Whirlpool washing machine has always been reliable for me. I have owned 2 and they lasted me many many years. Its easy to use, and cleans clothes perfectly. My family is also a fan of Whirlpool appliances.

New Whirlpool Refrigerator makes roaring noise like a broken engine. Whirlpools 2 technicians listened and confirmed but said that as the refrigerator works they can do NOTHING about it. Whirlpool management would not respond to repeated requests. Dont even get near ANY Whirlpool products!!!

The washing machine (WFS10055CD) was working fine until two months after the warranty period...It worked the night before, but in the morning, there were no lights. I emailed Whirlpool, but I received no reply. So, I called their number to ask if they would honor their faulty product JUST out of warranty...They wouldnt accept this...I live in an area with no service agents for them so I would also require freight costs of 1,000 km away...I have had an electrician examine the unit to find it may be the control panel/mother board...seems funny many issues with Whirlpool machines JUST out of warranty!!!

Purchased the fridge in 10/2014. 3 weeks later, condenser died and all our food spoiled. 1 year later, no more warranty, starter died, had it replaced for $280.00. Compressor died today 5/2019. Company refuse to do anything about it and will cost close to $1000 to replace compressor. Stay away from this company and their products.

We decided to upgrade to the Whirlpool Cabrio Elite set after 20 years of having the same washer and dryer. Yes, they were still working after 20 years, but we wanted the bigger and better and shinier appliances when we bought our new house. The dryer is fine. Dries a load in 38 minutes. The washer is a regular POS that never should have been put on the market. The best thing about this washer is that it has a transparent lid that allows you to watch your laundry getting dirtier as it washes.Its less than a year old so I havent had the problems with the bearings and such yet, but as far as cleaning, it DOES NOT DO THE JOB! My blacks have white residue on them EVERY SINGLE time I wash them. I end up washing/rinsing/rinsing my darks which definitely defeats the save water function. A regular load takes an hour to wash, and then another hour to rewash, which definitely isnt time saving. My whites are grey and often come out with the same dirt on them as they had going in. Im talking about dirt that you can scrape off with your fingernail, which tells me that they arent even getting wet, nevermind washed.The large capacity is a myth, since-- as per instructions--you can only line the dirty clothes around the centre hub without covering the little silver bump in the centre, or else the clothes wont come clean. This wastes a large amount of capacity. In a nutshell, your darks will come out dirtier, your whites will come out dingier, you waste more water from rewashing, you waste more time and electricity due to long wash cycle and rewashing. I will never buy another Whirlpool ANYTHING again.

This stove was in my house when I bought it. It has a glass top on it with marks for each type of burner below. There are a couple of different size burners which makes it very useful. The only problem is with the glass top feature. It gets marked easily even when you try to be careful and many of the marks will not come off with anything I have used. The marks are so prevalent that I would never buy another one.

Ice maker kept freezing up. Im continually taking the ice tray out to unfreeze. The frequent removal of the tray eventually broke the tab off on the liner. Ive now been told this (liner) is not a replaceable part and since that is the case, the warranty will not cover. Im upset that the repair technician did not process the claim properly and state that the make had a problem freezing. What kind of company would manufacture a product that would have parts that are unrepairable? You spend close to $2,000 on a refrigerator, wouldnt you think you would have an ice maker that works? I know they hope to sell more appliances this way but you can bet I will not be purchasing another Whirlpool anything! I will also be retracting my recommendations to friends and family to purchase a Whirlpool. The company does not stand behind its products.

My Whirlpool is reliable, however it does not have a soaking cycle which I would enjoy having. It also has an unbalancing problem when speeding if I attempt to wash heavy loads on the extra large load cycle. However, it responds very well on large loads for heavy washing. Shortly after I got it the timing had to be replaced, but no problems since then. Overall pound for pound for the dollar it is a good machine.

I bought my fridge in late 2008 and I am already experiencing potentially expensive repairs due to what I believe is a defective design system, of which, consumers are having to bare the consequences for those who collected our hard-earned cash and delivered a lousy product! I saw so many similar complaints about the ice system on this fridge that I am almost positive that it qualifies for a class action suit and settlement. How about a collaborative approach to this since we have all suffered needlessly? Tell me what you think and if you are in on it.

DO NOT BUY ANY WHIRLPOOL PRODUCTS! After purchasing a dishwasher in April 2017, it died after a year. The subsequent years have been filled with waiting all day for service repairs 6 times and living without a dishwasher for up to a week at a time. After 6 services the product continues to malfunction. They are refusing to replace the item and now inform us that we must pay to have it serviced. I cannot stress enough that no one should purchase any products from Whirlpool as they are sub-par products and they do not stand behind their products.

The unit is electric and Im not impressed with the oven temperature consistency. The oven either runs hot or cold so trying to bake anything to perfection is a challenge. Ive added a stand alone thermometer just to ensure cooking properly.

I have purchased in the past all Whirlpool appliances all at the same time. Washer, dryer, dishwasher, refrigerator, stove, microwave and I have had issues with every product after the first year, from plastic parts failing. That should have been made out of metal, to motherboard replacement. I work Hard for my Money, and when I need to buy a new appliance, I want truth in advertisement of what I am spending MY MONEY on. I would like a product that is built to last!!! If whirlpool cannot offer this we need to COMPLAIN all over the Internet until whirlpool changes their design and uses better parts for their products. I as a consumer deserve this.

l will never buy Whirlpool appliances again, nor do I recommend to anyone. My wall over was 1 1/2 yrs old with a worthless 1 yr limited Warranty. I had Total Appliance from Cleveland do the repair, the only ones I found at the time that would work on this type over with a Digital panel. I think the engineers think we all live in Silicon Valley. Unfortunately the cost to repair after I cleaned the oven for the first time was $384.00 to unlock the door and 2 trips and he had to remove the door to replace 2 fuses so the door and panel would work! Im afraid to clean them oven again..I called Whirlpool and the first wait time was 70 Mins... I put the phone on speaker, finally I talked to 2 Customer Service men to no avail. He basically said my Warranty was up and nothing they could do! I said I was going to complain on Social Media and he didnt care! Go to Consumers Digest before you buy any new appliance! PS, I also went on YOUTUBE and you can see all the TROUBLESHOOTING ON MANY APPLIANCES!

Purchased a new Whirlpool built in microwave oven model WMH 310 17 AB-1 in July 1, 2013. As of February 2014, the glossy black finish on this microwave is dull where the finger push controls are and scratched up along the top of control panel and top front of door. We only use a wet cloth and towel or microfiber cloth to clean this microwave; nothing that would be abrasive so very disappointed in this product. It looks quite ugly for a new appliance. I did not anticipate how delicate the outside surface would be - never in over 30 years have I had this problem with another appliance, even stainless steel does not scratch like this.

I love my Whirlpool front loader washer. It is replacing the Maytag Neptune I had for a few years. This Whirlpool has outlasted that Neptune so far by 3 years! So far no issues. I only wish I had purchased the matching dryer at the time.

I have had nothing but Whirlpool for 40+ years, I am on my 2nd washer and 2nd dryer! They do the job I need, they are very reliable. If I had any downside it would be they don’t hold a queen size comforter.

I have Whirlpool gas range, model # WFG361LVS1. The igniter went out after only one and a half years of light use (4-5 times a week). I did not buy the extended warranty, so part is not covered. I only asked that they send me the part for free. I talked to a supervisor at Whirlpool (Dave). He said I should have bought the extended warranty. He said he could not help me. He was also very rude. I will never purchase another Whirlpool product.

