Whirlpool N50T61-403 - I bought this thing today 8.21.14 from Lowes. It is a Whirlpool 50-Gal water heater (6th sense) and was going to have it installed by their installer, but elected after seeing it was very similar to lining up with my old unit. I got it in and then filled it. After filling, I lit the pilot light per the instructions then turned the knob for heating it up. Success, the flame spread across the burners...then went out. The steady blink changed to the 2 blink code indicating a bad thermopile. It did not work - right out of the box. No plumber near me carries the part. Whirlpool has thus been pretty good about it offering to have someone come out at their cost... But if no one has the parts, that is no good. I am moving from this house so if we can get it to work, its the problem for the next owner. If not - Ill have to get an RMA and go back to Lowes... Then try the Rheem from Home Depot. Will see if they will overnight a part tomorrow. I found the other reviews - and I dont like it that this thing appears to have difficulty right out of the box.

I bought a NEW Whirlpool 40 gallon, natural gas hot water heater from Lowes in May 2012. January 04, 2014, the main electronics failed that controlled everything. It has a 9-year warranty (after 1 yr.- parts only). What failed was the Gas Control/thermostat unit, and it takes a HVAC-trained person to replace it. Yes, theyd send the part - free, but required me to pay for installation. Talking with an HVAC business owner, he said hes replaced about 30 of these and he surmised that Whirlpool KNOWS that nationwide, over 10,000 needed replacement yet Whirlpool cares less. Ive had trouble with other Whirlpool products, so when my appliances, etc. go bad, I will NOT replace with Whirlpool products.

Absolutely the worst hot water heater I have ever owned. Broke within first year which Whirlpool sent me a replacement valve assy which I had to install myself. That one failed in 3 month and unit was out of warranty so I received no help from Whirlpool. Had a serviceman fix it again and it failed again. So I ended trashing the unit. I would not buy another Whirlpool product as long as I live. The last 5 appliances I purchased from Whirlpool all failed within a few months after warranty expired. This is no joke. Everything they sell is farmed out to other countries than the US and the workmanship and quality is the worst I have ever seen. The service people are nice when they tell you that they cant help you with your problem. Dont waste another dime on Whirlpool! Very bad product.

We bought a fridge in November 2013. Brand new, paid about $2400. After a few months, the fridge wasnt keeping our food cold, was leaking from the ice maker, and wasnt making ice. I called for a repair and about a week later they sent someone out. He assessed it, then came back a week after that to replace the part. Within a month or two later, the same problem. I called for service and was set up with a new company. The repairman called me a couple days later and instead of setting up a time to come in, he says its a common problem, he knows whats wrong, and he will order the part and call me next week to come replace it. A week passed, no word. I tried calling the man back, left several voicemails, and no answer. After another week, I call whirlpool again and tell them I heard nothing from the man and at first they tell me they cant do anything with it since it is an open ticket and I tell them thats not okay. They need to close it, he never even came to the house and assign it to someone else. After they tried multiple times to call the repair company themselves with no answer, they assigned it to a new repair company. Again, it was assessed, a part was ordered and replaced another week later. So now its been well into 9 months of having a worthless fridge. A few weeks after that part was replaced, the problem was back and I called again for repair. I was told if this problem is not solved this time I would be eligible for a replacement fridge. Obviously, it did not work so I called to have a replacement fridge at the end of August. I was told that someone would call me to set it up in 5-7 business days but maybe a little longer since Labor day was right around the corner. I waited, patiently. I called every few days for weeks until mid October and kept getting told it had not been assigned, they are really backed up, it will be just a little bit longer and they will send a message. Mid October, my sister in law called for me and she was told that it was denied because I had not had it serviced within the last 4 weeks. WHAT KIND OF ANSWER IS THAT??? Thats like putting salt on a wound!! I have had spoiled food, constant clean up of leaks, and constant wasted calls to get told that it was denied because it wasnt serviced in the last 30 days while I was waiting for a response from Whirlpool??? So of course I grab the phone and go off. They agree to reopen the case because it was denied for a bad reason. At this point, as I type this, I have been on hold for 55 minutes to speak to yet another supervisor because it has been 2 and a half weeks since they reopened my case and I am told it has not been assigned and the best they can do is send another message.

Our first Whirlpool washer barely lasted 1 1/2 years. They replaced it with another one that broke within 9 months. When it worked, it was great... When it didnt, it either overflowed or did not wring clothes tightly on the second rinse.

In the first year of my Whirlpool Washing Machine, the motor quit working entirely. Fortunately, the machine was under a 1-year warranty and the motor was replaced by a Whirlpool service technician. My big complaint with this washing machine is this: Even though you select hot water for the wash cycle, the machine has sensors in it that only allow the water to get lukewarm. If it senses the water getting too hot, it adds cold water to bring the wash temperature back down to 78 degrees F. Next time I will do my research and buy a machine that actually allows one to use hot water.

Recently, I was having a problem with my Whirlpool gas range so I contacted the 1-800 number. Long story short, the repair cost was so high I would be better off getting a new range. But believe me, it will not be a Whirlpool.

At least three times a week the washing machine does not wring the water out of the clothes. The best Maytag wants to offer is to extend the warranty for one year. So washers are supposed to last for 2 years? Will never purchase a Maytag again!!!

I bought a Whirlpool Cabrio a few months ago. Every time we do a load of laundry, the clothes are not getting cleaned. Dark colored clothing, including grey clothing, comes out of the washer with white residue, streaked all over the clothes. We have to rub the residue into the clothes to make it go away. If we attempt to dry it and do not get the residue scrubbed off the fabric, when the clothes get dried, there are white streaks in the clothes. This is extremely frustrating. We spend a lot of time getting the residue rubbed into the fabric every time we do a load of laundry.The local appliance store has told us that perhaps we are using too much soap. We have used nothing but the high efficiency soap, as recommended by Whirlpool, and have reduced the amount of soap per their suggestion. It is now to the point where we are using hardly any soap at all, in the hopes that we would not have to spend 30 minutes working on the clothes after every load. That has not worked. The white residue is still all over the clothes, and since we are using less soap, I dont think our clothes are actually getting cleaned.When we wash a load of whites, they arent getting cleaned at all, even when we use bleach. In fact, when I compare brand new undergarments with recently bought undergarments that have been washed a few times, the ones that have been washed a few times are noticeably different in color, they are actually starting to turn grey in color.I have used Affresh in the washing machine, per the manufacturers suggestion, numerous times. We had thought maybe that was the problem. But even the load right after the Affresh treatment leaves the white residue or does not get the clothes cleaned.This washing machine was close to $700.00, and I feel that for that amount of money, I should be able to expect clean clothes. I have never had a problem with a Whirlpool product before, so I had no qualms about purchasing this washing machine. At first, I thought maybe it just needed to get broken in, that it would stop leaving the residue after it had been used a few times. However, that has not been the case. I have tried everything I can think of to improve the performance of this washing machine, but nothing helps.When I contacted the local appliance store to complain, they suggested I cut back on the soap. I told them that I had tried that and it didnt work. They told me to use Affresh, I told them I did that. I asked them if they would take the washing machine back; let me trade it in for something else. I would even be willing to get a cheaper washing machine, I just wanted something that worked. They told me they couldnt do that. Even though I was still under warranty, unless it was broke, they couldnt do anything, and even then, all they could do would be to try to fix it. They couldnt take it back and give me a different washing machine.The experience I have had with this washing machine is the worst experience I have ever had with an appliance. I had always thought of Whirlpool as a trusted brand for appliances, but if this washing machine is any indication of how they now makes appliances, I will never buy another one of their shoddy products again; and you can guarantee I will be telling my friends, family, and coworkers not to buy Whirlpool products either.

I bought a Whirlpool Cabrio Platinum washer 2 years ago and it is by far the worst washer I have ever owned. Its a water saving device with extremely long cycles. The clothes dont get wet enough, dont come out clean and they do not smell fresh. I have to put them through 3 rinse cycles and often times have to re-wash my clothing. The cycles are very long, using more electricity, and it takes me 3 times as long to get my weekly laundry done. My clothing comes out more wrinkled and twisted causing longer time ironing. My old agitator style washer did a superior job compared to this piece of junk. I dont like the automatic locking lid, nor do I like the machine choosing the spin cycle for me. There isnt even a soak cycle. If I want to soak my things I have to do it in the sink and then drag them to the washer to rinse and spin them.I spend a fortune on laundry additives in order to get my clothing clean and then they arent as clean as with my old washer. I now dread doing laundry and every time I look at the washer I feel like taking it to the dump! There isnt anything I like about this machine and I wouldnt recommend it to anyone. It is a piece of crap. This is 2016 and they havent learned how to make a good working washing machine. When I move, I will be celebrating leaving it here! I will never, ever buy a product made by them again.

