I have had my Whirlpool W10280546B HE washer for 1 1/2 years. For the last year, I have had constant problems with the washer leaving a large amount of residue (in spots) all over my laundry. I have always run my washer as instructed, and I only used HE detergent in the correct amount. This residue appears to be fine lint, but may be lint combined with detergent.I have used the washing machine cleaning tablets and powders, but this has not helped at all. No one seems to have ever heard of this problem. I have to clean off these spots which cover approximately 1/3 of each article with every washing. The dryer helps get some of it off, but not nearly all of it. Any suggestions besides buying another washer of another brand after only 1 1/2 years?!

First one had major problems. The bladder they call it. They took out the whole system out, replaced the tube that goes to the top of the refrigerator which is where it always starts leaking so they worked on it three times, junked it, gave me a new one and here I am again same thing. Ruined my hardwood floor and Im stuck with it. Never again will I buy WHIRLPOOL.

Purchased Whirlpool set from Lowes March 2016. Washing machine is not worth the metal its made from. Clothes are dirtier after the wash. All white linens are ruined! Clothes wont rinse or spin dry. Whirlpool wont reply nor will contracted repair return. The last repairman told us we would be better off taking the clothes out back and wash with hose because the Cabrio is useless and nothing can be done to fix it. I contacted place of purchase (Lowes). They wont help due to not buying warranty thru them. Stuck with the worse washer ever... never again Whirlpool.

We bought our house in December 2010 and the water heater (fg1f4034t3NOV) just started to give me fits. I had the same pilot light problems everyone else encountered. The person at the 877-251-1679 number gave me a good tip and that may have fixed the problem in the short-term. They told me theres a screen for venting on the bottom of the unit and to use a bottle brush after turning off the unit to clean the screen. I did this yesterday and the pilot light has stayed lit. I called the toll-free number and was told the water heater was out of warranty, but they could send me the part to fix the heater at half-price. I ordered it and they waived ground shipping. I hope to have the situation fixed soon. I’m very pleased with the level of service.

We purchased a Duet washer in Feb 2011. On Nov 2011, it started making a very loud noise when it would spin. We contacted the warranty company, not realizing it was still under the manufacturers warranty. The warranty company came out and took a look and claimed it would be about $1500.00 in parts to repair. We contacted whirlpool and they also sent a service person that claimed the same thing. Both service people claimed that the other did something to the machine and it was the others responsibility to fix it. We have contacted whirlpool and the parts have been ordered. We were informed today that they are on backorder and will not be available until some time the middle to the end of January. When asked why they just dont replace the washer, the answer we received was that was not the policy.

Whirlpool Cabrio WTW7340XW washer is a piece of junk! I have had issues since the day I bought it and havent even had some of the failed parts that other people are talking about. It does not save water. I went from 5000 gal to 13000 gal in one month! It doesnt wash clothes. Everything comes out with the same spots they went in with and then some. Light colors come out with what looks like grease spots and whites come out with black spots. I have had it five months and have used six of the monthly cleaning tabs. Clothes get tangled and torn because of the speed of the spin cycle even on delicate. This unit needs to be recalled and redesigned or customers should be offered a different washer of their choice within the price range of this unit.

WARNING: Do not get the warranty plan through Whirlpool if you have stackable washer and dryer, you will have to remove the dryer yourself before they come out to service your appliances. I was willing to pay extra to have them take it down, the contractor said I had to call the extended plan service, yet 6 telephone numbers later to include the complaints department to no avail... Whirlpool contracts out so get your own and you may save a few dollars!

Microwave Hood Combination...moisture sensor failed...potato caught on fire. Service company Whirlpool sent failed to show (Whirlpool selected a repair shop over 100 miles away). 2nd service company told me sensor failed and they would return with new part (ignoring the fact the white microwave was not gray and black) in a few days. If I wanted a new microwave without the dust and ash, I had to call Whirlpool. Whirlpool is ALWAYS experiencing a high volume of calls.Whirlpool states 7 - 14 days (unit on back order of course) for the microwave will arrive. 21 days later..no microwave. More high volume of calls... Whirpool state a repair center has received the microwave on July 31st and should have called me. Said repair center has no record of this transaction. Whirlpool reps claim to have records of my claim...but... they keep asking did we tell you it had been handled? I say read my file... Customer rep says my file is hard to understand (i.e. it is long). But they assure me they are empowered to help me. Maybe they should look up that word.Today...it is not Whirlpool customer service fault! No... It is being handled by a Product Replacement Specialist... Sadly they cannot provide me with any contact info for that Specialist. Empowered but not informed! Lesson: Whirlpool dont buy or if you do... and it catches on fire...just buy a new one... They make it impossible to get a replacement.

I purchased my first Whirlpool washer in 1959 and have been true to the brand since. This was a big mistake when I bought the WTW4950XW0. At first I thought it was the learning curve on my part with the new technology. The very first wash load was dry on the top layer....never got wet. Then there was the blinking red light .....you could never leave the room and expect it to continue to do anything. One solution I found was to unplug the washer....wait 30 seconds and plug in and follow with lifting the lid and then close the lid followed by holding the start button down for several seconds. This worked sometimes.Very noisy....sounds like a plane taking off after the gears shift and lots of clicking and a long pause to have the water to enter the washer. I have run out of patience. I am going to buy another washer today. I called Whirlpool twice for advice and they offered none but a high dollar repair and no compensation for the lemon I had in my home. Enough is enough.

We bought our Whirlpool Refrigerator a little over three years ago. Within a few months we started having problems with the unit. From ice maker issues, cooling and freezing. Initially the frig was covered under Whirlpools 1 year warranty. Then our extended 3 year warranty kicked in through HH Gregg which they supplied for free because of their poor handling of the initial sale. We have lost track in how many times a repair man has come out to work on the refrigerator. In the last year alone its been at least 8 times. The most recent problem had been the freezer not defrosting properly to the point where we had to store food in our neighbors freezer. The repairman has tried everything he knows and is stumped. Well our extended warranty has run out but theyll continue to work on the problem as long as we report the issue within 30 days which creates a whole different set of issues. The extended warranty states they will replace the refrigerator if it has the same problem 3 times. However what they dont tell you is that if you call BEFORE 3 time period its considered a recall and that doesnt count towards the 3 strike rule. We contacted Whirlpool and they wont cover the refrigerator because the repair company isnt on their approved list. Really a Sears repairman isnt approved? So buyer beware of a lemon Whirlpool Frig! They seem to have a way of not covering their product.

This is a top loading, with agitator, purchased from Costco over five years ago. It took some time finding a top loader, which I will always prefer. Very reliable. Have only needed repaired once. Have other Whirlpool appliances, very reliable.. Fridge over 20 years old and no problems, except needing new ice maker. Also, other whirlpool washer we had over 15 years.

My microwave is very reliable and has lasted a very long time. I have never had a problem other than the circular glass plate that broke. It took me a little time to get use to the timer on it which is a little different than other microwaves that I have used. Overall a good buy.

Our less than 3 year old Whirlpool Gold Series 3-door refrigerator (WRF989SDAM00) went up 2 days before Christmas (12/22/17). Service guy looked at it and explained that the compressor was going. We lost food in the freezer since that was the first to lose cooling. We were told the parts alone would be over $600 not including labor, which could be just as much -- the actual repair ticket states a blockage in the cooling lines, needs Sealed System Repair.We understood that trying to repair a Sealed system could create more problems/repairs down the road. In Sep. we had ice build up on the inside of fridge under ice unit, part was a recall under warranty and was replaced, then 2 weeks later they needed to replace an additional part (adapter kit & user interface). It was also making a really loud noise on and off. These parts didnt help completely with the load noise. Ice stated building up again by Thanksgiving but went away before I could call again for service. Dont feel that the replacement parts really took care of that problem. Then the compressor went up.This is a Lemon of a fridge. A real waste of money. So frustrated. We did not purchase an extended warranty so it is basically tough luck for us. We ended up having to shop and then purchase a new fridge (Not Whirlpool and never Whirlpool again) in a few hours and spend money that we did not have budgeted for a big purchase a few days before Christmas. Oh, and there is one more thing, I never realized that a Stainless Steel fridge could RUST, well this one has numerous rust spots on the front door! Junk. I do have images of the rust as well as sound of the noise. I am in if a class action suit is filed!

