Our Whirlpool Cabrio washer is 2 years old and also sounds as if its a jet on the runway preparing for takeoff. The spin cycle started this about a month ago. It is so loud now. It is just SCARY. I am so angry! No recall??? seriously???!!! Rip-off. I will NEVER buy anything Whirlpool again!!!

I have been complaining since 2 months after I bought the Whirlpool Cabrio washer. It is the most expensive piece of junk I have ever bought. There is never enough water to thoroughly wash clothes. The clothes always tangle up. The UL comes on all the time because it is unleveled and clothes were so knotted up that I can’t get them out of the washing machine. I keep calling and complaining, but all I get from Whirlpool is that I need to sort my clothes better and not wash all pants together because the legs will get tangled. So, do I wash some of my dark paints with towels just to keep them from tangling up? I don’t think so. I paid $750.00 for this piece of **. It should wash a mink coat for that price. I keep checking websites in hopes that there is a recall on this thing. For sure, though, I will never buy another Whirlpool product after this purchase.

In April of 2009, I bought a Whirlpool over the range microwave, model # MH2175XSB-5. In September 2011, a small piece of the door fell off at the hinge. Pieces have continuously fallen off and now the door is splitting, rendering the item useless. It was purchased at Lowes and I had them installed the item. Two years of service plus installation come to big bucks for a piece of trash.

I purchased a Whirlpool front loading washer from PC Richards in January of 2010. The warranty was only for one year (the washer was new, not used). The model # is WFW9050XW. Anyway, the washer had to be repaired by PC Richards twice in the first year I had it. Once because the belt that makes the washer spin broke, then because the pump got clogged. Unfortunately, when you wash your clothes, your socks and underwear can get sucked into the pump. After that warranty expired, I purchased a warranty from my utilities company (PSE&G). I have had to contact them four times for repairs to this machine. The most recent problem is my clothes are still wet after the washer stops. I actually have to wring them out by hand to get the excess water out. When I contacted my utilities company about servicing the washer, I was informed that if the repair is more than the washer is worth they dont have to fix it. I canceled the repair and now got to the laundrymat. I figured if I wait until the end of the year, maybe the repairs wont seem excessive. I contacted Whirlpool about the problems and was informed that I should have been using a garment bag to wash my socks and underwear in. More or less the person I spoke with made it seem as though it was my fault the machine sucked up my underwear and socks. I, on the other hand, disagreed with her. I told her the washer should have been build so that it would not suck up these items. I was so totally pissed off I ended the conversation. I also informed her that I would not be purchasing any other appliances manufactured by Whirlpool or Maytag as they are affiliated. They obviously have no integrity when it comes to their product. However, I am totally baffled. Why do the Maytag machines work better and last longer than the Whirlpool machines? The washer I replaced was a Maytag. I had that machine for 17 years!!!!

I like the top and the stainless steel finish - its electric and so the inside is a pain to clean. Flat top - burners heat well/oven gets up to temp fast. Cleaning the outside isnt difficult, I use Bar Keepers Friend on the SS and Wegmans on the flat top - for the back black splash Mrs. Meyers - so its 3 products but its also 3 minutes. I live alone and so use is minimal as well. Im not sure Id like it in a busy house with kids.

Favorite feature is the double oven. Both ovens are separate self cleaning. Top oven smaller, perfect for a pizza, cookies, small stuff. Great features for entertains, multiple foods can bake at same time. Ceramic top easy to clean, boil overs cannot seep under anything. I have had this oven for over 10 yrs, minimal repairs.

Why would I, and others buy Whirlpool made washers, with all of these service problems? Now I understand why they have profit/loss statement problems, and stock prices in the pits.

Installers left and Home Depot Cabrio washer stopped with water left in tub. I reset GFIC outlet, tried again and it stopped. Did some research and tried different outlets. Same result. I discovered that if you shut off machine as soon as the GFIC is reset, then the washer will drain no matter what. I have been on the phone with Home Depot and they have no solution but to wait one week for a repairman. Very dissatisfying service. Now I am running a 20 foot, 3 prong, heavy duty extension cord into living area where there are no GFIC outlets and it has been running. I believe there is a fault in the washer, but they must not care if we get electrocuted from the faulty grounding of their Whirlpool product.

We decided to upgrade to the Whirlpool Cabrio Elite set after 20 years of having the same washer and dryer. Yes, they were still working after 20 years, but we wanted the bigger and better and shinier appliances when we bought our new house. The dryer is fine. Dries a load in 38 minutes. The washer is a regular POS that never should have been put on the market. The best thing about this washer is that it has a transparent lid that allows you to watch your laundry getting dirtier as it washes.Its less than a year old so I havent had the problems with the bearings and such yet, but as far as cleaning, it DOES NOT DO THE JOB! My blacks have white residue on them EVERY SINGLE time I wash them. I end up washing/rinsing/rinsing my darks which definitely defeats the save water function. A regular load takes an hour to wash, and then another hour to rewash, which definitely isnt time saving. My whites are grey and often come out with the same dirt on them as they had going in. Im talking about dirt that you can scrape off with your fingernail, which tells me that they arent even getting wet, nevermind washed.The large capacity is a myth, since-- as per instructions--you can only line the dirty clothes around the centre hub without covering the little silver bump in the centre, or else the clothes wont come clean. This wastes a large amount of capacity. In a nutshell, your darks will come out dirtier, your whites will come out dingier, you waste more water from rewashing, you waste more time and electricity due to long wash cycle and rewashing. I will never buy another Whirlpool ANYTHING again.

Have an old Estate by Whirlpool, still going, no problems, washes well. I can control the wash by adding more water, stopping it and restarting it. There is nothing like the old washing machines. I have seen and used the latest and greatest, but they cannot compete.

I have 2 rent houses. I purchased 2 Whirlpool gas water heaters with a 6 year warranty, from Lowes in 2010 and 2011. The warranty just expired on 1 and almost expired on the other. I read the reviews and decided I would not spend my time to get a part, I did not want to put any more money into a bad product. Both water heaters leaked at the Honeywell gas control valve without any warning and flooded both properties. I replaced these with Rheem gas water heaters from Home Depot.

I am writing this complaint because of the very poor service of Whirlpool. My washing machine broke after 1 year of use. Luckily, I was on my 2-year insurance. The wiring fully collapsed and I needed to change the whole drum. I called Whirlpools customer service and they said that they would fix the problem after 2 weeks. They came on the day and found out the problem and ordered a new drum. They said they would fix it up on the 5th of December, and it has already been over 3 weeks. On the 4th of December, Whirlpool called me and said that the item they had ordered for me has been damaged. I am not satisfied by these products because it is only a drum (it cant break that easily). I cannot recommend this company to my friends and family due to the quality of the products and the poor customer service as I was waiting on the phone for almost an hour trying to get through.

Whirlpool Cabrio Washer WTW7340XW sounds like a small jet during spin cycle. The Whirlpool Cabrio Washers have a very well known and well documented problem with the tub bearings failing. Many many disgruntled owners have posted their complaints online, and there are many videos showing the issue on youtube. This issue is so prevalent that the manufacturer has created a tub bearing failure repair kit for $350. The repair is so expensive and labor intensive that many of the certified Whirlpool repair shops no longer work on the Cabrio washer stating that a better washer can be purchased for the cost of this repair.That said, the manufacturers customer service group denies that the Cabrio tub bearing failures is a common problem and are quick to state that Whirlpool holds no liability for this problem. Ramping the complaint up to a customer service supervisor is met with the same canned response. Regardless of the thousands of complaints Whirlpool is claiming that it is normal wear and tear for the tub bearings to fail. The manufacturer should recall the units for this manufacturing defect in the Cabrio design.

Do not buy this washer. It does not get clothes clean. I use extra rinse (that negates the water savings) and still clothes comes out with stains on them. Some clothes are not even fully wet when removed after washings. I find myself soaking and pre-treating many items. White socks and undergarments are grey soon after buying. I always liked Whirlpool washer and dryer products, but this is a very poor product.