We have purchased 4 refrigerators in the past 20 years. The first three were not Whirlpool and were a constant issue for us. Once we purchased the Whirlpool, we no longer had issues. We have the side by side with a freezer at the bottom. This model has performed exceptionally well for us and hasnt presented any issues for us. I would highly recommend it to family and friends, thus the rating of a five.

I purchased a new Whirlpool 29 cubic ft. french door bottom freezer Refrigerator 11-22-2013. On 4-18-2014, I noticed water on the floor and realized my ice maker had quit working and the ice melted. I called Stantons APL. where I purchased it from and a service tech came on 4-22-2014. He checked the fridge out and after five mins said this is a model that has a known defect in it and it would have to be totally rebuilt. I then called Whirlpool and told them I want a new Refrigerator. I told them I paid for a new appliance, not a rebuilt one. The Whirlpool rep said they would need a second opinion and scheduled a different company to come out for service. This happened on 4-25-2014 which by this time I lost all my food in ref and freezer. He was there about ten mins. and said its gone out and it will have to be totally rebuilt. He calls Whirlpool tech support to help him figure out how to take out bottom door because he didnt know how. WHIRLPOOL tells the tech they want him to tear my refrigerator apart and run diag. test on it to see how it performs under certain codes. I tell Whirlpool they can run all the test they want after they replace my refrigerator and my food. The Whirlpool rep says, That aint happening. So I say, Then I need to talk to your supervisor. After going through four supervisors, I finally get to the person who reluctantly agrees to replace the refrigerator and says give her 24 to 48 hours to make it happen. 60 hours, still waiting on a response. Will let you know what happens. Shame on you Whirlpool for deceiving the public.

I feel as though they could use some additional features, it’s also hard to change out some of the wiring in the back. I’ve had some issues with smells coming from the washers as well from them. Hopefully they can start to look into tweaking smaller details to improve the overall machine.

Im very frustrated. I bought a Whirlpool Refrigerator for nearly $1300 in Sept. 11. It is a side-by-side Model #ED5KVEXVL00. The refrigerator side started warming up to the point that we noticed. We put a thermometer inside to confirm; it went up to nearly 60 degrees. We tried cleaning any dust underneath from the coils and even unplugged it for a while. The compressor appears to be the potential problem. Sears is not sending a repair guy for 2 WEEKS (It is a hot July here in NY)!!!!We are saddened that Whirlpool says it is out of the one-year warranty - so now we are facing the choice of a large repair bill or buying a new refrigerator. What a waste of money... Its not even 2 years and it needs service or a dumpster. Shame on Whirlpool for not standing up for customers when clearly there is something wrong with this machine so close to the warranty and so new. Sears and Whirlpool - youve lost me as a future appliance customer!!! :(

I purchased this washer 3 years ago. At year 2, I had to replace the RPS part. The codes that appear represent 2 different issues as well: one being the RPS part and also for the control panel. In less than 1 year since this replacement, it is broken again! The clothes do not get very clean. You cant soak whites in hot water and bleach (it drains after 5 minutes if you stop it). You have to use the bulky setting to get enough water to actually wash your clothes. If you get too much detergent, your clothes comes out crunchy feeling even with the extra rinse.I thought this Whirlpool product would be great since my 22 year old dishwasher is a Whirlpool and still works but as the old saying goes... They dont make them to last like they used to. To say this washer is a POS Lemon is an understatement! I also have the companion dryer and it is starting to have problems including the door latch breaking into pieces. I will never purchase another Whirlpool product again! I have been told that Kenmore and Maytag are also under the Whirlpool umbrella so Im not sure what I will buy next. My recommendation: DO NOT BUY THESE PRODUCTS!!!

I bought three Whirlpool appliances (fridge, gas dryer and washing machine) from Abt in June 2012, delivered in July 2012. The fridge has not cooled from the moment we plugged it in and because I am out of state from Abt (IL), I have to deal directly with Whirlpool. According to both the Whirlpool customer service rep and her supervisor, if a product is defective from the start, Whirlpools policy is to try and repair it until they determine it to be scrap and only then will they replace/refund. I find this policy appalling since I paid for a good working product, from a company Consumer Reports rates very highly, but was shipped a defective one. Now, I have had two service visits, the second because according to Whirlpool the first technician did not perform the correct service. I have been told not to put anything valuable into my freezer for 5-7 days because most likely I have a coolant leak and the fridge is bad. This is terrible customer service and instead of fixing their error which is the purpose of having customer service, they are quickly building a reputation for a terrible product and terrible service. Good customer service would be replacing the defective fridge as it is clearly their manufacturing issue, taking the item back to their warehouse, repairing it if possible and selling it as reconditioned for a discount. I am noting my suggestion in case any Whirlpool representatives read this website. Another interesting item to note is the gas dryers absorb air from the environment around them so if you do any painting (full room or touch ups), the clothes that come out of the dryer may have a burnt/gas smell for up to 7 days. I am still waiting to hear back from the Whirlpool technician as to my burnt smell problem/resolution, but was told this from a separate service representative so I thought I would pass it on.

Changing the filter is difficult & expensive. And where has the old fashioned service gone. New refrigerator and would have to pay for service. This happened when I bought the refrigerator a couple years ago. I do not think this should be the standard for a new refrigerator.

Product: Whirlpool Gold Series, Model WRX988SIBM01: Purchased 2014 at Lowes. 2nd day after delivery, called Whirlpool, refrigerator not working properly, freezer drawer will not close, condensation on outside. Sent person that delivered the refrigerator to fix problem, freezer had frozen ice behind each drawer approximately 2 inches that would not allow drawers to close. Delivery person used hair dryer to melt ice and adjusted drawers. Still periodically have to physically remove ice build up to allow drawers in freezer to seal properly. Ice maker stopped working, makes no ice at all, ice comes from inside refrigerator not from freezer, bad design.Today woke up to freezer drawers completely thawed and had to throw away all food, panel shows temperature at -2*. All food thawed and unable to be cooked/used. Called Whirlpool could not send someone until next Tuesday (4 days). We are a family of 5 and cannot wait that long. Unfortunately have called 3 other appliance companies only to find that refrigerator has to be repaired by special technicians! This is our first Whirlpool, bought because made in America, have been very disappointed with our $2500.00 purchase. Not sure that we will ever purchase another Whirlpool product, our inclination will be to buy less expensive product and choose to replace as opposed to paying recurring service calls + parts and labor.

I purchased a Whirlpool gas hot water heater in July 2012 and have had to replace the control/pilot light mechanism every 6 months since then. Whirlpools customer service is the worst service in the world. They are rude. I have followed their instructions every time and have been accused of being uncooperative. I paid $350 to $400 for my heater and just spent $200.00 to have a plumber put apple cider vinegar in my tank.I was told by Whirlpool that the calcium sediment was causing the problem... I drained this tank twice and there was no sediment in the tank. This is evidently a common error for Whirlpool tanks. I will never purchase any Whirlpool product again and will tell others that their products are crap. The worst part was the inconsiderate customer service. I dont know who trains them, but they need to fire the entire bunch. Shame on you Whirlpool!

Whirlpool top loading piece of junk! I would give it a zero star review if I could! Do not buy this machine!!! I agree with many other reviews. It doesn’t get the clothes cleaned and now a completely doesn’t work. We reset it, we’ve had the service guy come in and replace a bunch of parts on it. It’s past its one year warranty and doesn’t work anymore. Piece of junk! Junk, junk, junk!!! Waste of money. Do you not buy the Whirlpool tub loading washing machine!