Whirlpool washer cabrio WTW7800X - Lid broke for the second time in less than a year. It is a defective part. Whirlpool should recall it. I will never buy Whirlpool again. The lid costs more than $200 + labor to replace.

I bought new and both have broken over and over. The oven takes forever to heat up. The fridges ice maker broke and then the defroster in the fridge side broke. Dont buy Whirlpool.

I purchased a washer and dryer through Best Buy. I had already decided on what I wanted and have purchased Whirlpool appliances in the past including washers and dryers. I tried other brands and was disappointed so I wanted to go back to using Whirlpool w/d. I was encouraged to purchase this set because it was on sale. Worst mistake I ever made. I am so disappointed! I wish I could go back and do over. I would have gladly paid more for what I had wanted instead of saving (supposedly) a little money. I personally think they were trying to get rid of these models because they are awful and I have had so many problems doing a job I already dont but this set makes it worse. The washer is constantly off balance I think because you have to be so strict in how you lay in the laundry to the washer! Now the dryer takes even longer to dry my clothes than my twenty year old set (Maytag) which wasnt that bad. Is there any kind of trade-in I could do model: WTW4900B to get the set I really wanted (the models with glass top on washer and glass door on dryer)? I purchased this in April 19 of 2014. I hate it!

I have had to replace my Whirlpool 50-gallon hot water heater 2 times. First time it broke, it caused thousands of dollars’ worth of damages plus Im out a $760.00 deductible. I had the last one just over 1 month and couldnt exchange it at Lowe’s because it’s a few days over a month. So I had to get return authorization before I could return it again. I went through speaking to a hateful CSR. After calling back again, the lady, a real nice lady, helped me. I will never buy another Whirlpool product again, and if anyone is smart, they will stay away from them too. Hateful, hateful CSR. Beware.

I purchased this machine in April and already, the right leg is rusted and the under seam of machine is rusted. I have throw rug under it and where the leg is, there is rust on the rug. I called service from Whirlpool and 2 servicemen came out. The first one told me I was loading it wrong and the water was splashing over the inside tub to rust the leg and I asked, So why is the seam under the machine rusted? No answer. The second one came out and told me he could not find anything wrong with the machine and doesnt know why it is rusting, but he never gave me a paper to sign off on. He also said that maybe it was rusted when it was delivered. Not!!! Then I call P.C. Richard in Watchung, NJ where I bought the machine at and told them about the problem. They sent a serviceman out and he said that the bleach condensation is causing the rust, its known fact that this machine has this problem. He said that the water does not run through the dispenser but there is a model that does. I want a credit on this machine and get the upgraded one. It states on the machine that I can use bleach but it doesnt say it will cause rusting. I want you to tell me how a 9-month-old machine is rusted on one leg and the seam underneath is also rusted!!!! I had a machine for 10 years and it wasnt rusted. I am very unhappy with this product and with the customer service of Whirlpool. This is my first Whirlpool washer and I would not recommend this washer to anyone. I paid $600.00 for this washer and it should not be rusting.

I join the many who have posted about the Whirlpool Cabrio Washer cracked lid issue. Our Whirlpool Cabrio WTW7800XW2 glass-lid washer suffered the same (inevitable) fate – cracked plastic on the lid at the hinge stress points, after the washer was beyond warranty. Same story - runaround/no help from Whirlpool. Finally bit the bullet and shelled out the $200 for a new lid. HOWEVER, I didnt want to just replace it and have the same issue down the road. I removed the spring-loaded units that support the hinges, hoping to just remove the springs to release the pressure. I found that the springs are integral to holding all the components together in this unit. These are extremely heavy-duty extension springs, so I took them to my hardware store (TrueValue) and found springs the exact same length, but with a smaller wire diameter and thus requiring less force to extend. I replaced the original springs with these (Century Spring Corp. - #C-143 - 9/16”x3”x.054”). The lid operates perfectly, and now there is very little resistance at the hinge stress point. The only difference is there is no longer a “damping” effect when lowering the lid - it must be lowered manually rather than being allowed to fall on its own. That’s a small correction in habit, but will ensure that the replacement lid lasts for the life of the washer.

Purchased a whirlpool water heater 04/08/2005 and it worked for a short time. It had a 6 year warranty. I had to replace the thermocoupler assembly 1 time and it worked fine until last week. 09/02/1011, 4 months after warranty ran out, the unit started leaking severely from the top ? (Could of understood the bottom) here. After investigating further and being told to basically pound salt by the warranty number I called, I removed the top cove r(glued on by spray in insulation) and carved away the spray in insulation. All the bosses/threaded fittings for the inlet outlet and anode rod were all leaking under the insulation where it could not be seen! I know for a fact this unit was leaking long before the warranty expired! But because of the way it is built it is impossible to see it!. I strongly feel this was a manufacturing defect and there are hundreds if not thousands of these units in people houses all over the country!

We have had our dishwasher for over ten years and have had no problems. Its been very reliable. Its a free standing unit on wheels with a butcher block top as we dont have room in the cabinets for a built in. All you have to do is roll it over to the sink and plug it in and hook up the water line which has a quick disconnect. The male half always stays on the faucet.

I have never posted a negative product review but must do so now. The refrigerator is 1 1/2 years old at most and has been well taken care of. I noticed today that the finish at either side of the bottom of each refrigerator door handle has a problem. I couldnt tell if the finish was pitting or is just discolored. I called customer service and expected that they would help, especially since we have an extended warranty. Representative number one told me that the extended warranty only covers problems that affect the function of the product. I spoke to her supervisor and then her supervisor. I got plenty of apologies but no support. I offered to send pictures, but they were not even interested in checking out the problem.After speaking to them, I took the handle off and I see now that the handle cut into some sort of film that exists on the metal. (I am not talking about the protective plastic coating that is on the the refrigerator at delivery.) The film is lifting off the surface and creating discoloration. If Whirlpool was at all concerned, I think this issue could be fixed with some sort of gasket to keep the metal handle from cutting into the surface. Im hoping the problem is static, but hard to say what will happen. If they had been interested in trying to understand the cause of the problem, it would have been easier to accept the limitations of the warranty. It would have demonstrated an interest in avoiding this problem for other consumers in the future. My last Whirlpool product. Period. Good luck if you decide to do business with them.

This is one of the best washers I have had 4 years now. The spin cycle is great. Feel almost dry when done. My daughter was going to order this set but cant get them anymore. I guess it is because it is too good of a washer.

I purchased a Whirlpool fridge in September of 2015. In March of 2016 I noticed the Fridge portion was getting too cold. By April 2016 the freezer stopped freezing and fridge started warming up. I reported the issue to Whirlpool and made an appointment. The day of the appointment the first company called and their tech couldnt make it because of a family emergency. They sent another company out instead. That company diagnosed the issue as a faulty chiller and ordered the part and told me they would be in touch. A week goes by with no working fridge and I call them. They say it will be another week for the parts. Two weeks go by - no call. I call them and they say they have the parts and I make an appointment.The day of the appointment I call them to find out what time they will be out and they tell me they dont have all the parts. And when I mention that I have been without a fridge and that I am frustrated that they arent calling me and that I am having to call them back the lady starts yelling at me asking me if I want to cancel my appointment. So I call Whirlpool and ask for another company. They send a company out that is not trained to be working on a sealed unit. So I call Whirlpool back again and they send an in house tech out three days later. This is over about a month without a fridge at this point. Their tech simply recharges the system and says that it should be fine.A week later the freezer stops freezing and the fridge warms up to the point that both are not usable. The tech comes out and diagnoses that there it is most likely the chiller because of a build up of frost in the freezer. Orders the part and a week and a bit later I call Whirlpool up to get an ETA on the parts. They say they have the parts now (no call??) and they schedule an appointment. The tech comes out and puts the part in almost a week later (2 months now) and says that it is still building up frost in an area that it shouldnt and calls tech support back and forth for the next two hours. He leaves saying give it some time to see if it works, but admits to me that it is likely it is leaking in an area that he cant access.So I call up Whirlpool and explain the situation and ask for a new Fridge. It has been two months and the tech by his own admission could not say he fixed the problem and thought the problem maybe somewhere else. After looking at my case and me being on hold back and forth for about a half hour the supervisor says that at this time I need to wait to see if it fails again. And that if it does I need to have a tech back on site to verify. So this will be the seventh time I took time off work, it will be the fourth time the fridge fails and that I will have to throw out groceries. When is enough enough. I am into this now for almost double what the fridge is worth in lost wages and groceries.Do yourself a favour and stay away from Whirlpool!!! If I have to guess the following will happen: five days from now the fridge will stop working again (when the Freon leaks out - same timeline as previously) and then I have to call for a tech (3-4 days) and the tech will come out, determine that it isnt working. I have another conversation with a supervisor asking for a new fridge and they miraculously agree (yeah I know). Then what two weeks, a month... before I get a new fridge. I anticipate that I will have been without a fridge for 3 months before it is all resolved. Ridiculous is all I can say. Whirlpool should be embarrassed.

