I never knew an appliance could be manufactured as poorly as my brand-new, expensive, side-by-side whirlpool refrigerator. Within the first year, the icemaker line malfunction because of a fan problem, causing the line to freeze, break, and leak water everywhere. The ice maker stopped working. Everything on the top shelf In the refrigerator freezes. Everything on the bottom shelf stays warm. The motor is so loud and can be heard of rooms away. It is less than two years old now, and I am sincerely considering buying a new refrigerator altogether.

Here in Brazil, we use to have a very good brand of durable and reliable refrigerators and home appliances called Brastemp, and I was a very happy, fidelized customer of theirs. The time came for me to move to my new house. I gave my old appliances away to friends and modeled my new kitchen with Brastemp products. What I didnt know then is that Whirlpool bought the brand in 2000 and was selling their appliances over the Brastemp brand since.Whirlpool is clearly selling disposable appliances here. My vacuum cleaner failed after a week. My brand new refrigerator and laundry machines failed weeks after the one-year warranty and the dishwasher sometimes heats up and tips the 20A circuit breaker (suggested by the manufacturer), which is only for the dishwasher. For my complete surprise, my old appliances are still functional in my friends house. I got my old dishwasher back and I had absolutely no problems since.The vacuum cleaner failed again, this time 5 months out of warranty. In all fail cases, the price to fix it was about 70% of the price of a new one, which I took as a sign to replace them for something else. Good job, Whirlpool! You bought a nice brand, trashed it and gave the finger to fidelized customers you acquired with the new brand by replacing quality products with built-in obsolescence others. What do you plan to do next? Whatever it is, dont count on me as a customer ever again.

This Maytag dishwasher is awful. The parent company is Whirlpool and their customer service is as bad as their products. I bought this dishwasher and less than a week later the pump isnt working and stagnant water is sitting in the machine. It took Whirlpool 3 weeks to replace the machine and they sent over another defective machine. This time it lasted less than 2 days. The Whirlpool customer reps are rude and vindictive and antagonize the customer with their lack of service. Called corporate office with no help from Cust. Service and was told to leave a message with the operator and await a callback. With this fiasco I wouldnt buy another Whirlpool or Maytag product again. BTW. Im still awaiting my callback from the corporate office... Im not holding my breath. I called the company that I bought the dishwasher from to see if they can help me unload this machine and get a different brand...

New whirlpool washing machine 2016 - This washer is supposed to be smart, but it NEVER fills up with water! I always have to fill a bucket with water and throw it in the washing machine. My clothes do not come out smelling fresh and its not the detergent to blame, its the washer! Im so disappointed with this product. Whirlpool should stop making products.

Whirlpool Gas Range Model WFG524LAB0 - Purchased on 09/2013. Product works well but noticed back in July 2014 that cook top was not cleaning well. Did not mind it that much thinking it was just baked on grease and would just do a general cleaning when I get to it. After the holidays and now getting around to clean the range top, I discovered the cause of range top not cleaning well. The porcelain was chipping away.Today I called Whirlpool customer to complain and see what they do. They replied that it was just a cosmetic blemish and that was not covered under warranty. I told them that that cosmetic blemish lead to rusting and eventually result to failure of the product. They also said it was out of warranty but was eager to have a tech come over to check the problem out for additional fee.

On March 3, I purchased a dishwasher (Model: KUDE70FXSS1 Serial No.: F10202361) on Whirlpools VIP link, which will more likely be my last Whirlpool purchase based on the slightly damaged product and incredibly poor customer service Ive received. Upon delivery of the dishwasher on March 9, I noticed that the left rear wheel was damaged and slightly bent. I also noticed that the unit was a little off balance. But the delivery person explained to me that everything was okay and that the front legs just needed to be adjusted. I believed him and signed the delivery receipts with the additional note about the left rear wheel being damaged. At the time of delivery, the driver also happened to mention that J.B. Hunt did offer installation services for dishwashers. I then called Whirlpool customer service, which pretty much gave me the cold shoulder, and said that it wasnt in their policy. I had to request the installation service at the time of purchase and Whirlpool would not send someone back out. This made me upset because I initially wanted to have the dishwasher installed but your VIP link didnt show an option for installation. Im not sure how Im supposed to request the installation services when theyre not being offered. But the genius customer service representative thought that I should intuitively call Whirlpool when the link isnt on the website. This is the first demonstration of Whirlpools poor customer service, in my opinion. After a couple of days of driving around to get a hose and a cord to perform the installation, I finally installed the dishwasher on March 12. Once installed, I noticed that the hinge on the left side was rubbing against the tub of the dishwasher. The door hinge was bent and the main tub was slightly damaged. Again, I contacted Whirlpools customer service department who sent out a repairman who confirmed that the dishwasher needed new tub and hinges which were covered under warranty. Unfortunately, he told me that I would not receive a new dishwasher since I installed it myself. He would order a new tub and hinges and transfer all the equipment and wiring from my original dishwasher to the new tub. Essentially, I would have a refurbished dishwasher at a new price, which I do not want.I initially wanted to have the dishwasher installed but your VIP link didnt show an option for installation. If Whirlpools website worked the way it should have and offered an installation service, I wouldnt be in this situation. I would have paid for the installation and the people installing the new dishwasher would have realized that it was damaged prior to them leaving and ordering a new dishwasher. I am a customer and not a dishwasher repairman. No normal person would have been able to catch the damage that is on my machine. Second, I find it hard to believe that Whirlpools policy states to have all the equipment from my original dishwasher installed on a new tub. So, I paid $989 for a new dishwasher thats really a refurbished dishwasher because of the damage. I wish I would have visited this site prior to purchasing. I will never deal with Whirlpool again.

My dishwasher was a $300ish model from Lowes. It is over 5 years old and has been reliable for a single persons use. It is run about once a week on average. Early on I had problem with it not cleaning well but that was the fault of one of those no leak supply hoses that restricted flow...fixed that. Would I buy again? Yes.

My husband and I purchased a Gold Series, French Door refrigerator/freezer in 2012. Everything was fine until our icemaker took a dump a few weeks ago. It had to be replaced. Taking time off from work to meet the repairman with that repair was an inconvenience but it was only magnified when we were told he would call us an hour before the repair, which never happened. We were given the usual 4 to 5 hour window in which we could expect a service call, which is the standard these days. But I had to rush home when he called because we never got that courtesy call an hour before. The repair, as frustrating as the situation was, was made and we thought that would be end of that for a while.Things were fine until today when I discovered puddles of water on our wood floor as I was leaving for work. While mopping things up with a paper towel and trying to determine what the problem was, I discovered a frozen puddle of ice on the floor of the freezer when I pulled it out. This situation, obviously, was more urgent than the last one we had a few weeks prior so we were hoping for a bit more than the Well have someone come out on the 20th response I was given. It was only after jumping through hoops like a trained monkey at the circus and raising my voice a few times out of frustration, did we get a call from the actual repairman who said he would be out within a couple of hours.By his own admission, the small rubber seal the repairman replaced somewhere in the refrigerator, was known by the manufacturer to be an inferior part. He told us they are well aware of the problems caused by this inferior seal and that they eventually need to be replaced with one that is of better quality. Apparently, its cheaper for them to use the inferior one, and they choose to disregard the inconvenience, not to mention the potential damage that could be caused to a persons home because of it.We have a great many concerns on a great many levels surrounding this product and the way we were treated as paying, extended warranty consumers. This refrigerator was a major purchase for us. We placed our confidence in a company and a product we thought we could trust; not to mention making the assumption that if we paid good money for an extended warranty, a problem like this most recent one would meet with more of an eager attempt at getting us the help we needed without having to become as insistent and frustrated as we were forced to be.How disappointing to discover that spending over $2,000 on a major purchase like this and then being told we would have to wait 3 to 5 days for a repair. Having to take time off from work, or being told to wait for up to 5 days for any sort of help to replace a small rubber seal, known to be of inferior quality, that was replaced in 10 minutes is absurd. Think twice before spending hard-earned money on this product!! The tragic lesson, however, in all of this is the verbal confirmation by the repairman that just about all manufacturers are the same when it comes to corporations trying to save $$$ and blowing off the inconvenience and expense of their customers.