I bought this Whirlpool Duet Sport washer and dryer, and I have had to constantly bleach out because our laundry smells like mold. I found out that Tide sells a special cleanser for this washer so I have been using that for the past two years. It did not really help. Well, today I accidentally put laundry soap in the wrong dispenser, so I took the dispenser out and was horrified to find mold that was all in the back where the fluid is dispensed, I mean way back in there. I have been suffering with sinus problems, and swelling in my eyes and face. I even went to the doctor, but no one has figured out why. I now know it is the mold from my washer making me sick. Well, my son and daughter-in-law were staying with me, and commented on how bad it was when they used my towels. I am stuck with a $1,600 washer and dryer that is making my family sick.

We have had this Refrigerator for 3 years in December of 2016. To date, we have had to call a repairman (in February 2016) to replace a circuit board on the back of the refrigerator. That took 4 days, as the company sent the repairman the wrong parts. After that $300 repair, which we got at a discount because, the repairman felt bad that the company actually sent the wrong part. Since then we have taken it apart ourselves for several reasons: The freezer compartment filled up with a layer of ice and started to melt all over the floor, shutting the refrigerator off, (which then forced us to borrow coolers to store the food) until it could be repaired. The drain tube was completely blocked and in order to fix this problem, the tube had to be taken out and modified, according to the Internet videos we then watched. In order to make all of these repairs, the door, the shelves and baskets have to be removed, which is definitely not an easy thing to do at all.There are so many hidden screws and tabs that must be manipulated with tools and by hand to remove the doors, shelves and trays just to get where you need to be in order to make these repairs. With each repair, the ice maker and water dispenser started having problems, because, each time the refrigerator has to be shut down, it takes hours for it to re-set itself. Luckily my husband had the tools necessary, with videos on the Internet to assist us. However, once the first problem started, it was a snowball effect, literally. ALL of these problems have been identified by the manufacturer, however, nothing has been done. VERY POOR DESIGN!

My ref. stopped working. I troubleshoot it and did not work. I filled out a service request back on February 2nd, 2015. I got an email back from a subcontractor called Active Appliance INC. with a date service on February 6th, 2015, 4 days after my service request, and that is the only available date. The technician arrived while I am not at the house, however I talked to him before he started the work on my refrigerator and asked him kindly if he can call me after founding the issue, and he assured me that he will. No call and when I arrived home I found that he told the attendant that the refrigerator is not working and he has to report to the office. REALLY! We know that! Anyway I called Active Appliance and the customer services rep. told me that she could not answer with the diagnose until she speak with the technician and that will be Monday February 9th, I asked if I could speak with a manager, and her reply was Our managers do not talk to the customers. I had to hang up and call Whirlpool customer services and spoke with a nice gentleman, that he was not happy with Active Appliance INC. services. He placed me on hold and called them and within 3 minute he got back with the news, what was wrong with the refrigerator, electric computer panel burned out and then the fan continue to work with no stop, so it burned as well. He assured me that the services will be done no later than Tuesday February, 10th.While on the phone I got a call from active appliance and this time she wanted to know if I am warranted. I told her that I have Whirlpool on the other line and they assured me that I am. She said that it does not matter and she has to get something in writing. I placed her on hold and talked with Whirlpool and he assured me that he will contact them and email me a confirmation, which he did. By Tuesday February 10th, no call no follow up. I called Active appliance and they stated that it would take up to 14 working days for a part to arrive. I called Whirlpool and spoke with a customer services manager, and she got on the phone and told me that they are going to do their best and get back with me. Today February 16th I got a call to cancel a work service order due to technician calling sick and reschedule for February 25th Wednesday, I told her that they did not call to schedule the service first place, her answer was Never mind, I am calling to cancel anyway. Would you like to take this appointment or NOT? I asked her kindly to reevaluate their service procedures and the way they handle their customer, and I told her that I bought my refrigerator from Whirlpool and they are the company in charge of their product and I do not wish to continue this dialog with Active Appliance!I called Whirlpool and the customer service gentleman was helping me and we got disconnected, however when I called back they were closed for the day, however the customer service has my phone number but I got no phone call!!!! I think this is the worst POOR service I got within the last 20 years!!!!! I hope someone at Whirlpool care about their services and can contact me to handle the issue.

My water heater burner went out after just over 3 years caused the pilot to go out. I was worried that although all parts were covered for 12 years and labor for only 3 and the labor would be very expensive. When I called and told them about the problem they said the part was covered and would ship it next day air but 10 minutes later another rep called and said they would cover the labor as well and to check a nearby service company as they might have the part in stock. Long story short without having to scream and yell my problem was corrected within 8 hours and all I have to do is drop off the new burner at the service company when it arrives. I have been lucky and haven't had many warranty problems in my life but none that I have had have been resolved so painlessly. I will never buy anything but Whirlpool from this day forward. Thank you Whirlpool.

Very unhappy with my top load washing machine. I use more water. Can wash fewer clothes and clothes do not come as clean as with my older Whirlpool. This machine needs a SERIOUS AGITATOR. Will not buy another Whirlpool.

This product deserves ZERO stars! I purchased a Cabrio washer - dryer in October, 2013. I have carefully followed the instructions for the washer. I am hugely distressed about the large amount of money I spent on a washer that is absolutely terrible, horrible, awful., no words can adequately express how bad this so-called washer is. The low-water washing has torn up all of my new towels in the matter of a couple of washes. It has completely ripped out the hems of the towels and pulled long ragged strings in the towel. And these were not cheap towels. I am mad at myself for not researching better before buying. I hope my complaint can save another consumer from the misery I am suffering because of this shameful product.

I purchased my new Whirlpool Cabrio Top Load washer to replace a Maytag that had finally given out in the summer of 2012. I wish I did more due diligence, but with a toddler and a newborn, I needed a washer asap. I severely regret my $800 purchase from Sears. It is now February 2013 and the machine basically only runs on two cycles - Casual and Normal. All the others stop in mid-cycle. Sometimes, the items are still dry or partially wet so I need to switch to another cycle to complete the wash. This is not good for Delicates or when I wash Whites, Heavy Duty or Bulky items which is one of the reasons I purchased the model. The cycle stops when the items are soaked with massive amounts of water. So I then have to turn it to the Drain cycle and start over. After a day of washing one load, I couldve done it the old-fashioned way in my utility basin sink and hung it out to dry ... I dont have the time for this. I am going to make a formal complaint to Whirlpool and to Sears. I cannot keep spending nearly $1,000 for items that break within a year. These companies should be ashamed of their lack of quality. I shouldve gone with the Electrolux and just dealt with the price tag - I wouldve been much happier.

I agree with the person who said they would rate it no stars, because this washing machine model (Whirlpool Cabrio Model No. WTW8500DC4) does not deserve one. It truly does need to go back to the engineering department. This washing machine is a replacement for another Cabrio! Short story on the first one: Installed on February 2, 2017. October 5, 2017, machine would not go. Then began a series of waiting for repair people, parts, etc. I think it was a total of four trips -- the first one to inspect, three to install parts, the last one being where the repairman took the machine totally apart in the laundry room and was here for several hours. Still would not work. On November 29, 2017 (almost two months later!), Whirlpool had one delivered by JB Hunt. Well, that wasnt so short.This complaint is on the replacement machine. Installed on November 29, 2017. On February 3, 2017, washer said it was done. Well, it wasnt! Clothes were sopping wet, had not been spun, and the fabric softener had not released meaning, I guess, that they had not been through the rinse cycle. It gets better! Tried to start it on a short wash, meaning not very dirty as that is the only way to shorten the cycle. The timer showed 40-something minutes, then went to 1:36 minutes, then to 1:42. Turned it off, unplugged, let sit 15-20 minutes. Plugged in, started it back up. It went crazy! Water was pouring in the machine, then I heard a noise, looked to see what it was -- it was water coming out the bottom of the machine. Husband turned off the water spigots, didnt stop the water. I unplugged the thing from the wall; water did stop.Water was in the laundry room, the pantry, the kitchen! Thankfully I was standing there to see what it was doing or it could have been really bad. This time I took photos and video of this thing. Technician is coming Wednesday. Well see, wont we? Do not want another Cabrio, but what do you do if, like most people with new washer/dryers, you want a matched set?

Cabrio Whirlpool washer - I hate this washer. Had it for about 3 years now and it will not spin out and does not give a code. Called a service tech out and they cannot find anything wrong with it. The water goes out but will not spin. It sits on 20 minutes and does nothing. Will not buy another Whirlpool washer. Wanted a good washer and got a piece of junk. Will not recommend it to anyone else. Think Im going back to the old style.