I bought the Whirlpool Cabrio 5.3 cubic foot washing machine to replace a Samsung equivalent machine. I am so extremely disappointed with it. As a mother of nine (seven of them boys) I need a quality machine. Unfortunately this is not one. The clothes come out of the machine just as dirty as they went in. The pants still have dirt on the knees. I think a rinse in the sink would yield better results. I use the highest soil setting, warmest water fabric will allow, and exclusively Tide detergent. I only fill the tub with half a load (completely voiding the value of large capacity) and yet still have to run clothes through twice.I really don’t have time for this. All the kids clothes have to be inspected before drying. I wish I could go back in time and keep my Samsung which was recalled. I would rather take the risk of an exploding machine than deal with this one any longer. Unfortunately, after spending over $1000 on the washer (and buying the matching dryer) I’m stuck with this useless machine. I hope others don’t make the same mistake I did.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

My Whirlpool microwave oven is terrible. The whole point of a microwave is to cook things faster and make ones life easier. The main problem is food doesnt actually cook due to sensors. Cooking bacon, for example, should be a simple, quick item that easily cooks in a microwave within minutes. Not w/ this Whirlpool! The sensor would not allow the bacon to cook - even after 20 minutes of trying!! Foods such as Bob Evans family sized mashed potatoes cant be cooked either. The sensor in this microwave ensures that only the outer layer is hot while the middle is stone cold. Also, the fan has never worked from day 1, and were now on 6 months of ownership. This wasnt a cheap microwave either, so Im SOL. Please dont make the mistake I made. Dont buy Whirlpool.

I have a 5yr warranty. Im 3yrs in on the 3rd repair. Horrible. This time they cant get the part and Ive been dealing with them for 5 almost 6 months. I spend countless hours on hold trying to get a real person... When I do they send me to someone else where the queue starts over. I paid $400 extra to just have them replace the fridge and its been over a month and they cant even get a new one delivered. Just refund my money! This is beyond the pale. Dale, Sunrise Beach Mo.

I purchased Whirlpool washer in Dec.2017 and used it in winter months only (Nov to March). It kept leaking and had to get appliance repair service for $50 and was told that machine is defective and whirlpool should repair it or replace it. I phoned whirlpool and they told me I have to use their appliance repair shop to evaluate the machine for cost of $130. The inlet valve was leaking and needed replacement for a cost of $253.55 and whirlpool shirked all and any responsibility. Dont buy whirlpool as it is not a good product and service is poor.

After having an expensive front loader (ugh) we purchased the Whirlpool Cabrio top loader (wow)! Best washer ever owned, wouldn’t trade it for any on the market! It has been as great and problem free as the front loader was terrible with cleaning and smell.

Totally worst experience with Whirlpool fridge with 1 year of the purchase. It started having cooling issues. Also it was making noise. When contacted for its replacement the company did not agreed for the same saying would provide free service within warranty period however after that customer will have to pay. Quality of product (shelf life) is too bad in context with the company it belongs to.

We have our stove for over five years and we have had no problems with it over the years. It has a black top and this seems like it is a little harder to clean, but other from that we have had no problems with either stove or oven.

The machine meets our needs and just the right capacity. It has just the right number of selection for proper washing. Very easy to load clothes and remove from the washer. There were a number of colors to select.

I bought a Whirlpool dishwasher in 2008 from Best Buy and purchased the extended warranty through Best Buy. First of all, my complaint is not with Best Buy (model # DU1145XTPBA). I have had nothing but trouble with the unit not filling with water, being noisy, and other problems. And then, my intelligence is insulted by these independent contractors, who are supposed to be appliance repair specialists. I found that far from the truth in most cases. They have a list of patented things that the consumer is doing wrong: not having a hot water heater next to the unit, using too much detergent, not loading it properly, and on and on. They must think we are idiots. I always would run the water from the sink till it got hot before filling. And I am a miser so I use less detergent than what the manufacturer or the detergent package says. Anyway to make a long tale short, it started leaking last week, so I assumed the door seal or some other such thing. But lo and behold, the door is rotted out at the bottom. The black finish has bubbled up and the metal is actually rotting away. I am from up north and it looks like my old Chevy 2 Nova rotted out. I called Whirlpool and spoke with several people and supposedly someone in management. They were, of course, sympathetic but offered no assistance or explanation. They offered to send a factory authorized repairman to replace the door at more than the cost of a new dishwasher. Are we that stupid? They never offered me a voucher for a discount on a new unit, which I am going to have to buy. I would not have accepted it anyway, as my last few experiences with Whirlpool have been dreadful. I will never buy another Whirlpool anything. The name used to stand for a quality product that you could depend on. But now it is like most things are offered to the consumer in this throw away society. And as long as we keep buying inferior products and only expecting them to last a few years, I am afraid that is what we will continue to get. Be vocal and let them know how you feel, even though they are probably yawning on the other side of the phone. They are without compassion and could not care any less. They are just looking for a paycheck and have probably heard a hundred complaints like mine, so its water off the proverbial ducks back. But when its their own job in jeopardy, perhaps they will start passing on these complaints to someone who will be willing to listen. Its a very bad experience and I will never buy Whirlpool again.

House is 3 years old, builder put in all new Whirlpool appliances... first 2 years dishwasher leaked causing 18k in water damages... now the microwave just went out. BUYER BEWARE... DONT BY ANY OF WHIRLPOOL PRODUCTS POO-POO-POO. Unfortunately none of our products were still under warranty, since they were over a year old at the time they broke down. NEVER BUY FROM AGAIN!!! SHAMEFUL COMPANY!!!

(Model WTW5640XW3) Whirlpool Cabrio worked Good for 11 months (just after warranty Expired). Replaced capacitor would not spin, hums loudly and smells like burning Plastic. Then about 2 months after that Lid locked, failed, replaced. 7 months then Actuator failed and now looks like the Main board give up. I dont know where The original parts are made but they are Cheap junk. New technology is crap for Washing machines, gears transmission and Solenoids last a lot longer plus they clean your clothes. And belts and solenoids.

I bought a Whirlpool Dishwasher, Model No. GU3600XTVY in July 2010 for $844.30. In August 2011, it failed to clean dishes. The repairman said it needed a new heating element and computer board which costs $319.92. Today, he installed the new parts and it still wont heat the water! Now he wants to take it in to the shop to check the wiring.My previous Dishwasher was a low quality builder-installed GE that lasted 16 years without repair. If we Americans accept that 1 year is an acceptable life span for consumer products, we will continue to have this type of trash sold to us. Made in America is now the product you dont want to buy.

Model #wfw70hebw Duet washer. Lasted 18 months, replaced one sensor and then find out computer board is toast. Seems this was an issue as I was told there is a CORE deposit on the old board so it can be repaired and resold. WTF? New board (repaired) is almost $300. That is a bunch of bull.

