We purchased a Whirlpool Gas Water Heater (Model No. N40T61-343) from Lowes in the Summer of 2013. 2.5 years later, the water heater goes out as of 01/19/2016. Therefore, I contacted the telephone number on the side of the water heater in order to restart the water heater. We followed the instructions by pushing in the pilot button, as well the ignition button. To no avail, the water heater did not restart. I called customer service on Thursday (01/21/2016) to speak with a representative. She said that we needed another Thermopile and a Gas Valve replacement. So, who is going to put it on? It would cost as much as getting a whole new water heater. Therefore, we are going to Menards to purchase the Richmond Gas Water Heater. We had a Richmond once before; and it lasted from 1999 or 2000, until 2013.After reading all the reviews about this brand water heater (Whirlpool), no wonder people are complaining. Ladies and gentlemen, do yourselves a favor and not buy a Whirlpool Water Heater. The only thing that Whirlpool is good for is only their name. Their Water Heaters in particular are worthless pieces of junk. NEVER BUY A WHIRLPOOL GAS WATER HEATER AGAIN!!!

The washing machine has been through 4 boots. The boot material is so flimsy, that they tear constantly causing water to leak out of the machine. There are times it is minimum water, and other times a lot of water.

I bought a whirlpool Washer in 2011 which I bought an extended warranty. Thank Goodness! It has broken every year. At first I was ok since they always fixed it. It is very inefficient and the clothes are not clean. But today I am so ticked. It broke in Sept. and they have come out twice and cant fix it. Now they say it will be Dec. before they can fix it as part is backordered. REALLY!!! Im expected to not have a washer from Sept. to Dec. with no compensation! I have called both Whirlpool and the warranty company and they say thats just the way it is. I WILL NEVER BUY A WHIRLPOOL AGAIN. The warranty service is through Federal Warranty Service.

I bought my refrigerator model GX5FHDXVQ0 in 2010 and after this short amount of time, the control board went out. My repair cost was $446.05 to have it repaired. The refrigerator cost over $2,000 and to have to spend nearly $500 on repairs after only 2 years seems way beyond reasonable. I have Whirlpool appliances - washer, dryer and dishwasher - in my home and thought it was a very reliable name. I am very unhappy after reading customer complaints about the very same thing happening to them. I can also see that the company Whirlpool is not very concerned with customer complaints. I find this very disappointing. I will not recommend their products anymore nor will I purchase any Whirlpool products.

I bought a Whirlpool washer WTW4800XQ top loader. I have owned it for about two years and now it has tore up, the repair bill will cost almost what I paid for the washer. I feel it is bad business to sale something and it not last any longer than it has. No one should have to buy a washer every two years!!!! When it gets to the spin cycle it works fine and then all of a sudden it will beat and bang and if you dont get it stopped it will be in the middle of the floor. Im very upset and put out with Whirlpool!!!!

The washer started to show error code for the door and washer would not restart. After removing the top of the washer and checking the door switch to see if there was a loose wire, I traced the wire back to the micro control unit, and upon inspection of the micro control unit, I found that the terminal that the door switch wire was attached to was loose and not making contact with circuit board.Although the washer is out of warranty being 7 years old, this is clearly not a part that is subject to wear and tear. The part was clearly manufactured poorly. I looked on the internet to purchase a new part but it seems that all micro control units are out of stock. This makes me wonder if one should start a class action suit as my part could be one of hundreds that was poorly manufactured. I called Whirlpool to see if they would send me another part to replace the bad unit but they said that because the washer was out of warranty, they could not help.

My agitator-free washer began tearing small holes in my clothing and sheets about one year after purchase. I contacted Whirlpool and they sent out a service person, who ran a diagnostic test on the washer and said it was fine and I should learn how to wash clothes and load the washer, etc. The barrel of this washer has little holes and I believe that when it spins the clothing, some pieces may stick in one of those holes causing tearing. The service person also told me that my clothes were old. I guess that means this washer is not for washing old clothing. The tears in my clothing are in places that are very unlikely to tear, like the back of my jeans behind the calf of a leg, about half way up from the ankle. There are holes in my tee shirts at the bottom of the back. Even if I were a smoker, which I am not, I would not likely burn holes in those areas. Whirlpool obviously does not want to accept responsibility for this problem, even though there are many other people having the same problem with this type of washer.

I Bought the Whirlpool Duet Steam Mod#: WFW95HEDC0 in 2015. I have always wondered how a machine can get clothes clean with less water but liked the idea of the energy star and saving water. However, I found that I was right and the clothes do not get very clean. They do not even get all wet hence the dry feeling when they are done. I just recently got a little frustrated at having to rewash some things by hand afterwards. I started to pretreat and wash out stains by hand beforehand. That helped some. I finally stopped the machine after all the water was done filling it and it tumbled a bit. It looked like it was wet from the window but when I dug through the clothes I pulled out a t-shirt that was almost bone dry. Some of the other thicker clothes like jeans etc. had a lot of dry spots too. This is why the odors don’t come out and why spots and lines are left where the dry meets the wet. There just isn’t enough water get all the material wet. I then proceeded to pour a pail of water in to get all the clothes wet. When I started it back up, it drained some of the water and I still had the problem. So now I get all the clothes wet in the sink before I put them in the washer. It’s amazing how clean they got and they didn’t have the body odors either. I think this machine would be fine if it could be reprogrammed to add more water for cycles. I know that would change the “Energy Star” but this water saving idea is bogus if we have to rewash and add more water to the cycles. At this point I will be looking for a new machine that doesn’t have the energy star but allows me to adjust the water myself. I do not trust these machines anymore.

Found after care service as bad as oven performance. Phoned for advice and told need to get used to new oven. My advice would be do not buy whirlpool ovens.

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

Our machine was bought via the employee purchase program. Its just under 2 years old and the bearing has been out for nearly 6 months. I called Whirlpool and our local Whirlpool repairman. They both want hundreds of dollars to repair it. Being pretty handy, my husband and I decided to fix it ourselves. Trying to find compatible parts for this model is a NIGHTMARE. Everything in my house is Whirlpool...range, dishwasher (also junk), microwave, fridge, washer, dryer...and it will all be systematically replaced with ANYTHING BUT WHIRLPOOL OR ITS COUNTERPARTS.

My refrigerator is 6 months old and already has rust and leaks. I am told it is because I live too close to the beach. Do not buy their sub-par products which come along with absolutely awful customer service. Will never purchase anything Whirlpool again.

I have recently installed a Whirlpool water heater and was thankfully home when I heard a pop sound and my water heater had exploded inside. The heating element also caught fire. I called customer service and was not satisfied with the response from their customer service team.

I purchased GMH6185XVS microwave in Dec. 2011. It was installed in January 2012. This was for a remodel kitchen with all Whirlpool appliances. In August 2014, we discovered the micro would not heat. I called Whirlpool as directed by Sears. I am told I have to call a repair service and pay for it. I have a 14 year old Whirlpool in my home. We have never had a problem with it. I had a Whirlpool micro in my previous home; never a problem. This is a second home that we hardly ever use. We are two adults. My daughter had the same problem with the same microwave. I am very upset with Sears as well as Whirlpool. Even if I used this machine everyday, it should not break in 2.5 years. Shame on both Whirlpool and Sears. I will never purchase another Whirlpool product again. I will be telling everyone I know.

I purchased a Whirlpool High Efficiency washer and dryer (Model WED4900XWO) from Lowes in March 2013. This washer has performed miserably. I dread each day when I have to use it. The groaning sound is annoying. My husband and I try to leave the house when the washer is being used. We have tried all cycles and combinations of cleaning detergents to get clothes to come out clean. On a regular basis white clothes will come out with spots or discolored to the point the clothes have to be thrown in trash. This is the worst washing machine I have ever used. I will never buy another Whirlpool product.