We have had a GX5fhdxvy 07 Whirlpool Gold French door fridge with bottom freezer that is approximately 4 years old. Since the first 6 months of use, so 3.5 years now, we have had continual problems with a flat sheet of ice on the bottom of the freezer which then builds up and leaks all over our floor. Twice I have slipped, once banged my big toe to the point of cracking my big toenail and bleeding profusely, and the second time I slipped on my butt and really hurt my back. This is of real concern as one of my children has Cerebral Palsy and autism and could really hurt himself in our kitchen. We originally called while it was still under warranty and the technician said that we will need to learn how to defrost the tube that seems to be getting built up with ice. Thats the only way to fix it. We thought it meant fix it for a long period of time. After several months of this re-occurring problem, we realized that this is something you need to do very frequently, meaning several times a week. We have had no help from Whirlpool, they tell us that essentially it is our problem. They didnt even offer to provide parts. They were not interested in our problems and just asked us if we wanted to pay for a service call, and that was it. Now but what kind of service is this?? Clearly, after researching these products, this is a design flaw and a lot of consumers have complained about the the same issues. You would think that Whirlpool would have the decency and the business smarts to create a recall to solve consumers issues.Unfortunately, I am not able to purchase a new unit. This was an expensive purchase as it was… and we have absolutely no resolution to the problem. I have to say that after our injuries in our household, eventually someone will slip and do some serious permanent damage to their body or even worse, fall and sustain a head injury and perhaps even die. And although this may seem like a far fetched comment, it really isnt out of the realm of possibility at all! How long does it take for a manufacturer to respond to a flaw in their design??

I bought a Cabrio top loader in 2007. Have now replaced a pump for the 2nd time. Replaced a circuit board once. Thank goodness the machine was purchased at a local appliance store who stand behind what they sell and are very prompt in their response time.

Whirlpool Cabrio Platinum Option - Very stylish. Well built - very solid and heavy constructions. Full features from quick wash to sanitary wash, very energy efficient, steam setting on dryer for touch-ups. Quick loads, etc. We were looking for a washer and dryer set that would accommodate large quilts and blankets and still have the flexibility to handle small and delicate loads, and be energy efficient. The Whirlpool Cabrio Platinum Option is solidly built and very sturdy. It handles small and large loads and is very energy efficient. Both the washer and dryer handle sheets and pillowcases without a problem. Wed recommend them to anyone.

Bought the Whirlpool Cabrio in March of 2013. From the first day we used it, it Never cleaned our clothes. There is not enough water to clean the clothes. I put some grape jelly on one towel and washed 5 more towels with it, and guess what the stain and jelly are still on the towel. l went over to my daughters and washed the same towels on rinse, and the jelly was gone. Remember, it was on rinse. I THINK the CEO NEEDS to come to my house and wash his white shirts. This is a design problem. Yes, it will save you money, you dont need soap, because the washer doesnt clean your clothes with water or soap. SO, l would like to send the head CEO, this washer. l would love to see how his wife likes this WHIRLPOOL CABRIO... REMEMBER ITS US THAT KEEPS YOUR COMPANY GOING.

Cabrio Top Washer - Disappointed!! Its selling point was using less water but do they realize that you DO have to use a little water to clean clothes. Leaves residue on every load and where I have to use the extra rinse cycle and that still doesnt work. This product is going on eBay today! Never again Whirlpool.

My 5-year-old Cabrio started coming up with error codes, and not draining and spinning the clothes. I called a week ago, they offered me 2 options, one being put $339 on a credit card and that would cover all parts, labor, and a 1 year extended warranty. They charged the credit card immediately for the biggest piece of crap washing machine. Someone came out 2 days later and told me he has worked on a lot of Cabrios but never one in quite that condition. I was led to believe that after charging the credit card, boxes would be arriving with parts to fix it. I called 2 days later to find out the status of when it would be repaired and they told me they already put a credit thru on the credit card because to fix it would be equal to the price of 2 brand new washing machines, and they will do nothing to honor that agreement. So I now have a piece of ** in my laundry room and takes me two days to do a load of laundry. DO NOT BUY THE CABRIO! In fact Im not going with a Whirlpool ever again!

Whirlpool electric range oven wont turn off. Used the oven 2 or so times per year.... Very unsafe, expecting internal breaker that would shut the thing down. Whirlpool Range/Oven PT3196685 happened on 6-10-2014, was baking cookies with timer on for 9 min. First batch turn out good, 2nd batch on fire before even get to 6 min, the burner is brightly hot and cant shut off from the panel... Saw ERR then COOL indicator... Tried but no respond from panel. The burner element wont turn off and temp keep rising white hot... The only way to shutoff is the house circuit breaker. But soon you turn on the breaker, the oven would turn on by itself and you cant switch it off. Where is the safety breaker on these range/oven when something goes beyond 500 degree..... UNSAFE PRODUCT. Ordered a new Whirlpool Gold 700 series but canceled after discovered others experienced similar situation with the new product. Could have burn down the house and worst when lives involved. WONDER IF ANYTHING WAS DONE TO CORRECT THESE SAFETY ISSUE.

This Whirlpool top load washer has been an awesome product. I have had it for 9 years and havent had a bit of trouble. Its very quiet and very reliable. The only maintenance is running a cleaning tablet on the cleaning setting once per month, and it tells you when its due... No musty smell problems that I hear from people with front loaders. Its a great product.

I purchased this Whirlpool Cabrio Platinum washer on 12/1/12. I started getting an F1 fault and all the lights on the machine light up like a Christmas tree during cycles now. I thought I would research Google to see if others were having the same problem. I was VERY disappointed to see all of the same issues others were having with this high end washer. Without even calling a repairman, I know that this motherboard fix is $400+ based on all of the negative feedback. We have a large Whirlpool plant in my hometown, and I hate to see the lack of resolve by Whirlpool.

Purchased on 9/12 at Home Depot. Ice maker paid for as stated in ad for home depot, did not come with fridge. Tech needed for warm food, had to repair gasket. Tech needed for cracked handle. 6 calls for freezing food in fridge compartment. No resolve. Whirlpool wanted a 2nd opinion and another tech came deeming the fridge unrepairable. Not good enough for Whirlpool. After speaking to several customer service agents, they said they do not refund or replace, only repair. I have lost hundreds of dollars of food from freezing. My fridge is reading at 31 deg. This is way below what it is supposed to read at. No call from Whirlpool since last tech came. Their customer service is terrible and cold. Whirlpool Corp. was not any help either. You can see the problem with this model if you look up Whirlpool fridge freezing food in Florida, as a woman there called ABC news and they reported it. I will also do the same.

I bought new townhome on 2018, in 6 months the top drawer broken, because stuck, after one year passed from the one year warranty start freezing all my groceries, milk, fruits. I turned off many times, not fixed. I am surprised paying so much money for appliances and turned out so cheap products and last only one year!? Older fridge last 10-15 years!! Companies ripping off people pockets. Very unhappy about this. Now services technician coming we have to pay for ....

I had the biggest nightmare with your sorry company. On 01/05/2013, I purchased a new 50gal electric water heater from Lowes in Waco, TX. I got the unit installed and the damn thing would not heat. I followed your lame support instructions. I contacted your support tech and diagnosed everything possible. I was told I needed to have an electrician to verify that I was getting enough power. That cost me $75.00 bucks and everything checked out. He was not able to check the water heater since he was not a Whirlpool licensed tech. So I called Lowes to return the water heater. Now this is where your policy at Whirlpool suck! Lowes is not allowed to take back/exchange your crap without an RMA number. I had to get it from Whirlpool directly! I called Whirlpools customer service. They flat out refused to do so. They stated that I need to get a certified Whirlpool tech, but it was up to me to contact one! Their nearest one was from Dallas (2 hours away) and could not come out until later next week! I told the tech that its unacceptable! She even refused to get a supervisor! Plus now I blew up on this one. I had to pay the tech $75.00 up front plus the $75.00 an hour to which it would take 2 1/2 hours for repair. Meaning, I would pay more in a damn service call than the actual cost of the new water heater! Oh, but they would refund me in 60-120 days. I would first verify the work was done and if any overcharges, it would not be refunded! So I say to Whirlpool/GE, your warranty policy is a bunch of **. This includes your customer service team as well! I will never ever purchase a Whirlpool or GE product again. Samsung now has my business. May your company fold! Youre a worthless corporation that continues to rip the Americans off!