Just cleaning the outside of our piece of ** oven. Must have hit either the on or off button to lock because the damn thing locked. Tried unplugging it, pushing all the buttons suggested on these websites, etc. Hell, even tried to call Whirlpool, where I just talked to a computer. Lesson learned: Whirlpool wont get our business again. Period.

AVOID Whirlpool water heaters - Bought two 12 year warranty water heaters from Lowe’s in 2014. Model NU50T121-403 from Whirlpool. Thermocouple went out within the first 4 months. Called WP, they gave me a number to call for an authorized contractor to come out. Made certain to tell me that PARTS were covered, but not labor. $300 for the labor and two days later, hot water is back on. SAME THING happens again 6 months later, then AGAIN in Sept of this year. So 3 guys have been out to all replace the same part. This morning, hot water is out. Both tanks. Can’t keep pilot light lit. Called WP. They gave me more numbers of authorized contractors. No hot water and now I’ve got another $300 I owe to fix the SAME BROKEN PART. I wonder if this is how their last class action lawsuit got started?

My Whirlpool microwave oven is terrible. The whole point of a microwave is to cook things faster and make ones life easier. The main problem is food doesnt actually cook due to sensors. Cooking bacon, for example, should be a simple, quick item that easily cooks in a microwave within minutes. Not w/ this Whirlpool! The sensor would not allow the bacon to cook - even after 20 minutes of trying!! Foods such as Bob Evans family sized mashed potatoes cant be cooked either. The sensor in this microwave ensures that only the outer layer is hot while the middle is stone cold. Also, the fan has never worked from day 1, and were now on 6 months of ownership. This wasnt a cheap microwave either, so Im SOL. Please dont make the mistake I made. Dont buy Whirlpool.

I suppose the idea was good - less water. However, when you are washing clothes, water and agitation are key. Without an agitator, clothes are just spun around with water and detergent. This washing machine (WTW4950XW2) couldnt clean any dirt off clothes. Clothes go in dirty. They come out damp, wrinkled, and dirty. I got this washing machine free from my father and am thinking I got ripped off. No wonder he gave it away. Piece of junk.

I purchased a Gas Stove from Home Depot on 11/23 and it was delivered on December 3rd. My God, Im having a dinner party tonight and the stove doesnt heat up past 170.. Unbelievable!! Need a replacement gas range. Tried to chat and call Whirlpool unsuccessfully. I am very one disappointed customer right now!

I bought a 38 gal. low boy electric Whirlpool water heater from Lowe’s. It was replaced because of a leak around the upper heating element after only one year. Now, the replacement heater is leaking in the same place, and it has been leaking so long that the electric terminals are rusted, water is standing in the cover plate, and the lining is soaked. I cannot see behind the plate and dont know it until the water finally made its way into the drip pan beneath the heater. When we saw the standing water, we turned off the electricity and shut off the water to it to stop a fire hazard. The warranty is up on my water heater, but my concern is that this could cause someones home to burn.

I purchased a Whirlpool Cabrio Set from a local store. Just over a year later, the washer got very loud like a jet engine. Called the registered repairman, he came out took a look and said he would get back to me. Called him 3 times over 3 weeks, no show (Hoodland Appliance). Called someone else, repaired it for $400.00. Called Whirlpool, they are not interested. 2 years later now and the machine is getting loud again. This is due to the spin throws water up and it is able to get out of the tub and down into the barring and the soap residue wears the barring out. Bad design. Called Whirlpool again and again they are not interested but can put me in touch with a repairman. I will not repair again but will use until dies and buy something else not related to Whirlpool. So much for energy efficiency.

The Whirlpool fridge we bought kept freezing food in the fridge. Local technicians couldnt solve the problem after replacing some parts. They called Whirlpools technical person and found there are other similar cases for this model. We were told to wait till they solve the engineering issue. We require to replace another model. Whirlpools customer service Supervisor whose name is Alisha talked very arrogantly and hung up on us. In one word, bad products, bad service, bad people. We will stay away from any Whirlpool product in the future.

I purchased this washer 4.5 years ago. I have always been a Whirlpool customer. My parents had Whirlpool washer and dryer while I was growing up in the 60s. When I got married in 1976 I bought a Whirlpool washer, dryer and refrigerator. They lasted 19 years!!! Then I replaced all 3 in 1995. Again, lasted 16 years. I gave the washer and dryer to my sons when they moved out--its still working.So I thought I would reward myself with a new Whirlpool washer and dryer in August 2011. I didnt know about the pitfalls with the high efficiency washers. The dryer is great, but I HATE my washer! The lid lock is ridiculous, we should be given an option to override it. The sensing takes forever. The low water level leaves clothes unclean, and with detergent residue, causing the need for another rinse cycle. This saves no water if you have to run it twice. Not to mention how long it takes to do a load. Then it doesnt spin all the water out and you have to run a spin cycle. It aggravates me every time I do laundry. After being a Whirlpool customer for over 35 years, its time to move on. I just ordered a GE machine that is old school, no sensors, no lid lock, and I can control the level of water. Whirlpool doesnt make these simple machines anymore. Youre going to lose a lot of customers if you keep selling the trash. This is the worse washer I have ever had. My adult son went into a rage last night trying to use it, he forced the lid open and broke the lock, and of course it wont work at all without the lock. Good thing I ordered the GE washer the day before, it will be here in a few days. Cant wait to bash the Whirlpool with a sledge hammer, it will give us great satisfaction! Are you listening Whirlpool? Your designers need to go back to the drawing board. I realize this is not just a Whirlpool problem. Ive seen complaints about kenmore and every other manufacturer that makes these stupid low water sensing machines with lock lids. If consumers are too stupid to keep their kids out of the washing machine, maybe they should have their kids taken away.

Whirlpool Gold Series French door, bottom freezer. - This fridge is beautiful. Thats as far as the pros go for it. The Freon is leaking and cant be repaired because of where the leak is coming from. I can always tell when its time for a recharge because it leaks water profusely when at a low charge (every 4 to 6 weeks). We paid over $1800 for this fridge back in 2013. It has been just over two years and we are now having to replace this fridge. I cant express my frustration at this point. Whirlpool wont do anything to help us. They told me, You are out of warranty, and thats all they have to say. Thats over a thousand dollars a year to own this POS when you consider taxes. Over $1250 a year when you consider the service calls along with it. I will not purchase another Whirlpool product ever again. I am disgusted by this company and their refusal to stand behind their product. They have literally stole money from me and are laughing about it. Do yourself a favor and stay far from Whirlpool.

My NEW Machine Top loader HUGE drum. Have problems with clothes not looking like they’ve even been washed, Spun so hard they are twisted all to heck. And white stuff - my oxy powder maybe? Not dissolved. My old machine was a Kenmore 30 yrs old. Thought I’d be able to trust whirlpool but not sure. Am I missing something in the loading process. Seems to read something bout not Covering the knob on the bottom. Is this true?

I bought on 14/4/12 a Model-205 Orchid Wine refrigerator. The defrost knob was replaced by service last month, as it was not working. For the past four days, there are lots of water formation on the freezer door and vegetables are getting spoiled due to water formation. I request them to replace the refrigerator.

I like the dishwasher. It cleans pretty well. Some time it soap doesnt open and the dishes don’t get cleaned. But when it’s working good the dishes get cleaned very well.