My husband and I bought a brand new front load washer and dryer set in 2011. We have had nothing but issues since the day they were delivered. First off the dryer, needed to be repaired after one load of laundry just went through. We were told that the thermostat went bad... needless to say we have replaced that one thing 4 times since we purchased them. Secondly the washer, this makes me so mad. I have 3 children, 2 of them have allergies and Asthma. I clean my washer regularly with vinegar and a special front loader liquid. I have mold in the areas where I put the liquids in. I have to take them apart every week to make sure they are clean. I leave the drawer open to air dry when Im finished with laundry for the day. I leave the door open and I still get mold everywhere. I do laundry on a daily basis, this should not be happening. Im so disappointed with this brand and I will never buy them again!

Frontload Sport Duet ht: After just 8 years, bearing out on washing machine. Just had repairman out. Cost more to fix than what I purchased it for. I bought both the washer and dryer, thus the reason for the duet. So now I have a good dryer and lost its mate. I am not going to purchase another one. Very disappointed. I will not be purchasing any more Whirlpool products in the future. Off to the laundromat.

Why am I not surprised by this stupid American company? I purchased a brand new fridge in June this year and for the last 5 months I have had about 20 different technician visits by five different technicians who changed almost everything you could possibly imagine - evaporator, control, sensor, compressor, display, etc., etc. And the company still refused to take any responsibilities. They kept telling me that more inspection was needed EVEN AFTER all the technicians said there was NOTHING THEY COULD DO. After having to yell at them for about an hour, they finally realized they had to issue me a new fridge. What a piece of crap they are. Even then when I called back about the exchange, they pretended they could not find my file. WTF??? They really tried EVERYTHING they could not to issue an exchange. Wow. What an incredible company and its customer service. I will never, ever buy another American product - nothing complicated with computerized parts anyway. They are NOT capable of producing such complex machines. They should stick with toasters or juicers - lol. Stupid Americans. LG and Samsung all the way baby!!! ** you Whirlpool.

My front loading machine is moldy and smells terrible ALL THE TIME -- I hate this machine and will never ever buy one like this again. I spend more money on cleaner than I do on actual laundry soap.

I purchased a Cabrio top-loading high efficiency low water washer thinking I was doing something for the environment by saving on water and electricity. After about a month, I noticed that my clothes especially those with stretchable fabric were getting larger. My husband kept telling me I was imagining it. Then the clothes would get all tangled especially the pants with ties on the waistband. At the end of the cycle, the clothes are stuck on the sides of the washer and I have to pull them apart. Even after drying, I have to iron everything even my pillowcases which look like they have shrunk they are so wrinkled. I recently bought some 100% cotton outfits and they are even more wrinkled and are starting to lose their shape. I am now noticing that the stains on the clothing are not coming out even when I use a spot remover and put them through a second time.Now I started to notice an odor coming from the machine and my towels and wash clothes have a sour smell. I paid $600 for this machine and after reading the reviews, I just want to replace it. I am now waiting for it to break down. My husband kept insisting I must be doing something wrong. When it goes into the spin cycle, it bounces all around and I have to push it back in place when it is done. I do not think the clothes are getting rinsed enough so now I put them through a second rinse and always put it on low spin. It doesnt see to matter, it sounds like a rocket ready to take off. Is it even worth it to go back to Lowes where I buy all my appliances?

I have a rental home and my residence, I have purchased a fridge for BOTH places. Within 1.5 years, both of the fridges shelving cracked. Customer service will not do anything to remedy this. It is a known issue with his model of appliance. There are numerous complaints and they DO NOT stand behind heir product. NEVER BUY WHIRLPOOL.

We bought all new Whirlpool Gold appliances for new house. Fridge stopped cooling within 8 months, placed warranty call, couldnt get to us for a couple weeks (this is in July). Was told everyone was having problems...so sent us a brand new fridge...happy!! Little over a year later started having problems with this one and was told no warranty, didnt transfer to new fridge and no one offered to sell us a new one at the time, so repairs were out of our pocket. Had new condenser installed, still no ice, had circuit board installed, got ice but refrigerator section isnt cooling after almost $700 out of pocket...dont waste your money on a Whirlpool. So disappointed.

Bought this microwave combo oven from Lowes. Went to change the charcoal filters, as specified by the owners manual, and the top cover and the side cover fell apart when I removed the filter cover screws. After two appointments the service tech came out for about 5 minutes to tell me that only mechanical failure is covered by the extended warranty which I also purchased from Lowes.The problem with Whirlpool is that they make the top cover, and some other parts, with cheap thin plastic which crumbles when exposed to heat. The repair tech said, Dont worry. Ill see what I can do. And then he left. Actually the warranty booklet said wear and tear is covered in addition to mechanical failure. Its inexplicable to me why any manufacturer would use cheap plastic for an over the range product. And I intend to fight this until I get this appliance repaired under warranty.

I purchased the Cabrio washer and dryer 4 years ago and had no problems until recently. The motor and the harness broke and the cost to repair was almost as much as a new washer. The repairman told me that this is a common problem with all washers that Whirlpool makes as they have the same motor and harness. He gave me a list of all the brands that they make and suggested if I buy one to get an extended warranty. I would not recommend anyone buy an appliance from a company that continues to manufacture faulty products. I wonder if they own the extended warranty company?

Whirlpool Duet Washer - The washer after 14 months started to rumble like a freight train under spinning condition. I call Whirlpool and the answer was to purchase an extended warranty or buy the parts for over $700.00 and pay the tech to fix it for another $250.00. A washer should last more than 14 months. I think the parts and the repair cost more that the price of the washer. This is a rip-off.

The pilot light on our hot water heater will not stay lit. We cant find the custom made Replacement Kit at any local retail locations, including a specialty appliance repair store, Lowe’s or Home Depot. So our only option seems to be waiting for the part to come in the mail. Meanwhile, my two little girls have no hot water in their home! Not because we couldnt afford to pay the gas bill, but because of the piece of junk hot water heater that we purchased and the lousy company that stands behind it!

I am on my second Cabrio. The first one only lasted a few years, but I stayed with the Cabrio line because I didnt want to replace the dryer. That was my first mistake. The second Cabrio washer constantly leaves a white residue on dark clothing. I used an HE detergent, reduced the detergent and put the dark clothes through an extra rinse and still find residue that has to be scraped off. I called Whirlpool on Dec. 19th, 2018 to complain about this and was told there was no history reported of this kind of problem. Then I went on the ConsumerAffairs website to learn that many others have the same residue issue, among many other products. I will not ever purchase a Whirlpool machine of any kind again.

Purchased the Gold Series Dishwasher Model No: WDF730PAYM0 Serial No: F14403489 on Dec 2011, started using it from Jan 2012. All is good until June 2014. It started leaking from the bottom, called Whirlpool - the great bad company. Since it is not under warranty they asked to schedule an appointment with their local authorized rip off service company. Technician come on the service day and told me that it is $120.00 for the service call and Labor and parts are extra, first of all $120.00 to come to my house is first rip off, that is the reason Whirlpool on their website do not give any estimates on the service call.After checking the appliance he said main assembly is bad and needs to replace and that will cost more than the original purchase price - what a ripoff. He asked me to contact Whirlpool, they may help since this is the known issue with this model. Called Whirlpool and mentioned and they said it is too old to continue to operate so they cannot help. Ended up trashing the 2.5 year old dishwasher for the new GE dishwasher. Never buy a Whirlpool ever again even on sale. Whirlpool company is not ethical and not ready to help consumer, would love to see them close their operation in America.

I purchased a Whirlpool 12-gallon point-of-use water heater as a booster when I was going to get a tankless and when we decided that we didnt need a tankless, I tried to get an RA number through the manufacturer so that the store could give me credit, as it says directly on the water heater, Do not return to store. They said there is nothing that they will do and it cant be returned to the store. So, what am I supposed to do with this water heater now? Before I knew this was going to happen, I purchased a 50-gallon Whirlpool water heater as well. So now, I have the 50-gallon that I have had to replace the element for already and I have only had it for less than a month and a half, and the 12-gallon is just sitting in my garage. Im completely irritated with this company and do not recommend anyone to go with this company! This is the worst customer service!

