Do not under any circumstance end up with the Whirlpool fabric washer and or dryer in your dwelling to wash and dry your clothes. The washer, model # WTW7000DW0 and dryer, model # WED7000DW0. I am so upset with these units and the company I bought a 5 year extended warranty thru. I cannot put down in words what I think, because this review would not be published. Do not even accept these units, even if they are free. Even the repairmen who have been here said they would not buy these Whirlpool junk washer and or dryer series. They acknowledged the problem and said nothing could be done even though there is a legitimate problem. Not only is there a problem with the washer, the dryer as well has serious issues. All washes have to be put on the deep water cycle and some loads have totally dry spots on clothes where the clothes did not even get wet after the washer went thru the complete cycle. Also, get this, this washing machine even has to be cleaned itself with a cleaning tablet run thru a cleaning cycle. What happens are the clothes get a nasty, slimy, white muck on them. Even, immediately after the washer gets cleaned, sometimes the clothes 32nd up with this muck on them again. If you do not see this muck on your clothes before putting in the junk dryer, then the clothes have to be washed and dried again. This washer is supposed to be efficient, not a chance. It gets costly having to purchase the cleaning tablets and the washer(28th only two people in the household) has to be cleaned a lot more than what the manufacturer says and I called and asked. Pure junk, do yourself and even your enemies a favor, stay away at any cost, and like I said, even if they are free.

I purchased this washers predecessor, the WTW6200 in May of 09, along with the matching dryer. The bearings gave out after 36 months of use, and our household comprises two adults in their mid-fifties. Estimated cost of the repair? $650! Why am I posting this here? Because two weeks ago, my daughter-in-law called to say that shed so liked my machine when she visited in 09 - Id had the thing for two weeks at that time - that shed bought the WTW8500B and... the bearings were already giving out. I suggested she get the thing repaired, sell it immediately and replace it with an LG product, which is what Ive done.She has been put on a three-month waiting list for the repair, confirming my feeling that Whirlpool, as a whole, has gone down the tubes. Their service record is dreadful, with an excess of 20K complaints existing at various consumer agencies regarding ALL the Cabrio line, and their warranty, Ive learned, is considered the worst in the industry. All in all, the single worst purchase of my fifty-odd years.

Do not buy a Whirlpool refrigerator. This is the 3rd time I have to call in repair for the ice maker in 4 years. Water poured out on my floor for the 3rd time ruining my floors. Called Whirlpool and said there is nothing they can do to help me. They don’t care about their Customers! I could have bought a new one by now based on repair costs. They don’t back their products. I’m really annoyed now!

I had a perfectly good Kenmore range, but I didnt like the color. I purchased a Whirlpool 30-inch gas range at Lowes. I had problems immediately! The repairmen were at my house 6 times within the first year. My warranty expired and they wanted me to pay for an extended warranty. I refused to pay any more for this piece of junk! I fought with Whirlpool and demanded they either replace the range or reimburse me the full cost. They finally agreed, after many heated conversations, to replace or reimburse me as long as I promised not to purchase a Whirlpool product again. What kind of company would say that? A company that knows their product is defective and has poor customer service. I opted to take the new range that they promised wouldnt have the same problems. It is having the same issues as the original one. It shuts off in the middle of cooking and it is infuriating to say the least. I can promise Whirlpool I will never purchase a product from them ever again!

We purchased our Whirlpool dishwasher/Model no. WDT780SAEM in July 2016 and it was installed on August 3, 2016. Right away we noticed 2 problems. The top tray squeaks very loudly when being pulled out for loading and unloading. The usual temporary fix for this would be using a product like WD-40. Of course as soon as you run the dishwasher all of the product is washed away. This was our first complaint about this dishwasher. The more important problem was the white cloudy residue being left on all of our clear plastic cups and glasses. Weve always had hard water but our previous dishwashers were able to remove the residue if we used the high-temperature wash. After looking at all of the manuals and user guides that are included with the purchase we read that we should be using a rinse agent and a product such as Lemi Shine to deal with hard water deposits. We tried these items and nothing worked.Using the All Fresh tabs didnt help and our filter was clear and clean. So we made an appointment to have the Whirlpool factory serviceman come out to look into our problems. First of all the customer service representative I spoke with was rude and impatient. She kept cutting me off and asking me about hard water and suggesting that I use all of the products mentioned above before finding out that I already had used them to no avail. Because we had the dishwasher for just over 30 days I asked her about the Clean and Quiet Guarantee that I found out about by going to Whirlpools site. Her exact words were The clean and quiet what?? So I didnt have much hope for our service appointment. Our serviceman was asking all of the same questions about hard water and if we had tried all of the products I mentioned above.After his visit we found out and now (too late) know that because our new dishwasher does not have a heat booster or the ability to get the water temperature high enough to remove the hard water residue theres nothing Whirlpool will do for us. This is the case with all newer technology dishwashers UNLESS you purchase one with a heat booster. I sure wish this wouldve been made clear to us, the consumer before making our purchase. If we had known beforehand that new dishwashers no longer get the water up to 140 degrees which is what would be needed to remove the residue, we wouldve made sure our model included a heat booster. Now were stuck handwashing our plastic items if we want clear dishes. Its not the end of the world but its not good customer service or honest to the consumer in any way, shape or form.

I bought a Whirlpool High Efficiency top load washer. It does not get the clothes clean. Dark clothes come out with spots all over them. There is not enough water to rinse out the dirt. It is left on the clothes in spots. I have to take my clothes to the laundry mat to wash them to get them clean. I am 74 years old and have used Whirlpool appliances all my life. I have dt3 rental houses I keep Whirlpool appliances in. But I wont be buying any more. I had to call the repair man one month after I bought it. He had to recalibrate the machine. If all you want to wash or maybe rinse out is a pair of slacks or a shirt, it might be o.k. but not a load of dirty clothes. It is just a JOKE.

We purchased a Whirlpool gas range for $600 in Aug 2015.. On May 2015 the range had an internal board failure (F2E0) and the panel does not control the oven or other features. We found out the part ranged from $350-$400!! Plus service installation! The one year warranty of course ran out but I think this is an outrage to sell an appliance that has such a poor electronic part. I have read a few similar complaints as this is also a Frigidaire model as well.

We got a deal on our stove/dishwasher combination, establishing a payment plan upon purchase. And as a bonus, when you have a brand name appliance like Whirlpool, that made us more secure with the purchase.

Purchased a new Whirlpool Energy Smart 50 gallon water heater from Lowes to replace our existing old one that had gone bad. Never again!! Had it professionally installed by one of Lowes installers. I have no problem with the installer.... the water heater was a piece of junk. From the first day we had sporadic hot water and to get that you had to have a hot water tap turned on full force. If you turned the tap to a lesser flow you got cold water. Couldnt get a hot shower at all. Contacted Whirlpool customer service 4 times by phone and 3 times by email. Horrible !!!! If I had read all the reviews ahead of time I would never have purchased a Whirlpool water heater. Each time contacting their customer service I was informed I had a plumbing problem... probably a cold water line was feeding into my hot water line??? Really??? After living in this house for 20 years all of a sudden I have a cold water line magically connect itself into my main hot water feed? I even set the temperature up as much as it would go. Could easily hold my hand under the hot water without getting burned. Most of their phone reps sounded like they were reading from a check list sheet and no desire to actually listen to what I was telling them. One even sent me a PDF file via email that had nothing to do with the problem I was describing to them. I finally told them after two weeks of this that I couldnt live with this situation and they said Well our technicians are 38 miles from you and we wont send one that far to check it. Asking what I could do they said Id have to hire someone (they werent able to tell me if I should hire a plumber or electrician) and Id have to pay for it and they would reimburse me. Sensing that this might be a fruitless task I resorted to calling the Lowes store where I purchased it and asked their advice. They offered to send out the original installer to check it out and work with Whirlpool over the phone. Like I said, I have no complaints with the installer, he was fast and professional. I stood there while their technician/customer service had him go through a few tests on the unit. All of that proved nothing except in their minds that nothing was wrong with their unit. He got off the phone and told me They refuse to accept any responsibility for the product being bad. I asked him what was I supposed to do. He got on the phone with the manager of the Lowes store and they agreed to swap it out at no charge to me. I of course was very happy but told them after all of this I didnt want another Energy Smart type water heater and that I didnt trust the electronics at all. He agreed to swap it out for a regular type and give me a credit for any difference in cost. Had this all done in one day and am very pleased with Lowes commitment to customer service. The new heater (still a Whirlpool sad to say) appears to be working fine just like my old one did. So much for it being a problem with my plumbing. After reading all the complaints about Whirlpool water heaters, I guess Im not looking forward to much of a life expectancy with this one and Im certainly not even going to attempt to call Whirlpool customer service if I do. This whole thing cost me $700 and as far as Im concerned Ill flush $700 down the toilet before buying another Whirlpool product. I still would love to know how any person with half a brain could tell me I had a plumbing problem when all that was done was removal of an old water heater and replaced with a new one. Thats two pipes people...cold water in, hot water out. I see that there was some type of class action lawsuit filed against Whirlpool. Maybe they need another one filed or forbidden to sell water heaters ever again.

