Purchased 7/2015. LOVED it @ 1st being the key word. Notice grayish residue on clothing. Mainly on black. Towels discolored and lint on clothing. My kids were blaming dye in the detergent, & using Purex Crystals. I changed detergent to Armen hammer sensitive clear. Stopped using my beloved crystals. Wrong! Cleaned the rim @ the top of the agitator all the dirt & grime get ps trapped in the rims it helped some what. Additional problems occurred. From time to time started noticing unbalancing no matter the load size. Paint bubbling, peeling & rusting. The lid lock broken. Nightmare trying to get an appointment through Whirlpool. Referred to go to a dealer. Called Sears. Gave specific details whats wrong. Appointment 2 wks out. Service arrived, he had no idea why he was there. No info given. Then he said he doesnt have the part. He ordered it and said itll be sent to me approx 5 days. But wont be fix for another 3 wks. Same with 3 people from customer care. Informed this is not acceptable. Another problem now when unplugging it still stays on its hold electrical current. This can not be replaced until its deemed its broken & cant be fixed. They rather your home catch fire. They dont care about the inconvenience for 2 1/2 months.

Immediately after purchasing an entire kitchen of Gold Series kitchen appliances including the refrigerator with bottom freezer in 2/2013 from Lowes we began having issues with the refrigerator. I am not an engineer and dont profess to be, but even I can figure out that the whole thing is a problem based on a design issue. The top drips water consistently and has from the first, which has been addressed numerous times. Ice maker replaced trying to fix the situation two times. The freezer guides were messed up and off from the beginning, and had to be ordered-waited for, then installed. In total a repair person has been here, an inconvenience on our part - 7 or 8 times and we still dont have a refrigerator that works properly!The last time we had someone look at it, there was a part that had to be ordered from, yes, Mexico and we had to wait a week or so and they told us they could rent us a loaner!!! Are you kidding me?? I should have kept the old 26 yr old fridge in my garage that is still working that was built in America! After buying $8000 in appliances and supposedly a top of the line brand name that in the past has shown integrity to their products... I pay my bill each month, because if I didnt someone would put it on my credit. But who puts it on Whirlpools credit? Who is going to hold them accountable and how many complaints must there be in order for someone in the government to step up and do something to a company that is taking tax dollars from our US and sending it to other countries but selling less quality products to those who do pay the taxes? I am ready to sign a petition! I should have gone with the other brand! Any other brand would have given me a better shot than this of having less of an issue! Terrible experience and certainly NOT GOLD! Shame on YOU Whirlpool!

I have been without a washing machine for 3 weeks because my 4-month old washing machine does not work. I have had a repairman out 3 times and now one of the parts that he may need because unfortunately, its not an exact science is on back order. I have spoken twice to supervisors at Whirlpool and have gotten nowhere with them. They are trying to locate the part that is on backorder and my warranty is for repair and replacement parts only. By the time they get through with fixing this lemon, if it ever gets fixed, it will cost more than just replacing the machine! I have 5 people I am doing laundry for and a trip to the laundry mat every week is not something I can afford nor is taking time off of my job every week to meet with a repairman to try and guess what the machine is needing now. After 4 months, I should not have to even be concerned with what is and isnt covered by my warranty! My last washer/dryer lasted 12-15 years with very little ever going wrong with it. I will never recommend Whirlpool products or buy Whirlpool products again, not because something has gone wrong with the product, things like this happen, but because Whirlpool is very poor when it comes to customer satisfaction and treating their customers right. With this day and age of social networking and this economy, you would think that Whirlpool would do more to treat their customers right and build a product that lasts longer than 4 months. When I asked to talk to someone other than the supervisor I was given, I was told that she is the top person. Really? I find it hard to believe that there is no one above her that I could talk with to express my frustration and request that something be done about this problem.

I am the owner of a 4-year-old stainless steel Whirlpool refrigerator, Model GB9SHDXPS02. Yesterday morning, my 5-year-old daughter opened the fridge door to get a snack. The door came crashing down, hit the floor - missing my 21-month-old daughter by less than two feet - the drawer smashed off on impact and flew across the kitchen floor and the contents of the drawer (salad dressings, syrup, condiments, etc) went flying too. Miraculously, no one was hurt. My children were obviously upset and crying, and I was shaken. My laminate floor has a large dent and long scratch from the impact.My fridge door is broken. I cannot get through to Whirlpool Canadas corporate office to speak to anyone. The Whirlpool Canada call center is giving me the runaround. Yesterday I spoke to a supervisor at the call center who advised me that someone from the Corporate Safety Division would phone me within 24 hours - but I have not received a phone call and it has been more than 24 hours. I am noticing a complete disconnect between the gravity of the situation and an appropriate response from Whirlpool. I am a mother of 4 small children - two of which were very nearly killed/badly injured by a faulty refrigerator door. I cant even get a phone call in response. This is a serious safety issue. Im tired of apologies, some real action needs to be taken to ensure this never happens again to any consumer.

I have a washer, dryer, dishwasher, hood vent, stove top, and oven, all Whirlpool. I cant say enough how pleased I am with this product. My old washer and dryer was over 23 years old when I needed to replace them. Thank you Whirlpool for making such a quality product.

I purchased a Whirpool fridge five years ago. To date it has had 7 repairs. The latest round has lasted over five weeks and the expensive warranty I also bought is about to run out. The repair man is on his third repair and I havent had refrigeration for five weeks. In the meantime they wont replace the fridge, and it takes two weeks between scheduled visits by the authorized repair man.

Because the Korean appliances are a problem for repairmen, were stuck with a Whirlpool choice. Seems to be a good fridge. Noisier than my Kenmore (Korean). I got instructions from repairman on opening right door first and closing it last. Otherwise rubber wears out too soon. If I put anything on left door opposite ice maker, it freezes, making that shelf useless! We had ordered a Kitchenaid but the installers damaged it.

Whirlpool Gold French Door - I purchased this fridge in Aug. 2009 (model GX2FHDXVQ00 22cu. ft. French door with bottom freezer). Paid 1800.00. The fridge stopped working after 5 years, but the freezer works fine. A fridge should last at least 10 years. I wont buy another Whirlpool appliance! JUNK!

I rent a condo unit and hardly use the microwave. It is nice to have. Never had one over the stove and it came with the unit, so I gave mine away. After living here for 3 years I am now moving to another city 5 hours away. I noticed the other day when I went to melt butter for popcorn, the door crack, which I noticed the second year we lived here, has gotten worse. Not just worse, but the handle looks like one pull and its completely broken. My landlord expects us to pay for this. I am reading and I see that its from the heat from the stove, which is also a Whirlpool product, is to blame, not the user. How is this right, how is this fair?? When we move we will have to buy a new microwave, that will sit once again on my beautiful microwave cabinet and I promise, it WILL NOT be a Whirlpool!!!

Microwave Model # MH1150XMB# - I have had this microwave for 6 and 1/2 years. It came with the condo I purchased. Shortly after I moved in, I noticed hairline crack in the frame near the handle. I have replaced this door once and now the second door has done the same exact thing - formed these hairline cracks in the door frame. This is a defective product and needs to be taken care of by Whirlpool. But you keep denying the problem. No one can afford to replace a door every year. The microwave still works, but the door has fallen apart. The remainder of the microwave works fine.

My Whirlpool refrigerator does well overall to maintain food items. However, even at the lowest freeze settings, some of the food items that are stored towards the rear of the refrigerator shelf have a tendency to freeze. This oftentimes results in food items having to be wasted. Other than that, the overall appearance and performance of the Whirlpool refrigerator is great.

About two months ago the washer starting stopping and the UL light continued to come on during every spin cycle. So I would adjust the clothes and start it again. So I decided that I should call a certified serviceman to come out and access the problem. Today a certified serviceman came out to access the problem. After about twenty minutes I was told the tub needed to be replaced and the cost and labor would be $600 or more. I do realize that the washer is about 8 years old but to completely need a repair like a new tub. I am very upset and have no idea what to do.

