I have a new Duet Washer and it is a nightmare. It keeps throwing the same F8 E1 code. The repair people have replaced five parts and been out four times. I feel like I have been scammed out of $900. I will never purchase a Whirlpool again ever!

The front of our Whirlpool washing machine started to rust in one place at the bottom within six years. Now it has broken out in three of four places on the front. We are very dissatisfied with machine and will never buy one again.

The W/D combo-Cabrio is crap... Dont buy it. Salesperson @ Lowes told us all washers moving away from the agitator to ones like this so we bought it. The washers does not clean everything - does not use enough water to clean - leaves your delicates so wrinkled and clothes in general beat up. The dryer decides when it thinks your clothes are dry when they are actually still very wet... very noisy. Whirlpool must have sold out because quality integrity sure is gone.

In my wildest dreams I wouldnt have expected that changing a burned out light bulb on a 7 month old microwave would put us out of commission for over a month. Its been 30 days now and Im told it will be more than 2 weeks before the part comes back in stock. Whirlpool had such a good reputation years ago, but thats history. This is a disgrace.

Very reliable and cleans clothes very well. I have used almost every machine on the market, and none compare. Very quiet and I use very little detergent and CLOTHES come out very clean every time. I am just very satisfied with my experience.

As very happy owners of a previous model of this fridge freezer when ours needed replacing, we went direct to Whirlpool and bought the latest model. What a mistake! Other comments on this site are so accurate if only we had seen them before. A kitchen floor covered in ice mush (cubes seem out of the question) and tepid water from the water dispenser whereas on the previous model it was chilled. Basic functions that the previous model excelled at. Sadly it is also badly designed inside the fridge. We raised these issues with Whirlpool within our first year who merely said sorry you are unhappy and thanks for your comments. Be very wary of Whirlpool products and service.

Less than 3.5 years use on a 2015 Whirlpool dishwasher...total costs to repair would be $600. This just to let other know. Whirlpool did nothing for me when the same issue showed 15 months after purchase and again 18 months later. Absolutely horrible experience. I dont want them to contact me and I post this as a warning to others. They just want to sell you high priced service contracts. Terrible dishwasher and even worse customer service.

Whirlpool Duet Sport W & D purchased from Costco in mid 2007 for $1600. Costco gives an additional one year warranty, totaling three years. Both have worked exceptionally, I must say -- clothes come much much cleaner, keep their color, and last much longer vs. top loaders (Im sure the water softener helps). Two separate techs just confirmed the circuit boards went on the washer ($450 with labor) to replace. Washer looks brand new, but now will be going to the curb.

We purchased a new bottom freezer Whirlpool refrigerator 4 years ago. For the past year we have had problems with the freezer frosting up. An appliance repairman told us the seal needed replacing. This was done with no success. He states there is nothing he can do for it. The refrigerator runs all the time and the freezer is unusable.

Aqualift technology does not work!! This is absolutely the worst product I have purchased from Whirlpool. The aqualift technology DOES not clean the oven, even if you clean the oven after EACH time you use it! I am not able to bend over and spend the afternoon in the oven. And even when I do, I cannot get this oven clean!!! Please DO NOT buy a Whirlpool stove with an aqualift technology oven cleaning process!!! You WILL be sorry!!!

I installed this Whirlpool Gold Series oven in December just before Christmas. I cooked a 9lbs Turkey for over 4hrs at 350 degrees (it should have only taken 21/2 hrs at 325) used a thermometer to test the temp. Well the breast part was fine but later in the evening I removed the entire turkey only to find that the legs, thighs and bottom of the turkey was still RAW. Lucky no one had asked for that part of the turkey. Next I tried a small prime rib roast. Same thing happened. The top of the roast was fine and the bottom was RAW. I dont dare cook anything in the oven now. Called whirlpool and they are going to send someone to look at it but I wont hold my breath for any results. After reading the same complaint on several reviews and the TV show Marketplace it seems to be pretty standard for this product.

I bought the HE Whirlpool Cabrio 2 years ago. It has all the bells and whistles, fancy cycles, etc. but doesnt clean ANYTHING. I have to wash three times to get things clean... So much for energy efficiency. It also gets out of balance with larger loads. What a waste of money and time.

I purchased a Whirlpool WTW6600SW in January 2010. I dont normally purchase an extended warranty, but it was a fairly expensive washer. So I did. In July 2011, water starts gushing all over the floor. After my first visit to see what is wrong, I ordered a part. I was out of a washer for 2 weeks. Then in August 2012 the same thing happened. This time the repairman didnt get the part on properly, so they had to come back a third time. I am out of a washer for about 3 weeks. Now, October 2012, it is doing the same thing again! Customer service tells me it has to be repaired for the same problem four times in the same 12 months in order to receive any replacement value. It will have to break two more times! This washer is a piece of junk!

I bought a new Whirlpool electric range in the spring of 2008 and purchased the extended warranty from Leons. The oven worked fine for the first three & 1/2 years, but then the bottom element in the oven seemed to have stopped working. The top element would still come on, in an effort to keep the oven at temperature, but was not effective.I called in a repair. The technician showed up, turned the oven on, noted that the bottom element did not come on properly & replaced the motherboard in the control panel with no further diagnosis. The oven worked for approximately 9 months and then the problem recurred. I called in another warranty repair. This time when the technician showed up, he turned the oven on & told me he was going to order a new bottom element, which he installed about a week later, again, with no further diagnosis.Now, here we are again, one month off warranty and 6 mos since the last repair, and again, the bottom element in the oven is not working correctly. I reported the issue & my dissatisfaction to Whirlpool and was basically told, How sad, too bad - hardware components fail and theres nothing we are going to do about it. Seriously? This range is just barely 5 years old and has a history of repeated problems with the bake function - obviously, something is defective in this product.I can see it, if I had not had any problems until this point, but when the same issue keeps coming up & obviously has not been correctly diagnosed and repaired, I would think they would have enough integrity to offer some kind of help or solution. Given the history here, its highly unlikely that Im going to be willing to spend big bucks on another attempted repair that, in all likelihood, will be merely a short term band-aid, so Ill probably have to buy another new range - which I cant really afford right now. Trust me, it will not be a Whirlpool & it will not be from Leons.

My refrigerator is about 7 years old. Has performed great. Good use of room inside. Easy to clean. Bought only Whirlpool products for years however since the last purchase of a range a couple years ago the quality was greatly diminished. May be changing brands now.

Ive had so many problems with this washer. Everything has been replaced on the machine and it is still a failure! It has overflowed 5+ times. Stopped draining 4 times (fun getting water out of it...). Have been without a washer for a total of two months! My In-Laws have the same and theirs hasnt been a problem (however it isnt used as much as mine.). Hopefully mine is just a Lemon! Ill never buy another one!!!!! Especially from Lowes. They deem it only a lemon if it has had the same issue for 4-5 times. That is with the extended warranty! TO THE DUMP IT GOES!

Whirlpool Cabrio washing machine - We purchased the (best name brand) from Get It Now and all we ever had was problems. We will fill the washer 1/2 full of clothes and the clothes on top would not even get wet. So we have to do it again, to make sure the rest of the clothes were washed. Many times there was white smudge marks on the clothes, sorta like powder (we use only liquid soap that you recommend). Today I washed a child’s bedspread for the 4th time because the stains would not come out (from a cookie). I had to turn the bedspread twice just to get it wet. I used bulk load and heavy duty load and it doesnt work. Your product is a very big disappointment for the price a person has to pay. I will recommend that no one purchase this product. Your people need to do further research on who this machine cleans clothes.

Bought a Whirlpool refrigerator at Home Depot in 2018. It has been a $3,000 piece of junk!! Customer service is garbage!!! They refuse to address a persistent problem since the day we bought it. Do yourself a favor and buy another brand!!

