I purchased 5 Whirlpool appliances when I moved into a new home approximately 5 years ago. The selection buttons on the plastic panels on the front of 3 (dishwasher, washer and dryer) out of the 5 appliances has either broken completely through or are in the process of breaking through, leaving an ugly appearance on the front of the appliances. When inquiring if I could replace these panels, I was told that one (dishwasher) would cost me $100.00. I believe that the structure of these panels has been extremely poorly manufactured. Why would you put perforation around each button? It is obvious that they would push through. What can Whirlpool do for me?

Last July 2010, I bought a Whirlpool Washer with model # WFW975OWW01. It broke down Sept 2011. Fourteen months so its out of warranty. I paid a serviceman $136 to tell me it needs $1,350.00 worth of parts and service. I sent an email to Whirlpool for help but no response.

My gas hot water heater failed. The pilot went out and could not be relit. The Whirlpool water heater has a 12 year warranty and we are in year 5. Sears said they could not send anyone to repair it because there was no service in our area. We live 30 minutes from Dallas/Ft. Worth, Texas. They offered to replace it even though I had a plumber on standby, ready to replace it. They said they could not let me do that if they had one in stock. After waiting a week for the delivery, they called at 4:45 pm to claim that the delivery truck would not start. They would not put it on another truck or help in any way. Then they said it would be another week before they could deliver it. All this time we are going without hot water, trying to cook, clean, take baths, do laundry etc. They had no sympathy and refused to provide compensation so I could proceed with installing a new water heater. I could have done this if I knew a check was in the mail but they refused to allow me to do this. This happened to me at another big box store years ago and they sent a check immediately. The customer support in the hot water heater dept at Sears was terrible. If they cant send someone to repair and they cant provide a replacement within a few days, it is only reasonable to offer payment so that the customer and move forward with repairs. I will never buy another appliance from Sears after this nightmare. On December 4th Im supposed to get the delayed hot water heater but if the truck doesnt start, who knows how long I will have to wait. I am reasonable and flexible but lack of hot water is something a customer should not have to wait two weeks to get resolved.

My new Tridel Condo came with a brand new Whirlpool washer and dryer and the washer has not been working well since the beginning. After several service calls the repairman finally gave up and now were getting a new replacement. However its been a nightmare working with them trying to get this washer replaced. The Whirlpool delivery team and the service team cant seem to coordinate a time together for the replacement. We had to make a first appointment for the service guy to uninstall the old unit, the second appt for the delivery guy to drop off the new unit and pick up the old and a 3rd appt to install the new unit. Each appt has a 4 hour wait window. This is their standard procedure, which is totally inconvenient to customers. To make matter worse, the delivery guy came too early for a condo delivery (before 9 AM) and told us he will be back the next day. And he didnt show up. It looks like now we actually have to have 5 appts (including the 2 missed appts by their delivery guy) to have the washer replaced. All the time I wasted waiting for this delivery is worth more than the washer itself. What would be 4 hours X 5 appts = 20 hours. This is the worst customer experience ever. After 3 months of constantly calling Whirlpool and still no washer. Whirlpool needs to hire some competent people who actually care about servicing their customers.

I made the mistake of buying a whirlpool product and was wondering if there is a support group for angry unsatisfied customers? I have owned a duet washer and after 2.5 years is giving F1E2 error and is junk.

Hi. We purchased a french doors 32 cubic feet refrigerator from Home Depot in January 2017. Since day one it has not worked correctly. We have dual ice makers and neither one works. The fridge doesnt cool at all! Whirlpool sent out an appliance repair company who said they ordered the parts. Its been 2 months and guess what still no parts on order and still have no refrigerator. So after 45 or more minutes on the phone with them for the millionth time we came to the conclusion that we are stuck with a POS refrigerator! They refuse to swap the fridge out. They said Home Depot would have to swap it and its against their policy. (Thats another complaint department.) We will never recommend a Whirlpool product again. Never buy Whirlpool. They love taking our money and thats where they stop.

I purchased my Whirlpool Double-Oven one year ago and couldnt wait to use my new oven. I was told it was so efficient because I could use the top oven for quick baking instead of heating the entire oven (plus I could set it at different temperature settings). About a month in, I cooked 2 pizzas side by side. The first one burnt to a crisp and the one right beside it was doughy on top and burnt on the bottom. Not thinking, I blamed the pizzas! I also blamed myself, thinking it was me not being used to the stove.A few weeks later, I baked cupcakes. About 15 minutes in, I smelled burning and the cupcakes were raw on top and burnt black on the bottom. I called Whirlpool and they sent a technician out and he replaced the circuit board/clock. Worked for a couple of weeks and then the burning began again. Called Whirlpool again - another technician came out and adjusted the temperature. Here I am again, had to call Whirlpool again.This stove has been so inconsistent and Im so tired of wasting food because of this stove. My 4-year old Whirlpool dryer also went out last week so needless to say, Im not very fond of Whirlpool right now! If you are planning on buying a Whirlpool product, buyer beware and I hope you have a lot of patience...

Plastic comes off drawer when you pull it out! Trim around glass cracked. Drawers cracked. My drawer literally has a hole in it! Warranty doesnt cover that! When checking reviews on amazon people all had same complaint and when they reorder product it does the same thing. This fridge was purchased less than a year ago! I purchase it from Discount Direct, a Costco outlet store!

This is a great choice if you like a drawer for a freezer. It’s double door. The racks are easily moved. There’s are drawers for beverages and cheeses and vegetables. One downfall is replacing water filter cartridge every couple months and freezer could be set up a little better so you don’t have to pack things on top of each other.

I have a Cabrio washing machine that is just barely two years old. I have already spent over $500 on repairs/service calls. The first repair was the drum which cost $300 + to repair. Typically, my experience with washing machines is I buy a new one after years of service simply because I want a more updated model. I just bought a different brand to replace the Cabrio as it has another broken hinge (one rusted out. How bizarre is that?) And it wont work on some of the choices for cycles. The first time I called whirlpool, they were totally unresponsive and told me there was not any problems with the machine even though the part I needed was on backorder for three weeks. I have never been so frustrated with a product I thought was a reliable brand, not!

My husband and I purchased our Whirlpool Gold French Door Fridge-Freezer on bottom in January 2012. Water collects in the bottom of the freezer and creates thick sheets of ice. When the bottom of the freezer is a full sheet of ice, the water just drips onto the floor. I come home from work to a river of water that stretches across the kitchen--and now my linoleum floor is warping from the water. This started only 6 months after we bought the refrigerator. Im sure the warranty is out--what can I do?

I purchased a Whirlpool refrigerator from Gerhard’s Appliance, Glenside, PA on 12/15/2011.There have been problems with the unit since it was delivered on 12/19/2011. The doors were not the same height. There were stains (which looked like rust) on both doors. A shelf on the door and one in the fridge were missing. One of the deliverymen adjusted the door height then, and the door has been creaking on opening/closing since. That door has been replaced, but the problem continues. The freezer (which has an icemaker/water dispenser built in) started to produce ice on the inside of the unit door and on the wall surfaces. Attempts made to rectify the problem were unsuccessful. A new freezer door was ordered. After the door replacement, the frost problem got worse. I can fax you a copy of all service contacts so far (at least 7). Please help me replace this lemon.

I would like for the public to be aware of an issue I have had with my Cabrio Whirlpool washer and the extended warranty service that Whirlpool sells to customers. My Cabrio washing machine is less than three years old and is an inferior product. The circuit board has gone out on my washer twice. Each time my washing machine breaks, it is out of service for three weeks and I have a family of four people. My washing machine broke down with a major circuit board failure for the second time in three years on January 23rd. I called the extended warranty department at Whirlpool and they sent an incompetent repairman to fix my washer. We are going into week 3 of listening to various stories on why it is taking three weeks to source getting a part overnighted to fix our washer. This man has ordered the wrong parts, says he cant come to us because of weather, cant get the parts, etc...I just got off of the phone with the warranty service after speaking with a supervisor and they tell me they cannot source another repairman and we still have to wait. My questions to corporate office at Whirlpool is how long do you have to wait to get a washer repaired and what type of product and extended warranty are you selling to the public? A very inferior washing machine and a very unhappy customer! I will never buy another Whirlpool appliance! BUYER BEWARE, THIS COMPANY HAS POOR CUSTOMER SERVICE! THIS IS MY SECOND GO-AROUND AND THE SECOND EXPERIENCE HAS BEEN IDENTICAL TO MY FIRST ONE - TERRIBLE!

