Whirlpool’s customer service is one of the worst I have encountered. They consider a 6-7 year old $1500.00 range to be old! I said to her, “Wow, if the population was to throw their Whirlpool appliances into the landfills after 7 years, this would be quite a horrendous situation.” I think its disgusting for a company to build appliances with a shelf life of 6-7 years and with only a 1-year warranty! What a horrible brand! I will never buy another Whirlpool brand product ever again. You spend $1500.00 on a range oven and then around 5 to 7 years the control board blows out and costs another $500.00 to replace plus a service agents fee to remove and install.I asked the Whirlpool agent if I could get the control board discounted and she refused and said, “I am sorry, we are unable to help you.” Pathetic! Their cost on these boards is around $120.00 or so. I was told by an appliance service rep they could discount that $500.00 board even half and still make a decent profit. Do not ever buy Whirlpool. Go with other brands instead. Their customer service policies are horrible. Your hard-earned money will be buying an appliance with a 6 to 7-year shelf life before major repairs.

Whirlpool Cabrio top loader washer - I am writing to really complain about a washer I bought there at Metro. The people were great BUT this washer has been a REAL DISAPPOINTMENT!!! It is only 4 years old and I have had to have them come and replace the top of the machine. It has rusted around where you put the bleach, the soap. It leaks underneath the machine, its rusting on the bottom of the machine horribly. SO DISAPPOINTED!!! We bought all WHIRLPOOL products - washer and dryer, stove, microwave, dishwasher.What is it with these things? They rust so easy. I had a washer before this one for 14 years and it never did this. I guess things are not made with the same quality as years ago, but I will not ever spend my hard earned money on WHIRLPOOL AGAIN!!! I guess I will have to put up with this machine till I can afford to buy something else. VERY DISAPPOINTED CUSTOMER!!!

I called Whirlpool’s 800 customer service line to let them know I was having a problem with this loud humming and rattling noise coming from my refrigerator because of a manufacturing defect (according to the service tech that came to my house to fix it). Apparently, the metal grid is being held by a flat mental hook which vibrates. What a loud noise. We cannot eat in our kitchen: the noise it terrible. The repairmans solution was to put a piece of rubber between the two metal pieces. It worked until he left. I told him it would start again and it did! I even let the customer service rep hear the noise and she agreed. I am in the early stages of my problem, but from what I have read I am not very hopeful. I would like to have the names and phone numbers of the people at Whirlpool who refused to help. Maybe if we would all band together and call them, they would get tired of hearing from unhappy customers and fix the problems. I am game. Anyone else?

We had Lowes install a Whirlpool model Nu40T121-403 natural gas water heater early October 2012. The temp controller went out in October of 2014. I replaced the controller myself at a cost of $30 for overnight UPS from the manufacturer, American Water Heater. The controller went out again almost exactly one year later and I again replaced it for the $30 shipping charge. In both instances the customer service person told me the malfunction was probably due to my not flushing the heater annually, causing a sediment buildup. The water to the heater not only flushed annually, but is filtered through a water softener and there was absolutely no evidence of sediment in the drain water or on the part of the control that is in the tank. Now it has stopped working a third time. I called Lowes about replacing it, but they only carry Whirlpool, so wont be buying a replacement from them.

Bought the above named model number Whirlpool dishwasher in Nov 2017 and it stopped cleaning 6 months later, dishes were instead of dry and NOW the motor is completely shot! Never again! This is ridiculous that the part cost more than the product! Worse that I need it repaired or a new one in less than 3 years!

I purchased a Duet several years ago and did not have a clue as to the problems everyone was having. Over the course of ownership I called the city to determine if we had a sewer leak. I had a plumber inspect our pipes. I felt really stupid that it took me this long to figure out it was the washer. I knew it smelled like mildew and have been using vinegar, afresh, Clorox until I am blue in the face. I didnt figure out that the sewers smell was also the same as the washers until I got on line and read about these machines. Finally, I lifted up the gasket around the door and it was completely black with mold. No amount of afresh was going to fix this problem. Do not purchase these front loaders. Feel like they should have been recalled and I really dont understand why they are still in circulation. I have also been having health/breathing issues and I cant help but think the mold is causing my illness.

In June 2003, I purchased a Whirlpool Gold Conquest Side-by-Side satina finish refrigerator (Model Number: GAS6SHAXLL03; Serial Number: SP1452552). The ice-maker has always had freezing up issues which I never complained to the company about. It has made weird noises (nothing major) but was already out of warranty. I paid $1,600-1,700 for it. I did not have the money to pay for repairs and I am sure that the repairman would have never found the problem. Two days ago, there was an electrical smell in the house. After an hour or two, it started getting stronger and stronger so my husband looked at the fridge. There was smoke pouring at the back of it so he pulled it away from the wall and we unplugged it. Surprisingly, the plug was not hot. Had I not been home, it could have caught fire, burned the house down and killed my dog! I am furious about this. When I called, Whirlpool says, That model is not under a recall. Would you like me to transfer you to service for repair? Really? Those big corporations dont care! There needs to be a recall on this because I have seen this same problem many times on blogs and forums. Well, guess what, I used to be a Whirlpool fan, not anymore! Now, I went and purchased a new refrigerator, and the brand name is Samsung! I recently bought a Samsung front loading washer and dryer and they are great. It looks like the Whirlpool dishwasher in my kitchen will be next! I bet Samsung makes a nice dishwasher.

LEDs on control panel started going out in four months. It’s a 400$ part. Under warranty but what’s going to happen in another four months? The range I had from the eighties was still working. You don’t get what you pay for anymore. Just excuses.

I count myself as lucky... my Whirlpool 465 Accubake Ceramic Cooktop stove was given to me. I have used it for 3 years. One day, out of the blue, the oven, which was in use, started clanging loud and jumping up and down. I started screaming & tried to cut it off & it would not go off. I ran to the panel box & threw the breaker. It also burned my food that was cooking. It did it several times. Then I decided to not cut the light on or touch the button to raise the temp. It has not done it since. I bake everything on 350 degrees and immediately throw the breaker. I am scared of this stove and plan to replace it. I will NOT buy a Whirlpool, anything. (washer/dryer/fridge/aircon)....once bitten...

I bought a 3 burner glass hob under your built-in cooktop category (model no. AKCG 930-90 cm) in Nov. 2015 from Coimbatore, Tamil Nadu. In the month of April 2015 I started having problems with the medium burner. The problems was rectified on 29-4-2017 after some replacements that cost me Rs. 5000. After two months again the same problem occurred, the medium burner was not igniting again, I registered a complaint on 5-7-2017, the representative came and did some maintenance and left but the same problem resurfaced after a few days.I was fed up of complaining and started using the burner during necessity by placing a weight on top of the knob. Finally on 15th Feb 2018 while I was using the stove the glass top cracked into pieces. My experience of the companys built-in cooktop is horrible and bitter. Every time I registered a complaint the representatives used to attend the complaint after 2 weeks and that too after so many phone calls. I am really dissatisfied with the service and quality of the product. I therefore strongly recommend customers not to buy this product.

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

We purchased the WRX988SIBM00, delivered 6-26-14. Immediately upon plugging it in, we noticed a seemingly loud hum to it. Thought maybe it would go away once the fridge cooled off, but the hum continues. SO sad because I love the features.