I thought with the big tub I would be able to wash my king size bedding and other large things. Theres barely enough water to wash a small regular wash. Since it has no water it does not clean my clothes. Why the big tub if you cant use but one fourth of it?

Stay away from all Whirlpool products. The appliances are terrible (broke twice for different reasons within 14 months of purchase). Customer service wait times are over 90 mins and the technicians take over 3 weeks to get to the house and they dont fix it, they order the part and that takes another 3 weeks for it to arrive and the technician comes back. We bought an extended warranty and when the fridge broke a second time, they canceled the warranty and said they had the right to cancel it as it was in the contract. Terrible, terrible company. I work in the service industry and I am in shock that this company can get away with treating customers like they have.

Had washer less than 1 year and washer stopped and was flashing code F 51. Called Whirlpool and they sent a repair person. He worked on it and didnt fix problem. Called Whirlpool back. They had to order parts. Repairman came back - replaced parts. Now not 6 months later same thing happening. Whirlpool said we have to pay for labor to repair again. We went online after this happened the first time and saw where others had same problem - this washer should be recalled. The repairman said this part was corroding. This should not be happening on a new washer. We will never buy another Whirlpool product again!!!! Im concerned that it will keep repeating over and over and we paid 700+ for this washer not 1 1/2 ago. My last washer lasted 15 years!!! Wasnt a Whirlpool!!!

We purchased the gas slide in range with gas oven. Immediately the temperature would hold a consistent heat, therefore it continually reset with a start sound (swoosh) every 5 minutes. The manual says it will do this, but clearly this is not normal. Then, the oven stopped working, showing an error message FBE0, that the cooling fan is not at high enough speeds! It sounds as though, along with hundreds of other people, we have all been ripped off! If anyone can please tell me what can be done about these defective stoves, I would appreciate it, thanks very much!

The Whirlpool range #GY398LXPQ00 is four years old. This is the fourth major problem. Oven overheats and will not function. I set it at 350 and the bottom coil and broiler both came on and overheat quickly. This is the third time with same problem. I am going to have enough invested in repairs to buy another range. I shall never purchase another item made by Whirlpool or any of its affiliates. That leaves me with Samsung or Bosch, I think. The people are very curt and offered no help at all so calling them is extremely useless. This range is definitely a lemon. Too bad, there arent avenues to make them replace it. I am angry, disappointed, and disgusted. Are you listening, Whirlpool? Never again. May your company go down the drain.

We purchased KitchenAid Model YKESS907SS05 Electric Range from Appliance Canada April 2012, just before we took possession of our new home. We began using the range in July of that year and it worked well until September 11, 2014. At that time we decided to use one of the features of the range which is the self-clean feature. During which the control panel failed and our oven ceased to work.We contacted Appliance Canada and they suggested a technician come to assess. We called the suggested number and they send a technician that was not Whirlpool certified and we had to pay out of pocket for the visit $158. He did absolutely nothing during the visit. We then called Whirlpool Canada and they informed us that he was not Whirlpool certified and to call Appliance Canada, we immediately called Appliance Canada and made arrangements to have certified technician come to assess. Whirlpool Canada also indicated at that time that the board that failed was still under warranty and we should not have to pay. September 22nd the second technician came to assess the situation, used tape to cover the front blowing air duct so as not to have the hot air blow back onto the control panel. This was a temporary fix, they ordered a control panel in the interim that they would then use to replace. The control panel came in October the 22nd, was replaced and the new board was faulty, put old one back in and re-ordered another board. The part was on back-order. By mid November, after numerous calls, we called Whirlpool directly. They authorized that the technician to get the part from another supply source. On November the 26th, technician came back - tried new board could not get it to work, left it with us and ordered additional parts. At that time the technician who was taking the case had a family emergency and would not be able to come back out until the new year. Subsequently, Appliance Canada authorized a new company to resume our work with a new technician (Toronto Appliance). He came out December the 17th, with the board that was left behind, he was able to get the oven working. December the 22nd while in the middle of cooking a meal, the oven failed again. We called Appliance Canada and they had a Technician scheduled to come December the 24th from Toronto Appliance. However, on December the 23rd the oven resumed working. The Technician came on the 24th but because the oven was working again could do nothing. On December the 31st, while dinner was in for guests, the oven failed yet again. We called Appliance Canada, yet again, and they scheduled another visit with a new control panel and additional board. The technician arrived again today, January the 28th, and could not get the stove working. He was instructed to order an additional part and we are to wait another 2 weeks. In total, we have been waiting for 4 and a half months, we have also been told that we were not to have used the self-clean as this causes these types of problems. Why is it offered, in addition, Whirlpool has not supported our direct calls, nor authorized the replacement of a product, that for all intents and purposes, is faulty. We have had no success in the resolution of this issue nor support to reach a resolution from all parties involved. I would suggest not buying any product from those involved as their lack of support for their product is appalling.

I purchased a Fridge/Freezer just over 4 years ago. It was an expensive one. The gas is gone and they cannot re-gas it. If I was told this when I was purchasing it I certainly would not have spent this money. I rang the concessional team. They would give me nothing towards a replacement as they had not one in stock, POOR Service for a big company. I am in business and this is not the way I would treat my customers. This has certainly turned me away from purchasing Whirlpool Products, despite having a industrial washing machine and Dryer. For the record, I had 2 servicemen to check it and they were most pleasant. It was beyond repair.

BEWARE THE TEMP CAN BE 25 degrees off high and 25 deg lower and Whirlpool says that is within specifications. My oven temp was set at 350 and nothing was cooked... After 7 repair calls with their certified repair companies (the 2 worst repair companies that I have ever used) I was told that if you set your oven at 350 that if it stays in between 325 and 375 that Whirlpool claims that it is working fine and will not do anything. I called and talked to customer service and asked the lady that if you set your oven at 350 should it stay within a few degrees of that and she said YES.The people that work at Whirlpool do not even know what kind of junk that their company is selling. I asked to return it and get a more expensive model hoping that it would work better but they said that they sell ovens and do not buy them. Be sure to get in writing from your sales person that your oven will constantly hold the temp within a few degrees. I tried to do the Whirlpool survey but after 11 attempts they said that there was errors in receiving and they did not get it. If you buy Whirlpool then you did not ask the right questions. I WILL NEVER BUY Whirlpool again (unfortunately I have a Whirlpool dishwasher and refrigerator that are not much better) and if you do you will say the same things and be out Thousands like I am.

I bought a commercial coin operator washer (Whirlpool washer model CAE2743BQ) for $800 and after using it for 4 months the washer stop working. The main board panel lights turned all and the washer did not start. Called Whirlpool several times and nobody could help me and told me to look online for a distribution center to get parts. The customer service only knew about regular washers not coin operator. The washer had only 3 months warranty from Home Depot and I was supposed to pay for all the repairs and Whirlpool would pay for parts. So far I spend $400 in repairs and the certified technicians could not repair the washer. They replaced the actuator shift, the main board etc, etc and nothing. The technicians reset the washer at least 10 times, calling Whirlpool tech support and the washer worked for one load and the main board lights stayed on all over again, the start button did not work. I sent a letter to the warranty department that I got online and they told me to call the same 1800 that I had called at least 50 times in the past year. Now it has been more than one year and the machine is defective. Technician said could be the soap that my tenants are using, or overloading the washer or an electric problem that they cannot identify. I gave up... I will not buy a coin operator heavy duty washer from them again. I requested a return authorization for a defective product and I did not get anywhere. Thanks.

Thermocouple failure on a Whirlpool water heater - We are having trouble finding the part to replace it because the thermocouple is threaded left-handed, and Lowes does not seem to have any replacements in stock locally. Meanwhile my tenants are without hot water, and my repair bill is escalating due to labor.

Bought this washer two years ago. First experience was when a load of towels became wrapped around the agitator. Called in service tech who told me to load the bin with the cloths pressed against the bin wall away from agitator, as if the cloths/towels would stay away from agitator. Two years later, Im ready to the machine to the street. Forget sheets and bedding. The agitator wraps them so tight that I almost rip the cloths/sheets to unravel. I had to wash a pair of work pants that were soiled with mud three times and there was still a stain. I will NEVER EVER buy another Whirlpool product.