We purchased the Cabrio washer and dryer due to the companys past reputation and our own past experience with Whirlpool appliances fully expecting to receive great performance and durability. We have had the pair just about 2 years and the washer started experiencing problems during the spin cycle. The unit would get out of balance easily and then it would stop without spinning, leaving the clothes very wet. Well, as our past experience had indicated to us the washer is usually much more reliable than the dryer, or thats the way it had been for us. So we only purchased the extended warranty on the dryer. Not being covered on the washer we located a local technician and he promptly diagnosed the problem as the transmission failed causing the noisy bearing and the failure of the unit to spin properly.Our tech quickly repaired the unit but this failure disappointed me to the point of contacting Whirlpool. Thats where I came upon this site and saw the multitude of complainers with the same type of problems and some that are worse than ours. Our purpose in this review is to add to the 1100 or more reviews that report the same kind of issues. We are now in the same mindset as the 1100. Will we ever buy another Whirlpool? Probably not, especially since it doesnt look like Whirlpool wants to stand with their customers to make it right. Customer support is just as important to us as the reliability we seek. I would much rather spend a bit more in the price than replace or repair the unit after the purchase. A little economics lesson for our friends at Whirlpool is that if you abandon your 1100 customers you will save about $440,000.00, but those 1100 will tell everyone they know of their problems with that product and as a result many thousands will never purchase a Whirlpool. So if we all influence 5 of our friends not to buy, then 1100 X 5 = 5500 people X an average price of $800 which equals about 4.4 million dollars of lost sales. Seems like a no brainer to want to stand behind your customers. We dont believe that any washing machine on the market should fail after a few months to 2 years. These products should be built to last many years and the maker of these products should have that goal.

I wish I had read all these reviews before buying this junk/lemon of a machine. Havent had the machine for a year yet and lots of problems. Only can wash five towels at a time and thats pushing it. Decided I would deal with it, until it gave other problems. First sometimes skipped cycles, then water came in when it was spinning. Called for service. Checking to see if we even can get you service in your area, representative says.About a week later tech comes and puts two parts in and left. Happy to get laundry going but, guess what??? Washes only doesnt do anything else and trying desperately to drain water out. Of course I have to take clothes out and bring to laundry. Tech comes back next day. Now he cant get any cycles to work either. Fried, tech says. Sets me up for next Saturday, fine.Now get a call on Monday, not coming. Tuesday is next appointment. Apparently inventory representative says. Didnt know that before??? Call Whirlpool, service first, then company. I want a new one, this is definitely a lemon. Nope, tech will be there on Tuesday. I hope Whirlpool reads this. They should be ashamed of their company. They used to be good, always bought their products. Dont buy these machines, trust me you dont need the aggravation. Totally disgusted.

Whirlpool Gas Range Model WFG524LAB0 - Purchased on 09/2013. Product works well but noticed back in July 2014 that cook top was not cleaning well. Did not mind it that much thinking it was just baked on grease and would just do a general cleaning when I get to it. After the holidays and now getting around to clean the range top, I discovered the cause of range top not cleaning well. The porcelain was chipping away.Today I called Whirlpool customer to complain and see what they do. They replied that it was just a cosmetic blemish and that was not covered under warranty. I told them that that cosmetic blemish lead to rusting and eventually result to failure of the product. They also said it was out of warranty but was eager to have a tech come over to check the problem out for additional fee.

Please do yourself a favor and stay away from both Whirlpool and this unit. I purchased it from a local dealership and paid $881.00 which included tax and delivery cost. In less than 2 years, it broke. Whirlpool does not offer a warranty on the unit. After having a Whirlpool repair person come out for a cost of $75.00, I was informed that the parts to replace would cost $800.00 not counting additional labor cost which was TBD. I contacted Whirlpool and went from Agent (Phylicia) to supervisor (Ashley) to Manager (Carol **). The best offer I was given was to buy the parts at a discount of $400.00 which did not include tax, delivery or labor. So it would have run approx. $550.00 to over $600.00 to fix a $771.00 washer.My next letter is to Jeff Fettig (553 Benson Rd, Benton Harbor, MI 49022/ CIO of Whirlpool) to let him know how impressed I am with his product and customer service support. The next Whirlpool item I buy will be never. Take this as a word of warning to go Maytag or any other vendor because Whirlpool will not support you once the sale has been completed. Good Luck.

We purchased our Duet in July 2010. It worked great until two weeks ago when the washer sounded like a 40-year-old washer. The bearing sounds like an extremely high-pitched “wrr”. We can hear it in the back of the house. I looked online to get parts and noticed that you cannot replace the bearing. You must replace the entire rear drum ($358.00). This does not include the labor. I talked with a technician, and they said the whole drum must be removed, not a one-man job, and to take the whole thing apart. Now, theres no price for installation. Lets go low ($200.00). Probably more. I cannot get a price nailed down without a visit. Now add those together ($558.00), I could put almost $600.00 into a washer that this could happen to in another 2 years. Wow.We had a washer that lasted us 15 years without any parts. Is there anything that you can do to help me? This is totally outrageous. Please help. Thank you. This was part of my chat to Whirlpool. Whirlpools response was I understand your problem but cannot help you. It is out of warranty. No help, no discount, nothing. I will and have all my friends never to purchase Whirlpool. This is from a so-called American company. Im very disappointed.

The washing machine has been through 4 boots. The boot material is so flimsy, that they tear constantly causing water to leak out of the machine. There are times it is minimum water, and other times a lot of water.

Have used washer since 2005. Still runs today. Minor repairs done. Is reliable brand. Whirlpool gold model washer purchased at navy exchange. Will buy another whirlpool again. Have bought other brands which lasted 7yrs and then needed replacing. This whirlpool is the best. Lasted 15 yrs and still working fine doing 5 loads a week.

Microwave didnt even last 2 years. I bought all new Whirlpool Appliances less than 2 years ago & they were not cheap! The microwave wont work until the light comes on inside. Well for some reason now it takes almost 10 minutes for the light to come on & I have to leave the door open until then. Now today I cant shut it because the light wont shut off & if I try to shut it the fans runs constantly. So frustrating as they dont stand behind any of their products! I will never ever purchase anything Whirlpool again.

6 years ago, we bought the refrigerator, the oven and the dishwasher. Theyre all Whirlpool appliances. With that, we took the 5 years guarantee extension for all those appliances. After 6 months, the electronic front panel of the oven jammed. The repairman knew what was the problem and had to change this panel. Then a month before the expiration of the guarantee extension, the refrigerator never stop running. I have to call them 3 times before they place a service call at the right place, very strange. Now, the auto-clean on the oven doesnt work. The very known E1-F5 error on the display and no solutions that work. Whirlpool, never again and I will make the real publicity for this brand without a shame.

We have a small space that fit a washing machine and figured we could add a dryer on top but didn't have an outside vent, so took a chance in this model. It fit perfectly in the space and saves us from a regular trip to the laundromat. It takes a bit longer to dry but is energy efficient.

The machine is reliable, does not take forever to do a load, it is relatively quiet. It has sufficient options depending on the size of the load. Additional options are time setting, choice of warm, cold or warm/cold water settings. On light and medium loads it extracts almost all of the water; on heavier loads an extra dry spin does the job. In all the years that we have had it, it has required only one service call. The maintenance man told us that this model is the best in a series and he recommends that we hang on to it for as long as possible. We're very happy with it.

Whirlpool Washing Machine Model WTW4950XW0 - This washing machine was purchased as a gift by my father. We have owned this machine for about 2 years. I am very disappointed with the quality of this machine. I have 3 children and several pets. I use my machine a lot and need a quality item that will last. This machine is not that item. Within a few months, the machine was off balance and bolts had to be tightened. We have had problems with the belt, bolts coming loose and the machine not draining.More recently, the machine has become very loud... For approximately the last 6 months. My husband has taken the machine apart and looked for anything to be wrong with it and has found nothing. Now the machine is not running. I will turn it on and it fills with water and then stops. I will clear it out and restart it and it does the same thing. Another issue has been with spinning and draining. The clothes are soaking wet even after the drain/spin cycle.I have researched what could possibly be wrong with this machine and have found a vast number of items that could need replaced. With the money I have already put into fixing this machine in the past and the amount it will cost to fix it this time, I believe I will be further ahead if I buy a new machine made by a different company. I will not be buying a Whirlpool product again.

Whirlpool Cabrio Platinum top loader 2014 model - This washer is an over engineered piece of junk. It takes forever to wash anything and it never gets anything clean. I wish I would of just bought the repair parts for my old machine which I had for twenty-three years.

I was having trouble with our Whirlpool water heater and thought that wed have to shell out and buy a whole new one. Chris saw my complaint and helped me find the right replacement kit at a minimal cost, as my unit was out of warranty. He even took the extra step and overnighted the parts for us at no extra cost. I was extremely impressed with Chris professionalism and customer support skills.

