I love my ceramic top. My only complaint is I wish my knobs were on the front of the stove because I am short. It would be nice to not have to reach over hot burners just to turn the temp up or down.

I had the bearing go bad in the tub after a few years of service. It cost hundreds of dollars. As an engineer, I look at this and it is a design made to fail. The seal design is inferior compared to old washers that had a shaft seal made to be on a spinning shaft. This is a rubber lip seal that is going to wear because it is using washer as a very bad lubricant! When the seal goes bad, and it will, the water runs down to the bearings and destroys them, and you have the replace the whole tub as a $300 part!

I liked Whirlpool brand. I was excited about the convection option and the warming burner. Plus it was on sale. I really like the AquaLift self-cleaning option but guess what? It does not work well. It is very frustrating!!! I would not recommend buying a Whirlpool oven/range. Low quality construction, features that work poorly, and poor online reviews. Another deal breaker would be poor customer service and repair service. Over, the Whirlpool oven/range is fair. The electric glass top does a good job cooking but keeping the glass top clean is nearly impossible. The oven does a good job baking BUT, the AquaLift self-cleaning does not work. I would recommend that consumers pass on the Whirlpool.

Whirlpool Hot Water Tank Thermocouple - This is the third thermocouple we have had to replace on this hot water tank in the last six years. Granted the part isnt that expensive, but the service call and replacement have cost us dearly. This is faulty tank and Whirlpool needs to recall this tank and replace them with new tanks. The price of this original tank and replacing this thermocouple three times has cost us over $800.00 total. I am not sure angry is the right word to describe our dissatisfaction with Whirlpool.

I purchased a new Whirlpool Cabrio washer 3 years ago. It is the worst washer I have ever owned. During the first year it had to be repaired. It continuously flashes F51 when I try to wash a load of towels or bedding. I am beyond fed up with this machine and will NEVER purchase another Whirlpool product. If you are considering purchasing one of these I would tell you not to waste your money.

Purchased new Whirlpool 2-door, side by side refrigerator from Standards store in December 2010 for close to TT$10,000. For 2-3 years, it made a very loud noise. Each time it cut off that disturbed my peace and quiet. I complained, to no avail. In early 2015 or thereabouts I began experiencing severe warming problems in the non-freezer compartment and, since that time, I have suffered large losses from spoilage. The warming coincides with over-freezing (icicles, thick frost formation and whirling, dense cold air) in the freezer compartment and icing up of the vents in the non-freezer section. Moreover, the cool air flows from the top vent only when the freezer door is left open. Since that time Ive only been able to marginally cool the non-freezer section by unplugging for up to an entire day, at least once per week. I believe this is a manufacturing flaw rendering the non-freezer section not fit for its purpose although it manifested itself sometime after purchase. My prior experience with another brand has been totally different (13 years and still working). It is totally frustrating. It is also unsafe since spoilage is sometimes difficult to detect. Here, we have to deal with the seller and that is often a hopeless situation, particularly outside of the warranty, as has been my experience with another household appliance. Ive been advised by independent technicians who reportedly have encountered this problem that the solution lies in boring a hole connecting the two compartments which then enables efficient cooling of the non-freezer compartment. Quite frankly, I would like to have the refrigerator replaced despite the fact that it is outside of the warranty.

Within 5 months my 850$ dishwasher broke. 2 months to repair and 15 plus hours on the phone. Warranty is cryptic. You must allow them 30 business days from when they order parts. Buy Bosch, wish I did!

Our new fridge, which was already an exchange from another unit that went bad, kept freezing things in fridge compartment. A tech was sent out three times and then the compartment quit working completely. They stated they would replace for us, only way they would replace was to have them ship a new unit which would take two weeks. So we are without a refrigerator for two weeks. Asked if I could go buy one and be reimbursed. I could but I would NOT be reimbursed for full amount. The company reps I spoke to could have cared less about our situation especially Fred who supposedly is a supervisor. Do yourself a favor...DON’T buy Whirlpool. Their customer service sucks!!!

I bought a Whirlpool refrigerator (model number model ised5lvaxwq00) about 14 months ago. The icemaker would not work when delivered. I had it fixed. Several months later, it quit working. It cost $200.00 to have it repaired. The ice door stopped working. I called Alabama Power to repair the icemaker. He advised that it would cost around $300.00 to repair. We are on a fixed income and cannot afford to have it repaired. On investigation, I found hundreds of complaints about the same issue with the icemaker flap. I would appreciate you trying to eliminate this problem.

Whirlpool makes a quality product. My gas range is 25 years old and it still performs like new. I’ve never had to have it repaired and it is used daily. If and when the time comes that I need or want to replace it, I will not consider any other brand.

Washer, barely 6 months old, purchased at Lowes. While my washer cleans and I am happy with it, my washer started making loud noises during the spin cycle. I called Lowes warranty service approx 9/26/13; tech scheduled for 10/8, over a week later. Diagnosis: stripped bearings; total bearings and all tub components must be replaced. Parts ordered to be delivered to my door. Cost of washer: approx $800. Cost of parts: over $1600. Washer cannot be replaced until they have attempted to fix it at least 3 times. Repairman returns on 10/18 to repair. Oops, large plastic tub component shipped broken from manufacturer. Reorder parts for repair on 10/29. Finally a repair BUT A&E left the large tub part saying they had no room to take the part. So now Lowes is trying to arrange to dispose of the huge part sitting in my home. I live in a condo so the part cannot be disposed of in our facility. This has been a nightmare to fix and while customer service was cordial, they were totally unable to provide what is considered excellent customer service. So whose fault is it? I have missed several hours of work to try to get this taken care of. I spent money visiting a laundromat for over a month. I am the customer and guess what that means? Nothing! Now my concern is getting that large part out of my home and whether to buy an extended warranty OR just throw it out if it breaks. Very dissatisfied customer! And no the warranty for this major part overhaul is not a year from installation..... my warranty still starts the day of purchase. Are you serious? My advice: ask your friends about their appliances & esp service if they received it.

We purchased a Whirlpool Duet front load washing machine Model #WFW9550WL in July 2009. In July 2016, the guide on the door hinge broke, making the machine unusable. When performing a national search for the part number (#8183202) to replace the broken hinge, I found that there were none available anywhere in the United States. When talking to Whirlpool, they indicated that during 2015, they only sold 142 of this part, and were currently looking for a new manufacturer for the part. They further indicated that the part would not be available until late September or early October of this year.

I have been buying Whirlpool appliances most of my married life. Our most recent washing purchase is the worst machine I ever owned. I have ruined more clothes, rugs, sheets and towels, etc. than I ever have in my 45 years of doing my own laundry. In fact, I do not EVER remember a washing machine destroying any of my articles. I just pulled 2 almost new rugs out of the washer only to find they have been destroyed! I am pretty sure it is the extremely fast spin cycle that is destroying my items. I know it cant be the agitator because it doesnt move fast enough to even clean the clothes. And the stupid load sensor is absolutely worthless! It does not dispense enough water to even cover the clothes let alone clean them. Go back to the old machines that did their job without destroying anything and actually cleaned the clothes with an amount of water that I chose. I ABSOLUTELY HATE this machine.

I bought a dishwasher Gold Series Top Control Whirlpool dishwasher at the Home Depot, April 4, 2015. Paid six hundred ten dollars and twenty-eight cents $610. 28. I noticed soon after that the top shelf falls off the rack when loading at front. I began loading from the back. It worked for a while but now it totally fall apart. The door will not close and I am unable to use the machine.

I saw on the Today Show that my Whirlpool Duet washer, purchased in 2008 was a mold-producing nightmare. We are now part of a class action lawsuit that seeks redress. When I called Whirlpool Customer Service, I was fed the company line that the problem is that we dont clean the machine regularly. The instructions call for monthly maintenance, but the rep said we need to wipe it dry after each use. This is an original defect in the machine that Whirlpool refuses to own up to. We had been Whirlpool devotees for years but will never purchase another Whirlpool product.

I purchased this dishwasher (whirlpool WDF330PAHW2) in February 2019. Really worked great until May 2020. Now doesnt drain on the last cycle, smells bad (even though cleaned) and door leaks under handle on front. Really too bad. I have been a Whirlpool champion for 25 years. Now not so much.