My model # is WTW4800BQO. Purchased 05/20/14 and, under warranty, had repair come several times and they finally supposedly replaced the brain of machine and said nothing further could be done. So all this time I operate the machine manually - timing everything from wash to spin. On all cycles I have to manually - actually turn off machine when first wash is completed and reset to rinse and spin otherwise it only partially fills and drops the water right away on the 1st rinse (besides also dropping water on 2nd rinse). Also I came home one day, after completing a wash load earlier, and found the machine filling up with water automatically so now I always have to be sure the machine is unplugged when washing is completed.

This washing machine was already in the house when we purchased the house two years ago. In those two years, it has performed well for the most part. It has many different cleaning options, the clothes come out clean, it saves on the amount of water it uses, it’s quiet and I like the fact that it is a front loading washer.

Whirlpool built in Electric oven Self Cleaning Model # GBS307. Dont Clean your oven! Everytime you clean the oven, the thermal fuse switch will burn up on you and will cost approximately $150.00 to fix. Dont use the self cleaning on this oven!

Has multiple wash Cycles. Big enough to wash a comforter. Has a delay setting so I can set it 8 hours in advance. Easy to load, easy to add the wash ingredients. Its a top load so its easy to get everything in and out.

I purchased a matching set Whirlpool Cabrio top load washer and dryer in 2007. Bought from Conns for $2,100. After 3 months of ownership, the circuit board had to be replaced on the washer. Three months later the heating element was replaced on the dryer. Just recently I spent $350.00 to replace 4 drum suspensions. The washer literally shook my home. 3 weeks later, the circuit board needs replacement (code F1). Estimate to repair - $325.00. The dryer is not working properly. Im having to run the clothing thru 2 cycles. Back to the washer. It shreds my towels. Ive read where other consumers have had this same problem. These are expensive towels. So, only 7 yrs. into ownership and I am replacing this junk with the old school washer/dryer. Unlike the Cabrio washer, I will have a washer with an agitator that will actually clean my clothing. Whirlpool manufactures trash and the Cabrio duo was the worse purchase I have ever made. Do not purchase Whirlpool and definitely do not purchase Cabrio.

We bought this pair, the washer and dryer, not even two months ago. I have not liked it since day 1. My clothes do NOT clean well at all. I had to wash the same load THREE times and still there is dirt on them! Just regular dirt. No oil, grease stains or anything... dirt. I even went and purchased POD detergent to make sure I was using the correct amount of detergent... Came home and washed the load again... DIRTY. Customer service says theyll send out a technician, but if they find nothing wrong, itll cost me... I wish I had read the reviews before I purchase this junk! DO NOT BUY!!!!!

Model # WRF990SLAM00 Ser# K23919328 - It should be possible to rate this piece of junk zero stars!! Purchased on Feb 2013, it is driving me and my wife insane. It is noisy compressor wise all the time (Our kitchen and living room in the townhouse are one room). The problems started after the hurricane in 2016 killed our power for three days. I had to shut the refrigerator down to manually defrost the freezer section because the fan on the fan-coil was hitting a huge accumulation of ice. Then the weird blackouts started approx once per month where the panel light as well as the interior lights went on and off every minute with that dreadful BEEP. This went on for over 24 hrs and made living in the same room HELL. The beep and three clicks happen every minute and the cooling is none. Whirlpool service came ($80.00) just to look at it and will come back with the rest of the bill which probably will be astronomical. I feel cheated big time!! Minute and the cooling has worsened big time. Whirlpool service came ($ 80.00) just to look at it and stated it needs a new computer board as well as a new front panel on the left door.

I purchased a brand new 2019 Whirlpool side by side refrigerator in October of 2019 for my new house. Yes, that was 2.5 years ago. HOWEVER, I live alone and hardly ever use the ice dispenser. Maybe, it was used 20 times in 2 years. The ice dispenser just stopped working and today I notice the refrigerator is not even making ice! What a piece of garbage!

Do yourself a favor and do not purchase any Whirlpool gas heater product. There are numerous poor reviews on Whirlpool water heaters. The one I purchased, 50 gallon Whirlpool water heater; I had to replace the control valve three times. After the third time, (the water heater was less than 18 months old) I gave up and purchased another product. Whirlpool would not replace their poor product, but did replace the control valve, each time, which cost $100,00 labor each time. After the water heater was taken out, there were visible leaks on all connections. (A licensed plumber installed it.) Over a period of time, I lost a total of three days work, was w/o hot water three times for two days each issue. I hope I can save the next consumer similar difficulties with this product. Check consumer reports before purchase of this product. There are numerous complaints. Also, local plumbers can advise on how many issues they encounter with this product.

Whirlpool Cabrio Washer and Dryer - The washer does not stay balanced even with a very small load (even though advertised can wash King size comforter). Even with a light load, we have to put the dryer on Heavy Duty or Bulky...and usually have to dry a second time. When attempted to contact Whirlpool, no help available. WORST PRODUCT I HAVE EVER PURCHASED... Would not even want to GIVE this set to a friend or family member. DO NOT PURCHASE THIS PRODUCT.

I bought what I thought was a great washing machine. It is a top loading Cabrio from Whirlpool. The machine leaves white residue on all my dark clothing. It is a disaster. I am following washing instructions exactly, using HE detergent, loading the right amount, I even tried using PODS. I tried different temperature water, different cycles of washing and spinning and the same thing happens. I had an old Maytag that broke that cleaned beautifully. This thing is a piece of garbage and I would love to send it back if they would let me. DO NOT BUY IT. I AM BEGGING YOU, YOU WILL BE VERY UPSET.

Refrigerator stopped cooling... Paid $200 to have it diagnosed... Cost more than a new refrigerator to get fixed...$14,000. Refrigerator was 7 years old, energy star. How can it be energy efficient if it was made to last only seven years? How much energy is wasted making new ones to replace the broken ones, that cost too much to fix. Energy star. What a scam.

My 2 year old refrigerator died. I called Whirlpool and their customer service is horrible. Finally after weeks was able to purchase another refrigerator from them directly at a discounted price and they sent the wrong one. I kept it because I could no longer live without a refrigerator. Horrible company, terrible customer service and even worse product.

I was gifted a washer and ventless dryer for my condo. It takes a little longer than a regular dryer but it works great. It fits perfectly in a closet.

After happily using Maytag washers at my old address for 30 some years, I moved to my current address and in 2006 I purchased a new Maytag. In 2010 I needed service. I was advised it had a bad bearing and was not advised to repair as it would cost well over $600.00. I purchased a Whirlpool Cabrio top loading HE appliance.The Cabrio worked well until one day it made a horrible noise. Although it still worked, I called for service and was told it had a bad bearing and would cost $670.00 to fix and they advised against it. After the service call, it never worked again. I know things dont last like they used to but 4 years is ridiculous. I have been advised that Whirlpool bought Maytag. Is this what to expect from so called reputable companies?

Whirlpool WRF993FIFMOO: Refrigerator Problems: the doors do not close, both ice makers went out, The computer on the filtration will go off. Refrigerator had problems maintaining temperature since 8.12.17. The refrigerator no longer works. This is my second unit since 11.09.16. It came from nfm.com.

Spent the extra money to have a beautiful, slide-in oven. The AquaLift technology just seemed like another plus. After the turkey cooked, just seemed like another oven to clean. The AQUALIFT does not work, except for the bottom of the oven!! A fresh oven cleaner? Only available only. Get this beautiful range, not AQUALIFT TECHNOLOGY. CLEANING with it.