I have fought with this issue hundreds of times over the last 3 years. My old water heater work fine until it started leaking, I bought a Whirlpool 40 gal gas hot water heater from Lowes. Worked fine for the first month, then this pilot light issue started popping up intermittently. Now the damn thing doesnt want to light at all. I WOULD NEVER BUY ANOTHER WHIRLPOOL PRODUCT THE REST OF MY LIFE, and I will tell everyone I know that WHIRLPOOL Products are not quality products. DO NOT BUY. There have been so many class action lawsuits about this product and Whirlpool keeps on selling this junk. Im so frustrated with WHIRLPOOL customer support I cant think straight. To reduce your headaches in life, do not buy Whirlpool products as they are junk and their customer support is terrible also.

I bought a Whirlpool French door, freezer drawer on bottom at Lowes 2 years ago for $2,600. The refrigerator needed a new motherboard within the first year and now that it is in the 2nd year, service is required again. The repairman ordered the part and came the 2nd time to replace the part upon receipt. Now it needs the 3rd part since it is still not working. I have a herniated disc in my neck and had to remove everything from the refrigerator and freezer to take downstairs to salvage our food. Now I have to go through the same thing again for the 3rd time after the additional part comes. This refrigerator is junk. I asked Lowes for a new replacement but of course was denied. Does anyone know a good lawyer for this type of situation? I never had a problem with an appliance like this.

I purchased a Cabrio high efficiency washer in 2011 and have had the glass top lid crack twice. The hinge is rusted, shedding rust all over the corner of the washer. It is a design flaw, for I see others have had the same problem with this particular year. I have also looked at the newer versions of the Cabrio and the lids have been redesigned. This lid should be recalled and replaced with a newer version, because this lid will always rust and crack with use.

Purchased Model # wtw5000DW0 Jan 3, 2015. Aug 15, 2015 started leaking water. Certified technician came to repair. Aug 17 - new transmission. Sept 3 replaced new transmission with another new transmission. Sept 8 called master technician at Whirlpool, needs new clutch assembly. Both technicians stated they dont know what is wrong with the machine. Sept 10 new clutch assembly and agitator replaced. The machine still makes a horrible grinding noise and is unusable. The technician has replaced everything but Whirlpool says it is still fixable. The Master technician has no idea what is wrong with my machine yet he refuses to call it broken. I have been without a washing machine for 3 1/2 weeks. They refuse to offer a return authorization number. I have spoken to a Supervisor on the phone. She states the warranty is for repair. They wont admit their product is a piece of garbage. They have lost a customer. She stated she will put my complaint in a file.

We have been married 36 years. Since year one, me and my wife have owned nothing but Whirlpool appliances. They lasted forever. Approximately 4 years ago, we redid our home, and bought all new appliances, stove, refrigerator, dishwasher, microwave, front loader, washer, and dryer, Since then, 4 years ago, our refrigerator ice maker stopped working. 2 years ago, our dishwasher wont heat up, so it is useless to us, and the bearings in the washer are shot. I must say we are so disappointed in Whirlpool. We are barely living on my husbands income as I had to stop working 3 years ago, as I became disabled, but did not make enough money to be able to collect disability. We cannot afford new appliances, nor to fix them. I am sending you the model numbers of each appliance, hoping you will do something to help. This is just ridiculous. It is just my husband and me in the house (washer: WFW9200SQ02; refrigerator: GD5NVAXSA01; dishwasher: no model number, but it is Energy Star II 8575637). Please help. We cannot afford to replace this, nor repair. It is hard for me to go to the laundromat, then come home to dry. Standing long periods to to dishes, takes a toll on me. Please help.

We have had this Refrigerator for 3 years in December of 2016. To date, we have had to call a repairman (in February 2016) to replace a circuit board on the back of the refrigerator. That took 4 days, as the company sent the repairman the wrong parts. After that $300 repair, which we got at a discount because, the repairman felt bad that the company actually sent the wrong part. Since then we have taken it apart ourselves for several reasons: The freezer compartment filled up with a layer of ice and started to melt all over the floor, shutting the refrigerator off, (which then forced us to borrow coolers to store the food) until it could be repaired. The drain tube was completely blocked and in order to fix this problem, the tube had to be taken out and modified, according to the Internet videos we then watched. In order to make all of these repairs, the door, the shelves and baskets have to be removed, which is definitely not an easy thing to do at all.There are so many hidden screws and tabs that must be manipulated with tools and by hand to remove the doors, shelves and trays just to get where you need to be in order to make these repairs. With each repair, the ice maker and water dispenser started having problems, because, each time the refrigerator has to be shut down, it takes hours for it to re-set itself. Luckily my husband had the tools necessary, with videos on the Internet to assist us. However, once the first problem started, it was a snowball effect, literally. ALL of these problems have been identified by the manufacturer, however, nothing has been done. VERY POOR DESIGN!

We purchased Whirlpool Cabrio 8.8 cubic ft Electric Dryer with Steam Cycles (Chrome Shadow) Energy Star Model WED8500DC and Whirlpool Cabrio 5.3 cubic ft High-Efficiency Top-Load Washer with Steam Cycle Model WTW8500DC and have had no issues at all, only personal issues, such as me being 54 tall and cant reach the bottom of the washer tub to take out all my clothes, so my husband helps, he is 5 9 tall and can reach in it fine, so we do laundry together now! We have washed very small loads to large loads such as, bedding sets without any issues at all. We love the gorgeous look as well. We have only owned these since November 2015... so about 4 months now, but we are completely satisfied! We have always owned Whirlpool, our old set we bought in 1998 and they finally gave out in 2015! Whirlpool for life for us!

Had washers model # WTW8500DCO repaired after being install for 14 days. Have had washers repaired every 90 plus days because of constant electrical and mechanical failures. Would not ever buying another whirlpool appliance to my worst enemy. Customer service is a total failure. If you ask a question after talking with you for 5-8 minutes and they dont have an answer they start saying HELLO, HELLO? I have to hang up. I cant hear you. Just a really sad business. Stay away!

Updated on 03/15/2020: We bought this eight years ago to replace a 20-year-old Maytag that had finally developed a rust-related leak after serving us faithfully and needing only one almost trivial repair ($10 DIY lid switch replacement) over that period. I have replaced the water pump, the gear case, rotating seal (3 times), the lid switch striker (3 times), and the replacement gear case is making noises indicating incipient bearing failure. In its finite wisdom, Whirlpool decided to make the failure-prone main bearing irreplaceable, which means you have to replace the entire gear case, at a best-case cost of $120 and a worst-case cost of $300, plus labor, unless you do the work yourself, as I do. The secondary issue is mold and a musty odor. The most effective way to eliminate this is to pull the drum (non-trivial, requires a car jack, a 2x4, and a special spanner/wrench) and swab down the inside of the tub with disinfectant. (Been there ... done that three times over 8 years.)Original Review: I am in the process of replacing the bottom seal on my 6-year-old Whirlpool Cabrio (WTW5500XW2) washer. This will be the fourth major repair I have done on it. Fortunately, I can do the work myself and know how to find the best price on parts, but it is still discouraging that a lightly-used washer would have so many problems in such as short time. (It replaced a 20-year-old Maytag that finally rusted out.) Repairs to date: 1) replaced drain pump motor; 2) replaced lid switch; 3) removed basket twice to clean outer tub, due to mold and odors; 4) replaced suspension rods due to excessive spin vibration; 5) out of commission awaiting a new bottom seal. Total cost of parts (labor was on me) is well over $100.

I purchased a new home in 2005 and equipped the kitchen with Whirlpool appliances. Every single appliance has broken at least once. The refrigerator ice-maker has been repaired once and replaced twice. Some of the control panel buttons on the dishwasher work some of the time. Other times we have to strike the panel to make them work. Weve had to replace the handle on the microwave door twice at nearly $50 a pop. And the motherboard on the dual-oven has been replaced once. I will NEVER purchase another Whirlpool appliance for as long as I live.

I purchased a Cabrio Top Load Washer and Front Load Dryer four and a 1/2 years ago and have had nothing but trouble with them! The dryer needs to be run 2 cycles to get the clothes dry. In that time I have had a repairman come to the house 3 different times to look at the dryer, which cost me over $200. They have had to replace the belt and inner pulley and then the sensor harness. Recently when they came they tried replacing the coils. It continues to give me trouble drying the clothes and I am very dissatisfied with it. A few weeks ago the washer broke. I have had repairmen come to the house 4 different times. Multiple times there has been a problem with the spin and drain cycle. All of the water would not empty out. I would have to run the cycle again. They eventually replaced the actuator. I continued to have difficulties with the washer.Then the machine got very loud when it would spin out sounding like a rocket was going to take off! The repairman came once again said it was the motor. When they returned with the parts and took the machine apart, the parts inside the machine had all corroded! The water had been leaking inside the machine, destroying it, and a black sticky buildup had formed! The machine was deemed unrepairable! I paid over $700 for each machine and am very upset about this. When I spoke to customer service they would not stand by their product because I didnt have the warranty anymore. After numerous phone calls I filed a complaint and gave a bad review of the support service and product that I received.Weeks later they called me and offered to have me purchase another machine at half price! I had already bought another brand washing machine and I asked them to apply the amount toward what I had spent on the new one. They would not and insisted the only thing they could do would be to have me buy their washer at half price. I told them I lost faith in their product and didnt want another one. So, I would not recommend the Whirlpool Cabrio washer and dryer, or Whirlpool products since they will not stand by them! I have pictures to prove what happened to the washer!