WHIRLPOOL REFRIGERATOR MODEL WRF532SMBM01 FRENCH DOOR - Gasket in refrigerator door totally cracked in bottom part and torn on the side only after 2 years and one month of use. I have another Whirlpool refrigerator for 7 years without gasket failure. My other 3 previous refrigerators which I have owned more than 10 years. Each also never had any problems.

Kitchen Aid is Whirlpool - Buyer Beware. 1.5 year old dishwasher Model #KUDS35FXSS8 lost power, repairman came and confirmed it to be the panel control and the part is back ordered 4 weeks out. Expected to come day before Thanksgiving, repairman cannot schedule until part arrives thus no guarantee date of fix. Found part online from AppliancePartsPro.com. They shipped it one day later - fixed dishwasher. Whirlpool will not stand behind part because it did not come from them. I have all the proof that it is a Whirlpool Certified Part from a Appliance Parts Pro. Appears Whirlpool would rather have a broken machine in a home rather than help the customer fix it.

I have had almost all the same issues everyone else who reviews the Cabrio WTW7800XWO washer. Now, the spring loaded lid wont stay up, so we have to use the Downy bottle to load the clothes. Thankfully, I have not had the lid crack... yet. We have had it serviced once while under warranty, that tech told us it wasnt good to wash small items, like socks. Are you kidding me? Now, the heavy lid falls on you while you are loading. I also have the Cabrio dryer, and we have fixed that more than the washer. DO NOT BUY A WHIRLPOOL CABRIO. We bought it because it was the largest unit in the store, but it is junk.

I purchased this machine, a Whirlpool Cabrio WTW5640XW, from Lowes on Dec. 11, 2010. I just realized today, Dec. 24 2012, I had a 2-year extended warranty plan! Shame on me. At any rate the washing machine is very hard on clothing, tearing light fabrics and ruining my wifes bras. The clothes often come out with shreds of fabric from the other clothes in the washer. Oftentimes, it will not complete a cycle because it constantly goes out of balance. Today I paused the machine halfway through the wash cycle after the soak cycle to throw in some more laundry and start the cycle over. Half the clothes were still dry! Yes it may save water, but if you only use a cup of water for a load of clothes, how well can it clean? My wife has sensitive skin. So now we wash a load with extra rinse and normal soap then run the cycle again with no soap to get the soap residue rinsed out. Were saving big now! Yes, we are using HE detergent and the recommended amount. The machine is pure junk. I would love to see a class action suit against Whirlpool for selling such an inferior product. I know thats asking a lot in the land of no accountability we live in today, but one can always dream.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I contacted Whirlpool on 3 separate occasions. Each time they told me to have the plumber call them so that they could determine what the problem was. Each time he was able to get the water heater going again, but it would only operate for about 3 months and then it would go out again. To date, I have incurred $245.00 in plumbers service fees. My last call to Whirlpool was on 5/14/2013. This water heater was purchased on 1/25/2010 at Lowes in Evans, GA. It went out over the weekend, but the plumber was able to relight it. When I called Whirlpool on the 14th of May, I was told since it was working now, there was nothing they could do. I am tired of dealing with this issue. They wont stand behind their product.

Bought a Whirlpool Cabrio washer and dryer 5 years ago and with only 2 adults and 4 washes per week, it broke down twice needing new motherboards each time and, of course, Whirlpool would not take any responsibility as the 1 year warranty had past! I will not buy another Whirlpool!

WTW6340WW0 - When washing clothes, on the last spin it stops and gives an UL error message. I make sure all the clothes are level and restart at that point but still the UL error message appears and water starts leaking from the underneath of the machine. Weve reset the and unplug the machine but no difference. Please help on what else to do.

On April 10, I bought a Whirlpool washing machine with a sensor. My clothes do not come clean. The dirty spots are still visible. I had three technicians come to check it out and after they just made the machine start, make the water run, and make the water empty, they confirmed that it was working normally. I have insisted on having someone come and just do a small wash and they did not agree because they are not there to wash clothes. I went back to Leon’s where I bought it and the saleslady told me that she could not do anything about it. I have been dealing with the customer service and the person has tried three times to get someone to come and check the washer properly and was insisting in front of me that I wasnt at all satisfied with the performance of the washer and still confirmed that the washer was working fine. They keep saying that there are no parts that need to be fixed or exchanged, so that means there is nothing wrong with the washer. I have tried all different kind of soaps. They were suggesting that I use Tide, which was the best performing soap. I used Tide or Purex - I even tried half a bottle of bleach - and it would not clean my clothes. The problem is the clothes are not turning, they just hardly moved with water that just keeps the clothes humid. I tried putting in more water with a bucket and when I push the start button, it would drain out all the water that it did not put itself. Ive called the consumer protection and they have advised me to take legal actions against the company and the store that sold it to me. They confirmed that whatever we buy, the article has to do the work it was made for; so the performance of a washing machine is to wash clothes. I even took a three-year prolonged warranty and the store told me that once the one-year warranty with the company has expired, then they could help me with sending their technicians and see what the problem was and they would take it from there. I have an account with the store and I have eighteen months to pay it off. So I was wondering if the saleslady did sell me an appliance saying that it was very good and that I should not have any problems with it. Can I take steps going against her for false advertisement? It’s a month now that my clothes are not washed properly and I need to rewash them by hand before putting them out to dry. The consumer protection office has been telling me that the store should be the one to finalize the problem with the company, but it seems that not even they can come to an agreement. Whatever steps I will take against the company and the store, what are my chances of getting my washer replaced? Whirlpool has been advised about me taking them to court and I got permission to do so. Actually, they invited me to go ahead and do what I thought was right. I do not have the money or time to waste on something that maybe I will have no chance to get anywhere. All I want is to have it replaced with another washer that would be more performing. If anyone has had the same problem and had their case solved, maybe it will give me hope to go on. Please, what is the best and fastest way for me to get this problem resolved? I do need a washing machine. I do need to wear clean clothes. Thank you for your patience and understanding.

Am posting in regards to a brand new dishwasher that I purchased the first part of February 2020 from Menards. The dishwasher I bought is Model # WDT730PAHB and Serial # F94519386. I had the dishwasher 10 days and it stopped working after running only two times. I checked the breaker box and all electrical connections to the machine and it was getting electricity, but would not turn on at all. I called the store to return it and they only have a 7 day return policy. Since then Whirlpool has been contacted and I have had two service calls from Whirlpool. The mother board has been replaced (which I waited two weeks for the part & five hours for a service man) and still it will not come on. Now I am waiting on a wire harness, ordered on March 4th or 5th and still not here. I completely understand wanting to fix a broken machine, however this was a new dishwasher that only worked for 2 washes. I have now been without a dishwasher for almost 2 months, which in light if our current world situation isnt a huge deal, however this is a time when sanitation is very important. I feel like Whirlpool should offer to replace my new machine with a new machine and not something that is refurbished. At this point it is costing more to repair this machine than to just replace it. Every time I call Whirlpool I get the line of we have to repair it. Give me a break. Take care of your customers!!?? #neverbuyawhirpoolproduct

AquaLift Self-cleaning does not do the job as advertised. It does very little to clean the oven. Sitting-on-the-floor-in-front-of-the-oven scrubbing is what is needed to clean the oven.

I have the same problems as the ones listed in complaint section. I bought 4 Whirlpool products at the same time: refrigerator, stove, and the Whirlpool duet. Washer is a front loader. We have had nothing but trouble. The company we bought the machine from exchanged the washer for the same model because the electrical was bad and the parts to replace were back ordered for more than 3 months. We are now having problems with the exchange washer. This time it is the same as the engineer remarked in his complaint the bearings are bad and it sounds like a jet taking off. It’s that loud.I went down to the place of purchase and I am in the process for the repair. I have a feeling this will not end well. Whirlpool, if you call them, gives you a run around or tells you they dont have you listed in there computer. We dont have the money to replace any of this. This new machine is only 9 months old. Whirlpool is making a killing off of fixed income people and the working class. You tell me who can afford the cost of that kind of repair or the cost of a new machine that only works for a couple of months. Why is 60 Minutes not on them like a bad smell?