Whirlpool cabrio mod. WTW7300XW1 - I purchased this washer Nov. 2013. It did not work right from the day of delivery. Our clothes come out dirtier than before washing. Machine smells awful. I spend more in machine cleaner than in laundry soap. I have always purchased Whirlpool. Very dissatisfied with this model.

In the middle of the evening the door glass spontaneous shattered with nobody around. Its only a 3 year old microwave builder installed in a new home. Ive always heard Whirlpool appliances are garbage but this proves it 100 percent.

My Whirlpool range is a great buy and it cooks well. I have never had a brand new range that snaps, crackles, and pops. It was letting me know that it needed to be broken in and used for a while. I have had it for a few years now and it is just now getting broken in well. I do not even smell the brand new burn smell it use to give off anymore. Awesome!!

I called in a claim on June 10, 2016 & my washer is still not repaired. The extended warranty company, AIG sent L&W out to repair my washer. After 3 visits its still not repaired & the technician hasnt fixed it. Not only that he had laid it on concrete & scratched the outside. This is the worst experience Ive ever had with a warranty company or service company. Aig wont even return my calls. Will never buy a Whirlpool appliance again.

I have spent 30 minutes trying to change light bulb under the oven and get the cover plate back on. I watched the film on how to do it, it was amusing to watch the struggle to get it on. It was amusing to say the least. Whirlpool watching it??? I do not believe whoever designed this worthless time consuming light cover never tested it one time, or it would had been more user friendly. It amazes me what kind of trash they can build for us consumers to have to deal with at times. Tomorrow this overhead piece of junk is coming out and being replaced by a non Whirlpool one. I am going to get a tractor and smash it into little pieces and put on side of street with a note saying this is what happens when you try for an hour to change the bulb.

The first thing I noticed after purchasing this stove was that the glass top did not clean properly. I used the product given to me by Sears and tried several others but still could not take marks off of the glass top. I never really used the oven that much until retired and started baking often. The self clean does not work at all unless by self clean they mean that you yourself cleans -- I should say scrub it down. I previously had a regular self clean and it truly self cleaned. All I did was take wet paper towel and wipe out. Yet when I asked the Sears saleswoman about how it cleans I was told that it was terrific -- I would not have any problems! What a laugh!

I bought a 40 gallon Whirlpool water heater product no. 0733336 and it completely broke down after one year and three months. No pilot light even. I called the number on the unit and was informed that only the cost of replacement parts would be covered by warranty. I still have to pay someone 60.00 an hour to come out and fix it. Never again will I buy a Whirlpool product.

We purchased Whirlpool sports model on 2/1/2011. We faced a problem with the motor in a month’s time. The service man told that there are fluctuations in the power so it went wrong. They replaced it after 15-20 days’ time. We also complained that it’s making noise and then he told that we should keep it on the stand. We did so, even then, it’s still noisy. Now about 3 weeks back, suddenly it stopped working during the wash. I never overloaded the washing machine. We complained to the dealer. The mechanic came and told that we had to replace some parts and he will get in a couple of days, but he never turned up. When we contacted the dealer, he said that the parts were unavailable and he will send them in a couple of days. I am fed up of that answer. We could have purchased IFB instead of this.

NU40T61-403 have had problems since day one. First problem was while heating up would make loud humming noise. Whirlpool sent out plumber. He adjusted plate under tank. That worked for about 2 months. Then pilot started going out. They send same plumber out again, also sent replacement part. Problem was fixed however about 2 months after that started leaking and flooding our garage. Called company again, was told that is no longer under warranty and stated we need a thermal expansion tank. I stated “why would we need this? This unit is only a little over a year old. Im not going to purchase another tank. A water heater should not overheat like this.” Long story short my husband has been burnt severely from the pressure build up as he was out in our garage walking past the tank when it decided to release pressure even though no water was being used at that time. He ended up at the ER with 2nd-3rd degree burns. I called Whirlpool again and was only told we need to install the expansion tank. Im so unhappy with this product I will never buy anything made by whirlpool again.....

Bought Whirlpool refrigerator (Model # WRF560SEHZ00) December 2018. After 2.5 years, the door hinge failed and could not be replaced. $1,000 for new door. Dont buy! Too bad there wasnt a 0 option for the rating.

The control panel is difficult to use. It’s much too easy to switch power from the top oven to the bottom oven without knowing it. In addition, the plastic cover over the control panel makes it difficult to use especially if your fingers have flour or oil on them. It would be much easier and more accurate if knobs were used to control the all the functions instead of a electronic screen. Also, the clock has never operated accurately. Always runs fast. Temperature of the ovens is pretty accurate. However, it does take a long time to reach chosen temperature. Both ovens are large and able to handle an 18 inch round pizza dish. Other than the control panel, I’m pleased with both the gas stove top and both electric ovens.

I purchased a high dollar built in side by side fridge with custom panels in 4/2005 and had my first service call in 5/2005. Since 2005 we have had 11 service call mostly for defrost failures and over temp. readings. From 2011-11/20/2013 we were issue free then the fridge over temp alarm sounded and we could not hear the fan motor. We had the certified tech come out to evaluate and found that the main control board needed to be replaced. Kitchen Aid/Whirlpool no longer make this item and forwarded us to Core Centric solutions to have a new one built. After speaking with the certified tech who had been out to service our fridge 11 times he informed us that these boards in his experience have never lasted more than a year. We spoke with a customer service rep a Kitchen Aid and asked about a prorated discount on a new built in fridge and she said it seemed reasonable but after checking for authorization informed me I needed to have the board rebuilt at my own cost and that even though this typically takes about 4 weeks to build the fact that our family would be without a fridge is not Kitchen Aids problem. 6/20/2005-over temp/not cooling call (replaced defrost thermostat) 9/2005-over temp/freezer iced over in bottom (freezer decided and drain unclogged) 10/05-over temp/not cooling (replaced fan motor) 9/06-over temp/freezer iced over in bottom (drain line decided, kitchen aid had no advice on how to fix) 10/06-over temp/not cooling, ice build up (whirlpool recommended replace heat kit and bimetal) 11/7-over temp and ice buildup in freezer with leakage (adj to drain pump and defrost drain basin made) 11/07- over temp and freezer icing over (whirlpool sent out a new heater probe) 6/08-over temp and ice buildup (bimetal and foam block replaced) 10/09-over temp, lights and motor shutting on and off (replaced defective board) 10/09- fan making excessive noise (ice buildup found on evaporator fan)11/13-over temp ice buildup in freezer, burning smell from fridge and no air movement or cooling in either compartment (need board rebuilt as on 10/09)Board no longer available from whirlpool, must be custom built at owners expense and will take up to 4 weeks. D/t continuing issues and whirlpool not willing to help the customer with replacement I would highly suggest no one buy a Kitchen Aid fridge.

We purchased a Whirlpool Gold French Door refrigerator with a bottom freezer in Dec 2009. We discovered a leak dripping onto the finished basement ceiling. We discovered after several attempts that the plastic evaporation tray was broken (since day one). Previous defrosting had obviously evaporated into the hardwood until now. This item, although obviously broken when installed, was not fixed as the warranty had run out.Boo to Corbiel and to Whirlpool. They are financially not worth a lawsuit.

Whirlpool Gold Refrigerator Control Panel Failure - This French door refrigerator with freezer on the bottom was purchased new in November 2008. This August, the refrigerator stopped cooling. I contacted a reputable local appliance company who diagnosed the motherboard was not functioning on the appliance. They ordered a new one from Whirlpool and replaced it. Forty-five days later, the replacement motherboard stopped functioning. When I contacted Whirlpool directly to inform them what was happening, they continually stated that the appliance company was not part of Whirlpools approved appliance technicians, and offered no assistance in guaranteeing the problem will not continue to happen. I am extremely disappointed with Whirlpools customer service and unwillingness to guarantee their products. A 3 year old refrigerator should not stop working.

On April 17th mid morning I noticed that the freezer side was not keeping items Frozen. Everything was melting period. I then opened up the refrigerator side all the items are not as cool as they should be. I then proceeded to do a Google search to see what I should check for in regards to the freezer and the refrigerator side not keeping cool. I then proceeded to pull the refrigerator out to inspect the back of the refrigerator. When I did that I noticed there was a hot mark on my wall, as well as a huge it burn mark on my floor. I then unplug to the refrigerator do the huge fire hazard and I touched my floor and it was very hot to the touch.I called my stepfather who is a firefighter and had him come over right away. He said we needed to take the refrigerator outside right away because the compressor had overheated and that is why it started to burn my floor. He then went to the fire station and got a heat sensor check machine, and we checked my wall and floor and we had to make sure that it was cooling down so it did not start my floor boards on fire so then we had to put a fan on it to cool it down. I then went and purchased a new refrigerator, due to this one was no longer able to be used or repaired. The refrigerator was only four years and 5 months old. For a $1,300 refrigerator it should last longer than 4 years.I called Whirlpool the following day or two days later and regards to this issue. The only thing they could tell me is that they were sorry, this refrigerator almost started my home on fire and we have six children a family of 8. It ruined my floor and part of my wall in my kitchen and we have lost a few hundred dollars and groceries. This is ridiculous and not the first time, I read a few others having this issue, Whirlpool said they have never received any complaints in regards to the refrigerator burning the floor and does not see it as a fire hazard at all.

