out of commission awaiting a new bottom seal. Total cost of parts (labor was on me) is well over $100.

I bought Whirlpool refrigerators around one and half year ago. After 1 year the light of refrigerator was broken. I was contacting customer service and arranged the fix. However, the contractor never showed up. After I making the call several times, I gave up finally. The repair is really bad experience!

Purchased a 80 gallon Whirlpool Water Heater with a Life Time Warranty. When it overflowed because the system failed to detect the water temperature, called and they sent in the temp sensor (I paid for shipping). Had plumber replace it. One day later the same thing happened, called and they sent in a board. Same exact thing happened. By this time, Im without hot water for over 2 weeks in dead cold January on the East coast. They will replace the water heater but only a 50 gallon NOT the 80 because they no longer manufactured the 80. Option given by Lowes is to add a recirculating pump to give additional gallons. But, of course Whirlpool said NO. They only can give me the 50 gallon. What a ripoff!!! Please, please DO NOT purchase any product from Whirlpool. Now they change the same to A.O. Smith Signature Premier.

Weve owned this refrigerator for about 6 weeks now. It is a 23 cu. ft. model with a bottom freezer. It is working great, and we have no problems with temperature control in either the refrigerator or freezer sections.

After 6 years, Our $2500 Whirlpool refrigerator stopped cooling and would not dispense ice. Since we had purchased a Whirlpool extended warranty, a Whirlpool authorized technician replaced the compressor and informed Whirlpool it also required a new door that included an ice dispenser. A door was not available so Whirlpool refused additional repair and refunded the $400 purchase price of the warranty. Meanwhile the refrigerator stopped cooling again and Whirlpool refused any additional obligation. The refrigerator was now non-functional and we had to spend $3500 to get a comparable refrigerator. The moral: 1) Whirlpool makes very expensive refrigerators that have about 30% of the life-span compared to earlier vintage refrigerators. 2) They know this and will promptly refuse to warrant their product if it is to their benefit. Shame on you Whirlpool for using your corporate leverage and shady business practices to manipulate your customers.

This product is not even worth 1 star mark. Like everyone else the Whirlpool Cabrio top loader does not clean clothes well. It leaves streaks of dirt and lint. It does not agitate well at all and does not put enough water to the point where some of the clothes dont even get wet. I had a repair guy that was selected by the warranty company to come fix it and we were told that this is a problem with the machine and there is no fix to it. I am now stuck with a $500.00 machine that doesnt clean clothes. Hopefully Whirlpool will have so many complaints they will at least find a fix to this machine. In the meantime dont waste your money like I did.

We purchased 2 whirlpool commercial coin operated washer machines and both computer boards had to be replaced twice each - model CAE2743bqo and CAE27438qd.

Beware to those who are in the market for a new washing machine. I am reviewing the product not the retailer. The lack of the agitator on the machine has left the consumer very agitated! I have called Whirlpool in the first year at least three times for them to come look at it and see the pictures of the clothes. It rips but the response basically is, “It cant be helped maam.” Here is what it does: When you do a load of shirts the sleeves tangle so much your clothes rip You can do approximately 3- towels or it won’t spin correctly. A load takes forever! Now I have been doing laundry for over 40 years so I know how to do a load and I have never been so disappointed in a product I could not return, why you ask because they say there is nothing wrong with the machine. Dont do it! So Whirlpool get a 0 star rating from me but I have to give it one for this review to move forward.

Washer, barely 6 months old, purchased at Lowes. While my washer cleans and I am happy with it, my washer started making loud noises during the spin cycle. I called Lowes warranty service approx 9/26/13; tech scheduled for 10/8, over a week later. Diagnosis: stripped bearings; total bearings and all tub components must be replaced. Parts ordered to be delivered to my door. Cost of washer: approx $800. Cost of parts: over $1600. Washer cannot be replaced until they have attempted to fix it at least 3 times. Repairman returns on 10/18 to repair. Oops, large plastic tub component shipped broken from manufacturer. Reorder parts for repair on 10/29. Finally a repair BUT A&E left the large tub part saying they had no room to take the part. So now Lowes is trying to arrange to dispose of the huge part sitting in my home. I live in a condo so the part cannot be disposed of in our facility. This has been a nightmare to fix and while customer service was cordial, they were totally unable to provide what is considered excellent customer service. So whose fault is it? I have missed several hours of work to try to get this taken care of. I spent money visiting a laundromat for over a month. I am the customer and guess what that means? Nothing! Now my concern is getting that large part out of my home and whether to buy an extended warranty OR just throw it out if it breaks. Very dissatisfied customer! And no the warranty for this major part overhaul is not a year from installation..... my warranty still starts the day of purchase. Are you serious? My advice: ask your friends about their appliances & esp service if they received it.

I wrote down names, but I will not say them here. I found many recall sites on Whirlpool Cabrio WTW6200vwo for washer tub bearings. Which mine are bad. I called and logged my complaint but they say they have NO recall on any of their products and will send someone out but will charge me a service call unwarranted and parts if needed. I told them there are many websites that recall their tub bearings but they refused to fix the problem on recall. I dont have photos due to bearings are under the tub.

I purchased Whirlpool gas range with AquaLift Self Cleaning Tech exactly a year ago. DOES NOT WORK!!! The only Self that cleans will be you on your hands and knees. Still dont know what to use. Manual says do not use oven cleaner or abrasive or you void the warranty. Ok Whirlpool any suggestions? Soap and mild detergent not cutting it. You would think with all the customers complaining about this feature the bright engineers that designed this would come up with a solution.

In January 2011, we bought several appliances and a refrigerator was one of them. The model number is G15VAXVQ01 which is a side by side, French Door Ref with water and ice on outside. We have had problems with the very cheap plastic drawers that are at the bottom of the refrigerator to hold vegetables and meat. We have to be extremely careful so they will not break when opening the drawers. As of late, the fruit and vegetables have been freezing. I went to change the temperature on the outside gauge and dropped the control to 33 degrees and it stuck there. I tried to unplug the refrigerator to reboot the system, to no avail. The temperature is stuck at 33 degrees which will freeze most of our food in a few hours. The freezer side temperature gauge does work.We also have problems with the ice/water machine. I pushed the water button a week ago and from then on, I couldnt get the ice to come on. I did unplug the refrigerator to reboot and then I was able to switch over to the ice, but I could not get back to the water side. Also, there is no crusher on this machine so the ice comes out in chunks. If we had to do over again, we would not buy a Whirlpool as it appears that they are not interested anymore in quality products and consider cheap junk something to be desired. Not by us! We will get this albatross fixed and see about getting rid of it. It is a buyer beware market so I suggest others beware of Whirlpool products.

First F1 symbol on washer took 6 months to resolve. All we needed was new motherboard and couldnt mail it to us even though we could replace. It had to be an authorized person. Well we had one and they never put him in the system. Finally got that taken care of, 6 months of having to press pause and restart 5 times just to do one load. Arrrrrggggghhhh! Now water leaking out the bottom. Called again, on hold, then on hold again to be transferred to tech support. Yeah, right. No tech support. Talked to management, they could care less about us even though we have other products from them. Dont buy, they are lemons. We had ropes for 15 years and lasted through everything. Thanks Whirlpool, heres to losing a customer!!!!

Whirlpool refrigerators with bottom freezers have a major defect in a tiny drainage hole hidden inside the back panel. The hole easily gets blocked with bits of debris during manufacturing or with a few bread crumbs, then it freezes shut. Then water ends up all over your floor. You cannot fix it yourself as you have to take apart the whole freezer. The repair bill is huge. This will happen often. Check on the internet and YouTube to verify & you will see that this happens to everyone with a Whirlpool. Also your floor will be ruined if you dont mop it up every few days until the repairman arrives! Stay away from Whirlpool!!