1st range arrived in June and would not heat to temperature. Sensor and control panel replaced. After 3 techs Whirlpool agreed to replace in September. 6 weeks later new range arrives. Protective film stuck to the lettering and when you try to remove it the lettering comes off. Chunk of enamel missing off inside oven door and defect in the glass cook top. Fast forward to today. THIRD range delivered. Same issue with the protective film and gouge in chalking around cooktop. Leons has been fantastic. They are replacing it with an entire new brand!

In 2013 we thought that we bought a 30 cubic foot refrigerator model no. WRF989SDAM from Appliance Direct, Melbourne, FL. Months later we realized that it was only a 27 cubic foot unit. Two months after the warranty expired the unit started failing. Called the dealer and was told that they would have the service department to call us. Never heard from the dealer again. Finally I called an independent service company. After testing the unit the technician told us that the evaporator may be leaking. They offered to replace it for a price of nearly $500 with only a 90 day warranty. Realizing that it would work at least 90 days after the repair regardless if that was the problem or not.I decided that we did not want to spent that much money. Having refrigerator experience in previous years, I decide to add a piercing valve and adding refrigerant. Every few months I have to add refrigerant to keep the unit going. This unit has run nearly all time since the delivery. Corresponding with Whirlpool is somewhat like throwing a bottle in the ocean. I also noticed that Whirlpool has dropped the price of this unit quite a lot, must be to loss of customers. And yes I am 83 years old and handicapped and never had a problem like this to affect me so much.

My Whirlpool Cabrio washing machine. f1 keeps showing up on washer on. Shuts off again and again.

I have called numerous times to complain about my new Cabrio washer. The first thing the employee did at the service center was to send me an owners manual, which I did not receive when I purchased the washer at Lowes. I followed all of the washing recommendations and still had problems with soap being left on the clothes. I called again and they said that perhaps there was something wrong with the washer and they were going to send a service technician out. I told her that he would probably not find anything wrong with it. I was just very unhappy with the product. She told me that we should check it out and not to worry. It was still under warranty and Whirlpool was going to take care of the service call. The technician told me that they have received many complaints about the machine, but there were no fixes available at this time. Yesterday, I received a bill from the service company for $129.00. I called the service company and told them that Whirlpool should be billed for this, not me. She told me that I had to call Whirlpool and if they wouldnt take care of it, I would have to. I then called Whirlpool, only to be told by the customer service rep that since they didnt find anything wrong with the machine, there was nothing that could be done. I asked to speak to someone else and she let me talk to her supervisor. She pretty much repeated what I was told by the first person and it is in the owners contract. I told her that I wanted to cancel the extended warranty that I just mailed in this week and she gave me another phone number to call. I cannot express how unhappy I am with your customer service department; the lack of compassion your company displays; and how I was told one thing and then charged a fee. It would seem that you have no eagles working for your company. I cant believe that a company as large as Whirlpool does not stand behind their products.

I purchased a Whirlpool Cabrio top loading machine approx 3 yrs. ago. When I first bought it, the machine was super quiet... loved it. I loved the capacity of it. About a yr ago I noticed it started making all kinds of noise, we cant have a conversation downstairs because its so loud. Turns out the bearings are broken. The technician was nice enough to explain to me that its a common problem with those machines. However, Whirlpool is not willing to stand by their product and repair it free of charge. Any other product would of been recalled and repaired. That goes for cars, baby products, and so on. But not Whirlpool, I called and spoke to Andrea in Michigan who told me that there is nothing that they are willing to do. After reading the other reviews and their terrible one star average rating it doesnt surprise me. Shame on me for not researching this product before buying. I hope this saves someone else from making the same mistake. In case your wondering, it cost me $117.00 to have the tech look at the machine. The labor would of cost $125.00 and the part is $251.00........

Ive read the reviews on this appliance. First of all the all of the washing machine being manufactured are designed to save energy and water. The water is loaded in the machine based on the WEIGHT of the clothes. the washing machines no longer have the features to (small, medium, large load) so the consumer can fill the machine. Having said that, most sales representatives will tell you appliances manufactured today are no longer designed to last 15-20 years, although they are way more expensive than the workhorses made in the past.I got rid of my fancy Samsung washing machine because it broke down at least 4 times within the first year of purchase and decided to go with the whirlpool because Ive had a workhorse in the past that was worked excellent. I love the fact the washers no longer have the agitator in the middle which allow me to wash my king sized bedding without the machine becoming unbalanced or making a lot of noise. So far the Whirlpool Cabrio washer and dryer is working very well. Id rather give the Whirlpool a chance any day over the new johnny come latelys, which are more aesthetically pleasing to the eyes but are failing miserably in performance. I also love my Cabrio 8.8 dryer. They both work better than the Samsung models I got rid of.

Whirlpool washer cabrio WTW7800X - Lid broke for the second time in less than a year. It is a defective part. Whirlpool should recall it. I will never buy Whirlpool again. The lid costs more than $200 + labor to replace.

Within six months, the plastic surrounding the oven and the plastic handle began began to crack. Company was of no help. Also, the screen says to change filter, even after you put in a new filter. Extremely disappointed.

What can I say. Pretty much a generic refrigerator that is manufactured and sold under various brand names. Nothing special. Keeps food cold. Ice maker takes too much freezer space but thats typical. Interior LED lights failed after a few months. Flicker sometimes. Out other times. Internet research finds this to be a common problem. Zero quality in Whirlpool appliances. I bought four Whirlpool kitchen appliances and ALL have had problems. The only way to own them is with a 5 year extended warranty.

I purchased a washer and dryer through Best Buy. I had already decided on what I wanted and have purchased Whirlpool appliances in the past including washers and dryers. I tried other brands and was disappointed so I wanted to go back to using Whirlpool w/d. I was encouraged to purchase this set because it was on sale. Worst mistake I ever made. I am so disappointed! I wish I could go back and do over. I would have gladly paid more for what I had wanted instead of saving (supposedly) a little money. I personally think they were trying to get rid of these models because they are awful and I have had so many problems doing a job I already dont but this set makes it worse. The washer is constantly off balance I think because you have to be so strict in how you lay in the laundry to the washer! Now the dryer takes even longer to dry my clothes than my twenty year old set (Maytag) which wasnt that bad. Is there any kind of trade-in I could do model: WTW4900B to get the set I really wanted (the models with glass top on washer and glass door on dryer)? I purchased this in April 19 of 2014. I hate it!

I’ve had the dishwasher for at least 3 yrs. if not longer. I have a long history with Whirlpool products and so far I haven’t had any problems with my past purchases. They normally wear out from age because if you take care of it normally they last for years.

Bought brand new, Whirlpool front load washer and dryer, from Corbeil. Got both items home and connected and levelled (yes I took out the shipping bolts). Did my first washing and watched my new washer dance across the floor. Called Corbeil and they told me no refunds. Best they could do was to send out a Tech to check it. Tech came, changed the shock absorbers, a token act because the machine danced as much as it did before. Please for your own well being DO NOT buy this product and DO NOT buy from Corbeil. There are other products on the market that advertise items that dont shake.