Whirlpool refrigerator - I purchased $6950.93 in Whirlpool products in one day last year at HH GREGG in Lexington, Ky. The refrigerator was purchased on that day September 18, 2012 and my kitchen wasnt going to be ready until December, but I wanted all items bought for measurements (specs) for the new kitchen designer. HH GREGG delivered to my garage October 26, 2012 because they couldnt hold any longer, but when we purchased that day they promised to hold till December when my kitchen would be finished. I have Proof from the kitchen installers the day they finished, December 28, 2012, was the day the appliances were installed. Well here I sit typing this letter on January 7, 2014 and my Whirlpool refrigerator is as of right now is in need of a compressor while losing approx $1000.00 in purchased food. In other words, approximately $900.00 in repair cost. Isnt Whirlpool a large enough company to stand behind its products when I paid $2599.00 for this refrigerator for at least one year from installation instead of purchase date? My fiancee has been trying to work out a solution with Whirlpool and the parts are on back order now. For at least two weeks we have been without a refrigerator and have two young children. Doesnt it show that the parts being on back order from Whirlpool, barely being a year old prove the defective product is being sold to the public daily? I plan on going further with this action due to the name Whirlpool all over my kitchen which disgusts me. Im going to write every columnist I can and do all I can with what little resources I have against this large company if no one helps us. This is absolutely an injustice against consumers...

My washer worked less than a year. I finally called Whirlpool and they basically said, were a big company and you must for the rusty, broken drive shaft, pay for all new computer face plate, and service repair. I contacted the FTC and they told me they needed more complaints in order to make them do a recall on Cabrios. Good luck!

I waited on hold for 24 minutes to be greeted by Audrey in Michigan giggling. I put in my service, need to be told I have to wait 3 days to have a tech arrive for A BRAND NEW REFRIGERATOR! To top off my disgust of WP, our BRAND NEW dishwasher doesnt work properly either. To wait, to receive ZERO voice of concern or even a fake apology, is disgusting to me. I am extremely disappointed! Shame on you Whirlpool! Shame on you!

Model WTW7600XOW, installed 12/9/2010. For about 4 months this washer has sounded like a jet plane when spinning. I called Whirlpool to see if it was recalled or what they recommended. They provided 2 repair places near me. The repair shops recommended buying a new washer since the repair is so costly. A 4 year old washer used by 2 people should have bearings that last more than 4 years.

I purchased a brand-new, $4600 36 gas range online. They finally installed all appliances by 10:30 pm last Friday, July 8, 2011. On Saturday, July 9, 2011, I woke at 2 am to weird smell (gas). I opened all the windows and went back to bed not sure since we never had gas before. Gas company came out that day and determined that the burners were bypassing gas. Jenn-Air said it was normal for some gas to come out and that they have sent the repair technician out three times to not find any leaks. The gas company red-tagged the stove saying it was hazardous. Jenn-Air has terrible customer service. I was on the phone Monday to Friday this week, every day talking with safety managers to supervisors with no results. This will be the LAST Jenn-Air purchase EVER!

The smell from the washer has gotten so bad we have to keep the door closed to our laundry room, or the smell will permeate the whole front part of the house, as it is we have to keep the door to garage which is adjacent to laundry room open to air out laundry room. Our friends and guests, are aways telling us we have water leak or something mildewing, or rotting in our house. The washer works well, and I cant find any buildup. We frequently run it through clean washer cycle, it smells OK for a hour or two, and odor returns!

WRF989SDAM00 - We spent about $1800 on a Whirlpool French Door refrigerator and at 1.5 years we had to replace the compressor for $700+. Apparently Whirlpool will only warranty for 1 year. The repairman told me the compressor he was putting in is exactly the same model as the bad one he took out so I guess I am not surprised that it only has a 1.5 year working range. We are now 1.5 years into the new compressor and sure enough it is dying again. Now it sounds like a jet plane taking off. By the time I replace it again I could have bought a new refrigerator. I am trying to figure out if this refrigerator is on recall because I cant keep replacing the compressor every 1.5 year. Never again will I purchase a Whirlpool product. I think they know the lifespan of that compressor and that is why the warranty falls just short of it!!

I bought a Whirlpool Cabrio a few months ago. Every time we do a load of laundry, the clothes are not getting cleaned. Dark colored clothing, including grey clothing, comes out of the washer with white residue, streaked all over the clothes. We have to rub the residue into the clothes to make it go away. If we attempt to dry it and do not get the residue scrubbed off the fabric, when the clothes get dried, there are white streaks in the clothes. This is extremely frustrating. We spend a lot of time getting the residue rubbed into the fabric every time we do a load of laundry.The local appliance store has told us that perhaps we are using too much soap. We have used nothing but the high efficiency soap, as recommended by Whirlpool, and have reduced the amount of soap per their suggestion. It is now to the point where we are using hardly any soap at all, in the hopes that we would not have to spend 30 minutes working on the clothes after every load. That has not worked. The white residue is still all over the clothes, and since we are using less soap, I dont think our clothes are actually getting cleaned.When we wash a load of whites, they arent getting cleaned at all, even when we use bleach. In fact, when I compare brand new undergarments with recently bought undergarments that have been washed a few times, the ones that have been washed a few times are noticeably different in color, they are actually starting to turn grey in color.I have used Affresh in the washing machine, per the manufacturers suggestion, numerous times. We had thought maybe that was the problem. But even the load right after the Affresh treatment leaves the white residue or does not get the clothes cleaned.This washing machine was close to $700.00, and I feel that for that amount of money, I should be able to expect clean clothes. I have never had a problem with a Whirlpool product before, so I had no qualms about purchasing this washing machine. At first, I thought maybe it just needed to get broken in, that it would stop leaving the residue after it had been used a few times. However, that has not been the case. I have tried everything I can think of to improve the performance of this washing machine, but nothing helps.When I contacted the local appliance store to complain, they suggested I cut back on the soap. I told them that I had tried that and it didnt work. They told me to use Affresh, I told them I did that. I asked them if they would take the washing machine back; let me trade it in for something else. I would even be willing to get a cheaper washing machine, I just wanted something that worked. They told me they couldnt do that. Even though I was still under warranty, unless it was broke, they couldnt do anything, and even then, all they could do would be to try to fix it. They couldnt take it back and give me a different washing machine.The experience I have had with this washing machine is the worst experience I have ever had with an appliance. I had always thought of Whirlpool as a trusted brand for appliances, but if this washing machine is any indication of how they now makes appliances, I will never buy another one of their shoddy products again; and you can guarantee I will be telling my friends, family, and coworkers not to buy Whirlpool products either.

Love the dishwasher, except the racking which has some top rack channels which are too small to be used by glasses, mugs, etc. The Power On/Off should automatically power down when the cycle is finished. Too often when someone leans against the dishwasher while opening the overhead cupboard, the dishwasher will start up because the unit was not powered down.