I bought a new Whirlpool fridge that has been a piece of junk since the day I bought it. The minute the warranty expired. The thing broke down. The corporate service center was a joke. 15 min wait time just to get through. Then a runaround of misinformed referral numbers. Minimum charge $200/30 min just to have a service rep even look at it. And then $100/hour + parts after that. Highway robbery. My doctor doesn’t even charge me that much. I will never buy a piece of junk WP product ever again. Their customer service is rude and non-existent. The company does not stand behind its products. Don’t buy!

Cabrio washer broken lid, asked WP to fix warranty. They offered $250 off $500 Amana washer. Said just send me the new lid that would cost me $210. They said no. Asked if they would send me metal lid with hinges less than $100 they said no. Told them I was not going to spend more money with WP, my turn to say no. If you are wise dont buy WP products...

About five years ago, I purchased a top load Whirlpool Cabrio washer and matching dryer. For the past couple of years or so, this washer gets out of balance every spin cycle. It sounds like a mac truck running through my house. At this time, I do not have $300-$400 to buy a warranty when I feel that this problem is so widespread (via internet complaints) that Whirlpool should fix this problem. I replaced a perfectly working 13-year old Maytag washer simply because my dryer went out. I have contacted customer service with no results. I recommended this washer to my neighbor about a couple of years ago and now I am sorry I did. Little did I know that three years in there would have to be a repair. As you know, this isnt a bottom of the line cheap washer, therefore, I wouldnt expect it would be acting like one after this period of time. I asked Dave who at Whirlpool cared and basically, he had no answer. I told him that I would expect a company as large as Whirlpool to have people who have the job of searching the internet to see what people are saying about the company and if they did, they would know this was a problem with these washers and would initiate some sort of recall. This is such a bone of contention at my house that I wish the thing would just die so I had to go buy another (and trust me it wont be a Whirlpool). But rather, I get to listen to my washer thrust throughout my house every load I do.

Whirlpool refrigerator Model type 14TFA seems to really keep things cold with good airflow in the freezer, and below shelves in bottom half are also keep cold adequately. Standard white appearance... somewhat boring.

Bought a dryer (wgd9050xw) 3 years ago. We bought a more expensive one than we had originally picked out. Every year its had to have a repair of same part. First year it was under warranty which tried to bill me so I had to dispute the charge. Charge was finally dropped. We just had it fixed again for third time in 3 years. Its a fire hazard because belt wears a pulley and basically melts it and gets belt hot. I just contacted Whirlpool and awaiting response.

My experience was terrible. We purchased a side by side refrigerator on June 27, 2011 and it stopped working in December, 2011. We reported this onDecember 19, 2011. A repairman was sent out a few days later, who could not solve the problem because a piece had to be ordered. The piece was ordered and the repairman came to install the part on December 28, 2011.The refrigerator is still not working at all. We have been without ice for this period of time, not to mention the inconvenience of non-refrigeration of food. I pleaded for them to pick up the refrigerator and give me even a partial refund. I was told that three repairs had to be done before they would even consider picking up the refrigerator. I am not a person who complains, but this was ridiculous. I will never purchase another Whirlpool product.

I have a 3 1/2 year old 9400WFW WP washer with a 70 error code. After viewing complaints on various websites, it appears this is a large scale problem with Whirlpool Duet owners. I just got off the phone with WP customer service and explained how many complaints are out there for F70 code error, yet they do not have a recall on this part!How can this be justified? This is a non-mechanical part of the washing machine. The life expectancy should be more than 3 years.My washer is not overused as there are only 2 people in the household. I do not want to pay the cost to repair this. I think WP should issue a part recall on this model. Does anyone know how to find out how many replacement CCU or CPUs have been purchased in relation to the number of 9400 WFW sold or if there may be a chance that WP needs to reconsider a recall?

Purchased this fridge just over a year ago WRF555sdfz for over 2K. The stainless steel is starting to come OFF. Advertised as stainless Steel. Must be fake! Called customer service. I was told they could do NOTHING because it was a cosmetic issue. Remodeled our entire new kitchen. Thank god other stainless steel appliance are made by other manufacturers with no “COSMETIC” ISSUES. Will never buy another Whirlpool product and I will tell everyone I know.

We made a major appliance purchases on July 1, 2010 of a Front Loading Washer and Stackable Dryer. The dryer required servicing at 11 months with was was covered but it required a major service for a broken motor control board. This has nothing to do with regular usage. The cost to repair is over half the total cost of the appliance.This is unacceptable on a 15-month old washer. Whirlpool would not stand behind their product or service. I had to purchase their Repair Plus 1 program to get it fixed. What a racket!

I purchased a Whirlpool electric range 18 months ago. Recently, the oven started overheating. The display reads Fault detected. Press start to clear. Pressing start did nothing and the oven door was locked as though it was in the self-clean cycle. We had to trip the circuit breaker to turn the oven off and allow the door to open. The food inside was ruined. After three episodes in one week, I scheduled a service call through the Whirlpool website. When the repairman came, he determined the electronic circuit board was faulty. His suggestion was that I buy a new stove since the repair would cost $425 (the part itself was $280). Not wanting to replace a stove that wasnt 2 years old, I went ahead with the repair. I called Whirlpool to lodge a complaint and although the customer service rep was polite, he basically told me that all electronic appliances fail sooner or later and the company will not stand behind this appliance because its out of its 12-month warranty and I didnt buy the extended warranty. He also told me the company doesnt have any record of this being a common problem or excessive complaints about these ranges. But I see many people on this site with the same problem. I wish I had read this site before I bought this stove. Since I cant afford to replace my appliances every year and a half, this will certainly be my last Whirlpool.

On December 24, I was planning my annual Christmas Eve dinner when my oven just decided to quit working completely. This was the third time my oven broke down on me. I called Whirlpool and they pretty much told me theyll get to me when they can but it was the holiday. So I understood that it would be a few days. I had a technician come out to my house on December 27 and tell me that he needed to order a fuse. He called all over the state to find one but no one had one so he put it as an emergency. The technician did everything he could to accommodate me but could only do so much. So I waited and waited but heard nothing.Today, January 3, I called the department to see when my part was going to be here and they tell me January 10 - unacceptable. I called the management team and spoke with Tiffany who pretty much just told me, Sorry. You have to wait five business days to find out if the part is available. If not, then we can discuss sending new ovens. Why would we have to wait five business days from January 3 when it was ordered on December 27? Look, Im a very reasonable woman and this is the first time I have ever complained online about a company. But I have gone 10 days without an oven and I have a family that I cook for daily.My ovens are four months old so this should not be happening. And when it does, there should be parts to fix it or a replacement on hand because no family should have to go without an oven when they just paid a ** load of money for it. Customer Service should be a little more sympathetic and a little less about business because at the end of the day, theyre not the ones suffering, we are. Also if this part is on back order, that tells me that this probably happens often. Maybe Whirlpool should recall this oven model because whoever heard of an oven overheating? Get it together. I will spread the word of mouth about my experience!

We purchased a Whirlpool upright frost-less freezer (model # EVL201NXRQ05) in October of 2008. So, you see, it is not even four years old. A few months ago I noticed that some things in the freezer were very soft. I looked at the back of the freezer and there was some ice buildup around the area where the coils are located. I took everything out of the freezer and removed the panel over the coils. There was major ice buildup on the coils. I completely defrosted it and dried it out. I restarted it and it seemed to be working okay. But a few days ago, when I got something from the top shelf of the freezer, it was not even frozen. So, here I go again. I removed everything from the freezer and have defrosted it again. However, this time, as soon as I turned it back on, the ice started building up on the coils immediately. It is impossible to contact anyone at Whirlpool that gives a crap. We have also been having problems with our Whirlpool Gold refrigerator. We have spent over $250 on it and it still is not working properly. I would love to just throw them in a ravine, but we have spent a lot of money on these appliances. We thought that Whirlpool was supposed to be number one in appliances. What a huge mistake we have made and it is costing us dearly.