Whirlpool has been around for years. This is my 3rd machine. I had both washer and dryer. But machines today arent made like they use to. They breaks down easily. The parts are cheap. I had a Samsung washer. It was one of the recalls. I got ripped off by Samsung and Best buy. I have received the full value.

This washer is only a year old and out of warranty. At first I was getting white stains on dark clothes and now I am getting unremovable oil stains on all of my clothes. With the white stains I cut back on dry detergent and went to liquid. It did not help. On black stains I sorted clothes very carefully so that nothing dark or black was in with other color or white clothes, still the same stains. Brand new capri pants ruined with first washing. I have tried cleaning the machine with bleach as recommended, did not work. Whirlpool and Sears deny they have ever had a complaint. Yet there are hundreds of the same complaints on the internet. Is there anything that can be done.

My wife and I purchased our new home in November 2014. The house was a foreclosure and therefore owned by a title company who gutted the home and installed all new appliances. Less than a year of ownership, the ice maker on the side by side fridge broke after normal use. Not having proof of purchase, I appealed to Whirlpool given the nature of my situation. They did NOTHING but try and sell me a new service agreement they offer to have it fixed. They cared little about my brand loyalty, situation or circumstances - all they wanted was to make more money off of the consumer. What ever happened to companies being accountable for the products they produce? What ever happened to companies wanting to do the right thing in order to retain loyal customers and increase satisfied word of mouth? Stay clear of Whirlpool... Theyre only out for themselves.

Brand new dishwasher and first time I started it I noticed the timer showed the cycle taking over 3 hours. When done I opened the door and there was some water in the bottom and the door was very wet. Dishes had not been washed. A glass that had turned upright had no water in it. The soap pod was still intact. I started over again and the same thing happened - two more times. The silverware is not clean either. Its going back!!! Im sure there will be resistance but we will deal with it.

I have owned Craftmaster 30-gallon hot water heater and the only things reliable about it is trouble and aggravation. I purchased this in 2004. I have had to replace the controls, valves, wires, etc. three times in 10 years. And Im now looking at doing it a fourth time. The design of these parts are utter crap! Cheap plastic! After replacing these parts, this hot water heater works great for a few years, then invariably starts acting up. The pilot light goes out when the heater is supposed to kick on instead. Getting the pilot light lit again, is an exercise in futility! The red reset button once released, immediately extinguishes the ignition flame. Supposedly, after holding it down for 1-2 minutes allowing gas to build up, it should light the coils... and if it doesnt, youre supposed to wait 10 minutes to try relighting again. You can repeat this process for 12 hours, and if you finally do get this temperamental piece of junk to light, youre lucky. Customer Service has been useless in assistance. All they want to do is send you e-mail, and get you off the phone. Not to mention, Ive been told by many a rep that the hot water heater extinguishes itself, if water is overheated, and that it must be my fault for setting the temp too hot. Baloney... Ive been told that the underside vent must be cleaned every few months, so that air flow is accurate. Makes no difference one way or the other. And recently, Ive been told by a rep, that my 40-yr-old house likely doesnt vent exhaust out through the roof properly. This product is inferior and unpredictable. Its great when it works, and the pilot light stays lit. God forbid it ever goes out though! It is next to impossible to relight. I have spent more money on service technicians attempting to repair/replace parts, than it would have cost to simply by a new hot water heater. I miss the old days, when it was easy to light a hot water heater: Strike a match, turn the gas on, and instant hot water. No muss, no fuss. Having owned many properties w/ hot water heaters over the years, I have never encountered such repeat problems, as with this product. Its simply not reliable, and not worth the $$$. Never again, will I buy a Craftmaster Product. And I had no clue that there was a Class Action Suit filed, and a settlement involved in these faulty units. Whirlpool/Craftmaster should have notified everyone, who purchased one of their units. Now Im stuck w/ a constantly broken unit, and zero recourse. I will never buy anything Whirlpool/Craftmaster again, as a result.

I bought a Whirlpool High Efficiency top load washer. It does not get the clothes clean. Dark clothes come out with spots all over them. There is not enough water to rinse out the dirt. It is left on the clothes in spots. I have to take my clothes to the laundry mat to wash them to get them clean. I am 74 years old and have used Whirlpool appliances all my life. I have dt3 rental houses I keep Whirlpool appliances in. But I wont be buying any more. I had to call the repair man one month after I bought it. He had to recalibrate the machine. If all you want to wash or maybe rinse out is a pair of slacks or a shirt, it might be o.k. but not a load of dirty clothes. It is just a JOKE.

We started noticing pools of water on the floor on the left side of the freezer. We would then open up the drawer and it was covered in ice. The water was not noticed until the morning so it has caused damage to the floor and molding in our house that was built in 2012. I called the repair company that I used to have my Whirlpool oven fixed (broke twice). That is when the manager gave me the lowdown on what has been happening with this fridge. He told me to call Whirlpool and have them pay for the repair and part and to research online, that it is a design flaw with the freezer and the p-trap and draining under the ice maker being not efficient.I called Whirlpool and complained. All of my appliances are Whirlpool and I spoke to a Supervisor. They only would not agree to pay for the repair and only will pay for the part (which is only $27.00). This fridge is 15 months old and I am irate at the lack of customer loyalty from Whirlpool. They responded the exact same way when my oven broke a month out of warranty. I will never buy another Whirlpool appliance again, and would like buyers to be aware before they buy an almost $2,000 fridge.

We bought our Duet washer in 2007 with a three-year warranty. In 2010, the washer started banging so we called it in for repair. It was determined that the bearing on the drum was bad, so the entire drum assembly was replaced because the poor design of integrating the bearing into the drum. Almost one year to the day, our washer started banging again. The washer is no longer under warranty. We were told the parts are around $400 plus and another $400 for labor.The repairman was from the store we bought the washer and he is a certified Whirlpool repairman. He related to us that this is a very common occurrence for Whirlpool washers because they are using cheap foreign made bearings. He services this problem on a weekly basis and Whirlpool will not do a recall because unless it is a safety hazard, it is not a concern to them if consumers have to pay out the nose for cheaply made parts. This repairman informed us that during training at a Whirlpool class, he learned that on the main board of the washers, they could put a 2 cent lamp that would indicate a bad board which would simplify diagnosis, expedite repair and reduce service time, but Whirlpool wont do it because it isnt cost effective. The repairman told us that we can call customer service until we are blue in the face, but Whirlpool wont give a ** because it is out of warranty. He sees this happen all the time with Whirlpool. My wife called Whirlpool Customer Service just to be told we are ** even though the cheap, crappy bearing that went bad was done under warranty, a year earlier.Well Whirlpool, I guess you lost another customer who will make sure that you lose a lot more customers. We are going to take our business elsewhere and we will make sure all our family, friends, neighbors and coworkers know how bad your customer service and poor attitude is toward consumers. If you cant back your products when you put cheap foreign garbage parts in your product, then you need to lose business and get out of the market.

My Whirlpool stove and oven have been absolutely wonderful. My Appliance is 18 years old and Ive never had a problem with it since the day I bought it. I recommend Whirlpool appliances for the whole house.

I bought it on 11-24 13. I called Whirlpool on 1-29-13 and got no response. I called 3 or 4 times and still havent heard from them. Its now 4-1-13 and still nothing. I tried many times and got the runaround from them. They owe me money for repairs to the heater. I will not ever buy from them again. Just thought you all should know about this.