We bought our house in December 2010 and the water heater (fg1f4034t3NOV) just started to give me fits. I had the same pilot light problems everyone else encountered. The person at the 877-251-1679 number gave me a good tip and that may have fixed the problem in the short-term. They told me theres a screen for venting on the bottom of the unit and to use a bottle brush after turning off the unit to clean the screen. I did this yesterday and the pilot light has stayed lit. I called the toll-free number and was told the water heater was out of warranty, but they could send me the part to fix the heater at half-price. I ordered it and they waived ground shipping. I hope to have the situation fixed soon. I’m very pleased with the level of service.

Whirlpool realized in 2002 that this was a defective part. In 2005, they recalled the product. I purchased the Hot Water Heater (Model # BFG1F4034T3NOV) in 2006. Being this product was recalled in 2005, why was it still being sold at Lowes and other stores? Why wasnt it pulled from the shelves? Why werent the parts replaced before being sold? The hot water heater stopped producing hot water. I contacted Whirlpool and they said the gas control valve had to be replaced; they gave me a part # and an authorization # and told me I could pick it up at Lowes. I asked about installation, because it is still under warranty. They said they dont service this. I picked up the part and tried to find a plumber to do the work and they said it was too small a job. I had to impose on friends to help me; one is a volunteer fireman. He came out and put on the new part and in doing so, another piece broke. We called Whirlpool and they said they had to replace the manifold door assembly. They overnighted the part. Again, I asked about them servicing this hot water heater and I told them I am a single parent and cant do this work. They said they dont service this item. I then had a handyman come out to try to fix it and he wasnt able to get it to work and now I smelled gas (it cost me $198). I had to call the gas company and they came and said there was a leak and turned it off and gave me a violation. I called the company I have an HVAC contract with and they added the hot water heater to that contract and it cost me $120 more for a year. They finally got it working, I was without hot water for a week. I do not recommend anyone buy products from this company. They are horrible to do business with and their service is awful (the service they dont offer).

After having an expensive front loader (ugh) we purchased the Whirlpool Cabrio top loader (wow)! Best washer ever owned, wouldn’t trade it for any on the market! It has been as great and problem free as the front loader was terrible with cleaning and smell.

HE washer does not clean well. I followed all instructions for detergents, settings, etc and it has not improved. Leaves white marks on dark clothing. Does not use enough water. Contacted Whirlpool and they were not helpful. I would not buy this product again!

I recently purchased a new Whirlpool propane water heater. Dependable name, dependable product, years of trusted service, right?! We have bought many Whirlpool products over the years but never again. Got it home and installed it. It sounded like a plane taking off, and that was in the garage. Next came the lack of hot water. Mind you, we replaced a 40-gallon tank with a 40-gallon tank and the last one we had lasted 18 years without a problem.Well, same showers as usual, and we were turning up the heat mid-shower and again and again during the shower. Even turning up the heat on the water heater didnt relieve the problem. We are not happy with the product. And, no, there is nothing mechanically wrong with it; its just sub-par. Our water heater from 18 years ago worked more efficiently than this newer model. We called customer service, and we were told that unless there was something mechanically wrong with it, such as a defect, there was nothing we could do. There’s simply no recourse.Shame on Whirlpool for not making a quality product and standing behind it. This was a very expensive purchase - over $500.00. We thought we were buying a quality appliance. Very disappointed, and I will be returning it. I’m never buying another Whirlpool product again. I can only hope that the company we bought it from has a better customer service policy. Very frustrated and disappointed.

On March 3, I purchased a dishwasher (Model: KUDE70FXSS1 Serial No.: F10202361) on Whirlpools VIP link, which will more likely be my last Whirlpool purchase based on the slightly damaged product and incredibly poor customer service Ive received. Upon delivery of the dishwasher on March 9, I noticed that the left rear wheel was damaged and slightly bent. I also noticed that the unit was a little off balance. But the delivery person explained to me that everything was okay and that the front legs just needed to be adjusted. I believed him and signed the delivery receipts with the additional note about the left rear wheel being damaged. At the time of delivery, the driver also happened to mention that J.B. Hunt did offer installation services for dishwashers. I then called Whirlpool customer service, which pretty much gave me the cold shoulder, and said that it wasnt in their policy. I had to request the installation service at the time of purchase and Whirlpool would not send someone back out. This made me upset because I initially wanted to have the dishwasher installed but your VIP link didnt show an option for installation. Im not sure how Im supposed to request the installation services when theyre not being offered. But the genius customer service representative thought that I should intuitively call Whirlpool when the link isnt on the website. This is the first demonstration of Whirlpools poor customer service, in my opinion. After a couple of days of driving around to get a hose and a cord to perform the installation, I finally installed the dishwasher on March 12. Once installed, I noticed that the hinge on the left side was rubbing against the tub of the dishwasher. The door hinge was bent and the main tub was slightly damaged. Again, I contacted Whirlpools customer service department who sent out a repairman who confirmed that the dishwasher needed new tub and hinges which were covered under warranty. Unfortunately, he told me that I would not receive a new dishwasher since I installed it myself. He would order a new tub and hinges and transfer all the equipment and wiring from my original dishwasher to the new tub. Essentially, I would have a refurbished dishwasher at a new price, which I do not want.I initially wanted to have the dishwasher installed but your VIP link didnt show an option for installation. If Whirlpools website worked the way it should have and offered an installation service, I wouldnt be in this situation. I would have paid for the installation and the people installing the new dishwasher would have realized that it was damaged prior to them leaving and ordering a new dishwasher. I am a customer and not a dishwasher repairman. No normal person would have been able to catch the damage that is on my machine. Second, I find it hard to believe that Whirlpools policy states to have all the equipment from my original dishwasher installed on a new tub. So, I paid $989 for a new dishwasher thats really a refurbished dishwasher because of the damage. I wish I would have visited this site prior to purchasing. I will never deal with Whirlpool again.

I bought a new home from Pulte recently. All of the kitchen appliances were Whirlpool which came with a 1 year warranty. I have had problems with 2 out of the three that were installed. The oven had a faulty control panel. I am still waiting for the replacement from Whirlpool which I am told could be months getting there. The dishwasher they installed, FX1700017, leaks water from the vent at the top of the door. When you open the door after running a load, there is a puddle under the vent from water that is trapped in the vent. The service company that they sent out said it is a design flaw and there is no fix for it.Whirlpool just keeps saying since there arent any error codes coming up, there isnt a problem with the way the dishwasher is functioning. I was told I could pay for another opinion, but they wouldnt guarantee to reimburse me if they couldnt prove the dishwasher wasnt functioning properly. I guess they dont consider someone slipping and falling because they didnt see the puddle before it got cleaned up a problem. I have given up trying to get anywhere with Whirlpool. I will take my $150.00 for a second opinion and the $200.00 that they want for an extended warranty and put it toward a dishwasher that doesnt leak! Beware!!

My husband and I bought a brand new front load washer and dryer set in 2011. We have had nothing but issues since the day they were delivered. First off the dryer, needed to be repaired after one load of laundry just went through. We were told that the thermostat went bad... needless to say we have replaced that one thing 4 times since we purchased them. Secondly the washer, this makes me so mad. I have 3 children, 2 of them have allergies and Asthma. I clean my washer regularly with vinegar and a special front loader liquid. I have mold in the areas where I put the liquids in. I have to take them apart every week to make sure they are clean. I leave the drawer open to air dry when Im finished with laundry for the day. I leave the door open and I still get mold everywhere. I do laundry on a daily basis, this should not be happening. Im so disappointed with this brand and I will never buy them again!

This is our second Cabrio w10550273a. The first one was just as bad as this one. It was replaced under an extended warranty we bought. This washer just like the last one constantly gives a UL code. Thought the washer and load are level.

