DO NOT buy Whirlpool branded electric ovens. Whirlpool put out an update and it fried the control board of our electric built in oven. They refuse to fix it. They have kept us on hold for two hours and then tell us there is nothing they can do to fix it. We had an extended warranty that just “disappeared from their system.” They told us someone would call back us but no one has. This was an update we were told we had to run in order to use the associated APP. Our oven is only 2-years old. We now will need to pay for the repair ourselves. DO NOT BUY.

Whirlpools front load washers do not have easy access to the drain pump filter. The entire front of the machine including the door has to be taken off to access the filter. When putting washer back together the parts are cheap and screws break. Most companies that sell front load washers provide easy access to the drain pump filter. Buy one of those instead of a Whirlpool and you will save yourself a lot of time and hassle.

This washer & dryer is the extra large capacity combo. Uses less water but surprisingly the clothes come out clean as a whistle. Less detergent. Sin all cleans clothes excellent & saves you money. A win/win!

Thank you EPA for requiring water limits on manufactures of washing machines. As a result, I am forced to use the deep water and extra rinse functions to get clothes half way clean. So much for saving water! This Whirlpool Cabrio machine cost way too much for such lousy results. Additionally, I have to purchase a special product and clean my machine every month or two. Ridiculous!! I yearn for the old days when I could wash my clothes and they would actually come out clean.

The Gold Series Whirlpool dishwasher has some cool features for changing the configuration of the shelves, etc. After that its all downhill. Poor washing, worse drying. In the past 6 months Ive tried: less dishes, redistribute them differently every use, lower/raise upper shelf, use liquid detergent, powder packets, drying agent... nada. Absolutely NO remnant of food can be on the dishes. Of course I rinse everything well prior to loading washer; this one wants them CLEANED. I dont give a flying fig how loud a machine is as long as its doing its job. This one quietly does very little. AND the genius who designed that horrid cutlery basket needs a new job.The basket slides onto the inside of the door, making it difficult to reach into; it can sit on the outside of the lower tray but it falls off at the slightest disturbance. The baskets are narrow with hinged lids; the lids have small and medium slits so items are placed individually. If your cutlery is the right size! Ours is a little wide in the handle, they dont fit and must be placed into the opened, narrow baskets and butt up against each other. We are only 2 folks, I cook one meal a day and run the washer TWICE because bowls and pots take up the entire space, so I either wash the remainder by hand or keep the sink full of dirty pots and dishes. LOVELY. Bring back the old washer!!!

The Whirlpool Cabrio washer was extremely expensive to purchase but is rusting out and the circuit board is going out. We have had cheap washers last longer than this one and just to purchase the circuit board will be more expensive than another cheap washer. These boards go out right after the warranty goes out and I think that they are timed to go out. (The exact same thing happened with our dishwasher and after the board was replaced, it has lasted many years). Whirlpool should replace these for free since they do not last that long and are very expensive.

They sold me a washer that did not work. First load failed and the machine locked closed. Error E1 F9. Took 7 days for technicians to open the machine. The laundry was rancid by then. Needed a new drain pump motor, which was installed 37 days later. Whirlpool offered $150 for my loss of clothing. Ridiculous. Value $900, I asked for $500. Awful.

I earlier filed a complaint about the Whirlpool Gold microwave arcing within a minute of cooking frozen green beans and causing burn holes in the food. We contacted Whirlpool’s customer service and were told that the machine was no longer under warranty, but we could have it serviced, repaired and have an additional year of warranty for $259. We took a pass on that. Further trial and error along with research helped us come to the realization that the arcing was caused by the high mineral content of the green beans. Whirlpool did not tell us this, but we found the information provided by others. We no longer cook the particular brand of green beans which seem to cause this event. The microwave is no longer arcing. You would think Whirlpool might be aware of this.

This WP stove is so easy to use a child could do it. We use the built in timer all the time, not only when using the oven but timing items on the top of stove as well. Speaking of the oven, the self clean not only cleans but it leaves the oven sparkling. We love it.

Our home is only 8 years old. Our neighbors and double ovens have all gone out! I mean it just quit working and the parts and repairs are crazy expensive! We have already spent $400 on a control board and now we need a control panel which is another $300! Its ridiculous spending $700 on repair of an oven that should have lasted a lot longer! Another thing is that our ovens are white and now the panels only come in black! I will never ever buy Whirlpool appliances again and I am spreading the word to everyone I know!

This is our 3rd repair in 13 months and now my 4 and 1/2 year old son and I both suffered bacterial food poisoning on this 3rd round. It has been a complete nightmare. Then we found out until last month, they were completely replacing the entire refrigerator. Then they stopped that and are just replacing the parts again. Now there is a back order of the parts and not to put any food in there or we will get sick again. The repair itself will take 4 hours whenever they get the parts in and another 1/2 day to take off work. We are building a house and have bought the entire gold series line of crap that is sitting in boxes in our garage. NOW WHAT WHIRLPOOL?

We bought a Whirlpool Cabrio in April 2012 and in July 2012, it started giving problems. It wouldnt start. It started humming. We heard money-like jingling noises. It stopped spinning and rinsing clothes. I called for service. No luck with that. So in order to wash, I had to drag the washer to the back door (which ripped up my new floors) hang hose outside for it to finish the load. Well a few months later, that didnt work so the assistant where it was purchased told us to cut the pipe down in the wall. Now we have a big hole in the wall. My floors are ruined and we are out getting another washer. This one is not even a year old. That was a $750 loss.

My refrigerator is a side by side and its freezer compartment is small (width). Whirlpool is always my brand of choice for household appliances. I personally would not choose the side by side design again but I would choose Whirlpool.

We purchased a new bottom freezer Whirlpool refrigerator 4 years ago. For the past year we have had problems with the freezer frosting up. An appliance repairman told us the seal needed replacing. This was done with no success. He states there is nothing he can do for it. The refrigerator runs all the time and the freezer is unusable.

We thought we were going to love it. It has two bottom freezers so the capacity is fabulous, but the ice maker location subtracts shelf space. Love the French doors, but we can never find anything quickly. The biggest issue is the popping noises it makes that are sleep stealing in the night.

Whirlpool Washing Machine WTW4800XQ4 - This is an expensive piece of garbage. My clothes come out with lint still on them. They do not smell clean and in fact, I wonder if they even are. My blankets come out heavy and soaking wet, so much so that I have to repeat a rinse and drain cycle before I can place into the dryer. The machine is always off balance and its so loud that my almost deaf grandmother who cant hear a thing wants to know what that noise is when shes halfway across the house each time Im doing laundry. Ive called Whirlpool and they have sent a tech out who insisted it was I who did not know how to load a washer and that was causing all of the problems. I found this interesting since I am 37 and never encountered difficulty with a washing machine before. Our visit concluded when he insisted it was user error and went on his way. The next day, the washer was not even cycling, and I phoned whirlpool back. This time, there was a computer problem and there was no arguing about it. The technician came back out reset the internal computer. The machine seemed to run more quietly for about a week, but went right back to its old loud self. The only improvement Ive noted since then is it does not move across the floor now while washing. I wish I never bought this thing and would certainly never recommend it.