Our Whirlpool Duet front loader washer developed a mildew smell and started making a horrible banging noise on the spin cycle. We had a service man come out and the concrete weight had broken in half. He said this was not uncommon. I just did a Google search and apparently this is a true factory defect. Luckily we had purchased an extended warranty. I always thought Whirlpool was a premium brand but after this experience I will never buy another washer from them. They should do a product recall.

Rust started forming early on our washer and spread quickly. Our house is air conditioned and not near the ocean. There was no reason for the rust. Poor quality finishing is the only explanation. When I called to complain I got nowhere. I wish I could show a photo on this website. It would dissuade anyone from ever buying a whirlpool.

I hope this review makes it to the president of Whirlpool! My husband and I built our first home and finally moved into it on April 22, 2017. We saved everywhere we could and I did my best to research my appliances. I was so excited to buy a BIG refrigerator for our family of five, (3 are hungry teenagers!) after years of using a smaller side-by-side. We went with the 31.5-cu ft French door/drawer with dual icemakers, model #WRF993FIFM. The original price was $3,599 but we got it on sale for $2,298 at Home Depot. After only 5 months it stopped cooling! I woke up one morning to find a fridge full of spoiled food!! After waiting 3 weeks I had 2 different repairmen come out and have been told that it is un-repairable due to two parts that are needed, one of which is on back order indefinitely. Ive called Whirlpool numerous times and only get the run around and Im sorry mam we cant do anything else. So Im just supposed to be without my refrigerator until who knows when?! The first 2 weeks of this crap we had to live out of Igloo coolers on our back porch. That meant no buying real groceries, only milk and juice and drinks. Thankfully the awesome people at Home Depot brought us a loaner, which is an apartment size fridge, to use while we wait. So now I just have to walk across the house to my garage every time I need something, and I cant buy much food because it wont fit!! Im so disgusted with how Whirlpool is handling this!!! Not only did we buy our fridge but we also went with Whirlpool for our stove, dishwasher and microwave, and we already owned a newer Whirlpool washer and dryer set. We spent thousands of dollars and cant even get them to exchange this piece of junk! Come on Whirlpool, surely you dont treat all your customers this way!? Do the right thing and let us have a replacement!!!

Takes 2 or 3 full cycles to dry small load. Big disappointment, drying is such a horrible experience since the clothes never dry when I expect them to. Not satisfied at all.

I have always used Whirlpool washers and dryers. There are many models to choose from to meet a families needs. I can only remember one time when I had to replace an operating part to improve performance.

I purchased a Whirlpool hot water heater several years back with every bit of the Bells & Whistles that Lowes could bestow on it paid for and documented on the tank; Limited Lifetime Warranty and Lowes Professional Installation. It failed after several years with multiple problems. First, the bottom heating unit failed at the same time, noticing a leak from the top heating units external cover where a supporting screw had popped out, leaking down to the floor. Not only was the Whirlpool 800 number a scham of silence, with no estimated wait time and after approximately 20 minutes, a rep picks up as I could hear their legal department on an alternated line instructing and listening in, then dropping off when those crooks felt I had been placated enough to go onto to the next sucker. I have all Whirlpool Gold & KitchenAid Superba appliances in my kitchen and never thought I would be saying this but I will never purchase another Whirlpool Appliance or shop at Lowes again!

Purchased Whirlpool Microwave 1.6. The design has 5 BIG flaws. 1. Too large in depth, cabinets on each side cant open. 2. The one light under unit is so far to the back wall, you need a flashlight to cook spaghetti or use stove. 3. Too large in height, cant get a big pan on your stove. 4. Top of unit is open so much, if you spilled something from the cabinet above it would go right inside the works. 5. Instructions are hard to read & figure out, the wall hanging support is just one piece and if you dont have 2 main beams youre out of luck. GO buy a GE, put it up in 1/2 time & good & secure and works great. Has 2 lights on each side under unit. Fingers over the holes at the top. 1 inch shorter, 1 inch thinner. To my surprise the turntable is even larger, go figure.

I have had my Cabrio for a year now and quite frankly, I find more satisfaction taking all of my laundry to a local laundromat. There is no soak cycle and when you have a kid in sports, that doesnt help. There is no agitator, and I am now convinced that they were originally in all washers for a reason. My clothes have all worn out and are shredding, not to mention my very expensive bath towels that I am now cutting into rags. This was the worst purchase I have ever made in my life and will never even look at a Whirlpool again. When I bought my house, I had a Maytag that was 35 years old and it did a better job than the new Cabrio. Should have stuck with that brand!

I had purchased this washer from Lowes last September and had problems almost immediately. First of all the lid would lock and hold my clothes hostage till it decided to reopen which could be days. Finally it never opened again. Called customer service and sent someone out. It took almost a month to get it back to running. 1 week for him to show up then 2 more weeks for the part to come in 1 more week for him to grace me with his presence again. Had to call again because the mother board then went. Another month. Now just out of warranty I go to wash and its dead. No lights on nothing. This machine is the biggest pile of garbage and waste of money I ever spent. Barely made it 1 year.

I bought the Whirlpool WTW 5000DW1 washer and dryer to go with it. Within the first 2 weeks the plastic handle broke on the dryer. Ive been using the corner of the plastic handle ever since to open the dryer. The washer is the worst washer I have ever purchased in my life. The tub doesnt fill up over the clothes half the time. It is perfectly balanced on the floor but it always bounces around and you cannot open it to rearrange the clothes because they lock the lid. The only option is to try to hold it and wait for it to finish or start over by pressing the button for at least 3 seconds. I have had a few items get shredded by it and a lot of times the clothes dont get cleaned and rinsed properly. Even on 2 rinse option. Just the fact that it has a 2 rinse option is a big red flag. It is supposed to be a energy saver and water saver but that isnt true. If you have to wash and rinse the clothes twice because it has spots from the detergent still on the sheets, something just isnt right. Whirlpool shouldnt even put a product like this on the market. I have owned many Whirlpool products before this but this is the last Whirlpool product I will ever buy. Obviously Whirlpool doesnt test its products or care about quality.

I have purchased a Whirlpool refrigerator and it has passed only 1.5 years and I have repaired it twice. The cost of repairing is also very high. Service charge is very high so I called a local party to solve the issue. They checked and found that a capacitor and a compressor relay is not working. They replaced the two and debited a cost of Rs.1500.

Cabrio WTW8200YWO - We purchased this washer five years ago. About a year ago it started getting noisier and noisier on spin cycle. Now it sounds like a jumbo jet taking off. A Google search quickly revealed this is a ubiquitous problem with these washers. As we are in our 70s and dont have kids at home, we are very light users of the washer. First, I would suggest that no one buy this washer. Second, I suggest that Whirlpool should recall these washers. I called Whirlpool and it turns out they clearly know about this issue. The good news is they will offer you a discount on repairs or even on a new machine. The bad news is it will still cost you several hundred dollars to fix their design defect. I suggest that you avoid purchasing Whirlpool products both because of their defective design and because of Whirlpools unwillingness to take responsibility for these problems.