Immediately after purchasing an entire kitchen of Gold Series kitchen appliances including the refrigerator with bottom freezer in 2/2013 from Lowes we began having issues with the refrigerator. I am not an engineer and dont profess to be, but even I can figure out that the whole thing is a problem based on a design issue. The top drips water consistently and has from the first, which has been addressed numerous times. Ice maker replaced trying to fix the situation two times. The freezer guides were messed up and off from the beginning, and had to be ordered-waited for, then installed. In total a repair person has been here, an inconvenience on our part - 7 or 8 times and we still dont have a refrigerator that works properly!The last time we had someone look at it, there was a part that had to be ordered from, yes, Mexico and we had to wait a week or so and they told us they could rent us a loaner!!! Are you kidding me?? I should have kept the old 26 yr old fridge in my garage that is still working that was built in America! After buying $8000 in appliances and supposedly a top of the line brand name that in the past has shown integrity to their products... I pay my bill each month, because if I didnt someone would put it on my credit. But who puts it on Whirlpools credit? Who is going to hold them accountable and how many complaints must there be in order for someone in the government to step up and do something to a company that is taking tax dollars from our US and sending it to other countries but selling less quality products to those who do pay the taxes? I am ready to sign a petition! I should have gone with the other brand! Any other brand would have given me a better shot than this of having less of an issue! Terrible experience and certainly NOT GOLD! Shame on YOU Whirlpool!

I bought this Cabrio Washing Machine just over a year ago and it never drained water when I was doing towels and bed sheets. Life got in the way, and I managed to run smaller loads in the regular settings. Now, the machine is just over a year old and it will not spin unless I put it on the rinse and spin issue. It takes well over 2 hours to wash a load of laundry. From looking at other reviews, this is a big problem. I would not recommend this washer to anyone. It cost a ton of money and was the worst washing machine I have ever used.

We have already filed a complaint but could not get any satisfactory reply. Our washing machine is not working properly & we are very angry with your service. It has created a lot of problem to us. Kindly do something regarding this.

A few weeks after we bought it, the washer was already having issues spinning out, and the clothes would have to go through another rinse and spin cycle. A bout a year and a half in and I had to replace the pump because it stopped draining. Even carefully loading the machine, and at least two or three times a week it would not spin out. Two weeks ago it stopped agitating actually performing washing action and spinning out all together. Last night I replaced the actuator which controls the speed or lack thereof in the spin. Still nothing. Ive reset it multiple times, still nothing. At least the clothes are getting wet. At tax return time I am replacing this piece if garbage and I will never get another whirlpool, or Maytag washer again because from what I have been told by dealers and repair men; they are all garbage.

I have posted on here in the past about the problems with the Cabrio Washer from Whirlpool. Our third top load lid was just ordered since 2011. There is a design flaw where the plastic frame around the lid cracks and causes the lid to hump up. While shopping at a local appliance store recently, I saw a new Cabrio washer and the lid and hinge system has be re-designed. I wonder why?????

Bought this Whirlpool washer (WTW5000DW0) to save energy and water consumption. It has been awful from day 1. Clothes come out with detergent (white marks) all over them. Clothes aren’t spun out enough to dry them. It takes FOREVER for a load to finish, I can’t imagine that this is saving me anything on electric. Waste of money. Do not buy this!

This ref model # wrf736Sdam13 is less than 6 months old. The doors have never lined up. At the top is a 3/4 gap and it is 1/4 at the bottom. This is a side by side. Sometimes the left door will open on its own. If you stand to the side and look across the front, the left door sets out about 1/2. My wife and I have contacted whirlpool many times and they will not do anything. I am ready to get another ref and get what I can for this piece of JUNK. We built a new home and purchased all whirlpool appliances and do not like any of them. Will never buy whirlpool again. Very dissatisfied with all – RANGE, DISHWASHER AND THE VENT HOOD. PS, the vent hood sounds like it is crushing ice when you cut it on. Very, very DISSATISFIED with all of them.

I have always liked Whirlpool products but it seems lately they are lagging in this department. My washer/dryer combo each separate I dont feel are doing the job they should be. Washer is the bigger problem. Softner dispenser not distributing the softner correctly and now I have to clean out after each use. These are about 10 years old now. Is not spinning all the water out and not at all sure if clothes are getting clean. Most of their products usually lasted much longer back a few years.

7 months ago we had a Whirlpool dishwasher installed into our home. While away on vacation the piece inside malfunctioned and caused major damage as water filled the home. Whirlpool claims, that because it’s a part that they contract out to another company, they “Whirlpool” are not responsible! If you purchase a product from Whirlpool and they put their name on that product, then Whirlpool should stand by its product. Well... beware, you’re not going to compensate from Whirlpool! We urge you, make sure of whom the parts of the product your buying from belong to, before you buy it FIRST! Never again!

Our side by side refrigerator is 2 1/2 years old. The LED lights are not working. Had to call repair service because one cant get into the housing without a service tech No9 normal screw in light bulb to replace 2 burned out light bulbs AND pay for the service call is $475.00. THIS IS HIGHWAY ROBBERY. I would expect to pay for a major repair BUT A LIGHT BULB. DO NOT BUY A WHIRLPOOL REFRIGERATOR WITH LED lights. This is a major flaw in their manufacturing and If they go out again the fridge will go to the landfill.

April 1, 2018 we purchased a new Whirlpool 36in. W25 cu. ft. French Door Refrigerator, model # WRF555SDHV, Serial #**. On 2/15/2019 the ice maker quit working. Kirbys Appliance in Prineville, OR ordered a new ice maker and installed it (it was still on warranty). On 5/8/2020 the ice maker quit working again...I called Whirlpool Customer eXperience Center, 1-800-253-1301. Had I purchased an extended warranty, it would have expired 3/31/2020. No one will come and fix or replace the ice maker at my expense, because of COVID-19. So, we purchased our $1,999.02 Whirlpool that does not make ice!! I will never buy another Whirlpool Appliance again.

Purchased Whirlpool set from Lowes March 2016. Washing machine is not worth the metal its made from. Clothes are dirtier after the wash. All white linens are ruined! Clothes wont rinse or spin dry. Whirlpool wont reply nor will contracted repair return. The last repairman told us we would be better off taking the clothes out back and wash with hose because the Cabrio is useless and nothing can be done to fix it. I contacted place of purchase (Lowes). They wont help due to not buying warranty thru them. Stuck with the worse washer ever... never again Whirlpool.

We bought an 80 gallon lifetime warranty electric water heater. We get about 20 minutes of hot water and then cold water. Weve had 2 plumbers out and checked our system and said it has to be the water heater, but they dont want to mess with it in case it voids the warranty. Fine. We called Whirlpool and since the alarm system isnt indicating an issue, they say its not the water heater. We now have to do a diagnostic ourselves to find out if it is the water heater. What? It has a warranty! We are not plumbers! How come Whirlpool doesnt think its their equipment? Weve already had ours checked and it isnt us! So frustrating and we will not buy another whirlpool product again! Not good customer service to promote repeat buyers. Whirlpool, shame on you.

I bought a counter-depth French door refrigerator for our new build. I had to wait 6 months for delivery since it was on backorder. When it arrived a door was bent. Lowes replaced it with a door that had a leaky ice maker. Ice and puddles of water intermittently appear on our new wood floor. Whirlpools technician told us WE would be charged if they couldnt find the problem. Whirlpool rep confirmed. Also the manufacturer warranty began at purchase date instead of delivery date.

Have used washer since 2005. Still runs today. Minor repairs done. Is reliable brand. Whirlpool gold model washer purchased at navy exchange. Will buy another whirlpool again. Have bought other brands which lasted 7yrs and then needed replacing. This whirlpool is the best. Lasted 15 yrs and still working fine doing 5 loads a week.

Two-year old Whirlpool Cabrio top load washer; absolute piece of junk! Bearing on the drum howls like a train. Now the master board or some other sensor (under drum) is out. Serviced for the third time and the service repairman states its cheaper to replace than to repair. For a 2 person household, it is reasonable for us to expect more than 2 years from a washing machine. Same experience with Whirlpool 15 years ago. 1st time shame on you; second time shame on me.

I bought this dishwasher in Nov. 2018 to replace one that was barely working. I have enjoyed using it much more than my old one. Its very quiet and does a great job of cleaning dishes, pans and silverware. The only problem we had was installing it. The leveling screws do not hold their height adjustment when the dishwasher is pushed across the floor during installation because the leveling screw pad was changed from steel to plastic and the tapped hole for the leveling screw is too loose. The effect of this - whereas the steel pad would slide the plastic pad will grab, turn and move the leveling screw out of adjustment. Especially if its tapped hole is too loose. So we went to Home Depot and bought 4 5/16 nuts and used them as lock nuts on the 4 leveling screws. This cost 50 cents. Once we installed it everything worked perfectly. It does take longer to complete a cycle than my old one - 3 hours vs. 2 but it uses less water and does a great job of cleaning. You must use a drying agent with your dish soap or it wont get dry enough. Also, if you use the short 1 hour wash it wont have as much time to dry and some dishes wont be completely dry. I usually wait to do a full wash with the normal cycle - 3 hour.

