Since there is only two people in this home, we decided to go for the smaller front-loading machine. This was purchased in 2012, still running. It does a clean wash, however common sense does remind people to not over-load a front load washer. If one follows directions, it gets the job done, and ones machine lasts longer without problems. Thanks.

I purchased a new gas water heater and had it installed by a plumber. It worked for 3 weeks then we lost hot water. I called the 877 number and got shoveled around to 3 or 4 people. I got hung up on twice then spent 45 minutes repeating all the instructions that are on the tank to relight the pilot light. They agreed to send a new valve. The first time, I never received the valve (after 10 days) and had to call back. The second time I called in, I spent 20 minutes trying to get another valve sent. The valve I, finally, received had plumbers dope on the back and clearly was previously used. Had the original plumber replace the faulty valve? And lo and behold, the second valve didnt work either. I have no idea why a gas water heater would have any issues after 3 weeks. I bought it brand new from Lowe’s. It is obvious that Whirlpool makes shoddy products. They have very poor customer service and care little for the customers’ time either in correcting the problem or being without hot water. I have spent over 2 hours with Whirlpool. Only to 3 weeks after the initial call, I still do not have hot water from a heater that is less than 2 months old! I called them on the issue of the second valve not working and they put me on hold (after 10 minutes the line went dead and I was disconnected) despite the fact I asked them not to do that!

Think twice before buying Whirlpool appliances. In our experience, quality and durability are a real issue. Here is our story. 5 years ago we built a winter vacation home. We bought brand new Whirlpool appliances from a reputable vendor at full price. Washer, dryer, double oven, and refrigerator. The washer arrived damaged. The damage was a button that was depressed and could not be released. This was brand new washer, never used, but Whirlpool insisted that we had caused the damage. It was only after the vendors tech got involved that Whirlpool relented and sent a repair tech.Next, the bottom oven door came apart in my hands after just days of use. I had to fight (yes fight and argue!) with Whirlpool customer service to send a repair tech. Finally after much arguing Whirlpool sent a tech and the oven door was repaired. The tech told us that this was a common defect! (Shame on you Whirlpool!) So why you might ask, why am I complaining? Well this is a vacation home. We are here 3 months a year (times 4 years = 1 year of very light use) and today the oven door came apart in my hands again. That makes twice in 12 months of light use. Frankly, this is shameful! I do not understand how this company gets away with it!I am disgusted with Whirlpool crap quality and crap customer service and I want everyone to know what they can expect when buying Whirlpool. I suggest you check all available reviews before placing your order for anything from Whirlpool. As for this new oven door repair? Ill report again after talking with Whirlpool but I expect to be told Sorry sucker, the warranty is over! Buyer beware!

I bought a Whirlpool Cabrio washing and dryer in 2011. I have replaced the lid on the washer 3 times. It comes apart in the back of the lid and it will not lock in place so it will perform. I have called the manufacturer several times. They have not been of help as to why this happened. Im upset. They have no suggestions. I have owned Whirlpool appliances for years and this is the 1st time this has happened with no resolution. I just want it fix or explain why its happening.

Bought this machine June 23, 2016. First use, I called Lowes where I purchased it to say there is something wrong as it makes a grinding noise. I was informed that is normal for agitatorless machines. I asked if he could hear the noise, and he said yes, thats it. So I disconnected thinking, Wow, who makes a machine in todays technology that is so loud you think something or someone is in serious pain?! Now am at the point where I want this design in pain out of my house! Going to Lowes today to try and talk rationally for a complete refund so I can purchase an LG or Samsung which is what I should have done originally.

We purchased a Whirlpool AccuBake oven in 2005. I think we used the self-cleaning feature about 3 times. The reason I mention this is it may be a possible cause to the frightening experience we had on August 15, 2012. My wife was cooking on the stove top when suddenly we heard loud electrical explosions coming from the back of the oven. We soon saw long arcing bolts of sparks shooting out the back, and my wife was terrified and didnt know what to do. I told her and my son to stay away from it. I ran to the circuit breaker box and turned off the breaker. We then looked in the back of the oven and it was on fire. I ran around looking for a fire extinguisher but my son managed to put the fire out. We called Whirlpool up and explained what had happened. They immediately sent someone out to look at it.I was very impressed at how fast they got someone out there. Whirlpool sent two technicians to look at the damage. After they were done inspecting, they told my wife that the problem is loose connections on Whirlpools side and not the feed and it had a damaged control board and that this is the fault of Whirlpool. He was very polite to us and apologized for any inconvenience. After a week had passed, no one called us, so my wife called and talked to some woman representative at Whirlpool. She told my wife that the report she got said that the oven had loose connection on the feed side from where we bought the oven and we should deal with them. My wife couldnt believe her ears and said, No, thats not what the technician told us, and the woman continued to talk and my wife said, Wait, slow down. The woman replied, Oh, am I going too fast for you? Well, I guess I have to talk slower then, in a sarcastic tone. My wife then called the technician who wrote the report and explained what the representative had told her, and his reply was, I cant believe she said that. I am not happy about this, that is not what I wrote in my report. Dont worry, I will personally take care of this. Again, the technician was civil and polite. After two days passed, my wife talked to the same woman again but this time she changed her story. She never apologized and said, It looks like in this report that the connections were loose to the control board. Since the oven is 7 years old and accounting for depreciation, Whirlpool is offering to you a total of $59. My wife said, Really, $59? How long is the life expectancy of these ovens? She told her, 10 years. My wife said, 10 years? Well, ours only lasted 7 and you are giving us $59 after we were almost killed and my home could have burnt down to the ground? She said, That is our offer.I called Whirlpool back and asked to talk with the safety supervisor and it was a woman again. Was it the same woman? It could have been the same woman my wife talked to, I was not sure. I asked her, When is it appropriate to issue a recall on a product? Our oven was defective at purchase. She said, You are the only complaint we had on this oven, so no recall is necessary. Yes, I said, but since it has been proven this is the fault of Whirlpool, I would expect at least a working oven from Whirlpool. I also told her the technician told my wife that Whirlpool should be bending over backwards for you, and she said, I apologize for the technicians remarks. I told her that I was dissatisfied and she will be hearing from me in the future. I did some looking on the internet and I found that KitchenAid which is made from Whirlpool had issues with a particular oven which was found that when the self-cleaning feature was used, it would heat up the control board, and since most people dont use the self-cleaning feature that often, it would take a very long time to develop. I thought that loose connections and heat are a bad recipe for disaster, and that quality control negligence and inferior components are to blame. Considering the past history and track record of class action lawsuits and appliance malfunctions such as the control board on their dishwashers, I believe it is all connected and related to my problem. Sorry but $59 isnt going to buy me a decent toaster oven, let alone a real oven. That oven should have lasted over 10 years and considering the possible damage and deaths that could have occurred, you would think that it would be in Whirlpools best interest to address this problem and bend over backwards for anyone who had the misfortune of purchasing this mickey-moused nightmare of a disaster-waiting-to-happen problem. Its not so much the money. What if a small child touches an oven as it conducts 220 volts then shocks into a childs heart to ground? What a ticking time bomb this oven is. As far as I am concerned, I dont want a dangerous oven like this in my home and Whirlpool needs to take some lessons in public relations.

My three month old $2,000 combination microwave-oven works a fine, its the just the details that stink. For example: There is no way to turn off the turntable. Yes! a crappy $40 microwave can do this, but not this one. Liquid got into the middle of the door window. You cant open it up to clean, they want to send a technician to clean that up so you can actually see through the window. How much? $150. How was it possible that Whirlpool did not adequately seal the glass? They dont care, and dont care about how it looks.

My Whirlpool dryer - Model# wgd49stbw, serial# ms2405113 went out on 1-29-16. Which I purchased from Lowes in August of 2015. Called the service company that I have my extended warranty with. They came out on 2-1-16. They did not have the part I needed in stock. It had to be ordered by the manufacturer. Sadly, I am still waiting and have been told it might come in on 3-29-16. Every time I call it gets pushed out another two weeks. This is really ridiculous. All the money I have spend at the laundromat I could have had a different source come out to fix. Which I still may do. I will never purchase another Whirlpool appliance again and certainly will NOT recommend. I am 65 years old and have a hard time dealing with the laundromat. If they get this part in by 3-29-16 it will have taken them two months. So sad.

Purchased Cabrio washer in June 2011; in May of 2014 repairman said tub seal was leaking and new bearings were needed at a cost of $400. The washer was still working, but sounded like a freight train, very loud. My trusted repairman said to purchase a replacement, this time with an agitator (the Cabrio has no agitator). 2 additional points : the Cabrio took 63 minutes to wash sheets; other loads required similar long cycles, something they dont mention with new efficient washers. Also, agitators will no longer be manufactured in washing machines within the next 2 years. : (

We bought a new stove from Lowes in 2015 which is a Whirlpool with an AquaLift self-cleaning function. This function is totally useless. We have tried it several times and it does not remove the grime from the oven. We did not even have a very dirty oven. It doesnt clean the sides at all and the bottom is still dirty. I complained to the store and they told me the AquaLift function should be used every time the oven has been used. They recommend that I use a spray for the oven (which is porcelain) and scrub off the dirt. Give me back my old self-cleaning oven with the high heat. This new technology doesnt work.