Bought unit from Lowes in july 2017. Shortly after icicles started forming on the roof of the freezer near where the door & frame meet. Called authorized service repair company to have them check out. Tech knew right away what was wrong. Appears Whirlpool has the parts made in China & then assembled in the USA. China has overfilled the freezer door with insulation warping the door. This makes the door seal sag on the bottom & pull away on the right side. No way to repair. Was told they need to order a new freezer door.Weeks later I get a call that Whirlpool cannot get a door replacement!!! Said they will give Lowes a store credit. The floor model at Lowes has the same defect. When Lowes ordered a replacement unit they opened the packing & found that this unit has the same defect. I am replacing with a Frigidaire! Where is the quality control at Whirlpool. Anyone at Whirlpool who puts these units together could not help but see this defect - but ignores it & ships it out anyway. Thats what you get from farming stuff out to China. No excuse on Whirlpools part. Maybe Trump can save Whirlpool.

Whirlpool Cabrio washing machine - We purchased the (best name brand) from Get It Now and all we ever had was problems. We will fill the washer 1/2 full of clothes and the clothes on top would not even get wet. So we have to do it again, to make sure the rest of the clothes were washed. Many times there was white smudge marks on the clothes, sorta like powder (we use only liquid soap that you recommend). Today I washed a child’s bedspread for the 4th time because the stains would not come out (from a cookie). I had to turn the bedspread twice just to get it wet. I used bulk load and heavy duty load and it doesnt work. Your product is a very big disappointment for the price a person has to pay. I will recommend that no one purchase this product. Your people need to do further research on who this machine cleans clothes.

I have had my stove for 3 years and it works fine. However since I have become a grandparent, I have been extremely worried about the chance of being burnt. the problem is once you turn off the burner, it doesnt look any different than it does when not in use. It stays hot for a very long time however. Hot enough to burn or melt anything. There is no blocking a child from reaching up and touching it. I have placed a loaf of bread near it only to have it melt down the side. The burner didnt look hot at all. This was at least 15 min. after turning off the burner. Im not trying to cause issues but I believe this is a real danger, not only at the risk of someone getting a burn but also to the point of an entire family losing their home or even their lives. A simple flammable item being knocked over could start a fire. I ask that someone look into these risk.

First of all, I want to thank all of you who took the time to write all your comments. You have helped educate me in many ways. For one thing, I had no idea that Whirlpool made such bad appliances, or at least water heaters. I pretty much grew up in a Whirlpool household. But that was a long time ago. Things change. Anyway, I too bought a Whirlpool from Lowes about four years ago. It was the top of the line 50 gallon energy saver, and it has had problems staying lit for the whole time I have owned it. Because I read your comments before contacting Whirlpool (this time), I knew exactly what to expect. And that is what I got at first--someone trying to sell me parts via shipping costs. I said no to that, and a rep called and offered to replace the unit, which is exactly what Whirlpool should have done for all of you. I am writing this out of courtesy for Whirlpool. They did the right thing for me, and I truly do appreciate that. On the other hand, Lowes wants $700 to deliver and install the new unit. I live seven miles from the store. They set my other water, the Whirlpool I purchased from them, up in my garage. It is extremely easy to get to, and it is all up to code. In other words, even though they sold me a defective product and profited from both the sale and the delivery, they now want to do it all over again by charging so much for the set up. They did not even offer to prorate the new install. Of course, I will hire and pay a certified plumber to do the job, but I am very sorry to lose Lowes. I have always enjoyed shopping there. Home Depot is just across the street, and even though I have learned not to purchase a water heater, or any major appliance there either, I will go there from now on. Losing my business might not worry Lowes a whole lot, but two years ago I bought $5,000 worth of fencing from them, and God knows how much over the years. If you and I and all the thousands of other unhappy customers would stop going there, they might feel a bit sorry for doing us all so dirty. Agreed? Thanks again, you guys.

I am very impressed with Whirlpool. After seeing my review, they contacted me and offered to send the parts to fix the problem with the LED lights. They sent a Whirlpool authorized repairman to my home with the understanding that since the refrigerator is out of warranty, I would have to pay him. Whirlpool also asked me to return the faulty part so they can research the problem. We are once again happy owners of Whirlpool products. Thank you Whirlpool!

We purchased Whirlpool Gold Accubake, double ovens (gas) in 2005. Since then, we have experienced identical failures (8 to date) during the self-cleaning cycle in which the high temperature burns out the thermal fuse of the ovens. This requires two Sears technicians to repair the unit (it requires two technicians to pull the oven out as the fuse location is in the back of the unit) and leaves us without use of both ovens for approximately 2 weeks (scheduling parts delivery and technicians through Sears home repair is not an expedient process).After checking other consumer product websites, it has become clear to me that there is a known design defect with these ovens in which the thermal fuse is not adequately insulated from the high temperatures during self clean; it therefore trips and burns out during the self-clean cycle. While not having access to ovens for about two weeks/year on average may sound acceptable to Sears, the reality is that the problem has escalated in frequency since purchase. In 2013, we are going on our third repair of the same problem (that makes 6 weeks of non-usable oven time in one year) and Sears will not consider replacing the unit, despite: 1) our obvious dissatisfaction with a lemon unit, 2) a well documented history of the defect with this particular Whirlpool oven and 3) an ongoing and escalating repair cost to Sears (it is under their extended warranty so the repair cost is on them although we did pay for this service up front on our appliances).I would stay away from not only Whirlpool appliances but also Sears as there doesnt seem to be any regard for the customer experience and taking care of a product problem (the right way) with a known defect. Sears has an opportunity to make this problem go away quite easily and retain a customer - fix the problem permanently or just replace the defective unit. Unfortunately, my experience to date with Sears standing behind the products they sell provides me with little confidence that either will happen.

Two days after the one year warranty ran out on our front load washer it started making a terrible noise. Of course the Whirlpool warranty was no longer in effect. The good news I was sold an extended warranty from Nebraska Furniture Mart. Called the Service Provider and was told they will only service the washer if it is not working. After several more calls they scheduled a service call in 10 days. We are a family of four, yes no washer is a problem. Finally the technician showed up and said the main bolt holding the drum assembly in place had broken off. He would have to order the bolt. It is now on backorder for 3 weeks. No washing machine for 4 people and now nearly a month is a pain. Not only did my calls to Whirlpool do nothing but the calls to the third party Warranty Company have been very frustrating. My call to the salesperson at NFM was very helpful, but didn’t help get our washer fixed. This is our second and last set of Whirlpool laundry pairs in less than four years.

I am very disappointed with my purchase of the Whirlpool Refrigerator Model # WRF535SMB. As soon as the warranty ran out, it began having problems with ice build up in the bottom of the freezer. I see this is a common complaint and wish I had read the reviews earlier. The appliance is only 3 1/2 years old. Other complaints - impossible to clean the freezer. Mold build up on the seals. Glass plate shattered in a thousand pieces when I very gently set it on the counter.French doors, white, freezer at the bottom.

After insisting to my husband that I wanted an HE washer with a large capacity so I could wash comforters and such and be ready for a house full of grandkids and visitors (we recently moved and had to leave my washer and dryer in the old house); I have been very disappointed with the washer. It leaves lint residue all over my clothes! Some of them I just cant get off. I live in Colorado and the sun shines almost everyday! I love to hang my clothes outside to dry and get brightened by the sun. Being a mile high makes the clothes even brighter I think!Anyways... back to washer... I have been doing laundry for 40 years. I have 4 grown children and know how to sort, etc... When I wash my darks, the lint that ends up on the shirts and pants... its just ridiculous! I end up scraping it off for about 25 minutes before I can hang them up to dry. On some of the clothes, there are marks where all the lint was and has stayed! Ive tried using less detergent, less fabric softener and always use the extra rinse. Tried setting it on the lowest spin cycle and the highest... Nothing helps. How do I tell my husband I would like to get rid of this and get an good old fashioned washer? I was a maniac for two months doing research and making a great cause to buy these machines!It seems to be a little better if I dry the clothes in the dryer, as the lint is pulled off somewhat, but the marks remain. If anyone has had the same experience and knows what Im doing wrong, or has a solution (other than going back to the basic machine) I would appreciate it so much. Disappointed in Denver.