I purchased my water heater at Lowes and had it installed professionally. I suspected something was not quite right on numerous occasions because the hot water recovery time seemed excessive. I finally called Whirlpool and they gave me the names and numbers of two companies that were on their list. The first asked for the model number and normal information and never called back. The second showed up spent five minutes charged me 78 dollars and said they could not get the part (gas valve) I needed. And if I could get it from Whirlpool they would charge me 250 to put it on. They also said Whirlpool made horrible water heaters and I should save myself the trouble and just replace it. I have since heard from additional plumbers and the gas company to stay away from Whirlpool. I did have the water heater replaced. When they did it and they drained the old water heater it had so much sludge in it draining it was very difficult. The sludge is mystery since I have a softener in my home and it should have prevented that. The individual from that gas company said that was just one of the many issue others had experienced with these heaters.

This stove was in my house when I bought it. It has a glass top on it with marks for each type of burner below. There are a couple of different size burners which makes it very useful. The only problem is with the glass top feature. It gets marked easily even when you try to be careful and many of the marks will not come off with anything I have used. The marks are so prevalent that I would never buy another one.

GX5FHTXVQ03 - Our whirlpool refrigerator/freezer has been leaking from the freezer for a couple of years (purchased in 2011). An ice sheet builds up in the freezer unit, then leaks out. We have gone through countless attempts to defrost and correct, disconnecting the ice maker, and a replacement part that accomplished nothing. I see online numerous people have experienced this same problem. It appears to be a design defect. Made another call to Whirlpool today. They are willing to schedule a service call for us... at our expense. Gee, thanks! Hey, but they are sorry about our warped oak hardwood floor. That sure makes me feel better. WE WILL NEVER BUY WHIRLPOOL AGAIN!

12 months and 2 weeks, my ice maker quit working. I called Lowes where I purchased this top of the line junk. The first thing they asked was do I purchase the extended warranty. I said no. He advised to call a repairman he recommended, but I would have to pay for the repairs. Whirlpool was just as bad; no warranty, you pay. It appears they are both relying on warranties rather than selling dependable products or customer satisfaction. A couple months later, ice forming on the bottom of the freezer, and puddles every couple of days in front of the refrigerator. I pulled the two draws out and removed the ice. Within a week, it was back. A $2400 refrigerator should last longer then a 1 1/2 years without falling apart. My Whirlpool dishwashers only lasted 1 1/2 years also.

We purchased a Whirlpool Range from Brands Mart USA and did not try to use it for quite some time because our house was not ready to move in. When we tried to turn on the oven it would not come on. We called a repair service and was told the Motherboard was not working. We realize the warranty was out on the stove but it never worked and the stove is Brand New. We called Whirlpool and they was going to repair and changed their mind on December 18, 2014 at 8:54 am. Before that call we had spent quite a lot of hours on the phone with Whirlpool and Brands Mart USA.. We purchased three appliances from Brands Mart USA Range, Dishwasher and Microwave at the same time they were all Whirlpool products. What happened to Good Customer Service and Return Customers for Job Security? Well neither Company care for their customers. We did not break a motherboard for a stove oven because the range was never turned on because it was broken when purchased.. We are unable to get any help from either company. I talked today to ** & Supervisor ** from-Whirlpool and ** - Brands Mart USA, again no help. Why transfer you from one company to another for 1 hour and 45 minutes? WISH I COULD GET SOME HELP. And we wonder why companies go out of business - word of mouth complaints and especially with Senior Citizens like us.

Bought this refrigerator in 2018 and ice maker went out 2x, then compressor went out and waited 4 weeks for part. Now the refrigerator is broken again and not cooling. Dozens of other reviews indicate the same issue with this model. It’s clearly a defective model. Customer service in Tennessee are very friendly but my refrigerator is still not working. Whirlpool French door - wrf954cihm.

My 3 year old Whirlpool dishwasher (model GU3200XTXY3), broke down for the third time. Under extended warranty with my insurance company, a repair tech was sent out to diagnose the problem. He quickly found that the heater had been continuously running (not just during drying), which caused the machine to quit working. He also found that all the wiring inside the dishwasher was spliced together, those two things=fire hazard! Because the heater was always running, it was super heating all the water used to clean the dishes. The vent to release the steam is located on the top of the door (right under counter edge). The dishwasher was producing hotter and more steam which slowly ate away at the particle board under the cabinets. No, we dont have the most expensive countertops, but Whirlpool should be held responsible for producing a faulty product with a faulty design. I have contacted Whirlpool and they claim to have mailed a claim form 3 weeks ago. I have not received it. Posted on social media about it, and was told I must only speak with the person who sent me the form. I would love to, but since I havent actually received any contact from anyone (other than a fb post) I dont know who to contact, at what number, or email!

We purchased our a model WTW7800XWO 7 years ago. Our lid kept falling down when loading and unloading. Very annoying. 3 years ago it failed to lock down which means the washer will not start. We learned to press down on the lid sides to get it to lock. Then it became loose where it connects to washer and we duct taped it to make it work. We put up for that for a year before having a repairman attach a new lid. 1 year later it did the same thing... And we put up with it hoping it wouldnt totally fail. Today it failed. Since the 1st repair cost 250.00 we decided that we will get a new washer rather than spend another 250.00. We will go with American made Speed Queen. We have had Whirlpool appliances since we were married 50 years ago.

Bought a dryer (wgd9050xw) 3 years ago. We bought a more expensive one than we had originally picked out. Every year its had to have a repair of same part. First year it was under warranty which tried to bill me so I had to dispute the charge. Charge was finally dropped. We just had it fixed again for third time in 3 years. Its a fire hazard because belt wears a pulley and basically melts it and gets belt hot. I just contacted Whirlpool and awaiting response.

I bought the Whirlpool Cabrio topload washer (WTW7800XW2) in April 2011. In May 2012, I noticed the door was broken on both sides. It has now popped up and is broken so bad that it can barely be used without replacing it. I called Lowes, where it was purchased, to quickly be told that there was nothing they could do because it is out of the years warranty. This is just such a copy out to have an excuse, so that they would not even offer any assistance. Also, I paid $2,000.00 for the set; I bought the dryer as well. I just could not imagine an expensive machine like this having such a problem. Prior to buying this machine, I had my washer for 10 years. It has no problem; it was just time to buy a newer model, so I thought!After the store (Lowes) would not help, I decided to call Whirlpool; and the woman I spoke with was even less help. Andrea said there was nothing they could do since it was outside the year of manufacturers warranty. She seemed glad to have this as an excuse. I told her this is too much money to have something like this to happen. I told her it is obvious the door was defective. She said again sorry but that theres nothing she could do. She did offer to sell me a warranty for a year for $327.52. This was too expensive. I asked her what else could she do, and she told me nothing. I asked how much the door was, and she told me $212.00. I feel like I have been royally and deliberately ripped off, and Whirlpool knows it. I say to anyone reading this to please be aware if you are purchasing this product. You will most likely be sorry you invested all this money for it. You will get a companys brand that does not care and will not stand by their product.

My whirlpool refrigerator relay switch caught on fire and customer service told me that my model wasnt on their list of problems refrigerators, but they know there are a lot of units out with the chance that it could start a fire if anyone has a whirlpool product refrigerator. I would call 1-888-923-8502 and check to see if it is on there list to replace the switch.

As soon as we bought our new microwave, I saw what appeared to be hair on the door. I tried to scratch it off but I could not so I wondered if it was a crack but I could not feel it. As time went by, many other lines appeared but I could not feel them, just see them. After a couple of months, I noticed the first crack could be felt and then soon after that I could feel the other cracks. The first crack goes from the glass to the edge of the door and is wide open and the door edge kind of just hangs there. There are now about 20 cracks and the door will most likely fall apart soon. I called Whirlpool and they lied and said there have been no complaints at all about their doors. I read them some of the names here on this site having the same problem and the best they can do is offer to sell me a new door for $180. I told them that their product was defective and need to be recalled or something and he again tried to send me to the parts department to sell me a $180 door. I told him if that is how Whirlpool treats their customers, I would no longer buy anything from them.