I bought a top of the line Whirlpool front load washing machine (WFW97HEDW0) and drier with my new construction house. After a few months the washing machine began making a loud, banging noise during the spin cycle. Then about a month before the 1 year was up the unit broke and dumped all the water in the drum into the catch pan it was installed on. I called for service and someone showed up in about 3 days. The tech opened the unit and found that the plastic/composite drum the spin unit was contained in split in half all the way around. The tech exclaimed he had never come across this issue and would report in what he found but that he did not have the part and it would most likely be a whole new unit but that its up to whirlpool to make the call. I would find out that whirlpool had decided that the unit can be fixed and they have ordered the part and would call to schedule the repair.A week went by, with no word. I called warranty service company, Via Services, and they tell me that the part is on back order and that it would be two more weeks before it would come in. Now were looking at being without a washing machine for a month. I communicate this to the builder and they somehow get whirlpool to come out a week earlier than they said they could. The day came for the repair and two techs take nearly 8 hours to repair the unit (how is this efficient?).After the repair the unit ran with an odd noise that I attributed to the way it was stacked. A month goes by and two days after the 30 day repair warranty I go to do a load of laundry and the unit turns on but wont run. I called for warranty work because it was clearly not repaired sufficiently. I schedule a tech visit which is for a week after. The day come and the tech says he cant fix the unit without charging me for the repair because it is now out of warranty and if I have the extended warranty then I need to set that up with the extended warranty group. I send him away because I had just paid for the extended warranty. I called whirlpool for the extended warranty work and they schedule a repair contractor to come out in 3 days.The repair contractor calls me directly to confirm if the unit is side by side or stacked. I let them know that the units are stacked and they say they cant repair it because its a two tech job and they dont have enough techs. They send me back to talk to whirlpool. Whirlpool then notifies me that because its stacked I have to either unstack it myself or hire someone to unstack it for me. Well, I cant unstack the unit by myself and why should I have to pay someone to unstack it when thats what the unit was designed for? At this point I am going back and forth with the builder to get a refund so I can replace the unit. I will forever steer clear of any whirlpool or subsidiary products. The products are flimsy and the service is no better.

Not enough water to separate/agitate the clothes, so theyre as dirty coming out as going in. We bought an older washer that takes on more water and, presto....clean. We bought new Whirlpool for over $500.00 & sold it for $150.00.

Whirlpool Refrigerator Freezer WRF560SEYB01. Purchased the Whirlpool Refrigerator Freezer in 2012 at Sears. Ran okay for 2 years. Bottom freezer door came off the track. Called Sears. Sent out repairman for $200 to replace the door. He did not check the ice buildup on back of freezer. Next problem, severe ice buildup, loud noise. Used hair dryer to melt ice and took the blower fan out of freezer. Solid ice on all the blowing fans and found a chunk of solid ice. Freezer no longer made the noise until the ice built up again. Now, it continues to build up and we have to use the hair dryer every two weeks. A refrigerator should last at least 10 years. This model doesnt even warrant a rating of any kind.

Bought expensive fridge 2009. Now (2015) random very loud rat-tat-tat sounds lasting 5-10 seconds. Very loud. Paid for repairman to evaluate. He said it was probably compressor spring and other springs would probably soon break and would shut down fridge. Said it is very expensive to repair and it would be best to dump the fridge and buy a new one. I called the 800 number located inside the fridge. Jacob at Whirlpool listened to my story and said, Yep, it sounds like the compressor spring and the other springs will likely break. He said he can make me a one-time offer of a full repair of the compressor for only $359.65. We pay Whirlpool and they will have a local guy here come and fix it. We paid by visa.And, via email we get a document that shows we just bought a service contract. This is a surprise to us as we were told were paying to have the compressor repaired. In a few days, a call comes from local repair shop. Guy says, he will come out and check out the noise and see if he can repair our unit. We tell him the noise is intermittent and we cant predict when the noise will occur. We also tell him Jacob from Whirlpool said it was the compressor and that we paid to have it repaired. He says it doesnt sound like it is the compressor and that he cant diagnose the problem if he cant hear the noise. We tell Maytag/Whirlpool via phone we are faxing formal request for refund of our $359.65. Lady from Whirlpool says we, should get a refund in 4-6 weeks. Well, we will see.We are very disappointed in the the short life of our very expensive fridge and we are disgusted with the false and misleading comments made by Jacob of Whirlpool. He told us we were paying for the repair of our compressor and instead we get a stupid service contract. We are in the process of buying a new fridge. And no... It will NOT be a Maytag/Whirlpool!

My Whirlpool Cabrio Washer is only 4 years old. I have had balancing & spin issues since day one. Thought it was just me. Constantly had to drain and spin after rebalancing. Now 10 days ago it cost me $250 to have it fixed. The aqcuator (?) Went. It wouldnt spin out. Now 10 days later it stops again. The appliance guy reads code. F7E7. He tells me the bearings are no good. Will cost another $400 and they need some special tool to fix it. IM DONE. My last set was 15 years old. The price is ridiculous and quality not worth what this triple capacity set cost.

Recently bought and had a Whirlpool Cabrio Washer (from Orvilles appliances) installed in my home. The very first day I hated it. Worst purchase I have ever made. I spent over an hour picking hair out of my clothes, and hair was also stuck in the crevices of the drum. This is the very worst machine and company I ever had to deal with. They told me, Too bad. Since there was no mechanical problem there is nothing they will do. I will never deal with either of these companies again. I cant wait to see what the hair build up will do to the machine itself, Had it less than a week.

I bought my washer duet (model WFW94HEXL2) in Sept. 2011. Today is Jan. 2013 and it has been a year and four months since I got the washer. I decided not to buy an extended warranty. Its only my husband and I at the house so we take really good care of our appliances. The washer stopped working and is giving me a code F-6/E3/E1. Basically, I need to change the central control unit ($350), door latch ($120) and labor ($180), for a total of $656.13. Really? I paid $1,105.00 for the washer. Im really upset. I called Whirlpool and they said the item is out the warranty and there is nothing they can do. I am really upset.

We purchased this machine new less than 6 months ago. We found that it is not cleaning our jeans. We cant even work cattle and get our jeans clean. I called Sears and Whirlpool and told them it does not clean our jeans. They said it was under warranty and that they would come out to see if it was working properly. Well they said it was and then sent us a bill for $77. They said Customer Instruct was not covered under warranty. I already read the instructions and I knew how to operate this machine. The technician said this is not the first time he has had this type of complaint. Anyway I am VERY dissatisfied with this washing machine and I want Sears and Whirlpool to take it back and give me a better machine. I want one that can get clothes clean. If you are satisfied with dirty clothes then I guess you will like this machine.

The washing machine does not wash the clothes. It does not clean the clothes and goes off balance all the time. I have had it 9 months and waited to write the review to make sure I using it properly and giving it a chance but to no avail. It is awful. It leaves white lines on the dark clothes and does not take makeup stains out of the white towels. Those are just a few examples. The clothes have to be washed sometimes twice to feel they are clean enough. So it is not cost effective and uses more water which is counter productive to the HE.

Whirlpool Refrigerator WRS526SIAH00. Well we have always had a lot of trust in Whirlpool appliances over the years. Just about everything we have is Whirlpool brand including water heater. We remodeled our kitchen and bought a new refrigerator in July 2013 (just for the color/look change). We have had nothing but problems from day one with the water/ice dispenser water may or may not work. Now (AUG 2015) the refrigerator side started freezing our food, milk and tea gallon jugs frozen solid. Went down a self fix list on an appliance parts website using our fridge symptoms, said it was probably the bimetal defrost thermostat. Replaced that part. It didnt fix it.So I did my own troubleshooting and found the cold air was continuing to push from freezer into fridge area, found this cheaply made plastic damper broke and stuck open. Now that part will cost another $50+. Whirlpool knows about these cheaply made parts they have put in these appliances. You cant even get to this part without taking things apart. This is a cheap manufacturers plastic part and Whirlpool knows it. Its not the consumers fault. It was a joke when we received an extended warranty offer from Whirlpool for just $208 per year or $626 for 5 years - I wouldnt spend another dime with Whirlpool. The price is high because they know how many parts are breaking on these units. You shouldnt have any repairs for 10 years on a refrigerator. We are stuck with a lot of Whirlpool products now, but we are done with this brand. Dont waste your money.