WTW4950XW2 - I purchased My whirlpool washing machine wtw4950xw2 from best buy in 03/30 2013 and it just stop working after 3 yrs. The manufacture warranty was only good for 1 year. I think companies does that on purpose because they know these new equipments are not going to last. I think before they use to have at least a 3 yr or better warranty on appliances. First it started making this loud sound when on the spin cycle, so I had a repair guy come out. He told me that the bearings needed replaced so (how does bearings goes out in 3 yrs). I asked how much will it be to replace parts/labor. The Parts cost $250 and the labor is $200. I might as well buy a new washing machine. I am so disgusted with this machine. My previous Whirlpool, which was not the new modernized, I had for at least 12 years and also I bought a whirlpool dryer. My Dryer stills works after 15 yrs. Im going to try to hold on to the dryer until the long haul. I wish I just would have gotten my old washing machine fixed. Now Im looking for a new washer and I wont be doing a whirlpool or anything with a push to start - just a plain old agitator, no sensing mechanism, just basic.

My Whirlpool is reliable, however it does not have a soaking cycle which I would enjoy having. It also has an unbalancing problem when speeding if I attempt to wash heavy loads on the extra large load cycle. However, it responds very well on large loads for heavy washing. Shortly after I got it the timing had to be replaced, but no problems since then. Overall pound for pound for the dollar it is a good machine.

Disappointed with Whirlpool Gold bottom freezer GX2SHBXVY05. We purchase this refrigerator in December 2010 thinking we were buying a good quality french door fridge. It didnt take long before problems started with the freezer over freezing and the fridge not cooling. We also had a problem with water pooling on the bottom of the freezer then freezing into a solid piece of ice. Water eventually started pooling on the kitchen floor and living room carpet. We did not purchase the extended warranty believing we shouldnt have had to as we were believing a good name brand. After having a repair person in twice we were told we needed a new computer board and switch. Total cost for repair $350.00 plus previous charges, so far adding up to over $450.00. We called Whirlpool customer service, was a waste of time as they simply told me they could send out their own repair person to obtain the same diagnosis I already had. They told me I should have purchased the warranty. I told them I shouldnt have needed to. Whirlpool customer service refused to do anything for me as it was too long past the 1 year limited warranty. Doing my own research I found this to be a problem with a great many Whirlpool fridge owners and I mentioned this to their customer service and mentioned there should be a recall. I will no longer purchased another Whirlpool product as the company does not stand behind their product.

This is a freezer on top unit. Purchased in 2015, unit quit cooling, started making a roaring noise. Called local technician, he added 2 oz of Freon, said he has seen many of these same unit losing Freon. Technician said line that goes to compressor is copper and hooks up to aluminum line before attaching to compressor. This is leak point for freon; no way to know when the leak started, but freon almost gone and cost to pressure check for source of leak is costly and probably would not repair problem. Got 6 yrs out of it and I am replacing with another brand. Will never buy Whirlpool again. Should have got 10-12 yrs of use. Do not buy this unit. Wrote Whirlpool first, but no help. Indicated this could be a problem with these units but no recall so I am on my own. Out $900 for a new refrigerator. Big hassle. Unit no good.

Thank you EPA for requiring water limits on manufactures of washing machines. As a result, I am forced to use the deep water and extra rinse functions to get clothes half way clean. So much for saving water! This Whirlpool Cabrio machine cost way too much for such lousy results. Additionally, I have to purchase a special product and clean my machine every month or two. Ridiculous!! I yearn for the old days when I could wash my clothes and they would actually come out clean.

I purchased a Whirlpool duet, model #wfw9550ww00, two years ago with added warranty. The machine stops mid-cycle. The time remaining flashes but no error code. Pressing start would begin the machine again. Sometimes, we could go several loads with no problems and other times it will stop three or four times in one load. Occasionally, pressing start would not work and the machine would require unplugging and restarting. We have had several service calls in. They have said it was the pump, then it was the motor, then it was the pressure switch, and yet the problem persists. They are due to come out again tomorrow for yet another examination to determine its cause. Its the third time in one month. Its a lemon.

I bought a new Whirlpool gas hot water 40 gal tank from Lowes. I Installed it, but the pilot light would not light. So Cal Gas Co came out and said they did not like the new design, but that was how they were now making them. Gas is shot out from a pipe into the tank, however its fairly open. The pilot ignitor is similar to the one on barbarques that often do not last. You cannot get to it to light it manually. Several calls were made to Whirlpool and they sent a repair man out to fix it. You can imagine buying a new hot water heater and having it work part time. The repair man explained that the unit needed a new thermopile, but he could not put one on until whirlpool authorized it, which they would not. After a rather heated conversation with whirlpool they agreed to FedEx a part overnight. Of course the repairman could not wait for me to call and had to come back again. The pilot light still does not stay lit, and Whirlpool now wants to talk about how the tank is vented. This has nothing to do with the pilot light, nor did putting in a new 1/2 gas line and valve as per Whirlpools request. Whirlpool has a problem and they refuse to acknowledge it. However, it is Lowes that chose to buy from whirlpool and they do little if anything to stand behind their product and gain consumer confidence. My suggestion would be dont buy whirlpool, and shop at Home Depot.

Cabrio WTW8200YWO - We purchased this washer five years ago. About a year ago it started getting noisier and noisier on spin cycle. Now it sounds like a jumbo jet taking off. A Google search quickly revealed this is a ubiquitous problem with these washers. As we are in our 70s and dont have kids at home, we are very light users of the washer. First, I would suggest that no one buy this washer. Second, I suggest that Whirlpool should recall these washers. I called Whirlpool and it turns out they clearly know about this issue. The good news is they will offer you a discount on repairs or even on a new machine. The bad news is it will still cost you several hundred dollars to fix their design defect. I suggest that you avoid purchasing Whirlpool products both because of their defective design and because of Whirlpools unwillingness to take responsibility for these problems.

I have a Whirlpool AccuBake gas range. I started by contacting my local repairman because my stove was out of warranty. The first company came out 3 times and replaced three parts, which didnt work. The cost was $297.00. I originally paid $598.00 for the stove. After they deemed it non-repairable, I contacted Whirlpool. They basically said it was my fault for not buying the warranty. I then contacted the BBB. Anne ** from Whirlpool contacted me and had another Whirlpool service tech come out at no charge to me. But guess what, they deemed it non-repairable too. Its a shame that companies no longer stand behind their product. Its very apparent that this is a manufacturers defect. They should replace the stove.

We purchased a Whirlpool (gas) range with double oven, in April of this year. We found that the upper oven over heats, on the right side, and therefore burns or bakes unevenly.The repair company will be out for the fourth time tomorrow. They have been very nice to deal with, but really have not been able to repair or come up with any definitive plan of repair action.

Whirlpool Cabrio - This expensive machine should be called the Presidential. First it spins, spins, spins. It sprays tiny amounts of water, so little, that there is 2 inches or less. There isnt enough water to cover the clothes so no agitator to stir and mix them. There are ridges on the bottom of the tub called aggrivators to twist everything into pretzels. This twisting spreads the dirt around, but does NOT remove it, the utter lack of water giving it no where to go. I use a hose to add extra water, and I hand soap dirty spots. I stop the washer frequently to hand rub and slop the clothes around and un-twist them. Explain to me how running this machine 3 times plus adding water saves water and energy. I cant, in good conscience, sell this POS to someone else, and I cant afford something else. I sure miss my simple reliable old Maytag. I could say even more about this atrocity, but not now. I HATE THIS POS!