My French door refrigerator and freezer stopped cooling while under a 5 year warranty. The repairman came out 4 times to fix it over a couple months and I lost the ENTIRE CONTENTS of my refrigerator and freezer 3 separate times! I am a single mom working at a non-profit agency and I had to take 4 DAYS off of work to accommodate the repairman. Finally the repairman notified Whirlpool it could not be fixed and I was told by Whirlpool that it would be replaced under the warranty and I should wait for a call back, which never came. I called back after a few days to speak with the Exchange department and Mindy told me that I had to pay $1600 to get the exchange! When I asked to have the call escalated she flatly refused! What kind of corporation is Whirlpool that would treat customers this way? Never mind that the quality of their products gets worse with every passing year! Made to break so they can force you to buy a new one! Ive been without a refrigerator for 8 days already and cant feed my family properly with no place to store food!

We bought the dishwasher because ours was not a very good quality, and it was a Whirlpool and was larger than our old one. But the arrangement of the bottom shelf doesnt allow for effective placement of larger items. If you wash any large items it doesnt wash the top shelf dishes.

I cant even tell you how disappointed I am. This washer has destroyed my clothes and towels. Ive tried to reach out to company but they want me to call for service. What would I call for? Washer works, it just makes holes in clothes, in towels. There are so many complaints about this. If anyone know how to begin a process like this, please let me know. Trust me, when I write a review about something, its got to be either really good or really bad. I dont have time to write things like this.

This machine (Cabrio) is a piece of junk. It does not fill up with enough water to cover the clothes, even on deep wash and your detergent will still be sitting on top at end of wash and clothes are not clean. It was a $900.00 machine. We need to file a class action law suit. Worthless waste of money. Anyone know of any remedies to get a new machine from Whirlpool or of any class action suits?

We bought a Cabrio washer less than three years ago. I have never felt that it got my clothes clean. The washer recently stopped spinning and agitating. We were told by a very experienced repair technician today that the gear case and bearings in the tub need to be replaced at a cost of $700.00. Needless to say, I am very upset. I called the Whirlpool Company and after being on hold for almost 15 minutes, I was told that my washer is too old to qualify for any help with repair cost or part replacement. My household consists of two adults. We do on average three loads a week. This is an inferior appliance and after this experience I will never purchase another Whirlpool product.

We use a Whirlpool Washing Machine and it is one that came with this apartment provided to us by our employers. My parents had a Whirlpool Washing Machine too and they have had no problems since I have known them to use a Whirlpool. The Whirlpool that we are using has been very reliable in the past 3 years we have been using it. No issues whatsoever! The clothes do come out clean, so it does it's job! It is a top loading washing machine as opposed to the newer front loading ones. I have not used a front loading washing machine, so I do not know how it compares to them. The settings on our Whirlpool are basic and very easy to use. (If you know what you are doing, of course). LOL! Reliable is the word for Whirlpool!!

Purchased a new oven 06/2016- today, I had Sears come and look at the issue. Need a new Control Board/ $750.00. Called Whirlpool, they will not help, or give me an explanation of why this expense is justified. Very dissatisfied with product; will not recommend, nor purchase again.

When we bought our side by side fridge (model GD5RVAXVB02), the manual said to clean the condenser coils if you have excess dust and/or pet hair. We have both. We tried with the vacuum and with a brush but it is impossible to get to the coils because they run side to side instead of front to back. You can only get to the first coil in front. The rest cant be accessed from the front, sides or back. I called to find out how Whirlpool recommended they be cleaned and they could only recommend a vacuum attachment tool (8171579A) to clean the floor below the coils or a coil brush (4210463RW) that cant reach the coils! This design is meant to fail prematurely. They could have easily installed the coils running front to back so they could all be easily cleaned.

We purchased a brand new stainless steel refrigerator in 2013. Our 2 year refrigerator stopped producing ice and the freezer stopped working as well. We called Whirlpool customer service and they said they could not help due to 1 year manufacturer warranty only. We called another company (SoBellas) that charged us $85 to tell us that it is the seal system which should be covered up to 5 years by Whirlpool. The man showed me the Whirlpool refrigerator warranty on Google which states the sealed refrigeration parts are covered up to 5 years. There was no specific model numbers listed which gave me the impression this was a standard warranty for all Whirlpool refrigerators. I explained the situation to Whirlpool customer service including the 5 year warranty that is found on Google for everyone to see. I was told that our refrigerator model number did not qualify for that specific warranty. We ended up having to buy extended warranty for $350 on top of the $85 we already spent. This started July 24, we had to wait until August 10 for Whirlpools warranty company to see us. They checked it and said they had to order parts but he supposedly tweaked it to make our fridge run better.... It made it worse and it ended up completely breaking down. We had to buy ice chest and waited until Thursday August 27th for them to finally come back with parts and fix the refrigerator. I took time off from work once again due to our time slot being between 3 and 5 but the guy didnt even show up until 7:30. I could have worked my normal hours instead of taking more time off! The guy never once called to inform us that he was running late. We kept calling the company to make sure we werent forgotten. The guy told us that everything should be working within 20 hours or so, by Friday our freezer was still not working and no ice either, back to square one! I called Whirlpool customer service once again to explain the situation, nothing could be done. The next available time for them to come back out is September 17 for them to come look at our refrigerator. We have been stuck without ice and a freezer, buying food every other day waiting for our brand new, horrible Whirlpool refrigerator to be fixed. Will never ever buy Whirlpool brand again! Actually, we purchased all brand new Whirlpool appliances... Good luck to us!!!!!

Bought the refrigerator in december 2017. Called them 2 times already and just called them again on sunday. They are coming out friday the 15th again to fixed a leaking problem. The first time was the freezer was freezing up a lot of ice which they claimed it was the rubber on the bottom door of the freezer was not sealing tight enough. Second time the refrigerator was leaking so much water I was literally drying up water everyday and have towels on the floor to prevent my new floor from damage. Leaking starts again same problem. Completely frustrated now. Going to contact Consumers Affairs to see what further action I can take.

Whirlpool realized in 2002 that this was a defective part. In 2005, they recalled the product. I purchased the Hot Water Heater (Model # BFG1F4034T3NOV) in 2006. Being this product was recalled in 2005, why was it still being sold at Lowes and other stores? Why wasnt it pulled from the shelves? Why werent the parts replaced before being sold? The hot water heater stopped producing hot water. I contacted Whirlpool and they said the gas control valve had to be replaced; they gave me a part # and an authorization # and told me I could pick it up at Lowes. I asked about installation, because it is still under warranty. They said they dont service this. I picked up the part and tried to find a plumber to do the work and they said it was too small a job. I had to impose on friends to help me; one is a volunteer fireman. He came out and put on the new part and in doing so, another piece broke. We called Whirlpool and they said they had to replace the manifold door assembly. They overnighted the part. Again, I asked about them servicing this hot water heater and I told them I am a single parent and cant do this work. They said they dont service this item. I then had a handyman come out to try to fix it and he wasnt able to get it to work and now I smelled gas (it cost me $198). I had to call the gas company and they came and said there was a leak and turned it off and gave me a violation. I called the company I have an HVAC contract with and they added the hot water heater to that contract and it cost me $120 more for a year. They finally got it working, I was without hot water for a week. I do not recommend anyone buy products from this company. They are horrible to do business with and their service is awful (the service they dont offer).

IM OLD AND DISABLED WOMAN. Bought a brand new $800 Whirlpool top loader washer and it wont work after not even a month. Called whirlpool and had the worst customer service from Tammy. I have to wait to compose myself to call back cause the washer is junk... F9E1 SENSOR. IM NOT A MAN! Worst customer service. Thought my washer would last longer. Its been 1 hour 45 minutes. Wont turn off. I CANT unplug TAMMY! IF I COULD I WOULD!

We purchased this machine new less than 6 months ago. We found that it is not cleaning our jeans. We cant even work cattle and get our jeans clean. I called Sears and Whirlpool and told them it does not clean our jeans. They said it was under warranty and that they would come out to see if it was working properly. Well they said it was and then sent us a bill for $77. They said Customer Instruct was not covered under warranty. I already read the instructions and I knew how to operate this machine. The technician said this is not the first time he has had this type of complaint. Anyway I am VERY dissatisfied with this washing machine and I want Sears and Whirlpool to take it back and give me a better machine. I want one that can get clothes clean. If you are satisfied with dirty clothes then I guess you will like this machine.