I called the dealers repair department, which said they had not seen this before and it looks defective. I have used the oven less than a dozen times. It is virtually new. They submitted pictures to Whirlpool. The oven surround is not replaceable, so the request is to get a new oven. Whirlpool responded with, This is normal... when the cracks break through, then there is a problem. What?! I have been cooking for over 50 years and have never had this experience before. This product is under warranty. By the time it cracks through, it will be too late to do anything about it. Since when is crazing on the oven bottom natural, especially after only a very few times used? This is defective and Whirlpool is shirking their warranty. I am very dissatisfied.

I bought a Whirlpool Gold refrigerator four years ago, June 2012. Today, 9/20/16, I found out that the ice maker has to be replaced to the tune of $350! The repair person told me that Whirlpool has the worst track record, and of his service calls, he has at least three to five Whirlpool refrigerators per week! This is a terrible lack of quality. When youre spending over $2,000 for a refrigerator, you expect it to work for more than four years. Not only that, but I have e-mailed Whirlpool Customer Service twice and have been ignored completely. This is my last Whirlpool product, and I urge you to stay away from them. Samsung has a much better track record.

I purchased a Whirlpool Gold top freezer refrigerator (G2IXEFMWQ03) in May 2011. Six months later, the freezer began to collect frost and eventually clogged the refrigerator port from freezer. Since cold air from the freezer was not going to fridge, I had to turn down the refrigerator temp to lowest setting. I had a service person come out and replace Adaptive Defrost Control under warranty - it would have cost me around $250. Now roughly 12 months after repair, the defrost issue is back. The part cost me $175, and that is if I install it myself. I called and mailed Whirlpool which was a waste of time. This is the last Whirlpool I plan to purchase. For the same issue to occur in this short time span, it has engineering flaw written all over it.

I absolutely hate this washing machine. When I bought it a couple of years ago I thought it would be great for large items... NOT! It leaves white residue on dark colors but the MOST important issue is going off balance. The lid stays locked and you have to start the cycle from the beginning... What a waste!!! Never again will I get a Whirlpool.

11 months after purchasing my Whirlpool 40 Gal Gas Water Heater N40T61-343 I woke to cold water one morning and found the LED flashing 4 times - high temperature shutdown. Unable to find any reset I called Whirlpool and after a couple questions, was sent a replacement control unit. Happily it arrived 2 days later. I was told then that it was because I had residue in the tank. I had no idea how he determined that because none of his questions even touched on that. Anyway, I had hot water.Nearly a year later now to the day and again I have no hot water. This time the pilot burns very weakly when I try to light it and then goes out. After three attempts I get 7 flashes on the LED - Gas Control Valve Failure, part of the same unit I replaced a year ago. Am calling tomorrow since its too late to go through any tech support steps over the phone that Im reading about on this site and seeing on Youtube. Honestly, I didnt replace the last heater because I had nothing better to do than replace parts on this one annually. No, I will not purchase another Whirlpool unit especially after reading all of the similar if not identical issues others are having.

I spent what I consider to be a lot of money on the Whirlpool Cabrio washer and dryer which I purchased in 2007. Within months, I was getting error messages on the washer, specifically an F51. Thankfully, it was covered by warranty. Whirlpool knew then and there that these things were lemons. The repairman told me he couldnt keep up with fixing that issue. I have since had to replace the motherboard on the washer at a cost of $359, and the idler pulley on the dryer at $221; not to mention the metal catch on the dryer broke. I ordered a plastic one on eBay. I will never buy another Whirlpool product as long as I live! They make junk!

Two Whirlpool washers in six years that the barren in back of tub goes out. When the first one went out in the same month the warranty expired, I was told by a repair man that it was not worth repairing because of the cost. I purchased a brand new Whirlpool and only months later, the same parts are broken on this new front loader. How cheap is the Whirlpool app. made? Whirlpool wants to only send me a tech. to fix washer instead of replacing unit altogether. After all, the unit is only a few months old. I cannot believe I have to deal with this again.

Whirlpool Washer W10740628A - So disappointed! I have made adjustments for a year trying to get clean clothes from this machine. Compared to my previous machine which wore out, I now use more water because only deep water wash provides enough water; I always choose double rinse because if the machine does not clean, I do not trust it to rinse effectively either. I use more Tide than previously per wash; I use more Clorox than previously per wash. Everything from tea towels to heavily soiled jeans show stains and soils after washing. Instructions say not to spread the item in the washer but allow it to stack on itself, so twisted and tangled wet clothes are the result. I try to soak and scrub all visible dirt before I start the machine now; additionally, I use a mop or plunger or my hands to thoroughly immerse the clothes in the washer, somewhat like my mother did in 1950s. What on earth is this about and what is the buyer supposed to do???

I purchased (from Lowes) a Whirlpool water heater in 2010 unaware of the recall and problems a lot of customers were experiencing. I have changed (6) thermocouples the most recent yesterday 2-10-2014. The heater still does not work. Is there any compensation I can receive at this date. If Lowes were aware of the problems with the heaters, how can they still in honest sell these water heaters to the public.

I chose Whirlpool first then my machine became of I wanted a front loading machine with a larger tub. I wanted to be able to wash anything without hesitation. I truly love my wash and dryer. This set is the first set I have ever bought brand new.

WHIRLPOOL REFRIGERATOR MODEL WRF532SMBM01 FRENCH DOOR - Gasket in refrigerator door totally cracked in bottom part and torn on the side only after 2 years and one month of use. I have another Whirlpool refrigerator for 7 years without gasket failure. My other 3 previous refrigerators which I have owned more than 10 years. Each also never had any problems.

I sold my 4 yr old Maytag and bought the Cabrio 3 yrs ago because of all the manufacturer promising advertising. Its a top load with agitator, but it takes 2 hrs to wash a load and buzzes the entire time. So relaxing coming home and spending my evening listening to this buzz, so loud I have to max out my tv to hear it. With 2 hrs spent washing a load, I can only do one per evening. Whirlpool you owe all of us a replacement or a major discount coupon toward another (50%) if you are worth anything at all. You are scum!

This microwave is one of the best Ive ever used. Ive had several brands from generic on up and this one takes the cake. Its very reliable. It works excellent and heats up fast. Ive had no problems with it working to full capacity or any fear of it breaking down. Its pricey but well worth the cost if you want worry-free warming and cooking.

My three month old $2,000 combination microwave-oven works a fine, its the just the details that stink. For example: There is no way to turn off the turntable. Yes! a crappy $40 microwave can do this, but not this one. Liquid got into the middle of the door window. You cant open it up to clean, they want to send a technician to clean that up so you can actually see through the window. How much? $150. How was it possible that Whirlpool did not adequately seal the glass? They dont care, and dont care about how it looks.

These products (Dishwasher, refrigerator, cooktop, and wall ovens) are less than 5 years old and everyone of is in of repair. The cooktop and wall ovens the repair on them would equal the price of a new one. I feel that the products should last more just a few years and also their warranties. This tells me they do not stand by quality of their products.

As a rule, everything I put in it comes out spotless, but I know it is more a function of the detergent than the washer itself. Has nice features but the digital system does not allow you to turn a knob and go to a particular function like the older one, I miss that. Its a standard under the counter dishwasher, plain white with a nice, attractive operating panel with small LED indicators. NEVER put any vinyl, 45 or 78 record into a dishwasher!!! It will dissolve the labels, and if its made of acetate (home recordings) it will destroy it.

