I purchased my Whirlpool microwave model WMH2175XVS-2 in March 2011. The magnetron went bad 3 years and 1 month later. Thats only 37 months! Whirlpool is very sorry but of course the warranty is expired! Oh by the way, I replaced a microwave that lasted 10 Years which was a second microwave (which is still going after 15 years).

My dishwasher is very basic with no extra amenities, more features like an area on the rack that would wash the inside of small opening glasses and jars and I do not like the way my silverware holder just balances on the front of the bottom rack and does not attach to where it doesnt fall off every time its bumped.

My refrigerator has needed several repairs in the 5 years since purchased new. Several plastic parts (bins, handle, etc...) have cracked and ice maker no longer works. Dont think I would purchase another Whirlpool major appliance if at all possible, as I am deeply dismayed at how this one has held up.

We purchased a high end KitchenAid Refrigerator Dec 2018. Rust developed on water dispenser door in less than year. They would not honor warranty. Since March we have had ongoing cooling problems with 5 service calls and 4 different fixes and unit still doesnt work. Local authorized service company, Fields, in Jacksonville FL is incompetent. Whirlpool doesnt return calls. The products value is not consistent with the high cost. Here are the gory details. Ref: Setzers, Jacksonville FL (sold unit). Fields Jacksonville FL (factory authorized service company).Less than 1 year in, it began to rust. We called for a Warranty check. Fields Appliance (their factory authorized service company) came out and agreed all 5 doors needed to be replaced. A month rocked on, finally we called to find out where the doors were, and were told Whirlpool (Makers of Kitchenaid) denied the claim. Citing that we lived near the coast! Well, our other appliances arent rusting and the refrigerator doesnt sit outside! They sent us a 6 oz bottle of rust cleaner. A few months later, this refrigerator stops cooling! This was in March, 3 months out of 1 yr warranty. The refrigerant system is warranted for 5 yrs. This was also right at the beginning of Covid 19 shutdown. Fields could not give us a appointment, due to shutdowns. So, I called a local company to fix it out of pocket. He discovered a leak in the coolant lines, fixed the leak and replaced the coolant ($453.61 on 4/9/20). Great, it works! About 3 weeks later, it stops cooling again. Called local service repairman out once more to see whats going on. He replaces a thermal bi metal sensor and well ahh! It works again ($100 on 4/28/2020).About 3 weeks after that, it stops working again! We are thinking by now, its a problem for Setzers, Whirlpool, and Fields. We call the local service repairman out to confirm and he states that the evaporator fan motor will need to be replaced, and that part replaces all sensors as well ($59.99 5/28/2020 service call). We call Setzers and schedule an appointment with Fields. First appointment we could get was 6/16/2020. Guy comes out, and cited a factory defect, per a technical bulletin he had, and relocated a sensor. Simple as that, he assured us it was fixed! Even though I pointed out it felt no cooler when he packed his things to leave. It did nothing! In the background Setzers (when they would call back) were supposedly working with Whirlpool to help fix the problem! Whirlpools reply was that since our repairman was not factory authorized, it completely voided our warranty! Explaining we had no choice, since Fields wouldnt come out and by now we are without a working refrigerator for 3 months, they could care less! Feeling totally frustrated, we call Fields again! On 6/19/2020, they send out another repairman. This guy came in, opened up the back, and immediately stated the refrigerant was overfilled. Didnt do any diagnostics, just told us that we were **, and walked away, without even putting the refrigerator back in place! Neither Fields rep hooked up a diagnostic tool to confirm any real issue, I guess they just knew! Total incompetence! So... As of now we have paid the local repairman ($448.33 on 6/26/2020) to order the evaporation fan motor and install it this coming Monday (7/20/2020). Total amount out of pocket at this point, $1053.90. It took that long to get here! Wish us luck! Setzers wiped their hands clean of the issue and told us to call Whirlpool. We did have not ever received callback.

We purchased a Whirlpool Overhead microwave and Quiet Dishwasher in May of 2017. Within the first year, the microwave needed new sensors installed. The repair person said this was a design flaw and he was getting many calls. Then at 13 months, the dishwasher wouldnt drain. The repair person fixed the problem and left reset directions because this can commonly happen. Now at 18 months later, the drainage problem wont resolve even with the reset. Whirlpool extended the warranty by 6 months but wont cover this repair. Two appliances, two problems. Dont buy Whirlpool.

The washing machine continued to display an F1 error code. I contacted the manufacturer and was told that they will not do anything about the problem due to it being out of warranty. This is the first time I have complained about a product or service and want to try and assist anyone who may be thinking of purchasing a washer from Whirlpool. I do not recommend purchase of these units.

Whirlpool stove and dishwasher very good quality. I find that the quality is beyond excellent for the amount of money. I would highly recommend Whirlpool. Easy to clean, heats up fast, looks beautiful. I would never change Whirlpool for anything else.

My double ovens were locked and I could not open them. A repair man came, undid the latch, but did not have the replacement part. He ordered it and came back two weeks later to replace the latch. I paid the required $159.00 for the service call. In the meantime, I could use the bottom oven without any problem. He replaced the latch and discovered it was defective. In removing it, he damaged the ribbon in the control panel. He came back and put in a new latch, but now neither of the ovens would work because the control panel was inoperative. An attempt was made to order the control panel, but the control panel is no longer made. Instead, an attempt was made to repair the control panel. This took 4 weeks, and meant that I did not have an oven for Thanksgiving and had to totally rearrange my plans. Now I am told that the panel is not fixable and the best they can do is offer me a prorate on a new oven in which I would be charged $1374.00. I find this outrageous. Except for the latch, an easily repaired mechanical problem, the ovens were in excellent working order. Now I am being told that due to the problem caused by their repair person, I must pay $1374.00. I spoke to Stephen **, their customer service supervisor, who said that I have no further recourse with the company and there is no one else I can speak to regarding this problem.

Love my new Whirlpool Refrigerator! Works well and no problems for the last year. Filters are pricey but found some at Lowe’s cheaper. Whirlpool stays in touch frequently emailing information about their products, some useful some not applicable. Would I buy this refrigerator again? Yes, I love the ice maker, it is quite large (enough to fill a small cooler), and the convenience of crushed or cubed ice is nice. Most people complain about the motors are loud yet we have not experienced that.

I purchased this washer about 3 years ago to replace a dishwasher which lasted 20 years. Within a year the racks began to rot, the front panel plastic started to peel off. Within two years half of the racks rods completely rotted away. 3 years later the washer is busted - most likely pump which was probably blocked by one of the pieces of the rack rods. I am replacing it with Bosch - German engineering. Needless to say I will NEVER buy a Whirlpool - formerly reputable company again. Good-riddance Whirlpool.

I am very impressed with Whirlpool. After seeing my review, they contacted me and offered to send the parts to fix the problem with the LED lights. They sent a Whirlpool authorized repairman to my home with the understanding that since the refrigerator is out of warranty, I would have to pay him. Whirlpool also asked me to return the faulty part so they can research the problem. We are once again happy owners of Whirlpool products. Thank you Whirlpool!

This is the worst washer Ive ever owned. It consistently gets off balance, doesnt clean the clothes, and is a perfect example of poor design. I have owned the washer for approximately 9 months, and hate it. Im getting rid of it as soon as possible.

Whirlpool Gold Series Dishwasher - I wish I had discovered this website BEFORE I bought this piece of trash last year to replace our antique Maytag that ran like a champ for 10 years. But after 10 year the gaskets wore out and it started leaking. Even at ten years old that Maytag cleaned and dried better than this brand new Whirlpool. My complaints are the same as everybody else here. Doesnt clean even slightly soiled dishes and then it doesnt dry any of the silverware, or plastic pieces like measuring cups and tupperware. All are totally wet and need to be hand dried. So, why am I cleaning the dishes beforehand and drying them after??? The only good thing I can say about this unit, is that it is quiet. But, as my husband said, so is a brick, and a brick would be just about as good at washing and drying our dishes. Buyers Beware!!! This is a terrible product. Turned me against Whirlpool appliances forever.