I purchased a new Whirlpool washer and dryer (model number WED9250WR0 #WFW9250WR00). The washer broke after about 2 months. They took my washer and gave me some off brand one, because I purchased a 5 year extended warranty. They kept my washer for over 3 months, saying that the manufacturer takes that long to get the parts in. Its ridiculous! The tub, seal, and some other parts had to be replaced. It was shredding my clothing and my bedding. The first time they fixed it, a couple days later, it started making a horrible noise. The repairman came out, and a part had fallen off inside, so he put it back on. It kept happening, so I called them back, and he taped the part on!About 2 months later, the seal started shredding, and so did my clothing. I called again, and they had to replace the seal again. It still sounds off balance, and they said that was normal, because of the give in the floor. The day they fixed the seal, I washed a childs sleeping bag, and it shredded it too! I called again, and they refused to replace it, and they want to come and look at it again. My dryer lint trap seal also keeps coming apart, and I have gone through 3 of those in less than 8 months. They said they are just made poorly, so it will keep happening. I just want my money back, and buy a different washer and dryer somewhere else. I had an old pair that I bought, used, and they lasted me 5 years with less problems than these that I paid two grand for.

My Whirlpool Cabrio WTW5550xw0 has had many problems. It started with the lid lock error, replaced it, lasted about 2 weeks, and got another one. I did the diagnostic test that pointed me to the actuator, replaced it. It worked for 2 weeks, got another one, and then another one. I was getting a bad reading from the control panel, replaced it, and that worked for a while. I found out that the actuator had a little water drops on it. I figured that it must be the tub seal, so I replaced it. That lasted about a week and a half, and it started dripping again. Now, I figured it is that the transmission has bad bearings, that causes my tub seal to leak, that causes water drips to go onto my actuator, causing a failure in that, which can give me all kinds of bad readings on the diagnostic test. I have replaced at least half the cost of the original purchase price on a year and a half old washer. I also bought my son a Whirlpool Cabrio washer a few months before I bought mine, and he hasnt had a single problem.

Whirlpool washer is junk. Expired I. Less than 4 years. Cost to repair is more than new washer. DO NOT PURCHASE WHIRLPOOL PRODUCTS. Agitator motor burned up without notice. No troubleshooter problem. 2 repairmen suggested I buy new washer.

Bought the Whirlpool Duet washing machine. It lasted around eight years. In the meantime I was replacing the rubber door seal cleaning out the pump constantly. The plastic pieces inside the drum all broke. Every few months I would get an error code. And During spin cycle it would literally shake my entire house. The problem with all the front loaders is the construction of the drum and the drum bracket. They are made of dissimilar materials. (Stainless and zinc) When you add soap to the water then the bracket becomes an anode and the drum becomes a cathode, which creates electrolysis which corrodes the bracket. When the bracket breaks your machine is totaled. I’m finished with every manufacture except Speed Queen. I bought a Top loader Speed Queen and I love it, it is built like a tank.

We purchased Whirlpool Cabrio Washer WTW5600 series in October of 2010. I bought the machine from Sears and also bought the extended warranty. Less than 6 months after I had been using it, I noticed that all my husband’s shirts were getting sweat stains under the arms and my hand towels were very smelly after drying with them one time. I called Sears to have someone come out and tell us what the problem was. He said I was using too much detergent so I reduced the amount of what I was using. It did not help the problem so I started using the extra rinse each time I washed, still did not fix the problem. I called them out 3 more times in 2011. One tech told me I was still using too much detergent so I reduced down to 1 tablespoon like he suggested. I stopped using softener in my washer because he said I needed to clean my machine more than one time a month, to clean it every 3 weeks. No solution to the problem still. I have had a tech from Sears and one from Whirlpool (who incidentally was the same man, he was from A&E Appliances). When he came in the door, my husband told him he had been here before and I said 2 times. He lied and said he had not been out before. Are we blind? No. He ran the cycle but sat in his truck while he was running it. None of the techs have ever put a tool on the machine to check if the water level is right. They just stand there and tell us to change the amount of detergent or clean the machine with Clorox more often. I cleaned it 8 days in a row and the clothes still smell and still do not get cleaned. We talked to main man at Whirlpool and said they couldnt do anything because their 1 year warranty had run out. We have been using Whirlpool appliances for over 30 years but I will not ever buy another one. I have probably had 5 Whirlpool washers over the years but never had a problem until we got this Cabrio top loader without an agitator. I would not recommend this washer to my worst enemy, if I had one.

We bought this Whirlpool Cabrio washer 2 years ago and have hated it since the first load. It does not clean clothes, and the so-called large capacity will barely clean 5 regular towels. And if you wash diapers, do not buy this washer. If a load is really dirty, you have to wash it 2 or 3 times for clothes to be clean. Then, there is the awful mildewy, moldy smell after a few washes. How can a washer that gets so bacteria-laden be allowed to be sold on the market. Ive been washing laundry for 45 years, and Ive never had this kind of wash-related problems. This washer is an overpriced nightmare. I cannot wait until I can save enough to replace it. And I am watching and hoping a class action suit comes out to force Whirlpool to take these washers back, refund the money spent, and apologize to all the people who purchased one.

I purchased a Whirlpool dishwasher from Home Depot on 2/5/2015. It was delivered damaged on 2/9/2015. Home Depot refused to take it back and Whirlpool sent a tech out to see the damage. I told them I did not want a refurbished dishwasher that I paid almost $1000 for. Whirlpool advised Home Depot that the machine can be repaired. Once again I told both whirlpool and Home Depot that I did not want this dishwasher and to pick it up. Home Depot stated that there would be a 15 percent restocking fee along with a $65 to pick up the washer. Why should we have to pay anything? I am so disgusted for the treatment I received.

Got a simple error code E6 F2 on the display of my oven (only 8 years old). Called Whirlpool to schedule a repair. They told me there were no available dates for one of their techs to fix my unit. They referred me to 3 outside companies that wanted to charge me over $100 just to come out and take a look. One of the phone numbers to the companies they referred me to was a wrong number. I asked them to tell me what the error code means and they said they couldnt tell me with any degree of accuracy. (What use is an error code, then??!!) I checked all over the internet and different websites say it might be a control board (over $300 for the part) issue. But several techs also said that it is a crap shoot and could also be a Temperature Sensor. I called back Whirlpool to see if they could get me a deal on the part. But, guess what? They dont sell it anymore...in fact they dont even sell their own parts at all!! And, they transferred me to some outside company that refused to even give me part numbers, to avoid me shopping for a better deal (which I did end up finding on Amazon after number 6 below). I called back Whirlpool and after getting transferred around to 2-3 different people and wasting about an hour I finally got someone who finally wanted to just give me whatever decent service they could and they finally got me the part numbers of the 2 different control boards (Main Control Unit and Sister board that controls the locking mechanism, $367 and $140 respectively). Now I am faced with paying an Appliance Repair person over $500 for what seems to me is a BIG FAT LEMON of an appliance due to the sheer number of unsatisfied people that are having the same issue, have had it fixed, and had the error just return again. THUS.... WHIRLPOOL AND THEIR CUSTOMER SERVICE AND THEIR PRODUCTS JUST SUCK!! AND I WOULD NOT RECOMMEND THEM TO ANYONE! THE LEAST THEIR COMPANY COULD DO IS TRY TO HELP FIX THE PROBLEM, NOT EXACERBATE IT BY GIVING SHADY CUSTOMER SERVICE AND REFUSING TO HELP FIX THE PROBLEM!!!

I agree with all the other reviews listed here! How in the world is a washer to get clothes clean when there is no agitation? Or enough water to even cover the clothes? This is a complete waste of time, one cycle can take an hour or more, because the extra rinse cycle is necessary. And it takes 20 minutes to just sense the load. What a crock. And yes my clothes smell also. Please any recourse besides buying a new washer? Does Whirlpool stand by the product?

I have raised complaint regarding my refrigerator and changed compressor and they given me 1 year warranty but after 3 days again compressor gone and they have came and replaced that and taken service charge. Again after one month compressor giving problem and freeze is not getting defrost.. Again I called to customer care but again they want Visiting charge.. Really pathetic Service I ever seen. And customer care people does not know how to handle client and repeating same line. Dont buy anything from Whirlpool.. its worst service provider.