Nice looking, prices very fair for quality product. Options are always good. My mom used Whirlpool. That thing that goes in the middle of the old time washer is now gone. That thing would rip or stretch out clothing bras. Anything that was nice it would make it look horrible. Ive had my washer and dryer for 6 years and they still work like new. When shopping for a washer and dryer I do look for capacity, energy efficient and the brand. I prefer to stick to the old school brands just like my mother did. I must admit that I do love the fact that it is an HD high efficiency washer. The deal-breaker would be a low quality construction made a washer or dryer nobody needs to have problems with it. If youre spending that type of money you need to get good quality items.I love my washer and dryer. Theyre both and white color. Its a Whirlpool Cabrio with HD High efficient load energy saver and H2 wash system. The washer has a lid with a see-through glass which I love. My dryer is also a Whirlpool Cabrio steam with a resource saver that gives me a lot of different options as far as my clothing is concerned on how I need it dry.

I have a Whirlpool refrigerator from 2017 that is causing so many issues and finally completely broken after spending $500 on repairs. 4 months ago, refrigerator was making loud noise and freezer wasnt working. Then within a week the whole unit stopped working. Then, freezer got all frosty and the whole unit got shut off. 2 month later, the ice maker stopped working and nothing is working now. I called the Whirlpool and they offered me to purchase extended warranty for $530. I could not believe they wanted me to spend another $530 on this refrigerator after spending all this money on repairs and still useless. I refused to buy any more Whirlpool product that I used to love in the past. I am just so disappointed with the customer service as the supervisor from Whirlpool said that is why they offer extended warranty. $2000 refrigerator to last me 3 years???? Not doing this again.

Im guessing the company that makes Whirlpool appliances no longer make dependable appliances… bought home 2 yrs. ago. Bought Whirlpool over stove microwave and expensive side by side fridge. After 1 yr. microwave stopped heating. Now my fridge is no longer cooling. Have cleaned it underneath, did all a normal person would do. I replaced my microwave last year with a Maytag. I’m sure I will have to replace the fridge very soon. My stove is a Maytag. Dishwasher a Frigidaire... have had no problem. Just the Whirlpools… Will never buy another Whirlpool. Not just me, my niece bought a microwave. Her stopped heating after one year.

First F1 symbol on washer took 6 months to resolve. All we needed was new motherboard and couldnt mail it to us even though we could replace. It had to be an authorized person. Well we had one and they never put him in the system. Finally got that taken care of, 6 months of having to press pause and restart 5 times just to do one load. Arrrrrggggghhhh! Now water leaking out the bottom. Called again, on hold, then on hold again to be transferred to tech support. Yeah, right. No tech support. Talked to management, they could care less about us even though we have other products from them. Dont buy, they are lemons. We had ropes for 15 years and lasted through everything. Thanks Whirlpool, heres to losing a customer!!!!

Over-the-range microwave hood combo - It is not that it does not work, it just wont shut off! Close the door, it turns on. Touch the side, it turns on. I have walked in the kitchen and found it on! I am afraid it will turn on when I am not home and burn down my house! After reading the poor customer service received by others, I will just replace it.

My husband and I have been loyal Whirlpool consumers for over thirty years. When it came time to purchase a new refrigerator, we purchased the GC3SHAXVY00 model. It was quite expensive but we decided to splurge. This was the worst mistake. Let me also state that we have had the refrigerator now for maybe 5 years. Within the first 6 months, the door that is the central operating system for the appliance went out. The appliance was still under warranty at that time, so Whirlpool ordered a new door. The technician replaced the door and left. However, within 15 minutes of the new door being replaced, the entire refrigerator began to shut down, not just the freezer. Fortunately, we had the techs cell and we called him and he came back and put the old door on until he could order another new door. That made three doors in the first 6 months of us owning the appliance. Then, the ice maker started freezing up. We were told just to defrost the ice maker once a month, that this was a problem the company was experiencing with this 500-dollar refrigerator. Then, the water line started freezing so we would have to leave the freezer door open for about half an hour every week to get the line to thaw so that we could get the water to come out of the dispenser. Now, the ice maker has quit completely. Are we going to call a whirlpool tech? NO, what for?This refrigerator has been a true lemon from day one. I have three more Whirlpool appliances that have broken down within 6 weeks of purchasing them. It was time to replace our appliances so we thought we would support our local economy by purchasing Whirlpool. To say the least, that will never happen again. I will be replacing all my appliances with LG from this day forward.

Bought a stainless steel Whirlpool Gold bottom freezer in 2011. I purchased an extended warranty from Lowes (4) years, and still have another year left on it. Im constantly having to mop up puddles that form under the right front of the refrigerator. I read someone elses review with the same issue along with a sheet of ice forming in the bottom of the freezer and having to chip it out so the freezer drawer will close! Im calling the warranty company today.

I purchased a Whirlpool Cabrio just over a year ago. The washing machine does not clean clothes! While under warranty, a service tech came out to look at it. After hearing the problem, he replied that it was a common complaint and that he could not fix the machine because the problem was that it is so poorly made that it simply does not work. His recommendation was to come to terms with the loss of a thousand dollars as Whirlpool would not rectify the problem.Whirlpool really showed their true colors when they refused to cover the repair tech visit. Whirlpool supervisor Kitty explained to me that customer advice was not covered under warranty and that we would have to pay the bill. Highlights of her argument were that we should just rinse the clothes multiple times and they would eventually get clean. She also mentioned that if the machine really did not work as described, we should have complained sooner even though it was still under the one-year warranty. Whirlpool will sell you junk backed with horrible customer service. Beware!

I have the 4.3 cu. ft. washer. This washer worked OK, but the lid lock does fail after about one year if the washer is in an environment where moisture may be present.I noticed the lid lock not working all the time about two months before the warranty expired. If this happens, call the warranty department immediately. After checking the ground wire and resetting the washer power over and over again, the lid lock finally stopped working completely. Here is how to fix it:There are two screws on the back of the top portion of the washer. Unscrew them from the silver straps. The washer lid will now push forward and up and off. Prop it up with a stick.Unscrew the two screws on the lid lock and start taking it apart (after reading this entire review). Be careful not to lose any parts and be sure to know where everything goes for re-assembly. Take pictures if necessary. Take the lid lock completely apart including any small pieces.The plastic slide needs to be cleaned. It has a spring that may fall when you pull it apart.The metal contact points inside the lid lock mechanism need to be cleaned. Be extremely careful when pulling the red cover off of the housing assembly. Pull the four metal contact points completely out of the plastic assembly. Be real careful with the black plastic slide piece, the metal rocker switch and the switch actuating motor. Use a small file and rubbing alcohol to clean off any green or white corrosion. Make sure to check all contact points.Re-assemble and you will immediately notice the lock switch working better. Re-install onto the machine. Re-install the upper portion of the washer. Start your laundry. Repeat after one year or when the lid lock becomes faulty again. These points should have been made out of a less corrosive material. Poor craftsmanship. Would not recommend.

On 02/25/13 we purchased a Whirlpool Gold Series side by side (French door) refrigerator with an ice maker at the cost of $1,850.00. In April of 2014 the ice maker stopped working and the freezer at the bottom would not freeze food. Luckily for us it was still under warranty and was repaired. At the time of the repair, the repairman (associated with HHGregg) told us that the refrigerator should have been replaced since the cost of the repair was more than the fridge itself. Now July 20th, 2015, the same issue has surfaced. Again the ice maker will not work and the freezer wont freeze. I would not recommend this product or if you do pay the extended warranty.

Purchased Refrigerator (WhirlPool Refrigerator WRX988SIBM03) 16 months ago and noticed the drawer with glass that house the drawers had a crack on the right side. Couldnt believe it was cracked after such little use with just two adults living in the home. Removed it and noticed this was such shoddy design. There is a heavy metal bar in the back with a piece of flimsy plastic that attaches to the heavy metal bar with only a screw attaching the plastic to the metal.I made attempt to glue it since it was only cracked but then the plastic just started crumbling into pieces like a broken cookie. Truly there is something wrong with the quality of the product as well as the design of having this heavy metal bar attached to this flimsy plastic. The quality of this part only leads me to believe what is next with this refrigerator. I am sure there is more to come.I contacted Whirlpool to see if they would replace but of course this is at my cost. Ive had inner parts of refrigerators break over years of use and they get old and busted up over time but this is a new refrigerator and once I inspected the part, I was disappointed with myself for not removing these inner parts and inspecting prior to purchasing. I would have picked up on the poor quality right away. Taken by the outside of this unit and its beauty, and not truly looking at whether or not the shelf can hold a couple gallons of milk. I am here to tell you there is no way this would have withstood the test of time with only a gallon of milk sitting on this unit. Poor design, poor quality and metal attached to raw plastic as it is a disaster.