The wash machine is JUNK. We paid $2500.00 for our washer & dryer at lowes in 2012. I HATE IT from the start. It has destroyed most of my clothes. I hate doing my clothes. The water does not get my clothes wet, they dont get them clean AND the washer dont even get them wet. THEY need to do a recall or get us a lawyer. ALL the money I have put in this washer. The price we paid for them is a SHAME. IT is WRONG they are telling people that this washer is the best. They lie. I HATE HATE THEM.

Despite always using the designated (he) detergents and trying many different brands in appropriate amounts, this washer always leaves an ugly white residue on clothes. This happens all the time, requiring whole loads of clothes to be rewashed, sometimes more than once. This defeats the whole purpose of conserving water, which is reflected in our water bill. We also placed the laundry room on the second floor to make it easier for me with my disabilities. I am constantly having to climb the stairs when the machine gets unbalanced in addition to the extra loads from the residue. I was very excited to purchase this machine. Unfortunately, these feelings didnt last long.

Bought a Whirlpool 25 cu ft side by side in 2011 and now just 4 years later the compressor is bad. Called them and they only have a 1 year warranty, which is nothing for a compressor. They told me for $350 they could replace it and it be good for only a year. Not going to sink more money into a product even the company has no confidence in. The repairman advised to stay away from Whirlpool as they were not the company they used to be. Also the salesman at Lowes where it came from said they used to have a 5 year warranty but changed several years ago and the quality also went down. We have had refrigerators last 25 to 30 years in the past but no more thanks to modern technology. Thanks a lot. STAY AWAY FROM WHIRLPOOL!

I have the same pilot light problems as everybody else. I pulled the burner unit out, and cleaned, and blew everything out, and took a wire brush to the openings on the floor of the unit. I called customer service, and was asked about ventilation. I didnt mention that the heater still didnt work, even when the door to the tin water heater was removed, so venting is not the likely culprit. She authorized a repair that will likely do nothing from the comments I see.The real problem with their customer service, is the apparent stupidity of the computer system. She asked me for the model and ID number. I had to cut through the extra insulation blanked on the tank to get it. However, when I gave it to her, she then asked me if I was ** and if I live at **. If this information was already in the computer, why couldnt there be a search by my name and address, to get the model and serial number. Obviously, I had registered the water heater in the past. Isnt being able to get this information the reason to register in the first place?Now, I have to replace the extra insulation, all because of a stupid inability to create the necessary searches in their customer database. Yes, I could have written the numbers down, but why have the customer registration at all, if it isnt to be used for anything, other than data mining of the customer base.

I have a new Duet Washer and it is a nightmare. It keeps throwing the same F8 E1 code. The repair people have replaced five parts and been out four times. I feel like I have been scammed out of $900. I will never purchase a Whirlpool again ever!

I am extremely disappointed in my new Whirlpool washer dryer matched set. My washer started to leak at less than 6 months of age, and my clothes are extremely wrinkled due to excessive spin and smell absolutely foul. I have adjusted the spin cycle to the lowest setting to prevent wrinkling as suggested in the product materials. I have cleaned the washer with the recommended product on the clean washer setting, although now with the leak, that means a good floor mopping too!I have contacted customer service about the leak since the machine is still under warranty - and they gave me a 4-hour window on a specified day for the service. I took the time off work and the technician failed to show. I called twice to follow up on his whereabouts and ETA. They did nothing except tell me to keep waiting. 45 minutes after the outside hour of arrival had passed, I called again. The customer service offered to make me another appointment so I could take another half day off work and hope he would show up the next time. When I asked for a preferential booking (with a real time) to minimize taking more time off work, the manager said all she could do was give me another 4-hour window. I said that was really bad service and she hung up on me! Another rep did do a little better - he sent me a name and number and said I could try to book an appointment directly and hopefully minimize the additional time off. Its the last Whirlpool appliance Ill buy - with that kind of customer service, Id rather be out pounding my laundry on a rock.

I have a top-freezer model WRT5715MYW. This week will mark the 3rd time Ive had a service call to complain about food freezing in the refrigerator compartment. The last time the repairman told me I couldnt place food in the center of the refrigerator since that is where the cold air from the freezer compartment comes down into the refrigerator compartment. This time when I called to schedule the repair call, the woman at the appliance store where I purchased this told me she also has a Whirpool refrigerator and she cant place any food on the bottom shelf of the refrigerator due to freezing. So this 21 cu ft refrigerator has a lot less usable space than I was led to believe when I purchased it. I would not recommend this product due to this reason. Beware of that channel that comes down the center of the back of the refrigerator. It seems like a design flaw to me.

After just 2 years, the electronic control board failed. The temperatures are stuck on the coldest/high mode for both the freezer and the refrigerator, spoiling some foods. The parts and repair are going to be $300. Whirlpool will not replace the defective part or pay for any repairs. Shame on Whirlpool! Model No. GB2FHDYWQ01.

When we moved into our home this past year there was a Whirlpool gas stove model number W10406473A. We have the plastic knobs on the front of the stove which need to be pushed and turned in order to turn on the gas. I recently ran into a serious problem where my cat walked across the knob area and pushed and turned the knob causing the gas to come on the stove. This is a problem due to the fact that a child could have also have easily turned on this stove. This is a definite fire hazard as well as a carbon dioxide problem. I warn anyone with this stove to replace it with another make or model immediately. Im in the beginning mode of looking to see if a recall has ever been made on this model.

I have an oven hood Whirlpool Microwave. Even though its more of a basic model it has worked terrific so far at about 5 years old. Only draw back is the extremely loud 4 beep alarm upon completion of warming up food. I actually cringe when it is about to go off especially early in the morning. Ours doesnt have the handy options button to turn it off. I have tried other combos with the buttons to see if they have it set up different but to no avail. Does anyone know if you can shut it off. The people who design these things must not have babies because they would think of this at nap time Im sure. Truly the sound this thing emits could wake the dead! I also had the fancy Whirlpool before like some folks mentioned about the handle and door frame cracking and disintegrating. Guess what, so did my parents, sisters, aunts and my neighbors. Definitely a major design flaw or faulty materials. My sister, mom got new doors and they began cracking again within a year!

I purchased an appliance package Whirlpool Gold series that included a range, refrigerator and dishwasher. This was approximately 3 years ago. The range has already been replaced by Whirlpool after having it repaired twice and, finally, following the complete breakdown on Thanksgiving with turkey in oven. The refrigerator has broken twice and the computer box that controls all functions was replaced twice. The compressor goes off randomly and is currently off again at the moment. I woke up this morning to this and the temp inside is around 50 degrees. Needless to say the food inside is a loss. I will never purchase any Whirlpool appliance again. These were not inexpensive appliances by the way.

Light bulb went out in the freezer. Come to find it is a led cluster with a circuit board only cost $30 to $100. Engineer should be fired. What is the reason to take simple bulb and custom bastardize into an expensive hybrid. Greed.