My husband AND I purchased our Whirlpool Cabrio washer and dryer from Lowes in 2011 (Model # WTW7800XW2). About 10 months after I purchased this I noticed a hairline crack on the right side of the frame that holds the glass top near the hinge. I didnt think to much of this. I figured it may have been screwed to tight when manufactured. A few days ago I noticed the lid wasnt sitting flat and saw the crack had gotten much worse. The Cabrio lid is made with a heavy piece of glass inside a plastic frame allowing you to see through the top. Its pretty obvious that the plastic frame is not durable enough to hold the heavy piece of glass.I called Lowes and they told me that because I didnt purchase their extended warranty that I should contact Whirlpool. I called Whirlpool and was told it was a cosmetic defect because the washer still works. They also told me my washer is outside of its warranty so they would schedule someone to fix it but I was 100% responsible for the repair costs (which I found out will be $400). Out of curiosity I googled this issue online and found numerous people complaining about this exact same issue. When I told this to the customer service agent at Whirlpool, she said there werent enough people to recall the product. Why should I spend $400 when it was a design flaw that caused this problem? I found out the year after my washer was made, the lid was redesigned with a much sturdier frame, Coincidence? I think not!I havent had any problems thus far with the dryer but with the experience Ive had with this washer will make me never by another Whirlpool product again. I cant believe they wont stand by their product! Obviously they know this has been a major complaint on this model from 2011 because it was changed the following year. I have purchased many Whirlpool appliances over the years but dealing with this issues has been frustrating. Im so disappointed in Whirlpool and their lack of integrity!

I had this washer (WTW7990XGO) 5 years and finally had to replace it. It started with the touchscreen. No matter how often it was calibrated it was very frustrating to get it to respond. It would start dinging and going thru all the cycles at random times. Then there was the error code for the door lock. The door lock wasnt the problem, the surround was slightly warped and the door wasnt catching. Warped Im sure from having to literally climb into the machine to retrieve the clothes! Then a few months later it was another error code - the machine wasnt draining fast enough. It didnt drain at all. We had to use a water hose to drain it. After the second time with that, I went and bought a new washer - different brand, dials - no touch screen, and it has an agitator. Unfortunately, I ran into other customers in the appliance department who were having the same issues from 2 other brands of electronic washers. We all went back to as old school as was available.

My father and I both got the Whirlpool Gold gas furnace 3 seasons ago. I can't tell you how happy we both are! Our heating bills plummeted; the unit is quiet and does a fantastic job. I am 50 and I have to admit this is in the top 5 of the best purchases I ever made. For me to take the time to find a place to write a review 3 years later should be testament to how happy I am. Make sure you have it professionally installed! Don't skimp here…this is the key!

I like the washer for the most part. The thing I dont like is that even though I always keep the door open after doing a load of wash, the gasket continues to grow mold requiring me to do a monthly bleach/sanitizing process which is different than doing a bleach load of wash. The gasket also needs to be cleaned frequently. This is in a front loader.

The machine purchased in 2011, 3 years old, will cost as much to repair as to buy a new one. I got exactly no satisfaction from Whirlpool. They said there is no recall so they wouldnt assist. There are only 2 people in my house, so how could the washer be so junky. What would a large family do? I have spent $140 and wont spend another dime on a Whirlpool appliance.

I had one of the first Maytag Neptunes. Loved it to pieces but finally had a problem and my beloved repair guy said it was almost 20 years old so to give up and move on. Obviously, cant be without a washer for very long so grabbed this Whirlpool Cabrio Platinum Washer. One of the biggest disappointments ever! Clothes come out streaked and splotched, dont smell very fresh or clean even straight after having been washed, stains dont come out even with pre-treating, have to run everything on heavy duty, whites are getting grayer by the week, and all-around horrid performance.Im ready to give up my Starbucks, start packing my lunches for a couple months, skip whatever treats I have to in order to get back to a quality machine that can actually WASH CLOTHES. I wondered exactly what it was or wasnt doing so I stood over it for half an hour. Initially, it loads up about a gallon of water and then spits it out over the rotating drum of clothes. Then it stops and spins that water out. I suspect the design logic was that it would force that gallon of water thru the clothes taking some dirt out with it. It repeats that stupid process several times. Then it finally gets a few inches of water in the bottom and the vestigial agitator tries to move it around.I watched one hand towel lie on top like a dead weasel, never getting pulled down or pushed out or whatever it was supposed to do to get down among the other items and squish together. Life throws me everything from sick kids spewing body fluids to people coming home reeking of hydraulic and other industrial fluids. When I say clean I mean CLEAN. This piece of junk couldnt satisfactorily process half a dozen dust rags. Neptune, Im coming back with my hat in my hand and a whole new appreciation!

Had to return my first 2019 purchase due to refrigerator freezing food and imbalanced top doors. I was unable to get straight answers from Whirlpool and so the mgr at BB gave exchange same problems except door not as off. Cheap product make/model. A class action lawsuit from 2016 has occurred and the company continues to distribute the same issues in their new make/model.

I like the top and the stainless steel finish - its electric and so the inside is a pain to clean. Flat top - burners heat well/oven gets up to temp fast. Cleaning the outside isnt difficult, I use Bar Keepers Friend on the SS and Wegmans on the flat top - for the back black splash Mrs. Meyers - so its 3 products but its also 3 minutes. I live alone and so use is minimal as well. Im not sure Id like it in a busy house with kids.

Whirlpool Range Model XFE381LVS - 12/13/2014 4:30PM Wife was cooking dinner and turned oven on. Smoke started coming out of the back and called me. I ran to the breaker panel and turned off the breaker. Back to the stove, pulled it out and smoke still coming out in back at the top. I could see fire in the top of the back panel. Slowly the fire went out. Unplugged the stove, I removed the back panel, wires were still smoldering and the Control panel was burned thru. Took pictures so I could contact Whirlpool Monday. The Electrical control panel is destroyed as well as many wires. Glad we were home and oven was not left on while we were out in the yard or Home could have been destroyed. Purchased the stove from Lowes 11/02/2010 with a extended warranty. Tried to add receipt but would not accept, wrong type doc.

Do not ever buy a Whirlpool refrigerator. Sloppy construction, bins dont close, doors dont seal well and a brand new fridge doesnt cool to a safe food zone. When we call for service, I got the run around for almost 2 hours. They wont be sending anyone to service a brand new unit for an entire week... And thats 2 days before Thanksgiving! I have never had an appliance made this poorly. We dont have the space for a bigger unit, so thats why we bought this model. Size shouldnt impact quality!

I purchased a Whirlpool Gas Range from hhgregg July, 2013 and the oven was non-operational within 4 months. Since then Ive had 4 repairs on this lemon of an oven. I purchased the extended warranty plan through Assurant and, fortunately, have not had to pay a dime for these repairs, but I should not need to keep repairing the same parts continuously. Either the replacement parts are bad or the service technician is terrible and doesnt know what hes doing or Whirlpool makes such poor products that they are not meant to last. There is NO lemon law for appliances and the decision to replace appliances is the decision of the Assurant Warranty Co & they won t replace it and even if they did it would be with a used refurbished gas range. Why would I want someone elses refurbished piece of junk when I already have a repaired piece of junk?!

It is a double oven. Temp varies too much. The oven is very inconsistent. Cooking Thanksgiving the temperature would not stay even. It took much longer than intended. It was quite frustrating. I would not recommend the Whirlpool double oven.

My brand new top-loading, high efficiency washer has squealed like a banshee from day one. Whirlpool replaced the main agitator part, with no success. It still squeals so loud, you cant have a conversation in the same room. Now, Whirlpool says that it is normal. No, it is not normal for a washer to squeal so loud. I am still waiting on Whirlpool to replace the same part they replaced the last time. We are still not abe to hear each other over the squeal of our new Whirlpool washer. This is not normal.

I bought this washing machine in May 5, 2012 and delivered in July from Paddys Market. We do not use the machine that much because me and my wife and two kids living in the house. Yesterday I put my clothes in the machine and left it to wash it. When I went to get my clothes, water was all over the place in the basement and the machine was beeping and reading code LF. I turn off the machine and turned on back. Water started to fill and then suddenly water started to coming from the bottom of the machine. I removed the bottom panel and I could see the water was coming very fast from the bottom of the basket (the drum shape). I called the private company to repair it and waiting to find out.

We purchased a higher end cabrio model only 3 years ago. Last year, on about every 5th cycle, the load would not spin at the end. Id have to remove all the wet clothes, set it to drain and spin, start it and wait for it to hopefully kick in. When I do it right, it kicks into the spin mode. I had to quickly press start/stop to unlock the hatch and reload the soaking wet clothes and wait for it to spin properly. Yesterday the same thing happened again. This time, it did not kick in. I ended up flipping the washer over and taking a look underneath. I discovered that the motor was seized. It had lost all its lubricating oil and smoked the belt. Now, my 3 year old washer is sitting in the driveway awaiting a trip to the dump since I got fed up and went out and purchased a new Samsung top loader. I emailed and called whirlpool with no luck. Not impressed. When I went out to buy a washer today the first thing I told the salesman was to stick anything with the name whirlpool out in the trash bin out back.