Worst service ever. This is my 4th refrigerator (I have 2 homes and moved a few times) and I have NEVER heard of a compressor going bad in 8 months. This was a new fridge, and all of my food went bad along with my infants milk. I cannot express how upset we were, and Whirlpool told us that they cant do anything for us, and it was just something that happens. Basically, they told me, Sorry for your loss... you should buy a longer warranty since this is not covered if it happens after a year. This is Whirlpools way of telling me, we dont care if you use our product. I am amazed that they wont give us even a credit for what happened. NEVER BUY WHIRLPOOL.

If I could give them zero stars I would. NEVER BUY A WHIRLPOOL GAS WATER HEATER! Our Whirlpool water heater Is 4 years old. Pilot light wont stay lit. A reputable plumber came out and said that the control knob is bad and to call Whirlpool to get part because its still under warranty. So I call and get nothing but a hassle. They tried to tell me that it was installed in a room that the installation manual says it not to be in. (Background here. The house was built in 1960. It is on a cement slab and its a prefab house.) The manual says Do not install in bathrooms, bedrooms or any OCCUPIED room normally kept closed. Now let me tell you where it is at. It is in a 5 by 3 boxed area with cement floor and walls to the ceiling with access doors to it and to the furnace which is also in this area. The access door to water heater is on the back side of a bedroom closet, access door to furnace is in a hall. So Whirlpool tells me that they cant give me the part Even if I pay for it due to some national fuel and gas code. They wont even tell me where I could buy the part... They said the only way they can help me is if I relocate the water heater or put in a ventless water heater. Our water heater is vented thru the roof of house... It gets plenty of ventilation. They wouldnt let me talk to a supervisor to complain... So this is why I am on here writing this review. I might add this is not our first issue with Whirlpool. Had a brand new KitchenAid refrigerator with ice maker. The ice maker didnt work from first day. After 3 techs and 3 visits it still doesnt work. Then also the compressor went out. If you want a better product and want good customer service then dont buy Whirlpool.Oh and one more thing. Our plumber also doesnt like Whirlpool. He said he had problems every time when he has to deal with them. He said its to the point when someone calls for services and tells him its a Whirlpool he just cringes. Now thats pretty bad. I just spent 4 almost 5 hours of my morning upset to the point of tears. With no results. Another note. I called my gas company. They said our water heater is in a safe place. If it wasnt they wouldnt be supplying gas to us. Live and learn. Done with Whirlpool.

If you are considering a Cabrio washing machine, save yourself the aggravation and buy something else. I purchased a Cabrio model WTW5640X from Lowes 2 years ago. It has been one disappointment after another. First, the clothes were coming out really wrinkled and not fully rinsed. I now routinely use the extra rinse cycle. I also started washing very small loads with hardly any soap (and yes, I use the HE detergent). That works for me, but its not practical for a household of more than 2.This machine is also not for anyone with kids or who expects to remove routine soils. It doesnt clean well. White socks start looking dingy after a few washes, and even the hot cycle with bleach doesnt get whites white. Now, the washer has started shutting off with the clothes still soaking wet. I can press the Drain & Spin cycle to get it finish the job, but that adds another 13 minutes to the 63 minutes it already takes for a regular cycle with the extra rinse. I so wish I had not replaced my 15 year old Kenmore.

Whirlpool Cabrio platinum washer (JUNK. DO NOT BUY). As mentioned in other complaints, the Cabrio top loading washer is garbage. Sound during the spin cycle is VERY LOUD because of a bearing noise. The clothes dont even get clean, lint all over dark clothes. I am the only person in the household so the machine did not get used as much as a family would use it. DO NOT BUY THE CABRIO WASHERS.

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

Very unhappy with my top load washing machine. I use more water. Can wash fewer clothes and clothes do not come as clean as with my older Whirlpool. This machine needs a SERIOUS AGITATOR. Will not buy another Whirlpool.

My best advice is save your money. Better off washing by hand. Bought a new RV that had Whirlpool washing machine. Used it twice and now it doesnt work. Whirlpool parts back-ordered till another month or more. I asked for replacement and they said sorry, our warranty only covers repair. We will not replace it. WOW What a CRAPPY Company. Dont even get me started on how many times you have to call their customer service to even speak to anyone. Im on my 28th call, their on hold keeps hanging up on you, or just says, Sorry we are busy, and then hangs up on you. No place for message or anything, just Bye! If anyone ever took my advice, Id hope this is it. DONT buy Whirlpool.

I purchased a front load washer and dryer brand new. The washer is under a 2-year warranty on all parts and labor. Since I have purchased them, the washer has had to be fixed on several occasions. I have had 10 parts replaced and had to be out a washer for a month at one given time. I have had the repair company email me all the parts and services that they have done. All I want is a new washer! I have argued with Georges Appliances on several occasions because I believe they sold me the obviously faulty washer and I dont believe that I should be responsible to have to figure it out for myself. They should be responsible to provide me a new one. They told me that I had to contact Whirlpool in order to receive a new washer. Please contact me asap.

When I grew up, my mom and dad had a Whirlpool dishwasher and it was the ONLY dishwasher we EVER had. The SAME one, for over 20 years! So, with confidence, I purchased a mid-range unit. (over $600 2015). By 2016, ONE year later, I was already buying replacement parts because the top rack was falling apart and the bottom spinner broke as well. The parts were extremely expensive and hard to find. Now, a mere 4 years later, you cannot find ANY parts for this machine and there are so many issues with the unit. It is no longer functioning. When it did work it ran for 4 HOURS!! Even then, the dishes are filthy. I am so upset by whirlpool. I want a full refund from the company for treating their loyal customer so badly.

The electric range was purchased June 2011. In June 2012, I purchased the extended warranty from Whirlpool (or their agent). The range is located in a summer cottage, so it has minimal use. I cleaned the self-clean oven last week after carefully reading the manual. Manual did not state to remove the chrome drip pans on the top, just “remove oven racks and storage drawer contents”. The oven cleaning caused the right rear burner pan to turn bronze/black. I called Whirlpool. I was referred to Warranty folks who told me they will not cover it because it is cosmetic and referred me back to Whirlpool (as it was WP instructions that were incorrect!) I called Whirlpool and they will not replace the chrome pan. I can purchase one. This is not my fault as aforementioned. I have been a Whirlpool customer for years. I will never buy another WP product. If they cannot write the instructions correctly, it makes we wonder about the product.

10 years, no problems with our 25 cubic foot french door Whirlpool refrigerator. Ice maker is a solid performer, with nary an issue. Temperature controls work flawlessly. The black frame looks great in our kitchen with espresso color cabinets.

I had a Whirlpool Natural Gas Water Heater professionally installed on 2-27-2107. This unit came with a Honeywell controller and thermopile assembly. Today is 05-18-2019 and the unit is not inoperative. The pilot is lit but the burner wont light. Here are the issues that I have come across so far: When I go to the Whirlpool site there is no direct link to Whirlpool water heaters, just kitchen appliances and washer/dryers. When I click on parts and accessories link it gives links to washers, dryers or pedestals. Again... No information about water heaters. I scroll down to the bottom of this page and I see a link to All Replacement Parts When I click that it takes me to another site managed by RepairClinic. When I enter the model number for the water heater it says Not Found. I entered the part number for the thermopile on the tag on the orange wire #321165-002 and 100078039 and again it returns as Part Not Found.Its obvious that Whirlpool is putting little effort into supporting their water heaters or their customers. I called their support line and they were able to order the thermopile assembly for $55 plus $27.95 in shipping to get it here by Tuesday. Today is Saturday. So that means almost 4 days without hot water. And since this water heater was a warranty replacement for a previous one that went bad they will not cover the cost of replacement parts for the thermopile. Lesson learned: No more Whirlpool purchases for any of their appliances.

This product deserves ZERO stars! I purchased a Cabrio washer - dryer in October, 2013. I have carefully followed the instructions for the washer. I am hugely distressed about the large amount of money I spent on a washer that is absolutely terrible, horrible, awful., no words can adequately express how bad this so-called washer is. The low-water washing has torn up all of my new towels in the matter of a couple of washes. It has completely ripped out the hems of the towels and pulled long ragged strings in the towel. And these were not cheap towels. I am mad at myself for not researching better before buying. I hope my complaint can save another consumer from the misery I am suffering because of this shameful product.

Bought this machine at Lowes as it was recommended by the salesperson. The machine broke down in 2 months due to a control module. Besides that, the clothes do not get clean! They come out with all the stains still on them. The water does not even get the clothes wet! And they smell. Called Whirlpool up and they sent out tech 2x and said there was nothing wrong. Went back to Lowes and they will not honor my claim to replace the unit. I now have to purchase a new machine since this one is useless. Never will I buy a Whirlpool again and dont you either!!!

I have never posted a negative product review but must do so now. The refrigerator is 1 1/2 years old at most and has been well taken care of. I noticed today that the finish at either side of the bottom of each refrigerator door handle has a problem. I couldnt tell if the finish was pitting or is just discolored. I called customer service and expected that they would help, especially since we have an extended warranty. Representative number one told me that the extended warranty only covers problems that affect the function of the product. I spoke to her supervisor and then her supervisor. I got plenty of apologies but no support. I offered to send pictures, but they were not even interested in checking out the problem.After speaking to them, I took the handle off and I see now that the handle cut into some sort of film that exists on the metal. (I am not talking about the protective plastic coating that is on the the refrigerator at delivery.) The film is lifting off the surface and creating discoloration. If Whirlpool was at all concerned, I think this issue could be fixed with some sort of gasket to keep the metal handle from cutting into the surface. Im hoping the problem is static, but hard to say what will happen. If they had been interested in trying to understand the cause of the problem, it would have been easier to accept the limitations of the warranty. It would have demonstrated an interest in avoiding this problem for other consumers in the future. My last Whirlpool product. Period. Good luck if you decide to do business with them.