I purchased this Whirlpool washing machine model# WTW4950XW2 and after 10 months of use, it broke down. The repairman fixed it (gear box) and said that the motors and the control boards went bad. I didnt get a weeks use out of it because the motor went bad. He came and fixed the motor and it didnt work once after that. I called Whirlpool up and they sent their serviceman out twice and they didnt do much but reprogram it and both times it didnt do one full cycle. Now they (Whirlpool) are going to put a new control board in and hope it works. Whirlpool wants me to get another years warranty on the machine & charge me $100 and not do anything about all the money I spent going to the laundromat (2 months worth) while this machine was not working. There should be a recall on this machine for replacement & reimbursement of all the time and money lost.

I bought at Lowes. The first one was sent back (doors stuck, suction cracked lining). Now the temps are not working in the fridge or freezer. All the food got dumped. Its sad. My old one lasted closer to 25 yrs. (and may I add up to ten children). This one has only been used by adults. I thought I could trust Whirlpool?! I sent info to local Lowes. We will see if theres any help.

This dishwasher does not clean the dishes. Having said that most of the dishes are too oversized for the small capacity. Perhaps the fact that this is such an old dishwasher. I’m not sure but none of the dishes get washed. About the only thing that works is the dryer heater. Sorry to say, I’m not happy with this dishwasher and wouldn’t recommend it to anyone.

Purchased the 2015 Whirlpool Cabrio. Today 5-2018, the panel went completely out. When I called the store (Lowes) they asked if I purchased the warranty. I responded no, she went on to say, “Well since you choose not to purchase the warranty youre stuck”. Even if I paid for the warranty a washer should not break down in less than 3 years. My previous washer lasted 18 years with no problems. We purchased this washer because of the larger load. It was one of the most expensive washers. It’s a piece of junk and the manufacturer will not stand by their horrible product. Please DO NOT buy! I will be filing a formal complaint.

My 2 year Jennaire (made by Whirlpool) broke down on 12/14/11. Repairman came out on 12/19. He said that the compressor was not working and ordered another and he came out again on 12/22. He said that it could not be fixed (internal leak or something). An aside to this story was that a tank of compressed oil blew and damaged my hallway and kitchen walls and floors and 2 rugs. That was being handled by the repairmans insurance company.We called Whirlpool and they said that they we could pick out a new refrigerator priced at no more than $2399 even though we paid $2799 for the Jennaire and would have to pay the difference for a model costing more. We went with a Maytag (Whirlpool product) that listed for $2899 but was available at 2 local stores for $2050 and $2100 but I had to give Whirlpool anther $500 because they use the MRP.They finally delivered it on 1/5/12 but would not leave it because no one disconnected the water line to the appliance and they would not touch it. It took me 20 seconds to do it and if they would have told me so it would have been done on the 5th. Rescheduled delivery for 1/8/12 and the unit was delivered damaged (large dent in front) and they would not temporarily leave it until a replacement came.I called Whirlpool again and asked them to just call a local Home Depot or anyone in my area (all had the unit in stock) to deliver one but they told me that it must come from the warehouse in Michigan (I live in PA) and that it would be yet another 5 to 10 business days to receive it. So, I am paying $700 more for a unit that I could have bought and had delivered before Christmas not to mention the inconvenience of no unit for a month. Not to mention the damage to my home, $200+ dollars in thrown away food, time to shop for new unit, time for 2 repairman appointments and time for the 2 deliveries thus far and countless phone calls to Whirlpool to get the new unit.Today is 1/10/12, so I guess Ill have by month end if there are no other problems, you would think that they would try to expedite this just because its been so long or give us a substantial credit for all the trouble. Never again Whirlpool.

I have always like the Whirlpool brand in general. It is a well known company and the products have always been of quality. I will say that recently I discovered that Whirlpool will only allow their own technicians to work on more current washers and driers and that is concerning since I have always used a technician I know and trust.

I have had our new Whirlpool Cabrio Washer for about a year. I absolutely hate it. I along with all the other people that is complaining about their Cabrio. I have found it to stain my clothes, not get them clean... Sometimes not even get part of them wet. I wash every load now no matter how small on the deep water option. I still have to add about 3 to 6 gals of water after it fills to try to help them get as clean as I possible can. I have stopped using fabric softener because I believe that is what may be leaving the stains on the clothes because it doesnt dilute it. Also you cant soak clothes in the washer long enough. I know it offers a presoak but when the clothes are not getting wet... That is not soaking. I tried to fill it up and raise the lid so it wouldnt wash until I was ready for it to wash but it automatically emptied the tub after a short time.It is funny watching the clothes when washing... Even I could tell they were not going to be washed well. I thought who in the world developed this washer. Certainly no one that had ever really considered what women need to wash clothes on a daily basis. I would sell it but I dont think anyone would buy it. If there is a class action suit I would consider joining in. Whirlpool could not have spent much effort in checking this washer out. A lot of money down the drain. I did not buy the dryer because of the lint vent being on top of it. What a mess those make when you have to empty it. So I purchased a Maytag Bravos XL. Now that is a wonderful dryer! As one homemaker to another I suggest you check it out. Never had one I liked more.

I wrote you about this oven. This morning, they replaced the thermostat and then wanted me to self-clean it again. Now it wont work again, so I called Whirlpool and wanted to replace it and it would cost me $1,070 extra. I told them that was not acceptable. I paid over $3,000 for the one I have. Now, I have to stay home again tomorrow so they can replace the same part again. To keep in warranty, I have to replace the part every ninety days if I want to self-clean my oven.

Bought a built in oven August 30, 2018. Oven stopped heating two weeks before Thanksgiving. Repairman fixed it. It is not working again, two weeks later. Bought from Best Buy. They will not take it back. Whirlpool will not replace it. UGH!!! $ 1,600 down the drain. Will no one help?

A new washer, kept in pristine condition, indoors in an upstairs laundry room, used by 1 person for 4 years should NOT rust out. I took pictures and sent them to Julia ** a company representative after she offered me a discount on a new washer but would not send me an email with directions like it was some kind of secret until I insisted several times. The email simply had her phone number. I was to let her know the models I would be interested in and she would tell me if those were available for the discount. Then the company would charge me, deliver the new one and charge me to install and remove the old one. How is this for a great company. I sent her the models I might consider. No word back. Whirlpool, not looking like a stand-up company to be proud of. Shame on this company.I like the machine, but seeing it rust out before my very eyes has changed my mind. How will they address a 4 year old washer rusting from the inside out? How will they address a 1 year warranty? I found a copy of Whirlpool Washer Warranty that used to have up to five years for issues such as poor workmanship. It takes more than a year to find these things out. Dont make them if you cant guarantee that they will last. My last Maytag lasted 18 years and was still in good shape. I just wanted a model without the agitator in the middle and on that would conserve water. Should have kept the old one.