I bought my new Whirlpool Duet washer in April 2011 and the gas steam dryer in May 2011. In October 2011, the washer started to make a loud banging noise when starting the spin cycle. I contacted Whirlpool, and they scheduled a service call and stated that the washer was out of service. I told them it was and that I just bought it in April 2011. They said that the repair guy would need to see the receipt. Well, the A&E Factory service guy came out and said it was the bearings. Whirlpool only replaced the bearings with the whole tube unit and a few other parts. I was never told that all these parts would be mailed to my home, until I got a call from A&E about the tube being on back order. I was told that the part wouldnt be in until November 21, 2011, and it would take another week or more to schedule for a repair guy to come out. I called Whirlpool Executive Office (269-923-5000) and complained about all this. They said thats how it works--they ship everything to the customer and that there was nothing she could do about the back-ordered part. So I called Lowes corporate office and told them what was going on and asked if they could push Whirlpool into fixing my washer faster. About 4 1/2 hours later, I got a call from the assistant store manager; and they said that they would replace my washer with a brand-new one and would have it delivered in 2 days. Now, that was going above and beyond what I thought they would do. Just another reason why Ill continue to be a Lowes customer.Now, here it is, April 2012; and my dryer is leaking water into the drum. On Saturday, I went online and scheduled a service repair for Wednesday, April 25. Today, the 24th, I got a call from VIA that they would be out tomorrow and that I would owe them $120.00 for the service call as my dryer was out of warranty. Here we go once again, having to battle Whirlpool! I really dont give a dang what their dang system tells them about when I bought their product! I know when I bought it. And why did they keep telling me that Im wrong? They did almost to the point of calling me a liar!I called the Executive Office again and had to leave a message. Mark my words, I will never ever buy another Whirlpool product again! I will make sure that I tell everyone who I know at work and at home about the way Whirlpool handles their good customers!

I like the experience of the microwave. Especially because it’s mounted in the wall and easily accessible. User-friendly, easy to use, and pretty self-explanatory. It’s very easy to clean which is something my wife really loves knowing we both are working professionals.

After happily using Maytag washers at my old address for 30 some years, I moved to my current address and in 2006 I purchased a new Maytag. In 2010 I needed service. I was advised it had a bad bearing and was not advised to repair as it would cost well over $600.00. I purchased a Whirlpool Cabrio top loading HE appliance.The Cabrio worked well until one day it made a horrible noise. Although it still worked, I called for service and was told it had a bad bearing and would cost $670.00 to fix and they advised against it. After the service call, it never worked again. I know things dont last like they used to but 4 years is ridiculous. I have been advised that Whirlpool bought Maytag. Is this what to expect from so called reputable companies?

We bought a new brand Whirlpool, ice berg, 2 door refrigerator in 2006. It worked fine for 6 months and then started giving all the problems. Until now, we have repaired it at least 10-15 times with company servicemen and also private repair shops. We are just so tired and frustrated will all that we have gone through because of this fridge. Today, the main door just came out and it is probably the 16th incident. We are hardworking people and take a lot pleasure and find lot of happiness in buying something new. It took us almost 2 years to save money for this new fridge with cost us about Rs. 20,000. But I should mention this that we have already more than Rs. 10,000 in repairs.I am sure this would just be another email in one of your inboxes but wanted to write this and convey the message that we are hurt. We do not want to take any legal actions as middle class men in India do not have the resources to do that. But I would surely not buy anything of your brand going forward and would not suggest anyone for it. Writing this in assumption that you understand the pain middle class men goes through to but something worth Rs. 20k and spends another Rs. 10k for repairs. We had high expectations from your product but that was not to be.Following were the problems we face in last 4 years: 1. Refrigerator not cooling (5-7 times); 2. Top door broken (1 time); 3. Main door broken (1 time); 4. Water leak problems (5-7 times). I hope someone will read this and forward it to concerned department.

Purchased washer Aug 2012 and has increasingly been leaving white residue after wash cycles. Have used the Extra Rinse function to no avail and use half the recommended amount of HE Tide. Now I have to run the Rinse, Drain, Spin function twice with darks to remove the residue. I have also been doing the monthly maintenance which has not helped at all. This machine seriously detracts from the Whirlpool name and if they are unwilling to fix the problem, it only publicly displays the companys integrity.

I purchased the Whirlpool washer and dryer three years ago and I absolutely wish that I hadnt. After three years of use, the bearings on the tub are shot. I need to replace them but it will cost $400.00 to repair. This is the second time that this machine is for repair. I am going to dispose this machine and purchase a new model other than Whirlpool. The overall performance is poor and not as advertised. It does not use enough water and does not wash clothes well enough. At times, you can see that the water never reached parts of the garments. I am totally disappointed in its value and quality.

We purchased Model # WFG231LVQ from Appliance Connections. Its a 5 burner with oven. When my husband went to clean the stove door, the bottom handle fell off because the heat from the oven had melted it brittle. Weve had this stove less than 3 months. Then we see where the clips that hold the glass on the front door have melted. The plate that separates the burner from the oven has bowed and splintered the porcelain. And the oval griddle burner only puts out flames on one side. Whirlpool sends a repairman out. He states that they really make them cheap these days. Writes down the whole list of things wrong with it. Repairman calls us back and reports that Whirlpool only wants to replace the parts. Im afraid to use my oven. I want it replaced or my money back!

I bought a Whirlpool Dryer after reading an excellent review in Consumer Reports, despite it costing more than I wanted to spend. The first thing I noticed was a thump, thump, thump with every rotation of the drum. Then I realized that it took twice as long to dry my laundry as my 45 yr. old GE dryer, which only needed a belt, but which wasnt available anymore. I was disappointed in the Whirlpools performance, but that was only the beginning. One night when the dryer was less than 3 months old, I was in bed for the night and I heard the familiar thump of the dryer running. I went downstairs and could not stop it as it did not respond to anything on the digital control panel. I finally unplugged it. I called Whirlpool and they sent a new control panel, but I had to pay the service man.Not too long after that, the dryer heated up, but the drum would not turn. The serviceman said that it had come off track and he reset it. Shortly after, the door would not stay closed as the clamp that held it shut had fallen inside when I pushed the door closed. I replaced that. Then the drum continued to come disengaged because it was out-of-round. But, of course, the dryer was out of the 90 day warranty period too and a drum replacement would have cost more than the piece of junk was worth. So, I had it put back on for what I told myself would be the last time. Well, it was the last because the control panel went bonkers again and would go on by itself and only ran on one cycle if I plugged it in and unplugged it when it was done. I finally gave up and bought an inexpensive analog GE dryer which I never had any trouble with and dried the clothes in less time with less noise.

Spent the extra money to have a beautiful, slide-in oven. The AquaLift technology just seemed like another plus. After the turkey cooked, just seemed like another oven to clean. The AQUALIFT does not work, except for the bottom of the oven!! A fresh oven cleaner? Only available only. Get this beautiful range, not AQUALIFT TECHNOLOGY. CLEANING with it.

I replaced my hot water heater after 22 years and no problems. We got a 50 gal. gas heater from Lowe’s in 6/2008. In 1/2012, we had no pilot light and an alarm on high temp sensor. Whirlpool sent a new sensor and control valve to replace the bad unit. Here we go again, on 3/2013 - same parts same problems. We now have the cost again to have the parts installed for the second time. I have spent 1/2 the cost to have the parts put in than the cost for the heater. I will never pay for any Whirlpool product again. They are plain junk!

This aqua clean is garbage. Had Whirlpool with heat clean perfect. Now have to clean my oven with self cleaning over easy off. I am so disappointed. I always thought of Whirlpool as a good choice. And have bought Whirlpool before. But not after this. Bad, real bad.