There is a chronic and well-known problem with recent French door, bottom freezer refrigerators sold by Whirlpool, including the the brand names KitchenAid, Jenn-Air, Maytag, and Amana. The problem is caused when the defrost drain freezes, preventing defrosted water from reaching the evaporation pan. After enough water builds up, it overflows along the front of the refrigerator. In my particular case, we have wood floors and they were ruined by the water. After doing some investigation on the internet, I have learned that this problem affected approximately 1,500 model numbers sold under these names. These model numbers are listed in a Technical Service Pointer issued by Whirlpool.In August 2013, after experiencing several years of problems with these units, Whirlpool issued a Technical Service Pointer W10632338, advising service technicians that a new P Trap drain tube kit was now available, and suggesting that the defective duck bill check valve should be replaced by this new part. The problem for years had been that the rubber duck bill check valve would, over time, become sticky (or tacky) and would then not open - causing water to build up above it. Eventually, the water would freeze and since newly defrosted water could no longer escape, it would build up and eventually overflow.From what Ive seen online, plus a conversation with the Sears technician who come out to diagnose and repair my leak, I am convinced there are many thousands of customers who have experienced this problem. Because it takes a while for the rubber check valve to become sticky and no longer open, it is not uncommon for the problem to not appear until after the standard one-year warranty has expired. From reports, Whirlpool has sometimes acknowledged the problem and effected repair of refrigerators no longer under warranty.But what about those customers, like me, who have experienced water damage to floors and cabinets? Shouldnt Whirlpool be liable for those repairs, too? Id be interested to know if anyone knows of plans for a class action lawsuit.

I bought my refrigerator side by side on April 16th 2010 at Lowes. Not even six months, the liner inside started to get cracked. I called and they send serviceman. He just put a tape to cover the cracks. I called Whirpool corp and they told me its cosmetics issue so our warranty does not cover cosmetic problem for as long it works and cools. I will never purchase Whirpool brands. Lesson learned.

I recently purchased a Whirlpool refrigerator, model number WRT351SFYB00. Several months later, I noticed a small amount of water on my kitchen floor. I moved the refrigerator and found the hard wood floor under it had been completely ruined, so the leak had obviously been going on for a long time. Possibly since day one. I called a repair man. He identified the leak was coming from a cracked drip tray which was not uncommon. However, much to his surprise, due to the design of this model, he was unable to remove and replace the tray. He explained there was a metal panel bolted in place that was preventing him from replacing it. He said this panel was also bolted to the compressor. Therefore, the best he could do was caulk whatever cracks he found in the existing tray and hope for the best. It goes without saying he could not guarantee his work like he normally does.I noticed this same complaint on a user forum website on Appliancepartspros.com, so this refrigerator obviously has a significant design flaw. My repairman said if it was his refrigerator, hed get rid of it, and also indicated that after seeing this, hed never again recommend Whirlpool to anyone. All I know is that Whirlpool is permanently off of my list now as well.

I purchased my Whirlpool Duet in 2007. I have since paid more than what the washer costs in repairs. Now, the metal that braces the basket has corroded and fallen apart. Ive read that this has happened to many people and since then the company has changed the part. However, they are unwilling to send a new part to me. I will never buy a whirlpool appliance again.

I purchased a new Whirlpool Cabrio washer and it has been nothing but a headache. The machine constantly rips our clothes and stretches them beyond repair. Now, the washer keeps showing an F1 error code and I have to restart the machine three times to get it to start. It also stops in the middle of the cycle and I have to restart it. What a piece of garbage! I called Whirlpool several times and they do not stand behind their products. Do not buy Whirlpool. I filed a complaint with the Attorney General and I suggest anyone else having the same problems should do so. Maybe we can get this machine recalled.

My Cabrio washing machine is 3 years old, and is working the way it has been designed to work. It does not clean clothes and it consistently has a foul odor. Due to the odor, I must use the cleaning cycle with Affresh (pricey product) 3-4 times weekly. Even that is insufficient. Because it is in an indoor laundry area, the odor permeates the hallway and nearby bedrooms. The extra cleaning cycles are contrary to the energy efficiency of the washer, and detrimental to the severe drought conditions in California. When I contacted Whirlpool about my situation, they recommended I substitute bleach for the Affresh to keep the cost down.

I have a two-year-old top of the line Whirlpool Duet Steam washer. Cleaning performance is adequate at best, but my biggest complaint is about the visible mold buildup that collects on the water dispensing plate as well as on the detergent, bleach and softener dispenser and rubber lining of the washer opening. I have cleaned the removable detergent dispenser weekly since purchasing. The water dispensing plate has a continuous buildup of thick black mold that can only be removed with a tooth brush and bleach and only a small portion of those openings are reachable. I have cleaned the machine with Affresh as recommended and exactly as the manufacturer recommends. Nothing changes! I contacted Whirlpool and was told this was normal for all washers in which some moisture always remains and that I should continue to clean and leave the door and dispenser drawer open to allow the areas to air dry. So, I have done all of those things for the past year and nothing has changed! I received notification that a class action suit had been filed against Whirlpool for this mold issue but have not been contacted in any other way. Not only is this mold visibly disgusting but certainly is worrisome from a health perspective. When I contacted the company a second time, I was told there was nothing that could be done and it was in no way a design flaw on the part of Whirlpool.

Whirlpool Cabrio WTW8500DC0 - 2 months out of warranty, 14 months old. Motherboard fried. $300 if I do it myself. $550 to have it done. The unit was $780 on sale. Brand new piece of junk. Zero stars but thats not an option. Quite honestly, it doesnt clean very well and it doesnt rinse very well so we have to rinse twice to get the smell out if we use bleach. So whats the sense in buying a high efficiency washer? I work outdoors and weve had cheap washers in the past that clean much better and lasted many years.

We purchased the Cabrio Washer and Dryer from Lowes during a Black Friday sale, November 2016. The items were delivered when we closed on a new home. Thus, we didnt start using the washer and dryer until 3 months after purchase. One month after usage we had our first service call. To the point, what the other reviews say are the exact experience that we are having. Unfortunately, we did not do our research before buying. The washer: Clothes come out wrinkled, littered with lint, and the wash cycles are excessively long. The dryer: Clothes take a long time to dry, and most times we run the dry cycle twice because, after the first cycle, the clothes are still damp.Even though the washer and dryer can accommodate larger loads, we are forced to break out the laundry into smaller loads to get better results. Still, doing the laundry is negative experience with the Cabrio. Recently, it took nine hours to fully complete 5 loads of wash. That included the dryer cycle. The repairman said that he is well familiar with the issue. It is the new technology. The software is incredibly sensitive and can fault easily. This leads to another negative feature. The software is restrictive leaving the user with little control over how they want the wash and dry cycles to perform.Going back to the conversation we had with the repairman. He said he had a Whirlpool washer and dryer at home that was over 10 years old. The old fashion kind with the dials and less complicated technology; and he has never had an issue. I have to agree with that. Our second home has the Whirlpool Duet (washer and dryer) that are 13 years old. Never had a problem technically and with washing and drying clothing. We plan to try to contact Whirlpool about their return policy. Not a quality product. Definitely cannot recommend this washer and dryer. We truly purchased junk.

Not real expensive but cleans almost perfect. Were happy. MUCH better than the beautiful and pricy Samsung. We returned it for this. Paid less than Samsung but always purchase extra warranty. So far so good. Pretty quiet. Nothing to complain about except be very careful how its loaded to get the best cleaning. Heat dries dishes really good. Looks great but not better than others.

My husband purchased a Cabrio washer and dryer pair for Christmas 2010. I have faithfully used the affresh every month, and spent a fortune on it I might add. But for about the last year or so, no matter that the washer has been cleaned at times when the load is finished there is all kinds of black stuff in the tub and on the clothes. The tray under the detergent dispenser is all black and nasty and impossible to clean thoroughly. The black stuff will come through the holes in the tub as well. Water stands in the bleach dispenser at times, fabric softener does not all dispense, the LID is broken and has been but I cannot afford over 200.00 for a LID and about 100.00 to have repairman to put it on. We do not have heavily soiled clothes that would create excessive dirt, never have had and we are now retired so we surely dont now. Bottom line, I thought maybe this would be the last washer I would need but I hate it. It is only 5 years old but I am stuck as I cannot afford a new one now. Factory rep says if it is cleaned as it should be, I should not be having this problem. Not true, it has been cleaned as recommended!!!