I am very reluctant with online product feedbacks. But here is one story that needs to be told. I purchased a Whirlpool 3D Split AC 2 years back (and hence the product is out of warranty). The product quality is so bad (and unreliable) that within 2 years the coils in the Outdoor Unit have started to leak. When I requested for service visit the technician (so called) came over and did a wet service and took the fee (without an invoice). And assured that the AC would start to work fine. Within a week we realized that the AC is not cooling enough. Again a service visit was called and this time the technician (supposedly) diagnosed the above problem. The repair cost told to me is to the tune of Rs 10,000/- for a product cost of Rs 36,000/- (or so) bought just 2 years back. Does anyone in Whirlpool understand what QUALITY means??? Does anyone understand VALUE FOR MONEY... This aside I have a 2 Tonne Whirlpool AC, 350 l Whirlpool DD refrigerator and a Washing Machine... I think its time for Move over WHIRLPOOL and HELLO MITSUBISHI, BOSCH, HITACHI... End of a great consumer brand...

We bought our Cabrio set 2 yrs ago. They have worked fine, until about 4 weeks ago when we begun getting what looks like bleach stains on our dark and colored clothes. I blamed my wife for using bleach or splashing it accidentally. So today it happened again, and no bleach was used or even open near the machine. This was the third load today and the first one was towels, no damage, 2nd load whites and light underwear with some spotting, third load pair of pants and pair of shorts ruined. What is happening?

I purchased a Whirlpool Refrigerator Model # WRF990SLAM00 in May of 2013. My wife started noticing ice build up on the ice maker in the refrigerator section of this French Door model. We had it serviced for the same problem 4 times and the problem still existed. At this point, Whirlpool offer to give us our money back, and here is where things got interesting. My wife spoke with a Sheila who was to issue a check to a third party company who would then pick up the refrigerator and give us the check. Sounds simple enough, huh? The company was to get the check in 7-10 business days so we bought a new refrigerator, a Samsung this time, and scheduled its delivery for the time frame we were told the non-functioning fridge would be picked up. My wife could not get in touch with Sheila, which was always a problem, and we talked to a Beth who told us that this whole process had not even been started yet. Well, we are having our new fridge delivered and still waiting on our check and for someone to come and pick up this American-made piece of crap! We wanted to buy American, but this is what we got, a piece of crap!!

I bought Whirlpool hot water heater with the Honeywell part in 2014 and the thermal box went out. No flashing lights, no way to reset. I understand that Whirlpool had a class action lawsuit after researching. Still selling this product to consumers. Whirlpool should be held responsible, and be made to give an allotment to replace homeowners with hot water tank of choice! If lawsuit is active please add my name.

Purchased this oven in September 2012. Three months in, we tried to use the self-cleaning feature and blew a thermal link (guessing terminology). Tech came out and got the oven open and that was his determination. Also said he would replace both the front and the rear one because it was pretty common that if one was bad the other would probably follow. Said hed have it within a because he had to order it from the factory. I called a week later because no revisit had been scheduled and found out that the factory also did not have the part and was sending me a new unit. Whirlpool was supposed to call and tell me that and did not. It would be another week. Then a few more days for them to come out and replace it and pick up the original unit.Now I have brand new unit again so we tried the self-cleaner. Same issue. To make a long story short I called again this morning and scheduled yet another service call because the oven is inoperable again after running the self-cleaner. This is the 4th time with the replacement oven. They have replaced the thermal units several times and have replaced the fan.Fortunately, when I complained vehemently about the original unit, Whirlpool gave me a one year extended warranty on the replacement so I am still under warranty, which, if youre dumb enough to buy a Whirlpool after reading this, I would advise paying for. If you already have one and are having similar issues, call Whirlpool and insist they give you one for free because they sell junk.This time I told the nice customer service lady that, since the holidays are over and I can get by without the oven, I am going to run the self-clean right after the tech leaves. When it blows and gets repaired again I am going to repeat the process until they refund my money or send me something that works. Whirlpool apparently doesnt care because in their agreement with their service companies they only have to pay for the first visit. After that they just supply parts. I will keep doing this until I run out of service companies in Denver. Then I am going to pay for another extended warranty when this one ends in September 2014 and continue the process.Wake up Whirlpool!! If these units fail consistently at high altitudes (which every tech that has come out here has mentioned as an issue) then fix the problem or quit selling it in these areas.

We purchased a Whirlpool refrigerator from Conns Appliances on 2/2/12. It worked fine until about 2 months ago. Then it started freezing food in the refrigerator. We called Conns, and they sent a technician to replace the thermostat. A couple of days later, it was still freezing food. So we called Conns again. They sent a second technician. He called Whirlpool tech support, and they told him to adjust the position of the thermostat sensor. A couple of more days went by, and food was still freezing. The problem had gotten even worse.I called the manager at Conns and suggested that we should consider replacement since the previous 2 technicians were unable to solve the problem. He sent a third technician. Tech #3 called Whirlpool tech support and re-adjusted the sensor. He said there wasnt a lot they could do and that if I wanted to get it replaced, I would need to call Whirlpool.I called Whirlpool Customer Service and explained everything that had happened. They told me they would need to send another technician. I asked why, since 3 technicians had already looked at it. She said there were different levels of service and they would have to send someone from their authorized service company, as if Conns is not authorized. I asked if this problem was common in this model of refrigerator. She said she could research that if I could hold, so I said ok. After being on hold for several minutes, she came back and said she couldnt find any record of this being a repetitive problem.I didnt have a thermometer, and I thought if I had more concrete evidence of the problem, then maybe they would replace the refrigerator. So I put a glass of water in the middle of the top shelf. Within 24 hours, it was frozen solid as an ice cube!Technician #4 came and called Whirlpool tech support. This time, they told him that this had been a problem ever since this model came out and they had a fix that had been on the books since day 1. So the customer service lady obviously lied to me. Technician #4 stuffed a piece of Styrofoam in the hole where the air comes from the freezer into the refrigerator and he re-adjusted the thermostat sensor. I asked if we could just replace the unit and be done with it, but he said we had to wait and see if his fix worked.I went to Ace Hardware and bought a refrigerator thermometer. Two days later, we had frozen strawberries, frozen lettuce, frozen milk, and even the meat and cheese were freezing. My thermometer said temperature was 32 degrees. I called Whirlpool back and insisted that they replace the refrigerator. They told me The unit was not authorized for replacement and they needed a 2nd opinion. I was very angry. I told them there had already been 4 opinions and a 5th wasnt necessary. I wasnt getting anywhere, so I asked for a supervisor. They transferred me to someone named Sue. Sue told me the same thing - not authorized, need a 2nd opinion. I told her that I work at The Mens Wearhouse and that if a customer spent that much money on a suit and had trouble with it, they certainly would not have to bring it back 5 times to have it re-tailored. I asked to speak to her supervisor. She said, Sir, my supervisor doesnt speak to consumers. I could not believe my ears. Where would they be without consumers? I was so mad I hung up on her.Later, I realized I had no options and called to request the 2nd opinion. I was told that the technician could authorize the unit for replacement. They also told me I couldnt get a technician for a week because their technicians were all booked up repairing their faulty products. I had no choice but to wait. I moved my thermometer to the bottom of the refrigerator to see if the temperature was the same there as on the top. The temperature there fluctuated between 28 and 34 degrees. I called Conns to tell them the story, thinking maybe they would go to bat for one of their customers. They told me this should never have happened and that the matter should be escalated to their home office and that a manager would contact me within 30 minutes. He never called.Two days after that phone call, I went to Conns to speak to the manager. I told him the whole story and told him that if Whirlpool would not replace the refrigerator, then I would have no choice but to contact Discover (my payment method for the original purchase) and dispute the charges. I pointed out that even though it should be Whirlpool paying for it, his store would take the hit if Discover reversed the charges. He called someone and told me a Conns service manager would contact me within 48 hours.More waiting. Technician #5 came. I told him he was to authorize the unit for replacement. He said he couldnt do that and that Whirlpool tells all their customers that just to get them off the phone. He re-adjusted the temperature sensor and left. I was livid. Now the problem went the other way. The temperature wouldnt go below 50 degrees. We filled an ice chest with food and ice and began living out of it. The Conns service manager called and said he would have to send a technician. This would be #6. I was very angry with the service manager and called Discover to dispute the charges. Discover opened an investigation, sent a letter to Conns (and maybe Whirlpool, Im not sure) and issued a credit to my credit card account.#6 came and re-adjusted the thermostat sensor. The next morning, he called to see how it was doing. The temperature was still around 50 degrees. He wanted to come and adjust it again. I told him to get the unit replaced! So he submitted paperwork to request a replacement. He called back and said that he felt sorry for us because he knew we had a 3-month-old baby in the house. Since the replacement had been requested, Conns wouldnt pay him to come again; but he said he would come on his own time, on his lunch break, and readjust the sensor in hopes that it would get us by while we waited for a replacement. He said it might take 3-4 days to get the replacement. I told him he could come, so this was technical visit #7. He adjusted the sensor. The next day, the temperature was still 50 degrees.I called the service manager at Conns to confirm that they had requested the replacement. He said the paperwork was submitted, that the home office would review it, make a decision, and that we should know something in a couple of days. That was on Wednesday. On Monday afternoon, I called him again. He said the paperwork wasnt submitted to home office until Saturday and that he was expecting to hear from them by end of day Tuesday. In the meantime, we were still living out of an ice chest.I had already determined that Whirlpool wasnt going to help me, and now, Conns was giving me the runaround. That afternoon, I was working on a project at work with a lady who was fairly new in our company. Turns out she used to work at the Conns home office and she knew people in high places there. She called a VP on my behalf. The next morning, I got a call from the VP telling me that I could get a replacement. I dont think I would have gotten my replacement if I hadnt bumped into the lady who used to work at Conns.I called Conns store, and they said a credit had been issued and I could come to the store and pick out whatever I wanted up to the amount of the credit. I knew I didnt want another Whirlpool. The selection was very limited, but I found a Frigidaire that I thought might work. Then they told me I would have to pay extra for an ice maker, even though I had bought the ice maker for the Whirlpool that was being replaced. I argued with the manager until finally he agreed to give me the ice maker, delivery, and installation.Yesterday, Conns called to tell me they were coming in the afternoon to install the refrigerator. They had the audacity to ask me what was the matter with the unit they were replacing! They did come and replace the unit. But wait...Thats not all! This morning, the ice maker had not made any ice, even after running all night long. Conns sent a technician today, and he said all of the parts were not installed and it was preventing proper water flow. He is coming back on Tuesday to install the missing parts. So we still arent done. I dont know if Im more angry with Whirlpool or with Conns. Whirlpool did not honor their warranty and Conns got stuck with it. But then Conns provided poor service too. I got stuck in the middle, and it still isnt fully resolved.