I have made a conscious choice to remove baked food from my diet back in early 2013. That has not stopped my wife from pursuing her passion for baking from time to time. It goes without saying that baking requires a well functioning baking oven. The one that came with our home was a Whirlpool Wall Oven/Microwave combination. Sometime in early 2014 the Oven broke down. I had no choice but to replace the combination. After doing some online research and a couple of trips to stores like Sears, Home Depot and Lowes, we decided to drop $2700 of our hard earned dollars on a brand new Whirlpool WOC95EC0AS wall oven microwave combo to replace the old one. Lowes sent someone home to take measurement to make sure that we ordered the right size for the slot in our kitchen. 2 weeks after the purchase, around March 27th or 28th, we had the Microwave/oven combo installed in our kitchen by some Lowes provided installation contractor. After installing the appliance, the technician demoed both the microwave and the oven part of the combo. Everything looked good and we were happy to see the shiny new appliance adorning our kitchen. Little did we know then that this would start a seemingly unending horror story. For the first 3-4 weeks we used only the microwave and it worked as expected. Then one weekend, my wife decided to do some baking. The dough was prepared meticulously and then came the first surprise, the oven refused to turn on. Feature not available - the message scrolled across the LED display. And horror of horrors, the microwave started giving the same message immediately after. We looked online for solutions, and we found one that suggested that we try breaking the circuit for 1 minute and turn on again we tried it to no avail. And now we went from having a working microwave/broken oven to no microwave/no oven.We waited till the next day or so before placing a call to the customer service number provided in our warranty receipt. By now the 30 day return guarantee had expired and it was the end of April, 2014. Product was now under manufacturers warranty. Whirlpool/Lowes customer service scheduled a technician to come take a look at the oven.My wife took a day off from work and waited for the technician. The technician from J&H appliance repair of SJ came home, took a look and then tried breaking the circuit and turning it on again after a minute; of course, it did not work. After consulting with someone on the phone, he decided to order some parts the main circuit board. He promised to come back after the part arrived. We did receive a call from J&H to schedule an appointment to install the part and schedule a time we did. J&H decided to no-show us on the appointment and my wife wasted another day of her time-off from work.We called customer-service again and this time they decided to send in a technician from a Sears owned company called A&E Factory Service. A technician came home and he went through the same steps as the earlier technician from J&H. This time, it was my turn to stay home and welcome the visitor. Finally when there was no trick up his sleeves to left to try, he decided he is going to order the main board. A&E technician did something different, he ordered the part to my home. I called him as soon as it arrived. We scheduled a time and he arrived to install the part. I stayed home again. Well, result was no different and the appliance was in no mood to oblige to our coaxing and cajoling. Feature not available, it continued to bleep out. He ordered 2 more boards to my home. I stayed home again to welcome the technician and he arrived again to install the 2 new boards but the result was no different than the last time. Feature not available - the zombie appliance screamed. He told me that there is only one that remains to be done which is to replace the front panel circuitry so he ordered it. By now it was end of June. We hadnt used the oven for 3 full months and the microwave for 2 months.First week of July, a new technician from A&E showed up early in the morning to install the newly ordered front panel. Surprise, Surprise - Feature not available screamed the shiny lemon sitting in my kitchen wall. The technician asked me if I will be home the whole day and I said yes. Another technician, a supposedly senior expert came by that afternoon. He tinkered with it for a couple of hours and like all who came before him, he surrendered. He said there is nothing left to do with the oven and that he is going to recommend that the oven be replaced.He left me a voice mail next morning saying that I need to call Whirlpool myself and apprise them of my experience and ask for a replacement. So I called the customer service after a long 1 hour talk with customer service rep, followed by a conversation with his rude supervisor. I was told that Whirlpool no longer deals with A&E that they broke their relationship with them as of June 31st, 2014. I failed to understand why that was my fault. I was told they need to send technician from another company, can you guess the company whirlpool recommended? It would be funny, if it wasnt incredibly painful to deal with horrible customer support representatives yes, it was the the no-show company J&H. I told him Id have nothing to do with J&H. So they recommended their only other option, a company called AGO.AGO technicians started showing up at my house since early July and I waited with baited breath for them to suggest a way forward to a resolution. Well good thing that I didnt hold my breath for that to happen. AGO technicians have made 8-9 visits to my home during July and August with the last visit being on Aug 20th. They replaced all the boards that A&E guys had already replaced the previous month. On August 21st, I received a call from AGO rep saying that they have given up that the product is irreparable. They gave me a reference number and asked me to call Whirlpool for a final resolution.I called Whirlpool customer service on August 22, 2014 and Spoke to Jennifer and her supervisor for 32 minutes. They wanted to restart the whole process of sending technicians to my home. It would be funny if they hadnt stolen $2700 of my hard earned money + all the lost hours and productivity + vacation time lost + headache they caused + the pain of not having a working Oven/Microwave in our kitchen + dealing with rude customer service reps, I lost it. I threatened to put the whole recorded conversation on YouTube. The rude inconsiderate supervisor hung up on me.I called back after a few minutes and spoke with a tad bit more reasonable rep named Ashley. At least, she had the patience to hear me out without barking at me about what my rights are as a customer. Well she had no better solution than to suggest another technician appointment what was the excuse this time? That the last technician from AGO didnt call Whirlpools tech support line while he was at my house. As if that is my fault. I agreed and we setup an appointment for Wednesday, August 27, 2014 between 8AM and 12PM with the same old company J&H who no showed me once. Goes to show you who Whirlpools associates in business are. They had only two companies providing repair services in San Jose AGO and J&H.I took the morning off from work on Aug 27, 2014 and waited till 12 noon and there was no sign of technician. So I called Whirlpool customer service number one more time. As you would expect by now, a rude customer service person named Eva from Michigan picked up my call. It was reasonably clear to me during that conversation that the J&H technician no-showed because appointment was not communicated to them. She emphatically claimed that my warranty is not a product replacement warranty but a repair warranty and that she needs to send me a technician to take a look at the product. Can anyone believe it? She told me I have only one option either to accept the perpetual technician visits or she will note that I have rejected their offer to service the product. I told her I am not rejecting anything, just exploring all my options. She assured me I had no other options. The arrogance of these people! So here I am, several thousand of my hard earned money stolen by Whirlpool and I still have no working product. Adding insult to injury, 2 weeks ago I received a letter from Whirlpool pitching me to extend my 3 year extended warranty to 5 years. They want to inflict more pain and charge you for the privilege.I have more options than Eva would want me to know. Luckily I have legal coverage under my benefit plans at work. Even more importantly there is social media and internet. I am pursuing those options at the moment. Heres the summary: Lowes takes my $2700 on March 13th. I get the Wall Oven delivered and installed on March 27th. A total of at least 15 repair visits are made to my home between first week of March May and August 21 (I have started losing count). Time since product purchase: > 5 months. # of times the oven has worked : 0. Hours spent talking to rude customer service reps: 4-6 hours. Time spent at home baby sitting repair technicians : > 100 hours. Lowes, Inc washed their hand stating 30 day money back guarantee is over. Its customer service people were not of any help either. UPDATE 9/15/14:Within a few hours of publishing this post (on 9/2/14), I was contacted by both Lowes and Whirlpool via Twitter. Both the companies seemed genuinely interested in resolving this issue. After I DMed my appliance and contact information via twitter, Melissa from Whirlpool called me and left me a voice mail on Wednesday, Sept 3rd, 2014 informing that they have decided to replace the oven. I was told in that voice mail that I should expect a call from Whirlpool on the details of the exchange before end of day on Friday (Sept 5th). I was contacted by Lowes and I informed the Lowes rep that Whirlpool has agreed to replace my oven.I thought I would really be able to make a single update to the post informing the world that Whirlpool really made amends and tried to hard to correct the failures of the past. It is 9/15/14 today and I havent received any updates from Whirlpool about the how/when of the exchange. I made 2 customer service calls to Whirlpool last week. I was unable to speak to Melissa the first time, but did speak with another rep. She told me she will pass the information on to Melissa and ask her to contact me. She connected me to Melissas voice mail and I left her a voice mail. Melissas voice mail greetings suggested that I also contact her via Whirlpools customer service email for faster response. So I did that too.On Thursday 12:37PM pacific, I received a call from Melissa. She had no useful information to share with me. She is waiting for some paper pusher to do his/her job and could not make any promises as to when it will be resolved. My file is stuck in one of Whirlpools many bureaucratic bottlenecks. This is no personal indictment of Melissa it is just evidence that Whirlpools is not serious about customer satisfaction. My experience is not isolated as evidenced not just by this event but also by the number of people ranting on their social media handles. Here was an opportunity to rectify its mistake and win the confidence of a customer back and so far Whirlpool seems to be uninterested in any such thing.IMPORTANT UPDATE (9/16/14): Please share this story via your social media handles. It is important to hold these people accountable for their actions. It is also important that we inform consumer about the perils of doing business with these organizations. Thank you very much. UPDATE (9/17/14): Whirlpools customer supports twitter moniker is @WhirlpoolCare. LOL. They could have demonstrated care by resolving customer issues, instead they removed my permission to post to their Facebook Page. WhirlpoolCare indeed.:) I will be handling this mostly through Twitter follow me at **. I will be using hashtag #whirlpoolsux going forward. I would request that you do the same. Thank you.https://www.facebook.com/WhirlpoolCare.