Weve had this washer for about 9 months now. We noticed that the loads being washed small or large werent coming out clean. When wash cycle finished items were covered in soap residue and or had large dry spots where water had never touched the area. When our sheets were washed in bulky/sheet cycle and deep water this happened. Maytag sent out repair person to find the water pump went bad, pump was replaced. After repair same bad washing results as stated previously. Maytag then sent out repair person for the second time. This time the main electrical board was replaced. Still after two repairs wash loads are still coming out dirty, soapy, dry in spots in any of the selected wash cycles large or small. Third call to Maytag and a third scheduled repair date coming up in a few day. Over the phone the Maytag employee only words of wisdom was, Did you buy the extended warranty. So unless there is a third failure I believe that this washer is just a poor design.

Two years ago, we purchased a Whirlpool Cabrio Washing Machine from Sears. All of a sudden, it was making sounds in the spin cycle that sounded like a jet airplane taking off. It was terribly loud. We called repair technician, which cost $90, only to find out that the bearing is gone and its going to cost over $500 to fix it. This is absolutely ridiculous! We expected it to last several years, only to find out that we would have to spend almost as much as the washer originally cost in order to fix it. We paid $700 for this machine, two years ago, and I can say that Ive never been more disappointed with a product in my life. My previous washer lasted thirteen years, not to mention my dryer and stove fifteen years, with minimal repairs. I will never buy another Whirlpool appliance again. I have read some other complaints on this consumer affairs website, as well as other sites, regarding this same washer with the same problem on the bearing and cost to repair. If anything, I think Whirlpool should make good on this product and offer something regarding a recall or payment for repair in some form. As far as Im concerned, I will alert everyone I know about Whirlpool appliances and advise them not to purchase it. Now, I either have to pay over $500 to repair my washer or go buy another one. I do not even want this Whirlpool appliance in my house when I can get a washer for cheaper than the cost to repair it.

Clothes never feel clean, feel gritty and linty. See grit in dryer lint container all times after drying clothes. Always use extra rinse to no avail. Worst machine I have ever used in my 82 years. Now itching all over my body.

I bought a Whirlpool gold side by side with freezer on bottom and the ice maker in refrigerator part in March of 2013. Ice maker dropped ice one time. In 5 days Lowes brought me a new one out and swapped it because it was in their 7 day policy. Ok this one worked good for about 2 months. Ice maker quit again. Service came out, changed out some parts that didnt work. 2 months roll by the new parts they ordered came in. Service came out again, put those parts in. Worked for about 3 weeks then stopped again. 3 times new service guy comes out and replaces some more parts and he had the wrong motherboard so guess what, had to order. It took 4 weeks to get it here. They came, put it on. It worked for around 2 months. I asked Whirlpool for my money back, they said that that was not a going to happen. I asked for another refrig, they said they would have to have 3 more service calls on the frig before they could do that. Well I have got a $3000 dollar refrigerator that has no working ice maker and Im sick and tired of the runaround. Whirlpool sucks. I will never buy another thing with their name on it. Matter fact I wouldnt take it if you give it to me. (Why) you ask, because in a short time Im going to have to haul it off for junk and its not going to bring nowhere near what I gave for it at the scrap yard.

I purchased this Cabrio washing machine in December of 2016. I have had a huge amount of trouble with the soap not washing out along with it tangling my clothes. This has to be the worst machine I have ever purchased.

This machine is JUNK and in need of a recall!! DO NOT BUY!!! This was purchased at Lowes for nearly $800 a couple of years ago and what a waste of money. During the first year, they had to send out a tech that told me he was not familiar with top loaders and was not sure why the clothes were not getting clean, nor why they came out with a white residue on the dark clothes. We used the machine cleaner - which the cycles take nearly an hour (how is that efficient?), put in a load of dark clothes WITH NO SOAP and guess what? Then he had me dump in a gallon of vinegar to clean the tub and the wall of the washer and repeated the process and guess what? He informed me that it was just lint. Well, after several visits and using a suggested pin drop of soap, the problem remained. I finally asked him if he was so sure it was lint and not soap residue, would he be willing to taste the lint? It was soap.Obviously after an hour of washing in the efficient washer, the clothes are not getting rinsed. I know this because in just putting in less than ten dark t-shirts, they came out dry!!! He informed me that since he was a contractor for Whirlpool, he was not allowed to continue to come back as he resolved the problem that I was using too much soap! Well, that is only part of the problem. This piece of crap leaks. We not only have a water softener, but a household filter system. In just the last three months, we have replaced the hoses as they are corroding. We were informed by Lowes that the hoses that came with the washers were from China and that they have been replacing them with US made hoses to the customers at no charge due to the amount of returns. Well, those too have been corroding and now I once again have water on the floor.It cost $1.75 to take my clothes to the Laundromat, 26 minutes to wash and ten minutes to get there and back. That is what I have been doing, and using my 23 year old dryer when I get home. It is a shame that the company is not responding to an obvious problem. I only wash two loads in a week - not like I am beating the thing to death with numerous loads or heavy loads. I will not recommend, in fact, I BEG you not to spend your hard earned money on this junk. Buy a $200 washer and if it too craps out in three, four or five years... you are still ahead. You will even save money on headache medication and save your sanity.

Got a fridge Friday night setup, and was not cooling as of Sunday still. Called Best Buy who we got it through and they sent someone out first thing Monday AM to look at it. Per the Whirlpool agreement, the first year has to get serviced through them. Finally got a hold of their service support to get someone scheduled to come on site. 11 days later was the earliest appointment, and they just expected me to deal with no refrigerator for 11 days. I asked of other options, what wait times would be after Whirlpool comes out in 11 days to deem it broken and they repeatedly said I cant give you any what if answers for anything. Were no help at all and just expected me to figure out things for at least 11 days on a brand new 3 day old machine that is broken. The absolute WORST customer experience ever and refuse to buy from them again. Thankfully, Best Buy has a return window so were completely returning it and going with a different brand.

Whirlpool 500galaxy gas water heater - First week ran great. Now Im lighting every day. Called Whirlpool and just getting run around. Had it a month today, still lighting every day. Cant afford to buy another.

I got the works; the stove, dishwasher and refrigerator. I cannot believe all the BS you got to do to baby these appliances. If I had designed this mess... I would not be selling it. Every one of the appliances has a issue... the oven takes a long time just to cook toast. I would send them all back... but from what I have been told this is it. They all suck! I sure wish I had my older appliances back. I see the city dump in their future! I got the black stainless. Believe me I am not happy at all. The repair people have already had to fix or replace parts and I have not had this stuff for 30 days yet.

The washer is a lower priced but basic machine with few bells and whistles. However this is what we wanted. Less tech with less problems so for us it works. Does the job it is required to do. Cycles do take much longer than our old machine did. Probably due to water conservation.

4 years ago, we purchased a Model UMV1160CW-3 over the range microwave. After 14 months the door cracked around the handle and eventually fell off. We made the HUGE mistake of buying the same model for ease of installation thinking that this would be a typical issue. We purchase another duplicate model in April of 2016 and less than 16 months later the same issue occurred. Spoke to customer service on 12/28/2018 and they told me that they would pick up the cost of the parts but I would be responsible for labor which actually exceeded the cost of the microwave. Exceedingly poor-quality product and support. Will not purchase another Whirlpool appliance.

I bought this to provide A/C to our bedroom during a power outage by use of our Gasoline generator. It is very quiet and provide a very cool air flow. The double vent pipes make it efficient and more than capable of cooling out 15 X 25 foor bedroom. Whirlpool has 28,000 employees in the USA.

My washer is at least 15 years old. When we bought it we had two school aged children at home. My husband and I now have an empty-nest and we have not had any service calls or break downs since we purchased this machine. It still cleans our laundry very well and we are getting our moneys worth from this washer.