Bought this model from Bad Boy in 2006 and just after the warranty ended the problems began. We kept getting the F1 error code so with a little internet research we found it was a known problem with Whirlpool. I contacted them and was told they knew nothing about this issue being nationwide, however I emailed them copies of the complaints and responses. They sent out a technician who had to replace the motherboard free of charge. Next issue was a loud noise coming from washer sounding like a jet plane taking off. Hubby ripped machine apart to find the bearings blown apart and in tiny pieces. We ordered new ones and also found that when the new ones arrived they came with a tube of grease and a sealer to use so water would not get in later and cause more problems. Funny there was no sealer on the original bearings.Next the lid lock finally failed, ordered a new one but did NOT install it back into the machine, now it sits beside the machine. In case it fails again we will have total access to the laundry this time. Finally the UL error code keeps coming up. I refuse to put any more money into this machine again so I am allowing hubby to fix it if he chooses, whichever way he wants as long as no money is involved. So right now we have bungee cords holding the suspension rods tight to help with the uneven load code coming up all the time. Personal thoughts - DO NOT BUY WHIRLPOOL washer/dryers. They are crap and the company just does not care and they try to lie their way out of repairs if people have not done their homework.

Shortly after the warranty expired my refrigerator started building ice on the floor of the freezer. With the build-up of ice the freezer started leaking on the bottom. Sometimes it gets so bad I have a hard time closing the freezer door properly. The Model# GB9FHDXWS06, Serial# K31505096 of my Whirlpool refrigerator. I do not recommend any Whirlpool product. Do your research before you buy any Whirlpool product.

Without being too critical, I would not recommend this washer for medium to large loads or for throw blankets. I have to wash throw blankets 2 to 3 times to get the entire blanket wet even on deep water cycle. I would not buy this washer again.

I have had my water heater for 5 years and the repair is going to be close to $300.00! Whirlpool offered to send me the part and if I want hot water tomorrow I can pay $30.00 for shipping! $10.00 for standard ground! My other water heater was builder grade and lasted 12 years! Go figure.

Purchased front load washer & dryer 2009 - have had issues with the washer ever since. The last episode has taken 3 visits from repairman - they cant figure out what the problem is - wont finish a cycle (any of them) and locks up. Cant open the door without turning it off and then back on. But the load wont spin dry - leaves clothes wet. Already had the harness replaced a couple of years ago and now they replaced the flywheel (it was warped) thinking that was the problem. Nope. Still wont work & the repair company said they cant figure it out & neither can Whirlpool. Im very angry after reading all of these posts about Whirlpool. Not a happy customer. But what can you do???

I purchased the Whirlpool Cabrio Washer thinking I was purchasing a quality product. Unfortunately it was one of the worst decision my wife and I have made. The bearings (lower) only last about 2 years. We purchased the extended warranty and the first time it was covered. The second set were not covered and now we will have to change them again. We will not ever purchase another Whirlpool product. I contacted them several times with no positive results. I still saved the last worn out bearings to show the CEO. The engineers do not have a very good idea to make the lower bearing last. Where I purchased the machine they told me after the first change that it would happen again and they were correct. If anyone needs to contact me about this product feel free. NEVER EVER BUY A WHIRLPOOL PRODUCT.

I have had a Whirlpool hot water tank now for about 7 years and all I have had out of it is trouble. It wasnt even a year old and I was putting a thermocouple in it a few months later I put another one in it. All I do is put thermocouples in it. I have saved the old ones. This heater is a piece of junk and I am the one whos paying the price for it. I just put a thermocouple in it on January 9, 2012 and I am putting another one in it on January 15, 2012. I have replaced all parts and it still does it. They are going to buy me a new one someday. I’m tired of this. This should not be happening. They are ripping people off. If the pilot light does not light, you have to replace the thermocouple in it.

Mine is a stacked unit...saves space and I just love the stooping over factor... BUT, its an energy saver and I always have to add about 5 gallons of water to it for it to cover even half a normal load...ugh!!!

I purchased this dishwasher washer (Model WDT710Paym3) in May 2013, quit cleaning. I have checked filter. I run this washer 1 or 2 times a week. Very disappointed in washer and the quality of the product. Dont think my next purchase will be a Whirlpool.

Purchased a Whirlpool refrigerator less than 3 years ago, the inside is cracking in several places. I read someone elses review and they said the same thing happened to their refrigerator. Customer service would not do anything to help me.

I waited years to buy this machine. I hate it!!! I agree with the other bad reviews. It destroys clothes. There is barely enough water in it to cover the bottom of the machine much less the laundry. Even deep water is a joke. It does not clean. I put it on the hottest water temp and I can put my hand in there and it is barely warm (it is not my hot water heater). My lightweight comforters come out all tacky and grungy in the middle. The softener dispenser (I use vinegar) dumps in the laundry (no it is not over full) (no I do not slam it shut). I can not let anything soak because the machine will drain after a few minutes and all my detergent, scent crystals etc. are all wasted. I feel like I have to take a survey and complete a questionnaire every time I do laundry. Can someone tell me how to put a comforter in there and leave that little middle eye open? They say the water saver is government regulated? Yup I need the government to do my laundry... I believe in saving water. I have a water saver toilet, shower, faucets. However I can not clean dirty jeans in a gallon of water. My clothes do not even get wet. How does whirlpool get away with advertising this machine can do king size comforter? The gentle cycle will tear apart anything I might put in there because there is no water and that blooming thing just twist and turns so it tears anything delicate. This is the 21st century. I think I should not have to babysit my washing machine. Why should I have to readjust everything in hopes it might be almost clean??? Place this here and that there, wipe the lint out before doing dark laundry. This machine belongs in the dark ages. It is so complicated yet it achieves nothing. A big rip off. I so tired of crying over this purchase. I hate this machine!!!

To start with, the ice maker drips non-stop. I have to check it several times a day to make sure its not puddling up and running my hardwood floor. Because of the continuous that, drip, freeze cycle, it creates an ice dam around the rubber boot between the ice maker and ice bin....which they located in the door where there is inadequate cold, so the cubes melt, making even more of a mess, causing it to be unable to dispense them because it is one big mass... oh and that creates an ice dam also, so on top of replacing a torn boot a couple times a year I have to chisel out the ice bucket and defrost it once a week.Want more? The ice tastes horrible. I have no idea why. It didnt in my last refrigerator. The Tap water tastes fine, I disconnected the line running in to the ice maker and tried the water from there and its fine. So somewhere in the ice maker, something is wrong. There is more. The unit is a year old and now inside the refrigerator it smells like gamey shrimp. I have no shrimp in the freezer, fridge, not have I. I dont store anything in poor sealing containers, nothing has spilled, I removed all drawers, panels, shelves and scrubbed the whole inside with bleach/water. I changed every filter, checked the drip pan (clean), and still half-rotten shrimp smell.My last refrigerator was an Amana from 1986. I bought it used in 93 and owned it until I got this Whirlpool. Never had a problem with it. I have had non-stop problems with this over-priced Whirlpool and I guarantee it is the LAST Whirlpool product I will ever own.

Really pretty fridge... wish it was just a little smaller. Also wish matching appliances had grey sides like the fridge does. So far it has been a winner.

Microwave Hood Combination...moisture sensor failed...potato caught on fire. Service company Whirlpool sent failed to show (Whirlpool selected a repair shop over 100 miles away). 2nd service company told me sensor failed and they would return with new part (ignoring the fact the white microwave was not gray and black) in a few days. If I wanted a new microwave without the dust and ash, I had to call Whirlpool. Whirlpool is ALWAYS experiencing a high volume of calls.Whirlpool states 7 - 14 days (unit on back order of course) for the microwave will arrive. 21 days later..no microwave. More high volume of calls... Whirpool state a repair center has received the microwave on July 31st and should have called me. Said repair center has no record of this transaction. Whirlpool reps claim to have records of my claim...but... they keep asking did we tell you it had been handled? I say read my file... Customer rep says my file is hard to understand (i.e. it is long). But they assure me they are empowered to help me. Maybe they should look up that word.Today...it is not Whirlpool customer service fault! No... It is being handled by a Product Replacement Specialist... Sadly they cannot provide me with any contact info for that Specialist. Empowered but not informed! Lesson: Whirlpool dont buy or if you do... and it catches on fire...just buy a new one... They make it impossible to get a replacement.