I first want to begin by saying that we have been a Whirlpool family for years. I now own a Whirlpool microwave, hot water heater, washer/dryer, Jenn-Air stove and dishwasher. My problem now is with the Cabrio Washer purchased in 2008. I started having problems in 2011 and the same problem has raised its ugly head again. When I try to use the Clean cycle, it starts at a 60-minute cycle and goes down to a 2-minute cycle in 3 minutes without cleaning or even running water into the tub. This time, it made a terrible noise and stopped. The tub was replaced in July 2011 after having the same complaint as above. The repairman said that the mechanism on the tub to fit into the spinning cycle is made of plastic and is not holding up. Also, in March 2012, a new control board was installed. I spoke to Whirlpool Customer Service and they informed me that they did not have any other complaints about the Clean cycle and that I should call the repairman. Luckily, I purchased an extended warranty. I vote a thumbs down on the Cabrio washer.

Switched to bottom freezer and love the size. We all use and enjoy the filtered water. Whirlpool has proven to be a manufacturer I will always consider when making major appliance purchases for performance, service, and dependability.

Bought a Whirlpool fridge (WRF560SFHZ) 3.5 years old not cheap! Suddenly one day, the freezer drawer cannot close properly. Since it broke down on a long weekend, I have to wait 3 days in order to contact Whirlpool customer services. And then wait for another 4 days for them to send a technician. The technician advised it is a screw on the rail fall down and he fixed it and charged as 115CAD repairing fee (for a loose screw). He said it is a product defect from Whirlpool and that we should call Whirlpool to ask for a refund.Of course after a long wait from the hotline, Whirlpool refused to refund, saying that, It is not within warranty period and it is perfectly normal that you paid for 17** CAD fridge and can only used for 3,5 years and that things happens (screw can get loose). The service rep. even said, You bought it, it is your property now... And they dont care you have to throw away food in the freezer since the door cannot be closed. And of course they refuse to admit that the product has an inherent defect... Will never buy this brand ever again!

FRUSTRATION!!! It is unbelievable that even appliances have become DISPOSABLE! Where are the days of when our parents bought well made appliances that LASTED 20 years with NO problems??? There was satisfaction knowing that a purchase of an appliance was $$ well spent! These days it costs MORE to replace parts than IF you purchased a brand new machine! We purchased BRAND NEW Whirlpool Duet Sport Washer AND dryer in 2007. The washer has been repaired a total of 5 times and the dryer 3 times!!! IN A SPAN OF 10 YEARS! Are you serious?! With the $$ spent on warranties/ labor/ parts: WE could have purchased new appliances. What is WRONG with this picture? IT IS ALL about making money on REPLACING PARTS/WARRANTIES/LABOR!!! Forget the consumer that is spending THEIR hard earned money to buy the appliances initially. Short of going to a laundromat, the consumer needs to purchase a washer & dryer. So I guess it is a vicious cycle of REPAIRS/REPAIRS AND MORE REPAIRS!!!

Weve been in our new home less than a year and a half and our brand new Whirlpool French door fridge is dead. Service is a week away. Updates to follow.

The duet washer is just over one year old and started showing F25 code on screen. It had been making a really loud noise in the spin cycle. Last week, a really loud noise and then the loads wouldnt be spun. There was a puddle of water on the floor near the machine. We had a repairman out today and he stated that theyre repairing these machines all the time. He stated it was the bearing and that theyd been told that Whirlpool had installed bad bearing from a different supplier. I called the Whirlpool experience and after 4 minutes and 19 seconds, I actually spoke with a service rep. She said since my machine is less than one month over the one year warranty, Id have to call the extended warranty people. I asked for a supervisor and after 2 minutes and 38 seconds, she came in line and wouldnt budge from her story. They also stated that there are no service issues with this model washer. Extremely poor attitude and Whirlpool is doing everyone, whoever purchased a duet washer, a terrible job on these washers. At least, Ive now found out that there are a lot of other folks out there with the same problem. We need to get some attorneys to start a class action just like the mold/smell customers did already. Sad, sad day for Whirlpool as Id been a customer all my life.

we bought a hotwater heater and it gets scalding hot set on the low setting, we had the gas valve replaced by a@e paid for by whirlpool. It still gets above 125 degrees,set on vacation with me using it all during the day.I have contacted them several times, they told me to let the hotwater run about 10 minutes everyday, or just turn the heater off and let it cool off. I bought a water heater to use not light the pilot everytime I need hot water.

I bought a Whirlpool WFW9470 Front Loader Washing Machine 11 months ago. The washer appears to complete a wash cycle but leaves the washing wet and with no error message or light. Whirlpool says the machine is not designed for light loads. The technician says washing on a light load will damage the bearing. We had the spin bearing replaced after 8 months. But still, the washing remains wet and the bearing wears out prematurely.

The pilot light on our hot water heater will not stay lit. We cant find the custom made Replacement Kit at any local retail locations, including a specialty appliance repair store, Lowe’s or Home Depot. So our only option seems to be waiting for the part to come in the mail. Meanwhile, my two little girls have no hot water in their home! Not because we couldnt afford to pay the gas bill, but because of the piece of junk hot water heater that we purchased and the lousy company that stands behind it!

Amazing pice. Would recommend to anyone. The heat is great. The oven is amazing. I got this for my birthday and my kids were helping me to get it and I was so excited to receive it I was crying. Amazing machine, wish I had two. Would definitely buy again. I especially love how clean the oven top looks and how the knobs for the burners are easy to use.

I purchased the Whirlpool Cabrio, Model no. WTW5640XW2, on March 3, 2012. I have tried every setting and water temperature and am totally dissatisfied with the washer. It does not clean clothes, tangles them into a twisted mess which requires that they be vigorously shaken out, destroys anything with a draw string. I had an online chat with a representative and was told she was sorry. I posted to Facebook and did receive a call from a repairman, which I will return; however, I do not anticipate receiving any satisfaction. The machine is worthless for washing clothes. I was better off with my 12-year old agitator Whirlpool washer. I do not understand how this machine can be allowed to stay on the market. Id be better off at the river beating my clothes against rocks. I hope someone will get on Whirlpool to give consumer refunds. I have been brought to tears by this machine and I am one tough cookie. Please help!

Aqualift self clean oven??? I followed the directions on how to clean my oven. I wiped and scraped out spilled residue from the oven. Then started the cleaning process. The sides of the oven were not cleaned even when I wiped them with a damp cloth. Scrubbing and scraping with the tools that came with the oven helped somewhat. The bottom of the oven was not cleaned. I had to continually scrub and scrape to get it looking half clean and even then, there were still spots that would not clean away. I would have preferred an oven that uses oven cleaner, it gets the oven much cleaner and with less scrubbing on my part. All in all I am very dissatisfied with the oven and would never recommend it.

We purchase all Whirlpool appliances for our new house in Florida in late 2015 from Good Deals Appliances. First repair before 1 wk in-house was the dishwasher. Wires were not connected. Now it is the refrigerator (French door refrigerator model K44913210). We reached out where we purchase the appliances and they gave a number of repairman to connect. He came and told us the compressor & evaporator & valve needed replacement, We found that hard to believe that a 2-yr-old refrigerator needed all this repair. Called another repairman to hear same thing. We were also told this problem is so common with this model. Called Whirlpool. They sent a repairman out. Said same thing first two said. They are paying for parts but not labor. We were told by last repairman that this refrigerator hasnt worked from day one. Passed info to Whirlpool and no comment. We paid a lot of money for an upgraded refrigerator to have it quit in 2 years. Totally not acceptable. On top of this the parts may not work for more than 2 years again. Okay Whirlpool who is going to pay for all the ice & dry ice, the other two repairmen that came. The repairman you sent was double the price of other 2 & will not come back till we pay. We will pass our experience with Whirlpool on to all friends and friends of friends.