I bought a Whirlpool range. After 15 months, I hadnt even paid it off yet the oven stopped working properly and then again after two years. These ranges are junk. Dont buy Whirlpool! They dont stand by the product either.

We purchase a Whirlpool duet washing machine 4.5 years ago. Just recently the bearing went on the machine. Took the machine apart to fix and was originally told new parts will be delivered free of charge since this is a common occurrence. 5 weeks later and several phone calls, we were told the part is on back order and they do not make it anymore. Then they send an email to keep us as customers for 15% off. Ridiculous. How do you go from getting parts for free since it is a frequent occurrence to not having the parts at all and getting 15% off for a new product? Why would I want to stay with these false claims? Talk about a slap in the face!

This dishwasher is poorly constructed. I cannot use it now, as the top racks assemblies have both fallen apart and the rack will not hang. The bottom rack is functioning on 1 wheel assembly out of four. And the one that is functioning is a new one I put on it three weeks ago. The dishwasher is 2 years old. I am very disappointed in Whirlpool, and I will certainly not purchase another one when I buy a new dishwasher.

From day one I was not happy with the new auto fill washer, I was told I just needed to get used to it! Well I have tried every cycle available and no matter what I try cloths don’t come out clean, using the deepwash cycle Sheets on top were still dry once cycle was completed!! Give me back my old washer! Washed much much better.

We have a Cabrio washer and dryer. The Washer has had problems since year one. We have just gone through service with Sears to fix a rusted out hinge on the lid. The tech broke the lid trying to drill out the rusted screws. He ordered a new lid and six weeks and one day later came to put the lid on. This was terrible. We were rescheduled two times for our appointment. Today the washer will not start on the cycle when you press the start button. We will never buy another Whirlpool product and not Maytag if what I read is true. Probably will be six more weeks to get this resolved.

I chose based on the current ratings of the machines. They look nice and they can handle large loads. I think EPA has changed wash machines to be back into the 1920s. I put my clothes in and there is no agitator in the center. My clothes come out twisted tightly into little round circles or balls, not much water but now it takes over an hour to wash my clothes. So we are conserving water but using more power, I also have to iron sheets and clothes because they are so twisted and wrinkled. I used to stick my clothes into the washer, select a cycle and go on my way and now I have to answer 5 other selection options, if I dont hold the button in long enough it just turns off.Have we all lost our minds, I think this is going backwards not forwards. I have talked to other women and they agree with me, we HATE these new washer and dryers. The dryer is a little better but not much. Also the tops are concave so your laundry basket falls off, and you cant put your soap on the dryer which is where I am used to having it. Now I have to clean my washer every 30 cycles, iron and it takes all day to do the laundry, yes and they call this progress, really!!! I purchased the Whirlpool Cabrio W10607 425A- SP and dryers Whirlpool W10680129C-SP, these are full size and have the steam options on them and are side by sides.

Its just okay. It doesnt clean as well as I expected to regardless of which dishwasher cleaning brand or type I use. It frequently leaves full residue even if the dishes have been pre-soaked. Even though I have it set to see to it, I feel it leaves too much water on the dishes. It doesnt have a rinse and hold setting. This dishwasher doesnt have any extraordinary features. It just has the features you would expect to find on any dishwasher. The size is average but it handles the amount of dishes I have as a one-person household. Its unobtrusive; nothing sticks out, there is no faux metal on it. Those are all features I like. Its not as quiet as it makes itself out to be. On the whole, I feel this is a very average dishwasher.

I have the same pilot light problems as everybody else. I pulled the burner unit out, and cleaned, and blew everything out, and took a wire brush to the openings on the floor of the unit. I called customer service, and was asked about ventilation. I didnt mention that the heater still didnt work, even when the door to the tin water heater was removed, so venting is not the likely culprit. She authorized a repair that will likely do nothing from the comments I see.The real problem with their customer service, is the apparent stupidity of the computer system. She asked me for the model and ID number. I had to cut through the extra insulation blanked on the tank to get it. However, when I gave it to her, she then asked me if I was ** and if I live at **. If this information was already in the computer, why couldnt there be a search by my name and address, to get the model and serial number. Obviously, I had registered the water heater in the past. Isnt being able to get this information the reason to register in the first place?Now, I have to replace the extra insulation, all because of a stupid inability to create the necessary searches in their customer database. Yes, I could have written the numbers down, but why have the customer registration at all, if it isnt to be used for anything, other than data mining of the customer base.

I would not, at this time, even really give this product 1 star, but that was the lowest rating allowable. We purchased a Whirlpool Gold French Door Refrigerator at Lowes a couple of years ago after our Amana was toasted by a close proximity lightning strike. (It got more than just our frig, but the replacement frig is the only item we have had issues with.) We even got the extended warranty thru Lowes for the unit. Shortly after the extended warranty expired we started having issues with the bottom freezer door icing up. We thought that possibly the grandkids had not shut the freezer. So we cleaned up the ice around the door, but the problem persisted.The ice cream in the freezer was rock solid, to get it out of the container you had to put it in the microwave for a couple of minutes. The items in the frig were also frozen. So we emptied the frig and freezer, unplugged the unit and let it sit for a couple of days with the doors all open. We then plugged it back in and hoped for the best. It seemed to be ok for a couple of days then the ice on the freezer door appeared again. At this point, I contacted Whirlpool to see who was a licensed repair company in our area. I contacted the licensed repair service, explained my issue, they got the model and serial number info and ordered what parts could conceivably be the culprits.The tech came, the unit was frozen up, all the vents in the freezer were showing icing. So he removed the back of the freezer compartment and thawed the unit out. At the same time I mentioned that the ice maker had quit working, he found that the wiring connection was not properly connected and fixed that while he had all the stuff out. After re-assembly he ran all the diagnostic tests Whirlpool lists and found everything passed. Since the boxes of parts had not been opened they could all be returned to stock. So no charge for parts, as he could not find indication that any were needed.So 1 service call at $100 and it appeared that maybe the issue was resolved, not the case. Not even a month later, issue re-occurred. No grandkids had been there, no instance of the freezer possibly left ajar. Another service call, and by the time the tech arrived, since I had unplugged the unit and emptied it again, all the frost/ice was melted. $100 for a service call, tests all came back as nothing indicated as not functioning.So if I dont put too much stuff in the freezer or too much stuff in the frig it will run without freezing up for about a month. Oh and weekly put it into the defrost mode a couple of times. Now it has started making a tic-tic-tic or rat-tat-tat sound to the fun and games. If the noise is non-stop, it only stops when you open the freezer door. Leading me to believe it is a fan. (Correct, I was told by the local Whirlpool licensed repair facility.) I have spent the weekend, again thawing out my unit in hopes that the noise will cease. It is loud enough to be heard at the other end of the house.No such luck, so I spent an unproductive 1-1/2 hours on a call to Whirlpool yesterday. The larger part of the time was on hold waiting to talk with someone, anyone. Due to our unusually high call volume, wait-time is long today. Thank you for your patience. To retain your place in line, do not hang up. Finally, I got a rep named Karen, who sounded like she was almost asleep. She had very little to offer except, Im sorry you are experiencing these problems. I have no record of previous complaints like yours on record for this model of our product.Hello, I found 929 reports of the same issue on Consumer Reports. Oh, you cant believe what you read on the internet was her response to that tidbit. She offered to sell me a Repair Plus 1 Plan for only $359.95. A licensed repair service comes, repairs your unit and the plan gives you ONE YEAR of peace of mind. Lets see... I said... so you are offering me an extended one year warranty? Oh, but it comes with a repair first then one-year peace of mind. Seems that Whirlpool has moved into selling warranty extensions rather than fixing the issues with these Whirlpool Gold French Door refrigerators. With what I have already paid for service calls added to this Repair plus 1 Plan, I would have invested $$$ enough to BUY A NEW FRIG that is not a Whirlpool product.Seems a bit foolish to me. So Whirlpool is not admitting that there is a design or manufacturing problem with these units. Even the ones sold just this year seem to have the same issue. They have not corrected this and it appears they have no intent to do anything about it. She did indicate that they had a known issue with the drain and that a fix was offered for that (a redesigned drain unit could be installed). But since I was not getting ice build up on the bottom of my freezer compartment I did not appear to need the redesigned drain unit. Her evaluation of my issue was that the drain did not appear to be a problem.So after a fruitless call to Whirlpool, oh and they did have my previous emails concerning my issues on file but did not consider my complaints to be part of a known issue, I have the local tech coming back to see if possibly there is something, anything to be done with this refrigerator. So another $100 at least, likely no resolution if the service tests all come up normal again! So when the tech comes, I am going to ask him to contact the service engineer that he is supposed to have the contact info for (per Karen at Whirlpool) and see if he can get any resolution to my issues by using that service engineer.