Most of my appliances are Whirlpool - dishwasher, refrigerator, clothed dryer and the Cabrio washer. The washer before this one, I had it for over 10 years and replaced it because of rust (thats another problem with Whirlpool - rust). Now the Cabrio hasnt got all kinds of problems - UL, F1 and jumping. The serviceman asked me for $450 for repair; it included a set of springs for the drum, a new electronic board and a 30-day warranty on parts and labor. Im better off buying a new one (I cant afford at this moment). My wife is scared of the darn thing and refuse to use it so now I have the job of washing and standing guard to make sure the washer doesnt leave the garage. Thank you, Whirlpool - and my refrigerator works fine all rusted.

Bought a Whirlpool Gas Range model WFG530S0ES0 in Nov 2015. Eleven months into owning it the oven wouldnt heat up. Turns out the motherboard and wiring harness needed replaced. Since it was within a year of purchase, parts and labor were covered. Dec 2018 the same darn thing happened. I called Whirlpool and they basically said, Tough luck, lady. Was I surprised, not in the least. I talked to a supervisor who said that they dont have a single complaint on their Gas Ranges. Did I believe that, not in the least. Whirlpool finally agreed to pay for the parts but not the labor. Whirlpool supervisor said that equipment failure occurs. I said theres a difference between reasonable equipment failure and unreasonable equipment failure. For a 3 year old Whirlpool gas range to failure twice, with the same problem, is unreasonable failure. The supervisor said in such a pleasant voice, Basically too bad for you. Oh and have a Merry Christmas.

Whirlpool hot water heater - The water coming from the faucets when it is hot is red. Therefore, I contacted Whirlpool and was informed that the anode has failed. The anode is not covered because, according to this company, it is not considered a working part. It baffles me that the anode is not a working part since it keeps the tank from rotting. I have only had the hot water tank for three years and this part has failed causing my hot water to be red. Since this company contradicts itself, I either have to live with red hot water (rust) or replace the part on my own. Unlike your company, Lowes has customer service. They apologized and will be paying for half of the expense for the part. Unfortunately, I still must pay for an employee to replace the part. This whole situation is absolutely ridiculous. I will never be purchasing another item from your company and in addition to that, I will tell everyone I know to avoid this company at all costs. You should strongly consider revising this policy before you lose all of your customers.

Ive owned this Whirlpool, bottom freezer refrigerator for two and a half years now. About a year ago I began to notice water on the floor in front of it. I had the ice maker hooked up, which I never used, so I disconnected that. The problem continued. I discovered that the bottom of the freezer compartment would fill with ice and once full the next dose of water would flood the surrounding floor. I have cleared the ice out, on a weekly basis, but have still had the water flow onto my floor. Its a daily thing now as Ive gotten tired of pulling the unit out and removing the ice build-up on a weekly basis. My replacement refrigerator will not likely be a Whirlpool of any model.

I bought a Whirlpool dishwasher in 2008 from Best Buy and purchased the extended warranty through Best Buy. First of all, my complaint is not with Best Buy (model # DU1145XTPBA). I have had nothing but trouble with the unit not filling with water, being noisy, and other problems. And then, my intelligence is insulted by these independent contractors, who are supposed to be appliance repair specialists. I found that far from the truth in most cases. They have a list of patented things that the consumer is doing wrong: not having a hot water heater next to the unit, using too much detergent, not loading it properly, and on and on. They must think we are idiots. I always would run the water from the sink till it got hot before filling. And I am a miser so I use less detergent than what the manufacturer or the detergent package says. Anyway to make a long tale short, it started leaking last week, so I assumed the door seal or some other such thing. But lo and behold, the door is rotted out at the bottom. The black finish has bubbled up and the metal is actually rotting away. I am from up north and it looks like my old Chevy 2 Nova rotted out. I called Whirlpool and spoke with several people and supposedly someone in management. They were, of course, sympathetic but offered no assistance or explanation. They offered to send a factory authorized repairman to replace the door at more than the cost of a new dishwasher. Are we that stupid? They never offered me a voucher for a discount on a new unit, which I am going to have to buy. I would not have accepted it anyway, as my last few experiences with Whirlpool have been dreadful. I will never buy another Whirlpool anything. The name used to stand for a quality product that you could depend on. But now it is like most things are offered to the consumer in this throw away society. And as long as we keep buying inferior products and only expecting them to last a few years, I am afraid that is what we will continue to get. Be vocal and let them know how you feel, even though they are probably yawning on the other side of the phone. They are without compassion and could not care any less. They are just looking for a paycheck and have probably heard a hundred complaints like mine, so its water off the proverbial ducks back. But when its their own job in jeopardy, perhaps they will start passing on these complaints to someone who will be willing to listen. Its a very bad experience and I will never buy Whirlpool again.

Not enough water to separate/agitate the clothes, so theyre as dirty coming out as going in. We bought an older washer that takes on more water and, presto....clean. We bought new Whirlpool for over $500.00 & sold it for $150.00.

Ive had my Whirlpool refrigerator for 6 months and since then Ive had it serviced 7 TIMES! Im a person who works so every time my fridge breaks down I have to take time off from work to wait around on a tech. I just called Whirlpool to see if they can switch my fridge out and they said NO! All they can offer me is a $50 check and have a different company come out and check my fridge. Im SO UPSET AND DISAPPOINTED! I remember when I was a little girl my parents and grandparents would talk about how good Whirlpool was and I was so excited when I moved into my first brand new house 6 months ago. It had all brand new Whirlpool appliances but now I think they are a piece of crap because to top it all off my microwave broke down 3 months after I moved in and I waited over a month from the time I reported it to have the tech come out and replace it. I dont recommend ANYONE buy this brand!

I purchased a Whirlpool Gold French door with the bottom freezer in October 2013. I had one repair done while it was still under the 1 year warranty, but by the time it was 18 months old, it began leaking refrigerant. I was told by the technician that the cost to repair it would be more than the value of the refrigerator, and the chances of the repair lasting more than 6 months were minimal. I had to buy a brand new refrigerator (not a whirlpool this time). I contacted Whirlpool customer service but they were non-sympathetic. Do Not Buy Whirlpool Products - Poor quality and high prices.

This is the worst washer ever. I purchased this washer (Whirlpool Cabrio Washer Top load) brand new in the box thinking it was a great price and a good deal. Worst choice ever. I have been so disappointed in this product. It is very noisy which is something I have learned to live with. It doesnt even get simple stains out. I have tried every load combination and change detergents and stain remover a couple of times. Most time I have to soak stains again and again and then wash several times and most times it simply doesnt clean clothes. It leaves detergent residue on dark clothes so of course I end up washing those again as well. The towels and sheets turn into mushrooms in the bottom of washer.

We purchased all our appliances from Flecks - there were to be rebates. Also never received them. We have had our oven for 2 years - when I set the oven on 350 it will go up to 400 degrees & the temperature on the front of the stove is 350 then it will drop down to as low as 250 & the temperature will still say its still 350. I called the company - did will do nothing. Will cost me as much to fix it as to get a new one. This a Whirlpool oven.

I bought a Whirlpool washing machine, model WTW4855HW, and was I ever shocked at how noisy it was. The wash cycle had a grinding noise that was just too much. After 2 loads I sent it back and didnt regret having to pay the restocking fee. I just couldnt believe that with all the technology we have today, that they couldnt build a quiet machine. Im an engineer so I know there are methods through gearing, belts, soundproofing, etc, to produce a quiet machine. Remember the dishwasher of days gone by. You couldnt watch TV with the dishwasher going. Nowadays, you can stand in the kitchen and have a nice conversation with it running. The technology exists. As a matter of a fact, my old Maytag that finally went bad after 10 years was fairly quiet. So, if you dont have your washing machine in the garage or basement room where you can close the door, dont buy this machine! Bruce in Portland

I would like for the public to be aware of an issue I have had with my Cabrio Whirlpool washer and the extended warranty service that Whirlpool sells to customers. My Cabrio washing machine is less than three years old and is an inferior product. The circuit board has gone out on my washer twice. Each time my washing machine breaks, it is out of service for three weeks and I have a family of four people. My washing machine broke down with a major circuit board failure for the second time in three years on January 23rd. I called the extended warranty department at Whirlpool and they sent an incompetent repairman to fix my washer. We are going into week 3 of listening to various stories on why it is taking three weeks to source getting a part overnighted to fix our washer. This man has ordered the wrong parts, says he cant come to us because of weather, cant get the parts, etc...I just got off of the phone with the warranty service after speaking with a supervisor and they tell me they cannot source another repairman and we still have to wait. My questions to corporate office at Whirlpool is how long do you have to wait to get a washer repaired and what type of product and extended warranty are you selling to the public? A very inferior washing machine and a very unhappy customer! I will never buy another Whirlpool appliance! BUYER BEWARE, THIS COMPANY HAS POOR CUSTOMER SERVICE! THIS IS MY SECOND GO-AROUND AND THE SECOND EXPERIENCE HAS BEEN IDENTICAL TO MY FIRST ONE - TERRIBLE!