I bought the Whirlpool mini frig from Target 3 years ago thinking it was made by whirlpool in USA!!!! 1) not really made by whirlpool!! Made by Glantz from China. Common deception of USA and Chinese mfg to fool consumers is to license a well knownBrand to glantz in china. Glantz mfg almost all mini frigs under dozens of well known brands. Federal Trade Commission should ban this kind of deceptive marketing. Complain to the FTC Wash DC!!! 2) Chinese mfg gantz mfg defects and how I fixed them: A) back of freezer compartment open, freezer does not freeze B) 45f inside not 40f!!! C) defective thermostat remedies: 1) aluminum foil to seal back freezer 2) weather stripping around door to bring temp from f45 to 40f.D) used Youtube video to adjust defective thermostat, until I can find a replacement thermostat!!! Dys videos: watch youtube repair videos before you trash your frig. 2) check the country of origin, if its made in china, it will not last very long!! 3) buy an extended warranty for any chinese product. You can buy generic frig replacement parts on eBay!!Yes chinese products are cheap, but they do not last!!! One good thing!!! This is a very quiet frig.

Our recently purchased stove top is an average appliance. The surface is easily scratched just from paper towels when cleaning. Today for no apparent reason the igniters all started firing and continued for a good hour....I would definitely investigate other brands before purchasing again.

It is a very reliable and efficient washing machine. I enjoy the energy saving features as well as how clean my laundry is, no matter how soiled they may be. I would definitely recommend a Whirlpool washing machine to a friend.

We have had this microwave 3 years. The first thing we noticed was that baked potatoes were way overdone and nothing heated up correctly when using the sensor Not a big deal - just stopped using the sensor button. Now, we keep getting the open/close door message keeps coming up. I have done all the recommended fixes with no luck. Now we need to have a repairman come out to fix it. It seems when you are paying over $300.00 for a microwave, it should last longer. If I had known it would be such a poor quality, I would have bought a less expensive one and definitely a different brand. We do not use a microwave on a daily basis, so it certainly did not crap out from overuse. I would not recommend this to anyone. Save your money or you will be spending much more on repairs.

Light bulb went out in the freezer. Come to find it is a led cluster with a circuit board only cost $30 to $100. Engineer should be fired. What is the reason to take simple bulb and custom bastardize into an expensive hybrid. Greed.

Whirlpool French Door Plus 3 drawers: This MSRP $3400 refrigerator has great features. Great ice makers. No issues up top. First 18 months were great. 4 repairs in the past 11 months. All freezer temp issues. We had noticed a number of ice sparkles forming on our unopened food. Frozen fruit was mushy. Temp usually read 0 degrees. One day I opened it and the temp was 40. Two hours later, it was close to 0. I started monitoring it closely. High temperatures occurred around noon. Zero degrees most of the time. After the third repair, service tech called Whirlpool and found part was redesigned. New part didn’t help. We understand the freezer has a heater in it, to defrost. The heater stays on too long. That explains why the freezer temp went as high as 50 degrees, while the fridge was perfect.I purchased this at Lowes. I always buy Lowes extended warranties. Thankfully, they bought back my 30 month old refrigerator. Kudos to Lowes warranty company. Never put on long holds. Fast response. I noticed the price for the warranty on refrigerators in this price range has increased by $100. Reflects a lot of repairs on refrigerator models. One thing though. I learned 3 repairs within a 30 day period is considered one repair, for purposes of their lemon policy. I will also add that the warranty company reimburses you 50% of the cost of filters. Simple process. I have read complaints that they make it too difficult to collect. That is just not true. Have been reimbursed $100 for filters to date. In 5 years, Even at the increased price, the savings will pay for the warranty. No brainer.

We purchased a Whirlpool gas range for $600 in Aug 2015.. On May 2015 the range had an internal board failure (F2E0) and the panel does not control the oven or other features. We found out the part ranged from $350-$400!! Plus service installation! The one year warranty of course ran out but I think this is an outrage to sell an appliance that has such a poor electronic part. I have read a few similar complaints as this is also a Frigidaire model as well.

I have the same problems as the ones listed in complaint section. I bought 4 Whirlpool products at the same time: refrigerator, stove, and the Whirlpool duet. Washer is a front loader. We have had nothing but trouble. The company we bought the machine from exchanged the washer for the same model because the electrical was bad and the parts to replace were back ordered for more than 3 months. We are now having problems with the exchange washer. This time it is the same as the engineer remarked in his complaint the bearings are bad and it sounds like a jet taking off. It’s that loud.I went down to the place of purchase and I am in the process for the repair. I have a feeling this will not end well. Whirlpool, if you call them, gives you a run around or tells you they dont have you listed in there computer. We dont have the money to replace any of this. This new machine is only 9 months old. Whirlpool is making a killing off of fixed income people and the working class. You tell me who can afford the cost of that kind of repair or the cost of a new machine that only works for a couple of months. Why is 60 Minutes not on them like a bad smell?

I purchased our brand new double ovens on 9/27/11. I was happy until 11/3/11 when the inside glass exploded, shooting shards of it all over our kitchen during the self-cleaning cycle. I immediately called Kitchen Aides corporate office in Michigan. She said that she could send a technician out to access the damages but didnt see that this was a product issue. Like I dont know how to properly push buttons to self clean! The technician came out the next day and said that he was only authorized to replace the glass, nothing else. He couldnt tell me why it shattered, he thought perhaps there was a bubble in the glass during manufacturing. I said I think it needs a whole new door at the very least, but more likely a new unit. I just paid $3000 for what will be a refurbished oven after one month of use. Today, I called once again to tell them that I am not satisfied with new glass, not to mention my oven is unusable in its current state and still has glass sipping out. I spoke to a woman in their safety committee department, who told me that Whirlpools warranty is replacement of broken parts, nothing more, and since only one pane of glass broke and not the door physically, they couldnt authorize a new door or new oven. Mind you, that we still dont know why it broke, was it just faulty glass or could it be a heating problem? She didnt care, only that they could only repair the glass. I asked if the glass could be overnighted since I have been without an oven for four days now. She said that she had no way of doing that, so I asked if I could speak to the parts department and she said I could not, that only techs could contact them. I asked if she could do anything for me? Could she assure me that it would be fixed within the week? No. Could she assure me that it would be fixed by Thanksgiving? No. Whirlpools policy clearly is that once you purchase their products, they have no intentions of listening to their customers complaints or concerns only to do the very minimum required.

My wife and I have had a Whirlpool Gold 5.8 cu ft gas range for just 5 months and have already begun to have intermittent trouble with it. She can use the oven to bake cookies in the afternoon and then try to bake dinner a couple of hours later and the oven will not preheat no matter how long she waits!! This has happened three times now and we are waiting for a service technician to come out.. Pretty sad when you buy a top of the line appliance and begin to have trouble so soon.

I love my washer and dryer but am a little disappointed in a few areas. First, my washer stopped spinning normally after a few years, I forget exactly why. Then my clothes were too wet when it was done. My dryer then did not get my clothes dry in one cycle. Also, it was going to cost $500 to fix my washer which wasnt worth it. But Whirlpool did send us a new tub and all the parts for free. Thankfully my husband is handy and after finding a YouTube video, replaced it all and now it works again. My dryer still doesnt always dry everything all the way. I often have to do 2-3 cycles in the dryer to get my clothes dry. I thought there was supposed to be a sensor that would keep the dryer going until there was no more moisture. Maybe that is broken too.

Purchased Whirlpool washing machine two years ago but transformed into junk within two years. Fraud company only searching ways to loot the money of the innocent customers and manufacturing such appliances which greasing mentally.

We purchased a Whirlpool Cabrio washer and dryer set in 2013. In 11 months we have made at least 6 calls concerning the same issues machine leaving white residue on clothes. It has been one thing after another. Today the manager told me that my warranty only covered parts and not a replacement machine. I am washing my clothes two or three times to get them so we can wear them. First this is not saving water, energy, time and most of all CLOTHES. We are wearing our clothes out washing them. This is unacceptable. With this many complaints, the company has to know they have a machine with issues. I will never purchase Whirlpool again. I think we should all band together and file an action against Whirlpool. These machine cost too much money to be crappy.