I work on Whirlpool refrigerators for a living every single day of my agonizing, miserable, lousy life. Ive never seen such a mass of dysfunctional, defective rejects as I have with the new Whirlpool side-by-side refrigerators. The ice maker never works because the water line always freezes in the door. The food in your refrigerator side will either spoil or freeze because the damper door will stick open or freeze shut. The water filter housing will start leaking before you change the filter for the first time because of the inferior quality of the plastic its made from. And of course my all time favorite the compressor will always go out under the first 5 years (Thats why Whirlpool changed the warranty from 5 years to 1 on the sealed system). Ive never been a big extended warranty believer. But, like old saying goes, They just dont make them like they use to. Definitely applies to Whirlpool refrigerators.

I bought a Whirlpool washer and after a few months it started acting up when spinning. I contacted your so called customer service and they gave me the runaround. Told me I wasnt loading it right. Im 60, I know how to load a washer. Well it got worse and worse and finally went kaput. Its going to cost over $100 to fix the springs and I was told it was your lemon and all that brand was bad. I will never buy another Whirlpool product because you wont stand behind them....

I purchased my Whirlpool washer and dryer Cabrio Platinum model in September of 2014 from Lowes and have never been so disappointed in a washer in my life. Not only was it the most expensive washer and dryer set I have ever purchased but it is the absolute worst in performance. It has destroyed most of my clothes and linens, doesnt get them as clean as my former Samsung front-loader, and is constantly twisting up the clothes, getting out of balance and requiring me to adjust the clothes once or twice during each wash cycle. On recent research, I have found that I am not the only one experiencing these problems. Whirlpool should RECALL this series entirely! And I intend to post this review every place I can to prevent future sales of this horrible product.

As a consumer, Im very disappointed in this Whirlpool Cabrio Platinum washer. It does NOT clean your clothes. Many times Im washing my clothes twice, only loading a 1/3 of a load of laundry in it because of this problem. No matter what you do, it just doesnt clean your clothes. Has anyone considered putting a law-suit against the company. They will NOT stand behind this issue, NOR replace your washer with something that works. Maybe that is what it will take. DO NOT ever ever ever ever ever ever buy this piece of crap washing machine. You will waste your money, your time, your extra detergent it takes to wash your clothes AND the cost of the machine too! The MILDEW SMELL is horrible and no matter what you do you CANT GET IT OUT! Ive tried it all. Im just angry because I had to save money to purchase this set and it is a piece of crap! The customer service is just a runaround, they wont help you! They will just give excuse after excuse. They need to replace EVERY ONE of our washers with something that works!!! For the cost of this machine alone, they should do something to resolve this issue!

My fridge stainless steel doors rusted on after Whirlpool Customer Service told me to buy and use Affresh (a Whirlpool product) to clean them! The fridge was only 12 days old when this occurred, imagine my shock and disappointment. Whirlpool Customer Service reps then sent me another one of their products Whirlpool Stainless Steel Brightener with instructions to clean it every day for 3 weeks and it would resolve the rust problem. It didnt resolve the rust problem. 2 repairmen from different companies have looked at the doors and shook their heads that Whirlpools own Customer Service department recommended a product for a fridge that rusted it and then they take no responsibility for it! Whirlpool knows these stainless steel fridges have the potential to rust. Its listed in their manual. Unfortunately, buyers arent given a copy of that manual to peruse BEFORE they buy the product. I would never have purchased this Whirlpool fridge had I seen that! I have now since read of other Whirlpool stainless steel fridges rusting.

Stainless steel rusted in under six months - Purchased all new Whirlpool kitchen appliances in March 2013. In July 2013 finish on both refrigerator doors and freezer door was covered with tiny rust spots. The finish was obviously defective. Contacted Whirlpool, sent photos and was told the damage was cosmetic and not covered by warranty since it didnt happen within 90 days of purchase. Ice make did not work right from day one. Finally paid to replace it myself and repairman said Whirlpool discontinued the style of ice maker I had because they had so many complaints.

I have many rentals, and for over 39 years have always bought Whirlpool dishwashers for them and my own home. I have noticed over the last 15 years or so they are getting more and more poorly made. First I quit buying the plastic tub ones because they collected mold on the back. Then putting one in a rental, we went through 3 brand new ones that all leaked before we got a good one. Now, I bought the very best for my home 2 years ago, had the pump replaced under warranty due to leaks. Now, the plastic upper rack wheel has snapped off its plastic base. For under 30 dollars you get a replacement kit for it, that is all metal. So why didnt Whirlpool just put in the metal ones and charge a little more. So this will be my last Whirlpool, and all the brands they make. Do your research, many of the name brands you know are all made by Whirlpool.

I’m a 69 year old married man who has probably owned about 8-10 clothes washers during my life. I purchased my first Whirlpool washer about 1 1/2 years ago (Cabrio - model WTW8500DC2). It began leaving sediment on my clothes immediately, even though I followed the specific washing instructions. Whirlpool sent 3 different repairmen to fix the problem, each indicated there had been problems with this machine. None were able to fix the problem. When I called Customer Service for the 4th time, they refused to discuss the problem. They said there was nothing wrong with the machine, it was my problem, I must have too much “lint” in my clothes. Haven’t had that problem for 69 years, but this was their way of handling the problem. They refused any further help. I would discourage everyone from buying a Whirlpool product. I absolutely do not back their products. You are on your own!!

This Whirlpool is great with a side by side refrigerator and freezer. I love the ice maker and water on the freezer side door. The refrigerator keeps my veggies and fruit fresh and crisp. Has a water filter purification that makes the water taste like mountain spring water.

May 4 I ordered a washer and it was to be delivered on the 21st and on the 20th a salesperson calls me to say my ordered washer is out of stock and she gives me a substitution washer that wont ship to me until june 20th a month away even though I already had been waiting a month, I was very upset and said, I wont accept it but let me think about it, I thought there must not be anything sooner (BIG MISTAKE). So I called back and accepted but after getting off the phone looked online and found a washer that would be delivered on May 28th and it was just delivered no problem but now no one at WHIRLPOOL can find the subbed order to cancel and give me my refund from the out of stock washer... So I have paid for 2 washers and every time I try to get help I have an hour wait to get a person. I am a 65 yr old woman who has been put thru so much stress and it is not good for my health. All I want to do is cry.

On its 1st year, the water pump went out. It cost $200.00 to replace it. On its 2nd year, the circuit board went out, and it took $300.00+ to replace it. On its 5th year, the bearings went out and cost $250.00 to replace it. I bought this for $900.00, and I already have paid $750.00 plus the price of purchase which makes this washer $1,600.00. Whirlpool should compensate all of us who have worked hard and have purchased this product! I will never purchase from Whirlpool again. I can’t afford them. I should get a refund from Whirlpool. Don’t they care? Email me for these problems at **. I am so dissatisfied with this product.

I purchased this machine about a year ago and it is the biggest piece of garbage on the planet. The biggest problem is that it will not spin if the load is even slightly unbalanced. It does not clean the clothes. If you try to rebalance and spin the load, it adds more water and then gets stuck in a cycle where it drains and adds water forever. Do not buy one of these. I am finally surrendering and buying a different machine. A total waste of money.

Does not clean clothes as well as I was told it would. Very dissatisfied with the price and performance and would not recommend this brand to family members as well as friends. With the way the current economy is, companies like Whirlpool should reduce their prices!

My stove is great. The only thing I would change is one more big eye. Having two big eyes would really help. I also love the oven although I have to pay attention because it heats on the hot side. A cake will be done in 18 min instead of 20 or 25.

I purchased a #Whirlpool; 4.3 cu. ft. Mini Refrigerator Stainless Steel BC-127B from @Target. There was a delay putting it into service (6 mos), so the Target store warranty was expired. The unit remained in its factory shipped packaging until put in service, so nothing out of the ordinary there. After barely two weeks of use, the compressor died. I followed all instructions (including waiting 8-10 weeks) from Whirlpool, but still have not received a refund or been given any information beyond we escalated it to our warranty team but havent heard back yet. The unit was a poorly made piece of junk in other respects as well. There are dozens of complaints about precisely this - defective units - on any site. Do not be fooled by the dishonest way that #Targets website lists reviews. Dig deeper.