I have Whirlpool gas range, model # WFG361LVS1. The igniter went out after only one and a half years of light use (4-5 times a week). I did not buy the extended warranty, so part is not covered. I only asked that they send me the part for free. I talked to a supervisor at Whirlpool (Dave). He said I should have bought the extended warranty. He said he could not help me. He was also very rude. I will never purchase another Whirlpool product.

The repair technician just left telling us that our Whirlpool Cabrio washing machine is fine. It is a little over a year old, makes LOUD noises as it runs, doesnt get the clothes clean and often doesnt even get them wet. The clothing sits above the water and comes out with pet hair, soap and dry spots. We use it the way the manual directs but it seems to be a totally defective machine. We sure wouldnt sell it to anyone nor give it away to some poor unsuspecting soul. Guess it needs to go to the dump. Shame on you Whirlpool for taking advantage of so many of us.

I exchanged my fancy front loader Cabrio washing machine for a top loader after having numerous issues: clothes werent getting clean, extended water cycle, and a leak. The original purchase was made at Lowes, where I elected to invest in the 3 yr extended warranty plan. After several visits from their sub-contractor, they allowed me to exchange the washer for a top loader Whirlpool Cabrio. At first the washer seemed to work, but after about 8 months I started having problems. The bearings went out and when the service company replaced it they forgot to screw top of the machine together. During my first load, I heard this terrible noise and discovered that the entire top of the machine had separated from the bottom by 2 inches. I frantically rushed to turn the washer off before my laundry room flooded. So, they were out again and screwed the machine back together but failed to retrieve the original screw that they removed from the washer during the first round. Well, the screw got lodged in-between the drum and interior, causing it to completely break the machine. Lowes agreed to exchange the washer for another top loader Cabrio, but my 3 year service contract would not cover the new washer. Not to my surprise, I immediately had issues with it and had to hire a repairman to assess the problem, who concluded that it was the bearings. He informed me that it would be about $700 to replace the bearings and cheaper to just buy a new machine. I called Whirlpool and explained to them about all my issues, now becoming almost comical. They arranged for an outside contractor to assess it. After confirming that the bearing were bad they replaced them. Another few months go by before problems occur, this time the washing machine stopped draining water and spinning. The service company was out another 4 times. They replaced things like the mother board and control panel. My last appointment was today, where the service guy said, There is only one error code. It is a stuck button. I said, Will you at least witness a full cycle so I can show you all my problems: clothes still dirty and stinky, items still wet after spin cycle, cycle taking 2 to 3 hours to run, horrible noises, and timer adding minutes to original cycle. He called Whirlpool because he genuinely felt sorry for my situation. They were of no help. He didnt stay to witness a cycle. Moral of story: if the error code doesnt detect a problem, the consumer will not be helped (this is something that consumers do not have access to). They will happily call a technician out to put a bandaid on an issue until your warranty runs out. I have had between 7 to 10 service calls out to my house, requiring me to take either an entire or 1/2 day off of work each time. If I added up all time lost at work, I could have easily purchased a top-of-the-line washer/dryer duo and been done with all this Whirlpool foolishness. Do yourself a favor, stay away from this product.

I purchased a washer/dryer around March of this year. I have nothing but trouble out of both of them. It doesnt matter what cycle the washer is on. Its like it has a mind of its own. It may wash; it may not. Sometimes, it takes over an hour for it to finish washing. The dryer sometimes dries on one cycle; the next time, it wont. Who would think a brand new appliance would do this. Every appliance in my kitchen is Whirlpool. They dont give me any problem, and I use them everyday.

My 1 1/2 yr old refrigerators cooling unit quit and I have been so disappointed with A and E appliance the only warranty service provider for Whirlpool in the state. From first call it took 10 days to service - then told no part - then 2 weeks for part to arrive and service done. 3 + weeks is unacceptable. Lowes tried to help - but said Whirlpool had to authorize a replacement in time for a 3 generation family reunion. Whirlpool was to call A and E to see if they could expedite and Whirlpool never called me back. I will try again on Monday - but my frustration with A and E and Whirlpool prompts me to write this negative review and I am not a negative person!

The beat goes on. My Cabrio washer is still down. After working for a mere 14 months, the control board died, and the machine would not spin out water. The repairman ordered a new one. Though the part arrived several days earlier than predicted, the repair service said they could not send anyone out, until our scheduled appointment. At last, today, the repairman arrived. I am ready to start whittling down the mountains of laundry we have stuffed in every closet. Some areas of my house are starting to smell like a locker room. It is not convenient for us to haul everything to a laundromat, or impose on a relative who lives nearby.The repairman was in the laundry room for at least 45 minutes, and then very apologetically tells us that the part is bad. It will not work at all. He has ordered a new one, and requested rush service, which I think they will ignore. I cant help but think these parts are manufactured somewhere outside the USA. Well, listen to this Whirlpool, I would rather pay $25 more for this part, and have your washing machine work. Dirty laundry might seem unimportant to you. It is not unimportant to us! If you cant do better than this, make something else. I am furious, and will spread this news to everyone I know, and I will report on this situation again.

I recently had the bake sensor go bad on my Control Panel of our Whirlpool Gold AccuBake Oven with microwave. Not a problem correct? WRONG! While the Whirlpool people were very professional in helping me (a shout out to them), the part I received was the wrong color. It was white; they called it a biscuit color. My oven is black. I have no idea what Whirlpool actually calls that color. Anyway, in my visit with them, I was informed the black control panel has been discontinued. Am I the only person that has a black control panel? This $280.00 part is now going to cost approximately $3,000.00 to replace the entire unit. Is there anyone that can direct me to where I can find a black replacement control panel? Way to take care of your customers Whirlpool. Solve this and I will give you a great shout out.

I purchased 5 Whirlpool appliances when I moved into a new home approximately 5 years ago. The selection buttons on the plastic panels on the front of 3 (dishwasher, washer and dryer) out of the 5 appliances has either broken completely through or are in the process of breaking through, leaving an ugly appearance on the front of the appliances. When inquiring if I could replace these panels, I was told that one (dishwasher) would cost me $100.00. I believe that the structure of these panels has been extremely poorly manufactured. Why would you put perforation around each button? It is obvious that they would push through. What can Whirlpool do for me?

I am writing this review because I have been working with Whirlpool regarding our Cabrio washer for the last 9 months. Ever since we got this washer, it leaves a stain on our clothes, especially dark cottons. It looks like a grease stain. The machine is still under warranty (though we did purchase the 5 year warranty), and we have had the technicians out 3 times to figure out the problem and fix it. They even had another company come out to do a second opinion. They are stating that the machine is functioning and therefore there is nothing they can do for me. All of the tests the technicians do come out normal, and therefore the machine is functioning, never mind that it still leaves stains on many of our clothes on a regular basis.I spoke with someone yesterday who was unable to help, stating there was nothing they could do. So, I asked for her superior, he stated that it is functioning properly, and that I should take the advice of one of the technicians who suggested I mix the soap with water beforehand because he is pretty certain it is soap residue (though he admitted I dont use too much when I showed him how much I use). Never mind the fact that if I have to do something more than the directions state, it isnt working properly, we have already done this and it doesnt stop the residue from happening. He still just continued to say that is what the technician said would help so that is what Im supposed to do.So, I asked for his manager. I am currently waiting for them to call me back. I am hoping they will do the right thing and just exchange it for a different washing machine, one that will work. I dont care what kind, whether its brand new or not, I just want a washing machine that actually cleans my clothes instead of leaving a residue on them.We do agree with the technician that said it was soap residue. We have a picture of a pile of dry soap in the dispenser (which the first technician told me to switch to) after the washer had finished its cycle. The washer doesnt have enough water mix with the soap to keep it from leaving a residue on the clothes. And, the residue doesnt just wash off if I wash it again (which shouldnt need to be done with a washer that is less than a year old anyway). It is a permanent stain unless we scrub it with Lestoil - an oil remover. But, that takes time and it needs to be washed twice to get the Lestoil scent out, which then gives it the chance to get new stains from the washer! Its an endless cycle. Needless to say, I have NOT been impressed with this washer.