Purchased a Whirlpool Cabrio washing machine from Sears in August 2010. Last week, while my wife was washing clothes, we smelled smoke and the washing machine stopped working in mid cycle. Called Sears repair and came out Saturday 10/10/2015 to inspect the machine. When the repairman checked the codes he determined there was a problem with the motor. When he lifted the machine up the capacitor fell out in 2 pieces. It had blown apart and the motor had burned up. The estimated repair bill was $480.00. Needless to say we did not repair the machine. We will never buy another Whirlpool product or any other product that they manufacture under a different name.

We have front loaders. Far, far less damaging to the clothing than a top loader with agitator, would never go back to top loader. That comes with a caveat though. There is a difference you may not realize between the two styles. With a front loader comes a little maintenance. You will need to clean the washer periodically. Most all the stores sell the cleaning tablets and no, not all cleaners are created equal. I will only use Affresh after testing most of them. With a front loader there is always some water in the bottom of the drum, even after the cycle ends and even when it looks empty. So if you wash real dirty or smelly things, you’ll want to run an empty cycle to rinse out that leftover water or run with cleaner.In between wash days you’ll need to leave the door open so it doesn’t mold or mildew. The door gasket/seals will show mold and mildew and or you’ll get a mildew smell in your clothing. The only issues we’ve had with these units were the learning curve on front loaders in general and with the dryer we had the water valve for the steam function stick open (after 5 years) but it was due to calcium build up from our well water, not a issue with the machine itself.The dryer lint screen could be better. It is vertical so as the lint builds up during a cycle it drops to the bottom and accumulated at the bottom falling off as you pull it out each time to clean it. The lint catches on a crazy amount of extrusions inside the lint trap which also makes it nearly impossible to get down in and effectively clean all the crap out. One last thing if youre changing from top to front loaders. Buy the peristalsis, they’re expensive but it’s a pain in the butt to get stuff out if you don’t have them. Overall we’ve been very happy with our Whirlpool front loaders and would confidently recommend them to you.

I thought the new AquaLift cleaning would be the greatest. Boy, was I disappointed -- no thoroughly disgusted and very angry -- when I tried to use the self cleaning oven. I had cooked a prime rib roast and a lot of grease had spattered inside the oven. I wiped away the excess and did a cleaning cycle -- what a joke! There was still grease running down the door and walls. Nothing was changed after two cleaning cycles. Now I have to crawl inside the oven and scrub it manually. I was always pleased with the old self cleaning ovens which only left some ash and a little bit to clean up. The AquaLift technology doesnt work at all, didnt Whirlpool test it prior to selling it to the public? They will surely lose my business and I hope a lot of other peoples business as well. This technology was a huge mistake!!

I bought my microwave on Dec. 8, 2010 and paid to have it installed. On June 29, 2011, the microwave quit heating anything up so I called Whirlpool. They sent a technician out and he repaired the magnetron. The tech said it was defective. I accepted that but then on Nov. 8, 2011, the microwave quit again, same problem. I called Whirlpool and told them I thought it was a lemon and wanted it replaced but they refused and said that they paid to have it fixed. They came out and fixed it. Same problem, the magnetron. Well, here we are another six months later, it has quit again. I have been on the phone with Whirlpool. I spoke to a lady named Barbara and she said even though its out of warranty, they would be willing to pay for the parts, not the labor. Of course, labor is more than the parts. So, I asked her whats going to happen another six months from here on. When it goes out again, she said that that was it. They werent paying for any more parts. I asked her for her supervisors number. She advised me to write a letter and someone would call me. Well, a lady named Donna did call and she told me the same thing. They would pay for parts but not labor and the offer was only good for 30 days. Also, I have the tech talk to their techs but she didnt have the number and maybe they could find the problem. Well, the problem is its defective. Thats all there is to it. We could fix it over and over again but its going to keep burning out. I told Donna surely I cant be the only one complaining about this microwave and her response was theres no recall on it. Something needs to happen. This cant be right. We spent hard-earned money on this product and shouldnt have such a problem every six months.

Horrible. We purchased the set In October 2010. It worked great for a little over a year. (Go figure, just out of the manufacturers warranty.) The washer stopped spinning out water. Every other cycle completes successfully. The diagnostic cycle is also successful but once there is clothes in the machine, it wont spin. I called customer service and was told that a one year warranty was $230 and service is $130 plus parts. After reading another horror story, it seems that this venture is going to cost us around $450 for a new circuit board. Where is that class action suit at again?

Whirlpool tells its technicians that the front molding piece on their dryers is a disposable part . Basically, it has to be removed to examine the console and removing it will break it 90% of the time. Therefore, the customer will have to replace a $100.00 part simply to diagnose any problems. I now have a dryer with no front panel simply because I wanted to know why a button was sticking.

Whirlpool is an awesome fridge. There was plenty of room for everything. I loved the freezer part too. I would love to have another one because mine was in a fire in 2015. You will like Whirlpool.

We purchased the Whirlpool Double Oven Range model GGG388LXS in April of 2011. The reason we purchased the oven is that we are empty nesters. We almost exclusively use the small top oven. We have streaks between the double glass on the bottom oven. We can not clean it. It is obviously a design flaw. I looked on this site to see if others have the same problem as it is too early to talk to customer service at Whirlpool. How have others fared with this obvious flaw?

Weve had our Whirlpool Cabrio washer and dryer just over a year. I like them both but then we are having problems with our lid. The first one cracked after 9 months and they replaced the lid. Two months later, the new one cracked and they replaced the hinges and lid again. I assure you we are very careful when lowering and lifting the lid. I do 80% and my husband does 20%, and we are very cautious of it especially after the second one broke. Now, I was just putting laundry in and the third one cracked while lifting the lid. There is obviously a problem, and Im wondering if anyone else is having the same issues. Eventually, it will crack all the way through which will cause the glass to pop up and the lid wont lock. I will not buy anything with a glass lid again!

I would like to invite everyone on here to join me in a moment of silence. My Cabrio has died after a little over 2 years of pure torture that I purchased for $1000 from Lowes. I have had nothing but problems since the day I bought this washer. I think Whirlpool needs to step up to the plate and take responsibility for the mistakes they have made. I will never purchase another product that is in anyway associated with the Whirlpool company. I wish I had my little washer that only needed a new switch back. I guess I am off to find a replacement for this $1000 mistake that I made. If I had the resources, I would file a lawsuit against Whirlpool myself.

Approximately 2 years after purchasing a Whirlpool Gold side-by-side/counter depth refrigerator, I noticed cracks on the interior walls. This was in 2011. First, I contacted the service contract people. They told me this was not covered under the policy. Next, I wrote & called the company. They told me they could send someone out to EPOXY the walls. I told them this was not at all acceptable to me and that I believe this is a defective product. I have never heard of this happening to a refrigerator. I am also quite concerned that there are toxins emitted through these cracks. After a time with no response, I wrote them again.This time, they referred me to Ms. Alicia ** at the Exec. Offices. She wrote asking me to call her. After making several calls & leaving messages to no avail, I wrote her asking that she kindly write back to inform me what the company was going to do about this defective product. I cant help thinking they did not want to commit to anything in a letter because I never heard from her or anyone else at Whirlpool. Small Claims Court cannot help as the company does not have an office in New York. I am very worried about the possible health hazard this possesses. I am very careful to completely cover all food inside the refrigerator. At this point, the cracks have increased in size and new ones have appeared. I am very upset over the lack of concern and lack of response from Whirlpool.Ive owned many Whirlpool appliances through the years and trusted the brand. This is not a cheap appliance. Consumers dont expect to spend a few thousand dollars on a product just to dump it in a year or two. Given the size of the Whirlpool Corp., anyone would think they would simply replace their defective product to keep their reputation if not for the health concern of their customers, which should be a priority. Over the past few years, I have had increased respiratory problems and so have other family members. I believe its due to the emissions from the cracks. I will have to dump this defective refrigerator before it gives me cancer! Thanks Whirlpool, great doing business with you.