I purchased a Whirlpool Duet washer and dryer set in 2008. The washer control panel lasted 3 years. Because I did not have an extended warranty, Whirlpool would not do anything to accommodate me, despite the exorbitant cost of this machine. I told them that I would never buy another Whirlpool product. It is now 2017, and I have not purchased any other product made by Whirlpool. I want to make sure that a company manufacturing expensive machines designed to break within only a few years of normal use, goes out of business. Spread the Word to everyone you know about Whirlpools garbage machines. Maybe if enough consumers purchase products from other manufacturers, Whirlpool will get the message that they need to manufacture quality, long lasting machines. Try Speed Queen instead.

My mother and grandmother swore by Whirlpool washers. They were the best. So, naturally I never wanted any other brand - then came the digital machines. End of an era. My experience with my 1 year old digital machine has been very frustrating. I do not like it. I prefer the old system.

Whirlpool Cabrio top loader washer - I am writing to really complain about a washer I bought there at Metro. The people were great BUT this washer has been a REAL DISAPPOINTMENT!!! It is only 4 years old and I have had to have them come and replace the top of the machine. It has rusted around where you put the bleach, the soap. It leaks underneath the machine, its rusting on the bottom of the machine horribly. SO DISAPPOINTED!!! We bought all WHIRLPOOL products - washer and dryer, stove, microwave, dishwasher.What is it with these things? They rust so easy. I had a washer before this one for 14 years and it never did this. I guess things are not made with the same quality as years ago, but I will not ever spend my hard earned money on WHIRLPOOL AGAIN!!! I guess I will have to put up with this machine till I can afford to buy something else. VERY DISAPPOINTED CUSTOMER!!!

I have always had Whirlpool Everything - not anymore!!!! I purchased a water saver washer that I am very unhappy with - it does not get the clothes clean. I have to put it on an extra rinse (water saver?) to get the soap out. I use the Tide for HE washers. I cannot wash a large load in it - directions say I can. Anything too heavy or bulky will not spin out well. Will bounce all over the place. From now on I will switch to another brand. They push so hard to buy a warranty because they know you will have trouble! Should have read the reviews!!

We bought a Whirlpool washer (Model # WTW4900BWO) and dryer (#WED4850BW) and within 2 months I was having problems with the washer AND dryer. Every time I washed a load of clothes, the clothes would have some yucky stuff hanging all over it. I called Whirlpool and was told to try setting the washer on 1 Rinse with Softener even though I never use a liquid softener. Their suggestion did solve the problem, but why doesnt a brand-new washer work the way its supposed to? A short time later, my dryer buzzer stopped working and the knob would not advance when set on the Energy Preferred setting. I called Whirlpool again and was told they did not have a service technician in the area where I lived and that it was not likely that one technician would come on the same day to service both machines. I asked why they would sell their products in an area where they were not willing to service them and they said that is the choice of the store that sold it to me. Then they told me there was a service technician available about 40 miles away and they would fax the order to them so they could contact me. The technician who came did look at both machines and was able to determine that the control panel needed replacing on the dryer, but was not able to do anything about the Rinse Option problem on the washer. He suggested that I continue to follow the recommendation of Whirlpool as long as it works. I can do that, but Im not happy that a new machine does not work the way its supposed to. He also recommended NOT using liquid laundry detergent or fabric softener in my washer because it contains animal fat and can build up and cause problems. Nowhere in the manual did it say that. He took the washer apart and showed me how it was already building up under the washer basket. I told the technician that my laundry has had an unpleasant odor to it when it comes out of the washer and even after it is dry. He said that might be because of the small amount of water that is used in the energy saving washer. If these problems cannot be resolved, I consider this washer to be a lemon and hope it will be replaced with a new one. If I had to do it all over again, I would buy a traditional washer. I liked the idea of conserving water, but not if my familys clothes stinks.

Whirlpool Cabrio 4.3-cu ft High-Efficiency Top-Load Washer - I wanted to buy American. My Sears front loader (I had for 13 years) died and I couldnt get someone from Sears here to fix it. So I bought this Whirlpool from Lowes 4/20/15. I want to be able to wash sheets, towels, clothing and sometimes a blanket or a sleeping bag. I re-use my washer water for the garden and use no chemicals or fragrance in my washer soap. When I bought this, my washer had died. I was kinda desperate to buy a new washer. I went to Best Buy and Home Depot. There were ads all over Lowes advertising: Same Day Free Delivery + Installation. While there was no one in the Appliance department, I went to track someone down so I could pay and get out of there. I was told that it would take 10 days to get any of the washers I was interested. I didnt have 10 days, so I called my appliance repairman and he came to get the washer and install it. The deal breaker is that this machine vibrates the clothes clean - not water, so the fabrics are trashed and the sheets get all tied up. I had the factory repairman come and he told me you cant do comforters, more than a sheet or towels in this washer because its energy efficient! I should take my towels and sheets to a commercial place!! I called Whirlpool and wanted to exchange for another and they were not at all agreeable. No one else complains. Even after I looked on the internet for reviews on this machine 250 out of 350 had the same complaints as I did. I cant even donate this to a homeless or animal shelter if they dont suggest you wash sheets and towels in it!!! This rule was nowhere in the literature and the info on the top door doesnt say that either! Imagine my dissatisfaction!!! What homeowner doesnt wash towels and sheets???

I bought a Whirlpool microwave oven last year.The last one year, it has worked fine. The day after the warranty period was over, the microwave oven is not working .The rotating part is not rotating, so I called your customer care center. They sent one guy to trouble hoot, he said that the rotating part is faulty and I need to spend around Rs. 3,500.00 to rectify the problem .The cost of the microwave oven is Rs. 6,500.00.How can I spend Rs. 3,500.00 to rectify the problem? That too, how it happened the day next to the warranty period. Now, I have a doubt that as I purchased the article in Saravana Store T Nagar/Jayachandran stores in T Nagar, whether I am getting such kind of problem. Because when I purchased, they gave me a lot of gifts. That time itself I suspected.I trusted Whirlpool Company. I heard that Whirlpool Company is good so I purchased a double door fridge 5 years ago. The same problem I had when I purchased the fridge, the day next to my fridge’s warranty period, it happened to me. That time, I did not think like that. But now, the same problem happened to my microwave oven. So, I am suspecting about the genuinity of the Whirlpool Company. I am totally dissatisfied about the product of the Whirlpool. I will give you my microwave oven. You take it freely. You can use my microwave oven for your demo purpose. So that in the future no customers will have problem which I had. Do reply to this mail and let me know when you are going to come and collect the article.

I have front loader, Ive left the door open after washes, run cleaning cycle once a month, never had any issues, like with anything. If you take care and service it regularly it will last a lifetime.

You Have Been Warned! Do Not Buy A Whirlpool. We bought this Whirlpool washer from Lowes. It is a top loader without the agitator in it. The sales pitch was very good. One of the best washers on the market. It was less than 1 year old when it started getting out of balance. We would stop it and rearrange the clothes and start it back up. Over a few months it just got worse. Now, it will scare you when it gets out of balance. You cant set within 5 of it or it will run you over when it jumps, but you have to set close enough monitoring it or it will run out the door of the utility room after you. Now, I find out the Maytag has bought Whirlpool Corp. Not a good move for them. Whirlpool has mess its own name up, why would Maytag want any part of it? I dont think I will trust Maytag anymore either for fear it may be a Whirlpool.