They really dont make them like they use to, do they? This Whirlpool Cabrio aka Caprio has given us problems for the past 3 years, weve owned it for 5 years. It doesnt matter how much, or how little clothing you put in this washer machine. It will start going NUTS, Thudding, Banging against the inside of itself, completely out of whack, and then it will show a UL where the time is shown. Every time we do laundry this happens, and we have to stick our hands in the hot water and reorganize the clothes, and pull more and more clothes out till theres only about 3 items of clothing left! This washer is GARBAGE! I advise people to keep away from it. The washer we had in the past lasted us years upon years. These washers of now in days are Crap Garbage. Keep the fancy tech look, and give me the old fashion Knobs ANY DAY! Whirlpool brand is Not what it once was.

Purchased the matching set. Have had four years and need my second service on the machine for issues. It is a top loader and does a good job but the tub is very deep and not made for short people with a few delicate items cuz they are hard to retrieve. I have to use tongs to get them out.

I chose a Kitchen Aid Stainless Steel, Counter Depth Refrigerator from Lowe’s in early February, 2018. (Model #KRFC300ESS) At the time KA was recommended as the best choice. 1) Within a month there were numerous rust stains on the French door and that needed to be replaced and 2) There is the Damper Control unit which makes a intolerable noise until you replace this motor. This noise then returns....about every three months. Plan on paying just under $200 every year for the life of the refrigerator (at average of 14 years= $2,800!). We have had servicemen to our home now 4 times since our 2/7/18 delivery. A local retailer just rated Appliance Brands in 2020 for reliability and the amount of times serviced and found Kitchen Aid to be 10 of the 10 listed. My recommendation would be to try another brand. This one creates a money pit. :(

My mother-in-law purchased a Whirlpool refrigerator in 7/2010. It broke down the first time in August then consistently after that. We have had repair people out multiple times and the issue continues. I called Whirlpool and they said since it was purchased more than a year ago, it is not their problem. You would think that in all that time they would have found a way to repair or replace it. To make matters worse, we have had to call hospice in to care for my mother-in-law, all she wants is to get ice and water out of the door.

The features on the washer is a wider size wash basket, no non-snag agitator with 5 load size choices, 5 water temperature choices, type of wash includes soak, quick wash, normal, deep water, heavy duty, bulky, hand wash, gentle, some other choices Along with a choice to wash your machine, one rinse or two rinses without fabric softener, one rinse or two rinses with fabric softener. And finally a selection for Pre-soak on or off. Also has a 3 light display for what it’s doing, lid lock, pause, cancel and start button. It’s an HE. Clothes come clean.

ECO friendly top load Whirlpool washing machine - I bought this machine September 2013. Now it has a continuous clicking sound. It appears to be the lid locking mechanism and the washing machine will not turn on. It is under warranty and I am finding it hard to get a repair service in my area that is directed to Whirlpool to come and fix it. The only appliance repair in our area states that they will charge for trip and service if they find that is not a defect within the Whirlpool perimeters. I could be charged up to $200 for trip and service which is half of what I paid for. Whirlpool states this is not the case, and I am now having to wait a week to even set up yet another appointment. I have other machines that lasted 7-10 years until they wore out. I am frustrated and what could be a simple fix has turned into a financial nightmare.

My fridge is over 10 years old and the compressor has not failed. I have replaced some of the bins that have cracked or been broken over the years. It is a side by side in black color and will probably replace it with another type but the same brand as long as it is economically feasible to do so.

We bought this on sale but we're really glad we did. I was surprised how quiet it was while cleaning the dishes, insulation I guess makes it quiet. The wife also uses Cascade liquid dishwashing soap which seems to get the dishes really clean. Rinsing before we stick them in probably doesn't hurt, but overall, we are very pleased. The dishwasher has an adjustable rack which we've only used a few times and the start is easy enough for me to even figure out, sorry guys, but yes I do the dishes sometimes. Hope this helps. Good luck. Oh its model # is WDT730PAHVO.

I have a pretty small refrigerator since I live in a condo. It has lasted me about 4 years and is still running very well. It is very easy to clean. I dont buy a whole lot of food at one time. The size is big enough to hold what I buy every week. The appearance is decent. Only two people use it every day. I havent had any problems with the refrigerator in the four years I have had it. I get frustrated sometimes when opening up the bottom storage container. If I pull it out too far, it falls to the floor. This happens especially when the container is full of fruits and vegetables. I guess bottom storage container was designed that way for easy removal to be cleaned. I really like the adjustable shelves. I can adjust them perfectly to store food containers and jugs of milk and other drinks. I like the door shelves in the freezer compartment. It is great for small packages of vegetables.

I purchased model FG1F4040SEPV Whirlpool water heater from Lowes about 5 years ago and have had to literally replace the thermocouple each year. At least 3 of these years we have had to pay someone to fix this for us until we learned to do it on our own. Im very surprised Whirlpool didnt recall these water heaters and make it right for their consumers. What this did for us was confirm that we will never purchase another Whirlpool item ever again. We are switching over to Kenmore!

When the fridge is running and there is a power loss of about a second or so, the fridge shuts down and will not restart (even after hours). I have to unplug it for a minute or so then plug it back in; it runs fine until the next very short power failure. When we are out of town for a few days and that happens, we come home to a fridge of ruined food and a mess. I have contacted Whirlpool (2 times) and they were no help at all. It seems to me a software change could solve the problem, but they are unwilling to listen.

My husband purchased a Cabrio washer and dryer pair for Christmas 2010. I have faithfully used the affresh every month, and spent a fortune on it I might add. But for about the last year or so, no matter that the washer has been cleaned at times when the load is finished there is all kinds of black stuff in the tub and on the clothes. The tray under the detergent dispenser is all black and nasty and impossible to clean thoroughly. The black stuff will come through the holes in the tub as well. Water stands in the bleach dispenser at times, fabric softener does not all dispense, the LID is broken and has been but I cannot afford over 200.00 for a LID and about 100.00 to have repairman to put it on. We do not have heavily soiled clothes that would create excessive dirt, never have had and we are now retired so we surely dont now. Bottom line, I thought maybe this would be the last washer I would need but I hate it. It is only 5 years old but I am stuck as I cannot afford a new one now. Factory rep says if it is cleaned as it should be, I should not be having this problem. Not true, it has been cleaned as recommended!!!

This is a freezer on top unit. Purchased in 2015, unit quit cooling, started making a roaring noise. Called local technician, he added 2 oz of Freon, said he has seen many of these same unit losing Freon. Technician said line that goes to compressor is copper and hooks up to aluminum line before attaching to compressor. This is leak point for freon; no way to know when the leak started, but freon almost gone and cost to pressure check for source of leak is costly and probably would not repair problem. Got 6 yrs out of it and I am replacing with another brand. Will never buy Whirlpool again. Should have got 10-12 yrs of use. Do not buy this unit. Wrote Whirlpool first, but no help. Indicated this could be a problem with these units but no recall so I am on my own. Out $900 for a new refrigerator. Big hassle. Unit no good.

I purchased a top load Whirlpool washer from Lowes 2-8-12. It got so it wouldnt rinse. When it came to that cycle, it just skipped it and went directly to spin. I dont know how long it was doing this before I caught it. A repairman came out said I would need the equivalent of a motherboard that would cost $330.00. Needless to say, couldnt afford that amount for repair. So I purchased a very nice used Amana for $100.00. I always thought Whirlpool was a top of the line product. This has changed my mind. If it wont last any longer than 5 years I dont want it. There are just the two of us and we are retired so the machine was not overused. I am so disappointed and angry about this.

Bought all Whirlpool appliances for my home and the dishwasher doesnt work right and all that they can tell me is its not even 7 months old. They dont have any repair technician around where I live so Im on my own to get it fixed. So much for getting your moneys worth.

The Whirlpool microwave has been very reliable and efficient. I like its multiple functions, from heating up leftovers to defrosting meat and poultry, baking potatoes. All the functions are easy to use.

Purchased a new oven 06/2016- today, I had Sears come and look at the issue. Need a new Control Board/ $750.00. Called Whirlpool, they will not help, or give me an explanation of why this expense is justified. Very dissatisfied with product; will not recommend, nor purchase again.

I purchased this monster in 2012 and after six years of enduring not enough water to actually wash the clothes for years, now the bearings have gone out making it sound like a jet engine is in my family room when it spins. After researching the bearing issue, I find it will cost $250 to $300 to have them replaced. Its also a common problem in this model even when the washer isnt at all worn out and old. That combined with the fact that my clothes dont smell clean and some blankets come out not even wet at all, Im done. I wont ever buy a water efficient washer again. Churning the dirty underwear around with a few cups of water isnt acceptable. NOTE: The bearings left months after the extended warranty expired. Just like clockwork. I purchased a much cheaper - center agitator - washer with a deep water option available. It was half the price of this top of the line Whirlpool Cabrio Washer.

Top loading HE machine. Washer does not clean. I have tried all manufacture recommendations, changed detergents and tried laundry boosters, all to no avail. Tshirts, pants and socks routinely come out of the wash dirty and must be re-washed. This negates any energy savings. Also, the noise from the spin cycle is very loud - the washer is on the second floor but I was told by sales person that this would not be an issue with top loader. Overall, very disappointed and after all these years, I have finally given up on this washer and will junk it.

Sole owner/operator for 6 years using same products that came packed with dishwasher. Bottom rack has simply crumbled away, prong by prong at first and now large sections. Inferior quality of coating and metal used for the forms, means it wont withstand the daily use for which a dishwasher is intended. Worst quality control ever!!