I just bought a new dishwasher because my 5-year-old one went out, model number DU1145XTPBA. After pulling the old one out, I took the motor out and lo and behold, what did I find but bad bearings. The motor was fine, just the bearings were rusted out and were jamming the motor so that it wouldnt move. The price of a new motor, $149.00. Well thats a bit much for something that only lasts 5 years. I went on eBay and found them for $70 to $170.00. So if you have a problem where your dish wont wash at all but fills up with water, it may be nothing more than cheap bearings in the motor. If I, myself, were this companys CEO i would really consider changing companies that they have making these motors or at least the bearings. Just wanted you to know that this is the only problem I have had with this one and Im going to replace the motor now that I know what it is. Thank you Whirlpool for a day spending repairing and replacing one of your dishwashers. I learned a lot.

Bought a Whirlpool Cabrio washer and dryer 5 years ago and with only 2 adults and 4 washes per week, it broke down twice needing new motherboards each time and, of course, Whirlpool would not take any responsibility as the 1 year warranty had past! I will not buy another Whirlpool!

I purchased GMH6185XVS microwave in Dec. 2011. It was installed in January 2012. This was for a remodel kitchen with all Whirlpool appliances. In August 2014, we discovered the micro would not heat. I called Whirlpool as directed by Sears. I am told I have to call a repair service and pay for it. I have a 14 year old Whirlpool in my home. We have never had a problem with it. I had a Whirlpool micro in my previous home; never a problem. This is a second home that we hardly ever use. We are two adults. My daughter had the same problem with the same microwave. I am very upset with Sears as well as Whirlpool. Even if I used this machine everyday, it should not break in 2.5 years. Shame on both Whirlpool and Sears. I will never purchase another Whirlpool product again. I will be telling everyone I know.

We purchased the WRX988SIBM00, delivered 6-26-14. Immediately upon plugging it in, we noticed a seemingly loud hum to it. Thought maybe it would go away once the fridge cooled off, but the hum continues. SO sad because I love the features.

I bought the WP Cabrio washer on 10-18-16 from Lowes. It does not wash well, my dark clothing came out with white spots all over them even after I rewashed them x 3 and the lighter clothing you dont see the spots so you are wearing dirty clothes. Also, it is making a lot of noises while running. WP should pull this model off the market.

Whirlpool Refrigerator WRF736sdam13. Purchased from Lowe’s June 2015... freezing started in April 2019. Freezer bottom is not draining correctly and the bottom keeps freezing making it difficult to push door close. I have the extended warranty. This will be the 5th time on Monday, July 29 repair person will come out.I talked to Whirlpool and Lowe’s. The product cannot be considered a lemon because the problem continues to be “fixable” as stated from answering service when I reported the problem again. Customer service has been amazing up to this point. Anyone else have an issue with this model with the bottom freezing solid? Any suggestions?

Whirpool Part #WPW10564292 refrigerator handle - I am a property manager who has 264 units. We have only been open for 1.5 years and have had to replace 30-40 door handles because they crack at the top where screws are. We tried calling Whirlpool Customer Service because obviously this is a defect and she said they looked in the system and didnt see any recall or issues. We also asked for a representative from Whirlpool to stop out so we could show them the issues and she said we have nobody in the area. We have 9 service requests outstanding that need a new refrigerator handle. On July 19th, we ordered 3 handles from our distributor and we were told theyre on back order until September 6th. When I called at the end of August to make sure we were on schedule with delivery, I was informed they are now on back order until November 5th. I just called our part rep. this morning and now they said the current part number does not exists and gave me the new part # W11026870, and they are on back order until mid or end of November. I am not going to keep quiet about this issue. We have paid $79.89 per handle on a refrigerator that is only a 1 to 2 years old appliance. I am requesting a returned call or email on what you are going to be able to do for us. This is not right or fair to a company that spent a large amount of money to have your appliances in 264 units.

I bought a new Whirlpool Top Load Washer four years ago and the paint was peeling off. I called Whirlpool and they offered to sell me a touch-up paint because it was out of warranty. I will never buy one of their products again.

Whirlpool Cabrio, H2 washer system type 588 01, serial # c0303 10 - We have been in our condo 5 years. The washer & dryer was here and new when we moved in. I have been displeased with it from the start. It takes forever to wash through a load, and the clothes are just as dirty after being washed as before. I soaked some whites in Clorox overnight and ran through using Tide and Downy. Then the stains and dirt were still there. I ran them again it was not any better. I had a professional from Hagadorn come. They could not find anything wrong. It cost us about $100.00. Others in our area have the same complaint. I have never been satisfied with this wash. It just does not get the clothes clean. Please help!!!

Just like so many on this site Bought Whirlpool Model #WRF990SLAM02 refrigerator new in 7/2013. Just went on vacation for 2 weeks, I come back and the freezer and ice maker are not working. If what everyone on here are saying is true then it looks like I too will have to purchase a new refrigerator and you can bet it wont be a Whirlpool.

We purchased this washer (Whirlpool Cabrio) about two months ago and we have been extremely dissatisfied with its performance. Quite simply, it does not get clothes or anything else clean! I have tried every possible setting and still the dirt remains on anything that is even slightly soiled. So, I cant believe that things that dont look dirty are getting cleaned either. They probably arent even getting rinsed, even with the extra rinse option. It seems almost nobody likes this machine, so why is Whirlpool risking their formerly sterling company reputation by keeping it on the market? I would be happy if I could return it to the store for a refund, but that is not a possibility as far as I can tell. If you are considering buying this machine - dont!

In October 2009, I purchased a Whirlpool Energy smart gas water heater with flame lock safety system.$509.00 I had it installed on 5/4/2009 by Westmoreland Affordable Plumbing, $218.00. On 10/15 called Whirlpool stating that the upper thermistor was coding as a failure. They sent me another one to replace it on 10/19/2009. On 10/19/2009, 1 and 1/2 hours later, the tank was coding a bad gas valve, called back and told Whirlpool what had happened and that I smelled gas. I shut off the gas to the water heater and waited for a valve replacement to arrive. On 10/21/2009 I had E.H. Plumbing to install the new gas valve to the water heater, $150.00. On 10/28/2009 the new gas valve went bad. I contacted Whirlpool and argued with them until I had them replace the hot water tank. With their approval I went to Lowes and tried to get the same water tank but they no longer sold that model anymore. I was given their equivalent to the one I had purchased earlier. I had it installed on 10/29/2009, $150.00. I now see a class action suit was filed against Whirlpool for the model in 2008. They were still selling this model after the lawsuit???? I spent $1027.00 for a $509 hot water tank and a lot a days without any hot water. I have all my receipts and returned codes for this transaction. Is it possible to get my $300.00 back (for two extra installations) as a result of this problem? I also kept the old gas valve thermostat.

My husband and I purchased a Whirlpool over the range microwave in 2005, model number MIX155XHPT-1 and serial number TR S 30 32419. At first the top vent broke then the opening side broke off. Then the whole side of the closing door broke off. Now the whole door wants to fall off. I would have never expected this from Whirlpool, but it happened.

Whirlpool serviceman came out to see why our brand new dishwasher didnt dry the dishes and left pools of water on glass bottoms. Repairman said all the new dishwashers are like this. The heating elements do not heat hot enough so that the machine gets a higher efficiency rating. He said the solution is to use the dishwasher during the day and at the end of the cycle, open the door so the dishes air dry. My previous 24 year old GE dishwasher did a great job of drying the dishes even when we didnt use the heated dry cycle! The only reason we had to buy a new dishwasher is because we bought a new house. I am very disgusted with the Whirlpool dishwasher. Might as well do dishes by hand.