I purchased a washer and dryer stackable about 6 months ago. It is suppose to have warranty but when calling the first time to Whirlpool their system was down and the girl was rude and hung up. Today I called and the only time they can offer is work days Monday-Friday 8-5. However, I live in Texas and work an hour and half away from where I live. I have just been transferred here so limited people known. So in order to get my dryer not even 6 months old fixed I have to accommodate the hours available and miss work. The dryer just stopped heating and stuck on the sensing wet cycle. I am a single parent of a disabled son, so with this said a days work is bills not getting paid. I find this unacceptable for a company as well known and one of the best not able to accommodate someones work hours for pretty much a lemon. It was a brand new dryer and washer.

I lodged a complaint of Microwave problem on 05/11/2011, and up to this date (18/11/2011), I am still waiting for the problem to be solved. I have a 1 year old baby. We cook food for him in it. Due to the microwave not working, he is suffering.

Whirlpool refrigerator are garbage, and their customer service is worse. I will never buy their products again. My refrigerator never worked correctly and destroy all of my food soon after it being delivered.

NOT Even a 1 STAR!!! We spent A LOT of money on a Whirlpool Smart wall oven combo. It has only been installed for about 2 hrs. My husband and I have been trying to figure out why all the features on the Whirlpool app aren’t working. Most of our home has smart features and is connected to our phones so it’s not the fact that we aren’t tech savvy. I finally gave up and decided I’ll call customer service line about it tomorrow when they open. It’s Sunday night so every number we call says it’s outside of business hrs. Then excited to turn on the oven for the first time I turn the oven on and the noise that the fan is making is so loud you can’t even talk over it. The oven has been off for 15 min now but the noise continues. 3000.00 for a huge disappointment. Not to mention the thing is HEAVY. So the thought of us having to remove it and replace it with another does NOT make us happy at all. Best Buy or Whirlpool WILL be the ones doing that. For the trouble and money spent that’s the least they can do. Also family is coming into town for the holiday. We made sure to purchase way ahead of time to be sure we had it, installed it and can use it a few times to get the new smell out of it. Very very upset, angry and disappointed. Now it’s been 10 more minutes and the loud broken fan still won’t even turn off. Now we have to shut it off at the breaker. At this point I don’t think we will be even exchanging it for the same product. I knew we should have bought a Samsung!

Whirlpool® Gold® 5.8CuFt Capacity | GAS Stainless - This was not an inexpensive stove. The self cleaning oven function is a total failure. You are not supposed to use oven cleaner on the glass, it now has obscured the view into the oven. The top of the stove is very difficult or impossible to clean. The knobs are a dangerous issue. They will fall off at the slightest touch and the stainless markers around the knob are just a stick on label. The oven temperature is not accurate. The bottom drawer is completely rust spots on the inside. What more can I say. Oh I know. Whirlpool your quality is a disgrace and I want a refund.

I purchased it new in July 2008 for $550, a single homeowner average 4-5 loads a week. First time it broke down, it was just inside the one-year limited warranty. It broke down again Sept. 2011, the basket separated from spinning mechanism. I learned that after $75+ missing day of work, repair tech quoted cost of repair $885 and a minimum of 10 days waiting for part to arrive.I called Whirlpool, the guy on the phone was nice but told me I was out of luck. Even if I had purchased the 3-year warranty, I would still be out of luck. The washer was manufactured in April 2008. What a piece of junk. Save your money and skip it. I wish I had. Aside: Whirlpool, whatever happened to standing behind your products? I used to think you were a quality brand. Im extremely disappointed and wont be purchasing any of your products in the future.

Just bought Whirlpool refrigerator, stove, and dishwasher. So far, the icemaker doesnt work and so I have no water or ice in the fridge. After four visits from Lowes it is still not resolved. Going on since 11/16/18. After waiting three weeks, the dishwasher came, and lo and behold - it doesnt work. Now I have to wait for one to be ordered! TAKE A WORD OF ADVICE - WHIRLPOOL ISNT WHAT IT USED TO BE. DONT BUY IT!

We have had nothing but problems out of our refrigerator in the past 5 months. We purchased it a year ago in April and they have already replaced 7 parts on it. It still doesn’t freeze, and we have no ice... We will NEVER buy another Whirlpool product ever again!!!

We purchased a Whirlpool Estate Range in 2008, with an extended warranty. We have only moved this range out 2 times since it was installed and the last time was over 2 years ago. This range worked beautifully, no issues whatsoever. Until... tonight, the oven & one burner were being used when suddenly the range started arcing, which blew a hole through the back panel on the stove where the cord hooks to it. It continued to arc and quickly fill the kitchen with black smoke until we could reach the breaker box. The Whirlpool repairman wants to charge $88 dollars just to tell us WHY it happened. After 2 years of sitting in the same spot, why? I dont want the stove repaired, I want it out of my house! I will not take the chance that this will happen again when we are not home. When asked if this was an issue with their product, the repairman answered, I have never heard of anything like this before. After reading these reviews: Such a Liar! I wouldnt believe anything Whirlpool, or their representatives told me about their products now. I just want their crap out of my house and I will never spend another one of my hard-earned dollars with them again. Too many other choices out there. I just want other buyers to Beware of Whirlpool.

Whirlpool water heaters are a disgrace!!!! I have never been so dissatisfied in my life with a product. I bought this water heater 11/2017. Three months later, it was not working. Whirlpool sent an igniter and I had a technician to put it on. This was a short fix because it broke down 2 weeks later. I called customer service and of course they gave me the runaround. I will never ever buy another Whirlpool product. This company is the worst.

Amazing pice. Would recommend to anyone. The heat is great. The oven is amazing. I got this for my birthday and my kids were helping me to get it and I was so excited to receive it I was crying. Amazing machine, wish I had two. Would definitely buy again. I especially love how clean the oven top looks and how the knobs for the burners are easy to use.

I purchased a front load washer and dryer brand new. The washer is under a 2-year warranty on all parts and labor. Since I have purchased them, the washer has had to be fixed on several occasions. I have had 10 parts replaced and had to be out a washer for a month at one given time. I have had the repair company email me all the parts and services that they have done. All I want is a new washer! I have argued with Georges Appliances on several occasions because I believe they sold me the obviously faulty washer and I dont believe that I should be responsible to have to figure it out for myself. They should be responsible to provide me a new one. They told me that I had to contact Whirlpool in order to receive a new washer. Please contact me asap.

It will constantly go off balance. I usually have to wash the cloths twice before they come clean and I have to unload washer and re-load it to get it to possibly spin without going off balance again. It will twist the quilts and fold them under themselves and tear them from the pressure. I have called after 6 months of owning this product and explained to the Lowe’s employee and they said it cannot be returned unless it was broken mechanically. This is the worst piece of crap I have ever own. The last Whirlpool product lasted 12 to 20 years. I hated this thing after the first few washings. I generally have to stop the washer and let it soak and then turn it back on if I want the damn thing to get the dirt out. I am using the required detergent as well. I will never own another top load machine like this. I am trying to unload it. Now, I have to buy another washer because I might as well take the clothes out and beat them on a rock at a creek with this thing.

Whirlpool Cabrio 6600 SW2 - Somehow a coin or two (?) are under the tub. It is not a high pitched sound. Just sounds like the machine is rubbing against the tub or something when it is being used. It does an excellent job of washing and spin drying the clothes, but the noise irritates my wife, which then irritates me. I took the top piece off and can see a coin DOWN there, but cannot reach it. Must I turn the machine upside down and try to shake the coin(s) out?

I hate this washing machine (Whirlpool Cabriolet) with every ounce of my being. That may sound harsh when talking about a washing machine. But, I assure you it is warranted. I have owned many washers in my day. This machine came to me after a family member passed away. The machine was almost new and had not been used very much at all. I found out very quickly that in order to simply wash a load of laundry could take as much as four hours. Every time you go to do laundry you get continuous codes and alarms. So it is a series of trips up and down the stairs to reset the machine, try to equalize the balance, and in many cases I have to unplug the machine and reset it all together. I have researched it extensively. And I have followed the instructions in the manual and from online instructional videos trying to resolve the multiple issues. I cannot wait to get an average everyday washing machine that is not too smart for its own good. I hate, hate, hate this machine!!!