When I grew up, my mom and dad had a Whirlpool dishwasher and it was the ONLY dishwasher we EVER had. The SAME one, for over 20 years! So, with confidence, I purchased a mid-range unit. (over $600 2015). By 2016, ONE year later, I was already buying replacement parts because the top rack was falling apart and the bottom spinner broke as well. The parts were extremely expensive and hard to find. Now, a mere 4 years later, you cannot find ANY parts for this machine and there are so many issues with the unit. It is no longer functioning. When it did work it ran for 4 HOURS!! Even then, the dishes are filthy. I am so upset by whirlpool. I want a full refund from the company for treating their loyal customer so badly.

I completely forgot that I wrote a review on our Whirlpool hot water heater model FG1H5040T3 Nov in 2010 until I received an email telling me how many people read my post. Surprise, Surprise guess what we are having problems with again. You know how nice it is to have hot water anytime you need or want it. Well, not at my house. The hot water heater worked for about a year (Im probably being nice with the time here). Heres our problem now, once the water heats up the pilot goes out. It will not stay on. Ive noticed that if its full the pilot light will not come on, so we have to run some water to be able to light it. Well I called customer service, a waste of time. The guy told me that my heaters warranty expired last year and his suggestion is to go buy another heater. REALLY! All I wanted to do was order a part for it. He did send me an article with suggestion of things to check. Sorry, we already did everything in the article, another waste of time. It seems we are not the only ones (model #) with problems with Whirlpool. Whirlpool used to make good products but its not anymore. I will NEVER buy another Whirlpool product again.

Bought Whirlpool electric range in Dec. 2005..expensive..so the warranty expired a few months ago. The electronic keypad that controls the oven and lights doesnt work. The repairs will be $408 plus tax which is obscene, and are guaranteed only for 90 days.This after only 5 years of minimal use...just me using it.I will never buy whirlpool again.

My Whirlpool dryer - Model# wgd49stbw, serial# ms2405113 went out on 1-29-16. Which I purchased from Lowes in August of 2015. Called the service company that I have my extended warranty with. They came out on 2-1-16. They did not have the part I needed in stock. It had to be ordered by the manufacturer. Sadly, I am still waiting and have been told it might come in on 3-29-16. Every time I call it gets pushed out another two weeks. This is really ridiculous. All the money I have spend at the laundromat I could have had a different source come out to fix. Which I still may do. I will never purchase another Whirlpool appliance again and certainly will NOT recommend. I am 65 years old and have a hard time dealing with the laundromat. If they get this part in by 3-29-16 it will have taken them two months. So sad.

Glad to know we are not alone in our disappointment with our Whirlpool French door refrigerator, but I am wondering what and when Whirlpool is going to do something about this. What a blow to their reputation. Goes to show things are not made as they used to be. We purchased our Whirlpool Gold French door (bottom freezer) in August of 2010. Here we are October 2012 and this is the third time it has stopped working. We have lost food, weekends waiting for repair people and cleaning up messes, and money. Same problem as others are reporting - the electronic board and controls. I just spent my Friday evening on the phone with Whirlpool, first explaining the problem to no result then waiting for a manager to call me back. Who (guess what?) never called. I finally called them and got the same script as the rest of you. It is outside the manufacturer warranty. Really, that is what you are giving me? Plus they will only look at it if we have a Whirlpool repair person come see it. When can they come? In 4 days! Ha, not likely. I am not giving this company another cent. We spent almost $2,000 on this fridge, all we are getting is 2, 3, 5 years? What a shame. We are fortunate enough to have had some space in our garage beer fridge for what I can save of the food. Our 7 years old, $300 Moffat fridge has been working like a charm. We will never again fall for the looks of a Whirlpool, let alone purchase another one of their appliances.

I like the Whirlpool oven ranges because it is easy to operate, easy to clean and like the features and functions. I have had no issues with the stove and I have had it for four years already. So far still working good.

We bought a new house and the choice given to us was Whirlpool. After the first year in the house we had a $300 repair. The control panel inside the fridge went. Pretty poor performance.

We purchased all our appliances from Flecks - there were to be rebates. Also never received them. We have had our oven for 2 years - when I set the oven on 350 it will go up to 400 degrees & the temperature on the front of the stove is 350 then it will drop down to as low as 250 & the temperature will still say its still 350. I called the company - did will do nothing. Will cost me as much to fix it as to get a new one. This a Whirlpool oven.

My complaint no. ** date 11/07/2014 till date 06/08/2014. Its noted solved by services department after 100 calls by me. They Reply no parts available from company so if you buy washing machine, be careful about Whirlpool washing machine.

In less than a year my gas range required a new knob because it froze in place. They covered that but not the 4 new knobs since. I must clarify, its not actually the knobs but the thing underneath that my husband has had to replace ever since to our expense and time. Also in less than a year the paint under the knobs totally fell off. We contacted them about that and the reply was paint wasnt covered under warranty. Obviously they used heat resistant paint on the range top because that is perfect condition even with the constant cleaning, but the angled front where the knobs are I had to sand and repaint, not a good look for the stove. They really couldnt have just used the heat resistant paint for 2 1/2 farther? Just horrible quality and worse service. I used to be devoted to Whirlpool but since buying my new refrigerator - Samsung 100 percent from now on!

In May of 2010, my husband and I purchased a Cabrio washing machine. By the fall of 2010, I had put in a call to Whirlpool due to the washing machine chewing holes into clothing and not cleaning the clothes. Some of the clothes would come out of the washing machine with dry spots on them. Whirlpool sent out two different servicemen and even though one of them replaced the agitator we have still had problems with it. One of the servicemen even tried to tell me it wasnt the machine but it was my detergent (I use HE Purex dye free). I was told by a service rep at Whirlpool that there was nothing more they could do and I would just have to deal with it. I understand that products go faulty but with good customer service these issues could be resolved. Whirlpool obviously has little regard for their customers. I have contacted the Better Business Bureau. Hopefully they can get results.

I purchased 3 appliances (microwave, stove, and dishwasher) on 10/22/10 when they were on sale at Sears for my soon to be remodeled kitchen. I did not have them delivered until 11/15/10 until contractor was getting ready for them. They still were not installed immediately. On 11/17/11, in the evening, the microwave stopped working. I called Whirlpool on 11/18/11 for service. Whirlpool will not honor the 1-year warranty since technically I bought them in October 2010 but did not even have them installed in my home for use until the end of November or beginning of December 2010. Common sense tells me the company should honor the warranty. Are products being made today to last less than a year before they go bad? To pay for a service call and parts, I can buy a new microwave (but you can bet it wont be Whirlpool).

I purchased my refrigerator four years ago from Lowes. From the second year ice would form in the bottom of the freezer weekly. This past week it stopped working totally. I had to call a repairman. He advised me the parts he had to replace were outdated and Whirlpool had made changes to the my refrigerator model two years ago. No recall. Just cheap parts that caused the refrigerator to not defrost. $400 later all is well and I am broke. I wrote to Whirlpool and their response was, Oh well, there was never a recall so youre SOL.