I purchased a Whirlpool side by side refrigerator and it was delivered on 1/22/22. We had it five weeks working fine then on 2/27/22 it stopped working. Whirlpool service came out and said it was the compressor but all parts are on backorder and no telling when they will be in. Maybe Lowes would replace it, but no because it is longer than 30 days. Lowes when I bought the fridge had over 400 of the same refrigerator in stock so why is it they couldnt had replaced it. Or if Whirlpool sells items on their own why didnt they just replace it. We have been going on 3 weeks without a fridge. With all of this said it didnt even last the 7 years they say they last for now. That is ridiculous when the last one lasted 20 years. In 7 years I will be on a fixed income how am I suppose to keep living. Something is wrong here.

This dishwasher is so far advanced from what came with our new home 18 years ago. It is absolutely the quietest machine. You have to look at the light display to know if it is even running. Its a well thought out unit with the exception of the silverware accommodation. They used a flat low-profile basket attached to the inside of the door. Not accommodating enough space wise. Solved by augmenting the more stars compartmentalized basket that came with the old dishwasher. Would recommend and purchase again in a heartbeat!

I bought a Cabrio washer. Since we bought it, I have had to fix it. The machine is a piece of junk. It looks nice though. After 5 technicians later, our piece of junk is still having problems. We are a poor family with 3 kids who struggle to make ends meet. I feel that this company has taken advantage of the people who put their trust in the so called American company Whirlpool.

We relied on consumer reports as the primary source for a recommendation on this washer. Just under two years old, it started making a noise, which suddenly went away. Then one day the machine would not spin and drain, and we could not decipher the error code into anything useful. I turned the machine over to find that the drive belt was half-on/half off the pulley on the drive motor. This caused the belt to ride against the belt guard and wear right through it. I removed the belt and determined that the cause of the problem was that the large pulley on the drum was loose. For some reason the nut which holds that pulley on was slightly loose, causing the pulley to wobble. Not sure why they didnt use some Loctite on that nut. I put everything back together and tightened the nut. No problems and I checked it a month later, everything was still good. Fast forward to last week, when the machine was not yet 3 years old. Same thing, washer would not spin and drain. Tipped machine over to find that the belt had fallen off, the drum pulley was again loose. But this time the belt had damaged the pulley on the motor. I figured, no problem, just order a new pulley. Well you can buy just the pulley on the drum, but the pulley on the motor is part of the motor, it cannot be ordered by itself. The cheapest I could find the motor online was $250. We decided to cut our losses and buy a new machine. We will NEVER buy another Whirlpool appliance (or anyone elses by the same manufacturer, i.e. Maytag). Our last Kenmore washer lasted 23 years. Oh but it had an agitator and wasnt listed as HE (High Efficiency), so I suppose the environmentalists would get the dry heaves thinking about the impact of that washer on the environment. But it was useful for 23 years. Now this High Efficiency Whirlpool is headed for the recycling pile. Sorry, I think this hurts the environment more than an appliance which just works year after year. Yep, they took a design that worked and now we have energy/water efficient washers that dont last very long and are so expensive to repair that the solution is to just buy a new one.

I purchased Whirlpool Microwave/Convection Oven a little over a year ago. It needed repair four times and the latest repair debacle appears that it will take ~5-6 weeks to get it repaired if the part that comes in works. The microwave model number is GMH6185XVS1. I will never buy another Whirlpool appliance. I spoke with Whirlpool (not the extended warranty company to which I was referred), and they refused to help, period.The extended warranty company (although very nice), werent much help and will continue to attempt repairs until the price of the repair(s) exceeds the value of the microwave no matter how it inconveniences my household.

I have purchased a Whirlpool microwave oven last year (October). It is not working properly now & not heating well. Regarding this I have registered a complaint in the service center & Customer Care but we have not received any reply for this.

I used the Whirlpool website contact form, and described an issue I have with the Cabrio washing machine. When the form is submitted, it states that the company will respond in three business days. Two weeks later, after no response, I submitted a second contact form. It has been five days, and I still have not received a response.

The Whirlpool I purchased has been the worst ever! Nothing comes clean even when I hand wash everything first and never has even from the beginning. I will never purchase a Whirlpool again. Now the machine wont drain I have gone through all the recommended steps for cleaning. The Whirlpool stove is almost as bad!

I purchased a Whirlpool Cabrio set about 5 1/2 years ago. Almost right away the washer made a horrible banging noise when In use... I had purchased a extended warranty so I had the service man out. He replaced something but the washer never acted right. I just about 2 months ago replaced it with a normal washer costing over half of what the Cabrio cost me... and now just a few days ago the dryer followed suit and died. The repair (out of warranty) was going to cost $150.00 and that was just for the part, I had service people out twice for the dryer since it came home with me also. This set was the biggest waste of money I have sadly wasted in my lifetime, is it just that they make things badly these days or the more crap that a machine has on it the crappier it is???

In January 2016 we ordered a Whirlpool Dishwasher through Home Depot. First, Whirlpool delivered the wrong dishwasher and the installer took my old one away - leaving minimal options to correct the problem quickly. Home Depot did not make the order Model # error but they did compensate for the error. Now, with 18 months of very low use (2 in household - prewashing all the dishes) the pump on the dishwasher is gone. Before posting this review I contacted Whirlpool via email. Two weeks later I had a phone message and I returned the call only to wait for 30 minutes to get through to a customer service agent who could offer absolutely no solutions or compensation for their poor quality product or service. There needs to be a zero on the scale of STARS to reflect Whirlpools overall quality.

A little over one year ago, I bought this model from Lowes. Shortly after installation, the ceramic coating on the floor of the bottom oven cracked and shattered. I contacted Lowes... No help whatsoever. I then fought with Whirlpool for weeks until they agreed to replace the unit. Seven months later, the floor of the bottom oven, once again, cracked and shattered. I am now in another dogfight with Whirlpool. This appliance is garbage and Whirlpool does not stand by their product. Do not buy any Double Ovens from Whirlpool. My next step is to organize a class action lawsuit.

This is the second time since I have had the fridge in September 2011. I had to have a new compressor installed about two months ago, and now, it is doing the same thing again. I had lost all my food before and its happening again. Last time, it took over three weeks before the fridge got fixed.

I purchased a Whirlpool top load 8500 washing machine from LOWEs two years ago. I noticed that the clothes were not getting wet, clean, were coming out covered in lint, soap film and stained. It is misleading to call it a HE washer since I have to wash each load 3 - 4.5 hours. It is NOT energy efficient if you have to wash each load of clothes 3 times with a rinse. I have tried all of the tricks - changing soaps, labeling the wash as bulky, wetting the clothes to add weight... Washing clothes should not be this complicated. The clothes are sorted appropriately and washed in the right temperature. I do not understand what is staining the clothes. I put new white towels in and they come out stained (see photo)? Lowes sent out a repairman who said the machine would never clean the clothes since there was not enough water in the washing machine to wash the clothes. I tried to return the washer to Lowes but they said it was past the 30 days. Unfortunately, I purchased the appliances on a Lowes credit card so there was no recourse. I then contacted Whirlpool and was put on hold and transferred to various people before I gave up.

Cabrio (h2low system) top load washer ..USA 120 volt - A true piece of crap... Bought 2010... Even when it does work, 5% of any load will NOT spin out... The damn thing will refill its tub with rinse water to redistribute load so as to get a spin out. SOMETIME month ago, thing just dies... nothing. Technician comes out for two hours its the shift sensor. Replace for 200+ bucks... done. Works for three weeks, dies, tech is back. 4 hrs... its a bad processor board. Ordered 140$ rebuild, comes in mail few days later. Tech is back, replaces board. We have smoke!! Looks like a bad motor part. I could go on... but why. Never ever buy one of these sorry pieces of dreck. Absolutely the worst. Poor quality even when it works. Horrible wash quality. Never again Cabrio. Remember it.