Whirlpool Calibri washing machine - I have the washer for 4 years and have replaced four computer boards to the tune of nearly $300 each. When Whirlpool was told of my experience, they said they were sorry. Obviously, I am too and will not buy again. You would think they would give me one board at no cost, but I guess words are cheap.

I dont recommend this product to anyone. When you try to clean the washer it leaks out the bottom. After 2 years of use it now beeps 9 - 10 times and I have to reset it after each beep to get it to run. Then in the middle of the rinse cycle it does the same thing all over again. What a piece of junk. Plus it does not rinse well at all. Leaves a white residue on my blankets. NOT recommended at all.

I installed this Whirlpool Gold Series oven in December just before Christmas. I cooked a 9lbs Turkey for over 4hrs at 350 degrees (it should have only taken 21/2 hrs at 325) used a thermometer to test the temp. Well the breast part was fine but later in the evening I removed the entire turkey only to find that the legs, thighs and bottom of the turkey was still RAW. Lucky no one had asked for that part of the turkey. Next I tried a small prime rib roast. Same thing happened. The top of the roast was fine and the bottom was RAW. I dont dare cook anything in the oven now. Called whirlpool and they are going to send someone to look at it but I wont hold my breath for any results. After reading the same complaint on several reviews and the TV show Marketplace it seems to be pretty standard for this product.

I would give no stars for this piece of junk, Whirlpools energy efficient top load washer. I called 1 day after their warranty was up. It was actually purchased on Oct. 9th, 2010. The machine was leaving spots on my clothes from day one (was told it was my detergent)! The machine started making strange noises and not cleaning clothes. It was coming out worse than they went in the machine! I called on Oct. 10th, 2011 to complain. They told me my warranty was up! I had to pay $234.83 to order F7E1 activator and pay repair. The repairman told me that my machine was not delivered until Oct. 14th, 2010. It should have been covered on warranty!

Am posting in regards to a brand new dishwasher that I purchased the first part of February 2020 from Menards. The dishwasher I bought is Model # WDT730PAHB and Serial # F94519386. I had the dishwasher 10 days and it stopped working after running only two times. I checked the breaker box and all electrical connections to the machine and it was getting electricity, but would not turn on at all. I called the store to return it and they only have a 7 day return policy. Since then Whirlpool has been contacted and I have had two service calls from Whirlpool. The mother board has been replaced (which I waited two weeks for the part & five hours for a service man) and still it will not come on. Now I am waiting on a wire harness, ordered on March 4th or 5th and still not here. I completely understand wanting to fix a broken machine, however this was a new dishwasher that only worked for 2 washes. I have now been without a dishwasher for almost 2 months, which in light if our current world situation isnt a huge deal, however this is a time when sanitation is very important. I feel like Whirlpool should offer to replace my new machine with a new machine and not something that is refurbished. At this point it is costing more to repair this machine than to just replace it. Every time I call Whirlpool I get the line of we have to repair it. Give me a break. Take care of your customers!!?? #neverbuyawhirpoolproduct

Since purchasing original refrigerator 2 years ago I have multiple problems. Freezer was icing up to the point where drawers could not be opened, after numerous service calls, door was replaced which did not resolve problem. Refrigerator was replaced on warranty. Soon after light control circuit board had to be replaced. Next light control had to be recalibrated. Now, with the unit being approx. 1 yr old, rust spots are appearing on freezer door. Whirlpool rep advised this problem is not covered on warranty and would not provide any information as to what company contacts could be used to pursue the issue. Very upset and disappointed with product and customer service.

I have owned two different Whirpool washers over the last several years, and they have both been a very big disappointment. More than that they have cost me money, time, and peace of mind. The Duet was my first experience with a Whirlpool appliance. It was a front load that I replaced the water pump on twice and constantly had to take the front bottom piece of the washer off to clean the trap on. It had been taken off so much that the machine actually just fell apart. It also had some type of mold or mildew problem where it made the clothes smell. It was a constant headache.I was stupid and allowed a salesperson from HHGregg to talk me into purchasing the Whirlpool Cabrio washer. Another huge mistake. Again, cost me time, money and peace of mind. I have owned the washer for a COUPLE OF MONTHS, and the clothes that I have washed smell so bad that I cannot use the washer anymore. I tried to call customer service, but it is impossible to get any help because the lines were so backed up, I have not had the time to sit and wait for an available person. Not to mention there is an extensive process of pushing lots of buttons before you are put on hold to presumably talk to a human being. I assume this is because so many people are having so many problems with their Whirlpool appliances. It is not surprising. I bought a new washer, a GE. It is awesome!When I have the patience and the time, I will try to call Whirlpool again and see if they are willing to do anything about the washer that at this point is just sitting in my garage taking up space. I spent around $600 on a washer I only got a few months of use out of. When we moved it to the garage, we could hear water swishing around, which explains the horrible smell of the clothes. Once I started having the issue, I went online to see if this was an easy fix, and it turned out that LOTS of other people are having the exact problem, to the point where people are trying to get a class action suit going. Do yourself a favor and avoid the hassle of dealing with this company. If you purchase a Whirlpool washer, I guarantee you will be sorry. Trust me, I was stupid enough to do it twice. Hope this helps someone avoid the headache these appliances have given me.I will never buy Whirlpool again. And by the way, Maytag is made by as well as the following: Admiral (Canada), Chambers, Coovert (acs), Crosley (newer fridges, a/c, washers), Danby (8, Estate, Inglis, Ikea, Kenmore (see Sears), KitchenAid (4), Kirkland, Maytag Epic®, Roper, Speed Queen (Canada only), Sub Zero (undercounter ice makers), Whirlpool.

I bought Whirlpool hot water heater with the Honeywell part in 2014 and the thermal box went out. No flashing lights, no way to reset. I understand that Whirlpool had a class action lawsuit after researching. Still selling this product to consumers. Whirlpool should be held responsible, and be made to give an allotment to replace homeowners with hot water tank of choice! If lawsuit is active please add my name.

Dont buy. Purchased over the range microwave. Service order less than a week after install. Heats unevenly. Burns center of bacon consistently without fully cooking ends. Popcorn pops half the kernels yet Whirlpool says nothing wrong with product. Well within 1 year warranty but had to pay for service call cause Whirlpool determined microwave was operating as manufactured. Laughable! This company does not stand behind their product or their customers. Never again will I purchase a Whirlpool product.

I took the Sears salesmans suggestion and bought a high-end quiet dishwasher. It worked wonderfully until it sprung a major leak. Computer told me the phone # to call. It took a week for the Sears repairman to come out and $79 fee to just look at it. He said the fitting between the sump and the pump came off and flooded water over the electric motor. Electric motor is shot! Cost to repair is over $400 and a 3-week wait!!! When and if a new motor is installed, only then do we know if the computer is also fried. This was a high-end dishwasher. Factory warranty just ran out. Repairman said this is a common problem with this model. DO NOT BUY THIS MODEL.

Called Whirlpool customer care for help with identifying make and model number of a slide-in, ceramic cook-top range (one of their popular brands). The representative was cordial, patient and very helpful when it came to giving me directions on how to locate make/model information on the unit. That was until I let her know about a recent problem with the stove. The edge of the cooktop is much too sharp! My hand got cut while wiping down the stove top/adjacent counter. Although Ive had the stove for a while, Id never had that happen before; thats probably because I used a thin rag this time around to do the cleaning. I asked the rep if anyone else had reported getting cut by the stove top. She said, No. I let her know that my goal was to just them know about the situation, because such a sharp edge on a cooktop is a safety issue. She disagreed. But what could or should she have said? In all fairness, it came down to balancing loyalty to the company with genuine care for the customer.I do appreciate how kind she was in communicating with me, but am very displeased that once Id shared about the problem she seemed rather dismissive of the situation. How could the risk of being cut NOT be a product safety issue??? If you visit the Consumer Products Safety Commission website, you can see where risk of laceration is a reason some products are recalled. Based on that understanding, I would say that sharp edges on a ceramic cooktop IS a safety issue!