We purchased a new home in July of 2011 and we paid extra for the upgraded appliance package, which included a Whirlpool Microwave/Convection Hood Combination unit. We have Model # GH7208XRS3. We use the microwave a few times a week and only used the home 6 months each year during 2012, 2013 and 2014, for a total of approximately 18 months. From the very beginning, we had trouble with the microwave control panel turning itself on and the electronics going through various timing and programming functions independent of any human operator.During the combined two-year warranty period from July 2011 July 2013 (the Manufacturers Warranty lasted one year and the Developers extended Warranty lasted an additional year) we had 5 service calls on the same issue. The Authorized Repair Center repairman called the Whirlpool Tech Line while he was in our home and was told that there was a flaw in the design of this model. They replaced the door and then when it acted up again, they replaced the control panel. In Nov. 2012, after the repairman told us the door needed to be replaced again, we asked for a new appliance since we had the same issue repeatedly and they had already tried to fix it by replacing the door and it was still under warranty. We were told that Whirlpool would not replace the appliance until they had tried to fix it three times and we needed to get a new door again. We were told that because it was the same issue repeatedly, we would get a replacement if it still went bad after the warranty was up. So we had the door replaced again, which did not fix the problem.In late 2014, we again had the same issue with the control panel and made a call to Whirlpools Customer Experience Center. At that time, we were told that the warranty was no longer in effect and Whirlpool would do nothing to fix the issue. Even though it was the same issue that they had attempted and failed to fix while under warranty, the company would no longer stand behind the promise of customer satisfaction and told us they will not replace a 3-year-old microwave. When I asked the Customer Service Rep to speak to a Manager to escalate the issue, I was transferred to the Tennessee Office. When I got the same repeated run-around from the Supervisor, Melissa, I asked that Customer Service Supervisor to let me speak to a Manager and she told me she could not give me the name of anyone else to speak with and hung up on me.I am writing to you to express my extreme disappointment in Whirlpool and the products reliability, the way the company has handled fixing the problem and especially in the conduct of the Customer Service department. Whirlpool gave us nothing but a run-around for the years the warranty was in effect, knowing that this model has a design flaw and trying to do band-aid fixes until the warranty ran out. We were told that our only option now is to pay to have the same problem fixed a fourth time or purchase a new microwave.Whirlpool has trained their Customer Service people to be polite but ineffective and obstructionist on the phone and then hang up on the customer when they cannot resolve the customers issue. I believe that Whirlpool should be committed to customer satisfaction and making sure that their products work as intended and fix the problem that was reported while under warranty, even if it no longer in warranty. Whirlpool should be as disappointed as I am that after three attempts the problem is still not fixed and should be committed to customer satisfaction enough to replace the appliance after three failed attempts.

Worst customer service I have ever seen. I have been waiting on a part for my dishwasher since before Thanksgiving. I have sat on hold for 2 or more hours. They cannot connect you to a supervisor, you just continue to wait on hold. They cannot give an eta for the part that has supposedly been in production since before Thanksgiving. I get told one thing, then when I call back for an update 2 weeks later that person has no idea what Im talking about. I will tell you one thing, if you do not want a headache, I suggest you buy another product!! I can guarantee, I will let everyone I know and never purchase Whirlpool again if this is not resolved this week! After doing my research, this part should be recalled. It is a big issue with this very expensive dishwasher.

Whirlpool has been a trusted name for us for many years. The large tub has cut my wash load in half. Large towels to delicates have never been a problem. My washer is going on 12 yrs old and runs like a champ.

I bought Whirlpool gas water heater on July 2009. It keeps going out. It is not working. I found out you cant even get parts for fixing it. The dealers told me its junk. I was told to buy a new one. Then, I found out its been in class action lawsuit. How did I get to buy it after it was recalled? I dont know what to do.

We purchased a high end KitchenAid Refrigerator Dec 2018. Rust developed on water dispenser door in less than year. They would not honor warranty. Since March we have had ongoing cooling problems with 5 service calls and 4 different fixes and unit still doesnt work. Local authorized service company, Fields, in Jacksonville FL is incompetent. Whirlpool doesnt return calls. The products value is not consistent with the high cost. Here are the gory details. Ref: Setzers, Jacksonville FL (sold unit). Fields Jacksonville FL (factory authorized service company).Less than 1 year in, it began to rust. We called for a Warranty check. Fields Appliance (their factory authorized service company) came out and agreed all 5 doors needed to be replaced. A month rocked on, finally we called to find out where the doors were, and were told Whirlpool (Makers of Kitchenaid) denied the claim. Citing that we lived near the coast! Well, our other appliances arent rusting and the refrigerator doesnt sit outside! They sent us a 6 oz bottle of rust cleaner. A few months later, this refrigerator stops cooling! This was in March, 3 months out of 1 yr warranty. The refrigerant system is warranted for 5 yrs. This was also right at the beginning of Covid 19 shutdown. Fields could not give us a appointment, due to shutdowns. So, I called a local company to fix it out of pocket. He discovered a leak in the coolant lines, fixed the leak and replaced the coolant ($453.61 on 4/9/20). Great, it works! About 3 weeks later, it stops cooling again. Called local service repairman out once more to see whats going on. He replaces a thermal bi metal sensor and well ahh! It works again ($100 on 4/28/2020).About 3 weeks after that, it stops working again! We are thinking by now, its a problem for Setzers, Whirlpool, and Fields. We call the local service repairman out to confirm and he states that the evaporator fan motor will need to be replaced, and that part replaces all sensors as well ($59.99 5/28/2020 service call). We call Setzers and schedule an appointment with Fields. First appointment we could get was 6/16/2020. Guy comes out, and cited a factory defect, per a technical bulletin he had, and relocated a sensor. Simple as that, he assured us it was fixed! Even though I pointed out it felt no cooler when he packed his things to leave. It did nothing! In the background Setzers (when they would call back) were supposedly working with Whirlpool to help fix the problem! Whirlpools reply was that since our repairman was not factory authorized, it completely voided our warranty! Explaining we had no choice, since Fields wouldnt come out and by now we are without a working refrigerator for 3 months, they could care less! Feeling totally frustrated, we call Fields again! On 6/19/2020, they send out another repairman. This guy came in, opened up the back, and immediately stated the refrigerant was overfilled. Didnt do any diagnostics, just told us that we were **, and walked away, without even putting the refrigerator back in place! Neither Fields rep hooked up a diagnostic tool to confirm any real issue, I guess they just knew! Total incompetence! So... As of now we have paid the local repairman ($448.33 on 6/26/2020) to order the evaporation fan motor and install it this coming Monday (7/20/2020). Total amount out of pocket at this point, $1053.90. It took that long to get here! Wish us luck! Setzers wiped their hands clean of the issue and told us to call Whirlpool. We did have not ever received callback.

I have the Cabrio model WTW6400SW2. I have had it for 5 1/2 years and have been happy with it up until several months ago. The F1 would come up when the machine would lock and just start to fill. I could pause it and start it again, and it might do this 1 to 3 times. It would also do it on the rinse cycle. I have been using it because I did not want a repair bill right now. The machine was also starting to make noise when it was spinning. Well, I just happened to break my dryer yesterday so I thought I would get the washer fixed also. Well, the repairman said that the controller would cost $200 for the part, and then he said the pump roller and bearings were going. By the time you add on labor, he said, “You might want to buy a new one.” He told me that Whirlpool has completely changed the washer now because of all the problems with them. He told me to look it up on the computer, and maybe there would be a class action suit. After reading some of the reviews, I will not buy another Whirlpool again.

Worst appliance of any kind that I have ever used. Has only on/off button, in effect. Wastes water. There is no option to change anything once cycle has begun. No soaking. Occasionally, the machine simply decides to stop and drain itself so that you can start all over again!! No idea how long cycle is. Nearly done? No idea. No matter what temp or how much detergent or how much water, the clothes are not clean. The lid locks and so there is no way to know whats going on. I suspect there is very little water during rinse cycle. All of the whirlpool appliances are similarly horrible. Washer is the WORST. Shame on you Made in America.

Our Samsung self cleaning oven burned out. The wires in the back were burnt and brittle and its a miracle our house did not burn down. While shopping we were told the new self cleaners were so much better, not the high heat, odor etc. This Whirlpool stove does not self clean, its a joke. I have scrubbed for hours on it. It does not get any kind of grease etc. off. You need to scrub and work hours. It may take a small spill off the bottom of the stove but thats it. There is no way to get all the grease splatters off the walls etc. I hate this stove and see there was a class action law suit on it. If I would have known then what I know how it would have gone back as soon as it arrived. I plan to go looking for another stove and it will not be a Whirlpool Aqualift self cleaning.