Why am I not surprised by this stupid American company? I purchased a brand new fridge in June this year and for the last 5 months I have had about 20 different technician visits by five different technicians who changed almost everything you could possibly imagine - evaporator, control, sensor, compressor, display, etc., etc. And the company still refused to take any responsibilities. They kept telling me that more inspection was needed EVEN AFTER all the technicians said there was NOTHING THEY COULD DO. After having to yell at them for about an hour, they finally realized they had to issue me a new fridge. What a piece of crap they are. Even then when I called back about the exchange, they pretended they could not find my file. WTF??? They really tried EVERYTHING they could not to issue an exchange. Wow. What an incredible company and its customer service. I will never, ever buy another American product - nothing complicated with computerized parts anyway. They are NOT capable of producing such complex machines. They should stick with toasters or juicers - lol. Stupid Americans. LG and Samsung all the way baby!!! ** you Whirlpool.

Hot water heater goes out. Try to relight it as instructed. Pilot light goes out as soon as I release pressure. Call tech support. After a 10min hold time, I was instructed to rest unit, wait 10 to 15 min and try again. Did not work. Called back and was told it was the thermopile. Had it shipped and replaced at $45.00. Still did not work. Was instructed to go thru the same process of lighting it, still did not work. Then I was given a ref# and was told that my PARTS was warranty and not labor. Okay now one time I was told I WILL BE CHARGED WITH A DIAGNOSTIC FEE OF $99.00 and still no hot water. Next step LAWYER.

Cabrio he washer wtw6400sw2 - I bought this washer about 6 years ago at the time we paid around $900. Now my bearings went bad and the repair person told me it would cost around $300 to $400 to replace the bearings and seal and shaft but that I should call Whirlpool and see if they could replace the part or give me some discount cause it is becoming an issue with all the Cabrio washers. So I called and spoke with a so called manager - as far as I know it could of been a cleaning person there. She told me that she could not do nothing about the issue. So if a lawyer would be nice to help me and the rest of the world that are having all these issues to file a suit against Whirlpool Corp.

GFG461LVT2 - In October of 2010 I purchased a Whirlpool Gold Fridge and Stove. Its been about 3.5 years and two of the caps that go on top of the range burners are chipped. All of the caps are badly stained and despite the manual instructions to wash them in mild soapy water, they do not come clean. They dont come clean using heavy duty Easy Off cleaner. In addition, the seal on the oven door has apparently failed because the glass is foggy on the inside. Today I phoned Whirlpool after going to their website. I first spoke to a parts representative who advised that I would have to pay $47.00 per cap or $115.00 for all five burner caps. I was transferred to another department as I thought I should get the appliance parts and door fixed for free. The appliance is only 3.5 years old. I was told that the appliance is only guaranteed for 1 year and I would have to pay dearly to remedy the two problems. This appliance is Whirlpools Gold series. It supposed to be top-of-the-line - the price tag was certainly top of the line. Im very disappointed in American workmanship and the companys lack of integrity. Not too long ago I purchased a Whirlpool (aka Maytag) front loading washer. I now own a Samsung. The point is that designed obsolescence will force consumers to purchase products made outside of the US because some of us cannot afford to buy or repair appliances, cars, etc., every couple of years.

I bought a Whirlpool fridge in 2014 and started having problems a year later. It was making really loud noises and the fridge part wasnt working. All the food was warm. Of course there is no warranty on it after one year. I called a repairman and he said that the doors dont seal properly so the warm air is getting in causing condensation which freezes the engine/fan which is the cause of the loud noise. The reason why the upper fridge is warm is because the fan pushes the cold air up from the freezer, which of course wasnt working. Then I noticed that the frame at the bottom of the fridge is bending causing the freezer not to seal properly which would be the reason for warm air getting inside the fridge.

I am writing due to the defects and flaws in my recently purchased appliances. I chose Whirlpool believing I was buying the highest quality for longevity purposes. Every appliance I own is Whirlpool or Maytag - same company. I purchased warranties and was told the warranties dont cover my issues and was basically brushed off. I am infuriated. Here is a list of complaints. Refrigerator is cracking on the inside on the inner door and at the bottom. These cracks surfaced within the first year of purchase. The warranty does not cover cracks in the inner body.The oven/range has an exhaust that bellows out of the top of the range in a way that the smoke curls up onto the panel and discolors it. I have never had an oven constructed with an exhaust pipe in the front that pours smoke onto the range itself and into your house. The dishwasher paint has rusted off on the door as have the screws on the inside of the door. The cover panel on the cleaning dispenser of the washer has popped off and cannot be popped back on, hence the guts of the dispenser are always visible and when I go to load the cleansers the front has to pulled out from inside the dispense.The refrigerator is also leaking from the bottom and the ice-maker no longer produces ice. This started off and on for the past 2 years. At first I thought the leak was from a near by window. No it is the refrigerator. All of these appliances were purchased in 2013, 14 and 15. New. I am 56. I have never had issues like this ever in my life growing up or as an adult. Appliances lasted forever. I am one person. How much damage could I do? None.These are flaws in chemical compounding of the paints and materials for cracks and rust. Whirlpool was called various times and was not interested in sending a rep to verify my claims. They said all of my warranties did not cover such issues only motors. Lots of many spent in vain. I will not purchase Whirlpool again as they seem disinterested in customer satisfaction.

We bought the Whirlpool Cabrio forcibly when our 20-year-old top load whirlpool finally gave out. The Cabrio sucks. It does not get anything clean, it ruins clothes due to low water which creates friction, clothes are left wrinkly, smelly, pilled with lint, stinky and unclean. Ive had it for a year and Ive given every cycle a chance. It simply does not do what it is supposed to.The HE washers are supposed to reduce water, but having to rewash everything several times with load times up to two hours not only increases the amount of water used but increases the amount of energy used. Our electric bill has gone up $30-55 a month on average. This doesnt even account for the fact that Im spending nearly 16 hours a week doing laundry for a household of five. Thats nearly triple the time I used to spend on laundry. From having to pretreat even the most minor stains to spending hours trying to get the wrinkles out, and having to remove pills of lint, to the fact that one wash cycle does not get the odors out nor the dirt out therefore multiple cycles are required. I honestly think I might spend less time if I hand wash everything, I certainly would get them clean and deodorized. UNFORTUNATELY Government regulations force the consumers to buy HE washers so our choices for clean deodorized clothes are non existent. If I had to do it again I would buy a used non-HE washer knowing it would run another 10 years and actually get my clothes clean.

My new Washing machine was to be energy efficient. Yes, It uses less water to wash a load of clothes. Problem is, it takes twice as long to wash a load of clothes as older models. If it uses twice as much electricity, In what universe can this be considered energy efficient?

Purchased the Whirlpool DU915 in 2004. Its been 16 years and I havent made a single repair. A lot of that is just proper use, i.e. scraping off food stuff, using correct soap, etc. I have other newer Whirlpool dishwashers at rental properties which have required repair due to misuse. I would recommend Whirlpool products to friends and family.

My refrigerator is about 7 years old. Has performed great. Good use of room inside. Easy to clean. Bought only Whirlpool products for years however since the last purchase of a range a couple years ago the quality was greatly diminished. May be changing brands now.

Ive had my Whirlpool Refrigerator for 2 years. Within that 2 year period, all 3 of the drawers within the refrigerator have broken and now there is a crack in the freezer on the bottom starting in the front and going straight back on the bottom to the back and up the back. After pleading my case for a new fridge to their Customer Satisfaction Department and everyones supervisor therein, theyve offered to pay for the epoxy repair. Im very dissatisfied with this! I dont think that a $1300 fridge should be held together by glue after only 2 years. Ive been waiting for one of the drawers to be replaced for over 2 months. They claim that the crisper pan is out-of-stock and they have no information if it is in production. Im to call back in 2 weeks to find out the status of that part. I would like to add that my husband and I work 6 days a week and our adult children are rarely here, so this refrigerator is very lightly used. We dont have a household of 6 or 7 people constantly home, opening the doors and sliding out the drawers. The fridge that I had previously was a GE and it lasted 30 years. I guess the next one will probably be a GE. I just wanted something different. Well I got it. Its something broken.