The Cabrio top load washing machine is a piece of junk, an expensive piece of junk. The only way someone could give this machine a good review is if they work for Whirlpool or they think beating clothes up against a rock in the filthy Ganges River makes them clean.We purchased the HE top loader because we were told that all the problems of the front loaders had been worked out in the new top loaders. What a joke. At least the front loader I had, cleaned the clothes. Since we got the glass top model, I made a movie that shows several items of clothes just sitting on top, not getting wet, not getting moved around, not getting rinsed; therefore, not getting clean.After the wash cycle spins down, the clothes are pinned up against the side and the rinse barely touches them before its final spin. We have several items that had stains left from the soap - yes, we used HE soap, Im not stupid. Never again will I waste my money on a Whirlpool product or anything from Best Buy.

Most of my appliances are Whirlpool - dishwasher, refrigerator, clothed dryer and the Cabrio washer. The washer before this one, I had it for over 10 years and replaced it because of rust (thats another problem with Whirlpool - rust). Now the Cabrio hasnt got all kinds of problems - UL, F1 and jumping. The serviceman asked me for $450 for repair; it included a set of springs for the drum, a new electronic board and a 30-day warranty on parts and labor. Im better off buying a new one (I cant afford at this moment). My wife is scared of the darn thing and refuse to use it so now I have the job of washing and standing guard to make sure the washer doesnt leave the garage. Thank you, Whirlpool - and my refrigerator works fine all rusted.

Bought this from Lowes in 2010 with the 12 yr extended warranty. Have not been able to keep it lit. Takes 4-10 days for repairman just to LOOK AT IT and then he usually has to order a new control valve, taking another 2-4 days (have had the control valve replace 3xs). This means, my husband has to get down at eye level to try to get it to light (hes 63) & if it doesnt light on the 40th try or the cramp in his hand stops him sooner, we have to heat water on the stove, carry it through the house to the bathtub, try to get the temp not too hot or too cool, then hope that our 70 yr old bodies can get down into the tub plus get back out without falling (showers are preferable). My husband bought The best hot water heater $ could buy at our local Lowes store. Because we are getting up there in years, we hoped that this would be the best answer by also getting the extended warranty. They have had numerous repairmen out to our house (6 or 7 last count)... two different men told my husband that they would only be here a couple of minutes knowing it was not going to light for them either. Time wasted. Patience gone. Still they wont replace it because if anyone can get it to light up again, no matter how long that may take, then theres no need to replace it! They have already put more money into parts, labor & repairs than it originally cost. I was told today by the ex. warranty representative that its not considered a lemon! So how do those LOWES/WHIRLPOOL people sleep at night????

I will be brief. Bought Whirlpool ref. model #WRF560Smywo4 on April 15, 2016. The refrigerator quit work July 29, 2016. Called Whirlpool. They responded they had no repairman in our area. After several calls they scheduled a repairman. He came and put on a part. It did not work. Called Whirlpool again. They sent the same repairman. He stated it needed a new compressor. A week later he arrived with the part (August 12, 2016). As of now the refrigerator is working. Now this was two (2) weeks without a refrigerator. This has been a bad experience. I WILL NEVER BUY ANOTHER WHIRLPOOL APPLIANCE AND RECOMMEND THAT YOU DO NOT PURCHASE ONE.

This Whirlpool refrigerator/freezer Model W10314956B was purchased from Lowes on June 29, 2012. Recently noticed rust appearing under ice/water dispenser tray. Requested warranty service, but was told the problem was considered DUE TO WEAR & TEAR! TOTAL COP-OUT! There are NO MOVING PARTS in this area; how can there be WEAR and TEAR? To my mind, this can only be charged as SHODDY MANUFACTURING or INADEQUATE QUALITY CONTROL by the manufacturer.This appliance is only 6 1/2 years old! Consumers expect refrigerators to last much longer than that. The only possible cause for this problem is as stated above: poor quality control by the manufacturing plant, and I completely discount being told the problem was due to WEAR and TEAR! I will think long and hard before I ever even CONSIDER purchasing another Whirlpool product, and maybe YOU SHOULD TOO!One issue that keeps gnawing at me is HOW, since this is supposed to be a STAINLESS STEEL refrigerator, can it rust? The best answer I found on Google was that its likely due to insufficient chromium in the mixture of metals used to make stainless steel. To me this continues to point to shoddy workmanship at the manufacturing plant. I have pictures of the problem, but for some reason Im unable to copy them to this complaint. Probably because Whirlpool is afraid of pictures that confirm their shoddy craftsmanship!

If it were not for the fact that this refrigerator has a defect that Whirlpool has recognized and is replacing the unit for, I would give the unit 5 stars in all areas. I would buy another Whirlpool due largely to the companys willingness to recognize a problem and promptly take corrective action.

The first thing I noticed after purchasing this stove was that the glass top did not clean properly. I used the product given to me by Sears and tried several others but still could not take marks off of the glass top. I never really used the oven that much until retired and started baking often. The self clean does not work at all unless by self clean they mean that you yourself cleans -- I should say scrub it down. I previously had a regular self clean and it truly self cleaned. All I did was take wet paper towel and wipe out. Yet when I asked the Sears saleswoman about how it cleans I was told that it was terrific -- I would not have any problems! What a laugh!

I purchased a 50-gallon Whirlpool natural gas water heater (12 year warranty) from Lowes approx 2.5 years ago. Just before Thanksgiving, the pilot light started going out once a day, then twice a day. Now, I can light the pilot light in Pilot mode but as soon as I release the red button, the flame goes out. I called Whirlpool and received phone troubleshooting support resulting in a recommendation to pick up a new thermocoupler from Lowes which I did. While searching for someone to install (unfortunately Im not that handy), I ran into the thousands of complaints filed about the very same problem Im having over a number of years and right up to todays date. I called Whirlpool back and got the same song and dance. Theyd be happy to help me troubleshoot if I can get the required meters etc. to test devices, do draft tests, etc. They claimed the problems were fixed with the newer model that I have but certainly cant explain why I have exactly the same issue. What they are not willing to do is stand behind their product and get me hot water. Tried calling Lowes and got the response that I have to deal with Whirlpool. It appears that this newer BFG model is just as flawed as the older model and the warranty is pretty much worthless other than getting a few parts. I used to think that Whirlpool products were reasonably good, however, I will never purchase another.