I purchased my Whirlpool Gold Series refrigerator from Lowe’s in Rockledge, FL. This was my third purchase after returning an LG Refrigerator as well as a Samsung refrigerator for having multiple defects! My Whirlpool Refrigerator purchased June 2014 has motherboard replaced that showed obvious evidence of factory board flaws when boards were manufactured. Top mounted ice maker drips so much water it fills my veggie draws with water ruining my food. Mold is present inside my ref now from constant leaks. Drawers were replaced by tech also due to ill-fitting design during first few months. Water will not dispense in door after one year, gave up using it. This is a horrible and very expensive appliance wrought with POOR DESIGN FLAWS. WHIRLPOOL does not care about its consumers. Their engineers must be some of the worst in the world. Our old 70-year-old kerosene powered refer in the Bahamas is still making ice, yet most modern day refs are like buying cheap home computers that constantly need service to keep them running. It’s a lifetime investment with $89 first service visit to determine problems then weeks of waiting for parts and second visit for the repair to be completed until next electronic malfunction. DONT BUY A NEW WHIRLPOOL APPLIANCE. WAIT AS LONG AS YOU CAN FOR ALL THE CLASS ACTION LAWSUITS AGAINST WHIRLPOOL & Kitchenaid to play out.

Bought a brand new 40 gal water heater from Lowes. Installed it and it worked fine. Next day no hot water... After doing all the tests with tech support. This smart mouthed CSR explained to me how her uncle is a master plumber and she knows what shes talking about. Still couldnt tell me what was causing it to not work. Other than the reset being tripped. I have had good luck with Whirlpool products. But customer service has always been poor.

Our burners broke down just 3 months after having purchased a new Whirlpool stove. Then a week later the oven broke also. I want my money back now. Do not purchase any Whirlpool products. Theyre garbage.

I bought a Whirlpool over the stove microwave. It was to replace a GE that was over nine years old. 40 days after purchase and installation the plastic started chipping and peeling. I contacted Whirlpool customer service and was told that it was a cosmetic problem and my warranty stated that I had thirty days of warranty on cosmetic problems. This was a problem because chipping and cracking didnt happen within 30 days. The chipping and cracking continued to get worse. I again called customer service because the warranty stated that workmanship and bad parts were covered up to one year. I was told that because it was over my stove that this was to be expected. I thought this was a dumb answer because had I known that an over the stove microwave would have problems from cooking I would have installed it in my living room over the television. I called customer service several times. One of the times I called I talked to a representative who actually acted as if she wanted to help me. She suggested sending an e-mail with pictures and gave me an e-mail address. I did this and got no response. I was getting close to the warranty expiration date. I called again and was told that pictures wouldnt work; I would have to pay to have a serviceman come out and write a statement saying that it was not cosmetic. The cracking and chipping is so bad that I cant clean parts of the door because the cloth or sponges catch on the cracks. The door on the GE microwave did not look as bad after nine years of use as the Whirlpool does after 1 year and 8 days of use. I am not the smartest person in the world but I know the difference between poor quality material and workmanship as opposed to cosmetic problems. Im pretty sure that if my wife put her makeup on and pieces of her face started cracking and falling off she wouldnt want to hear that it is not a real problem its only cosmetic. Bottom line is I am very dissatisfied with the poor customer service and warranty problems I have experienced. I will not buy another Whirlpool product and would strongly suggest to others to buy any brand but Whirlpool.

Even with the hottest water on the most heavy duty setting, regular dinner plates are not cleaned. The flatware holders that are set in the door (instead of free-standing in a rack) do not have adequate holes in the holders and are too far away from the limited jets to get adequate soap and water to cleanse the flatware. Even after rinsing all scraps off the plates and flatware, we find bits of food, gravy, or smudges on the plates and flatware - since its first usage. The manufacturer had the audacity to claim that was normal. Settings include delayed starting, heavy duty versus normal washing, and different types of drying. The heavy duty washing is definitely poor quality, and there seems to be no difference between any of the drying settings. The delayed start is nice. The physical layout of the prongs on the racks and the folding racks do not allow easy fit for most sizes of pots plus plates on the same bottom rack. I cannot put a 1 gallon pot level on the same rack as dinner plates. I must put it beside salad plates. Only small sauce pans fit neatly or cleanly beside dinner plates. Yet the external dimensions of this dishwasher are the same as the competitors standard size. Looks neat and is easy to clean. Also, the exterior does not show scratches. Actually, I cannot see where the exterior has any scratches. The service people were very little help. The Warranty said that after five (5) service calls the unit would be replaced. We made six (6) service calls, but we were told that we did NOT have six because if you called again within 90 days of a call, that was considered the same service call. That requires 450 days minimum to have five (5) qualified service calls, but that warranty was good for only 365 days!

Within 5 years, this is my experience: A broken brand new Whirlpool fridge after 6 months of purchase; a broken oven that needed repair after 1 year, and today, the oven door just shattered in pieces after I heard a loud noise from the kitchen, almost injured the kids. And guess what, I just returned a new Tilt-Head Stand Mixer KitchenAid that wouldnt stay in place; the head keeps on tilting and would not stay locked. After being on hold on the phone for almost 3 weeks for a return, I found out it was a Whirlpool brand family. This is horrible, I would suggest to never buy the Whirlpool brand; their products are a real nightmare and their customer service is not reliable. If you do buy from them, expect unreliable products and very long long wait periods on the phone.

We have had this washer for a year and the longest it has run before breaking down is 3 weeks. Since it takes longer than that to get a repairman out to look at it and another 2 to 4 weeks to get parts, it has run less than half of the time we have owned it. This thing is a hunk of junk. Dont ever consider purchasing one of these lemons.

I purchased the Whirlpool touchscreen gas convection range and I do not recommend this product at all. The oven cannot operate without using the touchscreen to set the temperature and it has a mind of its own. Woke up in the middle of the night and the oven turned itself on to 550 broil. I called Whirlpool, they sent a tech out who replaced the touchscreen and the same problem is happening. Not engineered very well. The range would have been fine without the touchscreen, if only it had an old fashioned knob to set the temp. I do not recommend buying this appliance.

We bought a Whirlpool model WFW5620HW front-load washer at Lowes. The unit shook so violently during part of the spin cycle that the Whirlpool-authorized service company technician said not to use it while parts were ordered. It seems the balance ring was not functioning. Parts ordered were shocks and tub assembly. The technician suggested trying to get a whole new unit, as the repair is so intensive he had only done one or two in his career.Whirlpool customer service said they would not replace the unit, and an escalated request had the same response. I think this is terrible customer service - when there is such intensive failure in the unit, they should provide a brand new machine. The work has not yet been done - we are without use of a washer for an unknown period of time, since the order of a tub assembly is so uncommon that they do not have a time estimate. Needless to say, we will never buy Whirlpool again, and suggest you do the same.

My range is 2 years old. I would never recommend this range. The AquaLift clean is worthless. Can not get the grease splatters off. If I could afford a new one I would get rid of this range. The AquaLift clean feature is only good for small messes on the bottom.

Watery body from all the refrigerator side since 9 – 10 months and complained to Whirlpool 2 months back. They changed the thermostat 2 times but no use. Problem same. Please help. I complained during the last warranty days. Please let me know.

In 2013 we thought that we bought a 30 cubic foot refrigerator model no. WRF989SDAM from Appliance Direct, Melbourne, FL. Months later we realized that it was only a 27 cubic foot unit. Two months after the warranty expired the unit started failing. Called the dealer and was told that they would have the service department to call us. Never heard from the dealer again. Finally I called an independent service company. After testing the unit the technician told us that the evaporator may be leaking. They offered to replace it for a price of nearly $500 with only a 90 day warranty. Realizing that it would work at least 90 days after the repair regardless if that was the problem or not.I decided that we did not want to spent that much money. Having refrigerator experience in previous years, I decide to add a piercing valve and adding refrigerant. Every few months I have to add refrigerant to keep the unit going. This unit has run nearly all time since the delivery. Corresponding with Whirlpool is somewhat like throwing a bottle in the ocean. I also noticed that Whirlpool has dropped the price of this unit quite a lot, must be to loss of customers. And yes I am 83 years old and handicapped and never had a problem like this to affect me so much.