Bought my 5 door refrigerator from Lowes in December 2016. Was delivered in January. Had a dent in the door so another new one was ordered that arrived in late January. From day one the dual ice makers have not made enough ice for our family. I called Lowes to have it checked out thru warranty. The repairman came out and said Its making ice. I cant fix something that is not broke. He suggest I buy a under the counter ice maker. What the heck! I pay over $3000.00 For dual ice makers and still dont have enough ice to supply my family. Cant believe Whirlpool puts out a dual ice maker in a refrigerator and it cant even supply a family of 5. The repairman said a normal family size is 3. I dont know where he came from but to me thats not normal. He was from Tutor Appliance Repair and was very rude until he realized he pissed me off then he blamed it on Whirlpool. The refrigerator is beautiful but Id rather have my old one. It made more ice than this new one does. Will I buy whirlpool again? No I wouldnt. If they cant stand behind their product and what its suppose to do then I dont need it. Bad thing I have to deal with this one for a while until I can purchase a new and better one. If you have this refrigerator dont plan on having guest or family dinners it will not hold up for ice tea. Not to mention after dinner drinks. Model # WRV986FDEM01. SeriAL # K63817128.

Twice purchased washers Cabrio and both after 5 to 6 years break down showing f1, f2, UL codes. Shame on this company. They refuse to give us a particular time to fix it and have the nerve to charge us for the visit without fixing it first.

We bought a Whirlpool with convection oven, it is beautiful and very well designed and fully electronic. You can only control it via touchscreen Which, when the software runs into blocks, it is impossible to troubleshoot efficiently, you just have to wait until it completes its rebooting. It is very frustrating to spend hundreds of euros in a device you just cant control when it crashes. Horrible programming made for a horrible user experience. You have the feeling of not being able to use it or fix, it is like having a mobile phone or computer Which only works on what appears to be a random logic. The errors displayed on the screen are often vague and the user troubleshooting manual is just plain short. We will return it without doubt and dont recommended ever buying this device.

Within six months of moving into our new condo, the microwave started making noises like something was loose - like a fan or something - it would sound as if something was catching and would be quiet and then begin making noise. Mostly noisy but once in a while quiet performance. In talking with adjacent condo owner, he said his had just started making the same noise. Asked some of the other neighbors; many said the same thing. Some had theirs repaired; others were ignoring. We had all moved in within a few months of each other in our Phase of completion.Called Decker and Sons where microwave purchased; they said Too bad. Call Whirlpool direct. I did. Was told I could pay to have repaired through a service company. When I said several residents had been having the same problem and it would seem a recall should be made, I was told that 250 similar complaints had to be received before a recall would be considered. If I could find that many, I should contact Whirlpool. Well, that was obviously not possible. My next door neighbor had his repaired before he sold his unit; the new owner recently said she had just replaced the Whirlpool stove because of the poor oven performance (which I have also experienced even though I ungraded) and microwave due to the noise it made. I have also learned that three other neighbors paid over $100 each to have their microwaves fixed over the last few years. I have just continued to use mine. Today an error message came up but a motor noise continued. Came to my computer to check on Error Message meaning and found this site and registering complaint for an obviously poorly constructed/engineered microwave. Obviously, Whirlpool does not care or listen. I will not buy another Whirlpool appliance! I will do my best to warn anyone purchasing appliances to not buy Whirlpool. Had the company admitted poor quality, no problem, as a production problem can occur but to knowingly disregard and ignore is inexcusable.

If you are in the market for a new refrigerator, STAY AWAY from Whirlpool Top Freezer models. Mine just failed after only 5 years and Whirlpool will NOT do a thing about it, except ask, Did you buy the extended warranty? The compressor in my refrig was made in Mexico by a company called Embraco. I used to work for Whirlpool and these compressors were garbage then, and I guess still are, in my opinion.The 5 year sealed system warranty was removed from these refrig years ago and I can only assume this is why. If you want the 5 year SS warranty, buy a side by side or French door model. Just be sure it doesnt have an Embraco compressor on it! And while I am not a believer in them, planned obsolescence dictates you probably should buy the extended warranty/service plan for such a purchase. Dont rely on positive past experience, even for a company like Whirlpool. Their gold ring of promise emblem is very tarnished for me now.

We bought this Whirlpool two door side by side refrigerator freezer at Lowes at what seem like a good deal, until the problems start. On the refrigerator side everything freezes just as solid as the freezer side. We get to looking and find there is no air filter/damper installed. Try to call Whirlpool and you can forget it. 37 Minutes wait time, then a recording comes back and says now your wait time is 47 minutes, long story short you just get put on hold. No help what so ever. Lowes did give us an air filter. But we still got rock solid fresh eggs in the refrigerator. So it was not such a great deal after all. My wife has one big headache and mad as a hornet at Whirlpool. Bet we dont buy another Fridge from them. If I were you Id stay away from Whirlpool products. Have a great day.

Friends and family dont you ever dare to buy a refrigerator from Whirlpool - Best Buy!!! They sold me a defect refrigerator and after 2 months begging to see a technician, they are telling me that they are going to fix it. Im so tired of them trying to fix it. Theyve been here 4 times with no luck. All my food is rotten and frozen. And its a new refrigerator. Gosh. As you can see, the water in the plastic cup that I left in my refrigerator are frozen which is not supposed to happen. I feel that Im dealing with nonsense. They dont care. They just took my money and thats it. Im left with a new defect refrigerator that doesnt work. Ridiculous.

Its a big buy to decided on fridge, bought one last year and the drawer keeps popping off the plastic piece. Who designs these to where the piece isnt long enough to stay put. The Veg filter in the back came broke so it doesnt stay on. Just upset to pay that much and have a really cheap product.

Such an expensive refrigerator but poor quality. Bought at Home Depot back in November of 2019. The bottom Freezer freezes up messing up everything only three months after purchase. I wouldn’t recommend it at all to anyone.

Purchased washer Aug 2012 and has increasingly been leaving white residue after wash cycles. Have used the Extra Rinse function to no avail and use half the recommended amount of HE Tide. Now I have to run the Rinse, Drain, Spin function twice with darks to remove the residue. I have also been doing the monthly maintenance which has not helped at all. This machine seriously detracts from the Whirlpool name and if they are unwilling to fix the problem, it only publicly displays the companys integrity.

Purchased 2 sets of the full sized refrigerator and freezer combo. First was 2005 and second was 2015, both new build homes. We had a few probs with 1st set but the 2nd has been a nightmare. Just like others we have lost time and food because of the constant problems. Avoid @ all costs!!!! Apparently they only care about lining their pockets and not the consumer.

My dryer has to run twice to completely dry my clothes. I had it serviced still a problem. My washer has had some issues but repaired and working fine. I will never buy this name brand again. Not sure what I will buy next.

My refrigerator & dishwasher were purchased less than a year ago. Ive already had all the doors replaced on the fridge and the new ones are rusting. Discovered same issue with the dishwasher. The company doesnt seem to be overly concerned with remedying the issue. No sense of urgency or concern for the customer.