I am so bummed that this fridge died. It was perfect in size and function and appearance. I didnt use the ice maker. Within the first year, the temps were erratic, freezing in the fridge area at the rec. setting and too warm when I lowered it. Finally the compressor gave in at 19 months. Of course, out of warranty. HOWEVER, my credit card, VISA, added a year of warranty and is paying the full amt for replacement. Now I have no idea what to get. Every brand, American or Japanese is not made to last. I regret getting rid of my old dependable avocado fridge, thats how hard it is to feel confident to make a good next purchase. Formerly reliable names are only that, OLD NAMES WITH SHINY LOOKS AND JUNK INSIDE.

My microwave is a Whirlpool WMC10511AW purchased in Jan 2014 for $150. It is very light weight and moves around when opening and closing the door. I have to use something behind it on the counter top to keep from moving backward and causing problems getting things in and out. In the first year we had problems with the door latch, but after a while it stopped being a problem. I am used to the stability of Amana Radarange so these very lightweight microwaves seem really cheap to me. It works fine at this point but it seems that these really inexpensive countertop microwaves have to be replaced about every 2-3 years where an Amana which costs a lot more lasts for around 20 years and are very stable not moving around all the time.

I purchased a condo last year with all appliances included. My Whirlpool refrigerator model is GI6SDRXXY00, a fairly new refrigerator. I noticed orange and moldy spots on ices when dispensing them. I changed the filter, thought maybe it is the filter causing the issue. But after inserting the new filter and emptying the entire ice tray, I still get bad ice! I open the compartment, and surprisingly, found out that the spiral rod inside the ice dispenser was rusted! This is horrible and unacceptable! This is not a user fault but a manufacturing defect. The parts that are in direct contact with what customer consumes should be robust and safe. I contacted customer service, and they gave me a technician phone number which turned out to be a third party which only cares about money. They said they will inspect the refrigerator and will charge me $134.00. I will not use this refrigerator anymore and will replace it soon. AND I will never purchase any more Whirlpool products. This manufacturer is crossed out from my list of vendors who I do business with.

Whoever came up with the idea of this AquaLift oven cleaning method should be fired! This method does not work. Ive barely used my oven but had some cheese pizza drip on it so thought I should clean before using again. What a JOB! The spill did not come off the bottom entirely and using the non-scratch scrubbing sponge was a joke. There is some soil on the sides and back of the oven that I will have to use elbow grease to get off and Im going to have to crawl into the oven to see if they can be remove. Welcome back to the old days before self-cleaning ovens!

We purchased the Whirlpool Gold Gas Range (model #GW399LXUQ06) in November 2011. Last week, I noticed the porcelain enamel finish on the stove top grates has fallen off in pieces. I contacted Whirlpool today, February 14, 2012, about this issue and they advised me it is a cosmetic problem which is not covered under the warranty. They advised me that it would cost over $100 per grate to replace. We have had this stove for less than three months and I feel these grates are defective and Whirlpool should be responsible for replacing them. I am very dissatisfied with this stove.

I purchased this washer model WTW4950XW0 new. Within 6 months, it stopped spinning and was repaired under warranty. The spin actuator was defective. Great. A few months later, it stopped spinning, repaired under warranty and the spin actuator was bad. A few months later it stopped spinning, repaired under warranty, and the actuator was bad. Great. Another few months it stopped spinning again. This time, Whirlpool sent someone to repair it, another bad spin actuator. This time we had to pay for the part. So now that we are completely on our own, it stopped spinning yet again. Let me guess. The spin actuator is bad!!! Incredible. What a piece of crap. This washer was never used heavily.

Whirlpool fridge with ice and water dispenser that broke down within days of install. The water dispenser stopped working after the first flush and Whirlpool were notified. They engaged a useless repair company who have been unable to resolve the problem and will not communicate updates. Whirlpool have been fully informed of the problem with their brand new product which was defective practically from the start and have washed their hands of any involvement in resolving the problem with their appliance. They defer defective product as a warranty issue and leave the consumer to chase after people to get a repair done. For a brand new $3,700 fridge that doesnt work within a week of install I just cannot believe they would sell a defective item and make their consumer suffer for it.What consumer would knowingly choose to purchase a defective appliance? If you end up getting a defect, the company should make it right....right away. Im at 2 months now without a functioning water dispenser on a fridge that is only 2 months old. Just disgusting.

Absolutely the worst hot water heater I have ever owned. Broke within first year which Whirlpool sent me a replacement valve assy which I had to install myself. That one failed in 3 month and unit was out of warranty so I received no help from Whirlpool. Had a serviceman fix it again and it failed again. So I ended trashing the unit. I would not buy another Whirlpool product as long as I live. The last 5 appliances I purchased from Whirlpool all failed within a few months after warranty expired. This is no joke. Everything they sell is farmed out to other countries than the US and the workmanship and quality is the worst I have ever seen. The service people are nice when they tell you that they cant help you with your problem. Dont waste another dime on Whirlpool! Very bad product.

2 years ago, I bought my fridge from Home Depot and the delivery people did not leave a manual. I call to see if they could provide me one because I don’t know how to operate some parts of it. They told me they don’t send manuals anymore. She referred me to a website to download it from an online site. I told her I don’t have a computer. It would be easier if they can send me something in writing and this lady told me that they don’t. She asked- “and you come to us after two years? What have you been doing in the meantime? “And from then on she was very rude and she transferred me to another lady that was worse! I do not need this! And the fridge is very noisy. I’ll never buy Whirlpool again.

I had purchased this washer from Lowes last September and had problems almost immediately. First of all the lid would lock and hold my clothes hostage till it decided to reopen which could be days. Finally it never opened again. Called customer service and sent someone out. It took almost a month to get it back to running. 1 week for him to show up then 2 more weeks for the part to come in 1 more week for him to grace me with his presence again. Had to call again because the mother board then went. Another month. Now just out of warranty I go to wash and its dead. No lights on nothing. This machine is the biggest pile of garbage and waste of money I ever spent. Barely made it 1 year.

I purchased a Whirlpool washing machine (model: AW01D8810 S silver color) and a Whirlpool refrigerator (model: WBM329 TI) together from United Arab Emirates for Dhs 1999/- & Dhs 1199 /- respectively on 28 Jan. 2011. I sent this machine to my hometown (India) in the same packing and I used the washing machine only for three months and found a complaint. I informed this to service center in Trivandrum, Kerala. Their team came to my home and told me that warranty cannot be given as I purchased machine overseas. They added that the PCB for the machine is having complaint and they dont have stock in India. Also, the machine is no longer available in the factory. The Whirlpool company completely stopped manufacturing the abovementioned model. Again, I came to UAE and contacted GEC group of companies for the PCB part. I got a quotation for PCB Dhs 425/- but the items is ex-stock with them. The machine cost only Dhs 1999/- and if I spend Dh425/- only for PCB, and the machine is with me for the parts since one and half years. I dont know what to do. If I spend another Dhs 600 + this PCB cost then Id rather go for another new branded washing machine. The model of machine is AWO1D8810S and serial no. is 12 nc 859247463000 003. Please advise what to do or if I can find the PCB in Kerala. What will be the cost? I am ready to pay the money for PCB but not for the above rates. Please advise, sir.

Bought this machine June 23, 2016. First use, I called Lowes where I purchased it to say there is something wrong as it makes a grinding noise. I was informed that is normal for agitatorless machines. I asked if he could hear the noise, and he said yes, thats it. So I disconnected thinking, Wow, who makes a machine in todays technology that is so loud you think something or someone is in serious pain?! Now am at the point where I want this design in pain out of my house! Going to Lowes today to try and talk rationally for a complete refund so I can purchase an LG or Samsung which is what I should have done originally.

This is my first electric range. It’s amazing! It cooks evenly and at the exact temperature! The stovetop has size adjusted burners, again at the precise temperature. And the look is very sleek & modern, perfect for a new kitchen! I am so very pleased.

I purchased my Whirlpool refrigerator from Best Buy 11/20/19. It has been nothing but a nightmare. It freezes up and defrosts into the refrigerator.! I called Whirlpool about the situation. The company they use to fix my fridge S&S Appliance has not been keeping accurate records. I have all the calls from Best Buy and S&S Appliance. I was told today-all my records didn’t count. Best Buy Geek Squad couldn’t repair so they turned everything over to Whirlpool. So about every week someone comes out and fiddles with it and tell me it is fine. 2 days later the same. I have owned many Whirlpool products and never have I been so disappointed. Their service has been neglecting and I don’t know how anyone would want to buy Whirlpool. They have set me up another service appointment with S&S Appliance. Obviously I have bought a lemon and no one takes any responsibility. Good luck with Whirlpool!!