In 2010 we had to purchase a new hot water heater. Went to our local Lowes store to see what they offered. We decided to buy a Whirlpool energy smart electric water heater. It was large, 50 gallon. We have a large family and didnt like running out of hot water so we thought this would be great. Worked fine until yesterday when I kept smelling an odor like something melting. Could not figure out where the smell was coming from until this morning I got in the shower and had very little hot water. Went downstairs and seen the water heater was not working. Got the user guide out to see if we could pinpoint what was wrong. It said no power to control board. I checked the breaker box and found no problems. I got a flashlight to look at the control board and discovered it had overheated and melt the top of it. Have been on phone with Whirlpool nonstop with just a recording. The heater has a lifetime warranty so Im trying to get the replacement part for it that will cost me $115 plus shipping. I am really concerned that with this overheating it did not trip the breaker. Grateful it did not start a fire and worried if we repair it will this happen again and possibly not be as fortunate. I have seen on this site of another complaint with the same problem. Shocked there hasnt been a recall issued. Be careful!

I purchased a Whirlpool Cabrio washer (WTW6500WW1) on 9/11/09 for approximately $800. Now three years later, it needs a new rotor and stator costing $470 in parts and labor. I called Whirlpool and was told I could get no help with the cost of parts because of the age of the machine! A simple Google search of the F51 error code that I am getting will show you that these machines are $800 pieces of junk! I am not repairing this machine. I am going to run it until it dies and simply buy a new washer. You can bet your sweet self it will not be a Whirlpool! I can only hope to inform enough buyers about this to keep them from the same fate.

Purchased a Jenn-Air single wall oven model JJW2427WS after seeing it displayed in an appliance store. Oven was installed as directed. Upon viewing the panel, I discovered that it does not light up. You cannot read the function or numbers, never mind start and cancel without a flashlight. I have been a Jenn-Air customer for over 20 years. This is the first time I have been disappointed. Also, has this model been discontinued or recalled?I wrote to the CEO of Whirlpool and explained my problem. I was told that this is not a functional problem, but perhaps a design dissatisfaction. I cannot believe that there are other consumers who are not having difficulty using their appliance without additional lighting in their kitchens.

We purchased a Whirlpool washer model WTW7500 in November of 2017. I found the clothes were not getting clean and also noticed that even after a full wash some parts of the clothing or sheets had dry spots! I checked all connections and called for service. As soon as the serviceman saw the machine he said, “yes, that’s a problem with those machines”. They are low water/water saving as per some American regulation and that’s what happens... you’re going to have to live with it. He also suggested running an extra rinse and using “deep water” function. I did this and it made very little difference except now a wash cycle for bedding is 104 minutes! Also, still had a big dry spot on my sheets!When I called again to Whirlpool they scheduled another repairman for a second opinion, turned out to be the same person with the same answers... I called Whirlpool again and was informed that my washing machine is working as designed! I argued that a washing machine is designed to wash and clean clothes so this one does not do what it is designed for... I spoke to the supervisor, she was actually just rude, also said I not had 30 days to make a complaint and I was outside of that, when I asked to speak to her supervisor she said there was no one above her although she denied being the owner of Whirlpool! (That’s my little joke). Anyway wish someone had warned me prior to this purchase.

Bought a Whirlpool refrigerator December 2011, it is now 3 yrs. old, keeps shutting itself off. There is nothing under the troubleshooting area of the instructions for this. I called Whirlpool, they said I have to pay a tech to come here and troubleshoot. The warranty is 1 years, so after paying over 1k for an appliance, that gets you 1 year! I try to support American made, but no more Whirlpools here! I have all Whirlpool appliances, but Im guessing they wont last either. Very disappointed in the lack of customer service.

Three days ago my washer Whirlpool Caballero has made a loud jet noise sound while spinning. While researching for a repair Ive noticed many complaints about this type of washer. Is there any resources that will help me get this repaired?

We moved into our house about 5 years ago. We didnt know how old the heater was so 2 years after moving in, we replaced it with a Whirlpool Electric Water Heater. (2009) Last August, (2 1/2 years after installation) we found our carpet soaked in the room adjacent to the water heater and discovered it had been leaking into my finished basement for who knows how long. We contacted Whirlpool and they said they would replace the heater but I had to pay for the install because it was over a year. Mind you I had just paid 300 bucks 2 1/2 years before to put that one in. So I paid another 300 bucks to have a plumber come out and install this one. I had extensive damage to my basement, rug, walls with mildew and possible mold from the water. I went through my homeowners insurance and had almost $5000.00 worth of damage.So about a week ago my husband calls me downstairs and guess what, my brand new rug that I had replaced 11 months ago due to a leaking Whirlpool Water Heater was soaked again. This heater, 11 months old, leaked yet again!!! Needless to say Im beside myself, especially when I call Whirlpool and they will replace it, again, but who the hell wants to have damage to their finished basement every year??? When I called and asked them to pay for the damage this time because I cant possibly put another claim in with my insurance in less than a year for the same thing, they just say that they will have the labor charges dismissed as a courtesy. As a courtesy??? I said its been less than a year so they owe me the labor charges; she said no that it goes by the original warranty from 2009. What??? Thats utterly ridiculous and how is it possible that they can get away with this. That has to be against some state statue or law, to use the previous warranty on a defective product. So now Im left with about $2000.00 worth of damages this time to my brand new refinished basement all at the hands of Whirlpool. I had to get another one of their heaters because they wouldnt even give me the money for the heater so I could buy a different kind. I will NEVER buy a Whirlpool product again and Id advise to anyone who will listen to spend a little extra to avoid this hassle!

Whirlpool refrigerator - I purchased $6950.93 in Whirlpool products in one day last year at HH GREGG in Lexington, Ky. The refrigerator was purchased on that day September 18, 2012 and my kitchen wasnt going to be ready until December, but I wanted all items bought for measurements (specs) for the new kitchen designer. HH GREGG delivered to my garage October 26, 2012 because they couldnt hold any longer, but when we purchased that day they promised to hold till December when my kitchen would be finished. I have Proof from the kitchen installers the day they finished, December 28, 2012, was the day the appliances were installed. Well here I sit typing this letter on January 7, 2014 and my Whirlpool refrigerator is as of right now is in need of a compressor while losing approx $1000.00 in purchased food. In other words, approximately $900.00 in repair cost. Isnt Whirlpool a large enough company to stand behind its products when I paid $2599.00 for this refrigerator for at least one year from installation instead of purchase date? My fiancee has been trying to work out a solution with Whirlpool and the parts are on back order now. For at least two weeks we have been without a refrigerator and have two young children. Doesnt it show that the parts being on back order from Whirlpool, barely being a year old prove the defective product is being sold to the public daily? I plan on going further with this action due to the name Whirlpool all over my kitchen which disgusts me. Im going to write every columnist I can and do all I can with what little resources I have against this large company if no one helps us. This is absolutely an injustice against consumers...

Worst refrigerator Ive ever bought. Previous one still perfect shape. 22 years old. Freezes everything on top shelf. Motor making grrrr noises. Had repaired. Now bottom crisper drawers so cheap the plastic is breaking. Drawers wont slide. Now Deli tray lid snapped in half! STAY AWAY from this USA made product.

I purchased the Cabrio washer during the black Friday sale. The washer was a pretty slate gray. I loved the color and the fact it was a Whirlpool, which I thought meant quality. It was expensive but we were updating our appliances as our 10 year plus washer needed replacing. Big mistake. This washer is terrible. It keeps me stressed. There is not enough water to clean the clothes, my husbands white underwear is always dingy and dirty looking. The sheets are dirty and smells. I try putting bleach on whites before washing and the whites still come out with underarm stains. I tried all the recommendations to no avail. This machine is awful. This was a big financial mistake. As soon as I am able this machine is gone. Will go back to the agitator in the middle, and NOT a Whirlpool. I DO NOT recommend this machine unless you want something pretty because this is NOT a washing machine.

Updated on 02/13/2021: Company fails on customer service. My stove’s trim is rubbing off on my Whirlpool stove only 6 months old. No chemicals were ever used to clean the surface. This trim piece surrounds the controls and is not covered under warranty. An expensive cheaply made stove. Multiple attempts to have the piece replaced got nowhere. A letter sent to the head office was deferred back to customer service. Whirlpool has lost credibility and I will no longer buy their products.Original Review: So disappointed to find the paint finish coming off the trim on my 8 month old Whirlpool range. No harsh cleaning chemicals were used. Only mild dish soap and a microfiber towel. The trim, attached to the control panel on the front of the stove, is not actually stainless steel, but painted to look like stainless steel. Whirlpool warranty doesnt cover esthetics and refused to replace the trim, stating replacement would include the entire control panel and it is not covered under warranty. So be prepared to have your new expensive stove look old in a matter of months.