I bought my Cabrio washer 16 months ago to service a family of 4 adults, 2 children and 2 dogs. Anything that has the slightest stain has to be pre-rinsed or pre-washed in the sink before going into the washer. Every load is an unbalanced load. Although the floor is perfectly level, the washer bucks and dances as though it is possessed. I never expected a $900 washer to be a piece of junk. I would love to be part of a class action lawsuit regarding this washer.

I shouldve read the reviews online about Whirlpool before buying our washer and dryer Duet. 4 years later the main bearing is going out and its 1200 to fix it. No support from them or anything. They did offer a loyalty discount on a new washer... No thanks. Just would be another headache a few years down the road Im sure. Goodbye Whirlpool. Never buying anything from them or their other brands. Ill definitely spread the word too.

We purchased the microwave. It looked nice and seemed sturdy. I bought a trim kit to make it look Built in. As soon as I finished installing the microwave and kit we tried to use it. My wife could not get the door to open unless she pushed the door button hard several times. I checked to see if the trim kit was causing the problem and it was not. We kept trying to get the door to open as it should but could not make it work correctly. I even used a little lubricant and it did not help. We then looked up the reviews and saw this was a prevalent problem. We then returned the unit and trim and ordered a Samsung. It will be in on the 25th of March. I placed a review on Lowes site but Whirlpool removed it saying since I took it back they removed the negative review. Since it was defective I wanted the public to see the truth on this unit.

Purchased the oven in summer 2015. Very disappointed in the AquaLift Self-Cleaning oven. Absolutely useless. Does absolutely nothing and I end up cleaning the oven by hand. As a senior citizen, this is uncomfortable; I have injured my leg in the process and now feel I must wipe the oven down after each use. I was so looking forward to having a nice clean oven at all times and its not happening. This is of no value to me.

After 14 years of good service with Whirlpool Duet front load washer dryer set, wife chose Whirlpool kitchen appliances as part of a kitchen update project. All matching fridge, range, microwave hood and dishwasher. What a nightmare! The icemaker growls and whines all the time and the dishwasher was broken before being packaged at the manufacturer. A wheel from the middle rack was missing when the dishwasher was opened. It wasnt in the sealed dishwasher nor in the box. So it had to have been broken off before the item was boxed. We called for warranty claim and A-1 Appliance was recommended out of Shreveport, LA. In a few weeks he showed up, looked at the rack for a while and said Ill have to order a new part. I said fine. (How hard can that be? Right?) So here we are 5 months later, unable to use the middle rack because it cant hold any weight with the roller missing. Multiple calls to Whirlpool and A1 and we keep getting promises and runarounds that turn out to be lies. How hard is it to say go to your local Lowes and well authorize them to give to give you a rack from an in-stock dishwasher? Let Lowes wait on the new part! Sounds simple, and any other company would have done that, or told us to return it to Lowes for another one. But NO! Whirlpool just whines about being behind on parts, shorthanded, or lies about the part is in and its A1s problem now.So, today, same story. A1 says they need 2 parts. **! Its one part. Whirlpool says A1 has the needed part. Same old runaround. So, we just replaced our 14 year old washer and dryer with NON Whirlpool units. $2500 more in of appliances that Whirlpool could have gotten, but Im guessing they dont even care about missing and losing sells. They certainly do not care about warranty, parts, quality, customer satisfaction or repeat customers. Never again with Whirlpool! Beware!

I just want to say that this washer is indeed a colossal waste of money. I bought an HE machine thinking Id be environmentally responsible, but the amount of times I have to re-rinse clothes negates that. Whats worse is that clothes come out dirtier than when they go in. Thats right--just put a brand new set of sheets in the washer and when they came out, there were dissolved detergent marks and gray, linty patches all over them (this using warm water and a soft gel detergent)--resembling dirt you might get from hanging clothes on a mildew clothes line. I cant tell you how many times I need to re-run the drain and spin cycle. This wastes time, water and quality of life. Id try to re-sell it on Craigslist but wouldnt want to subject anyone else to it--not fair even at $100!Updated on 02/23/2015I wrote a review in September 2014 on the Whirlpool cabrio model WTW5600XWO. To update the community on my recent customer service experience with Whirlpool: I wrote them a letter a few weeks ago stating that I dont expect them to follow up but wanted to let them know I would be buying Bosh products from now on and reiterating my anger at needing to miracle brush any dark piece of clothing after it goes through the cabrio. My letter specifically said I did not expect customer resolution but wanted to express what a rotten product they produced and marketed. They called back leaving a message to the effect: We apologize want to help you but need to speak in person. Please call [toll free number] and have your make and serial numbers available. I called back, and after waiting on hold for 10 mins., the rep took my model and serial numbers, said, Oh I see your letter. Please give me a moment to review it. Then I was told there was nothing she could do. I do apologize for your frustration. I couldnt BELIEVE they would bother contacting me only to make me go through that charade-- They are PATHETIC! I say boycott the company! Well, I certainly will.

The first washing machine I bought was a Cabrio. Started having problems right off. After the repair people had been there several times we finally got Whirlpool to replace the machine. We got another washing machine. We bought two warranties because it kept tearing up. Repair people said this time it would take $1500 to fix it so of course AIG said, We will not pay this much. So I have a washing machine I have spent $1600 on and it leaves, greasy spots all over my clothes. So fed up with Whirlpools trash!!

Bought new. About 3 years old. Been repaired 2 times. Will run about 10 minutes, drain, and stop. Does not clean dishes. Model #du1015 xt xs2 Whirlpool Quiet Partner 1. Never will buy Whirlpool again.