Bought the model before this just over 2 years. Conveniently it broke just after the warranty expired. I chose not to buy a extended warranty as my last fridge from KitchenAid is over 20 years old and never had a single problem with and still operates like NEW. I can’t say that for my Whirlpool which was very expensive. It has been with an issue within the ice maker for over 8 months. Every computer board has been replaced twice with no fix. Then tried to replace the cooling fan within the ice maker unit seven times. Whirlpool could not find the right part, as the wiring had changed mid model and have no record of when it was changed and what models affected.Certified Whirlpool technician was great and so apologetic. I had taken 7 Mondays off to meet him to only have the wrong part time and time again. Whirlpool support tech line basically said he was wrong, yet I witnessed all visits and my 3 plug fan unit did not match Whirlpools newer part that was 2 plugs. I was not happy missing so much work because Whirlpool is incompetent. Finally my tech ordered a whole new ice maker, including the cooling fan. Lo and behold, Eighth time, parts did not match. He again called Whirlpool tech support and reordered another set one final time. Another Monday to find that this time the parts did fit, but cooling fan still did not work. He called Whirlpool tech support again. They started to trace wires one by one.Whirlpool tech support said it was a bad or broken wire somewhere in the cavity of the fridge buried in insulation and was not replaceable. In other words I have a $3000+ refrigerator that is useless. Whirlpool said they would replace the unit. But when I called, they said since I didnt have an extended warranty, they would prorate it and it’s going to cost me over $1000 of my money to to replace due to a manufacturer wiring defect after only 2 years. What the Heck, I was willing to pay to fix it, but Whirlpool can’t fix it. Don’t buy a Whirlpool product as they are Junk and do not stand behind their BRAND!!! No matter who I talked to, they kept falling back to their word track of it’s my fault I didn’t get an expensive extended warranty, yet they can’t fix a wire they installed incorrectly.Wires don’t just break after 2 years. You get longer warranties for cars for the Love of God. I asked them to just send me the money they were willing to put towards a new Whirlpool fridge, so I could buy a Real Brand that stands behind their products like KitchenAid. Of course the answer was NO. Buyer Beware, don’t buy a Whirlpool anything. Did I mention my Whirlpool certified technician was having a Whirlpool dishwasher issue that Whirlpool can’t fix and that’s his profession. Same type of response. Don’t Buy Whirlpool Products, they are Junk and you will get No support from Whirlpool!!!

Bought a Whirlpool hot water heater from Lowes 1/08/12. In May of 2013, it would not work. I had to replace the Gas Control for around $100.00. It was 4 months off warranty! The same thing happens 3/2014. They sent me a new Gas Control Valve free and shipped it overnight. This is no fun to fix. I cannot believe that I need to flush the tank out with cider vinegar every 6 months. That is why I was told it keeps breaking.

I purchased this set in November 2013, it is now October 2014. I made the same mistake as many others have made (according to the reviews that I have read on this site). Because I have owned Whirlpool brand appliances before - including washers/dryers - I assumed this new HE machine set would be every bit as good + quality. Unfortunately, I did not do my homework!Everyone is right - this Cabrio HE washer/dryer combo is nothing more than expensive JUNK!. My complaints are all the same as everyone elses: the clothes do not get clean, soap residue remains on clothes, the clothes even have parts of the articles come out of the wash cycle dry not even having had the water touch the articles in areas! The dryer has been repaired once already for a dryer sensor problem & overheating, now both the washer & dryer are making some ridiculous hum-drum noises! Even with the extended warranty that I purchased, I can see the loop holes built into it; theyve got me over a barrel with the nonsense mumble-jumble tactics of having to qualify for adequate service repairs for replacement of parts (3x on each machine) they cant find, before even attempting to negotiate a buyout that will never happen. Never again, Whirlpool anything!!!

I will never touch the premier Whirlpool Brand Again. This is the two door fridge + drawer freezer, model GI7FVCXWY0After about a year, and I think it lasted this long because the ice maker was off during winter (because unless you use it constantly you have a solid block of ice), after a year it stopped making ice and poured water out from the top of the fridge. Expensive extended warranty came and replaced the Ice Maker, which (about a year later) has just started leaking all over the floor (again).This I suspect was a protest against using all of the ice one day. It froze up, which causes the leak, froze solid items that were in the fridge compartment (and spoiled some items).The other design fault is while the right hand door will stay open, the left will not, it closes. But it does not close properly - just enough to make you think it is closed.Dangle beers in a nearby stream, keep your food in the cellar, dig a deep hole in the backyard, learn to eat all your food the day you buy it, but do not buy this fridge!

Does clean well but I notice that even on heat drying there is still water on the inside of the door when I open it. I have loaded it up and even the glass baking pans came out sparkling. I would recommend this middle of the road priced dishwasher.

I purchased a washing machine FS65 on 10-30-2005. In Oct. 2009, my washing machine developed some fault so I contacted the Whirlpool service center and got it repaired. Again in Dec. 2010, the appliance became faulty and so I contacted the service engineer to attend to the machine. He repaired it and I paid 2500/-. But the very next day, my appliance showed the faults again. It was rectified with replacement of PCB and I was charged 2786/- on 01-20-2011. Again on 09-04-2011, the machine became defective. On the call to service center on 09-05-2011 and attended by engineer on 09-06-2011, I was informed that PCB is defective. I failed to understand that the PCB replaced in January was of what quality that it has to be replaced now after such a short span of time. I feel that this is clear cheating with me.

I bought a Whirlpool refrigerator, model # wrt779reyb00 with serial # vs13537798. The icemaker quit working and then water started leaking out from the door. A&E serviceman came out to repair and said we needed a new door. It had been over 11 weeks and the door still has not arrived and we have been told it could be as late as November. When I purchased an item, I expect it to work and if not, to be repaired within a reasonable time or be replaced. I have called and been told that replacement is not an option and that I will just have to wait. This is unacceptable. I purchased this refrigerator with water in the door and an icemaker and I expect it to work.

I bought 40 gallon gas water heater in June 2004 and had to have it worked on twice, costing more than I paid for it. I am replacing it now because pilot light will not stay on, and it is currently out of warranty, and I have no faith that simple repair will hold more than 1 year stint. Customer service was attentive but product itself failed to meet expectations.

Whirlpool WRF993FIFMOO: Refrigerator Problems: the doors do not close, both ice makers went out, The computer on the filtration will go off. Refrigerator had problems maintaining temperature since 8.12.17. The refrigerator no longer works. This is my second unit since 11.09.16. It came from nfm.com.

It was a complete nightmare buying our all side by side stainless steel freezer and refrigerator. Freezer still working fine but the refrigerator started blowing hot air, all the food spoiled within 2 days as we were trying to figure out what was wrong. The store did the best to correct the problem and it seemed the Whirlpool company had no faith in their product as over the phone recommended having extended warranty. So sorry we bought this product, nothing but hassle!!!

Whirlpool N50T61-403 - I bought this thing today 8.21.14 from Lowes. It is a Whirlpool 50-Gal water heater (6th sense) and was going to have it installed by their installer, but elected after seeing it was very similar to lining up with my old unit. I got it in and then filled it. After filling, I lit the pilot light per the instructions then turned the knob for heating it up. Success, the flame spread across the burners...then went out. The steady blink changed to the 2 blink code indicating a bad thermopile. It did not work - right out of the box. No plumber near me carries the part. Whirlpool has thus been pretty good about it offering to have someone come out at their cost... But if no one has the parts, that is no good. I am moving from this house so if we can get it to work, its the problem for the next owner. If not - Ill have to get an RMA and go back to Lowes... Then try the Rheem from Home Depot. Will see if they will overnight a part tomorrow. I found the other reviews - and I dont like it that this thing appears to have difficulty right out of the box.

Bought this machine June 23, 2016. First use, I called Lowes where I purchased it to say there is something wrong as it makes a grinding noise. I was informed that is normal for agitatorless machines. I asked if he could hear the noise, and he said yes, thats it. So I disconnected thinking, Wow, who makes a machine in todays technology that is so loud you think something or someone is in serious pain?! Now am at the point where I want this design in pain out of my house! Going to Lowes today to try and talk rationally for a complete refund so I can purchase an LG or Samsung which is what I should have done originally.