This is a Whirlpool dishwasher that has been functioning for 25 years! Much better than any of my 4 newer appliances. It has never had a problem. It is easy to load and unload. The dishes are always clean. Dread getting a new one.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

Cabrio washer - This was a huge disappointment, clothes not clean, sometimes still dry in middle even with small loads! Have had washer just over a year, second time it has quit working! This time it wont even give a code to why it wont spin out! Living on a budget, I cant afford such a shoddy product! Never again will I buy any product associated with whirlpool!

I purchased a Whirlpool washer 7 months ago, and a month ago, it broke. I have been without my washer for 1 month, and it has been repaired 4 times in that month. It is still not working. All I get is that, its under warranty, and there isnt anything they can do, but to keep trying to fix it. I have been having to take my clothes to a laundromat, and pay to have them washed. I have asked for them to deem it defective, but they refuse.

Whirlpool built in Electric oven Self Cleaning Model # GBS307. Dont Clean your oven! Everytime you clean the oven, the thermal fuse switch will burn up on you and will cost approximately $150.00 to fix. Dont use the self cleaning on this oven!

I purchased a high dollar built in side by side fridge with custom panels in 4/2005 and had my first service call in 5/2005. Since 2005 we have had 11 service call mostly for defrost failures and over temp. readings. From 2011-11/20/2013 we were issue free then the fridge over temp alarm sounded and we could not hear the fan motor. We had the certified tech come out to evaluate and found that the main control board needed to be replaced. Kitchen Aid/Whirlpool no longer make this item and forwarded us to Core Centric solutions to have a new one built. After speaking with the certified tech who had been out to service our fridge 11 times he informed us that these boards in his experience have never lasted more than a year. We spoke with a customer service rep a Kitchen Aid and asked about a prorated discount on a new built in fridge and she said it seemed reasonable but after checking for authorization informed me I needed to have the board rebuilt at my own cost and that even though this typically takes about 4 weeks to build the fact that our family would be without a fridge is not Kitchen Aids problem. 6/20/2005-over temp/not cooling call (replaced defrost thermostat) 9/2005-over temp/freezer iced over in bottom (freezer decided and drain unclogged) 10/05-over temp/not cooling (replaced fan motor) 9/06-over temp/freezer iced over in bottom (drain line decided, kitchen aid had no advice on how to fix) 10/06-over temp/not cooling, ice build up (whirlpool recommended replace heat kit and bimetal) 11/7-over temp and ice buildup in freezer with leakage (adj to drain pump and defrost drain basin made) 11/07- over temp and freezer icing over (whirlpool sent out a new heater probe) 6/08-over temp and ice buildup (bimetal and foam block replaced) 10/09-over temp, lights and motor shutting on and off (replaced defective board) 10/09- fan making excessive noise (ice buildup found on evaporator fan)11/13-over temp ice buildup in freezer, burning smell from fridge and no air movement or cooling in either compartment (need board rebuilt as on 10/09)Board no longer available from whirlpool, must be custom built at owners expense and will take up to 4 weeks. D/t continuing issues and whirlpool not willing to help the customer with replacement I would highly suggest no one buy a Kitchen Aid fridge.

On 11-29-2014 we were washing our laundry and our whirlpool washing machine started making a really loud noise so I went to investigate the problem. I open the bottom part of the washer to find out that the whole cement block to balance the drum was on the floor of the washer so I called the 1800 number on the machine and no one at whirlpool corporation wanted to even help. No one said sorry. No one said Let me see if I can help. No one. Every one I talked to they cant help at all. No one apologized once about the poor product that whirlpool sells and the defect that their products has. My washer is one year and one month old. So I can say truly with confidence that whirlpool product are the worst in the world plus their customer service even more. It is very sad after we paid all kind of money for our washer now I have to buy another one after one year and one month. Very bad customer service.

Whirlpool makes a beautiful product that does not last. I bought model WRX988SIBM in April 2015. Two years later the compressor is bad and no warranty coverage. Do not buy this model. It does not carry the Whirlpool 2-5 year sealed refrigeration warranty. Its amazing that an appliance that retails over $3K only comes with a 1 year sealed refrigeration warranty when Whirlpool offers it on other models. Be sure you know what your warranty coverage is before you buy any Whirlpool product.

We have had this Cabrio washer/dryer pair for 8 years now. I didnt want to buy a front loader at the time since they were relatively new and was afraid to roll the dice. We saw the ads for this pair, the washer was the largest top loader at the time and didnt have the agitator (which I liked) so we bought them from Best Buy. I purchased the extended service plan (thank God) because we started having issues within the first month. First was the dryer, it was making a funny squeaking noise. We called to have it looked at and the tech said the drum was out of round. He ordered a new one and it showed up almost oblong. Returned it and got a second (same thing). We straightened it out and put it in. Two weeks later the control panel went out. Repaired it. Then the washer started. In the first 3 years of owning these we had called to repair the washer 4 times and the dryer 4 times. We could have got them replaced after the 5th call. Of course we had replaced all the faulty stuff and the pair settled down for 2 years.Now I have had to repair the washers control panel myself, the dryer sounds like it is coming apart and sometimes runs for hours, and now the washer cant wash in any cycle but delicate because the drum bangs around and cant self balance any more. What junk!!! I know people that have purchased low end machines and have had no issues for decades, maybe a random belt or something simple. I wouldnt buy another Whirlpool set if they were the last manufacturer on the planet. They should be ashamed that they didnt recall these things for all the problems they had.

Purchased a Whirlpool top loading washer. The agitation cycle is unreasonably loud. So loud you can hear it everywhere in my home and cannot have a conversation within about 30 feet of it. When I ran it for the first time I thought it was malfunctioning and when I called Whirlpool I thought they would send a technician to fix the problem but they told me that the sound was perfectly normal for high efficiency washers! My other high efficiency washers were very quiet. The fact that they think this type of noise is not only normal but quite acceptable makes me quite certain to never buy any of their products again. Very disappointed to see what once was a quality company to be so lame.

We bought our Whirlpool refrigerator model # WRT318FZDB02 July of 2019. We liked it very much. The beginning of January 2022 we started having issues with things freezing. A few days later nothing got cold. The appliance technician that checked it out said our seals on the compressor were bad and needed a new one. He told us we were better off buying a new refrigerator. I contacted Whirlpool support and they told me the same thing. Our previous refrigerator lasted over 30 years!! I would think Whirlpool would make their refrigerators last longer than 2 1/2 years!!

They really dont make them like they use to, do they? This Whirlpool Cabrio aka Caprio has given us problems for the past 3 years, weve owned it for 5 years. It doesnt matter how much, or how little clothing you put in this washer machine. It will start going NUTS, Thudding, Banging against the inside of itself, completely out of whack, and then it will show a UL where the time is shown. Every time we do laundry this happens, and we have to stick our hands in the hot water and reorganize the clothes, and pull more and more clothes out till theres only about 3 items of clothing left! This washer is GARBAGE! I advise people to keep away from it. The washer we had in the past lasted us years upon years. These washers of now in days are Crap Garbage. Keep the fancy tech look, and give me the old fashion Knobs ANY DAY! Whirlpool brand is Not what it once was.

In the last two years I have purchased a new Whirlpool Duet washer and dryer with base, Whirlpool Gold refrigerator, and (less than a year) a built-in Whirlpool microwave. I have already had to replace the gaskets on the washer, which required a $65 deductible. I had to spend $65 on my service contract deductible for my dryer as they have had to order me a new motor and thermostat. My refrigerator had an appliance bulb as required installed; however, it still burns the plastic covering. I have not called on that yet. My microwave, which is less than a year old, has a small crack inside the door and part of the handle has broken off.