Friends and family dont you ever dare to buy a refrigerator from Whirlpool - Best Buy!!! They sold me a defect refrigerator and after 2 months begging to see a technician, they are telling me that they are going to fix it. Im so tired of them trying to fix it. Theyve been here 4 times with no luck. All my food is rotten and frozen. And its a new refrigerator. Gosh. As you can see, the water in the plastic cup that I left in my refrigerator are frozen which is not supposed to happen. I feel that Im dealing with nonsense. They dont care. They just took my money and thats it. Im left with a new defect refrigerator that doesnt work. Ridiculous.

The washer works well for the age of it. However, I would say it is not designed as nicely as some of the others I have seen. I found it performed okay doing the wash, but it didnt hold up as well I as I would have liked. Seems cheaply made. The machines plastic parts have stained from rust and seem tinny.

Whirlpool Duet pair. Like Whirlpool products and have had good experience with them. Have had the pair for 3 years. Like the way they wash and dry. Clothes do not take a beating. Only dislike is the vibration on the washer. I look for capacity and extra features such as: steam option and extra cycles. Now I also look for noise and vibration. Would definitely like to stay with Whirlpool. Definately cost is important, but for the sake of a few dollars more the options and the brand are something to be considered. Having a steam cycle and wrinkle cycle are important in any dryer.

Our over the range Whirlpool microwave door casing is disintegrating where the door handle screws to the door. Big chunk fell off today.

Cabrio (h2low system) top load washer ..USA 120 volt - A true piece of crap... Bought 2010... Even when it does work, 5% of any load will NOT spin out... The damn thing will refill its tub with rinse water to redistribute load so as to get a spin out. SOMETIME month ago, thing just dies... nothing. Technician comes out for two hours its the shift sensor. Replace for 200+ bucks... done. Works for three weeks, dies, tech is back. 4 hrs... its a bad processor board. Ordered 140$ rebuild, comes in mail few days later. Tech is back, replaces board. We have smoke!! Looks like a bad motor part. I could go on... but why. Never ever buy one of these sorry pieces of dreck. Absolutely the worst. Poor quality even when it works. Horrible wash quality. Never again Cabrio. Remember it.

This is my second water heater in three years. The problem is the thermocouple thermostat. Also, when I drain the water, it comes out of the heater black because of the corrosion in side. I spoke to people in the company, and they were nasty to me. This happened to my two heaters in 2 1/2 years. Please, do not buy a Whirlpool heater.

I love my Whirlpool. Were a family of 3 with a pet dog. Its handle one childs work uniforms and the others sports uniforms (yuck). And then theres my work/weekend clothes. Its very reliable and it gets the job done. We have no complaints.

My Whirlpool Cabrio washing machine. f1 keeps showing up on washer on. Shuts off again and again.

We contacted Whirlpool different times. I hate this piece of junk refrigerator. But Whirlpool never cared. My husband and I both did 20 years in the Navy active duty and reserves. 20 years each. Do you think we could have gotten some response other than a worthless sorry. To the Whirlpool CEO when you ever get some kind of compassion please us a real refrigerator that works and has some real room in it. I hate this thing and I hate not having an ice maker that works. A french doors refrigerator that really works would be good. Heres our address **. Please leave it on our front porch. Will be holding our breath. Thanks for your support.

If you want clean clothes dont buy this machine(Cabrio Washer)! First of all I find that my clothes have dry spot on them when I pull them out of the machine. Whirlpools response is that the machine spins at such a high rate that the cloth will actually seem dry. Doesnt make sense to me that a shirt that has another garment on top of it gets dry in an unexposed area. I have also been told to always use the high water setting. This helps but the clothes still are not clean. Also my dark slacks come out with residue lines on them - Whirlpools solution; never wash anything in cold water. In addition the machine is very noisy. It sounds like the water pipes are being kicked out of the wall. And forget about washing a king size comforter as advertised, a twin comforter doesnt get clean or even thoroughly wet and residue lines are left behind. Hate this machine! So glad I didnt buy the extended warranty since my attempts to have them stand behind this product have failed. I feel the money would be better used towards a different brand.

I completely forgot that I wrote a review on our Whirlpool hot water heater model FG1H5040T3 Nov in 2010 until I received an email telling me how many people read my post. Surprise, Surprise guess what we are having problems with again. You know how nice it is to have hot water anytime you need or want it. Well, not at my house. The hot water heater worked for about a year (Im probably being nice with the time here). Heres our problem now, once the water heats up the pilot goes out. It will not stay on. Ive noticed that if its full the pilot light will not come on, so we have to run some water to be able to light it. Well I called customer service, a waste of time. The guy told me that my heaters warranty expired last year and his suggestion is to go buy another heater. REALLY! All I wanted to do was order a part for it. He did send me an article with suggestion of things to check. Sorry, we already did everything in the article, another waste of time. It seems we are not the only ones (model #) with problems with Whirlpool. Whirlpool used to make good products but its not anymore. I will NEVER buy another Whirlpool product again.

I purchased my Cabrio washer and dryer 4 years ago, my dryer doesnt dry completely, I have to do 2 to 3 cycles to dry. My washer has an f51 code and I have problems unlocking the lid and it takes 2 to 3 hours to wash. This is ridiculous and it causing my electric bill to spike. Is there a recall on the Cabrio?

Aug 2012 bought washer, dryer, stove microwave/hood, dishwasher, fridge. $5000 later I had a service call on washer. Clothes stuck in washer for over 3 days to get fixed. Oven igniter has went out for the third time, 1 broke knob on stove. Dishwasher leaves dishes wet after cycle. Fridge handle fell off, crisper drawer rail broke off, and a door shelf is cracked. I am a veteran and unemployed. What happens when warranty expires and all my CRAP whirlpool breaks a week later? Also was told warranty doesnt cover the crisper drawer. They didnt tell me that when I purchased at Spencers on 75th ave and Bell road. Salesman at Spencers, Dan ** told us everything is covered. Im not a happy customer or VETERAN!

I got a Whirpool Cabrio Washer that I purchased in 2008. I am constantly getting ul code. If washer is leveled, it leaks water out the bottom rear of the washer. Its a piece of junk. I called Whirpool to no avail. Whirpool will not stand behind their product. They know they have a problem but wont do anything about it.

First, let me say we are so lucky and blessed to get home in time to prevent my home from burning. My Whirlpool range, model 4rf364pxk0, apparently decided to turn itself on (no one home) and grew hotter and hotter. It obviously burned out the thermostat because it was way hotter than cleaning mode. The key pad was melted and sagging inward the control panel warped, heat pouring from it. The racks and interior were glowing orange! My back splash tile blackened and cracked! The oven door locked! Oven hood ruined although it probably saved my cabinets! We hit the breaker! There was so much heat you could feel it on the outside of the exterior wall of the house 30 minutes later! The clean up to my kitchen has been horrible. Black soot and strange greasy film on everything and the stench has been toxic enough to give my husband a raw throat and myself a migraine! Oh and here is the ironic part - my husband was bringing me home from a hospital stay from high blood pressure! It would be almost comic if it wasnt so darn scary! Please, please address this issue before a more tragic story is posted! From looking at this site, it is obvious that there have been other incidence of your stoves turning themselves on and uncontrolled heat. I firmly believe another few minutes and our home would have been engulfed in flames. Now I will spend my weekend shopping for a new ceramic range, hood and tile!

This $1,000+ Whirlpool Cabrio washer high-efficiency machine should have lasted between 10-15 years, not 1, not 2, not 3, not 4, not 5! To expect less is to fall for the consumer cave in - where you just give up, give in and buy another. The Whirlpool tech just told the appliance repair guy that was here that the repair would involve a recirculating water pump and a bearing, and would cost $481 to repair. The appliance repairman said he is not in business to condemn appliances, but said he has a Kenmore top loader at his house. Simple, no electronics and less things to go wrong. Well after researching brands and reading reports, I thought I was buying a machine that would last at least as long as my second hand Maytag. Whirlpool has not heard the end of me. I have heard several other people say the same thing. Repair bills are huge and machines do not hold up. So much for buying quality. Now Im going to contact the MA attorney general for the states implied warranty, which means if you spend your money on any appliance, that appliance has an expected lifetime of service. A $1,000+ machine is not expected to fall apart after a few years.