What is the brilliant idea of a mode dial on a washing machine that needs to be pushed in or pulled out to engage its function??? In other words, why is there a free-spin mode of THE DIAL itself? Okay. IN OTHER WORDS, why not just let the handle part of the dial stay affixed to the red line mark, so that they continuously turn together at ALL times???

We purchased the Induction Range Whirlpool Model WF1910H0AS0 almost 2 years ago and bought the extended warranty that was offered by A.J. Madison. We started having problems about 8 months after the purchase. We have had technicians out numerous times and they couldnt solve the problem of the cooktop part of the range locking and beeping when we use the oven. I have made several calls to Whirlpool and basically was told too bad. I see that there have been several complaints with the product and they have stopped making it. On one repair visit we were told that they were replacing a particular part because they were having so many problems with the heat blocker that goes under the glass top that they made it thicker and were hoping that this would solve the problem. It did not.The thing that really has sent me over the edge is that last night I was just boiling water and I heard a pop that came along with a smell (electrical burning smell) and the range blew a fuse and now the cooktop part just shows the deadly error F47. I am so disappointed in Whirlpool and their customer service and too bad attitude. You would think when you are spend almost $1800 for a range that it would not have problems so quickly and pretty much render useless in less than 2 years. Also shame on A.J. Madison for selling extended warranties through a company that has such a bad ratings with the Better Business Bureau. The only reason I gave 1 star is because you cant have no star.

Do not bother purchasing Whirlpool refrigerators. Bought mine new in November. The paint on the exterior has been chipping. They inform me that its a cosmetic issue and that they are not going to repair it. They told me to use touch up paint. The paint has chipped more than once and Im afraid this is going to be an ongoing issue. Its obviously a product defect (my last fridge lasted 27 years without incident). I dont do business with companies who dont stand behind the products they manufacture. These days its all about get their money and the hell with them once we do. Last time I purchase anything Whirlpool.

It was time to put the old Frigidaire Washer out to pasture. I researched for quite some time online to find just the right new one. Its all so confusing as they all claim to be the best. The Whirlpool WTW500DW Top Load is the one I chose to look at along with 2 comparable others. I have had Whirlpool appliances in the past and was always happy with them, so I will be honest, I was leaning towards Whirlpool. I purchased the WTW500DW and matching Dryer after looking at the 2 others first. Price was lower, features were more to my liking and better quality/sturdiness was very apparent to me. This was the lower priced machine out of the 3 but had everything I wanted and a little more. The HUGE wash basket is wonderful. I have literally cut our laundry down from 4-5 loads a week to 2! Our clothes have truly never been cleaner.I am amazed at the great job this machine does with a minimum amount of time and water. It is quiet, efficient and the cycles do what they are supposed to do. The absence of electronic pad buttons is greatly appreciated. Its standard dials are easy to read and set. In my opinion, Whirlpool has done it again. Its a great Washing Machine at a price that is lower than others without as many nice features, it is well built and does the job perfectly.

Bought a Whirlpool Cabrio. Noticed it was getting really loud less than a year into owning it. Called while it was under warranty. The tech said it was fine. Within the next year and a half it got so loud, you cant hear anything else in the house while it is running. Now it is leaking from the tub seals and the bearings are going out according to two service techs I have had come look at it. They say it is more expensive to fix than the washer is even worth. This is due to the parts that would be used to fix it are the same cheap Whirlpool parts that were put in it in the first place. They both said that these are not good washers and commonly go out about a year and half to three years old. Shame on Whirlpool for making such a low quality product and not being willing to do anything about it.

I purchased this washer from Lowes 5 months ago. I did not purchase a store warranty. Started having problems 60 days later. I have to deal with a Whirlpool rep. The company is 150 miles away. They have been to my home 3 times to resolve the issue. They replaced an air trap. The problem... my clothes still wont spin dry!!!

Whirlpool Cabrio 6600 SW2 - Somehow a coin or two (?) are under the tub. It is not a high pitched sound. Just sounds like the machine is rubbing against the tub or something when it is being used. It does an excellent job of washing and spin drying the clothes, but the noise irritates my wife, which then irritates me. I took the top piece off and can see a coin DOWN there, but cannot reach it. Must I turn the machine upside down and try to shake the coin(s) out?

We have a wtw5500xw2 washing machine we bought 03/2012. We can no longer use it. The machine would not spin or agitate so the clothes do not get clean or get the water out and after the cycle is done we have to wring them out after to be able to take them to the laundromat. So two repair companies and 3 months later we find out that it is the wiring harness that is the culprit. After a new motor and a shift actuator, we contacted Whirlpool only to be advised that the washing machine is out of warranty and that we are out of luck. If the company has a known issue about these wiring harness they should be looking into it and changing suppliers or offering to replace the wiring harness at a discount to its customers. I will not be buying a Whirlpool appliance ever again. I would recommend going with a Kenmore. I have had a Kenmore dryer that I got 19 yrs ago that we got used and only had to replace the heating element.

We purchased the Whirlpool refrigerator (model ED5LVAXVQ00) 4 years ago. The plastic around the top shelf cracked within two years but is not a warranty item. Now, all the plastic surrounding shelves have cracks and the slides for the pull out drawers are also broken. My wife and I are retired and have not overstressed the shelves. The cost for replacing the cracked plastic will be approximately $250 (hardly worth fixing)! We are very disappointed that a once reputable company would build and market such an inferior product. I hope this comment will warn prospective buyers to be careful when considering Whirlpool refrigerators. Very disappointed!

I have used Whirlpool products for over 30 yrs. This is the worst made product I have ever purchased. The ice maker doesnt produce very much ice. The cold water on door isnt cold. There is too much wasted space in freezer and refrig. side. You cannot get anyone to call you back to call for help. I contacted Whirlpool over a month ago. No return call yet. Consumers beware!! Model no. WSF26C3EXF01.

Worst purchase I have ever made. When I purchased this Cabrio washer in 2015, I didnt find bad reviews but how I wish I had. This washer does not clean clothes well. It has caused holes in clothing and towels. Often all the load wont even be damp even if using the deep water feature. The wash loads rarely fill more than couple of inches. Clothes come out twisted and terribly wrinkled. Sheets and blankets will be half dry and unclean. TERRIBLE APPLIANCE. WOULD NOT RECOMMEND. Now I am stuck with a high priced washer I wouldnt even feel good about giving away. WONT FILL. RUINS CLOTHES. TANGLES LOADS. DOESNT CLEAN. DOESNT RINSE PROPERLY. DO NOT BUY!

We bought a dishwasher, stove and refrigerator last month. Dishwasher and stove work great, however the refrigerator is junk! The freezer part works great, but the refrigerator doesnt cool at all. The first time he was here the repair man said the seal on the door was bad and he glued it. He told us to not open the door for 48 hours then everything would be fine. IT WASNT. A week and a half later he came back. He looked inside, scratched his head and told us, “This model should have the “deluxe” fan and I dont think it does!” Said he would be back in 6 days with the fan and well “see if that fixes it”.I called Whirlpool service waited on hold for an hour before getting cut off. Called back waited 35 more minutes but actually got to speak to someone. The big solution... They offered me a 6 month extended warranty!!! Ive lost an entire refrigerator full of food. Missed two days of work and am going to miss another when he brings the “deluxe” fan. Also been eating out all month and probably spent $100 buying ice. IE... MOST EXPENSIVE REFRIGERATOR EVER!!!