Hi team, I have to lodge this complaint after because of getting continuous problems I have suffered with my Whirlpool fully automatic washing machine top load 11 kg bloom wash 360 degree. I purchased the abovesaid brand new washing machine on 1st Jan 2017. Since the purchase I am struggling with this machine. I raised the fault in the beginning itself and the service was done on 5th of Feb. Jobs sheets enclosed here with.Similar issues kept on arising and whenever I raised those issues with the whirlpool team, they mentioned that company policy is to repair the faulty part if it’s in warranty and they will not replace. They suggested me to go for the AMC and to be on the safer side, I also took AMC under warranty period only. (AMC card - My cheque dates and service details all are mentioned onto it.) Recently I faced another issue on 26th Feb for which ticket was raised. Engineer visited on 27th Feb and advised us to replace the motor part. On 3rd March they replaced motor mechanism and ball-bearings. Then engineer advised us to check the working by giving a trial wash.I started the machine to wash clothes and after 20 mins machine started making abnormal noise. (I have made video of it, audio of the video captured the noise). I again called up the service engineer immediately and informed him about the voice coming out of machine and he gave a lame answer by saying “It is normal sound”. Then I again called Whirlpool and requested senior engineer visit to resolve the issue. Senior engineer visited and told us that one of motor screw wasn’t tighten properly. It opened while running the machine which completely damaged the motor.After that I am continuously calling to service centre to get the updates on my machine motor replacement. Finally they mentioned that they dont have motor part available with them due to company ceased this model productivity. When I raised this issue with the Whirlpool team they mentioned that they can only pay 40% of the machine value, because I had AMC. However, I did mention that this damage is caused by the negligence of their service engineer, but they didn’t discuss anything about it.When I continuously chased them they dropped me an email to refund only the 40% of the machine value. I feel cheated and harassed!! When I bought the machine they gave us 10 years warranty now they mention that motor is not available as it’s a 5 years old model. My grievance is that since I had already taken the AMC and the damage was also caused by their engineer, why I have to bear the loss. I have already struggled a lot with this machine since last 5 years from the day I bought this machine and now I am losing my hard earned money. Kindly do the needful. Documents attached as follows: 1. Serial number of this machine 2. Bill/ Invoice copy from dealer 3. Job sheets4. AMC card (with 3 years extended warranty) Thanks,Pratibha

This machine was my dream machine for about two years. Then the noise started during the spin cycle. It gradually got louder and louder, until it got so loud that it sounded like a jet engine taking off. You could not be near the wash room and hear each other talk. Then it began to aggravate me with the UL flashing. I know how to load a washing machine. It was just a defect. Then it started making a grinding sound to add to the roaring spin noise. We were told that it would take over $500.00 to fix, so we just sat back and waited for it to die. Well, the other day it began to leak some water out of the bottom of the machine. Now today we are paying our last respects to a piece of junk that Whirlpool calls a washing machine! It is less than 5 years old. This was a $900.00 washer. There should be a recall. We should ban together and demand a recall! Now I will be forced to go buy a new washer. I can tell you which name brand I will not buy, Whirlpool!

We had Lowes install a Whirlpool model Nu40T121-403 natural gas water heater early October 2012. The temp controller went out in October of 2014. I replaced the controller myself at a cost of $30 for overnight UPS from the manufacturer, American Water Heater. The controller went out again almost exactly one year later and I again replaced it for the $30 shipping charge. In both instances the customer service person told me the malfunction was probably due to my not flushing the heater annually, causing a sediment buildup. The water to the heater not only flushed annually, but is filtered through a water softener and there was absolutely no evidence of sediment in the drain water or on the part of the control that is in the tank. Now it has stopped working a third time. I called Lowes about replacing it, but they only carry Whirlpool, so wont be buying a replacement from them.

Handle needs smarter design. I purchased model #WRT311FZDM00 in November of 2015, didnt install in my new home till December. I am a single senior female, so there is little wear on the fridge, unlike a family of several people and with kids. The door handle actually broke just behind the screws that hold it in place, the plastic part of it broke into a couple of pieces. The cost to replace this handle is approximately $80, which is ridiculous in my opinion. Please start making things of quality materials instead of cheap plastic, especially at a stress point of a part. Even I know better than that. All 4 of my major kitchen appliances are Whirlpool, as well as my washer/dryer. I thought I was buying quality products. Hopefully things will hold up better with the other ones.

Cabrio top load HE washer - Ive only had the washer a couple of years. My husband bought it for me thinking it would make washing more time efficient and energy saving. Lesson learned! After struggling with this washer for the past year, I was told today that to repair it, it would cost around $800 or I would need to buy another washer. The washers bearings and tub need to be replaced and it will not spin properly or at all. Previously, I have owned washers for over 10 years each. This was definitely not a good purchase. After reading all of the other complaints on this site, I understand that I am not alone. It was also mentioned on one complaint of the possibility of a fire hazard with this washer. Whirlpool should be recalling.

This Whirlpool dishwasher is the worst dishwasher I have had in 45 years of using dishwashers. I have bought dishwashers, but now rent and so am stuck with this one. Initially, I complained to the landlord about the dishwasher not getting the dishes clean, so the repairman came and recommend replacement. Unfortunately, it was replaced with the same brand. The new one didnt wash any better than the old one so I pre-rinsed everything and the dishes still come out with sprayed dried food on them. The spray holes in the arms fill with food no matter how thoroughly I rinse the dishes. The silverware in the door rarely is clean. The filter is always coated with food particles. The top shelf is always worse than the bottom shelf. I have used inexpensive GEs before and nothing compares to the poor quality of the whirlpool.

Purchased in January of 2014: Brand new Whirlpool WOS51EC7AS01 model oven - interior bottom metal has buckled causing the enamel to crack and break off from oven bottom. I registered all my new appliances immediately for warranty. When this happened after the fourth or fifth time baking in the oven, I called Whirlpool to get a service person to look at it. First person Whirlpool scheduled to come out refused to even come out, without looking at my oven. He said he knew we did something wrong? They immediately set up a second service person, after two weeks waiting for an answer; I had to call him (twice). He said that his report and pictures sent into Whirlpool shows normal use and there is nothing wrong with our oven? So, Whirlpool will do nothing to repair the oven? We just spent almost $4,000.00 on all new Whirlpool appliances, and this is how we get treated? WOW! Never again will I ever purchase a Whirlpool product. The enamel is gone in spots from our oven floor. How long do they think that will last with no protective coating on the oven? Terrible customer service.

I have purchased a Whirlpool Water Heater on May 21, 2005 from Lowes Model number FG1F4040S3NOV, Product number 0730261, Serial number 05181291061. It is one of the Flame Lock heaters that was part of a class action law suit. The lawsuit has been settled however. I have had three thermocouples to date installed and each time the heater has gone out after three to four days. The technicians I have contacted at Whirlpool all have stated something else is wrong with the heater even knowing that this model has been seriously defective from the beginning. They always tell me to do this and that to repair it. I do not have hot water as of the date of this writing. The original problem began June 19, 2011.

I bought a new Whirlpool fridge that has been a piece of junk since the day I bought it. The minute the warranty expired. The thing broke down. The corporate service center was a joke. 15 min wait time just to get through. Then a runaround of misinformed referral numbers. Minimum charge $200/30 min just to have a service rep even look at it. And then $100/hour + parts after that. Highway robbery. My doctor doesn’t even charge me that much. I will never buy a piece of junk WP product ever again. Their customer service is rude and non-existent. The company does not stand behind its products. Don’t buy!

I bought a Whirlpool refrigerator because it was the lowest priced model that offered a bottom freezer compartment and fit into our available space in the kitchen. We also want a white coloured appliance. One thing we never noticed until set up at home was that there were no ice making trays nor an ice bin. We have had the fridge for five years with no problems. It is quite noisy when running.

Top loading Washing Machine Model #WTW4950XW2 - You would think that a big company like Whirlpool would make quality washers. NOT! Our top loading washer bought in late 2011 has been making loud noise during the washing cycle for the last 6 months, and last night was struggling to spin. Seriously, with just my wife and myself using the washer once a week, this washer should last over a decade! So I called Whirlpool and explained the problem... and, as expected, they cannot help me as it is over the one year warranty. NO MORE WHIRLPOOL BRANDS FOR US!