I have owned the Whirlpool Cabrio for one year now. I cannot express enough what a complete waste of money this machine is. It literally does not wash clothes in even the most basic interpretation of washing. Clothes are almost in the same position as when they were put in the machine. Dont even bother with stain removal, it just rubs stains in and makes them worse. Seriously beware. Very expensive and not worth one dime. Im replacing with the Maytag. I should have stayed with in the first place. I will NEVER buy Whirlpool again. Must have skipped the entire product development on this one. I wouldnt even give it a one star review but the submission wouldnt process without it. WASTE OF $$ DO NOT BUY.

This Cabrio washing machine is really frustrating....... It goes off balance all the time. It does not matter if you have a full load or partial load, I know it has a tendency to go off balance, so I try to put the clothes in evenly. BUT it doesnt matter, it goes off balance. When the washer is downstairs, it gets to be a pain. The lid lock is a pain also. If you forget to put something in the machine, you hit pause button then you have to wait forever until it unlocks, and wait forever to unlock when it goes off balance. When it doesnt go off balance, it washes everything just fine. But if I knew what I know now about it, I would have never bought it....... I would recommend a different washer and check the reviews, which I didnt do. :(

The built-in microwave above the stove was in the home when we bought it seven years ago, so not sure how old it is. Although it had a crack in the door, near the handle, weve had not one problem with the unit. The crack has not opened more, or gotten longer, in the seven years weve been in the home. The unit is easy to clean, and has worked perfectly. It is simple to use, although no directions came with it, it was easy to figure it out.

WHIRLPOOL WTW5000DWO WASHING MACHINE TOP LOADING 2014 MODEL - I purchased this above model at Lowes of Hagerstown MD. The first problem I had with the washing machine was the spin cycle did not wring out the clothes. The second problem was the spin cycle caused the washer to start walking. The washer was leveled prior to washing the clothes also water was still running into the washer after it cycled off. I call Lowes the next day and told them my problems and they replaced the unit with the same model. The delivery came and I hooked up the washer and placed a few items in the washer and allowed it to cycle through. The washer did the same thing all over again. It did not spin the clothes out and the water continued to pour in the washer. And spun out of balance. I contacted Lowes and advised them I was having the same problem. I also told them my cousin had the same model and they were also having the same problem. Lowes offered to replace the unit with a different model so I selected Samsung washing machine and I have it scheduled for delivery tomorrow. Also I wanted to let you know that the price difference was 100 Dollars more for the Samsung and Lowes told me that I would have to pay the difference. I told them I have been inconvenienced twice and I will not pay the difference, they then call in the store manager and he override the difference. Lowes of Hagerstown will try their best to make it right, its sad that the mfg will not bring a product to the market that will do what it is advertised. The federal and state government should fine these companies and replace the defective models when reported. Do it right the first time and you wont have a repeat of the same problems. Also not use the consumer as a guinea pig to try out new products.

Ive owned whirlpool appliances for forty years or more, and have been consistently pleased with them. My first washer and dryer lasted eighteen years while raising a family. Brand X lasted eight years with at least four repairs before we dumped the set. We moved and sold one set with the house, but my newest washer and dryer set is eleven years, and works fine. Ive had at least four ranges. We sold two of them with the houses, but theyve all been fine, just bought a snazzy new Whirlpool range as an upgrade. Im on my fourth Whirlpool refrigerator, but again we sold one with the house and we upgraded one perfectly good Whirlpool refrigerator to a bigger side by side with icemaker. Third whirlpool dishwasher. Weve moved a lot, leaving behind appliances and buying new ones. Sure, Whirlpool appliances break down, but they sell zillions of them, and you never hear about the zillions that never break down.

Whirpool Cabrio Washer - Do not buy this washer. Clothes are not clean. They are twisted with residue still trapped in the wadded up mess. Even if you select deep water clean, your clothes will still have the same dirty marks on them as when they went in. Also, there is no spin cycle. If youve got a bunch of wet towels you just want to spin the water out, you can forget it. You will have to do a complete wash. And the 1 star is not even appropriate but there is no choice of a big fat zero. Wasted a lot of money on this when Ive had great luck with Kenmore.

Bought a new oven for my new kitchen. Two weeks after install, I had to have it repaired. Less than 6 mos. later, it is being repaired again, for the same problem. Whirlpools policy is to fix it till the warranty runs out, then not their problem. Buyer beware, and if you do buy, make sure you get the extended warranty.

We have had the washer and dryer for over 10 years and they are still working great. We have had washers and dryers in the past within 2 years have failed, and repairs have cost us almost as much as a new one. Thank God for the ones we have now.

3/16/2019 washed a load of bed sheets, on the white clothes cycle, put the wash in at 9:21am. Left the house at 12:41pm. Wash still not finished! It was finished by the time I arrived back home, I was gone about 11/2 hrs. I have yet to complete a wash cycle in less than 1hr 15mins. I hate that I have no control over water level, that I have to put detergent in the bottom of the tub, and the damn lid locks! My clothes dont feel clean. Why does big brother get to decide how my wash should be done, when they dont pay my water or electric bills?

We purchased a Whirlpool Duet machine in September 2010. About a year ago, I started noticing tears and stains on clothing. Luckily, it was always on a washcloth or blanket, nothing special. Last week, it tore a 3-inch hole in my good jacket. I was not happy! My husband and I checked inside the drum and all around the seal. Neither of us found any rough edges. I thought if I called Whirlpool, they might have had a recall. They assured they had never heard of this problem. REALLY!!! Just look at all these e-mail complaints. Back to the old top loading - basic wash machine. Definitely not a Whirlpool!!!

Whirlpools front load washers do not have easy access to the drain pump filter. The entire front of the machine including the door has to be taken off to access the filter. When putting washer back together the parts are cheap and screws break. Most companies that sell front load washers provide easy access to the drain pump filter. Buy one of those instead of a Whirlpool and you will save yourself a lot of time and hassle.

I am not pleased with my self-cleaning oven. I dont even use my oven that often and I cannot get off even the simplest of stains on the sides, top, and bottom. I have tried to clean the oven three times and the stains from pie drippings are still not coming clean. It should not be this hard to clean an oven because my last oven was so much better and it was not Aqualift. The top of the oven is also very hard to keep the burners clean and looking like new. I am very disappointed in this oven and believe that this is false advertisement to the consumers. I pride myself in keeping my kitchen looking clean but this just is not working for me!

My Whirlpool French Door refrigerator will have its TWO year old birthday on September 15, 2015.. only if it lives that long! On August 8, one month and one week short of its 2nd birthday the compressor died. Of course the manufacturers warranty expired after one year. Thankfully, I purchased an extended warranty through the retailer. While this will cover my repairs, there is nothing that will cover the hundreds of dollars worth of spoiled frozen and refrigerated products which had to be discarded. I will NEVER PURCHASE ANOTHER WHIRLPOOL PRODUCT!

We got what was a top-of-the-line Whirlpool Refrigerator about 10 years ago. It is still running, BUT all of the drawers have broken at least once and the door shelves no longer work. The replacement cost for each item is ridiculous especially considering how flimsy the items are. We decided to look at Whirlpool Refrigerators since the one we have is still running. They have changed absolutely nothing in the drawer or door design. It is all still very flimsy especially compared to the competition. I would strongly advise anyone looking for a fridge to look elsewhere, since, obviously, the quality of the interior is not a priority at Whirlpool. Avoid Whirlpool Refrigerators. The drawers and drawer shelves will ALL break since they have put no effort into fixing obvious defects.

The washer is only a couple of years old. It does the job but its not something wonderful or great. The previous one was a Kenmore but it was built by Whirlpool. It works. Thats all I can say about it.

Whirlpool ED5FVGXWS refrigerator compressor failed after 24 months. No help from Whirlpool as the said 12-month warranty had run out. I do understand it’s my bad luck, but they really should try harder to back the products they make. Two years on a compressor is totally unacceptable. They could care less. I even proposed a $200 rebate on a new Whirlpool fridge. My bad luck wasn’t the compressor going out, it was buying the fridge in the first place. Shame on you Whirlpool! Viva la Mexico! They told me I could use it as a boat anchor.

I bought top of the line stainless steel Whirlpool kitchen appliances two years ago. Warranty has expired. Microwave error message showed need to shut door and press start. Door was shut, opened and shut door 20-30 times for microwave to start. Had to buy new Microwave. Now dishwasher now will not drain. Refrigerator ice-maker dispenser is too small and ice keeps getting stuck in dispenser. I am done with Whirlpool.