I had whirlpool microwave model # WMH32517AS-2 that came with my new home in March of 2013. In September of 2013, we noticed there were times that the microwave failed to warm the food or liquids (coffee) sometimes at all. Then we figured out that we could hear the noise it makes when it actually warms the food. So after a repair man came out and saw the issue of not warming up, he replaced many parts but within a day we experienced the same issue. Whirlpool had a different repair man come out and replace additional parts hoping it would fix the issue but unfortunately, it did not. Whirlpool said they would send another microwave to us in January of 2014 but now its April 2014 and nothing sent and I have a broken microwave in my house. Due to the length of time it has been, I had to submit this. We have also called customer service on 5 occasions (who have these call documented) and the person that was supposedly helping us and assigned to our case 7 times with no response. We have attempted to talk to a supervisor but were told that I could not, which is unusual. Its just frustrating that this is happening.

I purchased this dishwasher (whirlpool WDF330PAHW2) in February 2019. Really worked great until May 2020. Now doesnt drain on the last cycle, smells bad (even though cleaned) and door leaks under handle on front. Really too bad. I have been a Whirlpool champion for 25 years. Now not so much.

I purchased a refrigerator 7 yrs ago. I paid over $1800 on sale for it. Now it needs repairs, it already cost me $89 just to have the tech look at it and he said it will cost $300 to $500 to fix it on top of the service call and now he informs me that it will take at the very least until February or March before he gets the part. I contacted Whirlpool and they told me there is nothing they can do, just to work the tech and I said so Im supposed to go without a fridge for 3 months and was told sorry for the inconvenience. So Im thinking they sell me their product, take my money, then brush me off when I ask for help. That is piss poor way to do business.

We bought this Gold series refrigerator in 2013.. Less than a year we started having problems with rust on doors. It was so embarrassing people could see this. After that it was like one part after another, the motherboard, the ice on fridge, the ice maker. They changed the same part several times. Now April 2015 they say vapor cooling is not good and they have to put coolant and replace another kit.. Now we have to wait 1 week for that part. Meanwhile our food is going to go bad. Ive been calling for years about this lemon of a fridge. And the last time I spoke to somebody they say buy another fridge while youre waiting on the part to come out. Wow. This is literally driving my family insane.. I cant believe they just expect us to let this happen.. We paid about 2,500 for this lemon of a fridge.. I see so many complaints and youre telling me Whirlpool can get away with this.

It looks like I have the exact same problem as everyone else. Purchased an Energy Smart Whirlpool water heater at Lowe’s. Now I need a new controller. Hope they send me the non-catching fire type of controller.I am going to predict that the company will provide a response that says something like” “Hey, we really want to help you get your hot water back! Just contact us privately so we can discuss this without everyone being able to see what we tell you to do.” So far we are just out of hot water while we went through their diagnostics. They told me that this often happens and the best way to fix it is to let the hot water run in the shower for 20 minutes, then hold down the reset button on the controller for 5 seconds, and do that every time I experience this problem. I hope mine doesnt catch fire. Fire is bad.

Purchased over range microwave WMH31017AW-2 from Best Buy Mar. 12, 2015 and after installing it noticed code Door appeared and that there also was a dent on side. They replaced on Mar. 19 and we had the same Door code problem. Called Whirlpool and they sent out a Tucson repair tech and he ended up coming out at least six times changing 3 switches, 2 cams, 2 brackets, control board, and line filter. Still had problems and Whirlpool requested he call their tech and he did and they told him to make the same changes and he told them he already did all that and there still was a problem. Then Whirlpool told him to switch some wires on control board which did not solve anything. Then second thing they told him was to file and clean door brackets which also did not solve the problem. We called back to Whirlpool to tell them we did not want this defective microwave any longer as all these repair trips were not solving anything. They wouldnt give us a answer right then and said they would call us back 24 to 48 hrs and we are still waiting. We will never recommend Whirlpool to anyone nor ever buy from them again.

I purchased Whirlpool Duet HT front-load washing machine with model #GHW9400PLO. After a year of owning the product, failure codes continued to appear. I have followed the direction under the troubleshooting page which said to cancel and unplug the unit. After doing this over and over, I finally took the top lid off to inspect the problem. A ribbon cable was torn due to the top lid rubbing against the lid and the drum. I called Whirlpool and this was not covered (go figure). I then asked for the ribbon cable and they said they cannot just supply the ribbon cable and that I would have to buy the user interface which is $191 plus a $35 core fee because they re-bill them. What a rip off. A ribbon cable from a computer store would only cost $10.00. After that repair the Micro Machine control went out which is code F11. Code F11 is all over the web because this is a defective part that Whirlpool should do a recall on but why do that when they can charge $310 plus, get this another $35 core charge because they re-bill them? If you are not mechanically inclined with these parts plus labor you could have bought 2 washing machines. But who in the world would buy 2 pieces of junk right?Bottom line is: do your research and buy from a company that will stand behind their product because Whirlpool will not! They know by the number of parts they ship out that that part should be recalled.

The buttons that turns on the burners and oven turn on with a very light touch and start leaking gas and sometimes light. Its very dangerous and has done this since We got it new from Lowes. I wonder if there was a recall on this model or if lots of other customers have had the same trouble. Model #WFG524SLAS O Ser. # R20910336 We have had this stove about two years and My wife has kept after Me to report it , but I never realized how dangerous it really was until now. The previous stove We had you had to push in on the buttons and then turn them before they would light. Thank You.

We bought the Whirlpool Cabrio forcibly when our 20-year-old top load whirlpool finally gave out. The Cabrio sucks. It does not get anything clean, it ruins clothes due to low water which creates friction, clothes are left wrinkly, smelly, pilled with lint, stinky and unclean. Ive had it for a year and Ive given every cycle a chance. It simply does not do what it is supposed to.The HE washers are supposed to reduce water, but having to rewash everything several times with load times up to two hours not only increases the amount of water used but increases the amount of energy used. Our electric bill has gone up $30-55 a month on average. This doesnt even account for the fact that Im spending nearly 16 hours a week doing laundry for a household of five. Thats nearly triple the time I used to spend on laundry. From having to pretreat even the most minor stains to spending hours trying to get the wrinkles out, and having to remove pills of lint, to the fact that one wash cycle does not get the odors out nor the dirt out therefore multiple cycles are required. I honestly think I might spend less time if I hand wash everything, I certainly would get them clean and deodorized. UNFORTUNATELY Government regulations force the consumers to buy HE washers so our choices for clean deodorized clothes are non existent. If I had to do it again I would buy a used non-HE washer knowing it would run another 10 years and actually get my clothes clean.

Whirlpool W8RXEGMWQ01 leaks - It looks like the seal is not tight around the freezer box. They blamed it on my floor but I think its because the door sags. The door needs to be lifted about 1/2 to fit snugly into the freezer box opening. They came out three times but couldnt fix it, then they said it was my fault. Then I finally gave up.

So far this washing machine has been perfect. Its a top load not front load which I prefer. Im not a big fan of how it locks and I cant throw other stuff in once it started. Other than that Im very satisfied.

The machine was great and handled large amounts of laundry. It was very expensive but my wife was happy with its performance. A year and a half into owning it, the electrical code F70 comes up and it stopped working. When I checked online, I found it is a common problem. I contacted whirlpool customer service and they could not do anything. Spoke to the manager, Kiesha and she refused to help me even though I bought both the washer and dryer for a lot of money. Customer service is not a priority evidently. She denies that there is an on-going problem when both the internet and my service tech say differently.

Switched to bottom freezer and love the size. We all use and enjoy the filtered water. Whirlpool has proven to be a manufacturer I will always consider when making major appliance purchases for performance, service, and dependability.