Where to begin? I bought Whirlpool Duet Front-Load Washing Machine about 11 months ago after my top load bearing went bad and start making a lot of noise after 8-9 years. 4 months ago (6 months from purchase) it started to act strange; washing machine will not unlock after a cycle, start throwing F3E1 error. Thats when I first called their support service. Their service technicians are very nice actually. They seem to be local small appliance shop, contacted out by Whirlpool, from my guess. Initial visit was to inform me that Im using WAY too much soap, while I was only using well below what was recommended by Whirlpool manual. RED FLAG #1. Technicians told me to stop using too much soap or start using POD. Also to flush my washing machine with 2 cups of white vinegar in hot cycle every few weeks. Ive changed my soap to Tide POD and starting flushing my washing machine immediately after he left my house. It was running OK, but I still saw F3E1 error at the end of every other cycle, until... thing went really bad one day, it simply stopped responding any command while clothes was still in the washing machine. I unplugged power cable and plug it back, it hums for 10 mins and in the end it was the same result. After several attempt, it finally unlocked itself, thus I could wash my clothes at my parents house. This is when I called support service 2nd time. The same technician came and this time, I had video recording of everything. He could not dismiss this with simple soap theory, so he opens up the washing machine and tells me that its due to bad control board. He proceeds to order new control board, which took a few weeks. New technician comes back with new control board and installs, runs a few test command (not full cycle) and leaves. During this whole time, Im left with no washing machine at home. Good thing I travel sometimes and laundry is done remotely sometimes. This repair didnt improve the situation much. I called them back for another appointment. Another technician comes back and tells me that Whirlpool sent back BAD control board. Now, Im really suspecting their product is really piece of **. At least at this point, I was still happy with their service. He leaves my house claiming that they will order new control board and re-install.A few days later, I receive a call from a lady, claiming that Whirlpool has instructed them to ask me to use different outlet, since they believe my outlet is causing issues. Now Im really pissed. Coming from electrical engineering background, I know theres always any chance, but they should double check this with their own technicians. Anyways, I perform their recommendation, which I knew was a shot in the dark. During this whole ordeal, Im working on a project that are out of state (CA). Not only do I have time to stay home for all these service visits, but Im not even home to test my washing machine. During one of the holiday, I was able to take a few days off. This is when I decided to take different approach. I went to the retailer, whom I purchased my washing machine from. They were also nice, but theres so much they can do.I called Whirlpool direct line to explain my situation, how unhappy I was, and to replace my washing machine. Their response was by the book: We can only execute our warranty policy and replacement is not part of warranty. The representative specialist had enough nerve to ask me why I have not called back in several weeks and continue to repeat it as if its my problem for not reporting back. I had spent 2 months of supports and 4 site visits, where I had to reschedule my work or take a day off, before travelling for projects after holiday seasons. This representative really took customer service to next level of hell. In the end Im without properly functioning washing machine for 4 months. I have to coordinate with my parents to use their washing machine when Im back home. My advice, you should really think 3 times before buying Whirlpool washing machine or any other appliance. Also consider that youre on your own, when their product malfunctions, and youll be sitting on dead appliances.

Bought this side by side, Whirlpool with ice maker and water dispenser in April 2013 at Home Depot. From the beginning, we have NEVER been able to get any chilled water out of the refrigerator. Sometimes the water is even warmer than the water out of the tap. Repeated attempts to fix and now Whirlpool tech Tom, told repairman, sorry this is normal, no refrigerator can guarantee temp of water.” Ive NEVER had a refrigerator with a water dispenser not chill the water much less, come out WARMER! HORRIBLE DESIGN & BAD COMPANY POLICY! Will NEVER buy another Whirlpool product!!! Now its dripping water inside fridge! Model #: WSF26C2EXW01 Ser#: HR30821156

Hello, Here is our story. We bought this refrigerator Whirlpool - 26.2 Cu. Ft. 4-Door French Door Refrigerator through a local reputable retailer. After 16 months we started to have problems with ice melting in the ice bin. We continued to have problems related to cooling/freezing within the refrigerator to the point where almost all the major parts were replaced. The good news is the dealer negotiated with Whirlpool to have all repair costs covered after the first visit. I asked about just getting us a new refrigerator and was told Whirlpool requires a part to be replaced 3 (THREE) TIMES before consideration.In summary, the refrigerator could not be fixed and was condemned in agreement with both Whirlpool and the Dealer. Here is the interesting news - since the refrigerator was out of warranty (12 months and now we are at 18 months), they are requiring we pay $600+ for the replacement. Buyer beware - either pay for the extended warranty or risk having to be inconvenienced by having your refrigerator unavailable for days or in our case, weeks!

The Whirlpool HE H2Low Washer is the worst piece of crap Ive ever wasted my money on! It leaves soap residue on all my dark clothes! DONT WASTE YOUR MONEY! Whirlpool should be ashamed of themselves for continue to sell these pieces of crap!

We purchased our brand new home ten years ago and we were thrilled it had a double wall oven unit that I had always dreamed of owning. Well, the first time I used the self-cleaning mode that dream became a nightmare! The oven was in cleaning mode and I was so happy as I had never had a self-cleaner before! When the cleaning was done, the door remained locked and the control panel was not working. After making sure it was cooled the next day, I called for warranty repair. They came out and fixed it and apologized for the inconvenience. I was thinking it was just a glitch and went on with life. Due to my husband’s business, we only live in the house part time as we do extensive traveling. My children are grown, so my cooking is mainly holidays and birthdays when we all get together. Since it is used so seldom, the need to clean is not as often as others might be. The next two times I cleaned it the same thing happened. The third time they came out they informed me that it was getting too hot in the cleaning mode and the steam was going into the computer panel and melting the electrical wire. They also said I would no longer be under warranty and from now on it would be my issue. The next two times I cleaned the oven, I did so the old fashioned way and skipped the self-cleaning. This week my oven started beeping and giving me a code and will not work. I called my trusted repair man and this is what I learned. The computer board is probably toasted. They no longer make the board, so he will have to send it out to be rebuilt. This will take 10 to 14 days and the cost will be somewhere in the neighborhood of $650.00! Are you kidding me?! How is this my issue? I have checked faithfully every few months, assuming that others are having the same issues, and that Whirlpool would be doing the right thing and recalling these ovens. Stupid me! This last time I had not even used the oven in three days and it still went out? I am old enough to remember when the first place you went to look for appliances was Whirlpool because they were good, they lasted and the company stood behind them. Oh, how the mighty have fallen. From now on they will be the last place I look! I’m not sure what is going to happen, but I can assure you I am not spending $650 to repair this piece of crap!

In June of 2010, I purchased a new Whirlpool Estate EED4400WQ0 dryer (serial number M01156261) with an accompanying washing machine. It has been in a clean, climate-controlled environment and gently used by my family of four for just short of two years. Last week, I began to notice that the clothes coming out of the dryer were cool and damp and it quickly became apparent that the dryer was only heating intermittently. This morning, the service person from the dealer who sold me the washer and dryer set (and a Whirlpool dishwasher a few months later) told me that contacts on the timer unit were bad and that the entire switch would have to be replaced. This is no small portion of the machine and the part alone will cost me about $150. After labor, we are looking at an expense of approximately half of the original cost of the machine - in less than two years. I called the Whirlpool’s customer service line to ask if there was anything that could be done and the answer was: Sorry, we cant do anything for you.” It is not acceptable to me for an appliance to become that expensive that fast. If Whirlpool cant do anything for me about this, then I will not be purchasing anymore Whirlpool products.

I had a perfectly good Kenmore range, but I didnt like the color. I purchased a Whirlpool 30-inch gas range at Lowes. I had problems immediately! The repairmen were at my house 6 times within the first year. My warranty expired and they wanted me to pay for an extended warranty. I refused to pay any more for this piece of junk! I fought with Whirlpool and demanded they either replace the range or reimburse me the full cost. They finally agreed, after many heated conversations, to replace or reimburse me as long as I promised not to purchase a Whirlpool product again. What kind of company would say that? A company that knows their product is defective and has poor customer service. I opted to take the new range that they promised wouldnt have the same problems. It is having the same issues as the original one. It shuts off in the middle of cooking and it is infuriating to say the least. I can promise Whirlpool I will never purchase a product from them ever again!

The Cabrio top load washing machine is a piece of junk, an expensive piece of junk. The only way someone could give this machine a good review is if they work for Whirlpool or they think beating clothes up against a rock in the filthy Ganges River makes them clean.We purchased the HE top loader because we were told that all the problems of the front loaders had been worked out in the new top loaders. What a joke. At least the front loader I had, cleaned the clothes. Since we got the glass top model, I made a movie that shows several items of clothes just sitting on top, not getting wet, not getting moved around, not getting rinsed; therefore, not getting clean.After the wash cycle spins down, the clothes are pinned up against the side and the rinse barely touches them before its final spin. We have several items that had stains left from the soap - yes, we used HE soap, Im not stupid. Never again will I waste my money on a Whirlpool product or anything from Best Buy.

We purchased a Whirlpool Cabrio washer brand new from Lowes. It did great for about 6 months when a terrible grinding noise started. Then it also would not spin dry the clothes - they would come out completely soaked. Repair guy came out and fixed it. Lasted for about 1 year - same thing again. Lasted about 1.5 years this time and now the loud grinding is back and my wife - who Ive heard cuss just a couple times in 20+ years - said, This ** thing sucks. The clothes are soaked. I cant stand this washing machine. So, Off we go to buy a new machine. Definitely not a Whirlpool though. Id give this machine 1 star because it does a decent job for a while but major repairs 3 times in five years is not what I deem an acceptable appliance.

I came back from vacation and found a sheet of ice at the bottom of my freezer, just like that lady from SC and some vegetables frozen in the vegetable bin; not very happy. Have not contacted anyone yet, but I’m very unhappy about this situation. This refrigerator is less than 2 years old; I’m afraid of putting anything in this unit as it is very undependable.