I have purchased 2 Ikea/Whirlpool ovens in 2011 from Ikea in Canada. I have used the self clean feature on both ovens and both ovens quit completely and the doors stayed locked. This problem is discussed hundreds of times on the internet for Whirlpool, Ikea and Kitchen Aid ovens. Since they are all made by Whirlpool they are all very similar or exactly the same in some cases, as is the problem. I have discussed this with Ikea and they have said they didnt know about the problem but would help to get it fixed to my satisfaction. I have had Whirlpool authorized service repair both ovens but after trying the self clean feature again, same problem.During one of my conversations with an Ikea representative on the phone, she contacted Whirlpool and was told that if the oven was repaired 3 times and deemed by the service technician as unrepairable, Whirlpool would do a buyback. In other words according to Ikea, Whirlpool would take the oven and pay me what I paid for the oven. Well after contacting the authorized service dept (not Whirlpool itself) for the third time, they did some investigation with Whirlpool about the problem. To his and my amazement, Whirlpool has come up with a fix as of October 2013. The technician ordered the new kit and installed it in both ovens. I have since tried the self clean in one oven and this time it worked. For the information of others, Whirlpool has the kit and in it is an instruction sheet with pictures as to how to replace and install all the parts in the kit.I watched the installation, quite a process. From the instruction sheet there is a number on it. Here is the number - w10625529 rev. A 10/13. This is an instruction sheet for Ikea TOD (thermal overload device) service kit. I have looked at many of the service parts diagrams on the internet for many different current models of Ikea, Whirlpool and Kitchen Aid ovens and in most cases almost all the inside parts are the same or very very similar which leads me to the conclusion that this service kit may work in most of these ovens to correct the same problem, but I suggest checking with the appropriate service people before taking my word for it. My observation is that the kit moves the TOD off the top of the metal plate of the oven and onto a new bracket which the tech thought it was to get it further away from heat (this Im not sure of since Im not an expert). He also suggested that this kit may also be designed to allow more air flow around the oven.My only concern after having the self clean feature finally work is the heat produced inside the kitchen cabinet in which the oven is installed. Approximately an hour and a half after turning the self clean on, I felt the side of the cabinet between it and the fridge (open space), and at one area of the wood cabinet I could not hold my hand on the cabinet as it was too very hot. I will be checking the inside of the cabinet for signs of excess heat and if I see any evidence, I will again call the service people. Since the elements were not on when I checked this, I assume the self clean had finished the heat cycle and was in the process of cooling down. When I test the other oven, I will make sure the elements are still on as I can see them thru the glass door. When I checked the temperature of the outside wood cabinet using a laser thermometer, the outside wood registered 64 degrees C or 142 F approximately. Not sure what the inside temperature was as the oven was still in place. Hopefully I will not get a higher reading when the self clean is at its maximum temperature in the cleaning cycle. Will the oven create any problems in the future for the cabinet, I hope not but time will tell. For clarification, the cabinets were built by a kitchen cabinet company using the instruction sheet that came with the ovens. I hope some of this will be of help to some of the hundreds of people who have posted this very same problem on the internet. When you have paid for an appliance you wanted because of the features it came with, it should provide you with what you paid for and not constantly break down. Im lucky as they came with a 5-year warranty so it hasnt cost me anything yet and hopefully wont in the future. Good luck to all in getting this resolved for all of you.

Bought this new in Oct 2012. A week back stopped working. After a week found out it needs new compressor and will cost 1,096.00. Paid 2,100 for this new and now need to buy another fridge but not this make.

I purchased my Cabrio washer from Lowes 4 years ago. I noticed the smell and researched issues online. Suggested using the cleaners made for tubs. Im tired of the smell. I had repairman tear apart the washer. He told me they put water in the tub for balancing. Really... the tub is made of plastic. Will never buy anything Whirlpool again.

On October 29, 2009, we bought a new Whirlpool 30 gallon gas hot water heater to replace a Rheem we had for 20 years. We immediately had problems with the relief valve leaking, so we ran at the local hardware store and bought another valve. Next, we had trouble lighting it (husband was a plumber years ago) but a call to the hotline and we were in business. Now just over 3 years later, the pilot light started to cut off at will. Troubleshooting solved nothing. We called the hotline again and were given a part number, an authorization number and told to go back to Lowes for a replacement part. Figuring how our luck runs, I called first and was told there was no such part number. Trip saved. Now after reading all of these reviews, we have decided to cut our losses and buy another Rheem. You can find the Whirlpool hot water heater sitting beside our 2-year-old Kenmore HE washing machine (also made by Whirlpool) on the garbage pile. No more Whirlpool!

I purchased a Top load Whirlpool washing machine, replacing my old Whirlpool. I am so unhappy with this new one. I noticed that the water level are low...I had the tech here twice and they said that if here isnt any lights on the dash that the machine is working. I called the head tech, same answer. When I put the clothes in the washer I make sure that the clothes are evenly placed in the tub. The clothes comes out tangled and some not clean. Tonight I noticed that a pair of pant at the bottom of the load had white smudges/ I am so unhappy with this piece of junk/ I cant afford to buy another washer, so I am stuck with this.. I have tried all the different controls, still bad. I know the new machine are different than the old ones. I still believe that the water levels controls are not working. I have used my sister new washers and the clothes are not tangled and they are all clean.

In June 2010 my wife and I bought a new Whirlpool water heater (model ee2h50rd045v). As I have fairly extensive experience in both the electrical and plumbing areas (was head lab technician for an aquatics lab for 7 years and worked with maintenance on a farm for 10 years), I installed the unit myself. Two months later the motherboard fried. Whirlpool sent me a replacement and all was fine. Six months after this the motherboard fried and set the unit on fire. Luckily I was home and caught it before it got out of hand and the circuit breaker had tripped when this happened (the circuit breaker saved the house).After I had ripped the smoldering unit out of the garage I immediately called Whirlpools Customer Hotline and told them what happened. They said they would send me replacement parts. I reminded them that the motherboard had fried once before and that this time the unit had almost cost me the house. I also informed them that I have now worked for Lowes for 4 years and I am responsible for selling their product (in addition to other brands). The lady stated all they could do was send me new parts and the problem probably was with my circuit breaker. I informed her the circuit breaker was tripped so the problem was not there. She reiterated that all they could do was send new parts.The next day I started to remove the control panel and motherboard to find that the plastic had fused itself to the frame and insulation. I called the customer hotline and spoke to someone new and informed them about the new problem with the melted plastic. I was told that the melted plastic could be scrapped off safely and that since the problem was not the circuit breaker, the problem must have been how the wires had been spliced from my conduit into the water heater. The gentleman then proceeded to tell me how to do it in violation of Maryland code and told me he would have replacement parts sent to me. I checked with a certified electrician to make sure my wire splice had been done in accordance with code and he verified I was correct.I then had a Department Manager call Whirlpool. He was given the same runaround and told the parts would be mailed to me. He was also given the story about how the malfunction was due to the wire splice being too tight. He then asked to speak to the representatives supervisor and she told him she would not transfer him over to her supervisor. I have forgotten to mention that 2 months prior to this, a Whirlpool water heater (same model) had been returned to my Lowes store within the 30-day purchase window. The unit had caught fire. Since I had had problems with my unit motherboard at this point, I took that unit apart to see what had caused it. The problem started with the motherboard in that unit also. This is unacceptable. Whirlpool obviously has product quality issues.Sometimes bad units are put out. This happens with every brand. But when the same model has such a high failure rate and is known to catch fire, Whirlpools actions are inexcusable. Currently my refrigerator, oven, dishwasher and obviously the water heater are Whirlpools. I will not replace either of these units with a Whirlpool when they reach the end of their operational periods. Also in the future when customers ask me about Whirlpool appliances, I will be sure to tell them just how great Whirlpool is, how reliable they are, how great their customer service is and then quickly usher them over to Samsung, Frigidaire and Electrolux appliances. The department manager that had called Whirlpool for me has shared similar sentiments about future customer recommendations.