Purchased a house and old owners left an almost new one with house. Thing does not clean even minor soiled cloths. Plan on buying new machine directly and it will not be a GE or Whirlpool. I can see why they were willing to leave the new washer. I left a 15-year old Maytag at my old residence (wish I had it back).

Washing clothes is a nightmare. I am constantly removing clothing from the washing machine that have been torn and left with holes. I am utterly frustrated. Because the machine is more than three years old, there has been no solution to my problem. I have now replaced clothing items in excess of $2,000. I am always here that they will send a repairman and yet there is still the problem. This machine is costing me too much money. The newer machines have fixed the problem. There is no gap between the drum and the doorway or rubber piece. I want that piece to stop this nightmare. This machine has taken a dream of mine and demolished the experience. I hate washing clothes but more so having a machine at home and then going to the laundromat to stop the chaos with doing laundry at home.

I have not use wash machine for 46 years, however, since I the caregiver for my wife (with Parkinson), Im the user of our washing machine, High Efficiency Whirlpool for 8 months. It Is very easy to use including the dials. It is very efficient to use.

I bought these products 2 1/2 years ago along with a dishwasher and Microwave, all which are Gold Series. The first month my Microwave broke. Instead of a certain part that they used to use, they now use a Capacitor instead and it broke. The repairman fixed it under warranty, but told me Ill be seeing you again. Then, my oven occasionally says Function not available. Whirlpool wont tell me what the problem might be and they have nothing for troubleshooting this problem in their manual. My only solution is to reset the circuit breaker and then it works for awhile. Now, My refrigerator has ice building up at the bottom of my freezer and leaking all over my floor. I found a Whirlpool bulletin online which explains that this problem is because of a defective part (Grommet) and that they have a replacement part for it and you can get it by calling their customer service department. Why didnt they send out recall notices to their customers?So, on 8/10/2015 and 8/11/2015 I tried getting this new p-trap part, but for two days now Whirlpools computers arent working and they have no other way of looking this stuff up. Very poor customer service and I also waited for a half hour on the phone to be told their computers arent working. How about putting a message on their pre-recorded message letting customers know their computers arent working?

I purchased an over-the-oven microwave in November 2020 (Model # WMH31017HZ). It worked until March 2021 then began tripping breaker. The Safety department at Whirlpool stated that I have to get a dedicated circuit. After spending an enormous sum to get that dedicated circuit the microwave worked until April when just opening the door caused a spark that the electrician and I observed. By now I am sure that I purchased a defective unit but Whirlpool was not believing it. (As as aside, expect to stay on hold for at least 10-30 minutes when you call Whirlpool).May 7th the serviceman from Guincho ordered parts that was needed to repair the oven. As of May 30th the part still had not arrived. Finally, after multiple calls and excessive hold time, Whirlpool agreed to refund my purchase price and as of this writing on July 26, 2021 I have not received it. In the meantime I purchased another brand microwave and have to look at their defective one until they decide to pick it up. They have lost a customer.

I purchased a Whirlpool washer and dryer from Best Buy. I purchased one on sale that was a great value. The delivery and set-up went well. However, the model I have had a loud vibrate. The drum in the washing machine would wobble and shake across the floor. I finally had to return it and replaced with same model. I experienced the same issue after 30 days. I didnt take the insurance out and I regret that move.

I purchased my brand new gas stove at Lowes in 29 Jun 10. Within the first month, my oven was giving me the error F-2. They came out and replaced the ERG board. Now, just after the warranty had expired, the same problem is happening. When I called them, they told me that I should have purchased the extended warranty. I cant use the oven because I have to unplug the stove every time to get it to stop beeping.

We purchased a Whirlpool Countertop Microwave (model MT4155) at HHGregg on 6/02/2012. (This was a replacement for another oven that failed after a couple of years - NOT a Whirlpool.) On 6/04/2013, i.e., 2 days past the standard 1 yr warranty expiration, the oven went nuts. I was cooking a plateful of baked potatoes on the auto setting. When the potatoes were done, I opened the door to take them out and the oven started to run! WITH the door open! When I shut the door, it stopped. So the only way to get the oven to operate was to OPEN the door. I dont think this is a safe or effective practice. Knowing it was two days past the warranty, I called customer service anyway just to see what they would say. To my surprise, they (I talked to two different people) were VERY pleasant and accommodating, and offered to cover the cost of repairs and even set up an appointment for the authorized repair person, and then called to verify the appt. as well. Great! I was impressed!The repairman showed up as scheduled and seemed puzzled at first, but he dismantled the outside cabinet and determined the fault was in the door switch. He wasnt sure he had a replacement with him, but he did find one, put the new part in the oven, and re-assembled everything. We made sure it worked and he then left. Fast forward 5.5 months, when again I was cooking potatoes (boiled this time. Maybe the oven doesnt like potatoes!). I had the timer set for 20 minutes on 100%. I was out of the room when it quit cooking, but I think it ran for about 6 minutes and then just shut off and could not be persuaded to restart. The clock continued to count down, and all the other bells and whistles still functioned - it just wouldnt cook. Major hassle. The following day, I was looking at it, messing around to see if I could figure out what was wrong, and discovered that if I pushed on the door latch just a little, the oven would run. Well, thats a nifty workaround, as long as you arent doing any more than briefly reheating something, but not so great if you are actually trying to cook something. I continued to do this for the next few days and then suddenly one night it reverted to the first bad behavior - only running when the door was open. I was able to get that to stop, but the following day, it refused to work at all and it is now sitting here uselessly, just a little over 1.5 years old. I want to go buy another oven (and YES - a different brand!) - my SO wants to repair this one, again. After reading the experiences of others on this site, I REALLY cant see the point in repairing esp not if I have to pay this time (which I probably will), and also when it seems to be a faulty part/design causing this problem. I dont have the time or patience to deal with an unreliable appliance, esp one that I use often. I have not tried to call customer service yet, but Im not expecting great things, not this time. Planned obsolescence? Sure makes me wonder.

Whirlpool 2 Cu. Ft. Stainless Steel Over-the-Range Microwave - My wife and I have just remodeled our kitchen and we bought all the Whirlpool appliances, fridge, stove and microwave. We have had them for about 3 weeks now and now the display on the microwave just stop working. I just cant believe this. Its going to be a real pain now to remove this and replace it. Has anybody else had this problem and I wonder if its even covered under its warranty.

This is the worst washing machine we have ever owned. We purchased the Whirlpool Cabrio washer and dryer set at Lowe’s in Loganville, GA on 04/11/2010. Today is 02/22/2013 and the transmission is shot in the washer. It began making an extremely loud and terrible noise during the rinse and spin cycle. We called a local and trusted appliance repairman, and after his diagnosis including estimate to repair the washer, it totaled over $525.00. This is a terrible washer. I will never ever buy a Whirlpool appliance again. Oh, forgot to mention we have purchased four (4) major appliances from Lowes over the past 2 1/2 years in addition to purchases for our plumbing business and wont do it again! Also, Whirlpool couldn’t care less and there is just one complaint after another for the exact same problem online.

2012 1st year water dispenser stuck, would not stop pouring water until I shut water valve off behind refrigerator. Replaced switch under warranty. 1st year bottom mount freezer stopped working, replaced condenser under warranty. Handle coming off freezer door not replaced. Today Nov 5th past warranty date Oct. 21st 2012. There is ice buildup in bottom of freezer due to a duckbill valve that I just found out about... This is junk and I already replaced the washing machine. Now I am going to replace this fridge if I have to have money to fix this out of pocket. Dont buy whirlpool and i think they make the same thing under other brands like Kitchenaid. My fridge was registered with whirlpool and no one contacted me from whirlpool about the problem they were aware of, to tell me that the valve is free and labor was free for first two years. Now only part is free. What a rip off. My appliances were part of the purchase price of a new home from a developer.