I purchased this range/electric (ygfe461lvq0) two years ago. It worked fine, but once about a year ago, the oven overheated and the breaker had to be turned off to stop it. No error codes were displayed. Year two, the oven broiler element stays on regardless if using bake or broil. Oven will go into runaway mode and breaker or cancel button has to be pushed to stop it from over heating. This range is a fire hazard and should be recalled regardless of what age it is. I called Whirlpool at Sears which recommended a tech who arrived to tell me that the control board is shot and for a price of around $400.00, it could be replaced. What is up with that? I had to pay for the expensive tech, also for 15 minutes of work. Sears says that I should have taken the extended warranty plan for around $160. Do I have to pay for an extended plan to have my house burned down due to a defect in manufacturing from Whirlpool? This is disgusting that a company can get away with crap like this. How do you people sleep at night?

My husband and I purchased a Whirlpool water heater from Lowes about three years ago. We have had trouble ever since! The pilot light will not stay lit. We have done everything imaginable to try to repair it. Every time I call Whirlpool, I get the same reply. They email me some instructions on how to repair this piece of crap. I dont understand how they can make a product that they do not stand behind. Whirlpool use to be a reputable company, not anymore! I will never buy another Whirlpool product ever! And I will tell everyone that I come in contact with not to buy from them either. I am also considering filing a lawsuit against them for making such junk! Do not buy Whirlpool water heater.

Purchased at Lowes and within days of installation the water would heat up so hot that it would spit and spew out of kitchen sink (10 away) and be so hot you couldnt hold your hand under it. Returned to Lowes and they reluctantly replaced it. I should have bought a different brand but I felt confident that it was just a faulty thermostat. Second one did the same. Tested different settings and it seemed to work ok but a few days later it was scalding hot again. Tech support kept telling me that water heaters are intended to be used or they are like a kettle of water sitting on a flame. I told them they were crazy to think a small pilot light could heat 40 gallons to scalding temp.Guess what? I left the heater on the pilot setting and with 40 fresh cold gallons in it. I returned 24 hours later to find it scalding hot again. I got down and looked through the view window and I couldnt believe the size of the pilot light. It is the biggest pilot light I have ever seen. It blows like a mini blow torch! And there is no adjustment. This is a serious engineering flaw and extremely dangerous. This heater is at my father-in-laws house and he probably doesnt use 5 or 10 gallons a day but still, NO WATER HEATER SHOULD EVER HEAT WATER TO A SCALDING TEMPERATURE WITH ONLY A PILOT LIGHT!!!

I bought this dishwasher in Nov. 2018 to replace one that was barely working. I have enjoyed using it much more than my old one. Its very quiet and does a great job of cleaning dishes, pans and silverware. The only problem we had was installing it. The leveling screws do not hold their height adjustment when the dishwasher is pushed across the floor during installation because the leveling screw pad was changed from steel to plastic and the tapped hole for the leveling screw is too loose. The effect of this - whereas the steel pad would slide the plastic pad will grab, turn and move the leveling screw out of adjustment. Especially if its tapped hole is too loose. So we went to Home Depot and bought 4 5/16 nuts and used them as lock nuts on the 4 leveling screws. This cost 50 cents. Once we installed it everything worked perfectly. It does take longer to complete a cycle than my old one - 3 hours vs. 2 but it uses less water and does a great job of cleaning. You must use a drying agent with your dish soap or it wont get dry enough. Also, if you use the short 1 hour wash it wont have as much time to dry and some dishes wont be completely dry. I usually wait to do a full wash with the normal cycle - 3 hour.

Let me just start by saying I have multiple Whirlpool appliances, and I have always bought Whirlpool appliances in the past. I bought a refrigerator 3 months ago, and it quit working. So, I called Whirlpool to come service it. The service repairman said someone left the freezer door open and it froze up. Two days later, I had to call them back again, because now, the fridge part was not keeping food cold. He came back out and told me it was the compressor. I then in return called Whirlpool that afternoon, and they refused to replace it saying they had to follow their Warranty Policy and they would call me back on Wednesday. They did call back on Wednesday and told me they had located the part. I got a call on Tuesday of the following week and was informed they could not locate the part. I called Whirlpool the next day, and they told me they would have to send it to their Exchange department for review and I would hear back from them in 3 business days. I asked for them to rush my request, but they told they have no way of doing that. I will never buy a Whirlpool product again!

We purchased a Whirlpool refrigerator on January 18th. It has never worked since it was delivered. A service call was place the next day. It is now 2 and half months and 6 technician visits later and the fridge is still not working. Whirlpool customer service has been contacted and they want to continue sending technicians out rather than replace the fridge. The customer service manager, Demetrius, stated the additional service calls are not costing Whirlpool more money because the repair company has 90 days to fix the problem so they are not going to replace the fridge. While this may be fine for Whirlpool it is certainly not good customer service. We were told they cant call the service company to get the details of prior visits and that we need to call the service company as there is nothing Whirlpool customer service can do but schedule technician visits. After a lot of aggravation, losing hundreds of dollars of food and hours on the phone here we are without a working fridge. Buyer beware!

My hot water tank wont stay lit. I replaced the heating element, and the thermo couple. It will light up now but it only stays on for about 10 minutes.

We purchased a Whirlpool Range from Brands Mart USA and did not try to use it for quite some time because our house was not ready to move in. When we tried to turn on the oven it would not come on. We called a repair service and was told the Motherboard was not working. We realize the warranty was out on the stove but it never worked and the stove is Brand New. We called Whirlpool and they was going to repair and changed their mind on December 18, 2014 at 8:54 am. Before that call we had spent quite a lot of hours on the phone with Whirlpool and Brands Mart USA.. We purchased three appliances from Brands Mart USA Range, Dishwasher and Microwave at the same time they were all Whirlpool products. What happened to Good Customer Service and Return Customers for Job Security? Well neither Company care for their customers. We did not break a motherboard for a stove oven because the range was never turned on because it was broken when purchased.. We are unable to get any help from either company. I talked today to ** & Supervisor ** from-Whirlpool and ** - Brands Mart USA, again no help. Why transfer you from one company to another for 1 hour and 45 minutes? WISH I COULD GET SOME HELP. And we wonder why companies go out of business - word of mouth complaints and especially with Senior Citizens like us.

Wish we had gone online to check all the complaints otherwise we would have NEVER bought a Whirlpool model #EB9FVHLVS. Only 3 years old. First repair call to fix a manufacturers faulty grommet manifested by leaking in the bottom freezer portion. Just outside the warranty - did not purchase extended. Now I know why retailers recommend the extended. My sister overheard the repairman call in the product to his contact at Platinum Appliance Service Inc., and he made direct reference to the model number in the category of Whirlpool products known to have this specific design flaw, and that the product was never recalled but customers were directed to purchase a repair kit to fix the problem. Apparently this became a very well documented and repeated incident within the 1-2 year purchase date of these products and models with the known factory installed defect were still sent out to retailers at a reduced cost with no reference, warning or attention to the factory defect. Now 4 months after the first call we have to call in for another repair issue because our light in both compartments and the motor shuts off for hours at a time. We lost about $80 in meat products, so now were afraid to keep any costly items in the freezer because we cant afford to replace a $100 of thawed products every week on top of groceries already bought!!! It seems as though Whirlpool is gleefully generating business for appliance repair while making more than one hole in the consumers wallet.

We bought our Terrorpool Whirlpool refrigerator in 2006. We have had problems with the ice dispenser, bad motor replacement, and now we have cracks all down the right inside wall. I had bought an extended warranty of four years at the time of purchase which covered the cost of the previous problems. But it has now expired, and I was told it would be my expense for repair. What happened to reliable appliances that our parents and grandparents had? What happened to the name Whirlpool? I will never buy a Whirlpool product again, not to mention the customer service (which I wont mention). If you have model # ED5PHEXRQ00, please write about any problems you have had and help someone else not make the same mistake.

I have had to replace my Whirlpool 50-gallon hot water heater 2 times. First time it broke, it caused thousands of dollars’ worth of damages plus Im out a $760.00 deductible. I had the last one just over 1 month and couldnt exchange it at Lowe’s because it’s a few days over a month. So I had to get return authorization before I could return it again. I went through speaking to a hateful CSR. After calling back again, the lady, a real nice lady, helped me. I will never buy another Whirlpool product again, and if anyone is smart, they will stay away from them too. Hateful, hateful CSR. Beware.

We purchased a Whirlpool side by side from Lowes and an extended warranty. Immediately maybe a month the ice maker froze. Ice container in the door. Repairman said design is notorious for this problem. This was an ongoing problem. They replaced icemaker and it continued. Finally the warranty people told me it could be deemed a lemon if repaired for the same issue 4 times in a year. They deemed it a LEMON and I received a store credit for the purchase price less the warranty amount. I purchased a new LG French door. No issues and its been 5 years. If you have an extended warranty do some checking on the lemon.