I bought a Whirlpool washer WTW4800XQ top loader. I have owned it for about two years and now it has tore up, the repair bill will cost almost what I paid for the washer. I feel it is bad business to sale something and it not last any longer than it has. No one should have to buy a washer every two years!!!! When it gets to the spin cycle it works fine and then all of a sudden it will beat and bang and if you dont get it stopped it will be in the middle of the floor. Im very upset and put out with Whirlpool!!!!

First, I was put on hold by the first female for 44 minutes, and then a second woman finally answered, and said she didnt know why she would send me to her, because she was in the sales department, and she put me on hold for another 25 minutes. I finally had to go, because I had an appointment. When I got home, I called back, and got a man by the name of John, and at least he recommended he could schedule a repairman. The problem I told him is, the inside wall of my refrigerator has 2 cracks on the side, and a crack on the back wall. I dont want a repairman to come, just to tell me he cant put 2 new walls inside of my refrigerator. I could not find an email, so I could email Whirlpool about this problem, and definitely, they were of no help. I bought the refrigerator at Lowes late 2003. I have never, in my life, seen the inside walls of a fridge do this. I spent a lot of money for this, for it to crack on the inside walls. It does not seem like something is right with this.

I purchased a Whirlpool Cabrio washer and dryer from a local appliance center. Everything was working great. After some time, the washer began to have error codes. I would have to turn it off and restart using more detergent, more water and more electricity to attempt to get a load washed. I did purchase an extended warranty. I reported the issue to Whirlpool and I have had 7 home repair visits while still under Whirlpools warranty. The first time, the repair tech went under the washer and tightened a screw. REALLY! The next visit, the motherboard was changed and the issues kept coming back. Well, the Whirlpool warranty was now over so the extended warranty had to be picked up from the appliance center. Things got worse and had continued repair calls. After I had enough, I called Whirlpool and spoke to everyone under the sun. I tossed it outside and bought another brand washer. Several weeks went by and this washer still under the shed, Whirlpool contacted me and bought back my washer, GREAT.Now, here it starts all over again with the dryer, same issues with motherboard. Only this time, I am 1 month out of Whirlpool warranty and need $385 for a new motherboard plus cost to replace. I call Whirlpool again but only this time, they show no issues with this dryer and are not budging. I toss it out and again, purchase another brand dryer. I grew more angry by the day looking at this dryer sitting useless outside. I had it hauled off as trash. My question is how does a consumer protect themselves against these manufacturers? I do understand warranties but if it smells like a lemon, acts like a lemon, it must be a lemon!

I purchased a Whirlpool duet front load washer 1/2013 new from Lowes. In 5 yrs it is my 2nd washer of Whirlpool. After 2 1/2 yrs, the bearings have gone out, also every time I run the cleaning cycle, water leaks out under the washer. My boyfriend looked the parts to fix the washer, since I called Lowes concerning the warranty and its out. Cost to repair, just in parts would be around $400, I paid a lot of money for a product to last only 2 1/2 yrs. Such a lack of quality in workmanship. With these price, there should be better quality. Do not purchase a whirlpool. 2 washers for them in 5 yrs is not a great track record.

I bought a top of the line Whirlpool dryer that cost me over $1,000. Havent had it for a month and it requires a service call. Have to wait two weeks for service! Totally unacceptable. The dryer is JUNK and now I am stuck with it. Horrible company. Bought from Home Depot.

My Whirlpool Cabrio has been a real workhorse of a machine. It has been able to take large loads and small loads and get them equally clean and fresh. This was a more expensive model but it was worth the purchase price as I have used the various features provided. I also have appreciated that if you leave clothes on the washer overnight they are still fresh in the morning.

Refrigerator door display cable failed. The company declared refrigerator is beyond repair. Cable must be replaceable, we cannot throw refrigerator for small fault. The cost of cable is hardly Rs. 200 and refrigerator cost is Rs 25000. It is a design fault. Company has to replace cable.

We purchased our brand new home ten years ago and we were thrilled it had a double wall oven unit that I had always dreamed of owning. Well, the first time I used the self-cleaning mode that dream became a nightmare! The oven was in cleaning mode and I was so happy as I had never had a self-cleaner before! When the cleaning was done, the door remained locked and the control panel was not working. After making sure it was cooled the next day, I called for warranty repair. They came out and fixed it and apologized for the inconvenience. I was thinking it was just a glitch and went on with life. Due to my husband’s business, we only live in the house part time as we do extensive traveling. My children are grown, so my cooking is mainly holidays and birthdays when we all get together. Since it is used so seldom, the need to clean is not as often as others might be. The next two times I cleaned it the same thing happened. The third time they came out they informed me that it was getting too hot in the cleaning mode and the steam was going into the computer panel and melting the electrical wire. They also said I would no longer be under warranty and from now on it would be my issue. The next two times I cleaned the oven, I did so the old fashioned way and skipped the self-cleaning. This week my oven started beeping and giving me a code and will not work. I called my trusted repair man and this is what I learned. The computer board is probably toasted. They no longer make the board, so he will have to send it out to be rebuilt. This will take 10 to 14 days and the cost will be somewhere in the neighborhood of $650.00! Are you kidding me?! How is this my issue? I have checked faithfully every few months, assuming that others are having the same issues, and that Whirlpool would be doing the right thing and recalling these ovens. Stupid me! This last time I had not even used the oven in three days and it still went out? I am old enough to remember when the first place you went to look for appliances was Whirlpool because they were good, they lasted and the company stood behind them. Oh, how the mighty have fallen. From now on they will be the last place I look! I’m not sure what is going to happen, but I can assure you I am not spending $650 to repair this piece of crap!

I just replaced our Whirlpool Accubake Double Wall oven, model RBD305PDS14, because it fried the control panel after being put on self clean. This was the second time this has happened and I have probably only used the self clean feature three times since we purchased the oven. Im not a specialist in defective product design, but having a control panel burn up two out of three times when the self clean is used suggests a significant problem. I refused to pay to have it replaced again and obviously did not replace it with another Whirlpool product or any other brand associated with the company. I see that this problem has a long history dating back quite a few years with Whirlpool doing little or nothing to resolve the issue. (They just deny any knowledge about any defect in the design.) Fool me once, shame on you! Fool me twice shame on me!

I absolutely hate this Cabrio machine. This should be off the market. Shame on them for selling this. Salesman sold me a bill of goods on this washer and dryer. I have to wash some clothes 3x or hand wash. Whirlpool told me to use bulky or delicate cycles, as this puts more water into the machine so my clothes will rinse clean (doesnt work). When I wrote, they didnt even offer to make a service appointment. They know they have a bad product! I agree. Greed.

This washer & dryer is the extra large capacity combo. Uses less water but surprisingly the clothes come out clean as a whistle. Less detergent. Sin all cleans clothes excellent & saves you money. A win/win!

This microwave is one of the best Ive ever used. Ive had several brands from generic on up and this one takes the cake. Its very reliable. It works excellent and heats up fast. Ive had no problems with it working to full capacity or any fear of it breaking down. Its pricey but well worth the cost if you want worry-free warming and cooking.

The drip hose had to be replaced 6 months after I purchased the refrigerator. At that time the warranty covered the part but the technician told me that Whirlpool was aware of the problem. About 5 months after the warranty expired, the same problem again - ice built up on bottom of freezer and water leaking out from the left side leaving a puddle on the floor. I called Whirlpool and they said warranty is expired. I tried to tell them about the defective part but to no avail. Had to pay to have drip hose replaced again. One year after that the main CPU board went and had to be replaced ($350.00). I sent the part back to Whirlpool, registered mail, hoping they would respond with a yes, this was defective. Their response back to me was, “warranty is over.” For a main board to fail in a $1500.00 refrigerator in less than 3 years was uncalled for. Two days ago I noticed the puddle on the floor and had to call in a technician and ONCE again the drip hose had to be replaced ($160.0). He told me Whirlpool is well aware of the problem and there is a Service Pointer out on it and the code is S38211. Thanks for nothing Whirlpool. The refrigerator was a lemon and you did nothing about it. I wish I would have read these reviews first. No more Whirlpool products for me! PS. I was a dedicated fan of Whirlpool for 40 years!