In August of 2013 the lid on my Whirlpool Cabrio, model #WTW7800XW0 simply fell apart. This washer was purchased from Lowe’s in Live Oak, Florida on August 23, 2010. Lowe’s put me in contact with the authorized repair service, A&E Factory Service. The A&E technician arrived and told me the hinges were the cause of the lid breaking apart. He ordered a new lid and new hinges. When the lid and hinges were delivered the technician came back to my home and looked at the hinges again and said they didnt look that bad so he didnt bother even opening the box with the new hinges. He just put the new lid on and said I shouldnt have any further problem. The total cost of the new lid, hinges and service call amounted to $385.50. Well, here it is - not even a year later and the same problem is back with me. Yesterday (July 23, 2014) I was doing a load of laundry. When the load was complete and the lid lock turned off - the lid actually sprung upward and now the lid wont close. It seems that Whirlpool is fully aware they either have a design flaw of defective lids and they are gouging the customers for their errors. The Cabrio model is supposed to be top of the line - certainly not a cheap machine. I was, at least, happy with the performance of this machine cleaning my clothes properly but this lid problem is ridiculous. I do not plan to purchase any Whirlpool products in the future if they do not make things right by myself and hundreds of others with this same problem.

I have Whirlpool Gold washer and dryer and microwave. All handles and grills and trays have broken. What a disappointment ! Their top of the line? We, at this house, will always avoid buying anything from crap pool gold!! Its a disgrace the way they make these things. And the support sucks!

The plastic holding the vegetable drawers broke and now they are cracking because nothing is there to hold them in place. This fridge has a freezer on the bottom, which I like. Unfortunately, I had an Amana before this and it was wonderful- just old. I had to settle for a smaller refrigerator and that is part of the problem.

I love my Whirlpool Washing machine. Purchased it 2 yrs ago & have not had any issues. Its quiet, large capacity. Washes my clothes very clean. The various washing cycles makes it so convenient to wash as much or as little as I need on any occasion. I do recommend to anyone that you do the cleaning cycle on these new washers to ensure top performance when washing.

I am so thankful that there are others who are having the same problems with their washers. Since 2006, my husband and I have had words regarding who is not loading the washer right, why are the clothes still dirty, and why does the dryer have so much lint. The excessive amount of lint ruined my dryer. I get UL codes all the time! Before the UL flashes, it sounds like someones trying to break in. It is 2011. Despite the problems, it has not died yet. I am selling it and will never purchase another from them again. I have the dryer and it went out 2 years ago. It has problems with the motor. You can guess I did not buy a Whirlpool.

I bought a Cabrio set in June 2007. Within two years, I had to have the barrings replaced ($800 job). Now, its two years later and Im getting a F50 code. The repairman put in a new part, still got the same code and left. I am out $970. I am a disabled vet/single parent and now I have to buy a new washer. Who is going to start the class action suit against Whirlpool?

Microwave Hood Combination...moisture sensor failed...potato caught on fire. Service company Whirlpool sent failed to show (Whirlpool selected a repair shop over 100 miles away). 2nd service company told me sensor failed and they would return with new part (ignoring the fact the white microwave was not gray and black) in a few days. If I wanted a new microwave without the dust and ash, I had to call Whirlpool. Whirlpool is ALWAYS experiencing a high volume of calls.Whirlpool states 7 - 14 days (unit on back order of course) for the microwave will arrive. 21 days later..no microwave. More high volume of calls... Whirpool state a repair center has received the microwave on July 31st and should have called me. Said repair center has no record of this transaction. Whirlpool reps claim to have records of my claim...but... they keep asking did we tell you it had been handled? I say read my file... Customer rep says my file is hard to understand (i.e. it is long). But they assure me they are empowered to help me. Maybe they should look up that word.Today...it is not Whirlpool customer service fault! No... It is being handled by a Product Replacement Specialist... Sadly they cannot provide me with any contact info for that Specialist. Empowered but not informed! Lesson: Whirlpool dont buy or if you do... and it catches on fire...just buy a new one... They make it impossible to get a replacement.

Bought this washer in 2013 for close to $800. About a year and half old it got real loud sounds like a freight train. Asked whirlpool repairman about it, and was told it is a main bearing going out. He said it would cost over $500 to fix it. Whirlpool warranty sucks - only one year. Called whirlpool, told them the problem and asked if this is a problem with this washer. Got told no they have no problems with it. Found out later not only do they have this problem with it they change design because of it. Repairman said his own daughter had same problem and he had many service calls on this model all with same problem. WHIRLPOOL WILL NOT REPAIR OR REPLACE PRODUCT WHICH IS A MANUFACTURE DEFAULT. It sets in our house unusable. I will never buy a whirlpool product again. Sad because that use to be all I would buy.

When I moved into my current home, this dishwasher(Whirlpool Quiet Partner 1) was already installed. It had never been used until I moved in. After two years of 2-3 times a week use, I have major problems. It will not complete a wash cycle, regardless of what settings I use. It runs long enough for the soap dispenser to release the Finish tablets which dissolve, but then the dishwasher stops running. The dishes are not clean, and neither is the interior of the dishwasher. It also appears to be leaking when it runs. I cannot afford to replace it, so either I will repair it myself or use it to store pots and pans.This is not my first disappointment with a Whirlpool product. A Kenmore refrigerator made by Whirlpool lasted 7 years before the compressor failed. Apparently, the self-cleaning coils werent and caused the compressor to fail. The refrigerator I have where I now live is a Whirlpool over 20 years old and runs perfectly. Apparently Whirlpool quality has deteriorated badly in the last two decades. I will never buy another Whirlpool kitchen appliance because of the dishwasher and new refrigerator experiences. When I searched the Internet for fixes for both appliances, I found many other owners having the same problems I have had.

I purchased my stove in June 2020. I had no idea it was to be connected to the internet, but no big deal. Had I known of all the other quirks I would have thought twice. 1: A red light comes on to tell you a burner is on but not which one. 2: A red light appears when a burner is hot but it doesnt show which one. 3: Only 3 burners out of 5 can be used for cooking the other 2 are warming and melting ONLY. 4: The stove updates its software whenever it feels like it and shuts off the oven and burners. 5: Periodically I have the oven on and it just turns itself off!6: The touch controls for the oven are in a bad spot because if you accidentally touch them when the oven is on the oven will shut off.Not sure if it has any serious problems just the inconveniences listed.

I went to Lowes and purchased a new kitchen full of appliances. The refrigerator is the bottom freezer, French door with water inside. The problem is the freezer stays cold and the refrigerator does not. The vent from the freezer gets frozen, and the refrigerator part stops working. Its only 3 years old . We were told it would cost 700 bucks to fix it, and that a power surge could make it happen again. The capitol of power surges, Florida, what a complete waste of money. I spent my life in retail selling their products. Im so sorry to all who have purchased from me... Its really a terrible product. I would give you all a refund if I could. This really hurts...

Whirlpool refrigerator - I purchased $6950.93 in Whirlpool products in one day last year at HH GREGG in Lexington, Ky. The refrigerator was purchased on that day September 18, 2012 and my kitchen wasnt going to be ready until December, but I wanted all items bought for measurements (specs) for the new kitchen designer. HH GREGG delivered to my garage October 26, 2012 because they couldnt hold any longer, but when we purchased that day they promised to hold till December when my kitchen would be finished. I have Proof from the kitchen installers the day they finished, December 28, 2012, was the day the appliances were installed. Well here I sit typing this letter on January 7, 2014 and my Whirlpool refrigerator is as of right now is in need of a compressor while losing approx $1000.00 in purchased food. In other words, approximately $900.00 in repair cost. Isnt Whirlpool a large enough company to stand behind its products when I paid $2599.00 for this refrigerator for at least one year from installation instead of purchase date? My fiancee has been trying to work out a solution with Whirlpool and the parts are on back order now. For at least two weeks we have been without a refrigerator and have two young children. Doesnt it show that the parts being on back order from Whirlpool, barely being a year old prove the defective product is being sold to the public daily? I plan on going further with this action due to the name Whirlpool all over my kitchen which disgusts me. Im going to write every columnist I can and do all I can with what little resources I have against this large company if no one helps us. This is absolutely an injustice against consumers...