I purchased a Whirlpool washer and dryer from Best Buy. I purchased one on sale that was a great value. The delivery and set-up went well. However, the model I have had a loud vibrate. The drum in the washing machine would wobble and shake across the floor. I finally had to return it and replaced with same model. I experienced the same issue after 30 days. I didnt take the insurance out and I regret that move.

My wife and I purchased a Whirlpool Cabrio washer 1 year and 4 months ago. Its just three of us in the house. We never overload the washer. Now the drum bearings in the washer have gone bad. I feel that a washer should last longer than 1 year and 4 months. I signed up for the Whirlpool Repair Plus 1 Service Plan which is supposed to cover repair plus 1 year additional warranty. I was told that it would cost more than $1000 to repair so they would only return service plan cost. Whirlpool used to have a dependable product and dependable service. I dont think I will be buying another Whirlpool.

Purchased this electric range Maytag model YMES8800FZ1 in September 2017. Thought it was just like my old range with self cleaning mode. Beware! Do Not buy this or anything with this new AquaLift self clean technology. That means youre down on your hands and knées, scrubbing. It doesn’t work. Read all the reviews about this new technology. Salesman never informed us. We innocently bought the range with self cleaning, paid lots of money, for crap! Very upset. Will spread the word for all future buyers, pay attention to the self clean mode on what youre buying, cause no one will tell you. Now trying to reach Maytag, but apparently they don’t care.

We bought this fridge 1 year ago. We have already been without a fridge from Oct 2016 to Jan 30, 2017 due to a drawer going bad which caused the whole thing to quit. Now it has an obstruction in the Freon lines that causes it to freeze up and not cool. It was deemed not repairable by service company sent by Whirlpool/KitchenAid, and yet they want one more test run. The last person I spoke with at customer service had a flippant attitude and said there are no notes. What they do is drag you along for so long, make you wait and abuse you with tests, and hope you finally give up and go away. I will never buy another thing with Whirlpool/KitchenAid stamped on it!

Why would I, and others buy Whirlpool made washers, with all of these service problems? Now I understand why they have profit/loss statement problems, and stock prices in the pits.

Cabrio is our washer and dryer. Dryer had no issues in the last 7 years. Washer constantly throw UL or unbalanced error and stops. Rearranging clothes only works for another few minutes. First time under warranty, tech came and fixed it. Second time without warranty, I cleared some loose socks between the tub. Third time same problem. YouTube suggested to change the springs on four corners that hold the tub. $25 and problem fixed. Basically, if you are not an informed consumer you are screwed for $$ silly stuff.

I bought a dishwasher Gold Series Top Control Whirlpool dishwasher at the Home Depot, April 4, 2015. Paid six hundred ten dollars and twenty-eight cents $610. 28. I noticed soon after that the top shelf falls off the rack when loading at front. I began loading from the back. It worked for a while but now it totally fall apart. The door will not close and I am unable to use the machine.

This oven/range (W10665261B) has a cleaning feature that DOES NOT WORK! Do not buy unless you want to hand scrub the oven without any cleaning products. No one at the company cares. I will discard the oven.

Bought a Whirlpool fridge (WRF560SFHZ) 3.5 years old not cheap! Suddenly one day, the freezer drawer cannot close properly. Since it broke down on a long weekend, I have to wait 3 days in order to contact Whirlpool customer services. And then wait for another 4 days for them to send a technician. The technician advised it is a screw on the rail fall down and he fixed it and charged as 115CAD repairing fee (for a loose screw). He said it is a product defect from Whirlpool and that we should call Whirlpool to ask for a refund.Of course after a long wait from the hotline, Whirlpool refused to refund, saying that, It is not within warranty period and it is perfectly normal that you paid for 17** CAD fridge and can only used for 3,5 years and that things happens (screw can get loose). The service rep. even said, You bought it, it is your property now... And they dont care you have to throw away food in the freezer since the door cannot be closed. And of course they refuse to admit that the product has an inherent defect... Will never buy this brand ever again!

Whirlpool Cabrio Model Wtw8000BW - Purchased machine Jan. 2014. It does not wash my clothes clean. Clothes come out with dirty streaks all over them. The clothes I dry on a line smell dirty, like they werent rinsed properly. I have been cleaning the machine the first of every month per the instructions. I will never buy another HE washer again, this is my second one. Purchased a new one with an agitator.

The product has water and ice maker problems. The day we got the new refrigerator home, it did not make ice for one week. I called and had service come out. The line was not connected properly under the refrigerator. Water was flowing out of the front of the refrigerator. I called service again and they put in a new ice maker. The ice maker was still not working. I called service and another firm came out and said the new ice maker was bad. They put in another new icemaker. Now it is making ice but will not dispense it through the door like it is supposed to. I will call service again on Monday.

I bought a 50-gal. Whirlpool electric hot water heater about 6 years ago from Lowes. About every two years, something goes bad. So far, I had to replace electronic control board that sits on top of heater twice. Then the heating element went bad. Well, this time, the electronic control board started to smoke and melt. I was home so I smelled something melting and found it. What would have happened if I was not at home? I have dogs that are like my kids; they could have been killed. Whirlpool wants to send the replacement parts knowing this part is no good. Do not buy a Whirlpool electric water heater! Now, Im scared the next time I wont be at home to find the thing smoking. I dont have money to buy a new one. How many other people have the same problem?

I purchased a Whirlpool side by side refrigerator in Jan 2014. The first thing I noticed was the installers bought the appliance in without a box. The next thing I noticed was the door would not close unless you gave it a big push. While looking around at the hinges, I found 2 hairline cracks at the base of the refrigerator and 2 dents. I called Service and they sent a technician out. The technician told me they are going to want to epoxy this and you will see it. They asked did it get delivered in the box, I said no. I asked why, she said it should have been delivered in the container so you would know that it is new and not a rejected one from a customer. I called Whirlpool to voice my issue with having this epoxied. Kecia was the CSR...she said that is the normal repair for a crack. I told her I had a Kenmore refrigerator for 23 years and it was still functional when I bought this. I replaced it to get the energy savings. I told her I wanted the refrigerator replaced. I told her that the cracks tells a story about the quality of the appliance. I asked her what happens if these cracks expand after the year warranty expires. She said you can buy the extended warranty. I said but the existing warranty will not cover the cracks...what will the the extended warranty do? I asked if there were any recalls...she said no. I asked have there been similar complaints about cracks and dings (not that I thought she would answer yes). She said no unless someone had stepped on the base of it. I told her I lived alone and I definitely did not step on the base of the refrigerator. She got aggravated (almost to the point of being rude) and said Mam, no one said you stood on the base. I asked her repeatedly if there was someone else I could speak with. Her repeated answer was I am authorized to speak with you. She wouldnt let me to speak with anyone else. I am done with Whirlpool and stuck with this substandard refrigerator. Not happy at all in Va.

My new washer quit working properly. It does not spin or wash properly.

The plastic frames for the glass shelves are cracking at the corners and the only option Whirlpool has given me is to replace the shelves at about $150 each. Needless to say, the cracks started just after the 1-year warranty expired. If only one shelf was cracking, it could be my fault; but since all are cracking (some on the front, some on the back and some in multiple places), I believe this is a design flaw and should be covered by the manufacturer. When I call, I can only get through to someone to schedule maintenance or order parts. What can I do?