Yesterday I purchased this Whirlpool top load washer model WTW4816FW with agitator and we installed it at our vacation home and I started a small load to wash. Yikes, it made noises like a machine that is on its last legs. I knew from washing clothes for 40 years that this is NOT right. We, hubby and I waited and listened to this piece of junk to finish the cycle. Thank god I had set it for a short wash. We also videoed this contraption while it was grinding. I called Lowes and politely told them I was returning it. Thankfully they never had a problem with us bringing it back. (This must happen often.) I go back to the appliance department and decide on a Maytag. I noticed that it looked like the junk we just returned. I stood there and looked up the model number online and lo and behold there was a video of it doing exactly the same noise. It was virtually the same machine I just returned with just a name change. Needless to say we left the store washerless until I can research this further. I then found out that Whirlpool now owns Maytag. Thing is I just bought a front loader Maytag for my main home and it works good. It was a replacement for a Whirlpool without a agitator which worked well too. The YouTube videos seem to be washers with agitators doing this. I just wish I could post the video for all to hear. I guess we are all at the mercy of big companies who dont care if they make a good product as long as they can make it cheap.

Whirlpool Gold GC3SHAXVBOO - Two issues in two years. We purchased this refrigerator online through Whirlpool in April 2010. Almost a year later, a circuit board went. This was repaired under warranty. Our refrigerator was making loud cycling noises and we were told this was normal. Now a year later, again we have an issue. This time its the compressor. We called customer service and were told there is nothing they can do. The cost to fix approximately is $700. This is very upsetting to buy a $2000 refrigerator and have two major issues within two years and then not have the company stand by their product. I would wonder how many other people have this model and have these issues as it seems like a lot. Whirlpool customer service is terrible, non-caring and offered no assistance.

Purchased this oven on 9/12 from Sears, did not purchase an extended warranty and didnt think it was necessary. Im a 64 year old widow and only use the oven on holidays, to date Ive used the over 5 times. With Easter coming, I decided to clean the oven. Followed the instructions, the door locked and the oven died. Im totally disappointed, now it would cost over 100.00 to repair, money I cannot afford. Called Sears and all I was told over and over again that they can send a repaid person and I would have to pay. I was also told that I should have purchased a Kenmore and I wouldnt have had a problem and finally I was told that they couldnt fix it and referred me to whirlpool customer service, who also told me it would cost over 100.00. A 19 month oven should not have died. It should have cleaned the oven and continue to work for many more years. Again, Im upset, angry and disappointed with sears & whirlpool. And dont know what to do. Does anyone else have this problem with the oven, is there a recall?

I just bought a brand new Sterling steel refrigerator not even 2 months ago, and since I got it, noticed rusty spots coming out,and now has spread all over. I called customer care, and they said it wasnt cover under the guarantee,and to buy a special spray out of my pocket expensive to remove the rust. I am Very disappointed with the service I received, for its not even 2 months old refrigerator and it looks like it is old now. In addition, the company didnt offer to send someone to take a look, checking and make sure theres no future problems with my new purchase, and as a courtesy removing the rust free of charge.

I have tried to contact Whirlpool, email and telephone call. Finally someone called me but Customer Service was poor. I asked her to have a Manager call me, but she never did. They also never responded to my email. We Purchased our new Refrigerator 21 c.f. side by side 2 months ago. The ice maker is driving us crazy. It is very loud. There are white plugs on the 2 bottom corners that make the appliance look extremely cheap. I am not happy with this Refrigerator!

Because the Korean appliances are a problem for repairmen, were stuck with a Whirlpool choice. Seems to be a good fridge. Noisier than my Kenmore (Korean). I got instructions from repairman on opening right door first and closing it last. Otherwise rubber wears out too soon. If I put anything on left door opposite ice maker, it freezes, making that shelf useless! We had ordered a Kitchenaid but the installers damaged it.

Whirlpool Cabrio Top Load Washer Model: WTW7800XWO purchased at Lowes 8/26/2010. The lid was broken at the hinge in less than a year and was replaced under factory warranty. Lid falls down and pinches fingers. The second lid broke in the same location in less than a year. Lid falls down and strikes the eye. I’m speaking with repair technicians and researching complaints on this product. It appears to be a design defect that is not being addressed by the manufacturer.

Although we live in Canada, we purchased our slide-in oven at Sears Roebuck in Buffalo, NY only because of the size availability only in the US (actually, the unit was manufactured in Canada as we found out later!). Obviously, this created another problem since the unit was not underwritten by Canadian Electric codes, Sears Canada repair would not touch it! Once installed, it worked great until the first problem with the oven quitting after self-cleaning. It is the second time in 3 years that both the thermostat and the sensor went in this RBS245 slide-in oven. Once the self-clean cycle completes (quite smelly!) and cools, the oven does not operate rendering the oven useless. First time, in 2009, Sears repair only suggested (since they would not do repair on it for reasons stated above) which parts could be faulty: Timer, sensor, thermostat or elements. It was thought to be the electronic timer unit, which was replaced at a $215 (needlessly) because that was OK. Both thermostat and sensor cost $150. Even the elements were replaced, $52. The second time, just a week ago, exactly the same happened. I replaced the 2 items: Sensor and thermostat at a cost of $154 and the oven worked fine again. I called both Whirlpool US and Canada, but no one could/would give any answers why this happens.So far, it cost $600 in parts to repair! This is nonsense from a company that has had good reputation and record. Obviously, that is changing! If Whirlpool cannot engineer a product that works as they say it does, they should close the shop! Reading here, there are others who complained with the same problem. It is time for Whirlpool to come clean!

I had kenmore in long term until we decided to change the brand Whirlpool. We just saw want to updates to change the color. It was good price on special day. I have no problem with the stove. I like there is size of pots from small to large pot of size.

Model WMH1164XWS-3 Microwave - I purchased a brand new home in 2012 with all stainless appliances, within 3-5 months the outside door handle where it attaches at top and bottom of microwave has chipped, so that the screws are shown. I havent had the time to look up the replacement part until just now. Very disappointed in the amount of money a handle only cost.

Terrible wash machine. Some clothes come out having never even gotten wet. The spin cycle ties your clothes in knots so bad you have to machine dry them because the wrinkles are ridiculous. I’m all for saving water but if your clothes don’t get wet, how are they going to get clean? Also can’t do just a rinse and spin cycle. I would rate zero stars if I could. Don’t waste your money on this junk! Wish I could buy an old fashioned Maytag. Those washers were the best!

I bought my fridge in late 2008 and I am already experiencing potentially expensive repairs due to what I believe is a defective design system, of which, consumers are having to bare the consequences for those who collected our hard-earned cash and delivered a lousy product! I saw so many similar complaints about the ice system on this fridge that I am almost positive that it qualifies for a class action suit and settlement. How about a collaborative approach to this since we have all suffered needlessly? Tell me what you think and if you are in on it.

We bought a Whirlpool Cabrio 2 years ago and they are an absolute piece of junk!!! There is only 2 people in our family so its not like we are washing big loads. It doesnt get my clothes clean and the clothes stink. I have followed the directions on cleaning the washer and it does not good. Now my clothes are soaking wet at the end of the cycle so I have to put it on drain and spin just to get most (not all) the water out of them. And when I take my clothes out, they are just as dirty as when I put them in. Called a technician and its going to cost over $400.00 to fix. This is nothing short of robbery!!!! This machine is a piece of junk. I read over 500 reviews on this washer and they all had problems that cost as almost as much as the washer cost to repair. There really needs to be a recall or a class action lawsuit against Whirlpool.

We bought a Whirlpool refrigerator, model ED5LVAXWSOO. Although we didnt need or want the ice/cold water dispenser, we bought the model anyway. We have never hooked up nor used the ice maker/water dispenser. As the refrigerator was powering up upon its initial start-up after delivery, we found that condensation was leaking from the ice maker on the door. Upon closer inspection, we found that the hatch cover was not sealed and actually jiggled around when the door was opened or closed. A service man came, had difficulty with the issue, but eventually said he fixed it. It didnt leak again for almost three years. Then the exact same problem. (Remember, the component is still neither hooked up nor used.) Apparently, the opening and closing of the doors eventually caused the same defect to reappear. Of course, since the warranty has expired, Whirlpool sees no obligation on their part. But the value of a product is not based on a limited-time warranty, but on how the product holds up. This has to be a manufacturing or design defect as it came from the factory broken, and eventually the same problem re-appeared even though there was no wear and tear on the component, as it is not used. These products are much too expensive to begin failing after a few years. I would caution buyers based on the product being delivered broken (wheres their quality control?), its lack of durability even when not being used, and the Companys disavowal of any responsibility beyond the limited warranty period, even though it is a recurrence of the original problem (which to me means that it wasnt properly repaired/corrected during the service visit). Whirlpool eagerly grabbed our hard-earned money, but delivered an inferior product made worse, in turn, by its sub-standard service and lack of accountability.