I felt compelled to write this review, to sum it up NEVER buy ANY Whirlpool, KitchenAid etc brand. Nothing but the worst experience, it all started with a 5 year old Whirlpool fridge that stopped cooling, I called and they said they could send someone for like 200$ and that it does not guarantee it will be fixed. So I called an independent and he tried to refill the freon, but it was leaking behind the fridge in a section you cannot access because they want you to buy another one, so 5 year old fridge in the garbage and now to top it off, a KitchenAid knife set that is barely used, one of the big knives broke cutting a fruit, and good luck in any circumstance getting any customer service. SO NEVER AGAIN, TRUST ME AND PUT YOUR MONEY ELSEWHERE ON ANY OTHER COMPANY.

I havent had my Whirlpool Cabrio washer for even 5 years and I have had to replace the glass lid and now the tub bearings need to be replaced... I have read countless complaints for the same issue. I feel like Whirlpool should at least send out free replacement bearings and the $85.00 bearing press tool that you will need if youre handy enough to fix the problem yourself. PS to all of the poor victims of Whirlpool bearings, go to Amazon and you can buy the bearings and the tool for about $150.00. You will need to order bearings part #10435302 and the bearing driver tool #w10447783... And as far as my matching dryer - knock on wood - it still runs great.

We purchased this combo from Lowes; checked my account and saw we were double charged! Got the charge adjusted; jeez. Bought this size to do comforters and large loads, but nothing large gets completely wet. Our clothes started to mildew as Affresh does not work. Im allergic to mildew and got headaches. The mechanic said this mildew is because all the action is under the basin and you dont want to see how black it is under there. It began to leak as buildup went into the bleach dispenser, and it turned black.He said to run a gallon of white vinegar in the clean cycle once a month, and this did work. I did a clean out with Castile peppermint soap, several white vinegar treatments, and got rid of the mildew and the (clog related) leak. I now use Mollys Suds powder. I was shocked to read on the Mollys site that mfg does not have to list all the terrible ingredients in commercial detergent, which is not helping you or the machine.

Whirlpool gold series gas oven with Aqua Lift. Very unhappy with this oven. Cons: Aqua Lift technology doesnt work AT ALL (manual cleaning required); stove top hard to clean; 2 front gas burners are super burners which is fine for boiling water, but too hot for regular cooking. Would be better to have one super burner in the middle or back but two up front is way too hot for regular cooking, even on lowest setting; oven cuts out while cooking -- unexplainable how this happens but you really have to watch the oven while cooking to make sure its still on. Pros: large oven so you can cook ginormous turkeys or prime ribs.

I purchased my Whirlpool Cabrio in November 2009. I am just four months shy of the two-year mark and it is dead! I paid a lot for the machine because I thought it was worth the investment. It was not mistreated in any way! The problem is in the computer part of the machine.Everyone knows that to have a repair person come out is costly in itself, add to that repairs and parts, and it isnt worth it to fix an appliance most of the time. I will never purchase Whirlpool again. Never. I could have bought three cheap machines for this one Whirlpool, and had a couple of backups in the event that one quit on me! Now I have a fancy washer and a mountain of laundry!Thanks, Whirlpool.

On 16 March, I lodged the complaint to Whirlpool’s service center in New Delhi. My service request number is **. Engineer’s name is Dharmesh. He came for the first visit and he sent the person named Hassan who said there is gas leakage problem. I told him that problem is much more complex than leakage as I have already checked about the leakage, but he didnt listen and repaired and took Rs 2995 from me by giving 3 months warranty. The fridge again got damaged. Now, when I talked to Ms. **, she said the compressor is damaged and it will take Rs 2000 more, which means my earlier Rs 2995 has gone into vain and they are demanding Rs 2000 more, though it is in warranty. When I asked her that I want to talk to a senior manger, she rudely talked and refused. I called Whirlpool’s customer care on 01160008558. There’s a guy named ** who abused me and behaved rudely with me. The customer care executive doesn’t even have bit of manners as how to talk to the customers. It’s really a shameful thing which I had not even expected from the brand company like Whirlpool. I want very strict action to be taken against Ms. **, Mr. ** (CCE). I also want my fridge to be repaired as soon as possible without a single penny or I want my earlier Rs 2995 back.

It has been a rude awakening, that Whirlpool is a substandard company. I have gone through 3 refrigerators under the label Kenmore, Whirlpool & 2 1/2 days ago Maytag. I purchased a Maytag 9 years ago and it is still working fine, and even cools a bit too much. Now mentioned labels are under Whirlpool; Since Whirlpool bought out Maytag in 2006, Whirlpool turned Maytag into a sub standard product company. They are spuming refrigerators with defective thermostats. Just think of it, I am one customer that have had the same issue with 3 REFRIGERATORS UNDER 3 LABELS MANUFACTURED THE WHIRLPOOL. I just called Maytag, and when I tried to make sense of the name of either Daren, Karen or Taren, ** hung up on me. I then called Home Depot online major appliances & ended transferring me to WHIRLPOOL!My Maytag refrigerator was delivered 07/25/17, after less than 24 hours, I had to move the settings to 4 from 3 for the refrigerator. She said that if the refrigerator cools enough at 4 then there is nothing wrong! Nothing wrong! To be substandard, in my book its plenty wrong. They have no business sense nor customer service sense. I will buy another refrigerator or appliance from any Whirlpool labels when hell freezes over! For them to accept substandard parts, probably foreign, it is not acceptable in CA nor the USA. Since; since this is a foreign owned company, I pray they will be a company not doing much business in the USA unless the measure up to our standards. Since; going forward we will make American and Buy American!

I have automatic Whirlpool washing machine since 3 1/2 years I am using. Now 2 times electronic board came problem so how many times can change like this? Why they are manufacturing if they cannot solve this problems? Should not sell in the market. This all not coming free and need to struggle. Whirlpool products all very bad appliances.

I am excited that I found this site, putting it in Favorites! Using the advice from ConsumerReports, we purchased a Whirlpool Gold French door refrigerator model GI 6SDRXXY02. We were looking forward to the energy efficiency reported. I blamed the kids and my husband when the water started appearing on the floor by the refrigerator. After a while, I started investigating and I saw the sheets of ice that had formed in the bottom of the freezer. Several times, I removed the ice, only for it to form and start leaking on the floor weeks later. We discovered the drain was frozen and that during the defrost mode, water would freeze in the bottom, and once the ice was too high, the water would flow over the ice onto the floor. My husband has unloaded the freezer and defrosted the drain with a hair dryer several times. So sick of this!! We never received a recall notice and of course, the warranty is out. I wish we hadnt paid so much for this refrigerator. It would have been out by the curb months ago. We are in the middle of a kitchen remodel and getting new cabinets. I will have to dispose of this expensive refrigerator. UGH, money down the drain!! We wont buy a Whirlpool!!!

In August of 2008 I purchased a Whirlpool Amana refrigerator, Model# ABR2227FES. It worked great for exactly 6 years. In Aug of 2014, the motherboard needed to be replaced as it was not forcing a defrost when needed. I tried to get a refund on the cost of the part and labour but both were refused. In Dec 2016, just two and half years after the motherboard was replaced, the exact same problem re-occurred. Again I tried to get a refund on the cost of the part and labour but both were refused. Will I be buying this refrigerator in the future? A definite no!!!

Whirlpool washing machine M# wtw7340xw2 / S# c14270996 - Bought in 11/26/2012. Never was real satisfied with the way the clothes were washed. They never came out real clean and smelled like there was still soap in the clothes. It has been less than two years and now it will not run. Turn the unit on and all it wants to do is turn on the pump to drain the tub. Im a refrigeration technician and know how to run a diagnostic test Whirlpool has for this machine. I get an LF code which is water long fill so I checked out the water tube which is ok. So the problem is in the circuit board not sensing the water level. To replace this board is around $350 dollars and if I had someone else do the work I would be looking at over $550 dollars. I only paid around $500 dollar for the washer so it does not make any sense to put a new solid state board into this washer which cost as much as the washer. Our old GE washer lasted us for over 20 years and did a better job washing our clothes. There should be a better warranty on these machines than one year. I did not buy the extended warranty because of the cost and I expect that the product should last at least 10 years or more.