I own a Cabrio Whirlpool washer. It already had several repairs and never got my wash clean. I complained to the company, no results. This washer is not even a year old. Why will they not stand behind their products?

My son purchased a Whirlpool Cabrio washing machine about two years ago and now it doesnt work. It was an almost $1,000 machine. You would expect a higher quality product. I always bought Whirlpool products because they were so dependable so I recommended my son to go with Whirlpool. Big mistake, the panel lights up but when you press the power button, nothing happens. I do not recommend this machine to anyone. Im wondering if anyone else that has purchased this has had the same trouble.

Are there negative numbers for ratings? Horrible, to say the least. Whirlpool is the parent name for KitchenAid ovens. I have an electric oven and the glass on the front door exploded! Whats worse is that I have been given the complete run-around! I have called, wrote, waited, and tried ordering through other companies--still no luck! How does Whirlpool get away with this? It seems that Whirlpool no longer makes the part!! Do they really expect consumers just to replace an oven every few years? Poorest customer satisfaction I have ever experienced! This should be a consumer fraud grand suit, as there are numerous complaints about the same issue with Whirlpool appliances! Stay away from this company by all means!

Whirlpool Refrigerator WRS526SIAH00. Well we have always had a lot of trust in Whirlpool appliances over the years. Just about everything we have is Whirlpool brand including water heater. We remodeled our kitchen and bought a new refrigerator in July 2013 (just for the color/look change). We have had nothing but problems from day one with the water/ice dispenser water may or may not work. Now (AUG 2015) the refrigerator side started freezing our food, milk and tea gallon jugs frozen solid. Went down a self fix list on an appliance parts website using our fridge symptoms, said it was probably the bimetal defrost thermostat. Replaced that part. It didnt fix it.So I did my own troubleshooting and found the cold air was continuing to push from freezer into fridge area, found this cheaply made plastic damper broke and stuck open. Now that part will cost another $50+. Whirlpool knows about these cheaply made parts they have put in these appliances. You cant even get to this part without taking things apart. This is a cheap manufacturers plastic part and Whirlpool knows it. Its not the consumers fault. It was a joke when we received an extended warranty offer from Whirlpool for just $208 per year or $626 for 5 years - I wouldnt spend another dime with Whirlpool. The price is high because they know how many parts are breaking on these units. You shouldnt have any repairs for 10 years on a refrigerator. We are stuck with a lot of Whirlpool products now, but we are done with this brand. Dont waste your money.

If you come across any problem or issue with washing machine, the service person will come and will have a typical vouge glance of the washing machine.. and the inner bearing problem etc. He will arrange a call with his boss.. who also tells the same thing… and collects Rs 450/- as visiting charges and goes. They ask you to bring the Washing machine to their showroom... on account of repair they do all nonsense and do replace some parts which are not at all required...*** Instead of going to the show room first, if you take second opinion from any local repair technician... you will be shocked to know that hardly it is very minimum problem like loose connection, biting of wires by rats or other problem which would just resolved in front of us..But certainly not the Big issue as these show room service mafia does.. I have encountered the same brought the same to the notice of the Care Manager Mr.**.. But no proper answer... One should understand that there is big mafia kind of activity just betraying the customers.. Please beware of the frauds of the Whirlpool Washing machine Servicing Team..

Initially felt the burners and oven took a LONG time to heat up, but just accepted it. After a year and a half, the motherboard died. The part alone was almost $400 and labor $100. The self clean does not work very well. Glass top is very hard to clean. It has a large oven space and looks nice, but would avoid Whirlpool at all costs following this experience.

We were at end of cooking salmon in CorningWare and the door blew open with amazing force!!! It is a double oven... Sounds like Whirlpool doesnt care so trust me we are not buying one ever again. :(

It was obviously designed by someone who has never had to clean a refrigerator. There are grooves in the door gaskets seemingly making their sole purpose to collect crumbs and mold with no obvious way to keep them clean (No, Q-tips dont do it). A layer of ice forms below the basket in the freezer (bottom freezer) which, when it melts, soaks the kitchen floor. Ice must be chipped out at least every two weeks to avoid flooding.

Today, after five years of washing items in the Whirlpool Cabrio top-loading, HE washer; I am taking the time to express just how poorly this machines operates. Clothes do not get clean, dish towels with dried food still have food on them, and towels get holes. If I wash items with sand after going to the beach, the dryer vent has to catch all of the sand that was never washed out. Rust has developed on the inside and drips down to ruin clothes. I would take back my previous washer with the agitator that was over twenty years old in a heartbeat. When we needed a new dryer, we went ahead and bought a matching washer. Painful decision!

Three days ago my washer Whirlpool Caballero has made a loud jet noise sound while spinning. While researching for a repair Ive noticed many complaints about this type of washer. Is there any resources that will help me get this repaired?

Very unreliable oven. Oven temperature never seems to get to the proper setting. Do not buy any Whirlpool appliance. They do not stand behind their product. A stove should be relatively simple but Whirlpool managed to produce a product that is complicated & unreliable.

I purchased a Whirlpool accubake oven in 2010. The repairman has been out to repair it 5 times. Thats right 5 times. It wont maintain the baking temperature. They have changed the mother board, the ignition switch, the harness, and the thermostat. Every time the repairman leaves it works and then I go to bake something and it doesnt. Once it reaches 350 degrees the oven cuts off. You can hear it trying to ignite but its like the fire doesnt catch. I have to shut it off, press bake and heat it up all over again. This is so annoying. Bad thing is I like the look of the oven but clearly this is a shotty product. I will never buy a Whirlpool again.

I bought a pair of Whirlpool front loading washing machine and dryer on May 23, 2011. The Duet Steam washer model is WFW9640XW, dryer is WED9470WW. Their high retail price was $1125 each. I did not pay this for them. I thought I got a great buy at Lowes for the price I paid, plus their 4-year extended warranty. Whirlpool used to be a very high-end appliance manufacturing company. Now, all they put out the back door is junk. I would advise not to buy Whirlpool front end anything. My washing machine started making noise about 2 weeks before I reported it to both Lowes and Whirlpool. The noise sounded like bearing not being lubricated, which that is what it ended up being.The noise got so loud that even with all my very expensive electronics (my home entertainment ctr equipment) I could not hear the TV which goes through an expensive Yamaha AV Receiver and those expensive Infinity speakers 7 channel system. The main bearing for the wash drum assembly was bad. After two emails and several phone calls to both Lowes and Whirlpool, Whirlpool was going to send the so-called re-engineered drum assembly. The style I have is 3 parts; the new one according to Whirlpool is one part, but if they put the same bearing in, youre going to end up with the same problem in another year. I live in a condo of just over 920 sq. ft. so really there is no room to repair them in my home, but that is what they are going to do. I will be getting the new drum assembly delivered to my condo and have the repair company doing this dirty job in the middle of my living room.Living in a condo, I have a small utility closet next to the kitchen where the furnace, hot water tank, and washer and dryer are. The closet needs to have some areas cut out with and installed two small hinged doors on each side, so if anything ever needs to be repaired or replaced, there would be a little bit more room to move items in or out. The problem getting the washer out is getting the dryer moved so you can disconnect the electrical plug, cold water hose for the steam, plus the vent hose. First, you have to get to the water valves which are very hard to reach. Because of the way cluster housing is made, they squeeze things into very small holes like the faucets and drain hose are located. I was asked by the repair person if I could help him lift these items out of the closet. I have had 7 fusion back operations and #7 left me in constant pain that I take a narcotic drug for pain daily. So, I called Whirlpool back and said the repair people were only going to send a tech. I was told that it is a two-man job: one tech and one helper. So Lowes needs to authorize two people since Whirlpool is sending the new drum assembly for free. I wish I could have gotten a new washing machine with the so-called re-engineered drum assembly. I am still probably going to have to squeeze between the bulkhead (wall) and the washer and dryer to disconnect everything since I am a small person. If I wasnt retired, I would have bought a different brand front loading washer and dryer, probably Bosch and took the loss on these piles of Junk. I love my country and do my very best even as hard as it is in this day and age to buy US. I served my country in the US Navy during the Vietnam War, just to see the civilians willfully buy Asian everything. So now, we have 4 Asian nations that own this country. I dont know why Whirlpool changed from a company that you could trust their products to a company that doesnt give a damn what they put out the back door. These companies still havent gotten the clue why folks buy goods from other countries. I think they need to open their eyes, but I guess with Whirlpool still being a company that is selling a very large number of appliances and making money off of us, suckers, they dont need to change. The only way they are going to change is if folks stop buying their junk.

After buying the best washer and dryer out there, I have found out that they are not. Thank you Whirlpool for taking my $2000 and giving me a junk. I know that you do not care one bit. Never again.