The buttons that turns on the burners and oven turn on with a very light touch and start leaking gas and sometimes light. Its very dangerous and has done this since We got it new from Lowes. I wonder if there was a recall on this model or if lots of other customers have had the same trouble. Model #WFG524SLAS O Ser. # R20910336 We have had this stove about two years and My wife has kept after Me to report it , but I never realized how dangerous it really was until now. The previous stove We had you had to push in on the buttons and then turn them before they would light. Thank You.

Our Model # WRF532SMBW refrigerator was purchased on 8/21/14. In the last several months, it has begun having problems with ice build up in the bottom of the freezer, as well as water puddling around the front legs on the floor. I called Whirlpool and they suggested it was our water line, but it does not leak onto the floor daily. They then suggested I have a serviceman come out for a $120.00 service call, plus whatever other expenses that occur. Or, I could just pay $322.00 and that would take care of the service call, parts and an additional one year warranty. We just bought this refrigerator 23 months ago and it cost $1618.92. Now I need to spend $322.00 additionally! What a rip off. Do not purchase a Whirlpool Refrigerator or any of their other appliances. I see this is a common complaint and wish I had read the reviews earlier. The appliance is only 2 years old.

When we remodeled our kitchen after checking a lot of brands of oven we decided to buy the Whirlpool Self Cleaning stove/oven. Loved the look of it. When trying to clean the oven I followed the directions just as its said in the manual. After the cleaning was complete it didnt even look like it clean the oven. I called customer service and they told me I had to clean the oven with a little elbow grease before I put the self cleaning on? Really? I have to clean the self cleaning oven by hand beforehand? Why did I purchase a self cleaning oven then? And because it was just 2 weeks out of warranty they would not help at the 800 number. NEVER NEVER again will I ever purchase Whirlpool! How they treat their customers is disgusting!

We have been very satisfied with the way our dishwasher has performed over the years. It cleans the dishes well. It runs somewhat quietly. It doesnt seem to use too much detergent to get the dishes clean.

I like the experience of the microwave. Especially because it’s mounted in the wall and easily accessible. User-friendly, easy to use, and pretty self-explanatory. It’s very easy to clean which is something my wife really loves knowing we both are working professionals.

Water pools at bottom of freezer and onto floor. Has been repaired twice, but still leaks.

Bought this washer in 2013 for close to $800. About a year and half old it got real loud sounds like a freight train. Asked whirlpool repairman about it, and was told it is a main bearing going out. He said it would cost over $500 to fix it. Whirlpool warranty sucks - only one year. Called whirlpool, told them the problem and asked if this is a problem with this washer. Got told no they have no problems with it. Found out later not only do they have this problem with it they change design because of it. Repairman said his own daughter had same problem and he had many service calls on this model all with same problem. WHIRLPOOL WILL NOT REPAIR OR REPLACE PRODUCT WHICH IS A MANUFACTURE DEFAULT. It sets in our house unusable. I will never buy a whirlpool product again. Sad because that use to be all I would buy.

We purchased the Top Loader Cabrio in 2006 for $1100. About 1 yr. later it just stopped, but was covered under a recall. A year later it stopped working again and cost $400 plus we bought a 3 yr. service contract for $350. A few months after the service contract ended, the spin cycle got very loud and it started leaking grease and water. It now need a ball bearing and $600 of work. So now we spent almost $2000 for this washer in 8 yrs. Our Maytag was $400 and lasted 15 yrs and we gave it to someone else who is still using it and we never had it repaired. It sounds like Cabrio customers have been complaining about the same issues for several years but they keep recurring and Whirlpool is doing nothing to correct them. We are not putting more money into it after reading all the complaints. We are buying another washer and another reliable brand. I would have been a customer for life because I did like the way it worked and cleaned, although I hear so many people had problems with that so I am not waiting for that to fail too. And I recommended the Cabrio to several people who bought them and now I hear they are starting to have problems. You should stand behind your product and correct these problems and recall or fix them at a reasonable cost.

My mother-in-law purchased a Whirlpool refrigerator in 7/2010. It broke down the first time in August then consistently after that. We have had repair people out multiple times and the issue continues. I called Whirlpool and they said since it was purchased more than a year ago, it is not their problem. You would think that in all that time they would have found a way to repair or replace it. To make matters worse, we have had to call hospice in to care for my mother-in-law, all she wants is to get ice and water out of the door.

I purchased a new Whirlpool washer and dryer (model number WED9250WR0 #WFW9250WR00). The washer broke after about 2 months. They took my washer and gave me some off brand one, because I purchased a 5 year extended warranty. They kept my washer for over 3 months, saying that the manufacturer takes that long to get the parts in. Its ridiculous! The tub, seal, and some other parts had to be replaced. It was shredding my clothing and my bedding. The first time they fixed it, a couple days later, it started making a horrible noise. The repairman came out, and a part had fallen off inside, so he put it back on. It kept happening, so I called them back, and he taped the part on!About 2 months later, the seal started shredding, and so did my clothing. I called again, and they had to replace the seal again. It still sounds off balance, and they said that was normal, because of the give in the floor. The day they fixed the seal, I washed a childs sleeping bag, and it shredded it too! I called again, and they refused to replace it, and they want to come and look at it again. My dryer lint trap seal also keeps coming apart, and I have gone through 3 of those in less than 8 months. They said they are just made poorly, so it will keep happening. I just want my money back, and buy a different washer and dryer somewhere else. I had an old pair that I bought, used, and they lasted me 5 years with less problems than these that I paid two grand for.

We bought the Whirlpool water heater and not long after, it quit heating. After many phone calls, we finally got a response and were told to get the replacement thermocouple. We did this and it was the wrong part. We found out that we had to have a right hand thread thermocouple. Now, the heater is out of warranty and we cannot keep it lit at all. It takes at least 3-4 times before it will light once and then it goes out every time the hot water is used.

Bought a Whirlpool Gold model GI6SARXXF04 less than two years ago and have already had three problems. The first was a faulty main water inlet hose that dumped water all over the kitchen floor. It was still under warranty so I didnt have to pay for it. Now have two additional problems. About two months ago there was a puddle of water under the refrigerator every few days. I finally figured out it was ice build up in the bottom freezer chest that melted that caused the water leak. The second issue is that the ice maker just stopped working. It had been working great this whole time and then suddenly it just stopped making ice. I contacted Whirlpool and they will cover the repair for the defrost issue but not for the ice maker. Gee, thanks, way to backup your product. Im guessing the reason they dont backup the ice maker is that its probably the more expensive repair. Like many people here I also will never buy another Whirlpool product again, regardless of what it is. Theyve shown me that not only do they produce inferior products, they also arent interested in customer satisfaction.

I bought a Whirlpool washer in Aug. 2015. At the end of September I had to call and get a repair man to come out twice because my clothes got stuck way down under the agitator. Not only that, but it does not clean my clothes well at all. I am really dissatisfied with this washer!!

They have sent three specialists to look and assess the Whirlpool washer and dryer that I have. Both stated that the washer does not function correctly; the last repair man stated that he had seen many like this and they have a history of unreliability. I would like my money back, not a repair, as they do not even use just cold, but a mixture of both hot and cold. I had bought them specifically because I thought they only used cold, which was stated by Whirlpool. This is wrong advertising. I would like my money back. I still have the receipt and I am seriously unhappy with the washer and dryer, period.Since I cannot use the machine, which I had bought for $1600.00, the washer and dryer is now sitting in my basement. While whirlpool is saying that they wont take back the washer and dryer even thought it has a warranty. I had paid it in cash and I do not see why I should be forced to keep a broken washer and dryer set. I will contact my lawyer to consult this issue with Whirlpool.

I purchased this washers predecessor, the WTW6200 in May of 09, along with the matching dryer. The bearings gave out after 36 months of use, and our household comprises two adults in their mid-fifties. Estimated cost of the repair? $650! Why am I posting this here? Because two weeks ago, my daughter-in-law called to say that shed so liked my machine when she visited in 09 - Id had the thing for two weeks at that time - that shed bought the WTW8500B and... the bearings were already giving out. I suggested she get the thing repaired, sell it immediately and replace it with an LG product, which is what Ive done.She has been put on a three-month waiting list for the repair, confirming my feeling that Whirlpool, as a whole, has gone down the tubes. Their service record is dreadful, with an excess of 20K complaints existing at various consumer agencies regarding ALL the Cabrio line, and their warranty, Ive learned, is considered the worst in the industry. All in all, the single worst purchase of my fifty-odd years.