I bought the WTW4815EW0 Whirlpool washer. Worse machine ever! It’s take forever to wash a load, there’s no way it’s efficient when it takes twice as long to wash one load. It doesn’t sense the water level correctly, Its noisy, and after only having it 3 years it crashed on me. I refuse to waste money fixing the piece of junk and when I go to purchase a new one it won’t be a Whirlpool.

I was having trouble with our Whirlpool water heater and thought that wed have to shell out and buy a whole new one. Chris saw my complaint and helped me find the right replacement kit at a minimal cost, as my unit was out of warranty. He even took the extra step and overnighted the parts for us at no extra cost. I was extremely impressed with Chris professionalism and customer support skills.

I purchased a Whirlpool Gold top freezer refrigerator (G2IXEFMWQ03) in May 2011. Six months later, the freezer began to collect frost and eventually clogged the refrigerator port from freezer. Since cold air from the freezer was not going to fridge, I had to turn down the refrigerator temp to lowest setting. I had a service person come out and replace Adaptive Defrost Control under warranty - it would have cost me around $250. Now roughly 12 months after repair, the defrost issue is back. The part cost me $175, and that is if I install it myself. I called and mailed Whirlpool which was a waste of time. This is the last Whirlpool I plan to purchase. For the same issue to occur in this short time span, it has engineering flaw written all over it.

Purchased Whirlpool clothes washer Cabrio Platinum about one year ago. Never sufficient water to clean items. Appears that there is no way to add additional water to ensure that items are cleaned. Many items come out dry and still soiled.

We got a DEAL for this nightmare for nearly $700 back in 2014. Nothing but problems. Constantly finding plastic pieces at the bottom... some identifiable; others not. They are from the cheap parts within. The control board lights (all but 1 works) went just after the 1 yr mark. We are now having to replace the top Rack Adjuster (MORE CHEAP PLASTIC), as it has been barely hanging on for the last year and a half... constantly fighting it, as it would drop all the dishes if you moved it wrong.Now, the water is not draining at all... period. We clean this religiously - always rinse dishes completely, use rinse aid, never stuff dishes. Today we find a random plastic piece, which we are now trying to identify. NOTE: we dont put plastics in the dishwasher. So, today a new plastic piece and major drain problems. We are in the market and purchasing a new French Door Refrigerator and Front Load Washer. Will NOT be going with anything Whirlpool. Not much better these days, but this name has a big RED NO for us. Made it even worse when we contacted for help after that 1 yr mark. NO HELP AT ALL.

Whirlpool wdf530plym4 - Bought this dishwasher 5/13. Sat for 3 months in the box while my kitchen was being built. 7/14 pump motor went out, called Whirlpool, they set me up with an appliance repair company, and I ended up paying $90. The technician was being nice, charging me less than he needed to since he said it was an easy fix. 1/26/2015 pump motor went out again. Called Whirlpool again. Lady on phone was very snooty with me, telling me it was out of warranty. Told them I was very dissatisfied, my dishwasher has broken 2x in 18 months and all she said was, I should have bought the extended warranty. Dishwasher is not even 2 years old and already needs to be fixed 2x. The most expensive part on the machine I may add. Going my average, I can keep dumping $130 every 9 months to have a working dishwasher by Whirlpool. I would understand if the thing broke after 2 or 3 years. I only run the thing 2 or 3x a week at the most.

We bought model WRS571CID*** which has an in-door ice maker that has stopped working after exactly 3 years. An excellent authorized service rep advised that the wire harness from the freezer to the door was damaged by chafing from normal opening and closing the freezer door, which has caused the ice maker wires to break, thereby disabling the ice maker. The only remedy is replacing entire the door, which would cost $1700 according to Whirlpools published repair data, which he is obligated to charge. Apparently, the wiring harness is not a replaceable part, because I suspect the labor hours needed to disassemble and reassemble the door is prohibitive. Well, a new fridge costs about the repair. I spoke to the Whirlpool company about whether they acknowledge that the design is faulty and that the door should be replaced at their expense even out of warranty, and they declined.So I advise prospective buyers to be aware of this issue and watch other reviews. There are many customer reviews on various sites complaining about this very issue. Our workaround is to put ice trays into the freezer to make ice, and while the dispenser still works, pour the ice thus made into the ice dispenser manually - until the wire control that also becomes damaged and stops working. I would not recommend buying this model.

I purchased a water heater in 2011 and have had the thermostat replaced at least 5 times! Now, not only does the heater not heat the water, but it has rusted through and ruined my floors! They say they will replace the thermostat (oh yeah, yet another one!) but what about the crappy thing in the closet. I will NEVER buy anything that says Whirlpool on it. They dont stand behind their product and have made no efforts to correct the issue. There has to be a lemon law clause that would be applicable in here somewhere.

Home is new construction. Moved into our home in May 2015. All appliances are Whirlpool. The Microwave (model WMH32519CS-1) stopped heating in September 2015, service tech replaced the tube and capacitor. Microwave stopped heating again on Nov 16, 2015. Service tech notified again. Each time it takes 3+ days to get the service tech to look at the oven. This will be the 3rd Magnetron Tube in 6 months. This should not be happening. Contacted Whirlpool direct, asked if we could get the entire oven replaced with a new one. I was informed that this was not a company policy. It was a real waste of time talking to customer service. They are clueless and could care less about what is happening with our oven. I have had microwave ovens for years and have never had this kind of issue. Whirlpool has a real problem here.

Just bought what I thought was going to be a great dishwasher. It had all the features I wanted. But, I discovered that none of my silverware would fit in the slots provided in the silverware basket. It is a disaster. The slots are so tiny that most of them are unusable. I called Whirlpool thinking that surely there was another basket I could substitute, but no, there isnt. Everyone was very polite, but the end result is that the Ill be handwashing most of our silverware. Unless your silverware has very narrow handles, forget this machine. Obviously designed by someone who has never loaded a dishwasher!

Our daughter has a Whirlpool Duet front loader washer & dryer combination which is less than 3 years old. The washer shows fault code 71 and will not run or release the door lock. The first repairman said the interface board and/or a computer will need to be replaced. Cost is $600 to $1,000. I called Whirlpool. They recommended their trained tech be called out. He looked at the broken machine and determined the interface board was bad, and he put a temporary repair on the washer and said Its okay to use for now. He will return in 2 weeks with the replacement part. We tried the machine with a load of clothes. The machine filled up with water then quit, and the door was locked. We called to get a tech to open the door so we could retrieve our clothes. No one is available for 1 1/2 week. I called Whirlpool and was told a claim form would be mailed to me so we could be compensated for the damaged clothes. The letter arrived. I was appalled when I read it. First, it came from their Legal dept. The intent was to scare us into getting a lawyer or just use our homeowners insurance for the damaged clothes claim. I called Whirlpool back several times and was told too bad, so sad. Whirlpool might make a good machine; they cant prove it by me but their support rates a big zero.

Ive owned this Whirlpool, bottom freezer refrigerator for two and a half years now. About a year ago I began to notice water on the floor in front of it. I had the ice maker hooked up, which I never used, so I disconnected that. The problem continued. I discovered that the bottom of the freezer compartment would fill with ice and once full the next dose of water would flood the surrounding floor. I have cleared the ice out, on a weekly basis, but have still had the water flow onto my floor. Its a daily thing now as Ive gotten tired of pulling the unit out and removing the ice build-up on a weekly basis. My replacement refrigerator will not likely be a Whirlpool of any model.