Dont buy this washing machine. All of my clothes are dingy and gray. I paid $1,751.96 for this set. What a big waste of money. Sometimes the clothes come out with dry spots and then some come out with lint like they have gone through the dryer and yet they are coming out of the wash. Often they are in a very tight large ball in the center of the machine. I distribute evenly around the machine and I dont overload. The brilliant engineer that decided the machine did not need a soak cycle is a person that has never washed clothes. Wish I would have taken pictures of some of the soil still left on my clothes.

I’ve had my washer and dryer for a long time and it has been okay and it’s time to update. It has had its up and down and I may get another just after a while they are outdated and better appliances come along. Smarter people are making smarter things.

We recently purchased a Whirlpool fridge, model WRT138FFDW and are very disappointed with a couple things. First of all, the refrigerator arrived with a broken shelf. Although it was no problem getting a replacement, we found out quickly that it is very hard to balance things on a wire shelf. Water bottles and the like fall over. It is completely our fault for not noticing when we purchased, but just giving you a heads up that it will be a pain for you. Secondly, the sound of the fridge is very loud. It truly is driving my wife crazy. When we called Whirlpool, we were told that if they come out to take a look and the part is not under warranty, we would be charged $129. It is a brand new refrigerator, how can some parts not be covered??!! On a positive note, it does keep things cold and the color white is nice. I will not be purchasing any more Whirlpool items for my home. Bad fridge and customer care!!

I got a new Whirlpool dishwasher and it is totally unacceptable. Its supposed to be energy efficient and the eco setting, which is supposed to be the most energy efficient, takes 3 1/2 hours and does not do a good job, doesnt dry the dishes. Ive tried all the settings and some take over 4 hours. I have talked to someone at Whirlpool twice and they say thats the way it works. How can anyone put out a product that doesnt work and get away with it? I had my last Whirlpool for over 12 years and it took not even an hour and did a wonderful job.

Thank God for this website and Frank of Dover (postings on Feb. 11, 2013 and Jan. 7, 2011). We just had exactly the same horrid experience with the lid on our Whirlpool Cabrio Washer WTW7800XW. Just as with Frank, our home warranty provider first accused us of abusing the machine. I merely printed out Franks comments and description, whereupon the home warranty provider reluctantly agreed to replace the lid. We also bought an extra lid and are keeping it in our attic for the next failure. Do not purchase this washer!

I purchased a washer model# wtw560xw, serial# c04830040 on 1/11/11. This product has never properly washed clothes. I have had 3 technicians come out and press buttons on my machine. The most recent supervisor I spoke w is Niki id# **. She said that the machine washes but is not supposed to clean clothes. I am getting blown off and aggravated. I filed a complaint with BBB that went nowhere. Someone from the corporate office named Amanda called me and told me she would look into it and a week and a half later, not return my call. I had to track her down for her to tell me she can do nothing! The hold times are always extended. I have a pile of ruined clothes and a pile that I am attempting to hand wash. I am beyond frustrated and need a machine that will wash my clothes. I am not in the 1800s. I should not be hand washing when I paid hundreds of dollars for this useless machine. I am ready to file a class action suit. I can be contacted at ** **.

Its just OK, the electric cook top heats up slowly, but once heated works OK. Oven is just average! Glass cooktop stains easily and shows some discoloration in places. The glass on the oven door is also discolored on the inside and not cleanable!

When I purchased my Whirlpool Cabrio washer and dry, I was told by the sales associate that this was the top of the line. I paid a higher price for what I thought was quality only to find out that this washing machine (WTW6600SW2) Serial number CU2973872 is in fact poor quality, made of components that are cheap, unreliable and made to last only as long as the initial warranty. Prior to buying Whirlpool, I owned Kenmore and had a washer and dry that raised four kids, now I own a Top of the line Cabrio that cant wash the clothes of two adults. I think it is funny that two days after the washer started sounding like a jet plane taking off during the spin cycle, I received your sign up for an extended warranty letter. Then I take the washer apart to locate the trouble and find it is a single bearing on the top of the drive shaft, but can I buy the bearing and replace it? No, I have to buy the entire outer tub and drive shaft. So a $10.00 bearing will now cost me $200.00. I am sure that helps your profit margins considering all you have to do is a search for Cabrio problems to find 350,000 hits, or to ask a professional technician and receive the reply that they are replacing 2-3 of these tub and drive shafts per week. I would recommend that Whirlpool tell its shareholders that you have compromised customer satisfaction to line their pockets with profits. If that was your intent then you have succeeded, however you need to also tell them to sell their shares now as you will have no return customers. Most corporations have core values that deal with safety first and then always followed by quality. I can say with confidence that your quality can be nowhere near the top five with this many problems with your top of the line product.

Refrigerator, less than one year old, quit working and destroyed several hundreds of dollars worth of food. Whirlpool warranty division was notified and a service technician was scheduled to arrive yesterday, a week after the warranty division was notified. Yesterday, no one arrived. Today the warranty division was again notified and we were advised the service technician was never scheduled and they do not know why this happened. Here we sit again for another four days awaiting a service technician.I am disgusted with the failures of Whirlpool and their warranty division. Again, in less than a year Ive paid nearly three thousand dollars for a refrigerator and it fails, destroying hundreds of dollars of food. This has been a complete struggle trying to maintain food in a household both children. I expected a long time manufacturer to provide better warranty, service, and not just tell me they are not sure why. I would hope that no one ever buys their products again, God knows I will not!

We purchased a Whirlpool Cabrio Washer approximately 4 years ago thinking we were purchasing a top-of-the-line washer. The first year went great. I was very impressed with how it washed. My clothes came out cleaner than ever before; I loved it. But shortly after the warranty expired, one of the water pumps began leaking out all over the floor. We found out that a coin had passed through the barrel down into the pump and caused the plastic pump to crack with the high speed spin. We replaced that pump at a cost of over $100. We shopped around to find the part as reasonable as possible. The machine worked fine for about another 10 months, then it happened again. The new pump began spitting out water all over the floor. So again, we found another coin, another crack in the pump and again replaced it, another $100+. Finally, a third time, it was the same thing; the pump cracked due to a coin. This time, it was the pump on the opposite side, but still, water was all over the floor. This time, we ordered the part through Whirlpool and complained about this happening for a third time. My husband asked them about the Lemon Law and he was told that he would have had to purchase all of the pumps through Whirlpool. What does that have to do with it? We bought the pumps where we could afford them! The washer cost about $700 to begin with, and within 4 years, weve spent approx. $400 more? Thats not the end of it though. Now we are hearing loud noises and there is water all over the floor again every time you wash. This time, its not the pumps though. It appears that it has something to do with the bearings and maybe a seal somewhere around the barrel itself. But you can hear something knocking around - it sounds almost like a nut. We are going to call a local repairman to come and look at it tomorrow. This is just ridiculous. I feel like weve been completely duped over this purchase. The salesman talked this up like it was the cream of the crop and weve had nothing but problems. My last washing machine was a Kenmore and it lasted nearly 15 years and not once did I have to call a repairman or buy parts for it! Guess what Im going to buy again? If Whirlpool would just acknowledge these problems and fix them for people, it might renew faith in your company. I know I dont know the inner workings of a washing machine, but it seems to me that a screen prior to the pumps to keep coins from entering the pumps wouldve been a very cheap fix to a huge problem. I also own the Cabrio dryer and have hated it since the day I got it. It never dry things with one cycle. I always have to run it a second time. Knock on wood though, I have never had any breakdowns with that. I can guarantee my next buy will not be Whirlpool, nor will I pick expensive models again. I bought the cheap stuff years ago and it lasted forever! Im very nervous because I bought a Whirlpool fridge last year and I am praying I have no problems with that!

I bought Whirlpool gas water heater on July 2009. It keeps going out. It is not working. I found out you cant even get parts for fixing it. The dealers told me its junk. I was told to buy a new one. Then, I found out its been in class action lawsuit. How did I get to buy it after it was recalled? I dont know what to do.

I went to Lowes and purchased a new kitchen full of appliances. The refrigerator is the bottom freezer, French door with water inside. The problem is the freezer stays cold and the refrigerator does not. The vent from the freezer gets frozen, and the refrigerator part stops working. Its only 3 years old . We were told it would cost 700 bucks to fix it, and that a power surge could make it happen again. The capitol of power surges, Florida, what a complete waste of money. I spent my life in retail selling their products. Im so sorry to all who have purchased from me... Its really a terrible product. I would give you all a refund if I could. This really hurts...

My 50 Gallon water heater is still under warranty, model #051718153. The water heater shuts down after a few minutes. Theres a sound of a leak inside the tank. They would not replace the tank; theyd only replace parts. We have already replaced the outer control box and the double burner, and theres nothing else to replace except the tank, which they refuse to do so. If I had called them and said theres water coming out from the heater, theyd have agreed to send me a new tank, but honesty doesnt work.