I have had my Whirlpool Washer for many years. It agitates well and my clothes are always clean. They are easy to dry. The wringer wrings out all the water, yet they stay damp for ironing. You will love this machine. I am happy with it and hope it lives for a very long time.

This is a good looking, inexpensive stove/oven. Stove top has four burners. I liked the split grates on the stove top. Its easier to remove and clean. I do not like the rubber seal on the oven door. I am used to the heavier duty seals on most oven doors.

My new ACCU-BAKE oven was not baking properly. Always uneven results. Finally called for service, just in time before the warranty expired. The service rep informed me that I had not bought a convection oven. Well, duh! Of course, I knew that! He tested the temperature levels inside the oven and found a variance of 10 degrees Celsius, which he reported by phone to the company. He advised me to reach into the oven half-way through any baking process to turn my cake around, and it would bake evenly. I asked him if he had ever tried that himself. No, he said, he was not a baker. That was the end of the service call. No follow-up, no service. Today I learned that the company actually has this exchange in its records, but if I want to get the oven to work properly Ill have to pay for service, as the warranty has expired. I wonder what would happen if I ever tried the self-clean or Sabbath mode features on this oven.

6 years ago, we bought the refrigerator, the oven and the dishwasher. Theyre all Whirlpool appliances. With that, we took the 5 years guarantee extension for all those appliances. After 6 months, the electronic front panel of the oven jammed. The repairman knew what was the problem and had to change this panel. Then a month before the expiration of the guarantee extension, the refrigerator never stop running. I have to call them 3 times before they place a service call at the right place, very strange. Now, the auto-clean on the oven doesnt work. The very known E1-F5 error on the display and no solutions that work. Whirlpool, never again and I will make the real publicity for this brand without a shame.

My Whirlpool refrigerator/freezer stopped cooling just after a year. I had to buy a $319 warranty. It was fixed, but broke several months later. The repairman said he would try to stop the leak and it worked for a couple more months. The refrigerator was obviously irreparable and we should have had it replaced by Whirlpool at this point. Now, that it broke again (stopped cooling and freezing) the repair service is giving us the runaround. Its over a week and they wanted us to call a repair service and they would reimburse them. The repair service and Whirlwind know about this problem, but refuse to acknowledge it and are getting away with it. With all the comments Im reading here, there should definitely be a recall. Id like to know what it takes to have one authorized.

After one of the door shelves in our new refrigerator cracked, I ordered a new shelf from our local agent Neuman Appliance repair in Ashmore, in July of this year (2014). I was told that it would take a while as Whirlpool were notorious for poor service; however, it is now the middle of September, and we are still waiting!When we ordered a new part for our dishwasher from Fisher and Paykel, we received the part in just 3 days. I mention this to give an idea of what good service should be.

I bought a new Whirlpool gas range a few years ago. I am now trying to purchase my 3rd control panel at a cost of $281.00. The oven will not bake or broil. The oven now a provides storage area until we can purchase a new range, which will not be a Whirlpool or any brand associated with Whirlpool. Very Dissatisfied.

This WP stove is so easy to use a child could do it. We use the built in timer all the time, not only when using the oven but timing items on the top of stove as well. Speaking of the oven, the self clean not only cleans but it leaves the oven sparkling. We love it.

Updated on 07/09/2020: This fridge freezes produce. A part was replace to solve this problem but it has never worked properly. After several attempts to correct temperature fluctuation, Whirlpool decided it was working within their specs and advised us to set the temp higher to solve the problem. So we are doing that but now if the temp is too high the ice is watery and falls out of the ice compartment when we have finished using the ice dispenser. So we lower the temp and it again freezes the produce. Do NOT buy a Whirlpool!!! If you have any questions look at whirlfreezefood story...Original Review: Purchased September 2019. Worked for a couple weeks and then Freezes the produce. I have put it in the center drawer and in the main fridge still freezes. Go to ** for full story and recording of a message Whirlpool left me.

In January 2011, we bought several appliances and a refrigerator was one of them. The model number is G15VAXVQ01 which is a side by side, French Door Ref with water and ice on outside. We have had problems with the very cheap plastic drawers that are at the bottom of the refrigerator to hold vegetables and meat. We have to be extremely careful so they will not break when opening the drawers. As of late, the fruit and vegetables have been freezing. I went to change the temperature on the outside gauge and dropped the control to 33 degrees and it stuck there. I tried to unplug the refrigerator to reboot the system, to no avail. The temperature is stuck at 33 degrees which will freeze most of our food in a few hours. The freezer side temperature gauge does work.We also have problems with the ice/water machine. I pushed the water button a week ago and from then on, I couldnt get the ice to come on. I did unplug the refrigerator to reboot and then I was able to switch over to the ice, but I could not get back to the water side. Also, there is no crusher on this machine so the ice comes out in chunks. If we had to do over again, we would not buy a Whirlpool as it appears that they are not interested anymore in quality products and consider cheap junk something to be desired. Not by us! We will get this albatross fixed and see about getting rid of it. It is a buyer beware market so I suggest others beware of Whirlpool products.

Purchased this washer 7 months ago. We are a family of 5 with A LOT OF LAUNDRY!!! I adequately researched a machine that could do large loads of laundry, WELL. I read at least 100 reviews and went forth. (Note to self that anyone giving this machine a decent rating, is a DIRTY, SMELLY, FILTHY LINEN WEARING FOOL who doesnt take much pride in their clothing cleanliness.) I proceeded onward and after paying A LOT OF MONEY for this 4.8 Whirlpool Cabrio Washer, I found out within the first two days of owning it, that IT IS GARBAGE! Regardless of the 4.8 drum size, you can only fill it less than 1/4 of the way with clothes, to even hope they will be touched by water. My clothes come out DETERGENT STAINED & DRY! Insanity... A washer that doesnt wet the clothes!!! We have had 4 repairmen come out within this time, because I am fed up! I have been physically shown and told now, by all 4 guys, that the washer will not fill more than 9 inches with water. They advised me to fill Home Depot buckets and throw them into the drum. THIS IS WHAT I DO, TO SATISFY THAT I AM WETTING MY LAUNDRY - PURE CRAZINESS! The repairmen told me to set all loads to bulky sheets + extra rinse + highest soil. This is a 1 hour, 26 minute initial setting. Note that my adding water messes up the computer readings and it will reset throughout the washing cycle multiple times. Even with all of this... the machine still doesnt wet the clothes!! The top and center of the load is BONE DRY! This machine will not wash sheets, blankets or comforters, either. Dont waste your time trying!!! Dont be fooled by the drum size. Your great grandmothers 1930s 1.6 cu ft washer washed more clothes in any given load. #1 My water bill is through the roof. #2 The washer constantly resets and runs on any single load for over 2.5 hours AND #3 MY LAUNDRY PILES HIGHER AND HIGHER, as you cannot put more than a smattering of clothes in the machine, at any given time! GARBAGE, GARBAGE and MORE GARBAGE!!! I would be better served to find a stream and a flat rock and start doing my laundry colonial day style! I am done... Finally had enough of this insanity! RETURNED THE MACHINE THIS MORNING!!!

I purchased my Cabrio a little over three years ago. Within the first month, the computer board had to be replaced and the tech informed me that it was not a malfunction in the unit; rather, it was because I did not have a sock bag for my socks and panties. I replaced the board, bought a sock bag and had no problems for about 1.5 years. A little over a year ago, the un-level started. I did research and found that I needed to replace the rods and add couplers as they were not thought of when the unit was created. This worked for an entire month. Now, I am in the same position again. It takes about 6 tries per load and the amount of water I am using is increasing with each failed attempt to wash. There should be a recall on this product. I notice there are many other complaints that match my frustrations exactly.

I purchased this Whirlpool Gold dishwasher a year and half ago, and it needs repair to the tune of $300.00. The drain pump broke and need to have it repaired. If this was the only Whirlpool appliance that went bad, I wouldnt even write a review, but two months ago my Whirlpool refrigerator, one year and 4 months ago, the ice maker stopped working, another $300.00. Whatever you do, do not purchase any Whirlpool products, pure junk. Their customer service is even worse. What a nightmare.

My Whirlpool washer is lasted 15 yrs and is very good at cleaning clothes, it is also easy join my water bill. I purchased mine at Home Depot. They also finance. I hope you enjoy your purchase. I know I do.

This is the worst washer Ive ever owned. It consistently gets off balance, doesnt clean the clothes, and is a perfect example of poor design. I have owned the washer for approximately 9 months, and hate it. Im getting rid of it as soon as possible.

We bought Whirlpool duet front loading washer and matching dryer. In 3 years the water level seemed like it was off. Clothes, especially towels were coming out stinky. Eventually you could hear the clothes were merely flopping around wet. Before we could order the repair part it completely quit and locked our clothes into it. I washed my clothes at my daughters house for a week and dried them at home. Within the week the dryer quit. Not having the money to repair both machines, my son gifted me a set of top loading washer/dryer. Again Whirlpool. In a week we had repair service out. They replaced everything possible and it still didnt work right. Since the 90 days from purchase was approaching we returned it to the store and they had Whirlpool send us a brand new dryer. This one worked for a month then stopped spinning. I havent called for service yet because now with 3 broken machines I am so disgusted. When I think about them I feel like I am going to puke. My washing machine shouldnt be the worst thing in my life, especially since it was a lovely gift from a wonderful son.