BEWARE THE TEMP CAN BE 25 degrees off high and 25 deg lower and Whirlpool says that is within specifications. My oven temp was set at 350 and nothing was cooked... After 7 repair calls with their certified repair companies (the 2 worst repair companies that I have ever used) I was told that if you set your oven at 350 that if it stays in between 325 and 375 that Whirlpool claims that it is working fine and will not do anything. I called and talked to customer service and asked the lady that if you set your oven at 350 should it stay within a few degrees of that and she said YES.The people that work at Whirlpool do not even know what kind of junk that their company is selling. I asked to return it and get a more expensive model hoping that it would work better but they said that they sell ovens and do not buy them. Be sure to get in writing from your sales person that your oven will constantly hold the temp within a few degrees. I tried to do the Whirlpool survey but after 11 attempts they said that there was errors in receiving and they did not get it. If you buy Whirlpool then you did not ask the right questions. I WILL NEVER BUY Whirlpool again (unfortunately I have a Whirlpool dishwasher and refrigerator that are not much better) and if you do you will say the same things and be out Thousands like I am.

The unit I live in is at **. They purchased it in Nov 2011. The washing machine worked for 2 months. Now, it has to be dismantled at my home and take a day off. I would like a replacement. The Dutchgate is still being developed. They purchased at least 60 at this point, there is no reason not to give me a new one instead of having two techs dismantle the machine in my new home for 4 hours and a day off of work. Model WFC7500VWl, serial CD13528709. Please try to assist me.

I purchased the machine December of 2010 from Lowes along with the matching dryer. I also purchased an extended warranty. A year ago July the lid on the washer broke at the hinges. I contacted the warranty provider and was told that the repair would not be covered under warranty and the damage was operator error. I purchased a new lid for approx. $250. One year later the replacement lid broke in the same location. I have tried to get a response from Whirlpool no response. I contacted Parts Select and inquired about changes that should have been made to correct the lids. He was not aware of any changes but did advise that the part had a new number which he indicated probably meant a design change. I ordered a new lid just under $250. New machines have a metal frame around the glass instead of the plastic frame which keeps failing. The springs that hold the lid in the upright position are so stiff I can hardly move them by hand. I am very disappointed in Whirlpool quality and consumer support. I will not purchase any more Whirlpool products.

WARNING: Do not get the warranty plan through Whirlpool if you have stackable washer and dryer, you will have to remove the dryer yourself before they come out to service your appliances. I was willing to pay extra to have them take it down, the contractor said I had to call the extended plan service, yet 6 telephone numbers later to include the complaints department to no avail... Whirlpool contracts out so get your own and you may save a few dollars!

I am a Licensed Plumber in Oklahoma, have been for 25 years. Our company will no longer work on Whirlpool water heaters, heres why. I diagnosed a water heater that the pilot would not stay lit, the thermocouple was bad. Whirlpool Tech Support told me to go to Lowes and buy the parts and send them the receipt and they would reimburse me. The customer was furious that I charged them for the part and I told them when I got reimbursed, I would send them the money. Well, I not only never got any money from Whirlpool but I never got paid from the homeowner who was mad at me and I didn’t even sell it to them. Beware, buy Rheem.

We purchased a Whirlpool refrigerator on 4/6/2011 - Model No. G17FVCXWQ00, SIN No. K01044078. Since that date, we have had many, many problems with the ice maker not making ice and jamming with ice cubes. If we use ice, then it will not make ice for several days. We had a service man come and try to fix this problem but the problem still remains. What can we do to get this problem resolved?

The company I work for bought a new washing machine a couple of months ago to make it easier for those that do the laundry here. The washer was suppose to be this great washing machine which has turned out to be the biggest piece of trash on the property!! Every couple of loads you have to turn it off and hopefully the computer in this Whirlpool cabriolet will reset so you can wash a load of clothes. You have a 50/50 chance it will work. DO NOT PURCHASE THIS MACHINE. IT IS THE WORST WASHING MACHINE IVE EVER USED!!

My KitchenAid side by side refrigerator/freezer is a beautiful thing, shiny steel surface, gleaming white inside. However, its made poorly. The ice cube maker compartment broke and the replacement came without any installation instructions. It was hard to figure out and I broke it. Now, everything in the refrigerator is freezing and changing the temperature on the digital panel makes no difference. McKinneys appliance, where I bought it, no longer has a refrigeration technician and they referred me to Whirlpools 1-800 number where I supplied some information and sat in my chair on hold listening to music for a half hour before hanging up.The recording on the phone suggested their online chat where I was asked the same sorts of questions and was told I would get the answers I wanted by paying $5.00. I had no idea what I was getting into but I didnt pay, just terminated that inquiry. Feeling cheated by the company whose product I had mistakenly purchased. Im now running the risk of a technician visit, sometime between 8 am and 4 pm a couple of days from now. I have to be prepared to wait around all day for somebody to look at my refrigerator, charge me a lot of money and, from what Ive read online, potentially see the problem return in a very short space of time.

In 2006, I paid $1,300 for above fridge and bought extended warranty. Within a year, I had four service calls for condensation in bins that causes freezing of lunchmeat, veggies, etc. and anything put in them. The A&E service company said to use plastic bags and then said I should keep the bin drawers open at an inch so air could flow. Next call said vacuuming underneath would solve it. Final call said again to use bags and suggested modifying the fridge by making a hole in the sidewall (which would nullify the warranty).Since I declined modifying the fridge, he contacted Whirlpool saying I declined service. I still have this problem, was going to call for service because I could really use the space the drawer provides but I have a feeling I will just be throwing money away. I was going to contact Whirlpool but Ive done that too. I feel totally ripped off on an item that should have quite a few years of service left.

I have had my Whirlpool side by side for over 12 years. The 2 minor problems it has had, the repairman replaced the parts and she’s working great. Hope I’m not cursing it. Whirlpool 19.8 cu ft. Model EDOGTK.

I paid $1246 for a Whirlpool glass top range. This was not a cheap model, but I wanted it as the starting point of my new kitchen. After only about a year, we noticed that the area surrounding the operation controls was turning a funny color. On closer inspection, we noticed what appeared to be something peeling off, it was paint! The area surrounding the controls, which appeared to be brushed metal, was actually painted plastic! I was furious that an appliance at this cost level was made of plastic....really, a stove top made of painted plastic? I complained and after a huge fuss they agreed to come out and replace it ONCE. Well its been just over a year since they replaced it, and guess what? It is peeling off again!I dont know what to do, as Whirlpool obviously has gone the cheap end and doesnt want to fix problems. As others have mentioned, they say that it is JUST cosmetic, and they wont cover it under warranty...now my first new appliance for my first new kitchen since 1972 looks like crap! I should have kept my old avocado green appliances - they lasted over 40 years, still worked, and still looked good (except they were green). I wont ever buy another Whirlpool appliance. For those who mentioned that their appliance would turn on unexpectedly, please check recalls....this is one of the major problems on recall. Buyer beware!!!!