The machine is two years old. It cost over $1,000 to buy. From the beginning, we have had mold issues with the machine. The entire house fills with the smell of rotten eggs every time we use it. The machine is used daily so it doesnt sit for long periods. Despite all the complaints online about their machines, Whirlpool refused to acknowledge that there is a design problem with the machine. They refused to make any repairs or buy the machine back and their only suggestion was to buy more chemicals from them to use to clean the machine. We have done this in the past to no avail. Oh, they did offer to send out a service company but on my dime. Whirlpool needs to be sued and I only wish that someone would start a class action suit against them. It really stinks when you try and do the right thing and buy American only to have the company not give a crap about their customers or the fact that their product is garbage. About 10 years ago, I had a Maytag front loader washing machine with the same problem. Maytag bought the machine back on a pro-rated basis, no problem, no question. Of course, Maytag is now owned by Whirlpool. Too bad they didnt adopt Maytags customer service policy. I cant wait for them to go out of business - something they deserve.

Whirlpool owned or bought out Maytag. My Maytag Washer (purchased a dryer also) was a disaster from day one. The previous set I owned (Maytag) was 20 years old when I decided to replace it. From day one, the washer literally walked across the floor while turned on (Maytag Performa). I had to sit there and virtually hold it down if I wanted to get my wash done. I called and called and they would eventually come out only to tell me that this was a substandard product from Maytag and I had better buy the extended warranty. After only 7 years, the washer completely stopped working and the dryer (Maytag) is falling apart. I purchased new Samsung washer and dryer and I absolutely love them. So you whine all you want about Samsung underselling you. I contacted you several times and all I received was lip service. I will never purchase a Maytag or Whirlpool washer and dryer and I’ll let all of my friends know about your terrible customer service!

I work on Whirlpool refrigerators for a living every single day of my agonizing, miserable, lousy life. Ive never seen such a mass of dysfunctional, defective rejects as I have with the new Whirlpool side-by-side refrigerators. The ice maker never works because the water line always freezes in the door. The food in your refrigerator side will either spoil or freeze because the damper door will stick open or freeze shut. The water filter housing will start leaking before you change the filter for the first time because of the inferior quality of the plastic its made from. And of course my all time favorite the compressor will always go out under the first 5 years (Thats why Whirlpool changed the warranty from 5 years to 1 on the sealed system). Ive never been a big extended warranty believer. But, like old saying goes, They just dont make them like they use to. Definitely applies to Whirlpool refrigerators.

WHIRLPOOLS unacceptable customer service! Less than one year ago, we bought a Whirlpool dishwasher, type ADP 4411 from Khoury Home, Lebanons leading retailer of household products. From the beginning, we were not really happy with the performance of the machine, which we felt was not cleaning as well as it should. But the nightmare for us came when ten months later, we came home to an electricity burning smell and smoke from our Whirlpool dishwasher, which had been off. Thankfully, our electric security system in our new apartment worked very well and shut off, so that our apartment didnt catch fire. It was a shock, but knowing that our machine was still under warranty, we contacted Whirlpool to let them know what happened. The bigger shock came when the company told us that the electric board is burnt probably because of high voltage when the electricity came too strong one time and that we have to pay for a new board $190 because such cases are not covered by the warranty! A Whirlpool manager said because the electricity in Lebanon is unstable, we should have unplugged the dishwasher whenever it was not in use - but its not really logic- the same thing can happen while it is in use (and of course nobody told us about it when it was installed)! We, like other normal people, do not unplug our appliances when they are not in use, and we are using in our kitchen a lot of other electronic appliances without any problems.The fact that Whirlpool is blaming us for a fire that could have had much more dangerous consequences is absolutely unacceptable. Unfortunately too late, we have read at the internet a lot of customer comments with these kinds of problems with Whirlpool dishwashers too. At last we got a $20 discount (!!) for the new board but on the service letter they wrote just that it had smell problems. Nothing about burning! A burning dishwasher should be for Whirlpool company a much more serious theme! The way it was handled is NOT a customer service, NOT an international service for a big company like Whirlpool and especially really NOT the customer service of a U.S. company!

In July 2012 we purchased a new Whirlpool Gold refrigerator. Last month ice maker went out. We bought it at Best Buy. They sent out a third party repair co. subcontracted under Geek Squad. Response was same as all these threads - just have to replace it. Since Whirlpool does care why dont we all go after place we purchased these refrigerators or the suggestion of a class action suit works for us! This is absurd!

Had this model (WMH73521CS-6) installed as part of kitchen remodel. After 8 months, microwave is failing, indicating door needs to be opened, then closed to operate. This does not fix the issue or reset the condition. AND, there is no way to reset the microwave electronics, not even power cycling (unplugging and replugging from/to electrical outlet).

I like Whirlpool, but the ice maker never worked right. Now l have to clean the ice off the dispenser about every three days. Other than that has been good. This is my third Whirlpool refrigerator.

I purchased this Cabrio top loader washing machine (model #WTW5640XW3) after I had a Kenmore front loader for 14 years with not one problem. I bought the Cabrio thinking it was good for the price. Well, let me tell you first of all, I dont like the no agitator. The salesman said it was a big seller. I started doing wash and it was smelling like dirty socks when it was done. I own the machine for two months. I cleaned the machine with Afresh thinking the smell on my clean clothes was from being a new machine. Imagine that I have to use extra fabric softener, vinegar. I dont know what to do. This machine stinks. I am going to try to return it. Wish me luck. I dont think it washes right.

I have a small condo and this dryer fit into the appliance closet with a few inches around it. Every home needs a laundry system. I bought the washer and dryer in this model. Whirlpool is great!

We purchased the washing machine on February 2, 2013 and initially noticed that some of the clothes were still dry when the complete load was over. Meaning that I am not saving water cost because I then have to rewash the clothes and pre-scrub the clothes. Then a little over a year later, the machine is making this extremely loud piercing noise when spinning. The cost to replace the part is $250.00+ the repairmans fee. Whirlpool says there is nothing they will do. From reading the other reviews, this is really sad because of the numerous people having the same issueS with a capital S. I definitely would support a class action suit.

I bought washing machine Whirlpool Cabrio Model WTW7300XWO two years ago. It only lasted 2 years and the tub seal and tub bearing went bad. I called Whirlpool and they wouldnt replace defective part on their dime. I talked to supervisor and they still refused to admit they needed to fix this broken product on their dime and make it last longer than 2 years. They claimed only a 1-year warranty. This is totally unacceptable to have a supposedly good washer that you pay $700 for (manufacturer price $899) last only 2 years! Very, very disappointed! I wouldnt buy from this company again!

Purchased a new Whirlpool built in microwave oven model WMH 310 17 AB-1 in July 1, 2013. As of February 2014, the glossy black finish on this microwave is dull where the finger push controls are and scratched up along the top of control panel and top front of door. We only use a wet cloth and towel or microfiber cloth to clean this microwave; nothing that would be abrasive so very disappointed in this product. It looks quite ugly for a new appliance. I did not anticipate how delicate the outside surface would be - never in over 30 years have I had this problem with another appliance, even stainless steel does not scratch like this.

The dishwasher is noisy and the latch which holds the soap, at times sticks. When we think it is done and ready to unload we need to run it again because the latch that holds the soap DID NOT open. Not good.

I was not impressed with the new HE washers but could not find any traditional ones anymore. I bought a Amana and am disgusted that it is only 3 years old and needs to be replaced because of a transmission problem with it not agitating. It costs more to repair than it is worth. As a consumer, I should be given a choice whether I want to upscale or be satisfied with older model features. I will never buy or recommend a Amana HE washer to anyone. My mother also has one, has had it for a year and it is already giving her problems. Shame on you Whirlpool.