Whirlpool Gas Range WFG540H0es - Purchased 2 months ago. After 2 weeks there was a spill. The black burner caps are powder coated. After cooling we washed it with dish detergent & a sponge. The powder coating came off. Called the company. They replaced burner caps. Last week there was a spill and it stained the burner bases which are powder coated in a silver color. We tried 409 cleaner, Windex, dish detergent with a sponge. Could NOT get the stain out started removing powder coating. Called the company they ONLY guarantee cosmetic appearance 30 days. They wanted $139.00 for a new set of burner bases. I am going to go back to Lowes & see if we can return this Whirlpool range.

Reading the many reviews of malfunctioning washers and other appliances, I wonder why organizations like Consumer Affairs and Consumer Reports do NOT help the many cheated customers form a class action lawsuit or boycott or some other means to effectively organize and force manufacturers to return the full cost of purchase, taxes, shipping, moving and repairs for 5 years for every product. The manufacturer have NO consequences for selling shoddy, malfunctioning but terribly expensive products. We are all being taken for fools by the corporations.I was stupidly brand loyal and bought a Whirlpool Duet front-load washer and dryer because we had to leave our perfectly good 28-yr-old Whirlpool washer when we sold our house. The first set of instruction is to pull the electric cord from a small hole in the back of the washer. No amount of pulling would budge the cord. Finally yanked with all my strength, heard a snapping sound and 12 of cord came out. Then no more pulling, yanking or tugging would produce another inch of cord. So I took off the top of the machine and found the cord tightly wedged in the fork of a plastic thing that looked like part of a stabilizer for the drum.A similar plastic thing on the other side was broken at the fork, the snapping sound I heard. Freed the cord with lots of effort, but it was still firmly stuck way down inside. Removed the back of the machine, found the cord stuck inside a circular thing with one tiny opening. Took lots of time and effort to free the cord from that, but it was still stuck. Finally managed to reach the plug, which was firmly anchored to the bottom of the frame with an orange lanyard. Cut the lanyard with a knife to finally free the cord. This had to be an act of sabotage by an assembly worker, as no way could the cord accidentally jam itself into 3 different places too small for the cord to slip in, and it certainly didnt tie itself to the bottom of the frame with a lanyard.The hour it took to free the cord was just the start of troubles with this machine. It did start and kind of tumbled clothes in an odd fashion, but when it went into spin cycle, it literally jumped all around the room, almost jumping out the door. The whole house shook and I feared the floor would collapse. That machine must weigh well over 100 lbs. even without water and clothes. Next load I tried delicate cycle which had a slow spin cycle.Same result, even worse. I had to wedge my body in the 10 space between washer and dryer and press down with all my 170 lbs. to keep the machine from doing serious damage to the dryer, walls and floor. I contacted seller, Lowes, and they said call Whirlpool. So I did, but no response. Before buying that machine, I read many horrible reviews of Whirlpool Duet machines, but I have only owned 2 washers since 1967, both Whirlpools, so I had strong but stupid brand loyalty.

We recently purchased a new Whirlpool refrigerator and washer/dryer set from Home Depot. The truck for delivery was late and unable to pick up the refrigerator in time for scheduled delivery. Whirlpool contacted us to inform that it was now on back order for another week claiming there was nothing else they could do. Strike one. We paid for the installation and kit for the washer and dryer set. The tech who delivered them claimed the kit was not correct and that he could not install the dryer. We contacted Home Depot, Whirlpool, and had Home Depot call Whirlpool on our behalf with no resolution. They will not refund the installation even though they didn’t install anything.Whirlpool will not directly say whether or not they will send someone else out to actually install it this time. To top it off - I asked the Whirlpool rep which kit needs to be used and she told me whichever I want... for a gas hook up... whichever I want. This is ridiculous and Whirlpool has the worst customer service I have ever experienced. Side note - don’t waste time on the chat feature they provide. You will be directed back to the 800 number with 30 minute hold times. Horrible company!

Another person with problems called this a giant Whirlpool paperweight and he is so right! I received delivery of a Cabrio WTW7800XW3 washer on December 17, 2011. I had an issue (stopped in the middle of the cycle and flashed the letter “F” on the control panel) with it on January 2nd. I called and scheduled service. I had unplugged the machine and a few days later I replugged it and it started to work, so I cancelled the service call. In March, the problem started again. It just adds a little bit of water and then stops. Since then I have had repairmen out 6 times with 8 new parts installed and the washer still doesnt work. Now, the control panel won’t work. Whirlpool refuses to replace the machine. The repairman says these are the worst machines (any of the ones that are top load and have a clear top) he has ever seen and that I should buy an extended warranty. He says the bearings in the tub wear out among other things. On one of the repair visits, the serviceman found a chewed up pair of baby pajama pants. The machine makes a really loud noise like a jet engine taking off whenever it spins and the clothes are not clean. Whirlpool says that the warranty does not cover replacement of a defective machine. I have since researched the machine and have discovered that there have been problems with this line of machine for years. So, why are they still selling them? I am hoping for a class action suit. The company should stand by their products. I will never purchase a Whirlpool (or any other brand manufactured by Whirlpool) product again. I have had the machine for 4 months and it has been usable for about 2 of them.

I purchased the Cabrio washer about 2 years ago. This summer, I began to hear a roar in my washer when it was spinning. I called a repairman and in order to fix it, the tub has to be replaced and it will cost $258 plus service call. My sister purchased her Cabrio 3 years ago and her washer has the same problem. This sounds like a recall issue to me. I think Whirlpool needs to recall this washer or pay my bill.

We had purchased matching Whirlpool Cabrio HE washer and gas dryer. Both appliances were worthless. Same problems as everyone else. Clothes did not come clean. Had to put it on bulky items just to clean the clothes due to lack of water. Funny how all the older machines that actually put water into the machine cleaned clothes. Went through a motherboard (computer) for both the washer and dryer at $250 each. Washer had repairman out at least 12 times over 3 years. Never again would I purchase a Whirlpool. We went to our local appliance dealer and purchased a Speed Queen. These are like the older ones. THEY WORK! They use the correct amount of water and wash your clothes in half the time. 22 minutes per load! You can open the lid while the water is running in and load your clothes. Gee, what a concept. Only company still making them in Wisconsin, United States. Go Wisconsin! They back their product with a 20 year warranty. What?? Who does that anymore? Companies who stand behind their product. We love our new Speed Queen.

I have had 6 months of absolute HELL working with Whirlpool. I mistakenly purchased a Whirlpool Refrigerator from Home Depot and the moment I did Home Depot were hands off. Sadly my brand new refrigerator didnt work from the moment it arrived. The ice machine was dripping inside from the back making all the ice freeze together and created an ice sheet below the ice box that can be taken out. There also was water dripping out of the ice output. The water output wasnt working and the water was literally trickling out when you pushed for water.SO Whirlpool took 6 weeks to send their 1st technician from L.A.R Services out of Boston and the guy turned up and said it was due to needing a new ice tray/machine and our sink having an old filter. There was NO filter on the sink! And he then ordered an ice machine that arrived at their office in 4 weeks but they took 3 weeks to try to deliver it. When they finally came out they called to say they had to turn around because the road was blocked- there are 3 ways to get to our home....so I had to chase for 2 more weeks to get them to come back out. When they arrived they handed me the ice tray outside and drove off!!!SO WE TRIED AGAIN and this time had Home Depot call Whirlpool to get a service person in to fix it. We had to wait another 5 weeks and when he finally came he claimed our issue was due to the fridge not being perfectly level. Well, guess what, its now level and the ice is still freezing into giant blocks, some weird plastic strap is hanging inside the ice box and the water is still trickling out.Ive called the service guy 3 times and he is yet to call back and right now Im on hold with Whirlpool (its been 14 mins so far). NEVER AGAIN will I buy anything WHIRLPOOL and I will be sharing this experience in every consumer space possible so no one has to go through what we have. Our new fridge is still broken after 6 months!! All I want is my GE fridge again and I should have a followed the reviews.