I bought Whirlpool dishwasher (silver, Golden Series), after one year it just stopped for nothing and the circuit controller failed with error code E2/F2. So it was expensive but turned out to be totally unreliable. I had to pay $200 to get extended warranty and still waiting for the parts!!! Worst experience ever (uh Golden Series, for me it is Plastic Series). Will never buy any product from this company again.

Whirlpool Double wall-mounted Oven model#WOD51EC7AW05. Have had nothing but problems (at least 7 problems). The 1st one is a potential fire hazard. Porcelain/enamel shattered on bottom interior panel of BOTH ovens in less than 60 days (exposing underlying metal to rust). Cracked in an odd stress-pattern that indicates the metal expanded during heating, and the porcelain finish did not tolerate the expansion. The lower oven had only been used 2X before I noticed the fracture pattern. Obviously faulty design; a manufacturers defect. Whirlpool claims it is cosmetic damage and when porcelain eventually flakes off, they will send me touch-up paint. (If I dent the outside of an appliance with my wheelchair, thats cosmetic damage. Its a manufacturers defect if the damage happens during normal operation. The appliance damaged itself, not the user.)The preheat function does not work on either oven. The oven indicates it is 350-degrees, when it is actually 125-degrees. Repairman says this is normal; ignore the indicator and navigate by store-bought thermometers”. The temperature can vary 50 degrees on either side of the actual setting (thats a 100 degree range!). Between the faulty preheat and the wide range in temperature, it makes it very hard to bake bread or cake.The rest are annoying problems: The timer is a single “beep” (not even very loud), followed by another single beep every minute. This is not much help if you are folding laundry while the cookies bake. The windows have so many dots on them theyre not clear enough to see how the food is cooking (or read the store-bought thermometers) without opening the doors. The oven produces a lot of steam that fogs up the windows (Ive never had this happen, and Im past the half century point). The exhaust fan is loud and it blows hot air into the drawer under the oven (another potential fire hazard). Dont buy this oven. It has several design flaws and Whirlpool does not stand behind their product.

We purchased a Whirlpool over the range microwave WH32L19AS1 just over a year ago. {No we didnt buy the extended warranty.} We were reheating some food in the microwave at noon the other day and the microwave made very loud bang and started to hum really strange. We have since discovered the Megatron or something like that has gone out. Just parts $150.00. So we decided to trash the broken Whirlpool microwave. We did some googling and discovered that there is big trouble with this product.

Special features eg changing HE detergent conc. ratio for auto add feature in Load and Go is impossible to find, extra rinse doesnt work. No extra spin which would be useful for bulky loads. But preset cycles work fine and machine has very low vibration a big plus.

Im 61 so I have some experience. I personally know fridges that have lasted over 20 years. I just Googled it and found out the norm is 14 to 17 years. This hunk of crap lasted 4 years. As soon as I got it home and plugged it in (4 yrs ago) the most noticeable thing was the noise. It sounded like a tractor! I considered taking it back (wish I did). Then after a couple of years the pull handle came off! The whole time we had to be careful the door was closing properly. It was problematic. Ive owned (and re-sold) about a dozen fridges in my life. This the first one to fail on me. It was bad from day one!

I purchased Whirlpool Refrigerator model WRF989SDAM02 in June of 2014. I began having problems with the ice forming into a solid block shortly after having the refrigerator installed. I called for service several times over the next year trying to rectify the problem. Once the warranty had expired I continued upon the advice of Whirlpool Customer Service to schedule their certified Technicians to work on the problem. A year and a half and several hundred dollars later I am still unable to get ice cubes when desired.Ultimately I was advised that I would need to use the ice maker once a day to keep it from forming into a block. When this didnt solve the problem I again contacted Whirlpool, had another of their recommended service technician come and give his advice. I was told that the ice maker needs to be in constant use or it forms a block and this is a defect in the design of this unit. A Pro Tech Appliance Inc. Technician, an authorized Whirlpool technical representative, said the only way to have usage of ice would be if I made sure to dispense ice a minimum of 8-10 times a day.This is completely impractical and just plain ridiculous. I contacted Whirlpool again. They refuse to acknowledge this is a defect in the design of this model. I have replaced all parts that can be replaced, had the unit resealed and have paid for multiple service call. Whirlpool will provide no remedy for this problem. Now that the unit is out of warranty they have refused to provide a resolution even though its issue began while still covered under the year warranty. The ice in the ice maker is completely unusable and melts into a solid block within 24 hours if not in continual use.

It gets the job done. Its no power washer, but the dishes get pretty clean and dry nicely. I have no idea how dirty the dishes can be and still get cleaned, since Im weird and pre-wash my dishes. Its stainless steel and black, and has quite a few wash and dry settings, including an option for heated or unheated dry. The utensil rack is attached to the door of the washer and cant be moved. Two levels, and pretty easy to do dish tetris with. No offense to most standard dishwashers – I need a washer about 3 times the normal size due to a passion for cooking. Its slick and matches my ultra-modern, borderline-Swedish interior.

They sold me a washer that did not work. First load failed and the machine locked closed. Error E1 F9. Took 7 days for technicians to open the machine. The laundry was rancid by then. Needed a new drain pump motor, which was installed 37 days later. Whirlpool offered $150 for my loss of clothing. Ridiculous. Value $900, I asked for $500. Awful.

We purchased a whirlpool gas dryer 30 years ago this past February. Its still going strong with 30 years of continuous use!! The only service ever required was a belt change I did myself 18 years ago. Not too bad whirlpool!!

Purchased a Whirlpool refrigerator July 29, 2015. Our first service call was August 4, 2015. The units freezer was frosting over, the basket rails were covered in frost, which made it hard to open. Items in freezer containers were covered in frost and labels unreadable. The interior light was frozen shut. Since the first service call we have had 8 service calls with multiple appliance dealers. No one can fix the frost issue. It just keeps recurring. Whirlpool did step up and extend our warranty for another year. In order to schedule a repair we have to call Whirlpool, a 45 minute phone call for an appliance company not of our choice to make the service call. The unit has been removed from our home for repair in dealers shop. Very inconvenient for us to have no refrigerator. Whirlpool has refused to replace the unit, choosing instead to patch-patch-patch one service call at a time. Whirlpool has enjoyed years of an excellent reputation. We are very disappointed. This is no longer true.

Whirlpool cabrio top load washing machine sounded like a jet engine taking off on spin cycle then started spewing grease on the floor. Called hotline with make mod ser #. Repairman came out 5 days later. OOPS! Whirlpool made a mistake, repairs not covered. Please pay repairman $450. Should have had him make the repairs then threw him out of my house.

We bought all whirlpool appliances at our new home 4 months back. Our refrigerator has stopped working from the last month. We had 7 different service team people come in to check and they temporary resolve the issue (taking out a plastic piece from the top of the refrigerator, just re fixing the ice machine, or just walking out of our home doing nothing).Friday someone came and tried fixing it and took about 3 hours. The fridge completely Broke down after that in about 6 hours. Whirlpool customer care wants to send another technician in and want them to have them talk to their technician and maybe after that they can do something. This is the 8th time some technician will be coming home. And clearing these technicians curse whirlpool and dont call them. The customer team at whirlpool suck, there is no damn replacement or repair policy. All scheduling is after a week and whirlpool does not give a **. I really hope this company is sued for the emotional and mental stress and the harassment they cause to their customers. Very frustrated. Have no idea what to do.

I just purchased a brand new refrigerator from Whirpool and after 2 weeks been delivered I started having a lot of issues. They sent a technician twice to get it FIX but Im still having the same problem. And they dont want to replace the unit. They want to keep sending technicians to make the same repairs. Its a NIGHTMARE!! Please do yourself a big favor and buy a different brand. I dont recommend!! By the way this appliances are made in MEXICO!!

I would like to invite everyone on here to join me in a moment of silence. My Cabrio has died after a little over 2 years of pure torture that I purchased for $1000 from Lowes. I have had nothing but problems since the day I bought this washer. I think Whirlpool needs to step up to the plate and take responsibility for the mistakes they have made. I will never purchase another product that is in anyway associated with the Whirlpool company. I wish I had my little washer that only needed a new switch back. I guess I am off to find a replacement for this $1000 mistake that I made. If I had the resources, I would file a lawsuit against Whirlpool myself.

LED Freezer Lamp stopped after eight months, $14, not covered under warranty. OEM water filters are costly. Icemaker is noisy, ice dispenser chute clogs. When refrigerator was set at 38-40 degrees the eggs and most top and middle shelf items partially froze. Noisy compressor. Good price from Home Depot sale in Nov. 2019.

Whirlpool makes a beautiful product that does not last. I bought model WRX988SIBM in April 2015. Two years later the compressor is bad and no warranty coverage. Do not buy this model. It does not carry the Whirlpool 2-5 year sealed refrigeration warranty. Its amazing that an appliance that retails over $3K only comes with a 1 year sealed refrigeration warranty when Whirlpool offers it on other models. Be sure you know what your warranty coverage is before you buy any Whirlpool product.