To Whirlpool Headquarters, Our message to those whom wish to listen is that your product is only as good as the service company you employ to handle service and repairs. Our most recent experience with A&E Factory Service has us convinced we will never buy Whirlpool appliances again. After a two week wait for our scheduled appointment we were dealt a most unprofessional diagnosis as to what may be the problem and then told that to service our appliance would result in overtime and that simply wouldnt be happening at this visit. The appointment time was 12 to 4 PM the repairmen was here at 2:30 pm only for five minutes. We have spoken with a Michael ** with your company who advised us to wait for a call from A&E which no call was ever received. We will be sharing our disgust with Home Depot where we purchased our refrigerator and alerting them to avoid further customer dissatisfaction by no longer promoting Whirlpool in our area. We are level headed and fair people just not able to grasp that a company as big as yours cant do better than this.

Bought the Whirlpool Duet washing machine. It lasted around eight years. In the meantime I was replacing the rubber door seal cleaning out the pump constantly. The plastic pieces inside the drum all broke. Every few months I would get an error code. And During spin cycle it would literally shake my entire house. The problem with all the front loaders is the construction of the drum and the drum bracket. They are made of dissimilar materials. (Stainless and zinc) When you add soap to the water then the bracket becomes an anode and the drum becomes a cathode, which creates electrolysis which corrodes the bracket. When the bracket breaks your machine is totaled. I’m finished with every manufacture except Speed Queen. I bought a Top loader Speed Queen and I love it, it is built like a tank.

Bought this new in Oct 2012. A week back stopped working. After a week found out it needs new compressor and will cost 1,096.00. Paid 2,100 for this new and now need to buy another fridge but not this make.

The top of the range stays very hot. Not the burners -- just the top of the stove itself. Now the oven pilot wont light and there doesnt seem to be any sound or smell of gas when I try, though the range works fine.

Although stackables are a little pricey, Ive had this dryer for around 10 years and its still working just as good as the first day! Never had any repairs done on it. Great dependable dryer and washer!)$ Ive dried regular size loads in it also! A loyal appliance through and through! Thanks Whirlpool for such a great and dependable product! Whirlpool Heavy Duty-Automatic Dry Miser-End of Cycle Signal*3 Cycles.

18 months old, fridge was not cooling properly. Two service people came including the last one from Whirlpool, said the cooling system is bad and unserviceable. Called whirlpool and they were not helpful at all.

I purchased my Whirlpool Cabrio washing machine a couple years ago at Lowes. It sucks. First of all, my washer stinks all the time. It smells like sewer even after the cleaning cycle. My dark clothes come out with a white residue, and my whites come out with dirt on them that wasnt on them before washing... All this even after running an additional rinse cycle. How is this energy efficient? Not to mention, time efficient??? Crazy that once you buy something like this for this amount of money youre pretty much stuck with it... Isnt there a lemon law for appliances? This was so expensive and such piece of crap. I will never buy a Whirlpool washer ever again!

Extremely unsatisfied with their customer care. I purchased a washer and dryer 18 months ago and did not choose to purchase an extended warranty. I currently need a main control board replaced after the machine stopped spinning and draining. I hired a wonderful handyman, who originally suspected the lid--locking mechanism was the problem. When that was replaced and the machine still wasnt functioning, he determined the main control board needed replacing. This is a manufacturer defect and costs approximately $300 for the part, not including labor. Of course, my machine is no longer covered under the extremely limited manufacturers warranty that only lasts for 12 months, so I am stuck picking up the bill. Once done with all the parts and labor, its cheaper to buy a new washing machine especially because they still wont add a warranty to it after its fixed. I think its absurd that a manufacturers defect isnt continually covered under warranty no matter how old the machine is. Customer service continued to tell me I should have wasted more money on a company that doesnt care about customer satisfaction and purchased an extended warranty originally. Horrible investment! Will never purchase Whirlpool appliances ever again!

I wish to file a complaint regarding a Whirlpool flattop electric range that we purchased approximately eight years ago. After the first year, a residue began to build up behind the glass on the front of the oven door. Finally, about 18 months ago, I decided to try to unscrew the back of the door in order to clean this since it got increasingly worse year by year. When I unscrewed the door, the side metal bars broke off and the range is to say the least, looked very unappealing . When the oven self cleans it makes the outside of the oven brown and very unappealing.This is a Whirlpool Gold, Super Capacity 465 range. We have been dissatisfied from the beginning. This complaint is not about the retailer, it is about the Whirlpool product. Please help as I am quite dissatisfied with this Whirlpool product at this time.

I have purchased all new Whirlpool appliances for our new home in March 2009. I have had trouble with the refrigerator door panel and will not switch between ice and water. Cost to replace over $100.00. Now its the range. When turning on the oven, my wife said she saw a flash of bright light and then I turned around and it was smoking up the house! I quickly pull the stove out and unplugged the stove. I then remove the back panel and found the right side of the control panel was burned. Had I not pulled the plug, a fire would have started. I have pictures to prove that! The cost to replace the control panel is $267.00 and that doesnt cover the repair man coming out to test if anything else is bad!

My Cabrio washer is 6 years old & has performed poorly from day 1. It does not clean properly so I have to rewash or wash clothes on a longer cycle (so much for energy efficient), it sounds like a plane taking off and has actually startled visitors, and it mysteriously forms sheets, towels & blankets in the shape of spare tire. This is the worst washer Ive ever bought.

The washer does clean simple stains. The clothes end up all twisted (sleeves & pant legs). Antiperspirant gets transferred to dark clothing. Large loads do not get clean and the response from Whirlpool was run everything on hot and for longer than normal times. The enviro rating and low water usage claim has resulted in a machine that does NOT fully clean clothes. Look elsewhere and do not buy.

Its just okay. It doesnt clean as well as I expected to regardless of which dishwasher cleaning brand or type I use. It frequently leaves full residue even if the dishes have been pre-soaked. Even though I have it set to see to it, I feel it leaves too much water on the dishes. It doesnt have a rinse and hold setting. This dishwasher doesnt have any extraordinary features. It just has the features you would expect to find on any dishwasher. The size is average but it handles the amount of dishes I have as a one-person household. Its unobtrusive; nothing sticks out, there is no faux metal on it. Those are all features I like. Its not as quiet as it makes itself out to be. On the whole, I feel this is a very average dishwasher.

I purchased a Whirlpool French door refrigerator model # gx5fhdxvyo4 in June 2011. Four months ago, ice was forming on the bottom of the freezer. Repair person replaced a clogged plug leading to evaporation tray. Its March 2013 and repair person now has to replace evaporator motor part # W10128551. I contacted Whirlpool and was told the warranty has expired (one year). This repair will be around $175. How can I trust a Whirlpool product in the future?

Whirlpool Cabrio drain problem - I never had a washing machine that lets so much through to the drain pump. I replaced pump three times already. First of all, if you put anything with buttons in this machine, you can kiss it goodbye. This machine destroys clothes then lets buttons and coins and whatever through to destroy the fins on the discharge pump. When is the BBB going to do something about this consumer ripoff?

I always seem to get Whirlpool washers. They are dependable but when they break down theyre down and usually its better to replace than to fix it....I would rather have a Samsung product because theyre more modern and have better styles to them.