I purchased the Whirlpool Cabrio about five years ago. Last year, the motherboard had to be replaced. This year, it started load balance issues on the spin cycle; in other words, it wont spin without sounding like its going to tear itself apart. It cost $100 to have someone look at it, and was going to cost almost $400 to repair, and whats next? I spent a lot of money for this machine, and Whirlpools answer was to offer me a discount to purchase a new Whirlpool. Do I have Stupid tattooed on my forehead? I will never buy a Whirlpool again!!!

Every one of the knobs cracked where they engage the gas valve. One gas valve came loose from the manifold creating a gas leak discovered by the propane company on a system leak test. Screws came loose that hold the tracks to the base for the slide out bottom drawer. The AquaLift cleaning system is useless. Better buy some oven cleaner and rubber gloves. Very disappointed! One star because 0 isn’t an option.

I have a Whirlpool double oven. When I attempted to use the self-clean feature according to manufacture instruction, the bottom oven stopped cleaning in the middle of the cycle. I had a repairman out and he replaced the thermal fuse in the back of the oven. It cost $85. I didnt attempt to clean it again for another few months since I dont use the bottom oven often. When I did attempt to use the self-clean feature according to manufacture instruction, the same thing happened. I called the repairman and he said that the thermal fuse would blow every time I tried to clean the oven, because of the way the oven was manufactured. I contacted Whirlpool and they were not at all helpful. I intend to contact them again.

I have had this Whirpool Cabrio washer now for one year. Clothes always come out wrinkled (even after drying). It leaves clothes unclean and leaves white streaks in clothes. Water level is so low in, that it cannot rinse or wash clothes properly. After washing towels, when removed to put in the dryer, soap is left in towels. I have had a repairman here, he says the design is bad, yet reports works as designed. Dont buy this washer. This is a piece of junk!

I had purchased a washing machine trough CSD canteen and go for AMC for five years on September 25, 2006. In September 2010, I lodged a complaint and the Engineer visited and asked for a replacement of the bottom cover. I said okay, but later on he told me that I have to replace the complete outer cover. I agreed and asked them to replace it. The cost is fixed for 2,500Rs. They replaced the cover but did not replace the bottom cover.I talked to the agency and they agreed to hold to 1,000Rs for the bottom cover and I paid to them 1,500Rs. Later they brought an old cover and I refused to replace that. They told that the bottom cover is not available. Then they never tried to replace the bottom cover. I arranged for the same from the local marketing for 600Rs and replaced it. I paid the service charge for the engineer.Later, I lodged a complaint that the machine was not drying the cloth. The engineer visited and told me that the belt will be replaced on payment. I agreed and he told me that I will visit the next day and replaced the belt. But he did not come until it was late.On September 18, 2011, with number DL0911018283, my machine was not switching on and I lodged a complaint to customer care. But no engineer visited me. Then I regularly complained but there was no response from the agency. On September 23, I talked to customer care, Mr. **, that I am going out of station and I lodged a complaint from the last five days that no engineer visited me. My AMC is expiring on September 25, 2011. I will come back on October and then send the engineer. On October 9, I reminded them that they refresh my complaint with number DL1011007031. The engineer visited and told me that the PCB of the machine is faulty and I have to pay 3,500Rs.I told him that I complained for this problem during the AMC period, hence they are supposed to repair my machine free of cost but he refused. I talked to customer care and tried to resolve the issue but I was not successful. Then I talked to Mr. **, the head of Customer care in Delhi, on October 12. He promised to resolve the issue but no engineer visited me and my machine is still defective. On October 13, I tried to contact Mr. ** several times but he or his PA is not picking up the phone. Now, how will I get to repair my machine?

Dont buy this washing machine. All of my clothes are dingy and gray. I paid $1,751.96 for this set. What a big waste of money. Sometimes the clothes come out with dry spots and then some come out with lint like they have gone through the dryer and yet they are coming out of the wash. Often they are in a very tight large ball in the center of the machine. I distribute evenly around the machine and I dont overload. The brilliant engineer that decided the machine did not need a soak cycle is a person that has never washed clothes. Wish I would have taken pictures of some of the soil still left on my clothes.

I purchased a Whirlpool Refrigerator from Lowes. 21 months later I need to replace the compressor. Whirlpool has been kind enough to cover parts and labor, but it has been 24 days and no service call yet. After multiple calls to their service department, who keep telling me there is not another dealer in my area, I am forced to wait. Living out of coolers for the past 21 days is very frustrating. I wanted to rent a fridge and send them the bill, but they would not cover that. I will never purchase another Whirlpool product in my life and will advise family and friends on the reliability and service I have received.

Whirlpool Gold Series - I bought this dishwasher less than 2.5 years ago. The thing already broke. The motor needs to be replaced at a cost of about $250. The thing never did a good job anyway and often had to run it more than once to get dishes clean. I paid about $650 for the machine so I guess its just a throw-away appliance. Whirlpool makes complete junk. I will buy a different brand that is known to have long-lasting dishwashers. I guess you get what you pay for.

We bought our new Cabrio (washer and dryer) in the fall. Within 2 weeks, I realized what a piece of crap these machines are. They simply do not clean the clothes. I have complained to the store where we purchased them, and I was told there is nothing they could do as the machines are performing as designed? Im waiting for a class action suit to join to get rid of this junk. Curt

I purchased a Whirlpool gas top range from Lowes in Somerset Ky September 2013. Model number WFG524SLAB1. The surface is showing bubbles. I contacted Whirlpool and they gave some kind of story. In other words I am stuck with it. Still under warranty but they wont send someone out to look at it. Lowes told us that it could be a paint defect when it was made. If the top starts peeling, it will be a real mess. I have never used anything abrasive on the stove top. As of right now I am not happy with Whirlpool at all and if they dont do something about this, I will never buy another one of their appliances.

Two Whirlpool washers in six years that the barren in back of tub goes out. When the first one went out in the same month the warranty expired, I was told by a repair man that it was not worth repairing because of the cost. I purchased a brand new Whirlpool and only months later, the same parts are broken on this new front loader. How cheap is the Whirlpool app. made? Whirlpool wants to only send me a tech. to fix washer instead of replacing unit altogether. After all, the unit is only a few months old. I cannot believe I have to deal with this again.

The washer can not spin dry, as the unit will not balance. When it spins, it will get out of balance, and shuts off. I have had a repairman out, but he said he can not fix it, and that this is common with your units, He suggested we get a new one, but not from Whirlpool.

I bought 40 gallon gas water heater in June 2004 and had to have it worked on twice, costing more than I paid for it. I am replacing it now because pilot light will not stay on, and it is currently out of warranty, and I have no faith that simple repair will hold more than 1 year stint. Customer service was attentive but product itself failed to meet expectations.

0 stars. The refrigerator coil keeps freezing. There seems to be no defrosting, there is no element to do this so it freezes every 5-6 months. No warranty. I bought it as is but seems to me a function it should have isn’t working. They should fix them. Ill guess it’s just business, hope theyre ok with St. Peter’s showing them the way down to hell while he’s saying it was just business.

I feel as though they could use some additional features, it’s also hard to change out some of the wiring in the back. I’ve had some issues with smells coming from the washers as well from them. Hopefully they can start to look into tweaking smaller details to improve the overall machine.