The average life of a refrigerator is 11 years. We purchased a Whirlpool convertible refrigerator (Model EL7JWKLMS02, Serial # EWR1339731) on 6/12/04 from the Lowes here in Visalia, CA. The first delivered was DOA and Lowes delivered another. That should have been a warning sign. We have had several problems with the product, as early as 2006. All repairs went through Sierra Appliance & Franks Appliances.We are now in the market of another refrigerator to replace this one. We have had to have freon added now for the third time. Sierra Appliance was unable to find any leak, but each time, the freon was depleted. In addition to the health hazard of having freon leaking into the house, we have had the distinct displeasure of having to deal with food waste, etc. Because of the ongoing problems with this product, we are now facing the reality of purchasing another refrigerator to replace this Whirlpool product.Due to this, I feel it is difficult to consider another Whirlpool product and will question any product to ensure that it is not Whirlpool-related. If there is anything that Whirlpool or Lowes can do at this point, it would be appreciated. Thank you for reviewing this note of dissatisfaction. It appears that we will be shopping for a new refrigerator this weekend unless we hear from Whirlpool. In any event, I would like this recorded as a complaint from a former customer.

Bought a stainless steel Whirlpool Gold bottom freezer in 2011. I purchased an extended warranty from Lowes (4) years, and still have another year left on it. Im constantly having to mop up puddles that form under the right front of the refrigerator. I read someone elses review with the same issue along with a sheet of ice forming in the bottom of the freezer and having to chip it out so the freezer drawer will close! Im calling the warranty company today.

Whirlpool Cabrio Top Load Washer Model: WTW7800XWO purchased at Lowes 8/26/2010. The lid was broken at the hinge in less than a year and was replaced under factory warranty. Lid falls down and pinches fingers. The second lid broke in the same location in less than a year. Lid falls down and strikes the eye. I’m speaking with repair technicians and researching complaints on this product. It appears to be a design defect that is not being addressed by the manufacturer.

We purchased our oven new in a package deal with the rest of our kitchen appliances four years ago. The bottom heating element in the oven has already stopped working. Every oven I have seen in my life has lasted a minimum of 15 years, and most 20. All I can say is DO NOT BUY WHIRLPOOL APPLIANCES! In the past 4 years, weve had the repair technician work on the Whirlpool refrigerator (once), dishwasher (3 times), and microwave (3 times). Now, the stove isnt working correctly, making this a total of 8 home visits by the Whirlpool repairman. Whirlpool is manufacturing trash for the landfill now, not quality lasting appliances.

We purchased the Whirlpool Gold Series smooth top stove from Lowes in December of 2013. The stove is not even 2 years old and it doesnt work. Last September, I noticed a few times that while baking food in the oven, it was burnt after only 10 minutes, due to a runaway temperature. After that, the oven wouldnt heat up properly, it would take too long to bake anything because the temperature wouldnt reach the reading on the display. Then it just stopped baking or broiling all together with the error Feature unavailable. Weve had a serviceman out at least 3 times. Of course, the warrantys run out and its cost us close to $500 to keep fixing it, and two motherboards and a bottom element later, its still not fixed. They wanted to order 2 more parts at our expense, but we cant continue trying to fix this lemon. I will be shopping for another oven, and will never recommend Whirlpool to anyone.

We bought a Whirlpool gas range about a year and half ago. The oven started giving lighting problems we had to light with a match every once in a while. Then the broiler igniter started giving same problems so I replaced the igniter, still did not work. Then I tried the control panel, still nothing. The igniters were about 45.00 each. The control panel was 250.00. Then I replaced the spark module and it is now working. Some models the spark module dont control oven and broiler but mine does. That was 200.00. The best thing was the part place I was ordering from would exchange the parts that you try and they also can answer questions either online or by phone, Appliancepartspros.com. My oven model # is wfg371lvs3.

Purchased Whirlpool side by side French door with bottom freeze on 2-18-13. After several repair calls it was replaced with new one on 7-09-13. Problems began almost immediately with water dripping inside door, resting of doors, and finally the freezer stopped working and the appliance would not shut off. Pm 3-14-15 a new compressor was installed. Two months later, the same issues are occurring. Freezer not working, and not shutting off. Waiting for a resolution. Would never buy another Whirlpool appliance.

My refrigerator & dishwasher were purchased less than a year ago. Ive already had all the doors replaced on the fridge and the new ones are rusting. Discovered same issue with the dishwasher. The company doesnt seem to be overly concerned with remedying the issue. No sense of urgency or concern for the customer.

In November 2012 we purchased a Whirlpool Gold Series refrigerator, model WRF990SLAM from Lowes. This model has the ice maker in the door. We also purchased an extended warranty. In July of 2013, we contacted Lowes service because the refrigerator had ice inside it, top left, where the ice maker equipment is located. Also, under the ice bin, there was a solid block of ice. Water was dripping onto our food inside the refrigerator. August 6, a 3rd party repair company came and replaced parts. One week later, the same issue was happening. We called for service again. It took until 9/9 for them to come out again, and replace the same parts. Approximately 2 weeks later, SAME problem. This time, I called Whirlpool directly. I was told that they (Whirlpool) are aware of the problem with this model, and they should have new parts in by the end of the month that will fix that problem. They even have a special team for this! I asked for their direct number (866-461-2287). On 10/7 I phoned again asking for a status update. I was told that they were just waiting for approval to call consumers to set appointments, and I should hear from them by the end of the week. I also informed them that I was no longer able to use the ice maker or water dispenser because it was now leaking substantially into the refrigerator. They made a note of it. As of today, 10/13, I have not had a call back. This refrigerator cost us nearly 2500.00 and has a known defect! Tomorrow, Monday 10/14, I will begin to demand a new refrigerator (different model!) via Lowes AND Whirlpool. Too bad Whirlpool. Were now going to buy a new gas range...and I can guarantee you it will NOT be a Whirlpool!

I purchased Whirlpool electric hot water tank in May 2011 (model no. EEZ80HD055V). The water tank was working fine for four months. It does not work anymore. I tried to get a hold of Whirlpool customer service. But I couldn’t get a hold of customer service at 877-817-6750. It is motel business without hot water. We could not open the business. We tried the best we could, but there is no contact or support from Lowes or Whirlpool. We have no other choice other than replace the hot water tank. We tried to find the right phone number to explain the situation to Whirlpool customer service rep.

7 months ago we had a Whirlpool dishwasher installed into our home. While away on vacation the piece inside malfunctioned and caused major damage as water filled the home. Whirlpool claims, that because it’s a part that they contract out to another company, they “Whirlpool” are not responsible! If you purchase a product from Whirlpool and they put their name on that product, then Whirlpool should stand by its product. Well... beware, you’re not going to compensate from Whirlpool! We urge you, make sure of whom the parts of the product your buying from belong to, before you buy it FIRST! Never again!

We purchased 29.7 cu. ft. side by side in February 2013. Ever since we got it, there is an excessive amount of moisture that builds up in the refrigerator section. It is to the point that the bottom shelf must be dried every other day; otherwise water spills out the front. Most of the moisture forms around the cold air duct work leading in from the freezer. We placed collection containers under the duct work which helped a little. We also tried various temperature settings, still no help. We tried online support and were given many excuses for the excess moisture. Support advised to change the defrost cycle, which we did and failed to correct problem. Support finally threw up their hands and said to call for service. Unfortunately, we were advised since the unit was purchased in Florida and shipped out of the country, the warranty was void. Try and get service in the Bahamas! Ha! This will be the last Whirlpool product we will ever buy.