The 12 year warranty, means nothing. The heater only worked for 30 months, and then its upper sensor fault code flashes, and the heater shut down. I called Whirlpool, and they have me use an ohm meter to help troubleshoot the problem. So if you are not handy, you are out of luck. They decided it was my control unit that is defective. They will send me the part free, but I have to pay shipping and installation. What a deal, and what kind of management would dream up of this. The heater is marketed as a 12 year warranty model (only on the tank). Would anyone, having been through this, buy another Whirlpool product?

I am not pleased with my self-cleaning oven. I dont even use my oven that often and I cannot get off even the simplest of stains on the sides, top, and bottom. I have tried to clean the oven three times and the stains from pie drippings are still not coming clean. It should not be this hard to clean an oven because my last oven was so much better and it was not Aqualift. The top of the oven is also very hard to keep the burners clean and looking like new. I am very disappointed in this oven and believe that this is false advertisement to the consumers. I pride myself in keeping my kitchen looking clean but this just is not working for me!

I bought a Whirlpool top loading washing machine with dryer on top, model # WGT4027EWo, last August, not even 3 months old and noticed the lint was not coming off the clothes. We tried cleaning out the washing machine with vinegar, wiping down the sides, using smaller loads and even used the gentle cycle. Nothing helped. We have had 2 different repair men out and they said there is nothing wrong with the washing machine and to put the clothes in the dryer and use fabric softener. I have never had to use fabric softener in my washing machine to get my clothes clean. When reaching out to customer service, I have spent over 2 hours and no satisfaction. They state that the technicians say there is nothing wrong with the machine. I was told by both of the technicians that they removed the lint trap from this machine, but no one is taking responsibility. My whites have blue lint and my darks have white lint, so too strong an agitation, as suggested by one repairmen is completely wrong! What to do when you spend over $1,000 on a washer/dryer combo and they dont work correctly and Whirlpool doesnt stand behind their product? Honestly, I will never buy another product from this company, and I 60 y/o and never made a complaint before about a appliance in my life!!! I dont even think I can give them 1 star! DO NOT BUY WHIRLPOOL - CUSTOMER SERVICE IS HORRIBLE!!!

I purchased a Whirlpool oven and stove from hhgregg. The refrigerator is at best OK. The stovetop is easily scratched and looks horrendous after just a few months. Cooking controls are far too high for slow cooking. Customer service is terrible. Avoid, purchase another brand. You will be much more satisfied.

I purchased a Whirlpool Duet washer from a local appliance store in May 2009. I also purchased a 60-month extended warranty covering the washer until May 2015. I was shocked when I tried to use the washer today (May 16, 2012) and it would not turn on. I called the repair facility the appliance store supplied as the warranty repair facility, only to be shocked again. I was told the appliance store suddenly went out of business and my ($130) extended warranty was no longer in effect and I would have to pay for repair out of my pocket. I then called Whirlpool knowing they would stand behind their faulty $740, 3-year old washer. They told me there was nothing they could do because the one year warranty they offered was over. I had a repair person look at the washer and he told me a control board had to be replaced and the repair would cost at least $550. I told him I was just going to buy a new washer. I had not been happy with the washer from day one and was very sorry I had purchased it. It did not wash the clothes very well. Also, I had a musty/moldy smell in my basement that would not go away no matter how much I cleaned. The repairman told me today that the smell is coming from the washer. I just cant believe I am out almost $1,000 and there is nothing I can do about it. After reading the many reviews on this website about Whirlpool appliances, I am sure they will not be in business much longer. They should be ashamed of themselves for what they are doing to consumers like myself especially in todays economy. Is there anything that can be done about this?

I had my washing machine for about 10 days before it stopped working. I did about 4 loads of laundry. We have had 3 repair people come check it out, all referred by Whirlpool. They each had a different theory on why it wasnt working properly. Im now waiting for parts to be delivered and then service to be scheduled. When I contacted customer service, I was told (after waiting on hold for about 1 hour) that it was customer misuse. Ahem, first I heard that, and I think I know how to use a washing machine. I asked to speak with a supervisor. More waiting. Tina (#**) told me she will contact the service company about the parts. I told her to please conference me in on the call because I want to hear the outcome (and I dont want to wait another 1+ hour to reach customer service again). She put me on hold and then disconnected me! Really, all this time and 3 service people... Would be cheaper to just replace the machine altogether. What a headache!

I have Whirlpool 25 in. Side by side. I love the space freezer size is bigger than the old one I had. Makes ice as it should. Overall solid appliance that I trust. I purchased this refrigerator a year ago after research.

Ive spent more repairing this washer than what I paid for it new!!! Its really ridiculous that Whirlpool isnt more responsible for their equipment that doesnt stand up to their name! Ive replaced more things than I want to type but just to start the computer board, pump, bearings just to name a few. Each time I had my repairman out it was a minimum of $300 to repair. Ive had my repairman out 5 times to repair things. Thinking each time its cheaper to fix it than buy another which I surely didnt think I would be repairing it several time! At this point Im just sick to death that a washer that is for a home of myself and my daughter has broken down so much. I cant imagine what a family would go through. Even after all the repairs it still isnt right but Im done sinking money into this sinking ship of a washer! Its loud constantly stops due to un level so I have to move the clothes around usually having to repeat this several times before I can get the load to finish!!! Then they come out wrinkled more than they went in and I have to iron clothes. A person should NOT need to iron! May as well wash them in the river on a rock. It would be easier!!! SO DISAPPOINTED!!!

The stainless steel refrigerator door is rusting after only 5 months and the company respond it is cosmetic and we the customer have to live with it.... They will send a cleaning product which didnt remove the rust. Review that was written on the company facebook page wasnt published because it didnt meet the company website guideline. Its disappointing and frustrating to realize that we have to go through it. Not happy with customer service.

Our experience with the Whirlpool Duet Steam washer is the same. Weve had ours about 2 years and have replaced a sensor and the rubber boot (both in the first year) and now we too have had the bearings go out. Weve called Nebraska Furniture Mart and Whirlpool. No one really cares. Its unbelievable that $1800 is down the drain and its acceptable! What are the steps for a class action lawsuit? How about getting some social media involved to get Whirlpools attention? It worked with Netflix and Bank of America. They had to finally listen to the public. So frustrated!

The control knob broke off the washer when it was only two years old. I contacted Whirlpool by email about what happened with the dryer. The control panel is held tight to the dryer now with duct tape and the knob is held on also with duct tape. The knob doesnt work. It is stuck on timed dry so I can at least use it and adjust the time. I cannot use any other setting. It would cost about the amount of the dryer to have it repaired. The customer representative informed me that sometimes things dont last. Im glad for his profound wisdom, but Im stuck with a dryer held together with duct tape. I was offered an extended warranty, but the cost of repair will be nearly the amount of a new dryer. I will seek a different brand in the future.

I bought a Whirlpool Cabrio washer and dryer on March 2010 from Leons under the dont pay for 18 months. It took 2 months for me to receive it. I thought it was a great washing machine. I made my last payment on July 2011.On the first week of August, the machine stopped working. The F 51 code appeared. I then looked up the code. I also looked up complaints. I called Whirlpool customer service and was told it would be $81.00 per hour for service plus parts. I asked why there are so many complaints about this machine, and after spending a good amount of money on what I believed was a good make of washing machine, I could not believe that they would expect a customer to then turn around and fork out that kind of money for repair.I was told that the one year warranty has expired, so it is my responsibility to pay. I am a widow with 2 children, working 7 days a week to pay my regular bills and now they expect me to pay for repairs on a washing machine that is only 15 months old. Thanks Whirlpool. I will be sure to tell everyone not to purchase Whirlpool products and thanks to my neighbors for letting me use their washing machine because I cant afford to fix mine.

We purchased 4.0 cu. ft. Cabrio Top Load Washer with 6th Sense Technology MODEL WTW7340XW2 on 11/20/2011. We are a small family of 3 so use of the machine is light. We noticed a strange sound and some leaks a week ago and called in a technician recommended on the Whirlpool website. To our horror he informed us that we need to replace the tub bearing assembly, rotor and stator - to a cost of $1095! This machine is not even 3 years old. Did we buy a lemon? I called Whirlpool. They were simply not interested. The online chat person sent me to the Whirlpool Customer Experience Team where I was told that I should buy an insurance plan to cover the costs of repairs. They then sent me on to the insurance department who want me to pay $338 to buy a repair plan to have the machine fixed. And then referred me to the Manufacturing division when I wanted to know how to escalate the problem - and if you call that number - there is no option to deal with problems - seriously?!? Is this what I should expect when buying the Whirlpool brand?