I am very happy with my Whirlpool appliance- oven. Ive had it for almost 5 years, with hardly any issues. -Its very user-friendly when I need to program any cooking instructions. Both the elements & the actual oven cook everything to a perfect.

I bought my topload washer 2 years ago along with a dryer. The past month, the washer started sounding like an airplane, ready to take off, whenever the spin cycle was on. Then, it started to not start at all on certain cycles or would start to pump water in and then stop suddenly. I had a repair man in today, and it was not good news. He told me that he sees this a lot, especially with the Whirlpool washers and it is costly. The bearings are shot and will cost close to $500 for parts (alone), not costing the price to have it repaired. So now, I have called Whirlpool. The people there are very friendly and sympathetic. But even though I went as high as the supervisor (the highest authority I could speak to), he told me my washer is not on the recall list! I asked what it took to get it on one. Basically, my complaint was filed and end of story. Well, not quite. The supervisor was kind enough to give me the address for the Head Office for Whirlpool Canada. So people, start writing into this address and bombard them with your frustration: Whirlpool Executive Office, 200-6750 Century Avenue, Mississippi, Ontario L5N 0B7. If you have spoken to Whirlpool, ask for your reference number pertaining to your case and include it in your letter along with your phone number. In the meantime, I will be writing a lengthy letter; and I also went out today and bought another washer! Yes, it was not a Whirlpool, and I will never have another Whirlpool appliance in my home. And I will steer anyone away from this brand name. Good luck to all and start writing!

The clock-timer went out. Appliance is only 1yr. 6mo. old. I CONSIDER THIS STILL A NEW APPLIANCE. This is the 2nd Whirlpool appliance, I bought a Whirlpool washer & dryer. The washer went after 2yrs. use. I bought a Kenmore used washer and it still works. I paid cash for the stove. It was bought at a Sears outlet in Cudahy, WI for $398.58 total with the one year warranty. I really have not gotten the use of the price. I guarantee you (this company) I will NEVER buy another Whirlpool appliance again. TOO BAD YOU COULD NOT RETURN A PARTIAL OF THIS MONEY TOO ME!!!!! I have a Sears repairman coming today 8-3-13 costing me $75.00 just to walk in the door.

I absolutely hate this expensive piece of junk. I have tried everything, and my clothes are not clean. It is only myself, and my husband, and our clothes dont get very dirty. I would like to send this junk to the junkyard, but I spent a lot to get the dryer with steam that went with the washer. This experience has soured me on Whirlpool appliances, and now I learn they also make appliances for Maytag!

I bought this Whirlpool Cabrio Washer 3 years ago. Yesterday will be my last repair. I installed a new tub (bearing failed have to buy a full tub to replace), new suspension rods and a new stator and rotor (cracked). Last year I replaced a drain pump twice, and a computer board. All of these repairs since I purchased this washer have cost me well over $900 for a $1400 machine. I dont mind replacing a pump every few years but these larger failures are unacceptable. We have moved back to Kenmore on some new appliances we purchased this year as result of trouble with Whirlpool. Whirlpool should send out a recall on the suspension rods; the existing ones seize at the top and stop functioning causing the tub to shake excessively. This led to the cracked motor (rotor cracked).

Refrigerator model # wrs325fdam04 - Refrigerator shelves and drawers are made of flimsy material. Water dispensed is never cold enough - almost at room temperature. Every six months one has to change the water filter cartridge, Filter1 w10295370a, which costs at least $49.99. Cheaper versions that cost 50-60% less, I have purchased and returned 2 different brands, are not compatible with this refrigerator. I do not recommend this refrigerator.

New stainless steel range 5.3 cu.ft. with convection oven delivered by Home Depot on time. Before the day was over the trim around oven glass was falling off. Double sided sticky tape was not holding. Yes its put on using double sided sticky tape. Called Home Depot, once you accept it, you deal with Whirlpool. They must first send someone to look and see. Yes its falling apart. Service tech will order new door. Mind you it will also have the sticky tape. We have also noticed that the glass top has many deep scratches, he will replace that also. A week later still no word, when. Used the oven because I couldnt wait and as it heated up smoke poured out of it and a loud noise from inside. Turned off and pulled out bottom drawer to unplug. Bottom panel had fallen down and undersides were rusted. Only had the stove 3 weeks and its Christmas Eve. Will read reviews first next time. No problems with my other Whirlpool appliances.

I am on my second Whirlpool hot water heater within 7 years and both had a 9-year supposed warranty. Upon replacing the pop-off valve (at my expense), I paid $98 to replace the gas valve (part was issued by Whirlpool). Still having problems with pop valve and now the pilot light wont stay lit. Upon calling the number (877 817-6750) I was finally told they would replace the heater. When I stated that I did not want another faulty Whirlpool heater and that I would take the faulty heater back to place of purchase but that I wanted a local plumber to install their own heater, I was told that I had to have a thermal expansion tank or they basically would not do anything. Why would I want a third Whirlpool product? The second one is ruining my tiled basement floor as it is. So after spending over $600 for the faulty heater, now I have to spend $700 to replace it.

We purchased the Whirlpool Duet (front loader) washer and dryer in 2005 from Best Buy. We had many problems with the washer leaking around the front door. After several visits, Best Buy (in 2007) said we could pick out a new washer. We picked out the Whirlpool Cabrio. About 2 years later the mother board had to be replaced on the Cabrio. We are constantly getting F codes and have to unplug the washer several times for it to reset. It also sounds like a plane getting ready to take off and from what I read that repair is very costly. It has been leaking as well. I contacted Whirlpool today and they informed me that there was no recall on the machine and when I told them that there were many complaints for the same issues online, they said they do not base their recalls on blogs and to fix the problem, I would have to incur the cost. This machine is the biggest piece of junk that I have ever owned. I will be sure not purchase a Whirlpool in the future!

I bought my Whirlpool gas stovetop in March of 2016. The burner knobs that connect to the stove is made of plastic and all 5 knobs broke within the first year. Each year I have replaced knobs and had issues with the knob breaking and then not being able to tell if the gas is off or on. I have called and talked to people at Whirlpool about this issue several times. Although they seemed concerned they will not replace the knobs and I have had to purchase them through Whirlpool. The gas stovetop obviously has a serious and extremely dangerous design flaw. I have kept some of the broken knobs just to tell others about this terrifying flaw. Again, last night the gas was on for several hours before we discovered it!! I called Whirlpool again and they were unconcerned. The Model is #WCG97US0DS00, Serial#D60509297. Beware and DO NOT PURCHASE this gas stovetop. I wish I had not bought mine.

I purchased a Whirlpool stove, microwave and fridge in November 2012. The fridge model #WRT771RWYB01 has been a lemon from day 1. I have had the repairman out for the same issues multiple times. Ice build up in the freezer, water tube to the ice maker frozen, food in the fridge freezing, blah, blah. They have taped, glued, replaced everything they can and to no avail. It still happens. When you call for service, it takes 2 weeks or better to get someone out. I will NEVER buy another Whirlpool product! This has truly been a nightmare experience!

About two months ago the washer starting stopping and the UL light continued to come on during every spin cycle. So I would adjust the clothes and start it again. So I decided that I should call a certified serviceman to come out and access the problem. Today a certified serviceman came out to access the problem. After about twenty minutes I was told the tub needed to be replaced and the cost and labor would be $600 or more. I do realize that the washer is about 8 years old but to completely need a repair like a new tub. I am very upset and have no idea what to do.