We bought the Whirlpool Duet set for $1,000 18 months ago. About four months ago, it started shredding our clothes. I would get them out with holes in them, but there was nothing sharp in the washer. Then the grey outside seal started deteriorating and getting tiny balls of rubber all over my clothes, ruining several white shirts. It always smells like mold. I just went to get my clothes out of it to find out it leaked water all over with that disintegrated rubber from the seal. The seal had completely ripped from the top to the bottom drain for no apparent reason. Now we are replacing the below. We JUST paid it off this month. It is crazy, it is already breaking!

I have always liked Whirlpool products but it seems lately they are lagging in this department. My washer/dryer combo each separate I dont feel are doing the job they should be. Washer is the bigger problem. Softner dispenser not distributing the softner correctly and now I have to clean out after each use. These are about 10 years old now. Is not spinning all the water out and not at all sure if clothes are getting clean. Most of their products usually lasted much longer back a few years.

Works fast and quietly. Easy to set up. Get the geek squad coverage and clean the filter at least monthly.

Bought this side by side, Whirlpool with ice maker and water dispenser in April 2013 at Home Depot. From the beginning, we have NEVER been able to get any chilled water out of the refrigerator. Sometimes the water is even warmer than the water out of the tap. Repeated attempts to fix and now Whirlpool tech Tom, told repairman, sorry this is normal, no refrigerator can guarantee temp of water.” Ive NEVER had a refrigerator with a water dispenser not chill the water much less, come out WARMER! HORRIBLE DESIGN & BAD COMPANY POLICY! Will NEVER buy another Whirlpool product!!! Now its dripping water inside fridge! Model #: WSF26C2EXW01 Ser#: HR30821156

When my dryer died my wife and I decided to get both a new washer & dryer. I kick myself for two reasons. My 15-year-old washer which worked fine I replaced, and I didnt check reviews before buying. What a mistake. The eco-friendly Whirlpool washer designed to save energy doesnt clean close, my towels are the worse. Coming out of a shower and using a freshly washed towel to dry off and it smelling like it had never been washed tears it for me. Im hoping like many others they will rebate or even better recall and pay back the money I spent on a worthless washing machine! So, if Whirlpool wont do the right thing, I will do my best to warn others to not buy this top loading piece of **.

3 months after I got the fridge, the ice maker went out. 3 months later it started to work again. Replace the water filters 2 times per yr. It is noisy when it makes ice.

Purchased this washer in 2009 from Lowes, believing the hype that it was efficient. Since we only needed a Washer at the time, we overpaid (it is more cost effective when you buy both washer and dryer). So we paid $1000.00 for this machine (we purchased the stand as well). After the 1st year, there seemed to be a significant decrease in how fast the washer spun, as the clothes were coming out wetter. I didnt pay much attention, but 2 years later, the machine has a weird problem where it couldnt complete the cycle, and by this time, every time it Spun, the noise was louder and louder.I contact Whirlpool, placed a service call and the Technician came out. $225.00 later, there was a hose that was pinched that was sending a wrong signal to the washer. He fixed that and told me I should get a contract on the machine through Whirlpool since I seemed to be having problems. I purchased the contract, for $300.00, and 2 1/2 weeks later placed another service call, as the noise from the machine was happening every time I did laundry. The service guy came out, indicated that it seemed to be the Agitator, and that he would need to order parts, and that they had a SPECIALIST who only does this type of repair, since they have many! He also indicated that the hose may have crimped due to the movement of the entire agitator!Well, after not hearing from ANYONE for 2 weeks, I called the repair company who told me WHIRLPOOL was supposed to call and let me know that they would NOT fix the machine, as the parts cost more than the Washer, which is now valued at $500.00! No one from WHIRLPOOL EVER CALLED, and I cant understand how a $1000.00 Washing machine touted to be so efficient and environmentally friendly has been THROWN OUT after 3 years!!! And now I am out the $225.00 repair, have no washing machine, $1000.00 down the drain (and I forgot to mention a year later we bought the matching WHIRLPOOL DRYER and OVERPAID) and now have to purchase another machine, which I assure you WONT BE WHIRLPOOL! As most of us have experienced, WASHING MACHINES last for many years! The washer I had before this was over 20 years!!!! So much for efficient and environmentally friendly... The only thing GREEN about this machine is how much of my $$$ has gone to Whirlpool!

I purchased my new Whirlpool Cabrio Top Load washer to replace a Maytag that had finally given out in the summer of 2012. I wish I did more due diligence, but with a toddler and a newborn, I needed a washer asap. I severely regret my $800 purchase from Sears. It is now February 2013 and the machine basically only runs on two cycles - Casual and Normal. All the others stop in mid-cycle. Sometimes, the items are still dry or partially wet so I need to switch to another cycle to complete the wash. This is not good for Delicates or when I wash Whites, Heavy Duty or Bulky items which is one of the reasons I purchased the model. The cycle stops when the items are soaked with massive amounts of water. So I then have to turn it to the Drain cycle and start over. After a day of washing one load, I couldve done it the old-fashioned way in my utility basin sink and hung it out to dry ... I dont have the time for this. I am going to make a formal complaint to Whirlpool and to Sears. I cannot keep spending nearly $1,000 for items that break within a year. These companies should be ashamed of their lack of quality. I shouldve gone with the Electrolux and just dealt with the price tag - I wouldve been much happier.

Purchased electric double oven range WGE555SOBS02, from Lowes end of 2014. Couple months it came on by itself, middle of night, 879°. Repaired panel 3x, then Lowes replaced stove, middle 2015. 6/26/2017 error message F2E1, control panel... stuck / shorted key. Out of warranty. Lowes and Whirlpool both claim no previous complaints. They will send repairman to assess problem, $150.

Purchased a gas hot water heater from Lowes in October 2015. Installed the hot water tank and two months later started smelling a faint gas smell coming from around the Honeywell box. Called Whirlpool and they thought it was the gas valve and replaced part, but had to pay $30 for overnight shipping. Had plumber install new part and did not fix the issue. Called plumber back out and he found a small pin hole size leak behind pilot light. Patched the leak and still had a gas smell coming from around the Honeywell box. Called Whirlpool back and after some back and forth was able to get hot water tank replaced, since it was only two months old and should not need any maintenance that soon. Replaced water heater with new tank and this tank has a gas smell coming from around the Honeywell box as well. We replaced all our lines and even had the fire department check out our gas lines. Could not find anything. I am still baffled as to why this tank has a gas smell coming from the Honeywell box. I cant seem to find anyone else having this issue. Whirlpool or Lowes has not been any help. Ready to unhook it and buy another brand. Anyone have this issue?

Purchased a Whirlpool French door in April 2020 during the pandemic for 2K. The first week of owning it my fresh vegetables froze. I lowered the factory set temperature by one degree. The next week the ice maker stopped making ice. 3 days later it started up again. The 3rd week my freezer food defrosted and the ice maker stopped making ice. Called Whirlpool And requested a refund. They said, No we will send a tech. The tech determined the control board was defective. I had to empty the entire fridge and turn it off, defrost it for 24 hours. The headache to find someone to take your food! The part took 2 weeks to get replaced.The tech said, If this doesn’t work we will have to come back and take the back off to see what the issue is. Told to defrost again for 24 hrs. The ice was so thick we did it for 48 Hrs. 1 week later ice started to form in the freezer and the ice stopped working again. Called whirlpool demanded a refund and they said no. A tech will come again. I’ve relocated my food 3x already. How many more times can I do that! Whirlpool is not concerned about their reputation at all, as I read through other reviews of situations similar to mine. Do not buy whirlpool!

I purchased a Whirlpool Duet HE front end loading washing machine. Less than two years after purchase, the machines tub and bearings failed amounting to a repair bill of $1035.00. Fortunately for me, or so I thought, I purchased an extended warranty for the machine. However, even though the complaint department was aware of the failure, the amount of the repair and the fact that I declined repair and was opting for the $500 reimbursement option, I was told that the claim, as it was called, would take 2-3 business days to process and if I was awarded (his words) the reimbursement, I could only use this money on a new machine at a Sears store and not on any new, but previous year model, or at a Sears outlet. None of these things were related to me when they took my $214.00 for the warranty. In all, my original washing machine of 22 months will have cost me $1414.00. My new washing machine, if awarded one, will cost approximately $400. The total cost to wash clothes for 10 months will exceed $1,800.00. Do not purchase Whirlpool front end loaders because the drum bearings will break (that is why they exclude them from extended warranties) and do not buy extended warranties as Sears makes out in the end.