In June 2010 my wife and I bought a new Whirlpool water heater (model ee2h50rd045v). As I have fairly extensive experience in both the electrical and plumbing areas (was head lab technician for an aquatics lab for 7 years and worked with maintenance on a farm for 10 years), I installed the unit myself. Two months later the motherboard fried. Whirlpool sent me a replacement and all was fine. Six months after this the motherboard fried and set the unit on fire. Luckily I was home and caught it before it got out of hand and the circuit breaker had tripped when this happened (the circuit breaker saved the house).After I had ripped the smoldering unit out of the garage I immediately called Whirlpools Customer Hotline and told them what happened. They said they would send me replacement parts. I reminded them that the motherboard had fried once before and that this time the unit had almost cost me the house. I also informed them that I have now worked for Lowes for 4 years and I am responsible for selling their product (in addition to other brands). The lady stated all they could do was send me new parts and the problem probably was with my circuit breaker. I informed her the circuit breaker was tripped so the problem was not there. She reiterated that all they could do was send new parts.The next day I started to remove the control panel and motherboard to find that the plastic had fused itself to the frame and insulation. I called the customer hotline and spoke to someone new and informed them about the new problem with the melted plastic. I was told that the melted plastic could be scrapped off safely and that since the problem was not the circuit breaker, the problem must have been how the wires had been spliced from my conduit into the water heater. The gentleman then proceeded to tell me how to do it in violation of Maryland code and told me he would have replacement parts sent to me. I checked with a certified electrician to make sure my wire splice had been done in accordance with code and he verified I was correct.I then had a Department Manager call Whirlpool. He was given the same runaround and told the parts would be mailed to me. He was also given the story about how the malfunction was due to the wire splice being too tight. He then asked to speak to the representatives supervisor and she told him she would not transfer him over to her supervisor. I have forgotten to mention that 2 months prior to this, a Whirlpool water heater (same model) had been returned to my Lowes store within the 30-day purchase window. The unit had caught fire. Since I had had problems with my unit motherboard at this point, I took that unit apart to see what had caused it. The problem started with the motherboard in that unit also. This is unacceptable. Whirlpool obviously has product quality issues.Sometimes bad units are put out. This happens with every brand. But when the same model has such a high failure rate and is known to catch fire, Whirlpools actions are inexcusable. Currently my refrigerator, oven, dishwasher and obviously the water heater are Whirlpools. I will not replace either of these units with a Whirlpool when they reach the end of their operational periods. Also in the future when customers ask me about Whirlpool appliances, I will be sure to tell them just how great Whirlpool is, how reliable they are, how great their customer service is and then quickly usher them over to Samsung, Frigidaire and Electrolux appliances. The department manager that had called Whirlpool for me has shared similar sentiments about future customer recommendations.

This is the worst washing machine we have ever owned. We purchased the Whirlpool Cabrio washer and dryer set at Lowe’s in Loganville, GA on 04/11/2010. Today is 02/22/2013 and the transmission is shot in the washer. It began making an extremely loud and terrible noise during the rinse and spin cycle. We called a local and trusted appliance repairman, and after his diagnosis including estimate to repair the washer, it totaled over $525.00. This is a terrible washer. I will never ever buy a Whirlpool appliance again. Oh, forgot to mention we have purchased four (4) major appliances from Lowes over the past 2 1/2 years in addition to purchases for our plumbing business and wont do it again! Also, Whirlpool couldn’t care less and there is just one complaint after another for the exact same problem online.

I purchased the Cabrio washer and dryer and paid for the extended warranty from Lowes about 5 years ago. After about a year, the washer had problems with excessive vibration and noise. Under Lowes warranty, a repairman came and adjusted the level. He came out several more times and made other adjustments, replaced the drum, then bearings and raised the level again. He said he could not declare the washer a lemon, even though it was because they were told this was taboo. They were instructed to do whatever they could to keep the washer going throughout the life of the warranty. Now the washer stops mid-cycle and an fl or f1 error code appears on the control board. I contacted Customer Service who said I can purchase another extended warranty for over $300 or pay their repairman for the visit including parts and labor. What I paid for the extended warranty and to purchase a new one would pay for a new washer.

I called in a claim on June 10, 2016 & my washer is still not repaired. The extended warranty company, AIG sent L&W out to repair my washer. After 3 visits its still not repaired & the technician hasnt fixed it. Not only that he had laid it on concrete & scratched the outside. This is the worst experience Ive ever had with a warranty company or service company. Aig wont even return my calls. Will never buy a Whirlpool appliance again.

I owned a Kenmore washer for approx. 20 yrs that endured 6 kids for most of that time period. When time came for a new one, I had to have the latest model, and settled on a Maytag Bravos approx 3 yrs ago. This was a huge mistake - I paid between 600-800 for this machine, and it is a piece of garbage. The repairmen here yesterday explained to me that Maytag and Whirlpool are now the same company, and also that all these machines are now made overseas because of cheap labor. In a nutshell, I was given an estimate of at least 300 to repair this piece of crap - he explained that they are only made to last a few yrs -where is the justice in this situation? I really dont get how these big companies get away with selling crap, knowing all the while that the consumer is getting screwed - yet people continue to buy them..

It looks like I have the exact same problem as everyone else. Purchased an Energy Smart Whirlpool water heater at Lowe’s. Now I need a new controller. Hope they send me the non-catching fire type of controller.I am going to predict that the company will provide a response that says something like” “Hey, we really want to help you get your hot water back! Just contact us privately so we can discuss this without everyone being able to see what we tell you to do.” So far we are just out of hot water while we went through their diagnostics. They told me that this often happens and the best way to fix it is to let the hot water run in the shower for 20 minutes, then hold down the reset button on the controller for 5 seconds, and do that every time I experience this problem. I hope mine doesnt catch fire. Fire is bad.

Purchased Whirlpool Cabrio model WTW6400SW washer and dryer 1/7/2007. The matching dryer was dead on arrival and the second dryer motor died within a year. Washer: 1year 2 month the washer motor died. Whirlpool paid for the part and I paid the labor. The following year, the bearing went out and the outer tub was replaced (the bearing is inside the plastic outer tub - bad design. Whirlpool paid for the part and I paid the labor. Feb. 2011 had one of the F errors. Whirlpool repair tech came out as the tub would not drain and it was a wire that had come loose underneath washer - another service call charge. Dec. 20, 2011, I had an error F50. The Whirlpool repair tech came out, verified no clothes or money stuck in the machine. All clear. He called higher level whirlpool tech and they paid parts and labor to replace the main control board and the RPS Sensor. Im single and am not abusing this machine. Like everyone else who posted. I paid close to $1,000 for this washer (not including the dryer) and I have been a faithful Whirlpool customer for 3 generations, but if Whirlpool doesnt offer some kind of compensation/trade in credit to customers who purchased this (knowing that the design is bad/faulty) washer and discontinue this model. This will be my last Whirlpool. I will have lost all faith in Whirlpool. The Whirlpool service tech that I found is op notch. I will miss him if I have to switch brands. Im putting 1 star as I know this machine will not be operational for 9 years which is the minimum that I would expect. If it makes it to 6 years without another service call, it will be a miracle.

Whirlpool Cabrio Washer WTW7340XW sounds like a small jet during spin cycle. The Whirlpool Cabrio Washers have a very well known and well documented problem with the tub bearings failing. Many many disgruntled owners have posted their complaints online, and there are many videos showing the issue on youtube. This issue is so prevalent that the manufacturer has created a tub bearing failure repair kit for $350. The repair is so expensive and labor intensive that many of the certified Whirlpool repair shops no longer work on the Cabrio washer stating that a better washer can be purchased for the cost of this repair.That said, the manufacturers customer service group denies that the Cabrio tub bearing failures is a common problem and are quick to state that Whirlpool holds no liability for this problem. Ramping the complaint up to a customer service supervisor is met with the same canned response. Regardless of the thousands of complaints Whirlpool is claiming that it is normal wear and tear for the tub bearings to fail. The manufacturer should recall the units for this manufacturing defect in the Cabrio design.

We got a brand new bottom freezer french door Whirlpool refrigerator in our brand new apartment. Since we moved in last week the temperature control in the refrigerator box has failed three times. The freezer stays cold but the coils are frosted solid and no cooling gets up to the refrigerator box. We turned on moisture control but that didnt help. The users manual is completely useless and in fact doesnt even match the control panel. The numbers for temperature settings on the instructions dont match the numbers on the panel.We had to turn off and thaw out the unit completely three times already and this is just the first week! Last night the building maintenance guys came in and sprayed the back panel of the freezer with warm water. He said he talked to the GE tech, who suggested we also increase the freezer temperature settings to 4 and the refrigerator to 44. But this morning the temperature rose again. It sure sounds to me like the daily defrost cycle isnt running at all and nobody wants to consider that possibility. Thaw the unit several times a week is completely ridiculous. Our food has experienced so many temperature excursions who knows whether its any good now. I cant wait to get my first taste of salmonella. This is what you get when you combine junk with poor service.

This is a Whirlpool dishwasher that has been functioning for 25 years! Much better than any of my 4 newer appliances. It has never had a problem. It is easy to load and unload. The dishes are always clean. Dread getting a new one.

I bought my Whirlpool top loading washing machine 07-22-14. I so dislike the locking mechanism and will be certain to never, ever buy a machine with that feature again. It is so irritating to try to add something but cant because its locked so have to hold the button 3 seconds to unlock and start all over. If there was any way to get around it I would. I will stay away from Whirlpool products in the future and will be sure to check the next time I buy that the lid of the washer can be lifted when not spinning. Also, I do not like that it sticks on rinse sometimes and the only way to end a cycle is to hold the button and then start over with much wasted water.

I bought this fridge 2 years ago. I had multiple repairs already. Now the side panel makes noise when you shut the door. Repairman told me it is the foam separating from the side panel. There is nothing that can be done. I also have extended warranty.