Nice looking, prices very fair for quality product. Options are always good. My mom used Whirlpool. That thing that goes in the middle of the old time washer is now gone. That thing would rip or stretch out clothing bras. Anything that was nice it would make it look horrible. Ive had my washer and dryer for 6 years and they still work like new. When shopping for a washer and dryer I do look for capacity, energy efficient and the brand. I prefer to stick to the old school brands just like my mother did. I must admit that I do love the fact that it is an HD high efficiency washer. The deal-breaker would be a low quality construction made a washer or dryer nobody needs to have problems with it. If youre spending that type of money you need to get good quality items.I love my washer and dryer. Theyre both and white color. Its a Whirlpool Cabrio with HD High efficient load energy saver and H2 wash system. The washer has a lid with a see-through glass which I love. My dryer is also a Whirlpool Cabrio steam with a resource saver that gives me a lot of different options as far as my clothing is concerned on how I need it dry.

The American Standard 95% 2 stage variable furnace is by far my favorite furnace to install. I know exactly what to expect from this furnace and I have had zero factory issues with this model. Outside of making a few sheet metal transitions this American Standard standard 95% furnace was very easy to install as well. And like the 2 stage variable … no factory issues.

I bought a 38 gal. low boy electric Whirlpool water heater from Lowe’s. It was replaced because of a leak around the upper heating element after only one year. Now, the replacement heater is leaking in the same place, and it has been leaking so long that the electric terminals are rusted, water is standing in the cover plate, and the lining is soaked. I cannot see behind the plate and dont know it until the water finally made its way into the drip pan beneath the heater. When we saw the standing water, we turned off the electricity and shut off the water to it to stop a fire hazard. The warranty is up on my water heater, but my concern is that this could cause someones home to burn.

This washer never worked right. It simply mixes the clothes up with little water. A real piece of crap. See the 2000 other complaints. Time for class action suit.

We purchased a 4.8 Cu FT High Efficiency Front Load Washer in February of 2016. What a nightmare. Just a few months after having it, we kept getting an E3 error message that would not go away. After 2 weeks of waiting before a tech could come out there replaced a door mechanism said it would be fine. After the next wash same thing, same problem. Could not even open the door to get my laundry out. Again they could not get a tech out for at least 2 weeks so Im stuck with the cost of getting my laundry done elsewhere. This time it was the motherboard. Had to wait a week for that to be shipped out. This was all completed in June 2016. We are now the beginning of September and same problem. Again we are told at least 1-2 weeks to get a tech out. Seriously Whirlpool, we are your customer. I have a family and we need to wash our clothes. We spent $1200 on this machine only to have to take our laundry to a public laundry mat because your machine keeps breaking down. They will not replace the machine even though this is the 3rd time with the same problem. The customer service is horrible. They are not willing to help in any way to get this fixed much sooner for her or give us a new machine. This one is obviously a lemon! I will never purchase any Whirlpool appliance again and I suggest based on some of the reviews on here no one does. Next appliance I buy I will do more research for sure.

This product is very noisy. This product looks good, works okay, size is good but is very loud and overpriced. Probably would not buy again if I had to purchase another refrigerator.

Never again will I buy a Whirlpool product. I paid over $800 for a new washer 51/2 years ago. I had it worked on twice under extended warranty. Now the bearings are out of the tub and it sounds like a jet taking off when it spins. I had whirlpool products in the past and they lasted for years with no problems. I have a friend who has a relative who is an engineer for whirlpool and his job is to engineer their products so they fail within a certain time frame. They dont want them to last like they use to. They now have gotten their product line to the point where they can tell when it will fail. This is crap. What happened to products that lasted like they use to. NEVER BUY WHIRLPOOL.

The dishwasher is quiet and seems to clean most all of the dishes even when there is dried on food remnants. Multiple cycles that allow for light, medium and heavy cleaning. Also the ability for air dry and minimum use of water. The size is appropriate for normal amount of dishes, pots, pans, etc. Stainless steel front with most of the controls hidden. I have always had good luck with Whirlpool products, with this dishwasher continuing with being a quality product for the amount of money spent.

I had an addition added to my home in 9/2007, which included a new bathroom. A whirlpool hot water tank was added. This week, I woke up to no hot water, so I called the whirlpool customer number regarding the warranty on the model FG1F4034T3NOV. T hey told me the serial number shows its out of warranty, although I may have only had it since 2007. They also said there was a screen that needed to be clean under the bottom of, it that if not clean, would make it stop working. Since homeowners where not cleaning it, they have made a replacement door part that would fix it, and do away with the problem, but I would have to pay $35 for it. I asked them, since the serial number shows that the part has not been replaced on this unit, why not just send it to me, and I pay to have it put on. The person said no, you will have to pay for it if I wanted the part to fix it . Although my builder did not give me the receipt for it, thats just not right. If a manufacturer knows they are having problems with their product, which require a part replacement, and they have produced one, they should be willing to give the part to everyone with the product that request it. On top of that, this model has the left hand threaded thermocouple, which no one around seems to carry. I am totally disappointed with Whirlpool, and right now would not consider buying, or have any more of their products installed into my home.

We bought a new oven/range in April 2019. December 7th 2019 it stopped working. No power at all. We contacted Whirlpool about our unit as it was still under the year warranty. They contacted their local repair company. 3 times they have said they were coming out to fix it and they had the part. Three times they have told us never mind. They didnt have the part and would have to come later. Most recent update, they wont get the part until the 20th and wont make it out until the 23rd. That is over 2 weeks after our unit broke and it is the holidays and we will have family visiting. We have tried to get answers about what is really going on and we keep being told they cant help us or give us any answers. So frustrated. You can bet I will never buy another Whirlpool appliance again!

I bought a heater from Lowes in south lebanon ohio in feb. 2013. Gas valve is bad. Whirlpool will not replace it because it was put in a utility room with a toilet in. What a bunch of crap. Their service dept. is joke.

I purchased an expensive dishwasher made by Whirlpool and sold at Lowe’s. Immediately upon receiving the dishwasher I noticed a good size scratch. I had it serviced within one month of purchase because dishes were coming out dripping wet. Technician came out and told me I needed to add rinse aid. I had been using rinse aid, which I think is ridiculous to have to buy an additional bottle of something that’s not even cheap just so this thing dries dishes but moving on...Now it’s been 1.7 years and I’m having more problems. Top rack of dishwasher is broken and falls to the side every time you pull it out. The door to dishwasher also no longer has any spring. I take very good care of my things and this just unbelievable. I called Lowe’s they won’t help because it’s been more than a year! I guess Lowe’s can’t stand behind their merchandise for more than a year because they know they’re selling garbage. I called Whirlpool directly and was told they would come out and service my appliance for a minimum charge if $189! I have no words. I need to buy a stove in the next week and I assure you I will steer clear of Whirlpool. Like the title of my review I feel absolutely robbed.

I bought a Whirlpool dishwasher from lowest in May of 2011 and it stopped draining, serial # f11601686. I was told it was under warranty and you sent someone out. But surprise, I got a $129 service bill and it couldnt be fixed, computer board gone and drain motor shot. I was told its cheaper to buy a new one. After 10 months of use, we need a new one. I think you should replace my dishwasher and pay for a service call. Oh, the reason they said it wasnt covered is because they sold me a 2007 model.

Purchased a matching set, Whirlpool Cabrio Platinum Washing Machine and Dryer in November of 2012. After just over 2 years, Im stuck replacing the Washing Machine at my expense! The washing machine began leaking water out of the bottom of the unit and became extremely loud when operating it. The repair technician said it was a seal and bearing that needed replaced and the cost of repairing the unit would be cost prohibitive versus replacing the unit all together ($800+)! Originally paid over 2K to purchase these units and have them installed. I do not want to trust or rely on the Whirlpool brand again. I would appreciate any recommendation for a better quality, high capacity, HE washing machine brand to replace the Whirlpool unit with (Samsung, GE, LG)??