Purchased 03/28/13. Refrigerator 62 degrees on July 4, 2013. Called for service July 5 - came out July 9 and told unrepairable - wiring harness set against tubing rusted and broke wires. Since July 9, I have been trying to get my replacement from Whirlpool and always told they will call me 24-48 hours - never calls. Asked for supervisor on July 22, then asked for her name and direct number. Supervisor said someone would call me about delivery. Supervisor told me if a local store would have had in stock, they would have sent it out from there (called local store and was told 6 were in stock and could be delivered tomorrow). Tried to call supervisor back to inform her, but number would not go through (apparently bogus number). As of July 22, 2013, still no refrigerator. Very poor customer service/service repair. July 24 - asked if I needed to get an attorney and/or contact local new consumer advocate - Whirlpool said they would issue a refund check for the refrigerator, and that I should receive it in 14-21 business days - said they could not refund on credit card I used to make original purchase. Hopefully, the check will arrive.

Purchased a new oven 06/2016- today, I had Sears come and look at the issue. Need a new Control Board/ $750.00. Called Whirlpool, they will not help, or give me an explanation of why this expense is justified. Very dissatisfied with product; will not recommend, nor purchase again.

I bought a pair of Whirlpool front loading washing machine and dryer on May 23, 2011. The Duet Steam washer model is WFW9640XW, dryer is WED9470WW. Their high retail price was $1125 each. I did not pay this for them. I thought I got a great buy at Lowes for the price I paid, plus their 4-year extended warranty. Whirlpool used to be a very high-end appliance manufacturing company. Now, all they put out the back door is junk. I would advise not to buy Whirlpool front end anything. My washing machine started making noise about 2 weeks before I reported it to both Lowes and Whirlpool. The noise sounded like bearing not being lubricated, which that is what it ended up being.The noise got so loud that even with all my very expensive electronics (my home entertainment ctr equipment) I could not hear the TV which goes through an expensive Yamaha AV Receiver and those expensive Infinity speakers 7 channel system. The main bearing for the wash drum assembly was bad. After two emails and several phone calls to both Lowes and Whirlpool, Whirlpool was going to send the so-called re-engineered drum assembly. The style I have is 3 parts; the new one according to Whirlpool is one part, but if they put the same bearing in, youre going to end up with the same problem in another year. I live in a condo of just over 920 sq. ft. so really there is no room to repair them in my home, but that is what they are going to do. I will be getting the new drum assembly delivered to my condo and have the repair company doing this dirty job in the middle of my living room.Living in a condo, I have a small utility closet next to the kitchen where the furnace, hot water tank, and washer and dryer are. The closet needs to have some areas cut out with and installed two small hinged doors on each side, so if anything ever needs to be repaired or replaced, there would be a little bit more room to move items in or out. The problem getting the washer out is getting the dryer moved so you can disconnect the electrical plug, cold water hose for the steam, plus the vent hose. First, you have to get to the water valves which are very hard to reach. Because of the way cluster housing is made, they squeeze things into very small holes like the faucets and drain hose are located. I was asked by the repair person if I could help him lift these items out of the closet. I have had 7 fusion back operations and #7 left me in constant pain that I take a narcotic drug for pain daily. So, I called Whirlpool back and said the repair people were only going to send a tech. I was told that it is a two-man job: one tech and one helper. So Lowes needs to authorize two people since Whirlpool is sending the new drum assembly for free. I wish I could have gotten a new washing machine with the so-called re-engineered drum assembly. I am still probably going to have to squeeze between the bulkhead (wall) and the washer and dryer to disconnect everything since I am a small person. If I wasnt retired, I would have bought a different brand front loading washer and dryer, probably Bosch and took the loss on these piles of Junk. I love my country and do my very best even as hard as it is in this day and age to buy US. I served my country in the US Navy during the Vietnam War, just to see the civilians willfully buy Asian everything. So now, we have 4 Asian nations that own this country. I dont know why Whirlpool changed from a company that you could trust their products to a company that doesnt give a damn what they put out the back door. These companies still havent gotten the clue why folks buy goods from other countries. I think they need to open their eyes, but I guess with Whirlpool still being a company that is selling a very large number of appliances and making money off of us, suckers, they dont need to change. The only way they are going to change is if folks stop buying their junk.

Thermal couple went out and nobody has one. You have to get it from whirlpool. This could be a easy fix with buying a $6.00 thermal couple but the one on mine has left handed threads. I took it to several parts places and they all said you have to buy it from whirlpool so you have to call the 1 800 number and they ask you how soon do you want it, 5 to 6 days to take a shower for $10 shipping, or $20 for 3 to 4 days without a shower or $32 for overnight? This ** should be free if they are the only ones that have it. I never heard of this crap before. The funny thing is they told me I should replace my water heater since the warranty is expired. Dont worry I will buy a new one someday and it will be anything but a whirlpool. I will never buy anything whirlpool again and make sure my family never buys whirlpool.

Ive owned whirlpool appliances for forty years or more, and have been consistently pleased with them. My first washer and dryer lasted eighteen years while raising a family. Brand X lasted eight years with at least four repairs before we dumped the set. We moved and sold one set with the house, but my newest washer and dryer set is eleven years, and works fine. Ive had at least four ranges. We sold two of them with the houses, but theyve all been fine, just bought a snazzy new Whirlpool range as an upgrade. Im on my fourth Whirlpool refrigerator, but again we sold one with the house and we upgraded one perfectly good Whirlpool refrigerator to a bigger side by side with icemaker. Third whirlpool dishwasher. Weve moved a lot, leaving behind appliances and buying new ones. Sure, Whirlpool appliances break down, but they sell zillions of them, and you never hear about the zillions that never break down.

I bought the Whirlpool bottom mount freezer to find out there were problems with the drainage. I contacted whirlpool and they sent the parts to fix it but they did not send a repairman. I’m 80 years old and I’m not getting on the floor to fix this issue besides pulling it out to get behind it. The ice will buildup in the freezer so I have to empty the freezer and break up the ice. If I don’t break up the ice it will frost over. I will never buy another whirlpool refrigerator and I’ve been looking at replacing this one.

Purchased 11-02-2016. This Whirlpool/Kenmore dishwasher is falling apart. Top rack wheels are totally broken, ordered parts 4 times, gave up. Now they are held together by gorilla glue. I have gone through 3 gray plastic end caps for the top rack runners. Now one is contained by a plastic slip tie. Last week it started leaking. Sears was totally useless. Whirlpool keeps sending me back to them. Now, I have to go buy another new dishwasher. It will not be a Whirlpool. Next time getting the extended warranty.

We purchased a Whirlpool Cabrio model # WTW6400SW3 in 04/08. Approx. 6 months ago, the washer started to be un-level during the spin cycle. This has progressively become worse, it now becomes un-level during the rinse cycle. We spoke with the appliance store where we purchased it, ;hey said the repairs could cost $400 or more. Thats nearly half of what it cost new. Like other complaints Ive read, cheaper washers have lasted years longer than the Whirlpool. Our last washer, a Kenmore, lasted 15 years.

I purchased a Whirlpool Cabrio washer and dryer from a local appliance center. Everything was working great. After some time, the washer began to have error codes. I would have to turn it off and restart using more detergent, more water and more electricity to attempt to get a load washed. I did purchase an extended warranty. I reported the issue to Whirlpool and I have had 7 home repair visits while still under Whirlpools warranty. The first time, the repair tech went under the washer and tightened a screw. REALLY! The next visit, the motherboard was changed and the issues kept coming back. Well, the Whirlpool warranty was now over so the extended warranty had to be picked up from the appliance center. Things got worse and had continued repair calls. After I had enough, I called Whirlpool and spoke to everyone under the sun. I tossed it outside and bought another brand washer. Several weeks went by and this washer still under the shed, Whirlpool contacted me and bought back my washer, GREAT.Now, here it starts all over again with the dryer, same issues with motherboard. Only this time, I am 1 month out of Whirlpool warranty and need $385 for a new motherboard plus cost to replace. I call Whirlpool again but only this time, they show no issues with this dryer and are not budging. I toss it out and again, purchase another brand dryer. I grew more angry by the day looking at this dryer sitting useless outside. I had it hauled off as trash. My question is how does a consumer protect themselves against these manufacturers? I do understand warranties but if it smells like a lemon, acts like a lemon, it must be a lemon!