This diswasher is streamlined and elegantly desiged for any kitchen. It stays externally clean with easy to wipe surfaces. Easy to use controls on the top of the door that cannot be accidentally hit when walking by the item. Plenty of internal space for lots of dishes. Internal silverware rack is easily removalble and not in the way of dishes. It is extremely quiet when running, like a soft hum in the air. A real "bang for your buck".

Buy a new in a box dishwasher, it is not working, not a good customer services, I wait 1 week for a tech to come and fixed, and I will wait to tech to come back with parts to be fix. Company not replace the unit, I pay for something that is not working. Very frustrated for the time waste. 3 day off from work.

First F1 symbol on washer took 6 months to resolve. All we needed was new motherboard and couldnt mail it to us even though we could replace. It had to be an authorized person. Well we had one and they never put him in the system. Finally got that taken care of, 6 months of having to press pause and restart 5 times just to do one load. Arrrrrggggghhhh! Now water leaking out the bottom. Called again, on hold, then on hold again to be transferred to tech support. Yeah, right. No tech support. Talked to management, they could care less about us even though we have other products from them. Dont buy, they are lemons. We had ropes for 15 years and lasted through everything. Thanks Whirlpool, heres to losing a customer!!!!

The door broke down twice and taking months to repair. We bought the model WMH53520cb in 2017 April and since then we had issues with the door. Even the door is closed the microwave doesn’t turn on. The latest issue happened on Jan 2018 and still not been repaired. Seems like they are waiting for my one year warranty to expire.

Bought a nice house in 2012 which has a Quiet Partner 3 Dishwasher. About twice a week it has to be reset pressing buttons because it blinks at you when you press start. Control board was replaced a couple times since we bought house. We just put up with it. The tub has a manufacturers defect in bottom where the plastic is so thin it finally cracked and over time water trickling out went to wall. Then ruined an area in finished basement ceiling. Ive used a couple different things to stop the leak but it always starts leaking. Customer service says its not under warranty so will buy a new dishwasher. But not Whirlpool or Maytag. Same company now. Dishwasher is a total piece of crap.

Bought the washer from HH Gregg for over $560 12/2012. Turned on power 4/2014 and just heard clicking noises then nothing. Had to get technician. Paid for $75 service charge and waiting for cost of labor and part for the lid lock/latch assembly. I see a lot of complaints with this new machine. I bought a new one BECAUSE I did not want any problems with repairs. Whirlpool is ripping off the consumer passing out this piece of discombobulated metal, wires and electronics. An appliance like this should last AT LEAST 7 years without a problem. I wish there was a class action lawsuit and will be waiting to the day it surely comes.

Subject was included in our new condo less than 5 years ago. It appears that all we have to do is look at it and it falls apart. There is constantly another piece of plastic on the counter. Our experience in calling Whirlpool for service is that it is very expensive and time consuming. A refrigerator installed at the same time as the purchase had a defective ice maker which took three service calls and a final installation of a broken part by me before we were together again. 2 (two) service men recommended that if we had problems again that we do what they did. Buy Ice Cube trays!!!! What a great recommendation.

I purchased a Duet several years ago and did not have a clue as to the problems everyone was having. Over the course of ownership I called the city to determine if we had a sewer leak. I had a plumber inspect our pipes. I felt really stupid that it took me this long to figure out it was the washer. I knew it smelled like mildew and have been using vinegar, afresh, Clorox until I am blue in the face. I didnt figure out that the sewers smell was also the same as the washers until I got on line and read about these machines. Finally, I lifted up the gasket around the door and it was completely black with mold. No amount of afresh was going to fix this problem. Do not purchase these front loaders. Feel like they should have been recalled and I really dont understand why they are still in circulation. I have also been having health/breathing issues and I cant help but think the mold is causing my illness.

I do not know if my mail would be read or not, but I am writing it just to my satisfaction. I am a doctor (dentist) living in Haridwar. I had bought a Whirlpool fridge around 2-3 years back. I am not sure about the date. I have the bill. I will have to check the exact date. So around 3 months back, the fridge stopped cooling and I lodged a complaint in your customer care center. The engineer turned up, and he said that the compressor was not working and the company will change it. We only have to pay for the gas to be refilled. I said ok. Everything went well for nearly 3 months, then again one fine day, the cooling stopped. I called the companys customer care, and they gave me a complaint number and customer satisfaction number. But nobody turned up for 2 days. I called and called, then after much calling, a guy from the company came and said that the compressor was not working and they have to change it but that it will not be possible for 4 days. After 4 days, he will come.Sir, can you live without a fridge for 4 days and not getting the guarantee that it will be ok in the next 4 days? So, I went to the market bought a Kirloskar compressor, got it fixed, and got the gas filled; and the fridge is working fine now on the same day. This cost me nearly 4500rs, but I am happy that I have solved the problem. Till date, nobody has come to see my problem; and to my utter surprise, I received an SMS from Whirlpool that the customer is not willing to pay. Ha ha ha. My fridge is a double-door 280-liter fridge. What should I do?

I placed a service call for a high pitch sound that emanates from our new Whirlpool refrigerator MD#WRF990SALM00. It is hardly perceptible although hurts my wife and Is ears. The technician was courteous and efficient although said that the sound was typical of this model. He did find another issue with condensation forming at the top and returned with the repair part in a timely manner. I placed another call to Whirlpool whom suggested that I order a different authorized service company to investigate although if the results of the call was that it is a typical sound of this model that there would be a service call charge. I will most likely order this service call in the future although I will wait to see if there are any similar issues that arise. If you experience the same problem with your Whirlpool Appliance please leave your experience. Thank you.

ECO friendly top load Whirlpool washing machine - I bought this machine September 2013. Now it has a continuous clicking sound. It appears to be the lid locking mechanism and the washing machine will not turn on. It is under warranty and I am finding it hard to get a repair service in my area that is directed to Whirlpool to come and fix it. The only appliance repair in our area states that they will charge for trip and service if they find that is not a defect within the Whirlpool perimeters. I could be charged up to $200 for trip and service which is half of what I paid for. Whirlpool states this is not the case, and I am now having to wait a week to even set up yet another appointment. I have other machines that lasted 7-10 years until they wore out. I am frustrated and what could be a simple fix has turned into a financial nightmare.

I have a refrigerator model WRT359SFYM00 that is 4 months old. It suddenly just stopped getting cold. Trying to contact Whirlpool warranty/service department has been a nightmare. Once I did get them they spent almost a week trying to locate someone in my area to service it. I was in constant contact with the phone support person, but they kept telling me its out of my hands a special unit was making calls to find a repair person. After almost a week they informed me they could not find anyone but if I could find someone to service it they would reimburse me (max $250 labor). I spent 5 minutes and 1 phone call and I found someone.They wasted a week bumbling around with wanton disregard for their customer. Their service after the sale is deplorable. They are staffed by people who answer calls but have no ability or authority to fix a problem. Worse yet, they kept telling me it was out of their hands. If not in their hands, then whose? I assure you I will never buy another Whirlpool appliance simply based on this warranty experience. What a horrible way to treat your customers. Shame on Whirlpool!

I had noticed water on the floor and just thought someone left the freezer open. It started happening about every other day. I read online that it was probably from the drain in the bottom on the freezer being clogged or frozen, and I found instructions on how to fix it. After we took the door off, the drawers out, and the back panel off, then we started thawing the drain. Finally, I got it cleared out. Here I am, a month later, there’s water on the floor again.

My husband and I purchased this washer in August of 2011. Within 2 years the lid broke because of it a cheap plastic frame on a heavy glass lid. At that time I researched it and found many people with the same complaint. Whirlpool would not do anything for us but the company that we purchased it from did agree to supply the part if we paid the labor. We did this and replaced the lid. Well here it is just right at 2 years again and the lid is completely broken and the washer is unusable. There is no way to bypass the lid issue which makes the washer completely useless.I called Whirlpool again and was told there was nothing that could be done and that because there was not a recall on the product, they would not be able to do anything for me. We have purchased a new Samsung washer that received excellent reviews from Consumer reports and we will NEVER buy another Whirlpool product again. I cannot believe a company that old and as large as Whirlpool will not stand behind a faulty design and faulty made piece of equipment. It is very disappointing.