My family purchased a Whirlpool stainless steel dishwasher at Lowes for around $500. We were replacing a very old GE dishwasher which was so loud you had to leave the room anytime you started it because you couldnt even talk over it. We love the new Whirlpool dishwasher. It is so quiet we thought it was broken at first because we couldnt hear it running and even though it cleans exceptionally well we still sometimes have to look to see that the light is on to know that its actually running. The whole family agrees this may be one of the best purchases weve ever made. The only con I could think of is my son and I put the dishwasher in ourselves and this is the first one weve ever done and the instructions werent as clear so we had to redo the piping of the waterlines a couple of times to figure out in what order to be done. But everything hooked up correctly and worked immediately without a problem. Couldnt be happier.

I have an oven hood Whirlpool Microwave. Even though its more of a basic model it has worked terrific so far at about 5 years old. Only draw back is the extremely loud 4 beep alarm upon completion of warming up food. I actually cringe when it is about to go off especially early in the morning. Ours doesnt have the handy options button to turn it off. I have tried other combos with the buttons to see if they have it set up different but to no avail. Does anyone know if you can shut it off. The people who design these things must not have babies because they would think of this at nap time Im sure. Truly the sound this thing emits could wake the dead! I also had the fancy Whirlpool before like some folks mentioned about the handle and door frame cracking and disintegrating. Guess what, so did my parents, sisters, aunts and my neighbors. Definitely a major design flaw or faulty materials. My sister, mom got new doors and they began cracking again within a year!

I bought Whirlpool front load washer at Sears in June 27, 2012... (serial W104408696A) (W10409178A-SP). I had 6 episodes within a 1-year time that my clothes got burn holes and the inside of the washer. I would find a handful of gray powder after doing my laundry. The first time it happened, I thought that I left something inside my clothes that resulted to it, but I did nothing to contribute to the event. The second time it happened, I thought Im putting the wrong setting, so I chose another setting to wash my clothes. In that span of 1 year it was on and off happening. I read different reviews on this washer, and I am not the only one whos had this problem. Finally in 2013, before my warranty would expire, I requested for Whirlpool to fix the problem. Right away the tech told me that the problem was the glass covering, so they replaced it. Now my washer would not drain. I believe that this product does not belong in the market. If they knew what the problem was, they should have recalled it. I kept the sample of that gray powder.

We purchased a Whirlpool water heater at Lowes for $1100.00. Four years later it isnt working. There are no parts to fix it available at any store in Dallas, TX. We had to call the company. They made us pay the overnight shipping fee for the part. Then the part didnt show up. When we called to find out why isnt the part at my house, they said they found out FedEx doesnt deliver on Saturdays. No one ever called to notify us of this, instead the response was that they would use it as a coaching lesson for not notify the customer. We have now been without hot water in the middle of winter for 5 days. We have no idea when the part will arrive and if it will even fix my defective water heater. We will never buy another Whirlpool product and I strongly encourage anyone who reads this to not buy Whirlpool. They dont stand by their product and have horrible customer service.

I had whirlpool microwave model # WMH32517AS-2 that came with my new home in March of 2013. In September of 2013, we noticed there were times that the microwave failed to warm the food or liquids (coffee) sometimes at all. Then we figured out that we could hear the noise it makes when it actually warms the food. So after a repair man came out and saw the issue of not warming up, he replaced many parts but within a day we experienced the same issue. Whirlpool had a different repair man come out and replace additional parts hoping it would fix the issue but unfortunately, it did not. Whirlpool said they would send another microwave to us in January of 2014 but now its April 2014 and nothing sent and I have a broken microwave in my house. Due to the length of time it has been, I had to submit this. We have also called customer service on 5 occasions (who have these call documented) and the person that was supposedly helping us and assigned to our case 7 times with no response. We have attempted to talk to a supervisor but were told that I could not, which is unusual. Its just frustrating that this is happening.

I purchased a Whirlpool Gold French door with the bottom freezer in October 2013. I had one repair done while it was still under the 1 year warranty, but by the time it was 18 months old, it began leaking refrigerant. I was told by the technician that the cost to repair it would be more than the value of the refrigerator, and the chances of the repair lasting more than 6 months were minimal. I had to buy a brand new refrigerator (not a whirlpool this time). I contacted Whirlpool customer service but they were non-sympathetic. Do Not Buy Whirlpool Products - Poor quality and high prices.

I join the many who have posted about the Whirlpool Cabrio Washer cracked lid issue. Our Whirlpool Cabrio WTW7800XW2 glass-lid washer suffered the same (inevitable) fate – cracked plastic on the lid at the hinge stress points, after the washer was beyond warranty. Same story - runaround/no help from Whirlpool. Finally bit the bullet and shelled out the $200 for a new lid. HOWEVER, I didnt want to just replace it and have the same issue down the road. I removed the spring-loaded units that support the hinges, hoping to just remove the springs to release the pressure. I found that the springs are integral to holding all the components together in this unit. These are extremely heavy-duty extension springs, so I took them to my hardware store (TrueValue) and found springs the exact same length, but with a smaller wire diameter and thus requiring less force to extend. I replaced the original springs with these (Century Spring Corp. - #C-143 - 9/16”x3”x.054”). The lid operates perfectly, and now there is very little resistance at the hinge stress point. The only difference is there is no longer a “damping” effect when lowering the lid - it must be lowered manually rather than being allowed to fall on its own. That’s a small correction in habit, but will ensure that the replacement lid lasts for the life of the washer.

I purchased the four-door Whirlpool stainless steel refrigerator. It was installed on the 15th of June. One month later, the ice was not coming through the dispenser and if it did, it was a small amount. During this time, I was receiving notices from them about purchasing an extended warranty. Today, August 23, 2012, the ice maker stopped working completely. I was disgusted. Paying for the top-of-the-line refrigerator that doesnt last for 90 days is ridiculous. Also, the handle on the vegetable keeps coming off. That will be the last Whirlpool appliance I will buy.

Overall the stove works well but it is horrible to clean. You have to use a lot of muscle to get the spills up from around the burners. It is hard to get around the burners to get all the spots off. The gas burners work well & cook evenly.

I bought a Whirlpool refrigerator in April. The motor ran constantly. The company replaced it for me but it was back ordered until July. The one delivered in July kept freezing the items in my refrigerator. I had two service people come out to replace parts in the next couple of months. The entire time having to throw out frozen food. Finally, they had another one delivered in November. This one continues to freeze food in the refrigerator. Mind you, I just got it and they want to start again with service. Seems others are having the same issues. My 4 month old gas oven is also not broiling. Customer service is awful. Every time I call the wait time is over an hour and then they don’t really help. I would not recommended Whirlpool to anyone.

Whirlpool Dishwasher Model WDT7820PADMO was installed last October. Small parts began detaching themselves from the first day. Then machine leaked onto floor two weeks ago and I shut it down. As it was purchased from Sears, they and Whirlpool have batted responsibility for repairs back and forth until proof of extended warranty was supplied to Whirlpool. They then scheduled a repair job for a week later with an unqualified technician, who naturally refused the job. Upon callback, I was rescheduled for a day two weeks hence. As it turned out, the repairman would not be near my home on the appointment date. Luckily, I tried to move the appointment up, as the repair service said Whirlpool did not supply proof of the extended warranty. I saved five days waiting time by rescheduling, but have to supply proof of extended warranty yet again. All this for a dishwasher that takes three hours per load, and doesnt do a particularly good job of cleaning.

Today, after five years of washing items in the Whirlpool Cabrio top-loading, HE washer; I am taking the time to express just how poorly this machines operates. Clothes do not get clean, dish towels with dried food still have food on them, and towels get holes. If I wash items with sand after going to the beach, the dryer vent has to catch all of the sand that was never washed out. Rust has developed on the inside and drips down to ruin clothes. I would take back my previous washer with the agitator that was over twenty years old in a heartbeat. When we needed a new dryer, we went ahead and bought a matching washer. Painful decision!