I am so disappointed in my whirlpool W10431035A gold series dishwasher. I bought this 2 yrs and 2 months ago on black Friday at a lowes. I wanted to have a whirlpool and I thought they were a good brand. It has been a little over 2 years and my dishwasher no longer works. The start button no longer works. It is not even that old and appliances should at least last 4 years. I could understand if the plastic utensil holder or dishwasher rack breaks...fine, you use plastic. But this is an intricate part of the dishwasher....the start button and it does not work. I am so disappointed in whirlpool. It is the start button...how can this break. The only thing I do is press normal cycle and the start button...that is it. How can this machine break so easily. How can whirlpool build and sell such a faulty product. So disappointed.

I bought a Whirlpool refrigerator in February 2010 GS5VHAXWY00 side-by-side door ice maker. From the beginning, when crushed ice was used, the dispenser would freeze up. I had to remove the container to defrost. The container will not go back in place.Do not ever buy an indoor ice maker. I am out of warranty---very little help from Whirlpool customer service. They will be glad to send a service person.

Worst appliance of any kind that I have ever used. Has only on/off button, in effect. Wastes water. There is no option to change anything once cycle has begun. No soaking. Occasionally, the machine simply decides to stop and drain itself so that you can start all over again!! No idea how long cycle is. Nearly done? No idea. No matter what temp or how much detergent or how much water, the clothes are not clean. The lid locks and so there is no way to know whats going on. I suspect there is very little water during rinse cycle. All of the whirlpool appliances are similarly horrible. Washer is the WORST. Shame on you Made in America.

I bought a Whirlpool 3.4 Cu Ft. Top Load Washer, Model: WTW4800XQ on Sunday. Today is Tuesday morning, but the machine broke last night. It lasted for about 5 loads and they were not big loads, unbalanced, and yes I had the right amount of soap. Whirlpool is saying that I washed something that was not machine washable. However, that is simply not true. I washed the bathroom rugs (which have been washed many times before) and they are saying the pump is clogged. If I had a washing machine 48 hours ago, do I really have to pay a service repairman to fix it? I will never buy any Whirlpool product again.

Bought the hot water heater, installed it. It leaked from bottom. Whirlpool warranties it. Replace it with new heater. It too leaks. I Google problems with Whirlpool hot water heaters. Found over 1500 complaints.

We purchased a Whirlpool refrigerator in December 2017. Since July 19 we have had the same problem with the refrigerator three times. The technicians don’t know how to fix it and Whirlpool refuses to replace it. The customer service rep was ignorant on the phone and could care less about a problem. Even though there is a lemon law they refuse to replace the refrigerator. We have to defrost the refrigerator every 2 to 3 weeks so will cool down again. Whirlpool is the worst company we have ever dealt with customer service wise. Lowes will not do anything about it because it’s within the first year.

We purchased a Whirlpool Gold Induction range, model#WF1910H0AS0, from Lowes Home Center for ~$1700.00, about 1.5 yrs ago. One night my wife was cooking dinner on the stovetop and she heard 2 loud pops and the whole cooktop went dead. We had Bobals appliances repair look at the range and they gave us an estimate of $800.00!! to replace the module board. The repairman said the module board had shorted out and burned. Thankfully my wife wasnt electrocuted. I contacted Whirlpool customer service, they said, There isnt anything they can do. The warranty is only 1 year. I also contacted Lowes customer service. They told me the same thing as Whirlpool, nothing they can do, 1 year warranty, etc. I have the part# of the module in the stove, W10390743, serial#31811552. After an internet search, this part # had been superseded, which tells me Whirlpool knows they have a problem. These ranges need to be recalled. I plan to contact the US consumer product safety commission to initiate a recall. Please inform consumers if they have this Whirlpool induction range with this problem, to also notify the Consumer product safety commission.

I love this stove! It is nearly perfect. I wish it was easier to clean the glasstop, but I imagine that comes with any glasstop stove. The stove is easy to use, and I love the cooktime option. My only complaint is that the timer is very quiet, and when it is a timer while something is cooking, it only beeps once. If its a timer when nothing is cooking then it will go off repeatedly until you turn off the timer.

My double oven is only 6 years old - it stopped working on xmas day, had a repair man look at it. He has phoned Whirlpool and has not had his calls returned to buy the part needed. Why is this. I need my oven, why is Whirlpool making it so hard for me to have it repaired.

Will never buy another Whirlpool/GE product again. Nothing but problems. Paid $1700 for a Whirlpool/goldstar refrigerator 2 years ago. Problems from the start with slide-out shelf cracking, evaporator fan burnt out within 2 years, digital display cannot read anymore. Now have another problem again - not cooling. Going to the trash. No wonder your stock price have dropped. I would sell off to. Whirlpool/GE have been going down hill for the last 5 years. Maybe more. Cheap products, do reflect, it just a matter of time, I would think you would address these issues in your product line, but it shows your company is all about profits instead of quality of products. Keep going like you are, and you will be bankrupt. Cheap overpriced and nothing but junk in any products you manufacture.

I bought a Whirlpool High Efficiency top load washer. It does not get the clothes clean. Dark clothes come out with spots all over them. There is not enough water to rinse out the dirt. It is left on the clothes in spots. I have to take my clothes to the laundry mat to wash them to get them clean. I am 74 years old and have used Whirlpool appliances all my life. I have dt3 rental houses I keep Whirlpool appliances in. But I wont be buying any more. I had to call the repair man one month after I bought it. He had to recalibrate the machine. If all you want to wash or maybe rinse out is a pair of slacks or a shirt, it might be o.k. but not a load of dirty clothes. It is just a JOKE.

I purchased a 50-Gallon Electric Water heater in 2006, sure it lasted and worked well for quite a few years; however, in August 2014 my power bill started to rise dramatically, I live in Arizona and $300-$400 power bills are the norm in the summer months; however, a $700.00 bill will immediately be noticed. I contacted the power company and they sent a tech over who performed a lengthy diagnostic and determined that my water heater was running constantly thus accounting for the great increase in power, I contacted Whirlpool and received 2 heating elements (no charge) which my pricey plumber replaced.The problem still remained and I contacted Whirlpool again and again trying to get this issue resolved. I paid less than $400.00 for the heater installed and since Ive been having the issue Ive almost paid another $400.00 in labor costs trying to get a resolution. Ive decided to get another system and my only reason for posting this is to inform all that the Whirlpool heaters seem to be very problematic, like others Ive had plumbers decline my business when I inform them that I have a Whirlpool tank with the Energy Smart module.

We purchased our unit (Microwave Hood Combination #WMH53520AH-1) in Fall of 2013 and within a year we noticed there were occasionally problems with the sensors; occasionally when you would open the door the lights would flicker and even rarer still, they wouldnt turn on at all. Id close and re-open the door several times to try to get it to register, because if it doesnt you are unable to heat anything in it. The sensor issue increased with the passage of time, but because it was outside of the 1 year warranty, Whirlpool refused to do anything about it, instead advising that I pay $70-140 for a service professional to come out and inspect it. The biggest problem with the sensor issue in this unit is that normally, if you open the door mid-heating cycle, the microwave will automatically turn off but once I opened the door AND IT CONTINUED TO EMIT MICROWAVES - the cycle stayed on!!!Needless to say, on the occasion that the microwave is actually working and we are heating something up in it, we NEVER open the door mid cycle and instead hit the cancel button, which blessedly works. You would think Whirlpool would care about their reputation for making high-quality electrical products. A flaw in the construction or design of a product can appear if quality of materials is poor and the problem can be exacerbated over time. Which is why I assume the warranty is only for one year. High Quality Products and Good Customer Service are such rare things these days. For our next microwave (which I imagine well need soon) I think well forego Whirlpool and go with a different company.

I have a new Duet Washer and it is a nightmare. It keeps throwing the same F8 E1 code. The repair people have replaced five parts and been out four times. I feel like I have been scammed out of $900. I will never purchase a Whirlpool again ever!

Pros: The refrigerator is large and roomy, easily adjustable glass shelving, and easy temperature controls for the refrigerator temperature and freezer temperature. Cons: the refrigerator is bulky and limits space in a small kitchen. The lower freezer door does not seal very well and requires frequent tweaking and adjusting around the door seal. Also, the freezer handle becomes loose easily and requires tightening fairly often -- which is a pain to get on the floor on your back (and a flashlight plus a special wrench) to tighten the handle.