I just purchased a new stove after using my old one for 15 years with the same great quality. Its the brand I will purchase when I have my retirement home built next year and leave my new one in the home for my son so he wont have to buy one for 15/20 years.

I bought a new Whirlpool refrigerator (model GX5SHDXV01) about 5 years ago. This company used to have a great reputation, but times have changed. At 2 years, the defroster went out and needed to be replaced. I thought at the time it was just one of those flukes, since Whirlpool makes such good products. But, here I am again with the defroster out at just over 5 years old. I contacted customer support and was told that they would not stand behind their product. Twice in 5 years is ridiculous! Poor marks for reliability.

I am posting to help anyone else avoid the purchase of this machine! The lid has cracked and now warped into a position where it wont stay down. Obviously a washer will not work without being in the locked position, so we have to put several heavy things on top of it just to run a load of laundry. This is not what we expect out of a washer that we paid $900 for only two years ago!!!! We contacted Whirlpool and they offered to fix it for $350. REALLY??? I SHOULD NOT have to pour money into a washer this expensive after two years!!!! I am so disappointed in Whirlpool, this was the entire reason we purchased Whirlpool products, to avoid stress of broken appliances. We wanted reliability for our busy family and instead we bought into more stress.

I owned a Kenmore washer for approx. 20 yrs that endured 6 kids for most of that time period. When time came for a new one, I had to have the latest model, and settled on a Maytag Bravos approx 3 yrs ago. This was a huge mistake - I paid between 600-800 for this machine, and it is a piece of garbage. The repairmen here yesterday explained to me that Maytag and Whirlpool are now the same company, and also that all these machines are now made overseas because of cheap labor. In a nutshell, I was given an estimate of at least 300 to repair this piece of crap - he explained that they are only made to last a few yrs -where is the justice in this situation? I really dont get how these big companies get away with selling crap, knowing all the while that the consumer is getting screwed - yet people continue to buy them..

I bought a Whirlpool gold side by side with freezer on bottom and the ice maker in refrigerator part in March of 2013. Ice maker dropped ice one time. In 5 days Lowes brought me a new one out and swapped it because it was in their 7 day policy. Ok this one worked good for about 2 months. Ice maker quit again. Service came out, changed out some parts that didnt work. 2 months roll by the new parts they ordered came in. Service came out again, put those parts in. Worked for about 3 weeks then stopped again. 3 times new service guy comes out and replaces some more parts and he had the wrong motherboard so guess what, had to order. It took 4 weeks to get it here. They came, put it on. It worked for around 2 months. I asked Whirlpool for my money back, they said that that was not a going to happen. I asked for another refrig, they said they would have to have 3 more service calls on the frig before they could do that. Well I have got a $3000 dollar refrigerator that has no working ice maker and Im sick and tired of the runaround. Whirlpool sucks. I will never buy another thing with their name on it. Matter fact I wouldnt take it if you give it to me. (Why) you ask, because in a short time Im going to have to haul it off for junk and its not going to bring nowhere near what I gave for it at the scrap yard.

I own an FG flame lock water heater and have been having the same problems with the pilot light not staying lit. This is very frustrating! I have searched many websites and am not able to find a replacement thermocouple for the stupid thing. Also, I have been told that the parts for the type of water heater that I own is no longer available. I tried to call the Whirlpool number a handful of times, but unfortunately, I was on hold the entire time and could not speak with a rep. I guess that explains all of the complaints I have read on here. I would like to be contacted or have help from someone regarding this matter! I would not recommend this product to anyone and I am very dissatisfied!

My washing machine stopped working. I called customer service and got through to Tonya, in the Benton Harbor, Michigan call center. She was wonderful! Living is SW Florida, were having a difficult time right now dealing with the aftermath of Irma. Tonya is an angel during this trying time! Thank you Whirlpool for have exceptional customer service reps! Ill continue to purchase your products as a result.

Have had no problems and we have both washer and dryer Duet and love them. We need to make sure we keep the washer door slightly open to avoid mold. The dryer lint filter is a little difficult to vacuum out.

Cabrio - In Dec 2013: Ran the Clean washer cycle and it would not cut off. I had to shut off manually. Called the company and they sent a technician, who said he fixed it and that everything was good. Fast forward to Feb 2015: Tried cleaning the washer again. When I left the house there were 10 minutes left in the cycle. When I arrived home 7 hrs later, the washer was still running and my hot water heater had cut off. I had to reset via the circuit breaker. This will be my last Whirlpool appliance for a long while.

Whirlpool Cabrio Platinum Option - Very stylish. Well built - very solid and heavy constructions. Full features from quick wash to sanitary wash, very energy efficient, steam setting on dryer for touch-ups. Quick loads, etc. We were looking for a washer and dryer set that would accommodate large quilts and blankets and still have the flexibility to handle small and delicate loads, and be energy efficient. The Whirlpool Cabrio Platinum Option is solidly built and very sturdy. It handles small and large loads and is very energy efficient. Both the washer and dryer handle sheets and pillowcases without a problem. Wed recommend them to anyone.

We replaced our 20+ year old washer and dryer with a Cabrio set. I read the instruction booklet twice to make certain I did everything correctly. Ive washed two loads. Both times, the clothes were in a ball at the bottom of the washer. Everything was horribly wrinkled. DO NOT BUY this WASHING MACHINE UNLESS YOU want your CLOTHES to COME OUT in a WRINKLED BALL.

Cabrio fabric washer and dryer sucks. I gave almost $500 for a piece of **. Doesnt get the clothes clean. Hell most of them dont even get wet. Its junk. Wouldnt have another one. Lowes junk and the dryer aint know better. Its always flashing check lint even when its clean and you have to ** with it just to get it to start.

Whirlpool Clothes Washer Model WTW4930XW1 - We have experienced tub overfilling on (2) separate occasions with this washer model in a period of time of less than (2) years. Through extended warranty service purchased, a technician came out the first time; declared nothing explainable to cause the malfunction, re-calibrated the control panel, and off he went. This second event occurred much the same as the first; happened to walk in to notice water on laundry room floor and witnessed overflow out the lid on top. We have carefully washed additional loads after this second event without a similar malfunction. From my online research, this sure sounds like a faulty pressure switch not sensing high water level in the tub. Any other thoughts?

Updated on 07/09/2020: This fridge freezes produce. A part was replace to solve this problem but it has never worked properly. After several attempts to correct temperature fluctuation, Whirlpool decided it was working within their specs and advised us to set the temp higher to solve the problem. So we are doing that but now if the temp is too high the ice is watery and falls out of the ice compartment when we have finished using the ice dispenser. So we lower the temp and it again freezes the produce. Do NOT buy a Whirlpool!!! If you have any questions look at whirlfreezefood story...Original Review: Purchased September 2019. Worked for a couple weeks and then Freezes the produce. I have put it in the center drawer and in the main fridge still freezes. Go to ** for full story and recording of a message Whirlpool left me.

Late on the evening of Monday, January 27, 2014, after springing a leak in my 8-year-old water heater, I purchased a new Whirlpool model N50T61 replacement from Lowes. Installation went smoothly and the unit lit off fine the first time. It heated the initial tank of water rather quickly, but the next morning, I noticed the status light on the control unit was not blinking, which indicated the pilot light had gone out. I relit the pilot light, the water heater fired off and appeared to be working properly. 12 hours later, the status light was out again. I relit the pilot, but within 20 minutes, it went out again.On Wednesday, the 29th, I called Whirlpool customer service and explained to the representative what had been happening. He stated that since the status light was not blinking a code, the problem was either an air supply or venting problem, and he couldnt help me. I relit the water heater again and performed the match smoke test described in the owners manual on the vent connection. It did exactly what the manual said it should do, so I assumed that was not the problem. However, while performing this test, the water heater went out again. This time, being right there when it shut off, I saw the status light blink twice about 5 or 6 times before it quit blinking all together. The two blink error code indicated low millivolt signal from thermopile.I called customer service again and explained to the representative what the first person had told me and also told him the results of my test and that this time, I had observed the two blink error code. He asked if I had a multimeter (which I do), so he had me disconnect the wires for the thermopile, connect the meter to the wires, light the pilot and read the voltage. My meter is an old analog unit, and not capable of reading millivolts (which is what the thermopile output is), and I informed the rep of this, but he had me do it anyway. As I suspected, I saw absolutely no reading on the meter. The service rep stated that he believed the error code and decided to send me a new thermopile assembly. However, their shipping department was closed for the day and I should not expect to see the new part until Friday. This was unacceptable, but he stated that this was the only option available to me.After thinking about this situation for a while, I again called Whirlpool customer service and told the representative that I was not satisfied with the solution previously presented to me and that I wanted a return authorization to take the water heater back to Lowes for replacement. The rep stated he couldnt do that, but said that there were a couple other things I could try. He attempted to explain these procedures to me, but wasnt able to do so clearly. He stated he would email the instructions to me. As of this writing, I still have not received the instructions.In the meantime, I did some internet research and found that Whirlpool water heaters have numerous chronic problems, including the issues I was experiencing. I decided this was not a product I cared to own. I called the Lowes store where I purchased the water heater and spoke with the manager. I explained the entire sequence of events to him, and he told me to bring the water heater back for a full refund. Since my local Lowes store only sells the Whirlpool brand, I took the money and purchased a different brand of water heater from another home improvement store. Needless to say, it will be a cold day in hell before I ever purchase another Whirlpool product.