Ive had a Whirlpool range for not even a year yet and the thing is on its third repair! First, the motherboard goes out twice. Then, a month after the second motherboard replacement, the broiler drawer handles melts off! ABT has been good at repairing it but seriously, I got the appliance last May! Now, Ive been waiting two months for some insulation piece on the handle. I think this product is a lemon and I am highly disappointed in this brand. I had called Whirlpool regarding this and they said their technicians would have to inspect the product and repair it. I trust them less to repair the stove than ABT!

MODELGR673LXOQ WHIRLPOOL RANGE - I purchased this range in January 2014. It is a good-looking range with a ceramic top and a convection oven. It has burned more food in a year than I had burned in several years. The top burners get red hot no matter where you have them set. They turn on very hot, then turn off and after a while they are red hot again. Cooking anything that requires a medium or less heat burns to the pan bottom. The oven works alright as a regular oven but when put on convection it burns the food closest to the fan before the rest is cooked. The company sent a technician to check the stove. He checked the temperature of the oven and said it was running too hot. He changed that setting and the first time I tried to bake it took forever. I reset the oven back to where it had been. The tech made no attempt to check the top burners as he said they couldnt all be bad. I hate this stove I had my former stove for thirty years and never had problems with it.

I purchased a Model WRF989SDAB01 Whirlpool refrigerator with the French doors and had it delivered in March 2014. The evaporator developed a refrigerant leak in May 2015. Whirlpool said it was not their problem since it was over a year since I bought it. The technician said this is a problem with this model. I am having it repaired under the extended warranty that I bought. One of my concerns is that the unit has two evaporators so the other one will probably start leaking any time. What a piece of junk. Dont buy Whirlpool. Their quality and service stinks!

I had an upscale Frigidaire suite of kitchen appliances and I loved them. A few years later I moved and needed a new set. I thought Whirlpool was about the same and I bought a Whirlpool set. The stove wont boil water or even fry an egg. It heats up and cuts off continuously. I called a service rep out and he called the engineer who told him it is designed like that and I need to use hot water on the stove to boil it. I was shocked at his ignorance and insulted by his stupidity. Ive been cooking for 60+ years and everyone who cooks knows you use cold water to boil water. But really, the stove does not cook anything. When frying eggs the burners cut off every few seconds to the point you cannot cook anything with it and the engineer said thats the way they designed it. DONT BUY WHIRLPOOL. THEY WONT EVEN BOIL WATER. HORRIBLE STOVE AND ONCE YOU HAVE IT YOU ARE STUCK WITH IT.

New whirlpool washing machine 2016 - This washer is supposed to be smart, but it NEVER fills up with water! I always have to fill a bucket with water and throw it in the washing machine. My clothes do not come out smelling fresh and its not the detergent to blame, its the washer! Im so disappointed with this product. Whirlpool should stop making products.

I bought a 38 gal. low boy electric Whirlpool water heater from Lowe’s. It was replaced because of a leak around the upper heating element after only one year. Now, the replacement heater is leaking in the same place, and it has been leaking so long that the electric terminals are rusted, water is standing in the cover plate, and the lining is soaked. I cannot see behind the plate and dont know it until the water finally made its way into the drip pan beneath the heater. When we saw the standing water, we turned off the electricity and shut off the water to it to stop a fire hazard. The warranty is up on my water heater, but my concern is that this could cause someones home to burn.

I bought a Whirlpool Duet Frontload washing machine and now two and half years after buying it, it sounds like the tub is about to spin out of the machine. The repair man said it would cost over $750 to install a new tub and bearings in it. I thought the product would have lasted longer than two and a half years. I will never buy another Whirlpool product!

I posted about our problem with the Whirlpool water heater on the 20th. Chris ** of Whirlpool called me back. He totally took care of the problem and got us back working. After 3 years, our problem is resolved. I am grateful to Chris for finally resolving the problem. He was professional, courteous and knowledgeable. Thank you.

On November 22, 2013 I loaded my Whirlpool Quiet Partner III dishwasher and set it to start. About a minute later I heard an odd noise coming from the machine. I went over to take a look and saw black smoke and flames coming from the little vent area at the lower right corner of the control panel. I opened the door to stop the machine but the washer kept going throwing water all over the floor. I shut the door and ran and turned off the breaker and then unplugged the cord from under the sink. Two different repair service companies said they would be hesitant to try and repair it due to possible unseen damages. I was lucky that I was home when it happened. I could have lost my house to a fire. There is a large consumer lawsuit already in play regarding this very thing.

Bought a Whirlpool 25 cu ft side by side in 2011 and now just 4 years later the compressor is bad. Called them and they only have a 1 year warranty, which is nothing for a compressor. They told me for $350 they could replace it and it be good for only a year. Not going to sink more money into a product even the company has no confidence in. The repairman advised to stay away from Whirlpool as they were not the company they used to be. Also the salesman at Lowes where it came from said they used to have a 5 year warranty but changed several years ago and the quality also went down. We have had refrigerators last 25 to 30 years in the past but no more thanks to modern technology. Thanks a lot. STAY AWAY FROM WHIRLPOOL!

We purchased a Whirlpool Cabrio Washer and Dryer in 2007. The washer sounded like it was going to take off and started leaking water. Two repair techs later, we found out it was the center bearing. They actually laughed and said they saw it all the time. It could be replaced (you need to replace the whole drum) for $300-$500, but I was told it would never be the same. I spoke with Whirlpool numerous times and they said they would do nothing, and I should have purchased the extended warranty. All I ask is for a company to stand behind their product. Im very disappointed.

I purchased a 50 Gal. Whirlpool gas water heater on Saturday, 12/31 to replace a 20-yr old unit that had failed. The unit was installed that day and it started right up but I noticed the burner had gone out about an hour later and the status light indicated FV Sensor Lockout. I tried calling Whirlpool but their customer service was closed. I tried troubleshooting myself using manuals and Internet forums without success. Everything I could find indicated that an FV Sensor failure could not be repaired and would require replacement parts. I called Lowes and was told they could not help me and I would need to talk to Whirlpool.I called Whirlpool again Sunday, 1/1, but they were closed again for the Holiday. I called two plumbers and both told me that the Whirlpool units were problematic and that if they did come out, there would be little they could do except charge me a lot of money and recommend parts to order as Whirlpool does not let them stock parts. Both plumbers also suggested that I consider buying another brand.So I went to Home Depot and purchased another brand with similar specs. I installed it that day and it fired up right away and has been running fine ever since.I talked to Whirlpool on Monday, 1/2, and they told me they would not issue an RMA for a unit that they considered usable. They also told me there was an FV Sensor reset procedure that they would have walked me through had I been able to talk to them that would have bypassed the sensor until a replacement could be installed. I told them that if they would publish this procedure in their manuals or on the Internet, I would have certainly done that. Im now fighting with both Whirlpool and Lowes to get a resolution to this problem. Im not sure about other Whirlpool products but their Water heaters seem to be very problematic.

I bought a Whirlpool refrigerator in February 2010 GS5VHAXWY00 side-by-side door ice maker. From the beginning, when crushed ice was used, the dispenser would freeze up. I had to remove the container to defrost. The container will not go back in place.Do not ever buy an indoor ice maker. I am out of warranty---very little help from Whirlpool customer service. They will be glad to send a service person.

I have a nice basic fridge, 2 side by side doors on top and a freezer on the bottom. Also has ice and water on the door. It does exactly what it should do, keep my food cold! Works great, lots of room and has adjustable shelves. No weird electronics to break. Had it for 3 years and I love it. Also, its American made which is important to me.

We came home from work and all was well. About an hour later, there was a strong burning smell in the kitchen, like wires burning. Sourced it to our refrigerator. Brought our grandson upstairs to the second floor apartment to get him away from the smell and possible smoke and/or fire. This unit has been repaired several times but not recently. After reading all the same reviews on this problem, we are definitely concerned that a fire may arise. Unfortunately we may wind up buying another, very expensive, refrigerator in the very near future but it will definitely not be a Whirlpool. I wish I could give Whirlpool a ZERO star because that is even too good for this company.