My mother purchased a Whirlpool gas stove. When the stove arrived the door didnt shut properly. We were told to contact Whirlpool. They sent a repair person out who said that you have to use the stove a few times first and then the door would close. Meanwhile, I had a 2-inch gap and gas and heat escaping. I called and requested another company to come out and check it. No one called back. I called again and they sent out the same repair guy. Apparently hes the only one in the whole Charlotte metro area that can service Whirlpool. Again he said I had to use it more. I called again and requested a different repair person to come out. They promised to send out a lead. When the company called to confirm the appointment they said no one told them that. They finally sent out a different person. That person said absolutely the door was dented. He offered to replace the door. He then came back and said the door comes in too many pieces and he didnt want to put it together so I should contact the store I bought it from and see if they would replace it. Whirlpool refused to repair it. I was able to get the store to replace it after explaining to them the problems with the warranty service. I filed a complaint with the BBB and they lied and said they tried to contact me which never happened. When I called the executive office I was told that I was the problem and that it was resolved so leave them alone. I regret my purchase of my appliances and now have no one to stand by the warranty.

I love this stove! It is nearly perfect. I wish it was easier to clean the glasstop, but I imagine that comes with any glasstop stove. The stove is easy to use, and I love the cooktime option. My only complaint is that the timer is very quiet, and when it is a timer while something is cooking, it only beeps once. If its a timer when nothing is cooking then it will go off repeatedly until you turn off the timer.

I bought this fridge 2 years ago. I had multiple repairs already. Now the side panel makes noise when you shut the door. Repairman told me it is the foam separating from the side panel. There is nothing that can be done. I also have extended warranty.

I have a Whirlpool built-in double oven. It is 7 years old. The top oven has overheated 3 times with food in it and it locks the door. The oven beeps and says, Too hot, and locks the door. Luckily I was in the kitchen when it overheated, so I could turn the oven off. After turning the oven off, the oven has to cool off before the door will unlock and the food can be taken out. By then, the food is really burnt.I called Whirlpool to see if there is a recall and they said, No recall, and the oven was out of warranty. So I called the repair shop. They said it was the control board and they were not sure they could get a new control board. I may have to find someone that can rebuild this control board. They said not to use the oven. It could cause a fire. I would think that they should recall these ovens. They should have a safety switch that shuts the oven off if it overheats like mine has done.

Purchased this Dishwasher on Feb. 28, 2015. In June 2016 about a 2 by 3 inch section of the enamel face on the door rusted and fell off above the air vent. After three hours of hold time between Lowes (with the extended warranty) and Whirlpool (their warranty department) it was determined that this was not covered by either warranty as it was beyond the date of the 1-year mfg warranty and was not covered by the extended warranty (it was only a cosmetic issue). As these calls took place over a matter of 2 days, it was interesting that between day 1 and day 2, Whirlpool had issued a statement that no rust repairs would be covered under any warranty repair - regardless, unless it affects the functionality of the dishwasher. In other words, they KNOW this is an issue with this model and are doing nothing to fix the problem. I must say that the folks at Lowes were most helpful; cannot say the same for the folks at Whirlpool. I do not think I will trust their products again.

I bought a Whirlpool gold model #GB2F-1DXW507 / k27711376 when we remodeled our kitchen in October 2012. After a couple months I noticed water on my floor, then in the bottom of the freezer. I called Lowe’s. They sent out a repairman. He said it was a flaw in the design and put the redesigned part in. When they delivered the fridge they changed the door to a left hand open and it was never right. After 2 years the ice maker stopped working. I just started buying ice. Today 5 years and 5 months later they said it will cost me almost $500.00 to fix the electric board and the Ice maker. The fridge stopped working would not get cold. And the certified Whirlpool repairman said it was a very good looking fridge and he would fix it with a 90 day warranty on the genuine Whirlpool parts for almost $500.00. I said I wasnt a idiot. Why would I spend that kind of money for JUNK. After reading some reviews I think Whirlpool knows just what junk they are selling. I called and all they said was, “Thats too bad. We will take it under advisement.” I bought mine 1st then 1 year later my sister and sister-in-law bought theirs. 3 fridges with all the same leaking issues. I hope they dont end up with all the same problems.

I did not purchase the washer (Cabrio Top Load Clothes Washer) but inherited it in a home sale. Never had a non agitator. I was excited for this new washer. After a week I knew why they left it! My clothes did not seem clean; stains were still on them, when I used the delicate cycle a pair of pants went in folded and came out folded!!! I also would have to redistribute the clothes every time I had a load that was larger than five pieces, because it would stop. I would actually have to take clothes out and spin what was remaining then put those in the dryer and put the other clothes back in and spin those again. I was told I needed to use OxiClean on top of my normal detergent in order to get my clothes clean. Never again will I purchase a Whirlpool. Just bought an LG; fingers crossed.

I have had this range since 2008 and used the self-clean last week. (I dont use the oven that often) Since the clean it has not heated up to required temp. I just called Whirlpool and a tech is coming out this Friday (Nov. 15th 2013). If it is determined to be the self-clean that did in fact cause this, the tech calls for an authorization and the repair is covered by Whirlpool. I will report back what happens.

I cannot adequately express my dissatisfaction with the Cabrio washer and dryer that I purchased couple years ago. I will never buy a Whirlpool product again. That includes Maytag; Kenmore; or Amana products. I have had nothing but problems from the start. The washer sounds like jet engine taking off in the spin cycle. I found out the washer needs new tub bearings ~ $200. The washer is tearing up towels during the wash cycle not sure what the cause is.My washer will only wash clothes in certain cycles (bulk). I keep getting error codes in normal or other cycles. The washer takes long time to fill so it times out during fill cycle. I replaced fill lines and checked for blockage, everything was clear. The washer probably needs either new motherboard or water inlet valve. Not sure which, maybe both? It is impossible to wash a load of clothes without getting the UL unbalanced load indicator. I also have problems balancing the load. I have taken wet clothes out and put them back in with no luck. It takes hours for a load to finally wash.The dryer has had its problems. I just replaced the belt tensioner on the dryer because it was making a terrible screeching sound. The noise was very annoying. I am very disappointed with quality of Whirlpool products. However, don’t worry about improving customer relations because I will never buy a Whirlpool product again. P. S. How come you have not issued product recall? There are 1,000s of similar complaints concerning the Cabrio washer. Frustrated customer.

I am extremely dissatisfied with my Whirlpool refrigerator. After less than two years, the entire cooling system has gone out basically rendering it a piece of trash. Unfortunately, Whirlpool is only going to absorb the cost of parts, so I still have to shell out $4500 to have a refrigerator repaired that is nearly new. This is not acceptable. I will never purchase a Whirlpool appliance again.

We purchased our Whirlpool Refrigerator, oven, and microwave a little more than a year ago. Not a single negative event with any of these products and my wife and I wholeheartedly recommend Whirlpool for operation and last ability, unlike the products we replaced them with.

I have had this Cabrio washer and dryer for two years now and I would do better washing my things by hand. Save water, sure there is none!! I have a glass lid and I actually stood there and watched a cycle and the clothes on top never even got wet!! My whites are now gray!! Called the company to get nowhere. I am going to buy an old-fashioned washer that actually uses water. I tried to be eco-friendly but I dont like dirty clothes!!

My Duet Sport washer drum is damaged due to the poor quality of the bearings. I replaced the Whirlpool Duet Front Loader Washer Bearing & Seal Kit W10253866, W10253856 but because the bearings were damaged the drum is also damaged. When I opened the rear panel of the washer the bearings had literally come apart and bearings fell out. All of the floor and the oil/grease was everywhere. I replaced the bearings but it didnt matter because the drum is warped. Priced the drum and it is nearly $400.00 to replace the assembly. The cost of the drum assembly is about half the cost of a new washer. I will never buy another Whirlpool product again. Just a shame that the cost of a replacement drum is so high. What caused the bearings to just explode and damage the drum. What did I do to cause this? Absolutely nothing. I have since discovered that this is has happened to scores of people with this same washer.

Whirlpool Gold Microwave Hood Combo GH5184XPS4 purchased new on 12/2009. The plastic vent cracked where clip attached by factory installed screw. The vent fell off microwave on 10/2011. I spoke with Whirlpool customer service. It is out of warranty and recommended to buy new vent part ($40.00). The new vent broke once again on 12/2011, clip attachment location. Now, the plastic door handle is cracking. The customer service is sorry and recommends to buy replacement parts as long as they remain available. There are many reports of similar instances noted online. I live in a newly constructed condominium where multiple owners have had the same problems with their Whirlpool Gold Microwave Hood Combo GH5184XPS4.