I bought this top loading, low water machine 1.5 years ago, $500.00, did not buy extended warranty, expect major appliance to last at least 5 years. Motherboard is out, will not spin, will cost at least 200 to $300 to get it fixed! Selling on Craigslist for 50. So sad. Will never buy whirlpool again, waste of hard earned money!

I have been buying Whirlpool appliances most of my married life. Our most recent washing purchase is the worst machine I ever owned. I have ruined more clothes, rugs, sheets and towels, etc. than I ever have in my 45 years of doing my own laundry. In fact, I do not EVER remember a washing machine destroying any of my articles. I just pulled 2 almost new rugs out of the washer only to find they have been destroyed! I am pretty sure it is the extremely fast spin cycle that is destroying my items. I know it cant be the agitator because it doesnt move fast enough to even clean the clothes. And the stupid load sensor is absolutely worthless! It does not dispense enough water to even cover the clothes let alone clean them. Go back to the old machines that did their job without destroying anything and actually cleaned the clothes with an amount of water that I chose. I ABSOLUTELY HATE this machine.

Whirlpool Cabrio - What a nightmare. One year in… from the beginning the washer completes a cycle without attention. It gets stuck in a rinse cycle and eventually stops with an FF error display. Because of this it wastes HUGE quantities of water and takes far too long to actually wash clothes. It is so frustrating. We will buy a new Bosch and THROW this way. We cant even pass it on to our grandchildren.

I have called numerous times to complain about my new Cabrio washer. The first thing the employee did at the service center was to send me an owners manual, which I did not receive when I purchased the washer at Lowes. I followed all of the washing recommendations and still had problems with soap being left on the clothes. I called again and they said that perhaps there was something wrong with the washer and they were going to send a service technician out. I told her that he would probably not find anything wrong with it. I was just very unhappy with the product. She told me that we should check it out and not to worry. It was still under warranty and Whirlpool was going to take care of the service call. The technician told me that they have received many complaints about the machine, but there were no fixes available at this time. Yesterday, I received a bill from the service company for $129.00. I called the service company and told them that Whirlpool should be billed for this, not me. She told me that I had to call Whirlpool and if they wouldnt take care of it, I would have to. I then called Whirlpool, only to be told by the customer service rep that since they didnt find anything wrong with the machine, there was nothing that could be done. I asked to speak to someone else and she let me talk to her supervisor. She pretty much repeated what I was told by the first person and it is in the owners contract. I told her that I wanted to cancel the extended warranty that I just mailed in this week and she gave me another phone number to call. I cannot express how unhappy I am with your customer service department; the lack of compassion your company displays; and how I was told one thing and then charged a fee. It would seem that you have no eagles working for your company. I cant believe that a company as large as Whirlpool does not stand behind their products.

The main control panel on my Whirlpool Cabrio Washing Machine broke twice in the second year of ownership. I bought this in 2006. The part was replaced in March 2007 and then again in October 2007. Now, it is broken again and Whirlpool says too bad, they will not replace it again and will cost us $275 to fix it. People have posted about this problem all over the internet. How can they not help their customers and recall this washer part?

I also fell for the Consumer Reports BEST BUY of the Whirlpool Cabrio set. The dryer has had the heating element replaced 2 times already in 3 years. The washer reads all errors, and the repairman said today, “dont bother fixing, buy a new SPEEDQUEEN.” With the Board going out, and also the faulty bearings--will NEVER buy anything Whirlpool again.

Misinformation provided about their products - I ordered the Whirlpool 30 Drop-In Electric Range pictured in their literature with a gray oven door. When I had it installed, I thought it had a green film covering the oven door. It is not a film. It is the oven door color. It does not show that or talk about it in any of the literature. I would not have bought or paid to have this range installed. The green color does not go in my kitchen! I would sue them for misinformation if I had the money to spare! I will never buy another Whirlpool item.

I bought a Whirlpool Cambrio washer/dryer set last year. I hate them. They dont get the clothes clean, let alone wet! I couldnt believe it! I put my grandsons bib in the wash and it came out completely dry with the stuck on food still there. My husbands shirts still smell like the cologne he put on! I asked a Home Depot sales person about this and he says, yeah, we hear that a lot. !!!!!!! Im going back to a washer with an agitator so that I know my clothes are being cleaned. This whole water control business is insane. Whats the point if you have to wash the clothes several times to feel like they are marginally clean? The problem is that the industry has decreased the amount of models that still have an agitator so my selection is very slim. First and LAST time I ever buy Whirlpool.

I have a front load washer by Whirlpool and a motor stopped working on the drain. When I called them, they told me it would be $200.00 for the part. I dont understand why they dont stand behind there product. What can be done to make these people fix there stuff? This is there product, if they cant do it right, then find a new job!

The washing machine (WFS10055CD) was working fine until two months after the warranty period...It worked the night before, but in the morning, there were no lights. I emailed Whirlpool, but I received no reply. So, I called their number to ask if they would honor their faulty product JUST out of warranty...They wouldnt accept this...I live in an area with no service agents for them so I would also require freight costs of 1,000 km away...I have had an electrician examine the unit to find it may be the control panel/mother board...seems funny many issues with Whirlpool machines JUST out of warranty!!!

I am experiencing problems with keeping my pilot lit too. I checked the screen and this is not the issue. I have just returned from Lowes where I purchased the water heater and they informed me Whirlpool supplied kits for this issue and it was widespread. They mentioned a class action and went on to tell me they and all surrounding Lowes stores are out of the free kit and arent expecting anymore. Am I to feel lucky my water heater water didnt fail sooner only to feel unlucky all of the free repair kits are now gone? Lowes provided me with the Whirlpool phone number for help and they have just informed me it will cost me $35.44 plus shipping. I now see how widespread this problem is. This isnt right. I am very disappointed in the handling of this known problem! What is my next course of action?

Whirlpool Cabrio Platinum top loader 2014 model - This washer is an over engineered piece of junk. It takes forever to wash anything and it never gets anything clean. I wish I would of just bought the repair parts for my old machine which I had for twenty-three years.

I purchased this machine about a year ago and it is the biggest piece of garbage on the planet. The biggest problem is that it will not spin if the load is even slightly unbalanced. It does not clean the clothes. If you try to rebalance and spin the load, it adds more water and then gets stuck in a cycle where it drains and adds water forever. Do not buy one of these. I am finally surrendering and buying a different machine. A total waste of money.

I purchased a dishwasher from Menards. It was a top of the line Whirlpool Dishwasher. We ordered new cabinets for a kitchen upgrade and when the cabinets arrived they were damaged during Thanksgiving holiday. We purchased the dishwasher and it sat in our garage until the second set of cabinets arrived in mid January.Once the GC installed the new cabinets we noticed a small dent in the front of the stainless steel dishwasher. I notified Whirlpool and they took my model and serial number. The supervisor April said there is nothing that I can do. You passed the 30 day cosmetic warranty. I explained the issue to her and she didnt seem to care.The dishwasher sat in the garage for 7-8 weeks. This is not the consumers fault. This company could of sent a service mechanic out and replaced the front panel. But she chose to ready some meaningless policy to me. I will never buy a Whirlpool product again, and I will tell everyone about the poor and unprofessional service that Whirlpool offers.

I bought a HD Whirlpool in April 2011 and I hate the machine. It does not use enough water to wash clothes. I open the lid every wash and cannot believe Whirlpool can label this as a washing machine; it spits a little water now and then. I am demanding Lowes and Whirlpool to replace the washer. I have used two Kenmore washer for 45 years and I never had any problems. I use hot water to kill germs -- well there is not enough water to drown a fly. How can these manufacturers sell such product and then give the consumer such a hard time when they ask for help. Dark clothes have white residue stuff all over them. I have to hand-wash a lot of my clothes. I have never in 45 years had to do this. I am so mad that Whirlpool is taking everyone for suckers. Now I am sure that there are a lot of people who just never take the time to complain; too much trouble and just go buy another brand of machine. We consumers need to demand that manufacturers sell quality products.