They are good washers but they are overpriced. They have way too many functions for doing laundry. I know everyone wants their washer to do it all but the machines just can’t. There is no washing machine in the world that can sense a stain and pinpoint it and remove it.

I purchased the Whirlpool Cabrio with the touch panel and top loader. The absolute worst. The machine leaves white marks all over dark clothes even when the extra rinse feature is used. Ive tried multiple detergents, skipping fabric softener completely, using very little detergent, and even tried different water temperatures. Nothing works. And should one have to go through such extremes to not have white streaks left on dark clothes? Absolutely not especially for the money spent.The machine wrinkles clothes like I have never see before. The dryer usually gets them out but not always. They are mangled after washing. Using the first or second spin speed helps reduce some but they are wetter going into the dryer that way. If I wash bed clothes, the tight fitting sheet that fits snugly around the mattress must be washed alone. If not, all the other items end up encased in it as if youve intentionally packed it that way to carry everything around. This leaves everything absolutely soaked. I have also had shirts come out with dry spots on them. How does a piece of clothing come out of a washer with more than one dry spot on it? And no I did not over pack the machine.I have had no problems with the dryer. It does its job so no complaints on that. I would not recommend the Whirlpool Cabrio to my worst enemy. Complete waste of time, money, and water!!! Very disappointed and will never buy from this company again and will prevent anyone else from doing so the rest of my life. Did the company do zero testing on this machine before selling it? Because I see a lot of repetitive reviews. Or the company was well aware and did not care and just wanted to make money? Either way is unacceptable. Garbage!!!

Purchased the Sears Oasis (made by Whirlpool) washer and dryer almost 4 years ago and I have worked on these machines more than the Maytag machine and dryer I used for over 22 years. Electronic and mechanical problems. One recurring problem is loose change working its way into the drain pump on the washer and it knocks a hole in the side of the housing. You later discover it when you go down to the basement and find about 50 gallons on water on the floor. Very poor design! Never happened the first time with the Maytag.

I purchased a new Whirlpool 3.6-cu ft Top-Load Washer (White-On-White) Model #: WTW4800BQ from Lowes on 11/1/14, which was only 3 ½ years ago. The washer began making noise during the spin cycle so we called for service. The technician claimed that the bearing pack needed to be replaced and the repair would cost $400. This amount is $20 higher than the amount I paid to purchase the washer. Because the warranty is only one year, I contacted Whirlpool today and spoke with a representative. The representative said they could repair it under the warranty. When I asked how to proceed, she then asked me if I had an extended warranty. When I replied that if I had an extended warranty, I would be using it. She declined any assistance. I now have to purchase a new washer after only 3 and ½ years. I own 10 rentals. I promise that none of them will ever include a Whirpool product again.

I bought this dishwasher in Nov. 2018 to replace one that was barely working. I have enjoyed using it much more than my old one. Its very quiet and does a great job of cleaning dishes, pans and silverware. The only problem we had was installing it. The leveling screws do not hold their height adjustment when the dishwasher is pushed across the floor during installation because the leveling screw pad was changed from steel to plastic and the tapped hole for the leveling screw is too loose. The effect of this - whereas the steel pad would slide the plastic pad will grab, turn and move the leveling screw out of adjustment. Especially if its tapped hole is too loose. So we went to Home Depot and bought 4 5/16 nuts and used them as lock nuts on the 4 leveling screws. This cost 50 cents. Once we installed it everything worked perfectly. It does take longer to complete a cycle than my old one - 3 hours vs. 2 but it uses less water and does a great job of cleaning. You must use a drying agent with your dish soap or it wont get dry enough. Also, if you use the short 1 hour wash it wont have as much time to dry and some dishes wont be completely dry. I usually wait to do a full wash with the normal cycle - 3 hour.

I purchased a top load Whirlpool Washer and Dryer in April 2021. When it was installed I commented about how noisy it was. I was told it was because it was empty, but it will be much quieter once you put in a load of laundry. That did not make any difference. I called Whirlpool customer service and explained I had just purchased it less than a week ago and it appeared to be very noisy. I was told they could send someone out, but if they determined there was not a problem I would be charged a service call. I said the machine is not even a week old why would I be charged a service call shouldnt this be a warranty issue. Again I was told there would be a service call charge.I am completely baffled at the customer service response. This is the first and only time I called. I contacted the store where I purchased both the washer and dryer and was told it should not be that loud, this is the first time anyone has complained about the noise level and there should not be charge. Whirlpool has terrible customer service and I will NEVER purchase another Whirlpool product again because of the customer service. I have purchased numerous appliances in my lifetime and have never been treated so poorly. If I could return both the washer and dryer I would not hesitate. I would not recommend Whirlpool to anyone.

I cant even tell you how disappointed I am. This washer has destroyed my clothes and towels. Ive tried to reach out to company but they want me to call for service. What would I call for? Washer works, it just makes holes in clothes, in towels. There are so many complaints about this. If anyone know how to begin a process like this, please let me know. Trust me, when I write a review about something, its got to be either really good or really bad. I dont have time to write things like this.

My landlord purchased a new Amana washer (NTW4605EW0) Labor Day weekend 2015. It started having issues in the spring, so we went through the process of utilizing the manufacturers warranty. Apparently, Amana, part of Whirlpool, requires 5 attempts at repairing the machines before replacing. Okay, so starting in June 2016, we arranged service appointments 5 times and replaced 1 part, then another, 4 times. Clearly, that part is defunct. Right? Fast forward to September and then into October. Get a new washer, and not the one I preferred. We got the Whirlpool WTW4816FW1. Before the installers leave, we are having the SAME issue. Stops midcycle, doesnt finish cycle, sometimes stops while filling, or while full, or kid wash, or mid drain... But now with the new washer, the drain and spin cycle thinks it should FILL instead of drain... and Whirlpool said they would get someone out the next day, a promise they cannot keep because they dont supply the repair guy, they source with local companies. So, the company ordered 3 parts... That could be the problem. And 4 days later, 2 parts are on freaking BACK ORDER. Parts arrive. All new parts replaced. Machine still doesnt work. Outlet tested by us and them and it is fine. The techs think there is some kind of RF interference. Turn off sensor light, which is on the same wall, unplug power to wifi router (which outdates the washer). Still, doesnt work.I have spent half my week, every week, since June, restarting my washer, unplugging the damn thing, waiting, and waiting, trying again and again and again to wash 2 loads of laundry a week... Literally takes a week until the damn thing does its job. Whirlpool is sent us a replacement washer. Can you guess what happened the first time we started it? SAME ISSUE. Cycle will not complete. Sometimes it dies before it even fills. Sometimes it dies while filling. Sometimes, it will fill and fill and drain and fill and fill and drain and... never stop filling. Or, the fun one, the drain and spin cycle thinks it is suppose to fill. Continuously. And then, suddenly, after unplugging it for 1 hr, or 24, or 72 hrs, it will work fine for 1-7 cycles. Nothing is consistent except that it doesnt work consistently. HAS ANYONE HAD THIS MUCH TROUBLE???

I purchased a Whirlpool Cabrio in 2009. It worked so-so over the years but recently stopped completing cycles, citing false load balance errors and leaving towels and sheets sopping wet at the end of a cycle. Three repair appointments later, and still no success. I am thoroughly disgusted that such an expensive machine only lasts four years. Based on the service techs attitude toward the machine and other consumer comments, Im guessing I will have to replace it. You can guess it will not be with a Whirlpool machine!

I have had my Whirlpool refrigerator 14 years and have had service on it only 1 time, for the ice maker. I have had a fridge where the compressor went out twice. Dont remember the brand but do remember the experience.

Everything comes out clean and it doesn’t cause items to be tangled around each other. It has a setting for every possible type of load. I especially like the option of having “deep water”. Not having a “glass” lid is a plus.