First, the storage drawer doesnt close properly aligned. When viewed from the side it looks off kilter. This is because the foot of the range interferes with it closing. Second, what is with the bright blue color of the time/temp on the computer screen? Everything else in the kitchen is green, but now I have bright blue(?).

I have been noticing my husbands shirts as well as my clothes continue to get what are spots of bleach and I do not use bleach on anything other than whites. This has been going on for quite some time and I noticed this morning another outfit is RUINED because of bleach spots. I decided to look up on the internet if this is a problem with this machine - AND IT IS! I am so disappointed I could cry. The clothes I have are donated to me. All my clothes are hand-me-downs - and my Whirlpool washing machine is ruining all my clothes and my husbands.

I have tried to contact Whirlpool, email and telephone call. Finally someone called me but Customer Service was poor. I asked her to have a Manager call me, but she never did. They also never responded to my email. We Purchased our new Refrigerator 21 c.f. side by side 2 months ago. The ice maker is driving us crazy. It is very loud. There are white plugs on the 2 bottom corners that make the appliance look extremely cheap. I am not happy with this Refrigerator!

Our Whirlpool refrigerator had to have repair in less than a year after purchase. That was a bad experience last summer and I had to complain through every avenue I could find just to get the replacement part shipped to the repair shop. Now I know it was not too smart on my part, but I bought a Whirlpool washer last September. You guessed it, not even a year old and it is not working. All I am hoping for in this posting is to help some other hardworking consumer make a better choice with their money. It is probably not advisable to buy Whirlpool.

My Whirlpool Cabrio WTW5550xw0 has had many problems. It started with the lid lock error, replaced it, lasted about 2 weeks, and got another one. I did the diagnostic test that pointed me to the actuator, replaced it. It worked for 2 weeks, got another one, and then another one. I was getting a bad reading from the control panel, replaced it, and that worked for a while. I found out that the actuator had a little water drops on it. I figured that it must be the tub seal, so I replaced it. That lasted about a week and a half, and it started dripping again. Now, I figured it is that the transmission has bad bearings, that causes my tub seal to leak, that causes water drips to go onto my actuator, causing a failure in that, which can give me all kinds of bad readings on the diagnostic test. I have replaced at least half the cost of the original purchase price on a year and a half old washer. I also bought my son a Whirlpool Cabrio washer a few months before I bought mine, and he hasnt had a single problem.

I am a senior who has not used the Whirlpool Range installed by the builder in 2007 very much. First of all, I did not like the way the covered jets hid the lighted jets when they were turned on low. Then about 8 months ago, I smelled gas and no one had used the range. I checked the knobs and one was turned slightly without any gas lit. I know that for years the companies were required to have push-in knob before you could turn them for safety reasons (especially children). These knobs barely push in before turning so that they can easily be accidentally brushed against and leak gas, which is exactly what happened to me again today. My daughter was visiting. Neither of us had used the range and when she left, I sat in my living room and smelled gas. I immediately checked the range and the small front jet was turned slightly on. The odor was so strong that I know it had to have been on for some time. Its been an hour and Im still airing out the house. I have used gas ranges for over fifty years and never had a problem such as this. Im thankful that I do not have issues with my sense of smell. Otherwise, I would not be sitting here writing this.

I bought a Whirlpool refrigerator (dbl dr) from Home Depot and received it on August 4th. When I went to clean it I found that blood had spilled from a roast and had accumulated all around the inside of the plastic shelf seal. It was impossible to clean. Water just ran inside the seal and diluted the blood. Then, it leaked all over my kitchen. I had a serviceman here for another problem, sent by Whirlpool. He said hed try to get them to replace the shelf. Never heard from him again. I called Whirlpool today. Was told I could buy another shelf. Otherwise, they didnt care. Said it wasnt a functional problem. This is a definite health hazard. Whirlpool used to be wonderful. What happened? I have a dryer, washer, and water tank about to need replacing. Whirlpool wont see a dime from me. (Home Depot, either.) This has become a very bad company. Ive contacted the NY Dist. Attys office. Meanwhile, I have a fridge with a major shelf missing for the holidays and for the foreseeable future.

I had water heater EE3Z50RD0550V installed on 11/3/11 and it started leaking July 29, 2013. Whirlpool gave me Return authorization # and said I have to return the water heater to Lowes (purchase place and original installer) to get a new one. Fortunately, Lowes said I only have to bring them the RA # and they will swap out the water heater. However, there is a $300 charge for installation. Whirlpool says they only cover this the 1st year, except when its a manufacturer defect. But they cant tell me how to prove its a manufacturer defect. Why else would a glass lined water heater start leaking only 21 months after installation?

We bought a Whirlpool dishwasher and microwave from a reputable appliance store. The dishwasher top basket broke within 30 days. The microwave lost 100% power within 30 days. Both under warranty but parts had to be ordered. Couldnt use either appliance for over a month. What is going on Whirlpool? We need a refrigerator, but I no longer trust your brand. I dont want it to quit and then lose all of our food! Please get it together and make quality products again.

I had a Whirlpool Natural Gas Water Heater professionally installed on 2-27-2107. This unit came with a Honeywell controller and thermopile assembly. Today is 05-18-2019 and the unit is not inoperative. The pilot is lit but the burner wont light. Here are the issues that I have come across so far: When I go to the Whirlpool site there is no direct link to Whirlpool water heaters, just kitchen appliances and washer/dryers. When I click on parts and accessories link it gives links to washers, dryers or pedestals. Again... No information about water heaters. I scroll down to the bottom of this page and I see a link to All Replacement Parts When I click that it takes me to another site managed by RepairClinic. When I enter the model number for the water heater it says Not Found. I entered the part number for the thermopile on the tag on the orange wire #321165-002 and 100078039 and again it returns as Part Not Found.Its obvious that Whirlpool is putting little effort into supporting their water heaters or their customers. I called their support line and they were able to order the thermopile assembly for $55 plus $27.95 in shipping to get it here by Tuesday. Today is Saturday. So that means almost 4 days without hot water. And since this water heater was a warranty replacement for a previous one that went bad they will not cover the cost of replacement parts for the thermopile. Lesson learned: No more Whirlpool purchases for any of their appliances.

Cabrio top loading washer - I have had this set for 3 years. The first 8 months it was fine, then came all the rust. I had to go to the BBB and file a complaint as everyone at Whirlpool would not help. Last year they finally replaced the top, and now, its rust yet again. I rinse and dry the machine when I am done using it. The repair man said it was because manufacturers are not using primer and just one coat of cheap paint. What now? Ill see if I can get the lid off and sand it and use rust preventer on it. Never again, I should just junk this piece of crap and Whirlpool should shut down if they cant make anything worth our hard earned money.

Purchased a Whirlpool Cabrio washing machine from Sears in August 2010. Last week, while my wife was washing clothes, we smelled smoke and the washing machine stopped working in mid cycle. Called Sears repair and came out Saturday 10/10/2015 to inspect the machine. When the repairman checked the codes he determined there was a problem with the motor. When he lifted the machine up the capacitor fell out in 2 pieces. It had blown apart and the motor had burned up. The estimated repair bill was $480.00. Needless to say we did not repair the machine. We will never buy another Whirlpool product or any other product that they manufacture under a different name.

My two year old Whirlpool refrigerator died. The compressor went bad. $859 to replace it. I only paid $999 for the fridge. This was crazy. Two years old. Heard it was not uncommon and the technician said most refrigerators warranty the compressor for up to 5 years but not Whirlpool. Had to go buy a new refrigerator.