My Whirlpool Microwave is cracked all around the door handle and the frame with the insulation foam hanging out of the cracks. Dishwasher also having issues. Completely dissatisfied with Whirlpool Appliances. No longer under warranty.

We have a wtw5500xw2 washing machine we bought 03/2012. We can no longer use it. The machine would not spin or agitate so the clothes do not get clean or get the water out and after the cycle is done we have to wring them out after to be able to take them to the laundromat. So two repair companies and 3 months later we find out that it is the wiring harness that is the culprit. After a new motor and a shift actuator, we contacted Whirlpool only to be advised that the washing machine is out of warranty and that we are out of luck. If the company has a known issue about these wiring harness they should be looking into it and changing suppliers or offering to replace the wiring harness at a discount to its customers. I will not be buying a Whirlpool appliance ever again. I would recommend going with a Kenmore. I have had a Kenmore dryer that I got 19 yrs ago that we got used and only had to replace the heating element.

Light bulb went out in the freezer. Come to find it is a led cluster with a circuit board only cost $30 to $100. Engineer should be fired. What is the reason to take simple bulb and custom bastardize into an expensive hybrid. Greed.

Purchased Whirlpool front load washer 2010. Had it repaired 2013. Paid $599 for washer & $648 for the repair. Mailed copy of sales and repair to Whirlpool customer service. Received call from customer service and was told to have a nice day.

I have the Cabrio model WTW6400SW2. I have had it for 5 1/2 years and have been happy with it up until several months ago. The F1 would come up when the machine would lock and just start to fill. I could pause it and start it again, and it might do this 1 to 3 times. It would also do it on the rinse cycle. I have been using it because I did not want a repair bill right now. The machine was also starting to make noise when it was spinning. Well, I just happened to break my dryer yesterday so I thought I would get the washer fixed also. Well, the repairman said that the controller would cost $200 for the part, and then he said the pump roller and bearings were going. By the time you add on labor, he said, “You might want to buy a new one.” He told me that Whirlpool has completely changed the washer now because of all the problems with them. He told me to look it up on the computer, and maybe there would be a class action suit. After reading some of the reviews, I will not buy another Whirlpool again.

Free-standing electric range Model WFE524CLBS0 - When burners are OFF but oven is ON, stovetop becomes unbearably hot. Had a service call. Technician (who was rude and surly, but thats not Whirlpools fault) said design standard was 175 degrees. This is dangerously hot. Surface should never get that hot except when burners are on.

My Whirlpool dryer - Model# wgd49stbw, serial# ms2405113 went out on 1-29-16. Which I purchased from Lowes in August of 2015. Called the service company that I have my extended warranty with. They came out on 2-1-16. They did not have the part I needed in stock. It had to be ordered by the manufacturer. Sadly, I am still waiting and have been told it might come in on 3-29-16. Every time I call it gets pushed out another two weeks. This is really ridiculous. All the money I have spend at the laundromat I could have had a different source come out to fix. Which I still may do. I will never purchase another Whirlpool appliance again and certainly will NOT recommend. I am 65 years old and have a hard time dealing with the laundromat. If they get this part in by 3-29-16 it will have taken them two months. So sad.

The agitation is too loud. I called Whirlpool customer service and said I wanted to return the washing machine because it was so noisy. Whirlpool customer service agreed that it was noisy and said they would send a technician out. Whirlpool customer service never told me the technician they were sending would cost me 25% of the washing machine cost. The technician said this is normal all machines are this loud. Now I am out the cost of the washing machine plus the cost of the technician and all I have is a very noisy washing machine. Im a real satisfied customer. The machine was bought 12 days ago.

Whirlpool Cabrio - 6 Big Problems: I dont write bad reviews on anything but in this case, I feel I have to warn potential buyers. Ive owned this washer for more than 4 years. Here are the problems: 1) This washer TEARS HOLES in my towels; 2) It SHREDS some clothes; 3) Loads are UNBALANCED every time I use it, regardless of load type or size; 4) Very LOUD when running. My neighbors can hear it and they are 150 feet behind us. It sounds like someone is pounding on the walls of my house. BOOM! BOOM! BOOM! I havent seen it, but I believe it might actually be jumping off the floor; 5) Its NOT High Capacity as advertised. Sure, the drum is big, but you cant put much more than a tiny load in it. If you try a larger load, the clothes dont get cleaned; and 6) Whirlpool wont do a darn thing about it. They dont care about the buyer or their own reputation.Our family grew and I thought we needed a larger washer. I foolishly replaced a ten-year old, $300 standard top-loading GE washer that never had a problem, with this expensive **. The GE had a drum that was about 1/2 the size and it washed MORE clothes! The GE never damaged any clothes and it wasnt ridiculously loud like this one. I regret ever buying this expensive washer and I will never again buy a Whirlpool product.

Purchased a new Whirlpool built in microwave oven model WMH 310 17 AB-1 in July 1, 2013. As of February 2014, the glossy black finish on this microwave is dull where the finger push controls are and scratched up along the top of control panel and top front of door. We only use a wet cloth and towel or microfiber cloth to clean this microwave; nothing that would be abrasive so very disappointed in this product. It looks quite ugly for a new appliance. I did not anticipate how delicate the outside surface would be - never in over 30 years have I had this problem with another appliance, even stainless steel does not scratch like this.

We have had this range in our new home and in use since May, 2019. The first range had to be returned after its first use due to flaking of the interior walls; a problem the company acknowledged. Since then we have been so unhappy with its ability to maintain the oven temperature. Contrary to the instructions, we calibrated the oven temp and found that it would vary up to 20 degrees lower than the set temp. When set to 350, it would come up to that temp and then cut off until it fell to 330 when it would come back up to 350. That is a great differential noticeable in the time it takes to heat an item and which greatly affects baked goods. A similar lack of consistency in control in the range elements is apparent as well. Now those are major defects. Minor defects are: it is NOT a rapid preheat at all, both lights are on when the switch is engaged even though only one oven is in use, there is no clock function when the timer is in use and the range surface is difficult to clean as it streaks which is visible with the black finish.

I purchased a Whirlpool microwave in November 2011 from BestBuy.com. The microwaves handle is coming apart. Best Buy wont honor because I didnt purchase the Geek policy. One year warranty is still valid, but Whirlpool claims that a door handle falling apart is cosmetic. Serial number TR14430004, model number MH3205XVS-2.

I purchased all new Whirlpool appliances for my kitchen from Lowes about 5 years ago. The dishwasher was leaking water onto my hardwood floors after about a year. I figured out that the seal was pulling away on the lower left corner. I fixed that myself. It cleaned pretty well for about 3 years. Now its not cleaning at all. I took the lower spray arm off to try to clean it. Almost all of the holes are clogged with debris. (I clean the filter at least once a week.) I went ahead and ordered a new sprayer arm, maybe that will help.As for the rest of the appliances... After about 6 months, the freezer started filling up with water that then froze on the bottom and allowed water to pour onto the floor. The microwave handled broke after about a month. (They did send me a replacement handle.) The knobs on the stove are starting to peel. One of the knobs wont stay on, so I keep it in the drawer next to the stove. Overall, I am very disappointed in all of the appliances. This will be the last time I buy Whirlpool.

Our recently purchased stove top is an average appliance. The surface is easily scratched just from paper towels when cleaning. Today for no apparent reason the igniters all started firing and continued for a good hour....I would definitely investigate other brands before purchasing again.

We purchased a Whirlpool gas range for $600 in Aug 2015.. On May 2015 the range had an internal board failure (F2E0) and the panel does not control the oven or other features. We found out the part ranged from $350-$400!! Plus service installation! The one year warranty of course ran out but I think this is an outrage to sell an appliance that has such a poor electronic part. I have read a few similar complaints as this is also a Frigidaire model as well.

The new? improved model with NO center agitator is the worst - clothes tangle badly and the load becomes very unbalanced, wobbly and noisy. How I got talked into this model by a Sears salespeople was a big mistake!!!