I am so disappointed with this washer. I totally dread doing laundry. The following are the complaints: Every load comes out totally twisted and wrinkled!! The soap/fabric dispenser holds water after each load (I have to take paper towels and get the dispenser empty!!!). There is not enough water to properly clean the clothes. I have never noticed a reduction in my water bill and have had this piece of junk since 4-25-13. There is NO short cycle on this junk machine. There is an odor to my towels - like they are musty - after I dry them and use them. I use Tide HE detergent and clean the washer with Affresh (you shouldnt have to clean a washer). I should have taken the time to write a review much sooner, but decided today was the day after doing laundry. DO NOT BUY THIS WASHER.

Today, after five years of washing items in the Whirlpool Cabrio top-loading, HE washer; I am taking the time to express just how poorly this machines operates. Clothes do not get clean, dish towels with dried food still have food on them, and towels get holes. If I wash items with sand after going to the beach, the dryer vent has to catch all of the sand that was never washed out. Rust has developed on the inside and drips down to ruin clothes. I would take back my previous washer with the agitator that was over twenty years old in a heartbeat. When we needed a new dryer, we went ahead and bought a matching washer. Painful decision!

We did our research and wanted to buy a new washer and dryer with a trusted brand that would last. Our previous washer and dryer (different brand) lasted almost 20 years. Our new Whirlpool Duet HE Front Load washer only lasted about 2 years. The washer started making a terribly loud noise when spinning. We had a repair guy come out to evaluate the problem and provide an estimate for repairs. He said the drum, bearings, and truing was all one unit and the repairs would cost more than the washer. The factory warranty is only a year. BIG disappointment in Whirlpool.

I purchased the French Door refrigerator only 7 months ago. It has been emitting a low pitched, loud, vibrating hum for days. I called the company and spoke with a well-trained representative who informed me that there needs to be a service call. When I mentioned that this did not indicate an acceptable situation for future dependability, I was pitched to purchase an extended warranty. Further… this company doesnt monitor Consumer Affairs. Quality and standing by a product are manufacturer qualities that were not evident during the call.

I work on Whirlpool refrigerators for a living every single day of my agonizing, miserable, lousy life. Ive never seen such a mass of dysfunctional, defective rejects as I have with the new Whirlpool side-by-side refrigerators. The ice maker never works because the water line always freezes in the door. The food in your refrigerator side will either spoil or freeze because the damper door will stick open or freeze shut. The water filter housing will start leaking before you change the filter for the first time because of the inferior quality of the plastic its made from. And of course my all time favorite the compressor will always go out under the first 5 years (Thats why Whirlpool changed the warranty from 5 years to 1 on the sealed system). Ive never been a big extended warranty believer. But, like old saying goes, They just dont make them like they use to. Definitely applies to Whirlpool refrigerators.

Most dissatisfying experience with Whirlpool. In 2013 I bought a stackable Whirlpool washer and dryer. Everything worked well for two months, and then the washer started having problems. The washer memory board unit (MBU) needed to be replaced. This was done under warranty. One and half years later I started getting the error F07 which means an electrical problem. I called Whirlpool and they told me a technician would cost $85 for a service call. I delayed the call until today.The technician came, did a diagnostic and then advised me that I would need a new MBU. The cost plus labour amounts to almost the cost of a brand new washer. To add insult to injury, Whirlpool advised the service call would cost $89. (They upped the price since my last call.) You can imagine my shock when the technician told me that the $89 covers the first 15 minutes. I paid $133.34 for one half hour diagnostic testing and to be told I need a new MBU which is on back order for at least 6 months!!! My recommendation is - NEVER BUY any Whirlpool product ever.

Greetings: I purchased a Whirlpool refrigerator on July 3, 2014. And the supports for the door to open and closed have grinded and worn out - not allowing the door to close properly, requiring being lifted up, and pushed close as much as possible. Not the quality I expected with the purchase of a Whirlpool product. I want this door repaired or replaced at the expense of Whirlpool. Having paid over $600.00 for the product, I didnt expect no problems like this at all, poor design. The weight of the door is too heavy to support a hinge mount in plastic, its ridiculous. Now cooling is being wasted, runs constantly, and just not the quality I expected nor received.

I have tried to contact Whirlpool, email and telephone call. Finally someone called me but Customer Service was poor. I asked her to have a Manager call me, but she never did. They also never responded to my email. We Purchased our new Refrigerator 21 c.f. side by side 2 months ago. The ice maker is driving us crazy. It is very loud. There are white plugs on the 2 bottom corners that make the appliance look extremely cheap. I am not happy with this Refrigerator!

The dishwasher racks in Whirlpool/Amana/Kitchen Aid/Maytag dishwashers do not last as long as the dishwasher does. The vinyl coating on the cheap metal tines wears off causing the metal underneath to corrode and rust. This rust will deposit on your flatware, stainless or otherwise. When the vinyl coating wears away at the base of the tines, the tines will break off, creating more opportunity for rust to deposit onto flatware. You can purchase new tips for the end of the tines, and more vinyl to paint onto the tines, but you cannot replace the tines themselves or paint the vinyl onto any rusty surfaces.Another option would be to buy a new rack. A new bottom rack costs almost half of what a new dishwasher costs and if you need both top and bottom racks, you will pay almost $400 for the pair. Whirlpool was not amenable to negotiating a better price on the racks, but they would sell me a new model at a price that was close to what it would cost to replace both racks! Now does that make sense? Does it make sense for appliance companies to cause consumers to have to throw out an entire appliance rather than fix it? No, and it is creating more waste and filling more landfills. My dishwasher has run great for 7 years and I refuse to buy into the rack racket! No more Whirlpool for me!

I purchased the Cabrio washer and dryer and paid for the extended warranty from Lowes about 5 years ago. After about a year, the washer had problems with excessive vibration and noise. Under Lowes warranty, a repairman came and adjusted the level. He came out several more times and made other adjustments, replaced the drum, then bearings and raised the level again. He said he could not declare the washer a lemon, even though it was because they were told this was taboo. They were instructed to do whatever they could to keep the washer going throughout the life of the warranty. Now the washer stops mid-cycle and an fl or f1 error code appears on the control board. I contacted Customer Service who said I can purchase another extended warranty for over $300 or pay their repairman for the visit including parts and labor. What I paid for the extended warranty and to purchase a new one would pay for a new washer.

My front loading machine is moldy and smells terrible ALL THE TIME -- I hate this machine and will never ever buy one like this again. I spend more money on cleaner than I do on actual laundry soap.

Whirlpool gold series wrf990slam02, just 2 years old bought from Lowes, and repairman just told me that it has a Freon leak which apparently happens often. Will have to replace some items that might fix it but he did not sound reassuring. RUN dont walk away from this brand. I looked up these refrigerators after this all started and they have a 1 star rating. I should have done my homework on this.

I have bought two Whirlpool water heaters and with each one have had the same problem: the pilot light will not stay on. I have to continually turn the pilot light on each day. I have replaced the entire flame/pilot/thermal couple assembly several times. Each time I use the unit, it works for about 2 weeks, then Im back to turning on the pilot light every day. Im convinced that there is an inherent design flaw that Whirlpool should be forced to deal with. It seems that this should be a fraud case to sell a known, documented, defective product. Shame on you Whirlpool! Its obvious that its all about the money! Band all Whirlpool water heater products!

Same old story! Whirlpool Cabrio is a lemon! I did pay a service guy to find out what the problem was - $70. I ordered a control board for $210, I still had the problems. I ordered bearings for $80. Yay, my Cabrio works! Well, this was all 4 months ago and here we go again. My washing machine is doing everything it was before I replaced the brand new parts. Im so mad! I spent $360. I couldve had a new washer, not a $1000 Cabrio, but who cares at this point! Anything seems better than this pile!

Two Whirlpool washers in six years that the barren in back of tub goes out. When the first one went out in the same month the warranty expired, I was told by a repair man that it was not worth repairing because of the cost. I purchased a brand new Whirlpool and only months later, the same parts are broken on this new front loader. How cheap is the Whirlpool app. made? Whirlpool wants to only send me a tech. to fix washer instead of replacing unit altogether. After all, the unit is only a few months old. I cannot believe I have to deal with this again.

I have an oven that is just under two years old - a Whirlpool. After less than a year, the sensor went out and had to be replaced. After less than one more year, the same thing has happened. They covered the first one, but wont help with labor or parts on this one. There is no user error. Its just a cheaply constructed oven.