I had sold appliance for ten years. I purchase a Whirlpool Cabrio 2010. After two years started rusting. It is rusting on the outside and now on the inside, that I cannot wash delicates or whites. I so disappointed. I had lots of confidence in Whirlpool. The model is wtw7300xwo... I call talk to whirlpool but got no help. Now I going to need to purchase a new washer. It will not be a Whirlpool.

The 12 year warranty, means nothing. The heater only worked for 30 months, and then its upper sensor fault code flashes, and the heater shut down. I called Whirlpool, and they have me use an ohm meter to help troubleshoot the problem. So if you are not handy, you are out of luck. They decided it was my control unit that is defective. They will send me the part free, but I have to pay shipping and installation. What a deal, and what kind of management would dream up of this. The heater is marketed as a 12 year warranty model (only on the tank). Would anyone, having been through this, buy another Whirlpool product?

I purchased all new Whirlpool appliances for my kitchen from Lowes about 5 years ago. The dishwasher was leaking water onto my hardwood floors after about a year. I figured out that the seal was pulling away on the lower left corner. I fixed that myself. It cleaned pretty well for about 3 years. Now its not cleaning at all. I took the lower spray arm off to try to clean it. Almost all of the holes are clogged with debris. (I clean the filter at least once a week.) I went ahead and ordered a new sprayer arm, maybe that will help.As for the rest of the appliances... After about 6 months, the freezer started filling up with water that then froze on the bottom and allowed water to pour onto the floor. The microwave handled broke after about a month. (They did send me a replacement handle.) The knobs on the stove are starting to peel. One of the knobs wont stay on, so I keep it in the drawer next to the stove. Overall, I am very disappointed in all of the appliances. This will be the last time I buy Whirlpool.

I have a lower end 4 burner model but I love it. Both power burns are in the front (I would change that) and electronic ignition. The oven temp is true and heats up quickly, I bake upwards of 700 cookies at Christmas time. Even being a lower end model it works great and I use it everyday. I think it is more energy efficient than the model that I replaced, which I replaced in order to have the electronic ignition. I would recommend this Whirlpool Range!

HORRIBLE! I purchased a Convection Oven Microwave in Oct. 2010 and 3 months later, the microwave stopped heating! I called customer service and they replaced the magnetron and two other parts. Two months later, the appliance broke again with the same problem. They serviced it again. Today, it was broken again and the service technician stated that its the magnetron again. I called to get it replaced and they said Whirlpool doesnt replace appliances, they just keep servicing it. **! How can they get away with this!

I knew I couldnt be the only one with these problems. The reviews confirmed it. I bought my Cabrio washer in 2012. Energy efficient, no agitator to catch on clothes, Great. It took me a while to figure out that the machine was eating my clothes and not cleaning them at all. Oh, they smelled fresh. That HE detergent smells nasty. The machine ate the edges off my good towels, T-shirts, jeans. Brand new underwear (thick elastic) was stretched all the way out and pulled. Normal stains and dirt do not come out even with pretreating. I started running my clothes on the delicate cycle, prewashing stains in a bucket by hand and then putting clothes in mesh bag before running the load. They still came out dirty and ruined. When I run the loads, it still registers as not being that energy efficient on the controls. Id gladly trade it back for my old washer. I feel like I have stepped back in time to a time where you washed everything in a tub or bucket. What a waste of time.

We bought this product and had only had it for a couple of weeks when I spilled soup on the open microwave door. My mistake, but I would think that might happen to other people once in a while. The soup leaked around the window gasket of the microwave and streaked the interior of the door. It also ran down into the door of the oven and streaked the interior of that door. No way to clean this up that I know of without taking the door apart. I think these gaskets should not allow liquid they leak into the inside of these doors. Whirlpool says its my problem. They call it a use and care issue. I think its a design issue.

This washer is a piece of junk!! It doesnt use enough water to clean the clothes and now it wont spin them dry. I have maybe two loads a week on a regular basis. I have always used HE detergent. Never overload. It is only three years old and I have been having to go to the laundromat because I cant afford a service call and especially if it is what they say which costs almost much as the washer. Be ahead to buy a used washer or a cheap one. It wasnt getting the clothes spun out dry enough - dripping wet. Then it flashed od and ul and sd and f51 and then it kidnapped my clothes - couldnt get the door to unlock with the pause or power until I unplugged and still had to wait several minutes. They refuse to help. Do not buy this machine!!! The customer service was not one bit of help. Instead she wanted to charge me $350.00+ dollars for some plan.

Have owned my Whirlpool washer model# LSR 701 0PQ1 two years and had no problems with it before today... The washer was used once a week since I purchased it and only myself use it. There is only myself and my son and our loads are always small. Well today I put a load in and went to finish my other housework and when I went to check on the load, there was a weird smell in my laundry room. As I approach the washer to put softener in the rinse I saw a flash behind on the left hand side of the control panel where the size of load and water temperature selection is. I unplugged the washer and put the fire out. Have never had anything happen like this before with this brand. I already know I have to buy another washer but am scared to get another Whirlpool.

We use a Whirlpool Washing Machine and it is one that came with this apartment provided to us by our employers. My parents had a Whirlpool Washing Machine too and they have had no problems since I have known them to use a Whirlpool. The Whirlpool that we are using has been very reliable in the past 3 years we have been using it. No issues whatsoever! The clothes do come out clean, so it does it's job! It is a top loading washing machine as opposed to the newer front loading ones. I have not used a front loading washing machine, so I do not know how it compares to them. The settings on our Whirlpool are basic and very easy to use. (If you know what you are doing, of course). LOL! Reliable is the word for Whirlpool!!

I have a Whirlpool 33 inch wide Side by Side refrigerator. WRS311SDHM. This is the worst refrigerator I have ever had. Temperatures are inconsistent. It is less than a year old. Initially, I stored the big container of spring mix lettuce on the bottom shelf of the refrig as it wouldnt fit in the crisper draw. The temp setting in the refrigerator was set to ideal. Oddly though, in the freezer, ice cubes were melting and refreezing creating a massive frozen block. So, I raised the temperature in the refrigerator, but kept the freezer at coldest. However, I noticed that when I set the refrigerator to a warmer setting, ice cream became cold soup despite the coldest setting.I called Whirlpool and a service technician from Georges Appliance in New Providence, NJ came to my home (of course I had to take half a day off from work). He stuck a thermometer in the freezer and said, its working fine. While at my home he called Whirlpool who said that if lettuce isnt kept in the crisper drawer it will freeze (silly woman, dont you know that?) and ice cream will get soft in the freezer if the temp in the refridge is warmer than ideal. So, it seems I can have lettuce or ice cream, but not both. Okay, so I put the temp back to ideal, bought smaller packs of lettuce that would fit in the crisper draw and called it a day. Nope....lettuce and anything else in the crisper draw freezes too. Wilted, soggy lettuce is so nice in a salad and frozen baby carrots can break your teeth.I have been on the phone with Whirlpool executive dept several times. They offered to have another service company come out to look at the refrigerator. This repair company would not give me a 4 hr time frame until the day before the actual service call. This might be okay if you work from home or are retired, but this is not my case. I opted to not have them come. This is my last Whirlpool product. Since KitchenAid and Jenn Air are owned by Maytag/whirlpool, my other options are LG, Samsung, GE or Sub Zero.

The Whirlpool washer and dryer I bought new four years ago has been nothing but a giant on-going headache. No end to the error codes for washing machine. The dryer knobs broke off after two years. The washing machine works only when it feels like it, and important pieces that get a lot of wear are made of plastic. I will never buy Whirlpool again. Ever. Good luck to anyone that is brave enough to buy Whirlpool appliances. I have to say it again: Whirlpool is garbage, junk and unreliable.