We installed this furnace along with a matching 4ton a/c unit over four years ago. It was installed with a 3 zone computer controlled damper system to separately condition the three floors of our home. This furnace was ideal because it has a dual stage combustion chamber depending on how much demand there is. So besides being 95% efficient, the furnace can run at 70% or 100% heating capacity which saves on utility bills when the whole house doesn't need heat at the same time. It also had a variable speed blower which made start ups and shut downs almost unnoticeable. The blower actually ramps up to speed discreetly and adjusts itself according to the amount of back-pressure it senses. This allows it to respond to varying conditions as each of the 3 thermostats are calling for heating or cooling at different times. And yes here in St. Louis we have had days that require heat on the first floor and a/c on the third floor at the same time. The controller cycles between the two every 15 mintutes. All of these features make it ideal for our 2200sq ft three story brick home(four including the basement where it is installed). This furnace and control system along with new ductwork and dampers were able to replace the two old furnaces and a/c units originally in the home. We haven't had a single problem with it in over four years and would recommend Whirlpool Gold products to anyone I know. If I ever had to do this again in another house I would do exactly the same thing with exactly the same products.

We have a 2 1/2 yr. old Whirlpool gas stove. We have had the mechanic here several times as it would not ignite. We also have had the control panel repaired twice as it melted. It is melted again but they will do nothing. I tried to clean the oven with their AquaLift technology and had to re-do it four times and still have residue which appears to be permanent. We are very frustrated with it. We have used Whirlpool appliances for over 40 yrs. but will not buy another. Model#WFG710HOASO, Serial#R21712236.

I bought a Whirlpool Cabrio 1.5 years ago and it has already died. Repairman need to replace the control board which had gone out. $450.00 to replace that piece, but could not guarantee that it would be the only problem. The motor or some other issue may have caused the board. This machine was purchased at Home Depot on sale and at $450.00 to repair would be approximately 70% of the original price. It will be cheaper to buy a new one rather than fix this one. We were not happy with this machine in the first place. It leaves the clothes stained with a white powder that never rinses off. The cycle time is very long, up to an hour to wash a load. The clothes are still very wet once the cycle is finished, which of course increases the drying time. I cannot recommend Whirlpool top loaders after my experience with this machine.

Whirlpool Cabrio - I have had the same experience as those others that have written reviews - over $1,600.00 (on sale) - approximately 3 years old and I was just informed by a service repairman that water has leaked from the center of the tub into the motor and it is trashed. I went to the Whirlpool website to chat with a representative and they are sorry but unfortunately, we cannot guarantee there will be no repairs or parts replacements needed as components do deteriorate or fail on occasion due to factors over which we have no control - they went on to say that since the washer is approximately 3 years old there would be no assistance that we would be able to provide toward repairs. I agree that a class action suit should be considered since Whirlpool is taking no responsibility for a machine that costs too much - makes your clothes smell and lasts for such a short time. Highway robbery!! The dryer is no better but at least it is still working (today anyway!).

3 months after warranty the oven will not stay on. I will stay on for only 20 minutes then it goes out. It clicks but will not come on. I can only use my oven for backing biscuits but cannot bake chicken or meats.

I bought the Whirlpool model e2h50rd045v electric water heater to replace my failing gas water heater on July 21, 2014, and had it installed a couple of weeks later after a little over 3 years of use. The water heater is still working with no issues or major problems. I'm happy with the decision to purchase this water heater.

Whirlpool Microwave WMH1164XWS-1 - Well, Im sure surprised that my almost five year old Whirlpool microwave failed to heat this evening. One minute it worked, next it didnt. Watched countless repair videos, but it seems more aggravation taking the unit out and trying to diagnose the issue than its worth. Probably the same with enlisting the services of a repair tech. Ill probably think twice about purchasing another Whirlpool microwave. I purchased a Whirlpool French Door Refrigerator a few months ago and now Im concerned Ill have the same issues. All my appliances were Whirlpool and purchased ten years ago and replaced with newer models, even though I never had any repair issues. Guess they dont make them like they used to!

I am extremely disappointed in my new Whirlpool washer dryer matched set. My washer started to leak at less than 6 months of age, and my clothes are extremely wrinkled due to excessive spin and smell absolutely foul. I have adjusted the spin cycle to the lowest setting to prevent wrinkling as suggested in the product materials. I have cleaned the washer with the recommended product on the clean washer setting, although now with the leak, that means a good floor mopping too!I have contacted customer service about the leak since the machine is still under warranty - and they gave me a 4-hour window on a specified day for the service. I took the time off work and the technician failed to show. I called twice to follow up on his whereabouts and ETA. They did nothing except tell me to keep waiting. 45 minutes after the outside hour of arrival had passed, I called again. The customer service offered to make me another appointment so I could take another half day off work and hope he would show up the next time. When I asked for a preferential booking (with a real time) to minimize taking more time off work, the manager said all she could do was give me another 4-hour window. I said that was really bad service and she hung up on me! Another rep did do a little better - he sent me a name and number and said I could try to book an appointment directly and hopefully minimize the additional time off. Its the last Whirlpool appliance Ill buy - with that kind of customer service, Id rather be out pounding my laundry on a rock.

This refrigerator is only days old and I realize the mistake that was made in buying it- it is far too noisy! When it is running I can hear it in my basement- sounds like a car in my driveway idling with no muffler!!! And when it stops running, it gurgles loudly for 10-15 seconds. Dont even start on the door being hard to pull open after the door was recently opened.

After the one-year warranty ran out, my wife ran the self-cleaning feature, which since Ive found is a well-documented problem in online forums. The oven overheats and blows out the thermostat, fuse and some other cylinder device, all in all a $600 repair. I am furious that both Whirlpool and Ikea (where we purchased the electric oven) keep completely silent on this issue, not bothering to tell homeowners to use this function at their own risk. Just wipe it out! The well known nature of this self-destruction and potential high cost of repair should be information given to consumers, but of course this would affect their sales numbers. BE WARNED!

Purchased a brand new Whirlpool hot water heater, but it has never worked properly. The 1-800 help line has been no help at all. Every call results in another step we have to complete before they can fix the problem. Bottom line - never, ever, ever buy a Whirlpool product. They dont know the meaning of customer service.

Whirlpool Quiet Partner II Model # DU1055XTUS1 - We bought the dishwasher in Aug 2010 and after the 2nd yr, it started to occasionally shut off by itself in early cycle. After 3 yrs, it now shuts off repeatedly... needs to be restarted at least 15 times. It use to shut down early in the cycle. Now it shuts off whenever. I should have read the reviews on this dishwasher before buying but it was on sale for such a good price. I guess I got what I paid for. Just keep in mind that Whirlpool dishwasher seem to last only 3 years. I guess thats also why their warranty for electrical parts is one of the worst compared to other brands.

I bought a Whirlpool washing machine, model WTW4855HW, and was I ever shocked at how noisy it was. The wash cycle had a grinding noise that was just too much. After 2 loads I sent it back and didnt regret having to pay the restocking fee. I just couldnt believe that with all the technology we have today, that they couldnt build a quiet machine. Im an engineer so I know there are methods through gearing, belts, soundproofing, etc, to produce a quiet machine. Remember the dishwasher of days gone by. You couldnt watch TV with the dishwasher going. Nowadays, you can stand in the kitchen and have a nice conversation with it running. The technology exists. As a matter of a fact, my old Maytag that finally went bad after 10 years was fairly quiet. So, if you dont have your washing machine in the garage or basement room where you can close the door, dont buy this machine! Bruce in Portland

I have owned this Whirlpool Cabrio machine and dryer for almost 5 years. It has been a nightmare. I am forever getting it fix. Now its the notorious LD light, not draining, and it has actually drained, and the company I bought it from does not repair them due to so many problems. Got a plumber to look at it and got it to work.. This is after the company came, charged me 130.00 to tell me they dont repair it. I bought this machine because it was large and I have a big family, energy saver (no, it did not save as much as they claimed) and uses less water. The dryer is wonderful. But the 1900.00 I paid for them was not worth the price. I now have to go up and down my cellar stairs 6 times per wash to stop it, shake the hose, and restart it. A load of laundry takes close to 3 hours due to starting it over. I am gonna buy a Maytag which I use to have and take this to the junkyard. Thanks a ton, Whirlpool and I read all comments and they are ALL true.