I purchased all the appliances for my home from the Sears store in Steamboat Springs, Colorado November 17, 2016. The refrigerator stopped freezing a few days ago. I looked at my manual & there is a 1 year limited warranty. I had a repairman come out & he told me there is a leak in the sealed system for the freezer. He doesnt do that type of work- it is very unusual & requires a special certification. The repair would be 500 - 1000 dollars to fix. He couldnt believe my fridge was less than 2 years of lad & is having this problem. Factory defect.

In 2015 door of top loading washer (Whirlpool Cabrio Washer) needed total replacement. Lucky I had an extended warranty. 2018 March, extended warranty expired and now have the exact same problem. Pretty crummy product if major part like a door has to be replaced every 3-4 years. We do not wash large items like blankets/quilts in this machine. That goes to a laundromat where there are oversized machines or to a dry cleaner. So the only reason for this breakage is a default in the lid assembly. There is only one phone number for customer service, repair, parts etc. Put in my service call and filed a complaint at same time hoping for at least a small discount. Ha! $100 plus tax for service call- part price ranges from $150-230 plus tax. Whirlpool could tell me the part exists but would not say how long it takes to get it! Do NOT buy Whirlpool washer with top load lid that has glass window. Big problem is that Whirlpool now has Jenn-Air, KitchenAid, Maytag and Amana all under their umbrella.

Since May 3, 2016, five servicemen have failed to repair my Whirlpool refrigerator (WRF560SEYM), which is less than 2 yrs old. One trainee from A&E Factory Service had the nerve to reinstall broken parts. I have been completely without refrigeration for the past 48 hrs only to learn that the repairman scheduled for tomorrow has been cancelled because AIG warranty has not approved his visit. Further investigation reveals that the parts were never ordered, pending approval from AIG. Whirlpool cant help me because AIG has not declared the appliance unfixable. Hhgregg cannot help. I have spent countless hours on the phone on hold & wasted hundreds of dollars on spoiled food. Dont trust Whirlpool. Theyre not the company they once were. Their warranties arent worth the paper theyre printed on. Buyer beware!

Whirlpool Gold Convection Oven - I bought this new oven, cleaned it once. The bottom cracked where the spills had been. Since Id had it only two months, repair tried to say it was only cosmetic but had to replace it. Next time I cleaned the oven for multiple spills, (a year later) it cracked again, giving the bottom a shattered look where the spills were. I only cleaned it once and the bottom is ruined. I dont expect Whirlpool to stand behind this, but I agree these Convection Ovens require a Class Action Suit because they are selling faulty merchandise. Period.

We purchased a Duet washer in Feb 2011. On Nov 2011, it started making a very loud noise when it would spin. We contacted the warranty company, not realizing it was still under the manufacturers warranty. The warranty company came out and took a look and claimed it would be about $1500.00 in parts to repair. We contacted whirlpool and they also sent a service person that claimed the same thing. Both service people claimed that the other did something to the machine and it was the others responsibility to fix it. We have contacted whirlpool and the parts have been ordered. We were informed today that they are on backorder and will not be available until some time the middle to the end of January. When asked why they just dont replace the washer, the answer we received was that was not the policy.

Love my Whirlpool stove and I just bought a Whirlpool French door fridge. I also have a Whirlpool washer and dryer and I am very happy with the way they work and look. I replaced my Tappan stove that I had for quite a while and it was a good stove but I am very happy with my Whirlpool stove, it not only works great but it looks great.

The refrigerator has excellent quality, low noise level, clean lines and enough room for produce and frozen foods. Would recommend this to friends. This replaces a Whirlpool refrigerator that was over 30 years old. The original unit still works extremely well and we gave it to a family that needed a refrigerator and they were very happy to receive it. It looked as new as the day I purchased it 30 years ago.

I had this stove for less than 3 months and the glass top broke after turning on the stove. Now I tried to find out how to purchase a replacement but it cost as much as a new stove....Ughhhh this is so aggravating.

I have had my refrigerator for a few years now. When I first purchased it, it was because of the brand and the looks. As far as performance it runs just as good as any other less expensive ones.

I had my Whirlpool Gold refrigerator for two years. I observed water puddling out of the bottom of the freezer about every three days. I called Whirlpool to find out if there was a recall on my problem. There was none although refrigerator repair companies said there should be as Whirlpool has a defective part. That part is the drain for the freezer as it clogs up and does not allow water to drain and then refreezes. When the freezer automatically defrosts, some ice melts and as a result the water comes out of the bottom and puddles on the floor in front of the refrigerator. I recommend that people do not buy Whirlpool refrigerators unless you are willing to pay over $200 to replace the end of the drain line in about two years.

I had the first microwave for 6 years. My husband messed it up so got a new one, same over the stove type. It has lots of programs. Its a rather large microwave, plus it has a steamer which cooks vegetables with steam while I am doing the rest of the meal and whats more important is its quiet. The site is fantastic not just in width but in depth. The best thing about this microwave too is that it has a frozen cycle which does not partially cook the food like most microwaves and the defrost is the same, it does not partially cook it actually defrosts completely without cooking it. This is by far the best microwave I have ever had, and I wouldnt want any other brand. It might cost a little more than the usual brands but its worth it. I also have a mini Whirlpool on my Countertop for my grandchild to use so he keeps away from stovetop at all times.

This Cabrio washing machine is really frustrating....... It goes off balance all the time. It does not matter if you have a full load or partial load, I know it has a tendency to go off balance, so I try to put the clothes in evenly. BUT it doesnt matter, it goes off balance. When the washer is downstairs, it gets to be a pain. The lid lock is a pain also. If you forget to put something in the machine, you hit pause button then you have to wait forever until it unlocks, and wait forever to unlock when it goes off balance. When it doesnt go off balance, it washes everything just fine. But if I knew what I know now about it, I would have never bought it....... I would recommend a different washer and check the reviews, which I didnt do. :(

I purchased a Whirlpool WFW9050XW washer in Aug 2011. I have had nothing but problems. Sears sent repair tech 2x; it would work for a couple months and stop. Whirlpool has sent new motor, tub, switches, etc. I feel I bought a lemon and I want Whirlpool to replace the machine.

I had a Whirlpool oven for 14 years. It worked great and the control board burned up during the cleaning cycle. I purchased a new whirlpool oven that did not have an exposed bottom heating element. It takes way too long to preheat and if during baking, you need to change the temperature, it starts preheating again and the displayed temperature is lower than the original temperature that was set at the beginning; and it takes too long for the oven to reach the new temperature. This appears to be the result of the bottom heating element being hidden. Heating and maintaining a consistent temperature is far more important than being able to clean the bottom of the oven especially when this is a self-cleaning oven.Updated on October 20, 2015: This is an update on my last review. I was cooking a cake at 350 degrees and when the designated time was up, I opened the door to check for doneness. The cake needed to cook a little longer, so I closed the door and the temperature immediately went to 300 degrees and started preheating again which of course caused the oven to get too hot for the cake I was baking. Who is designing these ovens??? Certainly not a person that cooks on a day-to-day basis. I will never buy a Whirlpool oven again.

I am a very unhappy owner of a Whirlpool Cabrio Model: wtw5640xw0 & matching Dryer. About 4 years ago, my husband chose to replace our 11 year-old Maytag Performa Washer & Dryer instead of fixing a part that needed to be replaced in the Washer. I was upset with the very first load of laundry in the Cabrio and I was extra upset that my husband had junked my perfectly awesome working Performa Dryer. )-: First of all, the Cabrio set is Extremely LOUD! Secondly, I often have to wash loads more than once because they do not get clean the first time. Next, the Washer is Always knocked off balance. Ive resorted to using the settings on the Washer with the low spin every time, no matter how light the load. And, now there is something wrong with the lid lock mechanism (which has always sucked anyway), but this is a new problem... I was just checking on the internet to try to figure it out when I stopped to write this review. The lid will not lock & the lid lock light wont go off, so the Washer wont do anything at all! I can not express enough what a piece of junk this Washer is & Im never going to allow my husband (who doesnt even do the laundry) to choose my Washer & Dryer again!

My Whirlpool is reliable, however it does not have a soaking cycle which I would enjoy having. It also has an unbalancing problem when speeding if I attempt to wash heavy loads on the extra large load cycle. However, it responds very well on large loads for heavy washing. Shortly after I got it the timing had to be replaced, but no problems since then. Overall pound for pound for the dollar it is a good machine.