Replaced the “brain” twice. No hot water for 2-4 days each time, waiting for part to arrive. Now I have to replace the nylon drain valve because it won’t shut off. Gonna use brass replacement. Fortunately I have it drain to a sump pump so house isn’t flooding. Don’t buy Whirlpool water heater from Lowe’s unless you enjoy this kind of thing. Consolation: the folks at the help line always answer the phone and are knowledgeable. And they’ve heard these same complaints over and over. One guy even said to buy AO Smith as they are made in Tennessee instead of China.

We purchased this washer on 2008-04-27. It ran okay until a few months ago when it began making strange intermittent noises. This is now happening more and more often. I reviewed a lot of websites and see that this is a common occurrence for Whirlpool Cabrio washers, and Whirlpool will not stand behind it and make it right. Im going to write them a letter mirroring what Im saying here, and remind them that other appliances in my house are coming due for replacements or upgrades. Whirlpool and its affiliates will not be part of those upgrades going forward. I have no patience or tolerance for expensive **, which is what they put out here. I will have to purchase a replacement washer since this seems to have two major areas of failure, both extremely expensive to repair. I might check out Roper and see what they have--its apparently very well rated by the folks that work on these things.

We purchased this washer and dryer new in 2011. Have repaired door to washer twice. New doors total cost $500.00 each time. Now it is cracked yet again and the dryer door has to be adjusted. The temp does not work right. Have to do minimum of 2 cycles for drying. Very unhappy. We may as well buy a new set of another make. Tired of the expensive repairs.

The one star is just for the oven, which is still working. I have a microwave and oven combo and the microwave is used occasionally for popcorn or to reheat the food. Soon, it stopped warming up. I called the service, which is one of the worse experiences I ever had, and was fixed.Soon after, the same part got broken. But I ran out of the warranty. I bought the extended warranty and all the problems started. I was told by one of the Whirlpool representatives that before my warranty will become effective, I have to fix my microwave on my own expense. But in the Whirlpool terms and conditions, it stated clearly that they do not cover if the repairs are made by anyone other than a participating service provider or those recommended.I decided to cancel the warranty after paying the first rate but before it become effective. I fixed the microwave on my own expense with a different repair service, since the one that was recommended by Whirlpool charged almost a half of the amount as I paid for the whole unit.Within the month, the some part got broken again. I called Whirlpool to find out if this is a manufacture problem and is listed as recall. However, Whirlpool did not respond.

The washer began to start making noises as if coins were in it or plastic breaking every time I wash. Also, it does not wring clothes out good and clean well. I have Whirlpool Cabrio.

We are having our second major issue with our Whirlpool Refrigerator Model WRF757SDEM but unfortunately at 1-1/2 years old, it is out of warranty. Although the certified repairman says that the issue with the thermostat is a known issue and the company created a whole new part to fix the problem, there is no recall. Customer service was lousy. They deny any know issue (again, they created a new part they will sell us to fix the issue) and they mocked us for not buying their warranty after having the first problems with their fridge. This new problem will cost over $300 to fix. Why is there no recall if they knew about the issue?

Ive always had good luck with Whirlpool. They last longer & dont have as many repairs. Ive had to have a lot of repairs with Maytag washers. The dryers didnt give any trouble. I recommend Whirlpool.

This microwave had been the best I have used for several reasons. One is the modern design that goes with our kitchen. Two: it heats the food very quietly and produced an even temperature through out the food. Three; The inside of the microwave is easy to clean out.

Whirlpool Cabrio - I have had the same experience as those others that have written reviews - over $1,600.00 (on sale) - approximately 3 years old and I was just informed by a service repairman that water has leaked from the center of the tub into the motor and it is trashed. I went to the Whirlpool website to chat with a representative and they are sorry but unfortunately, we cannot guarantee there will be no repairs or parts replacements needed as components do deteriorate or fail on occasion due to factors over which we have no control - they went on to say that since the washer is approximately 3 years old there would be no assistance that we would be able to provide toward repairs. I agree that a class action suit should be considered since Whirlpool is taking no responsibility for a machine that costs too much - makes your clothes smell and lasts for such a short time. Highway robbery!! The dryer is no better but at least it is still working (today anyway!).

We bought this refrigerator because it was the only panel ready one we could find. When it was delivered the two doors did not line up. There was an adjustment that could be made but it required that Whirlpool had to do it. We made an appointment and was told it would cost $179 for the adjustment!! This for a refrigerator we had just purchased for several thousand dollars. The service person showed up and after working on the refrigerator he could not balance the doors. He blamed it on uneven floor, misaligned cabinets – anything he could say to shift the blame from Whirlpool. We called and complained again. They sent out another service person. He was just as useless as the first one. Told us to even out the doors we would need to shim the refrigerator which he would not do. Complained to Whirlpool with no results. Finally hired someone not affiliated with Whirlpool who was able to get the doors to be aligned. Never Never buy a Whirlpool/Kitchen Aid Appliance. They do not stand behind their products and do not care about their customers!!

We have a Whirlpool range that was produced for Kenmore (Sears brand). It’s a glass top with electronic controls. Over the 13 years we have had this range we’ve had to replace the controls 3 times at a cost of over $300 each time. Each time we were under severe lightning storms and got hit with a surge. It would burn out the Control board. We finally got a whole house surge suppressor since a large device is required for 240 volt appliances. Also the glass top has gotten scored over the years. We would not recommend this oven and will likely replace it with an industrial gas stove with manual controls when this one dies or gets too expensive to repair.

They will not honor the extended warranty on their fridge which Ive had for less than three years which will not defrost making me lose thousands in spoiled food. Extended warranties are contracts and this company should be penalized and shut down for fraud.

I am very upset about this Washing Machine and Dryer. I did my research in 2012 and found good reviews on drum size, water usage, bells and whistles. I purchased the set in Feb of 2013 (its on Jan of 2017). NOT EVEN 3 years later, I write to say that my washing Machine is ready for replacement! I paid 989.00 for each and last year the Spring on the Glass Top was worn away, I am told because bleach was splashing up in the spring area. Cost to fix with a local repairman... $235.00. Now I noticed a small amount of water on the floor, move the washer and there is a LARGE amount of water Stain and my cycles keep popping up UL. Two separate repairmen (because I didnt believe my trusted first one) tell me the cost for the shot bearings and seals will cost almost as much as a new washer! I am a family of 3. I have a daycare so do a few extra loads, but am not using this any more than average to low use. Not to mention that on top of all of this the computer appears to be shorting out and to order a new panel the repairman places that at an EXTRA 300.00. SO UPSET! The dryer dries very nicely and is quiet however, the motor went out 6 months ago and we replaced that, not wanting to but better fix than scrapping it only 3 years into a product expected to last well over 10! The little clip on the door to lock it is also loose and hardly locks now. The repairman is having trouble even finding the small part. Young Couple Expecting to have a brand new 1900.00 washer dryer set last a long time only to be out of warranty and already needing to buy a new set! DONT EVER BUY A CABRIO WHIRLPOOL.

My whirlpool refrigerator relay switch caught on fire and customer service told me that my model wasnt on their list of problems refrigerators, but they know there are a lot of units out with the chance that it could start a fire if anyone has a whirlpool product refrigerator. I would call 1-888-923-8502 and check to see if it is on there list to replace the switch.

The control knob broke off the washer when it was only two years old. I contacted Whirlpool by email about what happened with the dryer. The control panel is held tight to the dryer now with duct tape and the knob is held on also with duct tape. The knob doesnt work. It is stuck on timed dry so I can at least use it and adjust the time. I cannot use any other setting. It would cost about the amount of the dryer to have it repaired. The customer representative informed me that sometimes things dont last. Im glad for his profound wisdom, but Im stuck with a dryer held together with duct tape. I was offered an extended warranty, but the cost of repair will be nearly the amount of a new dryer. I will seek a different brand in the future.

I purchased the Whirlpool washer with the expectation of having at least clean clothes. In fairness, I do wash some pet items but they are done separately. My clothes at time come out dry in spots because theyve not been touched with water. Forget the balancing issue. What I will have to do is wash, rinse, and repeat. This will be my life until I can get a new washer. Never again Whirlpool.