I live in a new community, and this French Door refrigerator with bottom freezer was offered as an upgrade. Two of my neighbors and I have had the compressor break right after the refrigerator warranty expired. Luckily for us, the builder purchased and extended warranty, so we were all covered. I have NEVER had a compressor go out in ONE year.

I see that I am not the only one with the same pilot problem. I just purchased this new model that came out last summer. I bought my new water heater in September and just this past weekend, it messed up. I have not had it for 8 months. Whirlpool sent out a technician yesterday and he said the assembly is not good and the pilot would not light. Well they sent me a replacement part and they are coming out today to install it. The funny thing was that the technician said, Oh, these are hard to work with. We have a lot of problems with these models and they just came out last summer. Its the on that has the little box and you push the pilot button in and hold it until the red light comes on. Anyway, he said he didnt carry parts for that one, only the old ones which last longer. The ones that have the black round circle that looks like a thermostat. I said, Really? Well the reason I bought this water heater is because my last one that I bought 2 years ago kept having the same issue. Whirlpool sent me the assembly with the pilot and all 3 times and would never replace it. I got tired of it always messing up so after having it for 2 years, we just dumped it and went and bought this new model. Here we are 8 months since we bought it and the same thing is happening. I am so furious. I am pissed off that they dont recall these if they are defective. Why do they keep selling them if people have problems? My cousin called me a couple of months ago and asked if my husband could check her water heater and its the same type I had and it was doing the same thing. I will never buy another Whirlpool water heater again.

Whirlpool duet - I have had this machine for 4 years and have gone through as many door gaskets. They rip in no time causing damage to clothing and with the leaking damaging my wood floors. A definite do not buy!!!

Bought it May 2019 and till now 3 times it failed and every time it takes 3 weeks to fix. As someone mentioned the Technician never sent with the possible parts and it takes another week to get the part. Whirlpool refuses to replace the bad product. I will never recommend this product to anyone whom I know want to buy a washer.

Good microwave and will have 1100 watts Of use for TV dinners and warm up food. Do well and goes well. Please use this as well to warm up TV dinners smaller than most. Test them and see what is best. Go.

Cabrio Top Washer - Disappointed!! Its selling point was using less water but do they realize that you DO have to use a little water to clean clothes. Leaves residue on every load and where I have to use the extra rinse cycle and that still doesnt work. This product is going on eBay today! Never again Whirlpool.

Whirlpool Wash-And-Go washer and dryer - I purchased these new November 2016. Since week two, they have been a constant problem (i.e. not enough water to even get clothes wet, forget about clean; gulping soap from the dispenser; rubbing holes in clothing; putting rust on washed items). The dryer NEVER gets the clothes dry; no matter what setting they always come out damp, even after Ive put them through for two cycles.Three separate repairmen have come to work on the washer replacing sensors and the entire control board. It worked fine for two weeks, now its back to guzzling soap. (It is supposed to do up to 12 loads on one refill of detergent. I get two per refill. Ridiculous! Soap isnt cheap!) And, today it ruined brand new bathroom mats with rust all over them that I had to hand wash to try and remove without much success. At this point I would advise anyone looking for new appliances to try any other major brand and NOT Whirlpool. As soon as I can get the money, these are being junked and Im NEVER buying Whirlpool anything again!

We bought a new stove from Lowes in 2015 which is a Whirlpool with an AquaLift self-cleaning function. This function is totally useless. We have tried it several times and it does not remove the grime from the oven. We did not even have a very dirty oven. It doesnt clean the sides at all and the bottom is still dirty. I complained to the store and they told me the AquaLift function should be used every time the oven has been used. They recommend that I use a spray for the oven (which is porcelain) and scrub off the dirt. Give me back my old self-cleaning oven with the high heat. This new technology doesnt work.

I have had a lot of washing machines in my life and trusted that Whirlpool would have good products. Well, with this top-loader, I couldnt be more wrong! I have never had a machine that just sloshes clothes around - at best - leaving them just as dirty! Our water bill has greatly increased on top of that - I AM SO VERY DISAPPOINTED! Unfortunately I cant return the bad merchandise since I bought at a Scratch and Dent store (just a dent on the outside does not interfere with performance...).

Whirlpool Duet Sport W & D purchased from Costco in mid 2007 for $1600. Costco gives an additional one year warranty, totaling three years. Both have worked exceptionally, I must say -- clothes come much much cleaner, keep their color, and last much longer vs. top loaders (Im sure the water softener helps). Two separate techs just confirmed the circuit boards went on the washer ($450 with labor) to replace. Washer looks brand new, but now will be going to the curb.

The gas water heater that we purchased has been a headache. Pilot went out several times. When we contacted Customer service they informed us that we would have to have a new kit put on it. We ordered that and it worked a while and then we started having the same problem. Just recently we had to purchase another part and once again we have cold water. Fed up.

The agitation is too loud. I called Whirlpool customer service and said I wanted to return the washing machine because it was so noisy. Whirlpool customer service agreed that it was noisy and said they would send a technician out. Whirlpool customer service never told me the technician they were sending would cost me 25% of the washing machine cost. The technician said this is normal all machines are this loud. Now I am out the cost of the washing machine plus the cost of the technician and all I have is a very noisy washing machine. Im a real satisfied customer. The machine was bought 12 days ago.

My gas hot water heater failed. The pilot went out and could not be relit. The Whirlpool water heater has a 12 year warranty and we are in year 5. Sears said they could not send anyone to repair it because there was no service in our area. We live 30 minutes from Dallas/Ft. Worth, Texas. They offered to replace it even though I had a plumber on standby, ready to replace it. They said they could not let me do that if they had one in stock. After waiting a week for the delivery, they called at 4:45 pm to claim that the delivery truck would not start. They would not put it on another truck or help in any way. Then they said it would be another week before they could deliver it. All this time we are going without hot water, trying to cook, clean, take baths, do laundry etc. They had no sympathy and refused to provide compensation so I could proceed with installing a new water heater. I could have done this if I knew a check was in the mail but they refused to allow me to do this. This happened to me at another big box store years ago and they sent a check immediately. The customer support in the hot water heater dept at Sears was terrible. If they cant send someone to repair and they cant provide a replacement within a few days, it is only reasonable to offer payment so that the customer and move forward with repairs. I will never buy another appliance from Sears after this nightmare. On December 4th Im supposed to get the delayed hot water heater but if the truck doesnt start, who knows how long I will have to wait. I am reasonable and flexible but lack of hot water is something a customer should not have to wait two weeks to get resolved.

My 4-year old water heater has upper/lower sensor issues for the fourth time this year. The rep was supposed to send replacement parts to arrive today (day four with no hot water), but the wrong ones were shipped. A different rep called and offered to exchange the unit for a new one. The expense to me will be $350-$450 for the plumber to uninstall my unit, take it to Lowes and bring the new one back to install. The plumber suggested I take my $450 and just buy a new non-Whirlpool unit. He knew immediately that I had a Whirlpool hot water heater because its the most common repaired vendor. Whirlpool should be covering this expense for re-installation of their inferior product. Poor customer service. Day 4 with no hot water during the holidays with no solution in sight short of me purchasing a new hot water heater. Whirlpool finally got the right parts to me and I paid a plumber $190 to install. One week to the day later, my pilot light will not stay lit. No change in ventilation since it has been installed. I will say I have been dealing with their rep Chris on the phone who is extremely nice and I feel sorry for him. But we all have the exact same issue which is not being resolved.

The clock-timer went out. Appliance is only 1yr. 6mo. old. I CONSIDER THIS STILL A NEW APPLIANCE. This is the 2nd Whirlpool appliance, I bought a Whirlpool washer & dryer. The washer went after 2yrs. use. I bought a Kenmore used washer and it still works. I paid cash for the stove. It was bought at a Sears outlet in Cudahy, WI for $398.58 total with the one year warranty. I really have not gotten the use of the price. I guarantee you (this company) I will NEVER buy another Whirlpool appliance again. TOO BAD YOU COULD NOT RETURN A PARTIAL OF THIS MONEY TOO ME!!!!! I have a Sears repairman coming today 8-3-13 costing me $75.00 just to walk in the door.