I originally purchased a Whirlpool hot water heater in 2005. After numerous problems Whirlpool agreed to replace January 2010. With the new hot water heater, everything was fine for the first two years. Now about every 6 months, we are having the thermocouple and the igniter. Each time you order the part, the part is free but you have to pay $30.00 for shipping. I am tired of dealing with this. We have decided even though we still have a warranty left on the hot water tank we are going to purchase a different one and never ever buy another Whirlpool product. They do not stand behind their products.

54 weeks ago, I purchased a Whirlpool Duet Washer & Dryer. The first time I used the washer, it flooded my laundry room. After some grief, it was replaced with a second Duet washer some 53.5 weeks ago. Yesterday, that washer, 10 days past the 1-year warranty, failed. It gives error messages F06/E01 and wont complete a cycle. Calls to Whirlpool resulted in a refusal to acknowledge any product responsibility (out of warranty) but offers of extending the warranty for the cost of repair. I will never buy another Whirlpool product and will actively encourage any other consumer to shop elsewhere.

I had my entire kitchen re-modeled in May of 2013 and purchase all new Whirlpool appliances. I work for Standard Pacific Homes and purchase the identical appliances we provide in our homes. I am so disappointed in the refrigerator. Two months ago it stopped making ice and I was told to replace the filter and it would be OK. I did that and still no ice. I bought ice trays. A couple of days ago, I came home to find water on my kitchen floor coming from under the refrigerator. I called Whirlpool again and no real help.... Told me to call Lowes. I called Lowes and they gave me 3 more numbers to call for service. None of those service providers had any available appointments and told me to call Whirlpool. Meanwhile my refrigerator is standing in the middle of my kitchen so I can keep the water mopped up. The refrigerator was so difficult to move. Getting the feet moved up so the wheels could touch the floor took an hour and I ended up with bruised hands. My lesson in this is to buy a better brand next time and go top of the line. I sell these to our buyers at Standard Pacific Homes everyday..... Wish I could believe in the product.

I ordered this Whirlpool 29 cu.ft. white french door refrigerator online from Goedeckers on April 26, 2013. Delivered May 15, 2013. Ever since we got it, there was a frost buildup in left back of ref. Also ice would fall out of dispenser all by itself. Also a buildup of ice under ice bin. Water would also drip from dispenser. We thought maybe since it was new these problems would go away. But they just got worse. I called Whirlpool & they sent out tech on 8/12/13. He told me Whirlpool has a problem with these refrigerators & would order parts. Well after 3 times of cancelling repairman due to parts on backorder, I told repair I would call when parts come in. I keep calling Whirlpool & keep hearing parts are on backorder, saying parts will be in in 7 days. I call back in 7 days and hear the same lies. Its a shame that they cant get parts in knowing that there is a major problem. It sounds like a real quality control problem. I really pride myself on buying American made but Whirlpool is not helping my case for buying American made. It would be nice if they offered to replace it being they cant seem to find parts.

If you are in the market for a new washing machine, steer clear of the Whirlpool Cabrio (or any Whirlpool for that matter). We have had issues with ours from the beginning. We had Whirlpool techs come out and were continually unable to fix the issues. Eventually they told them that it was not broken, even though one tech told us it definitely was. After four service calls they just stopped sending out techs and told us too bad. Now after less than two years it is leaking from the bottom. Yeah, Whirlpool, theres no problem with it. Save yourself the potential headache and get something else. Anything else.

Electric hot water heater model E40H6-45-100 - Purchased at Lowes. Husband installed, tank filled, no hot water coming through house lines. Called support center several times after trying each recommendation that did not work. They kept saying it was a plumbing problem. My husband is very smart when it comes to electrical and plumbing. He has done numerous repairs to our homes over the last 30 years we have been married. He knows what he is talking about and told the support tech that he believed it was a faulty water heater. She immediately said the units are all tested before they leave the factory. The final step was to remove the nipple that the hot water flows through out of the tank and remove the two black bellows. Now my husband can see directly through the piece but also decides to put his finger through the the open whole on the top of the tank and cannot get his finger through - it is blocked. He gets a flashlight and a screw driver. Puts the screw driver through a thin plate that was blocking where the water should be coming through. He can now actually see the water in the tank. This was the whole problem! So they could not have tested this tank. They did give us a ref number to take parts back to store to replace parts we already bought and cannot use. Its the time and energy on whats suppose to be an easy job that counts. Will not recommend Whirlpool products to anyone and probably will not purchase any in the future. Ours was not as bad as most of the other reviews I read but wanted to advise others who may think about what brand to purchase.

My Whirlpool washing machine has not worked properly from the first day. Whirlpool washing machine customer care is pathetic. I bought a Whirlpool semi-automatic washing machine, Sparkle. This product is in warranty period. From the first day, this product did not give right result. Machine sound is very high and I called customer care center may times (around 9-10 times). They sent this machine three times in service center but the results remained the same. The problem arose when we put some load in it. He said the gear box should be changed and the machine should be cleansed off the dirt. He offered some powder costing Rs. 1500/- to be used in washing machine.Later, he asked Rs. 350/- for other parts after two months then I paid them again after 15 days for a piece that did not work. Then, they want to charge me Rs. 350/- again. When I showed the previous slip, they then changed that part without any cost. But after 15 days, again same problem occurred. They charged me 150/- Rs. but the problem is the same. Total money I spent is Rs. 1500/-+350/-+150/-. I also purchased a stand and cover for safety, but what will happen if product is not good? The technicians visited many times and they all said this piece is not okay but they cant do anything. The company should change this product. The machine is still rotting at my home. Im not sure if it could be accepted to be exchanged for a new one. Customer care gave us the satisfaction code but technician did not ask for this code. Im really very sad that I have called around 10 complaints within two years. Why are you people not listening? You all are doing time pass. You can check my complaint codes in your records and ask your technicians about Noida. Many times, I did not note the complaints number. Please open my file and check the issue. I told the technician many times that I want to talk to your seniors and want to tell them the problem because from the first day, it was the same, but they refused. I have also purchased a 320 LT fridge from you but that product is very nice. You should listen to our problems. This was not expected of such a branded company. I promised myself that I will never in my life purchase a Whirlpool product and advise the same to others.

We purchased the unit in March, by April it wasnt cooling. In June it shut down. In July after 8 tech appointments and repairs. Whirlpool finally said they would refund my purchase and I should see the money in about three weeks. That would be about a week longer than the refrigerator worked. I dont have the money to just get another one so I guess the family will be without a refrigerator for another month. That means shopping every day for perishable for a family of 10. I would not recommend another Whirlpool product. This is no joke, every time I called them one of the first things asked was Did you get the extended warranty? Why would they ask, sounds as if they dont trust their own product either. This unit was purchase online through Sears.com. Purchase price was $2299.99. Order placed on March 4, 2017.

Good microwave and will have 1100 watts Of use for TV dinners and warm up food. Do well and goes well. Please use this as well to warm up TV dinners smaller than most. Test them and see what is best. Go.

I purchased Whirlpool Duet HT front-load washing machine with model #GHW9400PLO. After a year of owning the product, failure codes continued to appear. I have followed the direction under the troubleshooting page which said to cancel and unplug the unit. After doing this over and over, I finally took the top lid off to inspect the problem. A ribbon cable was torn due to the top lid rubbing against the lid and the drum. I called Whirlpool and this was not covered (go figure). I then asked for the ribbon cable and they said they cannot just supply the ribbon cable and that I would have to buy the user interface which is $191 plus a $35 core fee because they re-bill them. What a rip off. A ribbon cable from a computer store would only cost $10.00. After that repair the Micro Machine control went out which is code F11. Code F11 is all over the web because this is a defective part that Whirlpool should do a recall on but why do that when they can charge $310 plus, get this another $35 core charge because they re-bill them? If you are not mechanically inclined with these parts plus labor you could have bought 2 washing machines. But who in the world would buy 2 pieces of junk right?Bottom line is: do your research and buy from a company that will stand behind their product because Whirlpool will not! They know by the number of parts they ship out that that part should be recalled.

My Whirlpool dishwasher washes dishes well, when it drain but it will not drain. I purchased insurance repair service from AIG. AIG is a total rip off. I paid them over $300. I have called many many times. They promise someone will call but not one ever has. I would never work with AIG or Whirlpool ever again.