We bought Cabrio washer & dryer a year & half ago, and I hate, hate, hate the washing machine. Every load, it goes off balance. And you have to stop your other work, unlock & wait awhile on that, and rearrange your load of clothes. I called the repairman when I first had it, and he said, Oh yeah that happens, nothings wrong. OMG! How I wish I had returned it. If you dont rearrange the load when the cycle is done, your clothes are still soaked. So you have to re-drain & spin. Total waste of money & a lot of my time. Very very dissatisfied and will never buy another Whirlpool product.

We purchased this washer on 2008-04-27. It ran okay until a few months ago when it began making strange intermittent noises. This is now happening more and more often. I reviewed a lot of websites and see that this is a common occurrence for Whirlpool Cabrio washers, and Whirlpool will not stand behind it and make it right. Im going to write them a letter mirroring what Im saying here, and remind them that other appliances in my house are coming due for replacements or upgrades. Whirlpool and its affiliates will not be part of those upgrades going forward. I have no patience or tolerance for expensive **, which is what they put out here. I will have to purchase a replacement washer since this seems to have two major areas of failure, both extremely expensive to repair. I might check out Roper and see what they have--its apparently very well rated by the folks that work on these things.

The side-by-side with the lower freezer was one of my all-time favorite units Ive ever had. The capacity of the interior was expected to be better, particularly the freezer, but it was effective in getting to the items I needed. Storing was good, but the freezer had trays in the upper portion that I could see when looking down, as Im over 6 tall.

I purchased a 50 gallon Whirlpool water heater, model FG1J5040T3, in November, 2005, and have had the same experience as reported by the hundreds of others, whose comments I have been reading. Basically, pilot wont stay lit. I called Whirlpool, relight the heater, when it doesnt relight, wait to receive repair parts, call a plumber, and pay to have them install it, then repeat same problems. Each time going for a week or so, without hot water.After relighting the heater 10 times in the past year, and service calls, Whirlpool authorized me yesterday to return it to Lowes, and get a replacement. I need to hire a plumber to unhook it, haul it to Lowes, get the new one, and install it. It cost me about $300 to $400. Will the replacement be any better? I am considering just replacing the heater with one made by Rheem.

Purchased new from Best Buy for over $1000. One or two months after the warranty expired the ice through the door malfunctioned, would only spit out crushed all over the floor then clog up. Didnt bother to repair it, just open the freezer. Next, the door would not seal right and frost builds up in my frost free. Also, the ice delivery wont close tight. Now the unit is about 3 years old and I just finished paying it off and all the door shelves are cracking. Contacted Whirlpool and was told by email politely, Too bad. You are out of warranty, but please buy parts from us and say nice things about Whirlpool because we so value our customers. Never will buy Whirlpool again and recommend you DONT.

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

High end Whirlpool dual front loader washing machine model number WFW94HEXW2 died after 5+ years of less than moderate use. Used no more than once a week. Paid for a top end model. Had 2 mechanics look at it. Mechanically it is fine. The CCU is not working correctly and wont allow it to start. We replaced it, but to no avail. It is barely out of warranty at 5+ years old. Called Whirlpool and they said they would do nothing. Asked for a manager and she was rude to add insult to injury. Cant get to the serial number because the door is locked shut as part of the shutdown problem. Cant find original receipt so including a picture of the credit card purchase. Trying to contact retailer but so far have not heard back from them.

I purchased this machine in April and already, the right leg is rusted and the under seam of machine is rusted. I have throw rug under it and where the leg is, there is rust on the rug. I called service from Whirlpool and 2 servicemen came out. The first one told me I was loading it wrong and the water was splashing over the inside tub to rust the leg and I asked, So why is the seam under the machine rusted? No answer. The second one came out and told me he could not find anything wrong with the machine and doesnt know why it is rusting, but he never gave me a paper to sign off on. He also said that maybe it was rusted when it was delivered. Not!!! Then I call P.C. Richard in Watchung, NJ where I bought the machine at and told them about the problem. They sent a serviceman out and he said that the bleach condensation is causing the rust, its known fact that this machine has this problem. He said that the water does not run through the dispenser but there is a model that does. I want a credit on this machine and get the upgraded one. It states on the machine that I can use bleach but it doesnt say it will cause rusting. I want you to tell me how a 9-month-old machine is rusted on one leg and the seam underneath is also rusted!!!! I had a machine for 10 years and it wasnt rusted. I am very unhappy with this product and with the customer service of Whirlpool. This is my first Whirlpool washer and I would not recommend this washer to anyone. I paid $600.00 for this washer and it should not be rusting.

I bought a Whirlpool fridge in 2014 and started having problems a year later. It was making really loud noises and the fridge part wasnt working. All the food was warm. Of course there is no warranty on it after one year. I called a repairman and he said that the doors dont seal properly so the warm air is getting in causing condensation which freezes the engine/fan which is the cause of the loud noise. The reason why the upper fridge is warm is because the fan pushes the cold air up from the freezer, which of course wasnt working. Then I noticed that the frame at the bottom of the fridge is bending causing the freezer not to seal properly which would be the reason for warm air getting inside the fridge.

I am writing due to the defects and flaws in my recently purchased appliances. I chose Whirlpool believing I was buying the highest quality for longevity purposes. Every appliance I own is Whirlpool or Maytag - same company. I purchased warranties and was told the warranties dont cover my issues and was basically brushed off. I am infuriated. Here is a list of complaints. Refrigerator is cracking on the inside on the inner door and at the bottom. These cracks surfaced within the first year of purchase. The warranty does not cover cracks in the inner body.The oven/range has an exhaust that bellows out of the top of the range in a way that the smoke curls up onto the panel and discolors it. I have never had an oven constructed with an exhaust pipe in the front that pours smoke onto the range itself and into your house. The dishwasher paint has rusted off on the door as have the screws on the inside of the door. The cover panel on the cleaning dispenser of the washer has popped off and cannot be popped back on, hence the guts of the dispenser are always visible and when I go to load the cleansers the front has to pulled out from inside the dispense.The refrigerator is also leaking from the bottom and the ice-maker no longer produces ice. This started off and on for the past 2 years. At first I thought the leak was from a near by window. No it is the refrigerator. All of these appliances were purchased in 2013, 14 and 15. New. I am 56. I have never had issues like this ever in my life growing up or as an adult. Appliances lasted forever. I am one person. How much damage could I do? None.These are flaws in chemical compounding of the paints and materials for cracks and rust. Whirlpool was called various times and was not interested in sending a rep to verify my claims. They said all of my warranties did not cover such issues only motors. Lots of many spent in vain. I will not purchase Whirlpool again as they seem disinterested in customer satisfaction.

We have a new home with a Whirlpool gold refrigerator that has been fixed twice in 3 years for not cooling adequately (over 45 degrees), a dishwasher that the mother board has gone out twice with 3 different service calls (repairman recommended trashing and buying a new one), microwave that is rusted out on inside door below glass, and washer with horrid smell if you dont wash with bleach weekly and dryer whose sensor doesnt sense anymore after 2 service calls!!! I cannot believe the poor customer service and lack of responsibility the company has taken on these not inexpensive products!! Like others on this post they will not acknowledge problems and tell me I should have bought extended warranty. I am so angry - there should be some sort of law that allows recourse for such bad behavior!

We bought this washing machine from Lowes 5/15 and from the beginning have noticed that clothes especially dark fabrics come out of the washer with white fuzz or sediment on them. They need to be washed again and the fuzz isnt removed with a lint brush. I called whirlpool and they told me to use fabric softener. I dont like adding chemicals to my wash due to a skin condition. Lowes say they have never heard this complaint but clearly others have experienced this problem from the above reviews. Dont buy this washer. It doesnt clean your clothes. The only thing the customer representatives from Whirlpool wanted was to sell me an extended warranty. Why would I want that when the washer doesnt even clean clothes?